org.mozilla.javascript.Scriptable Maven / Gradle / Ivy
Show all versions of js Show documentation
/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Rhino code, released
* May 6, 1999.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1997-1999
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Norris Boyd
*
* Alternatively, the contents of this file may be used under the terms of
* the GNU General Public License Version 2 or later (the "GPL"), in which
* case the provisions of the GPL are applicable instead of those above. If
* you wish to allow use of your version of this file only under the terms of
* the GPL and not to allow others to use your version of this file under the
* MPL, indicate your decision by deleting the provisions above and replacing
* them with the notice and other provisions required by the GPL. If you do
* not delete the provisions above, a recipient may use your version of this
* file under either the MPL or the GPL.
*
* ***** END LICENSE BLOCK ***** */
// API class
package org.mozilla.javascript;
/**
* This is interface that all objects in JavaScript must implement.
* The interface provides for the management of properties and for
* performing conversions.
*
* Host system implementors may find it easier to extend the ScriptableObject
* class rather than implementing Scriptable when writing host objects.
*
* There are many static methods defined in ScriptableObject that perform
* the multiple calls to the Scriptable interface needed in order to
* manipulate properties in prototype chains.
*
*
* @see org.mozilla.javascript.ScriptableObject
* @author Norris Boyd
* @author Nick Thompson
* @author Brendan Eich
*/
public interface Scriptable {
/**
* Get the name of the set of objects implemented by this Java class.
* This corresponds to the [[Class]] operation in ECMA and is used
* by Object.prototype.toString() in ECMA.
* See ECMA 8.6.2 and 15.2.4.2.
*/
public String getClassName();
/**
* Value returned from get if the property is not
* found.
*/
public static final Object NOT_FOUND = UniqueTag.NOT_FOUND;
/**
* Get a named property from the object.
*
* Looks property up in this object and returns the associated value
* if found. Returns NOT_FOUND if not found.
* Note that this method is not expected to traverse the prototype
* chain. This is different from the ECMA [[Get]] operation.
*
* Depending on the property selector, the runtime will call
* this method or the form of get that takes an
* integer:
*
* JavaScript code Java code a.b a.get("b", a) a["foo"] a.get("foo", a) a[3] a.get(3, a) a["3"] a.get(3, a) a[3.0] a.get(3, a) a["3.0"] a.get("3.0", a) a[1.1] a.get("1.1", a) a[-4] a.get(-4, a)
*
* The values that may be returned are limited to the following:
*
* - java.lang.Boolean objects
* - java.lang.String objects
* - java.lang.Number objects
* - org.mozilla.javascript.Scriptable objects
* - null
* - The value returned by Context.getUndefinedValue()
* - NOT_FOUND
*
* @param name the name of the property
* @param start the object in which the lookup began
* @return the value of the property (may be null), or NOT_FOUND
* @see org.mozilla.javascript.Context#getUndefinedValue
*/
public Object get(String name, Scriptable start);
/**
* Get a property from the object selected by an integral index.
*
* Identical to get(String, Scriptable) except that
* an integral index is used to select the property.
*
* @param index the numeric index for the property
* @param start the object in which the lookup began
* @return the value of the property (may be null), or NOT_FOUND
* @see org.mozilla.javascript.Scriptable#get(String,Scriptable)
*/
public Object get(int index, Scriptable start);
/**
* Indicates whether or not a named property is defined in an object.
*
* Does not traverse the prototype chain.
*
* The property is specified by a String name
* as defined for the get method.
*
* @param name the name of the property
* @param start the object in which the lookup began
* @return true if and only if the named property is found in the object
* @see org.mozilla.javascript.Scriptable#get(String, Scriptable)
* @see org.mozilla.javascript.ScriptableObject#getProperty(Scriptable, String)
*/
public boolean has(String name, Scriptable start);
/**
* Indicates whether or not an indexed property is defined in an object.
*
* Does not traverse the prototype chain.
*
* The property is specified by an integral index
* as defined for the get method.
*
* @param index the numeric index for the property
* @param start the object in which the lookup began
* @return true if and only if the indexed property is found in the object
* @see org.mozilla.javascript.Scriptable#get(int, Scriptable)
* @see org.mozilla.javascript.ScriptableObject#getProperty(Scriptable, int)
*/
public boolean has(int index, Scriptable start);
/**
* Sets a named property in this object.
*
* The property is specified by a string name
* as defined for get.
*
* The possible values that may be passed in are as defined for
* get. A class that implements this method may choose
* to ignore calls to set certain properties, in which case those
* properties are effectively read-only.
* For properties defined in a prototype chain,
* use putProperty in ScriptableObject.
* Note that if a property a is defined in the prototype p
* of an object o, then evaluating o.a = 23 will cause
* set to be called on the prototype p with
* o as the start parameter.
