com.jogamp.opengl.util.gl2.GLUT Maven / Gradle / Ivy
/*
* Copyright (c) 2003 Sun Microsystems, Inc. All Rights Reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* - Redistribution of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* - Redistribution in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* Neither the name of Sun Microsystems, Inc. or the names of
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* This software is provided "AS IS," without a warranty of any kind. ALL
* EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
* INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
* PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. SUN
* MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE FOR
* ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING OR
* DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL SUN OR
* ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR
* DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE
* DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY,
* ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, EVEN IF
* SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
*
* You acknowledge that this software is not designed or intended for use
* in the design, construction, operation or maintenance of any nuclear
* facility.
*
* Sun gratefully acknowledges that this software was originally authored
* and developed by Kenneth Bradley Russell and Christopher John Kline.
*/
package com.jogamp.opengl.util.gl2;
import javax.media.opengl.*;
import javax.media.opengl.glu.*;
import javax.media.opengl.glu.gl2.*;
/** Subset of the routines provided by the GLUT interface. Note the
signatures of many of the methods are necessarily different than
the corresponding C version. A GLUT object must only be used from
one particular thread at a time.
Copyright (c) Mark J. Kilgard, 1994, 1997.
(c) Copyright 1993, Silicon Graphics, Inc.
ALL RIGHTS RESERVED
Permission to use, copy, modify, and distribute this software
for any purpose and without fee is hereby granted, provided
that the above copyright notice appear in all copies and that
both the copyright notice and this permission notice appear in
supporting documentation, and that the name of Silicon
Graphics, Inc. not be used in advertising or publicity
pertaining to distribution of the software without specific,
written prior permission.
THE MATERIAL EMBODIED ON THIS SOFTWARE IS PROVIDED TO YOU
"AS-IS" AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR
OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO
EVENT SHALL SILICON GRAPHICS, INC. BE LIABLE TO YOU OR ANYONE
ELSE FOR ANY DIRECT, SPECIAL, INCIDENTAL, INDIRECT OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER,
INCLUDING WITHOUT LIMITATION, LOSS OF PROFIT, LOSS OF USE,
SAVINGS OR REVENUE, OR THE CLAIMS OF THIRD PARTIES, WHETHER OR
NOT SILICON GRAPHICS, INC. HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH LOSS, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
ARISING OUT OF OR IN CONNECTION WITH THE POSSESSION, USE OR
PERFORMANCE OF THIS SOFTWARE.
US Government Users Restricted Rights
Use, duplication, or disclosure by the Government is subject to
restrictions set forth in FAR 52.227.19(c)(2) or subparagraph
(c)(1)(ii) of the Rights in Technical Data and Computer
Software clause at DFARS 252.227-7013 and/or in similar or
successor clauses in the FAR or the DOD or NASA FAR
Supplement. Unpublished-- rights reserved under the copyright
laws of the United States. Contractor/manufacturer is Silicon
Graphics, Inc., 2011 N. Shoreline Blvd., Mountain View, CA
94039-7311.
OpenGL(TM) is a trademark of Silicon Graphics, Inc.
*/
public class GLUT {
public static final int STROKE_ROMAN = 0;
public static final int STROKE_MONO_ROMAN = 1;
public static final int BITMAP_9_BY_15 = 2;
public static final int BITMAP_8_BY_13 = 3;
public static final int BITMAP_TIMES_ROMAN_10 = 4;
public static final int BITMAP_TIMES_ROMAN_24 = 5;
public static final int BITMAP_HELVETICA_10 = 6;
public static final int BITMAP_HELVETICA_12 = 7;
public static final int BITMAP_HELVETICA_18 = 8;
private GLUgl2 glu = new GLUgl2();
//----------------------------------------------------------------------
// Shapes
//
public void glutWireSphere(double radius, int slices, int stacks) {
quadObjInit(glu);
glu.gluQuadricDrawStyle(quadObj, GLU.GLU_LINE);
glu.gluQuadricNormals(quadObj, GLU.GLU_SMOOTH);
/* If we ever changed/used the texture or orientation state
of quadObj, we'd need to change it to the defaults here
with gluQuadricTexture and/or gluQuadricOrientation. */
glu.gluSphere(quadObj, radius, slices, stacks);
}
public void glutSolidSphere(double radius, int slices, int stacks) {
quadObjInit(glu);
glu.gluQuadricDrawStyle(quadObj, GLU.GLU_FILL);
glu.gluQuadricNormals(quadObj, GLU.GLU_SMOOTH);
/* If we ever changed/used the texture or orientation state
of quadObj, we'd need to change it to the defaults here
with gluQuadricTexture and/or gluQuadricOrientation. */
glu.gluSphere(quadObj, radius, slices, stacks);
}
public void glutWireCone(double base, double height,
int slices, int stacks) {
quadObjInit(glu);
glu.gluQuadricDrawStyle(quadObj, GLU.GLU_LINE);
glu.gluQuadricNormals(quadObj, GLU.GLU_SMOOTH);
/* If we ever changed/used the texture or orientation state
of quadObj, we'd need to change it to the defaults here
