org.apache.hadoop.hbase.client.Table Maven / Gradle / Ivy
/**
*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.hadoop.hbase.client;
import java.io.Closeable;
import java.io.IOException;
import java.util.Collections;
import java.util.List;
import java.util.Map;
import java.util.concurrent.TimeUnit;
import org.apache.commons.lang3.NotImplementedException;
import org.apache.hadoop.conf.Configuration;
import org.apache.hadoop.hbase.Cell;
import org.apache.hadoop.hbase.CompareOperator;
import org.apache.hadoop.hbase.HTableDescriptor;
import org.apache.hadoop.hbase.TableName;
import org.apache.hadoop.hbase.io.TimeRange;
import org.apache.yetus.audience.InterfaceAudience;
import org.apache.hadoop.hbase.client.coprocessor.Batch;
import org.apache.hadoop.hbase.filter.CompareFilter;
import org.apache.hadoop.hbase.ipc.CoprocessorRpcChannel;
import org.apache.hadoop.hbase.util.Bytes;
import com.google.protobuf.Descriptors;
import com.google.protobuf.Message;
import com.google.protobuf.Service;
import com.google.protobuf.ServiceException;
/**
* Used to communicate with a single HBase table.
* Obtain an instance from a {@link Connection} and call {@link #close()} afterwards.
*
* Table can be used to get, put, delete or scan data from a table.
* @see ConnectionFactory
* @see Connection
* @see Admin
* @see RegionLocator
* @since 0.99.0
*/
@InterfaceAudience.Public
public interface Table extends Closeable {
/**
* Gets the fully qualified table name instance of this table.
*/
TableName getName();
/**
* Returns the {@link org.apache.hadoop.conf.Configuration} object used by this instance.
*
* The reference returned is not a copy, so any change made to it will
* affect this instance.
*/
Configuration getConfiguration();
/**
* Gets the {@link org.apache.hadoop.hbase.HTableDescriptor table descriptor} for this table.
* @throws java.io.IOException if a remote or network exception occurs.
* @deprecated since 2.0 version and will be removed in 3.0 version.
* use {@link #getDescriptor()}
*/
@Deprecated
default HTableDescriptor getTableDescriptor() throws IOException {
TableDescriptor descriptor = getDescriptor();
if (descriptor instanceof HTableDescriptor) {
return (HTableDescriptor)descriptor;
} else {
return new HTableDescriptor(descriptor);
}
}
/**
* Gets the {@link org.apache.hadoop.hbase.client.TableDescriptor table descriptor} for this table.
* @throws java.io.IOException if a remote or network exception occurs.
*/
TableDescriptor getDescriptor() throws IOException;
/**
* Test for the existence of columns in the table, as specified by the Get.
*
*
* This will return true if the Get matches one or more keys, false if not.
*
*
* This is a server-side call so it prevents any data from being transfered to
* the client.
*
* @param get the Get
* @return true if the specified Get matches one or more keys, false if not
* @throws IOException e
*/
default boolean exists(Get get) throws IOException {
return exists(Collections.singletonList(get))[0];
}
/**
* Test for the existence of columns in the table, as specified by the Gets.
*
*
* This will return an array of booleans. Each value will be true if the related Get matches
* one or more keys, false if not.
*
*
* This is a server-side call so it prevents any data from being transferred to
* the client.
*
* @param gets the Gets
* @return Array of boolean. True if the specified Get matches one or more keys, false if not.
* @throws IOException e
*/
default boolean[] exists(List gets) throws IOException {
throw new NotImplementedException("Add an implementation!");
}
/**
* Test for the existence of columns in the table, as specified by the Gets.
* This will return an array of booleans. Each value will be true if the related Get matches
* one or more keys, false if not.
* This is a server-side call so it prevents any data from being transferred to
* the client.
*
* @param gets the Gets
* @return Array of boolean. True if the specified Get matches one or more keys, false if not.
* @throws IOException e
* @deprecated since 2.0 version and will be removed in 3.0 version.
* use {@link #exists(List)}
*/
@Deprecated
default boolean[] existsAll(List gets) throws IOException {
return exists(gets);
}
/**
* Method that does a batch call on Deletes, Gets, Puts, Increments, Appends, RowMutations.
* The ordering of execution of the actions is not defined. Meaning if you do a Put and a
* Get in the same {@link #batch} call, you will not necessarily be
* guaranteed that the Get returns what the Put had put.
