Download JAR files tagged by implemented with all dependencies

Jsgen is a Java Source Generation Framework: That means, it should be a valuable tool, if you intend to write a custom generator for Java sources. As such, it is the successor of a previous framework, called JaxMeJS (http://jaxme.sourceforge.net/JaxMeJS/docs/index.html). The predecessor came into being as a standalone project. It was incorporated into the bigger JaxMe project, when the latter was adopted by the Apache Webservices project. And it was buried as part of the bigger project, when the latter was moved to the Apache Attic (http://svn.apache.org/repos/asf/webservices/archive/jaxme/). That was fine for quite some time, because the latest released version (JaxMeJS 0.5.2) did its job quite well. Over the years, however, the Java language has evolved, and the lack of support for features like Generics, or Annotations, became a burden. Hence the Successor: Jsgen picks up, where JaxMeJS ended. It is, however, a complete rewrite with several additional features, that the author considers to be important for modern Java applications: 1. It supports Generics. 2. It supports Annotations. 3. The builder pattern has been adopted. Almost all important classes are implemented as builders. This should make writing the actual source generators much more concise, and maintainable, than it used to be before. 4. The code style is configurable. Code styles allow you to concentrate on the actual work. The resulting Jave source will look nicely formatted, anyways. As of this writing, you can select between two builtin code styles: - The default code style is basically the authors personal free style, roughly comparable to the default code style of the Eclipse Java IDE. - As an alternative, there is also a Maven code style, which is widely used in the Open Source communities. Compared to the default style, it is less concise, if not even a bit verbose. On the other hand, it is widely adopted by projects in the vicinity of {{{https://maven.apache.org}Apache Maven}}. 5. Import lists are created, and sorted, automatically.

The OODT grid services (product and profile services) use CORBA or RMI as their underlying network transport. However, limitations of CORBA and RMI make them inappropriate for large-scale deployments. For one, both are procedural mechanisms, providing a remote interface that resembles a method call. This makes streaming of data from a service impossible, because there are limitations to the sizes of data structures that can be passed over a remote method call. Instead, repeated calls must be made to retrieve each block of a product, making transfer speeds horribly slow compared to HTTP or FTP. (Block-based retrieval of profiles was never implemented, resulting in out of memory conditions for large profile results, which is another problem.) Second, both CORBA and RMI rely on a central name registry. The registry makes an object independent of its network location, enabling a client to call it by name (looking up its last known location in the registry). However, this requires that server objects be able to make outbound network calls to the registry (through any outbound firewall), and that the registry accept those registrations (through any inbound firewall). This required administrative action at institutions hosting server objects and at the institution hosting the registry. Often, these firewall exceptions would change without notice as system adminstrators changed at each location (apparently firewall exceptions are poorly documented everywhere). Further, in the two major deployments of OODT (PDS and EDRN), server objects have almost never moved, nullifying any benefit of the registry. This project, OODT Web Grid Services, avoids the prolems of CORBA and RMI by using HTTP as the transport mechanism for products and profiles. Further, it provides a password-protected mechanism to add new sets of product and profile query handlers, enabling seamless activation of additional capabilities.

Mahout's goal is to build scalable machine learning libraries. With scalable we mean: Scalable to reasonably large data sets. Our core algorithms for clustering, classfication and batch based collaborative filtering are implemented on top of Apache Hadoop using the map/reduce paradigm. However we do not restrict contributions to Hadoop based implementations: Contributions that run on a single node or on a non-Hadoop cluster are welcome as well. The core libraries are highly optimized to allow for good performance also for non-distributed algorithms. Scalable to support your business case. Mahout is distributed under a commercially friendly Apache Software license. Scalable community. The goal of Mahout is to build a vibrant, responsive, diverse community to facilitate discussions not only on the project itself but also on potential use cases. Come to the mailing lists to find out more. Currently Mahout supports mainly four use cases: Recommendation mining takes users' behavior and from that tries to find items users might like. Clustering takes e.g. text documents and groups them into groups of topically related documents. Classification learns from exisiting categorized documents what documents of a specific category look like and is able to assign unlabelled documents to the (hopefully) correct category. Frequent itemset mining takes a set of item groups (terms in a query session, shopping cart content) and identifies, which individual items usually appear together.

