io.termd.core.term.terminfo.src Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of termd-core Show documentation
Show all versions of termd-core Show documentation
An open source terminal daemon library providing terminal handling in Java,
back ported to Alibaba by core engine team to support running on JDK 6+.
######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
#
# This version of terminfo.src is distributed with ncurses and is maintained
# by Thomas E. Dickey (TD).
#
# Report bugs and new terminal descriptions to
# [email protected]
#
# $Revision: 1.481 $
# $Date: 2013/11/02 20:56:05 $
#
# The original header is preserved below for reference. It is noted that there
# is a "newer" version which differs in some cosmetic details (but actually
# stopped updates several years ago); we have decided to not change the header
# unless there is also a change in content.
#
# To further muddy the waters, it is noted that changes to this file as part of
# maintenance of ncurses (since 1996) are generally conceded to be copyright
# under the ncurses MIT-style license. That was the effect of the agreement
# which the principal authors of ncurses made in 1998. However, since much of
# the file itself is of unknown authorship (and the disclaimer below makes it
# obvious that Raymond cannot or will not convey rights over those parts),
# there is no explicit copyright notice on the file itself.
#
# It would also be a nuisance to split the file into unknown/known authorship
# and move pieces as they are maintained, since many of the maintenance changes
# have been small corrections to Raymond's translations to/from termcap format,
# correcting the data but not the accompanying annotations.
#
# In any case, note that almost half of this file is not data but annotations
# which reflect creative effort. Furthermore, the structure of entries to
# reuse common chunks also is creative (and subject to copyright). Finally,
# some portions of the data are derivative work under a compatible MIT-style
# license from xterm.
#
#------------------------------------------------------------------------------
# Version 10.2.1
# terminfo syntax
#
# Eric S. Raymond (current maintainer)
# John Kunze, Berkeley
# Craig Leres, Berkeley
#
# Please e-mail changes to [email protected]; the old [email protected]
# address is no longer valid. The latest version can always be found at
# .
#
# PURPOSE OF THIS FILE:
#
# This file describes the capabilities of various character-cell terminals,
# as needed by software such as screen-oriented editors.
#
# Other terminfo and termcap files exist, supported by various OS vendors
# or as relics of various older versions of UNIX. This one is the longest
# and most comprehensive one in existence. It subsumes not only the entirety
# of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
# termcap file, but also large numbers of vendor-maintained termcap and
# terminfo entries more complete and carefully tested than those in historical
# termcap/terminfo versions.
#
# Pointers to related resources (including the ncurses distribution) may
# be found at .
#
# INTERNATIONALIZATION:
#
# This file uses only the US-ASCII character set (no ISO8859 characters).
#
# This file assumes a US-ASCII character set. If you need to fix this, start
# by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
# for your character set. \E(A and \E)A enables the British character set
# with the pound sign at position 2/3.
#
# In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
# C1 characters are considered the first-byte set of the Japanese encodings,
# so \E)0 should be avoided in and initialization strings.
#
# FILE FORMAT:
#
# The version you are looking at may be in any of three formats: master
# (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
# which by the format given in the header above.
#
# The master format is accepted and generated by the terminfo tools in the
# ncurses suite; it differs from stock (System V-compatible) terminfo only
# in that it admits a group of capabilities (prefixed `OT') equivalent to
# various obsolete termcap capabilities. You can, thus, convert from master
# to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
# you have ncurses `tic -I' is nicer (among other things, it automatically
# outputs entries in a canonical form).
#
# The termcap version is generated automatically from the master version
# using tic -C. This filtering leaves in the OT capabilities under their
# original termcap names. All translated entries fit within the 1023-byte
# string-table limit of archaic termcap libraries except where explicitly
# noted below. Note that the termcap translation assumes that your termcap
# library can handle multiple tc capabilities in an entry. 4.4BSD has this
# capability. Older versions of GNU termcap, through 1.3, do not.
#
# For details on these formats, see terminfo(5) in the ncurses distribution,
# and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
# curses has been declared obsolete by the caretakers of the 4.4BSD sources
# as of June 1995; they are encouraging everyone to migrate to ncurses.
#
# Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
