ca.uhn.hl7v2.model.primitive.CommonTM Maven / Gradle / Ivy
/**
* The contents of this file are subject to the Mozilla Public License Version 1.1
* (the "License"); you may not use this file except in compliance with the License.
* You may obtain a copy of the License at http://www.mozilla.org/MPL/
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the
* specific language governing rights and limitations under the License.
*
* The Original Code is "CommmonTM.java". Description:
* "Note: The class description below has been excerpted from the Hl7 2.4 documentation"
*
* The Initial Developer of the Original Code is University Health Network. Copyright (C)
* 2001. All Rights Reserved.
*
* Contributor(s): ______________________________________.
*
* Alternatively, the contents of this file may be used under the terms of the
* GNU General Public License (the "GPL"), in which case the provisions of the GPL are
* applicable instead of those above. If you wish to allow use of your version of this
* file only under the terms of the GPL and not to allow others to use your version
* of this file under the MPL, indicate your decision by deleting the provisions above
* and replace them with the notice and other provisions required by the GPL License.
* If you do not delete the provisions above, a recipient may use your version of
* this file under either the MPL or the GPL.
*
*/
package ca.uhn.hl7v2.model.primitive;
import java.util.Calendar;
import java.util.Date;
import java.util.GregorianCalendar;
import java.util.TimeZone;
import java.io.Serializable;
import ca.uhn.hl7v2.model.DataTypeException;
import ca.uhn.hl7v2.model.DataTypeUtil;
/**
* This class contains functionality used by the TM class
* in the version 2.3.0, 2.3.1, and 2.4 packages
*
* Note: The class description below has been excerpted from the Hl7 2.4 documentation. Sectional
* references made below also refer to the same documentation.
*
* Format: HH[MM[SS[.S[S[S[S]]]]]][+/-ZZZZ]
* In prior versions of HL7, this data type was always specified to be in the
* format HHMM[SS[.SSSS]][+/-ZZZZ] using a 24 hour clock notation. In the
* current and future versions, the precision of a time may be expressed by
* limiting the number of digits used with the format specification as shown
* above. By site-specific agreement, HHMM[SS[.SSSS]][+/-ZZZZ] may be used where
* backward compatibility must be maintained.
* Thus, HH is used to specify a precision of "hour," HHMM is used to specify a
* precision of "minute," HHMMSS is used to specify a precision of seconds, and
* HHMMSS.SSSS is used to specify a precision of ten-thousandths of a second.
* In each of these cases, the time zone is an optional component. The fractional
* seconds could be sent by a transmitter who requires greater precision than whole
* seconds. Fractional representations of minutes, hours or other higher-order units
* of time are not permitted.
* Note: The time zone [+/-ZZZZ], when used, is restricted to legally-defined time zones
* and is represented in HHMM format.
* The time zone of the sender may be sent optionally as an offset from the coordinated
* universal time (previously known as Greenwich Mean Time). Where the time zone
* is not present in a particular TM field but is included as part of the date/time
* field in the MSH segment, the MSH value will be used as the default time zone.
* Otherwise, the time is understood to refer to the local time of the sender.
* Midnight is represented as 0000.
* Examples:|235959+1100| 1 second before midnight in a time zone eleven hours
* ahead of Universal Coordinated Time (i.e., east of Greenwich).
* |0800| Eight AM, local time of the sender.
* |093544.2312| 44.2312 seconds after Nine thirty-five AM, local time of sender.
* |13| 1pm (with a precision of hours), local time of sender.
* @author Neal Acharya
*/
@SuppressWarnings("serial")
public class CommonTM implements Serializable {
/**
* Value returned by {@link #getGMTOffset()} if no offset is set
*/
public static final int GMT_OFFSET_NOT_SET_VALUE = -99;
private String value;
private int hour;
private int minute;
private int second;
private float fractionOfSec;
private int offSet;
private boolean omitOffsetFg = false;
/**
* Constructs a TM datatype with fields initialzed to zero and the value set to
* null.
*/
public CommonTM() {
//initialize all DT fields
value = null;
hour = 0;
minute = 0;
second = 0;
fractionOfSec = 0;
offSet = GMT_OFFSET_NOT_SET_VALUE;
} //end constructor
/**
* Constructs a TM object with the given value.
* The stored value will be in the following
* format HH[MM[SS[.S[S[S[S]]]]]][+/-ZZZZ].
