• Home
• edu.internet2.middleware.grouper
• grouper
• 5.11.3
• source code

×

Project download

Many resources are needed to download a project. Please understand that we have to compensate our server costs. Thank you in advance.
Project price only 1 $

You can buy this project and download/modify it how often you want.

.middleware.grouper.grouper.5.11.3.source-code.grouper.base.properties Maven / Gradle / Ivy

#
# Copyright 2014 Internet2
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

#
# Grouper Configuration
# $Id: grouper.example.properties,v 1.48 2009-12-16 06:02:30 mchyzer Exp $
#


########################################
## Config chaining hierarchy
## Grouper uses Grouper Configuration Overlays (documented on wiki)
## By default the configuration is read from grouper.base.properties
## (which should not be edited), and the grouper.properties overlays
## the base settings.  See the grouper.base.properties for the possible
## settings that can be applied to the grouper.properties
########################################

# comma separated config files that override each other (files on the right override the left)
# each should start with file: or classpath:
# e.g. classpath:grouper.example.properties, file:c:/something/myconfig.properties
# {valueType: "string", required: true, multiple: true}
grouper.config.hierarchy = classpath:grouper.base.properties, classpath:grouper.properties, database:grouper

# seconds between checking to see if the config files are updated
# {valueType: "integer", required: true}
grouper.config.secondsBetweenUpdateChecks = 600


########################################
## General settings
########################################

# used to identify your institution (e.g. in TIER instrumentation)
# {valueType: "string"}
grouper.institution.name =

# in cases where grouper is logging or emailing, it will use this to differentiate test vs dev vs prod
# {valueType: "string"}
grouper.env.name =

#put the URL which will be used e.g. in emails to users.  include the webappname at the end, and nothing after that.
#e.g. https://server.school.edu/grouper/
# {valueType: "string"}
grouper.ui.url =

# tmp dir to use, will set this to the env var for tmp dir during cache operations...
# note, if you are using a backslash, you need to escape it with another, e.g. c:\\temp
# see the temp dir in logs with this in log4j.properties
# {valueType: "string"}
grouper.tmp.dir =

# main stem for grouper built in objects
# Note: there are more locations to change than just this
# {valueType: "stem"}
grouper.rootStemForBuiltinObjects = etc

#######################################
## Inititalization and configuration settings
#######################################

#if grouper should auto init the registry if not initted (i.e. insert the root stem, built in fields, etc)
#defaults to true
# {valueType: "boolean", required: true}
registry.autoinit = true

#if grouper should try and detect and log configuration errors on startup
#in general this should be true, unless the output is too annoying or if it is causing a problem
# {valueType: "boolean", required: true}
configuration.detect.errors = true

#if the startup message should display
# {valueType: "boolean", required: true}
configuration.display.startup.message = true

#if groups like the wheel group should be auto-created for convenience (note: check config needs to be on)
# {valueType: "boolean", required: true}
configuration.autocreate.system.groups = true

# auto-create groups (increment the integer index), and auto-populate with users
#(note: check config needs to be on)
# {valueType: "group", regex: "^configuration\\.autocreate\\.group\\.name\\.[0-9]+$"}
#configuration.autocreate.group.name.0 = $$grouper.rootStemForBuiltinObjects$$:uiUsers

# auto-create group description (increment the integer index)
# {valueType: "string", regex: "^configuration\\.autocreate\\.group\\.description\\.[0-9]+$"}
#configuration.autocreate.group.description.0 = users allowed to log in to the UI

#auto-create group subject ids or identifiers, comma separated, to bootstrap the registry on startup
#  (increment the integer index)
# {valueType: "subject", multiple: true, regex: "^configuration\\.autocreate\\.group\\.subjects\\.[0-9]+$"}
#configuration.autocreate.group.subjects.0 = johnsmith

# if should check database and utf in new thread
# {valueType: "boolean", required: true}
configuration.checkDatabaseAndUtf.inNewThread = true

# if grouper should check to see if the database has case sensitive selects
# {valueType: "boolean", required: true}
configuration.detect.db.caseSensitive.problems = true

# if grouper should give a success message on case sensitive matching
# {valueType: "boolean", required: true}
configuration.display.db.caseSensitive.success.message = false

# (Deprecated) if grouper should check to see if utf-8 works on startup (both files and db). This
# property never worked as intended; instead of setting this, see the individual properties
# "configuration.detect.utf8.file.problems" and "configuration.detect.utf8.db.problems"
# {valueType: "boolean", required: false}
#configuration.detect.utf8.problems = false

# 2016/04/15 utf-8 checking doesnt work, we need to fix this before default to true
# if grouper should check to see if utf-8 works on startup in files
# {valueType: "boolean", required: true}
configuration.detect.utf8.file.problems = false

# if grouper should check that utf-8 works on startup in files
# {valueType: "boolean", required: true}
configuration.detect.utf8.db.problems = true

# if grouper should give a success message on utf8 inputs
# {valueType: "boolean", required: true}
configuration.display.utf8.success.message = false

# if grouper in the utf8 check will check to see if grouper supports transaction
# {valueType: "boolean", required: true}
configuration.detect.db.transaction.problems = true

# display a success message on transactions
# {valueType: "boolean", required: true}
configuration.display.transaction.success.message = false

# {valueType: "string", defaultValue: "jdbc"}
configuration.registrySubjectSource = jdbc

###################################
## Security settings
###################################

# If set to _true_, the ALL subject will be granted optin on
# each new group that is created.  Note, you can override the default
# checkboxes on screen of UI in media.properties.
# {valueType: "boolean", required: true}
groups.create.grant.all.optin         = false

# If set to _true_, the ALL subject will be granted optout on
# each new group that is created.  Note, you can override the default
# checkboxes on screen of UI in media.properties.
# {valueType: "boolean", required: true}
groups.create.grant.all.optout        = false

# If set to _true_, the ALL subject will be granted read on
# each new group that is created.  Note, you can override the default
# checkboxes on screen of UI in media.properties.
# {valueType: "boolean", required: true}
groups.create.grant.all.read          = false

# If set to _true_, the ALL subject will be granted view on
# each new group that is created.  Note, you can override the default
# checkboxes on screen of UI in media.properties.
# {valueType: "boolean", required: true}
groups.create.grant.all.view          = false

# If set to _true_, the ALL subject will be granted attrRead on
# each new group that is created.  Note, you can override the default
# checkboxes on screen of UI in media.properties.
# {valueType: "boolean", required: true}
groups.create.grant.all.groupAttrRead = false

# If set to _true_, the ALL subject will be granted attrUpdate on
# each new group that is created.  Note, you can override the default
# checkboxes on screen of UI in media.properties.
# {valueType: "boolean", required: true}
groups.create.grant.all.groupAttrUpdate = false

# If set to _true_, the ALL subject will be granted create on
# each new stem that is created.
# {valueType: "boolean", required: true}
stems.create.grant.all.create         = false

# If set to _true_, the ALL subject will be granted admin on
# each new stem that is created.
# {valueType: "boolean", required: true}
stems.create.grant.all.stemAdmin      = false

# If set to _true_, the ALL subject will be granted attrRead on
# each new stem that is created.
# {valueType: "boolean", required: true}
stems.create.grant.all.stemAttrRead   = false

# If set to _true_, the ALL subject will be granted attrUpdate on
# each new stem that is created.
# {valueType: "boolean", required: true}
stems.create.grant.all.stemAttrUpdate = false

# If set to _true_, the ALL subject will be granted attrAdmin on
# each new attributeDef that is created.
# {valueType: "boolean", required: true}
attributeDefs.create.grant.all.attrAdmin         = false

# If set to _true_, the ALL subject will be granted attrOptin on
# each new attributeDef that is created.
# {valueType: "boolean", required: true}
attributeDefs.create.grant.all.attrOptin         = false

# If set to _true_, the ALL subject will be granted attrOptout on
# each new attributeDef that is created.
# {valueType: "boolean", required: true}
attributeDefs.create.grant.all.attrOptout        = false

# If set to _true_, the ALL subject will be granted attrRead on
# each new attributeDef that is created.
# {valueType: "boolean", required: true}
attributeDefs.create.grant.all.attrRead          = false

# If set to _true_, the ALL subject will be granted attrUpdate on
# each new attributeDef that is created.
# {valueType: "boolean", required: true}
attributeDefs.create.grant.all.attrUpdate        = false

# If set to _true_, the ALL subject will be granted attrView on
# each new attributeDef that is created.
# {valueType: "boolean", required: true}
attributeDefs.create.grant.all.attrView          = false

# If set to _true_, the ALL subject will be granted attrDefAttrRead on
# each new attributeDef that is created.
# {valueType: "boolean", required: true}
attributeDefs.create.grant.all.attrDefAttrRead   = false

# If set to _true_, the ALL subject will be granted attrDefAttrAdmin on
# each new attributeDef that is created.
# {valueType: "boolean", required: true}
attributeDefs.create.grant.all.attrDefAttrUpdate = false

# if set to true, then the ALL subject will be granted view on new entities
# {valueType: "boolean", required: true}
entities.create.grant.all.view = false

# GRP-1664: do not add admin privileges to root or wheel when creating objects
# {valueType: "boolean", required: true}
privileges.assignAdminToWheelOrRootOnCreate = false

# GRP-1665: do not add admin privileges to inherited admins
# {valueType: "boolean", required: true}
privileges.assignAdminToInheritedAdminsOnCreate = false

# A wheel group allows you to enable non-GrouperSystem subjects to act
# like a root user when interacting with the registry.
# {valueType: "boolean", required: true}
groups.wheel.use                      = true

# Set to the name of the group you want to treat as the wheel group.
# The members of this group will be treated as root-like users.
# {valueType: "group", required: true}
groups.wheel.group                    = $$grouper.rootStemForBuiltinObjects$$:sysadmingroup

# A viewonly wheel group allows you to enable non-GrouperSystem subjects to act
# like a root user when viewing the registry.
# {valueType: "boolean", required: true}
groups.wheel.viewonly.use                      = true

# Set to the name of the group you want to treat as the viewonly wheel group.
# The members of this group will be treated as root-like users when viewing objects.
# {valueType: "group", required: true}
groups.wheel.viewonly.group                    = $$grouper.rootStemForBuiltinObjects$$:sysadminViewersGroup

# A readonly wheel group allows you to enable non-GrouperSystem subjects to act
# like a root user when reading the registry.
# {valueType: "boolean", required: true}
groups.wheel.readonly.use                      = true

# Set to the name of the group you want to treat as the readonly wheel group.
# The members of this group will be treated as root-like users when reading objects.
# {valueType: "group", required: true}
groups.wheel.readonly.group                    = $$grouper.rootStemForBuiltinObjects$$:sysadminReadersGroup


# To change the internal names for GrouperAll and GrouperSystem
# uncomment and change. Review UI nav.properties to ensure consistency
# {valueType: "string", required: true}
subject.internal.grouperall.name   = EveryEntity

# {valueType: "string", required: true}
subject.internal.groupersystem.name   = GrouperSysAdmin

# Search and sort strings for internal users
# {valueType: "string", multiple: true}
internalSubjects.searchAttribute0.el = ${subject.name},${subject.id}

# {valueType: "string"}
internalSubjects.sortAttribute0.el = ${subject.name}


#by default, anyone with admin rights on a group can edit the types or attributes
#specify types (related attributes will also be protected) which are wheel only, or restricted to a certain group
# {valueType: "boolean", required: true, regex: "^security\\.types\\.([^.]+)\\.wheelOnly$"}
#security.types.typeName.wheelOnly = true

#by default, anyone with admin rights on a group can edit the types or attributes
#specify types (related attributes will also be protected) which are wheel only, or restricted to a certain group
# {valueType: "boolean", required: true}
security.types.grouperLoader.wheelOnly = true

#by default, anyone with admin rights on a group can edit the types or attributes
#specify types (related attributes will also be protected) which are wheel only, or restricted to a certain group
# {valueType: "boolean", required: true}
security.types.grouperGroupMembershipSettings.wheelOnly = true

# if only a certain group can control the type
# {valueType: "group", required: true, regex: "^security\\.types\\.([^.]+)\\.allowOnlyGroup$"}
#security.types.typeName.allowOnlyGroup = $$grouper.rootStemForBuiltinObjects$$:someAdminGroup

# If this property is set, then to move a stem, in addition to having the appropriate stem privileges for the stem being moved and the destination stem,
# a user must also be a member of the defined group.  Note that users in the wheel group will have access regardless of this property.
# {valueType: "group", required: true}
#security.stem.groupAllowedToMoveStem = $$grouper.rootStemForBuiltinObjects$$:someAdminGroup

# If this property is set, then to rename a stem, in addition to having the appropriate stem privilege for the stem being renamed,
# a user must also be a member of the defined group.  Note that users in the wheel group will have access regardless of this property.
# {valueType: "group", required: true}
#security.stem.groupAllowedToRenameStem = $$grouper.rootStemForBuiltinObjects$$:someAdminGroup

# If this property is set, then to copy a stem, a user must be a member of the defined group.  Note that users in the wheel group will have access regardless of this property.
# {valueType: "group", required: true}
#security.stem.groupAllowedToCopyStem = $$grouper.rootStemForBuiltinObjects$$:someAdminGroup

# By default, all users have access to sort using any of the sort strings in the member table.
# You can restrict to wheel only or to a certain group.  The integer index denotes the specific string
# {valueType: "group", required: true, regex: "^security\\.member\\.sort\\.string([0-9]+)\\.allowOnlyGroup$"}
#security.member.sort.string0.allowOnlyGroup = $$grouper.rootStemForBuiltinObjects$$:someGroup

# By default, all users have access to sort using any of the sort strings in the member table.
# You can restrict to wheel only or to a certain group.  The integer index denotes the specific string
# {valueType: "boolean", required: true, regex: "^security\\.member\\.sort\\.string([0-9]+)\\.wheelOnly$"}
#security.member.sort.string0.wheelOnly = true

# By default, all users have access to search strings in the member table.
# You can restrict to wheel only or to a certain group.  The integer index denotes the specific string
# {valueType: "group", required: true, regex: "^security\\.member\\.search\\.string([0-9]+)\\.allowOnlyGroup$"}
#security.member.search.string0.allowOnlyGroup = $$grouper.rootStemForBuiltinObjects$$:someGroup

# By default, all users have access to search strings in the member table.
# You can restrict to wheel only or to a certain group.  The integer index denotes the specific string
# {valueType: "boolean", required: true, regex: "^security\\.member\\.search\\.string([0-9]+)\\.wheelOnly$"}
#security.member.search.string2.wheelOnly = true

# if all folders should be shown only if there is an object inside that the user can see (or a privilege on that folder).
# this has been re-coded and is the new setting.  The old setting "security.show.folders.where.user.can.see.subobjects" is not used anymore
# {valueType: "boolean", required: true}
security.folders.are.viewable.by.all = false

# put in a group name to exclude non admins who have a lot of privileges who have bad performance
# {valueType: "group"}
security.show.all.folders.if.in.group = $$grouper.rootStemForBuiltinObjects$$:sysadminStemViewers

# recalc in change log if the user has needed privileges in the last X seconds, default to 604800 which is one week
# so if someone has needed stem view privileges in the last week, then have the change log keep it up to date
# 0 means dont do this for anyone (full recalc each time), -1 means do this for everyone who has ever checked stem view,
# other negative values are not valid.
# {valueType: "integer"}
security.folders.view.privileges.recalcChangeLog.ifNeededInLastSeconds = 604800

# log error if performance is above this number of seconds.  tells you to exclude some users or disable feature
# leave blank or -1 to disable
# {valueType: "integer", required: true}
security.show.all.folders.log.above.seconds = 30

# log security folder view privilege change log consumer
# {valueType: "boolean", required: true}
security.folder.view.privileges.changeLogConsumer.log = false

# log security folder view privilege full daemon
# {valueType: "boolean", required: true}
security.folder.view.privileges.fullDaemon.log = false

# group which pre-loads stem view privileges in the full daemon run.  Run the full to prime the privileges or wait for it to run
# {valueType: "String", required: true}
security.folder.view.privileges.precompute.group = $$grouper.rootStemForBuiltinObjects$$:privilege:stemViewPrecompute

###################################
## Member sort and search
###################################

# Attributes of members are kept in the grouper_members table to allow easy sorting and searching (for instance when listing group members).
# When performing a sort or search and an index is not specified, then a default index will be used as configured below.  The value is comma-separated,
# so that if the user does not have access to the first index, then next will be tried and so forth.
# Note:  all sources should have attributes configured for all default indexes.
# {valueType: "integer", required: true}
member.search.defaultIndexOrder=0

# {valueType: "integer", required: true}
member.sort.defaultIndexOrder=0


###################################
## Database confirmation of changes
## whitelist (allow) and blacklist (deny) for db/ldap data or object deletes, without prompting the user to confirm
## if a listing is in the whitelist (allow), it will be allowed to delete db/ldap
## if a listing is in the blacklist (deny), it will be denied from deleting db/ldap
## multiple inputs can be entered with .0, .1, .2, etc.  These numbers must be sequential, starting with 0
## for ldap, the user will be something like this: uid=admin,ou=system
## for ldap, the url will be something like this: ldap://localhost:10389
###################################

# allow this database user to make changes to the DDL without confirmation (e.g. non-prod, testing)
# {valueType: "string", required: true, regex: "^db\\.change\\.allow\\.user\\.([0-9]+)$"}
db.change.allow.user.0=grouper_v5abc

# allow this database user to make changes to the DDL without confirmation (e.g. non-prod, testing)
# {valueType: "string", required: true, regex: "^db\\.change\\.allow\\.url\\.([0-9]+)$"}
db.change.allow.url.0=jdbc:postgresql://localhost:5432/postgres?currentSchema=grouper_v5abc

# allow this database user to make changes to the DDL without confirmation (e.g. non-prod, testing)
# {valueType: "string", required: true, regex: "^db\\.change\\.allow\\.user\\.([0-9]+)$"}
db.change.allow.user.1=grouper1

# allow this database user to make changes to the DDL without confirmation (e.g. non-prod, testing)
# {valueType: "string", required: true}
db.change.allow.url.1=jdbc:mysql://localhost:3306/grouper1?useSSL=false

# allow this database user to make changes to the DDL without confirmation (e.g. non-prod, testing)
# {valueType: "string", required: true}
db.change.deny.user.0=grouper2

# allow this database user to make changes to the DDL without confirmation (e.g. non-prod, testing)
# {valueType: "string", required: true}
db.change.deny.url.0=jdbc:mysql://localhost:3306/grouper2?useSSL=false

# if should give error when detect driver mismatch (set to false if using an
# unknown driver, and tell the grouper team so we can add to list)
# {valueType: "boolean", required: true}
db.log.driver.mismatch = true

###################################
## Grouper include / exclude and requireGroups
## If enabled, will make sure the Type is installed, and when that type is
## applied to a group, it will auto-create the other groups needed to manage the include and exclude lists
## see: https://bugs.internet2.edu/jira/browse/GRP-178
## the naming settings below are only used when the type is applied to a group, will not affect
## existing include/exclude groups
###################################

#if the addIncludeExclude and requireInGroups should be enabled, and if the type(s) should be
#auto-created, and used to auto create groups to facilitate include and exclude lists, and require lists
# {valueType: "boolean", required: true}
grouperIncludeExclude.use = false

# {valueType: "boolean", required: true}
grouperIncludeExclude.requireGroups.use = false

# for requireGroups (groups that the members must be to be in the overall group).  name is the name of the attribute or type.
# note attributes are a global namespace, so you might want to use a naming convention,
# e.g. prefix with "require".   increment the integer to add multiple
# {valueType: "string", required: true, regex: "^grouperIncludeExclude\\.requireGroup\\.name\\.([0-9]+)$"}
#grouperIncludeExclude.requireGroup.name.0 = requireActiveEmployee

# requireGroups: attributeOrType is either attribute for an attribute underneath the requireInGroups type, or type to be a top level type.
# increment the integer to add multiple
# {valueType: "string", required: true, regex: "^grouperIncludeExclude\\.requireGroup\\.attributeOrType\\.([0-9]+)$"}
#grouperIncludeExclude.requireGroup.attributeOrType.0 = type

# requireGroups: group that is required ("and"ed).   increment the integer to add multiple
# {valueType: "group", required: true, regex: "^grouperIncludeExclude\\.requireGroup\\.group\\.([0-9]+)$"}
#grouperIncludeExclude.requireGroup.group.0 = school:community:activeEmployee

# requireGroups: description is the tooltip.   increment the integer to add multiple
# {valueType: "string", regex: "^grouperIncludeExclude\\.requireGroup\\.description\\.([0-9]+)$"}
#grouperIncludeExclude.requireGroup.description.0 = If value is true, members of the overall group must be an active employee (in the school:community:activeEmployee group).  Otherwise, leave this value not filled in.


# set name for include/exclude
# {valueType: "string"}
grouperIncludeExclude.type.name = addIncludeExclude

# set tooltip for include/exclude
# {valueType: "string"}
grouperIncludeExclude.tooltip = Select this type to auto-create other groups which facilitate having include and exclude list

# set name for requireGroups
# {valueType: "string"}
grouperIncludeExclude.requireGroups.type.name = requireInGroups

# set tooltip for requireGroups
# {valueType: "string"}
grouperIncludeExclude.requireGroups.tooltip = Select this type to auto-create other groups which set up group math so that other groups can be required for membership (e.g. activeEmployee)

# require also in groups (ad hoc)
# leave grouperIncludeExclude.andGroups.attributeName blank if you dont want to use this attribute...
# though if you were using it, it wont remove already configured groups
# {valueType: "string"}
grouperIncludeExclude.requireGroups.attributeName = requireAlsoInGroups

# toolip for require also in groups
# {valueType: "string"}
grouperIncludeExclude.requireGroups.attribute.tooltip = Enter in comma separated group path(s).  An entity must be in these groups for it to be in the overall group.  e.g. stem1:stem2:group1, stem1:stem3:group2

#suffixes for various include/exclude groups (can use ${space} for space).
#note, these should uniquely identify various parts of the include/exclude.
#i.e. if the grouperIncludeExclude type is applied to a group with a suffix of the include suffix,
#the other groups will not be created...
# {valueType: "string"}
grouperIncludeExclude.systemOfRecord.extension.suffix = _systemOfRecord

# suffix for include group of include/exclude
# {valueType: "string"}
grouperIncludeExclude.include.extension.suffix = _includes

# suffix for exclude group of include/exclude
# {valueType: "string"}
grouperIncludeExclude.exclude.extension.suffix = _excludes

# suffix for system-of_record and includes (virtual union) group of include/exclude
# {valueType: "string"}
grouperIncludeExclude.systemOfRecordAndIncludes.extension.suffix = _systemOfRecordAndIncludes

# suffix for includes minus excludes group of include/exclude
# {valueType: "string"}
grouperIncludeExclude.includesMinusExcludes.extension.suffix = _includesMinusExcludes

# suffix of the require groups helper group
# note, put a ${i} in there for where the 1 based index will go
# {valueType: "string"}
grouperIncludeExclude.requireGroups.extension.suffix = _requireGroups${i}

# display extension suffix for system of record group
# suffixes for various include/exclude groups (can use ${space} for space)
# {valueType: "string"}
grouperIncludeExclude.systemOfRecord.displayExtension.suffix = ${space}system of record

# display extension suffix for include group
# {valueType: "string"}
grouperIncludeExclude.include.displayExtension.suffix = ${space}includes

# display extension suffix for exclude group
# {valueType: "string"}
grouperIncludeExclude.exclude.displayExtension.suffix = ${space}excludes

# display extension suffix for system of record and include group
# {valueType: "string"}
grouperIncludeExclude.systemOfRecordAndIncludes.displayExtension.suffix = ${space}system of record and includes

# display extension suffix for include minus exclude group.  this is used if you have include/exclude and requireGroups
# {valueType: "string"}
grouperIncludeExclude.includesMinusExcludes.displayExtension.suffix = ${space}includes minus excludes

# require gruops display extension suffix.
# note, put a ${i} in there for where the 1 based index will go
# {valueType: "string"}
grouperIncludeExclude.requireGroups.displayExtension.suffix = ${space}requireGroups ${i}

# include/exclude overall description
#can use ${extension} as the group extension, or ${displayExtension} for group display extension
# {valueType: "string"}
grouperIncludeExclude.overall.description = Group containing list of ${displayExtension} after adding the includes and subtracting the excludes

# include/exclude systemOfRecord description
# {valueType: "string"}
grouperIncludeExclude.systemOfRecord.description = Group containing list of ${displayExtension} (generally straight from the system of record) without yet considering manual include or exclude lists

# include/exclude include description
# {valueType: "string"}
grouperIncludeExclude.include.description = Group containing manual list of includes for group ${displayExtension} which will be added to the system of record list (unless the subject is also in the excludes group)

# include/exclude exclude description
# {valueType: "string"}
grouperIncludeExclude.exclude.description = Group containing manual list of excludes for group ${displayExtension} which will not be in the overall group

# include/exclude systemOfRecord-and-includes description
# {valueType: "string"}
grouperIncludeExclude.systemOfRecordAndIncludes.description = Internal utility group for group ${displayExtension} which facilitates the group math for the include and exclude lists

# include/exclude includes minus excludes description
# {valueType: "string"}
grouperIncludeExclude.includesMinusExclude.description = Internal utility group for group ${displayExtension} which facilitates includes, excludes, and required groups (e.g. activeEmployee)

# requireGroups description
# note, put a ${i} in there for where the 1 based index will go
# {valueType: "string"}
grouperIncludeExclude.requireGroups.description = Internal utility group for group ${displayExtension} which facilitates required groups (e.g. activeEmployee)

# if should use transaction in include/exclude
# {valueType: "boolean", required: true}
grouperIncludeExcludeUseTransaction = true


###################################
## Composites
###################################

# When immediate membership changes are made, if the group being modified matches this regex, 
# then composite membership changes will be made synchronously instead of by the daemon
# {valueType: "string"}
composites.synchronousCalculationGroupNameRegex =

###################################
## Subject settings
###################################

# if finding across multiple threadable sources, use threads to do the work faster
# {valueType: "boolean", required: true}
subjects.allPage.useThreadForkJoin = false

# if finding across multiple threadable sources, use threads to do the work faster
# {valueType: "boolean", required: true}
subjects.idOrIdentifier.useThreadForkJoin = false

# if the creator and last updater should be group subject attributes (you get
# a performance gain if you set to false, but if true you can see subject id from UI in 2.0
# {valueType: "boolean", required: true}
subjects.group.useCreatorAndModifierAsSubjectAttributes = true

# customize subjects by implementing this interface: edu.internet2.middleware.grouper.subj.SubjectCustomizer
# or extending this class: edu.internet2.middleware.grouper.subj.SubjectCustomizerBase (recommended)
# note the instance will be reused to make sure it is threadsafe
# {valueType: "class", mustExtendClass: "edu.internet2.middleware.grouper.subj.SubjectCustomizerBase"}
subjects.customizer.className =

# if we should use a root session if one isnt started for subject lookups (behavior in v2.0-
# {valueType: "boolean", required: true}
subjects.startRootSessionIfOneIsntStarted = false

###################################
## Hooks
## You can register multiple classes for one hook base class by comma separating the hooks implementations
## You can also register hooks at runtime with:
## GrouperHookType.addHookManual("hooks.group.class", YourSchoolGroupHooks2.class);
###################################

#implement a group attribute hook by extending edu.internet2.middleware.grouper.hooks.AttributeHooks
# {valueType: "class", mustExtendClass: "edu.internet2.middleware.grouper.hooks.AttributeHooks"}
#hooks.attribute.class=edu.yourSchool.it.YourSchoolGroupHooks,edu.yourSchool.it.YourSchoolGroupHooks2

#implement an attribute def hook by extending edu.internet2.middleware.grouper.hooks.AttributeDefHooks
# {valueType: "class", mustExtendClass: "edu.internet2.middleware.grouper.hooks.AttributeDefHooks"}
#hooks.attributeDef.class=edu.yourSchool.it.YourSchoolAttributeDefHooks,edu.yourSchool.it.YourSchoolAttributeDefHooks2

#implement an attribute def name hook by extending edu.internet2.middleware.grouper.hooks.AttributeDefNameHooks
# {valueType: "class", mustExtendClass: "edu.internet2.middleware.grouper.hooks.AttributeDefNameHooks"}
#hooks.attributeDefName.class=edu.yourSchool.it.YourSchoolAttributeDefNameHooks,edu.yourSchool.it.YourSchoolAttributeDefNameHooks2