# no entry in this file has embedded comments. This is so source translation
# to termcap only has to carry over leading comments. Also, no name field
# contains embedded whitespace (such whitespace confuses rdist).
#
# Further note: older versions of this file were often installed with an editor
# script (reorder) that moved the most common terminal types to the front of
# the file. This should no longer be necessary, as the file is now ordered
# roughly by type frequency with ANSI/VT100 and other common types up front.
#
# Some information has been merged in from terminfo files distributed by
# USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
# comes from vendors who maintain official terminfos for their hardware
# (notably DEC and Wyse).
#
# A detailed change history is included at the end of this file.
#
# FILE ORGANIZATION:
#
# Comments in this file begin with # - they cannot appear in the middle
# of a terminfo/termcap entry (this feature had to be sacrificed in order
# to allow standard terminfo and termcap syntax to be generated cleanly from
# the master format). Individual capabilities are commented out by
# placing a period between the colon and the capability name.
#
# The file is divided up into major sections (headed by lines beginning with
# the string "########") and minor sections (beginning with "####"); do
#
# grep "^####" | more
#
# to see a listing of section headings. The intent of the divisions is
# (a) to make it easier to find things, and (b) to order the database so
# that important and frequently-encountered terminal types are near the
# front (so that you'll get reasonable search efficiency from a linear
# search of the termcap form even if you don't use reorder). Minor sections
# usually correspond to manufacturers or standard terminal classes.
# Parenthesized words following manufacturer names are type prefixes or
# product line names used by that manufacturers.
#
# HOW TO READ THE ENTRIES:
#
# The first name in an entry is the canonical name for the model or
# type, last entry is a verbose description. Others are mnemonic synonyms for
# the terminal.
#
# Terminal names look like -
# The part to the left of the dash, if a dash is present, describes the
# particular hardware of the terminal. The part to the right may be used
# for flags indicating special ROMs, extra memory, particular terminal modes,
# or user preferences.
#
# All names should be in lower case, for consistency in typing.
#
# The following are conventionally used suffixes:
# -2p Has two pages of memory. Likewise 4p, 8p, etc.
# -am Enable auto-margin.
# -m Monochrome. Suppress color support
# -mc Magic-cookie. Some terminals (notably older Wyses) can
# only support one attribute without magic-cookie lossage.
# Their base entry is usually paired with another that
# uses magic cookies to support multiple attributes.
# -nam No auto-margin - suppress capability
# -nl No labels - suppress soft labels
# -ns No status line - suppress status line
# -rv Terminal in reverse video mode (black on white)
# -s Enable status line.
# -vb Use visible bell () rather than .
# -w Wide - in 132 column mode.
# If a name has multiple suffixes and one is a line height, that one should
# go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
#
# Entries with embedded plus signs are designed to be included through use/tc
# capabilities, not used as standalone entries.
#
# To avoid search clashes, some older all-numeric names for terminals have
# been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
# All primary names of terminals now have alphanumeric prefixes.
#
# Comments marked "esr" are mostly results of applying the termcap-compiler
# code packaged with ncurses and contemplating the resulting error messages.
# In many cases, these indicated obvious fixes to syntax garbled by the
# composers. In a few cases, I was able to deduce corrected forms for garbled
# capabilities by looking at context. All the information in the original
# entries is preserved in the comments.
#
# In the comments, terminfo capability names are bracketed with <> (angle
# brackets). Termcap capability names are bracketed with :: (colons).
#
# INTERPRETATION OF USER CAPABILITIES
#
# The System V Release 4 and XPG4 terminfo format defines ten string
# capabilities for use by applications, .... In this file, we use
# certain of these capabilities to describe functions which are not covered
# by terminfo. The mapping is as follows:
#
# u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
# u8 terminal answerback description
# u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
# u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
#
# The terminal enquire string should elicit an answerback response
# from the terminal. Common values for will be ^E (on older ASCII
# terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
#
# The cursor position request () string should elicit a cursor position
# report. A typical value (for VT100 terminals) is \E[6n.
#
# The terminal answerback description (u8) must consist of an expected
# answerback string. The string may contain the following scanf(3)-like
# escapes:
#
# %c Accept any character
# %[...] Accept any number of characters in the given set
#
# The cursor position report () string must contain two scanf(3)-style
# %d format elements. The first of these must correspond to the Y coordinate
# and the second to the %d. If the string contains the sequence %i, it is
# taken as an instruction to decrement each value after reading it (this is
# the inverse sense from the cup string). The typical CPR value is
# \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
#
# These capabilities are used by tack(1m), the terminfo action checker
# (distributed with ncurses 5.0).
#
# TABSET FILES
#
# All the entries in this file have been edited to assume that the tabset
# files directory is /usr/share/tabset, in conformance with the File Hierarchy
# Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
