nl.topicus.jdbc.shaded.org.joda.time.MutablePeriod Maven / Gradle / Ivy
Show all versions of spanner-jdbc Show documentation
/*
* Copyright 2001-2011 Stephen Colebourne
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in nl.topicus.jdbc.shaded.com.liance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.nl.topicus.jdbc.shaded.org.licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package nl.topicus.jdbc.shaded.org.joda.time;
import java.nl.topicus.jdbc.shaded.io.Serializable;
import nl.topicus.jdbc.shaded.org.joda.convert.FromString;
import nl.topicus.jdbc.shaded.org.joda.time.base.BasePeriod;
import nl.topicus.jdbc.shaded.org.joda.time.field.FieldUtils;
import nl.topicus.jdbc.shaded.org.joda.time.format.ISOPeriodFormat;
import nl.topicus.jdbc.shaded.org.joda.time.format.PeriodFormatter;
/**
* Standard mutable time period implementation.
*
* A time period is divided into a number of fields, such as hours and seconds.
* Which fields are supported is defined by the PeriodType class.
* The default is the standard period type, which supports years, months, weeks, days,
* hours, minutes, seconds and millis.
*
* When this time period is added to an instant, the effect is of adding each field in turn.
* As a result, this takes into account daylight savings time.
* Adding a time period of 1 day to the day before daylight savings starts will only add
* 23 hours rather than 24 to ensure that the time remains the same.
* If this is not the behaviour you want, then see {@link Duration}.
*
* The definition of a period also affects the equals method. A period of 1
* day is not equal to a period of 24 hours, nor 1 hour equal to 60 minutes.
* This is because periods represent an abstracted definition of a time period
* (eg. a day may not actually be 24 hours, it might be 23 or 25 at daylight
* savings boundary). To nl.topicus.jdbc.shaded.com.are the actual duration of two periods, convert
* both to durations using toDuration, an operation that emphasises that the
* result may differ according to the date you choose.
*
* MutablePeriod is mutable and not thread-safe, unless concurrent threads
* are not invoking mutator methods.
*
* @author Brian S O'Neill
* @author Stephen Colebourne
* @since 1.0
* @see Period
*/
public class MutablePeriod
extends BasePeriod
implements ReadWritablePeriod, Cloneable, Serializable {
/** Serialization version */
private static final long serialVersionUID = 3436451121567212165L;
//-----------------------------------------------------------------------
/**
* Parses a {@code MutablePeriod} from the specified string.
*
* This uses {@link ISOPeriodFormat#standard()}.
*
* @param str the string to parse, not null
* @since 2.0
*/
@FromString
public static MutablePeriod parse(String str) {
return parse(str, ISOPeriodFormat.standard());
}
/**
* Parses a {@code MutablePeriod} from the specified string using a formatter.
*
* @param str the string to parse, not null
* @param formatter the formatter to use, not null
* @since 2.0
*/
public static MutablePeriod parse(String str, PeriodFormatter formatter) {
return formatter.parsePeriod(str).toMutablePeriod();
}
//-----------------------------------------------------------------------
/**
* Creates a zero-length period using the standard period type.
*/
public MutablePeriod() {
super(0L, null, null);
}
/**
* Creates a zero-length period using the specified period type.
*
* @param type which set of fields this period supports
*/
public MutablePeriod(PeriodType type) {
super(0L, type, null);
}
/**
* Create a period from a set of field values using the standard set of fields.
*
* @param hours amount of hours in this period
* @param minutes amount of minutes in this period
* @param seconds amount of seconds in this period
* @param millis amount of milliseconds in this period
*/
public MutablePeriod(int hours, int minutes, int seconds, int millis) {
super(0, 0, 0, 0, hours, minutes, seconds, millis, PeriodType.standard());
}
/**
* Create a period from a set of field values using the standard set of fields.
*
* @param years amount of years in this period
* @param months amount of months in this period
* @param weeks amount of weeks in this period
* @param days amount of days in this period
* @param hours amount of hours in this period
* @param minutes amount of minutes in this period
* @param seconds amount of seconds in this period
* @param millis amount of milliseconds in this period
*/
public MutablePeriod(int years, int months, int weeks, int days,
int hours, int minutes, int seconds, int millis) {
super(years, months, weeks, days, hours, minutes, seconds, millis, PeriodType.standard());
}
/**
* Create a period from a set of field values.