with gluQuadricTexture and/or gluQuadricOrientation. */
glu.gluCylinder(quadObj, base, 0.0, height, slices, stacks);
}
public void glutSolidCone(double base, double height,
int slices, int stacks) {
quadObjInit(glu);
glu.gluQuadricDrawStyle(quadObj, GLU.GLU_FILL);
glu.gluQuadricNormals(quadObj, GLU.GLU_SMOOTH);
/* If we ever changed/used the texture or orientation state
of quadObj, we'd need to change it to the defaults here
with gluQuadricTexture and/or gluQuadricOrientation. */
glu.gluCylinder(quadObj, base, 0.0, height, slices, stacks);
}
public void glutWireCylinder(double radius, double height, int slices, int stacks) {
quadObjInit(glu);
glu.gluQuadricDrawStyle(quadObj, GLU.GLU_LINE);
glu.gluQuadricNormals(quadObj, GLU.GLU_SMOOTH);
/* If we ever changed/used the texture or orientation state
of quadObj, we'd need to change it to the defaults here
with gluQuadricTexture and/or gluQuadricOrientation. */
glu.gluCylinder(quadObj, radius, radius, height, slices, stacks);
}
public void glutSolidCylinder(double radius, double height, int slices, int stacks) {
GL2 gl = GLUgl2.getCurrentGL2();
// Prepare table of points for drawing end caps
double [] x = new double[slices];
double [] y = new double[slices];
double angleDelta = Math.PI * 2 / slices;
double angle = 0;
for (int i = 0 ; i < slices ; i ++) {
angle = i * angleDelta;
x[i] = Math.cos(angle) * radius;
y[i] = Math.sin(angle) * radius;
}
// Draw bottom cap
gl.glBegin(GL2.GL_TRIANGLE_FAN);
gl.glNormal3d(0,0,-1);
gl.glVertex3d(0,0,0);
for (int i = 0 ; i < slices ; i ++) {
gl.glVertex3d(x[i], y[i], 0);
}
gl.glVertex3d(x[0], y[0], 0);
gl.glEnd();
// Draw top cap
gl.glBegin(GL2.GL_TRIANGLE_FAN);
gl.glNormal3d(0,0,1);
gl.glVertex3d(0,0,height);
for (int i = 0 ; i < slices ; i ++) {
gl.glVertex3d(x[i], y[i], height);
}
gl.glVertex3d(x[0], y[0], height);
gl.glEnd();
// Draw walls
quadObjInit(glu);
glu.gluQuadricDrawStyle(quadObj, GLU.GLU_FILL);
glu.gluQuadricNormals(quadObj, GLU.GLU_SMOOTH);
/* If we ever changed/used the texture or orientation state
of quadObj, we'd need to change it to the defaults here
with gluQuadricTexture and/or gluQuadricOrientation. */
glu.gluCylinder(quadObj, radius, radius, height, slices, stacks);
}
public void glutWireCube(float size) {
drawBox(GLUgl2.getCurrentGL2(), size, GL2.GL_LINE_LOOP);
}
public void glutSolidCube(float size) {
drawBox(GLUgl2.getCurrentGL2(), size, GL2.GL_QUADS);
}
public void glutWireTorus(double innerRadius, double outerRadius,
int nsides, int rings) {
GL2 gl = GLUgl2.getCurrentGL2();
gl.glPushAttrib(GL2.GL_POLYGON_BIT);
gl.glPolygonMode(GL2.GL_FRONT_AND_BACK, GL2.GL_LINE);
doughnut(gl, innerRadius, outerRadius, nsides, rings);
gl.glPopAttrib();
}
public void glutSolidTorus(double innerRadius, double outerRadius,
int nsides, int rings) {
doughnut(GLUgl2.getCurrentGL2(), innerRadius, outerRadius, nsides, rings);
}
public void glutWireDodecahedron() {
dodecahedron(GLUgl2.getCurrentGL2(), GL2.GL_LINE_LOOP);
}
public void glutSolidDodecahedron() {
dodecahedron(GLUgl2.getCurrentGL2(), GL2.GL_TRIANGLE_FAN);
}
public void glutWireOctahedron() {
octahedron(GLUgl2.getCurrentGL2(), GL2.GL_LINE_LOOP);
}
public void glutSolidOctahedron() {
octahedron(GLUgl2.getCurrentGL2(), GL2.GL_TRIANGLES);
}
public void glutWireIcosahedron() {
icosahedron(GLUgl2.getCurrentGL2(), GL2.GL_LINE_LOOP);
}
public void glutSolidIcosahedron() {
icosahedron(GLUgl2.getCurrentGL2(), GL2.GL_TRIANGLES);
}
public void glutWireTetrahedron() {
tetrahedron(GLUgl2.getCurrentGL2(), GL2.GL_LINE_LOOP);
}
public void glutSolidTetrahedron() {
tetrahedron(GLUgl2.getCurrentGL2(), GL2.GL_TRIANGLES);
}
/**
* Renders the teapot as a solid shape of the specified size. The teapot is
* created in a way that replicates the C GLUT implementation.
*
* @param scale
* the factor by which to scale the teapot
*/
public void glutSolidTeapot(double scale) {
glutSolidTeapot(scale, true);
}
/**
* Renders the teapot as a solid shape of the specified size. The teapot can
* either be created in a way that is backward-compatible with the standard
* C glut library (i.e. broken), or in a more pleasing way (i.e. with
* surfaces whose front-faces point outwards and standing on the z=0 plane,
* instead of the y=-1 plane). Both surface normals and texture coordinates
* for the teapot are generated. The teapot is generated with OpenGL
* evaluators.
*
* @param scale
* the factor by which to scale the teapot
* @param cStyle
* whether to create the teapot in exactly the same way as in the C
* implementation of GLUT
*/
public void glutSolidTeapot(double scale, boolean cStyle) {
teapot(GLUgl2.getCurrentGL2(), 14, scale, GL2.GL_FILL, cStyle);
}
/**
* Renders the teapot as a wireframe shape of the specified size. The teapot
* is created in a way that replicates the C GLUT implementation.
*
* @param scale
* the factor by which to scale the teapot
*/
public void glutWireTeapot(double scale) {
glutWireTeapot(scale, true);
}
/**
* Renders the teapot as a wireframe shape of the specified size. The teapot
* can either be created in a way that is backward-compatible with the
* standard C glut library (i.e. broken), or in a more pleasing way (i.e.
* with surfaces whose front-faces point outwards and standing on the z=0
* plane, instead of the y=-1 plane). Both surface normals and texture
* coordinates for the teapot are generated. The teapot is generated with
* OpenGL evaluators.
