uter-project.scouter-agent-host.2.20.0.source-code.oshi.properties Maven / Gradle / Ivy
The newest version!
# This properties file is automatically loaded at startup of the GlobalConfig
# class. The defaults below may be overwritten by either replacing this file
# with your own equivalent file on the class path, or programmatically using
# GlobalConfig.set(, );
#
# The property names are included as constants in the GlobalConfig class for
# convenience.
# Some containers enable alternate locations for the Linux /proc filesystem
# to provide container-level output in preference to system-level output.
# The /proc filesystem location
oshi.util.proc.path=/proc
# The WMI query timeout in milliseconds
# Default is -1, no timeout
oshi.util.wmi.timeout=-1
# Whether to perform WMI queries for command lines in a batch for all running
# processes. Individual WMI queries for the command line take about 50ms while
# querying the entire process list takes about 200ms. If you regularly expect
# to query command lines for more than a few processes this should be enabled
# for better performance. If you only rarely query command lines, leaving this
# disabled will be faster and conserve some resources. Defaults to false.
oshi.os.windows.commandline.batch=false
# Whether to update the OSProcess state on Windows to SUSPENDED if all its
# threads are suspended. This requires querying thread states and can impact
# performance (Process list queries can take much longer) but if desired is
# better done once than for each process. Users may still determine this value
# themselves by querying thread details, but this method is extremely slow if
# done for every process. Enabling this will provide a more efficient (but
# still slow) update if this information is of value. Defaults to false.
oshi.os.windows.procstate.suspended=false
# Whether to use "Processor Utility" for System and per-processor CPU Load ticks
# (on Windows 8 and higher) to match CPU usage with the Windows Task Manager.
#
# Windows Task Manager displays a measure of Processor Utility, which is an
# amount of work completed by the processor compared to the processor running
# full time at nominal frequency. Because of features which change CPU frequency
# such as Intel Speed Step, Intel Turbo Boost, AMD Precision Boost, and others,
# it is possible for this value to exceed 100% (although Task Manager caps it
# at 100%).
#
# By default, OSHI uses "Processor Time" which measures active and idle times
# for each processor. CPU load is active time divided by total time. This matches
# the interpretation of Unix-based systems, the Task Manager for Windows 7 and
# earlier, The Task Manager "Details" tab for Process CPU usage (and OSHI's
# per-process CPU usage), and Windows Sysinternals Process Explorer.
#
# Setting this value to true will allow OSHI's CPU Load values to match the
# Windows Task manager output (except that OSHI's numbers will not be capped
# at 100%) and will measure "work completed" rather than "processor time not idle".
# In the case load exceeds 100%, it is possible for "idle" ticks to decrease,
# i.e., the change between ticks would result in "negative idle time".
#
# For this calculation to produce meaningful data, the ticks used to calculate
# usage must have come from the same instance of CentralProcessor. Also, the first
# polling interval must be less than 7 minutes to properly initialize values.
oshi.os.windows.cpu.utility=false
# Whether to attempt to fetch Windows performance counter data for processes
# and threads from HKEY_PERFORMANCE_DATA in the registry. Windows docs say
# to use the PDH API in preference to this, but the multiple native calls
# with JNA result in slower performance than a one-time grab of the data
# from the registry. Unfortunately, registry calls are more subject to
# problems with registry corruption, counter deletion when changing language
# settings, and other factors. Although the code will recover from failure
# to read these counters from the registry, it may be preferable to disable
# this attempt if failure is known/expected. Setting this property to false
# will skip the registry check and use the API-recommended (but slower)
# performance counter API (or WMI as a backup).
oshi.os.windows.hkeyperfdata=true