# use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
#
# No curses package we know of actually uses these files. If their location
# is an issue, you will have to hand-patch the file locations before compiling
# this file.
#
# REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
#
# As the ANSI/ECMA-48 standard and variants take firmer hold, and as
# character-cell terminals are increasingly replaced by X displays, much of
# this file is becoming a historical document (this is part of the reason for
# the new organization, which puts ANSI types, xterm, Unix consoles,
# and vt100 up front in confidence that this will catch 95% of new hardware).
#
# For the terminal types still alive, I'd like to have manufacturer's
# contact data (Internet address and/or snail-mail + phone).
#
# I'm also interested in enriching the comments so that the latter portions of
# the file do in fact become a potted history of VDT technology as seen by
# UNIX hackers. Ideally, I'd like the headers for each manufacturer to
# include its live/dead/out-of-the-business status, and for as many
# terminal types as possible to be tagged with information like years
# of heaviest use, popularity, and interesting features.
#
# I'm especially interested in identifying the obscure entries listed under
# `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
# wisdom about them gets lost. If you know a lot about obscure old terminals,
# please go to the terminfo resource page, grab the UFO file (ufo.ti), and
# eyeball it for things you can identify and describe.
#
# If you have been around long enough to contribute, please read the file
# with this in mind and send me your annotations.
#
# COPYRIGHTS AND OTHER DELUSIONS
#
# The BSD ancestor of this file had a standard Regents of the University of
# California copyright with dates from 1980 to 1993.
#
# Some information has been merged in from a terminfo file SCO distributes.
# It has an obnoxious boilerplate copyright which I'm ignoring because they
# took so much of the content from the ancestral BSD versions of this file
# and didn't attribute it, thereby violating the BSD Regents' copyright.
#
# Not that anyone should care. However many valid functions copyrights may
# serve, putting one on a termcap/terminfo file with hundreds of anonymous
# contributors makes about as much sense as copyrighting a wall-full of
# graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
#
# This file deliberately has no copyright. It belongs to no one and everyone.
# If you claim you own it, you will merely succeed in looking like a fool.
# Use it as you like. Use it at your own risk. Copy and redistribute freely.
# There are no guarantees anywhere. Svaha!
#
######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
#
# This section describes terminal classes and brands that are still
# quite common.
#
#### Specials
#
# Special "terminals". These are used to label tty lines when you don't
# know what kind of terminal is on it. The characteristics of an unknown
# terminal are the lowest common denominator - they look about like a ti 700.
#
dumb|80-column dumb tty,
am,
cols#80,
bel=^G, cr=^M, cud1=^J, ind=^J,
unknown|unknown terminal type,
gn, use=dumb,
lpr|printer|line printer,
OTbs, hc, os,
cols#132, lines#66,
bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
glasstty|classic glass tty interpreting ASCII control characters,
OTbs, am,
cols#80,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
kcud1=^J, nel=^M^J, .kbs=^H,
vanilla|dumb tty,
OTbs,
bel=^G, cr=^M, cud1=^J, ind=^J,
# This is almost the same as "dumb", but with no prespecified width.
# DEL and ^C are hardcoded to act as kill characters.
# ^D acts as a line break (just like newline).
# It also interprets
# \033];xxx\007
# for compatibility with xterm -TD
9term|Plan9 terminal emulator for X,
am,
OTnl=^J, bel=^G, cud1=^J,
#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
#
# See the end-of-file comment for more on these.
#
# ANSI capabilities are broken up into pieces, so that a terminal
# implementing some ANSI subset can use many of them.
ansi+local1,
cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
ansi+local,
cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
cuu=\E[%p1%dA, use=ansi+local1,
ansi+tabs,
cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
ansi+inittabs,
it#8, use=ansi+tabs,
ansi+erase,
clear=\E[H\E[J, ed=\E[J, el=\E[K,
ansi+rca,
hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
ansi+cup,
cup=\E[%i%p1%d;%p2%dH, home=\E[H,
ansi+rep,
rep=%p1%c\E[%p2%{1}%-%db,
ansi+idl1,
dl1=\E[M, il1=\E[L,
ansi+idl,
dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
ansi+idc,
dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
ansi+arrows,
kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
khome=\E[H,
ansi+sgr|ansi graphic renditions,
blink=\E[5m, invis=\E[8m, rev=\E[7m,
sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
sgr0=\E[0m,
ansi+sgrso|ansi standout only,
rmso=\E[m, smso=\E[7m,
ansi+sgrul|ansi underline only,
rmul=\E[m, smul=\E[4m,
ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
bold=\E[1m,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
dim=\E[2m,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
ansi+csr|ansi scroll-region plus cursor save & restore,
csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
# The normal (ANSI) flavor of "media copy" building block asserts that
# characters sent to the printer do not echo on the screen. DEC terminals
# can also be put into autoprinter mode, where each line is sent to the
# printer as you move off that line, e.g., by a carriage return.
ansi+pp|ansi printer port,
mc5i,
mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
dec+pp|DEC autoprinter mode,
mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
# The IBM PC alternate character set. Plug this into any Intel console entry.
# We use \E[11m for rmacs rather than \E[12m so the string can use the
# ROM graphics for control characters such as the diamond, up- and down-arrow.
# This works with the System V, Linux, and BSDI consoles. It's a safe bet this
# will work with any Intel console, they all seem to have inherited \E[11m
# from the ANSI.SYS de-facto standard.
klone+acs|alternate character set for ansi.sys displays,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
