com.google.common.truth.DoubleSubject Maven / Gradle / Ivy
/*
* Copyright (c) 2014 Google, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package com.google.common.truth;
import static com.google.common.base.Preconditions.checkArgument;
import static com.google.common.base.Preconditions.checkNotNull;
import static com.google.common.truth.MathUtil.equalWithinTolerance;
import static com.google.common.truth.MathUtil.notEqualWithinTolerance;
import static java.lang.Double.doubleToLongBits;
import javax.annotation.Nullable;
/**
* Propositions for {@link Double} subjects.
*
* @author Kurt Alfred Kluever
*/
public final class DoubleSubject extends ComparableSubject {
private static final long NEG_ZERO_BITS = doubleToLongBits(-0.0);
DoubleSubject(FailureStrategy failureStrategy, @Nullable Double subject) {
super(failureStrategy, subject);
}
/**
* A partially specified proposition about an approximate relationship to a {@code double} subject
* using a tolerance.
*/
public abstract static class TolerantDoubleComparison {
// Prevent subclassing outside of this class
private TolerantDoubleComparison() {}
/**
* Fails if the subject was expected to be within the tolerance of the given value but was not
* or if it was expected not to be within the tolerance but was. The subject and
* tolerance are specified earlier in the fluent call chain.
*/
public abstract void of(double expectedDouble);
/**
* @throws UnsupportedOperationException always
* @deprecated {@link Object#equals(Object)} is not supported on TolerantDoubleComparison. If
* you meant to compare doubles, use {@link #of(double)} instead.
*/
@Deprecated
@Override
public boolean equals(@Nullable Object o) {
throw new UnsupportedOperationException(
"If you meant to compare doubles, use .of(double) instead.");
}
/**
* @throws UnsupportedOperationException always
* @deprecated {@link Object#hashCode()} is not supported on TolerantDoubleComparison
*/
@Deprecated
@Override
public int hashCode() {
throw new UnsupportedOperationException("Subject.hashCode() is not supported.");
}
}
/**
* Prepares for a check that the subject is a finite number within the given tolerance of an
* expected value that will be provided in the next call in the fluent chain.
*
* The check will fail if either the subject or the object is {@link Double#POSITIVE_INFINITY},
* {@link Double#NEGATIVE_INFINITY}, or {@link Double#NaN}. To check for those values, use {@link
* #isPositiveInfinity}, {@link #isNegativeInfinity}, {@link #isNaN}, or (with more generality)
* {@link #isEqualTo}.
*
*
The check will pass if both values are zero, even if one is {@code 0.0} and the other is
* {@code -0.0}. Use {@code #isEqualTo} to assert that a value is exactly {@code 0.0} or that it
* is exactly {@code -0.0}.
*
*
You can use a tolerance of {@code 0.0} to assert the exact equality of finite doubles, but
* often {@link #isEqualTo} is preferable (note the different behaviours around non-finite values
* and {@code -0.0}). See the documentation on {@link #isEqualTo} for advice on when exact
* equality assertions are appropriate.
*
* @param tolerance an inclusive upper bound on the difference between the subject and object
* allowed by the check, which must be a non-negative finite value, i.e. not {@link
* Double#NaN}, {@link Double#POSITIVE_INFINITY}, or negative, including {@code -0.0}
*/
public TolerantDoubleComparison isWithin(final double tolerance) {
return new TolerantDoubleComparison() {
@Override
public void of(double expected) {
Double actual = actual();
checkNotNull(
actual, "actual value cannot be null. tolerance=%s expected=%s", tolerance, expected);
checkTolerance(tolerance);
if (!equalWithinTolerance(actual, expected, tolerance)) {
failWithRawMessage(
"%s and <%s> should have been finite values within <%s> of each other",
actualAsString(), expected, tolerance);
}
}
};
}
/**
* Prepares for a check that the subject is a finite number not within the given tolerance of an
* expected value that will be provided in the next call in the fluent chain.
*
*
The check will fail if either the subject or the object is {@link Double#POSITIVE_INFINITY},
* {@link Double#NEGATIVE_INFINITY}, or {@link Double#NaN}. See {@link #isFinite}, {@link
* #isNotNaN}, or {@link #isNotEqualTo} for checks with other behaviours.
*
*
The check will fail if both values are zero, even if one is {@code 0.0} and the other is
* {@code -0.0}. Use {@code #isNotEqualTo} for a test which fails for a value of exactly zero with
* one sign but passes for zero with the opposite sign.
*
*
You can use a tolerance of {@code 0.0} to assert the exact non-equality of finite doubles,
* but sometimes {@link #isNotEqualTo} is preferable (note the different behaviours around
* non-finite values and {@code -0.0}).