*/
public CommonTM(String val) throws DataTypeException {
this.setValue(val);
} //end constructor
/**
* This method takes in a string HL7 Time value and performs validations
* then sets the value field. The stored value will be in the following
* format HH[MM[SS[.S[S[S[S]]]]]][+/-ZZZZ].
* Note: Trailing zeros supplied in the time value (HH[MM[SS[.S[S[S[S]]]]]])
* and GMT offset ([+/-ZZZZ]) will be preserved.
* Note: If the GMT offset is not supplied then the local
* time zone (using standard time zone format which is not modified for daylight savings)
* will be stored as a default. Passing in null clears any existing value.
*/
public void setValue(String val) throws DataTypeException {
if (val != null && !val.equals("") && !val.equals("\"\"")) {
//check to see if any of the following characters exist: "." or "+/-"
//this will help us determine the acceptable lengths
int d = val.indexOf(".");
int sp = val.indexOf("+");
int sm = val.indexOf("-");
int indexOfSign = -1;
boolean offsetExists = false;
if ((sp != -1) || (sm != -1))
offsetExists = true;
if (sp != -1)
indexOfSign = sp;
if (sm != -1)
indexOfSign = sm;
try {
//If the GMT offset exists then extract it from the input string and store it
//in another variable called tempOffset. Also, store the time value
//(without the offset)in a separate variable called timeVal.
//If there is no GMT offset then simply set timeVal to val.
String timeVal = val;
String tempOffset = null;
if (offsetExists) {
timeVal = val.substring(0, indexOfSign);
tempOffset = val.substring(indexOfSign);
} //end if
if (offsetExists && (tempOffset.length() != 5)) {
//The length of the GMT offset must be 5 characters (including the sign)
String msg =
"The length of the TM datatype value does not conform to an allowable"
+ " format. Format should conform to HH[MM[SS[.S[S[S[S]]]]]][+/-ZZZZ]";
DataTypeException e = new DataTypeException(msg);
throw e;
} //end if
if (d != -1) {
//here we know that decimal exists
//thus length of the time value can be between 8 and 11 characters
if ((timeVal.length() < 8) || (timeVal.length() > 11)) {
String msg =
"The length of the TM datatype value does not conform to an allowable"
+ " format. Format should conform to HH[MM[SS[.S[S[S[S]]]]]][+/-ZZZZ]";
DataTypeException e = new DataTypeException(msg);
throw e;
} //end if
} //end if
if (d == -1) {
//here we know that the decimal does not exist
//thus length of the time value can be 2 or 4 or 6 characters
if ((timeVal.length() != 2) && (timeVal.length() != 4) && (timeVal.length() != 6)) {
String msg =
"The length of the TM datatype value does not conform to an allowable"
+ " format. Format should conform to HH[MM[SS[.S[S[S[S]]]]]][+/-ZZZZ]";
DataTypeException e = new DataTypeException(msg);
throw e;
} //end if
} //end if
//We will now try to validate the timeVal portion of the TM datatype value
if (timeVal.length() >= 2) {
//extract the hour data from the input value. If the first 2 characters
//are not numeric then a number format exception will be generated
int hrInt = Integer.parseInt(timeVal.substring(0, 2));
//check to see if the hour value is valid
if ((hrInt < 0) || (hrInt > 23)) {
String msg = "The hour value of the TM datatype must be >=0 and <=23";
DataTypeException e = new DataTypeException(msg);
throw e;
} //end if
hour = hrInt;
} //end if
if (timeVal.length() >= 4) {
//extract the minute data from the input value
//If these characters are not numeric then a number
//format exception will be generated
int minInt = Integer.parseInt(timeVal.substring(2, 4));
//check to see if the minute value is valid
if ((minInt < 0) || (minInt > 59)) {
String msg = "The minute value of the TM datatype must be >=0 and <=59";
DataTypeException e = new DataTypeException(msg);
throw e;
} //end if
minute = minInt;
} //end if
if (timeVal.length() >= 6) {
//extract the seconds data from the input value
//If these characters are not numeric then a number
//format exception will be generated
int secInt = Integer.parseInt(timeVal.substring(4, 6));
//check to see if the seconds value is valid
if ((secInt < 0) || (secInt > 59)) {
String msg = "The seconds value of the TM datatype must be >=0 and <=59";
DataTypeException e = new DataTypeException(msg);
throw e;
} //end if
second = secInt;
} //end if
if (timeVal.length() >= 8) {
//extract the fractional second value from the input value
//If these characters are not numeric then a number
