javax.mail.Part Maven / Gradle / Ivy
Show all versions of aem-sdk-api Show documentation
/*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
*
* Copyright (c) 1997-2017 Oracle and/or its affiliates. All rights reserved.
*
* The contents of this file are subject to the terms of either the GNU
* General Public License Version 2 only ("GPL") or the Common Development
* and Distribution License("CDDL") (collectively, the "License"). You
* may not use this file except in compliance with the License. You can
* obtain a copy of the License at
* https://oss.oracle.com/licenses/CDDL+GPL-1.1
* or LICENSE.txt. See the License for the specific
* language governing permissions and limitations under the License.
*
* When distributing the software, include this License Header Notice in each
* file and include the License file at LICENSE.txt.
*
* GPL Classpath Exception:
* Oracle designates this particular file as subject to the "Classpath"
* exception as provided by Oracle in the GPL Version 2 section of the License
* file that accompanied this code.
*
* Modifications:
* If applicable, add the following below the License Header, with the fields
* enclosed by brackets [] replaced by your own identifying information:
* "Portions Copyright [year] [name of copyright owner]"
*
* Contributor(s):
* If you wish your version of this file to be governed by only the CDDL or
* only the GPL Version 2, indicate your decision by adding "[Contributor]
* elects to include this software in this distribution under the [CDDL or GPL
* Version 2] license." If you don't indicate a single choice of license, a
* recipient has the option to distribute your version of this file under
* either the CDDL, the GPL Version 2 or to extend the choice of license to
* its licensees as provided above. However, if you add GPL Version 2 code
* and therefore, elected the GPL Version 2 license, then the option applies
* only if the new code is made subject to such option by the copyright
* holder.
*/
package javax.mail;
import java.io.*;
import java.util.Enumeration;
import javax.activation.DataHandler;
/**
* The Part interface is the common base interface for
* Messages and BodyParts.
*
* Part consists of a set of attributes and a "Content".
*
* Attributes:
*
* The JavaMail API defines a set of standard Part attributes that are
* considered to be common to most existing Mail systems. These
* attributes have their own settor and gettor methods. Mail systems
* may support other Part attributes as well, these are represented as
* name-value pairs where both the name and value are Strings.
*
* Content:
*
* The data type of the "content" is returned by
* the getContentType() method. The MIME typing system
* is used to name data types.
*
* The "content" of a Part is available in various formats:
*
* - As a DataHandler - using the
getDataHandler() method.
* The "content" of a Part is also available through a
* javax.activation.DataHandler object. The DataHandler
* object allows clients to discover the operations available on the
* content, and to instantiate the appropriate component to perform
* those operations.
*
* - As an input stream - using the
getInputStream() method.
* Any mail-specific encodings are decoded before this stream is returned.
*
* - As a Java object - using the
getContent() method.
* This method returns the "content" as a Java object.
* The returned object is of course dependent on the content
* itself. In particular, a "multipart" Part's content is always a
* Multipart or subclass thereof. That is, getContent() on a
* "multipart" type Part will always return a Multipart (or subclass) object.
*
*
* Part provides the writeTo() method that streams
* out its bytestream in mail-safe form suitable for transmission.
* This bytestream is typically an aggregation of the Part attributes
* and its content's bytestream.
*
* Message and BodyPart implement the Part interface. Note that in
* MIME parlance, Part models an Entity (RFC 2045, Section 2.4).
*
* @author John Mani
*/
public interface Part {
/**
* Return the size of the content of this part in bytes.
* Return -1 if the size cannot be determined.
*
* Note that the size may not be an exact measure of the content
* size and may or may not account for any transfer encoding
* of the content. The size is appropriate for display in a
* user interface to give the user a rough idea of the size
* of this part.
*
* @return size of content in bytes
* @exception MessagingException for failures
*/
public int getSize() throws MessagingException;
/**
* Return the number of lines in the content of this part.
* Return -1 if the number cannot be determined.
*
* Note that this number may not be an exact measure of the
* content length and may or may not account for any transfer
* encoding of the content.
*
* @return number of lines in the content.
* @exception MessagingException for failures
*/
public int getLineCount() throws MessagingException;
/**
* Returns the Content-Type of the content of this part.
* Returns null if the Content-Type could not be determined.
*
* The MIME typing system is used to name Content-types.
*
* @return The ContentType of this part
* @exception MessagingException for failures
* @see javax.activation.DataHandler
*/
public String getContentType() throws MessagingException;
/**
* Is this Part of the specified MIME type? This method
* compares only the primaryType and
* subType.