*
* @param scale
* the factor by which to scale the teapot
* @param cStyle
* whether to create the teapot in exactly the same way as in the C
* implementation of GLUT
*/
public void glutWireTeapot(double scale, boolean cStyle) {
teapot(GLUgl2.getCurrentGL2(), 10, scale, GL2.GL_LINE, cStyle);
}
//----------------------------------------------------------------------
// Fonts
//
public void glutBitmapCharacter(int font, char character) {
GL2 gl = GLUgl2.getCurrentGL2();
int[] swapbytes = new int[1];
int[] lsbfirst = new int[1];
int[] rowlength = new int[1];
int[] skiprows = new int[1];
int[] skippixels = new int[1];
int[] alignment = new int[1];
beginBitmap(gl,
swapbytes,
lsbfirst,
rowlength,
skiprows,
skippixels,
alignment);
bitmapCharacterImpl(gl, font, character);
endBitmap(gl,
swapbytes,
lsbfirst,
rowlength,
skiprows,
skippixels,
alignment);
}
public void glutBitmapString (int font, String string) {
GL2 gl = GLUgl2.getCurrentGL2();
int[] swapbytes = new int[1];
int[] lsbfirst = new int[1];
int[] rowlength = new int[1];
int[] skiprows = new int[1];
int[] skippixels = new int[1];
int[] alignment = new int[1];
beginBitmap(gl,
swapbytes,
lsbfirst,
rowlength,
skiprows,
skippixels,
alignment);
int len = string.length();
for (int i = 0; i < len; i++) {
bitmapCharacterImpl(gl, font, string.charAt(i));
}
endBitmap(gl,
swapbytes,
lsbfirst,
rowlength,
skiprows,
skippixels,
alignment);
}
public int glutBitmapWidth (int font, char character) {
BitmapFontRec fontinfo = getBitmapFont(font);
int c = character & 0xFFFF;
if (c < fontinfo.first || c >= fontinfo.first + fontinfo.num_chars)
return 0;
BitmapCharRec ch = fontinfo.ch[c - fontinfo.first];
if (ch != null)
return (int) ch.advance;
else
return 0;
}
public void glutStrokeCharacter(int font, char character) {
GL2 gl = GLUgl2.getCurrentGL2();
StrokeFontRec fontinfo = getStrokeFont(font);
int c = character & 0xFFFF;
if (c < 0 || c >= fontinfo.num_chars)
return;
StrokeCharRec ch = fontinfo.ch[c];
if (ch != null) {
for (int i = 0; i < ch.num_strokes; i++) {
StrokeRec stroke = ch.stroke[i];
gl.glBegin(GL2.GL_LINE_STRIP);
for (int j = 0; j < stroke.num_coords; j++) {
CoordRec coord = stroke.coord[j];
gl.glVertex2f(coord.x, coord.y);
}
gl.glEnd();
}
gl.glTranslatef(ch.right, 0.0f, 0.0f);
}
}
public void glutStrokeString(int font, String string) {
GL2 gl = GLUgl2.getCurrentGL2();
StrokeFontRec fontinfo = getStrokeFont(font);
int len = string.length();
for (int pos = 0; pos < len; pos++) {
int c = string.charAt(pos) & 0xFFFF;
if (c < 0 || c >= fontinfo.num_chars)
continue;
StrokeCharRec ch = fontinfo.ch[c];
if (ch != null) {
for (int i = 0; i < ch.num_strokes; i++) {
StrokeRec stroke = ch.stroke[i];
gl.glBegin(GL2.GL_LINE_STRIP);
for (int j = 0; j < stroke.num_coords; j++) {
CoordRec coord = stroke.coord[j];
gl.glVertex2f(coord.x, coord.y);
}
gl.glEnd();
}
gl.glTranslatef(ch.right, 0.0f, 0.0f);
}
}
}
public int glutStrokeWidth (int font, char character) {
return (int) glutStrokeWidthf(font, character);
}
public float glutStrokeWidthf (int font, char character) {
StrokeFontRec fontinfo = getStrokeFont(font);
int c = character & 0xFFFF;
if (c < 0 || c >= fontinfo.num_chars)
return 0;
StrokeCharRec ch = fontinfo.ch[c];
if (ch != null)
return ch.right;
else
return 0;
}
public int glutBitmapLength (int font, String string) {
BitmapFontRec fontinfo = getBitmapFont(font);
int length = 0;
int len = string.length();
for (int pos = 0; pos < len; pos++) {
int c = string.charAt(pos) & 0xFFFF;
if (c >= fontinfo.first && c < fontinfo.first + fontinfo.num_chars) {
BitmapCharRec ch = fontinfo.ch[c - fontinfo.first];
if (ch != null)
length += ch.advance;
}
}
return length;
}
public int glutStrokeLength (int font, String string) {
return (int) glutStrokeLengthf(font, string);
}
public float glutStrokeLengthf (int font, String string) {
StrokeFontRec fontinfo = getStrokeFont(font);
float length = 0;
int len = string.length();
for (int i = 0; i < len; i++) {
char c = string.charAt(i);
if (c >= 0 && c < fontinfo.num_chars) {
StrokeCharRec ch = fontinfo.ch[c];
if (ch != null)
length += ch.right;
}
}
return length;
}
/**
This function draws a wireframe dodecahedron whose
facets are rhombic and
whose vertices are at unit radius.
No facet lies normal to any coordinate axes.
The polyhedron is centered at the origin.
*/
public void glutWireRhombicDodecahedron() {
GL2 gl = GLUgl2.getCurrentGL2();
for( int i = 0; i < 12; i++ ) {
gl.glBegin( GL2.GL_LINE_LOOP );
gl.glNormal3dv( rdod_n[ i ],0 );
gl.glVertex3dv( rdod_r[ rdod_v[ i ][ 0 ] ],0 );
gl.glVertex3dv( rdod_r[ rdod_v[ i ][ 1 ] ],0 );
gl.glVertex3dv( rdod_r[ rdod_v[ i ][ 2 ] ],0 );
gl.glVertex3dv( rdod_r[ rdod_v[ i ][ 3 ] ],0 );
gl.glEnd( );
}
}
/**
This function draws a solid-shaded dodecahedron
whose facets are rhombic and
whose vertices are at unit radius.
No facet lies normal to any coordinate axes.
The polyhedron is centered at the origin.
