is2.axis2-kernel.1.5.4.source-code.axis2.xml Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of axis2-kernel Show documentation
Show all versions of axis2-kernel Show documentation
Core Parts of Axis2. This includes Axis2 engine, Client API, Addressing support, etc.,
<!--
~ Licensed to the Apache Software Foundation (ASF) under one
~ or more contributor license agreements. See the NOTICE file
~ distributed with this work for additional information
~ regarding copyright ownership. The ASF licenses this file
~ to you under the Apache License, Version 2.0 (the
~ "License"); you may not use this file except in compliance
~ with the License. You may obtain a copy of the License at
~
~ http://www.apache.org/licenses/LICENSE-2.0
~
~ Unless required by applicable law or agreed to in writing,
~ software distributed under the License is distributed on an
~ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
~ KIND, either express or implied. See the License for the
~ specific language governing permissions and limitations
~ under the License.
-->
<axisconfig name="AxisJava2.0">
<!-- ================================================= -->
<!-- Parameters -->
<!-- ================================================= -->
<parameter name="hotdeployment">true</parameter>
<parameter name="hotupdate">false</parameter>
<parameter name="enableMTOM">false</parameter>
<parameter name="enableSwA">false</parameter>
<!--Uncomment if you want to enable file caching for attachments -->
<!--parameter name="cacheAttachments">true</parameter>
<parameter name="attachmentDIR"></parameter>
<parameter name="sizeThreshold">4000</parameter-->
<!--Uncomment if you want to plugin your own attachments lifecycle implementation -->
<!--<attachmentsLifecycleManager class="org.apache.axiom.attachments.lifecycle.impl.LifecycleManagerImpl"/>-->
<!--Uncomment if you want to enable the reduction of the in-memory cache of WSDL definitions -->
<!--In some server environments, the available memory heap is limited and can fill up under load -->
<!--Since in-memory copies of WSDL definitions can be large, some steps can be taken-->
<!--to reduce the memory needed for the cached WSDL definitions. -->
<!--parameter name="reduceWSDLMemoryCache">true</parameter-->
<!--This will give out the timout of the configuration contexts, in milliseconds-->
<parameter name="ConfigContextTimeoutInterval">30000</parameter>
<!--During a fault, stack trace can be sent with the fault message. The following flag will control -->
<!--that behavior.-->
<parameter name="sendStacktraceDetailsWithFaults">false</parameter>
<!--If there aren't any information available to find out the fault reason, we set the message of the exception-->
<!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
<!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
<!--is set, then Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
<parameter name="DrillDownToRootCauseForFaultReason">false</parameter>
<parameter name="userName">admin</parameter>
<parameter name="password">axis2</parameter>
<!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.-->
<!--ServicesDirectory only works on the following cases-->
<!---File based configurator and in that case the value should be a file URL (http:// not allowed)-->
<!---When creating URL Based configurator with URL file:// -->
<!--- War based configurator with expanded case , -->
<!--All the other scenarios it will be ignored.-->
<!--<parameter name="ServicesDirectory">service</parameter>-->
<!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path-->
<!--<parameter name="ModulesDirectory">modules</parameter>-->
<!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
<!--root which can configured using the following contextRoot parameter-->
<!--<parameter name="contextRoot">axis2</parameter>-->
<!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguiush those endpoints-->
<!--In case of a servlet, if you change this you have to manually change the settings of your servlet container to map this -->
<!--context path to proper Axis2 servlets-->
<!--<parameter name="servicePath">services</parameter>-->
<!--<parameter name="restPath">rest</parameter>-->
<!-- Following parameter will completely disable REST handling in Axis2-->
<parameter name="disableREST" locked="false">false</parameter>
<!-- Following parameter will suppress generation of SOAP 1.2 bindings in auto-generated WSDL files -->
<parameter name="disableSOAP12" locked="true">false</parameter>
<!--POJO deployer , this will alow users to drop .class file and make that into a service-->
<deployer extension=".class" directory="pojo" class="org.apache.axis2.deployment.POJODeployer"/>
<deployer extension=".jar" directory="servicejars"
class="org.apache.axis2.jaxws.framework.JAXWSDeployer"/>
<deployer extension=".jar" directory="transports"
class="org.apache.axis2.deployment.TransportDeployer"/>
