com.pivotal.gemfirexd.jdbc.ClientAttribute Maven / Gradle / Ivy
Show all versions of snappydata-store-client Show documentation
/*
* Copyright (c) 2010-2015 Pivotal Software, Inc. All rights reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License"); you
* may not use this file except in compliance with the License. You
* may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
* implied. See the License for the specific language governing
* permissions and limitations under the License. See accompanying
* LICENSE file.
*/
package com.pivotal.gemfirexd.jdbc;
import com.pivotal.gemfirexd.internal.iapi.reference.Property;
import com.pivotal.gemfirexd.internal.shared.common.reference.SQLState;
/**
* List of all the connection properties used by the client driver. Do not put
* any other properties in here since some parts (e.g. ODBC driver) depend on
* getting the full list of available properties by doing a reflection on this
* interface. Client side system properties (starting with "gemfirexd.") are fine
* here since those are ignored by the ODBC driver.
*
* @author swale
* @since 7.0
*/
public interface ClientAttribute {
/**
* The attribute that is used to set the user name.
*/
String USERNAME = com.pivotal.gemfirexd.Attribute.USERNAME_ATTR;
/**
* The attribute that is used to set the user name.
*/
String USERNAME_ALT = com.pivotal.gemfirexd.Attribute.USERNAME_ALT_ATTR;
/**
* The attribute that is used to set the user password.
*/
String PASSWORD = com.pivotal.gemfirexd.Attribute.PASSWORD_ATTR;
/**
* Read timeout for the connection, in seconds. Only for thin client
* connections.
*/
String READ_TIMEOUT = com.pivotal.gemfirexd.Attribute.READ_TIMEOUT;
/**
* TCP KeepAlive IDLE timeout in seconds for the network server and client
* sockets. This is the idle time after which a TCP KeepAlive probe is sent
* over the socket to determine if the other side is alive or not.
*/
String KEEPALIVE_IDLE = com.pivotal.gemfirexd.Attribute.KEEPALIVE_IDLE;
/**
* TCP KeepAlive INTERVAL timeout in seconds for the network server and client
* sockets. This is the time interval between successive TCP KeepAlive probes
* if there is no response to the previous probe ({@link #KEEPALIVE_IDLE}) to
* determine if the other side is alive or not.
*
* Note that this may not be supported by all platforms (e.g. Solaris), in
* which case this will be ignored and an info-level message logged that the
* option could not be enabled on the socket.
*/
String KEEPALIVE_INTVL = com.pivotal.gemfirexd.Attribute.KEEPALIVE_INTVL;
/**
* TCP KeepAlive COUNT for the network server and client sockets. This is the
* number of TCP KeepAlive probes sent before declaring the other side to be
* dead.
*
* Note that this may not be supported by all platforms (e.g. Solaris), in
* which case this will be ignored and an info-level message logged that the
* option could not be enabled on the socket.
*/
String KEEPALIVE_CNT = com.pivotal.gemfirexd.Attribute.KEEPALIVE_CNT;
/**
* Input buffer size to use for client-server sockets.
*/
String SOCKET_INPUT_BUFFER_SIZE =
com.pivotal.gemfirexd.Attribute.SOCKET_INPUT_BUFFER_SIZE;
/**
* Output buffer size to use for client-server sockets.
*/
String SOCKET_OUTPUT_BUFFER_SIZE =
com.pivotal.gemfirexd.Attribute.SOCKET_OUTPUT_BUFFER_SIZE;
/**
* If set to false then no load-balancing is attempted for JDBC client
* connection, else the default is to try and load-balance the new one.
*/
String LOAD_BALANCE = "load-balance";
/**
* Any alternative locators/servers that have to be tried when connecting to a
* distributed system. This affects only the initial connection semantics
* while the list of all the servers available in the system is determined and
* kept updated by the client driver.
*/
String SECONDARY_LOCATORS = "secondary-locators";
/**
* The property used to specify the server groups to use for a connection.
*/
String SERVER_GROUPS = "server-groups";
/**
* The attribute that is used to set client single hop property.
*/
String SINGLE_HOP_ENABLED = "single-hop-enabled";
/**
* The attribute that is used to set the internal connection size per
* network server.
*/
String SINGLE_HOP_MAX_CONNECTIONS = "single-hop-max-connections";
/**
* A connection level property (i.e. needs to be set on each connection) which
* when set to true will disable streaming of results on query node. This will
* make the performance slower and require more memory for large query results
* but with more predictable results in case a server happens to go down while
* iterating over a ResultSet. When this is not set then an SQLException with
* state {@value SQLState#GFXD_NODE_SHUTDOWN_PREFIX} will be
* thrown in case a node happens to go down in the middle of ResultSet
* iteration and application has to retry the query. With this property set,
* GemFireXD will always wait for at least one result from all the nodes and
* disable chunking of results from nodes, so will always transparently
* failover in such a scenario.
*/
String DISABLE_STREAMING = com.pivotal.gemfirexd.Attribute.DISABLE_STREAMING;
/**
* A connection level property if set to true, would skip invocation of
* listeners/writers/DBSynchronizer/AsyncEventListener on server.