*/
public void glutSolidRhombicDodecahedron() {
GL2 gl = GLUgl2.getCurrentGL2();
gl.glBegin( GL2.GL_QUADS );
for( int i = 0; i < 12; i++ ) {
gl.glNormal3dv( rdod_n[ i ],0 );
gl.glVertex3dv( rdod_r[ rdod_v[ i ][ 0 ] ],0 );
gl.glVertex3dv( rdod_r[ rdod_v[ i ][ 1 ] ],0 );
gl.glVertex3dv( rdod_r[ rdod_v[ i ][ 2 ] ],0 );
gl.glVertex3dv( rdod_r[ rdod_v[ i ][ 3 ] ],0 );
}
gl.glEnd( );
}
//----------------------------------------------------------------------
// Internals only below this point
//
//----------------------------------------------------------------------
// Shape implementation
//
private GLUquadric quadObj;
private void quadObjInit(GLUgl2 glu) {
if (quadObj == null) {
quadObj = glu.gluNewQuadric();
}
if (quadObj == null) {
throw new GLException("Out of memory");
}
}
private static void doughnut(GL2 gl, double r, double R, int nsides, int rings) {
int i, j;
float theta, phi, theta1;
float cosTheta, sinTheta;
float cosTheta1, sinTheta1;
float ringDelta, sideDelta;
ringDelta = (float) (2.0 * Math.PI / rings);
sideDelta = (float) (2.0 * Math.PI / nsides);
theta = 0.0f;
cosTheta = 1.0f;
sinTheta = 0.0f;
for (i = rings - 1; i >= 0; i--) {
theta1 = theta + ringDelta;
cosTheta1 = (float) Math.cos(theta1);
sinTheta1 = (float) Math.sin(theta1);
gl.glBegin(GL2.GL_QUAD_STRIP);
phi = 0.0f;
for (j = nsides; j >= 0; j--) {
float cosPhi, sinPhi, dist;
phi += sideDelta;
cosPhi = (float) Math.cos(phi);
sinPhi = (float) Math.sin(phi);
dist = (float) (R + r * cosPhi);
gl.glNormal3f(cosTheta1 * cosPhi, -sinTheta1 * cosPhi, sinPhi);
gl.glVertex3f(cosTheta1 * dist, -sinTheta1 * dist, (float) r * sinPhi);
gl.glNormal3f(cosTheta * cosPhi, -sinTheta * cosPhi, sinPhi);
gl.glVertex3f(cosTheta * dist, -sinTheta * dist, (float) r * sinPhi);
}
gl.glEnd();
theta = theta1;
cosTheta = cosTheta1;
sinTheta = sinTheta1;
}
}
private static float[][] boxVertices;
private static final float[][] boxNormals = {
{-1.0f, 0.0f, 0.0f},
{0.0f, 1.0f, 0.0f},
{1.0f, 0.0f, 0.0f},
{0.0f, -1.0f, 0.0f},
{0.0f, 0.0f, 1.0f},
{0.0f, 0.0f, -1.0f}
};
private static final int[][] boxFaces = {
{0, 1, 2, 3},
{3, 2, 6, 7},
{7, 6, 5, 4},
{4, 5, 1, 0},
{5, 6, 2, 1},
{7, 4, 0, 3}
};
private void drawBox(GL2 gl, float size, int type) {
if (boxVertices == null) {
float[][] v = new float[8][];
for (int i = 0; i < 8; i++) {
v[i] = new float[3];
}
v[0][0] = v[1][0] = v[2][0] = v[3][0] = -0.5f;
v[4][0] = v[5][0] = v[6][0] = v[7][0] = 0.5f;
v[0][1] = v[1][1] = v[4][1] = v[5][1] = -0.5f;
v[2][1] = v[3][1] = v[6][1] = v[7][1] = 0.5f;
v[0][2] = v[3][2] = v[4][2] = v[7][2] = -0.5f;
v[1][2] = v[2][2] = v[5][2] = v[6][2] = 0.5f;
boxVertices = v;
}
float[][] v = boxVertices;
float[][] n = boxNormals;
int[][] faces = boxFaces;
for (int i = 5; i >= 0; i--) {
gl.glBegin(type);
gl.glNormal3fv(n[i], 0);
float[] vt = v[faces[i][0]];
gl.glVertex3f(vt[0] * size, vt[1] * size, vt[2] * size);
vt = v[faces[i][1]];
gl.glVertex3f(vt[0] * size, vt[1] * size, vt[2] * size);
vt = v[faces[i][2]];
gl.glVertex3f(vt[0] * size, vt[1] * size, vt[2] * size);
vt = v[faces[i][3]];
gl.glVertex3f(vt[0] * size, vt[1] * size, vt[2] * size);
gl.glEnd();
}
}
private float[][] dodec;
private void initDodecahedron() {
dodec = new float[20][];
for (int i = 0; i < dodec.length; i++) {
dodec[i] = new float[3];
}
float alpha, beta;
alpha = (float) Math.sqrt(2.0f / (3.0f + Math.sqrt(5.0)));
beta = 1.0f + (float) Math.sqrt(6.0 / (3.0 + Math.sqrt(5.0)) -
2.0 + 2.0 * Math.sqrt(2.0 / (3.0 + Math.sqrt(5.0))));
dodec[0][0] = -alpha; dodec[0][1] = 0; dodec[0][2] = beta;
dodec[1][0] = alpha; dodec[1][1] = 0; dodec[1][2] = beta;
dodec[2][0] = -1; dodec[2][1] = -1; dodec[2][2] = -1;
dodec[3][0] = -1; dodec[3][1] = -1; dodec[3][2] = 1;
dodec[4][0] = -1; dodec[4][1] = 1; dodec[4][2] = -1;
dodec[5][0] = -1; dodec[5][1] = 1; dodec[5][2] = 1;
dodec[6][0] = 1; dodec[6][1] = -1; dodec[6][2] = -1;
dodec[7][0] = 1; dodec[7][1] = -1; dodec[7][2] = 1;
dodec[8][0] = 1; dodec[8][1] = 1; dodec[8][2] = -1;
dodec[9][0] = 1; dodec[9][1] = 1; dodec[9][2] = 1;
dodec[10][0] = beta; dodec[10][1] = alpha; dodec[10][2] = 0;
dodec[11][0] = beta; dodec[11][1] = -alpha; dodec[11][2] = 0;
dodec[12][0] = -beta; dodec[12][1] = alpha; dodec[12][2] = 0;
dodec[13][0] = -beta; dodec[13][1] = -alpha; dodec[13][2] = 0;