*
* @param actions list of Get, Put, Delete, Increment, Append, RowMutations.
* @param results Empty Object[], same size as actions. Provides access to partial
* results, in case an exception is thrown. A null in the result array means that
* the call for that action failed, even after retries. The order of the objects
* in the results array corresponds to the order of actions in the request list.
* @throws IOException
* @since 0.90.0
*/
default void batch(final List actions, final Object[] results) throws IOException,
InterruptedException {
throw new NotImplementedException("Add an implementation!");
}
/**
* Same as {@link #batch(List, Object[])}, but with a callback.
* @since 0.96.0
*/
default void batchCallback(
final List actions, final Object[] results, final Batch.Callback callback)
throws IOException, InterruptedException {
throw new NotImplementedException("Add an implementation!");
}
/**
* Extracts certain cells from a given row.
* @param get The object that specifies what data to fetch and from which row.
* @return The data coming from the specified row, if it exists. If the row
* specified doesn't exist, the {@link Result} instance returned won't
* contain any {@link org.apache.hadoop.hbase.KeyValue}, as indicated by
* {@link Result#isEmpty()}.
* @throws IOException if a remote or network exception occurs.
* @since 0.20.0
*/
default Result get(Get get) throws IOException {
return get(Collections.singletonList(get))[0];
}
/**
* Extracts specified cells from the given rows, as a batch.
*
* @param gets The objects that specify what data to fetch and from which rows.
* @return The data coming from the specified rows, if it exists. If the row specified doesn't
* exist, the {@link Result} instance returned won't contain any
* {@link org.apache.hadoop.hbase.Cell}s, as indicated by {@link Result#isEmpty()}. If there
* are any failures even after retries, there will be a null in the results' array
* for those Gets, AND an exception will be thrown. The ordering of the Result array
* corresponds to the order of the list of passed in Gets.
* @throws IOException if a remote or network exception occurs.
* @since 0.90.0
* @apiNote {@link #put(List)} runs pre-flight validations on the input list on client.
* Currently {@link #get(List)} doesn't run any validations on the client-side, currently there
* is no need, but this may change in the future. An
* {@link IllegalArgumentException} will be thrown in this case.
*/
default Result[] get(List gets) throws IOException {
throw new NotImplementedException("Add an implementation!");
}
/**
* Returns a scanner on the current table as specified by the {@link Scan}
* object.
* Note that the passed {@link Scan}'s start row and caching properties
* maybe changed.
*
* @param scan A configured {@link Scan} object.
* @return A scanner.
* @throws IOException if a remote or network exception occurs.
* @since 0.20.0
*/
default ResultScanner getScanner(Scan scan) throws IOException {
throw new NotImplementedException("Add an implementation!");
}
/**
* Gets a scanner on the current table for the given family.
*
* @param family The column family to scan.
* @return A scanner.
* @throws IOException if a remote or network exception occurs.
* @since 0.20.0
*/
default ResultScanner getScanner(byte[] family) throws IOException {
throw new NotImplementedException("Add an implementation!");
}
/**
* Gets a scanner on the current table for the given family and qualifier.
*
* @param family The column family to scan.
* @param qualifier The column qualifier to scan.
* @return A scanner.
* @throws IOException if a remote or network exception occurs.
* @since 0.20.0
*/
default ResultScanner getScanner(byte[] family, byte[] qualifier) throws IOException {
throw new NotImplementedException("Add an implementation!");
}
/**
* Puts some data in the table.
*
* @param put The data to put.
* @throws IOException if a remote or network exception occurs.
* @since 0.20.0
*/
default void put(Put put) throws IOException {
put(Collections.singletonList(put));
}
/**
* Batch puts the specified data into the table.
*
* This can be used for group commit, or for submitting user defined batches. Before sending
* a batch of mutations to the server, the client runs a few validations on the input list. If an
* error is found, for example, a mutation was supplied but was missing it's column an
* {@link IllegalArgumentException} will be thrown and no mutations will be applied. If there
* are any failures even after retries, a {@link RetriesExhaustedWithDetailsException} will be
* thrown. RetriesExhaustedWithDetailsException contains lists of failed mutations and
* corresponding remote exceptions. The ordering of mutations and exceptions in the
* encapsulating exception corresponds to the order of the input list of Put requests.
*
* @param puts The list of mutations to apply.
* @throws IOException if a remote or network exception occurs.