*
* @param years amount of years in this period, which must be zero if unsupported
* @param months amount of months in this period, which must be zero if unsupported
* @param weeks amount of weeks in this period, which must be zero if unsupported
* @param days amount of days in this period, which must be zero if unsupported
* @param hours amount of hours in this period, which must be zero if unsupported
* @param minutes amount of minutes in this period, which must be zero if unsupported
* @param seconds amount of seconds in this period, which must be zero if unsupported
* @param millis amount of milliseconds in this period, which must be zero if unsupported
* @param type which set of fields this period supports, null means AllType
* @throws IllegalArgumentException if an unsupported field's value is non-zero
*/
public MutablePeriod(int years, int months, int weeks, int days,
int hours, int minutes, int seconds, int millis, PeriodType type) {
super(years, months, weeks, days, hours, minutes, seconds, millis, type);
}
/**
* Creates a period from the given millisecond duration using the standard
* set of fields.
*
* Only precise fields in the period type will be used.
* For the standard period type this is the time fields only.
* Thus the year, month, week and day fields will not be populated.
*
* If the duration is small, less than one day, then this method will perform
* as you might expect and split the fields evenly.
*
* If the duration is larger than one day then all the remaining duration will
* be stored in the largest available precise field, hours in this case.
*
* For example, a duration equal to (365 + 60 + 5) days will be converted to
* ((365 + 60 + 5) * 24) hours by this constructor.
*
* For more control over the conversion process, you have two options:
*
* - convert the duration to an {@link Interval}, and from there obtain the period
*
- specify a period type that contains precise definitions of the day and larger
* fields, such as the UTC or precise types.
*
*
* @param duration the duration, in milliseconds
*/
public MutablePeriod(long duration) {
super(duration);
}
/**
* Creates a period from the given millisecond duration.
*
* Only precise fields in the period type will be used.
* Imprecise fields will not be populated.
*
* If the duration is small then this method will perform
* as you might expect and split the fields evenly.
*
* If the duration is large then all the remaining duration will
* be stored in the largest available precise field.
* For details as to which fields are precise, review the period type javadoc.
*
* @param duration the duration, in milliseconds
* @param type which set of fields this period supports, null means standard
*/
public MutablePeriod(long duration, PeriodType type) {
super(duration, type, null);
}
/**
* Creates a period from the given millisecond duration using the standard
* set of fields.
*
* Only precise fields in the period type will be used.
* Imprecise fields will not be populated.
*
* If the duration is small then this method will perform
* as you might expect and split the fields evenly.
*
* If the duration is large then all the remaining duration will
* be stored in the largest available precise field.
* For details as to which fields are precise, review the period type javadoc.
*
* @param duration the duration, in milliseconds
* @param chronology the chronology to use to split the duration, null means ISO default
*/
public MutablePeriod(long duration, Chronology chronology) {
super(duration, null, chronology);
}
/**
* Creates a period from the given millisecond duration.
*
* Only precise fields in the period type will be used.
* Imprecise fields will not be populated.
*
* If the duration is small then this method will perform
* as you might expect and split the fields evenly.
*
* If the duration is large then all the remaining duration will
* be stored in the largest available precise field.
* For details as to which fields are precise, review the period type javadoc.
*
* @param duration the duration, in milliseconds
* @param type which set of fields this period supports, null means standard
* @param chronology the chronology to use to split the duration, null means ISO default
*/
public MutablePeriod(long duration, PeriodType type, Chronology chronology) {
super(duration, type, chronology);
}
/**
* Creates a period from the given interval endpoints using the standard
* set of fields.
*
* @param startInstant interval start, in milliseconds
* @param endInstant interval end, in milliseconds
*/
public MutablePeriod(long startInstant, long endInstant) {
super(startInstant, endInstant, null, null);
}
/**
* Creates a period from the given interval endpoints.
*
* @param startInstant interval start, in milliseconds
* @param endInstant interval end, in milliseconds
* @param type which set of fields this period supports, null means standard
*/
public MutablePeriod(long startInstant, long endInstant, PeriodType type) {
super(startInstant, endInstant, type, null);
}
/**
* Creates a period from the given interval endpoints using the standard
* set of fields.
*
* @param startInstant interval start, in milliseconds
* @param endInstant interval end, in milliseconds
* @param chrono the chronology to use, null means ISO in default zone
*/
public MutablePeriod(long startInstant, long endInstant, Chronology chrono) {
super(startInstant, endInstant, null, chrono);
}
/**
* Creates a period from the given interval endpoints.