#implement an attribute assign hook by extending edu.internet2.middleware.grouper.hooks.AttributeAssignHooks
# {valueType: "class", mustExtendClass: "edu.internet2.middleware.grouper.hooks.AttributeAssignHooks"}
#hooks.attributeAssign.class=edu.yourSchool.it.YourSchoolAttributeAssignHooks,edu.yourSchool.it.YourSchoolAttributeAssignHooks2

#implement an attribute assign hook by extending edu.internet2.middleware.grouper.hooks.AttributeAssignValueHooks
# {valueType: "class", mustExtendClass: "edu.internet2.middleware.grouper.hooks.AttributeAssignValueHooks"}
#hooks.attributeAssignValue.class=edu.yourSchool.it.YourSchoolAttributeAssignValueHooks,edu.yourSchool.it.YourSchoolAttributeAssignValueHooks2

#implement a group hook by extending edu.internet2.middleware.grouper.hooks.GroupHooks
# {valueType: "class", mustExtendClass: "edu.internet2.middleware.grouper.hooks.GroupHooks"}
#hooks.group.class=edu.yourSchool.it.YourSchoolGroupHooks,edu.yourSchool.it.YourSchoolGroupHooks2

#implement a grouper lifecycle hook by extending edu.internet2.middleware.grouper.hooks.LifecycleHooks
# {valueType: "class", mustExtendClass: "edu.internet2.middleware.grouper.hooks.LifecycleHooks"}
#hooks.lifecycle.class=edu.yourSchool.it.YourSchoolLifecycleHooks

#implement a membership hook by extending edu.internet2.middleware.grouper.hooks.MembershipHooks
# {valueType: "class", mustExtendClass: "edu.internet2.middleware.grouper.hooks.MembershipHooks"}
#hooks.membership.class=edu.yourSchool.it.YourSchoolMembershipHooks

#implement a member hook by extending edu.internet2.middleware.grouper.hooks.MemberHooks
# {valueType: "class", mustExtendClass: "edu.internet2.middleware.grouper.hooks.MemberHooks"}
#hooks.member.class=edu.yourSchool.it.YourSchoolMemberHooks

#implement a stem hook by extending edu.internet2.middleware.grouper.hooks.StemHooks
# {valueType: "class", mustExtendClass: "edu.internet2.middleware.grouper.hooks.StemHooks"}
#hooks.stem.class=edu.yourSchool.it.YourSchoolStemHooks

#implement a composite hook by extending edu.internet2.middleware.grouper.hooks.CompositeHooks
# {valueType: "class", mustExtendClass: "edu.internet2.middleware.grouper.hooks.CompositeHooks"}
#hooks.composite.class=edu.yourSchool.it.YourSchoolCompositeHooks

#implement a field hook by extending edu.internet2.middleware.grouper.hooks.FieldHooks
# {valueType: "class", mustExtendClass: "edu.internet2.middleware.grouper.hooks.FieldHooks"}
#hooks.field.class=edu.yourSchool.it.YourSchoolFieldHooks

#implement a grouperSession hook by extending edu.internet2.middleware.grouper.hooks.GrouperSessionHooks
# {valueType: "class", mustExtendClass: "edu.internet2.middleware.grouper.hooks.GrouperSessionHooks"}
#hooks.grouperSession.class=edu.yourSchool.it.YourSchoolGrouperSessionHooks

#implement a groupType hook by extending edu.internet2.middleware.grouper.hooks.GroupTypeHooks
# {valueType: "class", mustExtendClass: "edu.internet2.middleware.grouper.hooks.GroupTypeHooks"}
#hooks.groupType.class=edu.yourSchool.it.YourSchoolGroupTypeHooks

#implement a groupTypeTuple hook by extending edu.internet2.middleware.grouper.hooks.GroupTypeTupleHooks
# {valueType: "class", mustExtendClass: "edu.internet2.middleware.grouper.hooks.GroupTypeTupleHooks"}
#hooks.groupTypeTuple.class=edu.yourSchool.it.YourSchoolGroupTypeTupleHooks

#implement a loader hook by extending edu.internet2.middleware.grouper.hooks.LoaderHooks
# {valueType: "class", mustExtendClass: "edu.internet2.middleware.grouper.hooks.LoaderHooks"}
#hooks.loader.class=edu.yourSchool.it.YourSchoolLoaderHooks

#implement an external subject hook by extending edu.internet2.middleware.grouper.hooks.ExternalSubjectHooks
# {valueType: "class", mustExtendClass: "edu.internet2.middleware.grouper.hooks.ExternalSubjectHooks"}
#hooks.externalSubject.class=edu.yourSchool.it.YourSchoolExternalSubjectHooks

# if the edu.internet2.middleware.grouper.hooks.examples.GroupUniqueExtensionHook is case insensitive
# {valueType: "boolean", required: true}
hook.group.unique.extension.caseInsensitive = false

# if the auto assign attribute assign hook should be auto registered
# {valueType: "boolean", required: true}
grouperHook.attributeAssign.autoAssign.autoRegister = true

# if the auto register hook checks groups to see if new memberships are valid
# {valueType: "boolean", required: true}
grouperHook.MembershipRequireMembershipHook.autoRegister = true

# if the auto register hook checks stems with same name case insensitive
# {valueType: "boolean", required: true}
grouperHook.StemUniqueNameCaseInsensitiveHook.autoRegister = true

# if the auto register hook checks groups with same name case insensitive
# {valueType: "boolean", required: true}
grouperHook.GroupUniqueNameCaseInsensitiveHook.autoRegister = true

# if the auto register hook checks attribute defs with same name case insensitive
# {valueType: "boolean", required: true}
grouperHook.AttributeDefUniqueNameCaseInsensitiveHook.autoRegister = true

# if the auto register hook checks attribute def names with same name case insensitive
# {valueType: "boolean", required: true}
grouperHook.AttributeDefNameUniqueNameCaseInsensitiveHook.autoRegister = true

# if the hook to veto deprovisioned users should be registered
# {valueType: "boolean", required: true}
grouperHook.MembershipVetoIfDeprovisionedHook.autoRegister = true

###################################
## Rules
###################################

# Rules users who are in the following group can use the actAs field to act as someone else
# You can put multiple groups separated by commas.  e.g. a:b:c, e:f:g
# You can put a single entry as the group the calling user has to be in, and the grouper the actAs has to be in
# separated by 4 colons
# e.g. if the configured values is:       a:b:c, e:f:d :::: r:e:w, x:e:w
# then if the calling user is in a:b:c or x:e:w, then the actAs can be anyone
# if not, then if the calling user is in e:f:d, then the actAs must be in r:e:w.  If multiple rules, then
# if one passes, then it is a success, if they all fail, then fail.
# {valueType: "string"}
rules.act.as.group =

# any actAs subject in this group has access to more objects when the EL fires on
# the IF or THEN EL clause
# {valueType: "group"}
rules.accessToApiInEl.group =

# cache the decision to allow a user to actAs another, so it doesnt have to be calculated each time
# defaults to 30 minutes
# {valueType: "integer", required: true}
rules.act.as.cache.minutes = 30

# uuids (comma separated) of the attribute assign record which is the rule type to the owner object
# e.g. SELECT gaagv.attribute_assign_id FROM grouper_attr_asn_group_v gaagv WHERE gaagv.attribute_def_name_name LIKE '%:rule' AND gaagv.group_name = 'stem:a'
# make sure log info level is set for RuleEngine
# log4j.logger.edu.internet2.middleware.grouper.rules.RuleEngine = INFO
# {valueType: "string"}
rules.attributeAssignTypeIdsToLog = abc1234abc123, def456def345

# if this is true, then log a lot of info about why rules do or do not fire... only turn on temporarily
# since it takes a lot of resources...  note you need log DEBUG set for the rules engine in log4j.properties too e.g.
# log4j.logger.edu.internet2.middleware.grouper.rules = DEBUG
# {valueType: "boolean", required: true}
rules.logWhyRulesDontFire = false

# put in fully qualified classes to add to the EL context.  Note that they need a default constructor
# comma separated.  The alias will be the simple class name without a first cap.
# e.g. if the class is test.Test the alias is "test"
# {valueType: "class", multiple: true}
rules.customElClasses =

# If the CHECK, IF, and THEN are all exactly what is needed for managing inherited stem privileges
# Then allow an actAs GrouperSystem in source g:isa
# {valueType: "boolean", required: true}
rules.allowActAsGrouperSystemForInheritedStemPrivileges =

# If not blank, then keep email templates in this folder instead of classpath
# If in classpath, it is classpath: grouperRulesEmailTemplates/someTemplate.txt
# {valueType: "string"}
rules.emailTemplatesFolder =

# If not blank, then only allow members of this group to create rules in the UI
# {valueType: "string"}
rules.restrictRulesUiToMembersOfThisGroupName = 

# If not blank, then only allow members of this group to send emails from rules
# {valueType: "string"}
rules.restrictRulesEmailSendersToMembersOfThisGroupName = 

# If not blank, then rules associated with these groups require at least VIEW access on the groups and folders associated with the rules 
# {valueType: "string"}
rules.groupNamesRestrictRules =

# If not blank, then rules associated with these folders require at least VIEW access on the groups and folders associated with the rules 
# {valueType: "string"}
rules.stemNamesRestrictRules =

# if in daemon check to see if restricted folders have memberships or privileges from subjects in restricted group
# and remove them
# {valueType: "boolean", required: true}
grouperRuleDaemon_GRP_2143_Remove_memberships_from_restricted_stem_when_removed_from_dependent_group = true

# if in change log check to see if removed users from restricted group has memberships or privileges in folders
# and remove them
# {valueType: "boolean", required: true}
grouperRuleChangeLog_GRP_2143_Remove_memberships_from_restricted_stem_when_removed_from_dependent_group = true

###################################
## Group attribute validation via regex
## You can attach a regex to an attribute name (including built ins)
## If none are registered, the built in hook will not be enabled
## The built ins are description, displayName, extension, displayExtension, name
## Configure a group.attribute.validator.attributeName.X for attribute name
## group.attribute.validator.regex.X for the regex
## group.attribute.validator.vetoMessage.X for the veto message (can contain the variable $attributeValue$ which will substitute)
## the X must be a sequential integer which groups the config entries together.
## do not repeat two config entries
###################################

# if there is not another group extension validation, then validate by alphanumerics, underscore, and dash
# {valueType: "boolean", required: true}
group.validateExtensionByDefault = true

# if there is not another stem extension validation, then validate by alphanumerics, underscore, and dash
# {valueType: "boolean", required: true}
stem.validateExtensionByDefault = true

# if there is not another attributeDef extension validation, then validate by alphanumerics, underscore, and dash
# {valueType: "boolean", required: true}
attributeDef.validateExtensionByDefault = true

# if there is not another attributeDefName extension validation, then validate by alphanumerics, underscore, and dash
# {valueType: "boolean", required: true}
attributeDefName.validateExtensionByDefault = true

# Attach a regex validator by attribute name.  This is the attribute name
# {valueType: "string", required: true, regex: "^group\\.attribute\\.validator\\.attributeName\\.([0-9]+)$"}
# group.attribute.validator.attributeName.0=extension

# Attach a regex validator by attribute name. This is the regex
# {valueType: "string", required: true, regex: "^group\\.attribute\\.validator\\.regex\\.([0-9]+)$"}
# group.attribute.validator.regex.0=^[a-zA-Z0-9]+$

# Attach a regex validator by attribute name.  This is the veto message if a group create has an invalid attribute
# {valueType: "string", required: true, regex: "^group\\.attribute\\.validator\\.vetoMessage\\.([0-9]+)$"}
# group.attribute.validator.vetoMessage.0=Group ID '$attributeValue$' is invalid since it must contain only alpha-numerics


###################################
## Stem attribute validation via regex
## You can attach a regex to an attribute name (including built ins)
## If none are registered, the built in hook will not be enabled
## The built ins are description, displayName, extension, displayExtension, name
## Configure a stem.attribute.validator.attributeName.X for attribute name
## stem.attribute.validator.regex.X for the regex
## stem.attribute.validator.vetoMessage.X for the veto message (can contain the variable $attributeValue$ which will substitute)
## the X must be a sequential integer which groups the config entries together.
## do not repeat two config entries
###################################

# Attach a regex validator by attribute name.  This is the attribute name
# {valueType: "string", required: true, regex: "^stem\\.attribute\\.validator\\.attributeName\\.([0-9]+)$"}
# stem.attribute.validator.attributeName.0=extension

# Attach a regex validator by attribute name. This is the regex
# {valueType: "string", required: true, regex: "^stem\\.attribute\\.validator\\.regex\\.([0-9]+)$"}
# stem.attribute.validator.regex.0=^[a-zA-Z0-9]+$

# Attach a regex validator by attribute name.  This is the veto message if a stem create has an invalid attribute
# {valueType: "string", required: true, regex: "^stem\\.attribute\\.validator\\.vetoMessage\\.([0-9]+)$"}
# stem.attribute.validator.vetoMessage.0=Stem ID '$attributeValue$' is invalid since it must contain only alpha-numerics

###################################
## Attribute def field validation via regex
## You can attach a regex to a field name (including built ins)
## If none are registered, the built in hook will not be enabled
## The built ins are description, extension, name
## Configure a attributeDef.attribute.validator.attributeName.X for attribute name
## attributeDef.attribute.validator.regex.X for the regex
## attributeDef.attribute.validator.vetoMessage.X for the veto message (can contain the variable $attributeValue$ which will substitute)
## the X must be a sequential integer which groups the config entries together.
## do not repeat two config entries
###################################

# Attach a regex validator by field name.  This is the field name
# {valueType: "string", required: true, regex: "^attributeDef\\.attribute\\.validator\\.attributeName\\.([0-9]+)$"}
# attributeDef.attribute.validator.attributeName.0=extension

# Attach a regex validator by field name. This is the regex
# {valueType: "string", required: true, regex: "^attributeDef\\.attribute\\.validator\\.regex\\.([0-9]+)$"}
# attributeDef.attribute.validator.regex.0=^[a-zA-Z0-9]+$

# Attach a regex validator by field name.  This is the veto message if an attributeDef create has an invalid field
# {valueType: "string", required: true, regex: "^attributeDef\\.attribute\\.validator\\.vetoMessage\\.([0-9]+)$"}
# attributeDef.attribute.validator.vetoMessage.0=AttributeDef ID '$attributeValue$' is invalid since it must contain only alpha-numerics

###################################
## Attribute def name field validation via regex
## You can attach a regex to a field name (including built ins)
## If none are registered, the built in hook will not be enabled
## The built ins are description, displayName, extension, displayExtension, name
## Configure a attributeDefName.attribute.validator.attributeName.X for attribute name
## attributeDefName.attribute.validator.regex.X for the regex
## attributeDefName.attribute.validator.vetoMessage.X for the veto message (can contain the variable $attributeValue$ which will substitute)
## the X must be a sequential integer which groups the config entries together.
## do not repeat two config entries
###################################

# Attach a regex validator by field name.  This is the field name
# {valueType: "string", required: true, regex: "^attributeDefName\\.attribute\\.validator\\.attributeName\\.([0-9]+)$"}
#attributeDefName.attribute.validator.attributeName.0=extension

# Attach a regex validator by attribute name. This is the regex
# {valueType: "string", required: true, regex: "^attributeDefName\\.attribute\\.validator\\.regex\\.([0-9]+)$"}
#attributeDefName.attribute.validator.regex.0=^[a-zA-Z0-9]+$

# Attach a regex validator by attribute name.  This is the veto message if an attributeDefName create has an invalid attribute
# {valueType: "string", required: true, regex: "^attributeDefName\\.attribute\\.validator\\.vetoMessage\\.([0-9]+)$"}
#attributeDefName.attribute.validator.vetoMessage.0=AttributeDefName ID '$attributeValue$' is invalid since it must contain only alpha-numerics



#####################################
## Audit settings
#####################################

# if set to true, then exceptions will be thrown if any actions are not audited... exceptions
# should not be thrown since everything should be audited, so this is a switch to make it absorb
# errors if there is a problem (will be logged instead if second param is true)
# {valueType: "boolean", required: true}
audit.requireAuditsForAllActions = false

# if should log audits for missing actions
# {valueType: "boolean", required: true}
audit.logAuditsForMissingActions = false

# max length of text fields in audit if the DB has a constraint.  Might need to set to 2675 for some versions / configs of postgres
# {valueType: "integer", required: true}
audit.maxLengthTruncateTextFieldsIndexed = 4000

#####################################
## Change log settings
#####################################

# if we should insert records into grouper_change_log_temp when events happen
# defaults to true.  Note, it is not currently supported to set this to false...
# {valueType: "boolean", required: true}
changeLog.enabled = true


#####################################
## Settings to track last membership changes for groups and stems.
#####################################

# If true, when an immediate membership changes for a group (either a privilege or a list member),
# then an update will be made to the lastImmediateMembershipChange property for the group.
# {valueType: "boolean", required: true}
groups.updateLastImmediateMembershipTime = false

# If true, when an immediate, composite, or effective membership changes for a group (either a privilege or a list member),
# then an update will be made to the lastMembershipChange property for the group.
# {valueType: "boolean", required: true}
groups.updateLastMembershipTime = false

# If true, when an immediate or effective membership changes for a stem (this would be a naming privilege),
# then an update will be made to the lastMembershipChange property for the stem.
# {valueType: "boolean", required: true}
stems.updateLastMembershipTime = false


#####################################
## Database structure data definition language (DDL) settings
#####################################

# ddlutils db name will be set by default, you can override it here, it must be one of:
# mysql, mysql5, oracle, oracle10, oracle9, postgresql
# {valueType: "string"}
#ddlutils.dbname.override = oracle10

# if you want to not create the subject tables (grouper examples for unit testing),
# then set this to true
# {valueType: "boolean", required: true}
ddlutils.exclude.subject.tables = false

# set the path where ddl scripts are generated (they will be uniquely named in this directory).
# if blank, the directory used will be the current directory
# {valueType: "string"}
ddlutils.directory.for.scripts = ddlScripts

# during schema export, should it install grouper data also or not.  e.g. insert the root stem, default true
# {valueType: "boolean", required: true}
ddlutils.schemaexport.installGrouperData = true

# when grouper starts, should it shut down if not right version?
# {valueType: "boolean", required: true}
ddlutils.failIfNotRightVersion = true

# after you have converted id's, and are happy with the conversion of removing the uuid col,
# this will remove the backup uuid cols when running the gsh command: gsh -registry -deep
# {valueType: "boolean", required: true}
ddlutils.dropBackupUuidCols = false

# after you have converted field id foreign keys, and are happy with the conversion of removing the attribute name,
# membership list name, and type cols,
# this will remove the backup field name/type cols when running the gsh command: gsh -registry -deep
# {valueType: "boolean", required: true}
ddlutils.dropBackupFieldNameTypeCols = false

# before the group name etc was moved to the grouper_groups table, the attributes table
# was backed up.  If it should not be backed up, or if the upgrade is done and works, then it can
# be removed, set to true, run: gsh -registry -deep
# {valueType: "boolean", required: true}
ddlutils.dropAttributeBackupTableFromGroupUpgrade = false

# Since grouper_memberships no longer has effective memberships, that table doesn't need via_id,
# depth and parent_membership.  If they were converted, this will drop the backup of those cols with: gsh -registry -deep
# {valueType: "boolean", required: true}
ddlutils.dropMembershipBackupColsFromOwnerViaUpgrade = false

# After legacy attributes are converted, the backed up tables can be dropped with: gsh -registry -deep
# {valueType: "boolean", required: true}
ddlutils.dropLegacyAttributes = false

# this is the schema ddlutils uses to query metadata with jdbc.  usually this can be omitted,
# and it defaults to your database loginid, however, in postgres, it can be different, so enter here
# in sql server, it might need to be: dbo
# {valueType: "string"}
#ddlutils.schema = public

#if you are running a DB that supports them, but you dont want them, disable comments here (defaults to false)
# {valueType: "boolean", required: true}
ddlutils.disableComments = false

#set to true and we wont subsitute varchar 4000 for text in mysql (wont work in innodb utf-8 databases
# {valueType: "boolean", required: true}
ddlutils.dontSubstituteVarchar4000forTextMysql = false

# this is obscure, but if you are having trouble with direct sql for attribute updates, set this to false
# {valueType: "boolean", required: true}
grouperAllowSqlOnAttributeValueUpdate = true

# if you want to change the max size for names of groups.  Note, cant be larger than the
# database column and unicode might take extra chars.  i.e. if you want to make it smaller that is fine.
# this is for object name and display name
# the default is 1024 or 900 for SQL server
# {valueType: "integer"}
grouper.groupName.maxSize =

# if you want to change the max size for names of attributeDefs.  Note, cant be larger than the
# database column and unicode might take extra chars.  i.e. if you want to make it smaller that is fine.
# this is for object name and display name
# the default is 1024 or 900 for SQL server
# {valueType: "integer"}
grouper.nameOfAttributeDef.maxSize =

# if you want to change the max size for names of attributeDefNames.  Note, cant be larger than the
# database column and unicode might take extra chars.  i.e. if you want to make it smaller that is fine.
# this is for object name and display name
# the default is 1024 or 900 for SQL server
# {valueType: "integer"}
grouper.nameOfAttributeDefName.maxSize =

# if you want to change the max size for names of folders.  Note, cant be larger than the
# database column and unicode might take extra chars.  i.e. if you want to make it smaller that is fine.
# this is for object name and display name
# the default is 1024 or 900 for SQL server
# default for stem name in 2.3 and before is 255: GRP-1807: grouper folder names limited to 255 but should be longer
# {valueType: "integer"}
grouper.stemName.maxSize =

#####################################
## Mail settings
#####################################

#smtp server is a domain name or dns name.  set to "testing" if you want to log instead of send. eg: whatever.school.edu
# {valueType: "string"}
mail.smtp.server =

#leave blank if unauthenticated
# {valueType: "string"}
#mail.smtp.user =

#leave blank if unauthenticated
# {valueType: "password", sensitive: true}
#mail.smtp.pass =

# comma separated group name and uuid's to be allow email addresses to dereference.
# for instance: a:b:c@grouper, def345@grouper

# If a configuration enters in one of those email addresses, and it is in this allow list, then
# dereference the group and member and send email to their individual email addresses.  Note that
# groups in this list can have their members discovered so treat their membership as non private.
# using the uuid@grouper gives a little bit of obscurity since the uuid of the group needs to be known
# is it is still security by obscurity which is not true security.  There is a max of 100 members it will
# send to
# {valueType: "string", multiple: true}
mail.smtp.groupUuidAndNameEmailDereferenceAllow =

#leave blank or false for no ssl, true for ssl
# {valueType: "boolean"}
mail.smtp.ssl = false

# leave blank or false for no tls, true for tls
# {valueType: "boolean"}
mail.smtp.starttls.enable = false

# if you are doing SSL/TLS, you should put the smtp server here so it is trusted
# {valueType: "string"}
mail.smtp.ssl.trust =

#leave blank for default (probably 25), if ssl is true, default is 465, else specify
# {valueType: "integer"}
#mail.smtp.port =

# mail transport protocol you generally dont need to change
# {valueType: "string", defaultValue: "smtp"}
mail.smtp.transport.protocol =

# in the java mail settings if "smtp" or whatever the protocol is should be in the property names
# {valueType: "boolean", defaultValue: "true"}
mail.smtp.use.protocol.in.property.names =

# if you have trouble connecting to SSL/TLS, try a different SSL protocol, e.g. TLSv1.2
# {valueType: "string"}
# mail.smtp.ssl.protocols =

# generally saying SSL true is enough, though you might need to set a class.  generally leasve this blank
# {valueType: "string"}
# mail.smtp.socketFactory.class =

# generally you will leave this blank unless doing something advanced
# {valueType: "boolean"}
# mail.smtp.socketFactory.fallback =

#this is the default email address where mail from grouper will come from. eg: [email protected]
# {valueType: "string", required: true}
mail.smtp.from.address =

#this is the subject prefix of emails, which will help differentiate prod vs test vs dev etc. eg: TEST:
#note, you can use $space$ to put a space at the end of the config, otherwise it will be trimmed.
# {valueType: "string"}
mail.smtp.subject.prefix =

# in non-prod send all messages to this address to see what messages would have been sent out (or comma separate multiple addresses).
# if you set addresses here, no real email will be sent out. eg: [email protected]
# {valueType: "string"}
mail.smtp.sendAllMessagesHere =

# if debug info from java mail should be printed
# {valueType: "boolean", defaultValue: "false"}
mail.smtp.debug =

# if this smtp connector is enabled
# {valueType: "boolean", defaultValue: "true"}
# mail.smtp.enabled =

# content type, default is: text/plain; charset=utf-8
# {valueType: "string"}
mail.smtp.grouperEmailContentType =

# external system test "to" address type: emailAddress, emailToSubject, emailToGroup
# {valueType: "string", required: true, formElement: "dropdown", optionValues: ["emailAddress", "emailToSubject", "emailToGroup"]}
mail.smtp.externalSystemTestToType =

# external system test "to" address
# {valueType: "string", required: true, showEl: "${externalSystemTestToType == 'emailAddress'}"}
mail.smtp.externalSystemTestToAddress =

# external system test "to" source id, required if not providing an "External system to address"
# {valueType: "string", required: true, showEl: "${externalSystemTestToType == 'emailToSubject'}", formElement: "dropdown", optionValuesFromClass: "edu.internet2.middleware.subject.provider.SourceManagerOptionValueDriver"}
mail.smtp.externalSystemTestToSubjectSourceId =

# external system test "to" subject id, required if not providing an "External system to address" though mutually exclusive
# {valueType: "string", required: true, showEl: "${externalSystemTestToType == 'emailToSubject'}", formElement: "dropdown", optionValues: ["subjectId", "subjectIdentifier"]}
mail.smtp.externalSystemTestToSubjectIdType =

# external system test "to" subject id, required if not providing an "External system to address" though mutually exclusive
# {valueType: "string", required: true, showEl: "${externalSystemTestToType == 'emailToSubject' && externalSystemTestToSubjectIdType == 'subjectId'}"}
mail.smtp.externalSystemTestToSubjectId =

# external system test "to" subject id, required if not providing an "External system to address" though mutually exclusive
# {valueType: "string", required: true, showEl: "${externalSystemTestToType == 'emailToSubject' && externalSystemTestToSubjectIdType == 'subjectIdentifier'}"}
mail.smtp.externalSystemTestToSubjectIdentifier =

# external system test "to" a group.  Send to group UUID or name?
# {valueType: "string", required: true, showEl: "${externalSystemTestToType == 'emailToGroup'}", formElement: "dropdown", optionValues: ["groupUuid", "groupName"]}
mail.smtp.externalSystemTestToGroupIdType =

# external system test "to" group UUID
# {valueType: "string", required: true, showEl: "${externalSystemTestToType == 'emailToGroup' && externalSystemTestToGroupIdType == 'groupUuid'}"}
mail.smtp.externalSystemTestToGroupId =

# external system test "to" group name
# {valueType: "string", required: true, showEl: "${externalSystemTestToType == 'emailToGroup' && externalSystemTestToGroupIdType == 'groupName'}"}
mail.smtp.externalSystemTestToGroupName =

# subject of email
# {valueType: "string", required: true}
mail.smtp.externalSystemTestSubject =

# body of email
# {valueType: "string", required: true, formElement: "textarea"}
mail.smtp.externalSystemTestBody =

# cc of email
# {valueType: "string"}
mail.smtp.externalSystemTestCcAddress =

# bcc of email
# {valueType: "string"}
mail.smtp.externalSystemTestBccAddress =

# from of email.  Will default to the global default from address
# {valueType: "string"}
mail.smtp.externalSystemTestFromAddress =

# comma separated reply-to addresses of email.  Will default to the global default from address
# {valueType: "string"}
mail.smtp.externalSystemTestReplyAddresses =

# when running junit tests, this is the address that will be used. eg: [email protected]
# {valueType: "string"}
# mail.test.address =

#####################################
## Performance timers
#####################################


# if log performance info on GroupSave
# set in log4j2.xml: log4j.logger.edu.internet2.middleware.grouper.util.PerformanceLogger = INFO
# {valueType: "boolean", required: true}
grouper.log.performance.info.on.GroupSave = false

# if log performance info on StemSave
# set in log4j2.xml: log4j.logger.edu.internet2.middleware.grouper.util.PerformanceLogger = INFO
# {valueType: "boolean", required: true}
grouper.log.performance.info.on.StemSave = false