dodec[14][0] = -alpha; dodec[14][1] = 0; dodec[14][2] = -beta;
dodec[15][0] = alpha; dodec[15][1] = 0; dodec[15][2] = -beta;
dodec[16][0] = 0; dodec[16][1] = beta; dodec[16][2] = alpha;
dodec[17][0] = 0; dodec[17][1] = beta; dodec[17][2] = -alpha;
dodec[18][0] = 0; dodec[18][1] = -beta; dodec[18][2] = alpha;
dodec[19][0] = 0; dodec[19][1] = -beta; dodec[19][2] = -alpha;
}
private static void diff3(float[] a, float[] b, float[] c) {
c[0] = a[0] - b[0];
c[1] = a[1] - b[1];
c[2] = a[2] - b[2];
}
private static void crossprod(float[] v1, float[] v2, float[] prod) {
float[] p = new float[3]; /* in case prod == v1 or v2 */
p[0] = v1[1] * v2[2] - v2[1] * v1[2];
p[1] = v1[2] * v2[0] - v2[2] * v1[0];
p[2] = v1[0] * v2[1] - v2[0] * v1[1];
prod[0] = p[0];
prod[1] = p[1];
prod[2] = p[2];
}
private static void normalize(float[] v) {
float d;
d = (float) Math.sqrt(v[0] * v[0] + v[1] * v[1] + v[2] * v[2]);
if (d == 0.0) {
v[0] = d = 1.0f;
}
d = 1 / d;
v[0] *= d;
v[1] *= d;
v[2] *= d;
}
private void pentagon(GL2 gl, int a, int b, int c, int d, int e, int shadeType) {
float[] n0 = new float[3];
float[] d1 = new float[3];
float[] d2 = new float[3];
diff3(dodec[a], dodec[b], d1);
diff3(dodec[b], dodec[c], d2);
crossprod(d1, d2, n0);
normalize(n0);
gl.glBegin(shadeType);
gl.glNormal3fv(n0, 0);
gl.glVertex3fv(dodec[a], 0);
gl.glVertex3fv(dodec[b], 0);
gl.glVertex3fv(dodec[c], 0);
gl.glVertex3fv(dodec[d], 0);
gl.glVertex3fv(dodec[e], 0);
gl.glEnd();
}
private void dodecahedron(GL2 gl, int type) {
if (dodec == null) {
initDodecahedron();
}
pentagon(gl, 0, 1, 9, 16, 5, type);
pentagon(gl, 1, 0, 3, 18, 7, type);
pentagon(gl, 1, 7, 11, 10, 9, type);
pentagon(gl, 11, 7, 18, 19, 6, type);
pentagon(gl, 8, 17, 16, 9, 10, type);
pentagon(gl, 2, 14, 15, 6, 19, type);
pentagon(gl, 2, 13, 12, 4, 14, type);
pentagon(gl, 2, 19, 18, 3, 13, type);
pentagon(gl, 3, 0, 5, 12, 13, type);
pentagon(gl, 6, 15, 8, 10, 11, type);
pentagon(gl, 4, 17, 8, 15, 14, type);
pentagon(gl, 4, 12, 5, 16, 17, type);
}
private static void recorditem(GL2 gl, float[] n1, float[] n2, float[] n3, int shadeType) {
float[] q0 = new float[3];
float[] q1 = new float[3];
diff3(n1, n2, q0);
diff3(n2, n3, q1);
crossprod(q0, q1, q1);
normalize(q1);
gl.glBegin(shadeType);
gl.glNormal3fv(q1, 0);
gl.glVertex3fv(n1, 0);
gl.glVertex3fv(n2, 0);
gl.glVertex3fv(n3, 0);
gl.glEnd();
}
private static void subdivide(GL2 gl, float[] v0, float[] v1, float[] v2, int shadeType) {
int depth;
float[] w0 = new float[3];
float[] w1 = new float[3];
float[] w2 = new float[3];
float l;
int i, j, k, n;
depth = 1;
for (i = 0; i < depth; i++) {
for (j = 0; i + j < depth; j++) {
k = depth - i - j;
for (n = 0; n < 3; n++) {
w0[n] = (i * v0[n] + j * v1[n] + k * v2[n]) / depth;
w1[n] = ((i + 1) * v0[n] + j * v1[n] + (k - 1) * v2[n])
/ depth;
w2[n] = (i * v0[n] + (j + 1) * v1[n] + (k - 1) * v2[n])
/ depth;
}
l = (float) Math.sqrt(w0[0] * w0[0] + w0[1] * w0[1] + w0[2] * w0[2]);
w0[0] /= l;
w0[1] /= l;
w0[2] /= l;
l = (float) Math.sqrt(w1[0] * w1[0] + w1[1] * w1[1] + w1[2] * w1[2]);
w1[0] /= l;
w1[1] /= l;
w1[2] /= l;
l = (float) Math.sqrt(w2[0] * w2[0] + w2[1] * w2[1] + w2[2] * w2[2]);
w2[0] /= l;
w2[1] /= l;
w2[2] /= l;
recorditem(gl, w1, w0, w2, shadeType);
}
}
}
private static void drawtriangle(GL2 gl, int i, float[][] data, int[][] ndx, int shadeType) {
float[] x0 = data[ndx[i][0]];
float[] x1 = data[ndx[i][1]];
float[] x2 = data[ndx[i][2]];
subdivide(gl, x0, x1, x2, shadeType);
}
/* octahedron data: The octahedron produced is centered at the
origin and has radius 1.0 */
private static final float[][] odata =
{
{1.0f, 0.0f, 0.0f},
{-1.0f, 0.0f, 0.0f},
{0.0f, 1.0f, 0.0f},
{0.0f, -1.0f, 0.0f},
{0.0f, 0.0f, 1.0f},
{0.0f, 0.0f, -1.0f}
};
private static final int[][] ondex =
{
{0, 4, 2},
{1, 2, 4},
{0, 3, 4},
{1, 4, 3},
{0, 2, 5},
{1, 5, 2},
{0, 5, 3},
{1, 3, 5}
};
private static void octahedron(GL2 gl, int shadeType) {
int i;
for (i = 7; i >= 0; i--) {
drawtriangle(gl, i, odata, ondex, shadeType);
}
}
/* icosahedron data: These numbers are rigged to make an
icosahedron of radius 1.0 */
private static final float X = .525731112119133606f;
private static final float Z = .850650808352039932f;
private static final float[][] idata =
{
{-X, 0, Z},
{X, 0, Z},
{-X, 0, -Z},
{X, 0, -Z},
{0, Z, X},
{0, Z, -X},
{0, -Z, X},
{0, -Z, -X},