Pact server =========== The pact server is a stand-alone interactions recorder and verifier, aimed at clients that are non-JVM or non-Ruby based. The pact client for that platform will need to be implemented, but it only be responsible for generating the `JSON` interactions, running the tests and communicating with the server. The server implements a `JSON` `REST` Admin API with the following endpoints. / -> For diagnostics, currently returns a list of ports of the running mock servers. /create -> For initialising a test server and submitting the JSON interactions. It returns a port /complete -> For finalising and verifying the interactions with the server. It writes the `JSON` pact file to disk. ## Running the server ### Versions 2.2.6+ Pact server takes the following parameters: ``` Usage: pact-jvm-server [options] [port] port port to run on (defaults to 29999) --help prints this usage text -h <value> | --host <value> host to bind to (defaults to localhost) -l <value> | --mock-port-lower <value> lower bound to allocate mock ports (defaults to 20000) -u <value> | --mock-port-upper <value> upper bound to allocate mock ports (defaults to 40000) -d | --daemon run as a daemon process -v <value> | --pact-version <value> pact version to generate for (2 or 3) -k <value> | --keystore-path <value> Path to keystore -p <value> | --keystore-password <value> Keystore password -s <value> | --ssl-port <value> Ssl port the mock server should run on. lower and upper bounds are ignored --debug run with debug logging ``` ### Using trust store 3.4.0+ Trust store can be used. However, it is limited to a single port for the time being. ### Prior to version 2.2.6 Pact server takes one optional parameter, the port number to listen on. If not provided, it will listen on 29999. It requires an active console to run. ### Using a distribution archive You can download a [distribution from maven central](http://search.maven.org/remotecontent?filepath=au/com/dius/pact-jvm-server_2.11/2.2.4/). There is both a ZIP and TAR archive. Unpack it to a directory of choice and then run the script in the bin directory. ### Building a distribution bundle You can build an application bundle with gradle by running (for 2.11 version): $ ./gradlew :pact-jvm-server_2.11:installdist This will create an app bundle in `build/2.11/install/pact-jvm-server_2.11`. You can then execute it with: $ java -jar pact-jvm-server/build/2.10/install/pact-jvm-server_2.11/lib/pact-jvm-server_2.11-3.2.11.jar or with the generated bundle script file: $ pact-jvm-server/build/2.11/install/pact-jvm-server_2.11/bin/pact-jvm-server_2.11 By default will run on port `29999` but a port number can be optionally supplied. ### Running it with docker You can use a docker image to execute the mock server as a docker container. $ docker run -d -p 8080:8080 -p 20000-20010:20000-20010 uglyog/pact-jvm-server This will run the main server on port 8080, and each created mock server on ports 20000-20010. You can map the ports to any you require. ## Life cycle The following actions are expected to occur * The client calls `/create` to initialise a server with the expected `JSON` interactions and state * The admin server will start a mock server on a random port and return the port number in the response * The client will execute its interaction tests against the mock server with the supplied port * Once finished, the client will call `/complete' on the Admin API, posting the port number * The pact server will verify the interactions and write the `JSON` `pact` file to disk under `/target` * The mock server running on the supplied port will be shutdown. ## Endpoints ### /create The client will need `POST` to `/create` the generated `JSON` interactions, also providing a state as a query parameter and a path. For example: POST http://localhost:29999/create?state=NoUsers&path=/sub/ref/path '{ "provider": { "name": "Animal_Service"}, ... }' This will create a new running mock service provider on a randomly generated port. The port will be returned in the `201` response: { "port" : 34423 } But you can also reference the path from `/sub/ref/path` using the server port. The service will not strip the prefix path, but instead will use it as a differentiator. If your services do not have differences in the prefix of their path, then you will have to use the port method. ### /complete Once the client has finished running its tests against the mock server on the supplied port (in this example port `34423`) the client will need to `POST` to `/complete` the port number of the mock server that was used. For example: POST http://localhost:29999/complete '{ "port" : 34423 }' This will cause the Pact server to verify the interactions, shutdown the mock server running on that port and writing the pact `JSON` file to disk under the `target` directory. ### / The `/` endpoint is for diagnostics and to check that the pact server is running. It will return all the currently running mock servers port numbers. For example: GET http://localhost:29999/ '{ "ports": [23443,43232] }'

Pact server =========== The pact server is a stand-alone interactions recorder and verifier, aimed at clients that are non-JVM or non-Ruby based. The pact client for that platform will need to be implemented, but it only be responsible for generating the `JSON` interactions, running the tests and communicating with the server. The server implements a `JSON` `REST` Admin API with the following endpoints. / -> For diagnostics, currently returns a list of ports of the running mock servers. /create -> For initialising a test server and submitting the JSON interactions. It returns a port /complete -> For finalising and verifying the interactions with the server. It writes the `JSON` pact file to disk. ## Running the server ### Versions 2.2.6+ Pact server takes the following parameters: ``` Usage: pact-jvm-server [options] [port] port port to run on (defaults to 29999) --help prints this usage text -h <value> | --host <value> host to bind to (defaults to localhost) -l <value> | --mock-port-lower <value> lower bound to allocate mock ports (defaults to 20000) -u <value> | --mock-port-upper <value> upper bound to allocate mock ports (defaults to 40000) -d | --daemon run as a daemon process -v <value> | --pact-version <value> pact version to generate for (2 or 3) -k <value> | --keystore-path <value> Path to keystore -p <value> | --keystore-password <value> Keystore password -s <value> | --ssl-port <value> Ssl