software.amazon.awssdk.services.connect.ConnectClient Maven / Gradle / Ivy

Go to download
Show more of this group Show more artifacts with this name
Show all versions of connect Show documentation
The AWS Java SDK for Connect module holds the client classes that are used for communicating with Connect.
There is a newer version: 2.29.15
/*
 * Copyright Amazon.com, Inc. or its affiliates. All Rights Reserved.
 * 
 * Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with
 * the License. A copy of the License is located at
 * 
 * http://aws.amazon.com/apache2.0
 * 
 * or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
 * CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions
 * and limitations under the License.
 */

package software.amazon.awssdk.services.connect;

import java.util.function.Consumer;
import software.amazon.awssdk.annotations.Generated;
import software.amazon.awssdk.annotations.SdkPublicApi;
import software.amazon.awssdk.annotations.ThreadSafe;
import software.amazon.awssdk.awscore.AwsClient;
import software.amazon.awssdk.awscore.exception.AwsServiceException;
import software.amazon.awssdk.core.exception.SdkClientException;
import software.amazon.awssdk.regions.ServiceMetadata;
import software.amazon.awssdk.services.connect.model.AccessDeniedException;
import software.amazon.awssdk.services.connect.model.ActivateEvaluationFormRequest;
import software.amazon.awssdk.services.connect.model.ActivateEvaluationFormResponse;
import software.amazon.awssdk.services.connect.model.AssociateAnalyticsDataSetRequest;
import software.amazon.awssdk.services.connect.model.AssociateAnalyticsDataSetResponse;
import software.amazon.awssdk.services.connect.model.AssociateApprovedOriginRequest;
import software.amazon.awssdk.services.connect.model.AssociateApprovedOriginResponse;
import software.amazon.awssdk.services.connect.model.AssociateBotRequest;
import software.amazon.awssdk.services.connect.model.AssociateBotResponse;
import software.amazon.awssdk.services.connect.model.AssociateDefaultVocabularyRequest;
import software.amazon.awssdk.services.connect.model.AssociateDefaultVocabularyResponse;
import software.amazon.awssdk.services.connect.model.AssociateFlowRequest;
import software.amazon.awssdk.services.connect.model.AssociateFlowResponse;
import software.amazon.awssdk.services.connect.model.AssociateInstanceStorageConfigRequest;
import software.amazon.awssdk.services.connect.model.AssociateInstanceStorageConfigResponse;
import software.amazon.awssdk.services.connect.model.AssociateLambdaFunctionRequest;
import software.amazon.awssdk.services.connect.model.AssociateLambdaFunctionResponse;
import software.amazon.awssdk.services.connect.model.AssociateLexBotRequest;
import software.amazon.awssdk.services.connect.model.AssociateLexBotResponse;
import software.amazon.awssdk.services.connect.model.AssociatePhoneNumberContactFlowRequest;
import software.amazon.awssdk.services.connect.model.AssociatePhoneNumberContactFlowResponse;
import software.amazon.awssdk.services.connect.model.AssociateQueueQuickConnectsRequest;
import software.amazon.awssdk.services.connect.model.AssociateQueueQuickConnectsResponse;
import software.amazon.awssdk.services.connect.model.AssociateRoutingProfileQueuesRequest;
import software.amazon.awssdk.services.connect.model.AssociateRoutingProfileQueuesResponse;
import software.amazon.awssdk.services.connect.model.AssociateSecurityKeyRequest;
import software.amazon.awssdk.services.connect.model.AssociateSecurityKeyResponse;
import software.amazon.awssdk.services.connect.model.AssociateTrafficDistributionGroupUserRequest;
import software.amazon.awssdk.services.connect.model.AssociateTrafficDistributionGroupUserResponse;
import software.amazon.awssdk.services.connect.model.AssociateUserProficienciesRequest;
import software.amazon.awssdk.services.connect.model.AssociateUserProficienciesResponse;
import software.amazon.awssdk.services.connect.model.BatchAssociateAnalyticsDataSetRequest;
import software.amazon.awssdk.services.connect.model.BatchAssociateAnalyticsDataSetResponse;
import software.amazon.awssdk.services.connect.model.BatchDisassociateAnalyticsDataSetRequest;
import software.amazon.awssdk.services.connect.model.BatchDisassociateAnalyticsDataSetResponse;
import software.amazon.awssdk.services.connect.model.BatchGetAttachedFileMetadataRequest;
import software.amazon.awssdk.services.connect.model.BatchGetAttachedFileMetadataResponse;
import software.amazon.awssdk.services.connect.model.BatchGetFlowAssociationRequest;
import software.amazon.awssdk.services.connect.model.BatchGetFlowAssociationResponse;
import software.amazon.awssdk.services.connect.model.BatchPutContactRequest;
import software.amazon.awssdk.services.connect.model.BatchPutContactResponse;
import software.amazon.awssdk.services.connect.model.ClaimPhoneNumberRequest;
import software.amazon.awssdk.services.connect.model.ClaimPhoneNumberResponse;
import software.amazon.awssdk.services.connect.model.CompleteAttachedFileUploadRequest;
import software.amazon.awssdk.services.connect.model.CompleteAttachedFileUploadResponse;
import software.amazon.awssdk.services.connect.model.ConflictException;
import software.amazon.awssdk.services.connect.model.ConnectException;
import software.amazon.awssdk.services.connect.model.ContactFlowNotPublishedException;
import software.amazon.awssdk.services.connect.model.ContactNotFoundException;
import software.amazon.awssdk.services.connect.model.CreateAgentStatusRequest;
import software.amazon.awssdk.services.connect.model.CreateAgentStatusResponse;
import software.amazon.awssdk.services.connect.model.CreateContactFlowModuleRequest;
import software.amazon.awssdk.services.connect.model.CreateContactFlowModuleResponse;
import software.amazon.awssdk.services.connect.model.CreateContactFlowRequest;
import software.amazon.awssdk.services.connect.model.CreateContactFlowResponse;
import software.amazon.awssdk.services.connect.model.CreateEvaluationFormRequest;
import software.amazon.awssdk.services.connect.model.CreateEvaluationFormResponse;
import software.amazon.awssdk.services.connect.model.CreateHoursOfOperationRequest;
import software.amazon.awssdk.services.connect.model.CreateHoursOfOperationResponse;
import software.amazon.awssdk.services.connect.model.CreateInstanceRequest;
import software.amazon.awssdk.services.connect.model.CreateInstanceResponse;
import software.amazon.awssdk.services.connect.model.CreateIntegrationAssociationRequest;
import software.amazon.awssdk.services.connect.model.CreateIntegrationAssociationResponse;
import software.amazon.awssdk.services.connect.model.CreateParticipantRequest;
import software.amazon.awssdk.services.connect.model.CreateParticipantResponse;
import software.amazon.awssdk.services.connect.model.CreatePersistentContactAssociationRequest;
import software.amazon.awssdk.services.connect.model.CreatePersistentContactAssociationResponse;
import software.amazon.awssdk.services.connect.model.CreatePredefinedAttributeRequest;
import software.amazon.awssdk.services.connect.model.CreatePredefinedAttributeResponse;
import software.amazon.awssdk.services.connect.model.CreatePromptRequest;
import software.amazon.awssdk.services.connect.model.CreatePromptResponse;
import software.amazon.awssdk.services.connect.model.CreateQueueRequest;
import software.amazon.awssdk.services.connect.model.CreateQueueResponse;
import software.amazon.awssdk.services.connect.model.CreateQuickConnectRequest;
import software.amazon.awssdk.services.connect.model.CreateQuickConnectResponse;
import software.amazon.awssdk.services.connect.model.CreateRoutingProfileRequest;
import software.amazon.awssdk.services.connect.model.CreateRoutingProfileResponse;
import software.amazon.awssdk.services.connect.model.CreateRuleRequest;
import software.amazon.awssdk.services.connect.model.CreateRuleResponse;
import software.amazon.awssdk.services.connect.model.CreateSecurityProfileRequest;
import software.amazon.awssdk.services.connect.model.CreateSecurityProfileResponse;
import software.amazon.awssdk.services.connect.model.CreateTaskTemplateRequest;
import software.amazon.awssdk.services.connect.model.CreateTaskTemplateResponse;
import software.amazon.awssdk.services.connect.model.CreateTrafficDistributionGroupRequest;
import software.amazon.awssdk.services.connect.model.CreateTrafficDistributionGroupResponse;
import software.amazon.awssdk.services.connect.model.CreateUseCaseRequest;
import software.amazon.awssdk.services.connect.model.CreateUseCaseResponse;
import software.amazon.awssdk.services.connect.model.CreateUserHierarchyGroupRequest;
import software.amazon.awssdk.services.connect.model.CreateUserHierarchyGroupResponse;
import software.amazon.awssdk.services.connect.model.CreateUserRequest;
import software.amazon.awssdk.services.connect.model.CreateUserResponse;
import software.amazon.awssdk.services.connect.model.CreateViewRequest;
import software.amazon.awssdk.services.connect.model.CreateViewResponse;
import software.amazon.awssdk.services.connect.model.CreateViewVersionRequest;
import software.amazon.awssdk.services.connect.model.CreateViewVersionResponse;
import software.amazon.awssdk.services.connect.model.CreateVocabularyRequest;
import software.amazon.awssdk.services.connect.model.CreateVocabularyResponse;
import software.amazon.awssdk.services.connect.model.DeactivateEvaluationFormRequest;
import software.amazon.awssdk.services.connect.model.DeactivateEvaluationFormResponse;
import software.amazon.awssdk.services.connect.model.DeleteAttachedFileRequest;
import software.amazon.awssdk.services.connect.model.DeleteAttachedFileResponse;
import software.amazon.awssdk.services.connect.model.DeleteContactEvaluationRequest;
import software.amazon.awssdk.services.connect.model.DeleteContactEvaluationResponse;
import software.amazon.awssdk.services.connect.model.DeleteContactFlowModuleRequest;
import software.amazon.awssdk.services.connect.model.DeleteContactFlowModuleResponse;
import software.amazon.awssdk.services.connect.model.DeleteContactFlowRequest;
import software.amazon.awssdk.services.connect.model.DeleteContactFlowResponse;
import software.amazon.awssdk.services.connect.model.DeleteEvaluationFormRequest;
import software.amazon.awssdk.services.connect.model.DeleteEvaluationFormResponse;
import software.amazon.awssdk.services.connect.model.DeleteHoursOfOperationRequest;
import software.amazon.awssdk.services.connect.model.DeleteHoursOfOperationResponse;
import software.amazon.awssdk.services.connect.model.DeleteInstanceRequest;
import software.amazon.awssdk.services.connect.model.DeleteInstanceResponse;
import software.amazon.awssdk.services.connect.model.DeleteIntegrationAssociationRequest;
import software.amazon.awssdk.services.connect.model.DeleteIntegrationAssociationResponse;
import software.amazon.awssdk.services.connect.model.DeletePredefinedAttributeRequest;
import software.amazon.awssdk.services.connect.model.DeletePredefinedAttributeResponse;
import software.amazon.awssdk.services.connect.model.DeletePromptRequest;
import software.amazon.awssdk.services.connect.model.DeletePromptResponse;
import software.amazon.awssdk.services.connect.model.DeleteQueueRequest;
import software.amazon.awssdk.services.connect.model.DeleteQueueResponse;
import software.amazon.awssdk.services.connect.model.DeleteQuickConnectRequest;
import software.amazon.awssdk.services.connect.model.DeleteQuickConnectResponse;
import software.amazon.awssdk.services.connect.model.DeleteRoutingProfileRequest;
import software.amazon.awssdk.services.connect.model.DeleteRoutingProfileResponse;
import software.amazon.awssdk.services.connect.model.DeleteRuleRequest;
import software.amazon.awssdk.services.connect.model.DeleteRuleResponse;
import software.amazon.awssdk.services.connect.model.DeleteSecurityProfileRequest;
import software.amazon.awssdk.services.connect.model.DeleteSecurityProfileResponse;
import software.amazon.awssdk.services.connect.model.DeleteTaskTemplateRequest;
import software.amazon.awssdk.services.connect.model.DeleteTaskTemplateResponse;
import software.amazon.awssdk.services.connect.model.DeleteTrafficDistributionGroupRequest;
import software.amazon.awssdk.services.connect.model.DeleteTrafficDistributionGroupResponse;
import software.amazon.awssdk.services.connect.model.DeleteUseCaseRequest;
import software.amazon.awssdk.services.connect.model.DeleteUseCaseResponse;
import software.amazon.awssdk.services.connect.model.DeleteUserHierarchyGroupRequest;
import software.amazon.awssdk.services.connect.model.DeleteUserHierarchyGroupResponse;
import software.amazon.awssdk.services.connect.model.DeleteUserRequest;
import software.amazon.awssdk.services.connect.model.DeleteUserResponse;
import software.amazon.awssdk.services.connect.model.DeleteViewRequest;
import software.amazon.awssdk.services.connect.model.DeleteViewResponse;
import software.amazon.awssdk.services.connect.model.DeleteViewVersionRequest;
import software.amazon.awssdk.services.connect.model.DeleteViewVersionResponse;
import software.amazon.awssdk.services.connect.model.DeleteVocabularyRequest;
import software.amazon.awssdk.services.connect.model.DeleteVocabularyResponse;
import software.amazon.awssdk.services.connect.model.DescribeAgentStatusRequest;
import software.amazon.awssdk.services.connect.model.DescribeAgentStatusResponse;
import software.amazon.awssdk.services.connect.model.DescribeAuthenticationProfileRequest;
import software.amazon.awssdk.services.connect.model.DescribeAuthenticationProfileResponse;
import software.amazon.awssdk.services.connect.model.DescribeContactEvaluationRequest;
import software.amazon.awssdk.services.connect.model.DescribeContactEvaluationResponse;
import software.amazon.awssdk.services.connect.model.DescribeContactFlowModuleRequest;
import software.amazon.awssdk.services.connect.model.DescribeContactFlowModuleResponse;
import software.amazon.awssdk.services.connect.model.DescribeContactFlowRequest;
import software.amazon.awssdk.services.connect.model.DescribeContactFlowResponse;
import software.amazon.awssdk.services.connect.model.DescribeContactRequest;
import software.amazon.awssdk.services.connect.model.DescribeContactResponse;
import software.amazon.awssdk.services.connect.model.DescribeEvaluationFormRequest;
import software.amazon.awssdk.services.connect.model.DescribeEvaluationFormResponse;
import software.amazon.awssdk.services.connect.model.DescribeHoursOfOperationRequest;
import software.amazon.awssdk.services.connect.model.DescribeHoursOfOperationResponse;
import software.amazon.awssdk.services.connect.model.DescribeInstanceAttributeRequest;
import software.amazon.awssdk.services.connect.model.DescribeInstanceAttributeResponse;
import software.amazon.awssdk.services.connect.model.DescribeInstanceRequest;
import software.amazon.awssdk.services.connect.model.DescribeInstanceResponse;
import software.amazon.awssdk.services.connect.model.DescribeInstanceStorageConfigRequest;
import software.amazon.awssdk.services.connect.model.DescribeInstanceStorageConfigResponse;
import software.amazon.awssdk.services.connect.model.DescribePhoneNumberRequest;
import software.amazon.awssdk.services.connect.model.DescribePhoneNumberResponse;
import software.amazon.awssdk.services.connect.model.DescribePredefinedAttributeRequest;
import software.amazon.awssdk.services.connect.model.DescribePredefinedAttributeResponse;
import software.amazon.awssdk.services.connect.model.DescribePromptRequest;
import software.amazon.awssdk.services.connect.model.DescribePromptResponse;
import software.amazon.awssdk.services.connect.model.DescribeQueueRequest;
import software.amazon.awssdk.services.connect.model.DescribeQueueResponse;
import software.amazon.awssdk.services.connect.model.DescribeQuickConnectRequest;
import software.amazon.awssdk.services.connect.model.DescribeQuickConnectResponse;
import software.amazon.awssdk.services.connect.model.DescribeRoutingProfileRequest;
import software.amazon.awssdk.services.connect.model.DescribeRoutingProfileResponse;
import software.amazon.awssdk.services.connect.model.DescribeRuleRequest;
import software.amazon.awssdk.services.connect.model.DescribeRuleResponse;
import software.amazon.awssdk.services.connect.model.DescribeSecurityProfileRequest;
import software.amazon.awssdk.services.connect.model.DescribeSecurityProfileResponse;
import software.amazon.awssdk.services.connect.model.DescribeTrafficDistributionGroupRequest;
import software.amazon.awssdk.services.connect.model.DescribeTrafficDistributionGroupResponse;
import software.amazon.awssdk.services.connect.model.DescribeUserHierarchyGroupRequest;
import software.amazon.awssdk.services.connect.model.DescribeUserHierarchyGroupResponse;
import software.amazon.awssdk.services.connect.model.DescribeUserHierarchyStructureRequest;
import software.amazon.awssdk.services.connect.model.DescribeUserHierarchyStructureResponse;
import software.amazon.awssdk.services.connect.model.DescribeUserRequest;
import software.amazon.awssdk.services.connect.model.DescribeUserResponse;
import software.amazon.awssdk.services.connect.model.DescribeViewRequest;
import software.amazon.awssdk.services.connect.model.DescribeViewResponse;
import software.amazon.awssdk.services.connect.model.DescribeVocabularyRequest;
import software.amazon.awssdk.services.connect.model.DescribeVocabularyResponse;
import software.amazon.awssdk.services.connect.model.DestinationNotAllowedException;
import software.amazon.awssdk.services.connect.model.DisassociateAnalyticsDataSetRequest;
import software.amazon.awssdk.services.connect.model.DisassociateAnalyticsDataSetResponse;
import software.amazon.awssdk.services.connect.model.DisassociateApprovedOriginRequest;
import software.amazon.awssdk.services.connect.model.DisassociateApprovedOriginResponse;
import software.amazon.awssdk.services.connect.model.DisassociateBotRequest;
import software.amazon.awssdk.services.connect.model.DisassociateBotResponse;
import software.amazon.awssdk.services.connect.model.DisassociateFlowRequest;
import software.amazon.awssdk.services.connect.model.DisassociateFlowResponse;
import software.amazon.awssdk.services.connect.model.DisassociateInstanceStorageConfigRequest;
import software.amazon.awssdk.services.connect.model.DisassociateInstanceStorageConfigResponse;
import software.amazon.awssdk.services.connect.model.DisassociateLambdaFunctionRequest;
import software.amazon.awssdk.services.connect.model.DisassociateLambdaFunctionResponse;
import software.amazon.awssdk.services.connect.model.DisassociateLexBotRequest;
import software.amazon.awssdk.services.connect.model.DisassociateLexBotResponse;
import software.amazon.awssdk.services.connect.model.DisassociatePhoneNumberContactFlowRequest;
import software.amazon.awssdk.services.connect.model.DisassociatePhoneNumberContactFlowResponse;
import software.amazon.awssdk.services.connect.model.DisassociateQueueQuickConnectsRequest;
import software.amazon.awssdk.services.connect.model.DisassociateQueueQuickConnectsResponse;
import software.amazon.awssdk.services.connect.model.DisassociateRoutingProfileQueuesRequest;
import software.amazon.awssdk.services.connect.model.DisassociateRoutingProfileQueuesResponse;
import software.amazon.awssdk.services.connect.model.DisassociateSecurityKeyRequest;
import software.amazon.awssdk.services.connect.model.DisassociateSecurityKeyResponse;
import software.amazon.awssdk.services.connect.model.DisassociateTrafficDistributionGroupUserRequest;
import software.amazon.awssdk.services.connect.model.DisassociateTrafficDistributionGroupUserResponse;
import software.amazon.awssdk.services.connect.model.DisassociateUserProficienciesRequest;
import software.amazon.awssdk.services.connect.model.DisassociateUserProficienciesResponse;
import software.amazon.awssdk.services.connect.model.DismissUserContactRequest;
import software.amazon.awssdk.services.connect.model.DismissUserContactResponse;
import software.amazon.awssdk.services.connect.model.DuplicateResourceException;
import software.amazon.awssdk.services.connect.model.GetAttachedFileRequest;
import software.amazon.awssdk.services.connect.model.GetAttachedFileResponse;
import software.amazon.awssdk.services.connect.model.GetContactAttributesRequest;
import software.amazon.awssdk.services.connect.model.GetContactAttributesResponse;
import software.amazon.awssdk.services.connect.model.GetCurrentMetricDataRequest;
import software.amazon.awssdk.services.connect.model.GetCurrentMetricDataResponse;
import software.amazon.awssdk.services.connect.model.GetCurrentUserDataRequest;
import software.amazon.awssdk.services.connect.model.GetCurrentUserDataResponse;
import software.amazon.awssdk.services.connect.model.GetFederationTokenRequest;
import software.amazon.awssdk.services.connect.model.GetFederationTokenResponse;
import software.amazon.awssdk.services.connect.model.GetFlowAssociationRequest;
import software.amazon.awssdk.services.connect.model.GetFlowAssociationResponse;
import software.amazon.awssdk.services.connect.model.GetMetricDataRequest;
import software.amazon.awssdk.services.connect.model.GetMetricDataResponse;
import software.amazon.awssdk.services.connect.model.GetMetricDataV2Request;
import software.amazon.awssdk.services.connect.model.GetMetricDataV2Response;
import software.amazon.awssdk.services.connect.model.GetPromptFileRequest;
import software.amazon.awssdk.services.connect.model.GetPromptFileResponse;
import software.amazon.awssdk.services.connect.model.GetTaskTemplateRequest;
import software.amazon.awssdk.services.connect.model.GetTaskTemplateResponse;
import software.amazon.awssdk.services.connect.model.GetTrafficDistributionRequest;
import software.amazon.awssdk.services.connect.model.GetTrafficDistributionResponse;
import software.amazon.awssdk.services.connect.model.IdempotencyException;
import software.amazon.awssdk.services.connect.model.ImportPhoneNumberRequest;
import software.amazon.awssdk.services.connect.model.ImportPhoneNumberResponse;
import software.amazon.awssdk.services.connect.model.InternalServiceException;
import software.amazon.awssdk.services.connect.model.InvalidContactFlowException;
import software.amazon.awssdk.services.connect.model.InvalidContactFlowModuleException;
import software.amazon.awssdk.services.connect.model.InvalidParameterException;
import software.amazon.awssdk.services.connect.model.InvalidRequestException;
import software.amazon.awssdk.services.connect.model.LimitExceededException;
import software.amazon.awssdk.services.connect.model.ListAgentStatusesRequest;
import software.amazon.awssdk.services.connect.model.ListAgentStatusesResponse;
import software.amazon.awssdk.services.connect.model.ListAnalyticsDataAssociationsRequest;
import software.amazon.awssdk.services.connect.model.ListAnalyticsDataAssociationsResponse;
import software.amazon.awssdk.services.connect.model.ListApprovedOriginsRequest;
import software.amazon.awssdk.services.connect.model.ListApprovedOriginsResponse;
import software.amazon.awssdk.services.connect.model.ListAuthenticationProfilesRequest;
import software.amazon.awssdk.services.connect.model.ListAuthenticationProfilesResponse;
import software.amazon.awssdk.services.connect.model.ListBotsRequest;
import software.amazon.awssdk.services.connect.model.ListBotsResponse;
import software.amazon.awssdk.services.connect.model.ListContactEvaluationsRequest;
import software.amazon.awssdk.services.connect.model.ListContactEvaluationsResponse;
import software.amazon.awssdk.services.connect.model.ListContactFlowModulesRequest;
import software.amazon.awssdk.services.connect.model.ListContactFlowModulesResponse;
import software.amazon.awssdk.services.connect.model.ListContactFlowsRequest;
import software.amazon.awssdk.services.connect.model.ListContactFlowsResponse;
import software.amazon.awssdk.services.connect.model.ListContactReferencesRequest;
import software.amazon.awssdk.services.connect.model.ListContactReferencesResponse;
import software.amazon.awssdk.services.connect.model.ListDefaultVocabulariesRequest;
import software.amazon.awssdk.services.connect.model.ListDefaultVocabulariesResponse;
import software.amazon.awssdk.services.connect.model.ListEvaluationFormVersionsRequest;
import software.amazon.awssdk.services.connect.model.ListEvaluationFormVersionsResponse;
import software.amazon.awssdk.services.connect.model.ListEvaluationFormsRequest;
import software.amazon.awssdk.services.connect.model.ListEvaluationFormsResponse;
import software.amazon.awssdk.services.connect.model.ListFlowAssociationsRequest;
import software.amazon.awssdk.services.connect.model.ListFlowAssociationsResponse;
import software.amazon.awssdk.services.connect.model.ListHoursOfOperationsRequest;
import software.amazon.awssdk.services.connect.model.ListHoursOfOperationsResponse;
import software.amazon.awssdk.services.connect.model.ListInstanceAttributesRequest;
import software.amazon.awssdk.services.connect.model.ListInstanceAttributesResponse;
import software.amazon.awssdk.services.connect.model.ListInstanceStorageConfigsRequest;
import software.amazon.awssdk.services.connect.model.ListInstanceStorageConfigsResponse;
import software.amazon.awssdk.services.connect.model.ListInstancesRequest;
import software.amazon.awssdk.services.connect.model.ListInstancesResponse;
import software.amazon.awssdk.services.connect.model.ListIntegrationAssociationsRequest;
import software.amazon.awssdk.services.connect.model.ListIntegrationAssociationsResponse;
import software.amazon.awssdk.services.connect.model.ListLambdaFunctionsRequest;
import software.amazon.awssdk.services.connect.model.ListLambdaFunctionsResponse;
import software.amazon.awssdk.services.connect.model.ListLexBotsRequest;
import software.amazon.awssdk.services.connect.model.ListLexBotsResponse;
import software.amazon.awssdk.services.connect.model.ListPhoneNumbersRequest;
import software.amazon.awssdk.services.connect.model.ListPhoneNumbersResponse;
import software.amazon.awssdk.services.connect.model.ListPhoneNumbersV2Request;
import software.amazon.awssdk.services.connect.model.ListPhoneNumbersV2Response;
import software.amazon.awssdk.services.connect.model.ListPredefinedAttributesRequest;
import software.amazon.awssdk.services.connect.model.ListPredefinedAttributesResponse;
import software.amazon.awssdk.services.connect.model.ListPromptsRequest;
import software.amazon.awssdk.services.connect.model.ListPromptsResponse;
import software.amazon.awssdk.services.connect.model.ListQueueQuickConnectsRequest;
import software.amazon.awssdk.services.connect.model.ListQueueQuickConnectsResponse;
import software.amazon.awssdk.services.connect.model.ListQueuesRequest;
import software.amazon.awssdk.services.connect.model.ListQueuesResponse;
import software.amazon.awssdk.services.connect.model.ListQuickConnectsRequest;
import software.amazon.awssdk.services.connect.model.ListQuickConnectsResponse;
import software.amazon.awssdk.services.connect.model.ListRealtimeContactAnalysisSegmentsV2Request;
import software.amazon.awssdk.services.connect.model.ListRealtimeContactAnalysisSegmentsV2Response;
import software.amazon.awssdk.services.connect.model.ListRoutingProfileQueuesRequest;
import software.amazon.awssdk.services.connect.model.ListRoutingProfileQueuesResponse;
import software.amazon.awssdk.services.connect.model.ListRoutingProfilesRequest;
import software.amazon.awssdk.services.connect.model.ListRoutingProfilesResponse;
import software.amazon.awssdk.services.connect.model.ListRulesRequest;
import software.amazon.awssdk.services.connect.model.ListRulesResponse;
import software.amazon.awssdk.services.connect.model.ListSecurityKeysRequest;
import software.amazon.awssdk.services.connect.model.ListSecurityKeysResponse;
import software.amazon.awssdk.services.connect.model.ListSecurityProfileApplicationsRequest;
import software.amazon.awssdk.services.connect.model.ListSecurityProfileApplicationsResponse;
import software.amazon.awssdk.services.connect.model.ListSecurityProfilePermissionsRequest;
import software.amazon.awssdk.services.connect.model.ListSecurityProfilePermissionsResponse;
import software.amazon.awssdk.services.connect.model.ListSecurityProfilesRequest;
import software.amazon.awssdk.services.connect.model.ListSecurityProfilesResponse;
import software.amazon.awssdk.services.connect.model.ListTagsForResourceRequest;
import software.amazon.awssdk.services.connect.model.ListTagsForResourceResponse;
import software.amazon.awssdk.services.connect.model.ListTaskTemplatesRequest;
import software.amazon.awssdk.services.connect.model.ListTaskTemplatesResponse;
import software.amazon.awssdk.services.connect.model.ListTrafficDistributionGroupUsersRequest;
import software.amazon.awssdk.services.connect.model.ListTrafficDistributionGroupUsersResponse;
import software.amazon.awssdk.services.connect.model.ListTrafficDistributionGroupsRequest;
import software.amazon.awssdk.services.connect.model.ListTrafficDistributionGroupsResponse;
import software.amazon.awssdk.services.connect.model.ListUseCasesRequest;
import software.amazon.awssdk.services.connect.model.ListUseCasesResponse;
import software.amazon.awssdk.services.connect.model.ListUserHierarchyGroupsRequest;
import software.amazon.awssdk.services.connect.model.ListUserHierarchyGroupsResponse;
import software.amazon.awssdk.services.connect.model.ListUserProficienciesRequest;
import software.amazon.awssdk.services.connect.model.ListUserProficienciesResponse;
import software.amazon.awssdk.services.connect.model.ListUsersRequest;
import software.amazon.awssdk.services.connect.model.ListUsersResponse;
import software.amazon.awssdk.services.connect.model.ListViewVersionsRequest;
import software.amazon.awssdk.services.connect.model.ListViewVersionsResponse;
import software.amazon.awssdk.services.connect.model.ListViewsRequest;
import software.amazon.awssdk.services.connect.model.ListViewsResponse;
import software.amazon.awssdk.services.connect.model.MaximumResultReturnedException;
import software.amazon.awssdk.services.connect.model.MonitorContactRequest;
import software.amazon.awssdk.services.connect.model.MonitorContactResponse;
import software.amazon.awssdk.services.connect.model.OutboundContactNotPermittedException;
import software.amazon.awssdk.services.connect.model.OutputTypeNotFoundException;
import software.amazon.awssdk.services.connect.model.PauseContactRequest;
import software.amazon.awssdk.services.connect.model.PauseContactResponse;
import software.amazon.awssdk.services.connect.model.PropertyValidationException;
import software.amazon.awssdk.services.connect.model.PutUserStatusRequest;
import software.amazon.awssdk.services.connect.model.PutUserStatusResponse;
import software.amazon.awssdk.services.connect.model.ReleasePhoneNumberRequest;
import software.amazon.awssdk.services.connect.model.ReleasePhoneNumberResponse;
import software.amazon.awssdk.services.connect.model.ReplicateInstanceRequest;
import software.amazon.awssdk.services.connect.model.ReplicateInstanceResponse;
import software.amazon.awssdk.services.connect.model.ResourceConflictException;
import software.amazon.awssdk.services.connect.model.ResourceInUseException;
import software.amazon.awssdk.services.connect.model.ResourceNotFoundException;
import software.amazon.awssdk.services.connect.model.ResourceNotReadyException;
import software.amazon.awssdk.services.connect.model.ResumeContactRecordingRequest;
import software.amazon.awssdk.services.connect.model.ResumeContactRecordingResponse;
import software.amazon.awssdk.services.connect.model.ResumeContactRequest;
import software.amazon.awssdk.services.connect.model.ResumeContactResponse;
import software.amazon.awssdk.services.connect.model.SearchAgentStatusesRequest;
import software.amazon.awssdk.services.connect.model.SearchAgentStatusesResponse;
import software.amazon.awssdk.services.connect.model.SearchAvailablePhoneNumbersRequest;
import software.amazon.awssdk.services.connect.model.SearchAvailablePhoneNumbersResponse;
import software.amazon.awssdk.services.connect.model.SearchContactFlowModulesRequest;
import software.amazon.awssdk.services.connect.model.SearchContactFlowModulesResponse;
import software.amazon.awssdk.services.connect.model.SearchContactFlowsRequest;
import software.amazon.awssdk.services.connect.model.SearchContactFlowsResponse;
import software.amazon.awssdk.services.connect.model.SearchContactsRequest;
import software.amazon.awssdk.services.connect.model.SearchContactsResponse;
import software.amazon.awssdk.services.connect.model.SearchHoursOfOperationsRequest;
import software.amazon.awssdk.services.connect.model.SearchHoursOfOperationsResponse;
import software.amazon.awssdk.services.connect.model.SearchPredefinedAttributesRequest;
import software.amazon.awssdk.services.connect.model.SearchPredefinedAttributesResponse;
import software.amazon.awssdk.services.connect.model.SearchPromptsRequest;
import software.amazon.awssdk.services.connect.model.SearchPromptsResponse;
import software.amazon.awssdk.services.connect.model.SearchQueuesRequest;
import software.amazon.awssdk.services.connect.model.SearchQueuesResponse;
import software.amazon.awssdk.services.connect.model.SearchQuickConnectsRequest;
import software.amazon.awssdk.services.connect.model.SearchQuickConnectsResponse;
import software.amazon.awssdk.services.connect.model.SearchResourceTagsRequest;
import software.amazon.awssdk.services.connect.model.SearchResourceTagsResponse;
import software.amazon.awssdk.services.connect.model.SearchRoutingProfilesRequest;
import software.amazon.awssdk.services.connect.model.SearchRoutingProfilesResponse;
import software.amazon.awssdk.services.connect.model.SearchSecurityProfilesRequest;
import software.amazon.awssdk.services.connect.model.SearchSecurityProfilesResponse;
import software.amazon.awssdk.services.connect.model.SearchUserHierarchyGroupsRequest;
import software.amazon.awssdk.services.connect.model.SearchUserHierarchyGroupsResponse;
import software.amazon.awssdk.services.connect.model.SearchUsersRequest;
import software.amazon.awssdk.services.connect.model.SearchUsersResponse;
import software.amazon.awssdk.services.connect.model.SearchVocabulariesRequest;
import software.amazon.awssdk.services.connect.model.SearchVocabulariesResponse;
import software.amazon.awssdk.services.connect.model.SendChatIntegrationEventRequest;
import software.amazon.awssdk.services.connect.model.SendChatIntegrationEventResponse;
import software.amazon.awssdk.services.connect.model.ServiceQuotaExceededException;
import software.amazon.awssdk.services.connect.model.StartAttachedFileUploadRequest;
import software.amazon.awssdk.services.connect.model.StartAttachedFileUploadResponse;
import software.amazon.awssdk.services.connect.model.StartChatContactRequest;
import software.amazon.awssdk.services.connect.model.StartChatContactResponse;
import software.amazon.awssdk.services.connect.model.StartContactEvaluationRequest;
import software.amazon.awssdk.services.connect.model.StartContactEvaluationResponse;
import software.amazon.awssdk.services.connect.model.StartContactRecordingRequest;
import software.amazon.awssdk.services.connect.model.StartContactRecordingResponse;
import software.amazon.awssdk.services.connect.model.StartContactStreamingRequest;
import software.amazon.awssdk.services.connect.model.StartContactStreamingResponse;
import software.amazon.awssdk.services.connect.model.StartOutboundVoiceContactRequest;
import software.amazon.awssdk.services.connect.model.StartOutboundVoiceContactResponse;
import software.amazon.awssdk.services.connect.model.StartTaskContactRequest;
import software.amazon.awssdk.services.connect.model.StartTaskContactResponse;
import software.amazon.awssdk.services.connect.model.StartWebRtcContactRequest;
import software.amazon.awssdk.services.connect.model.StartWebRtcContactResponse;
import software.amazon.awssdk.services.connect.model.StopContactRecordingRequest;
import software.amazon.awssdk.services.connect.model.StopContactRecordingResponse;
import software.amazon.awssdk.services.connect.model.StopContactRequest;
import software.amazon.awssdk.services.connect.model.StopContactResponse;
import software.amazon.awssdk.services.connect.model.StopContactStreamingRequest;
import software.amazon.awssdk.services.connect.model.StopContactStreamingResponse;
import software.amazon.awssdk.services.connect.model.SubmitContactEvaluationRequest;
import software.amazon.awssdk.services.connect.model.SubmitContactEvaluationResponse;
import software.amazon.awssdk.services.connect.model.SuspendContactRecordingRequest;
import software.amazon.awssdk.services.connect.model.SuspendContactRecordingResponse;
import software.amazon.awssdk.services.connect.model.TagContactRequest;
import software.amazon.awssdk.services.connect.model.TagContactResponse;
import software.amazon.awssdk.services.connect.model.TagResourceRequest;
import software.amazon.awssdk.services.connect.model.TagResourceResponse;
import software.amazon.awssdk.services.connect.model.ThrottlingException;
import software.amazon.awssdk.services.connect.model.TooManyRequestsException;
import software.amazon.awssdk.services.connect.model.TransferContactRequest;
import software.amazon.awssdk.services.connect.model.TransferContactResponse;
import software.amazon.awssdk.services.connect.model.UntagContactRequest;
import software.amazon.awssdk.services.connect.model.UntagContactResponse;
import software.amazon.awssdk.services.connect.model.UntagResourceRequest;
import software.amazon.awssdk.services.connect.model.UntagResourceResponse;
import software.amazon.awssdk.services.connect.model.UpdateAgentStatusRequest;
import software.amazon.awssdk.services.connect.model.UpdateAgentStatusResponse;
import software.amazon.awssdk.services.connect.model.UpdateAuthenticationProfileRequest;
import software.amazon.awssdk.services.connect.model.UpdateAuthenticationProfileResponse;
import software.amazon.awssdk.services.connect.model.UpdateContactAttributesRequest;
import software.amazon.awssdk.services.connect.model.UpdateContactAttributesResponse;
import software.amazon.awssdk.services.connect.model.UpdateContactEvaluationRequest;
import software.amazon.awssdk.services.connect.model.UpdateContactEvaluationResponse;
import software.amazon.awssdk.services.connect.model.UpdateContactFlowContentRequest;
import software.amazon.awssdk.services.connect.model.UpdateContactFlowContentResponse;
import software.amazon.awssdk.services.connect.model.UpdateContactFlowMetadataRequest;
import software.amazon.awssdk.services.connect.model.UpdateContactFlowMetadataResponse;
import software.amazon.awssdk.services.connect.model.UpdateContactFlowModuleContentRequest;
import software.amazon.awssdk.services.connect.model.UpdateContactFlowModuleContentResponse;
import software.amazon.awssdk.services.connect.model.UpdateContactFlowModuleMetadataRequest;
import software.amazon.awssdk.services.connect.model.UpdateContactFlowModuleMetadataResponse;
import software.amazon.awssdk.services.connect.model.UpdateContactFlowNameRequest;
import software.amazon.awssdk.services.connect.model.UpdateContactFlowNameResponse;
import software.amazon.awssdk.services.connect.model.UpdateContactRequest;
import software.amazon.awssdk.services.connect.model.UpdateContactResponse;
import software.amazon.awssdk.services.connect.model.UpdateContactRoutingDataRequest;
import software.amazon.awssdk.services.connect.model.UpdateContactRoutingDataResponse;
import software.amazon.awssdk.services.connect.model.UpdateContactScheduleRequest;
import software.amazon.awssdk.services.connect.model.UpdateContactScheduleResponse;
import software.amazon.awssdk.services.connect.model.UpdateEvaluationFormRequest;
import software.amazon.awssdk.services.connect.model.UpdateEvaluationFormResponse;
import software.amazon.awssdk.services.connect.model.UpdateHoursOfOperationRequest;
import software.amazon.awssdk.services.connect.model.UpdateHoursOfOperationResponse;
import software.amazon.awssdk.services.connect.model.UpdateInstanceAttributeRequest;
import software.amazon.awssdk.services.connect.model.UpdateInstanceAttributeResponse;
import software.amazon.awssdk.services.connect.model.UpdateInstanceStorageConfigRequest;
import software.amazon.awssdk.services.connect.model.UpdateInstanceStorageConfigResponse;
import software.amazon.awssdk.services.connect.model.UpdateParticipantRoleConfigRequest;
import software.amazon.awssdk.services.connect.model.UpdateParticipantRoleConfigResponse;
import software.amazon.awssdk.services.connect.model.UpdatePhoneNumberMetadataRequest;
import software.amazon.awssdk.services.connect.model.UpdatePhoneNumberMetadataResponse;
import software.amazon.awssdk.services.connect.model.UpdatePhoneNumberRequest;
import software.amazon.awssdk.services.connect.model.UpdatePhoneNumberResponse;
import software.amazon.awssdk.services.connect.model.UpdatePredefinedAttributeRequest;
import software.amazon.awssdk.services.connect.model.UpdatePredefinedAttributeResponse;
import software.amazon.awssdk.services.connect.model.UpdatePromptRequest;
import software.amazon.awssdk.services.connect.model.UpdatePromptResponse;
import software.amazon.awssdk.services.connect.model.UpdateQueueHoursOfOperationRequest;
import software.amazon.awssdk.services.connect.model.UpdateQueueHoursOfOperationResponse;
import software.amazon.awssdk.services.connect.model.UpdateQueueMaxContactsRequest;
import software.amazon.awssdk.services.connect.model.UpdateQueueMaxContactsResponse;
import software.amazon.awssdk.services.connect.model.UpdateQueueNameRequest;
import software.amazon.awssdk.services.connect.model.UpdateQueueNameResponse;
import software.amazon.awssdk.services.connect.model.UpdateQueueOutboundCallerConfigRequest;
import software.amazon.awssdk.services.connect.model.UpdateQueueOutboundCallerConfigResponse;
import software.amazon.awssdk.services.connect.model.UpdateQueueStatusRequest;
import software.amazon.awssdk.services.connect.model.UpdateQueueStatusResponse;
import software.amazon.awssdk.services.connect.model.UpdateQuickConnectConfigRequest;
import software.amazon.awssdk.services.connect.model.UpdateQuickConnectConfigResponse;
import software.amazon.awssdk.services.connect.model.UpdateQuickConnectNameRequest;
import software.amazon.awssdk.services.connect.model.UpdateQuickConnectNameResponse;
import software.amazon.awssdk.services.connect.model.UpdateRoutingProfileAgentAvailabilityTimerRequest;
import software.amazon.awssdk.services.connect.model.UpdateRoutingProfileAgentAvailabilityTimerResponse;
import software.amazon.awssdk.services.connect.model.UpdateRoutingProfileConcurrencyRequest;
import software.amazon.awssdk.services.connect.model.UpdateRoutingProfileConcurrencyResponse;
import software.amazon.awssdk.services.connect.model.UpdateRoutingProfileDefaultOutboundQueueRequest;
import software.amazon.awssdk.services.connect.model.UpdateRoutingProfileDefaultOutboundQueueResponse;
import software.amazon.awssdk.services.connect.model.UpdateRoutingProfileNameRequest;
import software.amazon.awssdk.services.connect.model.UpdateRoutingProfileNameResponse;
import software.amazon.awssdk.services.connect.model.UpdateRoutingProfileQueuesRequest;
import software.amazon.awssdk.services.connect.model.UpdateRoutingProfileQueuesResponse;
import software.amazon.awssdk.services.connect.model.UpdateRuleRequest;
import software.amazon.awssdk.services.connect.model.UpdateRuleResponse;
import software.amazon.awssdk.services.connect.model.UpdateSecurityProfileRequest;
import software.amazon.awssdk.services.connect.model.UpdateSecurityProfileResponse;
import software.amazon.awssdk.services.connect.model.UpdateTaskTemplateRequest;
import software.amazon.awssdk.services.connect.model.UpdateTaskTemplateResponse;
import software.amazon.awssdk.services.connect.model.UpdateTrafficDistributionRequest;
import software.amazon.awssdk.services.connect.model.UpdateTrafficDistributionResponse;
import software.amazon.awssdk.services.connect.model.UpdateUserHierarchyGroupNameRequest;
import software.amazon.awssdk.services.connect.model.UpdateUserHierarchyGroupNameResponse;
import software.amazon.awssdk.services.connect.model.UpdateUserHierarchyRequest;
import software.amazon.awssdk.services.connect.model.UpdateUserHierarchyResponse;
import software.amazon.awssdk.services.connect.model.UpdateUserHierarchyStructureRequest;
import software.amazon.awssdk.services.connect.model.UpdateUserHierarchyStructureResponse;
import software.amazon.awssdk.services.connect.model.UpdateUserIdentityInfoRequest;
import software.amazon.awssdk.services.connect.model.UpdateUserIdentityInfoResponse;
import software.amazon.awssdk.services.connect.model.UpdateUserPhoneConfigRequest;
import software.amazon.awssdk.services.connect.model.UpdateUserPhoneConfigResponse;
import software.amazon.awssdk.services.connect.model.UpdateUserProficienciesRequest;
import software.amazon.awssdk.services.connect.model.UpdateUserProficienciesResponse;
import software.amazon.awssdk.services.connect.model.UpdateUserRoutingProfileRequest;
import software.amazon.awssdk.services.connect.model.UpdateUserRoutingProfileResponse;
import software.amazon.awssdk.services.connect.model.UpdateUserSecurityProfilesRequest;
import software.amazon.awssdk.services.connect.model.UpdateUserSecurityProfilesResponse;
import software.amazon.awssdk.services.connect.model.UpdateViewContentRequest;
import software.amazon.awssdk.services.connect.model.UpdateViewContentResponse;
import software.amazon.awssdk.services.connect.model.UpdateViewMetadataRequest;
import software.amazon.awssdk.services.connect.model.UpdateViewMetadataResponse;
import software.amazon.awssdk.services.connect.model.UserNotFoundException;
import software.amazon.awssdk.services.connect.paginators.GetCurrentMetricDataIterable;
import software.amazon.awssdk.services.connect.paginators.GetCurrentUserDataIterable;
import software.amazon.awssdk.services.connect.paginators.GetMetricDataIterable;
import software.amazon.awssdk.services.connect.paginators.GetMetricDataV2Iterable;
import software.amazon.awssdk.services.connect.paginators.ListAgentStatusesIterable;
import software.amazon.awssdk.services.connect.paginators.ListApprovedOriginsIterable;
import software.amazon.awssdk.services.connect.paginators.ListAuthenticationProfilesIterable;
import software.amazon.awssdk.services.connect.paginators.ListBotsIterable;
import software.amazon.awssdk.services.connect.paginators.ListContactEvaluationsIterable;
import software.amazon.awssdk.services.connect.paginators.ListContactFlowModulesIterable;
import software.amazon.awssdk.services.connect.paginators.ListContactFlowsIterable;
import software.amazon.awssdk.services.connect.paginators.ListContactReferencesIterable;
import software.amazon.awssdk.services.connect.paginators.ListDefaultVocabulariesIterable;
import software.amazon.awssdk.services.connect.paginators.ListEvaluationFormVersionsIterable;
import software.amazon.awssdk.services.connect.paginators.ListEvaluationFormsIterable;
import software.amazon.awssdk.services.connect.paginators.ListFlowAssociationsIterable;
import software.amazon.awssdk.services.connect.paginators.ListHoursOfOperationsIterable;
import software.amazon.awssdk.services.connect.paginators.ListInstanceAttributesIterable;
import software.amazon.awssdk.services.connect.paginators.ListInstanceStorageConfigsIterable;
import software.amazon.awssdk.services.connect.paginators.ListInstancesIterable;
import software.amazon.awssdk.services.connect.paginators.ListIntegrationAssociationsIterable;
import software.amazon.awssdk.services.connect.paginators.ListLambdaFunctionsIterable;
import software.amazon.awssdk.services.connect.paginators.ListLexBotsIterable;
import software.amazon.awssdk.services.connect.paginators.ListPhoneNumbersIterable;
import software.amazon.awssdk.services.connect.paginators.ListPhoneNumbersV2Iterable;
import software.amazon.awssdk.services.connect.paginators.ListPredefinedAttributesIterable;
import software.amazon.awssdk.services.connect.paginators.ListPromptsIterable;
import software.amazon.awssdk.services.connect.paginators.ListQueueQuickConnectsIterable;
import software.amazon.awssdk.services.connect.paginators.ListQueuesIterable;
import software.amazon.awssdk.services.connect.paginators.ListQuickConnectsIterable;
import software.amazon.awssdk.services.connect.paginators.ListRealtimeContactAnalysisSegmentsV2Iterable;
import software.amazon.awssdk.services.connect.paginators.ListRoutingProfileQueuesIterable;
import software.amazon.awssdk.services.connect.paginators.ListRoutingProfilesIterable;
import software.amazon.awssdk.services.connect.paginators.ListRulesIterable;
import software.amazon.awssdk.services.connect.paginators.ListSecurityKeysIterable;
import software.amazon.awssdk.services.connect.paginators.ListSecurityProfileApplicationsIterable;
import software.amazon.awssdk.services.connect.paginators.ListSecurityProfilePermissionsIterable;
import software.amazon.awssdk.services.connect.paginators.ListSecurityProfilesIterable;
import software.amazon.awssdk.services.connect.paginators.ListTaskTemplatesIterable;
import software.amazon.awssdk.services.connect.paginators.ListTrafficDistributionGroupUsersIterable;
import software.amazon.awssdk.services.connect.paginators.ListTrafficDistributionGroupsIterable;
import software.amazon.awssdk.services.connect.paginators.ListUseCasesIterable;
import software.amazon.awssdk.services.connect.paginators.ListUserHierarchyGroupsIterable;
import software.amazon.awssdk.services.connect.paginators.ListUserProficienciesIterable;
import software.amazon.awssdk.services.connect.paginators.ListUsersIterable;
import software.amazon.awssdk.services.connect.paginators.ListViewVersionsIterable;
import software.amazon.awssdk.services.connect.paginators.ListViewsIterable;
import software.amazon.awssdk.services.connect.paginators.SearchAgentStatusesIterable;
import software.amazon.awssdk.services.connect.paginators.SearchAvailablePhoneNumbersIterable;
import software.amazon.awssdk.services.connect.paginators.SearchContactFlowModulesIterable;
import software.amazon.awssdk.services.connect.paginators.SearchContactFlowsIterable;
import software.amazon.awssdk.services.connect.paginators.SearchContactsIterable;
import software.amazon.awssdk.services.connect.paginators.SearchHoursOfOperationsIterable;
import software.amazon.awssdk.services.connect.paginators.SearchPredefinedAttributesIterable;
import software.amazon.awssdk.services.connect.paginators.SearchPromptsIterable;
import software.amazon.awssdk.services.connect.paginators.SearchQueuesIterable;
import software.amazon.awssdk.services.connect.paginators.SearchQuickConnectsIterable;
import software.amazon.awssdk.services.connect.paginators.SearchResourceTagsIterable;
import software.amazon.awssdk.services.connect.paginators.SearchRoutingProfilesIterable;
import software.amazon.awssdk.services.connect.paginators.SearchSecurityProfilesIterable;
import software.amazon.awssdk.services.connect.paginators.SearchUserHierarchyGroupsIterable;
import software.amazon.awssdk.services.connect.paginators.SearchUsersIterable;
import software.amazon.awssdk.services.connect.paginators.SearchVocabulariesIterable;

/**
 * Service client for accessing Amazon Connect. This can be created using the static {@link #builder()} method.
 *
 * 
 * 
 * 
 * Amazon
 * Connect actions
 * 
 * 
 * 
 * 
 * Amazon
 * Connect data types
 * 
 * 
 * 
 * 
 * Amazon Connect is a cloud-based contact center solution that you use to set up and manage a customer contact center
 * and provide reliable customer engagement at any scale.
 * 
 * 
 * Amazon Connect provides metrics and real-time reporting that enable you to optimize contact routing. You can also
 * resolve customer issues more efficiently by getting customers in touch with the appropriate agents.
 * 
 * 
 * There are limits to the number of Amazon Connect resources that you can create. There are also limits to the number
 * of requests that you can make per second. For more information, see Amazon Connect
 * Service Quotas in the Amazon Connect Administrator Guide.
 * 
 * 
 * You can connect programmatically to an Amazon Web Services service by using an endpoint. For a list of Amazon Connect
 * endpoints, see Amazon Connect
 * Endpoints.
 * 
 */
@Generated("software.amazon.awssdk:codegen")
@SdkPublicApi
@ThreadSafe
public interface ConnectClient extends AwsClient {
    String SERVICE_NAME = "connect";

    /**
     * Value for looking up the service's metadata from the
     * {@link software.amazon.awssdk.regions.ServiceMetadataProvider}.
     */
    String SERVICE_METADATA_ID = "connect";

    /**
     * 
     * Activates an evaluation form in the specified Amazon Connect instance. After the evaluation form is activated, it
     * is available to start new evaluations based on the form.
     * 
     *
     * @param activateEvaluationFormRequest
     * @return Result of the ActivateEvaluationForm operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ActivateEvaluationForm
     * @see AWS API Documentation
     */
    default ActivateEvaluationFormResponse activateEvaluationForm(ActivateEvaluationFormRequest activateEvaluationFormRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            ResourceConflictException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Activates an evaluation form in the specified Amazon Connect instance. After the evaluation form is activated, it
     * is available to start new evaluations based on the form.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ActivateEvaluationFormRequest.Builder} avoiding the
     * need to create one manually via {@link ActivateEvaluationFormRequest#builder()}
     * 
     *
     * @param activateEvaluationFormRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ActivateEvaluationFormRequest.Builder} to create a
     *        request.
     * @return Result of the ActivateEvaluationForm operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ActivateEvaluationForm
     * @see AWS API Documentation
     */
    default ActivateEvaluationFormResponse activateEvaluationForm(
            Consumer activateEvaluationFormRequest) throws InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, ResourceConflictException,
            AwsServiceException, SdkClientException, ConnectException {
        return activateEvaluationForm(ActivateEvaluationFormRequest.builder().applyMutation(activateEvaluationFormRequest)
                .build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Associates the specified dataset for a Amazon Connect instance with the target account. You can associate only
     * one dataset in a single call.
     * 
     *
     * @param associateAnalyticsDataSetRequest
     * @return Result of the AssociateAnalyticsDataSet operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateAnalyticsDataSet
     * @see AWS API Documentation
     */
    default AssociateAnalyticsDataSetResponse associateAnalyticsDataSet(
            AssociateAnalyticsDataSetRequest associateAnalyticsDataSetRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Associates the specified dataset for a Amazon Connect instance with the target account. You can associate only
     * one dataset in a single call.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link AssociateAnalyticsDataSetRequest.Builder} avoiding
     * the need to create one manually via {@link AssociateAnalyticsDataSetRequest#builder()}
     * 
     *
     * @param associateAnalyticsDataSetRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.AssociateAnalyticsDataSetRequest.Builder} to create a
     *        request.
     * @return Result of the AssociateAnalyticsDataSet operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateAnalyticsDataSet
     * @see AWS API Documentation
     */
    default AssociateAnalyticsDataSetResponse associateAnalyticsDataSet(
            Consumer associateAnalyticsDataSetRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return associateAnalyticsDataSet(AssociateAnalyticsDataSetRequest.builder()
                .applyMutation(associateAnalyticsDataSetRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Associates an approved origin to an Amazon Connect instance.
     * 
     *
     * @param associateApprovedOriginRequest
     * @return Result of the AssociateApprovedOrigin operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateApprovedOrigin
     * @see AWS API Documentation
     */
    default AssociateApprovedOriginResponse associateApprovedOrigin(AssociateApprovedOriginRequest associateApprovedOriginRequest)
            throws ResourceNotFoundException, ResourceConflictException, InternalServiceException, InvalidRequestException,
            InvalidParameterException, ServiceQuotaExceededException, ThrottlingException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Associates an approved origin to an Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link AssociateApprovedOriginRequest.Builder} avoiding
     * the need to create one manually via {@link AssociateApprovedOriginRequest#builder()}
     * 
     *
     * @param associateApprovedOriginRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.AssociateApprovedOriginRequest.Builder} to create a
     *        request.
     * @return Result of the AssociateApprovedOrigin operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateApprovedOrigin
     * @see AWS API Documentation
     */
    default AssociateApprovedOriginResponse associateApprovedOrigin(
            Consumer associateApprovedOriginRequest) throws ResourceNotFoundException,
            ResourceConflictException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ServiceQuotaExceededException, ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return associateApprovedOrigin(AssociateApprovedOriginRequest.builder().applyMutation(associateApprovedOriginRequest)
                .build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Allows the specified Amazon Connect instance to access the specified Amazon Lex or Amazon Lex V2 bot.
     * 
     *
     * @param associateBotRequest
     * @return Result of the AssociateBot operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateBot
     * @see AWS API
     *      Documentation
     */
    default AssociateBotResponse associateBot(AssociateBotRequest associateBotRequest) throws ResourceNotFoundException,
            ResourceConflictException, InternalServiceException, InvalidRequestException, LimitExceededException,
            ServiceQuotaExceededException, ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Allows the specified Amazon Connect instance to access the specified Amazon Lex or Amazon Lex V2 bot.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link AssociateBotRequest.Builder} avoiding the need to
     * create one manually via {@link AssociateBotRequest#builder()}
     * 
     *
     * @param associateBotRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.AssociateBotRequest.Builder} to create a request.
     * @return Result of the AssociateBot operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateBot
     * @see AWS API
     *      Documentation
     */
    default AssociateBotResponse associateBot(Consumer associateBotRequest)
            throws ResourceNotFoundException, ResourceConflictException, InternalServiceException, InvalidRequestException,
            LimitExceededException, ServiceQuotaExceededException, ThrottlingException, AwsServiceException, SdkClientException,
            ConnectException {
        return associateBot(AssociateBotRequest.builder().applyMutation(associateBotRequest).build());
    }

    /**
     * 
     * Associates an existing vocabulary as the default. Contact Lens for Amazon Connect uses the vocabulary in
     * post-call and real-time analysis sessions for the given language.
     * 
     *
     * @param associateDefaultVocabularyRequest
     * @return Result of the AssociateDefaultVocabulary operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateDefaultVocabulary
     * @see AWS API Documentation
     */
    default AssociateDefaultVocabularyResponse associateDefaultVocabulary(
            AssociateDefaultVocabularyRequest associateDefaultVocabularyRequest) throws InvalidRequestException,
            ResourceNotFoundException, InternalServiceException, ThrottlingException, AccessDeniedException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Associates an existing vocabulary as the default. Contact Lens for Amazon Connect uses the vocabulary in
     * post-call and real-time analysis sessions for the given language.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link AssociateDefaultVocabularyRequest.Builder} avoiding
     * the need to create one manually via {@link AssociateDefaultVocabularyRequest#builder()}
     * 
     *
     * @param associateDefaultVocabularyRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.AssociateDefaultVocabularyRequest.Builder} to create
     *        a request.
     * @return Result of the AssociateDefaultVocabulary operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateDefaultVocabulary
     * @see AWS API Documentation
     */
    default AssociateDefaultVocabularyResponse associateDefaultVocabulary(
            Consumer associateDefaultVocabularyRequest)
            throws InvalidRequestException, ResourceNotFoundException, InternalServiceException, ThrottlingException,
            AccessDeniedException, AwsServiceException, SdkClientException, ConnectException {
        return associateDefaultVocabulary(AssociateDefaultVocabularyRequest.builder()
                .applyMutation(associateDefaultVocabularyRequest).build());
    }

    /**
     * 
     * Associates a connect resource to a flow.
     * 
     *
     * @param associateFlowRequest
     * @return Result of the AssociateFlow operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateFlow
     * @see AWS API
     *      Documentation
     */
    default AssociateFlowResponse associateFlow(AssociateFlowRequest associateFlowRequest) throws AccessDeniedException,
            ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Associates a connect resource to a flow.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link AssociateFlowRequest.Builder} avoiding the need to
     * create one manually via {@link AssociateFlowRequest#builder()}
     * 
     *
     * @param associateFlowRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.AssociateFlowRequest.Builder} to create a request.
     * @return Result of the AssociateFlow operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateFlow
     * @see AWS API
     *      Documentation
     */
    default AssociateFlowResponse associateFlow(Consumer associateFlowRequest)
            throws AccessDeniedException, ResourceNotFoundException, InternalServiceException, InvalidRequestException,
            InvalidParameterException, ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return associateFlow(AssociateFlowRequest.builder().applyMutation(associateFlowRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Associates a storage resource type for the first time. You can only associate one type of storage configuration
     * in a single call. This means, for example, that you can't define an instance with multiple S3 buckets for storing
     * chat transcripts.
     * 
     * 
     * This API does not create a resource that doesn't exist. It only associates it to the instance. Ensure that the
     * resource being specified in the storage configuration, like an S3 bucket, exists when being used for association.
     * 
     *
     * @param associateInstanceStorageConfigRequest
     * @return Result of the AssociateInstanceStorageConfig operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateInstanceStorageConfig
     * @see AWS API Documentation
     */
    default AssociateInstanceStorageConfigResponse associateInstanceStorageConfig(
            AssociateInstanceStorageConfigRequest associateInstanceStorageConfigRequest) throws ResourceNotFoundException,
            ResourceConflictException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Associates a storage resource type for the first time. You can only associate one type of storage configuration
     * in a single call. This means, for example, that you can't define an instance with multiple S3 buckets for storing
     * chat transcripts.
     * 
     * 
     * This API does not create a resource that doesn't exist. It only associates it to the instance. Ensure that the
     * resource being specified in the storage configuration, like an S3 bucket, exists when being used for association.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link AssociateInstanceStorageConfigRequest.Builder}
     * avoiding the need to create one manually via {@link AssociateInstanceStorageConfigRequest#builder()}
     * 
     *
     * @param associateInstanceStorageConfigRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.AssociateInstanceStorageConfigRequest.Builder} to
     *        create a request.
     * @return Result of the AssociateInstanceStorageConfig operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateInstanceStorageConfig
     * @see AWS API Documentation
     */
    default AssociateInstanceStorageConfigResponse associateInstanceStorageConfig(
            Consumer associateInstanceStorageConfigRequest)
            throws ResourceNotFoundException, ResourceConflictException, InternalServiceException, InvalidRequestException,
            InvalidParameterException, ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return associateInstanceStorageConfig(AssociateInstanceStorageConfigRequest.builder()
                .applyMutation(associateInstanceStorageConfigRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Allows the specified Amazon Connect instance to access the specified Lambda function.
     * 
     *
     * @param associateLambdaFunctionRequest
     * @return Result of the AssociateLambdaFunction operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateLambdaFunction
     * @see AWS API Documentation
     */
    default AssociateLambdaFunctionResponse associateLambdaFunction(AssociateLambdaFunctionRequest associateLambdaFunctionRequest)
            throws ResourceNotFoundException, ResourceConflictException, InternalServiceException, InvalidRequestException,
            InvalidParameterException, ServiceQuotaExceededException, ThrottlingException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Allows the specified Amazon Connect instance to access the specified Lambda function.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link AssociateLambdaFunctionRequest.Builder} avoiding
     * the need to create one manually via {@link AssociateLambdaFunctionRequest#builder()}
     * 
     *
     * @param associateLambdaFunctionRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.AssociateLambdaFunctionRequest.Builder} to create a
     *        request.
     * @return Result of the AssociateLambdaFunction operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateLambdaFunction
     * @see AWS API Documentation
     */
    default AssociateLambdaFunctionResponse associateLambdaFunction(
            Consumer associateLambdaFunctionRequest) throws ResourceNotFoundException,
            ResourceConflictException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ServiceQuotaExceededException, ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return associateLambdaFunction(AssociateLambdaFunctionRequest.builder().applyMutation(associateLambdaFunctionRequest)
                .build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Allows the specified Amazon Connect instance to access the specified Amazon Lex V1 bot. This API only supports
     * the association of Amazon Lex V1 bots.
     * 
     *
     * @param associateLexBotRequest
     * @return Result of the AssociateLexBot operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateLexBot
     * @see AWS API
     *      Documentation
     */
    default AssociateLexBotResponse associateLexBot(AssociateLexBotRequest associateLexBotRequest)
            throws ResourceNotFoundException, ResourceConflictException, InternalServiceException, InvalidRequestException,
            InvalidParameterException, ServiceQuotaExceededException, ThrottlingException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Allows the specified Amazon Connect instance to access the specified Amazon Lex V1 bot. This API only supports
     * the association of Amazon Lex V1 bots.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link AssociateLexBotRequest.Builder} avoiding the need
     * to create one manually via {@link AssociateLexBotRequest#builder()}
     * 
     *
     * @param associateLexBotRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.AssociateLexBotRequest.Builder} to create a request.
     * @return Result of the AssociateLexBot operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateLexBot
     * @see AWS API
     *      Documentation
     */
    default AssociateLexBotResponse associateLexBot(Consumer associateLexBotRequest)
            throws ResourceNotFoundException, ResourceConflictException, InternalServiceException, InvalidRequestException,
            InvalidParameterException, ServiceQuotaExceededException, ThrottlingException, AwsServiceException,
            SdkClientException, ConnectException {
        return associateLexBot(AssociateLexBotRequest.builder().applyMutation(associateLexBotRequest).build());
    }

    /**
     * 
     * Associates a flow with a phone number claimed to your Amazon Connect instance.
     * 
     * 
     * 
     * If the number is claimed to a traffic distribution group, and you are calling this API using an instance in the
     * Amazon Web Services Region where the traffic distribution group was created, you can use either a full phone
     * number ARN or UUID value for the PhoneNumberId URI request parameter. However, if the number is
     * claimed to a traffic distribution group and you are calling this API using an instance in the alternate Amazon
     * Web Services Region associated with the traffic distribution group, you must provide a full phone number ARN. If
     * a UUID is provided in this scenario, you will receive a ResourceNotFoundException.
     * 
     * 
     *
     * @param associatePhoneNumberContactFlowRequest
     * @return Result of the AssociatePhoneNumberContactFlow operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociatePhoneNumberContactFlow
     * @see AWS API Documentation
     */
    default AssociatePhoneNumberContactFlowResponse associatePhoneNumberContactFlow(
            AssociatePhoneNumberContactFlowRequest associatePhoneNumberContactFlowRequest) throws InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, AccessDeniedException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Associates a flow with a phone number claimed to your Amazon Connect instance.
     * 
     * 
     * 
     * If the number is claimed to a traffic distribution group, and you are calling this API using an instance in the
     * Amazon Web Services Region where the traffic distribution group was created, you can use either a full phone
     * number ARN or UUID value for the PhoneNumberId URI request parameter. However, if the number is
     * claimed to a traffic distribution group and you are calling this API using an instance in the alternate Amazon
     * Web Services Region associated with the traffic distribution group, you must provide a full phone number ARN. If
     * a UUID is provided in this scenario, you will receive a ResourceNotFoundException.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link AssociatePhoneNumberContactFlowRequest.Builder}
     * avoiding the need to create one manually via {@link AssociatePhoneNumberContactFlowRequest#builder()}
     * 
     *
     * @param associatePhoneNumberContactFlowRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.AssociatePhoneNumberContactFlowRequest.Builder} to
     *        create a request.
     * @return Result of the AssociatePhoneNumberContactFlow operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociatePhoneNumberContactFlow
     * @see AWS API Documentation
     */
    default AssociatePhoneNumberContactFlowResponse associatePhoneNumberContactFlow(
            Consumer associatePhoneNumberContactFlowRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AccessDeniedException, AwsServiceException, SdkClientException, ConnectException {
        return associatePhoneNumberContactFlow(AssociatePhoneNumberContactFlowRequest.builder()
                .applyMutation(associatePhoneNumberContactFlowRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Associates a set of quick connects with a queue.
     * 
     *
     * @param associateQueueQuickConnectsRequest
     * @return Result of the AssociateQueueQuickConnects operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateQueueQuickConnects
     * @see AWS API Documentation
     */
    default AssociateQueueQuickConnectsResponse associateQueueQuickConnects(
            AssociateQueueQuickConnectsRequest associateQueueQuickConnectsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, LimitExceededException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Associates a set of quick connects with a queue.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link AssociateQueueQuickConnectsRequest.Builder}
     * avoiding the need to create one manually via {@link AssociateQueueQuickConnectsRequest#builder()}
     * 
     *
     * @param associateQueueQuickConnectsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.AssociateQueueQuickConnectsRequest.Builder} to create
     *        a request.
     * @return Result of the AssociateQueueQuickConnects operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateQueueQuickConnects
     * @see AWS API Documentation
     */
    default AssociateQueueQuickConnectsResponse associateQueueQuickConnects(
            Consumer associateQueueQuickConnectsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, LimitExceededException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return associateQueueQuickConnects(AssociateQueueQuickConnectsRequest.builder()
                .applyMutation(associateQueueQuickConnectsRequest).build());
    }

