ca.uhn.hl7v2.model.v281.segment.SCD Maven / Gradle / Ivy
/*
* This class is an auto-generated source file for a HAPI
* HL7 v2.x standard structure class.
*
* For more information, visit: http://hl7api.sourceforge.net/
*
* The contents of this file are subject to the Mozilla Public License Version 1.1
* (the "License"); you may not use this file except in compliance with the License.
* You may obtain a copy of the License at http://www.mozilla.org/MPL/
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the
* specific language governing rights and limitations under the License.
*
* The Original Code is "[file_name]". Description:
* "[one_line_description]"
*
* The Initial Developer of the Original Code is University Health Network. Copyright (C)
* 2012. All Rights Reserved.
*
* Contributor(s): ______________________________________.
*
* Alternatively, the contents of this file may be used under the terms of the
* GNU General Public License (the "GPL"), in which case the provisions of the GPL are
* applicable instead of those above. If you wish to allow use of your version of this
* file only under the terms of the GPL and not to allow others to use your version
* of this file under the MPL, indicate your decision by deleting the provisions above
* and replace them with the notice and other provisions required by the GPL License.
* If you do not delete the provisions above, a recipient may use your version of
* this file under either the MPL or the GPL.
*
*/
package ca.uhn.hl7v2.model.v281.segment;
// import ca.uhn.hl7v2.model.v281.group.*;
import ca.uhn.hl7v2.model.v281.datatype.*;
import ca.uhn.hl7v2.HL7Exception;
import ca.uhn.hl7v2.parser.ModelClassFactory;
import ca.uhn.hl7v2.parser.DefaultModelClassFactory;
import ca.uhn.hl7v2.model.AbstractMessage;
import ca.uhn.hl7v2.model.Group;
import ca.uhn.hl7v2.model.Type;
import ca.uhn.hl7v2.model.AbstractSegment;
import ca.uhn.hl7v2.model.Varies;
/**
*Represents an HL7 SCD message segment (Anti-Microbial Cycle Data).
* This segment has the following fields:
*
* - SCD-1: Cycle Start Time (TM) optional
*
- SCD-2: Cycle Count (NM) optional
*
- SCD-3: Temp Max (CQ) optional
*
- SCD-4: Temp Min (CQ) optional
*
- SCD-5: Load Number (NM) optional
*
- SCD-6: Condition Time (CQ) optional
*
- SCD-7: Sterilize Time (CQ) optional
*
- SCD-8: Exhaust Time (CQ) optional
*
- SCD-9: Total Cycle Time (CQ) optional
*
- SCD-10: Device Status (CWE) optional
*
- SCD-11: Cycle Start Date/Time (DTM) optional
*
- SCD-12: Dry Time (CQ) optional
*
- SCD-13: Leak Rate (CQ) optional
*
- SCD-14: Control Temperature (CQ) optional
*
- SCD-15: Sterilizer Temperature (CQ) optional
*
- SCD-16: Cycle Complete Time (TM) optional
*
- SCD-17: Under Temperature (CQ) optional
*
- SCD-18: Over Temperature (CQ) optional
*
- SCD-19: Abort Cycle (CNE) optional
*
- SCD-20: Alarm (CNE) optional
*
- SCD-21: Long in Charge Phase (CNE) optional
*
- SCD-22: Long in Exhaust Phase (CNE) optional
*
- SCD-23: Long in Fast Exhaust Phase (CNE) optional
*
- SCD-24: Reset (CNE) optional
*
- SCD-25: Operator - Unload (XCN) optional
*
- SCD-26: Door Open (CNE) optional