# if log performance info on Stem view screen
# set in log4j2.xml: log4j.logger.edu.internet2.middleware.grouper.util.PerformanceLogger = INFO
# {valueType: "boolean", required: true}
grouper.log.performance.info.on.StemUiView = false

# if log performance info on Stem more actions
# set in log4j2.xml: log4j.logger.edu.internet2.middleware.grouper.util.PerformanceLogger = INFO
# {valueType: "boolean", required: true}
grouper.log.performance.info.on.StemUiMoreActions = false

# if log performance info on left tree menu
# set in log4j2.xml: log4j.logger.edu.internet2.middleware.grouper.util.PerformanceLogger = INFO
# {valueType: "boolean", required: true}
grouper.log.performance.info.on.UiTreeMenu = false

#####################################
## Misc settings which probably dont need to be changed
#####################################

# dao factory has no other options and shouldnt be changed
# {valueType: "class", required: true, mustExtendClass: "edu.internet2.middleware.grouper.misc.GrouperDAOFactory"}
dao.factory = edu.internet2.middleware.grouper.internal.dao.hib3.Hib3DAOFactory

# if tables that are hibernated should have optimistic locking or not (assumes the data layer supports this, hibernate does)
# {valueType: "boolean", required: true}
dao.optimisticLocking = true

# set the API as readonly (e.g. during upgrades).  Any updates will throw an exception
# {valueType: "boolean", required: true}
grouper.api.readonly = false

# When searching for memberships using the getMemberships WS (or underlying API call), limit the number of memberships
# which can be returned, else throws exception.  -1 means dont check.
# {valueType: "integer", required: true}
ws.getMemberships.maxResultSize = 30000

# When searching for memberships using the getMemberships WS (or underlying API call), limit the page size
# which can be returned, else throws exception.
# {valueType: "integer", required: true}
ws.getMemberships.maxPageSize = 500

# When searching for attribute assignments using the getAttributeAssignments WS (or underlying API call), limit the number of assignments
# which can be returned, else throws exception.  -1 means dont check.
# {valueType: "integer", required: true}
ws.findAttrAssignments.maxResultSize = 30000

# When searching attribute def names, this is max size
# {valueType: "integer", required: true}
findAllAttributeDefNames.maxResultSize = 30000

# create the type and attribuute for membership lite ui config by group
# {valueType: "boolean", required: true}
membershipUpdateLiteTypeAutoCreate = false

# default min idIndex
# {valueType: "integer", required: true}
grouperTableIndexDefaultMinIndex = 1000000

# min idIndex for groups
# {valueType: "integer", required: true}
grouper.tableIndex.group.minIndex = 1000000

# min idIndex for folders
# {valueType: "integer", required: true}
grouper.tableIndex.stem.minIndex = 1000000

# min idIndex for attributeDefs
# {valueType: "integer", required: true}
grouper.tableIndex.attributeDef.minIndex = 1000000

# min idIndex for attributeDefNames
# {valueType: "integer", required: true}
grouper.tableIndex.attributeDefName.minIndex = 1000000

# verify that table indexes are set and the pointers are ok, incurs a bit of overhead to grouper startup
# {valueType: "boolean", required: true}
grouper.tableIndex.verifyOnStartup = true

# in different circumstances, retrieve a different number of IDs at once.
# if it is a system where the JVM is starting and stopping (e.g. GSH), then
# dont reserve that many at once
# {valueType: "integer", required: true}
grouper.tableIndex.reserveIdsGsh = 1

# in different circumstances, retrieve a different number of IDs at once.
# if it is a system where the JVM is starting and stopping (e.g. GSH), then
# dont reserve that many at once
# {valueType: "integer", required: true}
grouper.tableIndex.reserveIdsDefault = 10

# in different circumstances, retrieve a different number of IDs at once.
# if it is a system where the JVM is starting and stopping (e.g. GSH), then
# dont reserve that many at once
# {valueType: "integer", required: true}
grouper.tableIndex.reserveIdsLoader = 10

# in different circumstances, retrieve a different number of IDs at once.
# if it is a system where the JVM is starting and stopping (e.g. GSH), then
# dont reserve that many at once
# {valueType: "integer", required: true}
grouper.tableIndex.reserveIdsWs = 10

# in different circumstances, retrieve a different number of IDs at once.
# if it is a system where the JVM is starting and stopping (e.g. GSH), then
# dont reserve that many at once
# {valueType: "integer", required: true}
grouper.tableIndex.reserveIdsUi = 10

# group who can assign id index cols (also, wheel or root is allowed)
# {valueType: "group"}
grouper.tableIndex.groupWhoCanAssignIdIndex = $$grouper.rootStemForBuiltinObjects$$:canAssignIdIndex

# number of bytes in DB that a non ascii char takes
# {valueType: "integer", required: true}
grouper.nonAsciiCharDbBytesLength = 3

# cache size for jexl expressions
# {valueType: "integer", required: true}
jexl.cacheSize = 1024

# when reading writing files from util classes, this is encoding (was ISO-8859-1)
# {valueType: "string"}
grouper.default.fileEncoding = UTF-8

# if you want a checkbox to not let users add themself to a group
# {valueType: "boolean", requiresRestart: "true"}
grouper.enable.rule.cannotAddSelfToGroup = false

# if you do not want non sysadmins to be able to add EveryEntity to a group or privilege
# {valueType: "boolean", requiresRestart: "true"}
grouper.enable.rule.cannotAddEveryEntity = false

# if you want group admins to be able to assign cannotAddSelf
# {valueType: "boolean"}
grouper.cannotAddSelfToGroup.allowAssignByGroupAdmins = true

# if group admins are not allowed to assign cannotAddSelf, then this group can, if blank then only Grouper admins can assign
# {valueType: "string"}
grouper.cannotAddSelfToGroup.groupCanAssignByGroupAdmins = $$grouper.rootStemForBuiltinObjects$$:cannotAddSelfToGroup:canAssignCannotAddSelf

# if you want group admins to be able to revoke cannotAddSelf
# {valueType: "boolean"}
grouper.cannotAddSelfToGroup.allowRevokeByGroupAdmins = false

# if group admins are not allowed to revoke cannotAddSelf, then this group can, if blank then only Grouper admins can revoke
# {valueType: "string"}
grouper.cannotAddSelfToGroup.groupCanRevokeByGroupAdmins = $$grouper.rootStemForBuiltinObjects$$:cannotAddSelfToGroup:canRevokeCannotAddSelf

# find bad memberships batch size
# {valueType: "integer", defaultValue: "1"}
findBadMemberships.batchSize =

#####################################
## Testing settings
#####################################

# if the ldappc tests should be included when running all tests (default false)
# {valueType: "boolean", required: true}
junit.test.ldappc = false

# if the loader tests should be included when running all tests (default true)
# {valueType: "boolean", required: true}
junit.test.loader = true

# if the tableSync tests should be included when running all tests (default true)
# {valueType: "boolean", required: true}
junit.test.tableSync = true

# if the ddl tests should be included when running all tests (default true)
# {valueType: "boolean", required: true}
junit.test.ddl = true

# if the sql provisioning tests should be included when running all tests (default false)
# {valueType: "boolean", required: true}
junit.test.sqlProvisioning = false

# if the gsh tests should be included when running all tests (default false)
# {valueType: "boolean", required: true}
junit.test.gsh = false

# if the stress tests should be included when running all tests (default false)
# {valueType: "boolean", required: true}
junit.test.stress = false

# if test client configs which requires hardcoded filenames
# {valueType: "boolean", required: true}
junit.test.clientConfig = false

# if grouper should run tests that require tomcat
# {valueType: "boolean", defaultValue: "false"}
junit.test.tomcat =

# if the external subject tests should be included when running all tests, note you need the jabber attribute in the view (default false)
# {valueType: "boolean", required: true}
junit.test.externalSubjects = false

# if the group sync should be tested... note you need the demo server available to test this, or change some settings...
# {valueType: "boolean", required: true}
junit.test.groupSync = false

# unit test group sync url
# {valueType: "string"}
junit.test.groupSync.url = https://grouperdemo.internet2.edu/grouper-ws_v2_0_0/servicesRest

# unit test group sync user
# {valueType: "string"}
junit.test.groupSync.user = remoteUser

# unit test group sync password
# {valueType: "password", sensitive: true}
junit.test.groupSync.password = R:/pass/grouperDemoRemoteUser.pass

# unti test group sync folder
#folder where the user can create/stem which the user can use to run tests
# {valueType: "stem"}
junit.test.groupSync.folder = test2:whateverFolder

#this is true unless testing to an older grouper which doesnt support this
# {valueType: "boolean", required: true}
junit.test.groupSync.pushAddExternalSubjectIfNotExist = true

# create remote folder if not exists
# {valueType: "boolean", required: true}
junit.test.groupSync.createRemoteFolderIfNotExist = true

# remote source id
# {valueType: "string"}
junit.test.groupSync.remoteSourceId = grouperExternal

# identifier for remote subject read
# {valueType: "string"}
junit.test.groupSync.remoteReadSubjectId = identifier

# identifier for remote subject write
# {valueType: "string"}
junit.test.groupSync.remoteWriteSubjectId = identifier

# to test this setup the source and set this to true
# {valueType: "boolean", required: true}
junit.test.ldap.source = false

# make sure docker is there
# {valueType: "boolean", required: true}
junit.test.ldap.dinkel = false

# these tests work locally but not on CI server
# {valueType: "boolean", required: true}
junit.test.databaseCache = false

# command to start tomcat for unit tests,
# e.g. cmd /c C:/mchyzer/tomcatJunit/bin/startup.bat
# e.g. bash /some/where/tomcat/startup.sh
# set to "none" and you have 10 seconds to start it on prompt
# {valueType: "string"}
junit.test.tomcat.startCommand =

# command to stop tomcat for unit tests,
# e.g. cmd /c C:/mchyzer/tomcatJunit/bin/shutdown.bat
# e.g. bash /some/where/tomcat/shutdown.sh
# set to "none" and you have 10 seconds to stop it on prompt
# {valueType: "string"}
junit.test.tomcat.stopCommand =

# http port to look for to see if tomcat has started, e.g. 8500
# {valueType: "integer", defaultValue: "8080"}
junit.test.tomcat.port = 8080

# ip address for tomcat
# {valueType: "string", defaultValue: "0.0.0.0"}
junit.test.tomcat.ipAddress = 0.0.0.0

# domain name for tomcat
# {valueType: "string", defaultValue: "localhost"}
junit.test.tomcat.domainName = localhost

# if should wait for tomcat start command to return (unix?) or spawn a thread (windows?)
# {valueType: "boolean"}
junit.test.tomcat.waitForProcessReturn =

# if this is ssl
# {valueType: "boolean", defaultValue: "false"}
junit.test.tomcat.ssl =

# sleep on startup to wait for ldap
# {valueType: "integer", defaultValue: "14000"}
junit.test.ldapSleepMillisOnTestStartup =

#####################################
## Attribute framework
#####################################

# root stem in grouper where built in attributes are put
# {valueType: "stem"}
grouper.attribute.rootStem = $$grouper.rootStemForBuiltinObjects$$:attribute

# comma separated names of attribute defs will not be audited or change log or point in time
# same as ${edu.internet2.middleware.grouper.cfg.GrouperConfig.retrieveConfig().propertyValueStringRequired('grouper.attribute.rootStem')}
# e.g. $$grouper.attribute.rootStem$$:userData:grouperUserDataValueDef
# note: some of these are hard coded in GrouperConfig.java
# {valueType: "attributeDef", multiple: true}
grouper.attribute.namesOfAttributeDefsToIgnoreAuditsChangeLogPit =

# comma separated names of attribute def names will not be audited or change log or point in time
# note: some of these are hard coded in GrouperConfig.java
# e.g. $$grouper.attribute.rootStem$$:attestation:attestationCalculatedDaysLeft
# {valueType: "attributeDefName", multiple: true}
grouper.attribute.namesOfAttributeDefNamesToIgnoreAuditsChangeLogPit =

# allow every entity to be able to read and assign subject identifiers to local entities they own
# note: there is also: grouper.permissions.limits.builtin.createAs.public
# {valueType: "boolean", required: true}
grouper.attribute.allow.everyEntity.privileges = false

#####################################
## Centrally managed permissions
#####################################

# if the permissions limits should be readable and updatable by GrouperAll (set when created)...
# note there is also: grouper.attribute.allow.everyEntity.privileges
# {valueType: "boolean", required: true}
grouper.permissions.limits.builtin.createAs.public = false

# text amount less than
# {valueType: "string"}
grouper.permissions.limits.builtin.displayExtension.limitAmountLessThan = amount less than

# text amount less than equal to
# {valueType: "string"}
grouper.permissions.limits.builtin.displayExtension.limitAmountLessThanOrEqual = amount less than or equal to

# text expression
# {valueType: "string"}
grouper.permissions.limits.builtin.displayExtension.limitExpression = Expression

# text ip address on network realm
# {valueType: "string"}
grouper.permissions.limits.builtin.displayExtension.limitIpOnNetworkRealm = ipAddress on network realm

# text ip address on networks
# {valueType: "string"}
grouper.permissions.limits.builtin.displayExtension.limitIpOnNetworks = ipAddress on networks

# text labels contain
# {valueType: "string"}
grouper.permissions.limits.builtin.displayExtension.limitLabelsContain = labels contains

# text weekday 9 to 5
# {valueType: "string"}
grouper.permissions.limits.builtin.displayExtension.limitWeekday9to5 = Weekday 9 to 5

# el classes to add to the el context for a limitExpression.  Comma-separated fully qualified classnames
# {valueType: "class", multiple: true}
grouper.permissions.limits.el.classes =

# permission limits linked to subclasses of edu.internet2.middleware.grouper.permissions.limits.PermissionLimitBase by the name of the attribute (the attributeDefName not the attributeDef)) mutually exclusive with limitNameOfAttributeDef
# {valueType: "string", regex: "^grouper\\.permissions\\.limits\\.logic\\.([^.]+)\\.limitName$"}
# grouper.permissions.limits.logic.someName.limitName =

# permission limits where all attribute names for the limit attribute def should be configured mutually exclusive with limitName
# {valueType: "string", regex: "^grouper\\.permissions\\.limits\\.logic\\.([^.]+)\\.limitNameOfAttributeDef$"}
# grouper.permissions.limits.logic.someName.limitNameOfAttributeDef =

# permission limits linked to subclasses of edu.internet2.middleware.grouper.permissions.limits.PermissionLimitBase
# {valueType: "class", regex: "^grouper\\.permissions\\.limits\\.logic\\.([^.]+)\\.logicClass$", mustExtendClass: "edu.internet2.middleware.grouper.permissions.limits.PermissionLimitBase"}
# grouper.permissions.limits.logic.someName.logicClass =

# if you are doing ip address limits, you can put realms here
# {valueType: "string", multiple: true, regex: "^grouper\\.permissions\\.limits\\.realm\\.([^.]+)$"}
# grouper.permissions.limits.realm.someName = 1.2.3.4/24, 2.3.4.5/16

#####################################
## External subjects
#####################################

# Use new UI to self register external users
# {valueType: "boolean", required: true}
externalSubject.selfRegister.useNewUI = true

#manages the description of a user automatically
# {valueType: "string"}
externalSubjects.desc.el = ${grouperUtil.appendPrefixIfStringNotBlank('[unverifiedInfo]', ' ', grouperUtil.appendIfNotBlankString(externalSubject.name, ' - ', externalSubject.institution))} [externalUserID] ${externalSubject.identifier}

#search and sort strings added to member objects, increment the index to add multiple
# {valueType: "string", regex: "^externalSubjects\\.searchAttribute([0-9]+)\\.el$"}
externalSubjects.searchAttribute0.el = ${subject.name},${subjectUtils.defaultIfBlank(subject.getAttributeValue("institution"), "")},${subjectUtils.defaultIfBlank(subject.getAttributeValue("identifier"), "")},${subject.id},${subjectUtils.defaultIfBlank(subject.getAttributeValue("email"), "")}

# external subject sort attribute, increment the index to add multiple
# {valueType: "string", regex: "^externalSubjects\\.sortAttribute([0-9]+)\\.el$"}
externalSubjects.sortAttribute0.el = ${subject.name}

# external subject sort attribute, increment the index to add multiple
# {valueType: "string"}
externalSubjects.sortAttribute1.el = ${subjectUtils.defaultIfBlank(subject.getAttributeValue("identifier"), "")}

# external subject sort attribute, increment the index to add multiple
# {valueType: "string"}
externalSubjects.sortAttribute2.el = ${subjectUtils.defaultIfBlank(subject.getAttributeValue("institution"), "")}

# false if the description should be managed via EL (config above)
# {valueType: "boolean", required: true}
externalSubjects.desc.manual = false

# external subject name required
# {valueType: "boolean", required: true}
externalSubjects.name.required = true

# external subject email required
# {valueType: "boolean", required: true}
externalSubjects.email.required = false

# external subject email enabled
# {valueType: "boolean", required: true}
externalSubjects.email.enabled = true

# these field names (uuid, institution, identifier, uuid, email, name) or attribute names
# will be toLowered, and appended with comma separators.  e.g. if you add attributes, add them here too
# {valueType: "string", multiple: true}
externalSubjects.searchStringFields = name, institution, identifier, uuid, email

# external subject institution required
# {valueType: "boolean", required: true}
externalSubjects.institution.required = false

# external subject institution enabled
# {valueType: "boolean", required: true}
externalSubjects.institution.enabled = true

# note, this must be only alphanumeric lower case or underscore
# (valid db column name, subject attribute name)
# {valueType: "string", regex: "^externalSubjects\\.attributes\\.([^.]+)\\.systemName$"}
# externalSubjects.attributes.jabber.systemName = jabber

# if the external subject attribute is required
# {valueType: "boolean", regex: "^externalSubjects\\.attributes\\.([^.]+)\\.required$"}
# externalSubjects.attributes.jabber.required = false

# comment on column in DB (no special characters allowed)
# {valueType: "string", regex: "^externalSubjects\\.attributes\\.([^.]+)\\.comment$"}
# externalSubjects.attributes.jabber.comment = The jabber ID of the user

# if wheel or root can edit external users
# {valueType: "boolean", required: true}
externalSubjects.wheelOrRootCanEdit = true

# group which is allowed to edit external users
# {valueType: "group", required: true}
externalSubjects.groupAllowedForEdit =

# if the view on the external subjects should be created.
# turn this off if it doesnt compile, othrewise should be fine
# {valueType: "boolean", required: true}
externalSubjects.createView = true

#name of external subject source, defaults to grouperExternal
# {valueType: "string"}
externalSubject.sourceId = grouperExternal

# external subject source name
# {valueType: "string"}
externalSubject.sourceName = External Users

# grouper can auto create a jdbc2 source for the external subjects
# {valueType: "boolean", required: true}
externalSubjects.autoCreateSource = true

# put in fully qualified classes to add to the EL context.  Note that they need a default constructor
# comma separated.  The alias will be the simple class name without a first cap.
# e.g. if the class is test.Test the alias is "test"
# {valueType: "class", required: true, multiple: true}
externalSubjects.customElClasses =

# change these to affect the storage where external subjects live (e.g. to store in ldap),
# must implement each respective storable interface
# {valueType: "class", mustImplementInterface: "edu.internet2.middleware.grouper.externalSubjects.ExternalSubjectStorable"}
externalSubjects.storage.ExternalSubjectStorable.class = edu.internet2.middleware.grouper.externalSubjects.ExternalSubjectDbStorage

# change these to affect the storage where external subjects live (e.g. to store in ldap),
# must implement each respective storable interface
# {valueType: "class", mustImplementInterface: "edu.internet2.middleware.grouper.externalSubjects.ExternalSubjectAttributeStorable"}
externalSubjects.storage.ExternalSubjectAttributeStorable.class = edu.internet2.middleware.grouper.externalSubjects.ExternalSubjectAttributeDbStorage

# you can use the variables $newline$, $inviteLink$.  Note, you need to change this default message...
# {valueType: "string"}
externalSubjectsInviteDefaultEmail = Hello,$newline$$newline$This is an invitation to register at our site to be able to access our applications.  This invitation expires in 7 days.  Click on the link below and sign in with your InCommon credentials.  If you do not have InCommon credentials you can register at a site like protectnetwork.org and use those credentials.$newline$$newline$$inviteLink$$newline$$newline$Regards.

# default subject for email
# {valueType: "string"}
externalSubjectsInviteDefaultEmailSubject = Register to access applications

# you can use the variables $newline$, $inviteeIdentifier$, $inviteeEmailAddress$.  Note, you need to change this default message...
# {valueType: "string"}
externalSubjectsNotifyInviterEmail = Hello,$newline$$newline$This is a notification that user $inviteeIdentifier$ from email address $inviteeEmailAddress$ has registered with the identity management service.  They can now use applications at this institution.$newline$$newline$Regards.

# {valueType: "string"}
externalSubjectsNotifyInviterSubject = $inviteeIdentifier$ has registered

# numner of days after which this request will expire.  If -1, then will not expire
# {valueType: "integer", required: true}
externalSubjectsInviteExpireAfterDays = 7

#put some group names comma separated for groups to auto add subjects to
# {valueType: "group", multiple: true}
externalSubjects.autoaddGroups=

#should be insert, or update, or insert,update
# {valueType: "string", multiple: true}
externalSubjects.autoaddGroupActions=insert,update

#if a number is here, expire the group assignment after a certain number of days
# {valueType: "integer"}
externalSubjects.autoaddGroupExpireAfterDays=

# add multiple group assignment actions by URL param: externalSubjectInviteName
# {valueType: "string", regex: "^externalSubjects\\.autoadd\\.([^.]+)\\.externalSubjectInviteName$"}
#externalSubjects.autoadd.testingLibrary.externalSubjectInviteName=library

# comma separated groups to add for this type of invite
# {valueType: "group", multiple: true, regex: "^externalSubjects\\.autoadd\\.([^.]+)\\.groups$"}
#externalSubjects.autoadd.testingLibrary.groups=

# should be insert, update, or insert,update
# {valueType: "string", multiple: true, regex: "^externalSubjects\\.autoadd\\.([^.]+)\\.groups$"}
#externalSubjects.autoadd.testingLibrary.actions=insert,update

# expire after days
# {valueType: "integer", regex: "^externalSubjects\\.autoadd\\.([^.]+)\\.groups$"}
#externalSubjects.autoadd.testingLibrary.expireAfterDays=

#if registrations are only allowed if invited or existing...
# {valueType: "boolean", required: true}
externalSubjects.registerRequiresInvite=true

#make sure the identifier when logging in is like an email address or eppn, e.g. [email protected]
# {valueType: "boolean", required: true}
externalSubjects.validateIndentiferLikeEmail=true

#put regexes here, increment the 0 for multiple entries, e.g. restrict your own institution
#note, the extensions must be sequential (dont skip), regex e.g. ^.*@myschool\\.edu$
# {valueType: "string", regex: "^externalSubjects\\.regexForInvalidIdentifier\\.([0-9]+)$"}
externalSubjects.regexForInvalidIdentifier.0=

#####################################
## Org management
#####################################

# if the orgs table(s) should be included in the DDL (includes the hierarchical table
# {valueType: "boolean", required: true}
orgs.includePocOrgsTablesInDdl = false

# loader connection of the database where orgs are (grouper means the grouper db in grouper.hibernate.properties)
# {valueType: "string"}
orgs.databaseName = grouper

#table name of the org table (can prefix by schema name if you like)
# {valueType: "string"}
orgs.orgTableName = grouperorgs_poc_orgs

#column names of this table
# {valueType: "string"}
orgs.orgIdCol = id

# column of org name
# {valueType: "string"}
orgs.orgNameCol = org_name

# column of org display name
# {valueType: "string"}
orgs.orgDisplayNameCol = org_display_name

# column or org parent id
# {valueType: "string"}
orgs.orgParentIdCol = parent_id

# stem where the orgs are, e.g. poc:orgs
# {valueType: "stem"}
orgs.parentStemName = poc:orgs

#org config name
# {valueType: "group"}
orgs.configGroupName = poc:orgs:orgsConfig

######################################
## Grouper client connections
## if this grouper needs to talk to another grouper, this is the client connection information
######################################

# id of the source, should match the part in the property name
# {valueType: "string", regex: "^grouperClient\\.([^.]+)\\.id$"}
#grouperClient.someOtherSchool.id = someOtherSchool

# url of web service, should include everything up to the first resource to access
# e.g. https://groups.school.edu/grouperWs/servicesRest
# {valueType: "string", regex: "^grouperClient\\.([^.]+)\\.properties\\.grouperClient\\.webService\\.url$"}
#grouperClient.someOtherSchool.properties.grouperClient.webService.url = https://some.other.school.edu/grouperWs/servicesRest

# login ID
# {valueType: "string", regex: "^grouperClient\\.([^.]+)\\.properties\\.grouperClient\\.webService\\.login$"}
#grouperClient.someOtherSchool.properties.grouperClient.webService.login = someRemoteLogin

# password for shared secret authentication to web service
# or you can put a filename with an encrypted password
# {valueType: "password", sensitive: true, regex: "^grouperClient\\.([^.]+)\\.properties\\.grouperClient\\.webService\\.password$"}
#grouperClient.someOtherSchool.properties.grouperClient.webService.password = *********

# client version should match or be related to the server on the other end...
# {valueType: "string", regex: "^grouperClient\\.([^.]+)\\.properties\\.grouperClient\\.webService\\.client\\.version$"}
#grouperClient.someOtherSchool.properties.grouperClient.webService.client.version = v2_0_000

# this is the subject to act as local, if blank, act as GrouperSystem, specify with SubjectFinder packed string, e.g.
# subjectIdOrIdentifier  or  sourceId::::subjectId  or  ::::subjectId  or  sourceId::::::subjectIdentifier  or  ::::::subjectIdentifier
# sourceId::::::::subjectIdOrIdentifier  or  ::::::::subjectIdOrIdentifier
# {valueType: "string", regex: "^grouperClient\\.([^.]+)\\.localActAsSubject$"}
#grouperClient.someOtherSchool.localActAsSubject =

# the id of this source, generally the same as the name in the property name.  This is mandatory
# {valueType: "string", regex: "^grouperClient\\.([^.]+)\\.source\\.([^.]+)\\.id$"}
#grouperClient.someOtherSchool.source.jdbc.id = jdbc

# the part between "grouperClient.someOtherSchool.source." and ".id" links up the configs,
# in this case, "jdbc", make sure it has no special chars.  sourceId can be blank if you dont want to specify
# {valueType: "string", regex: "^grouperClient\\.([^.]+)\\.source\\.([^.]+)\\.local\\.sourceId$"}
#grouperClient.someOtherSchool.source.jdbc.local.sourceId = jdbc

# this is the identifier that goes between them, it is "id" or an attribute name.  subjects without this attribute will not be processed
# {valueType: "string", regex: "^grouperClient\\.([^.]+)\\.source\\.([^.]+)\\.local\\.read\\.subjectId$"}
#grouperClient.someOtherSchool.source.jdbc.local.read.subjectId = identifier

# this is the identifier to lookup to add a subject, should be "id" or "identifier" or "idOrIdentifier"
# {valueType: "string", regex: "^grouperClient\\.([^.]+)\\.source\\.([^.]+)\\.local\\.write\\.subjectId$"}
#grouperClient.someOtherSchool.source.jdbc.local.write.subjectId = identifier

# sourceId of the remote system, can be blank
# {valueType: "string", regex: "^grouperClient\\.([^.]+)\\.source\\.([^.]+)\\.remote\\.sourceId$"}
#grouperClient.someOtherSchool.source.jdbc.remote.sourceId = jdbc

# this is the identifier that goes between them, it is "id" or an attribute name.  subjects without this attribute will not be processed
# {valueType: "string", regex: "^grouperClient\\.([^.]+)\\.source\\.([^.]+)\\.remote\\.read\\.subjectId$"}
#grouperClient.someOtherSchool.source.jdbc.remote.read.subjectId =

# this is the identifier to lookup to add a subject, should be "id" or "identifier" or "idOrIdentifier"
# {valueType: "string", regex: "^grouperClient\\.([^.]+)\\.source\\.([^.]+)\\.remote\\.write\\.subjectId$"}
#grouperClient.someOtherSchool.source.jdbc.remote.write.subjectId =




######################################
## Sync to/from another grouper
## Only sync one group to one other group, do not sync one group to
## two report groupers.  If you need to do this, add the group to another group
######################################