* @since 0.20.0
*/
default void put(List puts) throws IOException {
throw new NotImplementedException("Add an implementation!");
}
/**
* Atomically checks if a row/family/qualifier value matches the expected
* value. If it does, it adds the put. If the passed value is null, the check
* is for the lack of column (ie: non-existance)
*
* @param row to check
* @param family column family to check
* @param qualifier column qualifier to check
* @param value the expected value
* @param put data to put if check succeeds
* @throws IOException e
* @return true if the new put was executed, false otherwise
* @deprecated Since 2.0.0. Will be removed in 3.0.0. Use {@link #checkAndMutate(byte[], byte[])}
*/
@Deprecated
default boolean checkAndPut(byte[] row, byte[] family, byte[] qualifier, byte[] value, Put put)
throws IOException {
return checkAndPut(row, family, qualifier, CompareOperator.EQUAL, value, put);
}
/**
* Atomically checks if a row/family/qualifier value matches the expected
* value. If it does, it adds the put. If the passed value is null, the check
* is for the lack of column (ie: non-existence)
*
* The expected value argument of this call is on the left and the current
* value of the cell is on the right side of the comparison operator.
*
* Ie. eg. GREATER operator means expected value > existing <=> add the put.
*
* @param row to check
* @param family column family to check
* @param qualifier column qualifier to check
* @param compareOp comparison operator to use
* @param value the expected value
* @param put data to put if check succeeds
* @throws IOException e
* @return true if the new put was executed, false otherwise
* @deprecated Since 2.0.0. Will be removed in 3.0.0. Use {@link #checkAndMutate(byte[], byte[])}
*/
@Deprecated
default boolean checkAndPut(byte[] row, byte[] family, byte[] qualifier,
CompareFilter.CompareOp compareOp, byte[] value, Put put) throws IOException {
RowMutations mutations = new RowMutations(put.getRow(), 1);
mutations.add(put);
return checkAndMutate(row, family, qualifier, compareOp, value, mutations);
}
/**
* Atomically checks if a row/family/qualifier value matches the expected
* value. If it does, it adds the put. If the passed value is null, the check
* is for the lack of column (ie: non-existence)
*
* The expected value argument of this call is on the left and the current
* value of the cell is on the right side of the comparison operator.
*
* Ie. eg. GREATER operator means expected value > existing <=> add the put.
*
* @param row to check
* @param family column family to check
* @param qualifier column qualifier to check
* @param op comparison operator to use
* @param value the expected value
* @param put data to put if check succeeds
* @throws IOException e
* @return true if the new put was executed, false otherwise
* @deprecated Since 2.0.0. Will be removed in 3.0.0. Use {@link #checkAndMutate(byte[], byte[])}
*/
@Deprecated
default boolean checkAndPut(byte[] row, byte[] family, byte[] qualifier, CompareOperator op,
byte[] value, Put put) throws IOException {
RowMutations mutations = new RowMutations(put.getRow(), 1);
mutations.add(put);
return checkAndMutate(row, family, qualifier, op, value, mutations);
}
/**
* Deletes the specified cells/row.
*
* @param delete The object that specifies what to delete.
* @throws IOException if a remote or network exception occurs.
* @since 0.20.0
*/
default void delete(Delete delete) throws IOException {
throw new NotImplementedException("Add an implementation!");
}
/**
* Batch Deletes the specified cells/rows from the table.
*
* If a specified row does not exist, {@link Delete} will report as though sucessful
* delete; no exception will be thrown. If there are any failures even after retries,
* a {@link RetriesExhaustedWithDetailsException} will be thrown.
* RetriesExhaustedWithDetailsException contains lists of failed {@link Delete}s and
* corresponding remote exceptions.
*
* @param deletes List of things to delete. The input list gets modified by this
* method. All successfully applied {@link Delete}s in the list are removed (in particular it
* gets re-ordered, so the order in which the elements are inserted in the list gives no
* guarantee as to the order in which the {@link Delete}s are executed).
* @throws IOException if a remote or network exception occurs. In that case
* the {@code deletes} argument will contain the {@link Delete} instances
* that have not be successfully applied.
* @since 0.20.1
* @apiNote In 3.0.0 version, the input list {@code deletes} will no longer be modified. Also,
* {@link #put(List)} runs pre-flight validations on the input list on client. Currently
* {@link #delete(List)} doesn't run validations on the client, there is no need currently,
* but this may change in the future. An * {@link IllegalArgumentException} will be thrown
* in this case.