*
- SCD-27: Reading Failure (CNE) optional
*
- SCD-28: Cycle Type (CWE) optional
*
- SCD-29: Thermal Rinse Time (CQ) optional
*
- SCD-30: Wash Time (CQ) optional
*
- SCD-31: Injection Rate (CQ) optional
*
- SCD-32: Procedure Code (CNE) optional
*
- SCD-33: Patient Identifier List (CX) optional repeating
*
- SCD-34: Attending Doctor (XCN) optional
*
- SCD-35: Dilution Factor (SN) optional
*
- SCD-36: Fill Time (CQ) optional
*
- SCD-37: Inlet Temperature (CQ) optional
*
*/
@SuppressWarnings("unused")
public class SCD extends AbstractSegment {
/**
* Creates a new SCD segment
*/
public SCD(Group parent, ModelClassFactory factory) {
super(parent, factory);
init(factory);
}
private void init(ModelClassFactory factory) {
try {
this.add(TM.class, false, 1, 0, new Object[]{ getMessage() }, "Cycle Start Time");
this.add(NM.class, false, 1, 0, new Object[]{ getMessage() }, "Cycle Count");
this.add(CQ.class, false, 1, 0, new Object[]{ getMessage() }, "Temp Max");
this.add(CQ.class, false, 1, 0, new Object[]{ getMessage() }, "Temp Min");
this.add(NM.class, false, 1, 0, new Object[]{ getMessage() }, "Load Number");
this.add(CQ.class, false, 1, 0, new Object[]{ getMessage() }, "Condition Time");
this.add(CQ.class, false, 1, 0, new Object[]{ getMessage() }, "Sterilize Time");
this.add(CQ.class, false, 1, 0, new Object[]{ getMessage() }, "Exhaust Time");
this.add(CQ.class, false, 1, 0, new Object[]{ getMessage() }, "Total Cycle Time");
this.add(CWE.class, false, 1, 0, new Object[]{ getMessage() }, "Device Status");
this.add(DTM.class, false, 1, 0, new Object[]{ getMessage() }, "Cycle Start Date/Time");
this.add(CQ.class, false, 1, 0, new Object[]{ getMessage() }, "Dry Time");
this.add(CQ.class, false, 1, 0, new Object[]{ getMessage() }, "Leak Rate");
this.add(CQ.class, false, 1, 0, new Object[]{ getMessage() }, "Control Temperature");
this.add(CQ.class, false, 1, 0, new Object[]{ getMessage() }, "Sterilizer Temperature");
this.add(TM.class, false, 1, 0, new Object[]{ getMessage() }, "Cycle Complete Time");
this.add(CQ.class, false, 1, 0, new Object[]{ getMessage() }, "Under Temperature");
this.add(CQ.class, false, 1, 0, new Object[]{ getMessage() }, "Over Temperature");
this.add(CNE.class, false, 1, 0, new Object[]{ getMessage() }, "Abort Cycle");
this.add(CNE.class, false, 1, 0, new Object[]{ getMessage() }, "Alarm");
this.add(CNE.class, false, 1, 0, new Object[]{ getMessage() }, "Long in Charge Phase");
this.add(CNE.class, false, 1, 0, new Object[]{ getMessage() }, "Long in Exhaust Phase");
this.add(CNE.class, false, 1, 0, new Object[]{ getMessage() }, "Long in Fast Exhaust Phase");
this.add(CNE.class, false, 1, 0, new Object[]{ getMessage() }, "Reset");
this.add(XCN.class, false, 1, 0, new Object[]{ getMessage() }, "Operator - Unload");
this.add(CNE.class, false, 1, 0, new Object[]{ getMessage() }, "Door Open");
this.add(CNE.class, false, 1, 0, new Object[]{ getMessage() }, "Reading Failure");
this.add(CWE.class, false, 1, 0, new Object[]{ getMessage() }, "Cycle Type");
this.add(CQ.class, false, 1, 0, new Object[]{ getMessage() }, "Thermal Rinse Time");