*/
String SKIP_LISTENERS = com.pivotal.gemfirexd.Attribute.SKIP_LISTENERS;
/**
* Connection property to skip primary key, foreign key, unique and check
* constraint checks. For the case of primary key, an insert is converted into
* PUT DML so row will retain the last values without throwing a constraint
* violation.
*/
String SKIP_CONSTRAINT_CHECKS =
com.pivotal.gemfirexd.Attribute.SKIP_CONSTRAINT_CHECKS;
/**
* A connection level property to wait for 2nd phase commit to complete on all
* nodes instead of returning as soon as current server's 2nd phase commit is
* done.
*/
String TX_SYNC_COMMITS = com.pivotal.gemfirexd.Attribute.TX_SYNC_COMMITS;
/**
* System property to set {@link #TX_SYNC_COMMITS} for all connections.
*/
String GFXD_TX_SYNC_COMMITS = Property.GFXD_TX_SYNC_COMMITS;
/**
* [SQLFire]: System property to set {@link #TX_SYNC_COMMITS} for all
* connections for old SQLFire product.
*/
String SQLF_TX_SYNC_COMMITS = Property.SQLF_TX_SYNC_COMMITS;
/**
* A connection level property to disable {@link java.sql.Statement#cancel()}
* over thin client.
*/
String DISABLE_THINCLIENT_CANCEL =
com.pivotal.gemfirexd.Attribute.DISABLE_THINCLIENT_CANCEL;
/**
* System property to set to disable {@link java.sql.Statement#cancel()}
* over thin client.
*/
String GFXD_DISABLE_THINCLIENT_CANCEL = Property.GFXD_DISABLE_THINCLINT_CANCEL;
/**
* A connection level property to disable all batching in transactions,
* flushing ops immediately to detect conflicts immediately. Note that this
* can have a significant performance impact so turn this on only if it is
* really required by application for some reason.
*/
String DISABLE_TX_BATCHING = com.pivotal.gemfirexd.Attribute.DISABLE_TX_BATCHING;
/**
* System property to set {@link #DISABLE_TX_BATCHING} for all
* connections.
*/
String GFXD_DISABLE_TX_BATCHING = Property.GFXD_DISABLE_TX_BATCHING;
/**
* [SQLFire] System property to set {@link #DISABLE_TX_BATCHING} for
* all connections for old SQLFire product.
*/
String SQLF_DISABLE_TX_BATCHING = Property.SQLF_DISABLE_TX_BATCHING;
/**
* A connection level property. If set to true, data in HDFS can be queried.
* Otherwise, only in-memory data is queried.
*/
String QUERY_HDFS = com.pivotal.gemfirexd.Attribute.QUERY_HDFS;
/**
* A connection level property. If value greater than zero, rows will be
* batched for NCJ Query. Otherwise, batching will be disabled.
*
* @see com.pivotal.gemfirexd.Attribute#NCJ_BATCH_SIZE
*/
String NCJ_BATCH_SIZE = com.pivotal.gemfirexd.Attribute.NCJ_BATCH_SIZE;
/**
* A connection level property. If value greater than zero, rows will be
* cached with limited size for NCJ Query. Otherwise, caching will be
* disabled.
*
* @see com.pivotal.gemfirexd.Attribute#NCJ_CACHE_SIZE
*/
String NCJ_CACHE_SIZE = com.pivotal.gemfirexd.Attribute.NCJ_CACHE_SIZE;
/**
* A connection level property to disable all table and datadictionary locking
* for operations from the connection. Can only be used by the admin user.
*
* WARNING: USE THIS WITH CARE SINCE IT CAN CAUSE INCONSISTENCIES IN THE
* CLUSTER IF CONCURRENT DDL OPERATIONS ARE BEING EXECUTED FROM ANOTHER
* CONNECTION INTO THE CLUSTER.
*/
String SKIP_LOCKS = com.pivotal.gemfirexd.Attribute.SKIP_LOCKS;
/**
* Property to change the default schema to use for a connection.
* The default schema is normally the user name but this allows changing it.
*/
String DEFAULT_SCHEMA = com.pivotal.gemfirexd.Attribute.DEFAULT_SCHEMA;
/**
* A connection level property to disable query routing.
*/
String ROUTE_QUERY = com.pivotal.gemfirexd.Attribute.ROUTE_QUERY;
/**
* The GemFireXD log file path property.
*
* added by GemStone
*/
String LOG_FILE = com.pivotal.gemfirexd.Attribute.LOG_FILE;
/**
* The GemFireXD log level property.
*/
String LOG_LEVEL = "log-level";
/**
* Log file path to which the initialization nano time is appended.
*/
String LOG_FILE_STAMP = "log-file-ns";
/**
* securityMechanism sets the DRDA mechanism in-use for the client
*/
String CLIENT_SECURITY_MECHANISM =
com.pivotal.gemfirexd.Attribute.CLIENT_SECURITY_MECHANISM;
/**
* traceFile sets the client side trace file. Client driver attribute.
