com.pulumi.awsnative.route53.kotlin.inputs.HealthCheckConfigPropertiesArgs.kt Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of pulumi-aws-native-kotlin Show documentation
Show all versions of pulumi-aws-native-kotlin Show documentation
Build cloud applications and infrastructure by combining the safety and reliability of infrastructure as code with the power of the Kotlin programming language.
@file:Suppress("NAME_SHADOWING", "DEPRECATION")
package com.pulumi.awsnative.route53.kotlin.inputs
import com.pulumi.awsnative.route53.inputs.HealthCheckConfigPropertiesArgs.builder
import com.pulumi.awsnative.route53.kotlin.enums.HealthCheckConfigPropertiesInsufficientDataHealthStatus
import com.pulumi.awsnative.route53.kotlin.enums.HealthCheckConfigPropertiesType
import com.pulumi.core.Output
import com.pulumi.core.Output.of
import com.pulumi.kotlin.ConvertibleToJava
import com.pulumi.kotlin.PulumiNullFieldException
import com.pulumi.kotlin.PulumiTagMarker
import com.pulumi.kotlin.applySuspend
import kotlin.Boolean
import kotlin.Int
import kotlin.String
import kotlin.Suppress
import kotlin.Unit
import kotlin.collections.List
import kotlin.jvm.JvmName
/**
* A complex type that contains information about the health check.
* @property alarmIdentifier A complex type that identifies the CloudWatch alarm that you want Amazon Route 53 health checkers to use to determine whether the specified health check is healthy.
* @property childHealthChecks (CALCULATED Health Checks Only) A complex type that contains one `ChildHealthCheck` element for each health check that you want to associate with a `CALCULATED` health check.
* @property enableSni Specify whether you want Amazon Route 53 to send the value of `FullyQualifiedDomainName` to the endpoint in the `client_hello` message during TLS negotiation. This allows the endpoint to respond to `HTTPS` health check requests with the applicable SSL/TLS certificate.
* Some endpoints require that `HTTPS` requests include the host name in the `client_hello` message. If you don't enable SNI, the status of the health check will be `SSL alert handshake_failure` . A health check can also have that status for other reasons. If SNI is enabled and you're still getting the error, check the SSL/TLS configuration on your endpoint and confirm that your certificate is valid.
* The SSL/TLS certificate on your endpoint includes a domain name in the `Common Name` field and possibly several more in the `Subject Alternative Names` field. One of the domain names in the certificate should match the value that you specify for `FullyQualifiedDomainName` . If the endpoint responds to the `client_hello` message with a certificate that does not include the domain name that you specified in `FullyQualifiedDomainName` , a health checker will retry the handshake. In the second attempt, the health checker will omit `FullyQualifiedDomainName` from the `client_hello` message.
* @property failureThreshold The number of consecutive health checks that an endpoint must pass or fail for Amazon Route 53 to change the current status of the endpoint from unhealthy to healthy or vice versa. For more information, see [How Amazon Route 53 Determines Whether an Endpoint Is Healthy](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html) in the *Amazon Route 53 Developer Guide* .
* If you don't specify a value for `FailureThreshold` , the default value is three health checks.
* @property fullyQualifiedDomainName Amazon Route 53 behavior depends on whether you specify a value for `IPAddress` .
* *If you specify a value for* `IPAddress` :
* Amazon Route 53 sends health check requests to the specified IPv4 or IPv6 address and passes the value of `FullyQualifiedDomainName` in the `Host` header for all health checks except TCP health checks. This is typically the fully qualified DNS name of the endpoint on which you want Route 53 to perform health checks.
* When Route 53 checks the health of an endpoint, here is how it constructs the `Host` header:
* - If you specify a value of `80` for `Port` and `HTTP` or `HTTP_STR_MATCH` for `Type` , Route 53 passes the value of `FullyQualifiedDomainName` to the endpoint in the Host header.
* - If you specify a value of `443` for `Port` and `HTTPS` or `HTTPS_STR_MATCH` for `Type` , Route 53 passes the value of `FullyQualifiedDomainName` to the endpoint in the `Host` header.
* - If you specify another value for `Port` and any value except `TCP` for `Type` , Route 53 passes `FullyQualifiedDomainName:Port` to the endpoint in the `Host` header.
* If you don't specify a value for `FullyQualifiedDomainName` , Route 53 substitutes the value of `IPAddress` in the `Host` header in each of the preceding cases.
* *If you don't specify a value for `IPAddress`* :
* Route 53 sends a DNS request to the domain that you specify for `FullyQualifiedDomainName` at the interval that you specify for `RequestInterval` . Using an IPv4 address that DNS returns, Route 53 then checks the health of the endpoint.
* > If you don't specify a value for `IPAddress` , Route 53 uses only IPv4 to send health checks to the endpoint. If there's no record with a type of A for the name that you specify for `FullyQualifiedDomainName` , the health check fails with a "DNS resolution failed" error.
* If you want to check the health of multiple records that have the same name and type, such as multiple weighted records, and if you choose to specify the endpoint only by `FullyQualifiedDomainName` , we recommend that you create a separate health check for each endpoint. For example, create a health check for each HTTP server that is serving content for www.example.com. For the value of `FullyQualifiedDomainName` , specify the domain name of the server (such as us-east-2-www.example.com), not the name of the records (www.example.com).
* > In this configuration, if you create a health check for which the value of `FullyQualifiedDomainName` matches the name of the records and you then associate the health check with those records, health check results will be unpredictable.
* In addition, if the value that you specify for `Type` is `HTTP` , `HTTPS` , `HTTP_STR_MATCH` , or `HTTPS_STR_MATCH` , Route 53 passes the value of `FullyQualifiedDomainName` in the `Host` header, as it does when you specify a value for `IPAddress` . If the value of `Type` is `TCP` , Route 53 doesn't pass a `Host` header.
* @property healthThreshold The number of child health checks that are associated with a `CALCULATED` health check that Amazon Route 53 must consider healthy for the `CALCULATED` health check to be considered healthy. To specify the child health checks that you want to associate with a `CALCULATED` health check, use the [ChildHealthChecks](https://docs.aws.amazon.com/Route53/latest/APIReference/API_UpdateHealthCheck.html#Route53-UpdateHealthCheck-request-ChildHealthChecks) element.
* Note the following:
* - If you specify a number greater than the number of child health checks, Route 53 always considers this health check to be unhealthy.
* - If you specify `0` , Route 53 always considers this health check to be healthy.