this.add(CQ.class, false, 1, 0, new Object[]{ getMessage() }, "Wash Time");
this.add(CQ.class, false, 1, 0, new Object[]{ getMessage() }, "Injection Rate");
this.add(CNE.class, false, 1, 0, new Object[]{ getMessage() }, "Procedure Code");
this.add(CX.class, false, 0, 0, new Object[]{ getMessage() }, "Patient Identifier List");
this.add(XCN.class, false, 1, 0, new Object[]{ getMessage() }, "Attending Doctor");
this.add(SN.class, false, 1, 0, new Object[]{ getMessage() }, "Dilution Factor");
this.add(CQ.class, false, 1, 0, new Object[]{ getMessage() }, "Fill Time");
this.add(CQ.class, false, 1, 0, new Object[]{ getMessage() }, "Inlet Temperature");
} catch(HL7Exception e) {
log.error("Unexpected error creating SCD - this is probably a bug in the source code generator.", e);
}
}
/**
* Returns
* SCD-1: "Cycle Start Time" - creates it if necessary
*/
public TM getCycleStartTime() {
TM retVal = this.getTypedField(1, 0);
return retVal;
}
/**
* Returns
* SCD-1: "Cycle Start Time" - creates it if necessary
*/
public TM getScd1_CycleStartTime() {
TM retVal = this.getTypedField(1, 0);
return retVal;
}
/**
* Returns
* SCD-2: "Cycle Count" - creates it if necessary
*/
public NM getCycleCount() {
NM retVal = this.getTypedField(2, 0);
return retVal;
}
/**
* Returns
* SCD-2: "Cycle Count" - creates it if necessary
*/
public NM getScd2_CycleCount() {
NM retVal = this.getTypedField(2, 0);
return retVal;
}
/**
* Returns
* SCD-3: "Temp Max" - creates it if necessary
*/
public CQ getTempMax() {
CQ retVal = this.getTypedField(3, 0);
return retVal;
}
/**
* Returns
* SCD-3: "Temp Max" - creates it if necessary
*/
public CQ getScd3_TempMax() {
CQ retVal = this.getTypedField(3, 0);
return retVal;
}
/**
* Returns
* SCD-4: "Temp Min" - creates it if necessary
*/
public CQ getTempMin() {
CQ retVal = this.getTypedField(4, 0);
return retVal;
}
/**
* Returns
* SCD-4: "Temp Min" - creates it if necessary
*/
public CQ getScd4_TempMin() {
CQ retVal = this.getTypedField(4, 0);
return retVal;
}
/**
* Returns
* SCD-5: "Load Number" - creates it if necessary
*/
public NM getLoadNumber() {
NM retVal = this.getTypedField(5, 0);
return retVal;
}
/**
* Returns
* SCD-5: "Load Number" - creates it if necessary
*/
public NM getScd5_LoadNumber() {
NM retVal = this.getTypedField(5, 0);
return retVal;
}
/**
* Returns
* SCD-6: "Condition Time" - creates it if necessary
*/
public CQ getConditionTime() {
CQ retVal = this.getTypedField(6, 0);
return retVal;
}
/**
* Returns
* SCD-6: "Condition Time" - creates it if necessary
*/
public CQ getScd6_ConditionTime() {
CQ retVal = this.getTypedField(6, 0);
return retVal;
}
/**
* Returns
* SCD-7: "Sterilize Time" - creates it if necessary
*/
public CQ getSterilizeTime() {
CQ retVal = this.getTypedField(7, 0);
return retVal;
}
/**
* Returns
* SCD-7: "Sterilize Time" - creates it if necessary
*/
public CQ getScd7_SterilizeTime() {
CQ retVal = this.getTypedField(7, 0);
return retVal;
}
/**
* Returns
* SCD-8: "Exhaust Time" - creates it if necessary
*/
public CQ getExhaustTime() {
CQ retVal = this.getTypedField(8, 0);
return retVal;
}
/**
* Returns