* To preserve JavaScript semantics, it is the Scriptable
* object's responsibility to modify o.
* This design allows properties to be defined in prototypes and implemented
* in terms of getters and setters of Java values without consuming slots
* in each instance.
*
* The values that may be set are limited to the following:
*
* - java.lang.Boolean objects
* - java.lang.String objects
* - java.lang.Number objects
* - org.mozilla.javascript.Scriptable objects
* - null
* - The value returned by Context.getUndefinedValue()
*
* Arbitrary Java objects may be wrapped in a Scriptable by first calling
* Context.toObject. This allows the property of a JavaScript
* object to contain an arbitrary Java object as a value.
* Note that has will be called by the runtime first before
* set is called to determine in which object the
* property is defined.
* Note that this method is not expected to traverse the prototype chain,
* which is different from the ECMA [[Put]] operation.
* @param name the name of the property
* @param start the object whose property is being set
* @param value value to set the property to
* @see org.mozilla.javascript.Scriptable#has(String, Scriptable)
* @see org.mozilla.javascript.Scriptable#get(String, Scriptable)
* @see org.mozilla.javascript.ScriptableObject#putProperty(Scriptable, String, Object)
* @see org.mozilla.javascript.Context#toObject(Object, Scriptable)
*/
public void put(String name, Scriptable start, Object value);
/**
* Sets an indexed property in this object.
*
* The property is specified by an integral index
* as defined for get.
*
* Identical to put(String, Scriptable, Object) except that
* an integral index is used to select the property.
*
* @param index the numeric index for the property
* @param start the object whose property is being set
* @param value value to set the property to
* @see org.mozilla.javascript.Scriptable#has(int, Scriptable)
* @see org.mozilla.javascript.Scriptable#get(int, Scriptable)
* @see org.mozilla.javascript.ScriptableObject#putProperty(Scriptable, int, Object)
* @see org.mozilla.javascript.Context#toObject(Object, Scriptable)
*/
public void put(int index, Scriptable start, Object value);
/**
* Removes a property from this object.
* This operation corresponds to the ECMA [[Delete]] except that
* the no result is returned. The runtime will guarantee that this
* method is called only if the property exists. After this method
* is called, the runtime will call Scriptable.has to see if the
* property has been removed in order to determine the boolean
* result of the delete operator as defined by ECMA 11.4.1.
*
* A property can be made permanent by ignoring calls to remove
* it.
* The property is specified by a String name
* as defined for get.
*
* To delete properties defined in a prototype chain,
* see deleteProperty in ScriptableObject.
* @param name the identifier for the property
* @see org.mozilla.javascript.Scriptable#get(String, Scriptable)
* @see org.mozilla.javascript.ScriptableObject#deleteProperty(Scriptable, String)
*/
public void delete(String name);
/**
* Removes a property from this object.
*
* The property is specified by an integral index
* as defined for get.
*
* To delete properties defined in a prototype chain,
* see deleteProperty in ScriptableObject.
*
* Identical to delete(String) except that
* an integral index is used to select the property.
*
* @param index the numeric index for the property
* @see org.mozilla.javascript.Scriptable#get(int, Scriptable)
* @see org.mozilla.javascript.ScriptableObject#deleteProperty(Scriptable, int)
*/
public void delete(int index);
/**
* Get the prototype of the object.
* @return the prototype
*/
public Scriptable getPrototype();
/**
* Set the prototype of the object.
* @param prototype the prototype to set
*/
public void setPrototype(Scriptable prototype);
/**
* Get the parent scope of the object.
* @return the parent scope
*/
public Scriptable getParentScope();
/**
* Set the parent scope of the object.
* @param parent the parent scope to set
*/
public void setParentScope(Scriptable parent);
/**
* Get an array of property ids.
*
* Not all property ids need be returned. Those properties
* whose ids are not returned are considered non-enumerable.
*
* @return an array of Objects. Each entry in the array is either
* a java.lang.String or a java.lang.Number
*/
public Object[] getIds();
/**
* Get the default value of the object with a given hint.
* The hints are String.class for type String, Number.class for type
* Number, Scriptable.class for type Object, and Boolean.class for
* type Boolean.
*
* A hint of null means "no hint".
*
* See ECMA 8.6.2.6.
*
* @param hint the type hint
* @return the default value
*/
public Object getDefaultValue(Class hint);
/**
* The instanceof operator.
*
*
* The JavaScript code "lhs instanceof rhs" causes rhs.hasInstance(lhs) to
* be called.
*
*
* The return value is implementation dependent so that embedded host objects can
* return an appropriate value. See the JS 1.3 language documentation for more
* detail.
*
*
This operator corresponds to the proposed EMCA [[HasInstance]] operator.
*
* @param instance The value that appeared on the LHS of the instanceof
* operator
*
* @return an implementation dependent value
*/
public boolean hasInstance(Scriptable instance);
}