* @property insufficientDataHealthStatus When CloudWatch has insufficient data about the metric to determine the alarm state, the status that you want Amazon Route 53 to assign to the health check:
* - `Healthy` : Route 53 considers the health check to be healthy.
* - `Unhealthy` : Route 53 considers the health check to be unhealthy.
* - `LastKnownStatus` : Route 53 uses the status of the health check from the last time that CloudWatch had sufficient data to determine the alarm state. For new health checks that have no last known status, the default status for the health check is healthy.
* @property inverted Specify whether you want Amazon Route 53 to invert the status of a health check, for example, to consider a health check unhealthy when it otherwise would be considered healthy.
* @property ipAddress The IPv4 or IPv6 IP address of the endpoint that you want Amazon Route 53 to perform health checks on. If you don't specify a value for `IPAddress` , Route 53 sends a DNS request to resolve the domain name that you specify in `FullyQualifiedDomainName` at the interval that you specify in `RequestInterval` . Using an IP address returned by DNS, Route 53 then checks the health of the endpoint.
* Use one of the following formats for the value of `IPAddress` :
* - *IPv4 address* : four values between 0 and 255, separated by periods (.), for example, `192.0.2.44` .
* - *IPv6 address* : eight groups of four hexadecimal values, separated by colons (:), for example, `2001:0db8:85a3:0000:0000:abcd:0001:2345` . You can also shorten IPv6 addresses as described in RFC 5952, for example, `2001:db8:85a3::abcd:1:2345` .
* If the endpoint is an EC2 instance, we recommend that you create an Elastic IP address, associate it with your EC2 instance, and specify the Elastic IP address for `IPAddress` . This ensures that the IP address of your instance will never change.
* For more information, see [FullyQualifiedDomainName](https://docs.aws.amazon.com/Route53/latest/APIReference/API_UpdateHealthCheck.html#Route53-UpdateHealthCheck-request-FullyQualifiedDomainName) .
* Constraints: Route 53 can't check the health of endpoints for which the IP address is in local, private, non-routable, or multicast ranges. For more information about IP addresses for which you can't create health checks, see the following documents:
* - [RFC 5735, Special Use IPv4 Addresses](https://docs.aws.amazon.com/https://tools.ietf.org/html/rfc5735)
* - [RFC 6598, IANA-Reserved IPv4 Prefix for Shared Address Space](https://docs.aws.amazon.com/https://tools.ietf.org/html/rfc6598)
* - [RFC 5156, Special-Use IPv6 Addresses](https://docs.aws.amazon.com/https://tools.ietf.org/html/rfc5156)
* When the value of `Type` is `CALCULATED` or `CLOUDWATCH_METRIC` , omit `IPAddress` .
* @property measureLatency Specify whether you want Amazon Route 53 to measure the latency between health checkers in multiple AWS regions and your endpoint, and to display CloudWatch latency graphs on the *Health Checks* page in the Route 53 console.
* > You can't change the value of `MeasureLatency` after you create a health check.
* @property port The port on the endpoint that you want Amazon Route 53 to perform health checks on.
* > Don't specify a value for `Port` when you specify a value for [Type](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-type) of `CLOUDWATCH_METRIC` or `CALCULATED` .
* @property regions A complex type that contains one `Region` element for each region from which you want Amazon Route 53 health checkers to check the specified endpoint.
* If you don't specify any regions, Route 53 health checkers automatically performs checks from all of the regions that are listed under *Valid Values* .
* If you update a health check to remove a region that has been performing health checks, Route 53 will briefly continue to perform checks from that region to ensure that some health checkers are always checking the endpoint (for example, if you replace three regions with four different regions).
* @property requestInterval The number of seconds between the time that Amazon Route 53 gets a response from your endpoint and the time that it sends the next health check request. Each Route 53 health checker makes requests at this interval.
* > You can't change the value of `RequestInterval` after you create a health check.
* If you don't specify a value for `RequestInterval` , the default value is `30` seconds.
* @property resourcePath The path, if any, that you want Amazon Route 53 to request when performing health checks. The path can be any value for which your endpoint will return an HTTP status code of 2xx or 3xx when the endpoint is healthy, for example, the file /docs/route53-health-check.html. You can also include query string parameters, for example, `/welcome.html?language=jp&login=y` .
* @property routingControlArn The Amazon Resource Name (ARN) for the Route 53 Application Recovery Controller routing control.
* For more information about Route 53 Application Recovery Controller, see [Route 53 Application Recovery Controller Developer Guide.](https://docs.aws.amazon.com/r53recovery/latest/dg/what-is-route-53-recovery.html) .
* @property searchString If the value of Type is `HTTP_STR_MATCH` or `HTTPS_STR_MATCH` , the string that you want Amazon Route 53 to search for in the response body from the specified resource. If the string appears in the response body, Route 53 considers the resource healthy.
* Route 53 considers case when searching for `SearchString` in the response body.
* @property type The type of health check that you want to create, which indicates how Amazon Route 53 determines whether an endpoint is healthy.
* > You can't change the value of `Type` after you create a health check.
* You can create the following types of health checks:
* - *HTTP* : Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTP request and waits for an HTTP status code of 200 or greater and less than 400.
* - *HTTPS* : Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTPS request and waits for an HTTP status code of 200 or greater and less than 400.
* > If you specify `HTTPS` for the value of `Type` , the endpoint must support TLS v1.0 or later.
* - *HTTP_STR_MATCH* : Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTP request and searches the first 5,120 bytes of the response body for the string that you specify in `SearchString` .
* - *HTTPS_STR_MATCH* : Route 53 tries to establish a TCP connection. If successful, Route 53 submits an `HTTPS` request and searches the first 5,120 bytes of the response body for the string that you specify in `SearchString` .
* - *TCP* : Route 53 tries to establish a TCP connection.
* - *CLOUDWATCH_METRIC* : The health check is associated with a CloudWatch alarm. If the state of the alarm is `OK` , the health check is considered healthy. If the state is `ALARM` , the health check is considered unhealthy. If CloudWatch doesn't have sufficient data to determine whether the state is `OK` or `ALARM` , the health check status depends on the setting for `InsufficientDataHealthStatus` : `Healthy` , `Unhealthy` , or `LastKnownStatus` .
* > Route 53 supports CloudWatch alarms with the following features:
* >
* > - Standard-resolution metrics. High-resolution metrics aren't supported. For more information, see [High-Resolution Metrics](https://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/publishingMetrics.html#high-resolution-metrics) in the *Amazon CloudWatch User Guide* .
