.unboundid-ldapsdk.6.0.3.source-code.unboundid-ldapsdk-log.properties Maven / Gradle / Ivy
# Copyright 2009-2021 Ping Identity Corporation
# All Rights Reserved.
#
# -----
#
# Copyright 2009-2021 Ping Identity Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# -----
#
# Copyright (C) 2009-2021 Ping Identity Corporation
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License (GPLv2 only)
# or the terms of the GNU Lesser General Public License (LGPLv2.1 only)
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see .
# The fully-qualified name of the class to create.
class.name=com.unboundid.ldap.sdk.unboundidds.logs.LogMessages
ERR_LOG_MESSAGE_NO_TIMESTAMP=The log message string does not appear to start \
with a timestamp.
ERR_LOG_MESSAGE_INVALID_TIMESTAMP=The log message string does not appear to \
start with a valid timestamp: {0}
ERR_LOG_MESSAGE_INVALID_ESCAPED_CHARACTER=The log message string appears to \
contain an invalid escaped character in token ''{0}'' because it contains a \
backslash not followed by two hexadecimal digits.
ERR_LOG_MESSAGE_INVALID_REQUEST_OPERATION_TYPE=The log message string appears \
to contain an operation request but did not have a recognized operation type.
ERR_LOG_MESSAGE_INVALID_RESULT_OPERATION_TYPE=The log message string appears \
to contain an operation result but did not have a recognized operation type.
ERR_LOG_MESSAGE_INVALID_FORWARD_OPERATION_TYPE=The log message string appears \
to contain n forwarded operation but did not have a recognized operation \
type.
ERR_LOG_MESSAGE_INVALID_FORWARD_FAILED_OPERATION_TYPE=The log message string \
appears to contain a failed forwarded operation but did not have a \
recognized operation type.
ERR_LOG_MESSAGE_INVALID_ASSURANCE_COMPLETE_OPERATION_TYPE=The log message \
string appears to contain information about an operation for which \
replication assurance processing had been completed, but the message did \
not have a recognized operation type.
ERR_LOG_MESSAGE_INVALID_ACCESS_MESSAGE_TYPE=The log message string does not \
include a recognized access log message type.
ERR_AUDIT_LOG_MESSAGE_LIST_NULL=Unable to create an audit log message from a \
log message line list that is null.
ERR_AUDIT_LOG_MESSAGE_LIST_EMPTY=Unable to create an audit log message from a \
log message line list that is empty.
ERR_AUDIT_LOG_MESSAGE_LIST_CONTAINS_EMPTY_LINE=Unable to create an audit log \
message from a log message line list that contains an empty line.
ERR_AUDIT_LOG_MESSAGE_LIST_DOES_NOT_START_WITH_COMMENT=Unable to create an \
audit log message from a log message line list that does not start with a \
comment line that represents the log message header.
ERR_AUDIT_LOG_MESSAGE_LIST_CANNOT_PARSE_HEADER=Unable to create an audit log \
message from the provided log message line list because the first line in \
that list (''{0}'') cannot be parsed as a valid audit log message header: \
{1}
ERR_AUDIT_LOG_MESSAGE_HEADER_NO_SEMICOLONS=The header line does not contain \
any semicolons to separate header elements.
ERR_AUDIT_LOG_MESSAGE_HEADER_MALFORMED_TIMESTAMP=Unable to parse the first \
element of the header line as a timestamp.
ERR_AUDIT_LOG_MESSAGE_HEADER_ENDS_WITH_PROPERTY_NAME=The header line ends \
with what appears to be a partial or complete property name (''{0}'') with \
no equal sign to denote the start of the property value.
ERR_AUDIT_LOG_MESSAGE_HEADER_EMPTY_PROPERTY_NAME=The header line contains an \
equal sign after a property delimiter, indicating a property with an empty \
name.
ERR_AUDIT_LOG_MESSAGE_ERROR_READING_JSON_OBJECT=An error occurred while trying \
to read the value of property ''{0}'' as a JSON object: {1}
ERR_AUDIT_LOG_MESSAGE_END_BEFORE_CLOSING_QUOTE=Unable to read the quoted \
string value of property ''{0}'' because the end of the string was reached \
before finding the closing quote.
ERR_AUDIT_LOG_MESSAGE_END_BEFORE_ESCAPED=Unable to read the string value of \
property ''{0}'' because the end of the string was reached immediately \
after a backslash that was expected to escape the next character.
ERR_AUDIT_LOG_MESSAGE_END_BEFORE_HEX=Unable to read the string value of \
property ''{0}'' because the end of the string was reached before finding \
both hexadecimal digits following the octothorpe (#) character.
ERR_AUDIT_LOG_MESSAGE_INVALID_HEX_DIGIT=Unable to read the string value of \
property ''{0}'' because the value contained an octothorpe (#) character \
that was not immediately followed by two valid hexadecimal digits.
ERR_AUDIT_LOG_MESSAGE_UNEXPECTED_CHAR_AFTER_PROPERTY=Found unexpected \
character ''{0}'' after reading the value of property ''{1}''. Only spaces \
and a semicolon were expected.
ERR_ADD_AUDIT_LOG_MESSAGE_CHANGE_TYPE_NOT_ADD=Unable to parse the provided \
lines as an add audit log message because while the lines could be parsed \
as a valid LDIF change record, the change record had a change type of \
''{0}'' instead of the expected change type of ''{1}''.