//format exception will be generated
float fract = Float.parseFloat(timeVal.substring(6));
//check to see if the fractional second value is valid
if ((fract < 0) || (fract >= 1)) {
String msg = "The fractional second value of the TM datatype must be >= 0 and < 1";
DataTypeException e = new DataTypeException(msg);
throw e;
} //end if
fractionOfSec = fract;
} //end if
//We will now try to validate the tempOffset portion of the TM datatype value
if (offsetExists) {
//in case the offset are a series of zeros we should not omit displaying
//it in the return value from the getValue() method
omitOffsetFg = false;
//remove the sign from the temp offset
String tempOffsetNoS = tempOffset.substring(1);
//extract the hour data from the offset value. If the first 2 characters
//are not numeric then a number format exception will be generated
int offsetInt = Integer.parseInt(tempOffsetNoS.substring(0, 2));
//check to see if the hour value is valid
if ((offsetInt < 0) || (offsetInt > 23)) {
String msg = "The GMT offset hour value of the TM datatype must be >=0 and <=23";
DataTypeException e = new DataTypeException(msg);
throw e;
} //end if
//extract the minute data from the offset value. If these characters
//are not numeric then a number format exception will be generated
offsetInt = Integer.parseInt(tempOffsetNoS.substring(2, 4));
//check to see if the minute value is valid
if ((offsetInt < 0) || (offsetInt > 59)) {
String msg = "The GMT offset minute value of the TM datatype must be >=0 and <=59";
DataTypeException e = new DataTypeException(msg);
throw e;
} //end if
//validation done, update the offSet field
offSet = Integer.parseInt(tempOffsetNoS);
//add the sign back to the offset if it is negative
if (sm != -1) {
offSet = -1 * offSet;
} //end if
} //end if
//If the GMT offset has not been supplied then set the offset to the
//local timezone
//[Bryan: changing this to omit time zone because erroneous if parser in different zone than sender]
if (!offsetExists) {
omitOffsetFg = true;
// set the offSet field to the current time and local time zone
//offSet = DataTypeUtil.getLocalGMTOffset();
} //end if
//validations are now done store the time value into the private value field
value = timeVal;
} //end try
catch (DataTypeException e) {
throw e;
} //end catch
catch (Exception e) {
throw new DataTypeException(e);
} //end catch
} //end if
else {
//set the private value field to null or empty space.
value = val;
} //end else
} //end method
/**
* This method takes in an integer value for the hour and performs validations,
* it then sets the value field formatted as an HL7 time
* value with hour precision (HH).
*/
public void setHourPrecision(int hr) throws DataTypeException {
try {
//validate input value
if ((hr < 0) || (hr > 23)) {
String msg = "The hour value of the TM datatype must be >=0 and <=23";
DataTypeException e = new DataTypeException(msg);
throw e;
} //end if
hour = hr;
minute = 0;
second = 0;
fractionOfSec = 0;
offSet = 0;
//Here the offset is not defined, we should omit showing it in the
//return value from the getValue() method
omitOffsetFg = true;
value = DataTypeUtil.preAppendZeroes(hr, 2);
} //end try
catch (DataTypeException e) {
throw e;
} //end catch
catch (Exception e) {
throw new DataTypeException(e.getMessage());
} //end catch
} //end method
/**
* This method takes in integer values for the hour and minute and performs validations,
* it then sets the value field formatted as an HL7 time value
* with hour&minute precision (HHMM).
*/
public void setHourMinutePrecision(int hr, int min) throws DataTypeException {
try {
this.setHourPrecision(hr);
//validate input minute value
if ((min < 0) || (min > 59)) {
String msg = "The minute value of the TM datatype must be >=0 and <=59";
DataTypeException e = new DataTypeException(msg);
throw e;
} //end if
minute = min;
second = 0;
fractionOfSec = 0;
offSet = 0;
//Here the offset is not defined, we should omit showing it in the
//return value from the getValue() method
omitOffsetFg = true;
value = value + DataTypeUtil.preAppendZeroes(min, 2);
} //end try
catch (DataTypeException e) {
throw e;
} //end catch
catch (Exception e) {
throw new DataTypeException(e.getMessage());
} //end catch
} //end method
/**
* This method takes in integer values for the hour, minute, seconds, and fractional seconds
* (going to the tenthousandths precision).
