Download JAR files tagged by error with all dependencies

Lazy Bayesian Rules Classifier. The naive Bayesian classifier provides a simple and effective approach to classifier learning, but its attribute independence assumption is often violated in the real world. Lazy Bayesian Rules selectively relaxes the independence assumption, achieving lower error rates over a range of learning tasks. LBR defers processing to classification time, making it a highly efficient and accurate classification algorithm when small numbers of objects are to be classified. For more information, see: Zijian Zheng, G. Webb (2000). Lazy Learning of Bayesian Rules. Machine Learning. 4(1):53-84.

MulTEx is a simple, but powerful framework for organizing exceptions and messages in a multi-tier Java software system. It offers the key features: Causal chains/trees as a means to capture low-level error information Redundancy-free stack traces in the case of indirectly caused exceptions Internationalizable message texts and parameters for exceptions Services for reporting an exception with its causal chain/tree onto streams and screens A standard way for writing method bodies with regard to exceptions. MulTEx depends on Java >= 1.4

Stepping is a framework designed to ease the implementation of data processing solutions. In use cases where we need to implement data or data-streaming algorithms or any other processing on data, we need to first handle many different infrastructure issues. For example, we need to decide how to split the data processing logic into different steps, think about our threading policy, how to handle communication between the different steps, error handling etc. One of the most important subjects is the Threading Policy of our solution. For example, we need to think how many threads to open, have the option to distribute the processing of data to multiple 'executors' in parallel, have a thread-safe communication layer between the threads etc. On top of that we also care a lot about the performance of our solution, we want to make sure that the latency added by these infrastructures is minimal as possible. Stepping aims to handle many of these aspects so developers can spend their time on the business logic instead of solving these infrastructure and data flow issues issues over and over again.

JCQL is a tool allowing to generate boilerplate java code from existing cassandra schema. It is intended to be used with Cassandra 2.1+ due to support of UDTs (User Defined Types)/Tuples/Collections. Cassandra's UDTs/Tuples/Collections and an ability to introspect schema through java driver make it possible to automatically generate POJOs and corresponding mappers between database and java models. Properly generated java code saves development efforts and is less error-prone compared to hand coding. Accompanied with proper CI and deployment it can also guarantee consistency between database and java models at any point of application lifecycle from development to production rollout. JCQL does not rely on java reflection or annotations which means all discrepancies between actual cassandra schema and what client code expects it to be will be identified during compilation not at runtime in the middle of the night right after production release. No need to worry about Cassandra client code performance implications due to use of reflection.

This is a specialized version of the Clirr Maven Plugin. It adds capabilities for excluding specific error types, as well as separating code into three, rather than two, subgroups: Internal code (no checks) Externally invoked code (Annotated with an "externally invoked" annotation, same as Externally implemented, but adding methods to interfaces and abstract classes is allowed) Externally implemented code (Assumed default. Full backwards compatibility required *unless* an interface is annotated with a defined adaptor annotation, in which case full backwards compatibility is required for the adaptor class, but the rules of @ExternallyInvoked apply to the interface itself) Clirr is a tool that checks Java libraries for binary and source compatibility with older releases. Basically you give it two sets of jar files and Clirr dumps out a list of changes in the public API. The clirr-maven-plugin can be configured to break the build, if it detects incompatible api changes. In a continuous integration process, the clirr-maven-plugin can automatically prevent accidental introduction of binary or source compatibility problems. Additionally, the plugin can generate a report as part of the generated site.

Module that defines the HttpChannel API. HttpChannels abstract complex download and upload steps into a simple and easy to use NIO Channel. NIO Channels can be wrapped into an InputStream or OutputStream and used in any way you may find possible to. Aside from that, Channels can be used natively in most next-gen libraries, meaning that you don't even need to wrap anything, just start writing or reading data to or from the channel wth a ByteBuffer. Anyone using the library should try to rely on code from this module only and, only if necessary, on configuration classes that are implementation specific. Relying on any other resource or class is considered an error and should NOT be done. One of the most interesting usages of channels for uploads and download is that you can easily copy data straight from one channel to the other, with less than 10 lines of code! Also, channels allows the implementation of a "tee" mechanism, in which data redden from a single channel can be copied to several other channels on the fly!

GlassFish build depends on properly functioning several custom lifecycle mappings and artifact handlers. Because these are necessary to resolve dependencies and to run "gf:run" goal and etc., it is critical that these extensions be made available to Maven early on during Maven execution. This definition was originally in maven-glassfish-plugin, which was integrated into Maven POM through <plugin>/<extensions>true marking, but after a series of debugging to resolve artifact resolution failure problems, it turns out that that doesn't cause Maven to load components early enough. I tried to circumbent the prolem by also registering the maven-glassfish-plugin as an extension module (via <build>/<extensions/<extension>), but that apparently confuses Maven to no end --- I get build errors like this: [INFO] Internal error in the plugin manager executing goal 'org.apache.maven.plugins:maven-jar-plugin:2.1:jar': Unable to find the mojo 'org.apache.maven.plugins:maven-jar-plugin:2.1:jar' in the plugin 'org.apache.maven.plugins:maven-jar-plugin' This is obviously one of the problematic areas of Maven, so to avoid doing hack over hack, I'm simply moving the component definitions to its own module.