# Whether to start a daemon thread to provide Load Averages for Windows.
# Load Average is a metric on Linux, macOS, and Unix operating systems that
# provides the average number of processes running or waiting for CPU (on
# Linux, the metric includes processes waiting for other resources such as
# disks.) While Windows does not provide this metric, the Processor Queue
# Length performance counter added to the average recent processor usage
# provides a similar metric.
#
# If this property is set true, a daemon thread will be started which will
# calculate an equivalent metric to Unix load average.
oshi.os.windows.loadaverage=false
# Whether a class of performance counters is disabled. It is possible to
# disable performance counters by changing registry values, which can improve
# overall OS performance (such as for gaming) if the counters aren't desired.
#
# When attempting to query counters, OSHI provides a (one time) log warning
# for the performance counter itself and a (each time) COM exception if the
# WMI table backing up the counter fails. The associated log messages can be
# confusing to users or developers of applications which depend on OSHI.
#
# If counters are either intentionally disabled, or the application depending
# on OSHI does not require any of the relevant performance counters, setting
# these values to true will skip querying these counters and return 0 values
# for the associated metrics. No log messages will be generated.
#
# If these values are not set at all, OSHI will query the registry to determine
# whether they are disabled and warn users if this is the case (this is the default).
# The associated Windows registry keys are at:
# HKLM\SYSTEM\CurrentControlSet\Services\PerfOS\Performance\Disable Performance Counters
# HKLM\SYSTEM\CurrentControlSet\Services\PerfProc\Performance\Disable Performance Counters
# HKLM\SYSTEM\CurrentControlSet\Services\PerfDisk\Performance\Disable Performance Counters
# where a value of 0 is not disabled and any other value disables counters.
#
# PerfOS counters used for CPU ticks, swap file usage, page swaps, context switches, interrupts
oshi.os.windows.perfos.disabled=
#
# PerfProc counters used for process and thread priority, time, IO, memory usage
# (also see config for oshi.os.windows.hkeyperfdata)
oshi.os.windows.perfproc.disabled=
#
# PerfDisk counters used for HWDiskStore reads/writes/queue length/xfer time
oshi.os.windows.perfdisk.disabled=
# On Linux, most process metrics are read from the proc pseudo-filesystem.
# On macOS, process environment is read via sysctl
# When operating without elevated permissions, this results in frequent error
# messages for failures to read the process environment files. Set this to true
# to receive these warnings.
oshi.os.linux.procfs.logwarning=false
oshi.os.mac.sysctl.logwarning=false
# On macOS, Linux, and Unix systems, the default getSessions() method on the
# OperatingSystem interface uses native code (see {@code man getutxent}) that
# is not thread safe. OSHI's use of this code is synchronized and may be used
# in a multi-threaded environment without introducing any additional conflicts.
# Users should note, however, that other operating system code may access the
# same native code.
#
# The oshi.driver.unix.Who#queryWho() method produces similar output parsing
# the output of the Posix-standard "who" command, and may internally employ
# reentrant code on some platforms. Setting this configuration to true will
# use the command-line variant. Defaults to false.
oshi.os.unix.whoCommand=false
# The name of the System event log containing bootup event IDs 12 and 6005.
#
# This is used for a one-time calculation of system boot time that should be
# consistent across process runs regardless of sleep/hibernate cycles, at
# the small cost of ~250ms latency reading upon WindowsOperatingSystem
# initialization.
#
# If the specified log is the empty string, or doesn't contain a bootup event,
# boot time will be calculated by subtracting up time from current time. This
# may vary by up to a millisecond between program executions and does not
# properly account for sleep/hibernate cycles, but when using the empty string
# is fast and may be preferred if only approximate boot time is desired.
#
# If a non-empty invalid log name is specified, the name "Application" will
# be used. The default is System
oshi.os.windows.eventlog=System
