.unboundid-ldapsdk-minimal-edition.3.0.0.source-code.unboundid-ldapsdk-util.properties Maven / Gradle / Ivy
# Copyright 2008-2015 UnboundID Corp.
# All Rights Reserved.
# Copyright (C) 2008-2015 UnboundID Corp.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License (GPLv2 only)
# or the terms of the GNU Lesser General Public License (LGPLv2.1 only)
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see .
# The fully-qualified name of the class to create.
class.name=com.unboundid.util.UtilityMessages
ERR_BASE32_DECODE_INVALID_LENGTH=A base32-encoded string must have a length \
that is a multiple of 8 bytes.
ERR_BASE32_DECODE_UNEXPECTED_EQUAL=Unexpected equal sign found at position \
{0,number,0}.
ERR_BASE32_DECODE_UNEXPECTED_CHAR=Invalid character ''{0}'' encountered.
ERR_BASE64_DECODE_INVALID_LENGTH=A base64-encoded string must have a length \
that is a multiple of 4 bytes.
ERR_BASE64_DECODE_UNEXPECTED_EQUAL=Unexpected equal sign found at position \
{0,number,0}.
ERR_BASE64_DECODE_UNEXPECTED_CHAR=Invalid character ''{0}'' encountered.
ERR_BASE64_URLDECODE_INVALID_LENGTH=The provided string did not have a valid \
length for base64url-encoded data.
ERR_GENTIME_DECODE_CANNOT_PARSE_TZ=Unable to parse time zone information from \
the provided timestamp ''{0}''.
ERR_GENTIME_CANNOT_PARSE_INVALID_LENGTH=Unable to parse the provided \
timestamp ''{0}'' because it had an invalid number of characters before the \
sub-second and/or time zone portion.
ERR_NO_EXCEPTION=No Exception
ERR_DECODE_UUID_INVALID_LENGTH=Unable to decode bytes ''{0}'' as a valid \
UUID because the length of the provided content was not exactly 128 bits.
ERR_BS_BUFFER_OFFSET_NEGATIVE=The provided offset {0,number,0} is negative.
ERR_BS_BUFFER_LENGTH_NEGATIVE=The provided length {0,number,0} is negative.
ERR_BS_BUFFER_OFFSET_PLUS_LENGTH_TOO_LARGE=The provided offset {0,number,0} \
plus the provided length {1,number,0} is greater than the size of the \
provided array ({2,number,0}).
ERR_BS_BUFFER_POS_NEGATIVE=The provided position {0,number,0} is negative.
ERR_BS_BUFFER_POS_TOO_LARGE=The provided position {0,number,0} is greater \
than the length of the buffer ({1,number,0}).
ERR_BS_BUFFER_ARRAY_NULL=The provided array is null.
ERR_BS_BUFFER_BYTE_STRING_NULL=The provided byte string is null.
ERR_BS_BUFFER_BUFFER_NULL=The provided buffer is null.
ERR_BS_BUFFER_CHAR_SEQUENCE_NULL=The provided character sequence is null.
ERR_BS_BUFFER_CAPACITY_NEGATIVE=The provided capacity {0,number,0} is negative.
INFO_CL_TOOL_DESCRIPTION_HELP=Display usage information for this program.
INFO_CL_TOOL_DESCRIPTION_VERSION=Display version information for this program.
INFO_CL_TOOL_LABEL_EXAMPLES=Examples
INFO_LDAP_TOOL_PLACEHOLDER_HOST={host}
INFO_LDAP_TOOL_DESCRIPTION_HOST=The IP address or resolvable name to use to \
connect to the directory server. If this is not provided, then a default \
value of 'localhost' will be used.
INFO_LDAP_TOOL_PLACEHOLDER_PORT={port}
INFO_LDAP_TOOL_DESCRIPTION_PORT=The port to use to connect to the directory \
server. If this is not provided, then a default value of 389 will be used.
INFO_LDAP_TOOL_PLACEHOLDER_DN={dn}
INFO_LDAP_TOOL_DESCRIPTION_BIND_DN=The DN to use to bind to the directory \
server when performing simple authentication.