    /**
     * 
     * Associates a set of queues with a routing profile.
     * 
     *
     * @param associateRoutingProfileQueuesRequest
     * @return Result of the AssociateRoutingProfileQueues operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateRoutingProfileQueues
     * @see AWS API Documentation
     */
    default AssociateRoutingProfileQueuesResponse associateRoutingProfileQueues(
            AssociateRoutingProfileQueuesRequest associateRoutingProfileQueuesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Associates a set of queues with a routing profile.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link AssociateRoutingProfileQueuesRequest.Builder}
     * avoiding the need to create one manually via {@link AssociateRoutingProfileQueuesRequest#builder()}
     * 
     *
     * @param associateRoutingProfileQueuesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.AssociateRoutingProfileQueuesRequest.Builder} to
     *        create a request.
     * @return Result of the AssociateRoutingProfileQueues operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateRoutingProfileQueues
     * @see AWS API Documentation
     */
    default AssociateRoutingProfileQueuesResponse associateRoutingProfileQueues(
            Consumer associateRoutingProfileQueuesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return associateRoutingProfileQueues(AssociateRoutingProfileQueuesRequest.builder()
                .applyMutation(associateRoutingProfileQueuesRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Associates a security key to the instance.
     * 
     *
     * @param associateSecurityKeyRequest
     * @return Result of the AssociateSecurityKey operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateSecurityKey
     * @see AWS
     *      API Documentation
     */
    default AssociateSecurityKeyResponse associateSecurityKey(AssociateSecurityKeyRequest associateSecurityKeyRequest)
            throws ResourceNotFoundException, ResourceConflictException, InternalServiceException, InvalidRequestException,
            InvalidParameterException, ServiceQuotaExceededException, ThrottlingException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Associates a security key to the instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link AssociateSecurityKeyRequest.Builder} avoiding the
     * need to create one manually via {@link AssociateSecurityKeyRequest#builder()}
     * 
     *
     * @param associateSecurityKeyRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.AssociateSecurityKeyRequest.Builder} to create a
     *        request.
     * @return Result of the AssociateSecurityKey operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateSecurityKey
     * @see AWS
     *      API Documentation
     */
    default AssociateSecurityKeyResponse associateSecurityKey(
            Consumer associateSecurityKeyRequest) throws ResourceNotFoundException,
            ResourceConflictException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ServiceQuotaExceededException, ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return associateSecurityKey(AssociateSecurityKeyRequest.builder().applyMutation(associateSecurityKeyRequest).build());
    }

    /**
     * 
     * Associates an agent with a traffic distribution group.
     * 
     *
     * @param associateTrafficDistributionGroupUserRequest
     * @return Result of the AssociateTrafficDistributionGroupUser operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateTrafficDistributionGroupUser
     * @see AWS API Documentation
     */
    default AssociateTrafficDistributionGroupUserResponse associateTrafficDistributionGroupUser(
            AssociateTrafficDistributionGroupUserRequest associateTrafficDistributionGroupUserRequest)
            throws InvalidRequestException, AccessDeniedException, ThrottlingException, ResourceNotFoundException,
            ResourceConflictException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Associates an agent with a traffic distribution group.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the
     * {@link AssociateTrafficDistributionGroupUserRequest.Builder} avoiding the need to create one manually via
     * {@link AssociateTrafficDistributionGroupUserRequest#builder()}
     * 
     *
     * @param associateTrafficDistributionGroupUserRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.AssociateTrafficDistributionGroupUserRequest.Builder}
     *        to create a request.
     * @return Result of the AssociateTrafficDistributionGroupUser operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateTrafficDistributionGroupUser
     * @see AWS API Documentation
     */
    default AssociateTrafficDistributionGroupUserResponse associateTrafficDistributionGroupUser(
            Consumer associateTrafficDistributionGroupUserRequest)
            throws InvalidRequestException, AccessDeniedException, ThrottlingException, ResourceNotFoundException,
            ResourceConflictException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return associateTrafficDistributionGroupUser(AssociateTrafficDistributionGroupUserRequest.builder()
                .applyMutation(associateTrafficDistributionGroupUserRequest).build());
    }

    /**
     * 
     * >Associates a set of proficiencies with a user.
     * 
     *
     * @param associateUserProficienciesRequest
     * @return Result of the AssociateUserProficiencies operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateUserProficiencies
     * @see AWS API Documentation
     */
    default AssociateUserProficienciesResponse associateUserProficiencies(
            AssociateUserProficienciesRequest associateUserProficienciesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * >Associates a set of proficiencies with a user.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link AssociateUserProficienciesRequest.Builder} avoiding
     * the need to create one manually via {@link AssociateUserProficienciesRequest#builder()}
     * 
     *
     * @param associateUserProficienciesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.AssociateUserProficienciesRequest.Builder} to create
     *        a request.
     * @return Result of the AssociateUserProficiencies operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.AssociateUserProficiencies
     * @see AWS API Documentation
     */
    default AssociateUserProficienciesResponse associateUserProficiencies(
            Consumer associateUserProficienciesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return associateUserProficiencies(AssociateUserProficienciesRequest.builder()
                .applyMutation(associateUserProficienciesRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Associates a list of analytics datasets for a given Amazon Connect instance to a target account. You can
     * associate multiple datasets in a single call.
     * 
     *
     * @param batchAssociateAnalyticsDataSetRequest
     * @return Result of the BatchAssociateAnalyticsDataSet operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.BatchAssociateAnalyticsDataSet
     * @see AWS API Documentation
     */
    default BatchAssociateAnalyticsDataSetResponse batchAssociateAnalyticsDataSet(
            BatchAssociateAnalyticsDataSetRequest batchAssociateAnalyticsDataSetRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Associates a list of analytics datasets for a given Amazon Connect instance to a target account. You can
     * associate multiple datasets in a single call.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link BatchAssociateAnalyticsDataSetRequest.Builder}
     * avoiding the need to create one manually via {@link BatchAssociateAnalyticsDataSetRequest#builder()}
     * 
     *
     * @param batchAssociateAnalyticsDataSetRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.BatchAssociateAnalyticsDataSetRequest.Builder} to
     *        create a request.
     * @return Result of the BatchAssociateAnalyticsDataSet operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.BatchAssociateAnalyticsDataSet
     * @see AWS API Documentation
     */
    default BatchAssociateAnalyticsDataSetResponse batchAssociateAnalyticsDataSet(
            Consumer batchAssociateAnalyticsDataSetRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return batchAssociateAnalyticsDataSet(BatchAssociateAnalyticsDataSetRequest.builder()
                .applyMutation(batchAssociateAnalyticsDataSetRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Removes a list of analytics datasets associated with a given Amazon Connect instance. You can disassociate
     * multiple datasets in a single call.
     * 
     *
     * @param batchDisassociateAnalyticsDataSetRequest
     * @return Result of the BatchDisassociateAnalyticsDataSet operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.BatchDisassociateAnalyticsDataSet
     * @see AWS API Documentation
     */
    default BatchDisassociateAnalyticsDataSetResponse batchDisassociateAnalyticsDataSet(
            BatchDisassociateAnalyticsDataSetRequest batchDisassociateAnalyticsDataSetRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Removes a list of analytics datasets associated with a given Amazon Connect instance. You can disassociate
     * multiple datasets in a single call.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link BatchDisassociateAnalyticsDataSetRequest.Builder}
     * avoiding the need to create one manually via {@link BatchDisassociateAnalyticsDataSetRequest#builder()}
     * 
     *
     * @param batchDisassociateAnalyticsDataSetRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.BatchDisassociateAnalyticsDataSetRequest.Builder} to
     *        create a request.
     * @return Result of the BatchDisassociateAnalyticsDataSet operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.BatchDisassociateAnalyticsDataSet
     * @see AWS API Documentation
     */
    default BatchDisassociateAnalyticsDataSetResponse batchDisassociateAnalyticsDataSet(
            Consumer batchDisassociateAnalyticsDataSetRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return batchDisassociateAnalyticsDataSet(BatchDisassociateAnalyticsDataSetRequest.builder()
                .applyMutation(batchDisassociateAnalyticsDataSetRequest).build());
    }

    /**
     * 
     * Allows you to retrieve metadata about multiple attached files on an associated resource. Each attached file
     * provided in the input list must be associated with the input AssociatedResourceArn.
     * 
     *
     * @param batchGetAttachedFileMetadataRequest
     * @return Result of the BatchGetAttachedFileMetadata operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.BatchGetAttachedFileMetadata
     * @see AWS API Documentation
     */
    default BatchGetAttachedFileMetadataResponse batchGetAttachedFileMetadata(
            BatchGetAttachedFileMetadataRequest batchGetAttachedFileMetadataRequest) throws AccessDeniedException,
            InvalidRequestException, InternalServiceException, ResourceNotFoundException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Allows you to retrieve metadata about multiple attached files on an associated resource. Each attached file
     * provided in the input list must be associated with the input AssociatedResourceArn.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link BatchGetAttachedFileMetadataRequest.Builder}
     * avoiding the need to create one manually via {@link BatchGetAttachedFileMetadataRequest#builder()}
     * 
     *
     * @param batchGetAttachedFileMetadataRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.BatchGetAttachedFileMetadataRequest.Builder} to
     *        create a request.
     * @return Result of the BatchGetAttachedFileMetadata operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.BatchGetAttachedFileMetadata
     * @see AWS API Documentation
     */
    default BatchGetAttachedFileMetadataResponse batchGetAttachedFileMetadata(
            Consumer batchGetAttachedFileMetadataRequest)
            throws AccessDeniedException, InvalidRequestException, InternalServiceException, ResourceNotFoundException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return batchGetAttachedFileMetadata(BatchGetAttachedFileMetadataRequest.builder()
                .applyMutation(batchGetAttachedFileMetadataRequest).build());
    }

    /**
     * 
     * Retrieve the flow associations for the given resources.
     * 
     *
     * @param batchGetFlowAssociationRequest
     * @return Result of the BatchGetFlowAssociation operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.BatchGetFlowAssociation
     * @see AWS API Documentation
     */
    default BatchGetFlowAssociationResponse batchGetFlowAssociation(BatchGetFlowAssociationRequest batchGetFlowAssociationRequest)
            throws AccessDeniedException, ResourceNotFoundException, InternalServiceException, InvalidRequestException,
            InvalidParameterException, ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Retrieve the flow associations for the given resources.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link BatchGetFlowAssociationRequest.Builder} avoiding
     * the need to create one manually via {@link BatchGetFlowAssociationRequest#builder()}
     * 
     *
     * @param batchGetFlowAssociationRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.BatchGetFlowAssociationRequest.Builder} to create a
     *        request.
     * @return Result of the BatchGetFlowAssociation operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.BatchGetFlowAssociation
     * @see AWS API Documentation
     */
    default BatchGetFlowAssociationResponse batchGetFlowAssociation(
            Consumer batchGetFlowAssociationRequest) throws AccessDeniedException,
            ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return batchGetFlowAssociation(BatchGetFlowAssociationRequest.builder().applyMutation(batchGetFlowAssociationRequest)
                .build());
    }

    /**
     * 
     * 
     * Only the Amazon Connect outbound campaigns service principal is allowed to assume a role in your account and call
     * this API.
     * 
     * 
     * 
     * Allows you to create a batch of contacts in Amazon Connect. The outbound campaigns capability ingests dial
     * requests via the PutDialRequestBatch API. It then uses BatchPutContact to create contacts corresponding to those dial
     * requests. If agents are available, the dial requests are dialed out, which results in a voice call. The resulting
     * voice call uses the same contactId that was created by BatchPutContact.
     * 
     *
     * @param batchPutContactRequest
     * @return Result of the BatchPutContact operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws IdempotencyException
     *         An entity with the same name already exists.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.BatchPutContact
     * @see AWS API
     *      Documentation
     */
    default BatchPutContactResponse batchPutContact(BatchPutContactRequest batchPutContactRequest) throws AccessDeniedException,
            InternalServiceException, InvalidRequestException, ResourceNotFoundException, LimitExceededException,
            IdempotencyException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * 
     * Only the Amazon Connect outbound campaigns service principal is allowed to assume a role in your account and call
     * this API.
     * 
     * 
     * 
     * Allows you to create a batch of contacts in Amazon Connect. The outbound campaigns capability ingests dial
     * requests via the PutDialRequestBatch API. It then uses BatchPutContact to create contacts corresponding to those dial
     * requests. If agents are available, the dial requests are dialed out, which results in a voice call. The resulting
     * voice call uses the same contactId that was created by BatchPutContact.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link BatchPutContactRequest.Builder} avoiding the need
     * to create one manually via {@link BatchPutContactRequest#builder()}
     * 
     *
     * @param batchPutContactRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.BatchPutContactRequest.Builder} to create a request.
     * @return Result of the BatchPutContact operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws IdempotencyException
     *         An entity with the same name already exists.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.BatchPutContact
     * @see AWS API
     *      Documentation
     */
    default BatchPutContactResponse batchPutContact(Consumer batchPutContactRequest)
            throws AccessDeniedException, InternalServiceException, InvalidRequestException, ResourceNotFoundException,
            LimitExceededException, IdempotencyException, AwsServiceException, SdkClientException, ConnectException {
        return batchPutContact(BatchPutContactRequest.builder().applyMutation(batchPutContactRequest).build());
    }

    /**
     * 
     * Claims an available phone number to your Amazon Connect instance or traffic distribution group. You can call this
     * API only in the same Amazon Web Services Region where the Amazon Connect instance or traffic distribution group
     * was created.
     * 
     * 
     * For more information about how to use this operation, see Claim a phone number in your
     * country and Claim phone numbers to traffic distribution groups in the Amazon Connect Administrator Guide.
     * 
     * 
     * 
     * You can call the SearchAvailablePhoneNumbers API for available phone numbers that you can claim. Call the DescribePhoneNumber API to verify the status of a previous ClaimPhoneNumber
     * operation.
     * 
     * 
     * 
     * If you plan to claim and release numbers frequently, contact us for a service quota exception. Otherwise, it is
     * possible you will be blocked from claiming and releasing any more numbers until up to 180 days past the oldest
     * number released has expired.
     * 
     * 
     * By default you can claim and release up to 200% of your maximum number of active phone numbers. If you claim and
     * release phone numbers using the UI or API during a rolling 180 day cycle that exceeds 200% of your phone number
     * service level quota, you will be blocked from claiming any more numbers until 180 days past the oldest number
     * released has expired.
     * 
     * 
     * For example, if you already have 99 claimed numbers and a service level quota of 99 phone numbers, and in any 180
     * day period you release 99, claim 99, and then release 99, you will have exceeded the 200% limit. At that point
     * you are blocked from claiming any more numbers until you open an Amazon Web Services support ticket.
     * 
     *
     * @param claimPhoneNumberRequest
     * @return Result of the ClaimPhoneNumber operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws IdempotencyException
     *         An entity with the same name already exists.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ClaimPhoneNumber
     * @see AWS API
     *      Documentation
     */
    default ClaimPhoneNumberResponse claimPhoneNumber(ClaimPhoneNumberRequest claimPhoneNumberRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            IdempotencyException, AccessDeniedException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Claims an available phone number to your Amazon Connect instance or traffic distribution group. You can call this
     * API only in the same Amazon Web Services Region where the Amazon Connect instance or traffic distribution group
     * was created.
     * 
     * 
     * For more information about how to use this operation, see Claim a phone number in your
     * country and Claim phone numbers to traffic distribution groups in the Amazon Connect Administrator Guide.
     * 
     * 
     * 
     * You can call the SearchAvailablePhoneNumbers API for available phone numbers that you can claim. Call the DescribePhoneNumber API to verify the status of a previous ClaimPhoneNumber
     * operation.
     * 
     * 
     * 
     * If you plan to claim and release numbers frequently, contact us for a service quota exception. Otherwise, it is
     * possible you will be blocked from claiming and releasing any more numbers until up to 180 days past the oldest
     * number released has expired.
     * 
     * 
     * By default you can claim and release up to 200% of your maximum number of active phone numbers. If you claim and
     * release phone numbers using the UI or API during a rolling 180 day cycle that exceeds 200% of your phone number
     * service level quota, you will be blocked from claiming any more numbers until 180 days past the oldest number
     * released has expired.
     * 
     * 
     * For example, if you already have 99 claimed numbers and a service level quota of 99 phone numbers, and in any 180
     * day period you release 99, claim 99, and then release 99, you will have exceeded the 200% limit. At that point
     * you are blocked from claiming any more numbers until you open an Amazon Web Services support ticket.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ClaimPhoneNumberRequest.Builder} avoiding the need
     * to create one manually via {@link ClaimPhoneNumberRequest#builder()}
     * 
     *
     * @param claimPhoneNumberRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ClaimPhoneNumberRequest.Builder} to create a request.
     * @return Result of the ClaimPhoneNumber operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws IdempotencyException
     *         An entity with the same name already exists.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ClaimPhoneNumber
     * @see AWS API
     *      Documentation
     */
    default ClaimPhoneNumberResponse claimPhoneNumber(Consumer claimPhoneNumberRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            IdempotencyException, AccessDeniedException, AwsServiceException, SdkClientException, ConnectException {
        return claimPhoneNumber(ClaimPhoneNumberRequest.builder().applyMutation(claimPhoneNumberRequest).build());
    }

    /**
     * 
     * Allows you to confirm that the attached file has been uploaded using the pre-signed URL provided in the
     * StartAttachedFileUpload API.
     * 
     *
     * @param completeAttachedFileUploadRequest
     *        Request to CompleteAttachedFileUpload API
     * @return Result of the CompleteAttachedFileUpload operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CompleteAttachedFileUpload
     * @see AWS API Documentation
     */
    default CompleteAttachedFileUploadResponse completeAttachedFileUpload(
            CompleteAttachedFileUploadRequest completeAttachedFileUploadRequest) throws AccessDeniedException,
            InvalidRequestException, InternalServiceException, ResourceNotFoundException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Allows you to confirm that the attached file has been uploaded using the pre-signed URL provided in the
     * StartAttachedFileUpload API.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CompleteAttachedFileUploadRequest.Builder} avoiding
     * the need to create one manually via {@link CompleteAttachedFileUploadRequest#builder()}
     * 
     *
     * @param completeAttachedFileUploadRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CompleteAttachedFileUploadRequest.Builder} to create
     *        a request. Request to CompleteAttachedFileUpload API
     * @return Result of the CompleteAttachedFileUpload operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CompleteAttachedFileUpload
     * @see AWS API Documentation
     */
    default CompleteAttachedFileUploadResponse completeAttachedFileUpload(
            Consumer completeAttachedFileUploadRequest) throws AccessDeniedException,
            InvalidRequestException, InternalServiceException, ResourceNotFoundException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return completeAttachedFileUpload(CompleteAttachedFileUploadRequest.builder()
                .applyMutation(completeAttachedFileUploadRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Creates an agent status for the specified Amazon Connect instance.
     * 
     *
     * @param createAgentStatusRequest
     * @return Result of the CreateAgentStatus operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateAgentStatus
     * @see AWS API
     *      Documentation
     */
    default CreateAgentStatusResponse createAgentStatus(CreateAgentStatusRequest createAgentStatusRequest)
            throws InvalidRequestException, InvalidParameterException, DuplicateResourceException, ResourceNotFoundException,
            LimitExceededException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Creates an agent status for the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateAgentStatusRequest.Builder} avoiding the need
     * to create one manually via {@link CreateAgentStatusRequest#builder()}
     * 
     *
     * @param createAgentStatusRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateAgentStatusRequest.Builder} to create a
     *        request.
     * @return Result of the CreateAgentStatus operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateAgentStatus
     * @see AWS API
     *      Documentation
     */
    default CreateAgentStatusResponse createAgentStatus(Consumer createAgentStatusRequest)
            throws InvalidRequestException, InvalidParameterException, DuplicateResourceException, ResourceNotFoundException,
            LimitExceededException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        return createAgentStatus(CreateAgentStatusRequest.builder().applyMutation(createAgentStatusRequest).build());
    }

    /**
     * 
     * Creates a flow for the specified Amazon Connect instance.
     * 
     * 
     * You can also create and update flows using the Amazon Connect Flow
     * language.
     * 
     *
     * @param createContactFlowRequest
     * @return Result of the CreateContactFlow operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidContactFlowException
     *         The flow is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateContactFlow
     * @see AWS API
     *      Documentation
     */
    default CreateContactFlowResponse createContactFlow(CreateContactFlowRequest createContactFlowRequest)
            throws InvalidRequestException, InvalidContactFlowException, InvalidParameterException, DuplicateResourceException,
            LimitExceededException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Creates a flow for the specified Amazon Connect instance.
     * 
     * 
     * You can also create and update flows using the Amazon Connect Flow
     * language.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateContactFlowRequest.Builder} avoiding the need
     * to create one manually via {@link CreateContactFlowRequest#builder()}
     * 
     *
     * @param createContactFlowRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateContactFlowRequest.Builder} to create a
     *        request.
     * @return Result of the CreateContactFlow operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidContactFlowException
     *         The flow is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateContactFlow
     * @see AWS API
     *      Documentation
     */
    default CreateContactFlowResponse createContactFlow(Consumer createContactFlowRequest)
            throws InvalidRequestException, InvalidContactFlowException, InvalidParameterException, DuplicateResourceException,
            LimitExceededException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return createContactFlow(CreateContactFlowRequest.builder().applyMutation(createContactFlowRequest).build());
    }

    /**
     * 
     * Creates a flow module for the specified Amazon Connect instance.
     * 
     *
     * @param createContactFlowModuleRequest
     * @return Result of the CreateContactFlowModule operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidContactFlowModuleException
     *         The problems with the module. Please fix before trying again.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws IdempotencyException
     *         An entity with the same name already exists.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateContactFlowModule
     * @see AWS API Documentation
     */
    default CreateContactFlowModuleResponse createContactFlowModule(CreateContactFlowModuleRequest createContactFlowModuleRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidContactFlowModuleException, InvalidParameterException,
            DuplicateResourceException, LimitExceededException, ResourceNotFoundException, ThrottlingException,
            IdempotencyException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Creates a flow module for the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateContactFlowModuleRequest.Builder} avoiding
     * the need to create one manually via {@link CreateContactFlowModuleRequest#builder()}
     * 
     *
     * @param createContactFlowModuleRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateContactFlowModuleRequest.Builder} to create a
     *        request.
     * @return Result of the CreateContactFlowModule operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidContactFlowModuleException
     *         The problems with the module. Please fix before trying again.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws IdempotencyException
     *         An entity with the same name already exists.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateContactFlowModule
     * @see AWS API Documentation
     */
    default CreateContactFlowModuleResponse createContactFlowModule(
            Consumer createContactFlowModuleRequest) throws AccessDeniedException,
            InvalidRequestException, InvalidContactFlowModuleException, InvalidParameterException, DuplicateResourceException,
            LimitExceededException, ResourceNotFoundException, ThrottlingException, IdempotencyException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return createContactFlowModule(CreateContactFlowModuleRequest.builder().applyMutation(createContactFlowModuleRequest)
                .build());
    }

    /**
     * 
     * Creates an evaluation form in the specified Amazon Connect instance. The form can be used to define questions
     * related to agent performance, and create sections to organize such questions. Question and section identifiers
     * cannot be duplicated within the same evaluation form.
     * 
     *
     * @param createEvaluationFormRequest
     * @return Result of the CreateEvaluationForm operation returned by the service.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateEvaluationForm
     * @see AWS
     *      API Documentation
     */
    default CreateEvaluationFormResponse createEvaluationForm(CreateEvaluationFormRequest createEvaluationFormRequest)
            throws InternalServiceException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            ServiceQuotaExceededException, ResourceConflictException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Creates an evaluation form in the specified Amazon Connect instance. The form can be used to define questions
     * related to agent performance, and create sections to organize such questions. Question and section identifiers
     * cannot be duplicated within the same evaluation form.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateEvaluationFormRequest.Builder} avoiding the
     * need to create one manually via {@link CreateEvaluationFormRequest#builder()}
     * 
     *
     * @param createEvaluationFormRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateEvaluationFormRequest.Builder} to create a
     *        request.
     * @return Result of the CreateEvaluationForm operation returned by the service.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateEvaluationForm
     * @see AWS
     *      API Documentation
     */
    default CreateEvaluationFormResponse createEvaluationForm(
            Consumer createEvaluationFormRequest) throws InternalServiceException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, ServiceQuotaExceededException,
            ResourceConflictException, AwsServiceException, SdkClientException, ConnectException {
        return createEvaluationForm(CreateEvaluationFormRequest.builder().applyMutation(createEvaluationFormRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Creates hours of operation.
     * 
     *
     * @param createHoursOfOperationRequest
     * @return Result of the CreateHoursOfOperation operation returned by the service.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateHoursOfOperation
     * @see AWS API Documentation
     */
    default CreateHoursOfOperationResponse createHoursOfOperation(CreateHoursOfOperationRequest createHoursOfOperationRequest)
            throws DuplicateResourceException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            LimitExceededException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Creates hours of operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateHoursOfOperationRequest.Builder} avoiding the
     * need to create one manually via {@link CreateHoursOfOperationRequest#builder()}
     * 
     *
     * @param createHoursOfOperationRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateHoursOfOperationRequest.Builder} to create a
     *        request.
     * @return Result of the CreateHoursOfOperation operation returned by the service.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateHoursOfOperation
     * @see AWS API Documentation
     */
    default CreateHoursOfOperationResponse createHoursOfOperation(
            Consumer createHoursOfOperationRequest) throws DuplicateResourceException,
            InvalidRequestException, InvalidParameterException, ResourceNotFoundException, LimitExceededException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return createHoursOfOperation(CreateHoursOfOperationRequest.builder().applyMutation(createHoursOfOperationRequest)
                .build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Initiates an Amazon Connect instance with all the supported channels enabled. It does not attach any storage,
     * such as Amazon Simple Storage Service (Amazon S3) or Amazon Kinesis. It also does not allow for any
     * configurations on features, such as Contact Lens for Amazon Connect.
     * 
     * 
     * For more information, see Create an Amazon
     * Connect instance in the Amazon Connect Administrator Guide.
     * 
     * 
     * Amazon Connect enforces a limit on the total number of instances that you can create or delete in 30 days. If you
     * exceed this limit, you will get an error message indicating there has been an excessive number of attempts at
     * creating or deleting instances. You must wait 30 days before you can restart creating and deleting instances in
     * your account.
     * 
     *
     * @param createInstanceRequest
     * @return Result of the CreateInstance operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateInstance
     * @see AWS API
     *      Documentation
     */
    default CreateInstanceResponse createInstance(CreateInstanceRequest createInstanceRequest) throws InvalidRequestException,
            ServiceQuotaExceededException, ThrottlingException, ResourceNotFoundException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Initiates an Amazon Connect instance with all the supported channels enabled. It does not attach any storage,
     * such as Amazon Simple Storage Service (Amazon S3) or Amazon Kinesis. It also does not allow for any
     * configurations on features, such as Contact Lens for Amazon Connect.
     * 
     * 
     * For more information, see Create an Amazon
     * Connect instance in the Amazon Connect Administrator Guide.
     * 
     * 
     * Amazon Connect enforces a limit on the total number of instances that you can create or delete in 30 days. If you
     * exceed this limit, you will get an error message indicating there has been an excessive number of attempts at
     * creating or deleting instances. You must wait 30 days before you can restart creating and deleting instances in
     * your account.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateInstanceRequest.Builder} avoiding the need to
     * create one manually via {@link CreateInstanceRequest#builder()}
     * 
     *
     * @param createInstanceRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateInstanceRequest.Builder} to create a request.
     * @return Result of the CreateInstance operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateInstance
     * @see AWS API
     *      Documentation
     */
    default CreateInstanceResponse createInstance(Consumer createInstanceRequest)
            throws InvalidRequestException, ServiceQuotaExceededException, ThrottlingException, ResourceNotFoundException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return createInstance(CreateInstanceRequest.builder().applyMutation(createInstanceRequest).build());
    }

    /**
     * 
     * Creates an Amazon Web Services resource association with an Amazon Connect instance.
     * 
     *
     * @param createIntegrationAssociationRequest
     * @return Result of the CreateIntegrationAssociation operation returned by the service.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateIntegrationAssociation
     * @see AWS API Documentation
     */
    default CreateIntegrationAssociationResponse createIntegrationAssociation(
            CreateIntegrationAssociationRequest createIntegrationAssociationRequest) throws DuplicateResourceException,
            ResourceNotFoundException, InternalServiceException, InvalidRequestException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Creates an Amazon Web Services resource association with an Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateIntegrationAssociationRequest.Builder}
     * avoiding the need to create one manually via {@link CreateIntegrationAssociationRequest#builder()}
     * 
     *
     * @param createIntegrationAssociationRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateIntegrationAssociationRequest.Builder} to
     *        create a request.
     * @return Result of the CreateIntegrationAssociation operation returned by the service.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateIntegrationAssociation
     * @see AWS API Documentation
     */
    default CreateIntegrationAssociationResponse createIntegrationAssociation(
            Consumer createIntegrationAssociationRequest)
            throws DuplicateResourceException, ResourceNotFoundException, InternalServiceException, InvalidRequestException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return createIntegrationAssociation(CreateIntegrationAssociationRequest.builder()
                .applyMutation(createIntegrationAssociationRequest).build());
    }

    /**
     * 
     * Adds a new participant into an on-going chat contact. For more information, see Customize chat flow
     * experiences by integrating custom participants.
     * 
     *
     * @param createParticipantRequest
     * @return Result of the CreateParticipant operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateParticipant
     * @see AWS API
     *      Documentation
     */
    default CreateParticipantResponse createParticipant(CreateParticipantRequest createParticipantRequest)
            throws InvalidRequestException, ResourceNotFoundException, InternalServiceException, ServiceQuotaExceededException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Adds a new participant into an on-going chat contact. For more information, see Customize chat flow
     * experiences by integrating custom participants.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateParticipantRequest.Builder} avoiding the need
     * to create one manually via {@link CreateParticipantRequest#builder()}
     * 
     *
     * @param createParticipantRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateParticipantRequest.Builder} to create a
     *        request.
     * @return Result of the CreateParticipant operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateParticipant
     * @see AWS API
     *      Documentation
     */
    default CreateParticipantResponse createParticipant(Consumer createParticipantRequest)
            throws InvalidRequestException, ResourceNotFoundException, InternalServiceException, ServiceQuotaExceededException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return createParticipant(CreateParticipantRequest.builder().applyMutation(createParticipantRequest).build());
    }

    /**
     * 
     * Enables rehydration of chats for the lifespan of a contact. For more information about chat rehydration, see Enable persistent chat in
     * the Amazon Connect Administrator Guide.
     * 
     *
     * @param createPersistentContactAssociationRequest
     * @return Result of the CreatePersistentContactAssociation operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreatePersistentContactAssociation
     * @see AWS API Documentation
     */
    default CreatePersistentContactAssociationResponse createPersistentContactAssociation(
            CreatePersistentContactAssociationRequest createPersistentContactAssociationRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, AccessDeniedException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Enables rehydration of chats for the lifespan of a contact. For more information about chat rehydration, see Enable persistent chat in
     * the Amazon Connect Administrator Guide.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreatePersistentContactAssociationRequest.Builder}
     * avoiding the need to create one manually via {@link CreatePersistentContactAssociationRequest#builder()}
     * 
     *
     * @param createPersistentContactAssociationRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreatePersistentContactAssociationRequest.Builder} to
     *        create a request.
     * @return Result of the CreatePersistentContactAssociation operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreatePersistentContactAssociation
     * @see AWS API Documentation
     */
    default CreatePersistentContactAssociationResponse createPersistentContactAssociation(
            Consumer createPersistentContactAssociationRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, AccessDeniedException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return createPersistentContactAssociation(CreatePersistentContactAssociationRequest.builder()
                .applyMutation(createPersistentContactAssociationRequest).build());
    }

    /**
     * 
     * Creates a new predefined attribute for the specified Amazon Connect instance. Predefined attributes are
     * attributes in an Amazon Connect instance that can be used to route contacts to an agent or pools of agents within
     * a queue. For more information, see Create predefined
     * attributes for routing contacts to agents.
     * 
     *
     * @param createPredefinedAttributeRequest
     * @return Result of the CreatePredefinedAttribute operation returned by the service.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreatePredefinedAttribute
     * @see AWS API Documentation
     */
    default CreatePredefinedAttributeResponse createPredefinedAttribute(
            CreatePredefinedAttributeRequest createPredefinedAttributeRequest) throws DuplicateResourceException,
            InvalidRequestException, InvalidParameterException, LimitExceededException, ResourceNotFoundException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Creates a new predefined attribute for the specified Amazon Connect instance. Predefined attributes are
     * attributes in an Amazon Connect instance that can be used to route contacts to an agent or pools of agents within
     * a queue. For more information, see Create predefined
     * attributes for routing contacts to agents.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreatePredefinedAttributeRequest.Builder} avoiding
     * the need to create one manually via {@link CreatePredefinedAttributeRequest#builder()}
     * 
     *
     * @param createPredefinedAttributeRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreatePredefinedAttributeRequest.Builder} to create a
     *        request.
     * @return Result of the CreatePredefinedAttribute operation returned by the service.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreatePredefinedAttribute
     * @see AWS API Documentation
     */
    default CreatePredefinedAttributeResponse createPredefinedAttribute(
            Consumer createPredefinedAttributeRequest)
            throws DuplicateResourceException, InvalidRequestException, InvalidParameterException, LimitExceededException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        return createPredefinedAttribute(CreatePredefinedAttributeRequest.builder()
                .applyMutation(createPredefinedAttributeRequest).build());
    }

    /**
     * 
     * Creates a prompt. For more information about prompts, such as supported file types and maximum length, see Create prompts in the Amazon
     * Connect Administrator Guide.
     * 
     *
     * @param createPromptRequest
     * @return Result of the CreatePrompt operation returned by the service.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreatePrompt
     * @see AWS API
     *      Documentation
     */
    default CreatePromptResponse createPrompt(CreatePromptRequest createPromptRequest) throws DuplicateResourceException,
            InvalidRequestException, InvalidParameterException, LimitExceededException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Creates a prompt. For more information about prompts, such as supported file types and maximum length, see Create prompts in the Amazon
     * Connect Administrator Guide.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreatePromptRequest.Builder} avoiding the need to
     * create one manually via {@link CreatePromptRequest#builder()}
     * 
     *
     * @param createPromptRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreatePromptRequest.Builder} to create a request.
     * @return Result of the CreatePrompt operation returned by the service.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreatePrompt
     * @see AWS API
     *      Documentation
     */
    default CreatePromptResponse createPrompt(Consumer createPromptRequest)
            throws DuplicateResourceException, InvalidRequestException, InvalidParameterException, LimitExceededException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return createPrompt(CreatePromptRequest.builder().applyMutation(createPromptRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Creates a new queue for the specified Amazon Connect instance.
     * 
     * 
     * 
     * 
     * 
     * If the phone number is claimed to a traffic distribution group that was created in the same Region as the Amazon
     * Connect instance where you are calling this API, then you can use a full phone number ARN or a UUID for
     * OutboundCallerIdNumberId. However, if the phone number is claimed to a traffic distribution group
     * that is in one Region, and you are calling this API from an instance in another Amazon Web Services Region that
     * is associated with the traffic distribution group, you must provide a full phone number ARN. If a UUID is
     * provided in this scenario, you will receive a ResourceNotFoundException.
     * 
     * 
     * 
     * 
     * Only use the phone number ARN format that doesn't contain instance in the path, for example,
     * arn:aws:connect:us-east-1:1234567890:phone-number/uuid. This is the same ARN format that is returned
     * when you call the ListPhoneNumbersV2
     * API.
     * 
     * 
     * 
     * 
     * If you plan to use IAM policies to allow/deny access to this API for phone number resources claimed to a traffic
     * distribution group, see Allow or Deny queue API actions for phone numbers in a replica Region.
     * 
     * 
     * 
     * 
     *
     * @param createQueueRequest
     * @return Result of the CreateQueue operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateQueue
     * @see AWS API
     *      Documentation
     */
    default CreateQueueResponse createQueue(CreateQueueRequest createQueueRequest) throws InvalidRequestException,
            InvalidParameterException, DuplicateResourceException, ResourceNotFoundException, LimitExceededException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Creates a new queue for the specified Amazon Connect instance.
     * 
     * 
     * 
     * 
     * 
     * If the phone number is claimed to a traffic distribution group that was created in the same Region as the Amazon
     * Connect instance where you are calling this API, then you can use a full phone number ARN or a UUID for
     * OutboundCallerIdNumberId. However, if the phone number is claimed to a traffic distribution group
     * that is in one Region, and you are calling this API from an instance in another Amazon Web Services Region that
     * is associated with the traffic distribution group, you must provide a full phone number ARN. If a UUID is
     * provided in this scenario, you will receive a ResourceNotFoundException.
     * 
     * 
     * 
     * 
     * Only use the phone number ARN format that doesn't contain instance in the path, for example,
     * arn:aws:connect:us-east-1:1234567890:phone-number/uuid. This is the same ARN format that is returned
     * when you call the ListPhoneNumbersV2
     * API.
     * 
     * 
     * 
     * 
     * If you plan to use IAM policies to allow/deny access to this API for phone number resources claimed to a traffic
     * distribution group, see Allow or Deny queue API actions for phone numbers in a replica Region.
     * 
     * 
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateQueueRequest.Builder} avoiding the need to
     * create one manually via {@link CreateQueueRequest#builder()}
     * 
     *
     * @param createQueueRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateQueueRequest.Builder} to create a request.
     * @return Result of the CreateQueue operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateQueue
     * @see AWS API
     *      Documentation
     */
    default CreateQueueResponse createQueue(Consumer createQueueRequest)
            throws InvalidRequestException, InvalidParameterException, DuplicateResourceException, ResourceNotFoundException,
            LimitExceededException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        return createQueue(CreateQueueRequest.builder().applyMutation(createQueueRequest).build());
    }

    /**
     * 
     * Creates a quick connect for the specified Amazon Connect instance.
     * 
     *
     * @param createQuickConnectRequest
     * @return Result of the CreateQuickConnect operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateQuickConnect
     * @see AWS
     *      API Documentation
     */
    default CreateQuickConnectResponse createQuickConnect(CreateQuickConnectRequest createQuickConnectRequest)
            throws InvalidRequestException, InvalidParameterException, DuplicateResourceException, ResourceNotFoundException,
            LimitExceededException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Creates a quick connect for the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateQuickConnectRequest.Builder} avoiding the
     * need to create one manually via {@link CreateQuickConnectRequest#builder()}
     * 
     *
     * @param createQuickConnectRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateQuickConnectRequest.Builder} to create a
     *        request.
     * @return Result of the CreateQuickConnect operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateQuickConnect
     * @see AWS
     *      API Documentation
     */
    default CreateQuickConnectResponse createQuickConnect(Consumer createQuickConnectRequest)
            throws InvalidRequestException, InvalidParameterException, DuplicateResourceException, ResourceNotFoundException,
            LimitExceededException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        return createQuickConnect(CreateQuickConnectRequest.builder().applyMutation(createQuickConnectRequest).build());
    }

    /**
     * 
     * Creates a new routing profile.
     * 
     *
     * @param createRoutingProfileRequest
     * @return Result of the CreateRoutingProfile operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateRoutingProfile
     * @see AWS
     *      API Documentation
     */
    default CreateRoutingProfileResponse createRoutingProfile(CreateRoutingProfileRequest createRoutingProfileRequest)
            throws InvalidRequestException, InvalidParameterException, DuplicateResourceException, ResourceNotFoundException,
            LimitExceededException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Creates a new routing profile.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateRoutingProfileRequest.Builder} avoiding the
     * need to create one manually via {@link CreateRoutingProfileRequest#builder()}
     * 
     *
     * @param createRoutingProfileRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateRoutingProfileRequest.Builder} to create a
     *        request.
     * @return Result of the CreateRoutingProfile operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateRoutingProfile
     * @see AWS
     *      API Documentation
     */
    default CreateRoutingProfileResponse createRoutingProfile(
            Consumer createRoutingProfileRequest) throws InvalidRequestException,
            InvalidParameterException, DuplicateResourceException, ResourceNotFoundException, LimitExceededException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return createRoutingProfile(CreateRoutingProfileRequest.builder().applyMutation(createRoutingProfileRequest).build());
    }

    /**
     * 
     * Creates a rule for the specified Amazon Connect instance.
     * 
     * 
     * Use the Rules
     * Function language to code conditions for the rule.
     * 
     *
     * @param createRuleRequest
     * @return Result of the CreateRule operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateRule
     * @see AWS API
     *      Documentation
     */
    default CreateRuleResponse createRule(CreateRuleRequest createRuleRequest) throws InvalidRequestException,
            ResourceNotFoundException, InternalServiceException, ThrottlingException, AccessDeniedException,
            ResourceConflictException, ServiceQuotaExceededException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Creates a rule for the specified Amazon Connect instance.
     * 
     * 
     * Use the Rules
     * Function language to code conditions for the rule.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateRuleRequest.Builder} avoiding the need to
     * create one manually via {@link CreateRuleRequest#builder()}
     * 
     *
     * @param createRuleRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateRuleRequest.Builder} to create a request.
     * @return Result of the CreateRule operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateRule
     * @see AWS API
     *      Documentation
     */
    default CreateRuleResponse createRule(Consumer createRuleRequest) throws InvalidRequestException,
            ResourceNotFoundException, InternalServiceException, ThrottlingException, AccessDeniedException,
            ResourceConflictException, ServiceQuotaExceededException, AwsServiceException, SdkClientException, ConnectException {
        return createRule(CreateRuleRequest.builder().applyMutation(createRuleRequest).build());
    }

    /**
     * 
     * Creates a security profile.
     * 
     * 
     * For information about security profiles, see Security Profiles
     * in the Amazon Connect Administrator Guide. For a mapping of the API name and user interface name of the
     * security profile permissions, see List of security profile
     * permissions.
     * 
     *
     * @param createSecurityProfileRequest
     * @return Result of the CreateSecurityProfile operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateSecurityProfile
     * @see AWS
     *      API Documentation
     */
    default CreateSecurityProfileResponse createSecurityProfile(CreateSecurityProfileRequest createSecurityProfileRequest)
            throws InvalidRequestException, InvalidParameterException, LimitExceededException, DuplicateResourceException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Creates a security profile.
     * 
     * 
     * For information about security profiles, see Security Profiles
     * in the Amazon Connect Administrator Guide. For a mapping of the API name and user interface name of the
     * security profile permissions, see List of security profile
     * permissions.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateSecurityProfileRequest.Builder} avoiding the
     * need to create one manually via {@link CreateSecurityProfileRequest#builder()}
     * 
     *
     * @param createSecurityProfileRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateSecurityProfileRequest.Builder} to create a
     *        request.
     * @return Result of the CreateSecurityProfile operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateSecurityProfile
     * @see AWS
     *      API Documentation
     */
    default CreateSecurityProfileResponse createSecurityProfile(
            Consumer createSecurityProfileRequest) throws InvalidRequestException,
            InvalidParameterException, LimitExceededException, DuplicateResourceException, ResourceNotFoundException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return createSecurityProfile(CreateSecurityProfileRequest.builder().applyMutation(createSecurityProfileRequest).build());
    }

    /**
     * 
     * Creates a new task template in the specified Amazon Connect instance.
     * 
     *
     * @param createTaskTemplateRequest
     * @return Result of the CreateTaskTemplate operation returned by the service.
     * @throws PropertyValidationException
     *         The property is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateTaskTemplate
     * @see AWS
     *      API Documentation
     */
    default CreateTaskTemplateResponse createTaskTemplate(CreateTaskTemplateRequest createTaskTemplateRequest)
            throws PropertyValidationException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            ServiceQuotaExceededException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Creates a new task template in the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateTaskTemplateRequest.Builder} avoiding the
     * need to create one manually via {@link CreateTaskTemplateRequest#builder()}
     * 
     *
     * @param createTaskTemplateRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateTaskTemplateRequest.Builder} to create a
     *        request.
     * @return Result of the CreateTaskTemplate operation returned by the service.
     * @throws PropertyValidationException
     *         The property is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateTaskTemplate
     * @see AWS
     *      API Documentation
     */
    default CreateTaskTemplateResponse createTaskTemplate(Consumer createTaskTemplateRequest)
            throws PropertyValidationException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            ServiceQuotaExceededException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return createTaskTemplate(CreateTaskTemplateRequest.builder().applyMutation(createTaskTemplateRequest).build());
    }

    /**
     * 
     * Creates a traffic distribution group given an Amazon Connect instance that has been replicated.
     * 
     * 
     * 
     * The SignInConfig distribution is available only on a default TrafficDistributionGroup
     * (see the IsDefault parameter in the TrafficDistributionGroup data type). If you call UpdateTrafficDistribution with a modified
     * SignInConfig and a non-default TrafficDistributionGroup, an
     * InvalidRequestException is returned.
     * 
     * 
     * 
     * For more information about creating traffic distribution groups, see Set up
     * traffic distribution groups in the Amazon Connect Administrator Guide.
     * 
     *
     * @param createTrafficDistributionGroupRequest
     * @return Result of the CreateTrafficDistributionGroup operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws ResourceNotReadyException
     *         The resource is not ready.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateTrafficDistributionGroup
     * @see AWS API Documentation
     */
    default CreateTrafficDistributionGroupResponse createTrafficDistributionGroup(
            CreateTrafficDistributionGroupRequest createTrafficDistributionGroupRequest) throws InvalidRequestException,
            AccessDeniedException, ServiceQuotaExceededException, ThrottlingException, ResourceNotFoundException,
            InternalServiceException, ResourceConflictException, ResourceNotReadyException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Creates a traffic distribution group given an Amazon Connect instance that has been replicated.
     * 
     * 
     * 
     * The SignInConfig distribution is available only on a default TrafficDistributionGroup
     * (see the IsDefault parameter in the TrafficDistributionGroup data type). If you call UpdateTrafficDistribution with a modified
     * SignInConfig and a non-default TrafficDistributionGroup, an
     * InvalidRequestException is returned.
     * 
     * 
     * 
     * For more information about creating traffic distribution groups, see Set up
     * traffic distribution groups in the Amazon Connect Administrator Guide.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateTrafficDistributionGroupRequest.Builder}
     * avoiding the need to create one manually via {@link CreateTrafficDistributionGroupRequest#builder()}
     * 
     *
     * @param createTrafficDistributionGroupRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateTrafficDistributionGroupRequest.Builder} to
     *        create a request.
     * @return Result of the CreateTrafficDistributionGroup operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws ResourceNotReadyException
     *         The resource is not ready.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateTrafficDistributionGroup
     * @see AWS API Documentation
     */
    default CreateTrafficDistributionGroupResponse createTrafficDistributionGroup(
            Consumer createTrafficDistributionGroupRequest)
            throws InvalidRequestException, AccessDeniedException, ServiceQuotaExceededException, ThrottlingException,
            ResourceNotFoundException, InternalServiceException, ResourceConflictException, ResourceNotReadyException,
            AwsServiceException, SdkClientException, ConnectException {
        return createTrafficDistributionGroup(CreateTrafficDistributionGroupRequest.builder()
                .applyMutation(createTrafficDistributionGroupRequest).build());
    }

    /**
     * 
     * Creates a use case for an integration association.
     * 
     *
     * @param createUseCaseRequest
     * @return Result of the CreateUseCase operation returned by the service.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateUseCase
     * @see AWS API
     *      Documentation
     */
    default CreateUseCaseResponse createUseCase(CreateUseCaseRequest createUseCaseRequest) throws DuplicateResourceException,
            ResourceNotFoundException, InternalServiceException, InvalidRequestException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Creates a use case for an integration association.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateUseCaseRequest.Builder} avoiding the need to
     * create one manually via {@link CreateUseCaseRequest#builder()}
     * 
     *
     * @param createUseCaseRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateUseCaseRequest.Builder} to create a request.
     * @return Result of the CreateUseCase operation returned by the service.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateUseCase
     * @see AWS API
     *      Documentation
     */
    default CreateUseCaseResponse createUseCase(Consumer createUseCaseRequest)
            throws DuplicateResourceException, ResourceNotFoundException, InternalServiceException, InvalidRequestException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return createUseCase(CreateUseCaseRequest.builder().applyMutation(createUseCaseRequest).build());
    }

    /**
     * 
     * Creates a user account for the specified Amazon Connect instance.
     * 
     * 
     * 
     * Certain UserIdentityInfo
     * parameters are required in some situations. For example, Email is required if you are using SAML for
     * identity management. FirstName and LastName are required if you are using Amazon
     * Connect or SAML for identity management.
     * 
     * 
     * 
     * For information about how to create users using the Amazon Connect admin website, see Add Users in the Amazon
     * Connect Administrator Guide.
     * 
     *
     * @param createUserRequest
     * @return Result of the CreateUser operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateUser
     * @see AWS API
     *      Documentation
     */
    default CreateUserResponse createUser(CreateUserRequest createUserRequest) throws InvalidRequestException,
            InvalidParameterException, LimitExceededException, DuplicateResourceException, ResourceNotFoundException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Creates a user account for the specified Amazon Connect instance.
     * 
     * 
     * 
     * Certain UserIdentityInfo
     * parameters are required in some situations. For example, Email is required if you are using SAML for
     * identity management. FirstName and LastName are required if you are using Amazon
     * Connect or SAML for identity management.
     * 
     * 
     * 
     * For information about how to create users using the Amazon Connect admin website, see Add Users in the Amazon
     * Connect Administrator Guide.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateUserRequest.Builder} avoiding the need to
     * create one manually via {@link CreateUserRequest#builder()}
     * 
     *
     * @param createUserRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateUserRequest.Builder} to create a request.
     * @return Result of the CreateUser operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateUser
     * @see AWS API
     *      Documentation
     */
    default CreateUserResponse createUser(Consumer createUserRequest) throws InvalidRequestException,
            InvalidParameterException, LimitExceededException, DuplicateResourceException, ResourceNotFoundException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return createUser(CreateUserRequest.builder().applyMutation(createUserRequest).build());
    }

    /**
     * 
     * Creates a new user hierarchy group.
     * 
     *
     * @param createUserHierarchyGroupRequest
     * @return Result of the CreateUserHierarchyGroup operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateUserHierarchyGroup
     * @see AWS API Documentation
     */
    default CreateUserHierarchyGroupResponse createUserHierarchyGroup(
            CreateUserHierarchyGroupRequest createUserHierarchyGroupRequest) throws InvalidRequestException,
            InvalidParameterException, DuplicateResourceException, LimitExceededException, ResourceNotFoundException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Creates a new user hierarchy group.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateUserHierarchyGroupRequest.Builder} avoiding
     * the need to create one manually via {@link CreateUserHierarchyGroupRequest#builder()}
     * 
     *
     * @param createUserHierarchyGroupRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateUserHierarchyGroupRequest.Builder} to create a
     *        request.
     * @return Result of the CreateUserHierarchyGroup operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateUserHierarchyGroup
     * @see AWS API Documentation
     */
    default CreateUserHierarchyGroupResponse createUserHierarchyGroup(
            Consumer createUserHierarchyGroupRequest) throws InvalidRequestException,
            InvalidParameterException, DuplicateResourceException, LimitExceededException, ResourceNotFoundException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return createUserHierarchyGroup(CreateUserHierarchyGroupRequest.builder().applyMutation(createUserHierarchyGroupRequest)
                .build());
    }

    /**
     * 
     * Creates a new view with the possible status of SAVED or PUBLISHED.
     * 
     * 
     * The views will have a unique name for each connect instance.
     * 
     * 
     * It performs basic content validation if the status is SAVED or full content validation if the status
     * is set to PUBLISHED. An error is returned if validation fails. It associates either the
     * $SAVED qualifier or both of the $SAVED and $LATEST qualifiers
     * with the provided view content based on the status. The view is idempotent if ClientToken is provided.
     * 
     *
     * @param createViewRequest
     * @return Result of the CreateView operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateView
     * @see AWS API
     *      Documentation
     */
    default CreateViewResponse createView(CreateViewRequest createViewRequest) throws AccessDeniedException,
            InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            DuplicateResourceException, ServiceQuotaExceededException, TooManyRequestsException, ResourceInUseException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Creates a new view with the possible status of SAVED or PUBLISHED.
     * 
     * 
     * The views will have a unique name for each connect instance.
     * 
     * 
     * It performs basic content validation if the status is SAVED or full content validation if the status
     * is set to PUBLISHED. An error is returned if validation fails. It associates either the
     * $SAVED qualifier or both of the $SAVED and $LATEST qualifiers
     * with the provided view content based on the status. The view is idempotent if ClientToken is provided.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateViewRequest.Builder} avoiding the need to
     * create one manually via {@link CreateViewRequest#builder()}
     * 
     *
     * @param createViewRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateViewRequest.Builder} to create a request.
     * @return Result of the CreateView operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateView
     * @see AWS API
     *      Documentation
     */
    default CreateViewResponse createView(Consumer createViewRequest) throws AccessDeniedException,
            InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            DuplicateResourceException, ServiceQuotaExceededException, TooManyRequestsException, ResourceInUseException,
            AwsServiceException, SdkClientException, ConnectException {
        return createView(CreateViewRequest.builder().applyMutation(createViewRequest).build());
    }

    /**
     * 
     * Publishes a new version of the view identifier.
     * 
     * 
     * Versions are immutable and monotonically increasing.
     * 
     * 
     * It returns the highest version if there is no change in content compared to that version. An error is displayed
     * if the supplied ViewContentSha256 is different from the ViewContentSha256 of the $LATEST alias.
     * 
     *
     * @param createViewVersionRequest
     * @return Result of the CreateViewVersion operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateViewVersion
     * @see AWS API
     *      Documentation
     */
    default CreateViewVersionResponse createViewVersion(CreateViewVersionRequest createViewVersionRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            InternalServiceException, TooManyRequestsException, ServiceQuotaExceededException, ResourceInUseException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Publishes a new version of the view identifier.
     * 
     * 
     * Versions are immutable and monotonically increasing.
     * 
     * 
     * It returns the highest version if there is no change in content compared to that version. An error is displayed
     * if the supplied ViewContentSha256 is different from the ViewContentSha256 of the $LATEST alias.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateViewVersionRequest.Builder} avoiding the need
     * to create one manually via {@link CreateViewVersionRequest#builder()}
     * 
     *
     * @param createViewVersionRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateViewVersionRequest.Builder} to create a
     *        request.
     * @return Result of the CreateViewVersion operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateViewVersion
     * @see AWS API
     *      Documentation
     */
    default CreateViewVersionResponse createViewVersion(Consumer createViewVersionRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            InternalServiceException, TooManyRequestsException, ServiceQuotaExceededException, ResourceInUseException,
            AwsServiceException, SdkClientException, ConnectException {
        return createViewVersion(CreateViewVersionRequest.builder().applyMutation(createViewVersionRequest).build());
    }

    /**
     * 
     * Creates a custom vocabulary associated with your Amazon Connect instance. You can set a custom vocabulary to be
     * your default vocabulary for a given language. Contact Lens for Amazon Connect uses the default vocabulary in
     * post-call and real-time contact analysis sessions for that language.
     * 
     *
     * @param createVocabularyRequest
     * @return Result of the CreateVocabulary operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateVocabulary
     * @see AWS API
     *      Documentation
     */
    default CreateVocabularyResponse createVocabulary(CreateVocabularyRequest createVocabularyRequest)
            throws InvalidRequestException, ResourceNotFoundException, InternalServiceException, ThrottlingException,
            AccessDeniedException, ResourceConflictException, ServiceQuotaExceededException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Creates a custom vocabulary associated with your Amazon Connect instance. You can set a custom vocabulary to be
     * your default vocabulary for a given language. Contact Lens for Amazon Connect uses the default vocabulary in
     * post-call and real-time contact analysis sessions for that language.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link CreateVocabularyRequest.Builder} avoiding the need
     * to create one manually via {@link CreateVocabularyRequest#builder()}
     * 
     *
     * @param createVocabularyRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.CreateVocabularyRequest.Builder} to create a request.
     * @return Result of the CreateVocabulary operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.CreateVocabulary
     * @see AWS API
     *      Documentation
     */
    default CreateVocabularyResponse createVocabulary(Consumer createVocabularyRequest)
            throws InvalidRequestException, ResourceNotFoundException, InternalServiceException, ThrottlingException,
            AccessDeniedException, ResourceConflictException, ServiceQuotaExceededException, AwsServiceException,
            SdkClientException, ConnectException {
        return createVocabulary(CreateVocabularyRequest.builder().applyMutation(createVocabularyRequest).build());
    }

    /**
     * 
     * Deactivates an evaluation form in the specified Amazon Connect instance. After a form is deactivated, it is no
     * longer available for users to start new evaluations based on the form.
     * 
     *
     * @param deactivateEvaluationFormRequest
     * @return Result of the DeactivateEvaluationForm operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeactivateEvaluationForm
     * @see AWS API Documentation
     */
    default DeactivateEvaluationFormResponse deactivateEvaluationForm(
            DeactivateEvaluationFormRequest deactivateEvaluationFormRequest) throws InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, ResourceConflictException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deactivates an evaluation form in the specified Amazon Connect instance. After a form is deactivated, it is no
     * longer available for users to start new evaluations based on the form.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeactivateEvaluationFormRequest.Builder} avoiding
     * the need to create one manually via {@link DeactivateEvaluationFormRequest#builder()}
     * 
     *
     * @param deactivateEvaluationFormRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeactivateEvaluationFormRequest.Builder} to create a
     *        request.
     * @return Result of the DeactivateEvaluationForm operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeactivateEvaluationForm
     * @see AWS API Documentation
     */
    default DeactivateEvaluationFormResponse deactivateEvaluationForm(
            Consumer deactivateEvaluationFormRequest) throws InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, ResourceConflictException,
            AwsServiceException, SdkClientException, ConnectException {
        return deactivateEvaluationForm(DeactivateEvaluationFormRequest.builder().applyMutation(deactivateEvaluationFormRequest)
                .build());
    }

    /**
     * 
     * Deletes an attached file along with the underlying S3 Object.
     * 
     * 
     * 
     * The attached file is permanently deleted if S3 bucket versioning is not enabled.
     * 
     * 
     *
     * @param deleteAttachedFileRequest
     *        Request to DeleteAttachedFile API
     * @return Result of the DeleteAttachedFile operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteAttachedFile
     * @see AWS
     *      API Documentation
     */
    default DeleteAttachedFileResponse deleteAttachedFile(DeleteAttachedFileRequest deleteAttachedFileRequest)
            throws AccessDeniedException, InvalidRequestException, InternalServiceException, ResourceNotFoundException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes an attached file along with the underlying S3 Object.
     * 
     * 
     * 
     * The attached file is permanently deleted if S3 bucket versioning is not enabled.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteAttachedFileRequest.Builder} avoiding the
     * need to create one manually via {@link DeleteAttachedFileRequest#builder()}
     * 
     *
     * @param deleteAttachedFileRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteAttachedFileRequest.Builder} to create a
     *        request. Request to DeleteAttachedFile API
     * @return Result of the DeleteAttachedFile operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteAttachedFile
     * @see AWS
     *      API Documentation
     */
    default DeleteAttachedFileResponse deleteAttachedFile(Consumer deleteAttachedFileRequest)
            throws AccessDeniedException, InvalidRequestException, InternalServiceException, ResourceNotFoundException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return deleteAttachedFile(DeleteAttachedFileRequest.builder().applyMutation(deleteAttachedFileRequest).build());
    }

    /**
     * 
     * Deletes a contact evaluation in the specified Amazon Connect instance.
     * 
     *
     * @param deleteContactEvaluationRequest
     * @return Result of the DeleteContactEvaluation operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteContactEvaluation
     * @see AWS API Documentation
     */
    default DeleteContactEvaluationResponse deleteContactEvaluation(DeleteContactEvaluationRequest deleteContactEvaluationRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            ResourceConflictException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes a contact evaluation in the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteContactEvaluationRequest.Builder} avoiding
     * the need to create one manually via {@link DeleteContactEvaluationRequest#builder()}
     * 
     *
     * @param deleteContactEvaluationRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteContactEvaluationRequest.Builder} to create a
     *        request.
     * @return Result of the DeleteContactEvaluation operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteContactEvaluation
     * @see AWS API Documentation
     */
    default DeleteContactEvaluationResponse deleteContactEvaluation(
            Consumer deleteContactEvaluationRequest) throws InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, ResourceConflictException,
            AwsServiceException, SdkClientException, ConnectException {
        return deleteContactEvaluation(DeleteContactEvaluationRequest.builder().applyMutation(deleteContactEvaluationRequest)
                .build());
    }

    /**
     * 
     * Deletes a flow for the specified Amazon Connect instance.
     * 
     *
     * @param deleteContactFlowRequest
     * @return Result of the DeleteContactFlow operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteContactFlow
     * @see AWS API
     *      Documentation
     */
    default DeleteContactFlowResponse deleteContactFlow(DeleteContactFlowRequest deleteContactFlowRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            InternalServiceException, ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes a flow for the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteContactFlowRequest.Builder} avoiding the need
     * to create one manually via {@link DeleteContactFlowRequest#builder()}
     * 
     *
     * @param deleteContactFlowRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteContactFlowRequest.Builder} to create a
     *        request.
     * @return Result of the DeleteContactFlow operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteContactFlow
     * @see AWS API
     *      Documentation
     */
    default DeleteContactFlowResponse deleteContactFlow(Consumer deleteContactFlowRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            InternalServiceException, ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return deleteContactFlow(DeleteContactFlowRequest.builder().applyMutation(deleteContactFlowRequest).build());
    }

    /**
     * 
     * Deletes the specified flow module.
     * 
     *
     * @param deleteContactFlowModuleRequest
     * @return Result of the DeleteContactFlowModule operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteContactFlowModule
     * @see AWS API Documentation
     */
    default DeleteContactFlowModuleResponse deleteContactFlowModule(DeleteContactFlowModuleRequest deleteContactFlowModuleRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes the specified flow module.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteContactFlowModuleRequest.Builder} avoiding
     * the need to create one manually via {@link DeleteContactFlowModuleRequest#builder()}
     * 
     *
     * @param deleteContactFlowModuleRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteContactFlowModuleRequest.Builder} to create a
     *        request.
     * @return Result of the DeleteContactFlowModule operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteContactFlowModule
     * @see AWS API Documentation
     */
    default DeleteContactFlowModuleResponse deleteContactFlowModule(
            Consumer deleteContactFlowModuleRequest) throws AccessDeniedException,
            InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return deleteContactFlowModule(DeleteContactFlowModuleRequest.builder().applyMutation(deleteContactFlowModuleRequest)
                .build());
    }

    /**
     * 
     * Deletes an evaluation form in the specified Amazon Connect instance.
     * 
     * 
     * 
     * 
     * If the version property is provided, only the specified version of the evaluation form is deleted.
     * 
     * 
     * 
     * 
     * If no version is provided, then the full form (all versions) is deleted.
     * 
     * 
     * 
     *
     * @param deleteEvaluationFormRequest
     * @return Result of the DeleteEvaluationForm operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteEvaluationForm
     * @see AWS
     *      API Documentation
     */
    default DeleteEvaluationFormResponse deleteEvaluationForm(DeleteEvaluationFormRequest deleteEvaluationFormRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            ResourceConflictException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes an evaluation form in the specified Amazon Connect instance.
     * 
     * 
     * 
     * 
     * If the version property is provided, only the specified version of the evaluation form is deleted.
     * 
     * 
     * 
     * 
     * If no version is provided, then the full form (all versions) is deleted.
     * 
     * 
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteEvaluationFormRequest.Builder} avoiding the
     * need to create one manually via {@link DeleteEvaluationFormRequest#builder()}
     * 
     *
     * @param deleteEvaluationFormRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteEvaluationFormRequest.Builder} to create a
     *        request.
     * @return Result of the DeleteEvaluationForm operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteEvaluationForm
     * @see AWS
     *      API Documentation
     */
    default DeleteEvaluationFormResponse deleteEvaluationForm(
            Consumer deleteEvaluationFormRequest) throws InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, ResourceConflictException,
            AwsServiceException, SdkClientException, ConnectException {
        return deleteEvaluationForm(DeleteEvaluationFormRequest.builder().applyMutation(deleteEvaluationFormRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Deletes an hours of operation.
     * 
     *
     * @param deleteHoursOfOperationRequest
     * @return Result of the DeleteHoursOfOperation operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteHoursOfOperation
     * @see AWS API Documentation
     */
    default DeleteHoursOfOperationResponse deleteHoursOfOperation(DeleteHoursOfOperationRequest deleteHoursOfOperationRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Deletes an hours of operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteHoursOfOperationRequest.Builder} avoiding the
     * need to create one manually via {@link DeleteHoursOfOperationRequest#builder()}
     * 
     *
     * @param deleteHoursOfOperationRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteHoursOfOperationRequest.Builder} to create a
     *        request.
     * @return Result of the DeleteHoursOfOperation operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteHoursOfOperation
     * @see AWS API Documentation
     */
    default DeleteHoursOfOperationResponse deleteHoursOfOperation(
            Consumer deleteHoursOfOperationRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return deleteHoursOfOperation(DeleteHoursOfOperationRequest.builder().applyMutation(deleteHoursOfOperationRequest)
                .build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Deletes the Amazon Connect instance. For more information, see Delete your Amazon
     * Connect instance in the Amazon Connect Administrator Guide.
     * 
     * 
     * Amazon Connect enforces a limit on the total number of instances that you can create or delete in 30 days. If you
     * exceed this limit, you will get an error message indicating there has been an excessive number of attempts at
     * creating or deleting instances. You must wait 30 days before you can restart creating and deleting instances in
     * your account.
     * 
     *
     * @param deleteInstanceRequest
     * @return Result of the DeleteInstance operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteInstance
     * @see AWS API
     *      Documentation
     */
    default DeleteInstanceResponse deleteInstance(DeleteInstanceRequest deleteInstanceRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Deletes the Amazon Connect instance. For more information, see Delete your Amazon
     * Connect instance in the Amazon Connect Administrator Guide.
     * 
     * 
     * Amazon Connect enforces a limit on the total number of instances that you can create or delete in 30 days. If you
     * exceed this limit, you will get an error message indicating there has been an excessive number of attempts at
     * creating or deleting instances. You must wait 30 days before you can restart creating and deleting instances in
     * your account.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteInstanceRequest.Builder} avoiding the need to
     * create one manually via {@link DeleteInstanceRequest#builder()}
     * 
     *
     * @param deleteInstanceRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteInstanceRequest.Builder} to create a request.
     * @return Result of the DeleteInstance operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteInstance
     * @see AWS API
     *      Documentation
     */
    default DeleteInstanceResponse deleteInstance(Consumer deleteInstanceRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, AwsServiceException,
            SdkClientException, ConnectException {
        return deleteInstance(DeleteInstanceRequest.builder().applyMutation(deleteInstanceRequest).build());
    }