# we need to know where our
# connection name in grouper client connections above
# {valueType: "string", regex: "^syncAnotherGrouper\\.([^.]+)\\.connectionName$"}
#syncAnotherGrouper.testGroup0.connectionName = someOtherSchool

# incremental  or  push  or   pull  or  incremental_push.  Note, incremental push is cron'ed and incremental (to make sure no discrepancies arise)
# {valueType: "string", regex: "^syncAnotherGrouper\\.([^.]+)\\.syncType$"}
#syncAnotherGrouper.testGroup0.syncType = incremental_push

# local group which is being synced
# {valueType: "group", regex: "^syncAnotherGrouper\\.([^.]+)\\.local\\.groupName$"}
#syncAnotherGrouper.testGroup0.local.groupName = test:testGroup

# remote group at another grouper which is being synced
# {valueType: "string", regex: "^syncAnotherGrouper\\.([^.]+)\\.remote\\.groupName$"}
#syncAnotherGrouper.testGroup0.remote.groupName = test2:testGroup2

# if subjects are external and should be created if not exist
# {valueType: "string", regex: "^syncAnotherGrouper\\.([^.]+)\\.addExternalSubjectIfNotFound$"}
#syncAnotherGrouper.testGroup0.addExternalSubjectIfNotFound = true


###########################################
## Text bundles for UI
###########################################

# the default index
# {valueType: "integer"}
grouper.text.defaultBundleIndex = 0

# language for this bundle
# {valueType: "string", regex: "^grouper.text.bundle.([0-9]+).language$"}
grouper.text.bundle.0.language = en

# country for this bundle
# {valueType: "string", regex: "^grouper.text.bundle.([0-9]+).country$"}
grouper.text.bundle.0.country = us

# filename in the package grouperText that is before the .base.properties, and .properties
# {valueType: "string", regex: "^grouper.text.bundle.([0-9]+).fileNamePrefix$"}
grouper.text.bundle.0.fileNamePrefix = grouperText/grouper.textNg.en.us


###################################
## User data settings
###################################

# amount of time to cache groups in use
# {valueType: "integer", required: true}
grouperUserData.group.cache.seconds = 120


######################################
## Legacy attributes
######################################

# legacy attribute base stem
# {valueType: "stem"}
legacyAttribute.baseStem=$$grouper.rootStemForBuiltinObjects$$:legacy:attribute

# legacy attribute prefix for group types
# {valueType: "string"}
legacyAttribute.groupTypeDef.prefix=legacyGroupTypeDef_

# legacy attribute prefix for attribute definitions
# {valueType: "string"}
legacyAttribute.attributeDef.prefix=legacyAttributeDef_

# legacy custom list def prefix
# {valueType: "string"}
legacyAttribute.customListDef.prefix=legacyCustomListDef_

# legacy attribute group type prefix
# {valueType: "string"}
legacyAttribute.groupType.prefix=legacyGroupType_

# legacy attribute prefix
# {valueType: "string"}
legacyAttribute.attribute.prefix=legacyAttribute_

# legacy custom list prefix
# {valueType: "string"}
legacyAttribute.customList.prefix=legacyCustomList_

# if we should use threads in legacy attribute migration
# {valueType: "boolean", required: true}
legacyAttributeMigration.useThreads = true

# if we are using threads in legacy attribute migration, this is the threads pool size
# {valueType: "integer"}
legacyAttributeMigration.threadPoolSize = 20

######################################
## Group types edit view
## Identify marker attributes or single valued string attributes to be viewed or edited on group screen
## "theConfigId" is the config ID of the attribute
######################################

# attribute name that should be able to be seen on screen, e.g. a:b:c
# {valueType: "string"}
#groupScreen.attribute.theConfigId.attributeName =

# label on the left side of screen for attribute
# {valueType: "string"}
#groupScreen.attribute.theConfigId.label =

# description on the right side of screen for attribute
# {valueType: "string"}
#groupScreen.attribute.theConfigId.description =

# numeric index of the order of the attribute on the screen
# {valueType: "integer"}
#groupScreen.attribute.theConfigId.index =



######################################
## Point in time audit
######################################

# if grouper should use threads when syncing point in time
# {valueType: "boolean", required: true}
pit.sync.useThreads = true

# grouper pit thread pool size
# {valueType: "integer", required: true}
pit.sync.threadPoolSize = 20


######################################
## Stem sets
######################################

# {valueType: "boolean", required: true}
stemSet.sync.useThreads = true

# {valueType: "integer", required: true}
stemSet.sync.threadPoolSize = 20


######################################
## Group sets
######################################

# {valueType: "boolean", required: true}
groupSet.sync.useThreads = true

# {valueType: "integer", required: true}
groupSet.sync.threadPoolSize = 20

########################
## LDAP provisioning hook
## Will add the LDAPProvisioningExclude group type to groups that shouldnt be provisioned
########################

# Increment the integer starting with 0 to add multiple.  Will add the LDAPProvisioningExclude group type to groups that shouldnt be provisioned, e.g. .*_excludes$, .*_includes$, .*_systemOfRecord$, .*_systemOfRecordAndIncludes$
# {valueType: "string", regex: "^LDAPProvisioningHook\\.exclude\\.regex\\.([0-9]+)$"}
#LDAPProvisioningHook.exclude.regex.0=.*_excludes$

#########################################
## Unresolvable Subject Deletion Utility
#########################################

# folder where system objects are for usdu
# {valueType: "stem"}
usdu.systemFolder = $$grouper.rootStemForBuiltinObjects$$:usdu

# global across all sources: Don't do anything if more than this number of unresolvable subjects are found
# {valueType: "integer", required: true}
usdu.failsafe.maxUnresolvableSubjects = 500

# global across all sources: if the first X subjects should be removed but stop after that limit: usdu.failsafe.maxUnresolvableSubjects
usdu.failsafe.removeUpToFailsafe = false

# global across all sources: only delete unresolvables if unresolvable for 30 days.  -1 means remove now
# {valueType: "integer", required: false}
usdu.delete.ifAfterDays = 30



# local to one source supersedes the global settings: source ID
# {valueType: "string", required: true, regex: "^usdu\\.source\\.([^.]+)\\.sourceId$"}
# usdu.source.someLabel.sourceId = someSourceId


# local to one source supersedes the global settings: Don't do anything if more than this number of unresolvable subjects are found
# {valueType: "integer", required: true, regex: "^usdu\\.source\\.([^.]+)\\.failsafe\\.maxUnresolvableSubjects$"}
# usdu.source.someLabel.failsafe.maxUnresolvableSubjects = 500


# local to one source supersedes the global settings: if the first X subjects should be removed but stop after that limit: usdu.failsafe.maxUnresolvableSubjects
# {valueType: "integer", required: true, regex: "^usdu\\.source\\.([^.]+)\\.failsafe\\.removeUpToFailsafe$"}
# usdu.source.someLabel.failsafe.removeUpToFailsafe = false


# local to one source supersedes the global settings: Don't do anything if more than this number of unresolvable subjects are found
# {valueType: "integer", required: true, regex: "^usdu\\.source\\.([^.]+)\\.delete\\.ifAfterDays$"}
# usdu.source.someLabel.delete.ifAfterDays = 30

########################################
## Diagnostics
## In UI and WS
########################################

#if ignore tests.  Note, in job names, invalid chars need to be replaced with underscore (e.g. colon)
#anything in this regex: [^a-zA-Z0-9._-]
# {valueType: "boolean", required: true, regex: "^ws\\.diagnostic\\.ignore\\.([a-zA-Z0-9._-]+)$"}
ws.diagnostic.ignore.memoryTest = false

#if ignore tests.  Note, in job names, invalid chars need to be replaced with underscore (e.g. colon)
#anything in this regex: [^a-zA-Z0-9._-]
# {valueType: "boolean", required: true}
ws.diagnostic.ignore.dbTest_grouper = false

#if ignore tests.  Note, in job names, invalid chars need to be replaced with underscore (e.g. colon)
#anything in this regex: [^a-zA-Z0-9._-]
# {valueType: "boolean", required: true}
ws.diagnostic.ignore.source_jdbc = false

#if ignore tests.  Note, in job names, invalid chars need to be replaced with underscore (e.g. colon)
#anything in this regex: [^a-zA-Z0-9._-]
# {valueType: "boolean", required: true}
ws.diagnostic.ignore.loader_CHANGE_LOG_changeLogTempToChangeLog = false

#if ignore sync all pit tables one timer.
#anything in this regex: [^a-zA-Z0-9._-]
# {valueType: "boolean", required: true}
ws.diagnostic.ignore.loader_OTHER_JOB_syncAllPitTables = false

#if ignore sync all set tables one timer.
#anything in this regex: [^a-zA-Z0-9._-]
# {valueType: "boolean", required: true}
ws.diagnostic.ignore.loader_OTHER_JOB_syncAllSetTables = false

# this is 52 hours... 48 for 2 days, and 4 more for the job to run.  So if the warehouse is down for updates,
# then the daily job will not give an error
# {valueType: "integer", required: true}
ws.diagnostic.defaultMinutesSinceLastSuccess = 3120

# change log can only for 30 minutes of failing before diagnostics fails
# {valueType: "integer", required: true}
ws.diagnostic.defaultMinutesChangeLog = 30

# number of minute that can go by without a success before an error is thrown
# {valueType: "integer", required: true, regex: "^ws\\.diagnostic\\.minutesSinceLastSuccess\\.([a-zA-Z0-9._-]+)$"}
ws.diagnostic.minutesSinceLastSuccess.loader_SQL_GROUP_LIST__aStem_aGroup2 = 60

# list groups which should check the size, in this case, "employee" or "students" in the key name is a variable
# {valueType: "group", required: true, regex: "^ws\\.diagnostic\\.checkGroupSize\\.([a-zA-Z0-9._-]+)\\.groupName$"}
# ws.diagnostic.checkGroupSize.employees.groupName = community:employees

# min group size of known groups
# {valueType: "integer", required: true, regex: "^ws\\.diagnostic\\.checkGroupSize\\.([a-zA-Z0-9._-]+)\\.minSize$"}
# ws.diagnostic.checkGroupSize.employees.minSize = 28000

#if a change log consumer hasn't had a success but it is running and progress is being made, treat as a success
# {valueType: "boolean", required: true}
ws.diagnostic.successIfChangeLogConsumerProgress = true

# usdu daemon minutes since success 10 days
# {valueType: "integer"}
ws.diagnostic.minutesSinceLastSuccess.loader_OTHER_JOB_usduDaemon = 14400

# allow diagnostics from these IP ranges, e.g. 1.2.3.4/32 or 2.3.4.5/24, comma separated, leave blank if available from everywhere
# {valueType: "string", multiple: true}
ws.diagnostic.sourceIpAddresses =

# if status details should be sent to the client or just logged
# {valueType: "boolean", required: true}
ws.diagnostic.sendDetailsInResponse = true


#########################################
## Instrumentation
#########################################

# if instrumentation is thread enabled
# {valueType: "boolean", required: true}
instrumentation.thread.enabled = true

# make updates in this many seconds
# {valueType: "integer", required: true}
instrumentation.updateGrouperIntervalInSeconds = 3600

# must be divisible by 3600
# {valueType: "integer", required: true}
instrumentation.updateIncrements = 3600

# you may want to use a substring instead of the full hostname (e.g. ui-01 instead of grouper-ui-01.xyz.edu) if you're sending this to TIER
# {valueType: "string", required: true}
instrumentation.serverLabel.el = ${grouperUtil.hostname()}

# number of days to retain instrumentation data.   -1 is forever.
# {valueType: "integer", required: true}
instrumentation.retainData.days=30

# number of days to retain instrumentation instances without any activity.   -1 is forever.  Only applicable if instrumentation.retainData.days is not -1.
# {valueType: "integer", required: true}
instrumentation.retainInactiveInstances.days=365

# if set, will save the instance file containing the server uuid into this directory. Otherwise, will use /opt/grouper/instrumentation
# {valueType: "string"}
#instrumentation.instanceFile.directory =

#########################################
## GSH
#########################################

# if legacy gsh should be used
# {valueType: "boolean", required: true}
gsh.useLegacy = false

# when starting gsh, whether to immediately exit if there's a problem verifying the subject source configuration and connections
# {valueType: "boolean", required: true}
gsh.exitOnSubjectCheckConfigProblem = true

# if running gsh with a file or runarg parameter and there's an error, whether to exit instead of continuing with the next command
# {valueType: "boolean", required: true}
gsh.exitOnNonInteractiveError = true

# if running gsh in an otherjob or programmatically, exit if a line has an errror
# {valueType: "boolean", required: true}
gsh.exitOnProgrammaticError = true

#########################################
## Messages
#########################################

# if a message is not marked as processed in this many seconds, then send again to be processed
# {valueType: "integer", required: true}
grouper.builtin.messaging.timeout.receive.seconds = 300

# number of seconds to sleep while waiting to see if the database has records, minimum 1
# {valueType: "integer", required: true}
grouper.builtin.messaging.polling.sleep.seconds = 5

# default page size for messages
# {valueType: "integer", required: true}
grouper.builtin.messaging.defaultPageSize = 10

# max page size for messages
# {valueType: "integer", required: true}
grouper.builtin.messaging.maxPageSize = 50

#########################################
## Attestation
#########################################

#default value of attestation days until recertify. Every group/folder can define their own days until recertify value and if they don't provide, use the following one.
# {valueType: "integer", required: true}
attestation.default.daysUntilRecertify = 180

#number of groups shown in the body of attestation email
# {valueType: "integer", required: true}
attestation.email.group.count = 100

#attestation reminder email subject
# {valueType: "string"}
attestation.reminder.email.subject = You have $objectCount$ groups and/or folders that require attestation

#attestation reminder email body (links and groups/folders are added dynamically)
# {valueType: "string"}
attestation.reminder.email.body = You need to attest the following groups and/or folders.  Review each group/folder and click the button to mark it as reviewed.

# attestation line in email when there are more than 100 emails
# {valueType: "string"}
attestation.reminder.email.body.greaterThan100 = There are $remaining$ more groups and/or folders to be attested.


###################################
## Deprovisioning
###################################

# if deprovisioning should be enabled
# {valueType: "boolean", required: true}
deprovisioning.enable = true

# comma separated affiliations for deprovisioning e.g. employee, student, etc
# these need to be alphanumeric suitable for properties keys for further config or for group extensions
# {valueType: "string"}
deprovisioning.affiliations =

# Group name of the group that identifies generally if an entity is in this affiliation. So if a group is deprovisioned
# by various affiliations, then only deprovision if the entity in the group is not in any affiliation eligible group.
# e.g. VPN is deprovisioned by affiliations employee and student. If the person is no longer an employee, but is still
# a student, then dont deprovision.
# for example deprovisioning.affiliation_.groupNameMeansInAffiliation set to a:b:c
# deprovisioning.affiliation_employee.groupNameMeansInAffiliation = community:employee

# number of minutes to cache deprovisioned members / admins
# {valueType: "integer", required: true}
deprovisioning.cacheMembersForMinutes = 5

# number of seconds to wait for refresh before giving up and using failsafe (if caching)
# {valueType: "integer", required: true}
deprovisioning.cacheFailsafeSeconds = 10

# folder where system objects are for deprovisioning
# e.g. managersWhoCanDeprovision_
# e.g. usersWhoHaveBeenDeprovisioned_
# {valueType: "stem"}
deprovisioning.systemFolder = $$grouper.rootStemForBuiltinObjects$$:deprovisioning

# autocreate the deprovisioning groups
# {valueType: "boolean", required: true}
deprovisioning.autocreate.groups = true

# default if the loader should not let deprovisioned users in that affiliation in loader jobs
# {valueType: "boolean", required: true}
deprovisioning.autoChangeLoader = true

# users in this group who are admins of a affiliation but who are not Grouper SysAdmins, will be
# able to deprovision from all grouper groups/objects, not just groups they have access to UPDATE/ADMIN
# {valueType: "group"}
deprovisioning.admin.group = $$deprovisioning.systemFolder$$:deprovisioningAdmins

# number of days in deproivisioning group.  Should be the amount of time for
# systems of record to catch up and
# for people to change external systems of record in manual processes
# {valueType: "integer", required: true}
deprovisioning.defaultNumberOfDaysInDeprovisioningGroup = 14

#number of objects shown in the body of deprovisioning email
# {valueType: "integer", required: true}
deprovisioning.email.object.count = 100

#deprovisioning reminder email subject
# {valueType: "string"}
deprovisioning.reminder.email.subject = You have $objectCount$ objects that have suggested users to be deprovisioned

#deprovisioning reminder email body (links and groups are added dynamically)
# {valueType: "string"}
deprovisioning.reminder.email.body = You need to review the memberships of the following objects.  Review the memberships of each object and click: Group actions -> Deprovisioning -> Members of this object have been reviewed

# deprovisioning email line when there are more than 100 objects to be reviewed
# {valueType: "string"}
deprovisioning.reminder.email.body.greaterThan100 = There are $remaining$ more objects to be reviewed.


###################################
## Grouper object types
###################################

# if object types should be enabled
# {valueType: "boolean", required: true}
objectTypes.enable = true

# folder where system objects are for objectTypes
# {valueType: "stem"}
objectTypes.systemFolder = $$grouper.rootStemForBuiltinObjects$$:objectTypes

# maximum groups/stems to show when suggesting auto assign types
# {valueType: "integer"}
objectTypes.max.autoAssign.objectCount = 2000

###################################
## Grouper workflow approvals
###################################

# if workflow should be enabled
# {valueType: "boolean", required: true}
workflow.enable = true

# folder where system objects are for workflow
# {valueType: "stem"}
workflow.systemFolder = $$grouper.rootStemForBuiltinObjects$$:workflow

# workflow editors group name
# {valueType: "group"}
workflow.editorsGroup = $$grouper.rootStemForBuiltinObjects$$:workflowEditors

# workflow config types. comma separated list. grouper must be in the list
# {valueType: "string"}
workflow.configTypes = grouper

# workflow storage option. valid values are database, fileSystem or S3
# {valueType: "string", required: true}
workflow.storage.option = database

# file system path where worklow files will be stored, e.g. /opt/grouper/workflow
# {valueType: "string", required: false}
workflow.file.system.path = /tmp/grouper/workflow

# grouper workflow s3 bucket name where the files will be uploaded
# {valueType: "string", required: false}
workflow.s3.bucket.name =

# grouper workflow s3 region e.g. us-west-2
# {valueType: "string", required: false}
workflow.s3.region =

# grouper workflow s3 access key
# {valueType: "string", required: false}
workflow.s3.access.key =

# grouper workflow s3 secret key
# {valueType: "string", required: false}
workflow.s3.secret.key =

#grouper workflow email subject
# {valueType: "string"}
workflow.email.subject = Report $$reportConfigName$$ generated

#grouper workflow email body.  Can use variables
# {valueType: "string"}
workflow.email.body = Hello $$subjectName$$, \n\n Report $$reportConfigName$$ has been generated. Download the report: $$reportLink$$ \n\n Thanks


#########################################
## Provisioning in UI
#########################################

# if provisioning in ui should be enabled
# {valueType: "boolean", required: true}
provisioningInUi.enable = true

# folder where system objects are for provisioning
# {valueType: "stem"}
provisioningInUi.systemFolder = $$grouper.rootStemForBuiltinObjects$$:provisioning

# key for target
# {valueType: "string"}
#provisioning.target.pspngLdap1.key = pspngLdap1Key

# members of this group, wheel group members and system user are allowed to assign this target
# {valueType: "group"}
#provisioning.target.pspngLdap1.groupAllowedToAssign =

# should this target be assigned to only one stem
# {valueType: "boolean", required: false}
#provisioning.target.pspngLdap1.allowAssignmentsOnlyOnOneStem = false

# should this target be read only
# {valueType: "boolean", required: false}
#provisioning.target.pspngLdap1.readOnly = false

######################################
## Grouper Reporting
######################################

# folder where system objects are for reporting config
# {valueType: "stem"}
reportConfig.systemFolder = $$grouper.rootStemForBuiltinObjects$$:reportConfig

# if grouper reporting should be enabled
# {valueType: "boolean", required: true}
grouperReporting.enable = true

# grouper reporting storage option. valid values are database, fileSystem or S3
# {valueType: "string", required: true}
reporting.storage.option = database

# grouper reporting file system path where reports will be stored, e.g. /opt/grouper/reports
# {valueType: "string", required: false}
reporting.file.system.path =

# grouper reporting s3 bucket name where the reports will be uploaded
# {valueType: "string", required: false}
reporting.s3.bucket.name =

# grouper reporting s3 bucket name where the reports will be uploaded, e.g. us-west-2
# {valueType: "string", required: false}
reporting.s3.region =

# grouper reporting s3 access key
# {valueType: "string", required: false}
reporting.s3.access.key =

# grouper reporting s3 secret key
# {valueType: "string", required: false}
reporting.s3.secret.key =

#grouper reporting email subject
# {valueType: "string"}
reporting.email.subject = Report $$reportConfigName$$ generated

#grouper reporting email body.  Can use variables
# {valueType: "string"}
reporting.email.body = Hello $$subjectName$$, \n\n Report $$reportConfigName$$ has been generated. Download the report: $$reportLink$$ \n\n Thanks

#########################################
## LDAP
#########################################

# you shouldnt need to change this, but this is the implementation of the
# ldap sessions.  examples are:
# edu.internet2.middleware.grouper.ldap.ldaptive.LdaptiveSessionImpl (must be this)
# ${valueType: "class", mustImplementInterface: "edu.internet2.middleware.grouper.ldap.LdapSession"}
ldap.implementation.className = edu.internet2.middleware.grouper.ldap.ldaptive.LdaptiveSessionImpl


#########################################
## Custom composites
## This feature allows users to easily do a custom intersection or complement on their group with another group when viewing the members in the Grouper UI.
## Define your custom composites in the override configuration.  Users must have READ privilege on the group.
#########################################

# Each custom composite also needs to be defined in the Grouper UI text properties in order to provide a friendly description in the UI.  customCompositeMinusEmployees and customCompositeIntersectIt are also defined as examples there.
# {valueType: "string", regex: "^grouper\\.membership\\.customComposite\\.uiKey\\.\\d+$"}
# grouper.membership.customComposite.uiKey.0 = customCompositeMinusEmployees

# complement or intersection
# {valueType: "string", regex: "^grouper\\.membership\\.customComposite\\.compositeType\\.\\d+$"}
# grouper.membership.customComposite.compositeType.0 = complement

# {valueType: "group", regex: "^grouper\\.membership\\.customComposite\\.groupName\\.\\d+$"}
# grouper.membership.customComposite.groupName.0 = ref:activeEmployees



#########################################
## Custom veto composites membership requirement
## This feature allows users to auto-veto ineligible members or remove them when they become ineligible.
## Note that each custom composite also needs to be defined in the Grouper UI text properties in order
## to provide a friendly description in the UI.  customCompositeMinusEmployees and customCompositeIntersectIt are also defined as examples there.
#########################################

# how long should logs of membership requirement logs be stored in database?
# {valueType: "integer", regex: "^grouper\\.membershipRequirement\\.keepLogsForDays$"}
grouper.membershipRequirement.keepLogsForDays = 90

# should hook for membership veto be enabled
# {valueType: "boolean", regex: "^grouper\\.membershipRequirement\\.hookEnable$"}
grouper.membershipRequirement.hookEnable = true

# should changeLog for membership veto change log be enabled in general
# {valueType: "boolean", regex: "^grouper\\.membershipRequirement\\.changeLogEnable$"}
grouper.membershipRequirement.changeLogEnable = true

# ui key to externalize text
# {valueType: "string", regex: "^grouper\\.membershipRequirement\\.[^.]+\\.uiKey$"}
#grouper.membershipRequirement.someConfigId.uiKey = customVetoCompositeRequireEmployee

# attribute name that signifies this requirement
# {valueType: "string", regex: "^grouper\\.membershipRequirement\\.[^.]+\\.attributeName$"}
#grouper.membershipRequirement.someConfigId.attributeName = etc:attribute:customComposite:requireEmployee

# group name which is the population group
# {valueType: "group", regex: "^grouper\\.membershipRequirement\\.[^.]+\\.requireGroupName$"}
#grouper.membershipRequirement.someConfigId.requireGroupName = org:centralIt:staff:itStaff

# if the overall hook is enabled, is the hook for this specific config enabled?  defaults to true.
# {valueType: "boolean", regex: "^grouper\\.membershipRequirement\\.[^.]+\\.hookEnable$"}
#grouper.membershipRequirement.someConfigId.hookEnable = true

#########################################
## Unique extension in folder hook
#########################################

# comma separated folder names (id path).  Configure multiple with different config ids
# {valueType: "string", regex: "^groupUniqueExtensionInFolderHook\\.[^.]+\\.folderNames$"}
#groupUniqueExtensionInFolderHook.someConfigId.folderNames = a:b, b:c

# optional config for case sensitive extensions (default true)
# {valueType: "string", regex: "^groupUniqueExtensionInFolderHook\\.[^.]+\\.caseSensitive$"}
#groupUniqueExtensionInFolderHook.someConfigId.caseSensitive = false



##################################
## Membership self read
##################################

# Allow users to see their own memberships on groups that they have VIEW privilege on
# {valueType: "boolean", defaultValue : "false"}
grouper.membership.allowSelfRead = false


##################################
## Lockout groups.  Could be used for other things, but used for policy group templates at least
## if there is no allowed group, then anyone could use it
##################################

# group name of a lockout group
# {valueType: "group", regex: "^grouper\\.lockoutGroup\\.name\\.\\d+$"}
# grouper.lockoutGroup.name.0 = ref:lockout

# allowed to use this lockout group.  If not configured, anyone could use
# {valueType: "group", regex: "^grouper\\.lockoutGroup\\.allowedToUse\\.\\d+$"}
# grouper.lockoutGroup.allowedToUse.0 = ref:lockoutCanUse

##################################
## Require groups.  Could be used for other things, but used for policy group templates at least
## if there is no allowed group, then anyone could use it
##################################

# group name of a require group
# {valueType: "group", regex: "^grouper\\.requireGroup\\.name\\.\\d+$"}
# grouper.requireGroup.name.0 = ref:active

# allowed to use this require group.  If not configured, anyone could use
# {valueType: "group", regex: "^grouper\\.lockoutGroup\\.requireGroup\\.\\d+$"}
# grouper.requireGroup.allowedToUse.0 = ref:activeCanUse

##################################
## Visualization
## Object styles for visualization modules
##################################

# semicolon-delimited regular expressions for folder names to exclude;
# for example, ^etc:.*;^$ will filter out folders etc:* and the root folder
# {valueType: "string"}
visualization.skipFolderNamePatterns =

# semicolon-delimited regular expressions for group names to exclude
# {valueType: "string"}
visualization.skipGroupNamePatterns =

# sample style properties, for illustration. It's useful to have property names
# correspond to css styles, so that they can be plugged in directly to output,
# without needing to rename them
# {valueType: "string"}
visualization.style.default.style =

# default color
# {valueType: "string"}
visualization.style.default.color =

# default bgcolor
# {valueType: "string"}
visualization.style.default.bgcolor =

# default border
# {valueType: "string"}
visualization.style.default.border =

# default font
# {valueType: "string"}
visualization.style.default.font = Courier,monospace

# default font size
# {valueType: "string"}
visualization.style.default.font-size = 12.0

# default font color
# {valueType: "string"}
visualization.style.default.font-color = black

# default shape
# {valueType: "string"}
visualization.style.default.shape =

# default shape stype
# {valueType: "string"}
visualization.style.default.shape-style =

# default edge style
# {valueType: "string"}
visualization.style.default.edge-style =

# default arrow tail
# {valueType: "string"}
visualization.style.default.arrowtail =

# default arrow head
# {valueType: "string"}
visualization.style.default.arrowhead =

# default dir
# {valueType: "string"}
visualization.style.default.dir =

# default inherit
# {valueType: "string"}
visualization.style.default.inherit =

# set up a default style inheritance (can be overridden for specific modules)
# {valueType: "string"}
visualization.style.start_group.inherit = group

# skipt group inherit
# {valueType: "string"}
visualization.style.skip_group.inherit = group

# inherit loader group
# {valueType: "string"}
visualization.style.loader_group.inherit = group

# inherit loader group
# {valueType: "string"}
visualization.style.start_loader_group.inherit = loader_group,start_group

# inherit simple loader group
# {valueType: "string"}
visualization.style.simple_loader_group.inherit = loader_group

# inherit simple loader group
# {valueType: "string"}
visualization.style.start_simple_loader_group.inherit = simple_loader_group,start_group


