org.lwjgl.opengles.QCOMTiledRendering Maven / Gradle / Ivy
Show all versions of lwjgl-opengles Show documentation
/*
* Copyright LWJGL. All rights reserved.
* License terms: https://www.lwjgl.org/license
* MACHINE GENERATED FILE, DO NOT EDIT
*/
package org.lwjgl.opengles;
import static org.lwjgl.system.Checks.*;
/**
* Native bindings to the QCOM_tiled_rendering extension.
*
* In the handheld graphics space, a typical challenge is achieving efficient rendering performance given the different characteristics of the various
* types of graphics memory. Some types of memory ("slow" memory) are less expensive but have low bandwidth, higher latency, and/or higher power
* consumption, while other types ("fast" memory) are more expensive but have higher bandwidth, lower latency, and/or lower power consumption. In many
* cases, it is more efficient for a graphics processing unit (GPU) to render directly to fast memory, but at most common display resolutions it is not
* practical for a device to contain enough fast memory to accommodate both the full color and depth/stencil buffers (the frame buffer). In some devices,
* this problem can be addressed by providing both types of memory; a large amount of slow memory that is sufficient to store the entire frame buffer, and
* a small, dedicated amount of fast memory that allows the GPU to render with optimal performance. The challenge lies in finding a way for the GPU to
* render to fast memory when it is not large enough to contain the actual frame buffer.
*
* One approach to solving this problem is to design the GPU and/or driver using a tiled rendering architecture. With this approach the render target is
* subdivided into a number of individual tiles, which are sized to fit within the available amount of fast memory. Under normal operation, the entire
* scene will be rendered to each individual tile using a multi-pass technique, in which primitives that lie entirely outside of the tile being rendered
* are trivially discarded. After each tile has been rendered, its contents are saved out to the actual frame buffer in slow memory (a process referred to
* as the "resolve"). The resolve introduces significant overhead, both for the CPU and the GPU. However, even with this additional overhead, rendering
* using this method is usually more efficient than rendering directly to slow memory.
*
* This extension allows the application to specify a rectangular tile rendering area and have full control over the resolves for that area. The
* information given to the driver through this API can be used to perform various optimizations in the driver and hardware. One example optimization is
* being able to reduce the size or number of the resolves. Another optimization might be to reduce the number of passes needed in the tiling approach
* mentioned above. Even traditional rendering GPUs that don't use tiles may benefit from this extension depending on their implemention of certain common
* GPU operations.
*
* One typical use case could involve an application only rendering to select portions of the render target using this technique (which shall be referred
* to as "application tiling"), leaving all other portions of the render target untouched. Therefore, in order to preserve the contents of the untouched
* portions of the render target, the application must request an EGL (or other context management API) configuration with a non-destructive swap. A
* destructive swap may only be used safely if the application renders to the entire area of the render target during each frame (otherwise the contents
* of the untouched portions of the frame buffer will be undefined).
*
* Additionally, care must be taken to avoid the cost of mixing rendering with and without application tiling within a single frame. Rendering without
* application tiling ("normal" rendering) is most efficient when all of the rendering for the entire scene can be encompassed within a single resolve. If
* any portions of the scene are rendered prior to that resolve (such as via a prior resolve, or via application tiling), then that resolve becomes much
* more heavyweight. When this occurs, prior to rendering each tile the fast memory must be populated with the existing contents of the frame buffer
* region corresponding to that tile. This operation can double the cost of resolves, so it is recommended that applications avoid mixing application
* tiling and normal rendering within a single frame. If both rendering methods must be used in the same frame, then the most efficient approach is to
* perform all normal rendering first, followed by rendering done with application tiling. An implicit resolve will occur (if needed) at the start of
* application tiling, so any pending normal rendering operations will be flushed at the time application tiling is initiated. This extension provides
* interfaces for the application to communicate to the driver whether or not rendering done with application tiling depends on the existing contents of
* the specified tile, and whether or not the rendered contents of the specified tile need to be preserved upon completion. This mechanism can be used to
* obtain optimal performance, e.g. when the application knows that every pixel in a tile will be completely rendered or when the resulting contents of
* the depth/stencil buffers do not need to be preserved.
*/
public class QCOMTiledRendering {
/** Accepted by the {@code preserveMask} parameter of StartTilingQCOM and EndTilingQCOM. */
public static final int
GL_COLOR_BUFFER_BIT0_QCOM = 0x1,
GL_COLOR_BUFFER_BIT1_QCOM = 0x2,
GL_COLOR_BUFFER_BIT2_QCOM = 0x4,
GL_COLOR_BUFFER_BIT3_QCOM = 0x8,
GL_COLOR_BUFFER_BIT4_QCOM = 0x10,
GL_COLOR_BUFFER_BIT5_QCOM = 0x20,
GL_COLOR_BUFFER_BIT6_QCOM = 0x40,
GL_COLOR_BUFFER_BIT7_QCOM = 0x80,
GL_DEPTH_BUFFER_BIT0_QCOM = 0x100,
GL_DEPTH_BUFFER_BIT1_QCOM = 0x200,
GL_DEPTH_BUFFER_BIT2_QCOM = 0x400,
GL_DEPTH_BUFFER_BIT3_QCOM = 0x800,
GL_DEPTH_BUFFER_BIT4_QCOM = 0x1000,
GL_DEPTH_BUFFER_BIT5_QCOM = 0x2000,
GL_DEPTH_BUFFER_BIT6_QCOM = 0x4000,
GL_DEPTH_BUFFER_BIT7_QCOM = 0x8000,
GL_STENCIL_BUFFER_BIT0_QCOM = 0x10000,
GL_STENCIL_BUFFER_BIT1_QCOM = 0x20000,
GL_STENCIL_BUFFER_BIT2_QCOM = 0x40000,
GL_STENCIL_BUFFER_BIT3_QCOM = 0x80000,
GL_STENCIL_BUFFER_BIT4_QCOM = 0x100000,
GL_STENCIL_BUFFER_BIT5_QCOM = 0x200000,
GL_STENCIL_BUFFER_BIT6_QCOM = 0x400000,
GL_STENCIL_BUFFER_BIT7_QCOM = 0x800000,
GL_MULTISAMPLE_BUFFER_BIT0_QCOM = 0x1000000,
GL_MULTISAMPLE_BUFFER_BIT1_QCOM = 0x2000000,
GL_MULTISAMPLE_BUFFER_BIT2_QCOM = 0x4000000,
GL_MULTISAMPLE_BUFFER_BIT3_QCOM = 0x8000000,
GL_MULTISAMPLE_BUFFER_BIT4_QCOM = 0x10000000,
GL_MULTISAMPLE_BUFFER_BIT5_QCOM = 0x20000000,
GL_MULTISAMPLE_BUFFER_BIT6_QCOM = 0x40000000,
GL_MULTISAMPLE_BUFFER_BIT7_QCOM = 0x80000000;
static { GLES.initialize(); }
protected QCOMTiledRendering() {
throw new UnsupportedOperationException();
}
static boolean isAvailable(GLESCapabilities caps) {
return checkFunctions(
caps.glStartTilingQCOM, caps.glEndTilingQCOM
);
}
// --- [ glStartTilingQCOM ] ---
public static native void glStartTilingQCOM(int x, int y, int width, int height, int preserveMask);
// --- [ glEndTilingQCOM ] ---
public static native void glEndTilingQCOM(int preserveMask);
}