INFO_LDAP_TOOL_PLACEHOLDER_PASSWORD={password}
INFO_LDAP_TOOL_DESCRIPTION_BIND_PW=The password to use to bind to the \
directory server when performing simple authentication or a password-based \
SASL mechanism.
INFO_LDAP_TOOL_PLACEHOLDER_PATH={path}
INFO_LDAP_TOOL_DESCRIPTION_BIND_PW_FILE=The path to the file containing the \
password to use to bind to the directory server when performing simple \
authentication or a password-based \
SASL mechanism.
INFO_LDAP_TOOL_DESCRIPTION_BIND_PW_PROMPT=Indicates that the tool should \
interactively prompt the user for the bind password.
INFO_LDAP_TOOL_DESCRIPTION_USE_SSL=Use SSL when communicating with the \
directory server.
INFO_LDAP_TOOL_DESCRIPTION_USE_START_TLS=Use StartTLS when communicating with \
the directory server.
INFO_LDAP_TOOL_DESCRIPTION_TRUST_ALL=Trust any certificate presented by the \
directory server.
INFO_LDAP_TOOL_DESCRIPTION_KEY_STORE_PATH=The path to the file to use as the \
key store for obtaining client certificates when communicating securely \
with the directory server.
INFO_LDAP_TOOL_DESCRIPTION_KEY_STORE_PASSWORD=The password to use to access \
the key store contents.
INFO_LDAP_TOOL_DESCRIPTION_KEY_STORE_PASSWORD_FILE=The path to the file \
containing the password to use to access the key store contents.
INFO_LDAP_TOOL_DESCRIPTION_KEY_STORE_PASSWORD_PROMPT=Indicates that the tool \
should interactively prompt the user for the password to use to access the \
key store contents.
INFO_LDAP_TOOL_PLACEHOLDER_FORMAT={format}
INFO_LDAP_TOOL_DESCRIPTION_KEY_STORE_FORMAT=The format (e.g., jks, jceks, \
pkcs12, etc.) for the key store file.
INFO_LDAP_TOOL_DESCRIPTION_TRUST_STORE_PATH=The path to the file to use as \
trust store when determining whether to trust a certificate presented by \
the directory server.
INFO_LDAP_TOOL_DESCRIPTION_TRUST_STORE_PASSWORD=The password to use to access \
the trust store contents.
INFO_LDAP_TOOL_DESCRIPTION_TRUST_STORE_PASSWORD_FILE=The path to the file \
containing the password to use to access the trust store contents.
INFO_LDAP_TOOL_DESCRIPTION_TRUST_STORE_PASSWORD_PROMPT=Indicates that the \
tool should interactively prompt the user for the password to use to access \
the trust store contents.
INFO_LDAP_TOOL_DESCRIPTION_TRUST_STORE_FORMAT=The format (e.g., jks, jceks, \
pkcs12, etc.) for the trust store file.
INFO_LDAP_TOOL_PLACEHOLDER_CERT_NICKNAME={nickname}
INFO_LDAP_TOOL_DESCRIPTION_CERT_NICKNAME=The nickname (alias) of the \
client certificate in the key store to present to the directory server for \
SSL client authentication.
INFO_LDAP_TOOL_PLACEHOLDER_SASL_OPTION={name=value}
INFO_LDAP_TOOL_DESCRIPTION_SASL_OPTION=A name-value pair providing \
information to use when performing SASL authentication.
ERR_LDAP_TOOL_HOST_PORT_COUNT_MISMATCH=If either the ''--{0}'' or ''--{1}'' \
arguments are provided multiple times, then both arguments must be provided \
the same number of times.
ERR_LDAP_TOOL_MALFORMED_SASL_OPTION=SASL option ''{0}'' is invalid. SASL \
options must be in the form ''name=value''.
ERR_LDAP_TOOL_NO_SASL_MECH=One or more SASL options were provided, but the \
''mech'' option was not given to indicate which SASL mechanism to use.
ERR_LDAP_TOOL_UNSUPPORTED_SASL_MECH=SASL mechanism ''{0}'' is not supported.
ERR_LDAP_TOOL_MISSING_REQUIRED_SASL_OPTION=SASL option ''{0}'' is required \
for use with the {1} mechanism.