*/
default void delete(List deletes) throws IOException {
throw new NotImplementedException("Add an implementation!");
}
/**
* Atomically checks if a row/family/qualifier value matches the expected
* value. If it does, it adds the delete. If the passed value is null, the
* check is for the lack of column (ie: non-existance)
*
* @param row to check
* @param family column family to check
* @param qualifier column qualifier to check
* @param value the expected value
* @param delete data to delete if check succeeds
* @throws IOException e
* @return true if the new delete was executed, false otherwise
* @deprecated Since 2.0.0. Will be removed in 3.0.0. Use {@link #checkAndMutate(byte[], byte[])}
*/
@Deprecated
default boolean checkAndDelete(byte[] row, byte[] family, byte[] qualifier,
byte[] value, Delete delete) throws IOException {
return checkAndDelete(row, family, qualifier, CompareOperator.EQUAL, value, delete);
}
/**
* Atomically checks if a row/family/qualifier value matches the expected
* value. If it does, it adds the delete. If the passed value is null, the
* check is for the lack of column (ie: non-existence)
*
* The expected value argument of this call is on the left and the current
* value of the cell is on the right side of the comparison operator.
*
* Ie. eg. GREATER operator means expected value > existing <=> add the delete.
*
* @param row to check
* @param family column family to check
* @param qualifier column qualifier to check
* @param compareOp comparison operator to use
* @param value the expected value
* @param delete data to delete if check succeeds
* @throws IOException e
* @return true if the new delete was executed, false otherwise
* @deprecated Since 2.0.0. Will be removed in 3.0.0. Use {@link #checkAndMutate(byte[], byte[])}
*/
@Deprecated
default boolean checkAndDelete(byte[] row, byte[] family, byte[] qualifier,
CompareFilter.CompareOp compareOp, byte[] value, Delete delete) throws IOException {
RowMutations mutations = new RowMutations(delete.getRow(), 1);
mutations.add(delete);
return checkAndMutate(row, family, qualifier, compareOp, value, mutations);
}
/**
* Atomically checks if a row/family/qualifier value matches the expected
* value. If it does, it adds the delete. If the passed value is null, the
* check is for the lack of column (ie: non-existence)
*
* The expected value argument of this call is on the left and the current
* value of the cell is on the right side of the comparison operator.
*
* Ie. eg. GREATER operator means expected value > existing <=> add the delete.
*
* @param row to check
* @param family column family to check
* @param qualifier column qualifier to check
* @param op comparison operator to use
* @param value the expected value
* @param delete data to delete if check succeeds
* @throws IOException e
* @return true if the new delete was executed, false otherwise
* @deprecated Since 2.0.0. Will be removed in 3.0.0. Use {@link #checkAndMutate(byte[], byte[])}
*/
@Deprecated
default boolean checkAndDelete(byte[] row, byte[] family, byte[] qualifier,
CompareOperator op, byte[] value, Delete delete) throws IOException {
RowMutations mutations = new RowMutations(delete.getRow(), 1);
mutations.add(delete);
return checkAndMutate(row, family, qualifier, op, value, mutations);
}
/**
* Atomically checks if a row/family/qualifier value matches the expected value. If it does, it
* adds the Put/Delete/RowMutations.
*
* Use the returned {@link CheckAndMutateBuilder} to construct your request and then execute it.
* This is a fluent style API, the code is like:
*
*
*
* table.checkAndMutate(row, family).qualifier(qualifier).ifNotExists().thenPut(put);
*
*
*/
default CheckAndMutateBuilder checkAndMutate(byte[] row, byte[] family) {
throw new NotImplementedException("Add an implementation!");
}
/**
* A helper class for sending checkAndMutate request.
*/
interface CheckAndMutateBuilder {
/**
* @param qualifier column qualifier to check.
*/
CheckAndMutateBuilder qualifier(byte[] qualifier);
/**
* @param timeRange timeRange to check
*/
CheckAndMutateBuilder timeRange(TimeRange timeRange);
/**
* Check for lack of column.
*/
CheckAndMutateBuilder ifNotExists();
/**
* Check for equality.