port the mock server should run on. lower and upper bounds are ignored --debug run with debug logging ``` ### Using trust store 3.4.0+ Trust store can be used. However, it is limited to a single port for the time being. ### Prior to version 2.2.6 Pact server takes one optional parameter, the port number to listen on. If not provided, it will listen on 29999. It requires an active console to run. ### Using a distribution archive You can download a [distribution from maven central](http://search.maven.org/remotecontent?filepath=au/com/dius/pact-jvm-server_2.11/2.2.4/). There is both a ZIP and TAR archive. Unpack it to a directory of choice and then run the script in the bin directory. ### Building a distribution bundle You can build an application bundle with gradle by running (for 2.11 version): $ ./gradlew :pact-jvm-server_2.11:installdist This will create an app bundle in `build/2.11/install/pact-jvm-server_2.11`. You can then execute it with: $ java -jar pact-jvm-server/build/2.10/install/pact-jvm-server_2.11/lib/pact-jvm-server_2.11-3.2.11.jar or with the generated bundle script file: $ pact-jvm-server/build/2.11/install/pact-jvm-server_2.11/bin/pact-jvm-server_2.11 By default will run on port `29999` but a port number can be optionally supplied. ### Running it with docker You can use a docker image to execute the mock server as a docker container. $ docker run -d -p 8080:8080 -p 20000-20010:20000-20010 uglyog/pact-jvm-server This will run the main server on port 8080, and each created mock server on ports 20000-20010. You can map the ports to any you require. ## Life cycle The following actions are expected to occur * The client calls `/create` to initialise a server with the expected `JSON` interactions and state * The admin server will start a mock server on a random port and return the port number in the response * The client will execute its interaction tests against the mock server with the supplied port * Once finished, the client will call `/complete' on the Admin API, posting the port number * The pact server will verify the interactions and write the `JSON` `pact` file to disk under `/target` * The mock server running on the supplied port will be shutdown. ## Endpoints ### /create The client will need `POST` to `/create` the generated `JSON` interactions, also providing a state as a query parameter and a path. For example: POST http://localhost:29999/create?state=NoUsers&path=/sub/ref/path '{ "provider": { "name": "Animal_Service"}, ... }' This will create a new running mock service provider on a randomly generated port. The port will be returned in the `201` response: { "port" : 34423 } But you can also reference the path from `/sub/ref/path` using the server port. The service will not strip the prefix path, but instead will use it as a differentiator. If your services do not have differences in the prefix of their path, then you will have to use the port method. ### /complete Once the client has finished running its tests against the mock server on the supplied port (in this example port `34423`) the client will need to `POST` to `/complete` the port number of the mock server that was used. For example: POST http://localhost:29999/complete '{ "port" : 34423 }' This will cause the Pact server to verify the interactions, shutdown the mock server running on that port and writing the pact `JSON` file to disk under the `target` directory. ### / The `/` endpoint is for diagnostics and to check that the pact server is running. It will return all the currently running mock servers port numbers. For example: GET http://localhost:29999/ '{ "ports": [23443,43232] }'

Pact server =========== The pact server is a stand-alone interactions recorder and verifier, aimed at clients that are non-JVM or non-Ruby based. The pact client for that platform will need to be implemented, but it only be responsible for generating the `JSON` interactions, running the tests and communicating with the server. The server implements a `JSON` `REST` Admin API with the following endpoints. / -> For diagnostics, currently returns a list of ports of the running mock servers. /create -> For initialising a test server and submitting the JSON interactions. It returns a port /complete -> For finalising and verifying the interactions with the server. It writes the `JSON` pact file to disk. ## Running the server ### Versions 2.2.6+ Pact server takes the following parameters: ``` Usage: pact-jvm-server [options] [port] port port to run on (defaults to 29999) --help prints this usage text -h <value> | --host <value> host to bind to (defaults to localhost) -l <value> | --mock-port-lower <value> lower bound to allocate mock ports (defaults to 20000) -u <value> | --mock-port-upper <value> upper bound to allocate mock ports (defaults to 40000) -d | --daemon run as a daemon process -v <value> | --pact-version <value> pact version to generate for (2 or 3) -k <value> | --keystore-path <value> Path to keystore -p <value> | --keystore-password <value> Keystore password -s <value> | --ssl-port <value> Ssl port the mock server should run on. lower and upper bounds are ignored --debug run with debug logging ``` ### Using trust store 3.4.0+ Trust store can be used. However, it is limited to a single port for the time being. ### Prior to version 2.2.6 Pact server takes one optional parameter, the port number to listen on. If not provided, it will listen on 29999. It requires an active console to run. ### Using a distribution archive You can download a [distribution from maven central](http://search.maven.org/remotecontent?filepath=au/com/dius/pact-jvm-server_2.11/2.2.4/). There is both a ZIP and TAR archive. Unpack it to a directory of choice and then run the script in the bin directory. ### Building a distribution bundle You can build an application bundle with gradle by running (for 2.11 version): $ ./gradlew :pact-jvm-server_2.11:installdist This will create an app bundle in `build/2.11/install/pact-jvm-server_2.11`. You can then execute it with: $ java -jar pact-jvm-server/build/2.10/install/pact-jvm-server_2.11/lib/pact-jvm-server_2.11-3.2.11.jar or with the generated bundle script file: $ pact-jvm-server/build/2.11/install/pact-jvm-server_2.11/bin/pact-jvm-server_2.11 By default will run on port `29999` but a port number can be optionally supplied. ### Running it with docker You can use a docker image to execute the mock server as a docker container. $ docker run -d -p 8080:8080 -p 