* The method performs validations and then sets the value field formatted as an
* HL7 time value with a precision that starts from the hour and goes down to the tenthousandths
* of a second (HHMMSS.SSSS).
* Note: all of the precisions from tenths down to tenthousandths of a
* second are optional. If the precision goes below tenthousandths of a second then the second
* value will be rounded to the nearest tenthousandths of a second.
*/
public void setHourMinSecondPrecision(int hr, int min, float sec) throws DataTypeException {
try {
this.setHourMinutePrecision(hr, min);
//multiply the seconds input value by 10000 and round the result
//then divide the number by tenthousand and store it back.
//This will round the fractional seconds to the nearest tenthousandths
int secMultRound = Math.round(10000F * sec);
sec = secMultRound / 10000F;
//Now store the second and fractional component
second = (int) Math.floor(sec);
//validate input seconds value
if ((second < 0) || (second >= 60)) {
String msg = "The (rounded) second value of the TM datatype must be >=0 and <60";
DataTypeException e = new DataTypeException(msg);
throw e;
} //end if
int fractionOfSecInt = (int) (secMultRound - (second * 10000));
fractionOfSec = fractionOfSecInt / 10000F;
String fractString = "";
//Now convert the fractionOfSec field to a string without the leading zero
if (fractionOfSec != 0.0F) {
fractString = (Float.toString(fractionOfSec)).substring(1);
} //end if
//Now update the value field
offSet = 0;
//Here the offset is not defined, we should omit showing it in the
//return value from the getValue() method
omitOffsetFg = true;
value = value + DataTypeUtil.preAppendZeroes(second, 2) + fractString;
} //end try
catch (DataTypeException e) {
throw e;
} //end catch
catch (Exception e) {
throw new DataTypeException(e);
} //end catch
} //end method
/**
* This method takes in the four digit (signed) GMT offset and sets the offset
* field
*/
public void setOffset(int signedOffset) throws DataTypeException {
try {
//When this function is called an offset is being created/updated
//we should not omit displaying it in the return value from
//the getValue() method
omitOffsetFg = false;
String offsetStr = Integer.toString(signedOffset);
if ((signedOffset >= 0 && offsetStr.length() > 4) || (signedOffset < 0 && offsetStr.length() > 5)) {
//The length of the GMT offset must be no greater than 5 characters (including the sign)
String msg =
"The length of the GMT offset for the TM datatype value does"
+ " not conform to the allowable format [+/-ZZZZ]. Value: " + signedOffset;
DataTypeException e = new DataTypeException(msg);
throw e;
} //end if
//obtain the absolute value of the input
int absOffset = Math.abs(signedOffset);
//extract the hour data from the offset value.
//first preappend zeros so we have a 4 char offset value (without sign)
offsetStr = DataTypeUtil.preAppendZeroes(absOffset, 4);
int hrOffsetInt = Integer.parseInt(offsetStr.substring(0, 2));
//check to see if the hour value is valid
if ((hrOffsetInt < 0) || (hrOffsetInt > 23)) {
String msg = "The GMT offset hour value of the TM datatype must be >=0 and <=23";
DataTypeException e = new DataTypeException(msg);
throw e;
} //end if
//extract the minute data from the offset value.
int minOffsetInt = Integer.parseInt(offsetStr.substring(2, 4));
//check to see if the minute value is valid
if ((minOffsetInt < 0) || (minOffsetInt > 59)) {
String msg = "The GMT offset minute value of the TM datatype must be >=0 and <=59";
DataTypeException e = new DataTypeException(msg);
throw e;
} //end if
//The input value is valid, now store it in the offset field
offSet = signedOffset;
} //end try
catch (DataTypeException e) {
throw e;
} //end catch
catch (Exception e) {
throw new DataTypeException(e);
} //end catch
} //end method
/**
* Returns the HL7 TM string value.
*/
public String getValue() {
//combine the value field with the offSet field and return it
String returnVal = null;
if (value != null && !value.equals("")) {
if (omitOffsetFg == false && !value.equals("\"\"")) {
int absOffset = Math.abs(offSet);
String sign = "";
if (offSet >= 0) {
sign = "+";
} //end if
else {
sign = "-";
} //end else
returnVal = value + sign + DataTypeUtil.preAppendZeroes(absOffset, 4);
}
else {
returnVal = value;
} //end else
} //end if
return returnVal;
} //end method
/**
* Convenience setter which sets the value using a {@link Calendar} object. Passing in null clears any existing value.