* @param value the expected value
*/
default CheckAndMutateBuilder ifEquals(byte[] value) {
return ifMatches(CompareOperator.EQUAL, value);
}
/**
* @param compareOp comparison operator to use
* @param value the expected value
*/
CheckAndMutateBuilder ifMatches(CompareOperator compareOp, byte[] value);
/**
* @param put data to put if check succeeds
* @return {@code true} if the new put was executed, {@code false} otherwise.
*/
boolean thenPut(Put put) throws IOException;
/**
* @param delete data to delete if check succeeds
* @return {@code true} if the new delete was executed, {@code false} otherwise.
*/
boolean thenDelete(Delete delete) throws IOException;
/**
* @param mutation mutations to perform if check succeeds
* @return true if the new mutation was executed, false otherwise.
*/
boolean thenMutate(RowMutations mutation) throws IOException;
}
/**
* Performs multiple mutations atomically on a single row. Currently
* {@link Put} and {@link Delete} are supported.
*
* @param rm object that specifies the set of mutations to perform atomically
* @throws IOException
*/
default void mutateRow(final RowMutations rm) throws IOException {
throw new NotImplementedException("Add an implementation!");
}
/**
* Appends values to one or more columns within a single row.
*
* This operation guaranteed atomicity to readers. Appends are done
* under a single row lock, so write operations to a row are synchronized, and
* readers are guaranteed to see this operation fully completed.
*
* @param append object that specifies the columns and values to be appended
* @throws IOException e
* @return values of columns after the append operation (maybe null)
*/
default Result append(final Append append) throws IOException {
throw new NotImplementedException("Add an implementation!");
}
/**
* Increments one or more columns within a single row.
*
* This operation ensures atomicity to readers. Increments are done
* under a single row lock, so write operations to a row are synchronized, and
* readers are guaranteed to see this operation fully completed.
*
* @param increment object that specifies the columns and amounts to be used
* for the increment operations
* @throws IOException e
* @return values of columns after the increment
*/
default Result increment(final Increment increment) throws IOException {
throw new NotImplementedException("Add an implementation!");
}
/**
* See {@link #incrementColumnValue(byte[], byte[], byte[], long, Durability)}
*
* The {@link Durability} is defaulted to {@link Durability#SYNC_WAL}.
* @param row The row that contains the cell to increment.
* @param family The column family of the cell to increment.
* @param qualifier The column qualifier of the cell to increment.
* @param amount The amount to increment the cell with (or decrement, if the
* amount is negative).
* @return The new value, post increment.
* @throws IOException if a remote or network exception occurs.
*/
default long incrementColumnValue(byte[] row, byte[] family, byte[] qualifier, long amount)
throws IOException {
Increment increment = new Increment(row).addColumn(family, qualifier, amount);
Cell cell = increment(increment).getColumnLatestCell(family, qualifier);
return Bytes.toLong(cell.getValueArray(), cell.getValueOffset(), cell.getValueLength());
}
/**
* Atomically increments a column value. If the column value already exists
* and is not a big-endian long, this could throw an exception. If the column
* value does not yet exist it is initialized to amount and
* written to the specified column.
*
*
Setting durability to {@link Durability#SKIP_WAL} means that in a fail
* scenario you will lose any increments that have not been flushed.
* @param row The row that contains the cell to increment.
* @param family The column family of the cell to increment.
* @param qualifier The column qualifier of the cell to increment.
* @param amount The amount to increment the cell with (or decrement, if the
* amount is negative).
* @param durability The persistence guarantee for this increment.
* @return The new value, post increment.
* @throws IOException if a remote or network exception occurs.
*/
default long incrementColumnValue(byte[] row, byte[] family, byte[] qualifier,
long amount, Durability durability) throws IOException {
Increment increment = new Increment(row)
.addColumn(family, qualifier, amount)
.setDurability(durability);
Cell cell = increment(increment).getColumnLatestCell(family, qualifier);
return Bytes.toLong(cell.getValueArray(), cell.getValueOffset(), cell.getValueLength());
}
/**
* Releases any resources held or pending changes in internal buffers.
*
* @throws IOException if a remote or network exception occurs.
*/
@Override
default void close() throws IOException {
throw new NotImplementedException("Add an implementation!");
}
/**
* Creates and returns a {@link com.google.protobuf.RpcChannel} instance connected to the
* table region containing the specified row. The row given does not actually have
* to exist. Whichever region would contain the row based on start and end keys will
* be used. Note that the {@code row} parameter is also not passed to the
* coprocessor handler registered for this protocol, unless the {@code row}
* is separately passed as an argument in the service request. The parameter
* here is only used to locate the region used to handle the call.