*
* @param startInstant interval start, in milliseconds
* @param endInstant interval end, in milliseconds
* @param type which set of fields this period supports, null means standard
* @param chrono the chronology to use, null means ISO in default zone
*/
public MutablePeriod(long startInstant, long endInstant, PeriodType type, Chronology chrono) {
super(startInstant, endInstant, type, chrono);
}
/**
* Creates a period from the given interval endpoints using the standard
* set of fields.
*
* The chronology of the start instant is used, unless that is null when the
* chronology of the end instant is used instead.
*
* @param startInstant interval start, null means now
* @param endInstant interval end, null means now
*/
public MutablePeriod(ReadableInstant startInstant, ReadableInstant endInstant) {
super(startInstant, endInstant, null);
}
/**
* Creates a period from the given interval endpoints.
*
* The chronology of the start instant is used, unless that is null when the
* chronology of the end instant is used instead.
*
* @param startInstant interval start, null means now
* @param endInstant interval end, null means now
* @param type which set of fields this period supports, null means AllType
*/
public MutablePeriod(ReadableInstant startInstant, ReadableInstant endInstant, PeriodType type) {
super(startInstant, endInstant, type);
}
/**
* Creates a period from the given start point and the duration.
*
* @param startInstant the interval start, null means now
* @param duration the duration of the interval, null means zero-length
*/
public MutablePeriod(ReadableInstant startInstant, ReadableDuration duration) {
super(startInstant, duration, null);
}
/**
* Creates a period from the given start point and the duration.
*
* @param startInstant the interval start, null means now
* @param duration the duration of the interval, null means zero-length
* @param type which set of fields this period supports, null means standard
*/
public MutablePeriod(ReadableInstant startInstant, ReadableDuration duration, PeriodType type) {
super(startInstant, duration, type);
}
/**
* Creates a period from the given duration and end point.
*
* @param duration the duration of the interval, null means zero-length
* @param endInstant the interval end, null means now
*/
public MutablePeriod(ReadableDuration duration, ReadableInstant endInstant) {
super(duration, endInstant, null);
}
/**
* Creates a period from the given duration and end point.
*
* @param duration the duration of the interval, null means zero-length
* @param endInstant the interval end, null means now
* @param type which set of fields this period supports, null means standard
*/
public MutablePeriod(ReadableDuration duration, ReadableInstant endInstant, PeriodType type) {
super(duration, endInstant, type);
}
/**
* Creates a period by converting or copying from another object.
*
* The recognised object types are defined in
* {@link nl.topicus.jdbc.shaded.org.joda.time.convert.ConverterManager ConverterManager} and
* include ReadablePeriod, ReadableInterval and String.
* The String formats are described by {@link ISOPeriodFormat#standard()}.
*
* @param period period to convert
* @throws IllegalArgumentException if period is invalid
* @throws UnsupportedOperationException if an unsupported field's value is non-zero
*/
public MutablePeriod(Object period) {
super(period, null, null);
}
/**
* Creates a period by converting or copying from another object.
*
* The recognised object types are defined in
* {@link nl.topicus.jdbc.shaded.org.joda.time.convert.ConverterManager ConverterManager} and
* include ReadablePeriod, ReadableInterval and String.
* The String formats are described by {@link ISOPeriodFormat#standard()}.
*
* @param period period to convert
* @param type which set of fields this period supports, null means use converter
* @throws IllegalArgumentException if period is invalid
* @throws UnsupportedOperationException if an unsupported field's value is non-zero
*/
public MutablePeriod(Object period, PeriodType type) {
super(period, type, null);
}
/**
* Creates a period by converting or copying from another object.
*
* The recognised object types are defined in
* {@link nl.topicus.jdbc.shaded.org.joda.time.convert.ConverterManager ConverterManager} and
* include ReadablePeriod, ReadableInterval and String.
* The String formats are described by {@link ISOPeriodFormat#standard()}.
*
* @param period period to convert
* @param chrono the chronology to use, null means ISO in default zone
* @throws IllegalArgumentException if period is invalid
* @throws UnsupportedOperationException if an unsupported field's value is non-zero
*/
public MutablePeriod(Object period, Chronology chrono) {
super(period, null, chrono);
}
/**
* Creates a period by converting or copying from another object.