*/
String CLIENT_TRACE_FILE = "traceFile";
/**
* traceDirectory sets the client side trace directory. Client driver
* attribute.
*/
String CLIENT_TRACE_DIRECTORY = "traceDirectory";
/**
* traceFileAppend. Client driver attribute.
*/
String CLIENT_TRACE_APPEND = "traceFileAppend";
/**
* traceLevel. Client driver attribute.
*/
String CLIENT_TRACE_LEVEL = "traceLevel";
/**
* retrieveMessageText. Client driver attribute.
*/
String CLIENT_RETRIEVE_MESSAGE_TEXT = "retrieveMessageText";
/**
* The attribute that is used to set client SSL mode.
*/
String SSL = "ssl";
/**
* System property to denote that the driver is invoked using ODBC API.
*/
String USING_ODBC_DRIVER = com.pivotal.gemfirexd.Attribute.USING_ODBC_DRIVER;
/**
* If true then use TBinaryProtocol for the thrift server, else
* the default is to use TCompactProtocol.
*
* This property can be specified when specifying each thrift server startup
* in FabricService.startThriftServer.
*
* TODO: SW: allow for specifying different protocols for locator control
* connection vs data connection so that locators can always be generic base
* configuration while servers can be mixed as required (e.g. if the cluster
* has to service a mix of SSL and non-SSL clients, then common configuration
* for locators will help use them for all clients if client configuration has
* separate options for locator)
*/
String THRIFT_USE_BINARY_PROTOCOL = "binary-protocol";
/**
* A comma-separated SSL property key=value pairs that can be set for a thrift
* client connection. The available property values are:
*
*
* protocol: Protocol level to use e.g. TLSv1.2, TLS. See
* SSLContext.getInstance(protocol).
*
*
* enabled-protocols: A colon (":") separated list of precise protocols to
* enable for the socket. Note that the "protocol" property specifies a family
* e.g. TLSv1.2 will usually also support TLSv1.1, TLSv1 etc, so this can be
* used to further restrict the enabled protocols. See
* SSLSocket.setEnabledProtocols.
*
*
* cipher-suites: A colon (":") separated list of cipher suites to enable for
* the connection e.g. TLS_RSA_WITH_AES_256_CBC_SHA256. See
* SSLSocket.setEnabledCipherSuites.
*
*
* keystore: Path to the keystore file.
*
*
* keystore-type: Type of the keystore file e.g. JKS. See
* KeyStore.getInstance(type).
*
*
* keystore-password: Password to read the keystore.
*
*
* keymanager-type: Type of the keymanager e.g. . See
* KeyManagerFactory.getInstance(algorithm)
*
*
* truststore: Path to the truststore file.
*
*
* truststore-type: Type of the truststore file e.g. JKS. See
* KeyStore.getInstance(type).
*
*
* truststore-password: Password to read the truststore.
*
*
* trustmanager-type: Type of the trustmanager e.g. . See
* TrustManagerFactory.getInstance(algorithm)
*
*
* client-auth: If true, then require client connections to be authenticated.
* Only applicable for server side connections. See
* SSLSocket.setNeedClientAuth.
*
*
* If this is not specified then default java SSL properties as per
* "-Djavax.net.ssl.*" or system defaults will be used. See JSSE reference
* guide and JCA Providers Documentation for more details of above properties.
*
* This property can be specified when specifying each thrift server startup
* in FabricService.startThriftServer.
*/
String THRIFT_SSL_PROPERTIES = "ssl-properties";
/*
* The security mechanism to use by the thrift driver. Supported values are:
*
*
PLAIN: User name and password sent in plaintext. In addition to user
* and password, a unique random token is generated by server and returned
* to client that is required to be passed to server in every request for
* verification
*
* DIFFIE_HELLMAN: Use Diffie-Hellman key exchange to generate AES
* symmetric encryption keys to encrypt user and password. In addition this
* will also encrypt the random token and refresh at regular intervals.
*/
// String THRIFT_SECURITY_MECHANISM = "security-mechanism";
/**
* The chunk size to be used for fetching/sending BLOBs and CLOBs over
* a connection when using the thrift based JDBC driver.
*/
String THRIFT_LOB_CHUNK_SIZE = "lob-chunk-size";
/**
* Use direct ByteBuffers when reading BLOBs. This will provide higher
* performance avoiding a copy but caller must take care to free the BLOB
* after use else cleanup may happen only in a GC cycle which may be delayed
* due to no particular GC pressure due to direct ByteBuffers.
*/
String THRIFT_LOB_DIRECT_BUFFERS = "lob-direct-buffers";
/**
* Set this to true to force using pre GemFireXD 1.3.0.2 release hashing
* schema. This can be used if client is using {@link #SINGLE_HOP_ENABLED} for
* a connection to a cluster containing pre 1.3.0.2 servers or data files.
*/
String GFXD_USE_PRE1302_HASHCODE = Property.GFXD_USE_PRE1302_HASHCODE;
}