{Z, X, 0},
{-Z, X, 0},
{Z, -X, 0},
{-Z, -X, 0}
};
private static final int[][] index =
{
{0, 4, 1},
{0, 9, 4},
{9, 5, 4},
{4, 5, 8},
{4, 8, 1},
{8, 10, 1},
{8, 3, 10},
{5, 3, 8},
{5, 2, 3},
{2, 7, 3},
{7, 10, 3},
{7, 6, 10},
{7, 11, 6},
{11, 0, 6},
{0, 1, 6},
{6, 1, 10},
{9, 0, 11},
{9, 11, 2},
{9, 2, 5},
{7, 2, 11},
};
private static void icosahedron(GL2 gl, int shadeType) {
int i;
for (i = 19; i >= 0; i--) {
drawtriangle(gl, i, idata, index, shadeType);
}
}
/* rhombic dodecahedron data: */
private static final double rdod_r[][] =
{
{ 0.0, 0.0, 1.0 },
{ 0.707106781187, 0.000000000000, 0.5 },
{ 0.000000000000, 0.707106781187, 0.5 },
{ -0.707106781187, 0.000000000000, 0.5 },
{ 0.000000000000, -0.707106781187, 0.5 },
{ 0.707106781187, 0.707106781187, 0.0 },
{ -0.707106781187, 0.707106781187, 0.0 },
{ -0.707106781187, -0.707106781187, 0.0 },
{ 0.707106781187, -0.707106781187, 0.0 },
{ 0.707106781187, 0.000000000000, -0.5 },
{ 0.000000000000, 0.707106781187, -0.5 },
{ -0.707106781187, 0.000000000000, -0.5 },
{ 0.000000000000, -0.707106781187, -0.5 },
{ 0.0, 0.0, -1.0 }
};
private static final int rdod_v[][] =
{
{ 0, 1, 5, 2 },
{ 0, 2, 6, 3 },
{ 0, 3, 7, 4 },
{ 0, 4, 8, 1 },
{ 5, 10, 6, 2 },
{ 6, 11, 7, 3 },
{ 7, 12, 8, 4 },
{ 8, 9, 5, 1 },
{ 5, 9, 13, 10 },
{ 6, 10, 13, 11 },
{ 7, 11, 13, 12 },
{ 8, 12, 13, 9 }
};
private static final double rdod_n[][] =
{
{ 0.353553390594, 0.353553390594, 0.5 },
{ -0.353553390594, 0.353553390594, 0.5 },
{ -0.353553390594, -0.353553390594, 0.5 },
{ 0.353553390594, -0.353553390594, 0.5 },
{ 0.000000000000, 1.000000000000, 0.0 },
{ -1.000000000000, 0.000000000000, 0.0 },
{ 0.000000000000, -1.000000000000, 0.0 },
{ 1.000000000000, 0.000000000000, 0.0 },
{ 0.353553390594, 0.353553390594, -0.5 },
{ -0.353553390594, 0.353553390594, -0.5 },
{ -0.353553390594, -0.353553390594, -0.5 },
{ 0.353553390594, -0.353553390594, -0.5 }
};
/* tetrahedron data: */
private static final float T = 1.73205080756887729f;
private static final float[][] tdata =
{
{T, T, T},
{T, -T, -T},
{-T, T, -T},
{-T, -T, T}
};
private static final int[][] tndex =
{
{0, 1, 3},
{2, 1, 0},
{3, 2, 0},
{1, 2, 3}
};
private static final void tetrahedron(GL2 gl, int shadeType) {
for (int i = 3; i >= 0; i--)
drawtriangle(gl, i, tdata, tndex, shadeType);
}
// Teapot implementation (a modified port of glut_teapot.c)
//
// Rim, body, lid, and bottom data must be reflected in x and
// y; handle and spout data across the y axis only.
private static final int[][] teapotPatchData = {
/* rim */
{102, 103, 104, 105, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15},
/* body */
{12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27},
{24, 25, 26, 27, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40},
/* lid */
{96, 96, 96, 96, 97, 98, 99, 100, 101, 101, 101, 101, 0, 1, 2, 3,},
{0, 1, 2, 3, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117},
/* bottom */
{118, 118, 118, 118, 124, 122, 119, 121, 123, 126, 125, 120, 40, 39, 38, 37},
/* handle */
{41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56},
{53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 28, 65, 66, 67},
/* spout */
{68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83},
{80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95}
};
private static final float[][] teapotCPData = {
{0.2f, 0f, 2.7f},
{0.2f, -0.112f, 2.7f},
{0.112f, -0.2f, 2.7f},
{0f, -0.2f, 2.7f},
{1.3375f, 0f, 2.53125f},
{1.3375f, -0.749f, 2.53125f},
{0.749f, -1.3375f, 2.53125f},
{0f, -1.3375f, 2.53125f},
{1.4375f, 0f, 2.53125f},
{1.4375f, -0.805f, 2.53125f},
{0.805f, -1.4375f, 2.53125f},
{0f, -1.4375f, 2.53125f},
{1.5f, 0f, 2.4f},
{1.5f, -0.84f, 2.4f},
{0.84f, -1.5f, 2.4f},
{0f, -1.5f, 2.4f},
{1.75f, 0f, 1.875f},
{1.75f, -0.98f, 1.875f},
{0.98f, -1.75f, 1.875f},
{0f, -1.75f, 1.875f},
{2f, 0f, 1.35f},
{2f, -1.12f, 1.35f},
{1.12f, -2f, 1.35f},
{0f, -2f, 1.35f},
{2f, 0f, 0.9f},
{2f, -1.12f, 0.9f},
{1.12f, -2f, 0.9f},
{0f, -2f, 0.9f},
{-2f, 0f, 0.9f},
{2f, 0f, 0.45f},
{2f, -1.12f, 0.45f},
{1.12f, -2f, 0.45f},
{0f, -2f, 0.45f},
{1.5f, 0f, 0.225f},
{1.5f, -0.84f, 0.225f},
{0.84f, -1.5f, 0.225f},
{0f, -1.5f, 0.225f},
{1.5f, 0f, 0.15f},
{1.5f, -0.84f, 0.15f},
{0.84f, -1.5f, 0.15f},
{0f, -1.5f, 0.15f},
{-1.6f, 0f, 2.025f},
{-1.6f, -0.3f, 2.025f},
{-1.5f, -0.3f, 2.25f},