* > - Statistics: Average, Minimum, Maximum, Sum, and SampleCount. Extended statistics aren't supported.
* - *CALCULATED* : For health checks that monitor the status of other health checks, Route 53 adds up the number of health checks that Route 53 health checkers consider to be healthy and compares that number with the value of `HealthThreshold` .
* - *RECOVERY_CONTROL* : The health check is assocated with a Route53 Application Recovery Controller routing control. If the routing control state is `ON` , the health check is considered healthy. If the state is `OFF` , the health check is considered unhealthy.
* For more information, see [How Route 53 Determines Whether an Endpoint Is Healthy](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html) in the *Amazon Route 53 Developer Guide* .
*/
public data class HealthCheckConfigPropertiesArgs(
public val alarmIdentifier: Output? = null,
public val childHealthChecks: Output>? = null,
public val enableSni: Output? = null,
public val failureThreshold: Output? = null,
public val fullyQualifiedDomainName: Output? = null,
public val healthThreshold: Output? = null,
public val insufficientDataHealthStatus: Output? = null,
public val inverted: Output? = null,
public val ipAddress: Output? = null,
public val measureLatency: Output? = null,
public val port: Output? = null,
public val regions: Output>? = null,
public val requestInterval: Output? = null,
public val resourcePath: Output? = null,
public val routingControlArn: Output? = null,
public val searchString: Output? = null,
public val type: Output,
) : ConvertibleToJava {
override fun toJava(): com.pulumi.awsnative.route53.inputs.HealthCheckConfigPropertiesArgs =
com.pulumi.awsnative.route53.inputs.HealthCheckConfigPropertiesArgs.builder()
.alarmIdentifier(alarmIdentifier?.applyValue({ args0 -> args0.let({ args0 -> args0.toJava() }) }))
.childHealthChecks(childHealthChecks?.applyValue({ args0 -> args0.map({ args0 -> args0 }) }))
.enableSni(enableSni?.applyValue({ args0 -> args0 }))
.failureThreshold(failureThreshold?.applyValue({ args0 -> args0 }))
.fullyQualifiedDomainName(fullyQualifiedDomainName?.applyValue({ args0 -> args0 }))
.healthThreshold(healthThreshold?.applyValue({ args0 -> args0 }))
.insufficientDataHealthStatus(
insufficientDataHealthStatus?.applyValue({ args0 ->
args0.let({ args0 -> args0.toJava() })
}),
)
.inverted(inverted?.applyValue({ args0 -> args0 }))
.ipAddress(ipAddress?.applyValue({ args0 -> args0 }))
.measureLatency(measureLatency?.applyValue({ args0 -> args0 }))
.port(port?.applyValue({ args0 -> args0 }))
.regions(regions?.applyValue({ args0 -> args0.map({ args0 -> args0 }) }))
.requestInterval(requestInterval?.applyValue({ args0 -> args0 }))
.resourcePath(resourcePath?.applyValue({ args0 -> args0 }))
.routingControlArn(routingControlArn?.applyValue({ args0 -> args0 }))
.searchString(searchString?.applyValue({ args0 -> args0 }))
.type(type.applyValue({ args0 -> args0.let({ args0 -> args0.toJava() }) })).build()
}
/**
* Builder for [HealthCheckConfigPropertiesArgs].
*/
@PulumiTagMarker
public class HealthCheckConfigPropertiesArgsBuilder internal constructor() {
private var alarmIdentifier: Output? = null
private var childHealthChecks: Output>? = null
private var enableSni: Output? = null
private var failureThreshold: Output? = null
private var fullyQualifiedDomainName: Output? = null
private var healthThreshold: Output? = null
private var insufficientDataHealthStatus:
Output? = null
private var inverted: Output? = null
private var ipAddress: Output? = null
private var measureLatency: Output? = null
private var port: Output? = null
private var regions: Output>? = null
private var requestInterval: Output? = null
private var resourcePath: Output? = null
private var routingControlArn: Output? = null
private var searchString: Output? = null
private var type: Output? = null
/**
* @param value A complex type that identifies the CloudWatch alarm that you want Amazon Route 53 health checkers to use to determine whether the specified health check is healthy.
*/
@JvmName("qcxthbkympyqfenf")
public suspend fun alarmIdentifier(`value`: Output) {
this.alarmIdentifier = value
}
/**
* @param value (CALCULATED Health Checks Only) A complex type that contains one `ChildHealthCheck` element for each health check that you want to associate with a `CALCULATED` health check.
*/
@JvmName("rprmdqpfqnsrweiu")
public suspend fun childHealthChecks(`value`: Output>) {
this.childHealthChecks = value
}
@JvmName("lqhkqxaeygcsimgg")
public suspend fun childHealthChecks(vararg values: Output) {
this.childHealthChecks = Output.all(values.asList())
}
/**
* @param values (CALCULATED Health Checks Only) A complex type that contains one `ChildHealthCheck` element for each health check that you want to associate with a `CALCULATED` health check.
*/
@JvmName("oxmgngprakqvpnst")
public suspend fun childHealthChecks(values: List>) {
this.childHealthChecks = Output.all(values)
}
/**
* @param value Specify whether you want Amazon Route 53 to send the value of `FullyQualifiedDomainName` to the endpoint in the `client_hello` message during TLS negotiation. This allows the endpoint to respond to `HTTPS` health check requests with the applicable SSL/TLS certificate.
* Some endpoints require that `HTTPS` requests include the host name in the `client_hello` message. If you don't enable SNI, the status of the health check will be `SSL alert handshake_failure` . A health check can also have that status for other reasons. If SNI is enabled and you're still getting the error, check the SSL/TLS configuration on your endpoint and confirm that your certificate is valid.
* The SSL/TLS certificate on your endpoint includes a domain name in the `Common Name` field and possibly several more in the `Subject Alternative Names` field. One of the domain names in the certificate should match the value that you specify for `FullyQualifiedDomainName` . If the endpoint responds to the `client_hello` message with a certificate that does not include the domain name that you specified in `FullyQualifiedDomainName` , a health checker will retry the handshake. In the second attempt, the health checker will omit `FullyQualifiedDomainName` from the `client_hello` message.
*/
@JvmName("biwrscnfanupaihe")
public suspend fun enableSni(`value`: Output) {
this.enableSni = value
}
/**
* @param value The number of consecutive health checks that an endpoint must pass or fail for Amazon Route 53 to change the current status of the endpoint from unhealthy to healthy or vice versa. For more information, see [How Amazon Route 53 Determines Whether an Endpoint Is Healthy](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html) in the *Amazon Route 53 Developer Guide* .