<!--CORBA deployer , this will alow users to invoke remote CORBA services through Axis2-->
<!--<deployer extension=".xml" directory="corba" class="org.apache.axis2.corba.deployer.CorbaDeployer"/>-->
<!--<deployer extension=".jsa" directory="rmiservices" class="org.apache.axis2.rmi.deploy.RMIServiceDeployer"/>-->
<!-- Following parameter will set the host name for the epr-->
<!--<parameter name="hostname" locked="true">myhost.com</parameter>-->
<!-- If you have a front end host which exposes this webservice using a different public URL -->
<!-- use this parameter to override autodetected url -->
<!--<parameter name="httpFrontendHostUrl">https://someotherhost/context</parameter>-->
<!-- The way of adding listener to the system-->
<!-- <listener class="org.apache.axis2.ObserverIMPL">-->
<!-- <parameter name="RSS_URL">http://127.0.0.1/rss</parameter>-->
<!-- </listener>-->
<threadContextMigrators>
<threadContextMigrator listId="JAXWS-ThreadContextMigrator-List"
class="org.apache.axis2.jaxws.addressing.migrator.EndpointContextMapMigrator"/>
</threadContextMigrators>
<!-- ================================================= -->
<!-- Message Receivers -->
<!-- ================================================= -->
<!--This is the default MessageReceiver for the system , if you want to have MessageReceivers for -->
<!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
<!--any operation -->
<!--Note : You can override this for a particular service by adding the same element with your requirement-->
<messageReceivers>
<messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
<messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
<messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-only"
class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
<messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-out"
class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
<messageReceiver mep="http://www.w3.org/ns/wsdl/in-only"
class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
<messageReceiver mep="http://www.w3.org/ns/wsdl/in-out"
class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
</messageReceivers>
<!-- ================================================= -->
<!-- Message Formatter -->
<!-- ================================================= -->
<!--Following content type to message formatter mapping can be used to implement support for different message -->
<!--format serialization in Axis2. These message formats are expected to be resolved based on the content type. -->
<messageFormatters>
<messageFormatter contentType="application/x-www-form-urlencoded"
class="org.apache.axis2.transport.http.XFormURLEncodedFormatter"/>
<messageFormatter contentType="multipart/form-data"
class="org.apache.axis2.transport.http.MultipartFormDataFormatter"/>
<messageFormatter contentType="application/xml"
class="org.apache.axis2.transport.http.ApplicationXMLFormatter"/>
<messageFormatter contentType="text/xml"
class="org.apache.axis2.transport.http.SOAPMessageFormatter"/>
<messageFormatter contentType="application/soap+xml"
class="org.apache.axis2.transport.http.SOAPMessageFormatter"/>
</messageFormatters>
<!-- ================================================= -->
<!-- Message Builders -->
<!-- ================================================= -->
<!--Following content type to builder mapping can be used to implement support for different message -->
<!--formats in Axis2. These message formats are expected to be resolved based on the content type. -->
<messageBuilders>
<messageBuilder contentType="application/xml"
class="org.apache.axis2.builder.ApplicationXMLBuilder"/>
<messageBuilder contentType="application/x-www-form-urlencoded"
class="org.apache.axis2.builder.XFormURLEncodedBuilder"/>
<messageBuilder contentType="multipart/form-data"
class="org.apache.axis2.builder.MultipartFormDataBuilder"/>
</messageBuilders>
<!-- ================================================= -->
<!-- Transport Ins -->
<!-- ================================================= -->
<transportReceiver name="http"
class="org.apache.axis2.transport.http.SimpleHTTPServer">
<parameter name="port">8080</parameter>
<!-- Here is the complete list of supported parameters (see example settings further below):
port: the port to listen on (default 6060)
hostname: if non-null, url prefix used in reply-to endpoint references (default null)
originServer: value of http Server header in outgoing messages (default "Simple-Server/1.1")
requestTimeout: value in millis of time that requests can wait for data (default 20000)
requestTcpNoDelay: true to maximize performance and minimize latency (default true)
false to minimize bandwidth consumption by combining segments
requestCoreThreadPoolSize: number of threads available for request processing (unless queue fills up) (default 25)
requestMaxThreadPoolSize: number of threads available for request processing if queue fills up (default 150)
note that default queue never fills up: see HttpFactory