* The parameters of the content types are ignored.
*
* For example, this method will return true when
* comparing a Part of content type "text/plain"
* with "text/plain; charset=foobar".
*
* If the subType of mimeType is the
* special character '*', then the subtype is ignored during the
* comparison.
*
* @param mimeType the MIME type to test
* @return true if this part is of the specified type
* @exception MessagingException for failures
*/
public boolean isMimeType(String mimeType) throws MessagingException;
/**
* This part should be presented as an attachment.
* @see #getDisposition
* @see #setDisposition
*/
public static final String ATTACHMENT = "attachment";
/**
* This part should be presented inline.
* @see #getDisposition
* @see #setDisposition
*/
public static final String INLINE = "inline";
/**
* Return the disposition of this part. The disposition
* describes how the part should be presented to the user.
* (See RFC 2183.) The return value should be considered
* without regard to case. For example:
*
* String disp = part.getDisposition();
* if (disp == null || disp.equalsIgnoreCase(Part.ATTACHMENT))
* // treat as attachment if not first part
*
*
* @return disposition of this part, or null if unknown
* @exception MessagingException for failures
* @see #ATTACHMENT
* @see #INLINE
* @see #getFileName
*/
public String getDisposition() throws MessagingException;
/**
* Set the disposition of this part.
*
* @param disposition disposition of this part
* @exception IllegalWriteException if the underlying implementation
* does not support modification of this header
* @exception IllegalStateException if this Part is obtained
* from a READ_ONLY folder
* @exception MessagingException for other failures
* @see #ATTACHMENT
* @see #INLINE
* @see #setFileName
*/
public void setDisposition(String disposition) throws MessagingException;
/**
* Return a description String for this part. This typically
* associates some descriptive information with this part.
* Returns null if none is available.
*
* @return description of this part
* @exception MessagingException for failures
*/
public String getDescription() throws MessagingException;
/**
* Set a description String for this part. This typically
* associates some descriptive information with this part.
*
* @param description description of this part
* @exception IllegalWriteException if the underlying implementation
* does not support modification of this header
* @exception IllegalStateException if this Part is obtained
* from a READ_ONLY folder
* @exception MessagingException for other failures
*/
public void setDescription(String description) throws MessagingException;
/**
* Get the filename associated with this part, if possible.
* Useful if this part represents an "attachment" that was
* loaded from a file. The filename will usually be a simple
* name, not including directory components.
*
* @return Filename to associate with this part
* @exception MessagingException for failures
*/
public String getFileName() throws MessagingException;
/**
* Set the filename associated with this part, if possible.
* Useful if this part represents an "attachment" that was
* loaded from a file. The filename will usually be a simple
* name, not including directory components.
*
* @param filename Filename to associate with this part
* @exception IllegalWriteException if the underlying implementation
* does not support modification of this header
* @exception IllegalStateException if this Part is obtained
* from a READ_ONLY folder
* @exception MessagingException for other failures
*/
public void setFileName(String filename) throws MessagingException;
/**
* Return an input stream for this part's "content". Any
* mail-specific transfer encodings will be decoded before the
* input stream is provided.
*
* This is typically a convenience method that just invokes
* the DataHandler's getInputStream() method.
*
* @return an InputStream
* @exception IOException this is typically thrown by the
* DataHandler. Refer to the documentation for
* javax.activation.DataHandler for more details.
* @exception MessagingException for other failures
* @see #getDataHandler
* @see javax.activation.DataHandler#getInputStream
*/
public InputStream getInputStream()
throws IOException, MessagingException;
/**
* Return a DataHandler for the content within this part. The
* DataHandler allows clients to operate on as well as retrieve
* the content.
*
* @return DataHandler for the content
* @exception MessagingException for failures
*/
public DataHandler getDataHandler() throws MessagingException;
/**
* Return the content as a Java object. The type of the returned
* object is of course dependent on the content itself. For example,
* the object returned for "text/plain" content is usually a String
* object. The object returned for a "multipart" content is always a
* Multipart subclass. For content-types that are unknown to the
* DataHandler system, an input stream is returned as the content
*
* This is a convenience method that just invokes the DataHandler's
* getContent() method
*
* @return Object
* @exception IOException this is typically thrown by the
* DataHandler. Refer to the documentation for
* javax.activation.DataHandler for more details.
* @exception MessagingException for other failures
*
* @see javax.activation.DataHandler#getContent
*/
public Object getContent() throws IOException, MessagingException;
/**
* This method provides the mechanism to set this part's content.
* The DataHandler wraps around the actual content.
*
* @param dh The DataHandler for the content.