* If you don't specify a value for `FailureThreshold` , the default value is three health checks.
*/
@JvmName("lvwswbexhbavyccr")
public suspend fun failureThreshold(`value`: Output) {
this.failureThreshold = value
}
/**
* @param value Amazon Route 53 behavior depends on whether you specify a value for `IPAddress` .
* *If you specify a value for* `IPAddress` :
* Amazon Route 53 sends health check requests to the specified IPv4 or IPv6 address and passes the value of `FullyQualifiedDomainName` in the `Host` header for all health checks except TCP health checks. This is typically the fully qualified DNS name of the endpoint on which you want Route 53 to perform health checks.
* When Route 53 checks the health of an endpoint, here is how it constructs the `Host` header:
* - If you specify a value of `80` for `Port` and `HTTP` or `HTTP_STR_MATCH` for `Type` , Route 53 passes the value of `FullyQualifiedDomainName` to the endpoint in the Host header.
* - If you specify a value of `443` for `Port` and `HTTPS` or `HTTPS_STR_MATCH` for `Type` , Route 53 passes the value of `FullyQualifiedDomainName` to the endpoint in the `Host` header.
* - If you specify another value for `Port` and any value except `TCP` for `Type` , Route 53 passes `FullyQualifiedDomainName:Port` to the endpoint in the `Host` header.
* If you don't specify a value for `FullyQualifiedDomainName` , Route 53 substitutes the value of `IPAddress` in the `Host` header in each of the preceding cases.
* *If you don't specify a value for `IPAddress`* :
* Route 53 sends a DNS request to the domain that you specify for `FullyQualifiedDomainName` at the interval that you specify for `RequestInterval` . Using an IPv4 address that DNS returns, Route 53 then checks the health of the endpoint.
* > If you don't specify a value for `IPAddress` , Route 53 uses only IPv4 to send health checks to the endpoint. If there's no record with a type of A for the name that you specify for `FullyQualifiedDomainName` , the health check fails with a "DNS resolution failed" error.
* If you want to check the health of multiple records that have the same name and type, such as multiple weighted records, and if you choose to specify the endpoint only by `FullyQualifiedDomainName` , we recommend that you create a separate health check for each endpoint. For example, create a health check for each HTTP server that is serving content for www.example.com. For the value of `FullyQualifiedDomainName` , specify the domain name of the server (such as us-east-2-www.example.com), not the name of the records (www.example.com).
* > In this configuration, if you create a health check for which the value of `FullyQualifiedDomainName` matches the name of the records and you then associate the health check with those records, health check results will be unpredictable.
* In addition, if the value that you specify for `Type` is `HTTP` , `HTTPS` , `HTTP_STR_MATCH` , or `HTTPS_STR_MATCH` , Route 53 passes the value of `FullyQualifiedDomainName` in the `Host` header, as it does when you specify a value for `IPAddress` . If the value of `Type` is `TCP` , Route 53 doesn't pass a `Host` header.
*/
@JvmName("naatikweyuitkuiw")
public suspend fun fullyQualifiedDomainName(`value`: Output) {
this.fullyQualifiedDomainName = value
}
/**
* @param value The number of child health checks that are associated with a `CALCULATED` health check that Amazon Route 53 must consider healthy for the `CALCULATED` health check to be considered healthy. To specify the child health checks that you want to associate with a `CALCULATED` health check, use the [ChildHealthChecks](https://docs.aws.amazon.com/Route53/latest/APIReference/API_UpdateHealthCheck.html#Route53-UpdateHealthCheck-request-ChildHealthChecks) element.
* Note the following:
* - If you specify a number greater than the number of child health checks, Route 53 always considers this health check to be unhealthy.
* - If you specify `0` , Route 53 always considers this health check to be healthy.
*/
@JvmName("ruygxcvhyorksmrt")
public suspend fun healthThreshold(`value`: Output) {
this.healthThreshold = value
}
/**
* @param value When CloudWatch has insufficient data about the metric to determine the alarm state, the status that you want Amazon Route 53 to assign to the health check:
* - `Healthy` : Route 53 considers the health check to be healthy.
* - `Unhealthy` : Route 53 considers the health check to be unhealthy.
* - `LastKnownStatus` : Route 53 uses the status of the health check from the last time that CloudWatch had sufficient data to determine the alarm state. For new health checks that have no last known status, the default status for the health check is healthy.
*/
@JvmName("stkslqqkyhkehgjy")
public suspend fun insufficientDataHealthStatus(`value`: Output) {
this.insufficientDataHealthStatus = value
}
/**
* @param value Specify whether you want Amazon Route 53 to invert the status of a health check, for example, to consider a health check unhealthy when it otherwise would be considered healthy.
*/
@JvmName("erxijfukdtgghnlx")
public suspend fun inverted(`value`: Output) {
this.inverted = value
}
/**
* @param value The IPv4 or IPv6 IP address of the endpoint that you want Amazon Route 53 to perform health checks on. If you don't specify a value for `IPAddress` , Route 53 sends a DNS request to resolve the domain name that you specify in `FullyQualifiedDomainName` at the interval that you specify in `RequestInterval` . Using an IP address returned by DNS, Route 53 then checks the health of the endpoint.
* Use one of the following formats for the value of `IPAddress` :
* - *IPv4 address* : four values between 0 and 255, separated by periods (.), for example, `192.0.2.44` .
* - *IPv6 address* : eight groups of four hexadecimal values, separated by colons (:), for example, `2001:0db8:85a3:0000:0000:abcd:0001:2345` . You can also shorten IPv6 addresses as described in RFC 5952, for example, `2001:db8:85a3::abcd:1:2345` .
* If the endpoint is an EC2 instance, we recommend that you create an Elastic IP address, associate it with your EC2 instance, and specify the Elastic IP address for `IPAddress` . This ensures that the IP address of your instance will never change.
* For more information, see [FullyQualifiedDomainName](https://docs.aws.amazon.com/Route53/latest/APIReference/API_UpdateHealthCheck.html#Route53-UpdateHealthCheck-request-FullyQualifiedDomainName) .
