fiftyone.pipeline.engines.configuration.DataFileConfiguration Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of pipeline.engines Show documentation
Show all versions of pipeline.engines Show documentation
Shared base functionality for implementing engines for the 51Degrees Pipeline API
/* *********************************************************************
* This Original Work is copyright of 51 Degrees Mobile Experts Limited.
* Copyright 2023 51 Degrees Mobile Experts Limited, Davidson House,
* Forbury Square, Reading, Berkshire, United Kingdom RG1 3EU.
*
* This Original Work is licensed under the European Union Public Licence
* (EUPL) v.1.2 and is subject to its terms as set out below.
*
* If a copy of the EUPL was not distributed with this file, You can obtain
* one at https://opensource.org/licenses/EUPL-1.2.
*
* The 'Compatible Licences' set out in the Appendix to the EUPL (as may be
* amended by the European Commission) shall be deemed incompatible for
* the purposes of the Work and the provisions of the compatibility
* clause in Article 5 of the EUPL shall not apply.
*
* If using the Work as, or as part of, a network application, by
* including the attribution notice(s) required under Article 5 of the EUPL
* in the end user terms of the application under an appropriate heading,
* such notice(s) shall fulfill the requirements of that article.
* ********************************************************************* */
package fiftyone.pipeline.engines.configuration;
import fiftyone.pipeline.engines.data.DataUpdateUrlFormatter;
import java.nio.file.WatchKey;
import java.util.List;
/**
* Interface representing the configuration parameters controlling the automatic
* update checks for a specific data file. *
* @see Specification
*/
public interface DataFileConfiguration {
/**
* Get the identifier of the data file that this configuration
* information applies to.
* If the engine only supports a single data file then this
* value will be ignored.
* @return data file identifier
*/
String getIdentifier();
/**
* Set the identifier of the data file that this configuration
* information applies to.
* If the engine only supports a single data file then this
* value will be ignored.
* @param identifier data file identifier
*/
void setIdentifier(String identifier);
/**
* Get the complete file path to the location of the data file.
* This value will be null if the file has been supplied from
* a byte[] in memory.
* @return data file path or null
*/
String getDataFilePath();
/**
* Set the complete file path to the location of the data file.
* @param dataFilePath data file path
*/
void setDataFilePath(String dataFilePath);
/**
* Get whether a temporary copy of the data file should be used rather than
* using the on at the location provided directly.
* @return true if the engine should create a temporary data file
*/
boolean getCreateTempDataCopy();
/**
* Set to true if the engine should create a temporary copy of
* the data file rather than using the one at the location
* provided directly.
* This setting must be set to true if automatic updates are required.
* @param createTempCopy true if the engine should create a temporary data
* file
*/
void setCreateTempCopy(boolean createTempCopy);
/**
* If set, this byte array contains an in-memory representation
* of the data used by the engine.
* This will be null unless this instance has specifically been
* created from a byte array.
* @return data file as a byte array or null
*/
byte[] getData();
/**
* Set the data file as a byte array. If set, this byte array contains an
* in-memory representation of the data used by the engine.
* @param data data file as a byte array
*/
void setData(byte[] data);
/**
* Get the URL to check when looking for updates to the data file.
* @return URL to get updates from
*/
String getDataUpdateUrl();
/**
* Set the URL to check when looking for updates to the data file.
* @param url URL to get updates from
*/
void setDataUpdateUrl(String url);
/**
* Flag that indicates if updates to the data file will be checked
* for and applied to the engine automatically or not.
* @return true if data file updates should be scheduled
*/
boolean getAutomaticUpdatesEnabled();
/**
* Set the flag that indicates if updates to the data file will be checked
* for and applied to the engine automatically or not.
* @param enabled true if data file updates should be scheduled
*/
void setAutomaticUpdatesEnabled(boolean enabled);
/**
* Get a list of license keys to use when checking for updates using the
* {@link #getDataUpdateUrl()}. Note that the exact formatting of the query
* string is controlled by the configured {@link #getUrlFormatter()}.
* @return list of license keys
*/
List getDataUpdateLicenseKeys();
/**
* Set the list of license keys to use when checking for updates using the
* {@link #getDataUpdateUrl()}. Note that the exact formatting of the query
* string is controlled by the configured {@link #getUrlFormatter()}.
* @param licenseKeys list of license keys
*/
void setDataUpdateLicenseKeys(List licenseKeys);
/**
* Get the {@link WatchKey} used to watch the file system for file changes.
