e.neo4j.tests.3.5.8.54.source-code.neo4j.conf Maven / Gradle / Ivy

Go to download
Show more of this group Show more artifacts with this name
Show all versions of tests Show documentation
Tools for testing Neo4j-related and GraphAware-related code
There is a newer version: 4.2.0.58
################################################################
# GraphAware configuration
################################################################

#*****************************************************************
# Neo4j configuration
#*****************************************************************

# The name of the database to mount
#dbms.active_database=graph.db

# Paths of directories in the installation.
#dbms.directories.data=data
#dbms.directories.plugins=plugins
#dbms.directories.certificates=certificates

# This setting constrains all `LOAD CSV` import files to be under the `import` directory. Remove or uncomment it to
# allow files to be loaded from anywhere in filesystem; this introduces possible security problems. See the `LOAD CSV`
# section of the manual for details.
dbms.directories.import=import

# Whether requests to Neo4j are authenticated.
# To disable authentication, uncomment this line
dbms.security.auth_enabled=false

# Enable this to be able to upgrade a store from an older version.
#dbms.allow_format_migration=true

# The amount of memory to use for mapping the store files, in bytes (or
# kilobytes with the 'k' suffix, megabytes with 'm' and gigabytes with 'g').
# If Neo4j is running on a dedicated server, then it is generally recommended
# to leave about 2-4 gigabytes for the operating system, give the JVM enough
# heap to hold all your transaction state and query context, and then leave the
# rest for the page cache.
# The default page cache memory assumes the machine is dedicated to running
# Neo4j, and is heuristically set to 50% of RAM minus the max Java heap size.
#dbms.memory.pagecache.size=10g

# Enable online backups to be taken from this database.
dbms.backup.enabled=false

# To allow remote backups, uncomment this line:
#dbms.backup.address=0.0.0.0:6362

#*****************************************************************
# Network connector configuration
#*****************************************************************

# Bolt connector
dbms.connector.bolt.type=BOLT
dbms.connector.bolt.enabled=true
dbms.connector.bolt.tls_level=OPTIONAL
# To have Bolt accept non-local connections, uncomment this line
# dbms.connector.bolt.address=0.0.0.0:7687

# HTTP Connector
dbms.connector.http.type=HTTP
dbms.connector.http.enabled=true
#dbms.connector.http.encryption=NONE
# To have HTTP accept non-local connections, uncomment this line
#dbms.connector.http.address=0.0.0.0:7474

# HTTPS Connector
dbms.connector.https.type=HTTP
dbms.connector.https.enabled=true
dbms.connector.https.encryption=TLS
dbms.connector.https.address=localhost:7573

# Number of Neo4j worker threads.
#dbms.threads.worker_count=

#*****************************************************************
# Logging configuration
#*****************************************************************

# To enable HTTP logging, uncomment this line
#dbms.logs.http.enabled=true

# To enable GC Logging, uncomment this line
#dbms.logs.gc.enabled=true

# GC Logging Options
# see http://docs.oracle.com/cd/E19957-01/819-0084-10/pt_tuningjava.html#wp57013 for more information.
#dbms.logs.gc.options=-XX:+PrintGCDetails -XX:+PrintGCDateStamps -XX:+PrintGCApplicationStoppedTime -XX:+PrintPromotionFailure -XX:+PrintTenuringDistribution

# Number of GC logs to keep.
#dbms.logs.gc.rotation.keep_number=5

# Size of each GC log that is kept.
#dbms.logs.gc.rotation.size=20m

# Size threshold for rotation of the debug log. If set to zero then no rotation will occur. Accepts a binary suffix "k",
# "m" or "g".
#dbms.logs.debug.rotation.size=20m

# Maximum number of history files for the internal log.
#dbms.logs.debug.rotation.keep_number=7

# Log executed queries that takes longer than the configured threshold. Enable by uncommenting this line.
#dbms.logs.query.enabled=true

# If the execution of query takes more time than this threshold, the query is logged. If set to zero then all queries
# are logged.
#dbms.logs.query.threshold=0

# The file size in bytes at which the query log will auto-rotate. If set to zero then no rotation will occur. Accepts a
# binary suffix "k", "m" or "g".
#dbms.logs.query.rotation.size=20m

# Maximum number of history files for the query log.
#dbms.logs.query.rotation.keep_number=7

#*****************************************************************
# HA configuration
#*****************************************************************

# Uncomment and specify these lines for running Neo4j in High Availability mode.
# See the High availability setup tutorial for more details on these settings
# http://neo4j.com/docs/3.3.4/ha-setup-tutorial.html

# Database mode
# Allowed values:
# HA - High Availability
# SINGLE - Single mode, default.
# To run in High Availability mode uncomment this line:
#dbms.mode=HA