* Constraints: Route 53 can't check the health of endpoints for which the IP address is in local, private, non-routable, or multicast ranges. For more information about IP addresses for which you can't create health checks, see the following documents:
* - [RFC 5735, Special Use IPv4 Addresses](https://docs.aws.amazon.com/https://tools.ietf.org/html/rfc5735)
* - [RFC 6598, IANA-Reserved IPv4 Prefix for Shared Address Space](https://docs.aws.amazon.com/https://tools.ietf.org/html/rfc6598)
* - [RFC 5156, Special-Use IPv6 Addresses](https://docs.aws.amazon.com/https://tools.ietf.org/html/rfc5156)
* When the value of `Type` is `CALCULATED` or `CLOUDWATCH_METRIC` , omit `IPAddress` .
*/
@JvmName("rpalicoxhemyouvq")
public suspend fun ipAddress(`value`: Output) {
this.ipAddress = value
}
/**
* @param value Specify whether you want Amazon Route 53 to measure the latency between health checkers in multiple AWS regions and your endpoint, and to display CloudWatch latency graphs on the *Health Checks* page in the Route 53 console.
* > You can't change the value of `MeasureLatency` after you create a health check.
*/
@JvmName("tkgfchrxoblltcmh")
public suspend fun measureLatency(`value`: Output) {
this.measureLatency = value
}
/**
* @param value The port on the endpoint that you want Amazon Route 53 to perform health checks on.
* > Don't specify a value for `Port` when you specify a value for [Type](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-type) of `CLOUDWATCH_METRIC` or `CALCULATED` .
*/
@JvmName("qqhtqvctuqrspmct")
public suspend fun port(`value`: Output) {
this.port = value
}
/**
* @param value A complex type that contains one `Region` element for each region from which you want Amazon Route 53 health checkers to check the specified endpoint.
* If you don't specify any regions, Route 53 health checkers automatically performs checks from all of the regions that are listed under *Valid Values* .
* If you update a health check to remove a region that has been performing health checks, Route 53 will briefly continue to perform checks from that region to ensure that some health checkers are always checking the endpoint (for example, if you replace three regions with four different regions).
*/
@JvmName("hgunqlicitqqhkfj")
public suspend fun regions(`value`: Output>) {
this.regions = value
}
@JvmName("lhopsrcojiaecvif")
public suspend fun regions(vararg values: Output) {
this.regions = Output.all(values.asList())
}
/**
* @param values A complex type that contains one `Region` element for each region from which you want Amazon Route 53 health checkers to check the specified endpoint.
* If you don't specify any regions, Route 53 health checkers automatically performs checks from all of the regions that are listed under *Valid Values* .
* If you update a health check to remove a region that has been performing health checks, Route 53 will briefly continue to perform checks from that region to ensure that some health checkers are always checking the endpoint (for example, if you replace three regions with four different regions).
*/
@JvmName("xyihgtxumpayxxim")
public suspend fun regions(values: List>) {
this.regions = Output.all(values)
}
/**
* @param value The number of seconds between the time that Amazon Route 53 gets a response from your endpoint and the time that it sends the next health check request. Each Route 53 health checker makes requests at this interval.
* > You can't change the value of `RequestInterval` after you create a health check.
* If you don't specify a value for `RequestInterval` , the default value is `30` seconds.
*/
@JvmName("osebhdeqbmqujxti")
public suspend fun requestInterval(`value`: Output) {
this.requestInterval = value
}
/**
* @param value The path, if any, that you want Amazon Route 53 to request when performing health checks. The path can be any value for which your endpoint will return an HTTP status code of 2xx or 3xx when the endpoint is healthy, for example, the file /docs/route53-health-check.html. You can also include query string parameters, for example, `/welcome.html?language=jp&login=y` .
*/
@JvmName("cnduqkkdcjolpijv")
public suspend fun resourcePath(`value`: Output) {
this.resourcePath = value
}
/**
* @param value The Amazon Resource Name (ARN) for the Route 53 Application Recovery Controller routing control.
* For more information about Route 53 Application Recovery Controller, see [Route 53 Application Recovery Controller Developer Guide.](https://docs.aws.amazon.com/r53recovery/latest/dg/what-is-route-53-recovery.html) .
*/
@JvmName("ndvufvbnlnxcrfos")
public suspend fun routingControlArn(`value`: Output) {
this.routingControlArn = value
}
/**
* @param value If the value of Type is `HTTP_STR_MATCH` or `HTTPS_STR_MATCH` , the string that you want Amazon Route 53 to search for in the response body from the specified resource. If the string appears in the response body, Route 53 considers the resource healthy.
* Route 53 considers case when searching for `SearchString` in the response body.
*/
@JvmName("enxngrpxdrtsvpxn")
public suspend fun searchString(`value`: Output) {
this.searchString = value
}
/**
* @param value The type of health check that you want to create, which indicates how Amazon Route 53 determines whether an endpoint is healthy.
* > You can't change the value of `Type` after you create a health check.
* You can create the following types of health checks:
* - *HTTP* : Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTP request and waits for an HTTP status code of 200 or greater and less than 400.
* - *HTTPS* : Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTPS request and waits for an HTTP status code of 200 or greater and less than 400.
* > If you specify `HTTPS` for the value of `Type` , the endpoint must support TLS v1.0 or later.
* - *HTTP_STR_MATCH* : Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTP request and searches the first 5,120 bytes of the response body for the string that you specify in `SearchString` .
* - *HTTPS_STR_MATCH* : Route 53 tries to establish a TCP connection. If successful, Route 53 submits an `HTTPS` request and searches the first 5,120 bytes of the response body for the string that you specify in `SearchString` .
* - *TCP* : Route 53 tries to establish a TCP connection.
* - *CLOUDWATCH_METRIC* : The health check is associated with a CloudWatch alarm. If the state of the alarm is `OK` , the health check is considered healthy. If the state is `ALARM` , the health check is considered unhealthy. If CloudWatch doesn't have sufficient data to determine whether the state is `OK` or `ALARM` , the health check status depends on the setting for `InsufficientDataHealthStatus` : `Healthy` , `Unhealthy` , or `LastKnownStatus` .
* > Route 53 supports CloudWatch alarms with the following features:
* >
* > - Standard-resolution metrics. High-resolution metrics aren't supported. For more information, see [High-Resolution Metrics](https://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/publishingMetrics.html#high-resolution-metrics) in the *Amazon CloudWatch User Guide* .
* > - Statistics: Average, Minimum, Maximum, Sum, and SampleCount. Extended statistics aren't supported.
* - *CALCULATED* : For health checks that monitor the status of other health checks, Route 53 adds up the number of health checks that Route 53 health checkers consider to be healthy and compares that number with the value of `HealthThreshold` .