*
* The recognised object types are defined in
* {@link nl.topicus.jdbc.shaded.org.joda.time.convert.ConverterManager ConverterManager} and
* include ReadablePeriod, ReadableInterval and String.
* The String formats are described by {@link ISOPeriodFormat#standard()}.
*
* @param period period to convert
* @param type which set of fields this period supports, null means use converter
* @param chrono the chronology to use, null means ISO in default zone
* @throws IllegalArgumentException if period is invalid
* @throws UnsupportedOperationException if an unsupported field's value is non-zero
*/
public MutablePeriod(Object period, PeriodType type, Chronology chrono) {
super(period, type, chrono);
}
//-----------------------------------------------------------------------
/**
* Clears the period, setting all values back to zero.
*/
public void clear() {
super.setValues(new int[size()]);
}
/**
* Sets the value of one of the fields by index.
*
* @param index the field index
* @param value the new value for the field
* @throws IndexOutOfBoundsException if the index is invalid
*/
public void setValue(int index, int value) {
super.setValue(index, value);
}
/**
* Sets the value of one of the fields.
*
* The field type specified must be one of those that is supported by the period.
*
* @param field a DurationFieldType instance that is supported by this period, not null
* @param value the new value for the field
* @throws IllegalArgumentException if the field is null or not supported
*/
public void set(DurationFieldType field, int value) {
super.setField(field, value);
}
/**
* Sets all the fields in one go from another ReadablePeriod.
*
* @param period the period to set, null means zero length period
* @throws IllegalArgumentException if an unsupported field's value is non-zero
*/
public void setPeriod(ReadablePeriod period) {
super.setPeriod(period);
}
/**
* Sets all the fields in one go.
*
* @param years amount of years in this period, which must be zero if unsupported
* @param months amount of months in this period, which must be zero if unsupported
* @param weeks amount of weeks in this period, which must be zero if unsupported
* @param days amount of days in this period, which must be zero if unsupported
* @param hours amount of hours in this period, which must be zero if unsupported
* @param minutes amount of minutes in this period, which must be zero if unsupported
* @param seconds amount of seconds in this period, which must be zero if unsupported
* @param millis amount of milliseconds in this period, which must be zero if unsupported
* @throws IllegalArgumentException if an unsupported field's value is non-zero
*/
public void setPeriod(int years, int months, int weeks, int days,
int hours, int minutes, int seconds, int millis) {
super.setPeriod(years, months, weeks, days, hours, minutes, seconds, millis);
}
/**
* Sets all the fields in one go from an interval using the ISO chronology
* and dividing the fields using the period type.
*
* @param interval the interval to set, null means zero length
* @throws ArithmeticException if the set exceeds the capacity of the period
*/
public void setPeriod(ReadableInterval interval) {
if (interval == null) {
setPeriod(0L);
} else {
Chronology chrono = DateTimeUtils.getChronology(interval.getChronology());
setPeriod(interval.getStartMillis(), interval.getEndMillis(), chrono);
}
}
/**
* Sets all the fields in one go from two instants representing an interval.
*
* The chronology of the start instant is used, unless that is null when the
* chronology of the end instant is used instead.
*
* @param start the start instant, null means now
* @param end the end instant, null means now
* @throws ArithmeticException if the set exceeds the capacity of the period
*/
public void setPeriod(ReadableInstant start, ReadableInstant end) {
if (start == end) {
setPeriod(0L);
} else {
long startMillis = DateTimeUtils.getInstantMillis(start);
long endMillis = DateTimeUtils.getInstantMillis(end);
Chronology chrono = DateTimeUtils.getIntervalChronology(start, end);
setPeriod(startMillis, endMillis, chrono);
}
}
/**
* Sets all the fields in one go from a millisecond interval using ISOChronology
* and dividing the fields using the period type.
*
* @param startInstant interval start, in milliseconds
* @param endInstant interval end, in milliseconds
* @throws ArithmeticException if the set exceeds the capacity of the period
*/
public void setPeriod(long startInstant, long endInstant) {
setPeriod(startInstant, endInstant, null);
}
/**
* Sets all the fields in one go from a millisecond interval.
*
* @param startInstant interval start, in milliseconds
* @param endInstant interval end, in milliseconds
* @param chrono the chronology to use, null means ISO chronology
* @throws ArithmeticException if the set exceeds the capacity of the period
*/
public void setPeriod(long startInstant, long endInstant, Chronology chrono) {
chrono = DateTimeUtils.getChronology(chrono);
setValues(chrono.get(this, startInstant, endInstant));
}
/**
* Sets all the fields in one go from a duration dividing the
* fields using the period type.
