.middleware.grouper.grouper.5.12.2.source-code.grouper.hibernate.base.properties Maven / Gradle / Ivy

Go to download
Show more of this group Show more artifacts with this name
Show all versions of grouper Show documentation
Internet2 Groups Management Toolkit
There is a newer version: 5.13.5
#
# Copyright 2014 Internet2
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

#
# Grouper Hibernate Configuration
# $Id: grouper.hibernate.example.properties,v 1.9 2009-08-11 20:18:09 mchyzer Exp $
#


########################################
## Config chaining hierarchy
## The grouper hibernate config uses Grouper Configuration Overlays (documented on wiki)
## By default the configuration is read from grouper.hibernate.base.properties
## (which should not be edited), and the grouper.hibernate.properties overlays
## the base settings.  See the grouper.hibernate.base.properties for the possible
## settings that can be applied to the grouper.hibernate.properties
########################################

# comma separated config files that override each other (files on the right override the left)
# each should start with file: or classpath:
# e.g. classpath:grouper.hibernate.base.properties, file:c:/temp/myFile.properties
grouper.hibernate.config.hierarchy = classpath:grouper.hibernate.base.properties, classpath:grouper.hibernate.properties

# seconds between checking to see if the config files are updated
grouper.hibernate.config.secondsBetweenUpdateChecks = 60

########################################
## DB settings
########################################

# e.g. mysql:           jdbc:mysql://localhost:3306/grouper?useSSL=false
# e.g. p6spy (log sql): [use the URL that your DB requires]
# e.g. oracle:          jdbc:oracle:thin:@server.school.edu:1521:sid
# e.g. postgres (a):        jdbc:postgresql://localhost:5432/database
# e.g. postgres (b):        jdbc:postgresql://localhost:5432/database?currentSchema=mySchema

#hibernate.connection.url = jdbc:postgresql://localhost:5432/database?currentSchema=mySchema
hibernate.connection.url.elConfig = ${elUtils.processEnvVarOrFile('GROUPER_DATABASE_URL')}

#hibernate.connection.username         = sa
hibernate.connection.username.elConfig = ${elUtils.processEnvVarOrFile('GROUPER_DATABASE_USERNAME')}

# If you are using an empty password, depending upon your version of
# Java and Ant you may need to specify a password of "".
# Note: you can keep passwords external and encrypted: https://bugs.internet2.edu/jira/browse/GRP-122
#hibernate.connection.password         = 
hibernate.connection.password.elConfig = ${elUtils.processEnvVarOrFile('GROUPER_DATABASE_PASSWORD')}

################  BELOW HERE YOU GENERALLY DO NOT NEED TO CHANGE ####################

# Leave blank to autodetect based on URL, or specify
# Hibernate3.  
# e.g. org.hibernate.dialect.Oracle10gDialect
# e.g. org.hibernate.dialect.PostgreSQLDialect ,org.hibernate.dialect.MySQL5Dialect
hibernate.dialect               = 

# see http://ehcache.org/documentation/user-guide/hibernate#Configure-Ehcache-as-the-Second-Level-Cache-Provider
# Hibernate 3.0 - 3.2
# hibernate.cache.provider_class  = org.hibernate.cache.EhCacheProvider
# Hibernate 3.3+
# hibernate.cache.region.factory_class = net.sf.ehcache.hibernate.EhCacheRegionFactory
# Hibernate 4.0+
# hibernate.cache.region.factory_class = org.hibernate.cache.ehcache.EhCacheRegionFactory
hibernate.cache.region.factory_class = edu.internet2.middleware.grouper.cache.GrouperEhcacheRegionFactory

# number of seconds that database configs are cached
grouper.cache.database.configs.seconds = 120

#
# Generic Hibernate Configuration
#

hibernate.cache.use_query_cache       = true

# leave blank to autodetect based on URL
# e.g. mysql:           com.mysql.jdbc.Driver
# e.g. p6spy (log sql): com.p6spy.engine.spy.P6SpyDriver
#   for p6spy, put the underlying driver in spy.properties
# e.g. oracle:          oracle.jdbc.driver.OracleDriver
# e.g. postgres:        org.postgresql.Driver
hibernate.connection.driver_class = 


hibernate.connection.autocommit       = false

# Use c3p0 connection pooling (since dbcp not supported in hibernate anymore)
# http://www.hibernate.org/214.html, http://www.hibernate.org/hib_docs/reference/en/html/session-configuration.html
hibernate.c3p0.max_size.elConfig = ${elUtils.defaultIfBlank(elUtils.processEnvVarOrFile('GROUPER_DATABASE_CONNECTION_POOL_SIZE'), '500')}

hibernate.c3p0.min_size = 0
#seconds
hibernate.c3p0.timeout = 100
hibernate.c3p0.max_statements = 0
hibernate.c3p0.idle_test_period = 100
hibernate.c3p0.acquire_increment = 1
hibernate.c3p0.validate = false