* - *RECOVERY_CONTROL* : The health check is assocated with a Route53 Application Recovery Controller routing control. If the routing control state is `ON` , the health check is considered healthy. If the state is `OFF` , the health check is considered unhealthy.
* For more information, see [How Route 53 Determines Whether an Endpoint Is Healthy](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html) in the *Amazon Route 53 Developer Guide* .
*/
@JvmName("mrqfklotqmkxpoen")
public suspend fun type(`value`: Output) {
this.type = value
}
/**
* @param value A complex type that identifies the CloudWatch alarm that you want Amazon Route 53 health checkers to use to determine whether the specified health check is healthy.
*/
@JvmName("blvwcwdroxoaogsc")
public suspend fun alarmIdentifier(`value`: HealthCheckAlarmIdentifierArgs?) {
val toBeMapped = value
val mapped = toBeMapped?.let({ args0 -> of(args0) })
this.alarmIdentifier = mapped
}
/**
* @param argument A complex type that identifies the CloudWatch alarm that you want Amazon Route 53 health checkers to use to determine whether the specified health check is healthy.
*/
@JvmName("ctchrlahjabgkcgh")
public suspend fun alarmIdentifier(argument: suspend HealthCheckAlarmIdentifierArgsBuilder.() -> Unit) {
val toBeMapped = HealthCheckAlarmIdentifierArgsBuilder().applySuspend { argument() }.build()
val mapped = of(toBeMapped)
this.alarmIdentifier = mapped
}
/**
* @param value (CALCULATED Health Checks Only) A complex type that contains one `ChildHealthCheck` element for each health check that you want to associate with a `CALCULATED` health check.
*/
@JvmName("tkgqldawvibmgpfh")
public suspend fun childHealthChecks(`value`: List?) {
val toBeMapped = value
val mapped = toBeMapped?.let({ args0 -> of(args0) })
this.childHealthChecks = mapped
}
/**
* @param values (CALCULATED Health Checks Only) A complex type that contains one `ChildHealthCheck` element for each health check that you want to associate with a `CALCULATED` health check.
*/
@JvmName("nlatvliyllvqxhxk")
public suspend fun childHealthChecks(vararg values: String) {
val toBeMapped = values.toList()
val mapped = toBeMapped.let({ args0 -> of(args0) })
this.childHealthChecks = mapped
}
/**
* @param value Specify whether you want Amazon Route 53 to send the value of `FullyQualifiedDomainName` to the endpoint in the `client_hello` message during TLS negotiation. This allows the endpoint to respond to `HTTPS` health check requests with the applicable SSL/TLS certificate.
* Some endpoints require that `HTTPS` requests include the host name in the `client_hello` message. If you don't enable SNI, the status of the health check will be `SSL alert handshake_failure` . A health check can also have that status for other reasons. If SNI is enabled and you're still getting the error, check the SSL/TLS configuration on your endpoint and confirm that your certificate is valid.
* The SSL/TLS certificate on your endpoint includes a domain name in the `Common Name` field and possibly several more in the `Subject Alternative Names` field. One of the domain names in the certificate should match the value that you specify for `FullyQualifiedDomainName` . If the endpoint responds to the `client_hello` message with a certificate that does not include the domain name that you specified in `FullyQualifiedDomainName` , a health checker will retry the handshake. In the second attempt, the health checker will omit `FullyQualifiedDomainName` from the `client_hello` message.
*/
@JvmName("qavshsvoexsfyjgf")
public suspend fun enableSni(`value`: Boolean?) {
val toBeMapped = value
val mapped = toBeMapped?.let({ args0 -> of(args0) })
this.enableSni = mapped
}
/**
* @param value The number of consecutive health checks that an endpoint must pass or fail for Amazon Route 53 to change the current status of the endpoint from unhealthy to healthy or vice versa. For more information, see [How Amazon Route 53 Determines Whether an Endpoint Is Healthy](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html) in the *Amazon Route 53 Developer Guide* .
* If you don't specify a value for `FailureThreshold` , the default value is three health checks.
*/
@JvmName("lsoapramcnchhaya")
public suspend fun failureThreshold(`value`: Int?) {
val toBeMapped = value
val mapped = toBeMapped?.let({ args0 -> of(args0) })
this.failureThreshold = mapped
}
/**
* @param value Amazon Route 53 behavior depends on whether you specify a value for `IPAddress` .
* *If you specify a value for* `IPAddress` :
* Amazon Route 53 sends health check requests to the specified IPv4 or IPv6 address and passes the value of `FullyQualifiedDomainName` in the `Host` header for all health checks except TCP health checks. This is typically the fully qualified DNS name of the endpoint on which you want Route 53 to perform health checks.
* When Route 53 checks the health of an endpoint, here is how it constructs the `Host` header:
* - If you specify a value of `80` for `Port` and `HTTP` or `HTTP_STR_MATCH` for `Type` , Route 53 passes the value of `FullyQualifiedDomainName` to the endpoint in the Host header.
* - If you specify a value of `443` for `Port` and `HTTPS` or `HTTPS_STR_MATCH` for `Type` , Route 53 passes the value of `FullyQualifiedDomainName` to the endpoint in the `Host` header.
* - If you specify another value for `Port` and any value except `TCP` for `Type` , Route 53 passes `FullyQualifiedDomainName:Port` to the endpoint in the `Host` header.
* If you don't specify a value for `FullyQualifiedDomainName` , Route 53 substitutes the value of `IPAddress` in the `Host` header in each of the preceding cases.
* *If you don't specify a value for `IPAddress`* :
* Route 53 sends a DNS request to the domain that you specify for `FullyQualifiedDomainName` at the interval that you specify for `RequestInterval` . Using an IPv4 address that DNS returns, Route 53 then checks the health of the endpoint.
* > If you don't specify a value for `IPAddress` , Route 53 uses only IPv4 to send health checks to the endpoint. If there's no record with a type of A for the name that you specify for `FullyQualifiedDomainName` , the health check fails with a "DNS resolution failed" error.
* If you want to check the health of multiple records that have the same name and type, such as multiple weighted records, and if you choose to specify the endpoint only by `FullyQualifiedDomainName` , we recommend that you create a separate health check for each endpoint. For example, create a health check for each HTTP server that is serving content for www.example.com. For the value of `FullyQualifiedDomainName` , specify the domain name of the server (such as us-east-2-www.example.com), not the name of the records (www.example.com).