*
* When dividing the duration, only precise fields in the period type will be used.
* For large durations, all the remaining duration will be stored in the largest
* available precise field.
*
* @param duration the duration to set, null means zero length
* @throws ArithmeticException if the set exceeds the capacity of the period
*/
public void setPeriod(ReadableDuration duration) {
setPeriod(duration, null);
}
/**
* Sets all the fields in one go from a duration dividing the
* fields using the period type.
*
* When dividing the duration, only precise fields in the period type will be used.
* For large durations, all the remaining duration will be stored in the largest
* available precise field.
*
* @param duration the duration to set, null means zero length
* @param chrono the chronology to use, null means ISO default
* @throws ArithmeticException if the set exceeds the capacity of the period
*/
public void setPeriod(ReadableDuration duration, Chronology chrono) {
long durationMillis = DateTimeUtils.getDurationMillis(duration);
setPeriod(durationMillis, chrono);
}
/**
* Sets all the fields in one go from a millisecond duration dividing the
* fields using the period type.
*
* When dividing the duration, only precise fields in the period type will be used.
* For large durations, all the remaining duration will be stored in the largest
* available precise field.
*
* @param duration the duration, in milliseconds
* @throws ArithmeticException if the set exceeds the capacity of the period
*/
public void setPeriod(long duration) {
setPeriod(duration, null);
}
/**
* Sets all the fields in one go from a millisecond duration.
*
* When dividing the duration, only precise fields in the period type will be used.
* For large durations, all the remaining duration will be stored in the largest
* available precise field.
*
* @param duration the duration, in milliseconds
* @param chrono the chronology to use, null means ISO chronology
* @throws ArithmeticException if the set exceeds the capacity of the period
*/
public void setPeriod(long duration, Chronology chrono) {
chrono = DateTimeUtils.getChronology(chrono);
setValues(chrono.get(this, duration));
}
//-----------------------------------------------------------------------
/**
* Adds to the value of one of the fields.
*
* The field type specified must be one of those that is supported by the period.
*
* @param field a DurationFieldType instance that is supported by this period, not null
* @param value the value to add to the field
* @throws IllegalArgumentException if the field is null or not supported
*/
public void add(DurationFieldType field, int value) {
super.addField(field, value);
}
/**
* Adds a period to this one by adding each field in turn.
*
* @param period the period to add, null means add nothing
* @throws IllegalArgumentException if the period being added contains a field
* not supported by this period
* @throws ArithmeticException if the addition exceeds the capacity of the period
*/
public void add(ReadablePeriod period) {
super.addPeriod(period);
}
/**
* Adds to each field of this period.
*
* @param years amount of years to add to this period, which must be zero if unsupported
* @param months amount of months to add to this period, which must be zero if unsupported
* @param weeks amount of weeks to add to this period, which must be zero if unsupported
* @param days amount of days to add to this period, which must be zero if unsupported
* @param hours amount of hours to add to this period, which must be zero if unsupported
* @param minutes amount of minutes to add to this period, which must be zero if unsupported
* @param seconds amount of seconds to add to this period, which must be zero if unsupported
* @param millis amount of milliseconds to add to this period, which must be zero if unsupported
* @throws IllegalArgumentException if the period being added contains a field
* not supported by this period
* @throws ArithmeticException if the addition exceeds the capacity of the period
*/
public void add(int years, int months, int weeks, int days,
int hours, int minutes, int seconds, int millis) {
setPeriod(
FieldUtils.safeAdd(getYears(), years),
FieldUtils.safeAdd(getMonths(), months),
FieldUtils.safeAdd(getWeeks(), weeks),
FieldUtils.safeAdd(getDays(), days),
FieldUtils.safeAdd(getHours(), hours),
FieldUtils.safeAdd(getMinutes(), minutes),
FieldUtils.safeAdd(getSeconds(), seconds),
FieldUtils.safeAdd(getMillis(), millis)
);
}
/**
* Adds an interval to this one by dividing the interval into
* fields and calling {@link #add(ReadablePeriod)}.
*
* @param interval the interval to add, null means add nothing
* @throws ArithmeticException if the addition exceeds the capacity of the period
*/
public void add(ReadableInterval interval) {
if (interval != null) {
add(interval.toPeriod(getPeriodType()));
}
}
/**
* Adds a duration to this one by dividing the duration into
* fields and calling {@link #add(ReadablePeriod)}.