    /**
     * 
     * Deletes an Amazon Web Services resource association from an Amazon Connect instance. The association must not
     * have any use cases associated with it.
     * 
     *
     * @param deleteIntegrationAssociationRequest
     * @return Result of the DeleteIntegrationAssociation operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteIntegrationAssociation
     * @see AWS API Documentation
     */
    default DeleteIntegrationAssociationResponse deleteIntegrationAssociation(
            DeleteIntegrationAssociationRequest deleteIntegrationAssociationRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, ThrottlingException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes an Amazon Web Services resource association from an Amazon Connect instance. The association must not
     * have any use cases associated with it.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteIntegrationAssociationRequest.Builder}
     * avoiding the need to create one manually via {@link DeleteIntegrationAssociationRequest#builder()}
     * 
     *
     * @param deleteIntegrationAssociationRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteIntegrationAssociationRequest.Builder} to
     *        create a request.
     * @return Result of the DeleteIntegrationAssociation operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteIntegrationAssociation
     * @see AWS API Documentation
     */
    default DeleteIntegrationAssociationResponse deleteIntegrationAssociation(
            Consumer deleteIntegrationAssociationRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return deleteIntegrationAssociation(DeleteIntegrationAssociationRequest.builder()
                .applyMutation(deleteIntegrationAssociationRequest).build());
    }

    /**
     * 
     * Deletes a predefined attribute from the specified Amazon Connect instance.
     * 
     *
     * @param deletePredefinedAttributeRequest
     * @return Result of the DeletePredefinedAttribute operation returned by the service.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeletePredefinedAttribute
     * @see AWS API Documentation
     */
    default DeletePredefinedAttributeResponse deletePredefinedAttribute(
            DeletePredefinedAttributeRequest deletePredefinedAttributeRequest) throws ResourceInUseException,
            InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes a predefined attribute from the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeletePredefinedAttributeRequest.Builder} avoiding
     * the need to create one manually via {@link DeletePredefinedAttributeRequest#builder()}
     * 
     *
     * @param deletePredefinedAttributeRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeletePredefinedAttributeRequest.Builder} to create a
     *        request.
     * @return Result of the DeletePredefinedAttribute operation returned by the service.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeletePredefinedAttribute
     * @see AWS API Documentation
     */
    default DeletePredefinedAttributeResponse deletePredefinedAttribute(
            Consumer deletePredefinedAttributeRequest) throws ResourceInUseException,
            InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return deletePredefinedAttribute(DeletePredefinedAttributeRequest.builder()
                .applyMutation(deletePredefinedAttributeRequest).build());
    }

    /**
     * 
     * Deletes a prompt.
     * 
     *
     * @param deletePromptRequest
     * @return Result of the DeletePrompt operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeletePrompt
     * @see AWS API
     *      Documentation
     */
    default DeletePromptResponse deletePrompt(DeletePromptRequest deletePromptRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes a prompt.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeletePromptRequest.Builder} avoiding the need to
     * create one manually via {@link DeletePromptRequest#builder()}
     * 
     *
     * @param deletePromptRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeletePromptRequest.Builder} to create a request.
     * @return Result of the DeletePrompt operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeletePrompt
     * @see AWS API
     *      Documentation
     */
    default DeletePromptResponse deletePrompt(Consumer deletePromptRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return deletePrompt(DeletePromptRequest.builder().applyMutation(deletePromptRequest).build());
    }

    /**
     * 
     * Deletes a queue. It isn't possible to delete a queue by using the Amazon Connect admin website.
     * 
     *
     * @param deleteQueueRequest
     * @return Result of the DeleteQueue operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteQueue
     * @see AWS API
     *      Documentation
     */
    default DeleteQueueResponse deleteQueue(DeleteQueueRequest deleteQueueRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ResourceInUseException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes a queue. It isn't possible to delete a queue by using the Amazon Connect admin website.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteQueueRequest.Builder} avoiding the need to
     * create one manually via {@link DeleteQueueRequest#builder()}
     * 
     *
     * @param deleteQueueRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteQueueRequest.Builder} to create a request.
     * @return Result of the DeleteQueue operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteQueue
     * @see AWS API
     *      Documentation
     */
    default DeleteQueueResponse deleteQueue(Consumer deleteQueueRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ResourceInUseException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return deleteQueue(DeleteQueueRequest.builder().applyMutation(deleteQueueRequest).build());
    }

    /**
     * 
     * Deletes a quick connect.
     * 
     * 
     * 
     * After calling DeleteUser, it's important
     * to call DeleteQuickConnect to delete any records related to the deleted users. This will help you:
     * 
     * 
     * 
     * 
     * Avoid dangling resources that impact your service quotas.
     * 
     * 
     * 
     * 
     * Remove deleted users so they don't appear to agents as transfer options.
     * 
     * 
     * 
     * 
     * Avoid the disruption of other Amazon Connect processes, such as instance replication and syncing if you're using
     * Amazon
     * Connect Global Resiliency.
     * 
     * 
     * 
     * 
     *
     * @param deleteQuickConnectRequest
     * @return Result of the DeleteQuickConnect operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteQuickConnect
     * @see AWS
     *      API Documentation
     */
    default DeleteQuickConnectResponse deleteQuickConnect(DeleteQuickConnectRequest deleteQuickConnectRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes a quick connect.
     * 
     * 
     * 
     * After calling DeleteUser, it's important
     * to call DeleteQuickConnect to delete any records related to the deleted users. This will help you:
     * 
     * 
     * 
     * 
     * Avoid dangling resources that impact your service quotas.
     * 
     * 
     * 
     * 
     * Remove deleted users so they don't appear to agents as transfer options.
     * 
     * 
     * 
     * 
     * Avoid the disruption of other Amazon Connect processes, such as instance replication and syncing if you're using
     * Amazon
     * Connect Global Resiliency.
     * 
     * 
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteQuickConnectRequest.Builder} avoiding the
     * need to create one manually via {@link DeleteQuickConnectRequest#builder()}
     * 
     *
     * @param deleteQuickConnectRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteQuickConnectRequest.Builder} to create a
     *        request.
     * @return Result of the DeleteQuickConnect operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteQuickConnect
     * @see AWS
     *      API Documentation
     */
    default DeleteQuickConnectResponse deleteQuickConnect(Consumer deleteQuickConnectRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return deleteQuickConnect(DeleteQuickConnectRequest.builder().applyMutation(deleteQuickConnectRequest).build());
    }

    /**
     * 
     * Deletes a routing profile.
     * 
     *
     * @param deleteRoutingProfileRequest
     * @return Result of the DeleteRoutingProfile operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteRoutingProfile
     * @see AWS
     *      API Documentation
     */
    default DeleteRoutingProfileResponse deleteRoutingProfile(DeleteRoutingProfileRequest deleteRoutingProfileRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ResourceInUseException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes a routing profile.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteRoutingProfileRequest.Builder} avoiding the
     * need to create one manually via {@link DeleteRoutingProfileRequest#builder()}
     * 
     *
     * @param deleteRoutingProfileRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteRoutingProfileRequest.Builder} to create a
     *        request.
     * @return Result of the DeleteRoutingProfile operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteRoutingProfile
     * @see AWS
     *      API Documentation
     */
    default DeleteRoutingProfileResponse deleteRoutingProfile(
            Consumer deleteRoutingProfileRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ResourceInUseException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return deleteRoutingProfile(DeleteRoutingProfileRequest.builder().applyMutation(deleteRoutingProfileRequest).build());
    }

    /**
     * 
     * Deletes a rule for the specified Amazon Connect instance.
     * 
     *
     * @param deleteRuleRequest
     * @return Result of the DeleteRule operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteRule
     * @see AWS API
     *      Documentation
     */
    default DeleteRuleResponse deleteRule(DeleteRuleRequest deleteRuleRequest) throws InvalidRequestException,
            ResourceNotFoundException, InternalServiceException, ThrottlingException, AccessDeniedException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes a rule for the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteRuleRequest.Builder} avoiding the need to
     * create one manually via {@link DeleteRuleRequest#builder()}
     * 
     *
     * @param deleteRuleRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteRuleRequest.Builder} to create a request.
     * @return Result of the DeleteRule operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteRule
     * @see AWS API
     *      Documentation
     */
    default DeleteRuleResponse deleteRule(Consumer deleteRuleRequest) throws InvalidRequestException,
            ResourceNotFoundException, InternalServiceException, ThrottlingException, AccessDeniedException, AwsServiceException,
            SdkClientException, ConnectException {
        return deleteRule(DeleteRuleRequest.builder().applyMutation(deleteRuleRequest).build());
    }

    /**
     * 
     * Deletes a security profile.
     * 
     *
     * @param deleteSecurityProfileRequest
     * @return Result of the DeleteSecurityProfile operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteSecurityProfile
     * @see AWS
     *      API Documentation
     */
    default DeleteSecurityProfileResponse deleteSecurityProfile(DeleteSecurityProfileRequest deleteSecurityProfileRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AccessDeniedException, ResourceInUseException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes a security profile.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteSecurityProfileRequest.Builder} avoiding the
     * need to create one manually via {@link DeleteSecurityProfileRequest#builder()}
     * 
     *
     * @param deleteSecurityProfileRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteSecurityProfileRequest.Builder} to create a
     *        request.
     * @return Result of the DeleteSecurityProfile operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteSecurityProfile
     * @see AWS
     *      API Documentation
     */
    default DeleteSecurityProfileResponse deleteSecurityProfile(
            Consumer deleteSecurityProfileRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AccessDeniedException, ResourceInUseException, AwsServiceException, SdkClientException, ConnectException {
        return deleteSecurityProfile(DeleteSecurityProfileRequest.builder().applyMutation(deleteSecurityProfileRequest).build());
    }

    /**
     * 
     * Deletes the task template.
     * 
     *
     * @param deleteTaskTemplateRequest
     * @return Result of the DeleteTaskTemplate operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteTaskTemplate
     * @see AWS
     *      API Documentation
     */
    default DeleteTaskTemplateResponse deleteTaskTemplate(DeleteTaskTemplateRequest deleteTaskTemplateRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes the task template.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteTaskTemplateRequest.Builder} avoiding the
     * need to create one manually via {@link DeleteTaskTemplateRequest#builder()}
     * 
     *
     * @param deleteTaskTemplateRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteTaskTemplateRequest.Builder} to create a
     *        request.
     * @return Result of the DeleteTaskTemplate operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteTaskTemplate
     * @see AWS
     *      API Documentation
     */
    default DeleteTaskTemplateResponse deleteTaskTemplate(Consumer deleteTaskTemplateRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return deleteTaskTemplate(DeleteTaskTemplateRequest.builder().applyMutation(deleteTaskTemplateRequest).build());
    }

    /**
     * 
     * Deletes a traffic distribution group. This API can be called only in the Region where the traffic distribution
     * group is created.
     * 
     * 
     * For more information about deleting traffic distribution groups, see Delete
     * traffic distribution groups in the Amazon Connect Administrator Guide.
     * 
     *
     * @param deleteTrafficDistributionGroupRequest
     * @return Result of the DeleteTrafficDistributionGroup operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteTrafficDistributionGroup
     * @see AWS API Documentation
     */
    default DeleteTrafficDistributionGroupResponse deleteTrafficDistributionGroup(
            DeleteTrafficDistributionGroupRequest deleteTrafficDistributionGroupRequest) throws InvalidRequestException,
            AccessDeniedException, ResourceInUseException, ThrottlingException, InternalServiceException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes a traffic distribution group. This API can be called only in the Region where the traffic distribution
     * group is created.
     * 
     * 
     * For more information about deleting traffic distribution groups, see Delete
     * traffic distribution groups in the Amazon Connect Administrator Guide.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteTrafficDistributionGroupRequest.Builder}
     * avoiding the need to create one manually via {@link DeleteTrafficDistributionGroupRequest#builder()}
     * 
     *
     * @param deleteTrafficDistributionGroupRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteTrafficDistributionGroupRequest.Builder} to
     *        create a request.
     * @return Result of the DeleteTrafficDistributionGroup operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteTrafficDistributionGroup
     * @see AWS API Documentation
     */
    default DeleteTrafficDistributionGroupResponse deleteTrafficDistributionGroup(
            Consumer deleteTrafficDistributionGroupRequest)
            throws InvalidRequestException, AccessDeniedException, ResourceInUseException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return deleteTrafficDistributionGroup(DeleteTrafficDistributionGroupRequest.builder()
                .applyMutation(deleteTrafficDistributionGroupRequest).build());
    }

    /**
     * 
     * Deletes a use case from an integration association.
     * 
     *
     * @param deleteUseCaseRequest
     * @return Result of the DeleteUseCase operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteUseCase
     * @see AWS API
     *      Documentation
     */
    default DeleteUseCaseResponse deleteUseCase(DeleteUseCaseRequest deleteUseCaseRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, ThrottlingException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes a use case from an integration association.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteUseCaseRequest.Builder} avoiding the need to
     * create one manually via {@link DeleteUseCaseRequest#builder()}
     * 
     *
     * @param deleteUseCaseRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteUseCaseRequest.Builder} to create a request.
     * @return Result of the DeleteUseCase operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteUseCase
     * @see AWS API
     *      Documentation
     */
    default DeleteUseCaseResponse deleteUseCase(Consumer deleteUseCaseRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return deleteUseCase(DeleteUseCaseRequest.builder().applyMutation(deleteUseCaseRequest).build());
    }

    /**
     * 
     * Deletes a user account from the specified Amazon Connect instance.
     * 
     * 
     * For information about what happens to a user's data when their account is deleted, see Delete Users from Your Amazon
     * Connect Instance in the Amazon Connect Administrator Guide.
     * 
     * 
     * 
     * After calling DeleteUser, call DeleteQuickConnect
     * to delete any records related to the deleted users. This will help you:
     * 
     * 
     * 
     * 
     * Avoid dangling resources that impact your service quotas.
     * 
     * 
     * 
     * 
     * Remove deleted users so they don't appear to agents as transfer options.
     * 
     * 
     * 
     * 
     * Avoid the disruption of other Amazon Connect processes, such as instance replication and syncing if you're using
     * Amazon
     * Connect Global Resiliency.
     * 
     * 
     * 
     * 
     *
     * @param deleteUserRequest
     * @return Result of the DeleteUser operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteUser
     * @see AWS API
     *      Documentation
     */
    default DeleteUserResponse deleteUser(DeleteUserRequest deleteUserRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes a user account from the specified Amazon Connect instance.
     * 
     * 
     * For information about what happens to a user's data when their account is deleted, see Delete Users from Your Amazon
     * Connect Instance in the Amazon Connect Administrator Guide.
     * 
     * 
     * 
     * After calling DeleteUser, call DeleteQuickConnect
     * to delete any records related to the deleted users. This will help you:
     * 
     * 
     * 
     * 
     * Avoid dangling resources that impact your service quotas.
     * 
     * 
     * 
     * 
     * Remove deleted users so they don't appear to agents as transfer options.
     * 
     * 
     * 
     * 
     * Avoid the disruption of other Amazon Connect processes, such as instance replication and syncing if you're using
     * Amazon
     * Connect Global Resiliency.
     * 
     * 
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteUserRequest.Builder} avoiding the need to
     * create one manually via {@link DeleteUserRequest#builder()}
     * 
     *
     * @param deleteUserRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteUserRequest.Builder} to create a request.
     * @return Result of the DeleteUser operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteUser
     * @see AWS API
     *      Documentation
     */
    default DeleteUserResponse deleteUser(Consumer deleteUserRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return deleteUser(DeleteUserRequest.builder().applyMutation(deleteUserRequest).build());
    }

    /**
     * 
     * Deletes an existing user hierarchy group. It must not be associated with any agents or have any active child
     * groups.
     * 
     *
     * @param deleteUserHierarchyGroupRequest
     * @return Result of the DeleteUserHierarchyGroup operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteUserHierarchyGroup
     * @see AWS API Documentation
     */
    default DeleteUserHierarchyGroupResponse deleteUserHierarchyGroup(
            DeleteUserHierarchyGroupRequest deleteUserHierarchyGroupRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ResourceInUseException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes an existing user hierarchy group. It must not be associated with any agents or have any active child
     * groups.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteUserHierarchyGroupRequest.Builder} avoiding
     * the need to create one manually via {@link DeleteUserHierarchyGroupRequest#builder()}
     * 
     *
     * @param deleteUserHierarchyGroupRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteUserHierarchyGroupRequest.Builder} to create a
     *        request.
     * @return Result of the DeleteUserHierarchyGroup operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteUserHierarchyGroup
     * @see AWS API Documentation
     */
    default DeleteUserHierarchyGroupResponse deleteUserHierarchyGroup(
            Consumer deleteUserHierarchyGroupRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ResourceInUseException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return deleteUserHierarchyGroup(DeleteUserHierarchyGroupRequest.builder().applyMutation(deleteUserHierarchyGroupRequest)
                .build());
    }

    /**
     * 
     * Deletes the view entirely. It deletes the view and all associated qualifiers (versions and aliases).
     * 
     *
     * @param deleteViewRequest
     * @return Result of the DeleteView operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteView
     * @see AWS API
     *      Documentation
     */
    default DeleteViewResponse deleteView(DeleteViewRequest deleteViewRequest) throws AccessDeniedException,
            InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            TooManyRequestsException, ResourceInUseException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes the view entirely. It deletes the view and all associated qualifiers (versions and aliases).
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteViewRequest.Builder} avoiding the need to
     * create one manually via {@link DeleteViewRequest#builder()}
     * 
     *
     * @param deleteViewRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteViewRequest.Builder} to create a request.
     * @return Result of the DeleteView operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteView
     * @see AWS API
     *      Documentation
     */
    default DeleteViewResponse deleteView(Consumer deleteViewRequest) throws AccessDeniedException,
            InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            TooManyRequestsException, ResourceInUseException, AwsServiceException, SdkClientException, ConnectException {
        return deleteView(DeleteViewRequest.builder().applyMutation(deleteViewRequest).build());
    }

    /**
     * 
     * Deletes the particular version specified in ViewVersion identifier.
     * 
     *
     * @param deleteViewVersionRequest
     * @return Result of the DeleteViewVersion operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteViewVersion
     * @see AWS API
     *      Documentation
     */
    default DeleteViewVersionResponse deleteViewVersion(DeleteViewVersionRequest deleteViewVersionRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            InternalServiceException, TooManyRequestsException, ResourceInUseException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes the particular version specified in ViewVersion identifier.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteViewVersionRequest.Builder} avoiding the need
     * to create one manually via {@link DeleteViewVersionRequest#builder()}
     * 
     *
     * @param deleteViewVersionRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteViewVersionRequest.Builder} to create a
     *        request.
     * @return Result of the DeleteViewVersion operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteViewVersion
     * @see AWS API
     *      Documentation
     */
    default DeleteViewVersionResponse deleteViewVersion(Consumer deleteViewVersionRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            InternalServiceException, TooManyRequestsException, ResourceInUseException, AwsServiceException, SdkClientException,
            ConnectException {
        return deleteViewVersion(DeleteViewVersionRequest.builder().applyMutation(deleteViewVersionRequest).build());
    }

    /**
     * 
     * Deletes the vocabulary that has the given identifier.
     * 
     *
     * @param deleteVocabularyRequest
     * @return Result of the DeleteVocabulary operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteVocabulary
     * @see AWS API
     *      Documentation
     */
    default DeleteVocabularyResponse deleteVocabulary(DeleteVocabularyRequest deleteVocabularyRequest)
            throws InvalidRequestException, ResourceNotFoundException, InternalServiceException, ThrottlingException,
            AccessDeniedException, ResourceInUseException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Deletes the vocabulary that has the given identifier.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DeleteVocabularyRequest.Builder} avoiding the need
     * to create one manually via {@link DeleteVocabularyRequest#builder()}
     * 
     *
     * @param deleteVocabularyRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DeleteVocabularyRequest.Builder} to create a request.
     * @return Result of the DeleteVocabulary operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DeleteVocabulary
     * @see AWS API
     *      Documentation
     */
    default DeleteVocabularyResponse deleteVocabulary(Consumer deleteVocabularyRequest)
            throws InvalidRequestException, ResourceNotFoundException, InternalServiceException, ThrottlingException,
            AccessDeniedException, ResourceInUseException, AwsServiceException, SdkClientException, ConnectException {
        return deleteVocabulary(DeleteVocabularyRequest.builder().applyMutation(deleteVocabularyRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Describes an agent status.
     * 
     *
     * @param describeAgentStatusRequest
     * @return Result of the DescribeAgentStatus operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeAgentStatus
     * @see AWS
     *      API Documentation
     */
    default DescribeAgentStatusResponse describeAgentStatus(DescribeAgentStatusRequest describeAgentStatusRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Describes an agent status.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeAgentStatusRequest.Builder} avoiding the
     * need to create one manually via {@link DescribeAgentStatusRequest#builder()}
     * 
     *
     * @param describeAgentStatusRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeAgentStatusRequest.Builder} to create a
     *        request.
     * @return Result of the DescribeAgentStatus operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeAgentStatus
     * @see AWS
     *      API Documentation
     */
    default DescribeAgentStatusResponse describeAgentStatus(
            Consumer describeAgentStatusRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return describeAgentStatus(DescribeAgentStatusRequest.builder().applyMutation(describeAgentStatusRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change. To request access to this API,
     * contact Amazon Web Services Support.
     * 
     * 
     * Describes the target authentication profile.
     * 
     *
     * @param describeAuthenticationProfileRequest
     * @return Result of the DescribeAuthenticationProfile operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeAuthenticationProfile
     * @see AWS API Documentation
     */
    default DescribeAuthenticationProfileResponse describeAuthenticationProfile(
            DescribeAuthenticationProfileRequest describeAuthenticationProfileRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change. To request access to this API,
     * contact Amazon Web Services Support.
     * 
     * 
     * Describes the target authentication profile.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeAuthenticationProfileRequest.Builder}
     * avoiding the need to create one manually via {@link DescribeAuthenticationProfileRequest#builder()}
     * 
     *
     * @param describeAuthenticationProfileRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeAuthenticationProfileRequest.Builder} to
     *        create a request.
     * @return Result of the DescribeAuthenticationProfile operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeAuthenticationProfile
     * @see AWS API Documentation
     */
    default DescribeAuthenticationProfileResponse describeAuthenticationProfile(
            Consumer describeAuthenticationProfileRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return describeAuthenticationProfile(DescribeAuthenticationProfileRequest.builder()
                .applyMutation(describeAuthenticationProfileRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Describes the specified contact.
     * 
     * 
     * 
     * Contact information remains available in Amazon Connect for 24 months, and then it is deleted.
     * 
     * 
     * Only data from November 12, 2021, and later is returned by this API.
     * 
     * 
     *
     * @param describeContactRequest
     * @return Result of the DescribeContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeContact
     * @see AWS API
     *      Documentation
     */
    default DescribeContactResponse describeContact(DescribeContactRequest describeContactRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Describes the specified contact.
     * 
     * 
     * 
     * Contact information remains available in Amazon Connect for 24 months, and then it is deleted.
     * 
     * 
     * Only data from November 12, 2021, and later is returned by this API.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeContactRequest.Builder} avoiding the need
     * to create one manually via {@link DescribeContactRequest#builder()}
     * 
     *
     * @param describeContactRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeContactRequest.Builder} to create a request.
     * @return Result of the DescribeContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeContact
     * @see AWS API
     *      Documentation
     */
    default DescribeContactResponse describeContact(Consumer describeContactRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return describeContact(DescribeContactRequest.builder().applyMutation(describeContactRequest).build());
    }

    /**
     * 
     * Describes a contact evaluation in the specified Amazon Connect instance.
     * 
     *
     * @param describeContactEvaluationRequest
     * @return Result of the DescribeContactEvaluation operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeContactEvaluation
     * @see AWS API Documentation
     */
    default DescribeContactEvaluationResponse describeContactEvaluation(
            DescribeContactEvaluationRequest describeContactEvaluationRequest) throws InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Describes a contact evaluation in the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeContactEvaluationRequest.Builder} avoiding
     * the need to create one manually via {@link DescribeContactEvaluationRequest#builder()}
     * 
     *
     * @param describeContactEvaluationRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeContactEvaluationRequest.Builder} to create a
     *        request.
     * @return Result of the DescribeContactEvaluation operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeContactEvaluation
     * @see AWS API Documentation
     */
    default DescribeContactEvaluationResponse describeContactEvaluation(
            Consumer describeContactEvaluationRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return describeContactEvaluation(DescribeContactEvaluationRequest.builder()
                .applyMutation(describeContactEvaluationRequest).build());
    }

    /**
     * 
     * Describes the specified flow.
     * 
     * 
     * You can also create and update flows using the Amazon Connect Flow
     * language.
     * 
     * 
     * Use the $SAVED alias in the request to describe the SAVED content of a Flow. For
     * example, arn:aws:.../contact-flow/{id}:$SAVED. Once a contact flow is published,
     * $SAVED needs to be supplied to view saved content that has not been published.
     * 
     * 
     * In the response, Status indicates the flow status as either SAVED or PUBLISHED.
     * The PUBLISHED status will initiate validation on the content. SAVED does not initiate
     * validation of the content. SAVED | PUBLISHED
     * 
     *
     * @param describeContactFlowRequest
     * @return Result of the DescribeContactFlow operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ContactFlowNotPublishedException
     *         The flow has not been published.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeContactFlow
     * @see AWS
     *      API Documentation
     */
    default DescribeContactFlowResponse describeContactFlow(DescribeContactFlowRequest describeContactFlowRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            ContactFlowNotPublishedException, ThrottlingException, InternalServiceException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Describes the specified flow.
     * 
     * 
     * You can also create and update flows using the Amazon Connect Flow
     * language.
     * 
     * 
     * Use the $SAVED alias in the request to describe the SAVED content of a Flow. For
     * example, arn:aws:.../contact-flow/{id}:$SAVED. Once a contact flow is published,
     * $SAVED needs to be supplied to view saved content that has not been published.
     * 
     * 
     * In the response, Status indicates the flow status as either SAVED or PUBLISHED.
     * The PUBLISHED status will initiate validation on the content. SAVED does not initiate
     * validation of the content. SAVED | PUBLISHED
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeContactFlowRequest.Builder} avoiding the
     * need to create one manually via {@link DescribeContactFlowRequest#builder()}
     * 
     *
     * @param describeContactFlowRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeContactFlowRequest.Builder} to create a
     *        request.
     * @return Result of the DescribeContactFlow operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ContactFlowNotPublishedException
     *         The flow has not been published.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeContactFlow
     * @see AWS
     *      API Documentation
     */
    default DescribeContactFlowResponse describeContactFlow(
            Consumer describeContactFlowRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ContactFlowNotPublishedException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return describeContactFlow(DescribeContactFlowRequest.builder().applyMutation(describeContactFlowRequest).build());
    }

    /**
     * 
     * Describes the specified flow module.
     * 
     * 
     * Use the $SAVED alias in the request to describe the SAVED content of a Flow. For
     * example, arn:aws:.../contact-flow/{id}:$SAVED. Once a contact flow is published,
     * $SAVED needs to be supplied to view saved content that has not been published.
     * 
     *
     * @param describeContactFlowModuleRequest
     * @return Result of the DescribeContactFlowModule operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeContactFlowModule
     * @see AWS API Documentation
     */
    default DescribeContactFlowModuleResponse describeContactFlowModule(
            DescribeContactFlowModuleRequest describeContactFlowModuleRequest) throws AccessDeniedException,
            InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Describes the specified flow module.
     * 
     * 
     * Use the $SAVED alias in the request to describe the SAVED content of a Flow. For
     * example, arn:aws:.../contact-flow/{id}:$SAVED. Once a contact flow is published,
     * $SAVED needs to be supplied to view saved content that has not been published.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeContactFlowModuleRequest.Builder} avoiding
     * the need to create one manually via {@link DescribeContactFlowModuleRequest#builder()}
     * 
     *
     * @param describeContactFlowModuleRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeContactFlowModuleRequest.Builder} to create a
     *        request.
     * @return Result of the DescribeContactFlowModule operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeContactFlowModule
     * @see AWS API Documentation
     */
    default DescribeContactFlowModuleResponse describeContactFlowModule(
            Consumer describeContactFlowModuleRequest) throws AccessDeniedException,
            InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return describeContactFlowModule(DescribeContactFlowModuleRequest.builder()
                .applyMutation(describeContactFlowModuleRequest).build());
    }

    /**
     * 
     * Describes an evaluation form in the specified Amazon Connect instance. If the version property is not provided,
     * the latest version of the evaluation form is described.
     * 
     *
     * @param describeEvaluationFormRequest
     * @return Result of the DescribeEvaluationForm operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeEvaluationForm
     * @see AWS API Documentation
     */
    default DescribeEvaluationFormResponse describeEvaluationForm(DescribeEvaluationFormRequest describeEvaluationFormRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Describes an evaluation form in the specified Amazon Connect instance. If the version property is not provided,
     * the latest version of the evaluation form is described.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeEvaluationFormRequest.Builder} avoiding the
     * need to create one manually via {@link DescribeEvaluationFormRequest#builder()}
     * 
     *
     * @param describeEvaluationFormRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeEvaluationFormRequest.Builder} to create a
     *        request.
     * @return Result of the DescribeEvaluationForm operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeEvaluationForm
     * @see AWS API Documentation
     */
    default DescribeEvaluationFormResponse describeEvaluationForm(
            Consumer describeEvaluationFormRequest) throws InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        return describeEvaluationForm(DescribeEvaluationFormRequest.builder().applyMutation(describeEvaluationFormRequest)
                .build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Describes the hours of operation.
     * 
     *
     * @param describeHoursOfOperationRequest
     * @return Result of the DescribeHoursOfOperation operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeHoursOfOperation
     * @see AWS API Documentation
     */
    default DescribeHoursOfOperationResponse describeHoursOfOperation(
            DescribeHoursOfOperationRequest describeHoursOfOperationRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Describes the hours of operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeHoursOfOperationRequest.Builder} avoiding
     * the need to create one manually via {@link DescribeHoursOfOperationRequest#builder()}
     * 
     *
     * @param describeHoursOfOperationRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeHoursOfOperationRequest.Builder} to create a
     *        request.
     * @return Result of the DescribeHoursOfOperation operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeHoursOfOperation
     * @see AWS API Documentation
     */
    default DescribeHoursOfOperationResponse describeHoursOfOperation(
            Consumer describeHoursOfOperationRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return describeHoursOfOperation(DescribeHoursOfOperationRequest.builder().applyMutation(describeHoursOfOperationRequest)
                .build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Returns the current state of the specified instance identifier. It tracks the instance while it is being created
     * and returns an error status, if applicable.
     * 
     * 
     * If an instance is not created successfully, the instance status reason field returns details relevant to the
     * reason. The instance in a failed state is returned only for 24 hours after the CreateInstance API was invoked.
     * 
     *
     * @param describeInstanceRequest
     * @return Result of the DescribeInstance operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeInstance
     * @see AWS API
     *      Documentation
     */
    default DescribeInstanceResponse describeInstance(DescribeInstanceRequest describeInstanceRequest)
            throws InvalidRequestException, ResourceNotFoundException, InternalServiceException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Returns the current state of the specified instance identifier. It tracks the instance while it is being created
     * and returns an error status, if applicable.
     * 
     * 
     * If an instance is not created successfully, the instance status reason field returns details relevant to the
     * reason. The instance in a failed state is returned only for 24 hours after the CreateInstance API was invoked.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeInstanceRequest.Builder} avoiding the need
     * to create one manually via {@link DescribeInstanceRequest#builder()}
     * 
     *
     * @param describeInstanceRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeInstanceRequest.Builder} to create a request.
     * @return Result of the DescribeInstance operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeInstance
     * @see AWS API
     *      Documentation
     */
    default DescribeInstanceResponse describeInstance(Consumer describeInstanceRequest)
            throws InvalidRequestException, ResourceNotFoundException, InternalServiceException, AwsServiceException,
            SdkClientException, ConnectException {
        return describeInstance(DescribeInstanceRequest.builder().applyMutation(describeInstanceRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Describes the specified instance attribute.
     * 
     *
     * @param describeInstanceAttributeRequest
     * @return Result of the DescribeInstanceAttribute operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeInstanceAttribute
     * @see AWS API Documentation
     */
    default DescribeInstanceAttributeResponse describeInstanceAttribute(
            DescribeInstanceAttributeRequest describeInstanceAttributeRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Describes the specified instance attribute.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeInstanceAttributeRequest.Builder} avoiding
     * the need to create one manually via {@link DescribeInstanceAttributeRequest#builder()}
     * 
     *
     * @param describeInstanceAttributeRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeInstanceAttributeRequest.Builder} to create a
     *        request.
     * @return Result of the DescribeInstanceAttribute operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeInstanceAttribute
     * @see AWS API Documentation
     */
    default DescribeInstanceAttributeResponse describeInstanceAttribute(
            Consumer describeInstanceAttributeRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return describeInstanceAttribute(DescribeInstanceAttributeRequest.builder()
                .applyMutation(describeInstanceAttributeRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Retrieves the current storage configurations for the specified resource type, association ID, and instance ID.
     * 
     *
     * @param describeInstanceStorageConfigRequest
     * @return Result of the DescribeInstanceStorageConfig operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeInstanceStorageConfig
     * @see AWS API Documentation
     */
    default DescribeInstanceStorageConfigResponse describeInstanceStorageConfig(
            DescribeInstanceStorageConfigRequest describeInstanceStorageConfigRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Retrieves the current storage configurations for the specified resource type, association ID, and instance ID.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeInstanceStorageConfigRequest.Builder}
     * avoiding the need to create one manually via {@link DescribeInstanceStorageConfigRequest#builder()}
     * 
     *
     * @param describeInstanceStorageConfigRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeInstanceStorageConfigRequest.Builder} to
     *        create a request.
     * @return Result of the DescribeInstanceStorageConfig operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeInstanceStorageConfig
     * @see AWS API Documentation
     */
    default DescribeInstanceStorageConfigResponse describeInstanceStorageConfig(
            Consumer describeInstanceStorageConfigRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return describeInstanceStorageConfig(DescribeInstanceStorageConfigRequest.builder()
                .applyMutation(describeInstanceStorageConfigRequest).build());
    }

    /**
     * 
     * Gets details and status of a phone number that’s claimed to your Amazon Connect instance or traffic distribution
     * group.
     * 
     * 
     * 
     * If the number is claimed to a traffic distribution group, and you are calling in the Amazon Web Services Region
     * where the traffic distribution group was created, you can use either a phone number ARN or UUID value for the
     * PhoneNumberId URI request parameter. However, if the number is claimed to a traffic distribution
     * group and you are calling this API in the alternate Amazon Web Services Region associated with the traffic
     * distribution group, you must provide a full phone number ARN. If a UUID is provided in this scenario, you will
     * receive a ResourceNotFoundException.
     * 
     * 
     *
     * @param describePhoneNumberRequest
     * @return Result of the DescribePhoneNumber operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribePhoneNumber
     * @see AWS
     *      API Documentation
     */
    default DescribePhoneNumberResponse describePhoneNumber(DescribePhoneNumberRequest describePhoneNumberRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AccessDeniedException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Gets details and status of a phone number that’s claimed to your Amazon Connect instance or traffic distribution
     * group.
     * 
     * 
     * 
     * If the number is claimed to a traffic distribution group, and you are calling in the Amazon Web Services Region
     * where the traffic distribution group was created, you can use either a phone number ARN or UUID value for the
     * PhoneNumberId URI request parameter. However, if the number is claimed to a traffic distribution
     * group and you are calling this API in the alternate Amazon Web Services Region associated with the traffic
     * distribution group, you must provide a full phone number ARN. If a UUID is provided in this scenario, you will
     * receive a ResourceNotFoundException.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribePhoneNumberRequest.Builder} avoiding the
     * need to create one manually via {@link DescribePhoneNumberRequest#builder()}
     * 
     *
     * @param describePhoneNumberRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribePhoneNumberRequest.Builder} to create a
     *        request.
     * @return Result of the DescribePhoneNumber operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribePhoneNumber
     * @see AWS
     *      API Documentation
     */
    default DescribePhoneNumberResponse describePhoneNumber(
            Consumer describePhoneNumberRequest) throws InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, AccessDeniedException, AwsServiceException,
            SdkClientException, ConnectException {
        return describePhoneNumber(DescribePhoneNumberRequest.builder().applyMutation(describePhoneNumberRequest).build());
    }

    /**
     * 
     * Describes a predefined attribute for the specified Amazon Connect instance. Predefined attributes are
     * attributes in an Amazon Connect instance that can be used to route contacts to an agent or pools of agents within
     * a queue. For more information, see Create predefined
     * attributes for routing contacts to agents.
     * 
     *
     * @param describePredefinedAttributeRequest
     * @return Result of the DescribePredefinedAttribute operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribePredefinedAttribute
     * @see AWS API Documentation
     */
    default DescribePredefinedAttributeResponse describePredefinedAttribute(
            DescribePredefinedAttributeRequest describePredefinedAttributeRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Describes a predefined attribute for the specified Amazon Connect instance. Predefined attributes are
     * attributes in an Amazon Connect instance that can be used to route contacts to an agent or pools of agents within
     * a queue. For more information, see Create predefined
     * attributes for routing contacts to agents.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribePredefinedAttributeRequest.Builder}
     * avoiding the need to create one manually via {@link DescribePredefinedAttributeRequest#builder()}
     * 
     *
     * @param describePredefinedAttributeRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribePredefinedAttributeRequest.Builder} to create
     *        a request.
     * @return Result of the DescribePredefinedAttribute operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribePredefinedAttribute
     * @see AWS API Documentation
     */
    default DescribePredefinedAttributeResponse describePredefinedAttribute(
            Consumer describePredefinedAttributeRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return describePredefinedAttribute(DescribePredefinedAttributeRequest.builder()
                .applyMutation(describePredefinedAttributeRequest).build());
    }

    /**
     * 
     * Describes the prompt.
     * 
     *
     * @param describePromptRequest
     * @return Result of the DescribePrompt operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribePrompt
     * @see AWS API
     *      Documentation
     */
    default DescribePromptResponse describePrompt(DescribePromptRequest describePromptRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Describes the prompt.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribePromptRequest.Builder} avoiding the need to
     * create one manually via {@link DescribePromptRequest#builder()}
     * 
     *
     * @param describePromptRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribePromptRequest.Builder} to create a request.
     * @return Result of the DescribePrompt operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribePrompt
     * @see AWS API
     *      Documentation
     */
    default DescribePromptResponse describePrompt(Consumer describePromptRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return describePrompt(DescribePromptRequest.builder().applyMutation(describePromptRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Describes the specified queue.
     * 
     *
     * @param describeQueueRequest
     * @return Result of the DescribeQueue operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeQueue
     * @see AWS API
     *      Documentation
     */
    default DescribeQueueResponse describeQueue(DescribeQueueRequest describeQueueRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Describes the specified queue.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeQueueRequest.Builder} avoiding the need to
     * create one manually via {@link DescribeQueueRequest#builder()}
     * 
     *
     * @param describeQueueRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeQueueRequest.Builder} to create a request.
     * @return Result of the DescribeQueue operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeQueue
     * @see AWS API
     *      Documentation
     */
    default DescribeQueueResponse describeQueue(Consumer describeQueueRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return describeQueue(DescribeQueueRequest.builder().applyMutation(describeQueueRequest).build());
    }

    /**
     * 
     * Describes the quick connect.
     * 
     *
     * @param describeQuickConnectRequest
     * @return Result of the DescribeQuickConnect operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeQuickConnect
     * @see AWS
     *      API Documentation
     */
    default DescribeQuickConnectResponse describeQuickConnect(DescribeQuickConnectRequest describeQuickConnectRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Describes the quick connect.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeQuickConnectRequest.Builder} avoiding the
     * need to create one manually via {@link DescribeQuickConnectRequest#builder()}
     * 
     *
     * @param describeQuickConnectRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeQuickConnectRequest.Builder} to create a
     *        request.
     * @return Result of the DescribeQuickConnect operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeQuickConnect
     * @see AWS
     *      API Documentation
     */
    default DescribeQuickConnectResponse describeQuickConnect(
            Consumer describeQuickConnectRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return describeQuickConnect(DescribeQuickConnectRequest.builder().applyMutation(describeQuickConnectRequest).build());
    }

    /**
     * 
     * Describes the specified routing profile.
     * 
     *
     * @param describeRoutingProfileRequest
     * @return Result of the DescribeRoutingProfile operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeRoutingProfile
     * @see AWS API Documentation
     */
    default DescribeRoutingProfileResponse describeRoutingProfile(DescribeRoutingProfileRequest describeRoutingProfileRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Describes the specified routing profile.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeRoutingProfileRequest.Builder} avoiding the
     * need to create one manually via {@link DescribeRoutingProfileRequest#builder()}
     * 
     *
     * @param describeRoutingProfileRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeRoutingProfileRequest.Builder} to create a
     *        request.
     * @return Result of the DescribeRoutingProfile operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeRoutingProfile
     * @see AWS API Documentation
     */
    default DescribeRoutingProfileResponse describeRoutingProfile(
            Consumer describeRoutingProfileRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return describeRoutingProfile(DescribeRoutingProfileRequest.builder().applyMutation(describeRoutingProfileRequest)
                .build());
    }

    /**
     * 
     * Describes a rule for the specified Amazon Connect instance.
     * 
     *
     * @param describeRuleRequest
     * @return Result of the DescribeRule operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeRule
     * @see AWS API
     *      Documentation
     */
    default DescribeRuleResponse describeRule(DescribeRuleRequest describeRuleRequest) throws InvalidRequestException,
            ResourceNotFoundException, InternalServiceException, ThrottlingException, AccessDeniedException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Describes a rule for the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeRuleRequest.Builder} avoiding the need to
     * create one manually via {@link DescribeRuleRequest#builder()}
     * 
     *
     * @param describeRuleRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeRuleRequest.Builder} to create a request.
     * @return Result of the DescribeRule operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeRule
     * @see AWS API
     *      Documentation
     */
    default DescribeRuleResponse describeRule(Consumer describeRuleRequest)
            throws InvalidRequestException, ResourceNotFoundException, InternalServiceException, ThrottlingException,
            AccessDeniedException, AwsServiceException, SdkClientException, ConnectException {
        return describeRule(DescribeRuleRequest.builder().applyMutation(describeRuleRequest).build());
    }

    /**
     * 
     * Gets basic information about the security profile.
     * 
     * 
     * For information about security profiles, see Security Profiles
     * in the Amazon Connect Administrator Guide. For a mapping of the API name and user interface name of the
     * security profile permissions, see List of security profile
     * permissions.
     * 
     *
     * @param describeSecurityProfileRequest
     * @return Result of the DescribeSecurityProfile operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeSecurityProfile
     * @see AWS API Documentation
     */
    default DescribeSecurityProfileResponse describeSecurityProfile(DescribeSecurityProfileRequest describeSecurityProfileRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Gets basic information about the security profile.
     * 
     * 
     * For information about security profiles, see Security Profiles
     * in the Amazon Connect Administrator Guide. For a mapping of the API name and user interface name of the
     * security profile permissions, see List of security profile
     * permissions.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeSecurityProfileRequest.Builder} avoiding
     * the need to create one manually via {@link DescribeSecurityProfileRequest#builder()}
     * 
     *
     * @param describeSecurityProfileRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeSecurityProfileRequest.Builder} to create a
     *        request.
     * @return Result of the DescribeSecurityProfile operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeSecurityProfile
     * @see AWS API Documentation
     */
    default DescribeSecurityProfileResponse describeSecurityProfile(
            Consumer describeSecurityProfileRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return describeSecurityProfile(DescribeSecurityProfileRequest.builder().applyMutation(describeSecurityProfileRequest)
                .build());
    }

    /**
     * 
     * Gets details and status of a traffic distribution group.
     * 
     *
     * @param describeTrafficDistributionGroupRequest
     * @return Result of the DescribeTrafficDistributionGroup operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeTrafficDistributionGroup
     * @see AWS API Documentation
     */
    default DescribeTrafficDistributionGroupResponse describeTrafficDistributionGroup(
            DescribeTrafficDistributionGroupRequest describeTrafficDistributionGroupRequest) throws InvalidRequestException,
            AccessDeniedException, ResourceNotFoundException, InternalServiceException, ThrottlingException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Gets details and status of a traffic distribution group.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeTrafficDistributionGroupRequest.Builder}
     * avoiding the need to create one manually via {@link DescribeTrafficDistributionGroupRequest#builder()}
     * 
     *
     * @param describeTrafficDistributionGroupRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeTrafficDistributionGroupRequest.Builder} to
     *        create a request.
     * @return Result of the DescribeTrafficDistributionGroup operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeTrafficDistributionGroup
     * @see AWS API Documentation
     */
    default DescribeTrafficDistributionGroupResponse describeTrafficDistributionGroup(
            Consumer describeTrafficDistributionGroupRequest)
            throws InvalidRequestException, AccessDeniedException, ResourceNotFoundException, InternalServiceException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return describeTrafficDistributionGroup(DescribeTrafficDistributionGroupRequest.builder()
                .applyMutation(describeTrafficDistributionGroupRequest).build());
    }

    /**
     * 
     * Describes the specified user. You can find the instance ID in the
     * Amazon Connect console (it’s the final part of the ARN). The console does not display the user IDs. Instead,
     * list the users and note the IDs provided in the output.
     * 
     *
     * @param describeUserRequest
     * @return Result of the DescribeUser operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeUser
     * @see AWS API
     *      Documentation
     */
    default DescribeUserResponse describeUser(DescribeUserRequest describeUserRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Describes the specified user. You can find the instance ID in the
     * Amazon Connect console (it’s the final part of the ARN). The console does not display the user IDs. Instead,
     * list the users and note the IDs provided in the output.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeUserRequest.Builder} avoiding the need to
     * create one manually via {@link DescribeUserRequest#builder()}
     * 
     *
     * @param describeUserRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeUserRequest.Builder} to create a request.
     * @return Result of the DescribeUser operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeUser
     * @see AWS API
     *      Documentation
     */
    default DescribeUserResponse describeUser(Consumer describeUserRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return describeUser(DescribeUserRequest.builder().applyMutation(describeUserRequest).build());
    }

    /**
     * 
     * Describes the specified hierarchy group.
     * 
     *
     * @param describeUserHierarchyGroupRequest
     * @return Result of the DescribeUserHierarchyGroup operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeUserHierarchyGroup
     * @see AWS API Documentation
     */
    default DescribeUserHierarchyGroupResponse describeUserHierarchyGroup(
            DescribeUserHierarchyGroupRequest describeUserHierarchyGroupRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Describes the specified hierarchy group.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeUserHierarchyGroupRequest.Builder} avoiding
     * the need to create one manually via {@link DescribeUserHierarchyGroupRequest#builder()}
     * 
     *
     * @param describeUserHierarchyGroupRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeUserHierarchyGroupRequest.Builder} to create
     *        a request.
     * @return Result of the DescribeUserHierarchyGroup operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeUserHierarchyGroup
     * @see AWS API Documentation
     */
    default DescribeUserHierarchyGroupResponse describeUserHierarchyGroup(
            Consumer describeUserHierarchyGroupRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return describeUserHierarchyGroup(DescribeUserHierarchyGroupRequest.builder()
                .applyMutation(describeUserHierarchyGroupRequest).build());
    }

    /**
     * 
     * Describes the hierarchy structure of the specified Amazon Connect instance.
     * 
     *
     * @param describeUserHierarchyStructureRequest
     * @return Result of the DescribeUserHierarchyStructure operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeUserHierarchyStructure
     * @see AWS API Documentation
     */
    default DescribeUserHierarchyStructureResponse describeUserHierarchyStructure(
            DescribeUserHierarchyStructureRequest describeUserHierarchyStructureRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Describes the hierarchy structure of the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeUserHierarchyStructureRequest.Builder}
     * avoiding the need to create one manually via {@link DescribeUserHierarchyStructureRequest#builder()}
     * 
     *
     * @param describeUserHierarchyStructureRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeUserHierarchyStructureRequest.Builder} to
     *        create a request.
     * @return Result of the DescribeUserHierarchyStructure operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeUserHierarchyStructure
     * @see AWS API Documentation
     */
    default DescribeUserHierarchyStructureResponse describeUserHierarchyStructure(
            Consumer describeUserHierarchyStructureRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return describeUserHierarchyStructure(DescribeUserHierarchyStructureRequest.builder()
                .applyMutation(describeUserHierarchyStructureRequest).build());
    }

    /**
     * 
     * Retrieves the view for the specified Amazon Connect instance and view identifier.
     * 
     * 
     * The view identifier can be supplied as a ViewId or ARN.
     * 
     * 
     * $SAVED needs to be supplied if a view is unpublished.
     * 
     * 
     * The view identifier can contain an optional qualifier, for example, <view-id>:$SAVED, which
     * is either an actual version number or an Amazon Connect managed qualifier $SAVED | $LATEST. If
     * it is not supplied, then $LATEST is assumed for customer managed views and an error is returned
     * if there is no published content available. Version 1 is assumed for Amazon Web Services managed views.
     * 
     *
     * @param describeViewRequest
     * @return Result of the DescribeView operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeView
     * @see AWS API
     *      Documentation
     */
    default DescribeViewResponse describeView(DescribeViewRequest describeViewRequest) throws AccessDeniedException,
            InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            TooManyRequestsException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Retrieves the view for the specified Amazon Connect instance and view identifier.
     * 
     * 
     * The view identifier can be supplied as a ViewId or ARN.
     * 
     * 
     * $SAVED needs to be supplied if a view is unpublished.
     * 
     * 
     * The view identifier can contain an optional qualifier, for example, <view-id>:$SAVED, which
     * is either an actual version number or an Amazon Connect managed qualifier $SAVED | $LATEST. If
     * it is not supplied, then $LATEST is assumed for customer managed views and an error is returned
     * if there is no published content available. Version 1 is assumed for Amazon Web Services managed views.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeViewRequest.Builder} avoiding the need to
     * create one manually via {@link DescribeViewRequest#builder()}
     * 
     *
     * @param describeViewRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeViewRequest.Builder} to create a request.
     * @return Result of the DescribeView operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeView
     * @see AWS API
     *      Documentation
     */
    default DescribeViewResponse describeView(Consumer describeViewRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            InternalServiceException, TooManyRequestsException, AwsServiceException, SdkClientException, ConnectException {
        return describeView(DescribeViewRequest.builder().applyMutation(describeViewRequest).build());
    }

    /**
     * 
     * Describes the specified vocabulary.
     * 
     *
     * @param describeVocabularyRequest
     * @return Result of the DescribeVocabulary operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeVocabulary
     * @see AWS
     *      API Documentation
     */
    default DescribeVocabularyResponse describeVocabulary(DescribeVocabularyRequest describeVocabularyRequest)
            throws InvalidRequestException, ResourceNotFoundException, InternalServiceException, ThrottlingException,
            AccessDeniedException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Describes the specified vocabulary.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DescribeVocabularyRequest.Builder} avoiding the
     * need to create one manually via {@link DescribeVocabularyRequest#builder()}
     * 
     *
     * @param describeVocabularyRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DescribeVocabularyRequest.Builder} to create a
     *        request.
     * @return Result of the DescribeVocabulary operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DescribeVocabulary
     * @see AWS
     *      API Documentation
     */
    default DescribeVocabularyResponse describeVocabulary(Consumer describeVocabularyRequest)
            throws InvalidRequestException, ResourceNotFoundException, InternalServiceException, ThrottlingException,
            AccessDeniedException, AwsServiceException, SdkClientException, ConnectException {
        return describeVocabulary(DescribeVocabularyRequest.builder().applyMutation(describeVocabularyRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Removes the dataset ID associated with a given Amazon Connect instance.
     * 
     *
     * @param disassociateAnalyticsDataSetRequest
     * @return Result of the DisassociateAnalyticsDataSet operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateAnalyticsDataSet
     * @see AWS API Documentation
     */
    default DisassociateAnalyticsDataSetResponse disassociateAnalyticsDataSet(
            DisassociateAnalyticsDataSetRequest disassociateAnalyticsDataSetRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Removes the dataset ID associated with a given Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DisassociateAnalyticsDataSetRequest.Builder}
     * avoiding the need to create one manually via {@link DisassociateAnalyticsDataSetRequest#builder()}
     * 
     *
     * @param disassociateAnalyticsDataSetRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DisassociateAnalyticsDataSetRequest.Builder} to
     *        create a request.
     * @return Result of the DisassociateAnalyticsDataSet operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateAnalyticsDataSet
     * @see AWS API Documentation
     */
    default DisassociateAnalyticsDataSetResponse disassociateAnalyticsDataSet(
            Consumer disassociateAnalyticsDataSetRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return disassociateAnalyticsDataSet(DisassociateAnalyticsDataSetRequest.builder()
                .applyMutation(disassociateAnalyticsDataSetRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Revokes access to integrated applications from Amazon Connect.
     * 
     *
     * @param disassociateApprovedOriginRequest
     * @return Result of the DisassociateApprovedOrigin operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateApprovedOrigin
     * @see AWS API Documentation
     */
    default DisassociateApprovedOriginResponse disassociateApprovedOrigin(
            DisassociateApprovedOriginRequest disassociateApprovedOriginRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Revokes access to integrated applications from Amazon Connect.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DisassociateApprovedOriginRequest.Builder} avoiding
     * the need to create one manually via {@link DisassociateApprovedOriginRequest#builder()}
     * 
     *
     * @param disassociateApprovedOriginRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DisassociateApprovedOriginRequest.Builder} to create
     *        a request.
     * @return Result of the DisassociateApprovedOrigin operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateApprovedOrigin
     * @see AWS API Documentation
     */
    default DisassociateApprovedOriginResponse disassociateApprovedOrigin(
            Consumer disassociateApprovedOriginRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return disassociateApprovedOrigin(DisassociateApprovedOriginRequest.builder()
                .applyMutation(disassociateApprovedOriginRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Revokes authorization from the specified instance to access the specified Amazon Lex or Amazon Lex V2 bot.
     * 
     *
     * @param disassociateBotRequest
     * @return Result of the DisassociateBot operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateBot
     * @see AWS API
     *      Documentation
     */
    default DisassociateBotResponse disassociateBot(DisassociateBotRequest disassociateBotRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Revokes authorization from the specified instance to access the specified Amazon Lex or Amazon Lex V2 bot.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DisassociateBotRequest.Builder} avoiding the need
     * to create one manually via {@link DisassociateBotRequest#builder()}
     * 
     *
     * @param disassociateBotRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DisassociateBotRequest.Builder} to create a request.
     * @return Result of the DisassociateBot operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateBot
     * @see AWS API
     *      Documentation
     */
    default DisassociateBotResponse disassociateBot(Consumer disassociateBotRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return disassociateBot(DisassociateBotRequest.builder().applyMutation(disassociateBotRequest).build());
    }

    /**
     * 
     * Disassociates a connect resource from a flow.
     * 
     *
     * @param disassociateFlowRequest
     * @return Result of the DisassociateFlow operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateFlow
     * @see AWS API
     *      Documentation
     */
    default DisassociateFlowResponse disassociateFlow(DisassociateFlowRequest disassociateFlowRequest)
            throws AccessDeniedException, ResourceNotFoundException, InternalServiceException, InvalidRequestException,
            InvalidParameterException, ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Disassociates a connect resource from a flow.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DisassociateFlowRequest.Builder} avoiding the need
     * to create one manually via {@link DisassociateFlowRequest#builder()}
     * 
     *
     * @param disassociateFlowRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DisassociateFlowRequest.Builder} to create a request.
     * @return Result of the DisassociateFlow operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateFlow
     * @see AWS API
     *      Documentation
     */
    default DisassociateFlowResponse disassociateFlow(Consumer disassociateFlowRequest)
            throws AccessDeniedException, ResourceNotFoundException, InternalServiceException, InvalidRequestException,
            InvalidParameterException, ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return disassociateFlow(DisassociateFlowRequest.builder().applyMutation(disassociateFlowRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Removes the storage type configurations for the specified resource type and association ID.
     * 
     *
     * @param disassociateInstanceStorageConfigRequest
     * @return Result of the DisassociateInstanceStorageConfig operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateInstanceStorageConfig
     * @see AWS API Documentation
     */
    default DisassociateInstanceStorageConfigResponse disassociateInstanceStorageConfig(
            DisassociateInstanceStorageConfigRequest disassociateInstanceStorageConfigRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Removes the storage type configurations for the specified resource type and association ID.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DisassociateInstanceStorageConfigRequest.Builder}
     * avoiding the need to create one manually via {@link DisassociateInstanceStorageConfigRequest#builder()}
     * 
     *
     * @param disassociateInstanceStorageConfigRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DisassociateInstanceStorageConfigRequest.Builder} to
     *        create a request.
     * @return Result of the DisassociateInstanceStorageConfig operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateInstanceStorageConfig
     * @see AWS API Documentation
     */
    default DisassociateInstanceStorageConfigResponse disassociateInstanceStorageConfig(
            Consumer disassociateInstanceStorageConfigRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return disassociateInstanceStorageConfig(DisassociateInstanceStorageConfigRequest.builder()
                .applyMutation(disassociateInstanceStorageConfigRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Remove the Lambda function from the dropdown options available in the relevant flow blocks.
     * 
     *
     * @param disassociateLambdaFunctionRequest
     * @return Result of the DisassociateLambdaFunction operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateLambdaFunction
     * @see AWS API Documentation
     */
    default DisassociateLambdaFunctionResponse disassociateLambdaFunction(
            DisassociateLambdaFunctionRequest disassociateLambdaFunctionRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Remove the Lambda function from the dropdown options available in the relevant flow blocks.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DisassociateLambdaFunctionRequest.Builder} avoiding
     * the need to create one manually via {@link DisassociateLambdaFunctionRequest#builder()}
     * 
     *
     * @param disassociateLambdaFunctionRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DisassociateLambdaFunctionRequest.Builder} to create
     *        a request.
     * @return Result of the DisassociateLambdaFunction operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateLambdaFunction
     * @see AWS API Documentation
     */
    default DisassociateLambdaFunctionResponse disassociateLambdaFunction(
            Consumer disassociateLambdaFunctionRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return disassociateLambdaFunction(DisassociateLambdaFunctionRequest.builder()
                .applyMutation(disassociateLambdaFunctionRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Revokes authorization from the specified instance to access the specified Amazon Lex bot.
     * 
     *
     * @param disassociateLexBotRequest
     * @return Result of the DisassociateLexBot operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateLexBot
     * @see AWS
     *      API Documentation
     */
    default DisassociateLexBotResponse disassociateLexBot(DisassociateLexBotRequest disassociateLexBotRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Revokes authorization from the specified instance to access the specified Amazon Lex bot.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DisassociateLexBotRequest.Builder} avoiding the
     * need to create one manually via {@link DisassociateLexBotRequest#builder()}
     * 
     *
     * @param disassociateLexBotRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DisassociateLexBotRequest.Builder} to create a
     *        request.
     * @return Result of the DisassociateLexBot operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateLexBot
     * @see AWS
     *      API Documentation
     */
    default DisassociateLexBotResponse disassociateLexBot(Consumer disassociateLexBotRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return disassociateLexBot(DisassociateLexBotRequest.builder().applyMutation(disassociateLexBotRequest).build());
    }

    /**
     * 
     * Removes the flow association from a phone number claimed to your Amazon Connect instance.
     * 
     * 
     * 
     * If the number is claimed to a traffic distribution group, and you are calling this API using an instance in the
     * Amazon Web Services Region where the traffic distribution group was created, you can use either a full phone
     * number ARN or UUID value for the PhoneNumberId URI request parameter. However, if the number is
     * claimed to a traffic distribution group and you are calling this API using an instance in the alternate Amazon
     * Web Services Region associated with the traffic distribution group, you must provide a full phone number ARN. If
     * a UUID is provided in this scenario, you will receive a ResourceNotFoundException.
     * 
     * 
     *
     * @param disassociatePhoneNumberContactFlowRequest
     * @return Result of the DisassociatePhoneNumberContactFlow operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociatePhoneNumberContactFlow
     * @see AWS API Documentation
     */
    default DisassociatePhoneNumberContactFlowResponse disassociatePhoneNumberContactFlow(
            DisassociatePhoneNumberContactFlowRequest disassociatePhoneNumberContactFlowRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AccessDeniedException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Removes the flow association from a phone number claimed to your Amazon Connect instance.
     * 
     * 
     * 
     * If the number is claimed to a traffic distribution group, and you are calling this API using an instance in the
     * Amazon Web Services Region where the traffic distribution group was created, you can use either a full phone
     * number ARN or UUID value for the PhoneNumberId URI request parameter. However, if the number is
     * claimed to a traffic distribution group and you are calling this API using an instance in the alternate Amazon
     * Web Services Region associated with the traffic distribution group, you must provide a full phone number ARN. If
     * a UUID is provided in this scenario, you will receive a ResourceNotFoundException.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DisassociatePhoneNumberContactFlowRequest.Builder}
     * avoiding the need to create one manually via {@link DisassociatePhoneNumberContactFlowRequest#builder()}
     * 
     *
     * @param disassociatePhoneNumberContactFlowRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DisassociatePhoneNumberContactFlowRequest.Builder} to
     *        create a request.
     * @return Result of the DisassociatePhoneNumberContactFlow operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociatePhoneNumberContactFlow
     * @see AWS API Documentation
     */
    default DisassociatePhoneNumberContactFlowResponse disassociatePhoneNumberContactFlow(
            Consumer disassociatePhoneNumberContactFlowRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AccessDeniedException, AwsServiceException, SdkClientException, ConnectException {
        return disassociatePhoneNumberContactFlow(DisassociatePhoneNumberContactFlowRequest.builder()
                .applyMutation(disassociatePhoneNumberContactFlowRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Disassociates a set of quick connects from a queue.
     * 
     *
     * @param disassociateQueueQuickConnectsRequest
     * @return Result of the DisassociateQueueQuickConnects operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateQueueQuickConnects
     * @see AWS API Documentation
     */
    default DisassociateQueueQuickConnectsResponse disassociateQueueQuickConnects(
            DisassociateQueueQuickConnectsRequest disassociateQueueQuickConnectsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Disassociates a set of quick connects from a queue.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DisassociateQueueQuickConnectsRequest.Builder}
     * avoiding the need to create one manually via {@link DisassociateQueueQuickConnectsRequest#builder()}
     * 
     *
     * @param disassociateQueueQuickConnectsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DisassociateQueueQuickConnectsRequest.Builder} to
     *        create a request.
     * @return Result of the DisassociateQueueQuickConnects operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateQueueQuickConnects
     * @see AWS API Documentation
     */
    default DisassociateQueueQuickConnectsResponse disassociateQueueQuickConnects(
            Consumer disassociateQueueQuickConnectsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return disassociateQueueQuickConnects(DisassociateQueueQuickConnectsRequest.builder()
                .applyMutation(disassociateQueueQuickConnectsRequest).build());
    }

    /**
     * 
     * Disassociates a set of queues from a routing profile.
     * 
     *
     * @param disassociateRoutingProfileQueuesRequest
     * @return Result of the DisassociateRoutingProfileQueues operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateRoutingProfileQueues
     * @see AWS API Documentation
     */
    default DisassociateRoutingProfileQueuesResponse disassociateRoutingProfileQueues(
            DisassociateRoutingProfileQueuesRequest disassociateRoutingProfileQueuesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Disassociates a set of queues from a routing profile.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DisassociateRoutingProfileQueuesRequest.Builder}
     * avoiding the need to create one manually via {@link DisassociateRoutingProfileQueuesRequest#builder()}
     * 
     *
     * @param disassociateRoutingProfileQueuesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DisassociateRoutingProfileQueuesRequest.Builder} to
     *        create a request.
     * @return Result of the DisassociateRoutingProfileQueues operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateRoutingProfileQueues
     * @see AWS API Documentation
     */
    default DisassociateRoutingProfileQueuesResponse disassociateRoutingProfileQueues(
            Consumer disassociateRoutingProfileQueuesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return disassociateRoutingProfileQueues(DisassociateRoutingProfileQueuesRequest.builder()
                .applyMutation(disassociateRoutingProfileQueuesRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Deletes the specified security key.
     * 
     *
     * @param disassociateSecurityKeyRequest
     * @return Result of the DisassociateSecurityKey operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateSecurityKey
     * @see AWS API Documentation
     */
    default DisassociateSecurityKeyResponse disassociateSecurityKey(DisassociateSecurityKeyRequest disassociateSecurityKeyRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Deletes the specified security key.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DisassociateSecurityKeyRequest.Builder} avoiding
     * the need to create one manually via {@link DisassociateSecurityKeyRequest#builder()}
     * 
     *
     * @param disassociateSecurityKeyRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DisassociateSecurityKeyRequest.Builder} to create a
     *        request.
     * @return Result of the DisassociateSecurityKey operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateSecurityKey
     * @see AWS API Documentation
     */
    default DisassociateSecurityKeyResponse disassociateSecurityKey(
            Consumer disassociateSecurityKeyRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return disassociateSecurityKey(DisassociateSecurityKeyRequest.builder().applyMutation(disassociateSecurityKeyRequest)
                .build());
    }

    /**
     * 
     * Disassociates an agent from a traffic distribution group.
     * 
     *
     * @param disassociateTrafficDistributionGroupUserRequest
     * @return Result of the DisassociateTrafficDistributionGroupUser operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateTrafficDistributionGroupUser
     * @see AWS API Documentation
     */
    default DisassociateTrafficDistributionGroupUserResponse disassociateTrafficDistributionGroupUser(
            DisassociateTrafficDistributionGroupUserRequest disassociateTrafficDistributionGroupUserRequest)
            throws InvalidRequestException, AccessDeniedException, ThrottlingException, ResourceNotFoundException,
            ResourceConflictException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Disassociates an agent from a traffic distribution group.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the
     * {@link DisassociateTrafficDistributionGroupUserRequest.Builder} avoiding the need to create one manually via
     * {@link DisassociateTrafficDistributionGroupUserRequest#builder()}
     * 
     *
     * @param disassociateTrafficDistributionGroupUserRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DisassociateTrafficDistributionGroupUserRequest.Builder}
     *        to create a request.
     * @return Result of the DisassociateTrafficDistributionGroupUser operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateTrafficDistributionGroupUser
     * @see AWS API Documentation
     */
    default DisassociateTrafficDistributionGroupUserResponse disassociateTrafficDistributionGroupUser(
            Consumer disassociateTrafficDistributionGroupUserRequest)
            throws InvalidRequestException, AccessDeniedException, ThrottlingException, ResourceNotFoundException,
            ResourceConflictException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return disassociateTrafficDistributionGroupUser(DisassociateTrafficDistributionGroupUserRequest.builder()
                .applyMutation(disassociateTrafficDistributionGroupUserRequest).build());
    }