* > In this configuration, if you create a health check for which the value of `FullyQualifiedDomainName` matches the name of the records and you then associate the health check with those records, health check results will be unpredictable.
* In addition, if the value that you specify for `Type` is `HTTP` , `HTTPS` , `HTTP_STR_MATCH` , or `HTTPS_STR_MATCH` , Route 53 passes the value of `FullyQualifiedDomainName` in the `Host` header, as it does when you specify a value for `IPAddress` . If the value of `Type` is `TCP` , Route 53 doesn't pass a `Host` header.
*/
@JvmName("kxigmesuywfjmhce")
public suspend fun fullyQualifiedDomainName(`value`: String?) {
val toBeMapped = value
val mapped = toBeMapped?.let({ args0 -> of(args0) })
this.fullyQualifiedDomainName = mapped
}
/**
* @param value The number of child health checks that are associated with a `CALCULATED` health check that Amazon Route 53 must consider healthy for the `CALCULATED` health check to be considered healthy. To specify the child health checks that you want to associate with a `CALCULATED` health check, use the [ChildHealthChecks](https://docs.aws.amazon.com/Route53/latest/APIReference/API_UpdateHealthCheck.html#Route53-UpdateHealthCheck-request-ChildHealthChecks) element.
* Note the following:
* - If you specify a number greater than the number of child health checks, Route 53 always considers this health check to be unhealthy.
* - If you specify `0` , Route 53 always considers this health check to be healthy.
*/
@JvmName("ejskxlpfmwkdjili")
public suspend fun healthThreshold(`value`: Int?) {
val toBeMapped = value
val mapped = toBeMapped?.let({ args0 -> of(args0) })
this.healthThreshold = mapped
}
/**
* @param value When CloudWatch has insufficient data about the metric to determine the alarm state, the status that you want Amazon Route 53 to assign to the health check:
* - `Healthy` : Route 53 considers the health check to be healthy.
* - `Unhealthy` : Route 53 considers the health check to be unhealthy.
* - `LastKnownStatus` : Route 53 uses the status of the health check from the last time that CloudWatch had sufficient data to determine the alarm state. For new health checks that have no last known status, the default status for the health check is healthy.
*/
@JvmName("hinsvdwmibortely")
public suspend fun insufficientDataHealthStatus(`value`: HealthCheckConfigPropertiesInsufficientDataHealthStatus?) {
val toBeMapped = value
val mapped = toBeMapped?.let({ args0 -> of(args0) })
this.insufficientDataHealthStatus = mapped
}
/**
* @param value Specify whether you want Amazon Route 53 to invert the status of a health check, for example, to consider a health check unhealthy when it otherwise would be considered healthy.
*/
@JvmName("unkokaylnkqxfiwi")
public suspend fun inverted(`value`: Boolean?) {
val toBeMapped = value
val mapped = toBeMapped?.let({ args0 -> of(args0) })
this.inverted = mapped
}
/**
* @param value The IPv4 or IPv6 IP address of the endpoint that you want Amazon Route 53 to perform health checks on. If you don't specify a value for `IPAddress` , Route 53 sends a DNS request to resolve the domain name that you specify in `FullyQualifiedDomainName` at the interval that you specify in `RequestInterval` . Using an IP address returned by DNS, Route 53 then checks the health of the endpoint.
* Use one of the following formats for the value of `IPAddress` :
* - *IPv4 address* : four values between 0 and 255, separated by periods (.), for example, `192.0.2.44` .
* - *IPv6 address* : eight groups of four hexadecimal values, separated by colons (:), for example, `2001:0db8:85a3:0000:0000:abcd:0001:2345` . You can also shorten IPv6 addresses as described in RFC 5952, for example, `2001:db8:85a3::abcd:1:2345` .
* If the endpoint is an EC2 instance, we recommend that you create an Elastic IP address, associate it with your EC2 instance, and specify the Elastic IP address for `IPAddress` . This ensures that the IP address of your instance will never change.
* For more information, see [FullyQualifiedDomainName](https://docs.aws.amazon.com/Route53/latest/APIReference/API_UpdateHealthCheck.html#Route53-UpdateHealthCheck-request-FullyQualifiedDomainName) .
* Constraints: Route 53 can't check the health of endpoints for which the IP address is in local, private, non-routable, or multicast ranges. For more information about IP addresses for which you can't create health checks, see the following documents:
* - [RFC 5735, Special Use IPv4 Addresses](https://docs.aws.amazon.com/https://tools.ietf.org/html/rfc5735)
* - [RFC 6598, IANA-Reserved IPv4 Prefix for Shared Address Space](https://docs.aws.amazon.com/https://tools.ietf.org/html/rfc6598)
* - [RFC 5156, Special-Use IPv6 Addresses](https://docs.aws.amazon.com/https://tools.ietf.org/html/rfc5156)
* When the value of `Type` is `CALCULATED` or `CLOUDWATCH_METRIC` , omit `IPAddress` .
*/
@JvmName("maijfwuhxtxfdtah")
public suspend fun ipAddress(`value`: String?) {
val toBeMapped = value
val mapped = toBeMapped?.let({ args0 -> of(args0) })
this.ipAddress = mapped
}
/**
* @param value Specify whether you want Amazon Route 53 to measure the latency between health checkers in multiple AWS regions and your endpoint, and to display CloudWatch latency graphs on the *Health Checks* page in the Route 53 console.
* > You can't change the value of `MeasureLatency` after you create a health check.
*/
@JvmName("vagttoeoedpeihpl")
public suspend fun measureLatency(`value`: Boolean?) {
val toBeMapped = value
val mapped = toBeMapped?.let({ args0 -> of(args0) })
this.measureLatency = mapped
}
/**
* @param value The port on the endpoint that you want Amazon Route 53 to perform health checks on.
* > Don't specify a value for `Port` when you specify a value for [Type](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-type) of `CLOUDWATCH_METRIC` or `CALCULATED` .
*/
@JvmName("etnfmpvtpmfrjxdv")
public suspend fun port(`value`: Int?) {
val toBeMapped = value
val mapped = toBeMapped?.let({ args0 -> of(args0) })
this.port = mapped
}
/**
* @param value A complex type that contains one `Region` element for each region from which you want Amazon Route 53 health checkers to check the specified endpoint.
* If you don't specify any regions, Route 53 health checkers automatically performs checks from all of the regions that are listed under *Valid Values* .
* If you update a health check to remove a region that has been performing health checks, Route 53 will briefly continue to perform checks from that region to ensure that some health checkers are always checking the endpoint (for example, if you replace three regions with four different regions).