{-1.5f, 0f, 2.25f},
{-2.3f, 0f, 2.025f},
{-2.3f, -0.3f, 2.025f},
{-2.5f, -0.3f, 2.25f},
{-2.5f, 0f, 2.25f},
{-2.7f, 0f, 2.025f},
{-2.7f, -0.3f, 2.025f},
{-3f, -0.3f, 2.25f},
{-3f, 0f, 2.25f},
{-2.7f, 0f, 1.8f},
{-2.7f, -0.3f, 1.8f},
{-3f, -0.3f, 1.8f},
{-3f, 0f, 1.8f},
{-2.7f, 0f, 1.575f},
{-2.7f, -0.3f, 1.575f},
{-3f, -0.3f, 1.35f},
{-3f, 0f, 1.35f},
{-2.5f, 0f, 1.125f},
{-2.5f, -0.3f, 1.125f},
{-2.65f, -0.3f, 0.9375f},
{-2.65f, 0f, 0.9375f},
{-2f, -0.3f, 0.9f},
{-1.9f, -0.3f, 0.6f},
{-1.9f, 0f, 0.6f},
{1.7f, 0f, 1.425f},
{1.7f, -0.66f, 1.425f},
{1.7f, -0.66f, 0.6f},
{1.7f, 0f, 0.6f},
{2.6f, 0f, 1.425f},
{2.6f, -0.66f, 1.425f},
{3.1f, -0.66f, 0.825f},
{3.1f, 0f, 0.825f},
{2.3f, 0f, 2.1f},
{2.3f, -0.25f, 2.1f},
{2.4f, -0.25f, 2.025f},
{2.4f, 0f, 2.025f},
{2.7f, 0f, 2.4f},
{2.7f, -0.25f, 2.4f},
{3.3f, -0.25f, 2.4f},
{3.3f, 0f, 2.4f},
{2.8f, 0f, 2.475f},
{2.8f, -0.25f, 2.475f},
{3.525f, -0.25f, 2.49375f},
{3.525f, 0f, 2.49375f},
{2.9f, 0f, 2.475f},
{2.9f, -0.15f, 2.475f},
{3.45f, -0.15f, 2.5125f},
{3.45f, 0f, 2.5125f},
{2.8f, 0f, 2.4f},
{2.8f, -0.15f, 2.4f},
{3.2f, -0.15f, 2.4f},
{3.2f, 0f, 2.4f},
{0f, 0f, 3.15f},
{0.8f, 0f, 3.15f},
{0.8f, -0.45f, 3.15f},
{0.45f, -0.8f, 3.15f},
{0f, -0.8f, 3.15f},
{0f, 0f, 2.85f},
{1.4f, 0f, 2.4f},
{1.4f, -0.784f, 2.4f},
{0.784f, -1.4f, 2.4f},
{0f, -1.4f, 2.4f},
{0.4f, 0f, 2.55f},
{0.4f, -0.224f, 2.55f},
{0.224f, -0.4f, 2.55f},
{0f, -0.4f, 2.55f},
{1.3f, 0f, 2.55f},
{1.3f, -0.728f, 2.55f},
{0.728f, -1.3f, 2.55f},
{0f, -1.3f, 2.55f},
{1.3f, 0f, 2.4f},
{1.3f, -0.728f, 2.4f},
{0.728f, -1.3f, 2.4f},
{0f, -1.3f, 2.4f},
{0f, 0f, 0f},
{1.425f, -0.798f, 0f},
{1.5f, 0f, 0.075f},
{1.425f, 0f, 0f},
{0.798f, -1.425f, 0f},
{0f, -1.5f, 0.075f},
{0f, -1.425f, 0f},
{1.5f, -0.84f, 0.075f},
{0.84f, -1.5f, 0.075f}
};
// Since GL2.glMap2f expects a packed array of floats, we must convert
// from a 3-dimensional array to a 1-dimensional array
private static final float[] teapotTex = {
0, 0, 1, 0, 0, 1, 1, 1
};
private static void teapot(GL2 gl,
int grid,
double scale,
int type,
boolean backCompatible)
{
// As mentioned above, GL2.glMap2f expects a packed array of floats
float[] p = new float[4*4*3];
float[] q = new float[4*4*3];
float[] r = new float[4*4*3];
float[] s = new float[4*4*3];
int i, j, k, l;
gl.glPushAttrib(GL2.GL_ENABLE_BIT | GL2.GL_EVAL_BIT | GL2.GL_POLYGON_BIT);
gl.glEnable(GL2.GL_AUTO_NORMAL);
gl.glEnable(GL2.GL_NORMALIZE);
gl.glEnable(GL2.GL_MAP2_VERTEX_3);
gl.glEnable(GL2.GL_MAP2_TEXTURE_COORD_2);
gl.glPushMatrix();
if (!backCompatible) {
// The time has come to have the teapot no longer be inside out
gl.glFrontFace(GL2.GL_CW);
gl.glScaled(0.5*scale, 0.5*scale, 0.5*scale);
} else {
// We want the teapot in it's backward compatible position and
// orientation
gl.glRotatef(270.0f, 1, 0, 0);
gl.glScalef((float)(0.5 * scale),
(float)(0.5 * scale),
(float)(0.5 * scale));
gl.glTranslatef(0.0f, 0.0f, -1.5f);
}
for (i = 0; i < 10; i++) {
for (j = 0; j < 4; j++) {
for (k = 0; k < 4; k++) {
for (l = 0; l < 3; l++) {
p[(j*4+k)*3+l] = teapotCPData[teapotPatchData[i][j * 4 + k]][l];
q[(j*4+k)*3+l] =
teapotCPData[teapotPatchData[i][j * 4 + (3 - k)]][l];
if (l == 1)
q[(j*4+k)*3+l] *= -1.0;
if (i < 6) {
r[(j*4+k)*3+l] =
teapotCPData[teapotPatchData[i][j * 4 + (3 - k)]][l];
if (l == 0)
r[(j*4+k)*3+l] *= -1.0;
s[(j*4+k)*3+l] = teapotCPData[teapotPatchData[i][j * 4 + k]][l];
if (l == 0)
s[(j*4+k)*3+l] *= -1.0;
if (l == 1)
s[(j*4+k)*3+l] *= -1.0;
}
}
}
}
gl.glMap2f(GL2.GL_MAP2_TEXTURE_COORD_2, 0, 1, 2, 2, 0, 1, 4, 2, teapotTex, 0);
gl.glMap2f(GL2.GL_MAP2_VERTEX_3, 0, 1, 3, 4, 0, 1, 12, 4, p, 0);
gl.glMapGrid2f(grid, 0.0f, 1.0f, grid, 0.0f, 1.0f);
evaluateTeapotMesh(gl, grid, type, i, !backCompatible);
gl.glMap2f(GL2.GL_MAP2_VERTEX_3, 0, 1, 3, 4, 0, 1, 12, 4, q, 0);
evaluateTeapotMesh(gl, grid, type, i, !backCompatible);
if (i < 6) {
gl.glMap2f(GL2.GL_MAP2_VERTEX_3, 0, 1, 3, 4, 0, 1, 12, 4, r, 0);
evaluateTeapotMesh(gl, grid, type, i, !backCompatible);
gl.glMap2f(GL2.GL_MAP2_VERTEX_3, 0, 1, 3, 4, 0, 1, 12, 4, s, 0);
evaluateTeapotMesh(gl, grid, type, i, !backCompatible);
}
}
gl.glPopMatrix();
gl.glPopAttrib();
}
private static void evaluateTeapotMesh(GL2 gl,
int grid,
int type,
int partNum,
boolean repairSingularities)
{
if (repairSingularities && (partNum == 5 || partNum == 3)) {