*
* Note: Sets fields using precision up to the minute
*
* @param theCalendar The calendar object from which to retrieve values
* @since 1.1
*/
public void setValueToMinute(Calendar theCalendar) throws DataTypeException {
if (theCalendar == null) {
setValue((String)null);
return;
}
int hr = theCalendar.get(Calendar.HOUR_OF_DAY);
int min = theCalendar.get(Calendar.MINUTE);
setHourMinutePrecision(hr, min);
}
/**
* Convenience setter which sets the value using a {@link Date} object. Passing in null clears any existing value.
*
* Note: Sets fields using precision up to the minute
* Note: Date is timezone-agnostic, representing always GMT time
*
* @param theDate The date object from which to retrieve values
* @since 1.1
*/
public void setValueToMinute(Date theDate) throws DataTypeException {
if (theDate == null) {
setValue((String)null);
return;
}
Calendar calendar = Calendar.getInstance();
calendar.setTime(theDate);
setValueToMinute(calendar);
}
/**
* Convenience setter which sets the value using a {@link Calendar} object. Passing in null clears any existing value.
*
* Note: Sets fields using precision up to the second
*
* @param theCalendar The calendar object from which to retrieve values
* @since 1.1
*/
public void setValueToSecond(Calendar theCalendar) throws DataTypeException {
if (theCalendar == null) {
setValue((String)null);
return;
}
int hr = theCalendar.get(Calendar.HOUR_OF_DAY);
int min = theCalendar.get(Calendar.MINUTE);
int sec = theCalendar.get(Calendar.SECOND);
setHourMinSecondPrecision(hr, min, sec);
}
/**
* Convenience setter which sets the value using a {@link Calendar} object. Passing in null clears any existing value.
*
* Note: Sets fields using precision up to the millisecond, including timezone offset
*
* @param theCalendar The calendar object from which to retrieve values
* @since 1.1
*/
public void setValue(Calendar theCalendar) throws DataTypeException {
if (theCalendar == null) {
setValue((String)null);
return;
}
int hr = theCalendar.get(Calendar.HOUR_OF_DAY);
int min = theCalendar.get(Calendar.MINUTE);
float sec = theCalendar.get(Calendar.SECOND) + (theCalendar.get(Calendar.MILLISECOND) / 1000.0F);
setHourMinSecondPrecision(hr, min, sec);
// 3410095: care for integer overflow and timezones not at the full hour, e.g. India
int hourOffset= theCalendar.get(Calendar.ZONE_OFFSET) / (1000 * 60 * 60);
int minuteOffset = (theCalendar.get(Calendar.ZONE_OFFSET) / (1000 * 60)) % 60;
int zoneOffset = hourOffset * 100 + minuteOffset;
setOffset(zoneOffset);
}
/**
* Convenience setter which sets the value using a {@link Calendar} object. Passing in null clears any existing value.
*
* Note: Sets fields using precision up to the millisecond, and sets the timezone offset to
* the current system offset
* Note: Date is timezone-agnostic, representing always GMT time
*
* @param theDate The calendar object from which to retrieve values
* @since 1.1
*/
public void setValue(Date theDate) throws DataTypeException {
if (theDate == null) {
setValue((String)null);
return;
}
GregorianCalendar cal = new GregorianCalendar();
cal.setTime(theDate);
setValue(cal);
}
/**
* Convenience setter which sets the value using a {@link Date} object. Passing in null clears any existing value.
*
* Note: Sets fields using precision up to the second
* Note: Date is timezone-agnostic, representing always GMT time
*
* @param theDate The date object from which to retrieve values
* @since 1.1
*/
public void setValueToSecond(Date theDate) throws DataTypeException {
if (theDate == null) {
setValue((String)null);
return;
}
Calendar calendar = Calendar.getInstance();
calendar.setTime(theDate);
setValueToSecond(calendar);
}
/**
* Return the value as a calendar object.