ERR_ADD_AUDIT_LOG_MESSAGE_LINES_NOT_CHANGE_RECORD=Unable to parse the \
provided lines as an add audit log message because they could not be parsed \
as a valid LDIF change record: {0}
ERR_DELETE_AUDIT_LOG_MESSAGE_CHANGE_TYPE_NOT_DELETE=Unable to parse the \
provided lines as a delete audit log message because while the lines could \
be parsed as a valid LDIF change record, the change record had a change \
type of ''{0}'' instead of the expected change type of ''{1}''.
ERR_DELETE_AUDIT_LOG_MESSAGE_LINES_NOT_CHANGE_RECORD=Unable to parse the \
provided lines as a delete audit log message because they could not be \
parsed as a valid LDIF change record: {0}
ERR_DELETE_AUDIT_LOG_MESSAGE_SUBTREE_DELETE_WITHOUT_ENTRY=Unable to create a \
list of revert change records for the subtree delete based at entry ''{0}'' \
because that audit log message in itself does not contain enough \
information to restore the entire subtree. Further, even the base entry \
cannot be recreated because the delete audit log message is not in \
reversible form.
ERR_DELETE_AUDIT_LOG_MESSAGE_SUBTREE_DELETE_WITH_ENTRY=Unable to create a \
list of revert change records for the subtree delete based at entry ''{0}'' \
because that audit log message in itself does not contain enough \
information to restore the entire subtree. However, this record does have \
enough information to restore just the base entry, and the necessary revert \
change record can be manually obtained by creating an LDIF add change \
record from the deleted entry.
ERR_DELETE_AUDIT_LOG_MESSAGE_NO_SOFT_DELETED_ENTRY_DN=Unable to create a list \
of revert change records for the soft-delete of entry ''{0}'' because the \
audit log message did not contain the DN of the resulting soft-deleted entry.
ERR_DELETE_AUDIT_LOG_MESSAGE_DELETED_ENTRY=Unable to create a list of revert \
change records for the delete of entry ''{0}'' because the audit log \
message did not include the contents of the entry that was deleted. Make \
sure that the audit logger is configured to record changes in revertible \
form.
ERR_MODIFY_AUDIT_LOG_MESSAGE_CHANGE_TYPE_NOT_MODIFY=Unable to parse the \
provided lines as a modify audit log message because while the lines could \
be parsed as a valid LDIF change record, the change record had a change \
type of ''{0}'' instead of the expected change type of ''{1}''.
ERR_MODIFY_AUDIT_LOG_MESSAGE_LINES_NOT_CHANGE_RECORD=Unable to parse the \
provided lines as a modify audit log message because they could not be \
parsed as a valid LDIF change record: {0}
ERR_MODIFY_AUDIT_LOG_MESSAGE_MOD_NOT_REVERTIBLE=Unable to create a list of \
revert change records for the modify of entry ''{0}'' because the modify \
audit log message included modification {1} that is not revertible. Make \
sure that the audit logger is configured to record changes in reversible \
form.
ERR_MODIFY_DN_AUDIT_LOG_MESSAGE_CHANGE_TYPE_NOT_MODIFY_DN=Unable to parse the \
provided lines as a modify DN audit log message because while the lines \
could be parsed as a valid LDIF change record, the change record had a \
change type of ''{0}'' instead of the expected change type of ''{1}''.
ERR_MODIFY_DN_AUDIT_LOG_MESSAGE_LINES_NOT_CHANGE_RECORD=Unable to parse the \
provided lines as a modify DN audit log message because they could not be \
parsed as a valid LDIF change record: {0}
ERR_MODIFY_DN_NOT_REVERTIBLE=Unable to create a list of revert change records \
for the modify DN of entry ''{0}'' because the modify DN audit log message \
did not include a set of attribute modifications. Make sure that the audit \
logger is configured to record changes in reversible form.
ERR_MODIFY_DN_CANNOT_GET_NEW_DN_WITHOUT_NEW_SUPERIOR=Unable to create a list \
of revert change records for the modify DN of entry ''{0}'' because either \
the original DN or new RDN (''{1}'') could not be parsed.
ERR_MODIFY_DN_CANNOT_GET_NEW_DN_WITH_NEW_SUPERIOR=Unable to create a list of \
revert change records for the modify DN of entry ''{0}'' because at least \
one of the original DN, the new RDN (''{1}''), or the new superior DN \
(''{2}'') could not be parsed.
ERR_MODIFY_DN_CANNOT_REVERT_NULL_DN=Unable to create a list of revert change \
records for a modify DN that targets the root DSE.
ERR_MODIFY_DN_CANNOT_REVERT_WITHOUT_NECESSARY_MODS=Unable to create a list of \
revert change records for the modify DN of entry ''{0}'' because the \
log message did not include any attribute modifications, but attribute \
modifications are required to determine the correct deleteOldRDN value.
ERR_MODIFY_DN_MOD_NOT_REVERTIBLE=Unable to create a list of revert change \
records for the modify DN of entry ''{0}'' because the modify DN audit log \
message included a non-revertible {1} modification for attribute ''{2}''. \
Make sure that the audit logger is configured to record changes in \
reversible form.
ERR_AUDIT_LOG_READER_CANNOT_PARSE_CHANGE_RECORD=Unable to parse an LDIF \
change record out of the audit log message with lines {0}: {1}
ERR_AUDIT_LOG_READER_UNSUPPORTED_CHANGE_RECORD=Unable to create an audit log \
message from the data contained in lines {0} because the parsed change log \
had an unsupported change type of ''{1}''.