# inherit intersect group
# {valueType: "string"}
visualization.style.intersect_group.inherit = group

# inherit complement group
# {valueType: "string"}
visualization.style.complement_group.inherit = group

# inherit start stem
# {valueType: "string"}
visualization.style.start_stem.inherit = stem

# inherit skip stem
# {valueType: "string"}
visualization.style.skip_stem.inherit = stem

# inherit start subject
# {valueType: "string"}
visualization.style.start_subject.inherit = subject

# inherit edge loader
# {valueType: "string"}
visualization.style.edge_loader.inherit = edge

# inherit edge membership
# {valueType: "string"}
visualization.style.edge_membership.inherit = edge

# inherit edge provisioner
# {valueType: "string"}
visualization.style.edge_provisioner.inherit = edge

# inherit edge complement left
# {valueType: "string"}
visualization.style.edge_complement_left.inherit = edge

# inherit edge complement right
# {valueType: "string"}
visualization.style.edge_complement_right.inherit = edge

# inherit edge intersect left
# {valueType: "string"}
visualization.style.edge_intersect_left.inherit = edge

# inherit edge intersect right
# {valueType: "string"}
visualization.style.edge_intersect_right.inherit = edge

# inherit edge intersect
# {valueType: "string"}
visualization.style.edge_intersect.inherit = edge

# inherit group is member
# {valueType: "string"}
visualization.style.group_is_member.inherit = group

# inherit group is not member
# {valueType: "string"}
visualization.style.group_is_not_member.inherit = group

# inherit start group is member
# {valueType: "string"}
visualization.style.start_group_is_member.inherit = start_group,group_is_member

# inherit loader group is member
# {valueType: "string"}
visualization.style.loader_group_is_member.inherit = loader_group,group_is_member

# inherit start loader group is member
# {valueType: "string"}
visualization.style.start_loader_group_is_member.inherit = start_loader_group,group_is_member

# inherit simple loader group is member
# {valueType: "string"}
visualization.style.simple_loader_group_is_member.inherit = simple_loader_group,group_is_member

# inherit start simple loader group is member
# {valueType: "string"}
visualization.style.start_simple_loader_group_is_member.inherit = start_simple_loader_group,group_is_member

# inherit complement group is member
# {valueType: "string"}
visualization.style.complement_group_is_member.inherit = complement_group,group_is_member

# inherit intersect group is member
# {valueType: "string"}
visualization.style.intersect_group_is_member.inherit = intersect_group,group_is_member

# inherit start group is not member
# {valueType: "string"}
visualization.style.start_group_is_not_member.inherit = start_group,group_is_not_member

# inherit loader group is not member
# {valueType: "string"}
visualization.style.loader_group_is_not_member.inherit = loader_group,group_is_not_member

# inherit start loader group is not member
# {valueType: "string"}
visualization.style.start_loader_group_is_not_member.inherit = start_loader_group,group_is_not_member

# inherit simple loader group is not member
# {valueType: "string"}
visualization.style.simple_loader_group_is_not_member.inherit = simple_loader_group,group_is_not_member

# inherit start simple loader group is not member
# {valueType: "string"}
visualization.style.start_simple_loader_group_is_not_member.inherit = start_simple_loader_group,group_is_not_member

# inherit complement group is not member
# {valueType: "string"}
visualization.style.complement_group_is_not_member.inherit = complement_group,group_is_not_member

# inherit intersect group is not member
# {valueType: "string"}
visualization.style.intersect_group_is_not_member.inherit = intersect_group,group_is_not_member


# Link type to determine which UiV2Visualization method to invoke. Mostly relies on inheritence for subtypes
# {valueType: "string"}
visualization.style.stem.linkType = stem

# link type group
# {valueType: "string"}
visualization.style.group.linkType = group

# link type subject
# {valueType: "string"}
visualization.style.subject.linkType = subject

# link type loader group
# {valueType: "string"}
visualization.style.loader_group.linkType = group

# link type group is member
# {valueType: "string"}
visualization.style.group_is_member.linkType = group

# link type group is not member
# {valueType: "string"}
visualization.style.group_is_not_member.linkType = group

# Base type used in the ui to reduce the number of types to check; relies a lot on inheritence
# {valueType: "string"}
visualization.style.stem.baseType = stem

# group base type
# {valueType: "string"}
visualization.style.group.baseType = group

# subject base type
# {valueType: "string"}
visualization.style.subject.baseType = subject

# loader group base type
# {valueType: "string"}
visualization.style.loader_group.baseType = loader_group

# complement group base type
# {valueType: "string"}
visualization.style.complement_group.baseType = complement_group

# intersect group base type
# {valueType: "string"}
visualization.style.intersect_group.baseType = intersect_group

# Used to determine some calculated display text
# {valueType: "string"}
visualization.style.stem.displayTag = folder

# group display tag
# {valueType: "string"}
visualization.style.group.displayTag = group

# intersect group display tag
# {valueType: "string"}
visualization.style.intersect_group.displayTag = intersection group

# complement group display tag
# {valueType: "string"}
visualization.style.complement_group.displayTag = complement group

# subject display tag
# {valueType: "string"}
visualization.style.subject.displayTag = subject

# provisioner display tag
# {valueType: "string"}
visualization.style.provisioner.displayTag = provisioner

# loader group display tag
# {valueType: "string"}
visualization.style.loader_group.displayTag = loader job

# enabled style modules, comma-separated
# {valueType: "string"}
visualization.modules = text, dot

# styles for GraphViz dot format
# {valueType: "string"}
visualization.module.dot.graph.style = center=true; splines=spline; ratio=auto; ranksep = ".5"; nodesep = ".25 equally"; rankdir=LR; fontname="Courier,monospace"; bgcolor=gray91; packmode=clust;

# dot graph node style
# {valueType: "string"}
visualization.module.dot.graph.nodestyle = shape=rect; fontname="Courier,monospace"; fontsize="12.0";

# dot stem color
# {valueType: "string"}
visualization.module.dot.stem.color = powderblue

# dot stem shape
# {valueType: "string"}
visualization.module.dot.stem.shape = folder

# dot stem style
# {valueType: "string"}
visualization.module.dot.stem.style = filled

# dot start stem border
# {valueType: "string"}
visualization.module.dot.start_stem.border = 1


# start stem color e.g. deepskyblue
# {valueType: "string"}
visualization.module.dot.start_stem.color = sandybrown

# dot skip stem color
# {valueType: "string"}
visualization.module.dot.skip_stem.color = sandybrown

# dot group is member color
# {valueType: "string"}
visualization.module.dot.group_is_member.fillcolor = forestgreen

# dot group is member style
# {valueType: "string"}
visualization.module.dot.group_is_member.style = filled

# dot group is member fontcolor
# {valueType: "string"}
visualization.module.dot.group_is_member.fontcolor = white

# dot group is not member color
# {valueType: "string"}
visualization.module.dot.group_is_not_member.fillcolor = mistyrose

# dot group is not member style
# {valueType: "string"}
visualization.module.dot.group_is_not_member.style = filled

# dot group is not member fontcolor
# {valueType: "string"}
visualization.module.dot.group_is_not_member.fontcolor = black

# dot start group color
# {valueType: "string"}
visualization.module.dot.start_group.color = sandybrown

# dot start group style
# {valueType: "string"}
visualization.module.dot.start_group.style = bold

# dot start group border
# {valueType: "string"}
visualization.module.dot.start_group.border = 1

# dot intersect group color
# {valueType: "string"}
visualization.module.dot.intersect_group.color = blue

# dot intersect group style
# {valueType: "string"}
visualization.module.dot.intersect_group.style = bold

# dot start intersect group color
# {valueType: "string"}
visualization.module.dot.start_intersect_group.color = sandybrown

# dot complement group color
# {valueType: "string"}
visualization.module.dot.complement_group.color = green4

# dot complement group style
# {valueType: "string"}
visualization.module.dot.complement_group.style = bold

# dot start complement group color
# {valueType: "string"}
visualization.module.dot.start_complement_group.color = sandybrown

# dot subject color
# {valueType: "string"}
visualization.module.dot.subject.color = sandybrown

# dot subject style
# {valueType: "string"}
visualization.module.dot.subject.style = filled

# dot provisioner color
# {valueType: "string"}
visualization.module.dot.provisioner.color = red

# dot edge style
# {valueType: "string"}
visualization.module.dot.edge.style = solid

# dot edge loader color
# {valueType: "string"}
visualization.module.dot.edge_loader.color = forestgreen

# dot edge loader style
# {valueType: "string"}
visualization.module.dot.edge_loader.style = dashed

# dot edge provisioner color
# {valueType: "string"}
visualization.module.dot.edge_provisioner.color = red

# dot edge provisioner style
# {valueType: "string"}
visualization.module.dot.edge_provisioner.style = dashed

# dot edge membership style
# {valueType: "string"}
visualization.module.dot.edge_membership.style = dashed

# dot edge complement left color
# {valueType: "string"}
visualization.module.dot.edge_complement_left.color = green3

# dot edge complement left headlabel
# {valueType: "string"}
visualization.module.dot.edge_complement_left.headlabel = "(+)"

# dot edge complement left labeldistance
# {valueType: "string"}
visualization.module.dot.edge_complement_left.labeldistance = 2

# dot edge complement right color
# {valueType: "string"}
visualization.module.dot.edge_complement_right.color = red3

# dot edge complement right style
# {valueType: "string"}
visualization.module.dot.edge_complement_right.style = dashed

# dot edge complement right headlabel
# {valueType: "string"}
visualization.module.dot.edge_complement_right.headlabel = "(-)"

# dot edge complement right labeldistance
# {valueType: "string"}
visualization.module.dot.edge_complement_right.labeldistance = 2

# dot edge intersect left color
# {valueType: "string"}
visualization.module.dot.edge_intersect_left.color = blue

# dot edge intersect left headlabel
# {valueType: "string"}
visualization.module.dot.edge_intersect_left.headlabel = "(i)"

# dot edge intersect left labeldistance
# {valueType: "string"}
visualization.module.dot.edge_intersect_left.labeldistance = 2

# dot edge intersect right color
# {valueType: "string"}
visualization.module.dot.edge_intersect_right.color = blue

# dot edge intersect right headlabel
# {valueType: "string"}
visualization.module.dot.edge_intersect_right.headlabel = "(i)"

# dot edge intersect right labeldistance
# {valueType: "string"}
visualization.module.dot.edge_intersect_right.labeldistance = 2

# graph viz start stem label styles
# {valueType: "string"}
# visualization.module.graphviz.start_stem.label_styles = BGCOLOR="purple3" COLOR="blue"

# graphviz start stem label fontstyles
# {valueType: "string"}
# visualization.module.graphviz.start_stem.label_fontstyles = COLOR="white"

# graphviz loader group label fontstyles
# {valueType: "string"}
# visualization.module.graphviz.loader_group.label_fontstyles = COLOR="white"

##################################
## Configuration in the DB
##################################

# seconds between checking to see if the config files are updated in the database.  If anything edited, then refresh all.
# Note that the last edited is stored in a config property for deletes.  -1 means dont check for incrementals.
# Note if *.config.secondsBetweenUpdateChecks is greater than this number
# for this config, then it wont update until that amount has passed.
# {valueType: "integer", required: true}
grouper.config.secondsBetweenUpdateChecksToDb = 30

# seconds between full refreshes of the database config
# {valueType: "integer", required: true}
grouper.config.secondsBetweenFullRefresh = 600

# millis since that config inserted, edited or deleted.  Grouper will update this config.  Do not edit it
# Note change this with jdbc and dont audit.
# if grouper.config.secondsBetweenUpdateChecks is -1, then dont use this property
# {valueType: "integer", required: true}
grouper.config.millisSinceLastDbConfigChanged = 0


##################################
## Proxy config
##################################

# proxy requests here, e.g. https://server:1234
# {valueType: "string"}
grouper.http.proxy.url =

# socks or http
# {valueType: "string", formElement: "dropdown", optionValues: ["PROXY_HTTP", "PROXY_SOCKS5"]}
grouper.http.proxy.type =

# if this is blank then all urls are included by default.  If there is a regex here, then only include urls that match, e.g. ^abc$
# note for SFTP the url is sftp://the.host.name
# {valueType: "string"}
grouper.http.proxy.includeUrlRegexPattern =


# if this is blank then excludes are not considered by default.  If there is a regex here, then only exclude urls that match, e.g. ^abc$
# note for SFTP the url is sftp://the.host.name
# {valueType: "string"}
grouper.http.proxy.excludeUrlRegexPattern =

##################################
## SFTP sites
## the "configId" will be the identifier used in code to pull up that site, dont put special chars in it
## you shouldnt have the same host and username in two different configIds since its essentially the primary key
## e.g. if you sftp server is "depot.school.edu", the configId could be "depot"
##################################

# SFTP needs to use some files to connect.  Keep this in a dir that only the tomcat user can read
# otherwise it will use the tmp dir configured in grouper.properties.
# {valueType: "string"}
grouperSftpBaseDirName =

# default proxy host for all sftp external systems
# {valueType: "string"}
grouperSftp.proxyHost =

# default proxy port for all sftp external systems
# {valueType: "integer"}
grouperSftp.proxyPort =

# default proxy type for all sftp external systems: PROXY_HTTP, PROXY_SOCKS5, PROXY_STREAM
# {valueType: "string", formElement: "dropdown", optionValues: ["PROXY_HTTP", "PROXY_SOCKS5", "PROXY_STREAM"]}
grouperSftp.proxyType =

# host: e.g. some.server.com
# {valueType: "string", regex: "^grouperSftp\\.site\\.[a-zA-Z0-9._-]+\\.host$", required: true}
# grouperSftp.site.configId.host =

# user: e.g. someuser
# {valueType: "string", regex: "^grouperSftp\\.site\\.[a-zA-Z0-9._-]+\\.user$", required: true}
# grouperSftp.site.configId.user =

# you can encrypt the private key to connect with.  if its more than 4k encrypted, then take it in chunks and they will be concatenated
# and use _0, _1, _2, etc.  Note, replace newlines with $newline$ so it fits in a textfield
# {valueType: "password", sensitive: true, regex: "^grouperSftp\\.site\\.[a-zA-Z0-9._-]+\\.secret\\.privateKey_[0-9]$"}
# grouperSftp.site.configId.secret.privateKey_0 =

# private key passphrase
# {valueType: "password", sensitive: true, regex: "^grouperSftp\\.site\\.[a-zA-Z0-9._-]+\\.secret\\.privateKeyPassphrase$"}
# grouperSftp.site.configId.secret.privateKeyPassphrase =

# password if not using private key
# {valueType: "password", sensitive: true, regex: "^grouperSftp\\.site\\.[a-zA-Z0-9._-]+\\.password$"}
# grouperSftp.site.configId.password =

# connect to the host, and copy the known_hosts entry for the host to connect to
# e.g. host.whatever ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEA3B00cx5W9KPSjzik3E
# {valueType: "string", regex: "^grouperSftp\\.site\\.[a-zA-Z0-9._-]+\\.knownHostsEntry$"}
# grouperSftp.site.configId.knownHostsEntry =

# if any temporary files (e.g. private key and known hosts) should be deleted after session, default true
# {valueType: "boolean", defaultValue: "true", regex: "^grouperSftp\\.site\\.[a-zA-Z0-9._-]+\\.deleteTempFilesAfterSession$"}
# grouperSftp.site.configId.deleteTempFilesAfterSession =

# timeout in millis defaults to 10000
# {valueType: "integer", regex: "^grouperSftp\\.site\\.[a-zA-Z0-9._-]+\\.timeoutMillis$"}
# grouperSftp.site.configId.timeoutMillis =

# if this sftp connector is enabled
# {valueType: "boolean", regex: "^grouperSftp\\.site\\.[a-zA-Z0-9._-]+\\.enabled$", defaultValue: "true"}
# grouperSftp.site.configId.enabled =

# Proxy host for this sftp external system, or default to the global default: grouper.properties: grouperSftp.proxyHost
# {valueType: "string", regex: "^grouperSftp\\.site\\.[a-zA-Z0-9._-]+\\.proxyHost$"}
# grouperSftp.site.configId.proxyHost =

# Proxy port for this sftp external system, or default to the global default: grouper.properties: grouperSftp.proxyPort
# {valueType: "integer", regex: "^grouperSftp\\.site\\.[a-zA-Z0-9._-]+\\.proxyPort$"}
# grouperSftp.site.configId.proxyPort =

# Proxy type for this sftp external system: PROXY_HTTP, PROXY_SOCKS5, PROXY_STREAM, or default to the global default: grouper.properties: grouperSftp.proxyType
# {valueType: "string", regex: "^grouperSftp\\.site\\.[a-zA-Z0-9._-]+\\.proxyType$", formElement: "dropdown", optionValues: ["PROXY_HTTP", "PROXY_SOCKS5", "PROXY_STREAM"]}
# grouperSftp.site.configId.proxyType =

##################################
## authentication hash type
##################################

# hash for DB authn
# {valueType: "string", required: true}
grouper.authentication.encryptionType = SHA-256

# if we should cache UI authns
# {valueType: "boolean", required : true}
grouper.authentication.UI.cache = false

# if we should cache WS authns
# {valueType: "boolean", required : true}
grouper.authentication.WS.cache = false

# cache timeout for UI authns
# {valueType: "integer", required: true}
grouper.authentication.UI.cacheTimeMinutes = 2

# cache timeout for WS authns
# {valueType: "integer", required: true}
grouper.authentication.WS.cacheTimeMinutes = 2

# when splitting basic auth header (which doesnt handle colons well), split on first or last colon
# first colon means usernames dont have colons, but passwords do.
# splitting on last colon means usernames have colons (e.g. local entities), but passwords dont
# note you can also escape colons
# {valueType: "boolean", defaultValue : "false"}
grouper.authentication.splitBasicAuthOnFirstColon = false


# You can escape colons in usernames and passwords, and they will be unescaped.  escape with :
# set this to false to not unescape colons
# {valueType: "boolean", defaultValue : "false"}
grouper.authentication.basicAuthUnescapeColon = true

##################################
## ws self-service jwt
##################################

# if public private key should be enabled
# {valueType: "boolean", defaultValue: "true"}
grouper.selfService.jwt.enable =

# if you fill in a group name here, then only members of this group can manage jwt private keys on the ui
# {valueType: "string"}
grouper.selfService.jwt.groupNameAllowedToManage =

# maximum number of seconds for which a jwt can stay valid
# {valueType: "integer"}
grouper.selfService.jwt.maxValidTimeInSeconds = 600


############################################
## dev environment allow missing servlets
############################################

# {valueType: "string", required: false}
grouper.dev.env.allowMissingServlets = false

############################################
## O365 connector
## See documentation at http://graph.microsoft.io/en-us/docs
############################################

# tenant ID
# {valueType: "string", required: true, regex: "^grouper\\.o365Connector\\.([^.]+)\\.tenantId$"}
# grouper.o365Connector.myO365.tenantId =

# client ID
# {valueType: "string", required: true, regex: "^grouper\\.o365Connector\\.([^.]+)\\.clientId$"}
# grouper.o365Connector.myO365.clientId =

# client secret
# {valueType: "password", required: true, regex: "^grouper\\.o365Connector\\.([^.]+)\\.clientSecret$"}
# grouper.o365Connector.myO365.clientSecret =

# ID attribute
# {valueType: "string", required: true, regex: "^grouper\\.o365Connector\\.([^.]+)\\.idAttribute$"}
# grouper.o365Connector.myO365.idAttribute =

# group JEXL
# {valueType: "string", required: true, regex: "^grouper\\.o365Connector\\.([^.]+)\\.groupJexl$"}
# grouper.o365Connector.myO365.groupJexl =

# if this O365 connector is enabled
# {valueType: "boolean", regex: "^grouper\\.o365Connector\\.([^.]+)\\.enabled$", defaultValue: "true"}
# grouper.o365Connector.myO365.enabled =


############################################
## Google connector
## A Google Apps admin must follow the steps at Perform Google Apps Domain-Wide Delegation of Authority to
## create a service application/account that is used by the provisioner to connect to Google. The steps can
## be followed as written with one exception. The account will need to be given these grants:
## https://www.googleapis.com/auth/admin.directory.user, https://www.googleapis.com/auth/admin.directory.group,
## https://www.googleapis.com/auth/apps.groups.settings.
############################################

# The Google managed domain name. (e.g. example.org)
# {valueType: "string", required: true, regex: "^grouper\\.googleConnector\\.([^.]+)\\.domain$"}
# grouper.googleConnector.myGoogle.domain =

# The Google managed group domain name. (e.g. example.org)
# {valueType: "string", regex: "^grouper\\.googleConnector\\.([^.]+)\\.groupDomain$"}
# grouper.googleConnector.myGoogle.groupDomain =

# The service account email address created by Google.
# {valueType: "string", required: true, regex: "^grouper\\.googleConnector\\.([^.]+)\\.serviceAccountEmail$"}
# grouper.googleConnector.myGoogle.serviceAccountEmail =

# The path of the PKCS12 file created and downloaded from Google. The OS account running Grouper
# needs to have read permissions to this file. Access to this file should be limited.
# {valueType: "string", regex: "^grouper\\.googleConnector\\.([^.]+)\\.serviceAccountPKCS12FilePath$"}
# grouper.googleConnector.myGoogle.serviceAccountPKCS12FilePath =

# If not reading from a file, this is the private key. You can get it by running "openssl pkcs12 -info -in pathToYourP12File -nodes"
# {valueType: "password", formElement: "textarea",  regex: "^grouper\\.googleConnector\\.([^.]+)\\.serviceAccountPrivateKeyPEM$"}
# grouper.googleConnector.myGoogle.serviceAccountPrivateKeyPEM =

# This is the account that all actions will be made by. It needs to exists and will be the creator and modifier
# account associated with the Google auditing logs.
# {valueType: "string", required: true, regex: "^grouper\\.googleConnector\\.([^.]+)\\.serviceImpersonationUser$"}
# grouper.googleConnector.myGoogle.serviceImpersonationUser =

# Google app token url
# {valueType: "string", defaultValue: "https://oauth2.googleapis.com/token", regex: "^grouper\\.googleConnector\\.([^.]+)\\.tokenUrl$"}
# grouper.googleConnector.myGoogle.tokenUrl =

# Base url for google directory APIs
# {valueType: "string", defaultValue: "https://admin.googleapis.com/admin/directory/v1", regex: "^grouper\\.googleConnector\\.([^.]+)\\.directoryApiBaseUrl$"}
# grouper.googleConnector.myGoogle.directoryApiBaseUrl =

# URL for google group settings api
# {valueType: "string", defaultValue: "https://www.googleapis.com/groups/v1/groups", regex: "^grouper\\.googleConnector\\.([^.]+)\\.groupSettingsApiBaseUrl$"}
# grouper.googleConnector.myGoogle.groupSettingsApiBaseUrl =

# page size for groups
# {valueType: "integer", defaultValue: "200", regex: "^grouper\\.googleConnector\\.([^.]+)\\.pageSizeGroup$"}
# grouper.googleConnector.myGoogle.pageSizeGroup =

# page size for users
# {valueType: "integer", defaultValue: "500", regex: "^grouper\\.googleConnector\\.([^.]+)\\.pageSizeUser$"}
# grouper.googleConnector.myGoogle.pageSizeUser =

# page size for memberships
# {valueType: "integer", defaultValue: "200", regex: "^grouper\\.googleConnector\\.([^.]+)\\.pageSizeMembership$"}
# grouper.googleConnector.myGoogle.pageSizeMembership =

# proxy requests here, e.g. https://server:1234
# {valueType: "string", regex: "^grouper\\.googleConnector\\.([^.]+)\\.proxyUrl$"}
# grouper.googleConnector.myGoogle.proxyUrl =

# socks or http
# {valueType: "string", regex: "^grouper\\.googleConnector\\.([^.]+)\\.proxyType$", formElement: "dropdown", optionValues: ["PROXY_HTTP", "PROXY_SOCKS5"]}
# grouper.googleConnector.myGoogle.proxyType =

# if this google connector is enabled
# {valueType: "boolean", regex: "^grouper\\.googleConnector\\.([^.]+)\\.enabled$", defaultValue: "true"}
# grouper.googleConnector.myGoogle.enabled =

############################################
## ActiveMQ
############################################

# host address of activemq queue. eg: example.org
# {valueType: "string", required: true, regex: "^grouper\\.activeMqConnector\\.([^.]+)\\.host$"}
# grouper.activeMqConnector.myConnector.host =

# port of activemq queue, default is 5672
# {valueType: "integer", required: true, regex: "^grouper\\.activeMqConnector\\.([^.]+)\\.port$"}
# grouper.activeMqConnector.myConnector.port =

# username of activemq queue
# {valueType: "string", required: true, regex: "^grouper\\.activeMqConnector\\.([^.]+)\\.username$"}
# grouper.activeMqConnector.myConnector.username =

# password of activemq queue
# {valueType: "password", required: true, regex: "^grouper\\.activeMqConnector\\.([^.]+)\\.password$"}
# grouper.activeMqConnector.myConnector.password =

# if this activemq connector is enabled
# {valueType: "boolean", regex: "^grouper\\.activeMqConnector\\.([^.]+)\\.enabled$", defaultValue: "true"}
# grouper.activeMqConnector.myConnector.enabled =

############################################
## RabbitMQ
############################################

# host address of rabbitmq queue. eg: example.org
# {valueType: "string", required: true, regex: "^grouper\\.rabbitMqConnector\\.([^.]+)\\.host$"}
# grouper.rabbitMqConnector.myConnector.host =

# virtual host address of rabbitmq queue. eg: example.org
# {valueType: "string", required: true, regex: "^grouper\\.rabbitMqConnector\\.([^.]+)\\.virtualhost$"}
# grouper.rabbitMqConnector.myConnector.virtualhost =

# port of rabbitmq queue
# {valueType: "integer", required: true, regex: "^grouper\\.rabbitMqConnector\\.([^.]+)\\.port$"}
# grouper.rabbitMqConnector.myConnector.port =

# username
# {valueType: "string", required: true, regex: "^grouper\\.rabbitMqConnector\\.([^.]+)\\.username$"}
# grouper.rabbitMqConnector.myConnector.username =

# password
# {valueType: "password", required: true, regex: "^grouper\\.rabbitMqConnector\\.([^.]+)\\.password$"}
# grouper.rabbitMqConnector.myConnector.password =

# set the following three properties if you want to use TLS connection to rabbitmq. All three need to be populated.
# TLS Version. eg: TLSv1.1
# {valueType: "string", regex: "^grouper\\.rabbitMqConnector\\.([^.]+)\\.tlsVersion$"}
# grouper.rabbitMqConnector.myConnector.tlsVersion =

# path to trust store file
# {valueType: "string", regex: "^grouper\\.rabbitMqConnector\\.([^.]+)\\.pathToTrustStore$"}
# grouper.rabbitMqConnector.myConnector.pathToTrustStore =

# trust passphrase
# {valueType: "password", regex: "^grouper\\.rabbitMqConnector\\.([^.]+)\\.trustPassphrase$"}
# grouper.rabbitMqConnector.myConnector.trustPassphrase =

# if this rabbitmq connector is enabled
# {valueType: "boolean", regex: "^grouper\\.rabbitMqConnector\\.([^.]+)\\.enabled$", defaultValue: "true"}
# grouper.rabbitMqConnector.myConnector.enabled =

############################################
## AWS SQS
############################################

# access key
# {valueType: "string", required: true, regex: "^grouper\\.sqsConnector\\.([^.]+)\\.accessKey$"}
# grouper.sqsConnector.myConnector.accessKey =

# secret key
# {valueType: "password", required: true, regex: "^grouper\\.sqsConnector\\.([^.]+)\\.secretKey$"}
# grouper.sqsConnector.myConnector.secretKey =

# if this SQS connector is enabled
# {valueType: "boolean", regex: "^grouper\\.sqsConnector\\.([^.]+)\\.enabled$", defaultValue: "true"}
# grouper.sqsConnector.myConnector.enabled =

############################################
## Duo connector
############################################

# endpoint domain name
# {valueType: "string", required: true, regex: "^grouper\\.duoConnector\\.([^.]+)\\.adminDomainName$"}
# grouper.duoConnector.myConnector.adminDomainName =