*
* Note that only the time component of the return value is set to
* the value from this object. Returned value will have today's date
* @since 1.1
*/
public Calendar getValueAsCalendar() {
Calendar retVal = Calendar.getInstance();
retVal.set(Calendar.HOUR_OF_DAY, getHour());
retVal.set(Calendar.MINUTE, getMinute());
retVal.set(Calendar.SECOND, getSecond());
float fractSecond = getFractSecond();
retVal.set(Calendar.MILLISECOND, (int) (fractSecond * 1000.0));
int gmtOff = getGMTOffset();
if (gmtOff != GMT_OFFSET_NOT_SET_VALUE && !omitOffsetFg) {
retVal.set(Calendar.ZONE_OFFSET, (gmtOff/100) * (1000 * 60 * 60));
/*
* The following sets the TimeZone associated with the returned calendar
* to use the offset specified in the value if this conflicts with the
* value it already contains.
*
* This is needed in situations where daylight savings is in effect
* during part of the year, and a date is parsed which contains the
* other part of the year (i.e. parsing a DST DateTime when it is not actually
* DST according to the system clock).
*
* See CommonTSTest#testGetCalendarRespectsDaylightSavings() for an example
* which fails if this is removed.
*/
if (retVal.getTimeZone().getRawOffset() != retVal.get(Calendar.ZONE_OFFSET)) {
int hrOffset = gmtOff / 100;
int minOffset = gmtOff % 100;
StringBuilder tzBuilder = new StringBuilder("GMT");
if (hrOffset < 0) {
tzBuilder.append('-');
}
tzBuilder.append(Math.abs(hrOffset));
tzBuilder.append(':');
if (minOffset < 10) {
tzBuilder.append('0');
}
tzBuilder.append(minOffset);
retVal.setTimeZone(TimeZone.getTimeZone(tzBuilder.toString()));
}
}
return retVal;
}
/**
* Return the value as a date object
*
* Note that only the time component of the return value is set to
* the value from this object. Returned value will have today's date
* Note: Date is timezone-agnostic, representing always GMT time
* @since 1.1
*/
public Date getValueAsDate() {
return getValueAsCalendar().getTime();
}
/**
* Returns the hour as an integer.
*/
public int getHour() {
return hour;
} //end method
/**
* Returns the minute as an integer.
*/
public int getMinute() {
return minute;
} //end method
/**
* Returns the second as an integer.
*/
public int getSecond() {
return second;
} //end method
/**
* Returns the fractional second value as a float.
*/
public float getFractSecond() {
return fractionOfSec;
} //end method
/**
* Returns the GMT offset value as an integer, {@link #GMT_OFFSET_NOT_SET_VALUE} if not set.
*/
public int getGMTOffset() {
return offSet;
} //end method
/**
* Returns a string value representing the input Gregorian Calendar object in
* an Hl7 Time Format.
*/
public static String toHl7TMFormat(GregorianCalendar cal) throws DataTypeException {
String val = "";
try {
//set the input cal object so that it can report errors
//on it's value
cal.setLenient(false);
int calHour = cal.get(GregorianCalendar.HOUR_OF_DAY);
int calMin = cal.get(GregorianCalendar.MINUTE);
int calSec = cal.get(GregorianCalendar.SECOND);
int calMilli = cal.get(GregorianCalendar.MILLISECOND);
//the inputs seconds and milli seconds should be combined into a float type
float fractSec = calMilli / 1000F;
float calSecFloat = calSec + fractSec;
int calOffset = cal.get(GregorianCalendar.ZONE_OFFSET) + cal.get(GregorianCalendar.DST_OFFSET);
//Note the input's Offset value is in milliseconds, we must convert it to
//a 4 digit integer in the HL7 Offset format.
int offSetSignInt;
if (calOffset < 0) {
offSetSignInt = -1;
}
else {
offSetSignInt = 1;
}
//get the absolute value of the gmtOffSet
int absGmtOffSet = Math.abs(calOffset);
int gmtOffSetHours = absGmtOffSet / (3600 * 1000);
int gmtOffSetMin = (absGmtOffSet / 60000) % (60);
//reset calOffset
calOffset = ((gmtOffSetHours * 100) + gmtOffSetMin) * offSetSignInt;
//Create an object of the TS class and populate it with the above values
//then return the HL7 string value from the object
CommonTM tm = new CommonTM();
tm.setHourMinSecondPrecision(calHour, calMin, calSecFloat);
tm.setOffset(calOffset);
val = tm.getValue();
} // end try
catch (DataTypeException e) {
throw e;
} //end catch
catch (Exception e) {
throw new DataTypeException(e);
} //end catch
return val;
} //end method
} //end class