20000-20010:20000-20010 uglyog/pact-jvm-server This will run the main server on port 8080, and each created mock server on ports 20000-20010. You can map the ports to any you require. ## Life cycle The following actions are expected to occur * The client calls `/create` to initialise a server with the expected `JSON` interactions and state * The admin server will start a mock server on a random port and return the port number in the response * The client will execute its interaction tests against the mock server with the supplied port * Once finished, the client will call `/complete' on the Admin API, posting the port number * The pact server will verify the interactions and write the `JSON` `pact` file to disk under `/target` * The mock server running on the supplied port will be shutdown. ## Endpoints ### /create The client will need `POST` to `/create` the generated `JSON` interactions, also providing a state as a query parameter and a path. For example: POST http://localhost:29999/create?state=NoUsers&path=/sub/ref/path '{ "provider": { "name": "Animal_Service"}, ... }' This will create a new running mock service provider on a randomly generated port. The port will be returned in the `201` response: { "port" : 34423 } But you can also reference the path from `/sub/ref/path` using the server port. The service will not strip the prefix path, but instead will use it as a differentiator. If your services do not have differences in the prefix of their path, then you will have to use the port method. ### /complete Once the client has finished running its tests against the mock server on the supplied port (in this example port `34423`) the client will need to `POST` to `/complete` the port number of the mock server that was used. For example: POST http://localhost:29999/complete '{ "port" : 34423 }' This will cause the Pact server to verify the interactions, shutdown the mock server running on that port and writing the pact `JSON` file to disk under the `target` directory. ### / The `/` endpoint is for diagnostics and to check that the pact server is running. It will return all the currently running mock servers port numbers. For example: GET http://localhost:29999/ '{ "ports": [23443,43232] }'

Pact server =========== The pact server is a stand-alone interactions recorder and verifier, aimed at clients that are non-JVM or non-Ruby based. The pact client for that platform will need to be implemented, but it only be responsible for generating the `JSON` interactions, running the tests and communicating with the server. The server implements a `JSON` `REST` Admin API with the following endpoints. / -> For diagnostics, currently returns a list of ports of the running mock servers. /create -> For initialising a test server and submitting the JSON interactions. It returns a port /complete -> For finalising and verifying the interactions with the server. It writes the `JSON` pact file to disk. ## Running the server ### Versions 2.2.6+ Pact server takes the following parameters: ``` Usage: pact-jvm-server [options] [port] port port to run on (defaults to 29999) --help prints this usage text -h <value> | --host <value> host to bind to (defaults to localhost) -l <value> | --mock-port-lower <value> lower bound to allocate mock ports (defaults to 20000) -u <value> | --mock-port-upper <value> upper bound to allocate mock ports (defaults to 40000) -d | --daemon run as a daemon process --debug run with debug logging ``` ### Prior to version 2.2.6 Pact server takes one optional parameter, the port number to listen on. If not provided, it will listen on 29999. It requires an active console to run. ### Using a distribution archive You can download a [distribution from maven central](http://search.maven.org/remotecontent?filepath=au/com/dius/pact-jvm-server_2.11/2.2.4/). There is both a ZIP and TAR archive. Unpack it to a directory of choice and then run the script in the bin directory. ### Building a distribution bundle You can build an application bundle with gradle by running (for 2.11 version): $ ./gradlew :pact-jvm-server_2.11:installdist This will create an app bundle in `build/2.11/install/pact-jvm-server_2.11`. You can then execute it with: $ java -jar pact-jvm-server/build/2.10/install/pact-jvm-server_2.11/lib/pact-jvm-server_2.11-2.2.4.jar or with the generated bundle script file: $ pact-jvm-server/build/2.11/install/pact-jvm-server_2.11/bin/pact-jvm-server_2.11 By default will run on port `29999` but a port number can be optionally supplied. ### Running it with docker You can use a docker image to execute the mock server as a docker container. $ docker run -d -p 8080:8080 -p 20000-20010:20000-20010 uglyog/pact-jvm-server This will run the main server on port 8080, and each created mock server on ports 20000-20010. You can map the ports to any you require. ## Life cycle The following actions are expected to occur * The client calls `/create` to initialise a server with the expected `JSON` interactions and state * The admin server will start a mock server on a random port and return the port number in the response * The client will execute its interaction tests against the mock server with the supplied port * Once finished, the client will call `/complete' on the Admin API, posting the port number * The pact server will verify the interactions and write the `JSON` `pact` file to disk under `/target` * The mock server running on the supplied port will be shutdown. ## Endpoints ### /create The client will need `POST` to `/create` the generated `JSON` interactions, also providing a state as a query parameter. For example: POST http://localhost:29999/create?state=NoUsers '{ "provider": { "name": "Animal_Service"}, ... }' This will create a new running mock service provider on a randomly generated port. The port will be returned in the `201` response: { "port" : 34423 } ### /complete Once the client has finished running its tests against the mock server on the supplied port (in this example port `34423`) the client will need to `POST` to `/complete` the port number of the mock server that was used. For example: POST http://localhost:29999/complete '{ "port" : 34423 }' This will cause the Pact server to verify the interactions, shutdown the mock server running on that port and writing the pact `JSON` file to disk under the `target` directory. ### / The `/` endpoint is for diagnostics and to check that the pact server is running. It will return all the currently running mock servers port numbers. For example: GET http://localhost:29999/ '{ "ports": [23443,43232] }'