rmacs=\E[10m, smacs=\E[11m,
# Highlight controls corresponding to the ANSI.SYS standard. Most
# console drivers for Intel boxes obey these. Makes the same assumption
# about \E[11m as klone+acs. True ANSI/ECMA-48 would have ,
# , but this isn't a documented feature of ANSI.SYS.
klone+sgr|attribute control for ansi.sys displays,
blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
rmso=\E[m, rmul=\E[m,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m,
sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
use=klone+acs,
# Most Intel boxes do not treat "invis" (invisible) text.
klone+sgr8|attribute control for ansi.sys displays,
invis=\E[8m,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
use=klone+sgr,
# Highlight controls corresponding to the ANSI.SYS standard. *All*
# console drivers for Intel boxes obey these. Does not assume \E[11m will
# work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
# diamond and arrow characters under curses.
klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
rmul=\E[m,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
use=klone+acs,
# KOI8-R (RFC1489) acs (alternate character set)
# From: Qing Long , 24 Feb 1996.
klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225,
rmacs=\E[10m, smacs=\E[11m,
# ANSI.SYS color control. The setab/setaf caps depend on the coincidence
# between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
# but equivalent strings that don't rely on that coincidence:
# setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
# setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
# The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
# They match a subset of ECMA-48.
klone+color|color control for ansi.sys and ISO6429-compatible displays,
colors#8, ncv#3, pairs#64,
op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
# This is better than klone+color, it doesn't assume white-on-black as the
# default color pair, but many `ANSI' terminals don't grok the cap.
ecma+color|color control for ECMA-48-compatible terminals,
AX,
colors#8, ncv#3, pairs#64,
op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
# Attribute control for ECMA-48-compatible terminals
ecma+sgr|attribute capabilities for true ECMA-48 terminals,
rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
# For comparison, here are all the capabilities implied by the Intel
# Binary Compatibility Standard (level 2) that fit within terminfo.
# For more detail on this rather pathetic standard, see the comments
# near the end of this file.
ibcs2|Intel Binary Compatibility Standard prescriptions,
cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT,
rmam=\E[?7l, sc=\E7, smam=\E[?7h, tbc=\E[g,
vpa=\E[%i%p1%dd,
#### ANSI/ECMA-48 terminals and terminal emulators
#
# See near the end of this file for details on ANSI conformance.
# Don't mess with these entries! Lots of other entries depend on them!
#
# This section lists entries in a least-capable to most-capable order.
# if you're in doubt about what `ANSI' matches yours, try them in that
# order and back off from the first that breaks.
# ansi-mr is for ANSI terminals with ONLY relative cursor addressing
# and more than one page of memory. It uses local motions instead of
# direct cursor addressing, and makes almost no assumptions. It does
# assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
ansi-mr|mem rel cup ansi,
am, xon,
cols#80, lines#24, use=vanilla, use=ansi+erase,
use=ansi+local1,
# ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
# beware of screen size problems and memory relative cursor addressing.
ansi-mini|any ansi terminal with pessimistic assumptions,
am, xon,
cols#80, lines#24, use=vanilla, use=ansi+cup,
use=ansi+erase,
# ansi-mtabs adds relative addressing and minimal tab support
ansi-mtabs|any ansi terminal with pessimistic assumptions,
it#8,
ht=^I, use=ansi-mini, use=ansi+local1,
# ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
#
# The following is an entry for the full ANSI 3.64 (1977). It lacks
# padding, but most terminals using the standard are "fast" enough
# not to require any -- even at 9600 bps. If you encounter problems,
# try including the padding specifications.
#
# Note: the :as: and :ae: specifications are not implemented here, for
# the available termcap documentation does not make clear WHICH alternate
# character set to specify. ANSI 3.64 seems to make allowances for several.
# Please make the appropriate adjustments to fit your needs -- that is
# if you will be using alternate character sets.
#
# There are very few terminals running the full ANSI 3.64 standard,
# so I could only test this entry on one verified terminal (Visual 102).
# I would appreciate the results on other terminals sent to me.
#
# Please report comments, changes, and problems to:
#
# U.S. MAIL: Hugh Hansard
# Box: 22830
# Emory University
# Atlanta, GA. 30322.
#
# USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
#
# (Added vt100 , to quiet a tic warning --esr)
ansi77|ansi 3.64 standard 1977 version,
OTbs, am, mir,
cols#80, it#8, lines#24,
bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
smso=\E[7m, smul=\E[4m,
# Procomm and some other ANSI emulations don't recognize all of the ANSI-
# standard capabilities. This entry deletes , , , , and
# / capabilities, forcing curses to use repetitions of ,
# , and . Also deleted and , as QModem up to
# 5.03 doesn't recognize these. Finally, we delete and , which seem
# to confuse many emulators. On the other hand, we can count on these programs
# doing //. Older versions of this entry featured
# , but now seems to be more common under
# ANSI.SYS influence.
# From: Eric S. Raymond Oct 30 1995
pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
OTbs, am, mir, msgr,
cols#80, it#8, lines#24,
bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
use=klone+sgr-dumb,
pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
lines#25, use=pcansi-m,
pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
lines#33, use=pcansi-m,
pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
lines#43, use=pcansi-m,
# The color versions. All PC emulators do color...
pcansi|ibm-pc terminal programs claiming to be ansi,
use=klone+color, use=pcansi-m,
pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
lines#25, use=pcansi,
pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
lines#33, use=pcansi,
pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
lines#43, use=pcansi,
# ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
# If you want pound signs rather than dollars, replace `B' with `A'
# in the , , , and capabilities.
# From: Eric S. Raymond Nov 6 1995
ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
mc5i,
cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
vpa=\E[%i%p1%dd, use=pcansi-m,
ansi+enq|ncurses extension for ANSI ENQ,
u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
u9=\E[c,
# ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
# standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
# From: Eric S. Raymond Nov 6 1995
ansi|ansi/pc-term compatible with color,
use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
# ansi-generic is a vanilla ANSI terminal. This is assumed to implement
# all the normal ANSI stuff with no extensions. It assumes
# insert/delete line/char is there, so it won't work with
# vt100 clones. It assumes video attributes for bold, blink,
# underline, and reverse, which won't matter much if the terminal
# can't do some of those. Padding is assumed to be zero, which
# shouldn't hurt since xon/xoff is assumed.
ansi-generic|generic ansi standard terminal,
am, xon,
cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
use=ansi+rca, use=ansi+erase, use=ansi+tabs,
use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
use=ansi+sgrbold, use=ansi+arrows,
#### DOS ANSI.SYS variants
#
# This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
# documentation (except for the keyboard key reassignment feature, which
# doesn't fit the model well). The klone+acs sequences were valid
# though undocumented. The capability is untested but should work for
# keys F1-F10 (%p1 values outside this range will yield unpredictable results).
# From: Eric S. Raymond Nov 7 1995
ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
OTbs, am, mir, msgr, xon,
cols#80, lines#25,
clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
u7=\E[6n, use=klone+color, use=klone+sgr8,
# Keypad: Home=\0G Up=\0H PrPag=\0I
# ka1,kh kcuu1 kpp,ka3
#
# Left=\0K 5=\0L Right=\0M
# kcub1 kb2 kcuf1
#
# End=\0O Down=\0P NxPag=\0Q
# kc1,kend kcud1 kc3,knp
#
# Ins=\0R Del=\0S
# kich1 kdch1
#
# On keyboard with 12 function keys,
# shifted f-keys: F13-F24
# control f-keys: F25-F36
# alt f-keys: F37-F48
# The shift/control/alt keys do not modify each other, but alt overrides both,
# and control overrides shift.
#
# capability for F1-F48 -TD
ansi.sys|ANSI.SYS 3.1 and later versions,
el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%p1%{13}%<%t%'z'%e%p1%{23}%<%t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t%'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