# integration key
# {valueType: "string", required: true, regex: "^grouper\\.duoConnector\\.([^.]+)\\.adminIntegrationKey$"}
# grouper.duoConnector.myConnector.adminIntegrationKey =

# secret key
# {valueType: "password", required: true, regex: "^grouper\\.duoConnector\\.([^.]+)\\.adminSecretKey$"}
# grouper.duoConnector.myConnector.adminSecretKey =

# Use SSL
# {valueType: "boolean", defaultValue: "true", regex: "^grouper\\.duoConnector\\.([^.]+)\\.useSsl$"}
# grouper.duoConnector.myConnector.useSsl =

# proxy requests here, e.g. https://server:1234
# {valueType: "string", regex: "^grouper\\.duoConnector\\.([^.]+)\\.proxyUrl$"}
# grouper.duoConnector.myConnector.proxyUrl =

# socks or http
# {valueType: "string", regex: "^grouper\\.duoConnector\\.([^.]+)\\.proxyType$", formElement: "dropdown", optionValues: ["PROXY_HTTP", "PROXY_SOCKS5"]}
# grouper.duoConnector.myConnector.proxyType =

# if this duo connector is enabled
# {valueType: "boolean", regex: "^grouper\\.duoConnector\\.([^.]+)\\.enabled$", defaultValue: "true"}
# grouper.duoConnector.myConnector.enabled =

############################################
## Duo mock
############################################
# endpoint domain name
# {valueType: "string"}
# grouperTest.duo.mock.configId =

############################################
## Remedy connector
############################################

# url
# {valueType: "string", required: true, regex: "^grouper\\.remedyConnector\\.([^.]+)\\.url$"}
# grouper.remedyConnector.myConnector.url =

# authentication url
# {valueType: "string", required: true, regex: "^grouper\\.remedyConnector\\.([^.]+)\\.tokenUrl$"}
# grouper.remedyConnector.myConnector.tokenUrl =

# username
# {valueType: "string", required: true, regex: "^grouper\\.remedyConnector\\.([^.]+)\\.username$"}
# grouper.remedyConnector.myConnector.username =

# password
# {valueType: "password", required: true, regex: "^grouper\\.remedyConnector\\.([^.]+)\\.password$"}
# grouper.remedyConnector.myConnector.password =

# if this remedy connector is enabled
# {valueType: "boolean", regex: "^grouper\\.remedyConnector\\.([^.]+)\\.enabled$", defaultValue: "true"}
# grouper.remedyConnector.myConnector.enabled =

############################################
## Remedy digital marketplace connector
############################################

# url
# {valueType: "string", required: true, regex: "^grouper\\.remedyDigitalMarketplaceConnector\\.([^.]+)\\.url$"}
# grouper.remedyDigitalMarketplaceConnector.myConnector.url =

# authentication url
# {valueType: "string", required: true, regex: "^grouper\\.remedyDigitalMarketplaceConnector\\.([^.]+)\\.tokenUrl$"}
# grouper.remedyDigitalMarketplaceConnector.myConnector.tokenUrl =

# username
# {valueType: "string", required: true, regex: "^grouper\\.remedyDigitalMarketplaceConnector\\.([^.]+)\\.username$"}
# grouper.remedyDigitalMarketplaceConnector.myConnector.username =

# password
# {valueType: "password", required: true, regex: "^grouper\\.remedyDigitalMarketplaceConnector\\.([^.]+)\\.password$"}
# grouper.remedyDigitalMarketplaceConnector.myConnector.password =

# X-Requested-By
# {valueType: "string", required: true, regex: "^grouper\\.remedyDigitalMarketplaceConnector\\.([^.]+)\\.xRequestedByHeader$"}
# grouper.remedyDigitalMarketplaceConnector.myConnector.xRequestedByHeader =


############################################
## Recent memberships
############################################

# if the recent-membership loader job should be created and scheduled nightly at 3:41am.  It runs real time too so it shouldnt
# need to run more frequently than daily
# {valueType: "boolean", defaultValue: "true"}
grouper.recentMemberships.loaderJob.enable = true


# if this digital marketplace connector is enabled
# {valueType: "boolean", regex: "^grouper\\.remedyDigitalMarketplaceConnector\\.([^.]+)\\.enabled$", defaultValue: "true"}
# grouper.remedyDigitalMarketplaceConnector.myConnector.enabled =

############################################
## Grouper cache database
############################################

# If we should run a thread to check the database to see if a cache changed in another JVM
# {valueType: "boolean", defaultValue: "true"}
grouper.cache.database.use = true

# How much time to sleep between checks in seconds
# {valueType: "integer", defaultValue: "5"}
grouper.cache.database.checkIncrementalAfterSeconds = 5

# How much time in between full checks (select all from cache instance table)
# {valueType: "integer", defaultValue: "3600"}
grouper.cache.database.checkFullAfterSeconds = 3600


############################################
## External systems
############################################

# How much time to sleep between checks in seconds
# {valueType: "integer", defaultValue: "60"}
grouper.externalSystem.connectionRefresher.checkIntervalInSeconds = 60

############################################
## Mock services
############################################

# If requests and responses should be logged
# {valueType: "boolean", defaultValue: "false"}
grouper.mock.services.logRequestsResponses = false


############################################
## Custom UI
############################################

# enabled or disabled
# {valueType: "boolean", defaultValue: "true", order: 1000 }
# grouperCustomUI.testCustomUI.enabled =

# group uuid
# {valueType: "string", required: true, order: 2000 }
# grouperCustomUI.testCustomUI.groupUUIDOrName =

# use externalized text for labels and descriptions?
# {valueType: "boolean", defaultValue: "false", order: 3000 }
# grouperCustomUI.testCustomUI.externalizedText =

# If in this group then can see user environment.  This is for developers of the custom ui
# {valueType: "string", order: 3100 }
# grouperCustomUI.testCustomUI.groupCanSeeUserEnvironment =

# If in this group then can see screen state.  This is for people who support the application
# {valueType: "string", order: 3110 }
# grouperCustomUI.testCustomUI.groupCanSeeScreenState =

# If in this group then can assign variables in the URL.  This is for people verifying that the custom UI is working correctly
# {valueType: "string", order: 3120 }
# grouperCustomUI.testCustomUI.groupCanAssignVariables =

# If in this group then can pull other users up to check their UI or add or remove them
# {valueType: "string", order: 3130 }
# grouperCustomUI.testCustomUI.groupOfManagers =


# number of queries
# {valueType: "string", defaultValue: "0", subSection: "cuQuery", order: 4000, formElement: "dropdown", optionValues: ["1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23", "24", "25", "26", "27", "28", "29", "30", "31", "32", "33", "34", "35", "36", "37", "38", "39", "40", "41", "42", "43", "44", "45", "46", "47", "48", "49", "50", "51", "52", "53", "54", "55", "56", "57", "58", "59", "60", "61", "62", "63", "64", "65", "66", "67", "68", "69", "70", "71", "72", "73", "74", "75", "76", "77", "78", "79", "80", "81", "82", "83", "84", "85", "86", "87", "88", "89", "90", "91", "92", "93", "94", "95", "96", "97", "98", "99", "100"] }
# grouperCustomUI.testCustomUI.numberOfQueries =

# user query type
# {valueType: "string", order: 7000, showEl: "${numberOfQueries > $i$}", repeatGroup: "cuQuery", repeatCount: 100, formElement: "dropdown", optionValues: ["azure", "expressionLanguage", "grouper", "ldap", "sql", "url", "zoom"] }
# grouperCustomUI.testCustomUI.cuQuery.$i$.userQueryType =


# uuid of attribute def to look up
# {valueType: "string", order: 8000, showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'expressionLanguage' || cuQuery.$i$.userQueryType == 'grouper' || cuQuery.$i$.userQueryType == 'sql') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.attributeDefId =

# azure group id
# {valueType: "string", order: 9000, showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'azure') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.azureGroupId =

# bind variable 0
# {valueType: "string", order: 10000, showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'sql') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.bindVar0 =

# bind variable 0 type
# {valueType: "string", order: 11000, showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'sql') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.bindVar0Type =

# bind variable 1
# {valueType: "string", order: 12000, showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'sql') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.bindVar1 =

# bind variable 1 type
# {valueType: "string", order: 13000, showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'sql') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.bindVar1Type =

# bind variable 2
# {valueType: "string", order: 14000, showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'sql') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.bindVar2 =

# bind variable 2 type
# {valueType: "string", order: 15000, showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'sql') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.bindVar2Type =

# config id
# {valueType: "string", order: 16000, requiredEl: "${cuQuery.$i$.userQueryType == 'azure' || cuQuery.$i$.userQueryType == 'ldap' || cuQuery.$i$.userQueryType == 'zoom'}", showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'azure' || cuQuery.$i$.userQueryType == 'ldap' || cuQuery.$i$.userQueryType == 'zoom' || cuQuery.$i$.userQueryType == 'sql') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.configId =

# enabled
# {valueType: "boolean", order: 17000, defaultValue: "true", showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'azure' || cuQuery.$i$.userQueryType == 'ldap' || cuQuery.$i$.userQueryType == 'zoom' || cuQuery.$i$.userQueryType == 'sql' || cuQuery.$i$.userQueryType == 'grouper' || cuQuery.$i$.userQueryType == 'expressionLanguage' || cuQuery.$i$.userQueryType == 'url') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.enabled =

# error label
# {valueType: "string", order: 18000, requiredEl: "${cuQuery.$i$.userQueryType == 'azure' || cuQuery.$i$.userQueryType == 'zoom'}", showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'azure' || cuQuery.$i$.userQueryType == 'zoom' || cuQuery.$i$.userQueryType == 'ldap' || cuQuery.$i$.userQueryType == 'sql' || cuQuery.$i$.userQueryType == 'grouper' || cuQuery.$i$.userQueryType == 'expressionLanguage' || cuQuery.$i$.userQueryType == 'url') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.errorLabel =

# field names
# {valueType: "string", order: 19000, showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'grouper') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.fieldNames =

# for logged in user
# {valueType: "boolean", order: 20000, defaultValue: "false", showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'azure' || cuQuery.$i$.userQueryType == 'ldap' || cuQuery.$i$.userQueryType == 'sql' || cuQuery.$i$.userQueryType == 'grouper' || cuQuery.$i$.userQueryType == 'expressionLanguage') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.forLoggedInUser =

# group id
# {valueType: "string", order: 21000, showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'azure' || cuQuery.$i$.userQueryType == 'ldap' || cuQuery.$i$.userQueryType == 'sql' || cuQuery.$i$.userQueryType == 'grouper' || cuQuery.$i$.userQueryType == 'expressionLanguage') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.groupId =

# group name
# {valueType: "string", order: 22000, showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'azure' || cuQuery.$i$.userQueryType == 'ldap' || cuQuery.$i$.userQueryType == 'sql' || cuQuery.$i$.userQueryType == 'grouper' || cuQuery.$i$.userQueryType == 'expressionLanguage') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.groupName =

# label
# {valueType: "string", order: 23000, required: true, showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'azure' || cuQuery.$i$.userQueryType == 'ldap' || cuQuery.$i$.userQueryType == 'zoom' || cuQuery.$i$.userQueryType == 'sql' || cuQuery.$i$.userQueryType == 'grouper' || cuQuery.$i$.userQueryType == 'expressionLanguage' || cuQuery.$i$.userQueryType == 'url') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.label =

# label externalized text key
# {valueType: "string", order: 23500, required: true, showEl: "${numberOfQueries > $i$ && externalizedText && (cuQuery.$i$.userQueryType == 'azure' || cuQuery.$i$.userQueryType == 'ldap' || cuQuery.$i$.userQueryType == 'zoom' || cuQuery.$i$.userQueryType == 'sql' || cuQuery.$i$.userQueryType == 'grouper' || cuQuery.$i$.userQueryType == 'expressionLanguage')}", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.labelExternalizedTextKey =

# ldap attribute to retrieve
# {valueType: "string", order: 24000, showEl: "${numberOfQueries > $i$ && cuQuery.$i$.userQueryType == 'ldap'}", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.ldapAttributeToRetrieve =

# ldap filter
# {valueType: "string", order: 25000, showEl: "${numberOfQueries > $i$ && cuQuery.$i$.userQueryType == 'ldap'}", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.ldapFilter =

# ldap search dn
# {valueType: "string", order: 26000, showEl: "${numberOfQueries > $i$ && cuQuery.$i$.userQueryType == 'ldap'}", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.ldapSearchDn =

# name of attribute def
# {valueType: "string", order: 27000, showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'sql' || cuQuery.$i$.userQueryType == 'grouper' || cuQuery.$i$.userQueryType == 'expressionLanguage') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.nameOfAttributeDef =

# order
# {valueType: "integer", order: 28000, showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'azure' || cuQuery.$i$.userQueryType == 'ldap' || cuQuery.$i$.userQueryType == 'zoom' || cuQuery.$i$.userQueryType == 'sql' || cuQuery.$i$.userQueryType == 'grouper' || cuQuery.$i$.userQueryType == 'expressionLanguage' || cuQuery.$i$.userQueryType == 'url') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.order =

# query
# {valueType: "string", order: 29000, showEl: "${numberOfQueries > $i$ && cuQuery.$i$.userQueryType == 'sql'}", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.query =

# script
# {valueType: "string", order: 30000, requiredEl: "${cuQuery.$i$.userQueryType == 'expressionLanguage'}",  showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'azure' || cuQuery.$i$.userQueryType == 'zoom' || cuQuery.$i$.userQueryType == 'expressionLanguage') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.script =

# stem id
# {valueType: "string", order: 31000, showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'expressionLanguage' || cuQuery.$i$.userQueryType == 'grouper' || cuQuery.$i$.userQueryType == 'sql') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.stemId =

# stem name
# {valueType: "string", order: 32000, showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'expressionLanguage' || cuQuery.$i$.userQueryType == 'grouper' || cuQuery.$i$.userQueryType == 'sql') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.stemName =

# variable to assign
# {valueType: "string", order: 33000, required: true, showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'expressionLanguage' || cuQuery.$i$.userQueryType == 'grouper' || cuQuery.$i$.userQueryType == 'ldap' || cuQuery.$i$.userQueryType == 'sql' || cuQuery.$i$.userQueryType == 'azure' || cuQuery.$i$.userQueryType == 'zoom' || cuQuery.$i$.userQueryType == 'url') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.variableToAssign =

# variable to assign on error
# {valueType: "string", order: 34000, requiredEl: "${cuQuery.$i$.userQueryType == 'azure' || cuQuery.$i$.userQueryType == 'zoom'}", showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'azure' || cuQuery.$i$.userQueryType == 'zoom' || cuQuery.$i$.userQueryType == 'expressionLanguage' || cuQuery.$i$.userQueryType == 'grouper' || cuQuery.$i$.userQueryType == 'ldap' || cuQuery.$i$.userQueryType == 'sql' || cuQuery.$i$.userQueryType == 'url') }", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.variableToAssignOnError =

# variable type
# {valueType: "string", order: 35000, defaultValue: "string", showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'expressionLanguage' || cuQuery.$i$.userQueryType == 'grouper' || cuQuery.$i$.userQueryType == 'ldap' || cuQuery.$i$.userQueryType == 'sql' || cuQuery.$i$.userQueryType == 'azure' || cuQuery.$i$.userQueryType == 'zoom'  || cuQuery.$i$.userQueryType == 'url') }", repeatGroup: "cuQuery", formElement: "dropdown", optionValues: ["boolean", "integer", "string"], repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.variableType =

# allow assign from url
# {valueType: "boolean", order: 35100, defaultValue: "false", showEl: "${numberOfQueries > $i$ && (cuQuery.$i$.userQueryType == 'expressionLanguage' || cuQuery.$i$.userQueryType == 'grouper' || cuQuery.$i$.userQueryType == 'ldap' || cuQuery.$i$.userQueryType == 'sql' || cuQuery.$i$.userQueryType == 'azure' || cuQuery.$i$.userQueryType == 'zoom'  || cuQuery.$i$.userQueryType == 'url')}", repeatGroup: "cuQuery", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuQuery.$i$.allowAssignFromUrl =


# number of text configs
# {valueType: "string", defaultValue: "0", subSection: "cuTextConfigs", order: 36000, formElement: "dropdown", optionValues: ["1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23", "24", "25", "26", "27", "28", "29", "30", "31", "32", "33", "34", "35", "36", "37", "38", "39", "40", "41", "42", "43", "44", "45", "46", "47", "48", "49", "50", "51", "52", "53", "54", "55", "56", "57", "58", "59", "60", "61", "62", "63", "64", "65", "66", "67", "68", "69", "70", "71", "72", "73", "74", "75", "76", "77", "78", "79", "80", "81", "82", "83", "84", "85", "86", "87", "88", "89", "90", "91", "92", "93", "94", "95", "96", "97", "98", "99", "100"] }
# grouperCustomUI.testCustomUI.numberOfTextConfigs =

# custom ui text type
# {valueType: "string", order: 37000, required: true, showEl: "${numberOfTextConfigs > $i$ }", repeatGroup: "cuTextConfig", repeatCount: 100, formElement: "dropdown", optionValues: ["canAssignVariables", "canSeeScreenState", "canSeeUserEnvironment", "emailBccGroupName", "emailBody", "emailSubject", "emailToUser", "enrollButtonShow", "enrollButtonText", "enrollmentLabel", "header", "helpLink", "instructions1", "logo", "managerInstructions", "unenrollButtonShow", "unenrollButtonText", "manageMembership", "redirectToUrl", "gshScript"]}
# grouperCustomUI.testCustomUI.cuTextConfig.$i$.textType =

# enabled
# {valueType: "boolean", order: 37500, showEl: "${numberOfTextConfigs > $i$ }", repeatGroup: "cuTextConfig", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuTextConfig.$i$.enabled =

# end if matches
# {valueType: "boolean", order: 38000, defaultValue: "false", showEl: "${numberOfTextConfigs > $i$ }", repeatGroup: "cuTextConfig", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuTextConfig.$i$.endIfMatches =

# index
# {valueType: "integer", order: 39000, required: true, showEl: "${numberOfTextConfigs > $i$ }", repeatGroup: "cuTextConfig", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuTextConfig.$i$.index =

# default text
# {valueType: "boolean", order: 40000, defaultValue: "false", showEl: "${numberOfTextConfigs > $i$ }", repeatGroup: "cuTextConfig", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuTextConfig.$i$.defaultText =

# text
# {valueType: "string", order: 41000, required: true, showEl: "${numberOfTextConfigs > $i$ && !(cuTextConfig.$i$.textType == 'canAssignVariables' || cuTextConfig.$i$.textType == 'canSeeScreenState' || cuTextConfig.$i$.textType == 'canSeeUserEnvironment' || cuTextConfig.$i$.textType == 'emailToUser' || cuTextConfig.$i$.textType == 'enrollButtonShow' || cuTextConfig.$i$.textType == 'unenrollButtonShow' || cuTextConfig.$i$.textType == 'manageMembership' ) }", formElement: "textarea", repeatGroup: "cuTextConfig", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuTextConfig.$i$.text =

# text is script?
# {valueType: "boolean", order: 41500, defaultValue: "false", showEl: "${numberOfTextConfigs > $i$ && (cuTextConfig.$i$.textType == 'canAssignVariables' || cuTextConfig.$i$.textType == 'canSeeScreenState' || cuTextConfig.$i$.textType == 'canSeeUserEnvironment' || cuTextConfig.$i$.textType == 'emailToUser' || cuTextConfig.$i$.textType == 'enrollButtonShow' || cuTextConfig.$i$.textType == 'unenrollButtonShow' || cuTextConfig.$i$.textType == 'manageMembership' ) }", repeatGroup: "cuTextConfig", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuTextConfig.$i$.textIsScript =


# text boolean scalar
# {valueType: "boolean", order: 41600, required: true, showEl: "${numberOfTextConfigs > $i$ && !cuTextConfig.$i$.textIsScript && (cuTextConfig.$i$.textType == 'canAssignVariables' || cuTextConfig.$i$.textType == 'canSeeScreenState' || cuTextConfig.$i$.textType == 'canSeeUserEnvironment' || cuTextConfig.$i$.textType == 'emailToUser' || cuTextConfig.$i$.textType == 'enrollButtonShow' || cuTextConfig.$i$.textType == 'unenrollButtonShow' || cuTextConfig.$i$.textType == 'manageMembership' ) }", repeatGroup: "cuTextConfig", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuTextConfig.$i$.textBoolean =

# text boolean script
# {valueType: "string", order: 41700, required: true, showEl: "${numberOfTextConfigs > $i$ && cuTextConfig.$i$.textIsScript && (cuTextConfig.$i$.textType == 'canAssignVariables' || cuTextConfig.$i$.textType == 'canSeeScreenState' || cuTextConfig.$i$.textType == 'canSeeUserEnvironment' || cuTextConfig.$i$.textType == 'emailToUser' || cuTextConfig.$i$.textType == 'enrollButtonShow' || cuTextConfig.$i$.textType == 'unenrollButtonShow' || cuTextConfig.$i$.textType == 'manageMembership' ) }", repeatGroup: "cuTextConfig", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuTextConfig.$i$.textBooleanScript =

# script
# {valueType: "string", order: 42000, showEl: "${numberOfTextConfigs > $i$ }", repeatGroup: "cuTextConfig", repeatCount: 100}
# grouperCustomUI.testCustomUI.cuTextConfig.$i$.script =


############################################
## Gsh templates configuration
############################################

# Template type
# {valueType: "string", required: true, order: 500, formElement: "dropdown", optionValues: ["gsh", "abac"] }
# grouperGshTemplate.testGshTemplate.templateType =

# enabled or disabled
# {valueType: "boolean", defaultValue: "true", order: 1000 }
# grouperGshTemplate.testGshTemplate.enabled =

# GSH template version.  V1 is the original legacy version.  V2 needs to implement edu.internet2.middleware.grouper.app.gsh.template.GshTemplateV2 and assign to: 
# gsh_builtin_gshTemplateRuntime.assignGshTemplateV2(gshTemplateV2);
# {valueType: "string", defaultValue: "V1", order: 3000, formElement: "dropdown", optionValues: ["V1", "V2"] }
# grouperGshTemplate.testGshTemplate.templateVersion =

# show on folders
# {valueType: "boolean", defaultValue: "false", order: 6000, showEl: "${templateType == 'gsh'}" }
# grouperGshTemplate.testGshTemplate.showOnFolders =

# folder show type
# {valueType: "string", required: true, order: 7000, showEl: "${showOnFolders}", formElement: "dropdown", optionValues: ["certainFolders", "allFolders"] }
# grouperGshTemplate.testGshTemplate.folderShowType =

# comma separated folder uuids/names to show
# {valueType: "string", required: true, order: 8000, showEl: "${showOnFolders && folderShowType == 'certainFolders'}"}
# grouperGshTemplate.testGshTemplate.folderUuidToShow =

# folder show on descendants
# {valueType: "string", required: true, order: 9000, showEl: "${showOnFolders && folderShowType == 'certainFolders'}", formElement: "dropdown", optionValues: ["certainFolders", "oneChildLevel", "certainFoldersAndOneChildLevel", "descendants", "certainFoldersAndDescendants"]}
# grouperGshTemplate.testGshTemplate.folderShowOnDescendants =

# show on groups
# {valueType: "boolean", defaultValue: "false", order: 9100, showEl: "${templateType == 'gsh'}" }
# grouperGshTemplate.testGshTemplate.showOnGroups =

# groups show type
# {valueType: "string", required: true, order: 9200, showEl: "${showOnGroups}", formElement: "dropdown", optionValues: ["certainGroups", "groupsInFolder", "allGroups"] }
# grouperGshTemplate.testGshTemplate.groupShowType =

# comma separated group uuids/names to show
# {valueType: "string", required: true, order: 9300, showEl: "${showOnGroups && groupShowType == 'certainGroups'}"}
# grouperGshTemplate.testGshTemplate.groupUuidsToShow =

# folder uuid/name under which all the groups will see this template
# {valueType: "string", required: true, order: 9400, showEl: "${showOnGroups && groupShowType == 'groupsInFolder'}"}
# grouperGshTemplate.testGshTemplate.folderUuidForGroupsInFolder =

# group show on descendants
# {valueType: "string", required: true, order: 9500, showEl: "${showOnGroups && groupShowType == 'groupsInFolder'}", formElement: "dropdown", optionValues: ["oneChildLevel", "descendants"]}
# grouperGshTemplate.testGshTemplate.groupShowOnDescendants =

# default run button group or folder
# {valueType: "string", order: 9550, showEl: "${showOnFolders || showOnGroups}", formElement: "dropdown", optionValues: ["group", "folder"] }
# grouperGshTemplate.testGshTemplate.runButtonGroupOrFolder =

# group uuid or name for which this template will be run as default
# {valueType: "string", required: true, order: 9600, showEl: "${showOnGroups && runButtonGroupOrFolder == 'group' && showOnGroups}"}
# grouperGshTemplate.testGshTemplate.defaultRunButtonGroupUuidOrName =

# folder uuid or name for which this template will be run as default
# {valueType: "string", required: true, order: 9650, showEl: "${showOnFolders && runButtonGroupOrFolder == 'folder' && showOnFolders}"}
# grouperGshTemplate.testGshTemplate.defaultRunButtonFolderUuidOrName =

# security run type
# {valueType: "string", required: true, order: 10000,formElement: "dropdown", optionValues: ["wheel", "specifiedGroup", "privilegeOnObject", "everyone"] }
# grouperGshTemplate.testGshTemplate.securityRunType =

# group uuid can run
# {valueType: "string", required: true, order: 11000, showEl: "${securityRunType == 'specifiedGroup'}"}
# grouperGshTemplate.testGshTemplate.groupUuidCanRun =

# require folder privilege
# {valueType: "string", required: true, order: 12000, showEl: "${showOnFolders && securityRunType == 'privilegeOnObject'}", formElement: "dropdown", optionValues: ["admin", "create", "stemAttrRead", "stemAttrUpdate"] }
# grouperGshTemplate.testGshTemplate.requireFolderPrivilege =

# run as type
# {valueType: "string", required: true, order: 14000, formElement: "dropdown", optionValues: ["currentUser", "GrouperSystem", "specifiedSubject"] }
# grouperGshTemplate.testGshTemplate.runAsType =

# act as group uuid
# {valueType: "string", order: 14500, showEl: "${templateType == 'gsh'}" }
# grouperGshTemplate.testGshTemplate.actAsGroupUUID =


# run as specified subject source id
# {valueType: "string", required: true, order: 15000, formElement: "dropdown", showEl: "${runAsType == 'specifiedSubject'}", optionValuesFromClass: "edu.internet2.middleware.subject.provider.SourceManagerOptionValueDriver" }
# grouperGshTemplate.testGshTemplate.runAsSpecifiedSubjectSourceId =

# run as specified subject id
# {valueType: "string", required: true, order: 16000,  showEl: "${runAsType == 'specifiedSubject'}"}
# grouperGshTemplate.testGshTemplate.runAsSpecifiedSubjectId =

# use externalized text for labels and descriptions?
# {valueType: "boolean", defaultValue: "false", order: 16500 }
# grouperGshTemplate.testGshTemplate.externalizedText =

# template name externalized text key
# {valueType: "string", required: true, order: 17000, showEl: "${externalizedText}" }
# grouperGshTemplate.testGshTemplate.templateNameExternalizedTextKey =

# template name
# {valueType: "string", required: true, order: 17500, showEl: "${!externalizedText}" }
# grouperGshTemplate.testGshTemplate.templateName =

# template description externalized text key
# {valueType: "string", required: true, order: 18000, showEl: "${externalizedText}"}
# grouperGshTemplate.testGshTemplate.templateDescriptionExternalizedTextKey =

# template description
# {valueType: "string", required: true, order: 18500, showEl: "${!externalizedText}", formElement: "textarea"}
# grouperGshTemplate.testGshTemplate.templateDescription =

# should show in More actions
# {valueType: "boolean", defaultValue: "false", order: 18550, showEl: "${templateType == 'gsh'}"}
# grouperGshTemplate.testGshTemplate.showInMoreActions =

# More actions externalized label
# {valueType: "string", required: true, order: 18551, showEl: "${externalizedText && showInMoreActions}" }
# grouperGshTemplate.testGshTemplate.moreActionsLabelExternalizedTextKey =

# More actions label
# {valueType: "string", required: true, order: 18552, showEl: "${!externalizedText && showInMoreActions}" }
# grouperGshTemplate.testGshTemplate.moreActionsLabel =