* This will be null if {@link #getFileSystemWatcherEnabled()} is false.
* @return watch key or null
*/
WatchKey getWatchKey();
/**
* Set the {@link WatchKey} used to watch the file system for file changes.
* @param watchKey watch key for the data file
*/
void setWatchKey(WatchKey watchKey);
/**
* If true, a {@link WatchKey} will be created to watch the file at
* {@link #getDataFilePath()}. If the file is modified then the engine will
* automatically be notified so that it can refresh it's internal data
* structures.
* @return true if file watcher is enabled
*/
boolean getFileSystemWatcherEnabled();
/**
* If true, a {@link WatchKey} will be created to watch the file at
* {@link #getDataFilePath()}. If the file is modified then the engine will
* automatically be notified so that it can refresh it's internal data
* structures.
* @param enabled true if file watcher should be
*/
void setFileSystemWatcherEnabled(boolean enabled);
/**
* Get the interval between checks for updates for this data file using the
* specified {@link #getDataUpdateUrl()}.
* @return polling interval in seconds
*/
int getPollingIntervalSeconds();
/**
* Set the interval between checks for updates for this data file using the
* specified {@link #getDataUpdateUrl()}.
* @param seconds polling interval in seconds
*/
void setPollingIntervalSeconds(int seconds);
/**
* Get the maximum time in seconds that the polling interval may be
* randomized by. I.e. each polling interval will be the configured
* interval + or - a random amount between zero and this value.
* This settings is intended to be used to allow multiple instances of a
* system stagger their update requests to reduce chance of conflict errors
* or slow update downloads.
* @return maximum randomisation in seconds
*/
int getMaxRandomisationSeconds();
/**
* Set the maximum time in seconds that the polling interval may be
* randomized by. I.e. each polling interval will be the configured
* interval + or - a random amount between zero and this value.
* This settings is intended to be used to allow multiple instances of a
* system stagger their update requests to reduce chance of conflict errors
* or slow update downloads.
* @param seconds maximum randomisation in seconds
*/
void setMaxRandomisationSeconds(int seconds);
/**
* Get the formatter to use when getting the data update URL with query
* string parameters set.
* @return URL formatter
*/
DataUpdateUrlFormatter getUrlFormatter();
/**
* Set the formatter to use when getting the data update URL with query
* string parameters set.
* @param formatter URL formatter
*/
void setUrlFormatter(DataUpdateUrlFormatter formatter);
/**
* Must return true if the data downloaded from the
* {@link #getDataUpdateUrl()} is compressed and false otherwise.
* @return true if downloaded data should be decompressed
*/
boolean getDecompressContent();
/**
* Set whether the data downloaded from the {@link #getDataUpdateUrl()} is
* compressed.
* @param decompress true if downloaded data should be decompressed
*/
void setDecompressContent(boolean decompress);
/**
* Must return true if the response from the {@link #getDataUpdateUrl()}
* is expected to include a 'Content-Md5' HTTP header that
* contains an MD5 hash that can be used to check the
* integrity of the downloaded content.
* @return true if data MD5 should be verified
*/
boolean getVerifyMd5();
/**
* Set whether the response from the {@link #getDataUpdateUrl()}
* is expected to include a 'Content-Md5' HTTP header that
* contains an MD5 hash that can be used to check the
* integrity of the downloaded content.
* @param verify true if data MD5 should be verified
*/
void setVerifyMd5(boolean verify);
/**
* Must return true if the request to the {@link #getDataUpdateUrl()}
* supports the 'If-Modified-Since' header and false if it does not.
* @return true if the 'If-Modified-Since' header should be checked
*/
boolean getVerifyModifiedSince();
/**
* Set whether the request to the {@link #getDataUpdateUrl()}
* supports the 'If-Modified-Since' header and false if it does not.
* @param verify true if the 'If-Modified-Since' header should be checked
*/
void setVerifyModifiedSince(boolean verify);
/**
* If true then when this file is registered with the data
* update service, it will immediately try to download the latest
* copy of the file.
* This action will block execution until the download is complete
* and the engine has loaded the new file.
* @return true if the data file should be updated during startup
*/
boolean getUpdateOnStartup();
/**
* Set if when this file is registered with the data update service, it will
* immediately try to download the latest copy of the file.
* This action will block execution until the download is complete
* and the engine has loaded the new file.
* @param enabled true if the data file should be updated during startup
*/
void setUpdateOnStartup(boolean enabled);
}
© 2015 - 2024 Weber Informatics LLC | Privacy Policy