*
* @param duration the duration to add, null means add nothing
* @throws ArithmeticException if the addition exceeds the capacity of the period
*/
public void add(ReadableDuration duration) {
if (duration != null) {
add(new Period(duration.getMillis(), getPeriodType()));
}
}
/**
* Adds a millisecond duration to this one by dividing the duration into
* fields and calling {@link #add(ReadablePeriod)}.
*
* When dividing the duration, only precise fields in the period type will be used.
* For large durations, all the remaining duration will be stored in the largest
* available precise field.
*
* @param duration the duration, in milliseconds
* @throws ArithmeticException if the addition exceeds the capacity of the period
*/
public void add(long duration) {
add(new Period(duration, getPeriodType()));
}
/**
* Adds a millisecond duration to this one by dividing the duration into
* fields and calling {@link #add(ReadablePeriod)}.
*
* When dividing the duration, only precise fields in the period type will be used.
* For large durations, all the remaining duration will be stored in the largest
* available precise field.
*
* @param duration the duration, in milliseconds
* @param chrono the chronology to use, null means ISO default
* @throws ArithmeticException if the addition exceeds the capacity of the period
*/
public void add(long duration, Chronology chrono) {
add(new Period(duration, getPeriodType(), chrono));
}
//-----------------------------------------------------------------------
/**
* Merges all the fields from the specified period into this one.
*
* Fields that are not present in the specified period are left unaltered.
*
* @param period the period to set, null ignored
* @throws IllegalArgumentException if an unsupported field's value is non-zero
*/
public void mergePeriod(ReadablePeriod period) {
super.mergePeriod(period);
}
//-----------------------------------------------------------------------
/**
* Gets the years field part of the period.
*
* @return the number of years in the period, zero if unsupported
*/
public int getYears() {
return getPeriodType().getIndexedField(this, PeriodType.YEAR_INDEX);
}
/**
* Gets the months field part of the period.
*
* @return the number of months in the period, zero if unsupported
*/
public int getMonths() {
return getPeriodType().getIndexedField(this, PeriodType.MONTH_INDEX);
}
/**
* Gets the weeks field part of the period.
*
* @return the number of weeks in the period, zero if unsupported
*/
public int getWeeks() {
return getPeriodType().getIndexedField(this, PeriodType.WEEK_INDEX);
}
/**
* Gets the days field part of the period.
*
* @return the number of days in the period, zero if unsupported
*/
public int getDays() {
return getPeriodType().getIndexedField(this, PeriodType.DAY_INDEX);
}
//-----------------------------------------------------------------------
/**
* Gets the hours field part of the period.
*
* @return the number of hours in the period, zero if unsupported
*/
public int getHours() {
return getPeriodType().getIndexedField(this, PeriodType.HOUR_INDEX);
}
/**
* Gets the minutes field part of the period.
*
* @return the number of minutes in the period, zero if unsupported
*/
public int getMinutes() {
return getPeriodType().getIndexedField(this, PeriodType.MINUTE_INDEX);
}
/**
* Gets the seconds field part of the period.
*
* @return the number of seconds in the period, zero if unsupported
*/
public int getSeconds() {
return getPeriodType().getIndexedField(this, PeriodType.SECOND_INDEX);
}
/**
* Gets the millis field part of the period.
*
* @return the number of millis in the period, zero if unsupported
*/
public int getMillis() {
return getPeriodType().getIndexedField(this, PeriodType.MILLI_INDEX);
}
//-----------------------------------------------------------------------
/**
* Sets the number of years of the period.
*
* @param years the number of years
* @throws IllegalArgumentException if field is not supported and the value is non-zero
*/
public void setYears(int years) {
super.setField(DurationFieldType.years(), years);
}
/**
* Adds the specified years to the number of years in the period.
*
* @param years the number of years
* @throws IllegalArgumentException if field is not supported and the value is non-zero
* @throws ArithmeticException if the addition exceeds the capacity of the period
*/
public void addYears(int years) {
super.addField(DurationFieldType.years(), years);
}
//-----------------------------------------------------------------------
/**
* Sets the number of months of the period.
*
* @param months the number of months
* @throws IllegalArgumentException if field is not supported and the value is non-zero
*/
public void setMonths(int months) {
super.setField(DurationFieldType.months(), months);
}
/**
* Adds the specified months to the number of months in the period.