ERR_LDAP_TOOL_INVALID_SASL_OPTION=SASL option ''{0}'' cannot be used with the \
{1} mechanism.
ERR_LDAP_TOOL_CANNOT_CREATE_SSL_SOCKET_FACTORY=Unable to create the SSL \
socket factory to use for secure communication with the server: {0}
ERR_LDAP_TOOL_CANNOT_CREATE_SSL_CONTEXT=Unable to create the SSL context to \
for StartTLS communication with the server: {0}
ERR_LDAP_TOOL_START_TLS_FAILED=StartTLS negotiation failed: {0}
ERR_LDAP_TOOL_CANNOT_READ_KEY_STORE_PASSWORD=Unable to read the key store \
password: {0}
INFO_LDAP_TOOL_ENTER_KEY_STORE_PASSWORD=Enter the key store password:
ERR_LDAP_TOOL_CANNOT_CREATE_KEY_MANAGER=Unable to create the key manager for \
secure communication: {0}
ERR_LDAP_TOOL_CANNOT_READ_TRUST_STORE_PASSWORD=Unable to read the trust store \
password: {0}
INFO_LDAP_TOOL_ENTER_TRUST_STORE_PASSWORD=Enter the trust store password:
ERR_LDAP_TOOL_CANNOT_READ_BIND_PASSWORD=Unable to read the bind password: {0}
INFO_LDAP_TOOL_ENTER_BIND_PASSWORD=Enter the bind password:
ERR_VALUE_PATTERN_UNMATCHED_OPEN=The provided value pattern string contained \
an unmatched opening brace at position {0,number,0}.
ERR_VALUE_PATTERN_UNMATCHED_CLOSE=The provided value pattern string contained \
an unmatched closing brace at position {0,number,0}.
ERR_VALUE_PATTERN_EMPTY_LOWER_BOUND=The provided value pattern string \
contained a numeric range starting at position {0,number,0} which contained \
a zero-length lower bound.
ERR_VALUE_PATTERN_EMPTY_UPPER_BOUND=The provided value pattern string \
contained a numeric range starting at position {0,number,0} which contained \
a zero-length upper bound.
ERR_VALUE_PATTERN_EMPTY_INCREMENT=The provided value pattern string contained \
a numeric range starting at position {0,number,0} which contained a \
zero-length increment.
ERR_VALUE_PATTERN_EMPTY_FORMAT=The provided value pattern string contained \
a numeric range starting at position {0,number,0} which contained a \
zero-length format string.
ERR_VALUE_PATTERN_VALUE_NOT_LONG=The provided value pattern string contained \
a numeric range starting at position {0,number,0} with a value that is \
outside the acceptable range. Values must be between {1,number,0} and \
{2,number,0}.
ERR_VALUE_PATTERN_INVALID_CHARACTER=The provided value pattern string \
contained an invalid character ''{0}'' at position {1,number,0}.
ERR_VALUE_PATTERN_NO_DELIMITER=The provided value pattern string contained a \
numeric range starting at position {0,number,0} which did not contain \
either a dash or colon to separate the lower bound from the upper bound.
ERR_VALIDATOR_NULL_CHECK_FAILURE=A null object was provided where a non-null \
object is required (non-null index {0,number,0}). Thread stack trace: {1}
ERR_VALIDATOR_TRUE_CHECK_FAILURE=A result of false was found for a condition \
which the LDAP SDK requires to be true. Thread stack trace {0}
ERR_VALIDATOR_FALSE_CHECK_FAILURE=A result of true was found for a condition \
which the LDAP SDK requires to be false. Thread stack trace {0}
ERR_VALIDATOR_FAILURE_CUSTOM_MESSAGE={0}. Thread stack trace: {1}
INFO_NUM_DAYS_SINGULAR={0,number,0} day
INFO_NUM_DAYS_PLURAL={0,number,0} days
INFO_NUM_HOURS_SINGULAR={0,number,0} hour
INFO_NUM_HOURS_PLURAL={0,number,0} hours
INFO_NUM_MINUTES_SINGULAR={0,number,0} minute
INFO_NUM_MINUTES_PLURAL={0,number,0} minutes
INFO_NUM_SECONDS_SINGULAR={0,number,0} second
INFO_NUM_SECONDS_PLURAL={0,number,0} seconds
INFO_NUM_SECONDS_WITH_DECIMAL={0} seconds
INFO_COLUMN_LABEL_TIMESTAMP=Timestamp
ERR_VALUE_PATTERN_COMPONENT_EMPTY_FILE=The specified file does not \
contain any data.