threadKeepAliveTime: time to keep threads in excess of core size alive while inactive (default 180)
note that no such threads can exist with default unbounded request queue
threadKeepAliveTimeUnit: TimeUnit of value in threadKeepAliveTime (default SECONDS) (default SECONDS)
-->
<!-- <parameter name="hostname">http://www.myApp.com/ws</parameter> -->
<!-- <parameter name="originServer">My-Server/1.1</parameter> -->
<!-- <parameter name="requestTimeout">10000</parameter> -->
<!-- <parameter name="requestTcpNoDelay">false</parameter> -->
<!-- <parameter name="requestCoreThreadPoolSize">50</parameter> -->
<!-- <parameter name="requestMaxThreadPoolSize">100</parameter> -->
<!-- <parameter name="threadKeepAliveTime">240000</parameter> -->
<!-- <parameter name="threadKeepAliveTimeUnit">MILLISECONDS</parameter> -->
</transportReceiver>
<!--Uncomment if you want to have TCP transport support-->
<!--transportReceiver name="tcp"
class="org.apache.axis2.transport.tcp.TCPServer">
<parameter name="port">6060</parameter-->>
<!--If you want to give your own host address for EPR generation-->
<!--uncomment the following paramter , and set it as you required.-->
<!--<parameter name="hostname">tcp://myApp.com/ws</parameter>-->
<!-- /transportReceiver -->
<!-- ================================================= -->
<!-- Transport Outs -->
<!-- ================================================= -->
<!--Uncomment if you want to have TCP transport support-->
<!--
<transportSender name="tcp"
class="org.apache.axis2.transport.tcp.TCPTransportSender"/>
-->
<transportSender name="local"
class="org.apache.axis2.transport.local.LocalTransportSender"/>
<transportSender name="http"
class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
<parameter name="PROTOCOL">HTTP/1.1</parameter>
<parameter name="Transfer-Encoding">chunked</parameter>
<!-- If following is set to 'true', optional action part of the Content-Type will not be added to the SOAP 1.2 messages -->
<!-- <parameter name="OmitSOAP12Action">true</parameter> -->
</transportSender>
<transportSender name="https"
class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
<parameter name="PROTOCOL">HTTP/1.1</parameter>
<parameter name="Transfer-Encoding">chunked</parameter>
</transportSender>
<!-- Please enable this if you need the java transport -->
<!-- <transportSender name="java"
class="org.apache.axis2.transport.java.JavaTransportSender"/> -->
<!-- ================================================= -->
<!-- Global Modules -->
<!-- ================================================= -->
<!-- Comment this to disable Addressing -->
<module ref="addressing"/>
<!--Configuring module , providing parameters for modules whether they refer or not-->
<!--<moduleConfig name="addressing">-->
<!--<parameter name="addressingPara">N/A</parameter>-->
<!--</moduleConfig>-->
<!-- ================================================= -->
<!-- Clustering -->
<!-- ================================================= -->
<!--
To enable clustering for this node, set the value of "enable" attribute of the "cluster"
element to "true". The initilization of a node in the cluster is handled by the class
corresponding to the "class" attribute of the "cluster" element. It is also responsible for
getting this node to join the cluster.
-->
<cluster class="org.apache.axis2.clustering.tribes.TribesClusterManager" enable="false">
<!--
This parameter indicates whther the cluster has to be automatically initalized
when the AxisConfiguration is built. If set to "true" the initialization will not be
done at that stage, and some other party will have to explictly initialize the cluster.
-->
<parameter name="AvoidInitiation">true</parameter>
<!--
Indicates whether this member is active or not. This will be useful in a setup where
members are deployed in ACTIVE and/or PASSIVE configuration
-->
<parameter name="isActive">true</parameter>
<!--
An implementation of org.apache.axis2.clustering.MembershipListener
which will be called on membership changes
-->
<!--
<parameter name="membershipListener">
<class>org.apache.axis2.clustering.MembershipListenerImpl</class>
<properties>
<property name="foo">bar</property>
</properties>
</parameter>
-->
<!--
The membership scheme used in this setup. The only values supported at the moment are
"multicast" and "wka"
1. multicast - membership is automatically discovered using multicasting
2. wka - Well-Known Address based multicasting. Membership is discovered with the help
of one or more nodes running at a Well-Known Address. New members joining a
cluster will first connect to a well-known node, register with the well-known node
and get the membership list from it. When new members join, one of the well-known
nodes will notify the others in the group. When a member leaves the cluster or
is deemed to have left the cluster, it will be detected by the Group Membership
Service (GMS) using a TCP ping mechanism.
