org.osgi.service.wireadmin.WireConstants Maven / Gradle / Ivy
/*
* Copyright (c) OSGi Alliance (2002, 2008). All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.osgi.service.wireadmin;
/**
* Defines standard names for Wire
properties, wire filter
* attributes, Consumer and Producer service properties.
*
* @version $Revision: 5673 $
*/
public interface WireConstants {
/**
* Wire
property key (named wireadmin.pid
) specifying
* the persistent identity (PID) of this Wire
object.
*
*
* Each Wire
object has a PID to allow unique and persistent
* identification of a specific Wire
object. The PID must be
* generated by the {@link WireAdmin} service when the Wire
* object is created.
*
*
* This wire property is automatically set by the Wire Admin service. The
* value of the property must be of type String
.
*/
public final static String WIREADMIN_PID = "wireadmin.pid";
/**
* A service registration property for a Producer service that is composite.
* It contains the names of the composite Consumer services it can
* inter-operate with. Inter-operability exists when any name in this array
* matches any name in the array set by the Consumer service. The type of
* this property must be String[]
.
*/
public final static String WIREADMIN_PRODUCER_COMPOSITE = "wireadmin.producer.composite";
/**
* A service registration property for a Consumer service that is composite.
* It contains the names of the composite Producer services it can cooperate
* with. Inter-operability exists when any name in this array matches any
* name in the array set by the Producer service. The type of this property
* must be String[]
.
*/
public final static String WIREADMIN_CONSUMER_COMPOSITE = "wireadmin.consumer.composite";
/**
* Service registration property key (named
* wireadmin.producer.scope
) specifying a list of names that may
* be used to define the scope of this Wire
object. A Producer
* service should set this service property when it can produce more than
* one kind of value. This property is only used during registration,
* modifying the property must not have any effect of the Wire
* object's scope. Each name in the given list mist have
* WirePermission[name,PRODUCE]
or else is ignored. The type of
* this service registration property must be String[]
.
*
* @see Wire#getScope
* @see #WIREADMIN_CONSUMER_SCOPE
*/
public final static String WIREADMIN_PRODUCER_SCOPE = "wireadmin.producer.scope";
/**
* Service registration property key (named
* wireadmin.consumer.scope
) specifying a list of names that may
* be used to define the scope of this Wire
object. A
* Consumer
service should set this service property when it can
* produce more than one kind of value. This property is only used during
* registration, modifying the property must not have any effect of the
* Wire
object's scope. Each name in the given list mist have
* WirePermission[name,CONSUME]
or else is ignored. The type of this
* service registration property must be String[]
.
*
* @see Wire#getScope
* @see #WIREADMIN_PRODUCER_SCOPE
*/
public final static String WIREADMIN_CONSUMER_SCOPE = "wireadmin.consumer.scope";
/**
* Matches all scope names.
*/
public final static String WIREADMIN_SCOPE_ALL[] = {"*"};
/**
* Wire
property key (named wireadmin.producer.pid
)
* specifying the service.pid
of the associated Producer service.
*
*
* This wire property is automatically set by the WireAdmin service. The
* value of the property must be of type String
.
*/
public final static String WIREADMIN_PRODUCER_PID = "wireadmin.producer.pid";
/**
* Wire
property key (named wireadmin.consumer.pid
)
* specifying the service.pid
of the associated Consumer service.
*
*
* This wire property is automatically set by the Wire Admin service. The
* value of the property must be of type String
.
*/
public final static String WIREADMIN_CONSUMER_PID = "wireadmin.consumer.pid";
/**
* Wire
property key (named wireadmin.filter
)
* specifying a filter used to control the delivery rate of data between the
* Producer and the Consumer service.
*
*
* This property should contain a filter as described in the Filter
* class. The filter can be used to specify when an updated value from the
* Producer service should be delivered to the Consumer service. In many
* cases the Consumer service does not need to receive the data with the
* same rate that the Producer service can generate data. This property can
* be used to control the delivery rate.