ERR_FILE_VALUE_PATTERN_NOT_USABLE=Unable to access data in file ''{0}'' for \
use in the value pattern: {1}
ERR_HTTP_VALUE_PATTERN_NOT_USABLE=Unable to access data from ''{0}'' for use \
in the value pattern: {1}
ERR_FIXED_ARRAY_OS_WRITE_BEYOND_END=Attempted to write beyond the end of the \
array backing the output stream
ERR_REF_VALUE_PATTERN_NOT_VALID=The provided value pattern string contained \
a back-reference component with an invalid value of ''{0}''.
ERR_REF_VALUE_PATTERN_ZERO_INDEX=The provided value pattern string contained \
a back-reference component with an index of zero. Back-reference indexes \
should start with one rather than zero.
ERR_REF_VALUE_PATTERN_INVALID_INDEX=The provided value pattern string \
contained a back-reference component with an index of ''{0}'', but there \
are not that many components to reference at that point in the pattern.
ERR_ARG_STRING_DANGLING_BACKSLASH=The provided string cannot be parsed as an \
argument list because it ends with a backslash that was not immediately \
preceded by another backslash. The backslash character will be considered \
an escape to indicate that the next character should be included as-is with \
no interpretation.
ERR_ARG_STRING_UNMATCHED_QUOTE=The provided string cannot be parsed as an \
argument list because it has an unmatched quote starting at or near \
position {0}.
ERR_TEST_ENTRY_MISSING=Entry ''{0}'' does not exist in the server.
ERR_TEST_ATTR_MISSING=Entry ''{0}'' exists but does not have any values for \
attribute ''{1}''.
ERR_TEST_VALUE_MISSING=Entry ''{0}'' exists and contains attribute ''{1}'', \
but that attribute does not include value ''{2}''.
ERR_TEST_ATTR_MISSING_VALUE=Entry ''{0}'' exists and contains attribute \
''{1}'' with value(s) {2}, but does not include expected value(s) {3}.
ERR_TEST_ENTRY_EXISTS=Entry ''{0}'' was found in the server but was expected \
to be missing.
ERR_TEST_ATTR_EXISTS=Entry ''{0}'' was found to contain attribute ''{1}'' \
when that attribute was expected to be missing.
ERR_TEST_ATTR_EXISTS_WITH_VALUES=Entry ''{0}'' was found to contain attribute \
''{1}'' with value(s) {2} when that attribute was expected to be missing.
ERR_TEST_VALUE_EXISTS=Entry ''{0}'' was found to contain attribute ''{1}'' \
with value ''{2}'' when that value was expected to be missing.
ERR_TEST_ENTRY_DOES_NOT_MATCH_FILTER=Entry ''{0}'' was found to exist in the \
server but does not match expected filter ''{1}''.
ERR_TEST_SINGLE_RESULT_CODE_MISSING=Result {0} did not have the expected \
result code of ''{1}''.
ERR_TEST_MULTI_RESULT_CODE_MISSING=Result {0} did not have any of the \
acceptable result codes {1}.
ERR_TEST_PROCESSING_SINGLE_RESULT_CODE_MISSING=Result {0} received from \
processing request {1} did not have the expected result code of {2}.
ERR_TEST_PROCESSING_MULTI_RESULT_CODE_MISSING=Result {0} received from \
processing request {1} did not have any of the acceptable result codes {2}.
ERR_TEST_SINGLE_RESULT_CODE_FOUND=Result {0} had an unacceptable result code \
of ''{1}''.
ERR_TEST_MULTI_RESULT_CODE_FOUND=Result {0} had one of the unacceptable \
result codes {1}.
ERR_TEST_PROCESSING_SINGLE_RESULT_CODE_FOUND=Result {0} received from \
processing request {1} had an unacceptable result code of ''{2}''.