*
*
* The obtained {@link com.google.protobuf.RpcChannel} instance can be used to access a published
* coprocessor {@link com.google.protobuf.Service} using standard protobuf service invocations:
*
*
*
*
* CoprocessorRpcChannel channel = myTable.coprocessorService(rowkey);
* MyService.BlockingInterface service = MyService.newBlockingStub(channel);
* MyCallRequest request = MyCallRequest.newBuilder()
* ...
* .build();
* MyCallResponse response = service.myCall(null, request);
*
*
* @param row The row key used to identify the remote region location
* @return A CoprocessorRpcChannel instance
*/
default CoprocessorRpcChannel coprocessorService(byte[] row) {
throw new NotImplementedException("Add an implementation!");
}
/**
* Creates an instance of the given {@link com.google.protobuf.Service} subclass for each table
* region spanning the range from the {@code startKey} row to {@code endKey} row (inclusive), and
* invokes the passed {@link org.apache.hadoop.hbase.client.coprocessor.Batch.Call#call} method
* with each {@link com.google.protobuf.Service} instance.
*
* @param service the protocol buffer {@code Service} implementation to call
* @param startKey start region selection with region containing this row. If {@code null}, the
* selection will start with the first table region.
* @param endKey select regions up to and including the region containing this row. If
* {@code null}, selection will continue through the last table region.
* @param callable this instance's
* {@link org.apache.hadoop.hbase.client.coprocessor.Batch.Call#call}
* method will be invoked once per table region, using the {@link com.google.protobuf.Service}
* instance connected to that region.
* @param the {@link com.google.protobuf.Service} subclass to connect to
* @param Return type for the {@code callable} parameter's {@link
* org.apache.hadoop.hbase.client.coprocessor.Batch.Call#call} method
* @return a map of result values keyed by region name
*/
default Map coprocessorService(final Class service,
byte[] startKey, byte[] endKey, final Batch.Call callable)
throws ServiceException, Throwable {
throw new NotImplementedException("Add an implementation!");
}
/**
* Creates an instance of the given {@link com.google.protobuf.Service} subclass for each table
* region spanning the range from the {@code startKey} row to {@code endKey} row (inclusive), and
* invokes the passed {@link org.apache.hadoop.hbase.client.coprocessor.Batch.Call#call} method
* with each {@link Service} instance.
*
* The given
* {@link org.apache.hadoop.hbase.client.coprocessor.Batch.Callback#update(byte[],byte[],Object)}
* method will be called with the return value from each region's
* {@link org.apache.hadoop.hbase.client.coprocessor.Batch.Call#call} invocation.
*
* @param service the protocol buffer {@code Service} implementation to call
* @param startKey start region selection with region containing this row. If {@code null}, the
* selection will start with the first table region.
* @param endKey select regions up to and including the region containing this row. If
* {@code null}, selection will continue through the last table region.
* @param callable this instance's
* {@link org.apache.hadoop.hbase.client.coprocessor.Batch.Call#call}
* method will be invoked once per table region, using the {@link Service} instance connected to
* that region.
* @param the {@link Service} subclass to connect to
* @param Return type for the {@code callable} parameter's {@link
* org.apache.hadoop.hbase.client.coprocessor.Batch.Call#call} method
*/
default void coprocessorService(final Class service,
byte[] startKey, byte[] endKey, final Batch.Call callable,
final Batch.Callback callback) throws ServiceException, Throwable {
throw new NotImplementedException("Add an implementation!");
}
/**
* Creates an instance of the given {@link com.google.protobuf.Service} subclass for each table
* region spanning the range from the {@code startKey} row to {@code endKey} row (inclusive), all
* the invocations to the same region server will be batched into one call. The coprocessor
* service is invoked according to the service instance, method name and parameters.
*
* @param methodDescriptor
* the descriptor for the protobuf service method to call.
* @param request
* the method call parameters
* @param startKey
* start region selection with region containing this row. If {@code null}, the
* selection will start with the first table region.
* @param endKey
* select regions up to and including the region containing this row. If {@code null},
* selection will continue through the last table region.
* @param responsePrototype
* the proto type of the response of the method in Service.