#What to do if there are connection problems - see http://www.mchange.com/projects/c3p0/index.html#configuration_properties
#These settings are designed to cause exceptions sooner rather than later so end users are not left with a hanging UI. Once the database
#is available again a connection will be made witout further intervention
#If tou get intermittent connection problems in the UI even though the database is OK try increasing the max_size setting above and
#tune the settings below
hibernate.c3p0.acquireRetryAttempts=5
hibernate.c3p0.acquireRetryDelay=2000
hibernate.c3p0.checkoutTimeout=180000

#hibernate.c3p0.debugUnreturnedConnectionStackTraces = false
# in seconds, if connections are removed from the pool for longer than this, 
# and debugUnreturnedConnectionStackTraces is true, then log the stack of who took the connection (and didnt return it)
#hibernate.c3p0.unreturnedConnectionTimeout = 30

hibernate.jdbc.use_streams_for_binary = true

hibernate.max_fetch_depth             = 1

hibernate.show_sql                    = false

hibernate.jdbc.batch_size = 200

hibernate.connection.isolation = 2

hibernate.jdbc.fetch_size = 1000

hibernate.allow_update_outside_transaction = true


# This defaults to true.  Turn this off if the database does not support or need or has a problem with quoted identifiers
# grouperMainDbConnection.useQuotedColumnsInSql =

# Quote to use for columns in SQL.  This defaults to backtic if mysql, and otherwise will be doublequote.
# grouperMainDbConnection.quoteForColumnsInSql =


#######################################
## Initialization settings
#######################################

# what version should we auto install DDL up to.  You should put the major and minor version here (e.g. 2.6.*).  Or you could go to a build number if you like, 
# or nothing to not auto DDL.  e.g. 5.0.32     or     5.0.*   or   5.*.*
# {valueType: "string"}
registry.auto.ddl.upToVersion.elConfig = ${elUtils.processEnvVarOrFile('GROUPER_AUTO_DDL_UPTOVERSION')}

# if you are consciously not doing auto-ddl, set this to true
# {valueType: "boolean", required: true}
registry.auto.ddl.dontRemindMeAboutUpToVersion = false

# its ok if a WS is a little behind on DDL as the UI.  If the major and minor version are the same then its not considered a mismatch
# {valueType: "boolean", required: true}
registry.auto.ddl.okIfSameMajorAndMinorVersion = true

# if should ignore ddl checks at startup
# {valueType: "boolean", required: true}
registry.auto.ddl.ignoreAtStartup = false

# if an exception should be throw on morph errors when grouper starts up
grouper.ignoreMorphErrorsOnStartup = false

# if Grouper should delay at startup, e.g. to wait for a database to start
# {valueType: "integer", defaultValue: "0"}
grouper.start.delay.seconds.elConfig = ${elUtils.processEnvVarOrFile('GROUPER_START_DELAY_SECONDS')}

# if config metadata should be cached, default true, set to false if developing
# {valueType: "boolean", defaultValue: "true"}
configuration.cacheJsonMetadata = true

#######################################
## The UI servlet will be loaded so that the UI can be run in Tomcat
#######################################
grouper.is.ui.elConfig = ${elUtils.processEnvVarOrFile('GROUPER_UI')}

# The WS servlet will be loaded so that the WS can be run in Tomcat
grouper.is.ws.elConfig = ${elUtils.processEnvVarOrFile('GROUPER_WS')}

# The WS Axis servlet will be loaded so that WS/SOAP can be run in Tomcat.  Must have dependencies in classpath.  Only applicable if grouper.is.ws is true as well.
grouper.is.ws.soap.elConfig = ${elUtils.processEnvVarOrFile('GROUPER_WS_SOAP')}

# The SCIM servlet will be loaded so that the SCIM can be run in Tomcat
grouper.is.scim.elConfig = ${elUtils.processEnvVarOrFile('GROUPER_SCIM')}

# The daemon thread will be started in Tomcat
grouper.is.daemon.elConfig = ${elUtils.processEnvVarOrFile('GROUPER_DAEMON')}

# if grouper should how mock services to test provisioning
grouper.is.mockServices.elConfig = ${elUtils.processEnvVarOrFile('GROUPER_MOCK_SERVICES')}

# UI basic auth is for quick start. Set to false when you migrate to shib or something else
grouper.is.ui.basicAuthn.elConfig= ${elUtils.processEnvVarOrFile('GROUPER_UI_GROUPER_AUTH')}

# WS basic auth is usually for a quick start. Set to false if you migrate to ldap or kerberos or something else
grouper.is.ws.basicAuthn.elConfig= ${elUtils.processEnvVarOrFile('GROUPER_WS_GROUPER_AUTH')}

# SCIM basic auth is usually for a quick start. Set to false if you migrate to ldap or kerberos or something else
grouper.is.scim.basicAuthn.elConfig= ${elUtils.processEnvVarOrFile('GROUPER_SCIM_GROUPER_AUTH')}

# override a grouper authn password here for testing and development
# grouperPasswordConfigOverride__subjectId_pass = pass (hopefully encrypted but doesnt need to)
# e.g. grouperPasswordConfigOverride_UI_GrouperSystem_pass = abnf234