* SCD-8: "Exhaust Time" - creates it if necessary
*/
public CQ getScd8_ExhaustTime() {
CQ retVal = this.getTypedField(8, 0);
return retVal;
}
/**
* Returns
* SCD-9: "Total Cycle Time" - creates it if necessary
*/
public CQ getTotalCycleTime() {
CQ retVal = this.getTypedField(9, 0);
return retVal;
}
/**
* Returns
* SCD-9: "Total Cycle Time" - creates it if necessary
*/
public CQ getScd9_TotalCycleTime() {
CQ retVal = this.getTypedField(9, 0);
return retVal;
}
/**
* Returns
* SCD-10: "Device Status" - creates it if necessary
*/
public CWE getDeviceStatus() {
CWE retVal = this.getTypedField(10, 0);
return retVal;
}
/**
* Returns
* SCD-10: "Device Status" - creates it if necessary
*/
public CWE getScd10_DeviceStatus() {
CWE retVal = this.getTypedField(10, 0);
return retVal;
}
/**
* Returns
* SCD-11: "Cycle Start Date/Time" - creates it if necessary
*/
public DTM getCycleStartDateTime() {
DTM retVal = this.getTypedField(11, 0);
return retVal;
}
/**
* Returns
* SCD-11: "Cycle Start Date/Time" - creates it if necessary
*/
public DTM getScd11_CycleStartDateTime() {
DTM retVal = this.getTypedField(11, 0);
return retVal;
}
/**
* Returns
* SCD-12: "Dry Time" - creates it if necessary
*/
public CQ getDryTime() {
CQ retVal = this.getTypedField(12, 0);
return retVal;
}
/**
* Returns
* SCD-12: "Dry Time" - creates it if necessary
*/
public CQ getScd12_DryTime() {
CQ retVal = this.getTypedField(12, 0);
return retVal;
}
/**
* Returns
* SCD-13: "Leak Rate" - creates it if necessary
*/
public CQ getLeakRate() {
CQ retVal = this.getTypedField(13, 0);
return retVal;
}
/**
* Returns
* SCD-13: "Leak Rate" - creates it if necessary
*/
public CQ getScd13_LeakRate() {
CQ retVal = this.getTypedField(13, 0);
return retVal;
}
/**
* Returns
* SCD-14: "Control Temperature" - creates it if necessary
*/
public CQ getControlTemperature() {
CQ retVal = this.getTypedField(14, 0);
return retVal;
}
/**
* Returns
* SCD-14: "Control Temperature" - creates it if necessary
*/
public CQ getScd14_ControlTemperature() {
CQ retVal = this.getTypedField(14, 0);
return retVal;
}
/**
* Returns
* SCD-15: "Sterilizer Temperature" - creates it if necessary
*/
public CQ getSterilizerTemperature() {
CQ retVal = this.getTypedField(15, 0);
return retVal;
}
/**
* Returns
* SCD-15: "Sterilizer Temperature" - creates it if necessary
*/
public CQ getScd15_SterilizerTemperature() {
CQ retVal = this.getTypedField(15, 0);
return retVal;
}
/**
* Returns
* SCD-16: "Cycle Complete Time" - creates it if necessary
*/
public TM getCycleCompleteTime() {
TM retVal = this.getTypedField(16, 0);
return retVal;
}
/**
* Returns
* SCD-16: "Cycle Complete Time" - creates it if necessary
*/
public TM getScd16_CycleCompleteTime() {
TM retVal = this.getTypedField(16, 0);
return retVal;
}
/**
* Returns
* SCD-17: "Under Temperature" - creates it if necessary
*/
public CQ getUnderTemperature() {
CQ retVal = this.getTypedField(17, 0);
return retVal;
}
/**
* Returns
* SCD-17: "Under Temperature" - creates it if necessary
*/
public CQ getScd17_UnderTemperature() {
CQ retVal = this.getTypedField(17, 0);
return retVal;
}
/**
* Returns