    /**
     * 
     * Disassociates a set of proficiencies from a user.
     * 
     *
     * @param disassociateUserProficienciesRequest
     * @return Result of the DisassociateUserProficiencies operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateUserProficiencies
     * @see AWS API Documentation
     */
    default DisassociateUserProficienciesResponse disassociateUserProficiencies(
            DisassociateUserProficienciesRequest disassociateUserProficienciesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Disassociates a set of proficiencies from a user.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DisassociateUserProficienciesRequest.Builder}
     * avoiding the need to create one manually via {@link DisassociateUserProficienciesRequest#builder()}
     * 
     *
     * @param disassociateUserProficienciesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DisassociateUserProficienciesRequest.Builder} to
     *        create a request.
     * @return Result of the DisassociateUserProficiencies operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DisassociateUserProficiencies
     * @see AWS API Documentation
     */
    default DisassociateUserProficienciesResponse disassociateUserProficiencies(
            Consumer disassociateUserProficienciesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return disassociateUserProficiencies(DisassociateUserProficienciesRequest.builder()
                .applyMutation(disassociateUserProficienciesRequest).build());
    }

    /**
     * 
     * Dismisses contacts from an agent’s CCP and returns the agent to an available state, which allows the agent to
     * receive a new routed contact. Contacts can only be dismissed if they are in a MISSED,
     * ERROR, ENDED, or REJECTED state in the Agent Event Stream.
     * 
     *
     * @param dismissUserContactRequest
     * @return Result of the DismissUserContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DismissUserContact
     * @see AWS
     *      API Documentation
     */
    default DismissUserContactResponse dismissUserContact(DismissUserContactRequest dismissUserContactRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            AccessDeniedException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Dismisses contacts from an agent’s CCP and returns the agent to an available state, which allows the agent to
     * receive a new routed contact. Contacts can only be dismissed if they are in a MISSED,
     * ERROR, ENDED, or REJECTED state in the Agent Event Stream.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link DismissUserContactRequest.Builder} avoiding the
     * need to create one manually via {@link DismissUserContactRequest#builder()}
     * 
     *
     * @param dismissUserContactRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.DismissUserContactRequest.Builder} to create a
     *        request.
     * @return Result of the DismissUserContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.DismissUserContact
     * @see AWS
     *      API Documentation
     */
    default DismissUserContactResponse dismissUserContact(Consumer dismissUserContactRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            AccessDeniedException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return dismissUserContact(DismissUserContactRequest.builder().applyMutation(dismissUserContactRequest).build());
    }

    /**
     * 
     * Provides a pre-signed URL for download of an approved attached file. This API also returns metadata about the
     * attached file. It will only return a downloadURL if the status of the attached file is APPROVED.
     * 
     *
     * @param getAttachedFileRequest
     *        Request to GetAttachedFile API.
     * @return Result of the GetAttachedFile operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetAttachedFile
     * @see AWS API
     *      Documentation
     */
    default GetAttachedFileResponse getAttachedFile(GetAttachedFileRequest getAttachedFileRequest) throws AccessDeniedException,
            InvalidRequestException, InternalServiceException, ResourceNotFoundException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Provides a pre-signed URL for download of an approved attached file. This API also returns metadata about the
     * attached file. It will only return a downloadURL if the status of the attached file is APPROVED.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link GetAttachedFileRequest.Builder} avoiding the need
     * to create one manually via {@link GetAttachedFileRequest#builder()}
     * 
     *
     * @param getAttachedFileRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.GetAttachedFileRequest.Builder} to create a request.
     *        Request to GetAttachedFile API.
     * @return Result of the GetAttachedFile operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetAttachedFile
     * @see AWS API
     *      Documentation
     */
    default GetAttachedFileResponse getAttachedFile(Consumer getAttachedFileRequest)
            throws AccessDeniedException, InvalidRequestException, InternalServiceException, ResourceNotFoundException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return getAttachedFile(GetAttachedFileRequest.builder().applyMutation(getAttachedFileRequest).build());
    }

    /**
     * 
     * Retrieves the contact attributes for the specified contact.
     * 
     *
     * @param getContactAttributesRequest
     * @return Result of the GetContactAttributes operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetContactAttributes
     * @see AWS
     *      API Documentation
     */
    default GetContactAttributesResponse getContactAttributes(GetContactAttributesRequest getContactAttributesRequest)
            throws InvalidRequestException, ResourceNotFoundException, InternalServiceException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Retrieves the contact attributes for the specified contact.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link GetContactAttributesRequest.Builder} avoiding the
     * need to create one manually via {@link GetContactAttributesRequest#builder()}
     * 
     *
     * @param getContactAttributesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.GetContactAttributesRequest.Builder} to create a
     *        request.
     * @return Result of the GetContactAttributes operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetContactAttributes
     * @see AWS
     *      API Documentation
     */
    default GetContactAttributesResponse getContactAttributes(
            Consumer getContactAttributesRequest) throws InvalidRequestException,
            ResourceNotFoundException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return getContactAttributes(GetContactAttributesRequest.builder().applyMutation(getContactAttributesRequest).build());
    }

    /**
     * 
     * Gets the real-time metric data from the specified Amazon Connect instance.
     * 
     * 
     * For a description of each metric, see Real-time Metrics
     * Definitions in the Amazon Connect Administrator Guide.
     * 
     *
     * @param getCurrentMetricDataRequest
     * @return Result of the GetCurrentMetricData operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetCurrentMetricData
     * @see AWS
     *      API Documentation
     */
    default GetCurrentMetricDataResponse getCurrentMetricData(GetCurrentMetricDataRequest getCurrentMetricDataRequest)
            throws InvalidRequestException, InvalidParameterException, InternalServiceException, ThrottlingException,
            ResourceNotFoundException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Gets the real-time metric data from the specified Amazon Connect instance.
     * 
     * 
     * For a description of each metric, see Real-time Metrics
     * Definitions in the Amazon Connect Administrator Guide.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link GetCurrentMetricDataRequest.Builder} avoiding the
     * need to create one manually via {@link GetCurrentMetricDataRequest#builder()}
     * 
     *
     * @param getCurrentMetricDataRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.GetCurrentMetricDataRequest.Builder} to create a
     *        request.
     * @return Result of the GetCurrentMetricData operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetCurrentMetricData
     * @see AWS
     *      API Documentation
     */
    default GetCurrentMetricDataResponse getCurrentMetricData(
            Consumer getCurrentMetricDataRequest) throws InvalidRequestException,
            InvalidParameterException, InternalServiceException, ThrottlingException, ResourceNotFoundException,
            AwsServiceException, SdkClientException, ConnectException {
        return getCurrentMetricData(GetCurrentMetricDataRequest.builder().applyMutation(getCurrentMetricDataRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #getCurrentMetricData(software.amazon.awssdk.services.connect.model.GetCurrentMetricDataRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.GetCurrentMetricDataIterable responses = client.getCurrentMetricDataPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.GetCurrentMetricDataIterable responses = client
     *             .getCurrentMetricDataPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.GetCurrentMetricDataResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.GetCurrentMetricDataIterable responses = client.getCurrentMetricDataPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #getCurrentMetricData(software.amazon.awssdk.services.connect.model.GetCurrentMetricDataRequest)}
     * operation.
     * 
     *
     * @param getCurrentMetricDataRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetCurrentMetricData
     * @see AWS
     *      API Documentation
     */
    default GetCurrentMetricDataIterable getCurrentMetricDataPaginator(GetCurrentMetricDataRequest getCurrentMetricDataRequest)
            throws InvalidRequestException, InvalidParameterException, InternalServiceException, ThrottlingException,
            ResourceNotFoundException, AwsServiceException, SdkClientException, ConnectException {
        return new GetCurrentMetricDataIterable(this, getCurrentMetricDataRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #getCurrentMetricData(software.amazon.awssdk.services.connect.model.GetCurrentMetricDataRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.GetCurrentMetricDataIterable responses = client.getCurrentMetricDataPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.GetCurrentMetricDataIterable responses = client
     *             .getCurrentMetricDataPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.GetCurrentMetricDataResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.GetCurrentMetricDataIterable responses = client.getCurrentMetricDataPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #getCurrentMetricData(software.amazon.awssdk.services.connect.model.GetCurrentMetricDataRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link GetCurrentMetricDataRequest.Builder} avoiding the
     * need to create one manually via {@link GetCurrentMetricDataRequest#builder()}
     * 
     *
     * @param getCurrentMetricDataRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.GetCurrentMetricDataRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetCurrentMetricData
     * @see AWS
     *      API Documentation
     */
    default GetCurrentMetricDataIterable getCurrentMetricDataPaginator(
            Consumer getCurrentMetricDataRequest) throws InvalidRequestException,
            InvalidParameterException, InternalServiceException, ThrottlingException, ResourceNotFoundException,
            AwsServiceException, SdkClientException, ConnectException {
        return getCurrentMetricDataPaginator(GetCurrentMetricDataRequest.builder().applyMutation(getCurrentMetricDataRequest)
                .build());
    }

    /**
     * 
     * Gets the real-time active user data from the specified Amazon Connect instance.
     * 
     *
     * @param getCurrentUserDataRequest
     * @return Result of the GetCurrentUserData operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetCurrentUserData
     * @see AWS
     *      API Documentation
     */
    default GetCurrentUserDataResponse getCurrentUserData(GetCurrentUserDataRequest getCurrentUserDataRequest)
            throws InvalidRequestException, InvalidParameterException, InternalServiceException, ThrottlingException,
            ResourceNotFoundException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Gets the real-time active user data from the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link GetCurrentUserDataRequest.Builder} avoiding the
     * need to create one manually via {@link GetCurrentUserDataRequest#builder()}
     * 
     *
     * @param getCurrentUserDataRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.GetCurrentUserDataRequest.Builder} to create a
     *        request.
     * @return Result of the GetCurrentUserData operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetCurrentUserData
     * @see AWS
     *      API Documentation
     */
    default GetCurrentUserDataResponse getCurrentUserData(Consumer getCurrentUserDataRequest)
            throws InvalidRequestException, InvalidParameterException, InternalServiceException, ThrottlingException,
            ResourceNotFoundException, AwsServiceException, SdkClientException, ConnectException {
        return getCurrentUserData(GetCurrentUserDataRequest.builder().applyMutation(getCurrentUserDataRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #getCurrentUserData(software.amazon.awssdk.services.connect.model.GetCurrentUserDataRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.GetCurrentUserDataIterable responses = client.getCurrentUserDataPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.GetCurrentUserDataIterable responses = client
     *             .getCurrentUserDataPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.GetCurrentUserDataResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.GetCurrentUserDataIterable responses = client.getCurrentUserDataPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #getCurrentUserData(software.amazon.awssdk.services.connect.model.GetCurrentUserDataRequest)}
     * operation.
     * 
     *
     * @param getCurrentUserDataRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetCurrentUserData
     * @see AWS
     *      API Documentation
     */
    default GetCurrentUserDataIterable getCurrentUserDataPaginator(GetCurrentUserDataRequest getCurrentUserDataRequest)
            throws InvalidRequestException, InvalidParameterException, InternalServiceException, ThrottlingException,
            ResourceNotFoundException, AwsServiceException, SdkClientException, ConnectException {
        return new GetCurrentUserDataIterable(this, getCurrentUserDataRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #getCurrentUserData(software.amazon.awssdk.services.connect.model.GetCurrentUserDataRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.GetCurrentUserDataIterable responses = client.getCurrentUserDataPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.GetCurrentUserDataIterable responses = client
     *             .getCurrentUserDataPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.GetCurrentUserDataResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.GetCurrentUserDataIterable responses = client.getCurrentUserDataPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #getCurrentUserData(software.amazon.awssdk.services.connect.model.GetCurrentUserDataRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link GetCurrentUserDataRequest.Builder} avoiding the
     * need to create one manually via {@link GetCurrentUserDataRequest#builder()}
     * 
     *
     * @param getCurrentUserDataRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.GetCurrentUserDataRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetCurrentUserData
     * @see AWS
     *      API Documentation
     */
    default GetCurrentUserDataIterable getCurrentUserDataPaginator(
            Consumer getCurrentUserDataRequest) throws InvalidRequestException,
            InvalidParameterException, InternalServiceException, ThrottlingException, ResourceNotFoundException,
            AwsServiceException, SdkClientException, ConnectException {
        return getCurrentUserDataPaginator(GetCurrentUserDataRequest.builder().applyMutation(getCurrentUserDataRequest).build());
    }

    /**
     * 
     * Supports SAML sign-in for Amazon Connect. Retrieves a token for federation. The token is for the Amazon Connect
     * user which corresponds to the IAM credentials that were used to invoke this action.
     * 
     * 
     * For more information about how SAML sign-in works in Amazon Connect, see Configure SAML with IAM for
     * Amazon Connect in the Amazon Connect Administrator Guide.
     * 
     * 
     * 
     * This API doesn't support root users. If you try to invoke GetFederationToken with root credentials, an error
     * message similar to the following one appears:
     * 
     * 
     * Provided identity: Principal: .... User: .... cannot be used for federation with Amazon Connect
     * 
     * 
     *
     * @param getFederationTokenRequest
     * @return Result of the GetFederationToken operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws UserNotFoundException
     *         No user with the specified credentials was found in the Amazon Connect instance.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetFederationToken
     * @see AWS
     *      API Documentation
     */
    default GetFederationTokenResponse getFederationToken(GetFederationTokenRequest getFederationTokenRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, UserNotFoundException,
            InternalServiceException, DuplicateResourceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Supports SAML sign-in for Amazon Connect. Retrieves a token for federation. The token is for the Amazon Connect
     * user which corresponds to the IAM credentials that were used to invoke this action.
     * 
     * 
     * For more information about how SAML sign-in works in Amazon Connect, see Configure SAML with IAM for
     * Amazon Connect in the Amazon Connect Administrator Guide.
     * 
     * 
     * 
     * This API doesn't support root users. If you try to invoke GetFederationToken with root credentials, an error
     * message similar to the following one appears:
     * 
     * 
     * Provided identity: Principal: .... User: .... cannot be used for federation with Amazon Connect
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link GetFederationTokenRequest.Builder} avoiding the
     * need to create one manually via {@link GetFederationTokenRequest#builder()}
     * 
     *
     * @param getFederationTokenRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.GetFederationTokenRequest.Builder} to create a
     *        request.
     * @return Result of the GetFederationToken operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws UserNotFoundException
     *         No user with the specified credentials was found in the Amazon Connect instance.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetFederationToken
     * @see AWS
     *      API Documentation
     */
    default GetFederationTokenResponse getFederationToken(Consumer getFederationTokenRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, UserNotFoundException,
            InternalServiceException, DuplicateResourceException, AwsServiceException, SdkClientException, ConnectException {
        return getFederationToken(GetFederationTokenRequest.builder().applyMutation(getFederationTokenRequest).build());
    }

    /**
     * 
     * Retrieves the flow associated for a given resource.
     * 
     *
     * @param getFlowAssociationRequest
     * @return Result of the GetFlowAssociation operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetFlowAssociation
     * @see AWS
     *      API Documentation
     */
    default GetFlowAssociationResponse getFlowAssociation(GetFlowAssociationRequest getFlowAssociationRequest)
            throws AccessDeniedException, ResourceNotFoundException, InternalServiceException, InvalidRequestException,
            InvalidParameterException, ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Retrieves the flow associated for a given resource.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link GetFlowAssociationRequest.Builder} avoiding the
     * need to create one manually via {@link GetFlowAssociationRequest#builder()}
     * 
     *
     * @param getFlowAssociationRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.GetFlowAssociationRequest.Builder} to create a
     *        request.
     * @return Result of the GetFlowAssociation operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetFlowAssociation
     * @see AWS
     *      API Documentation
     */
    default GetFlowAssociationResponse getFlowAssociation(Consumer getFlowAssociationRequest)
            throws AccessDeniedException, ResourceNotFoundException, InternalServiceException, InvalidRequestException,
            InvalidParameterException, ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return getFlowAssociation(GetFlowAssociationRequest.builder().applyMutation(getFlowAssociationRequest).build());
    }

    /**
     * 
     * Gets historical metric data from the specified Amazon Connect instance.
     * 
     * 
     * For a description of each historical metric, see Historical
     * Metrics Definitions in the Amazon Connect Administrator Guide.
     * 
     * 
     * 
     * We recommend using the GetMetricDataV2 API.
     * It provides more flexibility, features, and the ability to query longer time ranges than
     * GetMetricData. Use it to retrieve historical agent and contact metrics for the last 3 months, at
     * varying intervals. You can also use it to build custom dashboards to measure historical queue and agent
     * performance. For example, you can track the number of incoming contacts for the last 7 days, with data split by
     * day, to see how contact volume changed per day of the week.
     * 
     * 
     *
     * @param getMetricDataRequest
     * @return Result of the GetMetricData operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetMetricData
     * @see AWS API
     *      Documentation
     */
    default GetMetricDataResponse getMetricData(GetMetricDataRequest getMetricDataRequest) throws InvalidRequestException,
            InvalidParameterException, InternalServiceException, ThrottlingException, ResourceNotFoundException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Gets historical metric data from the specified Amazon Connect instance.
     * 
     * 
     * For a description of each historical metric, see Historical
     * Metrics Definitions in the Amazon Connect Administrator Guide.
     * 
     * 
     * 
     * We recommend using the GetMetricDataV2 API.
     * It provides more flexibility, features, and the ability to query longer time ranges than
     * GetMetricData. Use it to retrieve historical agent and contact metrics for the last 3 months, at
     * varying intervals. You can also use it to build custom dashboards to measure historical queue and agent
     * performance. For example, you can track the number of incoming contacts for the last 7 days, with data split by
     * day, to see how contact volume changed per day of the week.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link GetMetricDataRequest.Builder} avoiding the need to
     * create one manually via {@link GetMetricDataRequest#builder()}
     * 
     *
     * @param getMetricDataRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.GetMetricDataRequest.Builder} to create a request.
     * @return Result of the GetMetricData operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetMetricData
     * @see AWS API
     *      Documentation
     */
    default GetMetricDataResponse getMetricData(Consumer getMetricDataRequest)
            throws InvalidRequestException, InvalidParameterException, InternalServiceException, ThrottlingException,
            ResourceNotFoundException, AwsServiceException, SdkClientException, ConnectException {
        return getMetricData(GetMetricDataRequest.builder().applyMutation(getMetricDataRequest).build());
    }

    /**
     * 
     * This is a variant of {@link #getMetricData(software.amazon.awssdk.services.connect.model.GetMetricDataRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.GetMetricDataIterable responses = client.getMetricDataPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.GetMetricDataIterable responses = client.getMetricDataPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.GetMetricDataResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.GetMetricDataIterable responses = client.getMetricDataPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #getMetricData(software.amazon.awssdk.services.connect.model.GetMetricDataRequest)} operation.
     * 
     *
     * @param getMetricDataRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetMetricData
     * @see AWS API
     *      Documentation
     */
    default GetMetricDataIterable getMetricDataPaginator(GetMetricDataRequest getMetricDataRequest)
            throws InvalidRequestException, InvalidParameterException, InternalServiceException, ThrottlingException,
            ResourceNotFoundException, AwsServiceException, SdkClientException, ConnectException {
        return new GetMetricDataIterable(this, getMetricDataRequest);
    }

    /**
     * 
     * This is a variant of {@link #getMetricData(software.amazon.awssdk.services.connect.model.GetMetricDataRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.GetMetricDataIterable responses = client.getMetricDataPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.GetMetricDataIterable responses = client.getMetricDataPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.GetMetricDataResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.GetMetricDataIterable responses = client.getMetricDataPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #getMetricData(software.amazon.awssdk.services.connect.model.GetMetricDataRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link GetMetricDataRequest.Builder} avoiding the need to
     * create one manually via {@link GetMetricDataRequest#builder()}
     * 
     *
     * @param getMetricDataRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.GetMetricDataRequest.Builder} to create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetMetricData
     * @see AWS API
     *      Documentation
     */
    default GetMetricDataIterable getMetricDataPaginator(Consumer getMetricDataRequest)
            throws InvalidRequestException, InvalidParameterException, InternalServiceException, ThrottlingException,
            ResourceNotFoundException, AwsServiceException, SdkClientException, ConnectException {
        return getMetricDataPaginator(GetMetricDataRequest.builder().applyMutation(getMetricDataRequest).build());
    }

    /**
     * 
     * Gets metric data from the specified Amazon Connect instance.
     * 
     * 
     * GetMetricDataV2 offers more features than GetMetricData, the
     * previous version of this API. It has new metrics, offers filtering at a metric level, and offers the ability to
     * filter and group data by channels, queues, routing profiles, agents, and agent hierarchy levels. It can retrieve
     * historical data for the last 3 months, at varying intervals.
     * 
     * 
     * For a description of the historical metrics that are supported by GetMetricDataV2 and
     * GetMetricData, see Historical
     * metrics definitions in the Amazon Connect Administrator Guide.
     * 
     *
     * @param getMetricDataV2Request
     * @return Result of the GetMetricDataV2 operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetMetricDataV2
     * @see AWS API
     *      Documentation
     */
    default GetMetricDataV2Response getMetricDataV2(GetMetricDataV2Request getMetricDataV2Request)
            throws InvalidRequestException, InvalidParameterException, InternalServiceException, ThrottlingException,
            ResourceNotFoundException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Gets metric data from the specified Amazon Connect instance.
     * 
     * 
     * GetMetricDataV2 offers more features than GetMetricData, the
     * previous version of this API. It has new metrics, offers filtering at a metric level, and offers the ability to
     * filter and group data by channels, queues, routing profiles, agents, and agent hierarchy levels. It can retrieve
     * historical data for the last 3 months, at varying intervals.
     * 
     * 
     * For a description of the historical metrics that are supported by GetMetricDataV2 and
     * GetMetricData, see Historical
     * metrics definitions in the Amazon Connect Administrator Guide.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link GetMetricDataV2Request.Builder} avoiding the need
     * to create one manually via {@link GetMetricDataV2Request#builder()}
     * 
     *
     * @param getMetricDataV2Request
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.GetMetricDataV2Request.Builder} to create a request.
     * @return Result of the GetMetricDataV2 operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetMetricDataV2
     * @see AWS API
     *      Documentation
     */
    default GetMetricDataV2Response getMetricDataV2(Consumer getMetricDataV2Request)
            throws InvalidRequestException, InvalidParameterException, InternalServiceException, ThrottlingException,
            ResourceNotFoundException, AwsServiceException, SdkClientException, ConnectException {
        return getMetricDataV2(GetMetricDataV2Request.builder().applyMutation(getMetricDataV2Request).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #getMetricDataV2(software.amazon.awssdk.services.connect.model.GetMetricDataV2Request)} operation. The
     * return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
     * making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.GetMetricDataV2Iterable responses = client.getMetricDataV2Paginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.GetMetricDataV2Iterable responses = client
     *             .getMetricDataV2Paginator(request);
     *     for (software.amazon.awssdk.services.connect.model.GetMetricDataV2Response response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.GetMetricDataV2Iterable responses = client.getMetricDataV2Paginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #getMetricDataV2(software.amazon.awssdk.services.connect.model.GetMetricDataV2Request)} operation.
     * 
     *
     * @param getMetricDataV2Request
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetMetricDataV2
     * @see AWS API
     *      Documentation
     */
    default GetMetricDataV2Iterable getMetricDataV2Paginator(GetMetricDataV2Request getMetricDataV2Request)
            throws InvalidRequestException, InvalidParameterException, InternalServiceException, ThrottlingException,
            ResourceNotFoundException, AwsServiceException, SdkClientException, ConnectException {
        return new GetMetricDataV2Iterable(this, getMetricDataV2Request);
    }

    /**
     * 
     * This is a variant of
     * {@link #getMetricDataV2(software.amazon.awssdk.services.connect.model.GetMetricDataV2Request)} operation. The
     * return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
     * making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.GetMetricDataV2Iterable responses = client.getMetricDataV2Paginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.GetMetricDataV2Iterable responses = client
     *             .getMetricDataV2Paginator(request);
     *     for (software.amazon.awssdk.services.connect.model.GetMetricDataV2Response response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.GetMetricDataV2Iterable responses = client.getMetricDataV2Paginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #getMetricDataV2(software.amazon.awssdk.services.connect.model.GetMetricDataV2Request)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link GetMetricDataV2Request.Builder} avoiding the need
     * to create one manually via {@link GetMetricDataV2Request#builder()}
     * 
     *
     * @param getMetricDataV2Request
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.GetMetricDataV2Request.Builder} to create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetMetricDataV2
     * @see AWS API
     *      Documentation
     */
    default GetMetricDataV2Iterable getMetricDataV2Paginator(Consumer getMetricDataV2Request)
            throws InvalidRequestException, InvalidParameterException, InternalServiceException, ThrottlingException,
            ResourceNotFoundException, AwsServiceException, SdkClientException, ConnectException {
        return getMetricDataV2Paginator(GetMetricDataV2Request.builder().applyMutation(getMetricDataV2Request).build());
    }

    /**
     * 
     * Gets the prompt file.
     * 
     *
     * @param getPromptFileRequest
     * @return Result of the GetPromptFile operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetPromptFile
     * @see AWS API
     *      Documentation
     */
    default GetPromptFileResponse getPromptFile(GetPromptFileRequest getPromptFileRequest) throws InvalidParameterException,
            InvalidRequestException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Gets the prompt file.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link GetPromptFileRequest.Builder} avoiding the need to
     * create one manually via {@link GetPromptFileRequest#builder()}
     * 
     *
     * @param getPromptFileRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.GetPromptFileRequest.Builder} to create a request.
     * @return Result of the GetPromptFile operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetPromptFile
     * @see AWS API
     *      Documentation
     */
    default GetPromptFileResponse getPromptFile(Consumer getPromptFileRequest)
            throws InvalidParameterException, InvalidRequestException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return getPromptFile(GetPromptFileRequest.builder().applyMutation(getPromptFileRequest).build());
    }

    /**
     * 
     * Gets details about a specific task template in the specified Amazon Connect instance.
     * 
     *
     * @param getTaskTemplateRequest
     * @return Result of the GetTaskTemplate operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetTaskTemplate
     * @see AWS API
     *      Documentation
     */
    default GetTaskTemplateResponse getTaskTemplate(GetTaskTemplateRequest getTaskTemplateRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Gets details about a specific task template in the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link GetTaskTemplateRequest.Builder} avoiding the need
     * to create one manually via {@link GetTaskTemplateRequest#builder()}
     * 
     *
     * @param getTaskTemplateRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.GetTaskTemplateRequest.Builder} to create a request.
     * @return Result of the GetTaskTemplate operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetTaskTemplate
     * @see AWS API
     *      Documentation
     */
    default GetTaskTemplateResponse getTaskTemplate(Consumer getTaskTemplateRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return getTaskTemplate(GetTaskTemplateRequest.builder().applyMutation(getTaskTemplateRequest).build());
    }

    /**
     * 
     * Retrieves the current traffic distribution for a given traffic distribution group.
     * 
     *
     * @param getTrafficDistributionRequest
     * @return Result of the GetTrafficDistribution operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetTrafficDistribution
     * @see AWS API Documentation
     */
    default GetTrafficDistributionResponse getTrafficDistribution(GetTrafficDistributionRequest getTrafficDistributionRequest)
            throws InvalidRequestException, AccessDeniedException, ResourceNotFoundException, InternalServiceException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Retrieves the current traffic distribution for a given traffic distribution group.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link GetTrafficDistributionRequest.Builder} avoiding the
     * need to create one manually via {@link GetTrafficDistributionRequest#builder()}
     * 
     *
     * @param getTrafficDistributionRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.GetTrafficDistributionRequest.Builder} to create a
     *        request.
     * @return Result of the GetTrafficDistribution operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.GetTrafficDistribution
     * @see AWS API Documentation
     */
    default GetTrafficDistributionResponse getTrafficDistribution(
            Consumer getTrafficDistributionRequest) throws InvalidRequestException,
            AccessDeniedException, ResourceNotFoundException, InternalServiceException, ThrottlingException, AwsServiceException,
            SdkClientException, ConnectException {
        return getTrafficDistribution(GetTrafficDistributionRequest.builder().applyMutation(getTrafficDistributionRequest)
                .build());
    }

    /**
     * 
     * Imports a claimed phone number from an external service, such as Amazon Pinpoint, into an Amazon Connect
     * instance. You can call this API only in the same Amazon Web Services Region where the Amazon Connect instance was
     * created.
     * 
     * 
     * 
     * Call the DescribePhoneNumber
     *  API to verify the status of a previous ImportPhoneNumber operation.
     * 
     * 
     * 
     * If you plan to claim or import numbers and then release numbers frequently, contact us for a service quota
     * exception. Otherwise, it is possible you will be blocked from claiming and releasing any more numbers until up to
     * 180 days past the oldest number released has expired.
     * 
     * 
     * By default you can claim or import and then release up to 200% of your maximum number of active phone numbers. If
     * you claim or import and then release phone numbers using the UI or API during a rolling 180 day cycle that
     * exceeds 200% of your phone number service level quota, you will be blocked from claiming or importing any more
     * numbers until 180 days past the oldest number released has expired.
     * 
     * 
     * For example, if you already have 99 claimed or imported numbers and a service level quota of 99 phone numbers,
     * and in any 180 day period you release 99, claim 99, and then release 99, you will have exceeded the 200% limit.
     * At that point you are blocked from claiming any more numbers until you open an Amazon Web Services Support
     * ticket.
     * 
     *
     * @param importPhoneNumberRequest
     * @return Result of the ImportPhoneNumber operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws IdempotencyException
     *         An entity with the same name already exists.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ImportPhoneNumber
     * @see AWS API
     *      Documentation
     */
    default ImportPhoneNumberResponse importPhoneNumber(ImportPhoneNumberRequest importPhoneNumberRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            IdempotencyException, AccessDeniedException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Imports a claimed phone number from an external service, such as Amazon Pinpoint, into an Amazon Connect
     * instance. You can call this API only in the same Amazon Web Services Region where the Amazon Connect instance was
     * created.
     * 
     * 
     * 
     * Call the DescribePhoneNumber
     *  API to verify the status of a previous ImportPhoneNumber operation.
     * 
     * 
     * 
     * If you plan to claim or import numbers and then release numbers frequently, contact us for a service quota
     * exception. Otherwise, it is possible you will be blocked from claiming and releasing any more numbers until up to
     * 180 days past the oldest number released has expired.
     * 
     * 
     * By default you can claim or import and then release up to 200% of your maximum number of active phone numbers. If
     * you claim or import and then release phone numbers using the UI or API during a rolling 180 day cycle that
     * exceeds 200% of your phone number service level quota, you will be blocked from claiming or importing any more
     * numbers until 180 days past the oldest number released has expired.
     * 
     * 
     * For example, if you already have 99 claimed or imported numbers and a service level quota of 99 phone numbers,
     * and in any 180 day period you release 99, claim 99, and then release 99, you will have exceeded the 200% limit.
     * At that point you are blocked from claiming any more numbers until you open an Amazon Web Services Support
     * ticket.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ImportPhoneNumberRequest.Builder} avoiding the need
     * to create one manually via {@link ImportPhoneNumberRequest#builder()}
     * 
     *
     * @param importPhoneNumberRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ImportPhoneNumberRequest.Builder} to create a
     *        request.
     * @return Result of the ImportPhoneNumber operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws IdempotencyException
     *         An entity with the same name already exists.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ImportPhoneNumber
     * @see AWS API
     *      Documentation
     */
    default ImportPhoneNumberResponse importPhoneNumber(Consumer importPhoneNumberRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            IdempotencyException, AccessDeniedException, AwsServiceException, SdkClientException, ConnectException {
        return importPhoneNumber(ImportPhoneNumberRequest.builder().applyMutation(importPhoneNumberRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Lists agent statuses.
     * 
     *
     * @param listAgentStatusesRequest
     * @return Result of the ListAgentStatuses operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListAgentStatuses
     * @see AWS API
     *      Documentation
     */
    default ListAgentStatusesResponse listAgentStatuses(ListAgentStatusesRequest listAgentStatusesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Lists agent statuses.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListAgentStatusesRequest.Builder} avoiding the need
     * to create one manually via {@link ListAgentStatusesRequest#builder()}
     * 
     *
     * @param listAgentStatusesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListAgentStatusesRequest.Builder} to create a
     *        request.
     * @return Result of the ListAgentStatuses operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListAgentStatuses
     * @see AWS API
     *      Documentation
     */
    default ListAgentStatusesResponse listAgentStatuses(Consumer listAgentStatusesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listAgentStatuses(ListAgentStatusesRequest.builder().applyMutation(listAgentStatusesRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listAgentStatuses(software.amazon.awssdk.services.connect.model.ListAgentStatusesRequest)} operation. The
     * return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
     * making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListAgentStatusesIterable responses = client.listAgentStatusesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListAgentStatusesIterable responses = client
     *             .listAgentStatusesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListAgentStatusesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListAgentStatusesIterable responses = client.listAgentStatusesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listAgentStatuses(software.amazon.awssdk.services.connect.model.ListAgentStatusesRequest)} operation.
     * 
     *
     * @param listAgentStatusesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListAgentStatuses
     * @see AWS API
     *      Documentation
     */
    default ListAgentStatusesIterable listAgentStatusesPaginator(ListAgentStatusesRequest listAgentStatusesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return new ListAgentStatusesIterable(this, listAgentStatusesRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listAgentStatuses(software.amazon.awssdk.services.connect.model.ListAgentStatusesRequest)} operation. The
     * return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
     * making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListAgentStatusesIterable responses = client.listAgentStatusesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListAgentStatusesIterable responses = client
     *             .listAgentStatusesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListAgentStatusesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListAgentStatusesIterable responses = client.listAgentStatusesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listAgentStatuses(software.amazon.awssdk.services.connect.model.ListAgentStatusesRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListAgentStatusesRequest.Builder} avoiding the need
     * to create one manually via {@link ListAgentStatusesRequest#builder()}
     * 
     *
     * @param listAgentStatusesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListAgentStatusesRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListAgentStatuses
     * @see AWS API
     *      Documentation
     */
    default ListAgentStatusesIterable listAgentStatusesPaginator(
            Consumer listAgentStatusesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listAgentStatusesPaginator(ListAgentStatusesRequest.builder().applyMutation(listAgentStatusesRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Lists the association status of requested dataset ID for a given Amazon Connect instance.
     * 
     *
     * @param listAnalyticsDataAssociationsRequest
     * @return Result of the ListAnalyticsDataAssociations operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListAnalyticsDataAssociations
     * @see AWS API Documentation
     */
    default ListAnalyticsDataAssociationsResponse listAnalyticsDataAssociations(
            ListAnalyticsDataAssociationsRequest listAnalyticsDataAssociationsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Lists the association status of requested dataset ID for a given Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListAnalyticsDataAssociationsRequest.Builder}
     * avoiding the need to create one manually via {@link ListAnalyticsDataAssociationsRequest#builder()}
     * 
     *
     * @param listAnalyticsDataAssociationsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListAnalyticsDataAssociationsRequest.Builder} to
     *        create a request.
     * @return Result of the ListAnalyticsDataAssociations operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListAnalyticsDataAssociations
     * @see AWS API Documentation
     */
    default ListAnalyticsDataAssociationsResponse listAnalyticsDataAssociations(
            Consumer listAnalyticsDataAssociationsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listAnalyticsDataAssociations(ListAnalyticsDataAssociationsRequest.builder()
                .applyMutation(listAnalyticsDataAssociationsRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Returns a paginated list of all approved origins associated with the instance.
     * 
     *
     * @param listApprovedOriginsRequest
     * @return Result of the ListApprovedOrigins operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListApprovedOrigins
     * @see AWS
     *      API Documentation
     */
    default ListApprovedOriginsResponse listApprovedOrigins(ListApprovedOriginsRequest listApprovedOriginsRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Returns a paginated list of all approved origins associated with the instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListApprovedOriginsRequest.Builder} avoiding the
     * need to create one manually via {@link ListApprovedOriginsRequest#builder()}
     * 
     *
     * @param listApprovedOriginsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListApprovedOriginsRequest.Builder} to create a
     *        request.
     * @return Result of the ListApprovedOrigins operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListApprovedOrigins
     * @see AWS
     *      API Documentation
     */
    default ListApprovedOriginsResponse listApprovedOrigins(
            Consumer listApprovedOriginsRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return listApprovedOrigins(ListApprovedOriginsRequest.builder().applyMutation(listApprovedOriginsRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listApprovedOrigins(software.amazon.awssdk.services.connect.model.ListApprovedOriginsRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListApprovedOriginsIterable responses = client.listApprovedOriginsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListApprovedOriginsIterable responses = client
     *             .listApprovedOriginsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListApprovedOriginsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListApprovedOriginsIterable responses = client.listApprovedOriginsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listApprovedOrigins(software.amazon.awssdk.services.connect.model.ListApprovedOriginsRequest)}
     * operation.
     * 
     *
     * @param listApprovedOriginsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListApprovedOrigins
     * @see AWS
     *      API Documentation
     */
    default ListApprovedOriginsIterable listApprovedOriginsPaginator(ListApprovedOriginsRequest listApprovedOriginsRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return new ListApprovedOriginsIterable(this, listApprovedOriginsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listApprovedOrigins(software.amazon.awssdk.services.connect.model.ListApprovedOriginsRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListApprovedOriginsIterable responses = client.listApprovedOriginsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListApprovedOriginsIterable responses = client
     *             .listApprovedOriginsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListApprovedOriginsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListApprovedOriginsIterable responses = client.listApprovedOriginsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listApprovedOrigins(software.amazon.awssdk.services.connect.model.ListApprovedOriginsRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListApprovedOriginsRequest.Builder} avoiding the
     * need to create one manually via {@link ListApprovedOriginsRequest#builder()}
     * 
     *
     * @param listApprovedOriginsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListApprovedOriginsRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListApprovedOrigins
     * @see AWS
     *      API Documentation
     */
    default ListApprovedOriginsIterable listApprovedOriginsPaginator(
            Consumer listApprovedOriginsRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return listApprovedOriginsPaginator(ListApprovedOriginsRequest.builder().applyMutation(listApprovedOriginsRequest)
                .build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change. To request access to this API,
     * contact Amazon Web Services Support.
     * 
     * 
     * Provides summary information about the authentication profiles in a specified Amazon Connect instance.
     * 
     *
     * @param listAuthenticationProfilesRequest
     * @return Result of the ListAuthenticationProfiles operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListAuthenticationProfiles
     * @see AWS API Documentation
     */
    default ListAuthenticationProfilesResponse listAuthenticationProfiles(
            ListAuthenticationProfilesRequest listAuthenticationProfilesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change. To request access to this API,
     * contact Amazon Web Services Support.
     * 
     * 
     * Provides summary information about the authentication profiles in a specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListAuthenticationProfilesRequest.Builder} avoiding
     * the need to create one manually via {@link ListAuthenticationProfilesRequest#builder()}
     * 
     *
     * @param listAuthenticationProfilesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListAuthenticationProfilesRequest.Builder} to create
     *        a request.
     * @return Result of the ListAuthenticationProfiles operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListAuthenticationProfiles
     * @see AWS API Documentation
     */
    default ListAuthenticationProfilesResponse listAuthenticationProfiles(
            Consumer listAuthenticationProfilesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listAuthenticationProfiles(ListAuthenticationProfilesRequest.builder()
                .applyMutation(listAuthenticationProfilesRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listAuthenticationProfiles(software.amazon.awssdk.services.connect.model.ListAuthenticationProfilesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListAuthenticationProfilesIterable responses = client.listAuthenticationProfilesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListAuthenticationProfilesIterable responses = client
     *             .listAuthenticationProfilesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListAuthenticationProfilesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListAuthenticationProfilesIterable responses = client.listAuthenticationProfilesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listAuthenticationProfiles(software.amazon.awssdk.services.connect.model.ListAuthenticationProfilesRequest)}
     * operation.
     * 
     *
     * @param listAuthenticationProfilesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListAuthenticationProfiles
     * @see AWS API Documentation
     */
    default ListAuthenticationProfilesIterable listAuthenticationProfilesPaginator(
            ListAuthenticationProfilesRequest listAuthenticationProfilesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return new ListAuthenticationProfilesIterable(this, listAuthenticationProfilesRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listAuthenticationProfiles(software.amazon.awssdk.services.connect.model.ListAuthenticationProfilesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListAuthenticationProfilesIterable responses = client.listAuthenticationProfilesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListAuthenticationProfilesIterable responses = client
     *             .listAuthenticationProfilesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListAuthenticationProfilesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListAuthenticationProfilesIterable responses = client.listAuthenticationProfilesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listAuthenticationProfiles(software.amazon.awssdk.services.connect.model.ListAuthenticationProfilesRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListAuthenticationProfilesRequest.Builder} avoiding
     * the need to create one manually via {@link ListAuthenticationProfilesRequest#builder()}
     * 
     *
     * @param listAuthenticationProfilesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListAuthenticationProfilesRequest.Builder} to create
     *        a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListAuthenticationProfiles
     * @see AWS API Documentation
     */
    default ListAuthenticationProfilesIterable listAuthenticationProfilesPaginator(
            Consumer listAuthenticationProfilesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listAuthenticationProfilesPaginator(ListAuthenticationProfilesRequest.builder()
                .applyMutation(listAuthenticationProfilesRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * For the specified version of Amazon Lex, returns a paginated list of all the Amazon Lex bots currently associated
     * with the instance. Use this API to returns both Amazon Lex V1 and V2 bots.
     * 
     *
     * @param listBotsRequest
     * @return Result of the ListBots operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListBots
     * @see AWS API
     *      Documentation
     */
    default ListBotsResponse listBots(ListBotsRequest listBotsRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, ThrottlingException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * For the specified version of Amazon Lex, returns a paginated list of all the Amazon Lex bots currently associated
     * with the instance. Use this API to returns both Amazon Lex V1 and V2 bots.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListBotsRequest.Builder} avoiding the need to
     * create one manually via {@link ListBotsRequest#builder()}
     * 
     *
     * @param listBotsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListBotsRequest.Builder} to create a request.
     * @return Result of the ListBots operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListBots
     * @see AWS API
     *      Documentation
     */
    default ListBotsResponse listBots(Consumer listBotsRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, ThrottlingException, AwsServiceException, SdkClientException,
            ConnectException {
        return listBots(ListBotsRequest.builder().applyMutation(listBotsRequest).build());
    }

    /**
     * 
     * This is a variant of {@link #listBots(software.amazon.awssdk.services.connect.model.ListBotsRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListBotsIterable responses = client.listBotsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListBotsIterable responses = client.listBotsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListBotsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListBotsIterable responses = client.listBotsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listBots(software.amazon.awssdk.services.connect.model.ListBotsRequest)} operation.
     * 
     *
     * @param listBotsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListBots
     * @see AWS API
     *      Documentation
     */
    default ListBotsIterable listBotsPaginator(ListBotsRequest listBotsRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, ThrottlingException, AwsServiceException, SdkClientException,
            ConnectException {
        return new ListBotsIterable(this, listBotsRequest);
    }

    /**
     * 
     * This is a variant of {@link #listBots(software.amazon.awssdk.services.connect.model.ListBotsRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListBotsIterable responses = client.listBotsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListBotsIterable responses = client.listBotsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListBotsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListBotsIterable responses = client.listBotsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listBots(software.amazon.awssdk.services.connect.model.ListBotsRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListBotsRequest.Builder} avoiding the need to
     * create one manually via {@link ListBotsRequest#builder()}
     * 
     *
     * @param listBotsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListBotsRequest.Builder} to create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListBots
     * @see AWS API
     *      Documentation
     */
    default ListBotsIterable listBotsPaginator(Consumer listBotsRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return listBotsPaginator(ListBotsRequest.builder().applyMutation(listBotsRequest).build());
    }

    /**
     * 
     * Lists contact evaluations in the specified Amazon Connect instance.
     * 
     *
     * @param listContactEvaluationsRequest
     * @return Result of the ListContactEvaluations operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListContactEvaluations
     * @see AWS API Documentation
     */
    default ListContactEvaluationsResponse listContactEvaluations(ListContactEvaluationsRequest listContactEvaluationsRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Lists contact evaluations in the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListContactEvaluationsRequest.Builder} avoiding the
     * need to create one manually via {@link ListContactEvaluationsRequest#builder()}
     * 
     *
     * @param listContactEvaluationsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListContactEvaluationsRequest.Builder} to create a
     *        request.
     * @return Result of the ListContactEvaluations operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListContactEvaluations
     * @see AWS API Documentation
     */
    default ListContactEvaluationsResponse listContactEvaluations(
            Consumer listContactEvaluationsRequest) throws InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        return listContactEvaluations(ListContactEvaluationsRequest.builder().applyMutation(listContactEvaluationsRequest)
                .build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listContactEvaluations(software.amazon.awssdk.services.connect.model.ListContactEvaluationsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListContactEvaluationsIterable responses = client.listContactEvaluationsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListContactEvaluationsIterable responses = client
     *             .listContactEvaluationsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListContactEvaluationsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListContactEvaluationsIterable responses = client.listContactEvaluationsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of null won't limit the number of results you get with the paginator. It
     * only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listContactEvaluations(software.amazon.awssdk.services.connect.model.ListContactEvaluationsRequest)}
     * operation.
     * 
     *
     * @param listContactEvaluationsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListContactEvaluations
     * @see AWS API Documentation
     */
    default ListContactEvaluationsIterable listContactEvaluationsPaginator(
            ListContactEvaluationsRequest listContactEvaluationsRequest) throws InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        return new ListContactEvaluationsIterable(this, listContactEvaluationsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listContactEvaluations(software.amazon.awssdk.services.connect.model.ListContactEvaluationsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListContactEvaluationsIterable responses = client.listContactEvaluationsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListContactEvaluationsIterable responses = client
     *             .listContactEvaluationsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListContactEvaluationsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListContactEvaluationsIterable responses = client.listContactEvaluationsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of null won't limit the number of results you get with the paginator. It
     * only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listContactEvaluations(software.amazon.awssdk.services.connect.model.ListContactEvaluationsRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListContactEvaluationsRequest.Builder} avoiding the
     * need to create one manually via {@link ListContactEvaluationsRequest#builder()}
     * 
     *
     * @param listContactEvaluationsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListContactEvaluationsRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListContactEvaluations
     * @see AWS API Documentation
     */
    default ListContactEvaluationsIterable listContactEvaluationsPaginator(
            Consumer listContactEvaluationsRequest) throws InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        return listContactEvaluationsPaginator(ListContactEvaluationsRequest.builder()
                .applyMutation(listContactEvaluationsRequest).build());
    }

    /**
     * 
     * Provides information about the flow modules for the specified Amazon Connect instance.
     * 
     *
     * @param listContactFlowModulesRequest
     * @return Result of the ListContactFlowModules operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListContactFlowModules
     * @see AWS API Documentation
     */
    default ListContactFlowModulesResponse listContactFlowModules(ListContactFlowModulesRequest listContactFlowModulesRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Provides information about the flow modules for the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListContactFlowModulesRequest.Builder} avoiding the
     * need to create one manually via {@link ListContactFlowModulesRequest#builder()}
     * 
     *
     * @param listContactFlowModulesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListContactFlowModulesRequest.Builder} to create a
     *        request.
     * @return Result of the ListContactFlowModules operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListContactFlowModules
     * @see AWS API Documentation
     */
    default ListContactFlowModulesResponse listContactFlowModules(
            Consumer listContactFlowModulesRequest) throws AccessDeniedException,
            InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listContactFlowModules(ListContactFlowModulesRequest.builder().applyMutation(listContactFlowModulesRequest)
                .build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listContactFlowModules(software.amazon.awssdk.services.connect.model.ListContactFlowModulesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListContactFlowModulesIterable responses = client.listContactFlowModulesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListContactFlowModulesIterable responses = client
     *             .listContactFlowModulesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListContactFlowModulesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListContactFlowModulesIterable responses = client.listContactFlowModulesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listContactFlowModules(software.amazon.awssdk.services.connect.model.ListContactFlowModulesRequest)}
     * operation.
     * 
     *
     * @param listContactFlowModulesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListContactFlowModules
     * @see AWS API Documentation
     */
    default ListContactFlowModulesIterable listContactFlowModulesPaginator(
            ListContactFlowModulesRequest listContactFlowModulesRequest) throws AccessDeniedException, InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return new ListContactFlowModulesIterable(this, listContactFlowModulesRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listContactFlowModules(software.amazon.awssdk.services.connect.model.ListContactFlowModulesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListContactFlowModulesIterable responses = client.listContactFlowModulesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListContactFlowModulesIterable responses = client
     *             .listContactFlowModulesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListContactFlowModulesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListContactFlowModulesIterable responses = client.listContactFlowModulesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listContactFlowModules(software.amazon.awssdk.services.connect.model.ListContactFlowModulesRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListContactFlowModulesRequest.Builder} avoiding the
     * need to create one manually via {@link ListContactFlowModulesRequest#builder()}
     * 
     *
     * @param listContactFlowModulesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListContactFlowModulesRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListContactFlowModules
     * @see AWS API Documentation
     */
    default ListContactFlowModulesIterable listContactFlowModulesPaginator(
            Consumer listContactFlowModulesRequest) throws AccessDeniedException,
            InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listContactFlowModulesPaginator(ListContactFlowModulesRequest.builder()
                .applyMutation(listContactFlowModulesRequest).build());
    }

    /**
     * 
     * Provides information about the flows for the specified Amazon Connect instance.
     * 
     * 
     * You can also create and update flows using the Amazon Connect Flow
     * language.
     * 
     * 
     * For more information about flows, see Flows in the
     * Amazon Connect Administrator Guide.
     * 
     *
     * @param listContactFlowsRequest
     * @return Result of the ListContactFlows operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListContactFlows
     * @see AWS API
     *      Documentation
     */
    default ListContactFlowsResponse listContactFlows(ListContactFlowsRequest listContactFlowsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Provides information about the flows for the specified Amazon Connect instance.
     * 
     * 
     * You can also create and update flows using the Amazon Connect Flow
     * language.
     * 
     * 
     * For more information about flows, see Flows in the
     * Amazon Connect Administrator Guide.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListContactFlowsRequest.Builder} avoiding the need
     * to create one manually via {@link ListContactFlowsRequest#builder()}
     * 
     *
     * @param listContactFlowsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListContactFlowsRequest.Builder} to create a request.
     * @return Result of the ListContactFlows operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListContactFlows
     * @see AWS API
     *      Documentation
     */
    default ListContactFlowsResponse listContactFlows(Consumer listContactFlowsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listContactFlows(ListContactFlowsRequest.builder().applyMutation(listContactFlowsRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listContactFlows(software.amazon.awssdk.services.connect.model.ListContactFlowsRequest)} operation. The
     * return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
     * making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListContactFlowsIterable responses = client.listContactFlowsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListContactFlowsIterable responses = client
     *             .listContactFlowsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListContactFlowsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListContactFlowsIterable responses = client.listContactFlowsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listContactFlows(software.amazon.awssdk.services.connect.model.ListContactFlowsRequest)} operation.
     * 
     *
     * @param listContactFlowsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListContactFlows
     * @see AWS API
     *      Documentation
     */
    default ListContactFlowsIterable listContactFlowsPaginator(ListContactFlowsRequest listContactFlowsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return new ListContactFlowsIterable(this, listContactFlowsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listContactFlows(software.amazon.awssdk.services.connect.model.ListContactFlowsRequest)} operation. The
     * return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
     * making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListContactFlowsIterable responses = client.listContactFlowsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListContactFlowsIterable responses = client
     *             .listContactFlowsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListContactFlowsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListContactFlowsIterable responses = client.listContactFlowsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listContactFlows(software.amazon.awssdk.services.connect.model.ListContactFlowsRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListContactFlowsRequest.Builder} avoiding the need
     * to create one manually via {@link ListContactFlowsRequest#builder()}
     * 
     *
     * @param listContactFlowsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListContactFlowsRequest.Builder} to create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListContactFlows
     * @see AWS API
     *      Documentation
     */
    default ListContactFlowsIterable listContactFlowsPaginator(Consumer listContactFlowsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listContactFlowsPaginator(ListContactFlowsRequest.builder().applyMutation(listContactFlowsRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * For the specified referenceTypes, returns a list of references associated with the contact.
     * References are links to documents that are related to a contact, such as emails, attachments, or URLs.
     * 
     *
     * @param listContactReferencesRequest
     * @return Result of the ListContactReferences operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListContactReferences
     * @see AWS
     *      API Documentation
     */
    default ListContactReferencesResponse listContactReferences(ListContactReferencesRequest listContactReferencesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * For the specified referenceTypes, returns a list of references associated with the contact.
     * References are links to documents that are related to a contact, such as emails, attachments, or URLs.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListContactReferencesRequest.Builder} avoiding the
     * need to create one manually via {@link ListContactReferencesRequest#builder()}
     * 
     *
     * @param listContactReferencesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListContactReferencesRequest.Builder} to create a
     *        request.
     * @return Result of the ListContactReferences operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListContactReferences
     * @see AWS
     *      API Documentation
     */
    default ListContactReferencesResponse listContactReferences(
            Consumer listContactReferencesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, InternalServiceException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return listContactReferences(ListContactReferencesRequest.builder().applyMutation(listContactReferencesRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listContactReferences(software.amazon.awssdk.services.connect.model.ListContactReferencesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListContactReferencesIterable responses = client.listContactReferencesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListContactReferencesIterable responses = client
     *             .listContactReferencesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListContactReferencesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListContactReferencesIterable responses = client.listContactReferencesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of null won't limit the number of results you get with the paginator. It
     * only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listContactReferences(software.amazon.awssdk.services.connect.model.ListContactReferencesRequest)}
     * operation.
     * 
     *
     * @param listContactReferencesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListContactReferences
     * @see AWS
     *      API Documentation
     */
    default ListContactReferencesIterable listContactReferencesPaginator(ListContactReferencesRequest listContactReferencesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return new ListContactReferencesIterable(this, listContactReferencesRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listContactReferences(software.amazon.awssdk.services.connect.model.ListContactReferencesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListContactReferencesIterable responses = client.listContactReferencesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListContactReferencesIterable responses = client
     *             .listContactReferencesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListContactReferencesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListContactReferencesIterable responses = client.listContactReferencesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of null won't limit the number of results you get with the paginator. It
     * only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listContactReferences(software.amazon.awssdk.services.connect.model.ListContactReferencesRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListContactReferencesRequest.Builder} avoiding the
     * need to create one manually via {@link ListContactReferencesRequest#builder()}
     * 
     *
     * @param listContactReferencesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListContactReferencesRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListContactReferences
     * @see AWS
     *      API Documentation
     */
    default ListContactReferencesIterable listContactReferencesPaginator(
            Consumer listContactReferencesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, InternalServiceException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return listContactReferencesPaginator(ListContactReferencesRequest.builder().applyMutation(listContactReferencesRequest)
                .build());
    }

    /**
     * 
     * Lists the default vocabularies for the specified Amazon Connect instance.
     * 
     *
     * @param listDefaultVocabulariesRequest
     * @return Result of the ListDefaultVocabularies operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListDefaultVocabularies
     * @see AWS API Documentation
     */
    default ListDefaultVocabulariesResponse listDefaultVocabularies(ListDefaultVocabulariesRequest listDefaultVocabulariesRequest)
            throws InvalidRequestException, InternalServiceException, ThrottlingException, AccessDeniedException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Lists the default vocabularies for the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListDefaultVocabulariesRequest.Builder} avoiding
     * the need to create one manually via {@link ListDefaultVocabulariesRequest#builder()}
     * 
     *
     * @param listDefaultVocabulariesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListDefaultVocabulariesRequest.Builder} to create a
     *        request.
     * @return Result of the ListDefaultVocabularies operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListDefaultVocabularies
     * @see AWS API Documentation
     */
    default ListDefaultVocabulariesResponse listDefaultVocabularies(
            Consumer listDefaultVocabulariesRequest) throws InvalidRequestException,
            InternalServiceException, ThrottlingException, AccessDeniedException, AwsServiceException, SdkClientException,
            ConnectException {
        return listDefaultVocabularies(ListDefaultVocabulariesRequest.builder().applyMutation(listDefaultVocabulariesRequest)
                .build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listDefaultVocabularies(software.amazon.awssdk.services.connect.model.ListDefaultVocabulariesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListDefaultVocabulariesIterable responses = client.listDefaultVocabulariesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListDefaultVocabulariesIterable responses = client
     *             .listDefaultVocabulariesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListDefaultVocabulariesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListDefaultVocabulariesIterable responses = client.listDefaultVocabulariesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listDefaultVocabularies(software.amazon.awssdk.services.connect.model.ListDefaultVocabulariesRequest)}
     * operation.
     * 
     *
     * @param listDefaultVocabulariesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListDefaultVocabularies
     * @see AWS API Documentation
     */
    default ListDefaultVocabulariesIterable listDefaultVocabulariesPaginator(
            ListDefaultVocabulariesRequest listDefaultVocabulariesRequest) throws InvalidRequestException,
            InternalServiceException, ThrottlingException, AccessDeniedException, AwsServiceException, SdkClientException,
            ConnectException {
        return new ListDefaultVocabulariesIterable(this, listDefaultVocabulariesRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listDefaultVocabularies(software.amazon.awssdk.services.connect.model.ListDefaultVocabulariesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListDefaultVocabulariesIterable responses = client.listDefaultVocabulariesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListDefaultVocabulariesIterable responses = client
     *             .listDefaultVocabulariesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListDefaultVocabulariesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListDefaultVocabulariesIterable responses = client.listDefaultVocabulariesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listDefaultVocabularies(software.amazon.awssdk.services.connect.model.ListDefaultVocabulariesRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListDefaultVocabulariesRequest.Builder} avoiding
     * the need to create one manually via {@link ListDefaultVocabulariesRequest#builder()}
     * 
     *
     * @param listDefaultVocabulariesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListDefaultVocabulariesRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListDefaultVocabularies
     * @see AWS API Documentation
     */
    default ListDefaultVocabulariesIterable listDefaultVocabulariesPaginator(
            Consumer listDefaultVocabulariesRequest) throws InvalidRequestException,
            InternalServiceException, ThrottlingException, AccessDeniedException, AwsServiceException, SdkClientException,
            ConnectException {
        return listDefaultVocabulariesPaginator(ListDefaultVocabulariesRequest.builder()
                .applyMutation(listDefaultVocabulariesRequest).build());
    }

    /**
     * 
     * Lists versions of an evaluation form in the specified Amazon Connect instance.
     * 
     *
     * @param listEvaluationFormVersionsRequest
     * @return Result of the ListEvaluationFormVersions operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListEvaluationFormVersions
     * @see AWS API Documentation
     */
    default ListEvaluationFormVersionsResponse listEvaluationFormVersions(
            ListEvaluationFormVersionsRequest listEvaluationFormVersionsRequest) throws InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Lists versions of an evaluation form in the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListEvaluationFormVersionsRequest.Builder} avoiding
     * the need to create one manually via {@link ListEvaluationFormVersionsRequest#builder()}
     * 
     *
     * @param listEvaluationFormVersionsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListEvaluationFormVersionsRequest.Builder} to create
     *        a request.
     * @return Result of the ListEvaluationFormVersions operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListEvaluationFormVersions
     * @see AWS API Documentation
     */
    default ListEvaluationFormVersionsResponse listEvaluationFormVersions(
            Consumer listEvaluationFormVersionsRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listEvaluationFormVersions(ListEvaluationFormVersionsRequest.builder()
                .applyMutation(listEvaluationFormVersionsRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listEvaluationFormVersions(software.amazon.awssdk.services.connect.model.ListEvaluationFormVersionsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListEvaluationFormVersionsIterable responses = client.listEvaluationFormVersionsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListEvaluationFormVersionsIterable responses = client
     *             .listEvaluationFormVersionsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListEvaluationFormVersionsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListEvaluationFormVersionsIterable responses = client.listEvaluationFormVersionsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listEvaluationFormVersions(software.amazon.awssdk.services.connect.model.ListEvaluationFormVersionsRequest)}
     * operation.
     * 
     *
     * @param listEvaluationFormVersionsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListEvaluationFormVersions
     * @see AWS API Documentation
     */
    default ListEvaluationFormVersionsIterable listEvaluationFormVersionsPaginator(
            ListEvaluationFormVersionsRequest listEvaluationFormVersionsRequest) throws InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        return new ListEvaluationFormVersionsIterable(this, listEvaluationFormVersionsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listEvaluationFormVersions(software.amazon.awssdk.services.connect.model.ListEvaluationFormVersionsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListEvaluationFormVersionsIterable responses = client.listEvaluationFormVersionsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListEvaluationFormVersionsIterable responses = client
     *             .listEvaluationFormVersionsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListEvaluationFormVersionsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListEvaluationFormVersionsIterable responses = client.listEvaluationFormVersionsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listEvaluationFormVersions(software.amazon.awssdk.services.connect.model.ListEvaluationFormVersionsRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListEvaluationFormVersionsRequest.Builder} avoiding
     * the need to create one manually via {@link ListEvaluationFormVersionsRequest#builder()}
     * 
     *
     * @param listEvaluationFormVersionsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListEvaluationFormVersionsRequest.Builder} to create
     *        a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListEvaluationFormVersions
     * @see AWS API Documentation
     */
    default ListEvaluationFormVersionsIterable listEvaluationFormVersionsPaginator(
            Consumer listEvaluationFormVersionsRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listEvaluationFormVersionsPaginator(ListEvaluationFormVersionsRequest.builder()
                .applyMutation(listEvaluationFormVersionsRequest).build());
    }

    /**
     * 
     * Lists evaluation forms in the specified Amazon Connect instance.
     * 
     *
     * @param listEvaluationFormsRequest
     * @return Result of the ListEvaluationForms operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListEvaluationForms
     * @see AWS
     *      API Documentation
     */
    default ListEvaluationFormsResponse listEvaluationForms(ListEvaluationFormsRequest listEvaluationFormsRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Lists evaluation forms in the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListEvaluationFormsRequest.Builder} avoiding the
     * need to create one manually via {@link ListEvaluationFormsRequest#builder()}
     * 
     *
     * @param listEvaluationFormsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListEvaluationFormsRequest.Builder} to create a
     *        request.
     * @return Result of the ListEvaluationForms operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListEvaluationForms
     * @see AWS
     *      API Documentation
     */
    default ListEvaluationFormsResponse listEvaluationForms(
            Consumer listEvaluationFormsRequest) throws InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        return listEvaluationForms(ListEvaluationFormsRequest.builder().applyMutation(listEvaluationFormsRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listEvaluationForms(software.amazon.awssdk.services.connect.model.ListEvaluationFormsRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListEvaluationFormsIterable responses = client.listEvaluationFormsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListEvaluationFormsIterable responses = client
     *             .listEvaluationFormsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListEvaluationFormsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListEvaluationFormsIterable responses = client.listEvaluationFormsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listEvaluationForms(software.amazon.awssdk.services.connect.model.ListEvaluationFormsRequest)}
     * operation.
     * 
     *
     * @param listEvaluationFormsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListEvaluationForms
     * @see AWS
     *      API Documentation
     */
    default ListEvaluationFormsIterable listEvaluationFormsPaginator(ListEvaluationFormsRequest listEvaluationFormsRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return new ListEvaluationFormsIterable(this, listEvaluationFormsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listEvaluationForms(software.amazon.awssdk.services.connect.model.ListEvaluationFormsRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListEvaluationFormsIterable responses = client.listEvaluationFormsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListEvaluationFormsIterable responses = client
     *             .listEvaluationFormsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListEvaluationFormsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListEvaluationFormsIterable responses = client.listEvaluationFormsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listEvaluationForms(software.amazon.awssdk.services.connect.model.ListEvaluationFormsRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListEvaluationFormsRequest.Builder} avoiding the
     * need to create one manually via {@link ListEvaluationFormsRequest#builder()}
     * 
     *
     * @param listEvaluationFormsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListEvaluationFormsRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListEvaluationForms
     * @see AWS
     *      API Documentation
     */
    default ListEvaluationFormsIterable listEvaluationFormsPaginator(
            Consumer listEvaluationFormsRequest) throws InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        return listEvaluationFormsPaginator(ListEvaluationFormsRequest.builder().applyMutation(listEvaluationFormsRequest)
                .build());
    }

    /**
     * 
     * List the flow association based on the filters.
     * 
     *
     * @param listFlowAssociationsRequest
     * @return Result of the ListFlowAssociations operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListFlowAssociations
     * @see AWS
     *      API Documentation
     */
    default ListFlowAssociationsResponse listFlowAssociations(ListFlowAssociationsRequest listFlowAssociationsRequest)
            throws AccessDeniedException, ResourceNotFoundException, InternalServiceException, InvalidRequestException,
            InvalidParameterException, ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * List the flow association based on the filters.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListFlowAssociationsRequest.Builder} avoiding the
     * need to create one manually via {@link ListFlowAssociationsRequest#builder()}
     * 
     *
     * @param listFlowAssociationsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListFlowAssociationsRequest.Builder} to create a
     *        request.
     * @return Result of the ListFlowAssociations operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListFlowAssociations
     * @see AWS
     *      API Documentation
     */
    default ListFlowAssociationsResponse listFlowAssociations(
            Consumer listFlowAssociationsRequest) throws AccessDeniedException,
            ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return listFlowAssociations(ListFlowAssociationsRequest.builder().applyMutation(listFlowAssociationsRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listFlowAssociations(software.amazon.awssdk.services.connect.model.ListFlowAssociationsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListFlowAssociationsIterable responses = client.listFlowAssociationsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListFlowAssociationsIterable responses = client
     *             .listFlowAssociationsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListFlowAssociationsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListFlowAssociationsIterable responses = client.listFlowAssociationsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listFlowAssociations(software.amazon.awssdk.services.connect.model.ListFlowAssociationsRequest)}
     * operation.
     * 
     *
     * @param listFlowAssociationsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListFlowAssociations
     * @see AWS
     *      API Documentation
     */
    default ListFlowAssociationsIterable listFlowAssociationsPaginator(ListFlowAssociationsRequest listFlowAssociationsRequest)
            throws AccessDeniedException, ResourceNotFoundException, InternalServiceException, InvalidRequestException,
            InvalidParameterException, ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return new ListFlowAssociationsIterable(this, listFlowAssociationsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listFlowAssociations(software.amazon.awssdk.services.connect.model.ListFlowAssociationsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListFlowAssociationsIterable responses = client.listFlowAssociationsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListFlowAssociationsIterable responses = client
     *             .listFlowAssociationsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListFlowAssociationsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListFlowAssociationsIterable responses = client.listFlowAssociationsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listFlowAssociations(software.amazon.awssdk.services.connect.model.ListFlowAssociationsRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListFlowAssociationsRequest.Builder} avoiding the
     * need to create one manually via {@link ListFlowAssociationsRequest#builder()}
     * 
     *
     * @param listFlowAssociationsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListFlowAssociationsRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListFlowAssociations
     * @see AWS
     *      API Documentation
     */
    default ListFlowAssociationsIterable listFlowAssociationsPaginator(
            Consumer listFlowAssociationsRequest) throws AccessDeniedException,
            ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return listFlowAssociationsPaginator(ListFlowAssociationsRequest.builder().applyMutation(listFlowAssociationsRequest)
                .build());
    }