* @param
* the response type for the coprocessor Service method
* @return a map of result values keyed by region name
*/
default Map batchCoprocessorService(
Descriptors.MethodDescriptor methodDescriptor, Message request,
byte[] startKey, byte[] endKey, R responsePrototype) throws ServiceException, Throwable {
throw new NotImplementedException("Add an implementation!");
}
/**
* Creates an instance of the given {@link com.google.protobuf.Service} subclass for each table
* region spanning the range from the {@code startKey} row to {@code endKey} row (inclusive), all
* the invocations to the same region server will be batched into one call. The coprocessor
* service is invoked according to the service instance, method name and parameters.
*
*
* The given
* {@link org.apache.hadoop.hbase.client.coprocessor.Batch.Callback#update(byte[],byte[],Object)}
* method will be called with the return value from each region's invocation.
*
*
* @param methodDescriptor the descriptor for the protobuf service method to call.
* @param request the method call parameters
* @param startKey start region selection with region containing this row.
* If {@code null}, the selection will start with the first table region.
* @param endKey select regions up to and including the region containing this row.
* If {@code null}, selection will continue through the last table region.
* @param responsePrototype the proto type of the response of the method in Service.
* @param callback callback to invoke with the response for each region
* @param
* the response type for the coprocessor Service method
*/
default void batchCoprocessorService(
Descriptors.MethodDescriptor methodDescriptor, Message request, byte[] startKey,
byte[] endKey, R responsePrototype, Batch.Callback callback)
throws ServiceException, Throwable {
throw new NotImplementedException("Add an implementation!");
}
/**
* Atomically checks if a row/family/qualifier value matches the expected value.
* If it does, it performs the row mutations. If the passed value is null, the check
* is for the lack of column (ie: non-existence)
*
* The expected value argument of this call is on the left and the current
* value of the cell is on the right side of the comparison operator.
*
* Ie. eg. GREATER operator means expected value > existing <=> perform row mutations.
*
* @param row to check
* @param family column family to check
* @param qualifier column qualifier to check
* @param compareOp the comparison operator
* @param value the expected value
* @param mutation mutations to perform if check succeeds
* @throws IOException e
* @return true if the new put was executed, false otherwise
* @deprecated Since 2.0.0. Will be removed in 3.0.0. Use {@link #checkAndMutate(byte[], byte[])}
*/
@Deprecated
default boolean checkAndMutate(byte[] row, byte[] family, byte[] qualifier,
CompareFilter.CompareOp compareOp, byte[] value, RowMutations mutation) throws IOException {
throw new NotImplementedException("Add an implementation!");
}
/**
* Atomically checks if a row/family/qualifier value matches the expected value.
* If it does, it performs the row mutations. If the passed value is null, the check
* is for the lack of column (ie: non-existence)
*
* The expected value argument of this call is on the left and the current
* value of the cell is on the right side of the comparison operator.
*
* Ie. eg. GREATER operator means expected value > existing <=> perform row mutations.
*
* @param row to check
* @param family column family to check
* @param qualifier column qualifier to check
* @param op the comparison operator
* @param value the expected value
* @param mutation mutations to perform if check succeeds
* @throws IOException e
* @return true if the new put was executed, false otherwise
* @deprecated Since 2.0.0. Will be removed in 3.0.0. Use {@link #checkAndMutate(byte[], byte[])}
*/
@Deprecated
default boolean checkAndMutate(byte[] row, byte[] family, byte[] qualifier, CompareOperator op,
byte[] value, RowMutations mutation) throws IOException {
throw new NotImplementedException("Add an implementation!");
}
/**
* Get timeout of each rpc request in this Table instance. It will be overridden by a more
* specific rpc timeout config such as readRpcTimeout or writeRpcTimeout.
* @see #getReadRpcTimeout(TimeUnit)
* @see #getWriteRpcTimeout(TimeUnit)
* @param unit the unit of time the timeout to be represented in
* @return rpc timeout in the specified time unit
*/
default long getRpcTimeout(TimeUnit unit) {
throw new NotImplementedException("Add an implementation!");
}
/**
* Get timeout (millisecond) of each rpc request in this Table instance.
*
* @return Currently configured read timeout
* @deprecated use {@link #getReadRpcTimeout(TimeUnit)} or
* {@link #getWriteRpcTimeout(TimeUnit)} instead
*/
@Deprecated
default int getRpcTimeout() {
return (int)getRpcTimeout(TimeUnit.MILLISECONDS);
}
/**
* Set timeout (millisecond) of each rpc request in operations of this Table instance, will
* override the value of hbase.rpc.timeout in configuration.