# Memoizer default expiration in milliseconds (return values will be cached this long)
# Must be positive (negative value will never refresh)
# Should be less than 1 second
# Default is 300 milliseconds
oshi.util.memoizer.expiration=300
# FileSystem types which are network-based and should be excluded from local-only lists
oshi.network.filesystem.types=afs,cifs,smbfs,sshfs,ncpfs,ncp,nfs,nfs4,gfs,gds2,glusterfs
# Linux defines a set of virtual file systems
# "anon_inodefs", anonymous inodes - inodes without filenames
# "autofs", automounter file system, used by Linux, Solaris, FreeBSD
# "bdev", keep track of block_device vs major/minor mapping
# "binfmt_misc", Binary format support file system
# "bpf", Virtual filesystem for Berkeley Paket Filter
# "cgroup", Cgroup file system
# "cgroup2", Cgroup file system
# "configfs", Config file system
# "cpuset", pseudo-filesystem interface to the kernel cpuset mechanism
# "dax", Direct Access (DAX) can be used on memory-backed block devices
# "debugfs", Debug file system
# "devpts", Dev pseudo terminal devices file system
# "devtmpfs", Dev temporary file system
# "drm", Direct Rendering Manager
# "ecryptfs", POSIX-compliant enterprise cryptographic filesystem for Linux
# "efivarfs", (U)EFI variable filesystem
# "fuse", //
# NOTE: FUSE's fuseblk is not evalued because used as file system
# representation of a FUSE block storage
# "fuseblk" FUSE block file system
# "fusectl", FUSE control file system
# "hugetlbfs", Huge pages support file system
# "inotifyfs", support inotify
# "mqueue", Message queue file system
# "nfsd", NFS file system
# "overlay", Overlay file system https://wiki.archlinux.org/index.php/Overlay_filesystem
# "pipefs", for pipes but only visible inside kernel
# "proc", Proc file system, used by Linux and Solaris
# "pstore", Pstore file system
# "ramfs", Old filesystem used for RAM disks
# "rootfs", Minimal fs to support kernel boot
# "rpc_pipefs", Sun RPC file system
# "securityfs", Kernel security file system
# "selinuxfs", SELinux file system
# "sunrpc", Sun RPC file system
# "sysfs", SysFS file system
# "systemd-1", Systemd file system
# "tmpfs", Temporary file system
# NOTE: tmpfs is evaluated apart, because Linux, Solaris, FreeBSD use it for
# RAMdisks
# "tracefs", thin stackable file system for capturing file system traces
# "usbfs", removed in linux 3.5 but still seen in some systems
# FreeBSD / Solaris defines a set of virtual file systems
# "procfs", Proc file system
# "devfs", Dev temporary file system
# "ctfs", Contract file system
# "fdescfs", fd
# "objfs", Object file system
# "mntfs", Mount file system
# "sharefs", Share file system
# "lofs" Library file system
# "SquashFS" read-only filesystem used by snap on eg. Ubuntu
oshi.pseudo.filesystem.types=anon_inodefs,autofs,bdev,binfmt_misc,bpf,cgroup,cgroup2,configfs,cpuset,dax,debugfs,devpts,devtmpfs,drm,ecryptfs,efivarfs,fuse,fusectl,hugetlbfs,inotifyfs,mqueue,nfsd,overlay,proc,procfs,pstore,rootfs,rpc_pipefs,securityfs,selinuxfs,sunrpc,sysfs,systemd-1,tracefs,usbfs,procfs,devfs,ctfs,fdescfs,objfs,mntfs,sharefs,lofs,squashfs
# Paths and volumes to exclude from FileSystem listings on these operating systems.
# These are excluded if they match using PathMatcher syntax. See
# https://docs.oracle.com/javase/7/docs/api/java/nio/file/FileSystem.html#getPathMatcher(java.lang.String)
# The "glob:" syntax is automatically added unless another syntax (regex:) is specified.
# Similar syntax may be used for "includes" which take precedence over excludes.
# Note: glob:* mathches all paths not starting with /
oshi.os.aix.filesystem.path.excludes=/run**,/sys**,/dev,/proc**,*
oshi.os.aix.filesystem.volume.excludes=/proc
oshi.os.freebsd.filesystem.path.excludes=/system**,/tmp**,/dev,/dev/fd**
oshi.os.freebsd.filesystem.volume.excludes=rpool*
oshi.os.linux.filesystem.path.excludes=/run**,/sys**,/proc**,/dev,**/shm
oshi.os.mac.filesystem.volume.excludes=devfs,map *
oshi.os.openbsd.filesystem.path.excludes=/tmp**,/dev
oshi.os.solaris.filesystem.path.excludes=/system**,/tmp**,/dev,/dev/fd**
oshi.os.solaris.filesystem.volume.excludes=rpool