ERR_TEST_PROCESSING_MULTI_RESULT_CODE_FOUND=Result {0} received from \
processing request {1} had one of the unacceptable result codes {2}.
ERR_TEST_RESULT_MISSING_MATCHED_DN=Result {0} was expected to contain a \
matched DN but none was found.
ERR_TEST_RESULT_CONTAINS_MATCHED_DN=Result {0} was not expected to contain a \
matched DN but a value of ''{1}'' was found.
ERR_TEST_RESULT_MISSING_EXPECTED_MATCHED_DN=Result {0} was expected to \
contain a matched DN of ''{1}'' but none was found.
ERR_TEST_MATCHED_DN_MISMATCH=Result {0} was expected to contain a matched DN \
value of ''{1}'' but ''{0}'' was found instead.
ERR_TEST_RESULT_MISSING_REFERRAL=Result {0} was expected to have at least one \
referral URL but did not contain any.
ERR_TEST_RESULT_HAS_REFERRAL=Result {0} was not expected to have any referral \
URLs but one or more were found.
ERR_TEST_RESULT_MISSING_CONTROL=Result {0} was expected to have at least one \
control with OID ''{1}'' but none was found.
ERR_TEST_ENTRY_MISSING_CONTROL=Search result entry {0} was expected to have \
at least one control with OID ''{1}'' but none was found.
ERR_TEST_REF_MISSING_CONTROL=Search result reference {0} was expected to have \
at least one control with OID ''{1}'' but none was found.
ERR_TEST_RESULT_HAS_CONTROL=Result {0} was not expected to have any control \
with OID ''{1}'' but one was found.
ERR_TEST_ENTRY_HAS_CONTROL=Search result entry {0} was not expected to have \
any control with OID ''{1}'' but one was found.
ERR_TEST_REF_HAS_CONTROL=Search result reference {0} was not expected to have \
any control with OID ''{1}'' but one was found.
ERR_TEST_SEARCH_NO_ENTRIES_RETURNED=The search was expected to have returned \
one or more entries, but result {0} indicates that none were returned.
ERR_TEST_SEARCH_ENTRY_NOT_RETURNED=The search with result {0} was expected to \
have returned entry ''{1}'', but either was not included in the set of \
entries that were returned, or a search result listener was used for the \
search that makes it impossible to determine what entries were returned.
ERR_TEST_SEARCH_ENTRIES_RETURNED=The search was not expected to have returned \
any entries, but result {0} indicates that the number of entries returned \
was {1}.
ERR_TEST_SEARCH_ENTRY_COUNT_MISMATCH_ONE_EXPECTED=The search was expected to \
have returned one entry, but result {0} indicates that the number of \
entries returned was {1}.
ERR_TEST_SEARCH_ENTRY_COUNT_MISMATCH_MULTI_EXPECTED=The search was expected \
to have returned {0} entries, but result {1} indicates that the number of \
entries returned was {2}.
ERR_TEST_SEARCH_NO_REFS_RETURNED=The search was expected to have returned one \
or more references, but result {0} indicates that none were returned.
ERR_TEST_SEARCH_REFS_RETURNED=The search was not expected to have returned \
any references, but result {0} indicates that the number of references \
returned was {1}.
ERR_TEST_SEARCH_REF_COUNT_MISMATCH_ONE_EXPECTED=The search was expected to \
have returned one reference, but result {0} indicates that the number of \
references returned was {1}.
ERR_TEST_SEARCH_REF_COUNT_MISMATCH_MULTI_EXPECTED=The search was expected to \
have returned {0} references, but result {1} indicates that the number of \
references returned was {2}.
ERR_AGGREGATE_INPUT_STREAM_MARK_NOT_SUPPORTED=The aggregate input stream does \
not support the use of mark and reset functionality.
INFO_SASL_ANONYMOUS_DESCRIPTION=A mechanism that can be used to destroy an \
existing authentication session, or to perform a bind without actually \
authenticating but optionally including a trace string that may help \
provide information about the client.
INFO_SASL_ANONYMOUS_OPTION_TRACE=A trace string that may be used to provide \
additional information about the client performing the bind. Note, \
however, that because the client is not providing any proof of its \
identity, it is not possible to determine the validity of any trace \
information given.