* @exception IllegalWriteException if the underlying implementation
* does not support modification of existing values
* @exception IllegalStateException if this Part is obtained
* from a READ_ONLY folder
* @exception MessagingException for other failures
*/
public void setDataHandler(DataHandler dh) throws MessagingException;
/**
* A convenience method for setting this part's content. The part
* internally wraps the content in a DataHandler.
*
* Note that a DataContentHandler class for the specified type should
* be available to the JavaMail implementation for this to work right.
* i.e., to do setContent(foobar, "application/x-foobar"),
* a DataContentHandler for "application/x-foobar" should be installed.
* Refer to the Java Activation Framework for more information.
*
* @param obj A java object.
* @param type MIME type of this object.
* @exception IllegalWriteException if the underlying implementation
* does not support modification of existing values
* @exception IllegalStateException if this Part is obtained
* from a READ_ONLY folder
* @exception MessagingException for other failures
*/
public void setContent(Object obj, String type)
throws MessagingException;
/**
* A convenience method that sets the given String as this
* part's content with a MIME type of "text/plain".
*
* @param text The text that is the Message's content.
* @exception IllegalWriteException if the underlying
* implementation does not support modification of
* existing values
* @exception IllegalStateException if this Part is obtained
* from a READ_ONLY folder
* @exception MessagingException for other failures
*/
public void setText(String text) throws MessagingException;
/**
* This method sets the given Multipart object as this message's
* content.
*
* @param mp The multipart object that is the Message's content
* @exception IllegalWriteException if the underlying
* implementation does not support modification of
* existing values
* @exception IllegalStateException if this Part is obtained
* from a READ_ONLY folder
* @exception MessagingException for other failures
*/
public void setContent(Multipart mp) throws MessagingException;
/**
* Output a bytestream for this Part. This bytestream is
* typically an aggregration of the Part attributes and
* an appropriately encoded bytestream from its 'content'.
*
* Classes that implement the Part interface decide on
* the appropriate encoding algorithm to be used.
*
* The bytestream is typically used for sending.
*
* @param os the stream to write to
* @exception IOException if an error occurs writing to the
* stream or if an error is generated
* by the javax.activation layer.
* @exception MessagingException if an error occurs fetching the
* data to be written
*
* @see javax.activation.DataHandler#writeTo
*/
public void writeTo(OutputStream os) throws IOException, MessagingException;
/**
* Get all the headers for this header name. Returns null
* if no headers for this header name are available.
*
* @param header_name the name of this header
* @return the value fields for all headers with
* this name
* @exception MessagingException for failures
*/
public String[] getHeader(String header_name)
throws MessagingException;
/**
* Set the value for this header_name. Replaces all existing
* header values with this new value.
*
* @param header_name the name of this header
* @param header_value the value for this header
* @exception IllegalWriteException if the underlying
* implementation does not support modification
* of existing values
* @exception IllegalStateException if this Part is
* obtained from a READ_ONLY folder
* @exception MessagingException for other failures
*/
public void setHeader(String header_name, String header_value)
throws MessagingException;
/**
* Add this value to the existing values for this header_name.
*
* @param header_name the name of this header
* @param header_value the value for this header
* @exception IllegalWriteException if the underlying
* implementation does not support modification
* of existing values
* @exception IllegalStateException if this Part is
* obtained from a READ_ONLY folder
* @exception MessagingException for other failures
*/
public void addHeader(String header_name, String header_value)
throws MessagingException;
/**
* Remove all headers with this name.
*
* @param header_name the name of this header
* @exception IllegalWriteException if the underlying
* implementation does not support modification
* of existing values
* @exception IllegalStateException if this Part is
* obtained from a READ_ONLY folder
* @exception MessagingException for other failures
*/
public void removeHeader(String header_name)
throws MessagingException;
/**
* Return all the headers from this part as an Enumeration of
* Header objects.
*
* @return enumeration of Header objects
* @exception MessagingException for failures
*/
public Enumeration getAllHeaders() throws MessagingException;
/**
* Return matching headers from this part as an Enumeration of
* Header objects.
*
* @param header_names the headers to match
* @return enumeration of Header objects
* @exception MessagingException for failures
*/
public Enumeration getMatchingHeaders(String[] header_names)
throws MessagingException;
/**
* Return non-matching headers from this envelope as an Enumeration
* of Header objects.
*
* @param header_names the headers to not match
* @return enumeration of Header objects
* @exception MessagingException for failures
*/
public Enumeration getNonMatchingHeaders(String[] header_names)
throws MessagingException;
}