*
* The filter can use a number of pre-defined attributes that can be used to
* control the delivery of new data values. If the filter produces a match
* upon the wire filter attributes, the Consumer service should be notifed
* of the updated data value.
*
* If the Producer service was registered with the
* {@link #WIREADMIN_PRODUCER_FILTERS} service property indicating that the
* Producer service will perform the data filtering then the Wire
* object will not perform data filtering. Otherwise, the Wire
* object must perform basic filtering. Basic filtering includes supporting
* the following standard wire filter attributes:
*
* - {@link #WIREVALUE_CURRENT}- Current value
*
- {@link #WIREVALUE_PREVIOUS}- Previous value
*
- {@link #WIREVALUE_DELTA_ABSOLUTE}- Absolute delta
*
- {@link #WIREVALUE_DELTA_RELATIVE}- Relative delta
*
- {@link #WIREVALUE_ELAPSED}- Elapsed time
*
*
* @see org.osgi.framework.Filter
*/
public final static String WIREADMIN_FILTER = "wireadmin.filter";
/* Wire filter attribute names. */
/**
* Wire
object's filter attribute (named
* wirevalue.current
) representing the current value.
*/
public final static String WIREVALUE_CURRENT = "wirevalue.current";
/**
* Wire
object's filter attribute (named
* wirevalue.previous
) representing the previous value.
*/
public final static String WIREVALUE_PREVIOUS = "wirevalue.previous";
/**
* Wire
object's filter attribute (named
* wirevalue.delta.absolute
) representing the absolute delta.
* The absolute (always positive) difference between the last update and the
* current value (only when numeric). This attribute must not be used when
* the values are not numeric.
*/
public final static String WIREVALUE_DELTA_ABSOLUTE = "wirevalue.delta.absolute";
/**
* Wire
object's filter attribute (named
* wirevalue.delta.relative
) representing the relative delta.
* The relative difference is |previous
-current
|/|
* current
| (only when numeric). This attribute must not be used
* when the values are not numeric.
*/
public final static String WIREVALUE_DELTA_RELATIVE = "wirevalue.delta.relative";
/**
* Wire
object's filter attribute (named
* wirevalue.elapsed
) representing the elapsed time, in ms,
* between this filter evaluation and the last update of the
* Consumer
service.
*/
public final static String WIREVALUE_ELAPSED = "wirevalue.elapsed";
/* Service registration property key names. */
/**
* Service Registration property (named wireadmin.producer.filters
).
* A Producer
service registered with this property indicates to
* the Wire Admin service that the Producer service implements at least the
* filtering as described for the {@link #WIREADMIN_FILTER} property. If the
* Producer service is not registered with this property, the Wire
* object must perform the basic filtering as described in
* {@link #WIREADMIN_FILTER}.
*
*
* The type of the property value is not relevant. Only its presence is
* relevant.
*/
public final static String WIREADMIN_PRODUCER_FILTERS = "wireadmin.producer.filters";
/**
* Service Registration property (named wireadmin.consumer.flavors
)
* specifying the list of data types understood by this Consumer service.
*
*
* The Consumer service object must be registered with this service
* property. The list must be in the order of preference with the first type
* being the most preferred. The value of the property must be of type
* Class[]
.
*/
public final static String WIREADMIN_CONSUMER_FLAVORS = "wireadmin.consumer.flavors";
/**
* Service Registration property (named wireadmin.producer.flavors
)
* specifying the list of data types available from this Producer service.
*
*
* The Producer service object should be registered with this service
* property.
*
*
* The value of the property must be of type Class[]
.
*/
public final static String WIREADMIN_PRODUCER_FLAVORS = "wireadmin.producer.flavors";
/**
* Service Registration property (named wireadmin.events
)
* specifying the WireAdminEvent
type of interest to a Wire Admin
* Listener service. The value of the property is a bitwise OR of all the
* WireAdminEvent
types the Wire Admin Listener service wishes to
* receive and must be of type Integer
.
*
* @see WireAdminEvent
*/
public final static String WIREADMIN_EVENTS = "wireadmin.events";
}