// Instead of using evaluators that give bad results at singularities,
// evaluate by hand
gl.glPolygonMode(GL2.GL_FRONT_AND_BACK, type);
for (int nv = 0; nv < grid; nv++) {
if (nv == 0) {
// Draw a small triangle-fan to fill the hole
gl.glDisable(GL2.GL_AUTO_NORMAL);
gl.glNormal3f(0, 0, partNum == 3 ? 1 : -1);
gl.glBegin(GL2.GL_TRIANGLE_FAN);
{
gl.glEvalCoord2f(0, 0);
// Note that we draw in clock-wise order to match the evaluator
// method
for (int nu = 0; nu <= grid; nu++)
{
gl.glEvalCoord2f(nu / (float)grid, (1f / grid) / (float)grid);
}
}
gl.glEnd();
gl.glEnable(GL2.GL_AUTO_NORMAL);
}
// Draw the rest of the piece as an evaluated quad-strip
gl.glBegin(GL2.GL_QUAD_STRIP);
{
// Note that we draw in clock-wise order to match the evaluator method
for (int nu = grid; nu >= 0; nu--) {
gl.glEvalCoord2f(nu / (float)grid, (nv + 1) / (float)grid);
gl.glEvalCoord2f(nu / (float)grid, Math.max(nv, 1f / grid)
/ (float)grid);
}
}
gl.glEnd();
}
} else {
gl.glEvalMesh2(type, 0, grid, 0, grid);
}
}
//----------------------------------------------------------------------
// Font implementation
//
private static void bitmapCharacterImpl(GL2 gl, int font, char cin) {
BitmapFontRec fontinfo = getBitmapFont(font);
int c = cin & 0xFFFF;
if (c < fontinfo.first ||
c >= fontinfo.first + fontinfo.num_chars)
return;
BitmapCharRec ch = fontinfo.ch[c - fontinfo.first];
if (ch != null) {
gl.glBitmap(ch.width, ch.height, ch.xorig, ch.yorig,
ch.advance, 0, ch.bitmap, 0);
}
}
private static final BitmapFontRec[] bitmapFonts = new BitmapFontRec[9];
private static final StrokeFontRec[] strokeFonts = new StrokeFontRec[9];
private static BitmapFontRec getBitmapFont(int font) {
BitmapFontRec rec = bitmapFonts[font];
if (rec == null) {
switch (font) {
case BITMAP_9_BY_15:
rec = GLUTBitmap9x15.glutBitmap9By15;
break;
case BITMAP_8_BY_13:
rec = GLUTBitmap8x13.glutBitmap8By13;
break;
case BITMAP_TIMES_ROMAN_10:
rec = GLUTBitmapTimesRoman10.glutBitmapTimesRoman10;
break;
case BITMAP_TIMES_ROMAN_24:
rec = GLUTBitmapTimesRoman24.glutBitmapTimesRoman24;
break;
case BITMAP_HELVETICA_10:
rec = GLUTBitmapHelvetica10.glutBitmapHelvetica10;
break;
case BITMAP_HELVETICA_12:
rec = GLUTBitmapHelvetica12.glutBitmapHelvetica12;
break;
case BITMAP_HELVETICA_18:
rec = GLUTBitmapHelvetica18.glutBitmapHelvetica18;
break;
default:
throw new GLException("Unknown bitmap font number " + font);
}
bitmapFonts[font] = rec;
}
return rec;
}
private static StrokeFontRec getStrokeFont(int font) {
StrokeFontRec rec = strokeFonts[font];
if (rec == null) {
switch (font) {
case STROKE_ROMAN:
rec = GLUTStrokeRoman.glutStrokeRoman;
break;
case STROKE_MONO_ROMAN:
rec = GLUTStrokeMonoRoman.glutStrokeMonoRoman;
break;
default:
throw new GLException("Unknown stroke font number " + font);
}
}
return rec;
}
private static void beginBitmap(GL2 gl,
int[] swapbytes,
int[] lsbfirst,
int[] rowlength,
int[] skiprows,
int[] skippixels,
int[] alignment) {
gl.glGetIntegerv(GL2.GL_UNPACK_SWAP_BYTES, swapbytes, 0);
gl.glGetIntegerv(GL2.GL_UNPACK_LSB_FIRST, lsbfirst, 0);
gl.glGetIntegerv(GL2.GL_UNPACK_ROW_LENGTH, rowlength, 0);
gl.glGetIntegerv(GL2.GL_UNPACK_SKIP_ROWS, skiprows, 0);
gl.glGetIntegerv(GL2.GL_UNPACK_SKIP_PIXELS, skippixels, 0);
gl.glGetIntegerv(GL2.GL_UNPACK_ALIGNMENT, alignment, 0);
/* Little endian machines (DEC Alpha for example) could
benefit from setting GL_UNPACK_LSB_FIRST to GL_TRUE
instead of GL_FALSE, but this would require changing the
generated bitmaps too. */
gl.glPixelStorei(GL2.GL_UNPACK_SWAP_BYTES, GL2.GL_FALSE);
gl.glPixelStorei(GL2.GL_UNPACK_LSB_FIRST, GL2.GL_FALSE);
gl.glPixelStorei(GL2.GL_UNPACK_ROW_LENGTH, 0);
gl.glPixelStorei(GL2.GL_UNPACK_SKIP_ROWS, 0);
gl.glPixelStorei(GL2.GL_UNPACK_SKIP_PIXELS, 0);
gl.glPixelStorei(GL2.GL_UNPACK_ALIGNMENT, 1);
}
private static void endBitmap(GL2 gl,
int[] swapbytes,
int[] lsbfirst,
int[] rowlength,
int[] skiprows,
int[] skippixels,
int[] alignment) {
/* Restore saved modes. */
gl.glPixelStorei(GL2.GL_UNPACK_SWAP_BYTES, swapbytes[0]);
gl.glPixelStorei(GL2.GL_UNPACK_LSB_FIRST, lsbfirst[0]);
gl.glPixelStorei(GL2.GL_UNPACK_ROW_LENGTH, rowlength[0]);
gl.glPixelStorei(GL2.GL_UNPACK_SKIP_ROWS, skiprows[0]);
gl.glPixelStorei(GL2.GL_UNPACK_SKIP_PIXELS, skippixels[0]);
gl.glPixelStorei(GL2.GL_UNPACK_ALIGNMENT, alignment[0]);
}
}