* SCD-18: "Over Temperature" - creates it if necessary
*/
public CQ getOverTemperature() {
CQ retVal = this.getTypedField(18, 0);
return retVal;
}
/**
* Returns
* SCD-18: "Over Temperature" - creates it if necessary
*/
public CQ getScd18_OverTemperature() {
CQ retVal = this.getTypedField(18, 0);
return retVal;
}
/**
* Returns
* SCD-19: "Abort Cycle" - creates it if necessary
*/
public CNE getAbortCycle() {
CNE retVal = this.getTypedField(19, 0);
return retVal;
}
/**
* Returns
* SCD-19: "Abort Cycle" - creates it if necessary
*/
public CNE getScd19_AbortCycle() {
CNE retVal = this.getTypedField(19, 0);
return retVal;
}
/**
* Returns
* SCD-20: "Alarm" - creates it if necessary
*/
public CNE getAlarm() {
CNE retVal = this.getTypedField(20, 0);
return retVal;
}
/**
* Returns
* SCD-20: "Alarm" - creates it if necessary
*/
public CNE getScd20_Alarm() {
CNE retVal = this.getTypedField(20, 0);
return retVal;
}
/**
* Returns
* SCD-21: "Long in Charge Phase" - creates it if necessary
*/
public CNE getLongInChargePhase() {
CNE retVal = this.getTypedField(21, 0);
return retVal;
}
/**
* Returns
* SCD-21: "Long in Charge Phase" - creates it if necessary
*/
public CNE getScd21_LongInChargePhase() {
CNE retVal = this.getTypedField(21, 0);
return retVal;
}
/**
* Returns
* SCD-22: "Long in Exhaust Phase" - creates it if necessary
*/
public CNE getLongInExhaustPhase() {
CNE retVal = this.getTypedField(22, 0);
return retVal;
}
/**
* Returns
* SCD-22: "Long in Exhaust Phase" - creates it if necessary
*/
public CNE getScd22_LongInExhaustPhase() {
CNE retVal = this.getTypedField(22, 0);
return retVal;
}
/**
* Returns
* SCD-23: "Long in Fast Exhaust Phase" - creates it if necessary
*/
public CNE getLongInFastExhaustPhase() {
CNE retVal = this.getTypedField(23, 0);
return retVal;
}
/**
* Returns
* SCD-23: "Long in Fast Exhaust Phase" - creates it if necessary
*/
public CNE getScd23_LongInFastExhaustPhase() {
CNE retVal = this.getTypedField(23, 0);
return retVal;
}
/**
* Returns
* SCD-24: "Reset" - creates it if necessary
*/
public CNE getReset() {
CNE retVal = this.getTypedField(24, 0);
return retVal;
}
/**
* Returns
* SCD-24: "Reset" - creates it if necessary
*/
public CNE getScd24_Reset() {
CNE retVal = this.getTypedField(24, 0);
return retVal;
}
/**
* Returns
* SCD-25: "Operator - Unload" - creates it if necessary
*/
public XCN getOperatorUnload() {
XCN retVal = this.getTypedField(25, 0);
return retVal;
}
/**
* Returns
* SCD-25: "Operator - Unload" - creates it if necessary
*/
public XCN getScd25_OperatorUnload() {
XCN retVal = this.getTypedField(25, 0);
return retVal;
}
/**
* Returns
* SCD-26: "Door Open" - creates it if necessary
*/
public CNE getDoorOpen() {
CNE retVal = this.getTypedField(26, 0);
return retVal;
}
/**
* Returns
* SCD-26: "Door Open" - creates it if necessary
*/
public CNE getScd26_DoorOpen() {
CNE retVal = this.getTypedField(26, 0);
return retVal;
}
/**
* Returns
* SCD-27: "Reading Failure" - creates it if necessary
*/
public CNE getReadingFailure() {
CNE retVal = this.getTypedField(27, 0);
return retVal;
}
/**
* Returns
* SCD-27: "Reading Failure" - creates it if necessary