* If a rpc request waiting too long, it will stop waiting and send a new request to retry until
* retries exhausted or operation timeout reached.
*
* NOTE: This will set both the read and write timeout settings to the provided value.
*
* @param rpcTimeout the timeout of each rpc request in millisecond.
*
* @deprecated Use setReadRpcTimeout or setWriteRpcTimeout instead
*/
@Deprecated
default void setRpcTimeout(int rpcTimeout) {
setReadRpcTimeout(rpcTimeout);
setWriteRpcTimeout(rpcTimeout);
}
/**
* Get timeout of each rpc read request in this Table instance.
* @param unit the unit of time the timeout to be represented in
* @return read rpc timeout in the specified time unit
*/
default long getReadRpcTimeout(TimeUnit unit) {
throw new NotImplementedException("Add an implementation!");
}
/**
* Get timeout (millisecond) of each rpc read request in this Table instance.
* @deprecated since 2.0 and will be removed in 3.0 version
* use {@link #getReadRpcTimeout(TimeUnit)} instead
*/
@Deprecated
default int getReadRpcTimeout() {
return (int)getReadRpcTimeout(TimeUnit.MILLISECONDS);
}
/**
* Set timeout (millisecond) of each rpc read request in operations of this Table instance, will
* override the value of hbase.rpc.read.timeout in configuration.
* If a rpc read request waiting too long, it will stop waiting and send a new request to retry
* until retries exhausted or operation timeout reached.
*
* @param readRpcTimeout the timeout for read rpc request in milliseconds
* @deprecated since 2.0.0, use {@link TableBuilder#setReadRpcTimeout} instead
*/
@Deprecated
default void setReadRpcTimeout(int readRpcTimeout) {
throw new NotImplementedException("Add an implementation!");
}
/**
* Get timeout of each rpc write request in this Table instance.
* @param unit the unit of time the timeout to be represented in
* @return write rpc timeout in the specified time unit
*/
default long getWriteRpcTimeout(TimeUnit unit) {
throw new NotImplementedException("Add an implementation!");
}
/**
* Get timeout (millisecond) of each rpc write request in this Table instance.
* @deprecated since 2.0 and will be removed in 3.0 version
* use {@link #getWriteRpcTimeout(TimeUnit)} instead
*/
@Deprecated
default int getWriteRpcTimeout() {
return (int)getWriteRpcTimeout(TimeUnit.MILLISECONDS);
}
/**
* Set timeout (millisecond) of each rpc write request in operations of this Table instance, will
* override the value of hbase.rpc.write.timeout in configuration.
* If a rpc write request waiting too long, it will stop waiting and send a new request to retry
* until retries exhausted or operation timeout reached.
*
* @param writeRpcTimeout the timeout for write rpc request in milliseconds
* @deprecated since 2.0.0, use {@link TableBuilder#setWriteRpcTimeout} instead
*/
@Deprecated
default void setWriteRpcTimeout(int writeRpcTimeout) {
throw new NotImplementedException("Add an implementation!");
}
/**
* Get timeout of each operation in Table instance.
* @param unit the unit of time the timeout to be represented in
* @return operation rpc timeout in the specified time unit
*/
default long getOperationTimeout(TimeUnit unit) {
throw new NotImplementedException("Add an implementation!");
}
/**
* Get timeout (millisecond) of each operation for in Table instance.
* @deprecated since 2.0 and will be removed in 3.0 version
* use {@link #getOperationTimeout(TimeUnit)} instead
*/
@Deprecated
default int getOperationTimeout() {
return (int)getOperationTimeout(TimeUnit.MILLISECONDS);
}
/**
* Set timeout (millisecond) of each operation in this Table instance, will override the value
* of hbase.client.operation.timeout in configuration.
* Operation timeout is a top-level restriction that makes sure a blocking method will not be
* blocked more than this. In each operation, if rpc request fails because of timeout or
* other reason, it will retry until success or throw a RetriesExhaustedException. But if the
* total time being blocking reach the operation timeout before retries exhausted, it will break
* early and throw SocketTimeoutException.
* @param operationTimeout the total timeout of each operation in millisecond.
* @deprecated since 2.0.0, use {@link TableBuilder#setOperationTimeout} instead
*/
@Deprecated
default void setOperationTimeout(int operationTimeout) {
throw new NotImplementedException("Add an implementation!");
}
}