use=ansi.sys-old,
#
# Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
# This should only be used when the terminal emulator cannot redefine the keys.
# Since redefining keys with ansi.sys also affects PC-DOS programs, the key
# definitions must be restored. If the terminal emulator is quit while in vi
# or others using /, the keypad will not be defined as per PC-DOS.
# The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
# (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
# does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
# Note that is always BS, because PC-dos can tolerate this change.
# Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
# Consequently the End keypad key could not be set (it is relatively safe and
# actually useful because it sends ^@ O, which beeps and opens a line above).
ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
use=ansi.sys,
#
# Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
use=ansi.sys,
#
# See ansi.sysk and nansi.sys above.
nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
use=ansi.sysk,
#### Atari ST terminals
# From Guido Flohr .
#
tw52|tw52-color|Toswin window manager with color,
bce,
colors#16, pairs#256,
oc=\Eb?\Ec0, op=\Eb?\Ec0,
setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
use=tw52-m,
tw52-m|Toswin window manager monochrome,
ul,
ma#999,
bold=\Eya, dch1=\Ea, dim=\EyB,
is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
smso=\EyQ, smul=\EyH, use=at-m,
tt52|Atari TT medium and high resolution,
lines#30, use=at-color,
st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
bce,
colors#16, pairs#256,
is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
use=st52,
st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
am, eo, mir, npc,
cols#80, it#8, lines#24,
bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=^M, cub1=\ED,
cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
il1=\EL, ind=^J, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177,
kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
kund=\EK, nel=^M^J, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
tw100|toswin vt100 window mgr,
eo, mir, msgr, xon,
colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
clear=\E[2J\E[H, cnorm=\Ee, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=^J, is2=\E<\E)0, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177,
kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
rmso=\E[m, rmul=\E[m,
rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
sc=\E7,
setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
# The entries for stv52 and stv52pc probably need a revision.
stv52|MiNT virtual console,
am, msgr,
cols#80, it#8, lines#30,
bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
stv52pc|MiNT virtual console with PC charset,
am, msgr,
cols#80, it#8, lines#30,
acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j\331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y\363z\362{\343|\366}\234~\371,
bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
smso=\Ep, smul=\EyH,
# From: Simson L. Garfinkel
atari-old|atari st,
OTbs, am,
cols#80, it#8, lines#25,
clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
# UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
# From: Paul M. Aoki
uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
lines#49,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
use=vt220,
# MiNT VT52 emulation. 80 columns, 25 rows.
# MiNT is Now TOS, the operating system which comes with all Ataris now
# (mainly Atari Falcon). This termcap is for the VT52 emulation you get
# under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
# From: Per Persson , 27 Feb 1996
st52-old|Atari ST with VT52 emulation,
am, km,
cols#80, lines#25,
bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
smcup=\Ee, smso=\Ep,
#### Apple Terminal.app
# nsterm*|Apple_Terminal - AppKit Terminal.app
#
# Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
# OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
# Server and Mac OS X operating systems. There is also a
# "terminal.app" in GNUStep, but I believe it to be an unrelated
# codebase and I have not attempted to describe it here.
#
# For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
# are pretty much on your own. Use "nsterm-7-m" and hope for the best.
# You might also try "nsterm-7" and "nsterm-old" if you suspect your
# version supports color.
#
# To determine the version of Terminal.app you're using by running:
#
# echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
#
# For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
#
# For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
#
# For Apple_Terminal v71+/v100+, use "nsterm-bce".
#
# For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
#
# For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
#
# For all earlier versions (Apple_Terminal), try "nsterm-7-m"
# (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
# might work too, but really you're on your own here since these
# systems are very obsolete and I can't test them. I do welcome
# patches, though :).
# Other Terminals:
#
# For GNUstep_Terminal, you're probably best off using "linux" or
# writing your own terminfo.
# For MacTelnet, you're on your own. It's a different codebase, and
# seems to be somewhere between "vt102", "ncsa" and "xterm-color".
# For iTerm.app, see "iterm".
#
# The AppKit Terminal.app descriptions all have names beginning with
# "nsterm". Note that the statusline (-s) versions use the window
# titlebar as a phony status line, and may produce warnings during
# compilation as a result ("tsl uses 0 parameters, expected 1".)
# Ignore these warnings, or even ignore these entries entirely. Apps
# which need to position the cursor or do other fancy stuff inside the
# status line won't work with these entries. They're primarily useful
# for programs like Pine which provide simple notifications in the
# status line. Please note that non-ASCII characters don't work right
# in the status line, since Terminal.app incorrectly interprets their
# Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
# versions) or only accepts status lines consisting entirely of
# characters from the first 256 Unicode positions (including C1 but
# not C0 or DEL.)
#
# The Mythology* of AppKit Terminal.app:
#
# In the days of NeXTSTep 0.x and 1.x there were two incompatible
# bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
# shareware replacement for Terminal called "Stuart" which NeXT bought
# and used as the basis for the Terminal.app in NeXTstep 2+,
# OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
# don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
# capabilities for the early versions, but I believe that the
# TERM_PROGRAM_VERSION may have been reset at some point.
#
# The early versions were tailored to the NeXT character set. Sometime
# after the Apple aquisition the encoding was swiched to MacRoman
# (initally with serious altcharset bugs due to incomplete conversion
# of the old NeXT code,) and then later to UTF-8. Alos sometime during
# or just prior to the early days of Mac OS X, the Terminal grew ANSI
# 8-color support (initially buggy when combined with attributes, but
# that was later fixed.) More recently, around Mac OS X version 10.3
# or so (Terminal.app v100+) xterm-like 16-color support was added. In
# some versions (for instance 133-1 which shipped with Mac OS X
# version 10.4) this suffered from the bug, but that seems to
# have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
#
# In the early days of Mac OS X the terminal was fairly buggy and
# would routinely crash under load. Many of these bugs seem to have
# been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
# some may still remain. This change seems to correspond to
# Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
# it did previously.
#
# * This may correspond with what actually happened, but I don't
# know. It is based on guesswork, hearsay, private correspondence,
# my faulty memory, and the following online sources and references:
#
# [1] "Three Scotts and a Duane" by Simson L. Garfinkel
# http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
#
# [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
# https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
#
# * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
# "nsterm" to comply with the name length and case conventions and
# limitations of various software packages [notably Solaris terminfo
# and UNIX.] A single Apple_Terminal alias is retained for
# backwards-compatbility.
#
# * Added function key support (F1-F4). These only work in Terminal.app
# version 51, hopefully the capabilities won't cause problems for people
# using version 41.
#
# * Added "full color" (-c) entries which support the 16-color mode in
# version 51.
#
# * By default, version 51 uses UTF-8 encoding with broken altcharset
# support, so "ASCII" (-7) entries without altcharset support were
# added.
# nsterm - AppKit Terminal.app
#
# Apple's Mac OS X includes a Terminal.app derived from the old NeXT
# Terminal.app. It is a partial VT100 emulation with some xterm-like
# extensions. This terminfo was written to describe versions 41
# (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
# version 10.1) of Terminal.app.
#
# Terminal.app runs under the Mac OS X Quartz windowing system (and
# other AppKit-supported windowing systems.) On the Mac OS X machine I
# use, the executable for Terminal.app is:
# /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
#
# If you're looking for a description of the full-screen system
# console which runs under Apple's Darwin operating system on PowerPC
# platforms, see the "xnuppc" entry instead.
#
# There were no function keys in version 41. In version 51, there are
# four working function keys (F1, F2, F3 and F4.) The function keys
# are included in all of these entries.
#
# It does not support mouse pointer position reporting. Under some
# circumstances the cursor can be positioned using option-click; this
# works by comparing the cursor position and the selected position,
# and simulating enough cursor-key presses to move the cursor to the
# selected position. This technique fails in all but the simplest
# applications.
#
# It provides partial ANSI color support (background colors interacted
# badly with bold in version 41, though, as reflected in :ncv:.) The
# monochrome (-m) entries are useful if you've disabled color support
# or use a monochrome monitor. The full color (-c) entries are useful
# in version 51, which doesn't exhibit the background color bug. They
# also enable an xterm-compatible 16-color mode.
#
# The configurable titlebar is set using xterm-compatible sequences;
# it is used as a status bar in the statusline (-s) entries. Its width
# depends on font sizes and window sizes, but 50 characters seems to
# be the default for an 80x24 window.
#
# The MacRoman character encoding is used for some of the alternate
# characters in the "MacRoman" entries; the "ASCII" (-7) entries
# disable alternate character set support entirely, and the "VT100"
# (-acs) entries rely instead on Terminal.app's own buggy VT100
# graphics emulation, which seems to think the character encoding is
# the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
# are useful in Terminal.app version 51, which supports UTF-8 and
# other ASCII-compatible character encodings but does not correctly
# implement VT100 graphics; once VT100 graphics are correctly
# implemented in Terminal.app, the "VT100" (-acs) entries should be
# usable in any ASCII-compatible character encoding [except perhaps
# in UTF-8, where some experts argue for disallowing alternate
# characters entirely.]
#
# Terminal.app reports "vt100" as the terminal type, but exports
# several environment variables which may aid detection in a shell
# profile (i.e. .profile or .login):
#
# TERM=vt100
# TERM_PROGRAM=Apple_Terminal
# TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
# TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
#
# For example, the following Bourne shell script would detect the
# correct terminal type:
#
# if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
# then
# export TERM
# if [ :"$TERM_PROGRAM_VERSION" = :41 ]
# then
# TERM="nsterm-old"
# else
# TERM="nsterm-c-7"
# fi
# fi
#
# In a C shell derivative, this would be accomplished by:
#
# if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
# if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
# if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
# setenv TERM "nsterm-old"
# else
# setenv TERM "nsterm-c-7"
# endif
# endif
# endif
# The '+' entries are building blocks
nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
am, bw, msgr, xenl, xon,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
invis=\E[8m, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
enacs=\E(B\E)0, rmacs=^O,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, use=nsterm+7,
nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245,
enacs=\E(B\E)0, rmacs=^O,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, use=nsterm+7,