# Display error message and output on screen
# {valueType: "boolean", defaultValue: "false", order: 18555 }
# grouperGshTemplate.testGshTemplate.displayErrorOutput =

# gsh lightweight
# {valueType: "boolean", defaultValue: "false", order: 18600, showEl: "${templateType == 'gsh'}" }
# grouperGshTemplate.testGshTemplate.gshLightweight =

# run gsh script in a transaction
# {valueType: "boolean", defaultValue: "true", order: 18700, showEl: "${templateType == 'gsh'}" }
# grouperGshTemplate.testGshTemplate.runGshInTransaction =

# use individual audits?
# {valueType: "boolean", defaultValue: "true", order: 18800, showEl: "${templateType == 'gsh'}" }
# grouperGshTemplate.testGshTemplate.useIndividualAudits =

# consolidate output
# {valueType: "boolean", defaultValue: "true", order: 18900, showEl: "${templateType == 'gsh'}" }
# grouperGshTemplate.testGshTemplate.consolidateOutput =

# simplified ui
# {valueType: "boolean", defaultValue: "false", order: 18950 }
# grouperGshTemplate.testGshTemplate.simplifiedUi =

# allow WS from no owner
# {valueType: "boolean", defaultValue: "false", order: 18975 }
# grouperGshTemplate.testGshTemplate.allowWsFromNoOwner =

# gsh template code
# {valueType: "string", required: true, order: 19000, formElement: "textarea" }
# grouperGshTemplate.testGshTemplate.gshTemplate =

# number of inputs
# {valueType: "string", defaultValue: "0", order: 20000, formElement: "dropdown", optionValues: ["1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23", "24", "25", "26", "27", "28", "29", "30", "31", "32", "33", "34", "35", "36", "37", "38", "39", "40", "41", "42", "43", "44", "45", "46", "47", "48", "49", "50"] }
# grouperGshTemplate.testGshTemplate.numberOfInputs =

# input name
# {valueType: "string", required: true, order: 21000, showEl: "${numberOfInputs > $i$}", repeatGroup: "input", repeatCount: 50}
# grouperGshTemplate.testGshTemplate.input.$i$.name =

# label externalized text key
# {valueType: "string", order: 22000, required: true, showEl: "${numberOfInputs > $i$ && externalizedText}", repeatGroup: "input", repeatCount: 50}
# grouperGshTemplate.testGshTemplate.input.$i$.labelExternalizedTextKey =

# label text
# {valueType: "string", order: 22500, required: true, showEl: "${numberOfInputs > $i$ && !externalizedText}", repeatGroup: "input", repeatCount: 50}
# grouperGshTemplate.testGshTemplate.input.$i$.label =

# label externalized description key
# {valueType: "string", order: 23000, required: true, showEl: "${numberOfInputs > $i$ && externalizedText}", repeatGroup: "input", repeatCount: 50}
# grouperGshTemplate.testGshTemplate.input.$i$.descriptionExternalizedTextKey =

# description
# {valueType: "string", order: 23500, required: true, showEl: "${numberOfInputs > $i$ && !externalizedText}", repeatGroup: "input", repeatCount: 50}
# grouperGshTemplate.testGshTemplate.input.$i$.description =

# input type
# {valueType: "string", order: 24000, showEl: "${numberOfInputs > $i$}", defaultValue: "string", repeatGroup: "input", repeatCount: 50, formElement: "dropdown", optionValues: ["integer", "boolean", "string"]}
# grouperGshTemplate.testGshTemplate.input.$i$.type =

# form element type
# {valueType: "string", order: 25000, showEl: "${numberOfInputs > $i$ && input.$i$.type != 'boolean' }", defaultValue: "text", repeatGroup: "input", repeatCount: 50, formElement: "dropdown", optionValues: ["text", "textarea", "dropdown", "password"]}
# grouperGshTemplate.testGshTemplate.input.$i$.formElementType =

# value format for dropdowns
# {valueType: "string", order: 25500, showEl: "${numberOfInputs > $i$ && input.$i$.formElementType == 'dropdown'}", defaultValue: "csv", repeatGroup: "input", repeatCount: 50, formElement: "dropdown", optionValues: ["csv", "dynamicFromTemplate", "javaclass", "json", "sql"]}
# grouperGshTemplate.testGshTemplate.input.$i$.dropdownValueFormat =

# value format csv
# {valueType: "string", order: 25600, showEl: "${numberOfInputs > $i$ && input.$i$.formElementType == 'dropdown' && input.$i$.dropdownValueFormat == 'csv'}", required: true, repeatGroup: "input", repeatCount: 50, formElement: "textarea"}
# grouperGshTemplate.testGshTemplate.input.$i$.dropdownCsvValue =

# value format sql database
# {valueType: "string", order: 25630, showEl: "${numberOfInputs > $i$ && input.$i$.formElementType == 'dropdown' && input.$i$.dropdownValueFormat == 'sql'}", required: true, repeatGroup: "input", repeatCount: 50, formElement: "dropdown", optionValuesFromClass: "edu.internet2.middleware.grouper.app.loader.db.DatabaseGrouperExternalSystem"}
# grouperGshTemplate.testGshTemplate.input.$i$.dropdownSqlDatabase =

# value format sql
# {valueType: "string", order: 25640, showEl: "${numberOfInputs > $i$ && input.$i$.formElementType == 'dropdown' && input.$i$.dropdownValueFormat == 'sql'}", required: true, repeatGroup: "input", repeatCount: 50, formElement: "textarea"}
# grouperGshTemplate.testGshTemplate.input.$i$.dropdownSqlValue =

# cache for minutes (default 2)
# {valueType: "string", order: 25660, showEl: "${numberOfInputs > $i$ && input.$i$.formElementType == 'dropdown' && input.$i$.dropdownValueFormat == 'sql'}", defaultValue: "2", repeatGroup: "input", repeatCount: 50}
# grouperGshTemplate.testGshTemplate.input.$i$.dropdownSqlCacheForMinutes =

# value format json
# {valueType: "string", order: 25700, showEl: "${numberOfInputs > $i$ && input.$i$.formElementType == 'dropdown' && input.$i$.dropdownValueFormat == 'json'}", required: true, repeatGroup: "input", repeatCount: 50, formElement: "textarea"}
# grouperGshTemplate.testGshTemplate.input.$i$.dropdownJsonValue =

# value format javaclass
# {valueType: "string", order: 25800, showEl: "${numberOfInputs > $i$ && input.$i$.formElementType == 'dropdown' && input.$i$.dropdownValueFormat == 'javaclass'}", required: true, repeatGroup: "input", repeatCount: 50}
# grouperGshTemplate.testGshTemplate.input.$i$.dropdownJavaClassValue =

# max length
# {valueType: "integer", defaultValue: "500", order: 26500, showEl: "${numberOfInputs > $i$ && (input.$i$.formElementType == 'text' || input.$i$.formElementType == 'textarea') && input.$i$.type != 'boolean'}", repeatGroup: "input", repeatCount: 50}
# grouperGshTemplate.testGshTemplate.input.$i$.maxLength =

# index
# {valueType: "string", order: 26000, showEl: "${numberOfInputs > $i$}", defaultValue: "0", repeatGroup: "input", repeatCount: 50}
# grouperGshTemplate.testGshTemplate.input.$i$.index =

# validation type
# {valueType: "string", required: true, order: 27000, showEl: "${numberOfInputs > $i$ && input.$i$.type != 'boolean' && input.$i$.formElementType != 'dropdown'}", repeatGroup: "input", repeatCount: 50, formElement: "dropdown", optionValues: ["builtin", "regex", "jexl", "none"]}
# grouperGshTemplate.testGshTemplate.input.$i$.validationType =

# builtin validation type
# {valueType: "string", required: true, order: 27500, showEl: "${numberOfInputs > $i$ && input.$i$.validationType == 'builtin'}", repeatGroup: "input", repeatCount: 50, formElement: "dropdown", optionValues: ["alpha", "alphaNumeric", "alphaNumericUnderscore", "alphaNumericDash", "alphaNumericUnderscoreDash", "noColons"]}
# grouperGshTemplate.testGshTemplate.input.$i$.validationBuiltin =

# validation regex
# {valueType: "string", required: true, order: 28000, showEl: "${numberOfInputs > $i$ && input.$i$.validationType == 'regex'}", repeatGroup: "input", repeatCount: 50}
# grouperGshTemplate.testGshTemplate.input.$i$.validationRegex =

# validation jexl
# {valueType: "string", required: true, order: 29000, showEl: "${numberOfInputs > $i$ && input.$i$.validationType == 'jexl'}", repeatGroup: "input", repeatCount: 50}
# grouperGshTemplate.testGshTemplate.input.$i$.validationJexl =

# validation message exteranlized text key
# {valueType: "string", order: 30000, repeatGroup: "input", repeatCount: 50, showEl: "${numberOfInputs > $i$ && externalizedText && input.$i$.validationType != 'none' && input.$i$.type != 'boolean' && input.$i$.formElementType != 'dropdown'}"}
# grouperGshTemplate.testGshTemplate.input.$i$.validationMessageExternalizedTextKey =

# validation message text
# {valueType: "string", order: 30500, repeatGroup: "input", repeatCount: 50, showEl: "${numberOfInputs > $i$ && !externalizedText && input.$i$.validationType != 'none' && input.$i$.type != 'boolean' && input.$i$.formElementType != 'dropdown'}"}
# grouperGshTemplate.testGshTemplate.input.$i$.validationMessage =

# required or not
# {valueType: "boolean", defaultValue: "false", order: 31000, repeatGroup: "input", repeatCount: 50, showEl: "${numberOfInputs > $i$}"}
# grouperGshTemplate.testGshTemplate.input.$i$.required =

# default value for the input if none is provided
# {valueType: "string", order: 32000, repeatGroup: "input", repeatCount: 50, showEl: "${numberOfInputs > $i$ && !input.$i$.required}"}
# grouperGshTemplate.testGshTemplate.input.$i$.defaultValue =

# show el jexl
# {valueType: "string", order: 33000, showEl: "${numberOfInputs > $i$}", repeatGroup: "input", repeatCount: 50}
# grouperGshTemplate.testGshTemplate.input.$i$.showEl =

# trim whitespace in values
# {valueType: "boolean", order: 33500, defaultValue: "true", showEl: "${numberOfInputs > $i$ && input.$i$.type != 'boolean' && input.$i$.formElementType !='dropdown'}", repeatGroup: "input", repeatCount: 50}
# grouperGshTemplate.testGshTemplate.input.$i$.trimWhitespace =


# number of tests
# {valueType: "string", defaultValue: "0", order: 34000, subSection: "test", formElement: "dropdown", optionValues: ["1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", "13", "14", "15", "16", "17", "18", "19", "20"] }
# 1grouperGshTemplate.testGshTemplate.numberOfTests =

# delete side effects if exist gsh
# {valueType: "string", order: 35000, formElement: "textarea", showEl: "${numberOfTests > $i$}", repeatGroup: "test", repeatCount: 20}
# 1grouperGshTemplate.testGshTemplate.test.$i$.deleteSideEffectsIfExistGsh =

# set up gsh
# {valueType: "string", order: 36000, formElement: "textarea", showEl: "${numberOfTests > $i$}", repeatGroup: "test", repeatCount: 20}
# 1grouperGshTemplate.testGshTemplate.test.$i$.setupGsh =

# test gsh
# {valueType: "string", order: 37000, formElement: "textarea", required: true, showEl: "${numberOfTests > $i$}", repeatGroup: "test", repeatCount: 20}
# 1grouperGshTemplate.testGshTemplate.test.$i$.testGsh =

# verify gsh
# {valueType: "string", order: 37000, formElement: "textarea", showEl: "${numberOfTests > $i$}", repeatGroup: "test", repeatCount: 20}
# 1grouperGshTemplate.testGshTemplate.test.$i$.verifyGsh =


############################################
## Ws trusted jwt config
############################################

# enabled or disabled
# {valueType: "boolean", defaultValue: "true", order: 1000 }
# grouper.jwt.trusted.testConfigId.enabled =

# subject source id
# {valueType: "string", order: 2000, formElement: "checkbox", checkboxValuesFromClass: "edu.internet2.middleware.grouper.SubjectFinder"}
# grouper.jwt.trusted.testConfigId.subjectSourceIds =

# subject id type
# {valueType: "string", required: true, order: 3000, formElement: "dropdown", optionValues: ["subjectId", "subjectIdentifier", "subjectIdOrIdentifier"] }
# grouper.jwt.trusted.testConfigId.subjectIdType =

# some claim name that has the subjectId in it.  optional, can just label claim name as "subjectId", "subjectIdentifier", or "subjectIdOrIdentifier".  e.g. employeeId
# {valueType: "string", order: 4000 }
# grouper.jwt.trusted.testConfigId.subjectIdClaimName =

# JWTs only last for so long.  e.g. 600 is 10 minutes.  -1 means never expire (not recommended)
# {valueType: "integer", order: 5000}
# grouper.jwt.trusted.testConfigId.expirationSeconds =

# number of keys
# {valueType: "string", defaultValue: "0", order: 6000, formElement: "dropdown", optionValues: ["1", "2", "3", "4", "5", "6", "7", "8", "9", "10"] }
# grouper.jwt.trusted.testConfigId.numberOfKeys =

# public key
# {valueType: "string", formElement: "textarea", required: true, order: 7000, showEl: "${numberOfKeys > $i$}", repeatGroup: "key", repeatCount: 10}
# grouper.jwt.trusted.testConfigId.key.$i$.publicKey =

# encryption type
# {valueType: "string", required: true, order: 8000, showEl: "${numberOfKeys > $i$}", repeatGroup: "key", repeatCount: 10, formElement: "dropdown", optionValues: ["RS-256", "RS-384", "RS-512"]}
# grouper.jwt.trusted.testConfigId.key.$i$.encryptionType =

# optional: yyyy-mm-dd hh:mm:ss.SSS
# {valueType: "string", order: 9000, showEl: "${numberOfKeys > $i$}", repeatGroup: "key", repeatCount: 10}
# grouper.jwt.trusted.testConfigId.key.$i$.expiresOn =


######################################
## Global entity attribute resolvers
## These SQL or LDAP attribute resolvers could be used in multiple provisioners or other areas
## entityAttributeResolverId is the unique configId for the attribute resolver
######################################

# Entity attribute resolver type
# {valueType: "string", order: 1000, regex: "^entityAttributeResolver\\.([^.]+)\\.resolverType$", required: true, formElement: "dropdown", optionValues: ["sql", "ldap"]}
# entityAttributeResolver.entityAttributeResolverId.resolverType =

# if this resolver is enabled
# {valueType: "boolean", defaultValue: "true", order: 2000 }
# entityAttributeResolver.entityAttributeResolverId.enabled =

# SQL configId for database connection, default to grouper database
# {valueType: "string", order: 3000, regex: "^entityAttributeResolver\\.([^.]+)\\.sqlConfigId$", formElement: "dropdown", optionValuesFromClass: "edu.internet2.middleware.grouper.app.loader.db.DatabaseGrouperExternalSystem", showEl: "${resolverType == 'sql'}"}
# entityAttributeResolver.entityAttributeResolverId.sqlConfigId =

# Table of user data, must have a subject source (optional), and matching/search col (required), and columns with single valued attributes
# {valueType: "string", order: 4000, regex: "^entityAttributeResolver\\.([^.]+)\\.tableOrViewName$", required: true, showEl: "${resolverType == 'sql'}"}
# entityAttributeResolver.entityAttributeResolverId.tableOrViewName =

# Comma separated column names from the entity attributes table that need to be added as attributes in the target system
# {valueType: "string", order: 4500, regex: "^entityAttributeResolver\\.([^.]+)\\.columnNames$", required: true, showEl: "${resolverType == 'sql'}"}
# entityAttributeResolver.entityAttributeResolverId.columnNames =

# The subject source id column
# {valueType: "string", order: 5000, regex: "^entityAttributeResolver\\.([^.]+)\\.subjectSourceIdColumn$", showEl: "${resolverType == 'sql'}", formElement: "dropdown", optionValuesFromClass: "edu.internet2.middleware.subject.provider.SourceManagerOptionValueDriver"}
# entityAttributeResolver.entityAttributeResolverId.subjectSourceIdColumn =

# Column that searches and matches an entity
# {valueType: "string", order: 6000, regex: "^entityAttributeResolver\\.([^.]+)\\.subjectSearchMatchingColumn$", required: true, showEl: "${resolverType == 'sql'}"}
# entityAttributeResolver.entityAttributeResolverId.subjectSearchMatchingColumn =

# Grouper attribute that matches the row
# {valueType: "string", order: 7000, regex: "^entityAttributeResolver\\.([^.]+)\\.grouperAttributeThatMatchesRow$", required: true, showEl: "${resolverType == 'sql'}", formElement: "dropdown", optionValues: ['subjectId', 'subjectIdentifer0']}
# entityAttributeResolver.entityAttributeResolverId.grouperAttributeThatMatchesRow =

# The last updated column, e.g. a timestamp or number field (number of millis since 1970)
# {valueType: "string", order: 8000, regex: "^entityAttributeResolver\\.([^.]+)\\.lastUpdatedColumn$", showEl: "${resolverType == 'sql'}"}
# entityAttributeResolver.entityAttributeResolverId.lastUpdatedColumn =

# The last updated column type, e.g. timestamp, millisSince1970.  If this is provided then the incremental provisioner will process people that have been recently updated
# {valueType: "string", order: 9000, regex: "^entityAttributeResolver\\.([^.]+)\\.lastUpdatedColumn$", showEl: "${resolverType == 'sql'}", formElement: "dropdown", optionValues: ['timestamp', 'millisSince1970']}
# entityAttributeResolver.entityAttributeResolverId.lastUpdatedType =

# LDAP configId for connection
# {valueType: "string", order: 10000, regex: "^entityAttributeResolver\\.([^.]+)\\.ldapConfigId$", required: true, formElement: "dropdown", optionValuesFromClass: "edu.internet2.middleware.grouper.app.externalSystem.LdapGrouperExternalSystem", showEl: "${resolverType == 'ldap'}"}
#entityAttributeResolver.entityAttributeResolverId.ldapConfigId =

# Base DN for search
# {valueType: "string", order: 11000, regex: "^entityAttributeResolver\\.([^.]+)\\.baseDn$", showEl: "${resolverType == 'ldap'}", required: true}
# entityAttributeResolver.entityAttributeResolverId.baseDn =

# subject source id of subjects
# {valueType: "string", order: 11500, regex: "^entityAttributeResolver\\.([^.]+)\\.subjectSourceId$", formElement: "dropdown", optionValuesFromClass: "edu.internet2.middleware.subject.provider.SourceManagerOptionValueDriver"}
# entityAttributeResolver.entityAttributeResolverId.subjectSourceId =

# Search scope, default is SUBTREE_SCOPE
# {valueType: "string", order: 12000, regex: "^entityAttributeResolver\\.([^.]+)\\.searchScope$", showEl: "${resolverType == 'ldap'}", required: true, formElement: "dropdown", optionValues: ['ONELEVEL_SCOPE', ' SUBTREE_SCOPE']}
# entityAttributeResolver.entityAttributeResolverId.searchScope =

# If there is more to the filter for all users or selected user than just the search attribute, then put that here.  e.g. if you have a search attribute of employeeID, and you want the
# filter to be (&(employeeID=12345678)(objectClass=person)) then you should fill in this value as: (objectClass=person)
# {valueType: "string", order: 13000, regex: "^entityAttributeResolver\\.([^.]+)\\.filterPart$", showEl: "${resolverType == 'ldap'}"}
# entityAttributeResolver.entityAttributeResolverId.filterPart =

# Attributes to retrieve (multi-valued attributes will be stored in appropriate structure)
# {valueType: "string", order: 14000, regex: "^entityAttributeResolver\\.([^.]+)\\.ldapAttributes$", showEl: "${resolverType == 'ldap'}", required: true}
# entityAttributeResolver.entityAttributeResolverId.ldapAttributes =

# Which attributes are multivalued
# {valueType: "string", order: 14500, regex: "^entityAttributeResolver\\.([^.]+)\\.multiValuedLdapAttributes$", showEl: "${resolverType == 'ldap'}"}
# entityAttributeResolver.entityAttributeResolverId.multiValuedLdapAttributes =

# LDAP matching / search attribute, this needs to be the same as the subject ID or subject identifier0
# {valueType: "string", order: 15000, regex: "^entityAttributeResolver\\.([^.]+)\\.subjectSearchMatchingAttribute$", showEl: "${resolverType == 'ldap'}", required: true}
# entityAttributeResolver.entityAttributeResolverId.subjectSearchMatchingAttribute =

# Grouper attribute that matches the record
# {valueType: "string", order: 16000, regex: "^entityAttributeResolver\\.([^.]+)\\.grouperAttributeThatMatchesRecord$", required: true, showEl: "${resolverType == 'ldap'}", formElement: "dropdown", optionValues: ['subjectId', 'subjectIdentifer0']}
# entityAttributeResolver.entityAttributeResolverId.grouperAttributeThatMatchesRecord =

# If provided the incremental can poll for new records to process.  e.g. the filter would be (openldap / edirectory) (modifyTimestamp>=20211119082103Z), or Active Directory: (modifyTimestamp>= 20211119163324.0Z)
# {valueType: "string", order: 17000, regex: "^entityAttributeResolver\\.([^.]+)\\.lastUpdatedAttribute$", showEl: "${resolverType == 'ldap'}"}
# entityAttributeResolver.entityAttributeResolverId.lastUpdatedAttribute =

# This is optional, if not selected it will select default 20211119082103Z for a non AD connection and activeDirectory 20211119163324.0Z for
# an active directory connection (which is selected in the external system)
# {valueType: "string", order: 18000, regex: "^entityAttributeResolver\\.([^.]+)\\.ldapLastUpdatedFormat$", showEl: "${resolverType == 'ldap'}", formElement: "dropdown", optionValues: ['default', 'activeDirectory']}
# entityAttributeResolver.entityAttributeResolverId.ldapLastUpdatedFormat =


############################################
## OIDC external system
############################################

# if this oidc connector is enabled
# {valueType: "boolean", defaultValue: "true", order: 1000 }
# grouper.oidcExternalSystem.myOidcConfigId.enabled =

# Do you want to specify URLs or want to use the well known URL?
# {valueType: "boolean", required: true, order: 1250 }
# grouper.oidcExternalSystem.myOidcConfigId.useConfigurationMetadata =

# Configuration metadata uri
# {valueType: "string", required: true, order: 1500, showEl: "${useConfigurationMetadata}"}
# grouper.oidcExternalSystem.myOidcConfigId.configurationMetadataUri =

# url to decode the oidc code into an access token: https://idp.institution.edu/idp/profile/oidc/token
# {valueType: "string", required: true, order: 2000, showEl: "${!useConfigurationMetadata}" }
# grouper.oidcExternalSystem.myOidcConfigId.tokenEndpointUri =

# URL to log in (without parameters) https://idp.institution.edu/idp/profile/oidc/authorize
# {valueType: "string", required: false, order: 3500, showEl: "${!useConfigurationMetadata}" }
# grouper.oidcExternalSystem.myOidcConfigId.authorizeUri =

# client id to authorize url (required)
# {valueType: "string", required: true, order: 4000 }
# grouper.oidcExternalSystem.myOidcConfigId.clientId =

# secret to ws (required)
# {valueType: "password", sensitive: true, required: true, order: 5000 }
# grouper.oidcExternalSystem.myOidcConfigId.clientSecret =

# proxy requests here, e.g. https://server:1234
# {valueType: "string", order: 6000 }
# grouper.oidcExternalSystem.myOidcConfigId.proxyUrl =

# socks or http
# {valueType: "string", order: 7000, formElement: "dropdown", optionValues: ["PROXY_HTTP", "PROXY_SOCKS5"] }
# grouper.oidcExternalSystem.myOidcConfigId.proxyType =

# needed for retrieving an access token, e.g. https://my.app/someUrlBackFromIdp
# {valueType: "string", order: 10000 }
# grouper.oidcExternalSystem.myOidcConfigId.redirectUri =

# Scope to retrieve from oidc, e.g. openid email profile (required)
# {valueType: "string", required: true, order: 11000}
# grouper.oidcExternalSystem.myOidcConfigId.scope =

# subject source id
# {valueType: "string", order: 12000, formElement: "checkbox", checkboxValuesFromClass: "edu.internet2.middleware.grouper.SubjectFinder"}
# grouper.oidcExternalSystem.myOidcConfigId.subjectSourceIds =

# Subject id type
# {valueType: "string", required: true, order: 13000, formElement: "dropdown", optionValues: ["subjectId", "subjectIdentifier", "subjectIdOrIdentifier"] }
# grouper.oidcExternalSystem.myOidcConfigId.subjectIdType =

# Source for claims
# {valueType: "string", defaultValue: "userInfoEndpoint", order: 13100, formElement: "dropdown", optionValues: ["userInfoEndpoint", "idToken"]}
# grouper.oidcExternalSystem.myOidcConfigId.claimSource =

# url to get the user info from the access token https://idp.pennkey.upenn.edu/idp/profile/oidc/userinfo
# {valueType: "string", required: true, order: 13200, indent: 1, showEl: "${!useConfigurationMetadata && claimSource == 'userInfoEndpoint'}" }
# grouper.oidcExternalSystem.myOidcConfigId.userInfoUri =

# Token issuer (iss claim in id token)
# {valueType: "string", required: true, order: 13300, indent: 1, showEl: "${!useConfigurationMetadata && claimSource == 'idToken'}" }
# grouper.oidcExternalSystem.myOidcConfigId.issuer =

# The maximum acceptable clock skew in seconds for timestamps in the id token
# {valueType: "integer", defaultValue: "300", order: 13400, indent: 1, showEl: "${claimSource == 'idToken'}" }
# grouper.oidcExternalSystem.myOidcConfigId.maxClockSkew =

# some claim name that has the subjectId / subjectIdentifier / subjectIdOrIdentifier in it.  e.g. preferred_username
# {valueType: "string", defaultValue: "preferred_username", order: 14000 }
# grouper.oidcExternalSystem.myOidcConfigId.subjectIdClaimName =

# e.g. code
# {valueType: "string", order: 15000 }
# grouper.oidcExternalSystem.myOidcConfigId.oidcResponseType =

# Use for UI?
# {valueType: "boolean", defaultValue: "false", order: 16000 }
# grouper.oidcExternalSystem.myOidcConfigId.useForUi =

# Use for WS?
# {valueType: "boolean", defaultValue: "false", order: 17000 }
# grouper.oidcExternalSystem.myOidcConfigId.useForWs =


############################################
## osgi config
############################################

# directory of plugins, default to /opt/grouper/grouperWebapp/WEB-INF/grouperPlugins
# {valueType: "string", required: true, order: 1000}
grouper.osgi.jar.dir = /opt/grouper/grouperWebapp/WEB-INF/grouperPlugins

# directory of felix cache of plugins, default to /opt/grouper/grouperWebapp/WEB-INF/grouperFelixCache
# {valueType: "string", required: true, order: 2000}
grouper.felix.cache.rootdir = /opt/grouper/grouperWebapp/WEB-INF/grouperFelixCache

# only enable osgi if you use it
# {valueType: "boolean", defaultValue: "false", order: 3000}
grouper.osgi.enable =

# jar name of plugin e.g. my-plugin-with-embedded-dependencies-1.2.3.jar
# {valueType: "string", required: true, order: 10000}
# grouperOsgiPlugin.testConfigId.jarName =

# number of implementations that this jar provides
# {valueType: "integer", required: true, order: 11000, formElement: "dropdown", optionValues: ["1", "2", "3", "4", "5", "6", "7", "8", "9", "10"] }
# grouperOsgiPlugin.testConfigId.numberOfImplementations =

# implementation class that implements an interface, e.g. some.package.SomeClass
# {valueType: "string", required: true, order: 12000, showEl: "${numberOfImplementations > $i$}", repeatGroup: "osgiImplementation", repeatCount: 10}
# grouperOsgiPlugin.testConfigId.osgiImplementation.$i$.implementationClass =

# interface that the class implements.  e.g. edu.interent2.middleware.grouper.some.package.SomeInterface
# {valueType: "string", required: true, order: 13000, showEl: "${numberOfImplementations > $i$}", repeatGroup: "osgiImplementation", repeatCount: 10}
# grouperOsgiPlugin.testConfigId.osgiImplementation.$i$.implementsInterface =


############################################
## logging loggers (levels and appenders)
## dynamically update grouper on config change
############################################