-->
<parameter name="membershipScheme">multicast</parameter>
<!--
The clustering domain/group. Nodes in the same group will belong to the same multicast
domain. There will not be interference between nodes in different groups.
-->
<parameter name="domain">apache.axis2.domain</parameter>
<!--
This parameter is only valid when the "mode" parameter is set to application. This indicates
the domain in which the the applications being load balanced are deployed.
-->
<parameter name="applicationDomain">apache.axis2.application.domain</parameter>
<!--
When a Web service request is received, and processed, before the response is sent to the
client, should we update the states of all members in the cluster? If the value of
this parameter is set to "true", the response to the client will be sent only after
all the members have been updated. Obviously, this can be time consuming. In some cases,
such this overhead may not be acceptable, in which case the value of this parameter
should be set to "false"
-->
<parameter name="synchronizeAll">true</parameter>
<!--
The maximum number of times we need to retry to send a message to a particular node
before giving up and considering that node to be faulty
-->
<parameter name="maxRetries">10</parameter>
<!-- The multicast address to be used -->
<parameter name="mcastAddress">228.0.0.4</parameter>
<!-- The multicast port to be used -->
<parameter name="mcastPort">45564</parameter>
<!-- The frequency of sending membership multicast messages (in ms) -->
<parameter name="mcastFrequency">500</parameter>
<!-- The time interval within which if a member does not respond, the member will be
deemed to have left the group (in ms)
-->
<parameter name="memberDropTime">3000</parameter>
<!--
The IP address of the network interface to which the multicasting has to be bound to.
Multicasting would be done using this interface.
-->
<parameter name="mcastBindAddress">127.0.0.1</parameter>
<!-- The host name or IP address of this member -->
<parameter name="localMemberHost">127.0.0.1</parameter>
<!--
The TCP port used by this member. This is the port through which other nodes will
contact this member
-->
<parameter name="localMemberPort">4000</parameter>
<!--
Preserve message ordering. This will be done according to sender order.
-->
<parameter name="preserveMessageOrder">true</parameter>
<!--
Maintain atmost-once message processing semantics
-->
<parameter name="atmostOnceMessageSemantics">true</parameter>
<!--
The list of static or well-known members. These entries will only be valid if the
"membershipScheme" above is set to "wka"
-->
<members>
<member>
<hostName>127.0.0.1</hostName>
<port>4000</port>
</member>
<member>
<hostName>127.0.0.1</hostName>
<port>4001</port>
</member>
</members>
<!--
Enable the load balancer entry if you need to run this node as a load balancer.
Multiple application domains with different LoadBalanceEventHandler implementations
can be defined in this section.
-->
<loadBalancer enable="false">
<applicationDomain name="apache.axis2.application.domain"
handler="org.apache.axis2.clustering.DefaultLoadBalanceEventHandler"/>
</loadBalancer>
<!--
This interface is responsible for handling configuration management.
Configuraion changes include:
1. Rebooting an entire cluster, in which case, all nodes have to load the new
Axis2 configuration in a consistent manner
2. Deploying a new service to a cluster or undeploying a service from a cluster
3. Changing the policies of a service deployed on the cluster
The "enable" attribute indicates whether Configuration management has been enabled
-->
<configurationManager
class="org.apache.axis2.clustering.configuration.DefaultConfigurationManager"
enable="true">
<listener
class="org.apache.axis2.clustering.configuration.DefaultConfigurationManagerListener"/>
</configurationManager>
<!--
This interface is responsible for handling context replication. The property changes in
the Axis2 context hierarchy in this node, are propagated to all other nodes in the cluster.
The "excludes" patterns can be used to specify the prefixes (e.g. local_*) or
suffixes (e.g. *_local) of the properties to be excluded from replication. The pattern
"*" indicates that all properties in a particular context should not be replicated.