# ha.server_id is the number of each instance in the HA cluster. It should be
# an integer (e.g. 1), and should be unique for each cluster instance.
#ha.server_id=

# ha.initial_hosts is a comma-separated list (without spaces) of the host:port
# where the ha.host.coordination of all instances will be listening. Typically
# this will be the same for all cluster instances.
#ha.initial_hosts=127.0.0.1:5001,127.0.0.1:5002,127.0.0.1:5003

# IP and port for this instance to listen on, for communicating cluster status
# information iwth other instances (also see ha.initial_hosts). The IP
# must be the configured IP address for one of the local interfaces.
#ha.host.coordination=127.0.0.1:5001

# IP and port for this instance to listen on, for communicating transaction
# data with other instances (also see ha.initial_hosts). The IP
# must be the configured IP address for one of the local interfaces.
#ha.host.data=127.0.0.1:6001

# The interval at which slaves will pull updates from the master. Comment out
# the option to disable periodic pulling of updates. Unit is seconds.
ha.pull_interval=10

# Amount of slaves the master will try to push a transaction to upon commit
# (default is 1). The master will optimistically continue and not fail the
# transaction even if it fails to reach the push factor. Setting this to 0 will
# increase write performance when writing through master but could potentially
# lead to branched data (or loss of transaction) if the master goes down.
#ha.tx_push_factor=1

# Strategy the master will use when pushing data to slaves (if the push factor
# is greater than 0). There are three options available "fixed_ascending" (default),
# "fixed_descending" or "round_robin". Fixed strategies will start by pushing to
# slaves ordered by server id (accordingly with qualifier) and are useful when
# planning for a stable fail-over based on ids.
#ha.tx_push_strategy=fixed_ascending

# Policy for how to handle branched data.
#ha.branched_data_policy=keep_all

# How often heartbeat messages should be sent. Defaults to ha.default_timeout.
#ha.heartbeat_interval=5s

# Timeout for heartbeats between cluster members. Should be at least twice that of ha.heartbeat_interval.
#ha.heartbeat_timeout=11s

# If you are using a load-balancer that doesn't support HTTP Auth, you may need to turn off authentication for the
# HA HTTP status endpoint by uncommenting the following line.
#dbms.security.ha_status_auth_enabled=false

# Whether this instance should only participate as slave in cluster. If set to
# true, it will never be elected as master.
#ha.slave_only=false

#*****************************************************************
# Miscellaneous configuration
#*****************************************************************

# Enable this to specify a parser other than the default one.
#cypher.default_language_version=3.0

# Determines if Cypher will allow using file URLs when loading data using
# `LOAD CSV`. Setting this value to `false` will cause Neo4j to fail `LOAD CSV`
# clauses that load data from the file system.
#dbms.security.allow_csv_import_from_file_urls=true

# Retention policy for transaction logs needed to perform recovery and backups.
#dbms.tx_log.rotation.retention_policy=7 days

# Limit the number of IOs the background checkpoint process will consume per second.
# This setting is advisory, is ignored in Neo4j Community Edition, and is followed to
# best effort in Enterprise Edition.
# An IO is in this case a 8 KiB (mostly sequential) write. Limiting the write IO in
# this way will leave more bandwidth in the IO subsystem to service random-read IOs,
# which is important for the response time of queries when the database cannot fit
# entirely in memory. The only drawback of this setting is that longer checkpoint times
# may lead to slightly longer recovery times in case of a database or system crash.
# A lower number means lower IO pressure, and consequently longer checkpoint times.
# The configuration can also be commented out to remove the limitation entirely, and
# let the checkpointer flush data as fast as the hardware will go.
# Set this to -1 to disable the IOPS limit.
# dbms.checkpoint.iops.limit=1000

# Enable a remote shell server which Neo4j Shell clients can log in to.
#dbms.shell.enabled=true
# The network interface IP the shell will listen on (use 0.0.0.0 for all interfaces).
#dbms.shell.host=127.0.0.1
# The port the shell will listen on, default is 1337.
#dbms.shell.port=1337

# Only allow read operations from this Neo4j instance. This mode still requires
# write access to the directory for lock purposes.
#dbms.read_only=false

# Comma separated list of JAX-RS packages containing JAX-RS resources, one
# package name for each mountpoint. The listed package names will be loaded
# under the mountpoints specified. Uncomment this line to mount the
# org.neo4j.examples.server.unmanaged.HelloWorldResource.java from
# neo4j-server-examples under /examples/unmanaged, resulting in a final URL of
# http://localhost:7474/examples/unmanaged/helloworld/{nodeId}
#dbms.unmanaged_extension_classes=org.neo4j.examples.server.unmanaged=/examples/unmanaged