    /**
     * 
     * Provides information about the hours of operation for the specified Amazon Connect instance.
     * 
     * 
     * For more information about hours of operation, see Set the Hours of Operation
     * for a Queue in the Amazon Connect Administrator Guide.
     * 
     *
     * @param listHoursOfOperationsRequest
     * @return Result of the ListHoursOfOperations operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListHoursOfOperations
     * @see AWS
     *      API Documentation
     */
    default ListHoursOfOperationsResponse listHoursOfOperations(ListHoursOfOperationsRequest listHoursOfOperationsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Provides information about the hours of operation for the specified Amazon Connect instance.
     * 
     * 
     * For more information about hours of operation, see Set the Hours of Operation
     * for a Queue in the Amazon Connect Administrator Guide.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListHoursOfOperationsRequest.Builder} avoiding the
     * need to create one manually via {@link ListHoursOfOperationsRequest#builder()}
     * 
     *
     * @param listHoursOfOperationsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListHoursOfOperationsRequest.Builder} to create a
     *        request.
     * @return Result of the ListHoursOfOperations operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListHoursOfOperations
     * @see AWS
     *      API Documentation
     */
    default ListHoursOfOperationsResponse listHoursOfOperations(
            Consumer listHoursOfOperationsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listHoursOfOperations(ListHoursOfOperationsRequest.builder().applyMutation(listHoursOfOperationsRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listHoursOfOperations(software.amazon.awssdk.services.connect.model.ListHoursOfOperationsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListHoursOfOperationsIterable responses = client.listHoursOfOperationsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListHoursOfOperationsIterable responses = client
     *             .listHoursOfOperationsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListHoursOfOperationsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListHoursOfOperationsIterable responses = client.listHoursOfOperationsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listHoursOfOperations(software.amazon.awssdk.services.connect.model.ListHoursOfOperationsRequest)}
     * operation.
     * 
     *
     * @param listHoursOfOperationsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListHoursOfOperations
     * @see AWS
     *      API Documentation
     */
    default ListHoursOfOperationsIterable listHoursOfOperationsPaginator(ListHoursOfOperationsRequest listHoursOfOperationsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return new ListHoursOfOperationsIterable(this, listHoursOfOperationsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listHoursOfOperations(software.amazon.awssdk.services.connect.model.ListHoursOfOperationsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListHoursOfOperationsIterable responses = client.listHoursOfOperationsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListHoursOfOperationsIterable responses = client
     *             .listHoursOfOperationsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListHoursOfOperationsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListHoursOfOperationsIterable responses = client.listHoursOfOperationsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listHoursOfOperations(software.amazon.awssdk.services.connect.model.ListHoursOfOperationsRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListHoursOfOperationsRequest.Builder} avoiding the
     * need to create one manually via {@link ListHoursOfOperationsRequest#builder()}
     * 
     *
     * @param listHoursOfOperationsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListHoursOfOperationsRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListHoursOfOperations
     * @see AWS
     *      API Documentation
     */
    default ListHoursOfOperationsIterable listHoursOfOperationsPaginator(
            Consumer listHoursOfOperationsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listHoursOfOperationsPaginator(ListHoursOfOperationsRequest.builder().applyMutation(listHoursOfOperationsRequest)
                .build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Returns a paginated list of all attribute types for the given instance.
     * 
     *
     * @param listInstanceAttributesRequest
     * @return Result of the ListInstanceAttributes operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListInstanceAttributes
     * @see AWS API Documentation
     */
    default ListInstanceAttributesResponse listInstanceAttributes(ListInstanceAttributesRequest listInstanceAttributesRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Returns a paginated list of all attribute types for the given instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListInstanceAttributesRequest.Builder} avoiding the
     * need to create one manually via {@link ListInstanceAttributesRequest#builder()}
     * 
     *
     * @param listInstanceAttributesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListInstanceAttributesRequest.Builder} to create a
     *        request.
     * @return Result of the ListInstanceAttributes operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListInstanceAttributes
     * @see AWS API Documentation
     */
    default ListInstanceAttributesResponse listInstanceAttributes(
            Consumer listInstanceAttributesRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return listInstanceAttributes(ListInstanceAttributesRequest.builder().applyMutation(listInstanceAttributesRequest)
                .build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listInstanceAttributes(software.amazon.awssdk.services.connect.model.ListInstanceAttributesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListInstanceAttributesIterable responses = client.listInstanceAttributesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListInstanceAttributesIterable responses = client
     *             .listInstanceAttributesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListInstanceAttributesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListInstanceAttributesIterable responses = client.listInstanceAttributesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listInstanceAttributes(software.amazon.awssdk.services.connect.model.ListInstanceAttributesRequest)}
     * operation.
     * 
     *
     * @param listInstanceAttributesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListInstanceAttributes
     * @see AWS API Documentation
     */
    default ListInstanceAttributesIterable listInstanceAttributesPaginator(
            ListInstanceAttributesRequest listInstanceAttributesRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return new ListInstanceAttributesIterable(this, listInstanceAttributesRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listInstanceAttributes(software.amazon.awssdk.services.connect.model.ListInstanceAttributesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListInstanceAttributesIterable responses = client.listInstanceAttributesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListInstanceAttributesIterable responses = client
     *             .listInstanceAttributesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListInstanceAttributesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListInstanceAttributesIterable responses = client.listInstanceAttributesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listInstanceAttributes(software.amazon.awssdk.services.connect.model.ListInstanceAttributesRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListInstanceAttributesRequest.Builder} avoiding the
     * need to create one manually via {@link ListInstanceAttributesRequest#builder()}
     * 
     *
     * @param listInstanceAttributesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListInstanceAttributesRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListInstanceAttributes
     * @see AWS API Documentation
     */
    default ListInstanceAttributesIterable listInstanceAttributesPaginator(
            Consumer listInstanceAttributesRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return listInstanceAttributesPaginator(ListInstanceAttributesRequest.builder()
                .applyMutation(listInstanceAttributesRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Returns a paginated list of storage configs for the identified instance and resource type.
     * 
     *
     * @param listInstanceStorageConfigsRequest
     * @return Result of the ListInstanceStorageConfigs operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListInstanceStorageConfigs
     * @see AWS API Documentation
     */
    default ListInstanceStorageConfigsResponse listInstanceStorageConfigs(
            ListInstanceStorageConfigsRequest listInstanceStorageConfigsRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Returns a paginated list of storage configs for the identified instance and resource type.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListInstanceStorageConfigsRequest.Builder} avoiding
     * the need to create one manually via {@link ListInstanceStorageConfigsRequest#builder()}
     * 
     *
     * @param listInstanceStorageConfigsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListInstanceStorageConfigsRequest.Builder} to create
     *        a request.
     * @return Result of the ListInstanceStorageConfigs operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListInstanceStorageConfigs
     * @see AWS API Documentation
     */
    default ListInstanceStorageConfigsResponse listInstanceStorageConfigs(
            Consumer listInstanceStorageConfigsRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return listInstanceStorageConfigs(ListInstanceStorageConfigsRequest.builder()
                .applyMutation(listInstanceStorageConfigsRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listInstanceStorageConfigs(software.amazon.awssdk.services.connect.model.ListInstanceStorageConfigsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListInstanceStorageConfigsIterable responses = client.listInstanceStorageConfigsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListInstanceStorageConfigsIterable responses = client
     *             .listInstanceStorageConfigsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListInstanceStorageConfigsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListInstanceStorageConfigsIterable responses = client.listInstanceStorageConfigsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listInstanceStorageConfigs(software.amazon.awssdk.services.connect.model.ListInstanceStorageConfigsRequest)}
     * operation.
     * 
     *
     * @param listInstanceStorageConfigsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListInstanceStorageConfigs
     * @see AWS API Documentation
     */
    default ListInstanceStorageConfigsIterable listInstanceStorageConfigsPaginator(
            ListInstanceStorageConfigsRequest listInstanceStorageConfigsRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return new ListInstanceStorageConfigsIterable(this, listInstanceStorageConfigsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listInstanceStorageConfigs(software.amazon.awssdk.services.connect.model.ListInstanceStorageConfigsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListInstanceStorageConfigsIterable responses = client.listInstanceStorageConfigsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListInstanceStorageConfigsIterable responses = client
     *             .listInstanceStorageConfigsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListInstanceStorageConfigsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListInstanceStorageConfigsIterable responses = client.listInstanceStorageConfigsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listInstanceStorageConfigs(software.amazon.awssdk.services.connect.model.ListInstanceStorageConfigsRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListInstanceStorageConfigsRequest.Builder} avoiding
     * the need to create one manually via {@link ListInstanceStorageConfigsRequest#builder()}
     * 
     *
     * @param listInstanceStorageConfigsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListInstanceStorageConfigsRequest.Builder} to create
     *        a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListInstanceStorageConfigs
     * @see AWS API Documentation
     */
    default ListInstanceStorageConfigsIterable listInstanceStorageConfigsPaginator(
            Consumer listInstanceStorageConfigsRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return listInstanceStorageConfigsPaginator(ListInstanceStorageConfigsRequest.builder()
                .applyMutation(listInstanceStorageConfigsRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Return a list of instances which are in active state, creation-in-progress state, and failed state. Instances
     * that aren't successfully created (they are in a failed state) are returned only for 24 hours after the
     * CreateInstance API was invoked.
     * 
     *
     * @param listInstancesRequest
     * @return Result of the ListInstances operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListInstances
     * @see AWS API
     *      Documentation
     */
    default ListInstancesResponse listInstances(ListInstancesRequest listInstancesRequest) throws InvalidRequestException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Return a list of instances which are in active state, creation-in-progress state, and failed state. Instances
     * that aren't successfully created (they are in a failed state) are returned only for 24 hours after the
     * CreateInstance API was invoked.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListInstancesRequest.Builder} avoiding the need to
     * create one manually via {@link ListInstancesRequest#builder()}
     * 
     *
     * @param listInstancesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListInstancesRequest.Builder} to create a request.
     * @return Result of the ListInstances operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListInstances
     * @see AWS API
     *      Documentation
     */
    default ListInstancesResponse listInstances(Consumer listInstancesRequest)
            throws InvalidRequestException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listInstances(ListInstancesRequest.builder().applyMutation(listInstancesRequest).build());
    }

    /**
     * 
     * This is a variant of {@link #listInstances(software.amazon.awssdk.services.connect.model.ListInstancesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListInstancesIterable responses = client.listInstancesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListInstancesIterable responses = client.listInstancesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListInstancesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListInstancesIterable responses = client.listInstancesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listInstances(software.amazon.awssdk.services.connect.model.ListInstancesRequest)} operation.
     * 
     *
     * @param listInstancesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListInstances
     * @see AWS API
     *      Documentation
     */
    default ListInstancesIterable listInstancesPaginator(ListInstancesRequest listInstancesRequest)
            throws InvalidRequestException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return new ListInstancesIterable(this, listInstancesRequest);
    }

    /**
     * 
     * This is a variant of {@link #listInstances(software.amazon.awssdk.services.connect.model.ListInstancesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListInstancesIterable responses = client.listInstancesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListInstancesIterable responses = client.listInstancesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListInstancesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListInstancesIterable responses = client.listInstancesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listInstances(software.amazon.awssdk.services.connect.model.ListInstancesRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListInstancesRequest.Builder} avoiding the need to
     * create one manually via {@link ListInstancesRequest#builder()}
     * 
     *
     * @param listInstancesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListInstancesRequest.Builder} to create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListInstances
     * @see AWS API
     *      Documentation
     */
    default ListInstancesIterable listInstancesPaginator(Consumer listInstancesRequest)
            throws InvalidRequestException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listInstancesPaginator(ListInstancesRequest.builder().applyMutation(listInstancesRequest).build());
    }

    /**
     * 
     * Provides summary information about the Amazon Web Services resource associations for the specified Amazon Connect
     * instance.
     * 
     *
     * @param listIntegrationAssociationsRequest
     * @return Result of the ListIntegrationAssociations operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListIntegrationAssociations
     * @see AWS API Documentation
     */
    default ListIntegrationAssociationsResponse listIntegrationAssociations(
            ListIntegrationAssociationsRequest listIntegrationAssociationsRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, ThrottlingException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Provides summary information about the Amazon Web Services resource associations for the specified Amazon Connect
     * instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListIntegrationAssociationsRequest.Builder}
     * avoiding the need to create one manually via {@link ListIntegrationAssociationsRequest#builder()}
     * 
     *
     * @param listIntegrationAssociationsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListIntegrationAssociationsRequest.Builder} to create
     *        a request.
     * @return Result of the ListIntegrationAssociations operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListIntegrationAssociations
     * @see AWS API Documentation
     */
    default ListIntegrationAssociationsResponse listIntegrationAssociations(
            Consumer listIntegrationAssociationsRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return listIntegrationAssociations(ListIntegrationAssociationsRequest.builder()
                .applyMutation(listIntegrationAssociationsRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listIntegrationAssociations(software.amazon.awssdk.services.connect.model.ListIntegrationAssociationsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListIntegrationAssociationsIterable responses = client.listIntegrationAssociationsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListIntegrationAssociationsIterable responses = client
     *             .listIntegrationAssociationsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListIntegrationAssociationsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListIntegrationAssociationsIterable responses = client.listIntegrationAssociationsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listIntegrationAssociations(software.amazon.awssdk.services.connect.model.ListIntegrationAssociationsRequest)}
     * operation.
     * 
     *
     * @param listIntegrationAssociationsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListIntegrationAssociations
     * @see AWS API Documentation
     */
    default ListIntegrationAssociationsIterable listIntegrationAssociationsPaginator(
            ListIntegrationAssociationsRequest listIntegrationAssociationsRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, ThrottlingException, AwsServiceException, SdkClientException,
            ConnectException {
        return new ListIntegrationAssociationsIterable(this, listIntegrationAssociationsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listIntegrationAssociations(software.amazon.awssdk.services.connect.model.ListIntegrationAssociationsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListIntegrationAssociationsIterable responses = client.listIntegrationAssociationsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListIntegrationAssociationsIterable responses = client
     *             .listIntegrationAssociationsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListIntegrationAssociationsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListIntegrationAssociationsIterable responses = client.listIntegrationAssociationsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listIntegrationAssociations(software.amazon.awssdk.services.connect.model.ListIntegrationAssociationsRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListIntegrationAssociationsRequest.Builder}
     * avoiding the need to create one manually via {@link ListIntegrationAssociationsRequest#builder()}
     * 
     *
     * @param listIntegrationAssociationsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListIntegrationAssociationsRequest.Builder} to create
     *        a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListIntegrationAssociations
     * @see AWS API Documentation
     */
    default ListIntegrationAssociationsIterable listIntegrationAssociationsPaginator(
            Consumer listIntegrationAssociationsRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return listIntegrationAssociationsPaginator(ListIntegrationAssociationsRequest.builder()
                .applyMutation(listIntegrationAssociationsRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Returns a paginated list of all Lambda functions that display in the dropdown options in the relevant flow
     * blocks.
     * 
     *
     * @param listLambdaFunctionsRequest
     * @return Result of the ListLambdaFunctions operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListLambdaFunctions
     * @see AWS
     *      API Documentation
     */
    default ListLambdaFunctionsResponse listLambdaFunctions(ListLambdaFunctionsRequest listLambdaFunctionsRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Returns a paginated list of all Lambda functions that display in the dropdown options in the relevant flow
     * blocks.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListLambdaFunctionsRequest.Builder} avoiding the
     * need to create one manually via {@link ListLambdaFunctionsRequest#builder()}
     * 
     *
     * @param listLambdaFunctionsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListLambdaFunctionsRequest.Builder} to create a
     *        request.
     * @return Result of the ListLambdaFunctions operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListLambdaFunctions
     * @see AWS
     *      API Documentation
     */
    default ListLambdaFunctionsResponse listLambdaFunctions(
            Consumer listLambdaFunctionsRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return listLambdaFunctions(ListLambdaFunctionsRequest.builder().applyMutation(listLambdaFunctionsRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listLambdaFunctions(software.amazon.awssdk.services.connect.model.ListLambdaFunctionsRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListLambdaFunctionsIterable responses = client.listLambdaFunctionsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListLambdaFunctionsIterable responses = client
     *             .listLambdaFunctionsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListLambdaFunctionsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListLambdaFunctionsIterable responses = client.listLambdaFunctionsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listLambdaFunctions(software.amazon.awssdk.services.connect.model.ListLambdaFunctionsRequest)}
     * operation.
     * 
     *
     * @param listLambdaFunctionsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListLambdaFunctions
     * @see AWS
     *      API Documentation
     */
    default ListLambdaFunctionsIterable listLambdaFunctionsPaginator(ListLambdaFunctionsRequest listLambdaFunctionsRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return new ListLambdaFunctionsIterable(this, listLambdaFunctionsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listLambdaFunctions(software.amazon.awssdk.services.connect.model.ListLambdaFunctionsRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListLambdaFunctionsIterable responses = client.listLambdaFunctionsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListLambdaFunctionsIterable responses = client
     *             .listLambdaFunctionsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListLambdaFunctionsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListLambdaFunctionsIterable responses = client.listLambdaFunctionsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listLambdaFunctions(software.amazon.awssdk.services.connect.model.ListLambdaFunctionsRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListLambdaFunctionsRequest.Builder} avoiding the
     * need to create one manually via {@link ListLambdaFunctionsRequest#builder()}
     * 
     *
     * @param listLambdaFunctionsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListLambdaFunctionsRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListLambdaFunctions
     * @see AWS
     *      API Documentation
     */
    default ListLambdaFunctionsIterable listLambdaFunctionsPaginator(
            Consumer listLambdaFunctionsRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return listLambdaFunctionsPaginator(ListLambdaFunctionsRequest.builder().applyMutation(listLambdaFunctionsRequest)
                .build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Returns a paginated list of all the Amazon Lex V1 bots currently associated with the instance. To return both
     * Amazon Lex V1 and V2 bots, use the ListBots API.
     * 
     *
     * @param listLexBotsRequest
     * @return Result of the ListLexBots operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListLexBots
     * @see AWS API
     *      Documentation
     */
    default ListLexBotsResponse listLexBots(ListLexBotsRequest listLexBotsRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Returns a paginated list of all the Amazon Lex V1 bots currently associated with the instance. To return both
     * Amazon Lex V1 and V2 bots, use the ListBots API.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListLexBotsRequest.Builder} avoiding the need to
     * create one manually via {@link ListLexBotsRequest#builder()}
     * 
     *
     * @param listLexBotsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListLexBotsRequest.Builder} to create a request.
     * @return Result of the ListLexBots operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListLexBots
     * @see AWS API
     *      Documentation
     */
    default ListLexBotsResponse listLexBots(Consumer listLexBotsRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return listLexBots(ListLexBotsRequest.builder().applyMutation(listLexBotsRequest).build());
    }

    /**
     * 
     * This is a variant of {@link #listLexBots(software.amazon.awssdk.services.connect.model.ListLexBotsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListLexBotsIterable responses = client.listLexBotsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListLexBotsIterable responses = client.listLexBotsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListLexBotsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListLexBotsIterable responses = client.listLexBotsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listLexBots(software.amazon.awssdk.services.connect.model.ListLexBotsRequest)} operation.
     * 
     *
     * @param listLexBotsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListLexBots
     * @see AWS API
     *      Documentation
     */
    default ListLexBotsIterable listLexBotsPaginator(ListLexBotsRequest listLexBotsRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return new ListLexBotsIterable(this, listLexBotsRequest);
    }

    /**
     * 
     * This is a variant of {@link #listLexBots(software.amazon.awssdk.services.connect.model.ListLexBotsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListLexBotsIterable responses = client.listLexBotsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListLexBotsIterable responses = client.listLexBotsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListLexBotsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListLexBotsIterable responses = client.listLexBotsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listLexBots(software.amazon.awssdk.services.connect.model.ListLexBotsRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListLexBotsRequest.Builder} avoiding the need to
     * create one manually via {@link ListLexBotsRequest#builder()}
     * 
     *
     * @param listLexBotsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListLexBotsRequest.Builder} to create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListLexBots
     * @see AWS API
     *      Documentation
     */
    default ListLexBotsIterable listLexBotsPaginator(Consumer listLexBotsRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return listLexBotsPaginator(ListLexBotsRequest.builder().applyMutation(listLexBotsRequest).build());
    }

    /**
     * 
     * Provides information about the phone numbers for the specified Amazon Connect instance.
     * 
     * 
     * For more information about phone numbers, see Set Up Phone
     * Numbers for Your Contact Center in the Amazon Connect Administrator Guide.
     * 
     * 
     * 
     * 
     * 
     * We recommend using ListPhoneNumbersV2
     * to return phone number types. ListPhoneNumbers doesn't support number types UIFN,
     * SHARED, THIRD_PARTY_TF, and THIRD_PARTY_DID. While it returns numbers of
     * those types, it incorrectly lists them as TOLL_FREE or DID.
     * 
     * 
     * 
     * 
     * The phone number Arn value that is returned from each of the items in the PhoneNumberSummaryList cannot be used to tag phone number resources. It will fail with a
     * ResourceNotFoundException. Instead, use the ListPhoneNumbersV2
     * API. It returns the new phone number ARN that can be used to tag phone number resources.
     * 
     * 
     * 
     * 
     *
     * @param listPhoneNumbersRequest
     * @return Result of the ListPhoneNumbers operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListPhoneNumbers
     * @see AWS API
     *      Documentation
     */
    default ListPhoneNumbersResponse listPhoneNumbers(ListPhoneNumbersRequest listPhoneNumbersRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Provides information about the phone numbers for the specified Amazon Connect instance.
     * 
     * 
     * For more information about phone numbers, see Set Up Phone
     * Numbers for Your Contact Center in the Amazon Connect Administrator Guide.
     * 
     * 
     * 
     * 
     * 
     * We recommend using ListPhoneNumbersV2
     * to return phone number types. ListPhoneNumbers doesn't support number types UIFN,
     * SHARED, THIRD_PARTY_TF, and THIRD_PARTY_DID. While it returns numbers of
     * those types, it incorrectly lists them as TOLL_FREE or DID.
     * 
     * 
     * 
     * 
     * The phone number Arn value that is returned from each of the items in the PhoneNumberSummaryList cannot be used to tag phone number resources. It will fail with a
     * ResourceNotFoundException. Instead, use the ListPhoneNumbersV2
     * API. It returns the new phone number ARN that can be used to tag phone number resources.
     * 
     * 
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListPhoneNumbersRequest.Builder} avoiding the need
     * to create one manually via {@link ListPhoneNumbersRequest#builder()}
     * 
     *
     * @param listPhoneNumbersRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListPhoneNumbersRequest.Builder} to create a request.
     * @return Result of the ListPhoneNumbers operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListPhoneNumbers
     * @see AWS API
     *      Documentation
     */
    default ListPhoneNumbersResponse listPhoneNumbers(Consumer listPhoneNumbersRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listPhoneNumbers(ListPhoneNumbersRequest.builder().applyMutation(listPhoneNumbersRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listPhoneNumbers(software.amazon.awssdk.services.connect.model.ListPhoneNumbersRequest)} operation. The
     * return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
     * making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListPhoneNumbersIterable responses = client.listPhoneNumbersPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListPhoneNumbersIterable responses = client
     *             .listPhoneNumbersPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListPhoneNumbersResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListPhoneNumbersIterable responses = client.listPhoneNumbersPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listPhoneNumbers(software.amazon.awssdk.services.connect.model.ListPhoneNumbersRequest)} operation.
     * 
     *
     * @param listPhoneNumbersRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListPhoneNumbers
     * @see AWS API
     *      Documentation
     */
    default ListPhoneNumbersIterable listPhoneNumbersPaginator(ListPhoneNumbersRequest listPhoneNumbersRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return new ListPhoneNumbersIterable(this, listPhoneNumbersRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listPhoneNumbers(software.amazon.awssdk.services.connect.model.ListPhoneNumbersRequest)} operation. The
     * return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
     * making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListPhoneNumbersIterable responses = client.listPhoneNumbersPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListPhoneNumbersIterable responses = client
     *             .listPhoneNumbersPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListPhoneNumbersResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListPhoneNumbersIterable responses = client.listPhoneNumbersPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listPhoneNumbers(software.amazon.awssdk.services.connect.model.ListPhoneNumbersRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListPhoneNumbersRequest.Builder} avoiding the need
     * to create one manually via {@link ListPhoneNumbersRequest#builder()}
     * 
     *
     * @param listPhoneNumbersRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListPhoneNumbersRequest.Builder} to create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListPhoneNumbers
     * @see AWS API
     *      Documentation
     */
    default ListPhoneNumbersIterable listPhoneNumbersPaginator(Consumer listPhoneNumbersRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listPhoneNumbersPaginator(ListPhoneNumbersRequest.builder().applyMutation(listPhoneNumbersRequest).build());
    }

    /**
     * 
     * Lists phone numbers claimed to your Amazon Connect instance or traffic distribution group. If the provided
     * TargetArn is a traffic distribution group, you can call this API in both Amazon Web Services Regions
     * associated with traffic distribution group.
     * 
     * 
     * For more information about phone numbers, see Set Up Phone
     * Numbers for Your Contact Center in the Amazon Connect Administrator Guide.
     * 
     * 
     * 
     * 
     * 
     * When given an instance ARN, ListPhoneNumbersV2 returns only the phone numbers claimed to the
     * instance.
     * 
     * 
     * 
     * 
     * When given a traffic distribution group ARN ListPhoneNumbersV2 returns only the phone numbers
     * claimed to the traffic distribution group.
     * 
     * 
     * 
     * 
     *
     * @param listPhoneNumbersV2Request
     * @return Result of the ListPhoneNumbersV2 operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListPhoneNumbersV2
     * @see AWS
     *      API Documentation
     */
    default ListPhoneNumbersV2Response listPhoneNumbersV2(ListPhoneNumbersV2Request listPhoneNumbersV2Request)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AccessDeniedException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Lists phone numbers claimed to your Amazon Connect instance or traffic distribution group. If the provided
     * TargetArn is a traffic distribution group, you can call this API in both Amazon Web Services Regions
     * associated with traffic distribution group.
     * 
     * 
     * For more information about phone numbers, see Set Up Phone
     * Numbers for Your Contact Center in the Amazon Connect Administrator Guide.
     * 
     * 
     * 
     * 
     * 
     * When given an instance ARN, ListPhoneNumbersV2 returns only the phone numbers claimed to the
     * instance.
     * 
     * 
     * 
     * 
     * When given a traffic distribution group ARN ListPhoneNumbersV2 returns only the phone numbers
     * claimed to the traffic distribution group.
     * 
     * 
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListPhoneNumbersV2Request.Builder} avoiding the
     * need to create one manually via {@link ListPhoneNumbersV2Request#builder()}
     * 
     *
     * @param listPhoneNumbersV2Request
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListPhoneNumbersV2Request.Builder} to create a
     *        request.
     * @return Result of the ListPhoneNumbersV2 operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListPhoneNumbersV2
     * @see AWS
     *      API Documentation
     */
    default ListPhoneNumbersV2Response listPhoneNumbersV2(Consumer listPhoneNumbersV2Request)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AccessDeniedException, AwsServiceException, SdkClientException, ConnectException {
        return listPhoneNumbersV2(ListPhoneNumbersV2Request.builder().applyMutation(listPhoneNumbersV2Request).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listPhoneNumbersV2(software.amazon.awssdk.services.connect.model.ListPhoneNumbersV2Request)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListPhoneNumbersV2Iterable responses = client.listPhoneNumbersV2Paginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListPhoneNumbersV2Iterable responses = client
     *             .listPhoneNumbersV2Paginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListPhoneNumbersV2Response response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListPhoneNumbersV2Iterable responses = client.listPhoneNumbersV2Paginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listPhoneNumbersV2(software.amazon.awssdk.services.connect.model.ListPhoneNumbersV2Request)}
     * operation.
     * 
     *
     * @param listPhoneNumbersV2Request
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListPhoneNumbersV2
     * @see AWS
     *      API Documentation
     */
    default ListPhoneNumbersV2Iterable listPhoneNumbersV2Paginator(ListPhoneNumbersV2Request listPhoneNumbersV2Request)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AccessDeniedException, AwsServiceException, SdkClientException, ConnectException {
        return new ListPhoneNumbersV2Iterable(this, listPhoneNumbersV2Request);
    }

    /**
     * 
     * This is a variant of
     * {@link #listPhoneNumbersV2(software.amazon.awssdk.services.connect.model.ListPhoneNumbersV2Request)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListPhoneNumbersV2Iterable responses = client.listPhoneNumbersV2Paginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListPhoneNumbersV2Iterable responses = client
     *             .listPhoneNumbersV2Paginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListPhoneNumbersV2Response response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListPhoneNumbersV2Iterable responses = client.listPhoneNumbersV2Paginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listPhoneNumbersV2(software.amazon.awssdk.services.connect.model.ListPhoneNumbersV2Request)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListPhoneNumbersV2Request.Builder} avoiding the
     * need to create one manually via {@link ListPhoneNumbersV2Request#builder()}
     * 
     *
     * @param listPhoneNumbersV2Request
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListPhoneNumbersV2Request.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListPhoneNumbersV2
     * @see AWS
     *      API Documentation
     */
    default ListPhoneNumbersV2Iterable listPhoneNumbersV2Paginator(
            Consumer listPhoneNumbersV2Request) throws InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, AccessDeniedException, AwsServiceException,
            SdkClientException, ConnectException {
        return listPhoneNumbersV2Paginator(ListPhoneNumbersV2Request.builder().applyMutation(listPhoneNumbersV2Request).build());
    }

    /**
     * 
     * Lists predefined attributes for the specified Amazon Connect instance. Predefined attributes are
     * attributes in an Amazon Connect instance that can be used to route contacts to an agent or pools of agents within
     * a queue. For more information, see Create predefined
     * attributes for routing contacts to agents.
     * 
     *
     * @param listPredefinedAttributesRequest
     * @return Result of the ListPredefinedAttributes operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListPredefinedAttributes
     * @see AWS API Documentation
     */
    default ListPredefinedAttributesResponse listPredefinedAttributes(
            ListPredefinedAttributesRequest listPredefinedAttributesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Lists predefined attributes for the specified Amazon Connect instance. Predefined attributes are
     * attributes in an Amazon Connect instance that can be used to route contacts to an agent or pools of agents within
     * a queue. For more information, see Create predefined
     * attributes for routing contacts to agents.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListPredefinedAttributesRequest.Builder} avoiding
     * the need to create one manually via {@link ListPredefinedAttributesRequest#builder()}
     * 
     *
     * @param listPredefinedAttributesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListPredefinedAttributesRequest.Builder} to create a
     *        request.
     * @return Result of the ListPredefinedAttributes operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListPredefinedAttributes
     * @see AWS API Documentation
     */
    default ListPredefinedAttributesResponse listPredefinedAttributes(
            Consumer listPredefinedAttributesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listPredefinedAttributes(ListPredefinedAttributesRequest.builder().applyMutation(listPredefinedAttributesRequest)
                .build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listPredefinedAttributes(software.amazon.awssdk.services.connect.model.ListPredefinedAttributesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListPredefinedAttributesIterable responses = client.listPredefinedAttributesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListPredefinedAttributesIterable responses = client
     *             .listPredefinedAttributesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListPredefinedAttributesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListPredefinedAttributesIterable responses = client.listPredefinedAttributesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listPredefinedAttributes(software.amazon.awssdk.services.connect.model.ListPredefinedAttributesRequest)}
     * operation.
     * 
     *
     * @param listPredefinedAttributesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListPredefinedAttributes
     * @see AWS API Documentation
     */
    default ListPredefinedAttributesIterable listPredefinedAttributesPaginator(
            ListPredefinedAttributesRequest listPredefinedAttributesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return new ListPredefinedAttributesIterable(this, listPredefinedAttributesRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listPredefinedAttributes(software.amazon.awssdk.services.connect.model.ListPredefinedAttributesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListPredefinedAttributesIterable responses = client.listPredefinedAttributesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListPredefinedAttributesIterable responses = client
     *             .listPredefinedAttributesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListPredefinedAttributesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListPredefinedAttributesIterable responses = client.listPredefinedAttributesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listPredefinedAttributes(software.amazon.awssdk.services.connect.model.ListPredefinedAttributesRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListPredefinedAttributesRequest.Builder} avoiding
     * the need to create one manually via {@link ListPredefinedAttributesRequest#builder()}
     * 
     *
     * @param listPredefinedAttributesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListPredefinedAttributesRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListPredefinedAttributes
     * @see AWS API Documentation
     */
    default ListPredefinedAttributesIterable listPredefinedAttributesPaginator(
            Consumer listPredefinedAttributesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listPredefinedAttributesPaginator(ListPredefinedAttributesRequest.builder()
                .applyMutation(listPredefinedAttributesRequest).build());
    }

    /**
     * 
     * Provides information about the prompts for the specified Amazon Connect instance.
     * 
     *
     * @param listPromptsRequest
     * @return Result of the ListPrompts operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListPrompts
     * @see AWS API
     *      Documentation
     */
    default ListPromptsResponse listPrompts(ListPromptsRequest listPromptsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Provides information about the prompts for the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListPromptsRequest.Builder} avoiding the need to
     * create one manually via {@link ListPromptsRequest#builder()}
     * 
     *
     * @param listPromptsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListPromptsRequest.Builder} to create a request.
     * @return Result of the ListPrompts operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListPrompts
     * @see AWS API
     *      Documentation
     */
    default ListPromptsResponse listPrompts(Consumer listPromptsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listPrompts(ListPromptsRequest.builder().applyMutation(listPromptsRequest).build());
    }

    /**
     * 
     * This is a variant of {@link #listPrompts(software.amazon.awssdk.services.connect.model.ListPromptsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListPromptsIterable responses = client.listPromptsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListPromptsIterable responses = client.listPromptsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListPromptsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListPromptsIterable responses = client.listPromptsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listPrompts(software.amazon.awssdk.services.connect.model.ListPromptsRequest)} operation.
     * 
     *
     * @param listPromptsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListPrompts
     * @see AWS API
     *      Documentation
     */
    default ListPromptsIterable listPromptsPaginator(ListPromptsRequest listPromptsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return new ListPromptsIterable(this, listPromptsRequest);
    }

    /**
     * 
     * This is a variant of {@link #listPrompts(software.amazon.awssdk.services.connect.model.ListPromptsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListPromptsIterable responses = client.listPromptsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListPromptsIterable responses = client.listPromptsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListPromptsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListPromptsIterable responses = client.listPromptsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listPrompts(software.amazon.awssdk.services.connect.model.ListPromptsRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListPromptsRequest.Builder} avoiding the need to
     * create one manually via {@link ListPromptsRequest#builder()}
     * 
     *
     * @param listPromptsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListPromptsRequest.Builder} to create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListPrompts
     * @see AWS API
     *      Documentation
     */
    default ListPromptsIterable listPromptsPaginator(Consumer listPromptsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listPromptsPaginator(ListPromptsRequest.builder().applyMutation(listPromptsRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Lists the quick connects associated with a queue.
     * 
     *
     * @param listQueueQuickConnectsRequest
     * @return Result of the ListQueueQuickConnects operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListQueueQuickConnects
     * @see AWS API Documentation
     */
    default ListQueueQuickConnectsResponse listQueueQuickConnects(ListQueueQuickConnectsRequest listQueueQuickConnectsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Lists the quick connects associated with a queue.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListQueueQuickConnectsRequest.Builder} avoiding the
     * need to create one manually via {@link ListQueueQuickConnectsRequest#builder()}
     * 
     *
     * @param listQueueQuickConnectsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListQueueQuickConnectsRequest.Builder} to create a
     *        request.
     * @return Result of the ListQueueQuickConnects operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListQueueQuickConnects
     * @see AWS API Documentation
     */
    default ListQueueQuickConnectsResponse listQueueQuickConnects(
            Consumer listQueueQuickConnectsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listQueueQuickConnects(ListQueueQuickConnectsRequest.builder().applyMutation(listQueueQuickConnectsRequest)
                .build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listQueueQuickConnects(software.amazon.awssdk.services.connect.model.ListQueueQuickConnectsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListQueueQuickConnectsIterable responses = client.listQueueQuickConnectsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListQueueQuickConnectsIterable responses = client
     *             .listQueueQuickConnectsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListQueueQuickConnectsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListQueueQuickConnectsIterable responses = client.listQueueQuickConnectsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listQueueQuickConnects(software.amazon.awssdk.services.connect.model.ListQueueQuickConnectsRequest)}
     * operation.
     * 
     *
     * @param listQueueQuickConnectsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListQueueQuickConnects
     * @see AWS API Documentation
     */
    default ListQueueQuickConnectsIterable listQueueQuickConnectsPaginator(
            ListQueueQuickConnectsRequest listQueueQuickConnectsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return new ListQueueQuickConnectsIterable(this, listQueueQuickConnectsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listQueueQuickConnects(software.amazon.awssdk.services.connect.model.ListQueueQuickConnectsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListQueueQuickConnectsIterable responses = client.listQueueQuickConnectsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListQueueQuickConnectsIterable responses = client
     *             .listQueueQuickConnectsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListQueueQuickConnectsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListQueueQuickConnectsIterable responses = client.listQueueQuickConnectsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listQueueQuickConnects(software.amazon.awssdk.services.connect.model.ListQueueQuickConnectsRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListQueueQuickConnectsRequest.Builder} avoiding the
     * need to create one manually via {@link ListQueueQuickConnectsRequest#builder()}
     * 
     *
     * @param listQueueQuickConnectsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListQueueQuickConnectsRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListQueueQuickConnects
     * @see AWS API Documentation
     */
    default ListQueueQuickConnectsIterable listQueueQuickConnectsPaginator(
            Consumer listQueueQuickConnectsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listQueueQuickConnectsPaginator(ListQueueQuickConnectsRequest.builder()
                .applyMutation(listQueueQuickConnectsRequest).build());
    }

    /**
     * 
     * Provides information about the queues for the specified Amazon Connect instance.
     * 
     * 
     * If you do not specify a QueueTypes parameter, both standard and agent queues are returned. This
     * might cause an unexpected truncation of results if you have more than 1000 agents and you limit the number of
     * results of the API call in code.
     * 
     * 
     * For more information about queues, see Queues:
     * Standard and Agent in the Amazon Connect Administrator Guide.
     * 
     *
     * @param listQueuesRequest
     * @return Result of the ListQueues operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListQueues
     * @see AWS API
     *      Documentation
     */
    default ListQueuesResponse listQueues(ListQueuesRequest listQueuesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Provides information about the queues for the specified Amazon Connect instance.
     * 
     * 
     * If you do not specify a QueueTypes parameter, both standard and agent queues are returned. This
     * might cause an unexpected truncation of results if you have more than 1000 agents and you limit the number of
     * results of the API call in code.
     * 
     * 
     * For more information about queues, see Queues:
     * Standard and Agent in the Amazon Connect Administrator Guide.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListQueuesRequest.Builder} avoiding the need to
     * create one manually via {@link ListQueuesRequest#builder()}
     * 
     *
     * @param listQueuesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListQueuesRequest.Builder} to create a request.
     * @return Result of the ListQueues operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListQueues
     * @see AWS API
     *      Documentation
     */
    default ListQueuesResponse listQueues(Consumer listQueuesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listQueues(ListQueuesRequest.builder().applyMutation(listQueuesRequest).build());
    }

    /**
     * 
     * This is a variant of {@link #listQueues(software.amazon.awssdk.services.connect.model.ListQueuesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListQueuesIterable responses = client.listQueuesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListQueuesIterable responses = client.listQueuesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListQueuesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListQueuesIterable responses = client.listQueuesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listQueues(software.amazon.awssdk.services.connect.model.ListQueuesRequest)} operation.
     * 
     *
     * @param listQueuesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListQueues
     * @see AWS API
     *      Documentation
     */
    default ListQueuesIterable listQueuesPaginator(ListQueuesRequest listQueuesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return new ListQueuesIterable(this, listQueuesRequest);
    }

    /**
     * 
     * This is a variant of {@link #listQueues(software.amazon.awssdk.services.connect.model.ListQueuesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListQueuesIterable responses = client.listQueuesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListQueuesIterable responses = client.listQueuesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListQueuesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListQueuesIterable responses = client.listQueuesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listQueues(software.amazon.awssdk.services.connect.model.ListQueuesRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListQueuesRequest.Builder} avoiding the need to
     * create one manually via {@link ListQueuesRequest#builder()}
     * 
     *
     * @param listQueuesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListQueuesRequest.Builder} to create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListQueues
     * @see AWS API
     *      Documentation
     */
    default ListQueuesIterable listQueuesPaginator(Consumer listQueuesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listQueuesPaginator(ListQueuesRequest.builder().applyMutation(listQueuesRequest).build());
    }

    /**
     * 
     * Provides information about the quick connects for the specified Amazon Connect instance.
     * 
     *
     * @param listQuickConnectsRequest
     * @return Result of the ListQuickConnects operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListQuickConnects
     * @see AWS API
     *      Documentation
     */
    default ListQuickConnectsResponse listQuickConnects(ListQuickConnectsRequest listQuickConnectsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Provides information about the quick connects for the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListQuickConnectsRequest.Builder} avoiding the need
     * to create one manually via {@link ListQuickConnectsRequest#builder()}
     * 
     *
     * @param listQuickConnectsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListQuickConnectsRequest.Builder} to create a
     *        request.
     * @return Result of the ListQuickConnects operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListQuickConnects
     * @see AWS API
     *      Documentation
     */
    default ListQuickConnectsResponse listQuickConnects(Consumer listQuickConnectsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listQuickConnects(ListQuickConnectsRequest.builder().applyMutation(listQuickConnectsRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listQuickConnects(software.amazon.awssdk.services.connect.model.ListQuickConnectsRequest)} operation. The
     * return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
     * making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListQuickConnectsIterable responses = client.listQuickConnectsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListQuickConnectsIterable responses = client
     *             .listQuickConnectsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListQuickConnectsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListQuickConnectsIterable responses = client.listQuickConnectsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listQuickConnects(software.amazon.awssdk.services.connect.model.ListQuickConnectsRequest)} operation.
     * 
     *
     * @param listQuickConnectsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListQuickConnects
     * @see AWS API
     *      Documentation
     */
    default ListQuickConnectsIterable listQuickConnectsPaginator(ListQuickConnectsRequest listQuickConnectsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return new ListQuickConnectsIterable(this, listQuickConnectsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listQuickConnects(software.amazon.awssdk.services.connect.model.ListQuickConnectsRequest)} operation. The
     * return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
     * making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListQuickConnectsIterable responses = client.listQuickConnectsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListQuickConnectsIterable responses = client
     *             .listQuickConnectsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListQuickConnectsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListQuickConnectsIterable responses = client.listQuickConnectsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listQuickConnects(software.amazon.awssdk.services.connect.model.ListQuickConnectsRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListQuickConnectsRequest.Builder} avoiding the need
     * to create one manually via {@link ListQuickConnectsRequest#builder()}
     * 
     *
     * @param listQuickConnectsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListQuickConnectsRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListQuickConnects
     * @see AWS API
     *      Documentation
     */
    default ListQuickConnectsIterable listQuickConnectsPaginator(
            Consumer listQuickConnectsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listQuickConnectsPaginator(ListQuickConnectsRequest.builder().applyMutation(listQuickConnectsRequest).build());
    }

    /**
     * 
     * Provides a list of analysis segments for a real-time analysis session.
     * 
     *
     * @param listRealtimeContactAnalysisSegmentsV2Request
     * @return Result of the ListRealtimeContactAnalysisSegmentsV2 operation returned by the service.
     * @throws OutputTypeNotFoundException
     *         Thrown for analyzed content when requested OutputType was not enabled for a given contact. For example,
     *         if an OutputType.Raw was requested for a contact that had `RedactedOnly` Redaction policy set in Contact
     *         flow.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListRealtimeContactAnalysisSegmentsV2
     * @see AWS API Documentation
     */
    default ListRealtimeContactAnalysisSegmentsV2Response listRealtimeContactAnalysisSegmentsV2(
            ListRealtimeContactAnalysisSegmentsV2Request listRealtimeContactAnalysisSegmentsV2Request)
            throws OutputTypeNotFoundException, AccessDeniedException, ResourceNotFoundException, InvalidRequestException,
            InternalServiceException, ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Provides a list of analysis segments for a real-time analysis session.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the
     * {@link ListRealtimeContactAnalysisSegmentsV2Request.Builder} avoiding the need to create one manually via
     * {@link ListRealtimeContactAnalysisSegmentsV2Request#builder()}
     * 
     *
     * @param listRealtimeContactAnalysisSegmentsV2Request
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListRealtimeContactAnalysisSegmentsV2Request.Builder}
     *        to create a request.
     * @return Result of the ListRealtimeContactAnalysisSegmentsV2 operation returned by the service.
     * @throws OutputTypeNotFoundException
     *         Thrown for analyzed content when requested OutputType was not enabled for a given contact. For example,
     *         if an OutputType.Raw was requested for a contact that had `RedactedOnly` Redaction policy set in Contact
     *         flow.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListRealtimeContactAnalysisSegmentsV2
     * @see AWS API Documentation
     */
    default ListRealtimeContactAnalysisSegmentsV2Response listRealtimeContactAnalysisSegmentsV2(
            Consumer listRealtimeContactAnalysisSegmentsV2Request)
            throws OutputTypeNotFoundException, AccessDeniedException, ResourceNotFoundException, InvalidRequestException,
            InternalServiceException, ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return listRealtimeContactAnalysisSegmentsV2(ListRealtimeContactAnalysisSegmentsV2Request.builder()
                .applyMutation(listRealtimeContactAnalysisSegmentsV2Request).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listRealtimeContactAnalysisSegmentsV2(software.amazon.awssdk.services.connect.model.ListRealtimeContactAnalysisSegmentsV2Request)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListRealtimeContactAnalysisSegmentsV2Iterable responses = client.listRealtimeContactAnalysisSegmentsV2Paginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListRealtimeContactAnalysisSegmentsV2Iterable responses = client
     *             .listRealtimeContactAnalysisSegmentsV2Paginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListRealtimeContactAnalysisSegmentsV2Response response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListRealtimeContactAnalysisSegmentsV2Iterable responses = client.listRealtimeContactAnalysisSegmentsV2Paginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listRealtimeContactAnalysisSegmentsV2(software.amazon.awssdk.services.connect.model.ListRealtimeContactAnalysisSegmentsV2Request)}
     * operation.
     * 
     *
     * @param listRealtimeContactAnalysisSegmentsV2Request
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws OutputTypeNotFoundException
     *         Thrown for analyzed content when requested OutputType was not enabled for a given contact. For example,
     *         if an OutputType.Raw was requested for a contact that had `RedactedOnly` Redaction policy set in Contact
     *         flow.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListRealtimeContactAnalysisSegmentsV2
     * @see AWS API Documentation
     */
    default ListRealtimeContactAnalysisSegmentsV2Iterable listRealtimeContactAnalysisSegmentsV2Paginator(
            ListRealtimeContactAnalysisSegmentsV2Request listRealtimeContactAnalysisSegmentsV2Request)
            throws OutputTypeNotFoundException, AccessDeniedException, ResourceNotFoundException, InvalidRequestException,
            InternalServiceException, ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return new ListRealtimeContactAnalysisSegmentsV2Iterable(this, listRealtimeContactAnalysisSegmentsV2Request);
    }

    /**
     * 
     * This is a variant of
     * {@link #listRealtimeContactAnalysisSegmentsV2(software.amazon.awssdk.services.connect.model.ListRealtimeContactAnalysisSegmentsV2Request)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListRealtimeContactAnalysisSegmentsV2Iterable responses = client.listRealtimeContactAnalysisSegmentsV2Paginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListRealtimeContactAnalysisSegmentsV2Iterable responses = client
     *             .listRealtimeContactAnalysisSegmentsV2Paginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListRealtimeContactAnalysisSegmentsV2Response response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListRealtimeContactAnalysisSegmentsV2Iterable responses = client.listRealtimeContactAnalysisSegmentsV2Paginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listRealtimeContactAnalysisSegmentsV2(software.amazon.awssdk.services.connect.model.ListRealtimeContactAnalysisSegmentsV2Request)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the
     * {@link ListRealtimeContactAnalysisSegmentsV2Request.Builder} avoiding the need to create one manually via
     * {@link ListRealtimeContactAnalysisSegmentsV2Request#builder()}
     * 
     *
     * @param listRealtimeContactAnalysisSegmentsV2Request
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListRealtimeContactAnalysisSegmentsV2Request.Builder}
     *        to create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws OutputTypeNotFoundException
     *         Thrown for analyzed content when requested OutputType was not enabled for a given contact. For example,
     *         if an OutputType.Raw was requested for a contact that had `RedactedOnly` Redaction policy set in Contact
     *         flow.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListRealtimeContactAnalysisSegmentsV2
     * @see AWS API Documentation
     */
    default ListRealtimeContactAnalysisSegmentsV2Iterable listRealtimeContactAnalysisSegmentsV2Paginator(
            Consumer listRealtimeContactAnalysisSegmentsV2Request)
            throws OutputTypeNotFoundException, AccessDeniedException, ResourceNotFoundException, InvalidRequestException,
            InternalServiceException, ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return listRealtimeContactAnalysisSegmentsV2Paginator(ListRealtimeContactAnalysisSegmentsV2Request.builder()
                .applyMutation(listRealtimeContactAnalysisSegmentsV2Request).build());
    }

    /**
     * 
     * Lists the queues associated with a routing profile.
     * 
     *
     * @param listRoutingProfileQueuesRequest
     * @return Result of the ListRoutingProfileQueues operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListRoutingProfileQueues
     * @see AWS API Documentation
     */
    default ListRoutingProfileQueuesResponse listRoutingProfileQueues(
            ListRoutingProfileQueuesRequest listRoutingProfileQueuesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Lists the queues associated with a routing profile.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListRoutingProfileQueuesRequest.Builder} avoiding
     * the need to create one manually via {@link ListRoutingProfileQueuesRequest#builder()}
     * 
     *
     * @param listRoutingProfileQueuesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListRoutingProfileQueuesRequest.Builder} to create a
     *        request.
     * @return Result of the ListRoutingProfileQueues operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListRoutingProfileQueues
     * @see AWS API Documentation
     */
    default ListRoutingProfileQueuesResponse listRoutingProfileQueues(
            Consumer listRoutingProfileQueuesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listRoutingProfileQueues(ListRoutingProfileQueuesRequest.builder().applyMutation(listRoutingProfileQueuesRequest)
                .build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listRoutingProfileQueues(software.amazon.awssdk.services.connect.model.ListRoutingProfileQueuesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListRoutingProfileQueuesIterable responses = client.listRoutingProfileQueuesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListRoutingProfileQueuesIterable responses = client
     *             .listRoutingProfileQueuesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListRoutingProfileQueuesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListRoutingProfileQueuesIterable responses = client.listRoutingProfileQueuesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listRoutingProfileQueues(software.amazon.awssdk.services.connect.model.ListRoutingProfileQueuesRequest)}
     * operation.
     * 
     *
     * @param listRoutingProfileQueuesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListRoutingProfileQueues
     * @see AWS API Documentation
     */
    default ListRoutingProfileQueuesIterable listRoutingProfileQueuesPaginator(
            ListRoutingProfileQueuesRequest listRoutingProfileQueuesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return new ListRoutingProfileQueuesIterable(this, listRoutingProfileQueuesRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listRoutingProfileQueues(software.amazon.awssdk.services.connect.model.ListRoutingProfileQueuesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListRoutingProfileQueuesIterable responses = client.listRoutingProfileQueuesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListRoutingProfileQueuesIterable responses = client
     *             .listRoutingProfileQueuesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListRoutingProfileQueuesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListRoutingProfileQueuesIterable responses = client.listRoutingProfileQueuesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listRoutingProfileQueues(software.amazon.awssdk.services.connect.model.ListRoutingProfileQueuesRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListRoutingProfileQueuesRequest.Builder} avoiding
     * the need to create one manually via {@link ListRoutingProfileQueuesRequest#builder()}
     * 
     *
     * @param listRoutingProfileQueuesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListRoutingProfileQueuesRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListRoutingProfileQueues
     * @see AWS API Documentation
     */
    default ListRoutingProfileQueuesIterable listRoutingProfileQueuesPaginator(
            Consumer listRoutingProfileQueuesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listRoutingProfileQueuesPaginator(ListRoutingProfileQueuesRequest.builder()
                .applyMutation(listRoutingProfileQueuesRequest).build());
    }

    /**
     * 
     * Provides summary information about the routing profiles for the specified Amazon Connect instance.
     * 
     * 
     * For more information about routing profiles, see Routing Profiles and Create a Routing Profile
     * in the Amazon Connect Administrator Guide.
     * 
     *
     * @param listRoutingProfilesRequest
     * @return Result of the ListRoutingProfiles operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListRoutingProfiles
     * @see AWS
     *      API Documentation
     */
    default ListRoutingProfilesResponse listRoutingProfiles(ListRoutingProfilesRequest listRoutingProfilesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Provides summary information about the routing profiles for the specified Amazon Connect instance.
     * 
     * 
     * For more information about routing profiles, see Routing Profiles and Create a Routing Profile
     * in the Amazon Connect Administrator Guide.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListRoutingProfilesRequest.Builder} avoiding the
     * need to create one manually via {@link ListRoutingProfilesRequest#builder()}
     * 
     *
     * @param listRoutingProfilesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListRoutingProfilesRequest.Builder} to create a
     *        request.
     * @return Result of the ListRoutingProfiles operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListRoutingProfiles
     * @see AWS
     *      API Documentation
     */
    default ListRoutingProfilesResponse listRoutingProfiles(
            Consumer listRoutingProfilesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listRoutingProfiles(ListRoutingProfilesRequest.builder().applyMutation(listRoutingProfilesRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listRoutingProfiles(software.amazon.awssdk.services.connect.model.ListRoutingProfilesRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListRoutingProfilesIterable responses = client.listRoutingProfilesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListRoutingProfilesIterable responses = client
     *             .listRoutingProfilesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListRoutingProfilesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListRoutingProfilesIterable responses = client.listRoutingProfilesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listRoutingProfiles(software.amazon.awssdk.services.connect.model.ListRoutingProfilesRequest)}
     * operation.
     * 
     *
     * @param listRoutingProfilesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListRoutingProfiles
     * @see AWS
     *      API Documentation
     */
    default ListRoutingProfilesIterable listRoutingProfilesPaginator(ListRoutingProfilesRequest listRoutingProfilesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return new ListRoutingProfilesIterable(this, listRoutingProfilesRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listRoutingProfiles(software.amazon.awssdk.services.connect.model.ListRoutingProfilesRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListRoutingProfilesIterable responses = client.listRoutingProfilesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListRoutingProfilesIterable responses = client
     *             .listRoutingProfilesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListRoutingProfilesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListRoutingProfilesIterable responses = client.listRoutingProfilesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listRoutingProfiles(software.amazon.awssdk.services.connect.model.ListRoutingProfilesRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListRoutingProfilesRequest.Builder} avoiding the
     * need to create one manually via {@link ListRoutingProfilesRequest#builder()}
     * 
     *
     * @param listRoutingProfilesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListRoutingProfilesRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListRoutingProfiles
     * @see AWS
     *      API Documentation
     */
    default ListRoutingProfilesIterable listRoutingProfilesPaginator(
            Consumer listRoutingProfilesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listRoutingProfilesPaginator(ListRoutingProfilesRequest.builder().applyMutation(listRoutingProfilesRequest)
                .build());
    }

    /**
     * 
     * List all rules for the specified Amazon Connect instance.
     * 
     *
     * @param listRulesRequest
     * @return Result of the ListRules operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListRules
     * @see AWS API
     *      Documentation
     */
    default ListRulesResponse listRules(ListRulesRequest listRulesRequest) throws InvalidRequestException,
            InternalServiceException, ThrottlingException, AccessDeniedException, ResourceNotFoundException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * List all rules for the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListRulesRequest.Builder} avoiding the need to
     * create one manually via {@link ListRulesRequest#builder()}
     * 
     *
     * @param listRulesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListRulesRequest.Builder} to create a request.
     * @return Result of the ListRules operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListRules
     * @see AWS API
     *      Documentation
     */
    default ListRulesResponse listRules(Consumer listRulesRequest) throws InvalidRequestException,
            InternalServiceException, ThrottlingException, AccessDeniedException, ResourceNotFoundException, AwsServiceException,
            SdkClientException, ConnectException {
        return listRules(ListRulesRequest.builder().applyMutation(listRulesRequest).build());
    }

    /**
     * 
     * This is a variant of {@link #listRules(software.amazon.awssdk.services.connect.model.ListRulesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListRulesIterable responses = client.listRulesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListRulesIterable responses = client.listRulesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListRulesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListRulesIterable responses = client.listRulesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listRules(software.amazon.awssdk.services.connect.model.ListRulesRequest)} operation.
     * 
     *
     * @param listRulesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListRules
     * @see AWS API
     *      Documentation
     */
    default ListRulesIterable listRulesPaginator(ListRulesRequest listRulesRequest) throws InvalidRequestException,
            InternalServiceException, ThrottlingException, AccessDeniedException, ResourceNotFoundException, AwsServiceException,
            SdkClientException, ConnectException {
        return new ListRulesIterable(this, listRulesRequest);
    }

    /**
     * 
     * This is a variant of {@link #listRules(software.amazon.awssdk.services.connect.model.ListRulesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListRulesIterable responses = client.listRulesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListRulesIterable responses = client.listRulesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListRulesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListRulesIterable responses = client.listRulesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listRules(software.amazon.awssdk.services.connect.model.ListRulesRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListRulesRequest.Builder} avoiding the need to
     * create one manually via {@link ListRulesRequest#builder()}
     * 
     *
     * @param listRulesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListRulesRequest.Builder} to create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListRules
     * @see AWS API
     *      Documentation
     */
    default ListRulesIterable listRulesPaginator(Consumer listRulesRequest)
            throws InvalidRequestException, InternalServiceException, ThrottlingException, AccessDeniedException,
            ResourceNotFoundException, AwsServiceException, SdkClientException, ConnectException {
        return listRulesPaginator(ListRulesRequest.builder().applyMutation(listRulesRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Returns a paginated list of all security keys associated with the instance.
     * 
     *
     * @param listSecurityKeysRequest
     * @return Result of the ListSecurityKeys operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListSecurityKeys
     * @see AWS API
     *      Documentation
     */
    default ListSecurityKeysResponse listSecurityKeys(ListSecurityKeysRequest listSecurityKeysRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Returns a paginated list of all security keys associated with the instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListSecurityKeysRequest.Builder} avoiding the need
     * to create one manually via {@link ListSecurityKeysRequest#builder()}
     * 
     *
     * @param listSecurityKeysRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListSecurityKeysRequest.Builder} to create a request.
     * @return Result of the ListSecurityKeys operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListSecurityKeys
     * @see AWS API
     *      Documentation
     */
    default ListSecurityKeysResponse listSecurityKeys(Consumer listSecurityKeysRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return listSecurityKeys(ListSecurityKeysRequest.builder().applyMutation(listSecurityKeysRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listSecurityKeys(software.amazon.awssdk.services.connect.model.ListSecurityKeysRequest)} operation. The
     * return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
     * making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListSecurityKeysIterable responses = client.listSecurityKeysPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListSecurityKeysIterable responses = client
     *             .listSecurityKeysPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListSecurityKeysResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListSecurityKeysIterable responses = client.listSecurityKeysPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listSecurityKeys(software.amazon.awssdk.services.connect.model.ListSecurityKeysRequest)} operation.
     * 
     *
     * @param listSecurityKeysRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListSecurityKeys
     * @see AWS API
     *      Documentation
     */
    default ListSecurityKeysIterable listSecurityKeysPaginator(ListSecurityKeysRequest listSecurityKeysRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return new ListSecurityKeysIterable(this, listSecurityKeysRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listSecurityKeys(software.amazon.awssdk.services.connect.model.ListSecurityKeysRequest)} operation. The
     * return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
     * making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListSecurityKeysIterable responses = client.listSecurityKeysPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListSecurityKeysIterable responses = client
     *             .listSecurityKeysPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListSecurityKeysResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListSecurityKeysIterable responses = client.listSecurityKeysPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listSecurityKeys(software.amazon.awssdk.services.connect.model.ListSecurityKeysRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListSecurityKeysRequest.Builder} avoiding the need
     * to create one manually via {@link ListSecurityKeysRequest#builder()}
     * 
     *
     * @param listSecurityKeysRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListSecurityKeysRequest.Builder} to create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListSecurityKeys
     * @see AWS API
     *      Documentation
     */
    default ListSecurityKeysIterable listSecurityKeysPaginator(Consumer listSecurityKeysRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return listSecurityKeysPaginator(ListSecurityKeysRequest.builder().applyMutation(listSecurityKeysRequest).build());
    }

    /**
     * 
     * Returns a list of third-party applications in a specific security profile.
     * 
     *
     * @param listSecurityProfileApplicationsRequest
     * @return Result of the ListSecurityProfileApplications operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListSecurityProfileApplications
     * @see AWS API Documentation
     */
    default ListSecurityProfileApplicationsResponse listSecurityProfileApplications(
            ListSecurityProfileApplicationsRequest listSecurityProfileApplicationsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Returns a list of third-party applications in a specific security profile.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListSecurityProfileApplicationsRequest.Builder}
     * avoiding the need to create one manually via {@link ListSecurityProfileApplicationsRequest#builder()}
     * 
     *
     * @param listSecurityProfileApplicationsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListSecurityProfileApplicationsRequest.Builder} to
     *        create a request.
     * @return Result of the ListSecurityProfileApplications operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListSecurityProfileApplications
     * @see AWS API Documentation
     */
    default ListSecurityProfileApplicationsResponse listSecurityProfileApplications(
            Consumer listSecurityProfileApplicationsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listSecurityProfileApplications(ListSecurityProfileApplicationsRequest.builder()
                .applyMutation(listSecurityProfileApplicationsRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listSecurityProfileApplications(software.amazon.awssdk.services.connect.model.ListSecurityProfileApplicationsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListSecurityProfileApplicationsIterable responses = client.listSecurityProfileApplicationsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListSecurityProfileApplicationsIterable responses = client
     *             .listSecurityProfileApplicationsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListSecurityProfileApplicationsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListSecurityProfileApplicationsIterable responses = client.listSecurityProfileApplicationsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listSecurityProfileApplications(software.amazon.awssdk.services.connect.model.ListSecurityProfileApplicationsRequest)}
     * operation.
     * 
     *
     * @param listSecurityProfileApplicationsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListSecurityProfileApplications
     * @see AWS API Documentation
     */
    default ListSecurityProfileApplicationsIterable listSecurityProfileApplicationsPaginator(
            ListSecurityProfileApplicationsRequest listSecurityProfileApplicationsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return new ListSecurityProfileApplicationsIterable(this, listSecurityProfileApplicationsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listSecurityProfileApplications(software.amazon.awssdk.services.connect.model.ListSecurityProfileApplicationsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListSecurityProfileApplicationsIterable responses = client.listSecurityProfileApplicationsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListSecurityProfileApplicationsIterable responses = client
     *             .listSecurityProfileApplicationsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListSecurityProfileApplicationsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListSecurityProfileApplicationsIterable responses = client.listSecurityProfileApplicationsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listSecurityProfileApplications(software.amazon.awssdk.services.connect.model.ListSecurityProfileApplicationsRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListSecurityProfileApplicationsRequest.Builder}
     * avoiding the need to create one manually via {@link ListSecurityProfileApplicationsRequest#builder()}
     * 
     *
     * @param listSecurityProfileApplicationsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListSecurityProfileApplicationsRequest.Builder} to
     *        create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListSecurityProfileApplications
     * @see AWS API Documentation
     */
    default ListSecurityProfileApplicationsIterable listSecurityProfileApplicationsPaginator(
            Consumer listSecurityProfileApplicationsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listSecurityProfileApplicationsPaginator(ListSecurityProfileApplicationsRequest.builder()
                .applyMutation(listSecurityProfileApplicationsRequest).build());
    }

    /**
     * 
     * Lists the permissions granted to a security profile.
     * 
     * 
     * For information about security profiles, see Security Profiles
     * in the Amazon Connect Administrator Guide. For a mapping of the API name and user interface name of the
     * security profile permissions, see List of security profile
     * permissions.
     * 
     *
     * @param listSecurityProfilePermissionsRequest
     * @return Result of the ListSecurityProfilePermissions operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListSecurityProfilePermissions
     * @see AWS API Documentation
     */
    default ListSecurityProfilePermissionsResponse listSecurityProfilePermissions(
            ListSecurityProfilePermissionsRequest listSecurityProfilePermissionsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Lists the permissions granted to a security profile.
     * 
     * 
     * For information about security profiles, see Security Profiles
     * in the Amazon Connect Administrator Guide. For a mapping of the API name and user interface name of the
     * security profile permissions, see List of security profile
     * permissions.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListSecurityProfilePermissionsRequest.Builder}
     * avoiding the need to create one manually via {@link ListSecurityProfilePermissionsRequest#builder()}
     * 
     *
     * @param listSecurityProfilePermissionsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListSecurityProfilePermissionsRequest.Builder} to
     *        create a request.
     * @return Result of the ListSecurityProfilePermissions operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListSecurityProfilePermissions
     * @see AWS API Documentation
     */
    default ListSecurityProfilePermissionsResponse listSecurityProfilePermissions(
            Consumer listSecurityProfilePermissionsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listSecurityProfilePermissions(ListSecurityProfilePermissionsRequest.builder()
                .applyMutation(listSecurityProfilePermissionsRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listSecurityProfilePermissions(software.amazon.awssdk.services.connect.model.ListSecurityProfilePermissionsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListSecurityProfilePermissionsIterable responses = client.listSecurityProfilePermissionsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListSecurityProfilePermissionsIterable responses = client
     *             .listSecurityProfilePermissionsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListSecurityProfilePermissionsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListSecurityProfilePermissionsIterable responses = client.listSecurityProfilePermissionsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listSecurityProfilePermissions(software.amazon.awssdk.services.connect.model.ListSecurityProfilePermissionsRequest)}
     * operation.
     * 
     *
     * @param listSecurityProfilePermissionsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListSecurityProfilePermissions
     * @see AWS API Documentation
     */
    default ListSecurityProfilePermissionsIterable listSecurityProfilePermissionsPaginator(
            ListSecurityProfilePermissionsRequest listSecurityProfilePermissionsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return new ListSecurityProfilePermissionsIterable(this, listSecurityProfilePermissionsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listSecurityProfilePermissions(software.amazon.awssdk.services.connect.model.ListSecurityProfilePermissionsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListSecurityProfilePermissionsIterable responses = client.listSecurityProfilePermissionsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListSecurityProfilePermissionsIterable responses = client
     *             .listSecurityProfilePermissionsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListSecurityProfilePermissionsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListSecurityProfilePermissionsIterable responses = client.listSecurityProfilePermissionsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listSecurityProfilePermissions(software.amazon.awssdk.services.connect.model.ListSecurityProfilePermissionsRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListSecurityProfilePermissionsRequest.Builder}
     * avoiding the need to create one manually via {@link ListSecurityProfilePermissionsRequest#builder()}
     * 
     *
     * @param listSecurityProfilePermissionsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListSecurityProfilePermissionsRequest.Builder} to
     *        create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListSecurityProfilePermissions
     * @see AWS API Documentation
     */
    default ListSecurityProfilePermissionsIterable listSecurityProfilePermissionsPaginator(
            Consumer listSecurityProfilePermissionsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listSecurityProfilePermissionsPaginator(ListSecurityProfilePermissionsRequest.builder()
                .applyMutation(listSecurityProfilePermissionsRequest).build());
    }