Pact consumer ============= Pact Consumer is used by projects that are consumers of an API. Most projects will want to use pact-consumer via one of the test framework specific projects. If your favourite framework is not implemented, this module should give you all the hooks you need. Provides a DSL for use with Java to build consumer pacts. ## Dependency The library is available on maven central using: * group-id = `au.com.dius` * artifact-id = `pact-jvm-consumer_2.11` ## DSL Usage Example in a JUnit test: ```java import au.com.dius.pact.model.MockProviderConfig; import au.com.dius.pact.model.PactFragment; import org.junit.Test; import java.io.IOException; import java.util.HashMap; import java.util.Map; import static org.junit.Assert.assertEquals; public class PactTest { @Test public void testPact() { PactFragment pactFragment = ConsumerPactBuilder .consumer("Some Consumer") .hasPactWith("Some Provider") .uponReceiving("a request to say Hello") .path("/hello") .method("POST") .body("{\"name\": \"harry\"}") .willRespondWith() .status(200) .body("{\"hello\": \"harry\"}") .toFragment(); MockProviderConfig config = MockProviderConfig.createDefault(); VerificationResult result = pactFragment.runConsumer(config, new TestRun() { @Override public void run(MockProviderConfig config) { Map expectedResponse = new HashMap(); expectedResponse.put("hello", "harry"); try { assertEquals(new ProviderClient(config.url()).hello("{\"name\": \"harry\"}"), expectedResponse); } catch (IOException e) {} } }); if (result instanceof PactError) { throw new RuntimeException(((PactError)result).error()); } assertEquals(ConsumerPactTest.PACT_VERIFIED, result); } } ``` The DSL has the following pattern: ```java .consumer("Some Consumer") .hasPactWith("Some Provider") .given("a certain state on the provider") .uponReceiving("a request for something") .path("/hello") .method("POST") .body("{\"name\": \"harry\"}") .willRespondWith() .status(200) .body("{\"hello\": \"harry\"}") .uponReceiving("another request for something") .path("/hello") .method("POST") .body("{\"name\": \"harry\"}") .willRespondWith() .status(200) .body("{\"hello\": \"harry\"}") . . . .toFragment() ``` You can define as many interactions as required. Each interaction starts with `uponReceiving` followed by `willRespondWith`. The test state setup with `given` is a mechanism to describe what the state of the provider should be in before the provider is verified. It is only recorded in the consumer tests and used by the provider verification tasks. ### Building JSON bodies with PactDslJsonBody DSL The body method of the ConsumerPactBuilder can accept a PactDslJsonBody, which can construct a JSON body as well as define regex and type matchers. For example: ```java PactDslJsonBody body = new PactDslJsonBody() .stringType("name") .booleanType("happy") .hexValue("hexCode") .id() .ipAddress("localAddress") .numberValue("age", 100) .timestamp(); ``` #### DSL Matching methods The following matching methods are provided with the DSL. In most cases, they take an optional value parameter which will be used to generate example values (i.e. when returning a mock response). If no example value is given, a random one will be generated. | method | description | |--------|-------------| | string, stringValue | Match a string value (using string equality) | | number, numberValue | Match a number value (using Number.equals)\* | | booleanValue | Match a boolean value (using equality) | | stringType | Will match all Strings | | numberType | Will match all numbers\* | | integerType | Will match all numbers that are integers (both ints and longs)\* | | decimalType | Will match all real numbers (floating point and decimal)\* | | booleanType | Will match all boolean values (true and false) | | stringMatcher | Will match strings using the provided regular expression | | timestamp | Will match string containing timestamps. If a timestamp format is not given, will match an ISO timestamp format | | date | Will match string containing dates. If a date format is not given, will match an ISO date format | | time | Will match string containing times. If a time format is not given, will match an ISO time format | | ipAddress | Will match string containing IP4 formatted address. | | id | Will match all numbers by type | | hexValue | Will match all hexadecimal encoded strings | | uuid | Will match strings containing UUIDs | _\* Note:_ JSON only supports double precision floating point values. Depending on the language implementation, they may parsed as integer, floating point or decimal numbers. #### Ensuring all items in a list match an example (2.2.0+) Lots of the time you might not know the number of items that will be in a list, but you want to ensure that the list has a minimum or maximum size and that each item in the list matches a given example. You can do this with the `arrayLike`, `minArrayLike` and `maxArrayLike` functions. | function | description | |----------|-------------| | `eachLike` | Ensure that each item in the list matches the provided example | | `maxArrayLike` | Ensure that each item in the list matches the provided example and the list is no bigger than the provided max | | `minArrayLike` | Ensure that each item in the list matches the provided example and the list is no smaller than the provided min | For example: ```java DslPart body = new PactDslJsonBody() .minArrayLike("users") .id() .stringType("name") .closeObject() .closeArray(); ``` This will ensure that the users list is never empty and that each user has an identifier that is a number and a name that is a string. #### Matching JSON values at the root (Version 3.2.2/2.4.3+) For cases where you are expecting basic JSON values (strings, numbers, booleans and null) at the root level of the body and need to use matchers, you can use the `PactDslJsonRootValue` class. It has all the DSL matching methods for basic values that you can use. For example: ```java .consumer("Some Consumer") .hasPactWith("Some Provider") .uponReceiving("a request for a basic JSON value") .path("/hello") .willRespondWith() .status(200) .body(PactDslJsonRootValue.integerType()) ``` #### Root level arrays that match all items (version 2.2.11+) If the root of the body is an array, you can create PactDslJsonArray classes with the following methods: | function | description | |----------|-------------| | `arrayEachLike` | Ensure