org.apache.poi.xslf.usermodel.XSLFFreeformShape Maven / Gradle / Ivy
The newest version!
/*
* ====================================================================
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
* ====================================================================
*/
package org.apache.poi.xslf.usermodel;
import org.apache.poi.util.Beta;
import org.apache.poi.util.Units;
import org.apache.xmlbeans.XmlObject;
import org.openxmlformats.schemas.drawingml.x2006.main.CTAdjPoint2D;
import org.openxmlformats.schemas.drawingml.x2006.main.CTCustomGeometry2D;
import org.openxmlformats.schemas.drawingml.x2006.main.CTGeomRect;
import org.openxmlformats.schemas.drawingml.x2006.main.CTNonVisualDrawingProps;
import org.openxmlformats.schemas.drawingml.x2006.main.CTPath2D;
import org.openxmlformats.schemas.drawingml.x2006.main.CTPath2DClose;
import org.openxmlformats.schemas.drawingml.x2006.main.CTPath2DCubicBezierTo;
import org.openxmlformats.schemas.drawingml.x2006.main.CTPath2DLineTo;
import org.openxmlformats.schemas.drawingml.x2006.main.CTPath2DMoveTo;
import org.openxmlformats.schemas.drawingml.x2006.main.CTShapeProperties;
import org.openxmlformats.schemas.presentationml.x2006.main.CTShape;
import org.openxmlformats.schemas.presentationml.x2006.main.CTShapeNonVisual;
import java.awt.geom.AffineTransform;
import java.awt.geom.GeneralPath;
import java.awt.geom.PathIterator;
import java.awt.geom.Rectangle2D;
/**
* Represents a custom geometric shape.
* This shape will consist of a series of lines and curves described within a creation path.
*
* @author Yegor Kozlov
*/
@Beta
public class XSLFFreeformShape extends XSLFAutoShape {
/*package*/ XSLFFreeformShape(CTShape shape, XSLFSheet sheet) {
super(shape, sheet);
}
/**
* Set the shape path
*
* @param path shape outline
* @return the number of points written
*/
public int setPath(GeneralPath path) {
CTPath2D ctPath = CTPath2D.Factory.newInstance();
Rectangle2D bounds = path.getBounds2D();
int x0 = Units.toEMU(bounds.getX());
int y0 = Units.toEMU(bounds.getY());
PathIterator it = path.getPathIterator(new AffineTransform());
int numPoints = 0;
ctPath.setH(Units.toEMU(bounds.getHeight()));
ctPath.setW(Units.toEMU(bounds.getWidth()));
while (!it.isDone()) {
double[] vals = new double[6];
int type = it.currentSegment(vals);
switch (type) {
case PathIterator.SEG_MOVETO:
CTAdjPoint2D mv = ctPath.addNewMoveTo().addNewPt();
mv.setX(Units.toEMU(vals[0]) - x0);
mv.setY(Units.toEMU(vals[1]) - y0);
numPoints++;
break;
case PathIterator.SEG_LINETO:
CTAdjPoint2D ln = ctPath.addNewLnTo().addNewPt();
ln.setX(Units.toEMU(vals[0]) - x0);
ln.setY(Units.toEMU(vals[1]) - y0);
numPoints++;
break;
case PathIterator.SEG_CUBICTO:
CTPath2DCubicBezierTo bez = ctPath.addNewCubicBezTo();
CTAdjPoint2D p1 = bez.addNewPt();
p1.setX(Units.toEMU(vals[0]) - x0);
p1.setY(Units.toEMU(vals[1]) - y0);
CTAdjPoint2D p2 = bez.addNewPt();
p2.setX(Units.toEMU(vals[2]) - x0);
p2.setY(Units.toEMU(vals[3]) - y0);
CTAdjPoint2D p3 = bez.addNewPt();
p3.setX(Units.toEMU(vals[4]) - x0);
p3.setY(Units.toEMU(vals[5]) - y0);
numPoints += 3;
break;
case PathIterator.SEG_CLOSE:
numPoints++;
ctPath.addNewClose();
break;
}
it.next();
}
getSpPr().getCustGeom().getPathLst().setPathArray(new CTPath2D[]{ctPath});
setAnchor(bounds);
return numPoints;
}
/**
* Gets the shape path.
*
* The path is translated in the shape's coordinate system, i.e.
* freeform.getPath().getBounds2D() equals to freeform.getAnchor()
* (small discrepancies are possible due to rounding errors)
*
*
* @return the path
*/
public GeneralPath getPath() {
GeneralPath path = new GeneralPath();
Rectangle2D bounds = getAnchor();
CTCustomGeometry2D geom = getSpPr().getCustGeom();
for(CTPath2D spPath : geom.getPathLst().getPathList()){
double scaleW = bounds.getWidth() / Units.toPoints(spPath.getW());
double scaleH = bounds.getHeight() / Units.toPoints(spPath.getH());
for(XmlObject ch : spPath.selectPath("*")){
if(ch instanceof CTPath2DMoveTo){
CTAdjPoint2D pt = ((CTPath2DMoveTo)ch).getPt();
path.moveTo(
(float) (Units.toPoints((Long) pt.getX()) * scaleW),
(float) (Units.toPoints((Long) pt.getY()) * scaleH));
} else if (ch instanceof CTPath2DLineTo){
CTAdjPoint2D pt = ((CTPath2DLineTo)ch).getPt();
path.lineTo((float)Units.toPoints((Long)pt.getX()),
(float)Units.toPoints((Long)pt.getY()));
} else if (ch instanceof CTPath2DCubicBezierTo){
CTPath2DCubicBezierTo bez = ((CTPath2DCubicBezierTo)ch);
CTAdjPoint2D pt1 = bez.getPtArray(0);
CTAdjPoint2D pt2 = bez.getPtArray(1);
CTAdjPoint2D pt3 = bez.getPtArray(2);
path.curveTo(
(float) (Units.toPoints((Long) pt1.getX()) * scaleW),
(float) (Units.toPoints((Long) pt1.getY()) * scaleH),
(float) (Units.toPoints((Long) pt2.getX()) * scaleW),
(float) (Units.toPoints((Long) pt2.getY()) * scaleH),
(float) (Units.toPoints((Long) pt3.getX()) * scaleW),
(float) (Units.toPoints((Long) pt3.getY()) * scaleH) );
} else if (ch instanceof CTPath2DClose){
path.closePath();
}
}
}
// the created path starts at (x=0, y=0).
// The returned path should fit in the bounding rectangle
AffineTransform at = new AffineTransform();
at.translate(bounds.getX(), bounds.getY());
return new GeneralPath(at.createTransformedShape(path));
}
/**
* @param shapeId 1-based shapeId
*/
static CTShape prototype(int shapeId) {
CTShape ct = CTShape.Factory.newInstance();
CTShapeNonVisual nvSpPr = ct.addNewNvSpPr();
CTNonVisualDrawingProps cnv = nvSpPr.addNewCNvPr();
cnv.setName("Freeform " + shapeId);
cnv.setId(shapeId + 1);
nvSpPr.addNewCNvSpPr();
nvSpPr.addNewNvPr();
CTShapeProperties spPr = ct.addNewSpPr();
CTCustomGeometry2D geom = spPr.addNewCustGeom();
geom.addNewAvLst();
geom.addNewGdLst();
geom.addNewAhLst();
geom.addNewCxnLst();
CTGeomRect rect = geom.addNewRect();
rect.setR("r");
rect.setB("b");
rect.setT("t");
rect.setL("l");
geom.addNewPathLst();
return ct;
}
}