# if should check for dynamic updates
# {valueType: "boolean", defaultValue: "true" }
# grouper.logging.dynamicUpdates.run =

# sleep for this amount of seconds after each run
# {valueType: "boolean", defaultValue: "60" }
# grouper.logging.dynamicUpdates.checkAfterSeconds =

# this is the package or class to log, required
# {valueType: "string", regex: "^grouper\\.logger\\.[^.]+\\.name$"}
# grouper.logger..name =

# required log level, should be one of: off, fatal, error, warn, info, debug, trace, all
# {valueType: "string", regex: "^grouper\\.logger\\.[^.]+\\.level$", formElement: "dropdown", optionValues: ["off", "fatal", "error", "warn", "info", "debug", "trace", "all"] }
# grouper.logger..level =

# which appender to send logs to (optional), default to the appender for the class logs to, or default to: grouper_error
# e.g. CATALINA, stderr, grouper_error, grouper_daemon, grouper_pspng, grouper_provisioning, grouper_ws, grouper_ws_longRunning
# {valueType: "string", regex: "^grouper\\.logger\\.[^.]+\\.appender$"}
# grouper.logger..appender =


###########################################################################
## institution specific external systems. For e.g. for custom provisioner
###########################################################################

# This is the external system class that extends edu.internet2.middleware.grouper.app.externalSystem.GrouperExternalSystem
# {valueType: "string", regex: "^grouperExtraExternalSystem\\.[^.]+\\.class$", mustExtendClass: "edu.internet2.middleware.grouper.app.externalSystem.GrouperExternalSystem"}
# grouperExtraExternalSystem..class =

###########################################################################
## grouper dictionary
###########################################################################

# max terms in memory
# {valueType: "integer"}
grouper.dictionary.maxTermsInMemoryCache = 50000

# how long to cache terms
# {valueType: "integer"}
grouper.dictionary.cacheStoreForMinutes = 120


###########################################################################
## privacy realms
###########################################################################

# name of this privacy realm, not really used, just here to configure the realm
# {valueType: "string", required: true, regex: "^grouperPrivacyRealm\\.[^.]+\\.privacyRealmName$"}
# grouperPrivacyRealm.privacyRealmConfigId.privacyRealmName = 

# if this field can be seen by anyone, even if not authenticated
# {valueType: "boolean", defaultValue: "false", regex: "^grouperPrivacyRealm\\.[^.]+\\.privacyRealmPublic$"}
# grouperPrivacyRealm.privacyRealmConfigId.privacyRealmPublic = 

# if this field can be seen by anyone who is authenticated
# {valueType: "boolean", defaultValue: "false", regex: "^grouperPrivacyRealm\\.[^.]+\\.privacyRealmAuthenticated$", showEl: "${!privacyRealmPublic}"}
# grouperPrivacyRealm.privacyRealmConfigId.privacyRealmAuthenticated = 

# if this field can be seen by grouper sysadmins who are not in the viewers group
# {valueType: "boolean", defaultValue: "true", regex: "^grouperPrivacyRealm\\.[^.]+\\.privacyRealmSysadminsCanView$", showEl: "${!privacyRealmPublic && !privacyRealmAuthenticated}"}
# grouperPrivacyRealm.privacyRealmConfigId.privacyRealmSysadminsCanView = 

# group name of the group who can view and use fields marked in this privacy realm
# {valueType: "string", required: true, regex: "^grouperPrivacyRealm\\.[^.]+\\.privacyRealmViewersGroupName$", showEl: "${!privacyRealmPublic && !privacyRealmAuthenticated}"}
# grouperPrivacyRealm.privacyRealmConfigId.privacyRealmViewersGroupName =

# group name of the group who can update and use fields marked in this privacy realm
# {valueType: "string", required: true, regex: "^grouperPrivacyRealm\\.[^.]+\\.privacyRealmUpdatersGroupName$", showEl: "${!privacyRealmPublic && !privacyRealmAuthenticated}"}
# grouperPrivacyRealm.privacyRealmConfigId.privacyRealmUpdatersGroupName = 

# group name of the group who can read and use fields marked in this privacy realm
# {valueType: "string", required: true, regex: "^grouperPrivacyRealm\\.[^.]+\\.privacyRealmReadersGroupName$", showEl: "${!privacyRealmPublic && !privacyRealmAuthenticated}"}
# grouperPrivacyRealm.privacyRealmConfigId.privacyRealmReadersGroupName =


###########################################################################
## grouper data fields
###########################################################################

# aliases that this field is referred to as
# {valueType: "string", required: true, multiple: true, regex: "^grouperDataField\\.[^.]+\\.fieldAliases$"}
# grouperDataField.dataFieldConfigId.fieldAliases =

# privacy realm for people who can see or use this data field
# {valueType: "string", required: true, regex: "^grouperDataField\\.[^.]+\\.fieldPrivacyRealm$", formElement: "dropdown", optionValuesFromClass: "edu.internet2.middleware.grouper.dataField.GrouperPrivacyRealm"}
# grouperDataField.dataFieldConfigId.fieldPrivacyRealm =

# Description html
# {valueType: "string", required: true, regex: "^grouperDataField\\.[^.]+\\.descriptionHtml$", formElement: "textarea"}
# grouperDataField.dataFieldConfigId.descriptionHtml =

# Data owner html
# {valueType: "string", regex: "^grouperDataField\\.[^.]+\\.dataOwnerHtml$", formElement: "textarea"}
# grouperDataField.dataFieldConfigId.dataOwnerHtml =

# How to get access html
# {valueType: "string", regex: "^grouperDataField\\.[^.]+\\.howToGetAccessHtml$", formElement: "textarea"}
# grouperDataField.dataFieldConfigId.howToGetAccessHtml =

# Zero to many examples html
# {valueType: "string", regex: "^grouperDataField\\.[^.]+\\.zeroToManyExamplesHtml$", formElement: "textarea"}
# grouperDataField.dataFieldConfigId.zeroToManyExamplesHtml =               

# if this field can have multiple values
# {valueType: "boolean", defaultValue: "false", regex: "^grouperDataField\\.[^.]+\\.fieldMultiValued$"}
# grouperDataField.dataFieldConfigId.fieldMultiValued = 

# data type for this field
# {valueType: "string", defaultValue: "string", regex: "^grouperDataField\\.[^.]+\\.fieldDataType$", formElement: "dropdown", optionValues: ["string", "integer", "timestamp", "boolean"]}
# grouperDataField.dataFieldConfigId.fieldDataType = 

# data structure for this field
# {valueType: "string", defaultValue: "attribute", regex: "^grouperDataField\\.[^.]+\\.fieldDataStructure$", formElement: "dropdown", optionValues: ["attribute", "rowColumn"]}
# grouperDataField.dataFieldConfigId.fieldDataStructure = 

# use of this field.  If it is access related then it will be available in an abac script
# {valueType: "string", defaultValue: "access", regex: "^grouperDataField\\.[^.]+\\.fieldDataUse$", formElement: "dropdown", optionValues: ["access", "identifier", "informational"]}
# grouperDataField.dataFieldConfigId.fieldDataUse = 

# if this field is calculated from multiple providers.  If it is calculated from one provider, it can be configured in that provider
# {valueType: "boolean", defaultValue: "false", regex: "^grouperDataField\\.[^.]+\\.fieldDataCalculated$"}
# grouperDataField.dataFieldConfigId.fieldDataCalculated = 

# script to build this data field value from multiple providers
# {valueType: "string", defaultValue: "false", regex: "^grouperDataField\\.[^.]+\\.fieldDataCalculatedScript$", formElement: "textarea"}
# grouperDataField.dataFieldConfigId.fieldDataCalculatedScript = 

# if this informational data field is dynamic based on privacy levels
# {valueType: "boolean", defaultValue: "false", regex: "^grouperDataField\\.[^.]+\\.fieldDataInformationalDynamicPrivacyLevel$", showEl: "${fieldDataUse == 'informational'}"}
# grouperDataField.dataFieldConfigId.fieldDataInformationalDynamicPrivacyLevel = 

# Config ids in order to see if the user can see them, 
# {valueType: "string", regex: "^grouperDataField\\.[^.]+\\.fieldDataInformationalDynamicPrivacyLevelConfigIds$", showEl: "${fieldDataInformationalDynamicPrivacyLevel}"}
# grouperDataField.dataFieldConfigId.fieldDataInformationalDynamicPrivacyLevelConfigIds = 

# does this identifier require the data field name or is the identifier unique across all identifiers
# {valueType: "boolean", regex: "^grouperDataField\\.[^.]+\\.fieldDataIdentifierRequiresName$", showEl: "${fieldDataUse == 'identifier'}"}
# grouperDataField.dataFieldConfigId.fieldDataIdentifierRequiresName = 

# field source.  Could be sourced from a data provider.  Could be sourced from a group membership.
# {valueType: "string", defaultValue: "provider", regex: "^grouperDataField\\.[^.]+\\.fieldDataSource$", formElement: "dropdown", optionValues: ["provider", "group"], showEl: "${fieldDataUse == 'access'}"}
# grouperDataField.dataFieldConfigId.fieldDataSource = 

# group name of source of this data field
# {valueType: "string", defaultValue: "attribute", regex: "^grouperDataField\\.[^.]+\\.fieldDataGroupName$", showEl: "${fieldDataSource == 'group'}"}
# grouperDataField.dataFieldConfigId.fieldDataGroupName = 

# should this field be stored in PIT.  All identifiers will be in PIT.
# {valueType: "boolean", regex: "^grouperDataField\\.[^.]+\\.fieldDataStorePit$", showEl: "${fieldDataUse == 'access' || fieldDataUse == 'informational' }"}
# grouperDataField.dataFieldConfigId.fieldDataStorePit = 

# how many days to store PIT.
# {valueType: "integer", defaultValue: "730", regex: "^grouperDataField\\.[^.]+\\.fieldDataStorePitDays$", showEl: "${fieldDataStorePit}"}
# grouperDataField.dataFieldConfigId.fieldDataStorePitDays = 

# Is this assignable to groups or individuals.
# {valueType: "string", regex: "^grouperDataField\\.[^.]+\\.fieldDataAssignableTo$", formElement: "dropdown", optionValues: ["global", "groups", "individuals"]}
# grouperDataField.dataFieldConfigId.fieldDataAssignableTo = 

# Are the values for this data fields a list of values with less than 100ish options?  Used for validation of ABAC scripts
# {valueType: "boolean", defaultValue: "false", regex: "^grouperDataField\\.[^.]+\\.fieldDataLov$"}
# grouperDataField.dataFieldConfigId.fieldDataLov = 

# Should the list of value be existing assigned values?  This is the easiest way to configure, but every value must be assigned at least once
# {valueType: "boolean", defaultValue: "false", regex: "^grouperDataField\\.[^.]+\\.fieldDataLovExistingValues$", showEl: "${fieldDataLov}"}
# grouperDataField.dataFieldConfigId.fieldDataLovExistingValues = 

# Database external system config ID for list of values
# {valueType: "string", required: true, regex: "^grouperDataField\\.[^.]+\\.fieldDataLovDatabaseConfigId$", showEl: "${fieldDataLov && !fieldDataLovExistingValues}"}
# grouperDataField.dataFieldConfigId.fieldDataLovDatabaseConfigId = 

# Database query for list of values should have one column and the data type (string, int, etc) will be converted to the data field type.
# {valueType: "string", required: true, regex: "^grouperDataField\\.[^.]+\\.fieldDataLovDatabaseConfigId$", showEl: "${fieldDataLov && !fieldDataLovExistingValues}"}
# grouperDataField.dataFieldConfigId.fieldDataLovDatabaseQuery = 

# How long to cache list of values.  Note: if a new value is used which is not known, the cache will refresh to be sure.  So 1440 (one day) should be fine.
# {valueType: "integer", defaultValue: "1440", regex: "^grouperDataField\\.[^.]+\\.fieldDataLovDatabaseConfigId$", showEl: "${fieldDataLov && !fieldDataLovExistingValues}"}
# grouperDataField.dataFieldConfigId.fieldDataLovCacheforMinutes = 




###########################################################################
## grouper data rows
###########################################################################

# aliases that this row is referred to as
# {valueType: "string", order: 1000, subSection: "dataRowConfig", required: true, multiple: true, regex: "^grouperDataRow\\.[^.]+\\.rowAliases$"}
# grouperDataRow.dataRowConfigId.rowAliases = 

# privacy realm for people who can see or use this data row
# {valueType: "string", order: 2000, subSection: "dataRowConfig", required: true, regex: "^grouperDataRow\\.[^.]+\\.rowPrivacyRealm$", formElement: "dropdown", optionValuesFromClass: "edu.internet2.middleware.grouper.dataField.GrouperPrivacyRealm"}
# grouperDataRow.dataRowConfigId.rowPrivacyRealm = 

# Description html
# {valueType: "string", required: true, regex: "^dataRowConfigId\\.[^.]+\\.descriptionHtml$", formElement: "textarea"}
# grouperDataRow.dataRowConfigId.descriptionHtml =

# Data owner html
# {valueType: "string", regex: "^dataRowConfigId\\.[^.]+\\.dataOwnerHtml$", formElement: "textarea"}
# grouperDataRow.dataRowConfigId.dataOwnerHtml =

# How to get access html
# {valueType: "string", regex: "^dataRowConfigId\\.[^.]+\\.howToGetAccessHtml$", formElement: "textarea"}
# grouperDataRow.dataRowConfigId.howToGetAccessHtml =

# Zero to many examples html
# {valueType: "string", regex: "^dataRowConfigId\\.[^.]+\\.zeroToManyExamplesHtml$", formElement: "textarea"}
# grouperDataRow.dataRowConfigId.zeroToManyExamplesHtml = 

# number of fields in this row
# {valueType: "string", order: 3000, subSection: "dataRowConfig", required: true, regex: "^grouperDataRow\\.[^.]+\\.rowNumberOfDataFields$", formElement: "dropdown", optionValues: ["1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23", "24", "25", "26", "27", "28", "29", "30"]}
# grouperDataRow.dataRowConfigId.rowNumberOfDataFields = 

# data field for this column
# {valueType: "string", required: true, order: 4000, showEl: "${rowNumberOfDataFields > $i$}", repeatGroup: "rowDataField", repeatCount: 30, formElement: "dropdown", optionValuesFromClass: "edu.internet2.middleware.grouper.dataField.GrouperDataField"}
# grouperDataRow.dataRowConfigId.rowDataField.$i$.colDataFieldConfigId =

# if this data field is the key or part of a composite key that uniquely matches this row from source and grouper
# {valueType: "boolean", order: 4010, defaultValue: "false", showEl: "${rowNumberOfDataFields > $i$}", repeatGroup: "rowDataField", repeatCount: 30}
# grouperDataRow.dataRowConfigId.rowDataField.$i$.rowKeyField =


###########################################################################
## grouper data providers
###########################################################################

# data provider name, not really needed or used, but there to setup the provider
# {valueType: "string", required: true, multiple: true, regex: "^grouperDataProvider\\.[^.]+\\.name$"}
# grouperDataProvider.dataProviderConfigId.name = 

###########################################################################
## grouper data provider change log query
###########################################################################

# data provider config id
# {valueType: "string", order: 1000, subSection: "dataProviderChangeLogQueryConfig", required: true, regex: "^grouperDataProviderChangeLogQuery\\.[^.]+\\.providerConfigId$", formElement: "dropdown", optionValuesFromClass: "edu.internet2.middleware.grouper.dataField.GrouperDataProvider"}
# grouperDataProviderChangeLogQuery.dataProviderChangeLogQueryConfigId.providerConfigId =

# data provider change log query type
# {valueType: "string", order: 2000, subSection: "dataProviderChangeLogQueryConfig", required: true, regex: "^grouperDataProviderChangeLogQuery\\.[^.]+\\.providerChangeLogQueryType$", formElement: "dropdown", optionValues: ["sql"]}
# grouperDataProviderChangeLogQuery.dataProviderChangeLogQueryConfigId.providerChangeLogQueryType =

# SQL config id
# {valueType: "string", order: 3000, subSection: "dataProviderChangeLogQueryConfig", required: true, formElement: "dropdown", optionValuesFromClass: "edu.internet2.middleware.grouper.app.loader.db.DatabaseGrouperExternalSystem", regex: "^grouperDataProviderChangeLogQuery\\.[^.]+\\.providerChangeLogQuerySqlConfigId$", showEl: "${providerChangeLogQueryType == 'sql'}"}
# grouperDataProviderChangeLogQuery.dataProviderChangeLogQueryConfigId.providerChangeLogQuerySqlConfigId =

# SQL change log query
# {valueType: "string", order: 4000, subSection: "dataProviderChangeLogQueryConfig", required: true, regex: "^grouperDataProviderChangeLogQuery\\.[^.]+\\.providerChangeLogQuerySqlQuery$", showEl: "${providerChangeLogQueryType == 'sql'}"}
# grouperDataProviderChangeLogQuery.dataProviderChangeLogQueryConfigId.providerChangeLogQuerySqlQuery =

# Change log attribute that is the primary key
# {valueType: "string", order: 5000, subSection: "dataProviderChangeLogQueryConfig", required: true, regex: "^grouperDataProviderChangeLogQuery\\.[^.]+\\.providerChangeLogQueryPrimaryKeyAttribute$"}
# grouperDataProviderChangeLogQuery.dataProviderChangeLogQueryConfigId.providerChangeLogQueryPrimaryKeyAttribute =

# Change log attribute that contains the timestamp for when this row was added, e.g. a timestamp or number field (number of millis since 1970).  Should be indexed where possible.
# {valueType: "string", order: 6000, subSection: "dataProviderChangeLogQueryConfig", required: true, regex: "^grouperDataProviderChangeLogQuery\\.[^.]+\\.providerChangeLogQueryTimestampAttribute$"}
# grouperDataProviderChangeLogQuery.dataProviderChangeLogQueryConfigId.providerChangeLogQueryTimestampAttribute =

# Change log attribute which links this data to subjects
# {valueType: "string", order: 7000, subSection: "dataProviderChangeLogQueryConfig", required: true, regex: "^grouperDataProviderChangeLogQuery\\.[^.]+\\.providerChangeLogQuerySubjectIdAttribute$"}
# grouperDataProviderChangeLogQuery.dataProviderChangeLogQueryConfigId.providerChangeLogQuerySubjectIdAttribute =

# Which type of subject id
# {valueType: "string", order: 8000, subSection: "dataProviderChangeLogQueryConfig", regex: "^grouperDataProviderChangeLogQuery\\.[^.]+\\.providerChangeLogQuerySubjectIdType$", formElement: "dropdown", optionValues: ["subjectId", "subjectIdentifier"]}
# grouperDataProviderChangeLogQuery.dataProviderChangeLogQueryConfigId.providerChangeLogQuerySubjectIdType =

# which subject source this is a subject id for
# {valueType: "string", order: 9000, subSection: "dataProviderChangeLogQueryConfig", regex: "^grouperDataProviderChangeLogQuery\\.[^.]+\\.providerChangeLogQuerySubjectSourceId$"}
# grouperDataProviderChangeLogQuery.dataProviderChangeLogQueryConfigId.providerChangeLogQuerySubjectSourceId =


###########################################################################
## grouper data provider query
###########################################################################

# data provider config id
# {valueType: "string", order: 1000, subSection: "dataProviderQueryConfig", required: true, regex: "^grouperDataProviderQuery\\.[^.]+\\.providerConfigId$", formElement: "dropdown", optionValuesFromClass: "edu.internet2.middleware.grouper.dataField.GrouperDataProvider"}
# grouperDataProviderQuery.dataProviderQueryConfigId.providerConfigId = 

# data provider query type
# {valueType: "string", order: 2000, subSection: "dataProviderQueryConfig", required: true, regex: "^grouperDataProviderQuery\\.[^.]+\\.providerQueryType$", formElement: "dropdown", optionValues: ["sql", "ldap"]}
# grouperDataProviderQuery.dataProviderQueryConfigId.providerQueryType = 

# SQL config id
# {valueType: "string", order: 3000, subSection: "dataProviderQueryConfig", required: true, formElement: "dropdown", optionValuesFromClass: "edu.internet2.middleware.grouper.app.loader.db.DatabaseGrouperExternalSystem", regex: "^grouperDataProviderQuery\\.[^.]+\\.providerQuerySqlConfigId$", showEl: "${providerQueryType == 'sql'}"}
# grouperDataProviderQuery.dataProviderQueryConfigId.providerQuerySqlConfigId = 

# LDAP config id
# {valueType: "string", order: 3500, subSection: "dataProviderQueryConfig", required: true, formElement: "dropdown", optionValuesFromClass: "edu.internet2.middleware.grouper.app.externalSystem.LdapGrouperExternalSystem", regex: "^grouperDataProviderQuery\\.[^.]+\\.providerQueryLdapConfigId$", showEl: "${providerQueryType == 'ldap'}"}
# grouperDataProviderQuery.dataProviderQueryConfigId.providerQueryLdapConfigId = 

# SQL query
# {valueType: "string", order: 4000, subSection: "dataProviderQueryConfig", required: true, regex: "^grouperDataProviderQuery\\.[^.]+\\.providerQuerySqlQuery$", showEl: "${providerQueryType == 'sql'}"}
# grouperDataProviderQuery.dataProviderQueryConfigId.providerQuerySqlQuery =

# LDAP base dn
# {valueType: "string", order: 4100, subSection: "dataProviderQueryConfig", required: true, regex: "^grouperDataProviderQuery\\.[^.]+\\.providerQueryLdapBaseDn$", showEl: "${providerQueryType == 'ldap'}"}
# grouperDataProviderQuery.dataProviderQueryConfigId.providerQueryLdapBaseDn =

# LDAP search scope
# {valueType: "string", order: 4200, subSection: "dataProviderQueryConfig", required: true, regex: "^grouperDataProviderQuery\\.[^.]+\\.providerQueryLdapSearchScope$", showEl: "${providerQueryType == 'ldap'}", formElement: "dropdown", optionValues: ['ONELEVEL_SCOPE', ' SUBTREE_SCOPE']}
# grouperDataProviderQuery.dataProviderQueryConfigId.providerQueryLdapSearchScope =

# LDAP filter
# {valueType: "string", order: 4300, subSection: "dataProviderQueryConfig", required: true, regex: "^grouperDataProviderQuery\\.[^.]+\\.providerQueryLdapFilter$", showEl: "${providerQueryType == 'ldap'}"}
# grouperDataProviderQuery.dataProviderQueryConfigId.providerQueryLdapFilter =

# Data structure
# {valueType: "string", order: 5000, subSection: "dataProviderQueryConfig", required: true, regex: "^grouperDataProviderQuery\\.[^.]+\\.providerQueryDataStructure$", formElement: "dropdown", optionValues: ["attribute", "row"], showEl: "${providerQueryType == 'sql'}"}
# grouperDataProviderQuery.dataProviderQueryConfigId.providerQueryDataStructure =

# Data row to link to
# {valueType: "string", order: 6000, subSection: "dataProviderQueryConfig", required: true, regex: "^grouperDataProviderQuery\\.[^.]+\\.providerQueryRowConfigId$", formElement: "dropdown", optionValuesFromClass: "edu.internet2.middleware.grouper.dataField.GrouperDataRow", showEl: "${providerQueryDataStructure == 'row'}"}
# grouperDataProviderQuery.dataProviderQueryConfigId.providerQueryRowConfigId =

# Attribute which links this data to subjects 
# {valueType: "string", order: 7000, subSection: "dataProviderQueryConfig", required: true, regex: "^grouperDataProviderQuery\\.[^.]+\\.providerQuerySubjectIdAttribute$"}
# grouperDataProviderQuery.dataProviderQueryConfigId.providerQuerySubjectIdAttribute = 

# Which type of subject id
# {valueType: "string", order: 8000, subSection: "dataProviderQueryConfig", regex: "^grouperDataProviderQuery\\.[^.]+\\.providerQuerySubjectIdType$", formElement: "dropdown", optionValues: ["subjectId", "subjectIdentifier"]}
# grouperDataProviderQuery.dataProviderQueryConfigId.providerQuerySubjectIdType = 

# which subject source this is a subject id for
# {valueType: "string", order: 9000, subSection: "dataProviderQueryConfig", regex: "^grouperDataProviderQuery\\.[^.]+\\.providerQuerySubjectSourceId$"}
# grouperDataProviderQuery.dataProviderQueryConfigId.providerQuerySubjectSourceId = 

# number of fields in this row
# {valueType: "string", order: 10000, subSection: "dataProviderQueryConfig", required: true, regex: "^dataProviderQueryConfigId\\.[^.]+\\.rowNumberOfDataFields$", formElement: "dropdown", optionValues: ["1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23", "24", "25", "26", "27", "28", "29", "30"]}
# grouperDataProviderQuery.dataProviderQueryConfigId.providerQueryNumberOfDataFields = 

# data field for this column
# {valueType: "string", order: 11000, showEl: "${providerQueryNumberOfDataFields > $i$}", repeatGroup: "providerQueryDataField", repeatCount: 30, required: true, regex: "^dataProviderQueryConfigId\\.[^.]+\\.providerQueryDataField\\.[0-9]+\\.providerDataFieldConfigId$", formElement: "dropdown", optionValuesFromClass: "edu.internet2.middleware.grouper.dataField.GrouperDataField"}
# grouperDataProviderQuery.dataProviderQueryConfigId.providerQueryDataField.$i$.providerDataFieldConfigId = 

# mapping type for this data field, e.g. could be translation eventually
# {valueType: "string", order: 12000, showEl: "${providerQueryNumberOfDataFields > $i$}", repeatGroup: "providerQueryDataField", repeatCount: 30, required: true, regex: "^dataProviderQueryConfigId\\.[^.]+\\.providerQueryDataField\\.[0-9]+\\.providerDataFieldMappingType$", formElement: "dropdown", optionValues: ["attribute"]}
# grouperDataProviderQuery.dataProviderQueryConfigId.providerQueryDataField.$i$.providerDataFieldMappingType = 

# mapping type for this data field
# {valueType: "string", order: 13000, showEl: "${providerQueryNumberOfDataFields > $i$}", repeatGroup: "providerQueryDataField", repeatCount: 30, required: true, regex: "^dataProviderQueryConfigId\\.[^.]+\\.providerQueryDataField\\.[0-9]+\\.providerDataFieldAttribute$", showEl: "${providerQueryDataField.$i$.providerDataFieldMappingType == 'attribute'}"}
# grouperDataProviderQuery.dataProviderQueryConfigId.providerQueryDataField.$i$.providerDataFieldAttribute = 

###########################################################################
## JEXL script testing
###########################################################################

# Users have to be sysadmins and member of this group to be able to run JEXL script tests
# {valueType: "group"}
jexlScriptTestingGroup = $$grouper.rootStemForBuiltinObjects$$:jexlScriptTestingGroup

# In order to have institution specific JEXL test example for an existing script type
# {valueType: "string"}
# jexlScriptTest.institutionExample.. = 

###########################################################################
## Box mock testing properties
###########################################################################

# box mock config id
# {valueType: "string"}
# grouperTest.box.mock.configId =

# box mock public key
# {valueType: "string"}
# grouperTest.box.mock.publicKey =

# box mock private key
# {valueType: "string"}
# grouperTest.box.mock.privateKey =

# box mock public key id
# {valueType: "string"}
# grouperTest.box.mock.publicKeyId =

###########################################################################
## Json serializing deserializing settings
###########################################################################
# use json lib when legacy is set to true. False means use jackson. Jackson is much faster.
# {valueType: "boolean"}
grouper.json.serialize.deserialize.useLegacy = false

# the legacy serialization would not throw an error if an invalid property is sent (when marhsaled to bean).  if there is an
# exception with the new way, log it once an hour and use the legacy
# {valueType: "boolean"}
grouper.json.serialize.deserialize.useLegacyOnError = true

# dont fill up logs, only log after this many millis, 1000*60*60
# {valueType: "integer"}
grouper.json.serialize.deserialize.parseErrorLogEveryMillis = 3600000

###########################################################################
## HTTP client settings
###########################################################################

# default pool size for an HTTP client.  i.e. this is the max number of connections outbound at once per container instance
# {valueType: "integer", defaultValue: "100"}
httpClientMaxTotalPoolSize = 

# default number of connections at once for an endpoint from a container
# {valueType: "integer", defaultValue: "30"}
httpClientDefaultMaxPerRoute = 

# if HTTP client instances should be re-used
# {valueType: "boolean", defaultValue: "true"}
httpClientReuse =