The "enable" attribute indicates whether context replication has been enabled
-->
<contextManager class="org.apache.axis2.clustering.context.DefaultContextManager"
enable="true">
<listener class="org.apache.axis2.clustering.context.DefaultContextManagerListener"/>
<replication>
<defaults>
<exclude name="local_*"/>
<exclude name="LOCAL_*"/>
</defaults>
<context class="org.apache.axis2.context.ConfigurationContext">
<exclude name="UseAsyncOperations"/>
<exclude name="SequencePropertyBeanMap"/>
</context>
<context class="org.apache.axis2.context.ServiceGroupContext">
<exclude name="my.sandesha.*"/>
</context>
<context class="org.apache.axis2.context.ServiceContext">
<exclude name="my.sandesha.*"/>
</context>
</replication>
</contextManager>
</cluster>
<!-- ================================================= -->
<!-- Phases -->
<!-- ================================================= -->
<phaseOrder type="InFlow">
<!-- System predefined phases -->
<phase name="Transport">
<handler name="RequestURIBasedDispatcher"
class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher">
<order phase="Transport"/>
</handler>
<handler name="SOAPActionBasedDispatcher"
class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher">
<order phase="Transport"/>
</handler>
</phase>
<phase name="Addressing">
<handler name="AddressingBasedDispatcher"
class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
<order phase="Addressing"/>
</handler>
</phase>
<phase name="Security"/>
<phase name="PreDispatch"/>
<phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
<handler name="RequestURIBasedDispatcher"
class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/>
<handler name="SOAPActionBasedDispatcher"
class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/>
<handler name="RequestURIOperationDispatcher"
class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/>
<handler name="SOAPMessageBodyBasedDispatcher"
class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/>
<handler name="HTTPLocationBasedDispatcher"
class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/>
<handler name="GenericProviderDispatcher"
class="org.apache.axis2.jaxws.dispatchers.GenericProviderDispatcher"/>
<handler name="MustUnderstandValidationDispatcher"
class="org.apache.axis2.jaxws.dispatchers.MustUnderstandValidationDispatcher"/>
</phase>
<phase name="RMPhase"/>
<!-- System predefined phases -->
<!-- After Postdispatch phase module author or service author can add any phase he want -->
<phase name="OperationInPhase">
<handler name="MustUnderstandChecker"
class="org.apache.axis2.jaxws.dispatchers.MustUnderstandChecker">
<order phase="OperationInPhase"/>
</handler>
</phase>
<phase name="soapmonitorPhase"/>
</phaseOrder>
<phaseOrder type="OutFlow">
<!-- user can add his own phases to this area -->
<phase name="soapmonitorPhase"/>
<phase name="OperationOutPhase"/>
<!--system predefined phase-->
<!--these phase will run irrespective of the service-->
<phase name="RMPhase"/>
<phase name="PolicyDetermination"/>
<phase name="MessageOut"/>
<phase name="Security"/>
</phaseOrder>
<phaseOrder type="InFaultFlow">
<phase name="Addressing">
<handler name="AddressingBasedDispatcher"
class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
<order phase="Addressing"/>
</handler>
</phase>
<phase name="Security"/>
<phase name="PreDispatch"/>
<phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
<handler name="RequestURIBasedDispatcher"
class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/>
<handler name="SOAPActionBasedDispatcher"
class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/>
<handler name="RequestURIOperationDispatcher"
class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/>
<handler name="SOAPMessageBodyBasedDispatcher"
class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/>
<handler name="HTTPLocationBasedDispatcher"
class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/>
<handler name="GenericProviderDispatcher"
class="org.apache.axis2.jaxws.dispatchers.GenericProviderDispatcher"/>
<handler name="MustUnderstandValidationDispatcher"
class="org.apache.axis2.jaxws.dispatchers.MustUnderstandValidationDispatcher"/>
</phase>
<phase name="RMPhase"/>
<!-- user can add his own phases to this area -->
<phase name="OperationInFaultPhase"/>
<phase name="soapmonitorPhase"/>
</phaseOrder>
<phaseOrder type="OutFaultFlow">
<!-- user can add his own phases to this area -->
<phase name="soapmonitorPhase"/>
<phase name="OperationOutFaultPhase"/>
<phase name="RMPhase"/>
<phase name="PolicyDetermination"/>
<phase name="MessageOut"/>
<phase name="Security"/>
</phaseOrder>
</axisconfig>