INFO_SASL_CRAM_MD5_DESCRIPTION=A mechanism that can be used to perform \
password-based authentication in a manner that prevents an observer from \
discovering the password by generating an MD5 digest based on the \
provided password and additional information, including random data \
provided by the server.
INFO_SASL_CRAM_MD5_OPTION_AUTH_ID=A string which identifies the user that is \
trying to authenticate. The value is typically in the form "dn:" followed \
by the DN of the target user's entry, or "u:" followed by the username for \
the target user.
INFO_SASL_DIGEST_MD5_DESCRIPTION=A mechanism that can be used to perform \
password-based authentication in a manner that prevents an observer from \
discovering the password by generating an MD5 digest based on the \
provided password and additional information, including random data \
provided by both the client and the server.
INFO_SASL_DIGEST_MD5_OPTION_AUTH_ID=A string which identifies the user that \
is trying to authenticate. The value is typically in the form "dn:" \
followed by the DN of the target user's entry, or "u:" followed by the \
username for the target user.
INFO_SASL_DIGEST_MD5_OPTION_AUTHZ_ID=A string which identifies the user under \
whose authority subsequent operations should be processed. If this is not \
provided, then no alternate authorization identity will be used.
INFO_SASL_DIGEST_MD5_OPTION_REALM=The realm for the user trying to \
authenticate. If this is not provided, then no realm will be specified in \
the bind request.
INFO_SASL_DIGEST_MD5_OPTION_QOP=The quality of protection that should be used \
for any communication that occurs after the authentication has completed. \
Allowed values are 'auth' (for just authentication with no communication \
protection), 'auth-int' (for integrity protection for communication, which \
does not encrypt but ensures that the communication cannot be imperceptibly \
altered by a man in the middle attack), and 'auth-conf' (for \
confidentiality protection for communication, which encrypts the \
communication so that it cannot be deciphered by a third-party observer). \
If no value is specified, then a default of 'auth' will be assumed. If any \
of multiple qualities of protection will be considered acceptable then the \
permissible QoP values may be separated by commas and listed in order from \
most desirable to least desirable.
INFO_SASL_EXTERNAL_DESCRIPTION=A mechanism that can allow the client to \
authenticate to the server using information that the server may have about \
the client which was not provided in the form of an LDAP message (e.g., \
a client certificate that was presented during an SSL or StartTLS handshake).
INFO_SASL_GSSAPI_DESCRIPTION=A mechanism that can allow the client to \
authenticate to the server using Kerberos V. It may be possible to \
leverage an existing Kerberos session or to authenticate using a \
newly-created session.
INFO_SASL_GSSAPI_OPTION_AUTH_ID=A string which identifies the user that is \
trying to authenticate. This should generally be the user's Kerberos \
principal.
INFO_SASL_GSSAPI_OPTION_AUTHZ_ID=A string which identifies the user under \
whose authority subsequent operations should be processed. If this is not \
provided, then no alternate authorization identity will be used.
INFO_SASL_GSSAPI_OPTION_CONFIG_FILE=The path to a file containing the JAAS \
configuration that will be used for Kerberos processing. if this is not \
specified then an automatically-generated JAAS configuration will be used.
INFO_SASL_GSSAPI_OPTION_DEBUG=Indicates whether JAAS and Kerberos processing \
debug information may be written to standard error.
INFO_SASL_GSSAPI_OPTION_KDC_ADDRESS=The address of the Kerberos KDC that \
should be used during authentication processing. If this is not provided, \
then an attempt will be made to determine the appropriate KDC address from \
the underlying system configuration.
INFO_SASL_GSSAPI_OPTION_PROTOCOL=The name of the protocol used in the \
directory server's service principal. If this is not provided, then a \
default protocol of "ldap" will be used.
INFO_SASL_GSSAPI_OPTION_REALM=The name of the Kerberos realm in which the \
authentication will be processed. if this is not provided, then an \
attempt will be made to determine the appropriate realm from the underlying \
system configuration.