*/
@JvmName("nhwccqkpvmwasxte")
public suspend fun regions(`value`: List?) {
val toBeMapped = value
val mapped = toBeMapped?.let({ args0 -> of(args0) })
this.regions = mapped
}
/**
* @param values A complex type that contains one `Region` element for each region from which you want Amazon Route 53 health checkers to check the specified endpoint.
* If you don't specify any regions, Route 53 health checkers automatically performs checks from all of the regions that are listed under *Valid Values* .
* If you update a health check to remove a region that has been performing health checks, Route 53 will briefly continue to perform checks from that region to ensure that some health checkers are always checking the endpoint (for example, if you replace three regions with four different regions).
*/
@JvmName("qbwgqyibjcnyumfw")
public suspend fun regions(vararg values: String) {
val toBeMapped = values.toList()
val mapped = toBeMapped.let({ args0 -> of(args0) })
this.regions = mapped
}
/**
* @param value The number of seconds between the time that Amazon Route 53 gets a response from your endpoint and the time that it sends the next health check request. Each Route 53 health checker makes requests at this interval.
* > You can't change the value of `RequestInterval` after you create a health check.
* If you don't specify a value for `RequestInterval` , the default value is `30` seconds.
*/
@JvmName("dwbqkyxsmkagjyod")
public suspend fun requestInterval(`value`: Int?) {
val toBeMapped = value
val mapped = toBeMapped?.let({ args0 -> of(args0) })
this.requestInterval = mapped
}
/**
* @param value The path, if any, that you want Amazon Route 53 to request when performing health checks. The path can be any value for which your endpoint will return an HTTP status code of 2xx or 3xx when the endpoint is healthy, for example, the file /docs/route53-health-check.html. You can also include query string parameters, for example, `/welcome.html?language=jp&login=y` .
*/
@JvmName("mbxlauqaoupnkyyg")
public suspend fun resourcePath(`value`: String?) {
val toBeMapped = value
val mapped = toBeMapped?.let({ args0 -> of(args0) })
this.resourcePath = mapped
}
/**
* @param value The Amazon Resource Name (ARN) for the Route 53 Application Recovery Controller routing control.
* For more information about Route 53 Application Recovery Controller, see [Route 53 Application Recovery Controller Developer Guide.](https://docs.aws.amazon.com/r53recovery/latest/dg/what-is-route-53-recovery.html) .
*/
@JvmName("tbpjqtyeujbublnv")
public suspend fun routingControlArn(`value`: String?) {
val toBeMapped = value
val mapped = toBeMapped?.let({ args0 -> of(args0) })
this.routingControlArn = mapped
}
/**
* @param value If the value of Type is `HTTP_STR_MATCH` or `HTTPS_STR_MATCH` , the string that you want Amazon Route 53 to search for in the response body from the specified resource. If the string appears in the response body, Route 53 considers the resource healthy.
* Route 53 considers case when searching for `SearchString` in the response body.
*/
@JvmName("dstovolbvhyjafuc")
public suspend fun searchString(`value`: String?) {
val toBeMapped = value
val mapped = toBeMapped?.let({ args0 -> of(args0) })
this.searchString = mapped
}
/**
* @param value The type of health check that you want to create, which indicates how Amazon Route 53 determines whether an endpoint is healthy.
* > You can't change the value of `Type` after you create a health check.
* You can create the following types of health checks:
* - *HTTP* : Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTP request and waits for an HTTP status code of 200 or greater and less than 400.
* - *HTTPS* : Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTPS request and waits for an HTTP status code of 200 or greater and less than 400.
* > If you specify `HTTPS` for the value of `Type` , the endpoint must support TLS v1.0 or later.
* - *HTTP_STR_MATCH* : Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTP request and searches the first 5,120 bytes of the response body for the string that you specify in `SearchString` .
* - *HTTPS_STR_MATCH* : Route 53 tries to establish a TCP connection. If successful, Route 53 submits an `HTTPS` request and searches the first 5,120 bytes of the response body for the string that you specify in `SearchString` .
* - *TCP* : Route 53 tries to establish a TCP connection.
* - *CLOUDWATCH_METRIC* : The health check is associated with a CloudWatch alarm. If the state of the alarm is `OK` , the health check is considered healthy. If the state is `ALARM` , the health check is considered unhealthy. If CloudWatch doesn't have sufficient data to determine whether the state is `OK` or `ALARM` , the health check status depends on the setting for `InsufficientDataHealthStatus` : `Healthy` , `Unhealthy` , or `LastKnownStatus` .
* > Route 53 supports CloudWatch alarms with the following features:
* >
* > - Standard-resolution metrics. High-resolution metrics aren't supported. For more information, see [High-Resolution Metrics](https://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/publishingMetrics.html#high-resolution-metrics) in the *Amazon CloudWatch User Guide* .
* > - Statistics: Average, Minimum, Maximum, Sum, and SampleCount. Extended statistics aren't supported.
* - *CALCULATED* : For health checks that monitor the status of other health checks, Route 53 adds up the number of health checks that Route 53 health checkers consider to be healthy and compares that number with the value of `HealthThreshold` .
* - *RECOVERY_CONTROL* : The health check is assocated with a Route53 Application Recovery Controller routing control. If the routing control state is `ON` , the health check is considered healthy. If the state is `OFF` , the health check is considered unhealthy.
* For more information, see [How Route 53 Determines Whether an Endpoint Is Healthy](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html) in the *Amazon Route 53 Developer Guide* .
*/
@JvmName("cwytnpkrpwfwqnsw")
public suspend fun type(`value`: HealthCheckConfigPropertiesType) {
val toBeMapped = value
val mapped = toBeMapped.let({ args0 -> of(args0) })
this.type = mapped
}
internal fun build(): HealthCheckConfigPropertiesArgs = HealthCheckConfigPropertiesArgs(
alarmIdentifier = alarmIdentifier,
childHealthChecks = childHealthChecks,
enableSni = enableSni,
failureThreshold = failureThreshold,
fullyQualifiedDomainName = fullyQualifiedDomainName,
healthThreshold = healthThreshold,
insufficientDataHealthStatus = insufficientDataHealthStatus,
inverted = inverted,
ipAddress = ipAddress,
measureLatency = measureLatency,
port = port,
regions = regions,
requestInterval = requestInterval,
resourcePath = resourcePath,
routingControlArn = routingControlArn,
searchString = searchString,
type = type ?: throw PulumiNullFieldException("type"),
)
}