    /**
     * 
     * Provides summary information about the security profiles for the specified Amazon Connect instance.
     * 
     * 
     * For more information about security profiles, see Security Profiles
     * in the Amazon Connect Administrator Guide. For a mapping of the API name and user interface name of the
     * security profile permissions, see List of security profile
     * permissions.
     * 
     *
     * @param listSecurityProfilesRequest
     * @return Result of the ListSecurityProfiles operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListSecurityProfiles
     * @see AWS
     *      API Documentation
     */
    default ListSecurityProfilesResponse listSecurityProfiles(ListSecurityProfilesRequest listSecurityProfilesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Provides summary information about the security profiles for the specified Amazon Connect instance.
     * 
     * 
     * For more information about security profiles, see Security Profiles
     * in the Amazon Connect Administrator Guide. For a mapping of the API name and user interface name of the
     * security profile permissions, see List of security profile
     * permissions.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListSecurityProfilesRequest.Builder} avoiding the
     * need to create one manually via {@link ListSecurityProfilesRequest#builder()}
     * 
     *
     * @param listSecurityProfilesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListSecurityProfilesRequest.Builder} to create a
     *        request.
     * @return Result of the ListSecurityProfiles operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListSecurityProfiles
     * @see AWS
     *      API Documentation
     */
    default ListSecurityProfilesResponse listSecurityProfiles(
            Consumer listSecurityProfilesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listSecurityProfiles(ListSecurityProfilesRequest.builder().applyMutation(listSecurityProfilesRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listSecurityProfiles(software.amazon.awssdk.services.connect.model.ListSecurityProfilesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListSecurityProfilesIterable responses = client.listSecurityProfilesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListSecurityProfilesIterable responses = client
     *             .listSecurityProfilesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListSecurityProfilesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListSecurityProfilesIterable responses = client.listSecurityProfilesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listSecurityProfiles(software.amazon.awssdk.services.connect.model.ListSecurityProfilesRequest)}
     * operation.
     * 
     *
     * @param listSecurityProfilesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListSecurityProfiles
     * @see AWS
     *      API Documentation
     */
    default ListSecurityProfilesIterable listSecurityProfilesPaginator(ListSecurityProfilesRequest listSecurityProfilesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return new ListSecurityProfilesIterable(this, listSecurityProfilesRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listSecurityProfiles(software.amazon.awssdk.services.connect.model.ListSecurityProfilesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListSecurityProfilesIterable responses = client.listSecurityProfilesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListSecurityProfilesIterable responses = client
     *             .listSecurityProfilesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListSecurityProfilesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListSecurityProfilesIterable responses = client.listSecurityProfilesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listSecurityProfiles(software.amazon.awssdk.services.connect.model.ListSecurityProfilesRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListSecurityProfilesRequest.Builder} avoiding the
     * need to create one manually via {@link ListSecurityProfilesRequest#builder()}
     * 
     *
     * @param listSecurityProfilesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListSecurityProfilesRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListSecurityProfiles
     * @see AWS
     *      API Documentation
     */
    default ListSecurityProfilesIterable listSecurityProfilesPaginator(
            Consumer listSecurityProfilesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listSecurityProfilesPaginator(ListSecurityProfilesRequest.builder().applyMutation(listSecurityProfilesRequest)
                .build());
    }

    /**
     * 
     * Lists the tags for the specified resource.
     * 
     * 
     * For sample policies that use tags, see Amazon
     * Connect Identity-Based Policy Examples in the Amazon Connect Administrator Guide.
     * 
     *
     * @param listTagsForResourceRequest
     * @return Result of the ListTagsForResource operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListTagsForResource
     * @see AWS
     *      API Documentation
     */
    default ListTagsForResourceResponse listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
            throws InvalidRequestException, InvalidParameterException, InternalServiceException, ResourceNotFoundException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Lists the tags for the specified resource.
     * 
     * 
     * For sample policies that use tags, see Amazon
     * Connect Identity-Based Policy Examples in the Amazon Connect Administrator Guide.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListTagsForResourceRequest.Builder} avoiding the
     * need to create one manually via {@link ListTagsForResourceRequest#builder()}
     * 
     *
     * @param listTagsForResourceRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListTagsForResourceRequest.Builder} to create a
     *        request.
     * @return Result of the ListTagsForResource operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListTagsForResource
     * @see AWS
     *      API Documentation
     */
    default ListTagsForResourceResponse listTagsForResource(
            Consumer listTagsForResourceRequest) throws InvalidRequestException,
            InvalidParameterException, InternalServiceException, ResourceNotFoundException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return listTagsForResource(ListTagsForResourceRequest.builder().applyMutation(listTagsForResourceRequest).build());
    }

    /**
     * 
     * Lists task templates for the specified Amazon Connect instance.
     * 
     *
     * @param listTaskTemplatesRequest
     * @return Result of the ListTaskTemplates operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListTaskTemplates
     * @see AWS API
     *      Documentation
     */
    default ListTaskTemplatesResponse listTaskTemplates(ListTaskTemplatesRequest listTaskTemplatesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Lists task templates for the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListTaskTemplatesRequest.Builder} avoiding the need
     * to create one manually via {@link ListTaskTemplatesRequest#builder()}
     * 
     *
     * @param listTaskTemplatesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListTaskTemplatesRequest.Builder} to create a
     *        request.
     * @return Result of the ListTaskTemplates operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListTaskTemplates
     * @see AWS API
     *      Documentation
     */
    default ListTaskTemplatesResponse listTaskTemplates(Consumer listTaskTemplatesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listTaskTemplates(ListTaskTemplatesRequest.builder().applyMutation(listTaskTemplatesRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listTaskTemplates(software.amazon.awssdk.services.connect.model.ListTaskTemplatesRequest)} operation. The
     * return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
     * making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListTaskTemplatesIterable responses = client.listTaskTemplatesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListTaskTemplatesIterable responses = client
     *             .listTaskTemplatesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListTaskTemplatesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListTaskTemplatesIterable responses = client.listTaskTemplatesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listTaskTemplates(software.amazon.awssdk.services.connect.model.ListTaskTemplatesRequest)} operation.
     * 
     *
     * @param listTaskTemplatesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListTaskTemplates
     * @see AWS API
     *      Documentation
     */
    default ListTaskTemplatesIterable listTaskTemplatesPaginator(ListTaskTemplatesRequest listTaskTemplatesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return new ListTaskTemplatesIterable(this, listTaskTemplatesRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listTaskTemplates(software.amazon.awssdk.services.connect.model.ListTaskTemplatesRequest)} operation. The
     * return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
     * making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListTaskTemplatesIterable responses = client.listTaskTemplatesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListTaskTemplatesIterable responses = client
     *             .listTaskTemplatesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListTaskTemplatesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListTaskTemplatesIterable responses = client.listTaskTemplatesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listTaskTemplates(software.amazon.awssdk.services.connect.model.ListTaskTemplatesRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListTaskTemplatesRequest.Builder} avoiding the need
     * to create one manually via {@link ListTaskTemplatesRequest#builder()}
     * 
     *
     * @param listTaskTemplatesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListTaskTemplatesRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListTaskTemplates
     * @see AWS API
     *      Documentation
     */
    default ListTaskTemplatesIterable listTaskTemplatesPaginator(
            Consumer listTaskTemplatesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listTaskTemplatesPaginator(ListTaskTemplatesRequest.builder().applyMutation(listTaskTemplatesRequest).build());
    }

    /**
     * 
     * Lists traffic distribution group users.
     * 
     *
     * @param listTrafficDistributionGroupUsersRequest
     * @return Result of the ListTrafficDistributionGroupUsers operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListTrafficDistributionGroupUsers
     * @see AWS API Documentation
     */
    default ListTrafficDistributionGroupUsersResponse listTrafficDistributionGroupUsers(
            ListTrafficDistributionGroupUsersRequest listTrafficDistributionGroupUsersRequest) throws ResourceNotFoundException,
            InvalidRequestException, AccessDeniedException, ThrottlingException, InternalServiceException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Lists traffic distribution group users.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListTrafficDistributionGroupUsersRequest.Builder}
     * avoiding the need to create one manually via {@link ListTrafficDistributionGroupUsersRequest#builder()}
     * 
     *
     * @param listTrafficDistributionGroupUsersRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListTrafficDistributionGroupUsersRequest.Builder} to
     *        create a request.
     * @return Result of the ListTrafficDistributionGroupUsers operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListTrafficDistributionGroupUsers
     * @see AWS API Documentation
     */
    default ListTrafficDistributionGroupUsersResponse listTrafficDistributionGroupUsers(
            Consumer listTrafficDistributionGroupUsersRequest)
            throws ResourceNotFoundException, InvalidRequestException, AccessDeniedException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listTrafficDistributionGroupUsers(ListTrafficDistributionGroupUsersRequest.builder()
                .applyMutation(listTrafficDistributionGroupUsersRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listTrafficDistributionGroupUsers(software.amazon.awssdk.services.connect.model.ListTrafficDistributionGroupUsersRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListTrafficDistributionGroupUsersIterable responses = client.listTrafficDistributionGroupUsersPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListTrafficDistributionGroupUsersIterable responses = client
     *             .listTrafficDistributionGroupUsersPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListTrafficDistributionGroupUsersResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListTrafficDistributionGroupUsersIterable responses = client.listTrafficDistributionGroupUsersPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listTrafficDistributionGroupUsers(software.amazon.awssdk.services.connect.model.ListTrafficDistributionGroupUsersRequest)}
     * operation.
     * 
     *
     * @param listTrafficDistributionGroupUsersRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListTrafficDistributionGroupUsers
     * @see AWS API Documentation
     */
    default ListTrafficDistributionGroupUsersIterable listTrafficDistributionGroupUsersPaginator(
            ListTrafficDistributionGroupUsersRequest listTrafficDistributionGroupUsersRequest) throws ResourceNotFoundException,
            InvalidRequestException, AccessDeniedException, ThrottlingException, InternalServiceException, AwsServiceException,
            SdkClientException, ConnectException {
        return new ListTrafficDistributionGroupUsersIterable(this, listTrafficDistributionGroupUsersRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listTrafficDistributionGroupUsers(software.amazon.awssdk.services.connect.model.ListTrafficDistributionGroupUsersRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListTrafficDistributionGroupUsersIterable responses = client.listTrafficDistributionGroupUsersPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListTrafficDistributionGroupUsersIterable responses = client
     *             .listTrafficDistributionGroupUsersPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListTrafficDistributionGroupUsersResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListTrafficDistributionGroupUsersIterable responses = client.listTrafficDistributionGroupUsersPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listTrafficDistributionGroupUsers(software.amazon.awssdk.services.connect.model.ListTrafficDistributionGroupUsersRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListTrafficDistributionGroupUsersRequest.Builder}
     * avoiding the need to create one manually via {@link ListTrafficDistributionGroupUsersRequest#builder()}
     * 
     *
     * @param listTrafficDistributionGroupUsersRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListTrafficDistributionGroupUsersRequest.Builder} to
     *        create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListTrafficDistributionGroupUsers
     * @see AWS API Documentation
     */
    default ListTrafficDistributionGroupUsersIterable listTrafficDistributionGroupUsersPaginator(
            Consumer listTrafficDistributionGroupUsersRequest)
            throws ResourceNotFoundException, InvalidRequestException, AccessDeniedException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listTrafficDistributionGroupUsersPaginator(ListTrafficDistributionGroupUsersRequest.builder()
                .applyMutation(listTrafficDistributionGroupUsersRequest).build());
    }

    /**
     * 
     * Lists traffic distribution groups.
     * 
     *
     * @param listTrafficDistributionGroupsRequest
     * @return Result of the ListTrafficDistributionGroups operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListTrafficDistributionGroups
     * @see AWS API Documentation
     */
    default ListTrafficDistributionGroupsResponse listTrafficDistributionGroups(
            ListTrafficDistributionGroupsRequest listTrafficDistributionGroupsRequest) throws InvalidRequestException,
            AccessDeniedException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Lists traffic distribution groups.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListTrafficDistributionGroupsRequest.Builder}
     * avoiding the need to create one manually via {@link ListTrafficDistributionGroupsRequest#builder()}
     * 
     *
     * @param listTrafficDistributionGroupsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListTrafficDistributionGroupsRequest.Builder} to
     *        create a request.
     * @return Result of the ListTrafficDistributionGroups operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListTrafficDistributionGroups
     * @see AWS API Documentation
     */
    default ListTrafficDistributionGroupsResponse listTrafficDistributionGroups(
            Consumer listTrafficDistributionGroupsRequest)
            throws InvalidRequestException, AccessDeniedException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listTrafficDistributionGroups(ListTrafficDistributionGroupsRequest.builder()
                .applyMutation(listTrafficDistributionGroupsRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listTrafficDistributionGroups(software.amazon.awssdk.services.connect.model.ListTrafficDistributionGroupsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListTrafficDistributionGroupsIterable responses = client.listTrafficDistributionGroupsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListTrafficDistributionGroupsIterable responses = client
     *             .listTrafficDistributionGroupsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListTrafficDistributionGroupsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListTrafficDistributionGroupsIterable responses = client.listTrafficDistributionGroupsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listTrafficDistributionGroups(software.amazon.awssdk.services.connect.model.ListTrafficDistributionGroupsRequest)}
     * operation.
     * 
     *
     * @param listTrafficDistributionGroupsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListTrafficDistributionGroups
     * @see AWS API Documentation
     */
    default ListTrafficDistributionGroupsIterable listTrafficDistributionGroupsPaginator(
            ListTrafficDistributionGroupsRequest listTrafficDistributionGroupsRequest) throws InvalidRequestException,
            AccessDeniedException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        return new ListTrafficDistributionGroupsIterable(this, listTrafficDistributionGroupsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listTrafficDistributionGroups(software.amazon.awssdk.services.connect.model.ListTrafficDistributionGroupsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListTrafficDistributionGroupsIterable responses = client.listTrafficDistributionGroupsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListTrafficDistributionGroupsIterable responses = client
     *             .listTrafficDistributionGroupsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListTrafficDistributionGroupsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListTrafficDistributionGroupsIterable responses = client.listTrafficDistributionGroupsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listTrafficDistributionGroups(software.amazon.awssdk.services.connect.model.ListTrafficDistributionGroupsRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListTrafficDistributionGroupsRequest.Builder}
     * avoiding the need to create one manually via {@link ListTrafficDistributionGroupsRequest#builder()}
     * 
     *
     * @param listTrafficDistributionGroupsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListTrafficDistributionGroupsRequest.Builder} to
     *        create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListTrafficDistributionGroups
     * @see AWS API Documentation
     */
    default ListTrafficDistributionGroupsIterable listTrafficDistributionGroupsPaginator(
            Consumer listTrafficDistributionGroupsRequest)
            throws InvalidRequestException, AccessDeniedException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listTrafficDistributionGroupsPaginator(ListTrafficDistributionGroupsRequest.builder()
                .applyMutation(listTrafficDistributionGroupsRequest).build());
    }

    /**
     * 
     * Lists the use cases for the integration association.
     * 
     *
     * @param listUseCasesRequest
     *        Provides summary information about the use cases for the specified integration association.
     * @return Result of the ListUseCases operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListUseCases
     * @see AWS API
     *      Documentation
     */
    default ListUseCasesResponse listUseCases(ListUseCasesRequest listUseCasesRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, ThrottlingException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Lists the use cases for the integration association.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListUseCasesRequest.Builder} avoiding the need to
     * create one manually via {@link ListUseCasesRequest#builder()}
     * 
     *
     * @param listUseCasesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListUseCasesRequest.Builder} to create a request.
     *        Provides summary information about the use cases for the specified integration association.
     * @return Result of the ListUseCases operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListUseCases
     * @see AWS API
     *      Documentation
     */
    default ListUseCasesResponse listUseCases(Consumer listUseCasesRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return listUseCases(ListUseCasesRequest.builder().applyMutation(listUseCasesRequest).build());
    }

    /**
     * 
     * This is a variant of {@link #listUseCases(software.amazon.awssdk.services.connect.model.ListUseCasesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListUseCasesIterable responses = client.listUseCasesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListUseCasesIterable responses = client.listUseCasesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListUseCasesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListUseCasesIterable responses = client.listUseCasesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listUseCases(software.amazon.awssdk.services.connect.model.ListUseCasesRequest)} operation.
     * 
     *
     * @param listUseCasesRequest
     *        Provides summary information about the use cases for the specified integration association.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListUseCases
     * @see AWS API
     *      Documentation
     */
    default ListUseCasesIterable listUseCasesPaginator(ListUseCasesRequest listUseCasesRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, ThrottlingException, AwsServiceException, SdkClientException,
            ConnectException {
        return new ListUseCasesIterable(this, listUseCasesRequest);
    }

    /**
     * 
     * This is a variant of {@link #listUseCases(software.amazon.awssdk.services.connect.model.ListUseCasesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListUseCasesIterable responses = client.listUseCasesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListUseCasesIterable responses = client.listUseCasesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListUseCasesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListUseCasesIterable responses = client.listUseCasesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listUseCases(software.amazon.awssdk.services.connect.model.ListUseCasesRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListUseCasesRequest.Builder} avoiding the need to
     * create one manually via {@link ListUseCasesRequest#builder()}
     * 
     *
     * @param listUseCasesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListUseCasesRequest.Builder} to create a request.
     *        Provides summary information about the use cases for the specified integration association.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListUseCases
     * @see AWS API
     *      Documentation
     */
    default ListUseCasesIterable listUseCasesPaginator(Consumer listUseCasesRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return listUseCasesPaginator(ListUseCasesRequest.builder().applyMutation(listUseCasesRequest).build());
    }

    /**
     * 
     * Provides summary information about the hierarchy groups for the specified Amazon Connect instance.
     * 
     * 
     * For more information about agent hierarchies, see Set Up Agent Hierarchies in
     * the Amazon Connect Administrator Guide.
     * 
     *
     * @param listUserHierarchyGroupsRequest
     * @return Result of the ListUserHierarchyGroups operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListUserHierarchyGroups
     * @see AWS API Documentation
     */
    default ListUserHierarchyGroupsResponse listUserHierarchyGroups(ListUserHierarchyGroupsRequest listUserHierarchyGroupsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Provides summary information about the hierarchy groups for the specified Amazon Connect instance.
     * 
     * 
     * For more information about agent hierarchies, see Set Up Agent Hierarchies in
     * the Amazon Connect Administrator Guide.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListUserHierarchyGroupsRequest.Builder} avoiding
     * the need to create one manually via {@link ListUserHierarchyGroupsRequest#builder()}
     * 
     *
     * @param listUserHierarchyGroupsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListUserHierarchyGroupsRequest.Builder} to create a
     *        request.
     * @return Result of the ListUserHierarchyGroups operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListUserHierarchyGroups
     * @see AWS API Documentation
     */
    default ListUserHierarchyGroupsResponse listUserHierarchyGroups(
            Consumer listUserHierarchyGroupsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listUserHierarchyGroups(ListUserHierarchyGroupsRequest.builder().applyMutation(listUserHierarchyGroupsRequest)
                .build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listUserHierarchyGroups(software.amazon.awssdk.services.connect.model.ListUserHierarchyGroupsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListUserHierarchyGroupsIterable responses = client.listUserHierarchyGroupsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListUserHierarchyGroupsIterable responses = client
     *             .listUserHierarchyGroupsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListUserHierarchyGroupsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListUserHierarchyGroupsIterable responses = client.listUserHierarchyGroupsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listUserHierarchyGroups(software.amazon.awssdk.services.connect.model.ListUserHierarchyGroupsRequest)}
     * operation.
     * 
     *
     * @param listUserHierarchyGroupsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListUserHierarchyGroups
     * @see AWS API Documentation
     */
    default ListUserHierarchyGroupsIterable listUserHierarchyGroupsPaginator(
            ListUserHierarchyGroupsRequest listUserHierarchyGroupsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return new ListUserHierarchyGroupsIterable(this, listUserHierarchyGroupsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listUserHierarchyGroups(software.amazon.awssdk.services.connect.model.ListUserHierarchyGroupsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListUserHierarchyGroupsIterable responses = client.listUserHierarchyGroupsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListUserHierarchyGroupsIterable responses = client
     *             .listUserHierarchyGroupsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListUserHierarchyGroupsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListUserHierarchyGroupsIterable responses = client.listUserHierarchyGroupsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listUserHierarchyGroups(software.amazon.awssdk.services.connect.model.ListUserHierarchyGroupsRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListUserHierarchyGroupsRequest.Builder} avoiding
     * the need to create one manually via {@link ListUserHierarchyGroupsRequest#builder()}
     * 
     *
     * @param listUserHierarchyGroupsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListUserHierarchyGroupsRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListUserHierarchyGroups
     * @see AWS API Documentation
     */
    default ListUserHierarchyGroupsIterable listUserHierarchyGroupsPaginator(
            Consumer listUserHierarchyGroupsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listUserHierarchyGroupsPaginator(ListUserHierarchyGroupsRequest.builder()
                .applyMutation(listUserHierarchyGroupsRequest).build());
    }

    /**
     * 
     * Lists proficiencies associated with a user.
     * 
     *
     * @param listUserProficienciesRequest
     * @return Result of the ListUserProficiencies operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListUserProficiencies
     * @see AWS
     *      API Documentation
     */
    default ListUserProficienciesResponse listUserProficiencies(ListUserProficienciesRequest listUserProficienciesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Lists proficiencies associated with a user.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListUserProficienciesRequest.Builder} avoiding the
     * need to create one manually via {@link ListUserProficienciesRequest#builder()}
     * 
     *
     * @param listUserProficienciesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListUserProficienciesRequest.Builder} to create a
     *        request.
     * @return Result of the ListUserProficiencies operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListUserProficiencies
     * @see AWS
     *      API Documentation
     */
    default ListUserProficienciesResponse listUserProficiencies(
            Consumer listUserProficienciesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listUserProficiencies(ListUserProficienciesRequest.builder().applyMutation(listUserProficienciesRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listUserProficiencies(software.amazon.awssdk.services.connect.model.ListUserProficienciesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListUserProficienciesIterable responses = client.listUserProficienciesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListUserProficienciesIterable responses = client
     *             .listUserProficienciesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListUserProficienciesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListUserProficienciesIterable responses = client.listUserProficienciesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listUserProficiencies(software.amazon.awssdk.services.connect.model.ListUserProficienciesRequest)}
     * operation.
     * 
     *
     * @param listUserProficienciesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListUserProficiencies
     * @see AWS
     *      API Documentation
     */
    default ListUserProficienciesIterable listUserProficienciesPaginator(ListUserProficienciesRequest listUserProficienciesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return new ListUserProficienciesIterable(this, listUserProficienciesRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listUserProficiencies(software.amazon.awssdk.services.connect.model.ListUserProficienciesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListUserProficienciesIterable responses = client.listUserProficienciesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListUserProficienciesIterable responses = client
     *             .listUserProficienciesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListUserProficienciesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListUserProficienciesIterable responses = client.listUserProficienciesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listUserProficiencies(software.amazon.awssdk.services.connect.model.ListUserProficienciesRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListUserProficienciesRequest.Builder} avoiding the
     * need to create one manually via {@link ListUserProficienciesRequest#builder()}
     * 
     *
     * @param listUserProficienciesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListUserProficienciesRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListUserProficiencies
     * @see AWS
     *      API Documentation
     */
    default ListUserProficienciesIterable listUserProficienciesPaginator(
            Consumer listUserProficienciesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listUserProficienciesPaginator(ListUserProficienciesRequest.builder().applyMutation(listUserProficienciesRequest)
                .build());
    }

    /**
     * 
     * Provides summary information about the users for the specified Amazon Connect instance.
     * 
     *
     * @param listUsersRequest
     * @return Result of the ListUsers operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListUsers
     * @see AWS API
     *      Documentation
     */
    default ListUsersResponse listUsers(ListUsersRequest listUsersRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Provides summary information about the users for the specified Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListUsersRequest.Builder} avoiding the need to
     * create one manually via {@link ListUsersRequest#builder()}
     * 
     *
     * @param listUsersRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListUsersRequest.Builder} to create a request.
     * @return Result of the ListUsers operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListUsers
     * @see AWS API
     *      Documentation
     */
    default ListUsersResponse listUsers(Consumer listUsersRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return listUsers(ListUsersRequest.builder().applyMutation(listUsersRequest).build());
    }

    /**
     * 
     * This is a variant of {@link #listUsers(software.amazon.awssdk.services.connect.model.ListUsersRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListUsersIterable responses = client.listUsersPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListUsersIterable responses = client.listUsersPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListUsersResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListUsersIterable responses = client.listUsersPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listUsers(software.amazon.awssdk.services.connect.model.ListUsersRequest)} operation.
     * 
     *
     * @param listUsersRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListUsers
     * @see AWS API
     *      Documentation
     */
    default ListUsersIterable listUsersPaginator(ListUsersRequest listUsersRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return new ListUsersIterable(this, listUsersRequest);
    }

    /**
     * 
     * This is a variant of {@link #listUsers(software.amazon.awssdk.services.connect.model.ListUsersRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListUsersIterable responses = client.listUsersPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListUsersIterable responses = client.listUsersPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListUsersResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListUsersIterable responses = client.listUsersPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listUsers(software.amazon.awssdk.services.connect.model.ListUsersRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListUsersRequest.Builder} avoiding the need to
     * create one manually via {@link ListUsersRequest#builder()}
     * 
     *
     * @param listUsersRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListUsersRequest.Builder} to create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListUsers
     * @see AWS API
     *      Documentation
     */
    default ListUsersIterable listUsersPaginator(Consumer listUsersRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return listUsersPaginator(ListUsersRequest.builder().applyMutation(listUsersRequest).build());
    }

    /**
     * 
     * Returns all the available versions for the specified Amazon Connect instance and view identifier.
     * 
     * 
     * Results will be sorted from highest to lowest.
     * 
     *
     * @param listViewVersionsRequest
     * @return Result of the ListViewVersions operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListViewVersions
     * @see AWS API
     *      Documentation
     */
    default ListViewVersionsResponse listViewVersions(ListViewVersionsRequest listViewVersionsRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            InternalServiceException, TooManyRequestsException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Returns all the available versions for the specified Amazon Connect instance and view identifier.
     * 
     * 
     * Results will be sorted from highest to lowest.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListViewVersionsRequest.Builder} avoiding the need
     * to create one manually via {@link ListViewVersionsRequest#builder()}
     * 
     *
     * @param listViewVersionsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListViewVersionsRequest.Builder} to create a request.
     * @return Result of the ListViewVersions operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListViewVersions
     * @see AWS API
     *      Documentation
     */
    default ListViewVersionsResponse listViewVersions(Consumer listViewVersionsRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            InternalServiceException, TooManyRequestsException, AwsServiceException, SdkClientException, ConnectException {
        return listViewVersions(ListViewVersionsRequest.builder().applyMutation(listViewVersionsRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #listViewVersions(software.amazon.awssdk.services.connect.model.ListViewVersionsRequest)} operation. The
     * return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
     * making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListViewVersionsIterable responses = client.listViewVersionsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListViewVersionsIterable responses = client
     *             .listViewVersionsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListViewVersionsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListViewVersionsIterable responses = client.listViewVersionsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listViewVersions(software.amazon.awssdk.services.connect.model.ListViewVersionsRequest)} operation.
     * 
     *
     * @param listViewVersionsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListViewVersions
     * @see AWS API
     *      Documentation
     */
    default ListViewVersionsIterable listViewVersionsPaginator(ListViewVersionsRequest listViewVersionsRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            InternalServiceException, TooManyRequestsException, AwsServiceException, SdkClientException, ConnectException {
        return new ListViewVersionsIterable(this, listViewVersionsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #listViewVersions(software.amazon.awssdk.services.connect.model.ListViewVersionsRequest)} operation. The
     * return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle
     * making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListViewVersionsIterable responses = client.listViewVersionsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListViewVersionsIterable responses = client
     *             .listViewVersionsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListViewVersionsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListViewVersionsIterable responses = client.listViewVersionsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listViewVersions(software.amazon.awssdk.services.connect.model.ListViewVersionsRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListViewVersionsRequest.Builder} avoiding the need
     * to create one manually via {@link ListViewVersionsRequest#builder()}
     * 
     *
     * @param listViewVersionsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListViewVersionsRequest.Builder} to create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListViewVersions
     * @see AWS API
     *      Documentation
     */
    default ListViewVersionsIterable listViewVersionsPaginator(Consumer listViewVersionsRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            InternalServiceException, TooManyRequestsException, AwsServiceException, SdkClientException, ConnectException {
        return listViewVersionsPaginator(ListViewVersionsRequest.builder().applyMutation(listViewVersionsRequest).build());
    }

    /**
     * 
     * Returns views in the given instance.
     * 
     * 
     * Results are sorted primarily by type, and secondarily by name.
     * 
     *
     * @param listViewsRequest
     * @return Result of the ListViews operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListViews
     * @see AWS API
     *      Documentation
     */
    default ListViewsResponse listViews(ListViewsRequest listViewsRequest) throws AccessDeniedException, InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, InternalServiceException, TooManyRequestsException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Returns views in the given instance.
     * 
     * 
     * Results are sorted primarily by type, and secondarily by name.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListViewsRequest.Builder} avoiding the need to
     * create one manually via {@link ListViewsRequest#builder()}
     * 
     *
     * @param listViewsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListViewsRequest.Builder} to create a request.
     * @return Result of the ListViews operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListViews
     * @see AWS API
     *      Documentation
     */
    default ListViewsResponse listViews(Consumer listViewsRequest) throws AccessDeniedException,
            InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            TooManyRequestsException, AwsServiceException, SdkClientException, ConnectException {
        return listViews(ListViewsRequest.builder().applyMutation(listViewsRequest).build());
    }

    /**
     * 
     * This is a variant of {@link #listViews(software.amazon.awssdk.services.connect.model.ListViewsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListViewsIterable responses = client.listViewsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListViewsIterable responses = client.listViewsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListViewsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListViewsIterable responses = client.listViewsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listViews(software.amazon.awssdk.services.connect.model.ListViewsRequest)} operation.
     * 
     *
     * @param listViewsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListViews
     * @see AWS API
     *      Documentation
     */
    default ListViewsIterable listViewsPaginator(ListViewsRequest listViewsRequest) throws AccessDeniedException,
            InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            TooManyRequestsException, AwsServiceException, SdkClientException, ConnectException {
        return new ListViewsIterable(this, listViewsRequest);
    }

    /**
     * 
     * This is a variant of {@link #listViews(software.amazon.awssdk.services.connect.model.ListViewsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListViewsIterable responses = client.listViewsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.ListViewsIterable responses = client.listViewsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.ListViewsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.ListViewsIterable responses = client.listViewsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #listViews(software.amazon.awssdk.services.connect.model.ListViewsRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ListViewsRequest.Builder} avoiding the need to
     * create one manually via {@link ListViewsRequest#builder()}
     * 
     *
     * @param listViewsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ListViewsRequest.Builder} to create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ListViews
     * @see AWS API
     *      Documentation
     */
    default ListViewsIterable listViewsPaginator(Consumer listViewsRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            InternalServiceException, TooManyRequestsException, AwsServiceException, SdkClientException, ConnectException {
        return listViewsPaginator(ListViewsRequest.builder().applyMutation(listViewsRequest).build());
    }

    /**
     * 
     * Initiates silent monitoring of a contact. The Contact Control Panel (CCP) of the user specified by userId
     * will be set to silent monitoring mode on the contact.
     * 
     *
     * @param monitorContactRequest
     * @return Result of the MonitorContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws IdempotencyException
     *         An entity with the same name already exists.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.MonitorContact
     * @see AWS API
     *      Documentation
     */
    default MonitorContactResponse monitorContact(MonitorContactRequest monitorContactRequest) throws InvalidRequestException,
            IdempotencyException, AccessDeniedException, ResourceNotFoundException, ServiceQuotaExceededException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Initiates silent monitoring of a contact. The Contact Control Panel (CCP) of the user specified by userId
     * will be set to silent monitoring mode on the contact.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link MonitorContactRequest.Builder} avoiding the need to
     * create one manually via {@link MonitorContactRequest#builder()}
     * 
     *
     * @param monitorContactRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.MonitorContactRequest.Builder} to create a request.
     * @return Result of the MonitorContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws IdempotencyException
     *         An entity with the same name already exists.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.MonitorContact
     * @see AWS API
     *      Documentation
     */
    default MonitorContactResponse monitorContact(Consumer monitorContactRequest)
            throws InvalidRequestException, IdempotencyException, AccessDeniedException, ResourceNotFoundException,
            ServiceQuotaExceededException, ThrottlingException, InternalServiceException, AwsServiceException,
            SdkClientException, ConnectException {
        return monitorContact(MonitorContactRequest.builder().applyMutation(monitorContactRequest).build());
    }

    /**
     * 
     * Allows pausing an ongoing task contact.
     * 
     *
     * @param pauseContactRequest
     * @return Result of the PauseContact operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ConflictException
     *         Operation cannot be performed at this time as there is a conflict with another operation or contact
     *         state.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.PauseContact
     * @see AWS API
     *      Documentation
     */
    default PauseContactResponse pauseContact(PauseContactRequest pauseContactRequest) throws AccessDeniedException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            ThrottlingException, LimitExceededException, ConflictException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Allows pausing an ongoing task contact.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link PauseContactRequest.Builder} avoiding the need to
     * create one manually via {@link PauseContactRequest#builder()}
     * 
     *
     * @param pauseContactRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.PauseContactRequest.Builder} to create a request.
     * @return Result of the PauseContact operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ConflictException
     *         Operation cannot be performed at this time as there is a conflict with another operation or contact
     *         state.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.PauseContact
     * @see AWS API
     *      Documentation
     */
    default PauseContactResponse pauseContact(Consumer pauseContactRequest)
            throws AccessDeniedException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, LimitExceededException, ConflictException, AwsServiceException,
            SdkClientException, ConnectException {
        return pauseContact(PauseContactRequest.builder().applyMutation(pauseContactRequest).build());
    }

    /**
     * 
     * Changes the current status of a user or agent in Amazon Connect. If the agent is currently handling a contact,
     * this sets the agent's next status.
     * 
     * 
     * For more information, see Agent status and Set your next status in the
     * Amazon Connect Administrator Guide.
     * 
     *
     * @param putUserStatusRequest
     * @return Result of the PutUserStatus operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.PutUserStatus
     * @see AWS API
     *      Documentation
     */
    default PutUserStatusResponse putUserStatus(PutUserStatusRequest putUserStatusRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, AccessDeniedException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Changes the current status of a user or agent in Amazon Connect. If the agent is currently handling a contact,
     * this sets the agent's next status.
     * 
     * 
     * For more information, see Agent status and Set your next status in the
     * Amazon Connect Administrator Guide.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link PutUserStatusRequest.Builder} avoiding the need to
     * create one manually via {@link PutUserStatusRequest#builder()}
     * 
     *
     * @param putUserStatusRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.PutUserStatusRequest.Builder} to create a request.
     * @return Result of the PutUserStatus operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.PutUserStatus
     * @see AWS API
     *      Documentation
     */
    default PutUserStatusResponse putUserStatus(Consumer putUserStatusRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            AccessDeniedException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return putUserStatus(PutUserStatusRequest.builder().applyMutation(putUserStatusRequest).build());
    }

    /**
     * 
     * Releases a phone number previously claimed to an Amazon Connect instance or traffic distribution group. You can
     * call this API only in the Amazon Web Services Region where the number was claimed.
     * 
     * 
     * 
     * To release phone numbers from a traffic distribution group, use the ReleasePhoneNumber API, not the
     * Amazon Connect admin website.
     * 
     * 
     * After releasing a phone number, the phone number enters into a cooldown period for up to 180 days. It cannot be
     * searched for or claimed again until the period has ended. If you accidentally release a phone number, contact
     * Amazon Web Services Support.
     * 
     * 
     * 
     * If you plan to claim and release numbers frequently, contact us for a service quota exception. Otherwise, it is
     * possible you will be blocked from claiming and releasing any more numbers until up to 180 days past the oldest
     * number released has expired.
     * 
     * 
     * By default you can claim and release up to 200% of your maximum number of active phone numbers. If you claim and
     * release phone numbers using the UI or API during a rolling 180 day cycle that exceeds 200% of your phone number
     * service level quota, you will be blocked from claiming any more numbers until 180 days past the oldest number
     * released has expired.
     * 
     * 
     * For example, if you already have 99 claimed numbers and a service level quota of 99 phone numbers, and in any 180
     * day period you release 99, claim 99, and then release 99, you will have exceeded the 200% limit. At that point
     * you are blocked from claiming any more numbers until you open an Amazon Web Services support ticket.
     * 
     *
     * @param releasePhoneNumberRequest
     * @return Result of the ReleasePhoneNumber operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws IdempotencyException
     *         An entity with the same name already exists.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ReleasePhoneNumber
     * @see AWS
     *      API Documentation
     */
    default ReleasePhoneNumberResponse releasePhoneNumber(ReleasePhoneNumberRequest releasePhoneNumberRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            ResourceInUseException, IdempotencyException, AccessDeniedException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Releases a phone number previously claimed to an Amazon Connect instance or traffic distribution group. You can
     * call this API only in the Amazon Web Services Region where the number was claimed.
     * 
     * 
     * 
     * To release phone numbers from a traffic distribution group, use the ReleasePhoneNumber API, not the
     * Amazon Connect admin website.
     * 
     * 
     * After releasing a phone number, the phone number enters into a cooldown period for up to 180 days. It cannot be
     * searched for or claimed again until the period has ended. If you accidentally release a phone number, contact
     * Amazon Web Services Support.
     * 
     * 
     * 
     * If you plan to claim and release numbers frequently, contact us for a service quota exception. Otherwise, it is
     * possible you will be blocked from claiming and releasing any more numbers until up to 180 days past the oldest
     * number released has expired.
     * 
     * 
     * By default you can claim and release up to 200% of your maximum number of active phone numbers. If you claim and
     * release phone numbers using the UI or API during a rolling 180 day cycle that exceeds 200% of your phone number
     * service level quota, you will be blocked from claiming any more numbers until 180 days past the oldest number
     * released has expired.
     * 
     * 
     * For example, if you already have 99 claimed numbers and a service level quota of 99 phone numbers, and in any 180
     * day period you release 99, claim 99, and then release 99, you will have exceeded the 200% limit. At that point
     * you are blocked from claiming any more numbers until you open an Amazon Web Services support ticket.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ReleasePhoneNumberRequest.Builder} avoiding the
     * need to create one manually via {@link ReleasePhoneNumberRequest#builder()}
     * 
     *
     * @param releasePhoneNumberRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ReleasePhoneNumberRequest.Builder} to create a
     *        request.
     * @return Result of the ReleasePhoneNumber operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws IdempotencyException
     *         An entity with the same name already exists.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ReleasePhoneNumber
     * @see AWS
     *      API Documentation
     */
    default ReleasePhoneNumberResponse releasePhoneNumber(Consumer releasePhoneNumberRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            ResourceInUseException, IdempotencyException, AccessDeniedException, AwsServiceException, SdkClientException,
            ConnectException {
        return releasePhoneNumber(ReleasePhoneNumberRequest.builder().applyMutation(releasePhoneNumberRequest).build());
    }

    /**
     * 
     * Replicates an Amazon Connect instance in the specified Amazon Web Services Region and copies configuration
     * information for Amazon Connect resources across Amazon Web Services Regions.
     * 
     * 
     * For more information about replicating an Amazon Connect instance, see Create a
     * replica of your existing Amazon Connect instance in the Amazon Connect Administrator Guide.
     * 
     *
     * @param replicateInstanceRequest
     * @return Result of the ReplicateInstance operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceNotReadyException
     *         The resource is not ready.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ReplicateInstance
     * @see AWS API
     *      Documentation
     */
    default ReplicateInstanceResponse replicateInstance(ReplicateInstanceRequest replicateInstanceRequest)
            throws InvalidRequestException, AccessDeniedException, ServiceQuotaExceededException, ThrottlingException,
            ResourceNotFoundException, InternalServiceException, ResourceNotReadyException, ResourceConflictException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Replicates an Amazon Connect instance in the specified Amazon Web Services Region and copies configuration
     * information for Amazon Connect resources across Amazon Web Services Regions.
     * 
     * 
     * For more information about replicating an Amazon Connect instance, see Create a
     * replica of your existing Amazon Connect instance in the Amazon Connect Administrator Guide.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ReplicateInstanceRequest.Builder} avoiding the need
     * to create one manually via {@link ReplicateInstanceRequest#builder()}
     * 
     *
     * @param replicateInstanceRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ReplicateInstanceRequest.Builder} to create a
     *        request.
     * @return Result of the ReplicateInstance operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceNotReadyException
     *         The resource is not ready.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ReplicateInstance
     * @see AWS API
     *      Documentation
     */
    default ReplicateInstanceResponse replicateInstance(Consumer replicateInstanceRequest)
            throws InvalidRequestException, AccessDeniedException, ServiceQuotaExceededException, ThrottlingException,
            ResourceNotFoundException, InternalServiceException, ResourceNotReadyException, ResourceConflictException,
            AwsServiceException, SdkClientException, ConnectException {
        return replicateInstance(ReplicateInstanceRequest.builder().applyMutation(replicateInstanceRequest).build());
    }

    /**
     * 
     * Allows resuming a task contact in a paused state.
     * 
     *
     * @param resumeContactRequest
     * @return Result of the ResumeContact operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ConflictException
     *         Operation cannot be performed at this time as there is a conflict with another operation or contact
     *         state.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ResumeContact
     * @see AWS API
     *      Documentation
     */
    default ResumeContactResponse resumeContact(ResumeContactRequest resumeContactRequest) throws AccessDeniedException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            ThrottlingException, ConflictException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Allows resuming a task contact in a paused state.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ResumeContactRequest.Builder} avoiding the need to
     * create one manually via {@link ResumeContactRequest#builder()}
     * 
     *
     * @param resumeContactRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ResumeContactRequest.Builder} to create a request.
     * @return Result of the ResumeContact operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ConflictException
     *         Operation cannot be performed at this time as there is a conflict with another operation or contact
     *         state.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ResumeContact
     * @see AWS API
     *      Documentation
     */
    default ResumeContactResponse resumeContact(Consumer resumeContactRequest)
            throws AccessDeniedException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, ConflictException, AwsServiceException, SdkClientException,
            ConnectException {
        return resumeContact(ResumeContactRequest.builder().applyMutation(resumeContactRequest).build());
    }

    /**
     * 
     * When a contact is being recorded, and the recording has been suspended using SuspendContactRecording, this API
     * resumes recording whatever recording is selected in the flow configuration: call, screen, or both. If only call
     * recording or only screen recording is enabled, then it would resume.
     * 
     * 
     * Voice and screen recordings are supported.
     * 
     *
     * @param resumeContactRecordingRequest
     * @return Result of the ResumeContactRecording operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ResumeContactRecording
     * @see AWS API Documentation
     */
    default ResumeContactRecordingResponse resumeContactRecording(ResumeContactRecordingRequest resumeContactRecordingRequest)
            throws InvalidRequestException, ResourceNotFoundException, InternalServiceException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * When a contact is being recorded, and the recording has been suspended using SuspendContactRecording, this API
     * resumes recording whatever recording is selected in the flow configuration: call, screen, or both. If only call
     * recording or only screen recording is enabled, then it would resume.
     * 
     * 
     * Voice and screen recordings are supported.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link ResumeContactRecordingRequest.Builder} avoiding the
     * need to create one manually via {@link ResumeContactRecordingRequest#builder()}
     * 
     *
     * @param resumeContactRecordingRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.ResumeContactRecordingRequest.Builder} to create a
     *        request.
     * @return Result of the ResumeContactRecording operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.ResumeContactRecording
     * @see AWS API Documentation
     */
    default ResumeContactRecordingResponse resumeContactRecording(
            Consumer resumeContactRecordingRequest) throws InvalidRequestException,
            ResourceNotFoundException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return resumeContactRecording(ResumeContactRecordingRequest.builder().applyMutation(resumeContactRecordingRequest)
                .build());
    }

    /**
     * 
     * Searches AgentStatuses in an Amazon Connect instance, with optional filtering.
     * 
     *
     * @param searchAgentStatusesRequest
     * @return Result of the SearchAgentStatuses operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchAgentStatuses
     * @see AWS
     *      API Documentation
     */
    default SearchAgentStatusesResponse searchAgentStatuses(SearchAgentStatusesRequest searchAgentStatusesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Searches AgentStatuses in an Amazon Connect instance, with optional filtering.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchAgentStatusesRequest.Builder} avoiding the
     * need to create one manually via {@link SearchAgentStatusesRequest#builder()}
     * 
     *
     * @param searchAgentStatusesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchAgentStatusesRequest.Builder} to create a
     *        request.
     * @return Result of the SearchAgentStatuses operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchAgentStatuses
     * @see AWS
     *      API Documentation
     */
    default SearchAgentStatusesResponse searchAgentStatuses(
            Consumer searchAgentStatusesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return searchAgentStatuses(SearchAgentStatusesRequest.builder().applyMutation(searchAgentStatusesRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #searchAgentStatuses(software.amazon.awssdk.services.connect.model.SearchAgentStatusesRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchAgentStatusesIterable responses = client.searchAgentStatusesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchAgentStatusesIterable responses = client
     *             .searchAgentStatusesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchAgentStatusesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchAgentStatusesIterable responses = client.searchAgentStatusesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchAgentStatuses(software.amazon.awssdk.services.connect.model.SearchAgentStatusesRequest)}
     * operation.
     * 
     *
     * @param searchAgentStatusesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchAgentStatuses
     * @see AWS
     *      API Documentation
     */
    default SearchAgentStatusesIterable searchAgentStatusesPaginator(SearchAgentStatusesRequest searchAgentStatusesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return new SearchAgentStatusesIterable(this, searchAgentStatusesRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #searchAgentStatuses(software.amazon.awssdk.services.connect.model.SearchAgentStatusesRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchAgentStatusesIterable responses = client.searchAgentStatusesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchAgentStatusesIterable responses = client
     *             .searchAgentStatusesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchAgentStatusesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchAgentStatusesIterable responses = client.searchAgentStatusesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchAgentStatuses(software.amazon.awssdk.services.connect.model.SearchAgentStatusesRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchAgentStatusesRequest.Builder} avoiding the
     * need to create one manually via {@link SearchAgentStatusesRequest#builder()}
     * 
     *
     * @param searchAgentStatusesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchAgentStatusesRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchAgentStatuses
     * @see AWS
     *      API Documentation
     */
    default SearchAgentStatusesIterable searchAgentStatusesPaginator(
            Consumer searchAgentStatusesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return searchAgentStatusesPaginator(SearchAgentStatusesRequest.builder().applyMutation(searchAgentStatusesRequest)
                .build());
    }

    /**
     * 
     * Searches for available phone numbers that you can claim to your Amazon Connect instance or traffic distribution
     * group. If the provided TargetArn is a traffic distribution group, you can call this API in both
     * Amazon Web Services Regions associated with the traffic distribution group.
     * 
     *
     * @param searchAvailablePhoneNumbersRequest
     * @return Result of the SearchAvailablePhoneNumbers operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchAvailablePhoneNumbers
     * @see AWS API Documentation
     */
    default SearchAvailablePhoneNumbersResponse searchAvailablePhoneNumbers(
            SearchAvailablePhoneNumbersRequest searchAvailablePhoneNumbersRequest) throws InvalidParameterException,
            ThrottlingException, InternalServiceException, AccessDeniedException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Searches for available phone numbers that you can claim to your Amazon Connect instance or traffic distribution
     * group. If the provided TargetArn is a traffic distribution group, you can call this API in both
     * Amazon Web Services Regions associated with the traffic distribution group.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchAvailablePhoneNumbersRequest.Builder}
     * avoiding the need to create one manually via {@link SearchAvailablePhoneNumbersRequest#builder()}
     * 
     *
     * @param searchAvailablePhoneNumbersRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchAvailablePhoneNumbersRequest.Builder} to create
     *        a request.
     * @return Result of the SearchAvailablePhoneNumbers operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchAvailablePhoneNumbers
     * @see AWS API Documentation
     */
    default SearchAvailablePhoneNumbersResponse searchAvailablePhoneNumbers(
            Consumer searchAvailablePhoneNumbersRequest)
            throws InvalidParameterException, ThrottlingException, InternalServiceException, AccessDeniedException,
            AwsServiceException, SdkClientException, ConnectException {
        return searchAvailablePhoneNumbers(SearchAvailablePhoneNumbersRequest.builder()
                .applyMutation(searchAvailablePhoneNumbersRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #searchAvailablePhoneNumbers(software.amazon.awssdk.services.connect.model.SearchAvailablePhoneNumbersRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchAvailablePhoneNumbersIterable responses = client.searchAvailablePhoneNumbersPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchAvailablePhoneNumbersIterable responses = client
     *             .searchAvailablePhoneNumbersPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchAvailablePhoneNumbersResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchAvailablePhoneNumbersIterable responses = client.searchAvailablePhoneNumbersPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchAvailablePhoneNumbers(software.amazon.awssdk.services.connect.model.SearchAvailablePhoneNumbersRequest)}
     * operation.
     * 
     *
     * @param searchAvailablePhoneNumbersRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchAvailablePhoneNumbers
     * @see AWS API Documentation
     */
    default SearchAvailablePhoneNumbersIterable searchAvailablePhoneNumbersPaginator(
            SearchAvailablePhoneNumbersRequest searchAvailablePhoneNumbersRequest) throws InvalidParameterException,
            ThrottlingException, InternalServiceException, AccessDeniedException, AwsServiceException, SdkClientException,
            ConnectException {
        return new SearchAvailablePhoneNumbersIterable(this, searchAvailablePhoneNumbersRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #searchAvailablePhoneNumbers(software.amazon.awssdk.services.connect.model.SearchAvailablePhoneNumbersRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchAvailablePhoneNumbersIterable responses = client.searchAvailablePhoneNumbersPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchAvailablePhoneNumbersIterable responses = client
     *             .searchAvailablePhoneNumbersPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchAvailablePhoneNumbersResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchAvailablePhoneNumbersIterable responses = client.searchAvailablePhoneNumbersPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchAvailablePhoneNumbers(software.amazon.awssdk.services.connect.model.SearchAvailablePhoneNumbersRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchAvailablePhoneNumbersRequest.Builder}
     * avoiding the need to create one manually via {@link SearchAvailablePhoneNumbersRequest#builder()}
     * 
     *
     * @param searchAvailablePhoneNumbersRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchAvailablePhoneNumbersRequest.Builder} to create
     *        a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchAvailablePhoneNumbers
     * @see AWS API Documentation
     */
    default SearchAvailablePhoneNumbersIterable searchAvailablePhoneNumbersPaginator(
            Consumer searchAvailablePhoneNumbersRequest)
            throws InvalidParameterException, ThrottlingException, InternalServiceException, AccessDeniedException,
            AwsServiceException, SdkClientException, ConnectException {
        return searchAvailablePhoneNumbersPaginator(SearchAvailablePhoneNumbersRequest.builder()
                .applyMutation(searchAvailablePhoneNumbersRequest).build());
    }

    /**
     * 
     * Searches the flow modules in an Amazon Connect instance, with optional filtering.
     * 
     *
     * @param searchContactFlowModulesRequest
     * @return Result of the SearchContactFlowModules operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchContactFlowModules
     * @see AWS API Documentation
     */
    default SearchContactFlowModulesResponse searchContactFlowModules(
            SearchContactFlowModulesRequest searchContactFlowModulesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Searches the flow modules in an Amazon Connect instance, with optional filtering.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchContactFlowModulesRequest.Builder} avoiding
     * the need to create one manually via {@link SearchContactFlowModulesRequest#builder()}
     * 
     *
     * @param searchContactFlowModulesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchContactFlowModulesRequest.Builder} to create a
     *        request.
     * @return Result of the SearchContactFlowModules operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchContactFlowModules
     * @see AWS API Documentation
     */
    default SearchContactFlowModulesResponse searchContactFlowModules(
            Consumer searchContactFlowModulesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return searchContactFlowModules(SearchContactFlowModulesRequest.builder().applyMutation(searchContactFlowModulesRequest)
                .build());
    }

    /**
     * 
     * This is a variant of
     * {@link #searchContactFlowModules(software.amazon.awssdk.services.connect.model.SearchContactFlowModulesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchContactFlowModulesIterable responses = client.searchContactFlowModulesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchContactFlowModulesIterable responses = client
     *             .searchContactFlowModulesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchContactFlowModulesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchContactFlowModulesIterable responses = client.searchContactFlowModulesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchContactFlowModules(software.amazon.awssdk.services.connect.model.SearchContactFlowModulesRequest)}
     * operation.
     * 
     *
     * @param searchContactFlowModulesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchContactFlowModules
     * @see AWS API Documentation
     */
    default SearchContactFlowModulesIterable searchContactFlowModulesPaginator(
            SearchContactFlowModulesRequest searchContactFlowModulesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return new SearchContactFlowModulesIterable(this, searchContactFlowModulesRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #searchContactFlowModules(software.amazon.awssdk.services.connect.model.SearchContactFlowModulesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchContactFlowModulesIterable responses = client.searchContactFlowModulesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchContactFlowModulesIterable responses = client
     *             .searchContactFlowModulesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchContactFlowModulesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchContactFlowModulesIterable responses = client.searchContactFlowModulesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchContactFlowModules(software.amazon.awssdk.services.connect.model.SearchContactFlowModulesRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchContactFlowModulesRequest.Builder} avoiding
     * the need to create one manually via {@link SearchContactFlowModulesRequest#builder()}
     * 
     *
     * @param searchContactFlowModulesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchContactFlowModulesRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchContactFlowModules
     * @see AWS API Documentation
     */
    default SearchContactFlowModulesIterable searchContactFlowModulesPaginator(
            Consumer searchContactFlowModulesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return searchContactFlowModulesPaginator(SearchContactFlowModulesRequest.builder()
                .applyMutation(searchContactFlowModulesRequest).build());
    }

    /**
     * 
     * Searches the contact flows in an Amazon Connect instance, with optional filtering.
     * 
     *
     * @param searchContactFlowsRequest
     * @return Result of the SearchContactFlows operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchContactFlows
     * @see AWS
     *      API Documentation
     */
    default SearchContactFlowsResponse searchContactFlows(SearchContactFlowsRequest searchContactFlowsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Searches the contact flows in an Amazon Connect instance, with optional filtering.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchContactFlowsRequest.Builder} avoiding the
     * need to create one manually via {@link SearchContactFlowsRequest#builder()}
     * 
     *
     * @param searchContactFlowsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchContactFlowsRequest.Builder} to create a
     *        request.
     * @return Result of the SearchContactFlows operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchContactFlows
     * @see AWS
     *      API Documentation
     */
    default SearchContactFlowsResponse searchContactFlows(Consumer searchContactFlowsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return searchContactFlows(SearchContactFlowsRequest.builder().applyMutation(searchContactFlowsRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #searchContactFlows(software.amazon.awssdk.services.connect.model.SearchContactFlowsRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchContactFlowsIterable responses = client.searchContactFlowsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchContactFlowsIterable responses = client
     *             .searchContactFlowsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchContactFlowsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchContactFlowsIterable responses = client.searchContactFlowsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchContactFlows(software.amazon.awssdk.services.connect.model.SearchContactFlowsRequest)}
     * operation.
     * 
     *
     * @param searchContactFlowsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchContactFlows
     * @see AWS
     *      API Documentation
     */
    default SearchContactFlowsIterable searchContactFlowsPaginator(SearchContactFlowsRequest searchContactFlowsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return new SearchContactFlowsIterable(this, searchContactFlowsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #searchContactFlows(software.amazon.awssdk.services.connect.model.SearchContactFlowsRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchContactFlowsIterable responses = client.searchContactFlowsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchContactFlowsIterable responses = client
     *             .searchContactFlowsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchContactFlowsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchContactFlowsIterable responses = client.searchContactFlowsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchContactFlows(software.amazon.awssdk.services.connect.model.SearchContactFlowsRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchContactFlowsRequest.Builder} avoiding the
     * need to create one manually via {@link SearchContactFlowsRequest#builder()}
     * 
     *
     * @param searchContactFlowsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchContactFlowsRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchContactFlows
     * @see AWS
     *      API Documentation
     */
    default SearchContactFlowsIterable searchContactFlowsPaginator(
            Consumer searchContactFlowsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return searchContactFlowsPaginator(SearchContactFlowsRequest.builder().applyMutation(searchContactFlowsRequest).build());
    }

    /**
     * 
     * Searches contacts in an Amazon Connect instance.
     * 
     *
     * @param searchContactsRequest
     * @return Result of the SearchContacts operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchContacts
     * @see AWS API
     *      Documentation
     */
    default SearchContactsResponse searchContacts(SearchContactsRequest searchContactsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, InternalServiceException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Searches contacts in an Amazon Connect instance.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchContactsRequest.Builder} avoiding the need to
     * create one manually via {@link SearchContactsRequest#builder()}
     * 
     *
     * @param searchContactsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchContactsRequest.Builder} to create a request.
     * @return Result of the SearchContacts operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchContacts
     * @see AWS API
     *      Documentation
     */
    default SearchContactsResponse searchContacts(Consumer searchContactsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return searchContacts(SearchContactsRequest.builder().applyMutation(searchContactsRequest).build());
    }

    /**
     * 
     * This is a variant of {@link #searchContacts(software.amazon.awssdk.services.connect.model.SearchContactsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchContactsIterable responses = client.searchContactsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchContactsIterable responses = client.searchContactsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchContactsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchContactsIterable responses = client.searchContactsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchContacts(software.amazon.awssdk.services.connect.model.SearchContactsRequest)} operation.
     * 
     *
     * @param searchContactsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchContacts
     * @see AWS API
     *      Documentation
     */
    default SearchContactsIterable searchContactsPaginator(SearchContactsRequest searchContactsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return new SearchContactsIterable(this, searchContactsRequest);
    }

    /**
     * 
     * This is a variant of {@link #searchContacts(software.amazon.awssdk.services.connect.model.SearchContactsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchContactsIterable responses = client.searchContactsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchContactsIterable responses = client.searchContactsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchContactsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchContactsIterable responses = client.searchContactsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchContacts(software.amazon.awssdk.services.connect.model.SearchContactsRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchContactsRequest.Builder} avoiding the need to
     * create one manually via {@link SearchContactsRequest#builder()}
     * 
     *
     * @param searchContactsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchContactsRequest.Builder} to create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchContacts
     * @see AWS API
     *      Documentation
     */
    default SearchContactsIterable searchContactsPaginator(Consumer searchContactsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return searchContactsPaginator(SearchContactsRequest.builder().applyMutation(searchContactsRequest).build());
    }

    /**
     * 
     * Searches the hours of operation in an Amazon Connect instance, with optional filtering.
     * 
     *
     * @param searchHoursOfOperationsRequest
     * @return Result of the SearchHoursOfOperations operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchHoursOfOperations
     * @see AWS API Documentation
     */
    default SearchHoursOfOperationsResponse searchHoursOfOperations(SearchHoursOfOperationsRequest searchHoursOfOperationsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Searches the hours of operation in an Amazon Connect instance, with optional filtering.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchHoursOfOperationsRequest.Builder} avoiding
     * the need to create one manually via {@link SearchHoursOfOperationsRequest#builder()}
     * 
     *
     * @param searchHoursOfOperationsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchHoursOfOperationsRequest.Builder} to create a
     *        request.
     * @return Result of the SearchHoursOfOperations operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchHoursOfOperations
     * @see AWS API Documentation
     */
    default SearchHoursOfOperationsResponse searchHoursOfOperations(
            Consumer searchHoursOfOperationsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return searchHoursOfOperations(SearchHoursOfOperationsRequest.builder().applyMutation(searchHoursOfOperationsRequest)
                .build());
    }

    /**
     * 
     * This is a variant of
     * {@link #searchHoursOfOperations(software.amazon.awssdk.services.connect.model.SearchHoursOfOperationsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchHoursOfOperationsIterable responses = client.searchHoursOfOperationsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchHoursOfOperationsIterable responses = client
     *             .searchHoursOfOperationsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchHoursOfOperationsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchHoursOfOperationsIterable responses = client.searchHoursOfOperationsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchHoursOfOperations(software.amazon.awssdk.services.connect.model.SearchHoursOfOperationsRequest)}
     * operation.
     * 
     *
     * @param searchHoursOfOperationsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchHoursOfOperations
     * @see AWS API Documentation
     */
    default SearchHoursOfOperationsIterable searchHoursOfOperationsPaginator(
            SearchHoursOfOperationsRequest searchHoursOfOperationsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return new SearchHoursOfOperationsIterable(this, searchHoursOfOperationsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #searchHoursOfOperations(software.amazon.awssdk.services.connect.model.SearchHoursOfOperationsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchHoursOfOperationsIterable responses = client.searchHoursOfOperationsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchHoursOfOperationsIterable responses = client
     *             .searchHoursOfOperationsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchHoursOfOperationsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchHoursOfOperationsIterable responses = client.searchHoursOfOperationsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchHoursOfOperations(software.amazon.awssdk.services.connect.model.SearchHoursOfOperationsRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchHoursOfOperationsRequest.Builder} avoiding
     * the need to create one manually via {@link SearchHoursOfOperationsRequest#builder()}
     * 
     *
     * @param searchHoursOfOperationsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchHoursOfOperationsRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchHoursOfOperations
     * @see AWS API Documentation
     */
    default SearchHoursOfOperationsIterable searchHoursOfOperationsPaginator(
            Consumer searchHoursOfOperationsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return searchHoursOfOperationsPaginator(SearchHoursOfOperationsRequest.builder()
                .applyMutation(searchHoursOfOperationsRequest).build());
    }

    /**
     * 
     * Searches predefined attributes that meet certain criteria. Predefined attributes are attributes in an
     * Amazon Connect instance that can be used to route contacts to an agent or pools of agents within a queue. For
     * more information, see Create predefined
     * attributes for routing contacts to agents.
     * 
     *
     * @param searchPredefinedAttributesRequest
     * @return Result of the SearchPredefinedAttributes operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchPredefinedAttributes
     * @see AWS API Documentation
     */
    default SearchPredefinedAttributesResponse searchPredefinedAttributes(
            SearchPredefinedAttributesRequest searchPredefinedAttributesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Searches predefined attributes that meet certain criteria. Predefined attributes are attributes in an
     * Amazon Connect instance that can be used to route contacts to an agent or pools of agents within a queue. For
     * more information, see Create predefined
     * attributes for routing contacts to agents.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchPredefinedAttributesRequest.Builder} avoiding
     * the need to create one manually via {@link SearchPredefinedAttributesRequest#builder()}
     * 
     *
     * @param searchPredefinedAttributesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchPredefinedAttributesRequest.Builder} to create
     *        a request.
     * @return Result of the SearchPredefinedAttributes operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchPredefinedAttributes
     * @see AWS API Documentation
     */
    default SearchPredefinedAttributesResponse searchPredefinedAttributes(
            Consumer searchPredefinedAttributesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return searchPredefinedAttributes(SearchPredefinedAttributesRequest.builder()
                .applyMutation(searchPredefinedAttributesRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #searchPredefinedAttributes(software.amazon.awssdk.services.connect.model.SearchPredefinedAttributesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchPredefinedAttributesIterable responses = client.searchPredefinedAttributesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchPredefinedAttributesIterable responses = client
     *             .searchPredefinedAttributesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchPredefinedAttributesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchPredefinedAttributesIterable responses = client.searchPredefinedAttributesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchPredefinedAttributes(software.amazon.awssdk.services.connect.model.SearchPredefinedAttributesRequest)}
     * operation.
     * 
     *
     * @param searchPredefinedAttributesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchPredefinedAttributes
     * @see AWS API Documentation
     */
    default SearchPredefinedAttributesIterable searchPredefinedAttributesPaginator(
            SearchPredefinedAttributesRequest searchPredefinedAttributesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return new SearchPredefinedAttributesIterable(this, searchPredefinedAttributesRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #searchPredefinedAttributes(software.amazon.awssdk.services.connect.model.SearchPredefinedAttributesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchPredefinedAttributesIterable responses = client.searchPredefinedAttributesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchPredefinedAttributesIterable responses = client
     *             .searchPredefinedAttributesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchPredefinedAttributesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchPredefinedAttributesIterable responses = client.searchPredefinedAttributesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchPredefinedAttributes(software.amazon.awssdk.services.connect.model.SearchPredefinedAttributesRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchPredefinedAttributesRequest.Builder} avoiding
     * the need to create one manually via {@link SearchPredefinedAttributesRequest#builder()}
     * 
     *
     * @param searchPredefinedAttributesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchPredefinedAttributesRequest.Builder} to create
     *        a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchPredefinedAttributes
     * @see AWS API Documentation
     */
    default SearchPredefinedAttributesIterable searchPredefinedAttributesPaginator(
            Consumer searchPredefinedAttributesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return searchPredefinedAttributesPaginator(SearchPredefinedAttributesRequest.builder()
                .applyMutation(searchPredefinedAttributesRequest).build());
    }

    /**
     * 
     * Searches prompts in an Amazon Connect instance, with optional filtering.
     * 
     *
     * @param searchPromptsRequest
     * @return Result of the SearchPrompts operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchPrompts
     * @see AWS API
     *      Documentation
     */
    default SearchPromptsResponse searchPrompts(SearchPromptsRequest searchPromptsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Searches prompts in an Amazon Connect instance, with optional filtering.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchPromptsRequest.Builder} avoiding the need to
     * create one manually via {@link SearchPromptsRequest#builder()}
     * 
     *
     * @param searchPromptsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchPromptsRequest.Builder} to create a request.
     * @return Result of the SearchPrompts operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchPrompts
     * @see AWS API
     *      Documentation
     */
    default SearchPromptsResponse searchPrompts(Consumer searchPromptsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return searchPrompts(SearchPromptsRequest.builder().applyMutation(searchPromptsRequest).build());
    }

    /**
     * 
     * This is a variant of {@link #searchPrompts(software.amazon.awssdk.services.connect.model.SearchPromptsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchPromptsIterable responses = client.searchPromptsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchPromptsIterable responses = client.searchPromptsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchPromptsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchPromptsIterable responses = client.searchPromptsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchPrompts(software.amazon.awssdk.services.connect.model.SearchPromptsRequest)} operation.
     * 
     *
     * @param searchPromptsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchPrompts
     * @see AWS API
     *      Documentation
     */
    default SearchPromptsIterable searchPromptsPaginator(SearchPromptsRequest searchPromptsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return new SearchPromptsIterable(this, searchPromptsRequest);
    }

    /**
     * 
     * This is a variant of {@link #searchPrompts(software.amazon.awssdk.services.connect.model.SearchPromptsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchPromptsIterable responses = client.searchPromptsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchPromptsIterable responses = client.searchPromptsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchPromptsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchPromptsIterable responses = client.searchPromptsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchPrompts(software.amazon.awssdk.services.connect.model.SearchPromptsRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchPromptsRequest.Builder} avoiding the need to
     * create one manually via {@link SearchPromptsRequest#builder()}
     * 
     *
     * @param searchPromptsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchPromptsRequest.Builder} to create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchPrompts
     * @see AWS API
     *      Documentation
     */
    default SearchPromptsIterable searchPromptsPaginator(Consumer searchPromptsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return searchPromptsPaginator(SearchPromptsRequest.builder().applyMutation(searchPromptsRequest).build());
    }

    /**
     * 
     * Searches queues in an Amazon Connect instance, with optional filtering.
     * 
     *
     * @param searchQueuesRequest
     * @return Result of the SearchQueues operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchQueues
     * @see AWS API
     *      Documentation
     */
    default SearchQueuesResponse searchQueues(SearchQueuesRequest searchQueuesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Searches queues in an Amazon Connect instance, with optional filtering.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchQueuesRequest.Builder} avoiding the need to
     * create one manually via {@link SearchQueuesRequest#builder()}
     * 
     *
     * @param searchQueuesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchQueuesRequest.Builder} to create a request.
     * @return Result of the SearchQueues operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchQueues
     * @see AWS API
     *      Documentation
     */
    default SearchQueuesResponse searchQueues(Consumer searchQueuesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return searchQueues(SearchQueuesRequest.builder().applyMutation(searchQueuesRequest).build());
    }