that each item in the list matches the provided example | | `arrayMinLike` | Ensure that each item in the list matches the provided example and the list is no bigger than the provided max | | `arrayMaxLike` | Ensure that each item in the list matches the provided example and the list is no smaller than the provided min | For example: ```java PactDslJsonArray.arrayEachLike() .date("clearedDate", "mm/dd/yyyy", date) .stringType("status", "STATUS") .decimalType("amount", 100.0) .closeObject() ``` This will then match a body like: ```json [ { "clearedDate" : "07/22/2015", "status" : "C", "amount" : 15.0 }, { "clearedDate" : "07/22/2015", "status" : "C", "amount" : 15.0 }, { "clearedDate" : "07/22/2015", "status" : "C", "amount" : 15.0 } ] ``` #### Matching arrays of arrays (version 3.2.12/2.4.14+) For the case where you have arrays of arrays (GeoJSON is an example), the following methods have been provided: | function | description | |----------|-------------| | `eachArrayLike` | Ensure that each item in the array is an array that matches the provided example | | `eachArrayWithMaxLike` | Ensure that each item in the array is an array that matches the provided example and the array is no bigger than the provided max | | `eachArrayWithMinLike` | Ensure that each item in the array is an array that matches the provided example and the array is no smaller than the provided min | For example (with GeoJSON structure): ```java new PactDslJsonBody() .stringType("type","FeatureCollection") .eachLike("features") .stringType("type","Feature") .object("geometry") .stringType("type","Point") .eachArrayLike("coordinates") // coordinates is an array of arrays .decimalType(-7.55717) .decimalType(49.766896) .closeArray() .closeArray() .closeObject() .object("properties") .stringType("prop0","value0") .closeObject() .closeObject() .closeArray() ``` This generated the following JSON: ```json { "features": [ { "geometry": { "coordinates": [[-7.55717, 49.766896]], "type": "Point" }, "type": "Feature", "properties": { "prop0": "value0" } } ], "type": "FeatureCollection" } ``` and will be able to match all coordinates regardless of the number of coordinates. #### Matching any key in a map (3.3.1/2.5.0+) The DSL has been extended for cases where the keys in a map are IDs. For an example of this, see [#313](https://github.com/DiUS/pact-jvm/issues/131). In this case you can use the `eachKeyLike` method, which takes an example key as a parameter. For example: ```java DslPart body = new PactDslJsonBody() .object("one") .eachKeyLike("001", PactDslJsonRootValue.id(12345L)) // key like an id mapped to a matcher .closeObject() .object("two") .eachKeyLike("001-A") // key like an id where the value is matched by the following example .stringType("description", "Some Description") .closeObject() .closeObject() .object("three") .eachKeyMappedToAnArrayLike("001") // key like an id mapped to an array where each item is matched by the following example .id("someId", 23456L) .closeObject() .closeArray() .closeObject(); ``` For an example, have a look at [WildcardKeysTest](src/test/java/au/com/dius/pact/consumer/WildcardKeysTest.java). **NOTE:** The `eachKeyLike` method adds a `*` to the matching path, so the matching definition will be applied to all keys of the map if there is not a more specific matcher defined for a particular key. Having more than one `eachKeyLike` condition applied to a map will result in only one being applied when the pact is verified (probably the last). ### Matching on paths (version 2.1.5+) You can use regular expressions to match incoming requests. The DSL has a `matchPath` method for this. You can provide a real path as a second value to use when generating requests, and if you leave it out it will generate a random one from the regular expression. For example: ```java .given("test state") .uponReceiving("a test interaction") .matchPath("/transaction/[0-9]+") // or .matchPath("/transaction/[0-9]+", "/transaction/1234567890") .method("POST") .body("{\"name\": \"harry\"}") .willRespondWith() .status(200) .body("{\"hello\": \"harry\"}") ``` ### Matching on headers (version 2.2.2+) You can use regular expressions to match request and response headers. The DSL has a `matchHeader` method for this. You can provide an example header value to use when generating requests and responses, and if you leave it out it will generate a random one from the regular expression. For example: ```java .given("test state") .uponReceiving("a test interaction") .path("/hello") .method("POST") .matchHeader("testreqheader", "test.*value") .body("{\"name\": \"harry\"}") .willRespondWith() .status(200) .body("{\"hello\": \"harry\"}") .matchHeader("Location", ".*/hello/[0-9]+", "/hello/1234") ``` ### Matching on query parameters (version 3.3.7+) You can use regular expressions to match request query parameters. The DSL has a `matchQuery` method for this. You can provide an example value to use when generating requests, and if you leave it out it will generate a random one from the regular expression. For example: ```java .given("test state") .uponReceiving("a test interaction") .path("/hello") .method("POST") .matchQuery("a", "\\d+", "100") .matchQuery("b", "[A-Z]", "X") .body("{\"name\": \"harry\"}") .willRespondWith() .status(200) .body("{\"hello\": \"harry\"}") ```

Pact consumer ============= Pact Consumer is used by projects that are consumers of an API. Most projects will want to use pact-consumer via one of the test framework specific projects. If your favourite framework is not implemented, this module should give you all the hooks you need. Provides a DSL for use with Java to build consumer pacts. ## Dependency The library is available on maven central using: * group-id = `au.com.dius` * artifact-id = `pact-jvm-consumer_2.11` ## DSL Usage Example in a JUnit test: ```java import au.com.dius.pact.model.MockProviderConfig; import au.com.dius.pact.model.RequestResponsePact; import org.apache.http.entity.ContentType; import org.jetbrains.annotations.NotNull; import org.junit.Test; import java.io.IOException; import java.util.HashMap; import java.util.Map; import static au.com.dius.pact.consumer.ConsumerPactRunnerKt.runConsumerTest; import static org.junit.Assert.assertEquals; public class PactTest { @Test public void testPact() { RequestResponsePact pact = ConsumerPactBuilder .consumer("Some Consumer") .hasPactWith("Some Provider") .uponReceiving("a request to say