# compare with xterm+sl-twm
nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
wsl#50, use=xterm+sl-twm,
nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
op=\E[0m, use=ibm+16color,
nsterm+c41|AppKit Terminal.app v41 color support,
colors#8, ncv#37, pairs#64,
op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
# These are different combinations of the building blocks
# ASCII charset (-7)
nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
use=nsterm+7,
nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
use=nsterm+s, use=nsterm+7,
nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
use=nsterm+c41, use=nsterm+7,
nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
use=nsterm+c, use=nsterm+7,
nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
use=nsterm+s, use=nsterm+c41, use=nsterm+7,
nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
use=nsterm+s, use=nsterm+c, use=nsterm+7,
# VT100 alternate-charset (-acs)
nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
use=nsterm+acs,
nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
use=nsterm+s, use=nsterm+acs,
nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
use=nsterm+c41, use=nsterm+acs,
nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
use=nsterm+c, use=nsterm+acs,
nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
use=nsterm+s, use=nsterm+c, use=nsterm+acs,
# MacRoman charset
nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
use=nsterm+mac,
nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
use=nsterm+s, use=nsterm+mac,
nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
use=nsterm+c41, use=nsterm+mac,
nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
use=nsterm+c, use=nsterm+mac,
nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
use=nsterm+s, use=nsterm+c, use=nsterm+mac,
# In Mac OS X version 10.5 the format of the preferences has changed
# and a new, more complex technique is needed, e.g.,
#
# python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
# "NSUserDefaults");ud=NSUserDefaults.alloc();
# ud.init();prefs=ud.persistentDomainForName_(
# "com.apple.Terminal");prefs["Window Settings"][
# prefs["Default Window Settings"]]["TerminalType"
# ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
# "com.apple.Terminal")' nsterm-16color
#
# and it is still not settable from the preferences dialog. This is
# tracked under rdar://problem/7365108 and rdar://problem/7365134
# in Apple's bug reporter.
#
# In OS X 10.7 (Leopard) the TERM which can be set in the preferences dialog
# defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
# vt52, vt100, vt102 and xterm.
nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
bw@, mir, npc,
civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
kLFT5=\E[5D, kRIT5=\E[5C, use=nsterm-c-s-acs,
# The versions of Terminal.app in Mac OS X version 10.3.x seem to have
# the background color erase feature. The newer version 240.2 in Mac OS X
# version 10.5 does not.
#
# This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
# and D P Schreber comparing to nsterm-c-s-acs.
#
# In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
# can be set in Terminal.app, e.g.,
#
# defaults write com.apple.Terminal TermCapString nsterm-bce
#
# and that it is not set in Terminal's preferences dialog.
#
# Modified for OS X 10.8, omitting bw based on testing with tack -TD
#
# Notes:
# * The terminal description matches the default settings.
# * The keyboard is configurable via a dialog.
# * By default khome, kend, knext and kprev are honored only with a
# shift-modifier.
# * There are bindings for control left/right arrow (but not up/down).
# Added those to nsterm-16color, which is the version used for OS X 10.6
# * "Allow VT100 application keypage mode" is by default disabled.
# There is no way to press keypad-comma unless application mode is enabled
# and used.
# * 132-column mode stopped working during vttest's tests. Consider it broken.
# * CHT, REP, SU, SD are buggy.
# * ECH works (also in Leopard), but is not used here for compatibility.
# * The terminal preferences dialog replaces xterm-color by xterm-16color and
# xterm-256color. However, it adds "nsterm", so it is possible to use the
# nsterm entry from this file to override the MacPorts (20110404) or
# system (20081102) copy of this file.
# + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
# dialog defaults to xterm-256color. Alternative selections are ansi,
# dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However,
# the menu says "Declare terminal as" without promising to actually emulate
# the corresponding terminals. Indeed, changing TERM does not affect the
# emulation itself. This means that
# + the function-keys do not match for dtterm for kf1-kf4 as well as
# khome/kend
# + the color model is the same for each setting of TERM (does not match
# ansi or dtterm).
# + the shift/control/meta key modifiers from rxvt and xterm variants are not
# recognised except for a few special cases, i.e., kRIT5 and kLFT5.
# + the vt52 emulation does not give a usable shell because screen-clearing
# does not work as expected.
# + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
bce, use=nsterm-16color,
# This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
# TERM_PROGRAM_VERSION=309
# Earlier reports state that these differences also apply to OS X 10.7 (Lion),
# TERM_PROGRAM_VERSION=303
nsterm-256color|Terminal.app in OS X 10.8,
ccc@,
initc@, use=xterm+256color, use=nsterm-bce,
# This is an alias which should always point to the "current" version
nsterm|Apple_Terminal|AppKit Terminal.app,
use=nsterm-256color,
# iTerm.app from http://iterm.sourceforge.net/ is an alternative (and
# more featureful) terminal emulator for Mac OS X. It is similar
# enough in capabilities to nsterm-16color that I have derived this
# description from that one, but as far as I know they share no code.
# Many of the features are user-configurable, but I attempt only to
# describe the default configuration.
#
# NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
# disabled.
iTerm.app|iTerm.app terminal emulator for Mac OS X,
bce, bw@, ccc@,
csr@, initc@, kend=\EOF, khome=\EOH, use=xterm+256color,
use=nsterm-16color,
# xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
#
# On PowerPC platforms, Apple's Darwin operating system uses a
# full-screen system console derived from a NetBSD framebuffer
# console. It is an ANSI-style terminal, and is not really VT-100
# compatible.
#
# Under Mac OS X, this is the system console driver used while in
# single-user mode [reachable by holding down Command-S during the
# boot process] and when logged in using console mode [reachable by
# typing ">console" at the graphical login prompt.]
#
# If you're looking for a description of the Terminal.app terminal
# emulator which runs under the Mac OS X Quartz windowing system (and
# other AppKit-supported windowing systems,) see the "nsterm"
# entry instead.
#
# NOTE: Under Mac OS X version 10.1, the default login window does not
# prompt for user name, instead requiring an icon to be selected from
# a list of known users. Since the special ">console" login is not in
# this list, you must make one of two changes in the Login Window
# panel of the Login section of System Prefs to make the special
# ">console" login accessible. The first option is to enable 'Show
# "Other User" in list for network users', which will add a special
# "Other..." icon to the graphical login panel. Selecting "Other..."
# will present the regular graphical login prompt. The second option
# is to change the 'Display Login Window as:' setting to 'Name and
# password entry fields', which replaces the login panel with a
# graphical login prompt.
#
# There are no function keys, at least not in Darwin 1.3.
#
# It has no mouse support.
#
# It has full ANSI color support, and color combines correctly with
# all three supported attributes: bold, inverse-video and underline.