INFO_SASL_GSSAPI_OPTION_QOP=The quality of protection that should be used \
for any communication that occurs after the authentication has completed. \
Allowed values are 'auth' (for just authentication with no communication \
protection), 'auth-int' (for integrity protection for communication, which \
does not encrypt but ensures that the communication cannot be imperceptibly \
altered by a man in the middle attack), and 'auth-conf' (for \
confidentiality protection for communication, which encrypts the \
communication so that it cannot be deciphered by a third-party observer). \
If no value is specified, then a default of 'auth' will be assumed. If any \
of multiple qualities of protection will be considered acceptable then the \
permissible QoP values may be separated by commas and listed in order from \
most desirable to least desirable.
INFO_SASL_GSSAPI_OPTION_RENEW_TGT=Indicates whether to attempt to renew the \
client's Kerberos ticket-granting ticket if authentication succeeds using \
an existing Kerberos session. If this is not provided, then no attempt \
will be made to renew the TGT.
INFO_SASL_GSSAPI_OPTION_REQUIRE_TICKET_CACHE=Indicates whether the client \
will be required to have an existing Kerberos session that will be used \
for the authentication rather than using a newly-created session. This \
option will only be examined if a ticket cache should be used during \
authentication processing. If this is not provided, then an existing \
Kerberos session will not be required.
INFO_SASL_GSSAPI_OPTION_TICKET_CACHE=Specifies the path to a ticket cache \
file that should be used to look for an existing Kerberos session. This \
option will only be examined if a ticket cache should be used during \
authentication processing. If this is not provided, then the default \
ticket cache file path will be used.
INFO_SASL_GSSAPI_OPTION_USE_TICKET_CACHE=Indicates whether to attempt to use \
a ticket cache in order to determine whether the user has an existing \
Kerberos session that may be used instead of using a newly-created session.
INFO_SASL_PLAIN_DESCRIPTION=A mechanism that can allow the client to perform \
password-based authentication, optionally using an alternate authorization \
identity.
INFO_SASL_PLAIN_OPTION_AUTH_ID=A string which identifies the user that is \
trying to authenticate. The value is typically in the from "dn:" followed \
by the DN of the target user's entry, or "u:" followed by the username for \
the target user.
INFO_SASL_PLAIN_OPTION_AUTHZ_ID=A string which idnetifies the user under \
whose authority subsequent operations should be processed. If this is not \
provided, then no alternate authorization identity will be used.
ERR_SASL_OPTION_MISSING_EQUAL=Unable to parse string ''{0}'' as a SASL \
option because it is missing an equal sign to separate the name from the \
value.
ERR_SASL_OPTION_STARTS_WITH_EQUAL=Unable to parse string ''{0}'' as a SASL \
option because it does not have an option name before the equal sign.
ERR_SASL_OPTION_NOT_MULTI_VALUED=SASL option ''{0}'' was provided multiple \
times.
ERR_SASL_OPTION_MECH_CONFLICT=Conflicting SASL mechanisms ''{0}'' and ''{1}'' \
were specified.
ERR_SASL_OPTION_NO_MECH=No SASL mechanism was specified.
ERR_SASL_OPTION_UNSUPPORTED_MECH=Unsupported SASL mechanism ''{0}''.
ERR_SASL_OPTION_MECH_DOESNT_ACCEPT_PASSWORD=A password was provided, but \
SASL mechanism {0} does not accept a password.
ERR_SASL_OPTION_MECH_REQUIRES_PASSWORD=SASL mechanism {0} requires a password \
but none was provided.
ERR_SASL_OPTION_GSSAPI_PASSWORD_REQUIRED=A password must be provided for a \
GSSAPI bind unless useTicketCache=true and requireCache=true options are \
provided.
ERR_SASL_OPTION_UNSUPPORTED_FOR_MECH=SASL option ''{0}'' is not supported \
with the {1} mechanism.
ERR_SASL_MISSING_REQUIRED_OPTION=SASL option ''{0}'' is required with the \
{1} mechanism but was not provided.
ERR_SASL_OPTION_MALFORMED_BOOLEAN_VALUE=SASL option ''{0}'' must have a value \
of either ''true'' or ''false''.
ERR_MULTI_LDAP_TOOL_PREFIXES_AND_SUFFIXES_NULL=The sets of server name \
prefixes and server name suffixes must not both be null.