Hello") .path("/hello") .method("POST") .body("{\"name\": \"harry\"}") .willRespondWith() .status(200) .body("{\"hello\": \"harry\"}") .toPact(); MockProviderConfig config = MockProviderConfig.createDefault(); PactVerificationResult result = runConsumerTest(pact, config, new PactTestRun() { @Override public void run(@NotNull MockServer mockServer) throws IOException { Map expectedResponse = new HashMap(); expectedResponse.put("hello", "harry"); assertEquals(expectedResponse, new ConsumerClient(mockServer.getUrl()).post("/hello", "{\"name\": \"harry\"}", ContentType.APPLICATION_JSON)); } }); if (result instanceof PactVerificationResult.Error) { throw new RuntimeException(((PactVerificationResult.Error)result).getError()); } assertEquals(PactVerificationResult.Ok.INSTANCE, result); } } ``` The DSL has the following pattern: ```java .consumer("Some Consumer") .hasPactWith("Some Provider") .given("a certain state on the provider") .uponReceiving("a request for something") .path("/hello") .method("POST") .body("{\"name\": \"harry\"}") .willRespondWith() .status(200) .body("{\"hello\": \"harry\"}") .uponReceiving("another request for something") .path("/hello") .method("POST") .body("{\"name\": \"harry\"}") .willRespondWith() .status(200) .body("{\"hello\": \"harry\"}") . . . .toPact() ``` You can define as many interactions as required. Each interaction starts with `uponReceiving` followed by `willRespondWith`. The test state setup with `given` is a mechanism to describe what the state of the provider should be in before the provider is verified. It is only recorded in the consumer tests and used by the provider verification tasks. ### Building JSON bodies with PactDslJsonBody DSL The body method of the ConsumerPactBuilder can accept a PactDslJsonBody, which can construct a JSON body as well as define regex and type matchers. For example: ```java PactDslJsonBody body = new PactDslJsonBody() .stringType("name") .booleanType("happy") .hexValue("hexCode") .id() .ipAddress("localAddress") .numberValue("age", 100) .timestamp(); ``` #### DSL Matching methods The following matching methods are provided with the DSL. In most cases, they take an optional value parameter which will be used to generate example values (i.e. when returning a mock response). If no example value is given, a random one will be generated. | method | description | |--------|-------------| | string, stringValue | Match a string value (using string equality) | | number, numberValue | Match a number value (using Number.equals)\* | | booleanValue | Match a boolean value (using equality) | | stringType | Will match all Strings | | numberType | Will match all numbers\* | | integerType | Will match all numbers that are integers (both ints and longs)\* | | decimalType | Will match all real numbers (floating point and decimal)\* | | booleanType | Will match all boolean values (true and false) | | stringMatcher | Will match strings using the provided regular expression | | timestamp | Will match string containing timestamps. If a timestamp format is not given, will match an ISO timestamp format | | date | Will match string containing dates. If a date format is not given, will match an ISO date format | | time | Will match string containing times. If a time format is not given, will match an ISO time format | | ipAddress | Will match string containing IP4 formatted address. | | id | Will match all numbers by type | | hexValue | Will match all hexadecimal encoded strings | | uuid | Will match strings containing UUIDs | | includesStr | Will match strings containing the provided string | | equalsTo | Will match using equals | | matchUrl | Defines a matcher for URLs, given the base URL path and a sequence of path fragments. The path fragments could be strings or regular expression matchers | _\* Note:_ JSON only supports double precision floating point values. Depending on the language implementation, they may parsed as integer, floating point or decimal numbers. #### Ensuring all items in a list match an example (2.2.0+) Lots of the time you might not know the number of items that will be in a list, but you want to ensure that the list has a minimum or maximum size and that each item in the list matches a given example. You can do this with the `arrayLike`, `minArrayLike` and `maxArrayLike` functions. | function | description | |----------|-------------| | `eachLike` | Ensure that each item in the list matches the provided example | | `maxArrayLike` | Ensure that each item in the list matches the provided example and the list is no bigger than the provided max | | `minArrayLike` | Ensure that each item in the list matches the provided example and the list is no smaller than the provided min | For example: ```java DslPart body = new PactDslJsonBody() .minArrayLike("users") .id() .stringType("name") .closeObject() .closeArray(); ``` This will ensure that the users list is never empty and that each user has an identifier that is a number and a name that is a string. #### Matching JSON values at the root (Version 3.2.2/2.4.3+) For cases where you are expecting basic JSON values (strings, numbers, booleans and null) at the root level of the body and need to use matchers, you can use the `PactDslJsonRootValue` class. It has all the DSL matching methods for basic values that you can use. For example: ```java .consumer("Some Consumer") .hasPactWith("Some Provider") .uponReceiving("a request for a basic JSON value") .path("/hello") .willRespondWith() .status(200) .body(PactDslJsonRootValue.integerType()) ``` #### Root level arrays that match all items (version 2.2.11+) If the root of the body is an array, you can create PactDslJsonArray classes with the following methods: | function | description | |----------|-------------| | `arrayEachLike` | Ensure that each item in the list matches the provided example | | `arrayMinLike` | Ensure that each item in the list matches the provided example and the list is no bigger than the provided max | | `arrayMaxLike` | Ensure that each item in the list matches the provided example and the list is no smaller than the provided min | For example: ```java PactDslJsonArray.arrayEachLike() .date("clearedDate", "mm/dd/yyyy", date) .stringType("status", "STATUS") .decimalType("amount", 100.0) .closeObject() ``` This will then match a body like: ```json [ { "clearedDate" : "07/22/2015", "status" : "C", "amount" : 15.0 }, { "clearedDate" : "07/22/2015", "status" : "C", "amount" : 15.0 }, { "clearedDate" : "07/22/2015", "status" : "C", "amount" : 