*
* @param months the number of months
* @throws IllegalArgumentException if field is not supported and the value is non-zero
* @throws ArithmeticException if the addition exceeds the capacity of the period
*/
public void addMonths(int months) {
super.addField(DurationFieldType.months(), months);
}
//-----------------------------------------------------------------------
/**
* Sets the number of weeks of the period.
*
* @param weeks the number of weeks
* @throws IllegalArgumentException if field is not supported and the value is non-zero
*/
public void setWeeks(int weeks) {
super.setField(DurationFieldType.weeks(), weeks);
}
/**
* Adds the specified weeks to the number of weeks in the period.
*
* @param weeks the number of weeks
* @throws IllegalArgumentException if field is not supported and the value is non-zero
* @throws ArithmeticException if the addition exceeds the capacity of the period
*/
public void addWeeks(int weeks) {
super.addField(DurationFieldType.weeks(), weeks);
}
//-----------------------------------------------------------------------
/**
* Sets the number of days of the period.
*
* @param days the number of days
* @throws IllegalArgumentException if field is not supported and the value is non-zero
*/
public void setDays(int days) {
super.setField(DurationFieldType.days(), days);
}
/**
* Adds the specified days to the number of days in the period.
*
* @param days the number of days
* @throws IllegalArgumentException if field is not supported and the value is non-zero
* @throws ArithmeticException if the addition exceeds the capacity of the period
*/
public void addDays(int days) {
super.addField(DurationFieldType.days(), days);
}
//-----------------------------------------------------------------------
/**
* Sets the number of hours of the period.
*
* @param hours the number of hours
* @throws IllegalArgumentException if field is not supported and the value is non-zero
*/
public void setHours(int hours) {
super.setField(DurationFieldType.hours(), hours);
}
/**
* Adds the specified hours to the number of hours in the period.
*
* @param hours the number of hours
* @throws IllegalArgumentException if field is not supported and the value is non-zero
* @throws ArithmeticException if the addition exceeds the capacity of the period
*/
public void addHours(int hours) {
super.addField(DurationFieldType.hours(), hours);
}
//-----------------------------------------------------------------------
/**
* Sets the number of minutes of the period.
*
* @param minutes the number of minutes
* @throws IllegalArgumentException if field is not supported and the value is non-zero
*/
public void setMinutes(int minutes) {
super.setField(DurationFieldType.minutes(), minutes);
}
/**
* Adds the specified minutes to the number of minutes in the period.
*
* @param minutes the number of minutes
* @throws IllegalArgumentException if field is not supported and the value is non-zero
* @throws ArithmeticException if the addition exceeds the capacity of the period
*/
public void addMinutes(int minutes) {
super.addField(DurationFieldType.minutes(), minutes);
}
//-----------------------------------------------------------------------
/**
* Sets the number of seconds of the period.
*
* @param seconds the number of seconds
* @throws IllegalArgumentException if field is not supported and the value is non-zero
*/
public void setSeconds(int seconds) {
super.setField(DurationFieldType.seconds(), seconds);
}
/**
* Adds the specified seconds to the number of seconds in the period.
*
* @param seconds the number of seconds
* @throws IllegalArgumentException if field is not supported and the value is non-zero
* @throws ArithmeticException if the addition exceeds the capacity of the period
*/
public void addSeconds(int seconds) {
super.addField(DurationFieldType.seconds(), seconds);
}
//-----------------------------------------------------------------------
/**
* Sets the number of millis of the period.
*
* @param millis the number of millis
* @throws IllegalArgumentException if field is not supported and the value is non-zero
*/
public void setMillis(int millis) {
super.setField(DurationFieldType.millis(), millis);
}
/**
* Adds the specified millis to the number of millis in the period.
*
* @param millis the number of millis
* @throws IllegalArgumentException if field is not supported and the value is non-zero
* @throws ArithmeticException if the addition exceeds the capacity of the period
*/
public void addMillis(int millis) {
super.addField(DurationFieldType.millis(), millis);
}
// Misc
//-----------------------------------------------------------------------
/**
* Clone this object without having to cast the returned object.
*
* @return a clone of the this object.
*/
public MutablePeriod copy() {
return (MutablePeriod) clone();
}
/**
* Clone this object.
*
* @return a clone of this object.
*/
public Object clone() {
try {
return super.clone();
} catch (CloneNotSupportedException ex) {
throw new InternalError("Clone error");
}
}
}