GlassFish build depends on properly functioning several custom lifecycle mappings and artifact handlers. Because these are necessary to resolve dependencies and to run "gf:run" goal and etc., it is critical that these extensions be made available to Maven early on during Maven execution. This definition was originally in maven-glassfish-plugin, which was integrated into Maven POM through <plugin>/<extensions>true marking, but after a series of debugging to resolve artifact resolution failure problems, it turns out that that doesn't cause Maven to load components early enough. I tried to circumbent the prolem by also registering the maven-glassfish-plugin as an extension module (via <build>/<extensions/<extension>), but that apparently confuses Maven to no end --- I get build errors like this: [INFO] Internal error in the plugin manager executing goal 'org.apache.maven.plugins:maven-jar-plugin:2.1:jar': Unable to find the mojo 'org.apache.maven.plugins:maven-jar-plugin:2.1:jar' in the plugin 'org.apache.maven.plugins:maven-jar-plugin' This is obviously one of the problematic areas of Maven, so to avoid doing hack over hack, I'm simply moving the component definitions to its own module.

This plugin provides support for textlint. <h3>What&rsquo;s the textlint?</h3> <p>See <a href="https://github.com/textlint/textlint">https://github.com/textlint/textlint</a></p> <h3>Usage</h3> <h4>Install textlint and rules</h4> <p>Of course, it assumes that nodejs and npm are installed.</p> <p>e.g.</p> <pre><code>$ mkdir txtlint $ cd txtlint $ npm init $ npm install textlint --save-dev $ npm install textlint-rule-max-ten textlint-rule-spellcheck-tech-word textlint-rule-no-mix-dearu-desumasu --save-dev </code></pre> <h4>Create .textlintrc</h4> <pre><code>$ touch .textlintrc </code></pre> <pre><code class="json">{ &quot;rules&quot;: { &quot;max-ten&quot;: { &quot;max&quot;: 3 }, &quot;spellcheck-tech-word&quot;: true, &quot;no-mix-dearu-desumasu&quot;: true } } </code></pre> <p>You can also set parameters to Options (see below).</p> <h4>Set textlint and .textlintrc paths</h4> <p>Set paths to the Options (see below).</p> <p>e.g.</p> <ul> <li>textlint Path: /path/to/txtlint/node_modules/.bin/textlint (textlint.cmd in Windows)</li> <li>.textlintrc Path: /path/to/textlint/.textlintrc</li> </ul> <h4>Open Action Items window</h4> <ul> <li>Click Window > Action Items.</li> <li>Click &ldquo;Show action items for currently edited file only&rdquo; icon.</li> <li>Open your markdown or text file.</li> </ul> <h3>Options</h3> <p>Tools > Options > Editor > textlint</p> <ul> <li>textlint Path: Absolute path to textlint</li> <li>.textlintrc Path: Absolute path to .textlintrc</li> <li>Options : You can set options for the textlint command</li> <li>Enable in HTML files: To use the html plugin, you can check this</li> <li>Refresh on Save: To scan the document on save, you can check this (Checked by default)</li> <li>Show Annotations: To show annotations in the glyph gutter, you can check this (Checked by default)</li> </ul> <h3>Actions</h3> <h4>Fix</h4> <p>You have to save your file before you run this action.<br/> If there is a fixable rule&rsquo;s error, you can fix it. Right-click an item > Click <code>Fix</code>.<br/> To refresh items, your document is saved once.</p> <h4>Fix All</h4> <p>You have to save your file before you run this action.<br/> If there are fixable rule&rsquo;s errors, you can fix them. Right-click an item > Click <code>Fix All</code>.<br/> This action runs <code>textlint --fix</code> command.</p> <h4>Refresh</h4> <p>You can refresh results forcibly by the following action: Right-click your editor > Click "textlint Refresh".</p> <p>You can also set the shortcut key(Tools > Options > Keymap). </p> <h3>NOTE</h3> <ul> <li>The plugin scans only current file.</li> <li>The plugin does not refresh results automatically. Please save your file or run the refresh action.</li> <li>Use <code>UTF-8</code> as file encoding and <code>LF</code> as line endings.</li> <li>This plugin may not work properly in Windows. (Please try to check above.)</li> <li>If you cannot get expected results, just try to run the <code>textlint</code> commands once in your CLI.</li> </ul>

This package currently contains classes for training multilayer perceptrons with one hidden layer, where the number of hidden units is user specified. MLPClassifier can be used for classification problems and MLPRegressor is the corresponding class for numeric prediction tasks. The former has as many output units as there are classes, the latter only one output unit. Both minimise a penalised squared error with a quadratic penalty on the (non-bias) weights, i.e., they implement "weight decay", where this penalised error is averaged over all training instances. The size of the penalty can be determined by the user by modifying the "ridge" parameter to control overfitting. The sum of squared weights is multiplied by this parameter before added to the squared error. Both classes use BFGS optimisation by default to find parameters that correspond to a local minimum of the error function. but optionally conjugated gradient descent is available, which can be faster for problems with many parameters. Logistic functions are used as the activation functions for all units apart from the output unit in MLPRegressor, which employs the identity function. Input attributes are standardised to zero mean and unit variance. MLPRegressor also rescales the target attribute (i.e., "class") using standardisation. All network parameters are initialised with small normally distributed random values.