*/
public CNE getScd27_ReadingFailure() {
CNE retVal = this.getTypedField(27, 0);
return retVal;
}
/**
* Returns
* SCD-28: "Cycle Type" - creates it if necessary
*/
public CWE getCycleType() {
CWE retVal = this.getTypedField(28, 0);
return retVal;
}
/**
* Returns
* SCD-28: "Cycle Type" - creates it if necessary
*/
public CWE getScd28_CycleType() {
CWE retVal = this.getTypedField(28, 0);
return retVal;
}
/**
* Returns
* SCD-29: "Thermal Rinse Time" - creates it if necessary
*/
public CQ getThermalRinseTime() {
CQ retVal = this.getTypedField(29, 0);
return retVal;
}
/**
* Returns
* SCD-29: "Thermal Rinse Time" - creates it if necessary
*/
public CQ getScd29_ThermalRinseTime() {
CQ retVal = this.getTypedField(29, 0);
return retVal;
}
/**
* Returns
* SCD-30: "Wash Time" - creates it if necessary
*/
public CQ getWashTime() {
CQ retVal = this.getTypedField(30, 0);
return retVal;
}
/**
* Returns
* SCD-30: "Wash Time" - creates it if necessary
*/
public CQ getScd30_WashTime() {
CQ retVal = this.getTypedField(30, 0);
return retVal;
}
/**
* Returns
* SCD-31: "Injection Rate" - creates it if necessary
*/
public CQ getInjectionRate() {
CQ retVal = this.getTypedField(31, 0);
return retVal;
}
/**
* Returns
* SCD-31: "Injection Rate" - creates it if necessary
*/
public CQ getScd31_InjectionRate() {
CQ retVal = this.getTypedField(31, 0);
return retVal;
}
/**
* Returns
* SCD-32: "Procedure Code" - creates it if necessary
*/
public CNE getProcedureCode() {
CNE retVal = this.getTypedField(32, 0);
return retVal;
}
/**
* Returns
* SCD-32: "Procedure Code" - creates it if necessary
*/
public CNE getScd32_ProcedureCode() {
CNE retVal = this.getTypedField(32, 0);
return retVal;
}
/**
* Returns all repetitions of Patient Identifier List (SCD-33).
*/
public CX[] getPatientIdentifierList() {
CX[] retVal = this.getTypedField(33, new CX[0]);
return retVal;
}
/**
* Returns all repetitions of Patient Identifier List (SCD-33).
*/
public CX[] getScd33_PatientIdentifierList() {
CX[] retVal = this.getTypedField(33, new CX[0]);
return retVal;
}
/**
* Returns a count of the current number of repetitions of Patient Identifier List (SCD-33).
* This method does not create a repetition, so if no repetitions have currently been defined or accessed,
* it will return zero.
*/
public int getPatientIdentifierListReps() {
return this.getReps(33);
}
/**
* Returns a specific repetition of
* SCD-33: "Patient Identifier List" - creates it if necessary
*
* @param rep The repetition index (0-indexed)
*/
public CX getPatientIdentifierList(int rep) {
CX retVal = this.getTypedField(33, rep);
return retVal;
}
/**
* Returns a specific repetition of
* SCD-33: "Patient Identifier List" - creates it if necessary
*
* @param rep The repetition index (0-indexed)
*/
public CX getScd33_PatientIdentifierList(int rep) {
CX retVal = this.getTypedField(33, rep);
return retVal;
}
/**
* Returns a count of the current number of repetitions of Patient Identifier List (SCD-33).
* This method does not create a repetition, so if no repetitions have currently been defined or accessed,
* it will return zero.