*
* @param tolerance an exclusive lower bound on the difference between the subject and object
* allowed by the check, which must be a non-negative finite value, i.e. not {@code
* Double.NaN}, {@code Double.POSITIVE_INFINITY}, or negative, including {@code -0.0}
*/
public TolerantDoubleComparison isNotWithin(final double tolerance) {
return new TolerantDoubleComparison() {
@Override
public void of(double expected) {
Double actual = actual();
checkNotNull(
actual, "actual value cannot be null. tolerance=%s expected=%s", tolerance, expected);
checkTolerance(tolerance);
if (!notEqualWithinTolerance(actual, expected, tolerance)) {
failWithRawMessage(
"%s and <%s> should have been finite values not within <%s> of each other",
actualAsString(), expected, tolerance);
}
}
};
}
/**
* Asserts that the subject is exactly equal to the given value, with equality defined as by
* {@Double#equals}. This method is not recommended when the code under test is doing any
* kind of arithmetic: use {@link #isWithin} with a suitable tolerance in that case. (Remember
* that the exact result of floating point arithmetic is sensitive to apparently trivial changes
* such as replacing {@code (a + b) + c} with {@code a + (b + c)}, and that unless {@code
* strictfp} is in force even the result of {@code (a + b) + c} is sensitive to the JVM's choice
* of precision for the intermediate result.) This method is recommended when the code under test
* is specified as either copying a value without modification from its input or returning a
* well-defined literal or constant value.
*
*
Note: The assertion {@code isEqualTo(0.0)} fails for an input of {@code -0.0}, and
* vice versa. For an assertion that passes for either {@code 0.0} or {@code -0.0}, use {@link
* #isZero}.
*/
public final void isEqualTo(@Nullable Double other) {
super.isEqualTo(other);
}
/**
* Asserts that the subject is not exactly equal to the given value, with equality defined as by
* {@Double#equals}. See {@link #isEqualTo} for advice on when exact equality is recommended. Use
* {@link #isNotWithin} for an assertion with a tolerance.
*
*
Note: The assertion {@code isNotEqualTo(0.0)} passes for {@code -0.0}, and vice
* versa. For an assertion that fails for either {@code 0.0} or {@code -0.0}, use {@link
* #isNonZero}.
*/
public final void isNotEqualTo(@Nullable Double other) {
super.isNotEqualTo(other);
}
/**
* @deprecated Use {@link #isWithin} or {@link #isEqualTo} instead (see documentation for advice).
*/
@Override
@Deprecated
public final void isEquivalentAccordingToCompareTo(Double other) {
super.isEquivalentAccordingToCompareTo(other);
}
/**
* Ensures that the given tolerance is a non-negative finite value, i.e. not {@code Double.NaN},
* {@code Double.POSITIVE_INFINITY}, or negative, including {@code -0.0}.
*/
static void checkTolerance(double tolerance) {
checkArgument(!Double.isNaN(tolerance), "tolerance cannot be NaN");
checkArgument(tolerance >= 0.0, "tolerance (%s) cannot be negative", tolerance);
checkArgument(
doubleToLongBits(tolerance) != NEG_ZERO_BITS,
"tolerance (%s) cannot be negative",
tolerance);
checkArgument(tolerance != Double.POSITIVE_INFINITY, "tolerance cannot be POSITIVE_INFINITY");
}
/** Asserts that the subject is zero (i.e. it is either {@code 0.0} or {@code -0.0}). */
public final void isZero() {
if (actual() == null || actual().doubleValue() != 0.0) {
fail("is zero");
}
}
/**
* Asserts that the subject is a non-null value other than zero (i.e. it is not {@code 0.0},
* {@code -0.0} or {@code null}).
*/
public final void isNonZero() {
if (actual() == null || actual().doubleValue() == 0.0) {
fail("is non-zero");
}
}
/** Asserts that the subject is {@link Double#POSITIVE_INFINITY}. */
public final void isPositiveInfinity() {
isEqualTo(Double.POSITIVE_INFINITY);
}
/** Asserts that the subject is {@link Double#NEGATIVE_INFINITY}. */
public final void isNegativeInfinity() {
isEqualTo(Double.NEGATIVE_INFINITY);
}
/** Asserts that the subject is {@link Double#NaN}. */
public final void isNaN() {
if (actual() == null || !actual().isNaN()) {
fail("is NaN");
}
}
/**
* Asserts that the subject is finite, i.e. not {@link Double#POSITIVE_INFINITY}, {@link
* Double#NEGATIVE_INFINITY}, or {@link Double#NaN}.
*/
public final void isFinite() {
if (actual() == null || actual().isNaN() || actual().isInfinite()) {
failWithRawMessage("%s should have been finite", actualAsString());
}
}
/**
* Asserts that the subject is a non-null value other than {@link Double#NaN} (but it may be
* {@link Double#POSITIVE_INFINITY} or {@link Double#NEGATIVE_INFINITY}).
*/
public final void isNotNaN() {
if (actual() == null || actual().isNaN()) {
failWithRawMessage("%s should not have been NaN", actualAsString());
}
}
}