    /**
     * 
     * This is a variant of {@link #searchQueues(software.amazon.awssdk.services.connect.model.SearchQueuesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchQueuesIterable responses = client.searchQueuesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchQueuesIterable responses = client.searchQueuesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchQueuesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchQueuesIterable responses = client.searchQueuesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchQueues(software.amazon.awssdk.services.connect.model.SearchQueuesRequest)} operation.
     * 
     *
     * @param searchQueuesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchQueues
     * @see AWS API
     *      Documentation
     */
    default SearchQueuesIterable searchQueuesPaginator(SearchQueuesRequest searchQueuesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return new SearchQueuesIterable(this, searchQueuesRequest);
    }

    /**
     * 
     * This is a variant of {@link #searchQueues(software.amazon.awssdk.services.connect.model.SearchQueuesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchQueuesIterable responses = client.searchQueuesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchQueuesIterable responses = client.searchQueuesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchQueuesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchQueuesIterable responses = client.searchQueuesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchQueues(software.amazon.awssdk.services.connect.model.SearchQueuesRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchQueuesRequest.Builder} avoiding the need to
     * create one manually via {@link SearchQueuesRequest#builder()}
     * 
     *
     * @param searchQueuesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchQueuesRequest.Builder} to create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchQueues
     * @see AWS API
     *      Documentation
     */
    default SearchQueuesIterable searchQueuesPaginator(Consumer searchQueuesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return searchQueuesPaginator(SearchQueuesRequest.builder().applyMutation(searchQueuesRequest).build());
    }

    /**
     * 
     * Searches quick connects in an Amazon Connect instance, with optional filtering.
     * 
     *
     * @param searchQuickConnectsRequest
     * @return Result of the SearchQuickConnects operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchQuickConnects
     * @see AWS
     *      API Documentation
     */
    default SearchQuickConnectsResponse searchQuickConnects(SearchQuickConnectsRequest searchQuickConnectsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Searches quick connects in an Amazon Connect instance, with optional filtering.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchQuickConnectsRequest.Builder} avoiding the
     * need to create one manually via {@link SearchQuickConnectsRequest#builder()}
     * 
     *
     * @param searchQuickConnectsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchQuickConnectsRequest.Builder} to create a
     *        request.
     * @return Result of the SearchQuickConnects operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchQuickConnects
     * @see AWS
     *      API Documentation
     */
    default SearchQuickConnectsResponse searchQuickConnects(
            Consumer searchQuickConnectsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return searchQuickConnects(SearchQuickConnectsRequest.builder().applyMutation(searchQuickConnectsRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #searchQuickConnects(software.amazon.awssdk.services.connect.model.SearchQuickConnectsRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchQuickConnectsIterable responses = client.searchQuickConnectsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchQuickConnectsIterable responses = client
     *             .searchQuickConnectsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchQuickConnectsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchQuickConnectsIterable responses = client.searchQuickConnectsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchQuickConnects(software.amazon.awssdk.services.connect.model.SearchQuickConnectsRequest)}
     * operation.
     * 
     *
     * @param searchQuickConnectsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchQuickConnects
     * @see AWS
     *      API Documentation
     */
    default SearchQuickConnectsIterable searchQuickConnectsPaginator(SearchQuickConnectsRequest searchQuickConnectsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return new SearchQuickConnectsIterable(this, searchQuickConnectsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #searchQuickConnects(software.amazon.awssdk.services.connect.model.SearchQuickConnectsRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchQuickConnectsIterable responses = client.searchQuickConnectsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchQuickConnectsIterable responses = client
     *             .searchQuickConnectsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchQuickConnectsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchQuickConnectsIterable responses = client.searchQuickConnectsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchQuickConnects(software.amazon.awssdk.services.connect.model.SearchQuickConnectsRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchQuickConnectsRequest.Builder} avoiding the
     * need to create one manually via {@link SearchQuickConnectsRequest#builder()}
     * 
     *
     * @param searchQuickConnectsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchQuickConnectsRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchQuickConnects
     * @see AWS
     *      API Documentation
     */
    default SearchQuickConnectsIterable searchQuickConnectsPaginator(
            Consumer searchQuickConnectsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return searchQuickConnectsPaginator(SearchQuickConnectsRequest.builder().applyMutation(searchQuickConnectsRequest)
                .build());
    }

    /**
     * 
     * Searches tags used in an Amazon Connect instance using optional search criteria.
     * 
     *
     * @param searchResourceTagsRequest
     * @return Result of the SearchResourceTags operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws MaximumResultReturnedException
     *         Maximum number (1000) of tags have been returned with current request. Consider changing request
     *         parameters to get more tags.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchResourceTags
     * @see AWS
     *      API Documentation
     */
    default SearchResourceTagsResponse searchResourceTags(SearchResourceTagsRequest searchResourceTagsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, MaximumResultReturnedException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Searches tags used in an Amazon Connect instance using optional search criteria.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchResourceTagsRequest.Builder} avoiding the
     * need to create one manually via {@link SearchResourceTagsRequest#builder()}
     * 
     *
     * @param searchResourceTagsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchResourceTagsRequest.Builder} to create a
     *        request.
     * @return Result of the SearchResourceTags operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws MaximumResultReturnedException
     *         Maximum number (1000) of tags have been returned with current request. Consider changing request
     *         parameters to get more tags.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchResourceTags
     * @see AWS
     *      API Documentation
     */
    default SearchResourceTagsResponse searchResourceTags(Consumer searchResourceTagsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, MaximumResultReturnedException, AwsServiceException, SdkClientException, ConnectException {
        return searchResourceTags(SearchResourceTagsRequest.builder().applyMutation(searchResourceTagsRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #searchResourceTags(software.amazon.awssdk.services.connect.model.SearchResourceTagsRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchResourceTagsIterable responses = client.searchResourceTagsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchResourceTagsIterable responses = client
     *             .searchResourceTagsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchResourceTagsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchResourceTagsIterable responses = client.searchResourceTagsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchResourceTags(software.amazon.awssdk.services.connect.model.SearchResourceTagsRequest)}
     * operation.
     * 
     *
     * @param searchResourceTagsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws MaximumResultReturnedException
     *         Maximum number (1000) of tags have been returned with current request. Consider changing request
     *         parameters to get more tags.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchResourceTags
     * @see AWS
     *      API Documentation
     */
    default SearchResourceTagsIterable searchResourceTagsPaginator(SearchResourceTagsRequest searchResourceTagsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, MaximumResultReturnedException, AwsServiceException, SdkClientException, ConnectException {
        return new SearchResourceTagsIterable(this, searchResourceTagsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #searchResourceTags(software.amazon.awssdk.services.connect.model.SearchResourceTagsRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchResourceTagsIterable responses = client.searchResourceTagsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchResourceTagsIterable responses = client
     *             .searchResourceTagsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchResourceTagsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchResourceTagsIterable responses = client.searchResourceTagsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchResourceTags(software.amazon.awssdk.services.connect.model.SearchResourceTagsRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchResourceTagsRequest.Builder} avoiding the
     * need to create one manually via {@link SearchResourceTagsRequest#builder()}
     * 
     *
     * @param searchResourceTagsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchResourceTagsRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws MaximumResultReturnedException
     *         Maximum number (1000) of tags have been returned with current request. Consider changing request
     *         parameters to get more tags.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchResourceTags
     * @see AWS
     *      API Documentation
     */
    default SearchResourceTagsIterable searchResourceTagsPaginator(
            Consumer searchResourceTagsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            MaximumResultReturnedException, AwsServiceException, SdkClientException, ConnectException {
        return searchResourceTagsPaginator(SearchResourceTagsRequest.builder().applyMutation(searchResourceTagsRequest).build());
    }

    /**
     * 
     * Searches routing profiles in an Amazon Connect instance, with optional filtering.
     * 
     *
     * @param searchRoutingProfilesRequest
     * @return Result of the SearchRoutingProfiles operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchRoutingProfiles
     * @see AWS
     *      API Documentation
     */
    default SearchRoutingProfilesResponse searchRoutingProfiles(SearchRoutingProfilesRequest searchRoutingProfilesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Searches routing profiles in an Amazon Connect instance, with optional filtering.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchRoutingProfilesRequest.Builder} avoiding the
     * need to create one manually via {@link SearchRoutingProfilesRequest#builder()}
     * 
     *
     * @param searchRoutingProfilesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchRoutingProfilesRequest.Builder} to create a
     *        request.
     * @return Result of the SearchRoutingProfiles operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchRoutingProfiles
     * @see AWS
     *      API Documentation
     */
    default SearchRoutingProfilesResponse searchRoutingProfiles(
            Consumer searchRoutingProfilesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return searchRoutingProfiles(SearchRoutingProfilesRequest.builder().applyMutation(searchRoutingProfilesRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #searchRoutingProfiles(software.amazon.awssdk.services.connect.model.SearchRoutingProfilesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchRoutingProfilesIterable responses = client.searchRoutingProfilesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchRoutingProfilesIterable responses = client
     *             .searchRoutingProfilesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchRoutingProfilesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchRoutingProfilesIterable responses = client.searchRoutingProfilesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchRoutingProfiles(software.amazon.awssdk.services.connect.model.SearchRoutingProfilesRequest)}
     * operation.
     * 
     *
     * @param searchRoutingProfilesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchRoutingProfiles
     * @see AWS
     *      API Documentation
     */
    default SearchRoutingProfilesIterable searchRoutingProfilesPaginator(SearchRoutingProfilesRequest searchRoutingProfilesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return new SearchRoutingProfilesIterable(this, searchRoutingProfilesRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #searchRoutingProfiles(software.amazon.awssdk.services.connect.model.SearchRoutingProfilesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchRoutingProfilesIterable responses = client.searchRoutingProfilesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchRoutingProfilesIterable responses = client
     *             .searchRoutingProfilesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchRoutingProfilesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchRoutingProfilesIterable responses = client.searchRoutingProfilesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchRoutingProfiles(software.amazon.awssdk.services.connect.model.SearchRoutingProfilesRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchRoutingProfilesRequest.Builder} avoiding the
     * need to create one manually via {@link SearchRoutingProfilesRequest#builder()}
     * 
     *
     * @param searchRoutingProfilesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchRoutingProfilesRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchRoutingProfiles
     * @see AWS
     *      API Documentation
     */
    default SearchRoutingProfilesIterable searchRoutingProfilesPaginator(
            Consumer searchRoutingProfilesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return searchRoutingProfilesPaginator(SearchRoutingProfilesRequest.builder().applyMutation(searchRoutingProfilesRequest)
                .build());
    }

    /**
     * 
     * Searches security profiles in an Amazon Connect instance, with optional filtering.
     * 
     * 
     * For information about security profiles, see Security Profiles
     * in the Amazon Connect Administrator Guide. For a mapping of the API name and user interface name of the
     * security profile permissions, see List of security profile
     * permissions.
     * 
     *
     * @param searchSecurityProfilesRequest
     * @return Result of the SearchSecurityProfiles operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchSecurityProfiles
     * @see AWS API Documentation
     */
    default SearchSecurityProfilesResponse searchSecurityProfiles(SearchSecurityProfilesRequest searchSecurityProfilesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Searches security profiles in an Amazon Connect instance, with optional filtering.
     * 
     * 
     * For information about security profiles, see Security Profiles
     * in the Amazon Connect Administrator Guide. For a mapping of the API name and user interface name of the
     * security profile permissions, see List of security profile
     * permissions.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchSecurityProfilesRequest.Builder} avoiding the
     * need to create one manually via {@link SearchSecurityProfilesRequest#builder()}
     * 
     *
     * @param searchSecurityProfilesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchSecurityProfilesRequest.Builder} to create a
     *        request.
     * @return Result of the SearchSecurityProfiles operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchSecurityProfiles
     * @see AWS API Documentation
     */
    default SearchSecurityProfilesResponse searchSecurityProfiles(
            Consumer searchSecurityProfilesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return searchSecurityProfiles(SearchSecurityProfilesRequest.builder().applyMutation(searchSecurityProfilesRequest)
                .build());
    }

    /**
     * 
     * This is a variant of
     * {@link #searchSecurityProfiles(software.amazon.awssdk.services.connect.model.SearchSecurityProfilesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchSecurityProfilesIterable responses = client.searchSecurityProfilesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchSecurityProfilesIterable responses = client
     *             .searchSecurityProfilesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchSecurityProfilesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchSecurityProfilesIterable responses = client.searchSecurityProfilesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchSecurityProfiles(software.amazon.awssdk.services.connect.model.SearchSecurityProfilesRequest)}
     * operation.
     * 
     *
     * @param searchSecurityProfilesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchSecurityProfiles
     * @see AWS API Documentation
     */
    default SearchSecurityProfilesIterable searchSecurityProfilesPaginator(
            SearchSecurityProfilesRequest searchSecurityProfilesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return new SearchSecurityProfilesIterable(this, searchSecurityProfilesRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #searchSecurityProfiles(software.amazon.awssdk.services.connect.model.SearchSecurityProfilesRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchSecurityProfilesIterable responses = client.searchSecurityProfilesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchSecurityProfilesIterable responses = client
     *             .searchSecurityProfilesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchSecurityProfilesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchSecurityProfilesIterable responses = client.searchSecurityProfilesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchSecurityProfiles(software.amazon.awssdk.services.connect.model.SearchSecurityProfilesRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchSecurityProfilesRequest.Builder} avoiding the
     * need to create one manually via {@link SearchSecurityProfilesRequest#builder()}
     * 
     *
     * @param searchSecurityProfilesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchSecurityProfilesRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchSecurityProfiles
     * @see AWS API Documentation
     */
    default SearchSecurityProfilesIterable searchSecurityProfilesPaginator(
            Consumer searchSecurityProfilesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return searchSecurityProfilesPaginator(SearchSecurityProfilesRequest.builder()
                .applyMutation(searchSecurityProfilesRequest).build());
    }

    /**
     * 
     * Searches UserHierarchyGroups in an Amazon Connect instance, with optional filtering.
     * 
     * 
     * 
     * The UserHierarchyGroup with "LevelId": "0" is the foundation for building levels on top of an
     * instance. It is not user-definable, nor is it visible in the UI.
     * 
     * 
     *
     * @param searchUserHierarchyGroupsRequest
     * @return Result of the SearchUserHierarchyGroups operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchUserHierarchyGroups
     * @see AWS API Documentation
     */
    default SearchUserHierarchyGroupsResponse searchUserHierarchyGroups(
            SearchUserHierarchyGroupsRequest searchUserHierarchyGroupsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Searches UserHierarchyGroups in an Amazon Connect instance, with optional filtering.
     * 
     * 
     * 
     * The UserHierarchyGroup with "LevelId": "0" is the foundation for building levels on top of an
     * instance. It is not user-definable, nor is it visible in the UI.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchUserHierarchyGroupsRequest.Builder} avoiding
     * the need to create one manually via {@link SearchUserHierarchyGroupsRequest#builder()}
     * 
     *
     * @param searchUserHierarchyGroupsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchUserHierarchyGroupsRequest.Builder} to create a
     *        request.
     * @return Result of the SearchUserHierarchyGroups operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchUserHierarchyGroups
     * @see AWS API Documentation
     */
    default SearchUserHierarchyGroupsResponse searchUserHierarchyGroups(
            Consumer searchUserHierarchyGroupsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return searchUserHierarchyGroups(SearchUserHierarchyGroupsRequest.builder()
                .applyMutation(searchUserHierarchyGroupsRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #searchUserHierarchyGroups(software.amazon.awssdk.services.connect.model.SearchUserHierarchyGroupsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchUserHierarchyGroupsIterable responses = client.searchUserHierarchyGroupsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchUserHierarchyGroupsIterable responses = client
     *             .searchUserHierarchyGroupsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchUserHierarchyGroupsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchUserHierarchyGroupsIterable responses = client.searchUserHierarchyGroupsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchUserHierarchyGroups(software.amazon.awssdk.services.connect.model.SearchUserHierarchyGroupsRequest)}
     * operation.
     * 
     *
     * @param searchUserHierarchyGroupsRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchUserHierarchyGroups
     * @see AWS API Documentation
     */
    default SearchUserHierarchyGroupsIterable searchUserHierarchyGroupsPaginator(
            SearchUserHierarchyGroupsRequest searchUserHierarchyGroupsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return new SearchUserHierarchyGroupsIterable(this, searchUserHierarchyGroupsRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #searchUserHierarchyGroups(software.amazon.awssdk.services.connect.model.SearchUserHierarchyGroupsRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchUserHierarchyGroupsIterable responses = client.searchUserHierarchyGroupsPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchUserHierarchyGroupsIterable responses = client
     *             .searchUserHierarchyGroupsPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchUserHierarchyGroupsResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchUserHierarchyGroupsIterable responses = client.searchUserHierarchyGroupsPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchUserHierarchyGroups(software.amazon.awssdk.services.connect.model.SearchUserHierarchyGroupsRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchUserHierarchyGroupsRequest.Builder} avoiding
     * the need to create one manually via {@link SearchUserHierarchyGroupsRequest#builder()}
     * 
     *
     * @param searchUserHierarchyGroupsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchUserHierarchyGroupsRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchUserHierarchyGroups
     * @see AWS API Documentation
     */
    default SearchUserHierarchyGroupsIterable searchUserHierarchyGroupsPaginator(
            Consumer searchUserHierarchyGroupsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return searchUserHierarchyGroupsPaginator(SearchUserHierarchyGroupsRequest.builder()
                .applyMutation(searchUserHierarchyGroupsRequest).build());
    }

    /**
     * 
     * Searches users in an Amazon Connect instance, with optional filtering.
     * 
     * 
     * 
     * AfterContactWorkTimeLimit is returned in milliseconds.
     * 
     * 
     *
     * @param searchUsersRequest
     * @return Result of the SearchUsers operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchUsers
     * @see AWS API
     *      Documentation
     */
    default SearchUsersResponse searchUsers(SearchUsersRequest searchUsersRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Searches users in an Amazon Connect instance, with optional filtering.
     * 
     * 
     * 
     * AfterContactWorkTimeLimit is returned in milliseconds.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchUsersRequest.Builder} avoiding the need to
     * create one manually via {@link SearchUsersRequest#builder()}
     * 
     *
     * @param searchUsersRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchUsersRequest.Builder} to create a request.
     * @return Result of the SearchUsers operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchUsers
     * @see AWS API
     *      Documentation
     */
    default SearchUsersResponse searchUsers(Consumer searchUsersRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return searchUsers(SearchUsersRequest.builder().applyMutation(searchUsersRequest).build());
    }

    /**
     * 
     * This is a variant of {@link #searchUsers(software.amazon.awssdk.services.connect.model.SearchUsersRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchUsersIterable responses = client.searchUsersPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchUsersIterable responses = client.searchUsersPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchUsersResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchUsersIterable responses = client.searchUsersPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchUsers(software.amazon.awssdk.services.connect.model.SearchUsersRequest)} operation.
     * 
     *
     * @param searchUsersRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchUsers
     * @see AWS API
     *      Documentation
     */
    default SearchUsersIterable searchUsersPaginator(SearchUsersRequest searchUsersRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return new SearchUsersIterable(this, searchUsersRequest);
    }

    /**
     * 
     * This is a variant of {@link #searchUsers(software.amazon.awssdk.services.connect.model.SearchUsersRequest)}
     * operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will
     * internally handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchUsersIterable responses = client.searchUsersPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchUsersIterable responses = client.searchUsersPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchUsersResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchUsersIterable responses = client.searchUsersPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchUsers(software.amazon.awssdk.services.connect.model.SearchUsersRequest)} operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchUsersRequest.Builder} avoiding the need to
     * create one manually via {@link SearchUsersRequest#builder()}
     * 
     *
     * @param searchUsersRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchUsersRequest.Builder} to create a request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchUsers
     * @see AWS API
     *      Documentation
     */
    default SearchUsersIterable searchUsersPaginator(Consumer searchUsersRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return searchUsersPaginator(SearchUsersRequest.builder().applyMutation(searchUsersRequest).build());
    }

    /**
     * 
     * Searches for vocabularies within a specific Amazon Connect instance using State,
     * NameStartsWith, and LanguageCode.
     * 
     *
     * @param searchVocabulariesRequest
     * @return Result of the SearchVocabularies operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchVocabularies
     * @see AWS
     *      API Documentation
     */
    default SearchVocabulariesResponse searchVocabularies(SearchVocabulariesRequest searchVocabulariesRequest)
            throws InvalidRequestException, InternalServiceException, ThrottlingException, AccessDeniedException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Searches for vocabularies within a specific Amazon Connect instance using State,
     * NameStartsWith, and LanguageCode.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchVocabulariesRequest.Builder} avoiding the
     * need to create one manually via {@link SearchVocabulariesRequest#builder()}
     * 
     *
     * @param searchVocabulariesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchVocabulariesRequest.Builder} to create a
     *        request.
     * @return Result of the SearchVocabularies operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchVocabularies
     * @see AWS
     *      API Documentation
     */
    default SearchVocabulariesResponse searchVocabularies(Consumer searchVocabulariesRequest)
            throws InvalidRequestException, InternalServiceException, ThrottlingException, AccessDeniedException,
            AwsServiceException, SdkClientException, ConnectException {
        return searchVocabularies(SearchVocabulariesRequest.builder().applyMutation(searchVocabulariesRequest).build());
    }

    /**
     * 
     * This is a variant of
     * {@link #searchVocabularies(software.amazon.awssdk.services.connect.model.SearchVocabulariesRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchVocabulariesIterable responses = client.searchVocabulariesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchVocabulariesIterable responses = client
     *             .searchVocabulariesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchVocabulariesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchVocabulariesIterable responses = client.searchVocabulariesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchVocabularies(software.amazon.awssdk.services.connect.model.SearchVocabulariesRequest)}
     * operation.
     * 
     *
     * @param searchVocabulariesRequest
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchVocabularies
     * @see AWS
     *      API Documentation
     */
    default SearchVocabulariesIterable searchVocabulariesPaginator(SearchVocabulariesRequest searchVocabulariesRequest)
            throws InvalidRequestException, InternalServiceException, ThrottlingException, AccessDeniedException,
            AwsServiceException, SdkClientException, ConnectException {
        return new SearchVocabulariesIterable(this, searchVocabulariesRequest);
    }

    /**
     * 
     * This is a variant of
     * {@link #searchVocabularies(software.amazon.awssdk.services.connect.model.SearchVocabulariesRequest)} operation.
     * The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally
     * handle making service calls for you.
     * 
     * 
     * When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no
     * guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response
     * pages by making service calls until there are no pages left or your iteration stops. If there are errors in your
     * request, you will see the failures only after you start iterating through the iterable.
     * 
     *
     * 
     * The following are few ways to iterate through the response pages:
     * 
     * 1) Using a Stream
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchVocabulariesIterable responses = client.searchVocabulariesPaginator(request);
     * responses.stream().forEach(....);
     * }
     * 
     *
     * 2) Using For loop
     * 
     *      * {
     *     @code
     *     software.amazon.awssdk.services.connect.paginators.SearchVocabulariesIterable responses = client
     *             .searchVocabulariesPaginator(request);
     *     for (software.amazon.awssdk.services.connect.model.SearchVocabulariesResponse response : responses) {
     *         // do something;
     *     }
     * }
     * 
     *
     * 3) Use iterator directly
     * 
     *      * {@code
     * software.amazon.awssdk.services.connect.paginators.SearchVocabulariesIterable responses = client.searchVocabulariesPaginator(request);
     * responses.iterator().forEachRemaining(....);
     * }
     * 
     * 
     * Please notice that the configuration of MaxResults won't limit the number of results you get with the
     * paginator. It only limits the number of results in each page.
     * 
     * 
     * Note: If you prefer to have control on service calls, use the
     * {@link #searchVocabularies(software.amazon.awssdk.services.connect.model.SearchVocabulariesRequest)}
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SearchVocabulariesRequest.Builder} avoiding the
     * need to create one manually via {@link SearchVocabulariesRequest#builder()}
     * 
     *
     * @param searchVocabulariesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SearchVocabulariesRequest.Builder} to create a
     *        request.
     * @return A custom iterable that can be used to iterate through all the response pages.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SearchVocabularies
     * @see AWS
     *      API Documentation
     */
    default SearchVocabulariesIterable searchVocabulariesPaginator(
            Consumer searchVocabulariesRequest) throws InvalidRequestException,
            InternalServiceException, ThrottlingException, AccessDeniedException, AwsServiceException, SdkClientException,
            ConnectException {
        return searchVocabulariesPaginator(SearchVocabulariesRequest.builder().applyMutation(searchVocabulariesRequest).build());
    }

    /**
     * 
     * Processes chat integration events from Amazon Web Services or external integrations to Amazon Connect. A chat
     * integration event includes:
     * 
     * 
     * 
     * 
     * SourceId, DestinationId, and Subtype: a set of identifiers, uniquely representing a chat
     * 
     * 
     * 
     * 
     * ChatEvent: details of the chat action to perform such as sending a message, event, or disconnecting from a chat
     * 
     * 
     * 
     * 
     * When a chat integration event is sent with chat identifiers that do not map to an active chat contact, a new chat
     * contact is also created before handling chat action.
     * 
     * 
     * Access to this API is currently restricted to Amazon Pinpoint for supporting SMS integration.
     * 
     *
     * @param sendChatIntegrationEventRequest
     * @return Result of the SendChatIntegrationEvent operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SendChatIntegrationEvent
     * @see AWS API Documentation
     */
    default SendChatIntegrationEventResponse sendChatIntegrationEvent(
            SendChatIntegrationEventRequest sendChatIntegrationEventRequest) throws InvalidRequestException,
            ResourceNotFoundException, InternalServiceException, ThrottlingException, AccessDeniedException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Processes chat integration events from Amazon Web Services or external integrations to Amazon Connect. A chat
     * integration event includes:
     * 
     * 
     * 
     * 
     * SourceId, DestinationId, and Subtype: a set of identifiers, uniquely representing a chat
     * 
     * 
     * 
     * 
     * ChatEvent: details of the chat action to perform such as sending a message, event, or disconnecting from a chat
     * 
     * 
     * 
     * 
     * When a chat integration event is sent with chat identifiers that do not map to an active chat contact, a new chat
     * contact is also created before handling chat action.
     * 
     * 
     * Access to this API is currently restricted to Amazon Pinpoint for supporting SMS integration.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SendChatIntegrationEventRequest.Builder} avoiding
     * the need to create one manually via {@link SendChatIntegrationEventRequest#builder()}
     * 
     *
     * @param sendChatIntegrationEventRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SendChatIntegrationEventRequest.Builder} to create a
     *        request.
     * @return Result of the SendChatIntegrationEvent operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SendChatIntegrationEvent
     * @see AWS API Documentation
     */
    default SendChatIntegrationEventResponse sendChatIntegrationEvent(
            Consumer sendChatIntegrationEventRequest) throws InvalidRequestException,
            ResourceNotFoundException, InternalServiceException, ThrottlingException, AccessDeniedException, AwsServiceException,
            SdkClientException, ConnectException {
        return sendChatIntegrationEvent(SendChatIntegrationEventRequest.builder().applyMutation(sendChatIntegrationEventRequest)
                .build());
    }

    /**
     * 
     * Provides a pre-signed Amazon S3 URL in response for uploading your content.
     * 
     * 
     * 
     * You may only use this API to upload attachments to an Amazon Connect
     * Case.
     * 
     * 
     *
     * @param startAttachedFileUploadRequest
     * @return Result of the StartAttachedFileUpload operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StartAttachedFileUpload
     * @see AWS API Documentation
     */
    default StartAttachedFileUploadResponse startAttachedFileUpload(StartAttachedFileUploadRequest startAttachedFileUploadRequest)
            throws AccessDeniedException, InvalidRequestException, InternalServiceException, ThrottlingException,
            ResourceConflictException, ServiceQuotaExceededException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Provides a pre-signed Amazon S3 URL in response for uploading your content.
     * 
     * 
     * 
     * You may only use this API to upload attachments to an Amazon Connect
     * Case.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link StartAttachedFileUploadRequest.Builder} avoiding
     * the need to create one manually via {@link StartAttachedFileUploadRequest#builder()}
     * 
     *
     * @param startAttachedFileUploadRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.StartAttachedFileUploadRequest.Builder} to create a
     *        request.
     * @return Result of the StartAttachedFileUpload operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StartAttachedFileUpload
     * @see AWS API Documentation
     */
    default StartAttachedFileUploadResponse startAttachedFileUpload(
            Consumer startAttachedFileUploadRequest) throws AccessDeniedException,
            InvalidRequestException, InternalServiceException, ThrottlingException, ResourceConflictException,
            ServiceQuotaExceededException, AwsServiceException, SdkClientException, ConnectException {
        return startAttachedFileUpload(StartAttachedFileUploadRequest.builder().applyMutation(startAttachedFileUploadRequest)
                .build());
    }

    /**
     * 
     * Initiates a flow to start a new chat for the customer. Response of this API provides a token required to obtain
     * credentials from the CreateParticipantConnection API in the Amazon Connect Participant Service.
     * 
     * 
     * When a new chat contact is successfully created, clients must subscribe to the participant’s connection for the
     * created chat within 5 minutes. This is achieved by invoking CreateParticipantConnection with WEBSOCKET and CONNECTION_CREDENTIALS.
     * 
     * 
     * A 429 error occurs in the following situations:
     * 
     * 
     * 
     * 
     * API rate limit is exceeded. API TPS throttling returns a TooManyRequests exception.
     * 
     * 
     * 
     * 
     * The quota for
     * concurrent active chats is exceeded. Active chat throttling returns a LimitExceededException.
     * 
     * 
     * 
     * 
     * If you use the ChatDurationInMinutes parameter and receive a 400 error, your account may not support
     * the ability to configure custom chat durations. For more information, contact Amazon Web Services Support.
     * 
     * 
     * For more information about chat, see the following topics in the Amazon Connect Administrator Guide:
     * 
     * 
     * 
     * 
     * Concepts: Web and mobile
     * messaging capabilities in Amazon Connect
     * 
     * 
     * 
     * 
     * 
     * Amazon Connect Chat security best practices
     * 
     * 
     * 
     *
     * @param startChatContactRequest
     * @return Result of the StartChatContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StartChatContact
     * @see AWS API
     *      Documentation
     */
    default StartChatContactResponse startChatContact(StartChatContactRequest startChatContactRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            LimitExceededException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Initiates a flow to start a new chat for the customer. Response of this API provides a token required to obtain
     * credentials from the CreateParticipantConnection API in the Amazon Connect Participant Service.
     * 
     * 
     * When a new chat contact is successfully created, clients must subscribe to the participant’s connection for the
     * created chat within 5 minutes. This is achieved by invoking CreateParticipantConnection with WEBSOCKET and CONNECTION_CREDENTIALS.
     * 
     * 
     * A 429 error occurs in the following situations:
     * 
     * 
     * 
     * 
     * API rate limit is exceeded. API TPS throttling returns a TooManyRequests exception.
     * 
     * 
     * 
     * 
     * The quota for
     * concurrent active chats is exceeded. Active chat throttling returns a LimitExceededException.
     * 
     * 
     * 
     * 
     * If you use the ChatDurationInMinutes parameter and receive a 400 error, your account may not support
     * the ability to configure custom chat durations. For more information, contact Amazon Web Services Support.
     * 
     * 
     * For more information about chat, see the following topics in the Amazon Connect Administrator Guide:
     * 
     * 
     * 
     * 
     * Concepts: Web and mobile
     * messaging capabilities in Amazon Connect
     * 
     * 
     * 
     * 
     * 
     * Amazon Connect Chat security best practices
     * 
     * 
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link StartChatContactRequest.Builder} avoiding the need
     * to create one manually via {@link StartChatContactRequest#builder()}
     * 
     *
     * @param startChatContactRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.StartChatContactRequest.Builder} to create a request.
     * @return Result of the StartChatContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StartChatContact
     * @see AWS API
     *      Documentation
     */
    default StartChatContactResponse startChatContact(Consumer startChatContactRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            LimitExceededException, AwsServiceException, SdkClientException, ConnectException {
        return startChatContact(StartChatContactRequest.builder().applyMutation(startChatContactRequest).build());
    }

    /**
     * 
     * Starts an empty evaluation in the specified Amazon Connect instance, using the given evaluation form for the
     * particular contact. The evaluation form version used for the contact evaluation corresponds to the currently
     * activated version. If no version is activated for the evaluation form, the contact evaluation cannot be started.
     * 
     * 
     * 
     * Evaluations created through the public API do not contain answer values suggested from automation.
     * 
     * 
     *
     * @param startContactEvaluationRequest
     * @return Result of the StartContactEvaluation operation returned by the service.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StartContactEvaluation
     * @see AWS API Documentation
     */
    default StartContactEvaluationResponse startContactEvaluation(StartContactEvaluationRequest startContactEvaluationRequest)
            throws InternalServiceException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            ServiceQuotaExceededException, ResourceConflictException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Starts an empty evaluation in the specified Amazon Connect instance, using the given evaluation form for the
     * particular contact. The evaluation form version used for the contact evaluation corresponds to the currently
     * activated version. If no version is activated for the evaluation form, the contact evaluation cannot be started.
     * 
     * 
     * 
     * Evaluations created through the public API do not contain answer values suggested from automation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link StartContactEvaluationRequest.Builder} avoiding the
     * need to create one manually via {@link StartContactEvaluationRequest#builder()}
     * 
     *
     * @param startContactEvaluationRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.StartContactEvaluationRequest.Builder} to create a
     *        request.
     * @return Result of the StartContactEvaluation operation returned by the service.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StartContactEvaluation
     * @see AWS API Documentation
     */
    default StartContactEvaluationResponse startContactEvaluation(
            Consumer startContactEvaluationRequest) throws InternalServiceException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, ServiceQuotaExceededException,
            ResourceConflictException, AwsServiceException, SdkClientException, ConnectException {
        return startContactEvaluation(StartContactEvaluationRequest.builder().applyMutation(startContactEvaluationRequest)
                .build());
    }

    /**
     * 
     * Starts recording the contact:
     * 
     * 
     * 
     * 
     * If the API is called before the agent joins the call, recording starts when the agent joins the call.
     * 
     * 
     * 
     * 
     * If the API is called after the agent joins the call, recording starts at the time of the API call.
     * 
     * 
     * 
     * 
     * StartContactRecording is a one-time action. For example, if you use StopContactRecording to stop recording an
     * ongoing call, you can't use StartContactRecording to restart it. For scenarios where the recording has started
     * and you want to suspend and resume it, such as when collecting sensitive information (for example, a credit card
     * number), use SuspendContactRecording and ResumeContactRecording.
     * 
     * 
     * You can use this API to override the recording behavior configured in the Set recording
     * behavior block.
     * 
     * 
     * Only voice recordings are supported at this time.
     * 
     *
     * @param startContactRecordingRequest
     * @return Result of the StartContactRecording operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StartContactRecording
     * @see AWS
     *      API Documentation
     */
    default StartContactRecordingResponse startContactRecording(StartContactRecordingRequest startContactRecordingRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Starts recording the contact:
     * 
     * 
     * 
     * 
     * If the API is called before the agent joins the call, recording starts when the agent joins the call.
     * 
     * 
     * 
     * 
     * If the API is called after the agent joins the call, recording starts at the time of the API call.
     * 
     * 
     * 
     * 
     * StartContactRecording is a one-time action. For example, if you use StopContactRecording to stop recording an
     * ongoing call, you can't use StartContactRecording to restart it. For scenarios where the recording has started
     * and you want to suspend and resume it, such as when collecting sensitive information (for example, a credit card
     * number), use SuspendContactRecording and ResumeContactRecording.
     * 
     * 
     * You can use this API to override the recording behavior configured in the Set recording
     * behavior block.
     * 
     * 
     * Only voice recordings are supported at this time.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link StartContactRecordingRequest.Builder} avoiding the
     * need to create one manually via {@link StartContactRecordingRequest#builder()}
     * 
     *
     * @param startContactRecordingRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.StartContactRecordingRequest.Builder} to create a
     *        request.
     * @return Result of the StartContactRecording operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StartContactRecording
     * @see AWS
     *      API Documentation
     */
    default StartContactRecordingResponse startContactRecording(
            Consumer startContactRecordingRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, InternalServiceException, AwsServiceException,
            SdkClientException, ConnectException {
        return startContactRecording(StartContactRecordingRequest.builder().applyMutation(startContactRecordingRequest).build());
    }

    /**
     * 
     * Initiates real-time message streaming for a new chat contact.
     * 
     * 
     * For more information about message streaming, see Enable real-time chat
     * message streaming in the Amazon Connect Administrator Guide.
     * 
     * 
     * For more information about chat, see the following topics in the Amazon Connect Administrator Guide:
     * 
     * 
     * 
     * 
     * Concepts: Web and mobile
     * messaging capabilities in Amazon Connect
     * 
     * 
     * 
     * 
     * 
     * Amazon Connect Chat security best practices
     * 
     * 
     * 
     *
     * @param startContactStreamingRequest
     * @return Result of the StartContactStreaming operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StartContactStreaming
     * @see AWS
     *      API Documentation
     */
    default StartContactStreamingResponse startContactStreaming(StartContactStreamingRequest startContactStreamingRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            LimitExceededException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Initiates real-time message streaming for a new chat contact.
     * 
     * 
     * For more information about message streaming, see Enable real-time chat
     * message streaming in the Amazon Connect Administrator Guide.
     * 
     * 
     * For more information about chat, see the following topics in the Amazon Connect Administrator Guide:
     * 
     * 
     * 
     * 
     * Concepts: Web and mobile
     * messaging capabilities in Amazon Connect
     * 
     * 
     * 
     * 
     * 
     * Amazon Connect Chat security best practices
     * 
     * 
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link StartContactStreamingRequest.Builder} avoiding the
     * need to create one manually via {@link StartContactStreamingRequest#builder()}
     * 
     *
     * @param startContactStreamingRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.StartContactStreamingRequest.Builder} to create a
     *        request.
     * @return Result of the StartContactStreaming operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StartContactStreaming
     * @see AWS
     *      API Documentation
     */
    default StartContactStreamingResponse startContactStreaming(
            Consumer startContactStreamingRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, InternalServiceException, LimitExceededException,
            AwsServiceException, SdkClientException, ConnectException {
        return startContactStreaming(StartContactStreamingRequest.builder().applyMutation(startContactStreamingRequest).build());
    }

    /**
     * 
     * Places an outbound call to a contact, and then initiates the flow. It performs the actions in the flow that's
     * specified (in ContactFlowId).
     * 
     * 
     * Agents do not initiate the outbound API, which means that they do not dial the contact. If the flow places an
     * outbound call to a contact, and then puts the contact in queue, the call is then routed to the agent, like any
     * other inbound case.
     * 
     * 
     * There is a 60-second dialing timeout for this operation. If the call is not connected after 60 seconds, it fails.
     * 
     * 
     * 
     * UK numbers with a 447 prefix are not allowed by default. Before you can dial these UK mobile numbers, you must
     * submit a service quota increase request. For more information, see Amazon Connect
     * Service Quotas in the Amazon Connect Administrator Guide.
     * 
     *  
     * 
     * Campaign calls are not allowed by default. Before you can make a call with TrafficType =
     * CAMPAIGN, you must submit a service quota increase request to the quota Amazon Connect campaigns.
     * 
     * 
     *
     * @param startOutboundVoiceContactRequest
     * @return Result of the StartOutboundVoiceContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws DestinationNotAllowedException
     *         Outbound calls to the destination number are not allowed.
     * @throws OutboundContactNotPermittedException
     *         The contact is not permitted.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StartOutboundVoiceContact
     * @see AWS API Documentation
     */
    default StartOutboundVoiceContactResponse startOutboundVoiceContact(
            StartOutboundVoiceContactRequest startOutboundVoiceContactRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, InternalServiceException, LimitExceededException,
            DestinationNotAllowedException, OutboundContactNotPermittedException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Places an outbound call to a contact, and then initiates the flow. It performs the actions in the flow that's
     * specified (in ContactFlowId).
     * 
     * 
     * Agents do not initiate the outbound API, which means that they do not dial the contact. If the flow places an
     * outbound call to a contact, and then puts the contact in queue, the call is then routed to the agent, like any
     * other inbound case.
     * 
     * 
     * There is a 60-second dialing timeout for this operation. If the call is not connected after 60 seconds, it fails.
     * 
     * 
     * 
     * UK numbers with a 447 prefix are not allowed by default. Before you can dial these UK mobile numbers, you must
     * submit a service quota increase request. For more information, see Amazon Connect
     * Service Quotas in the Amazon Connect Administrator Guide.
     * 
     *  
     * 
     * Campaign calls are not allowed by default. Before you can make a call with TrafficType =
     * CAMPAIGN, you must submit a service quota increase request to the quota Amazon Connect campaigns.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link StartOutboundVoiceContactRequest.Builder} avoiding
     * the need to create one manually via {@link StartOutboundVoiceContactRequest#builder()}
     * 
     *
     * @param startOutboundVoiceContactRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.StartOutboundVoiceContactRequest.Builder} to create a
     *        request.
     * @return Result of the StartOutboundVoiceContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws DestinationNotAllowedException
     *         Outbound calls to the destination number are not allowed.
     * @throws OutboundContactNotPermittedException
     *         The contact is not permitted.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StartOutboundVoiceContact
     * @see AWS API Documentation
     */
    default StartOutboundVoiceContactResponse startOutboundVoiceContact(
            Consumer startOutboundVoiceContactRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, InternalServiceException, LimitExceededException,
            DestinationNotAllowedException, OutboundContactNotPermittedException, AwsServiceException, SdkClientException,
            ConnectException {
        return startOutboundVoiceContact(StartOutboundVoiceContactRequest.builder()
                .applyMutation(startOutboundVoiceContactRequest).build());
    }

    /**
     * 
     * Initiates a flow to start a new task contact. For more information about task contacts, see Concepts: Tasks in Amazon Connect in
     * the Amazon Connect Administrator Guide.
     * 
     * 
     * When using PreviousContactId and RelatedContactId input parameters, note the following:
     * 
     * 
     * 
     * 
     * PreviousContactId
     * 
     * 
     * 
     * 
     * Any updates to user-defined task contact attributes on any contact linked through the same
     * PreviousContactId will affect every contact in the chain.
     * 
     * 
     * 
     * 
     * There can be a maximum of 12 linked task contacts in a chain. That is, 12 task contacts can be created that share
     * the same PreviousContactId.
     * 
     * 
     * 
     * 
     * 
     * 
     * RelatedContactId
     * 
     * 
     * 
     * 
     * Copies contact attributes from the related task contact to the new contact.
     * 
     * 
     * 
     * 
     * Any update on attributes in a new task contact does not update attributes on previous contact.
     * 
     * 
     * 
     * 
     * There’s no limit on the number of task contacts that can be created that use the same
     * RelatedContactId.
     * 
     * 
     * 
     * 
     * 
     * 
     * In addition, when calling StartTaskContact include only one of these parameters: ContactFlowID,
     * QuickConnectID, or TaskTemplateID. Only one parameter is required as long as the task
     * template has a flow configured to run it. If more than one parameter is specified, or only the
     * TaskTemplateID is specified but it does not have a flow configured, the request returns an error
     * because Amazon Connect cannot identify the unique flow to run when the task is created.
     * 
     * 
     * A ServiceQuotaExceededException occurs when the number of open tasks exceeds the active tasks quota
     * or there are already 12 tasks referencing the same PreviousContactId. For more information about
     * service quotas for task contacts, see Amazon Connect
     * service quotas in the Amazon Connect Administrator Guide.
     * 
     *
     * @param startTaskContactRequest
     * @return Result of the StartTaskContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StartTaskContact
     * @see AWS API
     *      Documentation
     */
    default StartTaskContactResponse startTaskContact(StartTaskContactRequest startTaskContactRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            ServiceQuotaExceededException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Initiates a flow to start a new task contact. For more information about task contacts, see Concepts: Tasks in Amazon Connect in
     * the Amazon Connect Administrator Guide.
     * 
     * 
     * When using PreviousContactId and RelatedContactId input parameters, note the following:
     * 
     * 
     * 
     * 
     * PreviousContactId
     * 
     * 
     * 
     * 
     * Any updates to user-defined task contact attributes on any contact linked through the same
     * PreviousContactId will affect every contact in the chain.
     * 
     * 
     * 
     * 
     * There can be a maximum of 12 linked task contacts in a chain. That is, 12 task contacts can be created that share
     * the same PreviousContactId.
     * 
     * 
     * 
     * 
     * 
     * 
     * RelatedContactId
     * 
     * 
     * 
     * 
     * Copies contact attributes from the related task contact to the new contact.
     * 
     * 
     * 
     * 
     * Any update on attributes in a new task contact does not update attributes on previous contact.
     * 
     * 
     * 
     * 
     * There’s no limit on the number of task contacts that can be created that use the same
     * RelatedContactId.
     * 
     * 
     * 
     * 
     * 
     * 
     * In addition, when calling StartTaskContact include only one of these parameters: ContactFlowID,
     * QuickConnectID, or TaskTemplateID. Only one parameter is required as long as the task
     * template has a flow configured to run it. If more than one parameter is specified, or only the
     * TaskTemplateID is specified but it does not have a flow configured, the request returns an error
     * because Amazon Connect cannot identify the unique flow to run when the task is created.
     * 
     * 
     * A ServiceQuotaExceededException occurs when the number of open tasks exceeds the active tasks quota
     * or there are already 12 tasks referencing the same PreviousContactId. For more information about
     * service quotas for task contacts, see Amazon Connect
     * service quotas in the Amazon Connect Administrator Guide.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link StartTaskContactRequest.Builder} avoiding the need
     * to create one manually via {@link StartTaskContactRequest#builder()}
     * 
     *
     * @param startTaskContactRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.StartTaskContactRequest.Builder} to create a request.
     * @return Result of the StartTaskContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StartTaskContact
     * @see AWS API
     *      Documentation
     */
    default StartTaskContactResponse startTaskContact(Consumer startTaskContactRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            ServiceQuotaExceededException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return startTaskContact(StartTaskContactRequest.builder().applyMutation(startTaskContactRequest).build());
    }

    /**
     * 
     * Places an inbound in-app, web, or video call to a contact, and then initiates the flow. It performs the actions
     * in the flow that are specified (in ContactFlowId) and present in the Amazon Connect instance (specified as
     * InstanceId).
     * 
     *
     * @param startWebRtcContactRequest
     * @return Result of the StartWebRTCContact operation returned by the service.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StartWebRTCContact
     * @see AWS
     *      API Documentation
     */
    default StartWebRtcContactResponse startWebRTCContact(StartWebRtcContactRequest startWebRtcContactRequest)
            throws InternalServiceException, InvalidRequestException, InvalidParameterException, LimitExceededException,
            ResourceNotFoundException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Places an inbound in-app, web, or video call to a contact, and then initiates the flow. It performs the actions
     * in the flow that are specified (in ContactFlowId) and present in the Amazon Connect instance (specified as
     * InstanceId).
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link StartWebRtcContactRequest.Builder} avoiding the
     * need to create one manually via {@link StartWebRtcContactRequest#builder()}
     * 
     *
     * @param startWebRtcContactRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.StartWebRtcContactRequest.Builder} to create a
     *        request.
     * @return Result of the StartWebRTCContact operation returned by the service.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StartWebRTCContact
     * @see AWS
     *      API Documentation
     */
    default StartWebRtcContactResponse startWebRTCContact(Consumer startWebRtcContactRequest)
            throws InternalServiceException, InvalidRequestException, InvalidParameterException, LimitExceededException,
            ResourceNotFoundException, AwsServiceException, SdkClientException, ConnectException {
        return startWebRTCContact(StartWebRtcContactRequest.builder().applyMutation(startWebRtcContactRequest).build());
    }

    /**
     * 
     * Ends the specified contact. Use this API to stop queued callbacks. It does not work for voice contacts that use
     * the following initiation methods:
     * 
     * 
     * 
     * 
     * DISCONNECT
     * 
     * 
     * 
     * 
     * TRANSFER
     * 
     * 
     * 
     * 
     * QUEUE_TRANSFER
     * 
     * 
     * 
     * 
     * EXTERNAL_OUTBOUND
     * 
     * 
     * 
     * 
     * MONITOR
     * 
     * 
     * 
     * 
     * Chat and task contacts can be terminated in any state, regardless of initiation method.
     * 
     *
     * @param stopContactRequest
     * @return Result of the StopContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ContactNotFoundException
     *         The contact with the specified ID is not active or does not exist. Applies to Voice calls only, not to
     *         Chat or Task contacts.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StopContact
     * @see AWS API
     *      Documentation
     */
    default StopContactResponse stopContact(StopContactRequest stopContactRequest) throws InvalidRequestException,
            ContactNotFoundException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Ends the specified contact. Use this API to stop queued callbacks. It does not work for voice contacts that use
     * the following initiation methods:
     * 
     * 
     * 
     * 
     * DISCONNECT
     * 
     * 
     * 
     * 
     * TRANSFER
     * 
     * 
     * 
     * 
     * QUEUE_TRANSFER
     * 
     * 
     * 
     * 
     * EXTERNAL_OUTBOUND
     * 
     * 
     * 
     * 
     * MONITOR
     * 
     * 
     * 
     * 
     * Chat and task contacts can be terminated in any state, regardless of initiation method.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link StopContactRequest.Builder} avoiding the need to
     * create one manually via {@link StopContactRequest#builder()}
     * 
     *
     * @param stopContactRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.StopContactRequest.Builder} to create a request.
     * @return Result of the StopContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ContactNotFoundException
     *         The contact with the specified ID is not active or does not exist. Applies to Voice calls only, not to
     *         Chat or Task contacts.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StopContact
     * @see AWS API
     *      Documentation
     */
    default StopContactResponse stopContact(Consumer stopContactRequest)
            throws InvalidRequestException, ContactNotFoundException, InvalidParameterException, ResourceNotFoundException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return stopContact(StopContactRequest.builder().applyMutation(stopContactRequest).build());
    }

    /**
     * 
     * Stops recording a call when a contact is being recorded. StopContactRecording is a one-time action. If you use
     * StopContactRecording to stop recording an ongoing call, you can't use StartContactRecording to restart it. For
     * scenarios where the recording has started and you want to suspend it for sensitive information (for example, to
     * collect a credit card number), and then restart it, use SuspendContactRecording and ResumeContactRecording.
     * 
     * 
     * Only voice recordings are supported at this time.
     * 
     *
     * @param stopContactRecordingRequest
     * @return Result of the StopContactRecording operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StopContactRecording
     * @see AWS
     *      API Documentation
     */
    default StopContactRecordingResponse stopContactRecording(StopContactRecordingRequest stopContactRecordingRequest)
            throws InvalidRequestException, ResourceNotFoundException, InternalServiceException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Stops recording a call when a contact is being recorded. StopContactRecording is a one-time action. If you use
     * StopContactRecording to stop recording an ongoing call, you can't use StartContactRecording to restart it. For
     * scenarios where the recording has started and you want to suspend it for sensitive information (for example, to
     * collect a credit card number), and then restart it, use SuspendContactRecording and ResumeContactRecording.
     * 
     * 
     * Only voice recordings are supported at this time.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link StopContactRecordingRequest.Builder} avoiding the
     * need to create one manually via {@link StopContactRecordingRequest#builder()}
     * 
     *
     * @param stopContactRecordingRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.StopContactRecordingRequest.Builder} to create a
     *        request.
     * @return Result of the StopContactRecording operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StopContactRecording
     * @see AWS
     *      API Documentation
     */
    default StopContactRecordingResponse stopContactRecording(
            Consumer stopContactRecordingRequest) throws InvalidRequestException,
            ResourceNotFoundException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return stopContactRecording(StopContactRecordingRequest.builder().applyMutation(stopContactRecordingRequest).build());
    }

    /**
     * 
     * Ends message streaming on a specified contact. To restart message streaming on that contact, call the StartContactStreaming API.
     * 
     *
     * @param stopContactStreamingRequest
     * @return Result of the StopContactStreaming operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StopContactStreaming
     * @see AWS
     *      API Documentation
     */
    default StopContactStreamingResponse stopContactStreaming(StopContactStreamingRequest stopContactStreamingRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Ends message streaming on a specified contact. To restart message streaming on that contact, call the StartContactStreaming API.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link StopContactStreamingRequest.Builder} avoiding the
     * need to create one manually via {@link StopContactStreamingRequest#builder()}
     * 
     *
     * @param stopContactStreamingRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.StopContactStreamingRequest.Builder} to create a
     *        request.
     * @return Result of the StopContactStreaming operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.StopContactStreaming
     * @see AWS
     *      API Documentation
     */
    default StopContactStreamingResponse stopContactStreaming(
            Consumer stopContactStreamingRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, InternalServiceException, AwsServiceException,
            SdkClientException, ConnectException {
        return stopContactStreaming(StopContactStreamingRequest.builder().applyMutation(stopContactStreamingRequest).build());
    }

    /**
     * 
     * Submits a contact evaluation in the specified Amazon Connect instance. Answers included in the request are merged
     * with existing answers for the given evaluation. If no answers or notes are passed, the evaluation is submitted
     * with the existing answers and notes. You can delete an answer or note by passing an empty object ({}
     * ) to the question identifier.
     * 
     * 
     * If a contact evaluation is already in submitted state, this operation will trigger a resubmission.
     * 
     *
     * @param submitContactEvaluationRequest
     * @return Result of the SubmitContactEvaluation operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SubmitContactEvaluation
     * @see AWS API Documentation
     */
    default SubmitContactEvaluationResponse submitContactEvaluation(SubmitContactEvaluationRequest submitContactEvaluationRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            ResourceConflictException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Submits a contact evaluation in the specified Amazon Connect instance. Answers included in the request are merged
     * with existing answers for the given evaluation. If no answers or notes are passed, the evaluation is submitted
     * with the existing answers and notes. You can delete an answer or note by passing an empty object ({}
     * ) to the question identifier.
     * 
     * 
     * If a contact evaluation is already in submitted state, this operation will trigger a resubmission.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SubmitContactEvaluationRequest.Builder} avoiding
     * the need to create one manually via {@link SubmitContactEvaluationRequest#builder()}
     * 
     *
     * @param submitContactEvaluationRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SubmitContactEvaluationRequest.Builder} to create a
     *        request.
     * @return Result of the SubmitContactEvaluation operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SubmitContactEvaluation
     * @see AWS API Documentation
     */
    default SubmitContactEvaluationResponse submitContactEvaluation(
            Consumer submitContactEvaluationRequest) throws InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, ResourceConflictException,
            AwsServiceException, SdkClientException, ConnectException {
        return submitContactEvaluation(SubmitContactEvaluationRequest.builder().applyMutation(submitContactEvaluationRequest)
                .build());
    }

    /**
     * 
     * When a contact is being recorded, this API suspends recording whatever is selected in the flow configuration:
     * call, screen, or both. If only call recording or only screen recording is enabled, then it would be suspended.
     * For example, you might suspend the screen recording while collecting sensitive information, such as a credit card
     * number. Then use ResumeContactRecording to restart recording the screen.
     * 
     * 
     * The period of time that the recording is suspended is filled with silence in the final recording.
     * 
     * 
     * Voice and screen recordings are supported.
     * 
     *
     * @param suspendContactRecordingRequest
     * @return Result of the SuspendContactRecording operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SuspendContactRecording
     * @see AWS API Documentation
     */
    default SuspendContactRecordingResponse suspendContactRecording(SuspendContactRecordingRequest suspendContactRecordingRequest)
            throws InvalidRequestException, ResourceNotFoundException, InternalServiceException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * When a contact is being recorded, this API suspends recording whatever is selected in the flow configuration:
     * call, screen, or both. If only call recording or only screen recording is enabled, then it would be suspended.
     * For example, you might suspend the screen recording while collecting sensitive information, such as a credit card
     * number. Then use ResumeContactRecording to restart recording the screen.
     * 
     * 
     * The period of time that the recording is suspended is filled with silence in the final recording.
     * 
     * 
     * Voice and screen recordings are supported.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link SuspendContactRecordingRequest.Builder} avoiding
     * the need to create one manually via {@link SuspendContactRecordingRequest#builder()}
     * 
     *
     * @param suspendContactRecordingRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.SuspendContactRecordingRequest.Builder} to create a
     *        request.
     * @return Result of the SuspendContactRecording operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.SuspendContactRecording
     * @see AWS API Documentation
     */
    default SuspendContactRecordingResponse suspendContactRecording(
            Consumer suspendContactRecordingRequest) throws InvalidRequestException,
            ResourceNotFoundException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return suspendContactRecording(SuspendContactRecordingRequest.builder().applyMutation(suspendContactRecordingRequest)
                .build());
    }

    /**
     * 
     * Adds the specified tags to the contact resource. For more information about this API is used, see Set up granular billing for a
     * detailed view of your Amazon Connect usage.
     * 
     *
     * @param tagContactRequest
     * @return Result of the TagContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.TagContact
     * @see AWS API
     *      Documentation
     */
    default TagContactResponse tagContact(TagContactRequest tagContactRequest) throws InvalidRequestException,
            ResourceNotFoundException, InternalServiceException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Adds the specified tags to the contact resource. For more information about this API is used, see Set up granular billing for a
     * detailed view of your Amazon Connect usage.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link TagContactRequest.Builder} avoiding the need to
     * create one manually via {@link TagContactRequest#builder()}
     * 
     *
     * @param tagContactRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.TagContactRequest.Builder} to create a request.
     * @return Result of the TagContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.TagContact
     * @see AWS API
     *      Documentation
     */
    default TagContactResponse tagContact(Consumer tagContactRequest) throws InvalidRequestException,
            ResourceNotFoundException, InternalServiceException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return tagContact(TagContactRequest.builder().applyMutation(tagContactRequest).build());
    }

    /**
     * 
     * Adds the specified tags to the specified resource.
     * 
     * 
     * Some of the supported resource types are agents, routing profiles, queues, quick connects, contact flows, agent
     * statuses, hours of operation, phone numbers, security profiles, and task templates. For a complete list, see Tagging resources in Amazon
     * Connect.
     * 
     * 
     * For sample policies that use tags, see Amazon
     * Connect Identity-Based Policy Examples in the Amazon Connect Administrator Guide.
     * 
     *
     * @param tagResourceRequest
     * @return Result of the TagResource operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.TagResource
     * @see AWS API
     *      Documentation
     */
    default TagResourceResponse tagResource(TagResourceRequest tagResourceRequest) throws InvalidRequestException,
            InvalidParameterException, InternalServiceException, ResourceNotFoundException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Adds the specified tags to the specified resource.
     * 
     * 
     * Some of the supported resource types are agents, routing profiles, queues, quick connects, contact flows, agent
     * statuses, hours of operation, phone numbers, security profiles, and task templates. For a complete list, see Tagging resources in Amazon
     * Connect.
     * 
     * 
     * For sample policies that use tags, see Amazon
     * Connect Identity-Based Policy Examples in the Amazon Connect Administrator Guide.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link TagResourceRequest.Builder} avoiding the need to
     * create one manually via {@link TagResourceRequest#builder()}
     * 
     *
     * @param tagResourceRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.TagResourceRequest.Builder} to create a request.
     * @return Result of the TagResource operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.TagResource
     * @see AWS API
     *      Documentation
     */
    default TagResourceResponse tagResource(Consumer tagResourceRequest)
            throws InvalidRequestException, InvalidParameterException, InternalServiceException, ResourceNotFoundException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return tagResource(TagResourceRequest.builder().applyMutation(tagResourceRequest).build());
    }

    /**
     * 
     * Transfers contacts from one agent or queue to another agent or queue at any point after a contact is created. You
     * can transfer a contact to another queue by providing the flow which orchestrates the contact to the destination
     * queue. This gives you more control over contact handling and helps you adhere to the service level agreement
     * (SLA) guaranteed to your customers.
     * 
     * 
     * Note the following requirements:
     * 
     * 
     * 
     * 
     * Transfer is supported for only TASK contacts.
     * 
     * 
     * 
     * 
     * Do not use both QueueId and UserId in the same call.
     * 
     * 
     * 
     * 
     * The following flow types are supported: Inbound flow, Transfer to agent flow, and Transfer to queue flow.
     * 
     * 
     * 
     * 
     * The TransferContact API can be called only on active contacts.
     * 
     * 
     * 
     * 
     * A contact cannot be transferred more than 11 times.
     * 
     * 
     * 
     *
     * @param transferContactRequest
     * @return Result of the TransferContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws IdempotencyException
     *         An entity with the same name already exists.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.TransferContact
     * @see AWS API
     *      Documentation
     */
    default TransferContactResponse transferContact(TransferContactRequest transferContactRequest)
            throws InvalidRequestException, IdempotencyException, AccessDeniedException, ResourceNotFoundException,
            ServiceQuotaExceededException, ThrottlingException, InternalServiceException, AwsServiceException,
            SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Transfers contacts from one agent or queue to another agent or queue at any point after a contact is created. You
     * can transfer a contact to another queue by providing the flow which orchestrates the contact to the destination
     * queue. This gives you more control over contact handling and helps you adhere to the service level agreement
     * (SLA) guaranteed to your customers.
     * 
     * 
     * Note the following requirements:
     * 
     * 
     * 
     * 
     * Transfer is supported for only TASK contacts.
     * 
     * 
     * 
     * 
     * Do not use both QueueId and UserId in the same call.
     * 
     * 
     * 
     * 
     * The following flow types are supported: Inbound flow, Transfer to agent flow, and Transfer to queue flow.
     * 
     * 
     * 
     * 
     * The TransferContact API can be called only on active contacts.
     * 
     * 
     * 
     * 
     * A contact cannot be transferred more than 11 times.
     * 
     * 
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link TransferContactRequest.Builder} avoiding the need
     * to create one manually via {@link TransferContactRequest#builder()}
     * 
     *
     * @param transferContactRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.TransferContactRequest.Builder} to create a request.
     * @return Result of the TransferContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws IdempotencyException
     *         An entity with the same name already exists.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.TransferContact
     * @see AWS API
     *      Documentation
     */
    default TransferContactResponse transferContact(Consumer transferContactRequest)
            throws InvalidRequestException, IdempotencyException, AccessDeniedException, ResourceNotFoundException,
            ServiceQuotaExceededException, ThrottlingException, InternalServiceException, AwsServiceException,
            SdkClientException, ConnectException {
        return transferContact(TransferContactRequest.builder().applyMutation(transferContactRequest).build());
    }

    /**
     * 
     * Removes the specified tags from the contact resource. For more information about this API is used, see Set up granular billing for a
     * detailed view of your Amazon Connect usage.
     * 
     *
     * @param untagContactRequest
     * @return Result of the UntagContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UntagContact
     * @see AWS API
     *      Documentation
     */
    default UntagContactResponse untagContact(UntagContactRequest untagContactRequest) throws InvalidRequestException,
            ResourceNotFoundException, InternalServiceException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Removes the specified tags from the contact resource. For more information about this API is used, see Set up granular billing for a
     * detailed view of your Amazon Connect usage.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UntagContactRequest.Builder} avoiding the need to
     * create one manually via {@link UntagContactRequest#builder()}
     * 
     *
     * @param untagContactRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UntagContactRequest.Builder} to create a request.
     * @return Result of the UntagContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UntagContact
     * @see AWS API
     *      Documentation
     */
    default UntagContactResponse untagContact(Consumer untagContactRequest)
            throws InvalidRequestException, ResourceNotFoundException, InternalServiceException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return untagContact(UntagContactRequest.builder().applyMutation(untagContactRequest).build());
    }

    /**
     * 
     * Removes the specified tags from the specified resource.
     * 
     *
     * @param untagResourceRequest
     * @return Result of the UntagResource operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UntagResource
     * @see AWS API
     *      Documentation
     */
    default UntagResourceResponse untagResource(UntagResourceRequest untagResourceRequest) throws InvalidRequestException,
            InvalidParameterException, InternalServiceException, ResourceNotFoundException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Removes the specified tags from the specified resource.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UntagResourceRequest.Builder} avoiding the need to
     * create one manually via {@link UntagResourceRequest#builder()}
     * 
     *
     * @param untagResourceRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UntagResourceRequest.Builder} to create a request.
     * @return Result of the UntagResource operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UntagResource
     * @see AWS API
     *      Documentation
     */
    default UntagResourceResponse untagResource(Consumer untagResourceRequest)
            throws InvalidRequestException, InvalidParameterException, InternalServiceException, ResourceNotFoundException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return untagResource(UntagResourceRequest.builder().applyMutation(untagResourceRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Updates agent status.
     * 
     *
     * @param updateAgentStatusRequest
     * @return Result of the UpdateAgentStatus operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateAgentStatus
     * @see AWS API
     *      Documentation
     */
    default UpdateAgentStatusResponse updateAgentStatus(UpdateAgentStatusRequest updateAgentStatusRequest)
            throws InvalidRequestException, InvalidParameterException, DuplicateResourceException, ResourceNotFoundException,
            LimitExceededException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Updates agent status.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateAgentStatusRequest.Builder} avoiding the need
     * to create one manually via {@link UpdateAgentStatusRequest#builder()}
     * 
     *
     * @param updateAgentStatusRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateAgentStatusRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateAgentStatus operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateAgentStatus
     * @see AWS API
     *      Documentation
     */
    default UpdateAgentStatusResponse updateAgentStatus(Consumer updateAgentStatusRequest)
            throws InvalidRequestException, InvalidParameterException, DuplicateResourceException, ResourceNotFoundException,
            LimitExceededException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        return updateAgentStatus(UpdateAgentStatusRequest.builder().applyMutation(updateAgentStatusRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change. To request access to this API,
     * contact Amazon Web Services Support.
     * 
     * 
     * Updates the selected authentication profile.
     * 
     *
     * @param updateAuthenticationProfileRequest
     * @return Result of the UpdateAuthenticationProfile operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateAuthenticationProfile
     * @see AWS API Documentation
     */
    default UpdateAuthenticationProfileResponse updateAuthenticationProfile(
            UpdateAuthenticationProfileRequest updateAuthenticationProfileRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change. To request access to this API,
     * contact Amazon Web Services Support.
     * 
     * 
     * Updates the selected authentication profile.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateAuthenticationProfileRequest.Builder}
     * avoiding the need to create one manually via {@link UpdateAuthenticationProfileRequest#builder()}
     * 
     *
     * @param updateAuthenticationProfileRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateAuthenticationProfileRequest.Builder} to create
     *        a request.
     * @return Result of the UpdateAuthenticationProfile operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateAuthenticationProfile
     * @see AWS API Documentation
     */
    default UpdateAuthenticationProfileResponse updateAuthenticationProfile(
            Consumer updateAuthenticationProfileRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateAuthenticationProfile(UpdateAuthenticationProfileRequest.builder()
                .applyMutation(updateAuthenticationProfileRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Adds or updates user-defined contact information associated with the specified contact. At least one field to be
     * updated must be present in the request.
     * 
     * 
     * 
     * You can add or update user-defined contact information for both ongoing and completed contacts.
     * 
     * 
     *
     * @param updateContactRequest
     * @return Result of the UpdateContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateContact
     * @see AWS API
     *      Documentation
     */
    default UpdateContactResponse updateContact(UpdateContactRequest updateContactRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, InternalServiceException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Adds or updates user-defined contact information associated with the specified contact. At least one field to be
     * updated must be present in the request.
     * 
     * 
     * 
     * You can add or update user-defined contact information for both ongoing and completed contacts.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateContactRequest.Builder} avoiding the need to
     * create one manually via {@link UpdateContactRequest#builder()}
     * 
     *
     * @param updateContactRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateContactRequest.Builder} to create a request.
     * @return Result of the UpdateContact operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateContact
     * @see AWS API
     *      Documentation
     */
    default UpdateContactResponse updateContact(Consumer updateContactRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return updateContact(UpdateContactRequest.builder().applyMutation(updateContactRequest).build());
    }