*/
public int getScd33_PatientIdentifierListReps() {
return this.getReps(33);
}
/**
* Inserts a repetition of
* SCD-33: "Patient Identifier List" at a specific index
*
* @param rep The repetition index (0-indexed)
* @throws HL7Exception If the rep is invalid (below 0, or too high for the allowable repetitions)
*/
public CX insertPatientIdentifierList(int rep) throws HL7Exception {
return (CX) super.insertRepetition(33, rep);
}
/**
* Inserts a repetition of
* SCD-33: "Patient Identifier List" at a specific index
*
* @param rep The repetition index (0-indexed)
* @throws HL7Exception If the rep is invalid (below 0, or too high for the allowable repetitions)
*/
public CX insertScd33_PatientIdentifierList(int rep) throws HL7Exception {
return (CX) super.insertRepetition(33, rep);
}
/**
* Removes a repetition of
* SCD-33: "Patient Identifier List" at a specific index
*
* @param rep The repetition index (0-indexed)
* @throws HL7Exception If the rep is invalid (below 0, or too high for the allowable repetitions)
*/
public CX removePatientIdentifierList(int rep) throws HL7Exception {
return (CX) super.removeRepetition(33, rep);
}
/**
* Removes a repetition of
* SCD-33: "Patient Identifier List" at a specific index
*
* @param rep The repetition index (0-indexed)
* @throws HL7Exception If the rep is invalid (below 0, or too high for the allowable repetitions)
*/
public CX removeScd33_PatientIdentifierList(int rep) throws HL7Exception {
return (CX) super.removeRepetition(33, rep);
}
/**
* Returns
* SCD-34: "Attending Doctor" - creates it if necessary
*/
public XCN getAttendingDoctor() {
XCN retVal = this.getTypedField(34, 0);
return retVal;
}
/**
* Returns
* SCD-34: "Attending Doctor" - creates it if necessary
*/
public XCN getScd34_AttendingDoctor() {
XCN retVal = this.getTypedField(34, 0);
return retVal;
}
/**
* Returns
* SCD-35: "Dilution Factor" - creates it if necessary
*/
public SN getDilutionFactor() {
SN retVal = this.getTypedField(35, 0);
return retVal;
}
/**
* Returns
* SCD-35: "Dilution Factor" - creates it if necessary
*/
public SN getScd35_DilutionFactor() {
SN retVal = this.getTypedField(35, 0);
return retVal;
}
/**
* Returns
* SCD-36: "Fill Time" - creates it if necessary
*/
public CQ getFillTime() {
CQ retVal = this.getTypedField(36, 0);
return retVal;
}
/**
* Returns
* SCD-36: "Fill Time" - creates it if necessary
*/
public CQ getScd36_FillTime() {
CQ retVal = this.getTypedField(36, 0);
return retVal;
}
/**
* Returns
* SCD-37: "Inlet Temperature" - creates it if necessary
*/
public CQ getInletTemperature() {
CQ retVal = this.getTypedField(37, 0);
return retVal;
}
/**
* Returns
* SCD-37: "Inlet Temperature" - creates it if necessary
*/
public CQ getScd37_InletTemperature() {
CQ retVal = this.getTypedField(37, 0);
return retVal;
}
/** {@inheritDoc} */
protected Type createNewTypeWithoutReflection(int field) {
switch (field) {
case 0: return new TM(getMessage());
case 1: return new NM(getMessage());
case 2: return new CQ(getMessage());
case 3: return new CQ(getMessage());
case 4: return new NM(getMessage());
case 5: return new CQ(getMessage());
case 6: return new CQ(getMessage());
case 7: return new CQ(getMessage());
case 8: return new CQ(getMessage());
case 9: return new CWE(getMessage());
case 10: return new DTM(getMessage());
case 11: return new CQ(getMessage());
case 12: return new CQ(getMessage());
case 13: return new CQ(getMessage());
case 14: return new CQ(getMessage());
case 15: return new TM(getMessage());
case 16: return new CQ(getMessage());
case 17: return new CQ(getMessage());
case 18: return new CNE(getMessage());
case 19: return new CNE(getMessage());
case 20: return new CNE(getMessage());
case 21: return new CNE(getMessage());
case 22: return new CNE(getMessage());
case 23: return new CNE(getMessage());
case 24: return new XCN(getMessage());
case 25: return new CNE(getMessage());
case 26: return new CNE(getMessage());
case 27: return new CWE(getMessage());
case 28: return new CQ(getMessage());
case 29: return new CQ(getMessage());
case 30: return new CQ(getMessage());
case 31: return new CNE(getMessage());
case 32: return new CX(getMessage());
case 33: return new XCN(getMessage());
case 34: return new SN(getMessage());
case 35: return new CQ(getMessage());
case 36: return new CQ(getMessage());
default: return null;
}
}
}