ERR_MULTI_LDAP_TOOL_PREFIXES_AND_SUFFIXES_EMPTY=If non-null, the sets of \
server name prefixes and server name suffixes must not be empty.
ERR_MULTI_LDAP_TOOL_PREFIXES_AND_SUFFIXES_MISMATCH=If both the sets of server \
name prefixes and server name suffixes are non-null, they must have the \
same number of elements.
ERR_COMMAND_LINE_TOOL_SHUTDOWN_HOOK_NOT_IMPLEMENTED=A shutdown hook was \
invoked for command-line tool ''{0}'' but the doShutdownHookProcessing \
method has not been implemented for that tool. This method must be \
overridden and implemented for all tools that override the \
registerShutdownHook method to return true.
ERR_TEST_VALUE_NOT_VALID_DN=The provided string value ''{0}'' does not \
represent a valid LDAP distinguished name: {1}
ERR_TEST_DNS_NOT_EQUAL=The provided DN values ''{0}'' and ''{1}'' are not \
equal.
ERR_PW_READER_FAILURE=An error occurred while attempting to read a password \
from the terminal: {0}
INFO_RATE_ADJUSTOR_VARIABLE_RATE_DATA_ARG_DESCRIPTION=The path to a file \
containing information that can be used to cause the tool to vary the \
target rate over time. Use the {0} argument to generate a sample rate \
definition file with comments that describe the required format for this \
file.
INFO_RATE_ADJUSTOR_GENERATE_SAMPLE_RATE_FILE_ARG_DESCRIPTION=The path to a \
sample variable data rate file that should be generated. This file will \
contain comments that describe the expected format for the file to use \
with the {0} argument.
ERR_RATE_ADJUSTOR_INVALID_KEYS=The header included the following invalid \
keys: {0}. The supported keys are {1}.
ERR_RATE_ADJUSTOR_MISSING_FORMAT=The rate input did not include a value for \
the ''{0}'' property in the header. This key is required, and must have one \
of these values: {1}. All header lines must appear at the beginning of \
the file and must take the form ''{2} key=value''.
ERR_RATE_ADJUSTOR_INVALID_FORMAT=The rate input included an invalid \
value, ''{0}'', for the ''{1}'' property in the header. This key must \
have one of these values: {2}.
ERR_RATE_ADJUSTOR_INVALID_DEFAULT_DURATION=Default duration ''{0}'' could not \
be parsed as a duration value: {1}
ERR_RATE_ADJUSTOR_INVALID_LINE=Input line ''{0}'' has an invalid format. All \
non-empty, non-comment lines must take the form ''absolute-rate-per-second, \
duration'' (e.g., ''1000, 1m'') or ''relative-rate, duration'' \
(e.g., ''2.5X, 1d''), where the rate is a multiplier on the baseline rate \
per second. The duration can be omitted if a {1} value is provided in the \
header
ERR_RATE_ADJUSTOR_INVALID_RATE=Rate ''{0}'' from input line ''{1}'' could not \
be parsed as a floating point value
ERR_RATE_ADJUSTOR_RELATIVE_RATE_WITHOUT_BASELINE=Rate ''{0}'' from \
input line ''{1}'' specified a relative rate. This is not supported because \
the target rate per second was not provided (e.g., using the \
''--ratePerSecond'' command-line argument).
ERR_RATE_ADJUSTOR_INVALID_DURATION=Duration ''{0}'' from input line ''{1}'' \
could not be parsed as a duration value: {2}
ERR_RATE_ADJUSTOR_HEADER_NO_EQUAL=Header line ''{0}'' is malformed because it \
does not include an equal sign to separate the header key from its value.
ERR_RATE_ADJUSTOR_HEADER_EMPTY_KEY=Header line ''{0}'' is malformed because \
the key is an empty string.
ERR_RATE_ADJUSTOR_DUPLICATE_HEADER_KEY=Header key ''{0}'' already has a value \
of ''{1}''. Cannot also set it to ''{2}''.
ERR_RATE_ADJUSTOR_NO_END_HEADER_FOUND=Unable to find a line comprised of \
the text ''{0}'' to denote the end of the header.
© 2015 - 2025 Weber Informatics LLC | Privacy Policy