    /**
     * 
     * Creates or updates user-defined contact attributes associated with the specified contact.
     * 
     * 
     * You can create or update user-defined attributes for both ongoing and completed contacts. For example, while the
     * call is active, you can update the customer's name or the reason the customer called. You can add notes about
     * steps that the agent took during the call that display to the next agent that takes the call. You can also update
     * attributes for a contact using data from your CRM application and save the data with the contact in Amazon
     * Connect. You could also flag calls for additional analysis, such as legal review or to identify abusive callers.
     * 
     * 
     * Contact attributes are available in Amazon Connect for 24 months, and are then deleted. For information about
     * contact record retention and the maximum size of the contact record attributes section, see Feature specifications in the Amazon Connect Administrator Guide.
     * 
     *
     * @param updateContactAttributesRequest
     * @return Result of the UpdateContactAttributes operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateContactAttributes
     * @see AWS API Documentation
     */
    default UpdateContactAttributesResponse updateContactAttributes(UpdateContactAttributesRequest updateContactAttributesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Creates or updates user-defined contact attributes associated with the specified contact.
     * 
     * 
     * You can create or update user-defined attributes for both ongoing and completed contacts. For example, while the
     * call is active, you can update the customer's name or the reason the customer called. You can add notes about
     * steps that the agent took during the call that display to the next agent that takes the call. You can also update
     * attributes for a contact using data from your CRM application and save the data with the contact in Amazon
     * Connect. You could also flag calls for additional analysis, such as legal review or to identify abusive callers.
     * 
     * 
     * Contact attributes are available in Amazon Connect for 24 months, and are then deleted. For information about
     * contact record retention and the maximum size of the contact record attributes section, see Feature specifications in the Amazon Connect Administrator Guide.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateContactAttributesRequest.Builder} avoiding
     * the need to create one manually via {@link UpdateContactAttributesRequest#builder()}
     * 
     *
     * @param updateContactAttributesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateContactAttributesRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateContactAttributes operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateContactAttributes
     * @see AWS API Documentation
     */
    default UpdateContactAttributesResponse updateContactAttributes(
            Consumer updateContactAttributesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, InternalServiceException, AwsServiceException,
            SdkClientException, ConnectException {
        return updateContactAttributes(UpdateContactAttributesRequest.builder().applyMutation(updateContactAttributesRequest)
                .build());
    }

    /**
     * 
     * Updates details about a contact evaluation in the specified Amazon Connect instance. A contact evaluation must be
     * in draft state. Answers included in the request are merged with existing answers for the given evaluation. An
     * answer or note can be deleted by passing an empty object ({}) to the question identifier.
     * 
     *
     * @param updateContactEvaluationRequest
     * @return Result of the UpdateContactEvaluation operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateContactEvaluation
     * @see AWS API Documentation
     */
    default UpdateContactEvaluationResponse updateContactEvaluation(UpdateContactEvaluationRequest updateContactEvaluationRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            ResourceConflictException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates details about a contact evaluation in the specified Amazon Connect instance. A contact evaluation must be
     * in draft state. Answers included in the request are merged with existing answers for the given evaluation. An
     * answer or note can be deleted by passing an empty object ({}) to the question identifier.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateContactEvaluationRequest.Builder} avoiding
     * the need to create one manually via {@link UpdateContactEvaluationRequest#builder()}
     * 
     *
     * @param updateContactEvaluationRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateContactEvaluationRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateContactEvaluation operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateContactEvaluation
     * @see AWS API Documentation
     */
    default UpdateContactEvaluationResponse updateContactEvaluation(
            Consumer updateContactEvaluationRequest) throws InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, ResourceConflictException,
            AwsServiceException, SdkClientException, ConnectException {
        return updateContactEvaluation(UpdateContactEvaluationRequest.builder().applyMutation(updateContactEvaluationRequest)
                .build());
    }

    /**
     * 
     * Updates the specified flow.
     * 
     * 
     * You can also create and update flows using the Amazon Connect Flow
     * language.
     * 
     * 
     * Use the $SAVED alias in the request to describe the SAVED content of a Flow. For
     * example, arn:aws:.../contact-flow/{id}:$SAVED. Once a contact flow is published,
     * $SAVED needs to be supplied to view saved content that has not been published.
     * 
     *
     * @param updateContactFlowContentRequest
     * @return Result of the UpdateContactFlowContent operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidContactFlowException
     *         The flow is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateContactFlowContent
     * @see AWS API Documentation
     */
    default UpdateContactFlowContentResponse updateContactFlowContent(
            UpdateContactFlowContentRequest updateContactFlowContentRequest) throws InvalidRequestException,
            InvalidContactFlowException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates the specified flow.
     * 
     * 
     * You can also create and update flows using the Amazon Connect Flow
     * language.
     * 
     * 
     * Use the $SAVED alias in the request to describe the SAVED content of a Flow. For
     * example, arn:aws:.../contact-flow/{id}:$SAVED. Once a contact flow is published,
     * $SAVED needs to be supplied to view saved content that has not been published.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateContactFlowContentRequest.Builder} avoiding
     * the need to create one manually via {@link UpdateContactFlowContentRequest#builder()}
     * 
     *
     * @param updateContactFlowContentRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateContactFlowContentRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateContactFlowContent operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidContactFlowException
     *         The flow is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateContactFlowContent
     * @see AWS API Documentation
     */
    default UpdateContactFlowContentResponse updateContactFlowContent(
            Consumer updateContactFlowContentRequest) throws InvalidRequestException,
            InvalidContactFlowException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateContactFlowContent(UpdateContactFlowContentRequest.builder().applyMutation(updateContactFlowContentRequest)
                .build());
    }

    /**
     * 
     * Updates metadata about specified flow.
     * 
     *
     * @param updateContactFlowMetadataRequest
     * @return Result of the UpdateContactFlowMetadata operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateContactFlowMetadata
     * @see AWS API Documentation
     */
    default UpdateContactFlowMetadataResponse updateContactFlowMetadata(
            UpdateContactFlowMetadataRequest updateContactFlowMetadataRequest) throws InvalidRequestException,
            InvalidParameterException, DuplicateResourceException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates metadata about specified flow.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateContactFlowMetadataRequest.Builder} avoiding
     * the need to create one manually via {@link UpdateContactFlowMetadataRequest#builder()}
     * 
     *
     * @param updateContactFlowMetadataRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateContactFlowMetadataRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateContactFlowMetadata operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateContactFlowMetadata
     * @see AWS API Documentation
     */
    default UpdateContactFlowMetadataResponse updateContactFlowMetadata(
            Consumer updateContactFlowMetadataRequest) throws InvalidRequestException,
            InvalidParameterException, DuplicateResourceException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateContactFlowMetadata(UpdateContactFlowMetadataRequest.builder()
                .applyMutation(updateContactFlowMetadataRequest).build());
    }

    /**
     * 
     * Updates specified flow module for the specified Amazon Connect instance.
     * 
     * 
     * Use the $SAVED alias in the request to describe the SAVED content of a Flow. For
     * example, arn:aws:.../contact-flow/{id}:$SAVED. Once a contact flow is published,
     * $SAVED needs to be supplied to view saved content that has not been published.
     * 
     *
     * @param updateContactFlowModuleContentRequest
     * @return Result of the UpdateContactFlowModuleContent operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidContactFlowModuleException
     *         The problems with the module. Please fix before trying again.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateContactFlowModuleContent
     * @see AWS API Documentation
     */
    default UpdateContactFlowModuleContentResponse updateContactFlowModuleContent(
            UpdateContactFlowModuleContentRequest updateContactFlowModuleContentRequest) throws AccessDeniedException,
            InvalidRequestException, InvalidContactFlowModuleException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates specified flow module for the specified Amazon Connect instance.
     * 
     * 
     * Use the $SAVED alias in the request to describe the SAVED content of a Flow. For
     * example, arn:aws:.../contact-flow/{id}:$SAVED. Once a contact flow is published,
     * $SAVED needs to be supplied to view saved content that has not been published.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateContactFlowModuleContentRequest.Builder}
     * avoiding the need to create one manually via {@link UpdateContactFlowModuleContentRequest#builder()}
     * 
     *
     * @param updateContactFlowModuleContentRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateContactFlowModuleContentRequest.Builder} to
     *        create a request.
     * @return Result of the UpdateContactFlowModuleContent operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidContactFlowModuleException
     *         The problems with the module. Please fix before trying again.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateContactFlowModuleContent
     * @see AWS API Documentation
     */
    default UpdateContactFlowModuleContentResponse updateContactFlowModuleContent(
            Consumer updateContactFlowModuleContentRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidContactFlowModuleException, ResourceNotFoundException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateContactFlowModuleContent(UpdateContactFlowModuleContentRequest.builder()
                .applyMutation(updateContactFlowModuleContentRequest).build());
    }

    /**
     * 
     * Updates metadata about specified flow module.
     * 
     *
     * @param updateContactFlowModuleMetadataRequest
     * @return Result of the UpdateContactFlowModuleMetadata operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateContactFlowModuleMetadata
     * @see AWS API Documentation
     */
    default UpdateContactFlowModuleMetadataResponse updateContactFlowModuleMetadata(
            UpdateContactFlowModuleMetadataRequest updateContactFlowModuleMetadataRequest) throws AccessDeniedException,
            InvalidRequestException, InvalidParameterException, DuplicateResourceException, ResourceNotFoundException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates metadata about specified flow module.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateContactFlowModuleMetadataRequest.Builder}
     * avoiding the need to create one manually via {@link UpdateContactFlowModuleMetadataRequest#builder()}
     * 
     *
     * @param updateContactFlowModuleMetadataRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateContactFlowModuleMetadataRequest.Builder} to
     *        create a request.
     * @return Result of the UpdateContactFlowModuleMetadata operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateContactFlowModuleMetadata
     * @see AWS API Documentation
     */
    default UpdateContactFlowModuleMetadataResponse updateContactFlowModuleMetadata(
            Consumer updateContactFlowModuleMetadataRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidParameterException, DuplicateResourceException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        return updateContactFlowModuleMetadata(UpdateContactFlowModuleMetadataRequest.builder()
                .applyMutation(updateContactFlowModuleMetadataRequest).build());
    }

    /**
     * 
     * The name of the flow.
     * 
     * 
     * You can also create and update flows using the Amazon Connect Flow
     * language.
     * 
     *
     * @param updateContactFlowNameRequest
     * @return Result of the UpdateContactFlowName operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateContactFlowName
     * @see AWS
     *      API Documentation
     */
    default UpdateContactFlowNameResponse updateContactFlowName(UpdateContactFlowNameRequest updateContactFlowNameRequest)
            throws InvalidRequestException, InvalidParameterException, DuplicateResourceException, ResourceNotFoundException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * The name of the flow.
     * 
     * 
     * You can also create and update flows using the Amazon Connect Flow
     * language.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateContactFlowNameRequest.Builder} avoiding the
     * need to create one manually via {@link UpdateContactFlowNameRequest#builder()}
     * 
     *
     * @param updateContactFlowNameRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateContactFlowNameRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateContactFlowName operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateContactFlowName
     * @see AWS
     *      API Documentation
     */
    default UpdateContactFlowNameResponse updateContactFlowName(
            Consumer updateContactFlowNameRequest) throws InvalidRequestException,
            InvalidParameterException, DuplicateResourceException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateContactFlowName(UpdateContactFlowNameRequest.builder().applyMutation(updateContactFlowNameRequest).build());
    }

    /**
     * 
     * Updates routing priority and age on the contact (QueuePriority and QueueTimeAdjustmentInSeconds).
     * These properties can be used to change a customer's position in the queue. For example, you can move a contact to
     * the back of the queue by setting a lower routing priority relative to other contacts in queue; or you can move a
     * contact to the front of the queue by increasing the routing age which will make the contact look artificially
     * older and therefore higher up in the first-in-first-out routing order. Note that adjusting the routing age of a
     * contact affects only its position in queue, and not its actual queue wait time as reported through metrics. These
     * properties can also be updated by using the Set routing
     * priority / age flow block.
     * 
     * 
     * 
     * Either QueuePriority or QueueTimeAdjustmentInSeconds should be provided within the request body,
     * but not both.
     * 
     * 
     *
     * @param updateContactRoutingDataRequest
     * @return Result of the UpdateContactRoutingData operation returned by the service.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateContactRoutingData
     * @see AWS API Documentation
     */
    default UpdateContactRoutingDataResponse updateContactRoutingData(
            UpdateContactRoutingDataRequest updateContactRoutingDataRequest) throws ResourceConflictException,
            InvalidParameterException, ResourceNotFoundException, InternalServiceException, ThrottlingException,
            AccessDeniedException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates routing priority and age on the contact (QueuePriority and QueueTimeAdjustmentInSeconds).
     * These properties can be used to change a customer's position in the queue. For example, you can move a contact to
     * the back of the queue by setting a lower routing priority relative to other contacts in queue; or you can move a
     * contact to the front of the queue by increasing the routing age which will make the contact look artificially
     * older and therefore higher up in the first-in-first-out routing order. Note that adjusting the routing age of a
     * contact affects only its position in queue, and not its actual queue wait time as reported through metrics. These
     * properties can also be updated by using the Set routing
     * priority / age flow block.
     * 
     * 
     * 
     * Either QueuePriority or QueueTimeAdjustmentInSeconds should be provided within the request body,
     * but not both.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateContactRoutingDataRequest.Builder} avoiding
     * the need to create one manually via {@link UpdateContactRoutingDataRequest#builder()}
     * 
     *
     * @param updateContactRoutingDataRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateContactRoutingDataRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateContactRoutingData operation returned by the service.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateContactRoutingData
     * @see AWS API Documentation
     */
    default UpdateContactRoutingDataResponse updateContactRoutingData(
            Consumer updateContactRoutingDataRequest) throws ResourceConflictException,
            InvalidParameterException, ResourceNotFoundException, InternalServiceException, ThrottlingException,
            AccessDeniedException, AwsServiceException, SdkClientException, ConnectException {
        return updateContactRoutingData(UpdateContactRoutingDataRequest.builder().applyMutation(updateContactRoutingDataRequest)
                .build());
    }

    /**
     * 
     * Updates the scheduled time of a task contact that is already scheduled.
     * 
     *
     * @param updateContactScheduleRequest
     * @return Result of the UpdateContactSchedule operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateContactSchedule
     * @see AWS
     *      API Documentation
     */
    default UpdateContactScheduleResponse updateContactSchedule(UpdateContactScheduleRequest updateContactScheduleRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            LimitExceededException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates the scheduled time of a task contact that is already scheduled.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateContactScheduleRequest.Builder} avoiding the
     * need to create one manually via {@link UpdateContactScheduleRequest#builder()}
     * 
     *
     * @param updateContactScheduleRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateContactScheduleRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateContactSchedule operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws LimitExceededException
     *         The allowed limit for the resource has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateContactSchedule
     * @see AWS
     *      API Documentation
     */
    default UpdateContactScheduleResponse updateContactSchedule(
            Consumer updateContactScheduleRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, LimitExceededException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateContactSchedule(UpdateContactScheduleRequest.builder().applyMutation(updateContactScheduleRequest).build());
    }

    /**
     * 
     * Updates details about a specific evaluation form version in the specified Amazon Connect instance. Question and
     * section identifiers cannot be duplicated within the same evaluation form.
     * 
     * 
     * This operation does not support partial updates. Instead it does a full update of evaluation form content.
     * 
     *
     * @param updateEvaluationFormRequest
     * @return Result of the UpdateEvaluationForm operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateEvaluationForm
     * @see AWS
     *      API Documentation
     */
    default UpdateEvaluationFormResponse updateEvaluationForm(UpdateEvaluationFormRequest updateEvaluationFormRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            ServiceQuotaExceededException, ResourceConflictException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates details about a specific evaluation form version in the specified Amazon Connect instance. Question and
     * section identifiers cannot be duplicated within the same evaluation form.
     * 
     * 
     * This operation does not support partial updates. Instead it does a full update of evaluation form content.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateEvaluationFormRequest.Builder} avoiding the
     * need to create one manually via {@link UpdateEvaluationFormRequest#builder()}
     * 
     *
     * @param updateEvaluationFormRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateEvaluationFormRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateEvaluationForm operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateEvaluationForm
     * @see AWS
     *      API Documentation
     */
    default UpdateEvaluationFormResponse updateEvaluationForm(
            Consumer updateEvaluationFormRequest) throws InvalidParameterException,
            ResourceNotFoundException, ThrottlingException, InternalServiceException, ServiceQuotaExceededException,
            ResourceConflictException, AwsServiceException, SdkClientException, ConnectException {
        return updateEvaluationForm(UpdateEvaluationFormRequest.builder().applyMutation(updateEvaluationFormRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Updates the hours of operation.
     * 
     *
     * @param updateHoursOfOperationRequest
     * @return Result of the UpdateHoursOfOperation operation returned by the service.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateHoursOfOperation
     * @see AWS API Documentation
     */
    default UpdateHoursOfOperationResponse updateHoursOfOperation(UpdateHoursOfOperationRequest updateHoursOfOperationRequest)
            throws DuplicateResourceException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Updates the hours of operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateHoursOfOperationRequest.Builder} avoiding the
     * need to create one manually via {@link UpdateHoursOfOperationRequest#builder()}
     * 
     *
     * @param updateHoursOfOperationRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateHoursOfOperationRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateHoursOfOperation operation returned by the service.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateHoursOfOperation
     * @see AWS API Documentation
     */
    default UpdateHoursOfOperationResponse updateHoursOfOperation(
            Consumer updateHoursOfOperationRequest) throws DuplicateResourceException,
            InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateHoursOfOperation(UpdateHoursOfOperationRequest.builder().applyMutation(updateHoursOfOperationRequest)
                .build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Updates the value for the specified attribute type.
     * 
     *
     * @param updateInstanceAttributeRequest
     * @return Result of the UpdateInstanceAttribute operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateInstanceAttribute
     * @see AWS API Documentation
     */
    default UpdateInstanceAttributeResponse updateInstanceAttribute(UpdateInstanceAttributeRequest updateInstanceAttributeRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Updates the value for the specified attribute type.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateInstanceAttributeRequest.Builder} avoiding
     * the need to create one manually via {@link UpdateInstanceAttributeRequest#builder()}
     * 
     *
     * @param updateInstanceAttributeRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateInstanceAttributeRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateInstanceAttribute operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateInstanceAttribute
     * @see AWS API Documentation
     */
    default UpdateInstanceAttributeResponse updateInstanceAttribute(
            Consumer updateInstanceAttributeRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        return updateInstanceAttribute(UpdateInstanceAttributeRequest.builder().applyMutation(updateInstanceAttributeRequest)
                .build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Updates an existing configuration for a resource type. This API is idempotent.
     * 
     *
     * @param updateInstanceStorageConfigRequest
     * @return Result of the UpdateInstanceStorageConfig operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateInstanceStorageConfig
     * @see AWS API Documentation
     */
    default UpdateInstanceStorageConfigResponse updateInstanceStorageConfig(
            UpdateInstanceStorageConfigRequest updateInstanceStorageConfigRequest) throws ResourceNotFoundException,
            InternalServiceException, InvalidRequestException, InvalidParameterException, ThrottlingException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Updates an existing configuration for a resource type. This API is idempotent.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateInstanceStorageConfigRequest.Builder}
     * avoiding the need to create one manually via {@link UpdateInstanceStorageConfigRequest#builder()}
     * 
     *
     * @param updateInstanceStorageConfigRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateInstanceStorageConfigRequest.Builder} to create
     *        a request.
     * @return Result of the UpdateInstanceStorageConfig operation returned by the service.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateInstanceStorageConfig
     * @see AWS API Documentation
     */
    default UpdateInstanceStorageConfigResponse updateInstanceStorageConfig(
            Consumer updateInstanceStorageConfigRequest)
            throws ResourceNotFoundException, InternalServiceException, InvalidRequestException, InvalidParameterException,
            ThrottlingException, AwsServiceException, SdkClientException, ConnectException {
        return updateInstanceStorageConfig(UpdateInstanceStorageConfigRequest.builder()
                .applyMutation(updateInstanceStorageConfigRequest).build());
    }

    /**
     * 
     * Updates timeouts for when human chat participants are to be considered idle, and when agents are automatically
     * disconnected from a chat due to idleness. You can set four timers:
     * 
     * 
     * 
     * 
     * Customer idle timeout
     * 
     * 
     * 
     * 
     * Customer auto-disconnect timeout
     * 
     * 
     * 
     * 
     * Agent idle timeout
     * 
     * 
     * 
     * 
     * Agent auto-disconnect timeout
     * 
     * 
     * 
     * 
     * For more information about how chat timeouts work, see Set up chat timeouts for
     * human participants.
     * 
     *
     * @param updateParticipantRoleConfigRequest
     * @return Result of the UpdateParticipantRoleConfig operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateParticipantRoleConfig
     * @see AWS API Documentation
     */
    default UpdateParticipantRoleConfigResponse updateParticipantRoleConfig(
            UpdateParticipantRoleConfigRequest updateParticipantRoleConfigRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, AccessDeniedException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates timeouts for when human chat participants are to be considered idle, and when agents are automatically
     * disconnected from a chat due to idleness. You can set four timers:
     * 
     * 
     * 
     * 
     * Customer idle timeout
     * 
     * 
     * 
     * 
     * Customer auto-disconnect timeout
     * 
     * 
     * 
     * 
     * Agent idle timeout
     * 
     * 
     * 
     * 
     * Agent auto-disconnect timeout
     * 
     * 
     * 
     * 
     * For more information about how chat timeouts work, see Set up chat timeouts for
     * human participants.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateParticipantRoleConfigRequest.Builder}
     * avoiding the need to create one manually via {@link UpdateParticipantRoleConfigRequest#builder()}
     * 
     *
     * @param updateParticipantRoleConfigRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateParticipantRoleConfigRequest.Builder} to create
     *        a request.
     * @return Result of the UpdateParticipantRoleConfig operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateParticipantRoleConfig
     * @see AWS API Documentation
     */
    default UpdateParticipantRoleConfigResponse updateParticipantRoleConfig(
            Consumer updateParticipantRoleConfigRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, AccessDeniedException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateParticipantRoleConfig(UpdateParticipantRoleConfigRequest.builder()
                .applyMutation(updateParticipantRoleConfigRequest).build());
    }

    /**
     * 
     * Updates your claimed phone number from its current Amazon Connect instance or traffic distribution group to
     * another Amazon Connect instance or traffic distribution group in the same Amazon Web Services Region.
     * 
     * 
     * 
     * After using this API, you must verify that the phone number is attached to the correct flow in the target
     * instance or traffic distribution group. You need to do this because the API switches only the phone number to a
     * new instance or traffic distribution group. It doesn't migrate the flow configuration of the phone number, too.
     * 
     * 
     * You can call DescribePhoneNumber
     *  API to verify the status of a previous UpdatePhoneNumber
     * operation.
     * 
     * 
     *
     * @param updatePhoneNumberRequest
     * @return Result of the UpdatePhoneNumber operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws IdempotencyException
     *         An entity with the same name already exists.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdatePhoneNumber
     * @see AWS API
     *      Documentation
     */
    default UpdatePhoneNumberResponse updatePhoneNumber(UpdatePhoneNumberRequest updatePhoneNumberRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            ResourceInUseException, IdempotencyException, AccessDeniedException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates your claimed phone number from its current Amazon Connect instance or traffic distribution group to
     * another Amazon Connect instance or traffic distribution group in the same Amazon Web Services Region.
     * 
     * 
     * 
     * After using this API, you must verify that the phone number is attached to the correct flow in the target
     * instance or traffic distribution group. You need to do this because the API switches only the phone number to a
     * new instance or traffic distribution group. It doesn't migrate the flow configuration of the phone number, too.
     * 
     * 
     * You can call DescribePhoneNumber
     *  API to verify the status of a previous UpdatePhoneNumber
     * operation.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdatePhoneNumberRequest.Builder} avoiding the need
     * to create one manually via {@link UpdatePhoneNumberRequest#builder()}
     * 
     *
     * @param updatePhoneNumberRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdatePhoneNumberRequest.Builder} to create a
     *        request.
     * @return Result of the UpdatePhoneNumber operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws IdempotencyException
     *         An entity with the same name already exists.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdatePhoneNumber
     * @see AWS API
     *      Documentation
     */
    default UpdatePhoneNumberResponse updatePhoneNumber(Consumer updatePhoneNumberRequest)
            throws InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            ResourceInUseException, IdempotencyException, AccessDeniedException, AwsServiceException, SdkClientException,
            ConnectException {
        return updatePhoneNumber(UpdatePhoneNumberRequest.builder().applyMutation(updatePhoneNumberRequest).build());
    }

    /**
     * 
     * Updates a phone number’s metadata.
     * 
     * 
     * 
     * To verify the status of a previous UpdatePhoneNumberMetadata operation, call the DescribePhoneNumber API.
     * 
     * 
     *
     * @param updatePhoneNumberMetadataRequest
     * @return Result of the UpdatePhoneNumberMetadata operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws IdempotencyException
     *         An entity with the same name already exists.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdatePhoneNumberMetadata
     * @see AWS API Documentation
     */
    default UpdatePhoneNumberMetadataResponse updatePhoneNumberMetadata(
            UpdatePhoneNumberMetadataRequest updatePhoneNumberMetadataRequest) throws InvalidParameterException,
            InvalidRequestException, AccessDeniedException, ResourceNotFoundException, ResourceInUseException,
            IdempotencyException, ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates a phone number’s metadata.
     * 
     * 
     * 
     * To verify the status of a previous UpdatePhoneNumberMetadata operation, call the DescribePhoneNumber API.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdatePhoneNumberMetadataRequest.Builder} avoiding
     * the need to create one manually via {@link UpdatePhoneNumberMetadataRequest#builder()}
     * 
     *
     * @param updatePhoneNumberMetadataRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdatePhoneNumberMetadataRequest.Builder} to create a
     *        request.
     * @return Result of the UpdatePhoneNumberMetadata operation returned by the service.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws IdempotencyException
     *         An entity with the same name already exists.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdatePhoneNumberMetadata
     * @see AWS API Documentation
     */
    default UpdatePhoneNumberMetadataResponse updatePhoneNumberMetadata(
            Consumer updatePhoneNumberMetadataRequest)
            throws InvalidParameterException, InvalidRequestException, AccessDeniedException, ResourceNotFoundException,
            ResourceInUseException, IdempotencyException, ThrottlingException, InternalServiceException, AwsServiceException,
            SdkClientException, ConnectException {
        return updatePhoneNumberMetadata(UpdatePhoneNumberMetadataRequest.builder()
                .applyMutation(updatePhoneNumberMetadataRequest).build());
    }

    /**
     * 
     * Updates a predefined attribute for the specified Amazon Connect instance. Predefined attributes are
     * attributes in an Amazon Connect instance that can be used to route contacts to an agent or pools of agents within
     * a queue. For more information, see Create predefined
     * attributes for routing contacts to agents.
     * 
     *
     * @param updatePredefinedAttributeRequest
     * @return Result of the UpdatePredefinedAttribute operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdatePredefinedAttribute
     * @see AWS API Documentation
     */
    default UpdatePredefinedAttributeResponse updatePredefinedAttribute(
            UpdatePredefinedAttributeRequest updatePredefinedAttributeRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates a predefined attribute for the specified Amazon Connect instance. Predefined attributes are
     * attributes in an Amazon Connect instance that can be used to route contacts to an agent or pools of agents within
     * a queue. For more information, see Create predefined
     * attributes for routing contacts to agents.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdatePredefinedAttributeRequest.Builder} avoiding
     * the need to create one manually via {@link UpdatePredefinedAttributeRequest#builder()}
     * 
     *
     * @param updatePredefinedAttributeRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdatePredefinedAttributeRequest.Builder} to create a
     *        request.
     * @return Result of the UpdatePredefinedAttribute operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdatePredefinedAttribute
     * @see AWS API Documentation
     */
    default UpdatePredefinedAttributeResponse updatePredefinedAttribute(
            Consumer updatePredefinedAttributeRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return updatePredefinedAttribute(UpdatePredefinedAttributeRequest.builder()
                .applyMutation(updatePredefinedAttributeRequest).build());
    }

    /**
     * 
     * Updates a prompt.
     * 
     *
     * @param updatePromptRequest
     * @return Result of the UpdatePrompt operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdatePrompt
     * @see AWS API
     *      Documentation
     */
    default UpdatePromptResponse updatePrompt(UpdatePromptRequest updatePromptRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates a prompt.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdatePromptRequest.Builder} avoiding the need to
     * create one manually via {@link UpdatePromptRequest#builder()}
     * 
     *
     * @param updatePromptRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdatePromptRequest.Builder} to create a request.
     * @return Result of the UpdatePrompt operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdatePrompt
     * @see AWS API
     *      Documentation
     */
    default UpdatePromptResponse updatePrompt(Consumer updatePromptRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updatePrompt(UpdatePromptRequest.builder().applyMutation(updatePromptRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Updates the hours of operation for the specified queue.
     * 
     *
     * @param updateQueueHoursOfOperationRequest
     * @return Result of the UpdateQueueHoursOfOperation operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateQueueHoursOfOperation
     * @see AWS API Documentation
     */
    default UpdateQueueHoursOfOperationResponse updateQueueHoursOfOperation(
            UpdateQueueHoursOfOperationRequest updateQueueHoursOfOperationRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Updates the hours of operation for the specified queue.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateQueueHoursOfOperationRequest.Builder}
     * avoiding the need to create one manually via {@link UpdateQueueHoursOfOperationRequest#builder()}
     * 
     *
     * @param updateQueueHoursOfOperationRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateQueueHoursOfOperationRequest.Builder} to create
     *        a request.
     * @return Result of the UpdateQueueHoursOfOperation operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateQueueHoursOfOperation
     * @see AWS API Documentation
     */
    default UpdateQueueHoursOfOperationResponse updateQueueHoursOfOperation(
            Consumer updateQueueHoursOfOperationRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateQueueHoursOfOperation(UpdateQueueHoursOfOperationRequest.builder()
                .applyMutation(updateQueueHoursOfOperationRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Updates the maximum number of contacts allowed in a queue before it is considered full.
     * 
     *
     * @param updateQueueMaxContactsRequest
     * @return Result of the UpdateQueueMaxContacts operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateQueueMaxContacts
     * @see AWS API Documentation
     */
    default UpdateQueueMaxContactsResponse updateQueueMaxContacts(UpdateQueueMaxContactsRequest updateQueueMaxContactsRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Updates the maximum number of contacts allowed in a queue before it is considered full.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateQueueMaxContactsRequest.Builder} avoiding the
     * need to create one manually via {@link UpdateQueueMaxContactsRequest#builder()}
     * 
     *
     * @param updateQueueMaxContactsRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateQueueMaxContactsRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateQueueMaxContacts operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateQueueMaxContacts
     * @see AWS API Documentation
     */
    default UpdateQueueMaxContactsResponse updateQueueMaxContacts(
            Consumer updateQueueMaxContactsRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return updateQueueMaxContacts(UpdateQueueMaxContactsRequest.builder().applyMutation(updateQueueMaxContactsRequest)
                .build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Updates the name and description of a queue. At least Name or Description must be
     * provided.
     * 
     *
     * @param updateQueueNameRequest
     * @return Result of the UpdateQueueName operation returned by the service.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateQueueName
     * @see AWS API
     *      Documentation
     */
    default UpdateQueueNameResponse updateQueueName(UpdateQueueNameRequest updateQueueNameRequest)
            throws DuplicateResourceException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Updates the name and description of a queue. At least Name or Description must be
     * provided.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateQueueNameRequest.Builder} avoiding the need
     * to create one manually via {@link UpdateQueueNameRequest#builder()}
     * 
     *
     * @param updateQueueNameRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateQueueNameRequest.Builder} to create a request.
     * @return Result of the UpdateQueueName operation returned by the service.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateQueueName
     * @see AWS API
     *      Documentation
     */
    default UpdateQueueNameResponse updateQueueName(Consumer updateQueueNameRequest)
            throws DuplicateResourceException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateQueueName(UpdateQueueNameRequest.builder().applyMutation(updateQueueNameRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Updates the outbound caller ID name, number, and outbound whisper flow for a specified queue.
     * 
     * 
     * 
     * 
     * 
     * If the phone number is claimed to a traffic distribution group that was created in the same Region as the Amazon
     * Connect instance where you are calling this API, then you can use a full phone number ARN or a UUID for
     * OutboundCallerIdNumberId. However, if the phone number is claimed to a traffic distribution group
     * that is in one Region, and you are calling this API from an instance in another Amazon Web Services Region that
     * is associated with the traffic distribution group, you must provide a full phone number ARN. If a UUID is
     * provided in this scenario, you will receive a ResourceNotFoundException.
     * 
     * 
     * 
     * 
     * Only use the phone number ARN format that doesn't contain instance in the path, for example,
     * arn:aws:connect:us-east-1:1234567890:phone-number/uuid. This is the same ARN format that is returned
     * when you call the ListPhoneNumbersV2
     * API.
     * 
     * 
     * 
     * 
     * If you plan to use IAM policies to allow/deny access to this API for phone number resources claimed to a traffic
     * distribution group, see Allow or Deny queue API actions for phone numbers in a replica Region.
     * 
     * 
     * 
     * 
     *
     * @param updateQueueOutboundCallerConfigRequest
     * @return Result of the UpdateQueueOutboundCallerConfig operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateQueueOutboundCallerConfig
     * @see AWS API Documentation
     */
    default UpdateQueueOutboundCallerConfigResponse updateQueueOutboundCallerConfig(
            UpdateQueueOutboundCallerConfigRequest updateQueueOutboundCallerConfigRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Updates the outbound caller ID name, number, and outbound whisper flow for a specified queue.
     * 
     * 
     * 
     * 
     * 
     * If the phone number is claimed to a traffic distribution group that was created in the same Region as the Amazon
     * Connect instance where you are calling this API, then you can use a full phone number ARN or a UUID for
     * OutboundCallerIdNumberId. However, if the phone number is claimed to a traffic distribution group
     * that is in one Region, and you are calling this API from an instance in another Amazon Web Services Region that
     * is associated with the traffic distribution group, you must provide a full phone number ARN. If a UUID is
     * provided in this scenario, you will receive a ResourceNotFoundException.
     * 
     * 
     * 
     * 
     * Only use the phone number ARN format that doesn't contain instance in the path, for example,
     * arn:aws:connect:us-east-1:1234567890:phone-number/uuid. This is the same ARN format that is returned
     * when you call the ListPhoneNumbersV2
     * API.
     * 
     * 
     * 
     * 
     * If you plan to use IAM policies to allow/deny access to this API for phone number resources claimed to a traffic
     * distribution group, see Allow or Deny queue API actions for phone numbers in a replica Region.
     * 
     * 
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateQueueOutboundCallerConfigRequest.Builder}
     * avoiding the need to create one manually via {@link UpdateQueueOutboundCallerConfigRequest#builder()}
     * 
     *
     * @param updateQueueOutboundCallerConfigRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateQueueOutboundCallerConfigRequest.Builder} to
     *        create a request.
     * @return Result of the UpdateQueueOutboundCallerConfig operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateQueueOutboundCallerConfig
     * @see AWS API Documentation
     */
    default UpdateQueueOutboundCallerConfigResponse updateQueueOutboundCallerConfig(
            Consumer updateQueueOutboundCallerConfigRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateQueueOutboundCallerConfig(UpdateQueueOutboundCallerConfigRequest.builder()
                .applyMutation(updateQueueOutboundCallerConfigRequest).build());
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Updates the status of the queue.
     * 
     *
     * @param updateQueueStatusRequest
     * @return Result of the UpdateQueueStatus operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateQueueStatus
     * @see AWS API
     *      Documentation
     */
    default UpdateQueueStatusResponse updateQueueStatus(UpdateQueueStatusRequest updateQueueStatusRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * This API is in preview release for Amazon Connect and is subject to change.
     * 
     * 
     * Updates the status of the queue.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateQueueStatusRequest.Builder} avoiding the need
     * to create one manually via {@link UpdateQueueStatusRequest#builder()}
     * 
     *
     * @param updateQueueStatusRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateQueueStatusRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateQueueStatus operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateQueueStatus
     * @see AWS API
     *      Documentation
     */
    default UpdateQueueStatusResponse updateQueueStatus(Consumer updateQueueStatusRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateQueueStatus(UpdateQueueStatusRequest.builder().applyMutation(updateQueueStatusRequest).build());
    }

    /**
     * 
     * Updates the configuration settings for the specified quick connect.
     * 
     *
     * @param updateQuickConnectConfigRequest
     * @return Result of the UpdateQuickConnectConfig operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateQuickConnectConfig
     * @see AWS API Documentation
     */
    default UpdateQuickConnectConfigResponse updateQuickConnectConfig(
            UpdateQuickConnectConfigRequest updateQuickConnectConfigRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates the configuration settings for the specified quick connect.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateQuickConnectConfigRequest.Builder} avoiding
     * the need to create one manually via {@link UpdateQuickConnectConfigRequest#builder()}
     * 
     *
     * @param updateQuickConnectConfigRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateQuickConnectConfigRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateQuickConnectConfig operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateQuickConnectConfig
     * @see AWS API Documentation
     */
    default UpdateQuickConnectConfigResponse updateQuickConnectConfig(
            Consumer updateQuickConnectConfigRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return updateQuickConnectConfig(UpdateQuickConnectConfigRequest.builder().applyMutation(updateQuickConnectConfigRequest)
                .build());
    }

    /**
     * 
     * Updates the name and description of a quick connect. The request accepts the following data in JSON format. At
     * least Name or Description must be provided.
     * 
     *
     * @param updateQuickConnectNameRequest
     * @return Result of the UpdateQuickConnectName operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateQuickConnectName
     * @see AWS API Documentation
     */
    default UpdateQuickConnectNameResponse updateQuickConnectName(UpdateQuickConnectNameRequest updateQuickConnectNameRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates the name and description of a quick connect. The request accepts the following data in JSON format. At
     * least Name or Description must be provided.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateQuickConnectNameRequest.Builder} avoiding the
     * need to create one manually via {@link UpdateQuickConnectNameRequest#builder()}
     * 
     *
     * @param updateQuickConnectNameRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateQuickConnectNameRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateQuickConnectName operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateQuickConnectName
     * @see AWS API Documentation
     */
    default UpdateQuickConnectNameResponse updateQuickConnectName(
            Consumer updateQuickConnectNameRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return updateQuickConnectName(UpdateQuickConnectNameRequest.builder().applyMutation(updateQuickConnectNameRequest)
                .build());
    }

    /**
     * 
     * Whether agents with this routing profile will have their routing order calculated based on time since their
     * last inbound contact or longest idle time.
     * 
     *
     * @param updateRoutingProfileAgentAvailabilityTimerRequest
     * @return Result of the UpdateRoutingProfileAgentAvailabilityTimer operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateRoutingProfileAgentAvailabilityTimer
     * @see AWS API Documentation
     */
    default UpdateRoutingProfileAgentAvailabilityTimerResponse updateRoutingProfileAgentAvailabilityTimer(
            UpdateRoutingProfileAgentAvailabilityTimerRequest updateRoutingProfileAgentAvailabilityTimerRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Whether agents with this routing profile will have their routing order calculated based on time since their
     * last inbound contact or longest idle time.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the
     * {@link UpdateRoutingProfileAgentAvailabilityTimerRequest.Builder} avoiding the need to create one manually via
     * {@link UpdateRoutingProfileAgentAvailabilityTimerRequest#builder()}
     * 
     *
     * @param updateRoutingProfileAgentAvailabilityTimerRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateRoutingProfileAgentAvailabilityTimerRequest.Builder}
     *        to create a request.
     * @return Result of the UpdateRoutingProfileAgentAvailabilityTimer operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateRoutingProfileAgentAvailabilityTimer
     * @see AWS API Documentation
     */
    default UpdateRoutingProfileAgentAvailabilityTimerResponse updateRoutingProfileAgentAvailabilityTimer(
            Consumer updateRoutingProfileAgentAvailabilityTimerRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateRoutingProfileAgentAvailabilityTimer(UpdateRoutingProfileAgentAvailabilityTimerRequest.builder()
                .applyMutation(updateRoutingProfileAgentAvailabilityTimerRequest).build());
    }

    /**
     * 
     * Updates the channels that agents can handle in the Contact Control Panel (CCP) for a routing profile.
     * 
     *
     * @param updateRoutingProfileConcurrencyRequest
     * @return Result of the UpdateRoutingProfileConcurrency operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateRoutingProfileConcurrency
     * @see AWS API Documentation
     */
    default UpdateRoutingProfileConcurrencyResponse updateRoutingProfileConcurrency(
            UpdateRoutingProfileConcurrencyRequest updateRoutingProfileConcurrencyRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates the channels that agents can handle in the Contact Control Panel (CCP) for a routing profile.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateRoutingProfileConcurrencyRequest.Builder}
     * avoiding the need to create one manually via {@link UpdateRoutingProfileConcurrencyRequest#builder()}
     * 
     *
     * @param updateRoutingProfileConcurrencyRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateRoutingProfileConcurrencyRequest.Builder} to
     *        create a request.
     * @return Result of the UpdateRoutingProfileConcurrency operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateRoutingProfileConcurrency
     * @see AWS API Documentation
     */
    default UpdateRoutingProfileConcurrencyResponse updateRoutingProfileConcurrency(
            Consumer updateRoutingProfileConcurrencyRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateRoutingProfileConcurrency(UpdateRoutingProfileConcurrencyRequest.builder()
                .applyMutation(updateRoutingProfileConcurrencyRequest).build());
    }

    /**
     * 
     * Updates the default outbound queue of a routing profile.
     * 
     *
     * @param updateRoutingProfileDefaultOutboundQueueRequest
     * @return Result of the UpdateRoutingProfileDefaultOutboundQueue operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateRoutingProfileDefaultOutboundQueue
     * @see AWS API Documentation
     */
    default UpdateRoutingProfileDefaultOutboundQueueResponse updateRoutingProfileDefaultOutboundQueue(
            UpdateRoutingProfileDefaultOutboundQueueRequest updateRoutingProfileDefaultOutboundQueueRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates the default outbound queue of a routing profile.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the
     * {@link UpdateRoutingProfileDefaultOutboundQueueRequest.Builder} avoiding the need to create one manually via
     * {@link UpdateRoutingProfileDefaultOutboundQueueRequest#builder()}
     * 
     *
     * @param updateRoutingProfileDefaultOutboundQueueRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateRoutingProfileDefaultOutboundQueueRequest.Builder}
     *        to create a request.
     * @return Result of the UpdateRoutingProfileDefaultOutboundQueue operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateRoutingProfileDefaultOutboundQueue
     * @see AWS API Documentation
     */
    default UpdateRoutingProfileDefaultOutboundQueueResponse updateRoutingProfileDefaultOutboundQueue(
            Consumer updateRoutingProfileDefaultOutboundQueueRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateRoutingProfileDefaultOutboundQueue(UpdateRoutingProfileDefaultOutboundQueueRequest.builder()
                .applyMutation(updateRoutingProfileDefaultOutboundQueueRequest).build());
    }

    /**
     * 
     * Updates the name and description of a routing profile. The request accepts the following data in JSON format. At
     * least Name or Description must be provided.
     * 
     *
     * @param updateRoutingProfileNameRequest
     * @return Result of the UpdateRoutingProfileName operation returned by the service.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateRoutingProfileName
     * @see AWS API Documentation
     */
    default UpdateRoutingProfileNameResponse updateRoutingProfileName(
            UpdateRoutingProfileNameRequest updateRoutingProfileNameRequest) throws DuplicateResourceException,
            InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates the name and description of a routing profile. The request accepts the following data in JSON format. At
     * least Name or Description must be provided.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateRoutingProfileNameRequest.Builder} avoiding
     * the need to create one manually via {@link UpdateRoutingProfileNameRequest#builder()}
     * 
     *
     * @param updateRoutingProfileNameRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateRoutingProfileNameRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateRoutingProfileName operation returned by the service.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateRoutingProfileName
     * @see AWS API Documentation
     */
    default UpdateRoutingProfileNameResponse updateRoutingProfileName(
            Consumer updateRoutingProfileNameRequest) throws DuplicateResourceException,
            InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateRoutingProfileName(UpdateRoutingProfileNameRequest.builder().applyMutation(updateRoutingProfileNameRequest)
                .build());
    }

    /**
     * 
     * Updates the properties associated with a set of queues for a routing profile.
     * 
     *
     * @param updateRoutingProfileQueuesRequest
     * @return Result of the UpdateRoutingProfileQueues operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateRoutingProfileQueues
     * @see AWS API Documentation
     */
    default UpdateRoutingProfileQueuesResponse updateRoutingProfileQueues(
            UpdateRoutingProfileQueuesRequest updateRoutingProfileQueuesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates the properties associated with a set of queues for a routing profile.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateRoutingProfileQueuesRequest.Builder} avoiding
     * the need to create one manually via {@link UpdateRoutingProfileQueuesRequest#builder()}
     * 
     *
     * @param updateRoutingProfileQueuesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateRoutingProfileQueuesRequest.Builder} to create
     *        a request.
     * @return Result of the UpdateRoutingProfileQueues operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateRoutingProfileQueues
     * @see AWS API Documentation
     */
    default UpdateRoutingProfileQueuesResponse updateRoutingProfileQueues(
            Consumer updateRoutingProfileQueuesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateRoutingProfileQueues(UpdateRoutingProfileQueuesRequest.builder()
                .applyMutation(updateRoutingProfileQueuesRequest).build());
    }

    /**
     * 
     * Updates a rule for the specified Amazon Connect instance.
     * 
     * 
     * Use the Rules
     * Function language to code conditions for the rule.
     * 
     *
     * @param updateRuleRequest
     * @return Result of the UpdateRule operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateRule
     * @see AWS API
     *      Documentation
     */
    default UpdateRuleResponse updateRule(UpdateRuleRequest updateRuleRequest) throws InvalidRequestException,
            ResourceNotFoundException, InternalServiceException, ThrottlingException, AccessDeniedException,
            ResourceConflictException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates a rule for the specified Amazon Connect instance.
     * 
     * 
     * Use the Rules
     * Function language to code conditions for the rule.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateRuleRequest.Builder} avoiding the need to
     * create one manually via {@link UpdateRuleRequest#builder()}
     * 
     *
     * @param updateRuleRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateRuleRequest.Builder} to create a request.
     * @return Result of the UpdateRule operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateRule
     * @see AWS API
     *      Documentation
     */
    default UpdateRuleResponse updateRule(Consumer updateRuleRequest) throws InvalidRequestException,
            ResourceNotFoundException, InternalServiceException, ThrottlingException, AccessDeniedException,
            ResourceConflictException, AwsServiceException, SdkClientException, ConnectException {
        return updateRule(UpdateRuleRequest.builder().applyMutation(updateRuleRequest).build());
    }

    /**
     * 
     * Updates a security profile.
     * 
     * 
     * For information about security profiles, see Security Profiles
     * in the Amazon Connect Administrator Guide. For a mapping of the API name and user interface name of the
     * security profile permissions, see List of security profile
     * permissions.
     * 
     *
     * @param updateSecurityProfileRequest
     * @return Result of the UpdateSecurityProfile operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateSecurityProfile
     * @see AWS
     *      API Documentation
     */
    default UpdateSecurityProfileResponse updateSecurityProfile(UpdateSecurityProfileRequest updateSecurityProfileRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates a security profile.
     * 
     * 
     * For information about security profiles, see Security Profiles
     * in the Amazon Connect Administrator Guide. For a mapping of the API name and user interface name of the
     * security profile permissions, see List of security profile
     * permissions.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateSecurityProfileRequest.Builder} avoiding the
     * need to create one manually via {@link UpdateSecurityProfileRequest#builder()}
     * 
     *
     * @param updateSecurityProfileRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateSecurityProfileRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateSecurityProfile operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateSecurityProfile
     * @see AWS
     *      API Documentation
     */
    default UpdateSecurityProfileResponse updateSecurityProfile(
            Consumer updateSecurityProfileRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return updateSecurityProfile(UpdateSecurityProfileRequest.builder().applyMutation(updateSecurityProfileRequest).build());
    }

    /**
     * 
     * Updates details about a specific task template in the specified Amazon Connect instance. This operation does not
     * support partial updates. Instead it does a full update of template content.
     * 
     *
     * @param updateTaskTemplateRequest
     * @return Result of the UpdateTaskTemplate operation returned by the service.
     * @throws PropertyValidationException
     *         The property is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateTaskTemplate
     * @see AWS
     *      API Documentation
     */
    default UpdateTaskTemplateResponse updateTaskTemplate(UpdateTaskTemplateRequest updateTaskTemplateRequest)
            throws PropertyValidationException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            ServiceQuotaExceededException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates details about a specific task template in the specified Amazon Connect instance. This operation does not
     * support partial updates. Instead it does a full update of template content.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateTaskTemplateRequest.Builder} avoiding the
     * need to create one manually via {@link UpdateTaskTemplateRequest#builder()}
     * 
     *
     * @param updateTaskTemplateRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateTaskTemplateRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateTaskTemplate operation returned by the service.
     * @throws PropertyValidationException
     *         The property is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws ServiceQuotaExceededException
     *         The service quota has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateTaskTemplate
     * @see AWS
     *      API Documentation
     */
    default UpdateTaskTemplateResponse updateTaskTemplate(Consumer updateTaskTemplateRequest)
            throws PropertyValidationException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            ServiceQuotaExceededException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateTaskTemplate(UpdateTaskTemplateRequest.builder().applyMutation(updateTaskTemplateRequest).build());
    }

    /**
     * 
     * Updates the traffic distribution for a given traffic distribution group.
     * 
     * 
     * 
     * The SignInConfig distribution is available only on a default TrafficDistributionGroup
     * (see the IsDefault parameter in the TrafficDistributionGroup data type). If you call UpdateTrafficDistribution with a modified
     * SignInConfig and a non-default TrafficDistributionGroup, an
     * InvalidRequestException is returned.
     * 
     * 
     * 
     * For more information about updating a traffic distribution group, see Update
     * telephony traffic distribution across Amazon Web Services Regions  in the Amazon Connect Administrator
     * Guide.
     * 
     *
     * @param updateTrafficDistributionRequest
     * @return Result of the UpdateTrafficDistribution operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateTrafficDistribution
     * @see AWS API Documentation
     */
    default UpdateTrafficDistributionResponse updateTrafficDistribution(
            UpdateTrafficDistributionRequest updateTrafficDistributionRequest) throws InvalidRequestException,
            AccessDeniedException, ResourceNotFoundException, ResourceConflictException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates the traffic distribution for a given traffic distribution group.
     * 
     * 
     * 
     * The SignInConfig distribution is available only on a default TrafficDistributionGroup
     * (see the IsDefault parameter in the TrafficDistributionGroup data type). If you call UpdateTrafficDistribution with a modified
     * SignInConfig and a non-default TrafficDistributionGroup, an
     * InvalidRequestException is returned.
     * 
     * 
     * 
     * For more information about updating a traffic distribution group, see Update
     * telephony traffic distribution across Amazon Web Services Regions  in the Amazon Connect Administrator
     * Guide.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateTrafficDistributionRequest.Builder} avoiding
     * the need to create one manually via {@link UpdateTrafficDistributionRequest#builder()}
     * 
     *
     * @param updateTrafficDistributionRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateTrafficDistributionRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateTrafficDistribution operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceConflictException
     *         A resource already has that name.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateTrafficDistribution
     * @see AWS API Documentation
     */
    default UpdateTrafficDistributionResponse updateTrafficDistribution(
            Consumer updateTrafficDistributionRequest) throws InvalidRequestException,
            AccessDeniedException, ResourceNotFoundException, ResourceConflictException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateTrafficDistribution(UpdateTrafficDistributionRequest.builder()
                .applyMutation(updateTrafficDistributionRequest).build());
    }

    /**
     * 
     * Assigns the specified hierarchy group to the specified user.
     * 
     *
     * @param updateUserHierarchyRequest
     * @return Result of the UpdateUserHierarchy operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateUserHierarchy
     * @see AWS
     *      API Documentation
     */
    default UpdateUserHierarchyResponse updateUserHierarchy(UpdateUserHierarchyRequest updateUserHierarchyRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Assigns the specified hierarchy group to the specified user.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateUserHierarchyRequest.Builder} avoiding the
     * need to create one manually via {@link UpdateUserHierarchyRequest#builder()}
     * 
     *
     * @param updateUserHierarchyRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateUserHierarchyRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateUserHierarchy operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateUserHierarchy
     * @see AWS
     *      API Documentation
     */
    default UpdateUserHierarchyResponse updateUserHierarchy(
            Consumer updateUserHierarchyRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return updateUserHierarchy(UpdateUserHierarchyRequest.builder().applyMutation(updateUserHierarchyRequest).build());
    }

    /**
     * 
     * Updates the name of the user hierarchy group.
     * 
     *
     * @param updateUserHierarchyGroupNameRequest
     * @return Result of the UpdateUserHierarchyGroupName operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateUserHierarchyGroupName
     * @see AWS API Documentation
     */
    default UpdateUserHierarchyGroupNameResponse updateUserHierarchyGroupName(
            UpdateUserHierarchyGroupNameRequest updateUserHierarchyGroupNameRequest) throws InvalidRequestException,
            InvalidParameterException, DuplicateResourceException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates the name of the user hierarchy group.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateUserHierarchyGroupNameRequest.Builder}
     * avoiding the need to create one manually via {@link UpdateUserHierarchyGroupNameRequest#builder()}
     * 
     *
     * @param updateUserHierarchyGroupNameRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateUserHierarchyGroupNameRequest.Builder} to
     *        create a request.
     * @return Result of the UpdateUserHierarchyGroupName operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateUserHierarchyGroupName
     * @see AWS API Documentation
     */
    default UpdateUserHierarchyGroupNameResponse updateUserHierarchyGroupName(
            Consumer updateUserHierarchyGroupNameRequest)
            throws InvalidRequestException, InvalidParameterException, DuplicateResourceException, ResourceNotFoundException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateUserHierarchyGroupName(UpdateUserHierarchyGroupNameRequest.builder()
                .applyMutation(updateUserHierarchyGroupNameRequest).build());
    }

    /**
     * 
     * Updates the user hierarchy structure: add, remove, and rename user hierarchy levels.
     * 
     *
     * @param updateUserHierarchyStructureRequest
     * @return Result of the UpdateUserHierarchyStructure operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateUserHierarchyStructure
     * @see AWS API Documentation
     */
    default UpdateUserHierarchyStructureResponse updateUserHierarchyStructure(
            UpdateUserHierarchyStructureRequest updateUserHierarchyStructureRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ResourceInUseException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates the user hierarchy structure: add, remove, and rename user hierarchy levels.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateUserHierarchyStructureRequest.Builder}
     * avoiding the need to create one manually via {@link UpdateUserHierarchyStructureRequest#builder()}
     * 
     *
     * @param updateUserHierarchyStructureRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateUserHierarchyStructureRequest.Builder} to
     *        create a request.
     * @return Result of the UpdateUserHierarchyStructure operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateUserHierarchyStructure
     * @see AWS API Documentation
     */
    default UpdateUserHierarchyStructureResponse updateUserHierarchyStructure(
            Consumer updateUserHierarchyStructureRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ResourceInUseException,
            ThrottlingException, InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateUserHierarchyStructure(UpdateUserHierarchyStructureRequest.builder()
                .applyMutation(updateUserHierarchyStructureRequest).build());
    }

    /**
     * 
     * Updates the identity information for the specified user.
     * 
     * 
     * 
     * We strongly recommend limiting who has the ability to invoke UpdateUserIdentityInfo. Someone with
     * that ability can change the login credentials of other users by changing their email address. This poses a
     * security risk to your organization. They can change the email address of a user to the attacker's email address,
     * and then reset the password through email. For more information, see Best Practices
     * for Security Profiles in the Amazon Connect Administrator Guide.
     * 
     * 
     *
     * @param updateUserIdentityInfoRequest
     * @return Result of the UpdateUserIdentityInfo operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateUserIdentityInfo
     * @see AWS API Documentation
     */
    default UpdateUserIdentityInfoResponse updateUserIdentityInfo(UpdateUserIdentityInfoRequest updateUserIdentityInfoRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates the identity information for the specified user.
     * 
     * 
     * 
     * We strongly recommend limiting who has the ability to invoke UpdateUserIdentityInfo. Someone with
     * that ability can change the login credentials of other users by changing their email address. This poses a
     * security risk to your organization. They can change the email address of a user to the attacker's email address,
     * and then reset the password through email. For more information, see Best Practices
     * for Security Profiles in the Amazon Connect Administrator Guide.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateUserIdentityInfoRequest.Builder} avoiding the
     * need to create one manually via {@link UpdateUserIdentityInfoRequest#builder()}
     * 
     *
     * @param updateUserIdentityInfoRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateUserIdentityInfoRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateUserIdentityInfo operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateUserIdentityInfo
     * @see AWS API Documentation
     */
    default UpdateUserIdentityInfoResponse updateUserIdentityInfo(
            Consumer updateUserIdentityInfoRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return updateUserIdentityInfo(UpdateUserIdentityInfoRequest.builder().applyMutation(updateUserIdentityInfoRequest)
                .build());
    }

    /**
     * 
     * Updates the phone configuration settings for the specified user.
     * 
     *
     * @param updateUserPhoneConfigRequest
     * @return Result of the UpdateUserPhoneConfig operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateUserPhoneConfig
     * @see AWS
     *      API Documentation
     */
    default UpdateUserPhoneConfigResponse updateUserPhoneConfig(UpdateUserPhoneConfigRequest updateUserPhoneConfigRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates the phone configuration settings for the specified user.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateUserPhoneConfigRequest.Builder} avoiding the
     * need to create one manually via {@link UpdateUserPhoneConfigRequest#builder()}
     * 
     *
     * @param updateUserPhoneConfigRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateUserPhoneConfigRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateUserPhoneConfig operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateUserPhoneConfig
     * @see AWS
     *      API Documentation
     */
    default UpdateUserPhoneConfigResponse updateUserPhoneConfig(
            Consumer updateUserPhoneConfigRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return updateUserPhoneConfig(UpdateUserPhoneConfigRequest.builder().applyMutation(updateUserPhoneConfigRequest).build());
    }

    /**
     * 
     * Updates the properties associated with the proficiencies of a user.
     * 
     *
     * @param updateUserProficienciesRequest
     * @return Result of the UpdateUserProficiencies operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateUserProficiencies
     * @see AWS API Documentation
     */
    default UpdateUserProficienciesResponse updateUserProficiencies(UpdateUserProficienciesRequest updateUserProficienciesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates the properties associated with the proficiencies of a user.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateUserProficienciesRequest.Builder} avoiding
     * the need to create one manually via {@link UpdateUserProficienciesRequest#builder()}
     * 
     *
     * @param updateUserProficienciesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateUserProficienciesRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateUserProficiencies operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateUserProficiencies
     * @see AWS API Documentation
     */
    default UpdateUserProficienciesResponse updateUserProficiencies(
            Consumer updateUserProficienciesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return updateUserProficiencies(UpdateUserProficienciesRequest.builder().applyMutation(updateUserProficienciesRequest)
                .build());
    }

    /**
     * 
     * Assigns the specified routing profile to the specified user.
     * 
     *
     * @param updateUserRoutingProfileRequest
     * @return Result of the UpdateUserRoutingProfile operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateUserRoutingProfile
     * @see AWS API Documentation
     */
    default UpdateUserRoutingProfileResponse updateUserRoutingProfile(
            UpdateUserRoutingProfileRequest updateUserRoutingProfileRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Assigns the specified routing profile to the specified user.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateUserRoutingProfileRequest.Builder} avoiding
     * the need to create one manually via {@link UpdateUserRoutingProfileRequest#builder()}
     * 
     *
     * @param updateUserRoutingProfileRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateUserRoutingProfileRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateUserRoutingProfile operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateUserRoutingProfile
     * @see AWS API Documentation
     */
    default UpdateUserRoutingProfileResponse updateUserRoutingProfile(
            Consumer updateUserRoutingProfileRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        return updateUserRoutingProfile(UpdateUserRoutingProfileRequest.builder().applyMutation(updateUserRoutingProfileRequest)
                .build());
    }

    /**
     * 
     * Assigns the specified security profiles to the specified user.
     * 
     *
     * @param updateUserSecurityProfilesRequest
     * @return Result of the UpdateUserSecurityProfiles operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateUserSecurityProfiles
     * @see AWS API Documentation
     */
    default UpdateUserSecurityProfilesResponse updateUserSecurityProfiles(
            UpdateUserSecurityProfilesRequest updateUserSecurityProfilesRequest) throws InvalidRequestException,
            InvalidParameterException, ResourceNotFoundException, ThrottlingException, InternalServiceException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Assigns the specified security profiles to the specified user.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateUserSecurityProfilesRequest.Builder} avoiding
     * the need to create one manually via {@link UpdateUserSecurityProfilesRequest#builder()}
     * 
     *
     * @param updateUserSecurityProfilesRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateUserSecurityProfilesRequest.Builder} to create
     *        a request.
     * @return Result of the UpdateUserSecurityProfiles operation returned by the service.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws ThrottlingException
     *         The throttling limit has been exceeded.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateUserSecurityProfiles
     * @see AWS API Documentation
     */
    default UpdateUserSecurityProfilesResponse updateUserSecurityProfiles(
            Consumer updateUserSecurityProfilesRequest)
            throws InvalidRequestException, InvalidParameterException, ResourceNotFoundException, ThrottlingException,
            InternalServiceException, AwsServiceException, SdkClientException, ConnectException {
        return updateUserSecurityProfiles(UpdateUserSecurityProfilesRequest.builder()
                .applyMutation(updateUserSecurityProfilesRequest).build());
    }

    /**
     * 
     * Updates the view content of the given view identifier in the specified Amazon Connect instance.
     * 
     * 
     * It performs content validation if Status is set to SAVED and performs full content
     * validation if Status is PUBLISHED. Note that the $SAVED alias' content
     * will always be updated, but the $LATEST alias' content will only be updated if
     * Status is PUBLISHED.
     * 
     *
     * @param updateViewContentRequest
     * @return Result of the UpdateViewContent operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateViewContent
     * @see AWS API
     *      Documentation
     */
    default UpdateViewContentResponse updateViewContent(UpdateViewContentRequest updateViewContentRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            InternalServiceException, TooManyRequestsException, ResourceInUseException, AwsServiceException, SdkClientException,
            ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates the view content of the given view identifier in the specified Amazon Connect instance.
     * 
     * 
     * It performs content validation if Status is set to SAVED and performs full content
     * validation if Status is PUBLISHED. Note that the $SAVED alias' content
     * will always be updated, but the $LATEST alias' content will only be updated if
     * Status is PUBLISHED.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateViewContentRequest.Builder} avoiding the need
     * to create one manually via {@link UpdateViewContentRequest#builder()}
     * 
     *
     * @param updateViewContentRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateViewContentRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateViewContent operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateViewContent
     * @see AWS API
     *      Documentation
     */
    default UpdateViewContentResponse updateViewContent(Consumer updateViewContentRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            InternalServiceException, TooManyRequestsException, ResourceInUseException, AwsServiceException, SdkClientException,
            ConnectException {
        return updateViewContent(UpdateViewContentRequest.builder().applyMutation(updateViewContentRequest).build());
    }

    /**
     * 
     * Updates the view metadata. Note that either Name or Description must be provided.
     * 
     *
     * @param updateViewMetadataRequest
     * @return Result of the UpdateViewMetadata operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateViewMetadata
     * @see AWS
     *      API Documentation
     */
    default UpdateViewMetadataResponse updateViewMetadata(UpdateViewMetadataRequest updateViewMetadataRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            InternalServiceException, TooManyRequestsException, DuplicateResourceException, ResourceInUseException,
            AwsServiceException, SdkClientException, ConnectException {
        throw new UnsupportedOperationException();
    }

    /**
     * 
     * Updates the view metadata. Note that either Name or Description must be provided.
     * 
     * 

     * 
     * This is a convenience which creates an instance of the {@link UpdateViewMetadataRequest.Builder} avoiding the
     * need to create one manually via {@link UpdateViewMetadataRequest#builder()}
     * 
     *
     * @param updateViewMetadataRequest
     *        A {@link Consumer} that will call methods on
     *        {@link software.amazon.awssdk.services.connect.model.UpdateViewMetadataRequest.Builder} to create a
     *        request.
     * @return Result of the UpdateViewMetadata operation returned by the service.
     * @throws AccessDeniedException
     *         You do not have sufficient permissions to perform this action.
     * @throws InvalidRequestException
     *         The request is not valid.
     * @throws InvalidParameterException
     *         One or more of the specified parameters are not valid.
     * @throws ResourceNotFoundException
     *         The specified resource was not found.
     * @throws InternalServiceException
     *         Request processing failed because of an error or failure with the service.
     * @throws TooManyRequestsException
     *         Displayed when rate-related API limits are exceeded.
     * @throws DuplicateResourceException
     *         A resource with the specified name already exists.
     * @throws ResourceInUseException
     *         That resource is already in use. Please try another.
     * @throws SdkException
     *         Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
     *         catch all scenarios.
     * @throws SdkClientException
     *         If any client side error occurs such as an IO related failure, failure to get credentials, etc.
     * @throws ConnectException
     *         Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
     * @sample ConnectClient.UpdateViewMetadata
     * @see AWS
     *      API Documentation
     */
    default UpdateViewMetadataResponse updateViewMetadata(Consumer updateViewMetadataRequest)
            throws AccessDeniedException, InvalidRequestException, InvalidParameterException, ResourceNotFoundException,
            InternalServiceException, TooManyRequestsException, DuplicateResourceException, ResourceInUseException,
            AwsServiceException, SdkClientException, ConnectException {
        return updateViewMetadata(UpdateViewMetadataRequest.builder().applyMutation(updateViewMetadataRequest).build());
    }

    /**
     * Create a {@link ConnectClient} with the region loaded from the
     * {@link software.amazon.awssdk.regions.providers.DefaultAwsRegionProviderChain} and credentials loaded from the
     * {@link software.amazon.awssdk.auth.credentials.DefaultCredentialsProvider}.
     */
    static ConnectClient create() {
        return builder().build();
    }

    /**
     * Create a builder that can be used to configure and create a {@link ConnectClient}.
     */
    static ConnectClientBuilder builder() {
        return new DefaultConnectClientBuilder();
    }

    static ServiceMetadata serviceMetadata() {
        return ServiceMetadata.of(SERVICE_METADATA_ID);
    }

    @Override
    default ConnectServiceClientConfiguration serviceClientConfiguration() {
        throw new UnsupportedOperationException();
    }
}