15.0 } ] ``` #### Matching arrays of arrays (version 3.2.12/2.4.14+) For the case where you have arrays of arrays (GeoJSON is an example), the following methods have been provided: | function | description | |----------|-------------| | `eachArrayLike` | Ensure that each item in the array is an array that matches the provided example | | `eachArrayWithMaxLike` | Ensure that each item in the array is an array that matches the provided example and the array is no bigger than the provided max | | `eachArrayWithMinLike` | Ensure that each item in the array is an array that matches the provided example and the array is no smaller than the provided min | For example (with GeoJSON structure): ```java new PactDslJsonBody() .stringType("type","FeatureCollection") .eachLike("features") .stringType("type","Feature") .object("geometry") .stringType("type","Point") .eachArrayLike("coordinates") // coordinates is an array of arrays .decimalType(-7.55717) .decimalType(49.766896) .closeArray() .closeArray() .closeObject() .object("properties") .stringType("prop0","value0") .closeObject() .closeObject() .closeArray() ``` This generated the following JSON: ```json { "features": [ { "geometry": { "coordinates": [[-7.55717, 49.766896]], "type": "Point" }, "type": "Feature", "properties": { "prop0": "value0" } } ], "type": "FeatureCollection" } ``` and will be able to match all coordinates regardless of the number of coordinates. #### Matching any key in a map (3.3.1/2.5.0+) The DSL has been extended for cases where the keys in a map are IDs. For an example of this, see [#313](https://github.com/DiUS/pact-jvm/issues/313). In this case you can use the `eachKeyLike` method, which takes an example key as a parameter. For example: ```java DslPart body = new PactDslJsonBody() .object("one") .eachKeyLike("001", PactDslJsonRootValue.id(12345L)) // key like an id mapped to a matcher .closeObject() .object("two") .eachKeyLike("001-A") // key like an id where the value is matched by the following example .stringType("description", "Some Description") .closeObject() .closeObject() .object("three") .eachKeyMappedToAnArrayLike("001") // key like an id mapped to an array where each item is matched by the following example .id("someId", 23456L) .closeObject() .closeArray() .closeObject(); ``` For an example, have a look at [WildcardKeysTest](../pact-jvm-consumer-junit/src/test/java/au/com/dius/pact/consumer/WildcardKeysTest.java). **NOTE:** The `eachKeyLike` method adds a `*` to the matching path, so the matching definition will be applied to all keys of the map if there is not a more specific matcher defined for a particular key. Having more than one `eachKeyLike` condition applied to a map will result in only one being applied when the pact is verified (probably the last). **Further Note: From version 3.5.22 onwards pacts with wildcards applied to map keys will require the Java system property "pact.matching.wildcard" set to value "true" when the pact file is verified.** ### Matching on paths (version 2.1.5+) You can use regular expressions to match incoming requests. The DSL has a `matchPath` method for this. You can provide a real path as a second value to use when generating requests, and if you leave it out it will generate a random one from the regular expression. For example: ```java .given("test state") .uponReceiving("a test interaction") .matchPath("/transaction/[0-9]+") // or .matchPath("/transaction/[0-9]+", "/transaction/1234567890") .method("POST") .body("{\"name\": \"harry\"}") .willRespondWith() .status(200) .body("{\"hello\": \"harry\"}") ``` ### Matching on headers (version 2.2.2+) You can use regular expressions to match request and response headers. The DSL has a `matchHeader` method for this. You can provide an example header value to use when generating requests and responses, and if you leave it out it will generate a random one from the regular expression. For example: ```java .given("test state") .uponReceiving("a test interaction") .path("/hello") .method("POST") .matchHeader("testreqheader", "test.*value") .body("{\"name\": \"harry\"}") .willRespondWith() .status(200) .body("{\"hello\": \"harry\"}") .matchHeader("Location", ".*/hello/[0-9]+", "/hello/1234") ``` ### Matching on query parameters (version 3.3.7+) You can use regular expressions to match request query parameters. The DSL has a `matchQuery` method for this. You can provide an example value to use when generating requests, and if you leave it out it will generate a random one from the regular expression. For example: ```java .given("test state") .uponReceiving("a test interaction") .path("/hello") .method("POST") .matchQuery("a", "\\d+", "100") .matchQuery("b", "[A-Z]", "X") .body("{\"name\": \"harry\"}") .willRespondWith() .status(200) .body("{\"hello\": \"harry\"}") ``` # Forcing pact files to be overwritten (3.6.5+) By default, when the pact file is written, it will be merged with any existing pact file. To force the file to be overwritten, set the Java system property `pact.writer.overwrite` to `true`. # Having values injected from provider state callbacks (3.6.11+) You can have values from the provider state callbacks be injected into most places (paths, query parameters, headers, bodies, etc.). This works by using the V3 spec generators with provider state callbacks that return values. One example of where this would be useful is API calls that require an ID which would be auto-generated by the database on the provider side, so there is no way to know what the ID would be beforehand. The following DSL methods allow you to set an expression that will be parsed with the values returned from the provider states: For JSON bodies, use `valueFromProviderState`.<br/> For headers, use `headerFromProviderState`.<br/> For query parameters, use `queryParameterFromProviderState`.<br/> For paths, use `pathFromProviderState`. For example, assume that an API call is made to get the details of a user by ID. A provider state can be defined that specifies that the user must be exist, but the ID will be created when the user is created. So we can then define an expression for the path where the ID will be replaced with the value returned from the provider state callback. ```java .pathFromProviderState("/api/users/${id}", "/api/users/100") ``` You can also just use the key instead of an expression: ```java .valueFromProviderState('userId', 'userId', 100) // will look value using userId as the key ```