# However, bold colored text is almost unreadable (bolding is
# accomplished using shifting and or-ing, and looks smeared) so bold
# has been excluded from the list of color-compatible attributes
# [using (ncv)]. The monochrome entry (-m) is useful if you use a
# monochrome monitor.
#
# There is one serious bug with this terminal emulation's color
# support: repositioning the cursor onto a cell with non-matching
# colors obliterates that cell's contents, replacing it with a blank
# and displaying a colored cursor in the "current" colors. There is
# no complete workaround at present [other than using the monochrome
# (-m) entries,] but removing the (msgr) capability seemed to help.
#
# The "standout" chosen was simple reverse-video, although a colorful
# standout might be more aesthetically pleasing. Similarly, the bold
# chosen is the terminal's own smeared bold, although a simple
# color-change might be more readable. The color-bold (-b) entries
# uses magenta colored text for bolding instead. The fancy color (-f
# and -f2) entries use color for bold, standout and underlined text
# (underlined text is still underlined, though.)
#
# Apparently the terminal emulator does support a VT-100-style
# alternate character set, but all the alternate character set
# positions have been left blank in the font. For this reason, no
# alternate character set capabilities have been included in this
# description. The console driver appears to be ASCII-only, so (enacs)
# has been excluded [although the VT-100 sequence does work.]
#
# The default Mac OS X and Darwin installation reports "vt100" as the
# terminal type, and exports no helpful environment variables. To fix
# this, change the "console" entry in /etc/ttys from "vt100" to
# "xnuppc-WxH", where W and H are the character dimensions of your
# console (see below.)
#
# The font used by the terminal emulator is apparently one originally
# drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
# file includes descriptions for the following geometries:
#
# Pixels Characters Entry Name (append -m for monochrome)
# -------------------------------------------------------------------
# 640x400 80x25 xnuppc-80x25
# 640x480 80x30 xnuppc-80x30
# 720x480 90x30 xnuppc-90x30
# 800x600 100x37 xnuppc-100x37
# 896x600 112x37 xnuppc-112x37
# 1024x640 128x40 xnuppc-128x40
# 1024x768 128x48 xnuppc-128x48
# 1152x768 144x48 xnuppc-144x48
# 1280x1024 160x64 xnuppc-160x64
# 1600x1024 200x64 xnuppc-200x64
# 1600x1200 200x75 xnuppc-200x75
# 2048x1536 256x96 xnuppc-256x96
#
# The basic "xnuppc" entry includes no size information, and the
# emulator includes no reporting capability, so you'll be at the mercy
# of the TTY device (which reports incorrectly on my hardware.) The
# color-bold entries do not include size information.
# The '+' entries are building blocks
xnuppc+basic|Darwin PowerPC Console basic capabilities,
am, bce, mir, xenl,
it#8,
bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
xnuppc+c|Darwin PowerPC Console ANSI color support,
colors#8, ncv#32, pairs#64,
op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
xnuppc+b|Darwin PowerPC Console color-bold support,
ncv#32,
bold=\E[35m,
sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
use=xnuppc+basic,
xnuppc+f|Darwin PowerPC Console fancy color support,
ncv#35,
sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m,
smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
ncv#35,
bold=\E[33m,
sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
# Building blocks for specific screen sizes
xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
cols#80, lines#25,
xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
cols#80, lines#30,
xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
cols#90, lines#30,
xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
cols#100, lines#37,
xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
cols#112, lines#37,
xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
cols#128, lines#40,
xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
cols#128, lines#48,
xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
cols#144, lines#48,
xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
cols#160, lines#64,
xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
cols#200, lines#64,
xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
cols#200, lines#75,
xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
cols#256, lines#96,
# These are different combinations of the building blocks
xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
use=xnuppc+basic,
xnuppc|darwin|Darwin PowerPC Console (color),
use=xnuppc+c, use=xnuppc+basic,
xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
use=xnuppc+b,
xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
use=xnuppc+b, use=xnuppc+c,
xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
use=xnuppc+f,
xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
use=xnuppc+f, use=xnuppc+c,
xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
use=xnuppc+f2,
xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
use=xnuppc+f2, use=xnuppc+c,
# Combinations for specific screen sizes
xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
use=xnuppc+80x25, use=xnuppc+basic,
xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
use=xnuppc+80x30, use=xnuppc+basic,
xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
use=xnuppc+90x30, use=xnuppc+basic,
xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
use=xnuppc+100x37, use=xnuppc+basic,
xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
use=xnuppc+112x37, use=xnuppc+basic,
xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
use=xnuppc+128x40, use=xnuppc+basic,
xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
use=xnuppc+128x48, use=xnuppc+basic,
xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
use=xnuppc+144x48, use=xnuppc+basic,
xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
use=xnuppc+160x64, use=xnuppc+basic,
xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
use=xnuppc+200x64, use=xnuppc+basic,
xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
use=xnuppc+200x75, use=xnuppc+basic,
xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
use=xnuppc+256x96, use=xnuppc+basic,
xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
#### BeOS
#
# BeOS entry for Terminal program Seems to be almost ANSI
beterm|BeOS Terminal,
am, eo, mir, msgr, xenl, xon,
colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
vpa=\E[%i%p1%dd,
#### Linux consoles
#
# This entry is good for the 1.2.13 or later version of the Linux console.
#
# ***************************************************************************
# * *
# * WARNING: *
# * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
# * character. Here are the keymap replacement lines that will set this up: *
# * *
# keycode 15 = Tab Tab
# alt keycode 15 = Meta_Tab
# shift keycode 15 = F26
# string F26 ="\033[Z"
# * *
# * This has to use a key slot which is unfortunate (any unused one will *
# * do, F26 is the higher-numbered one). The change ought to be built *
# * into the kernel tables. *
# * *
# ***************************************************************************
#
# All linux kernels since 1.2.13 (at least) set the screen size
# themselves; this entry assumes that capability.
#
linux-basic|linux console,
am, bce, eo, mir, msgr, xenl, xon,
it#8, ncv#18, U8#1,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
use=ecma+color,
linux-m|Linux console no color,
colors@, pairs@,
setab@, setaf@, setb@, setf@, use=linux,
# The 1.3.x kernels add color-change capabilities; if yours doesn't have this
# and it matters, turn off . The %02x escape used to implement this is
# not supposedly back-portable to older SV curses (although it has worked fine
# on Solaris for several years) and not supported in ncurses versions before
# 1.9.9.
linux-c-nc|linux console with color-change,
ccc,
initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
oc=\E]R, use=linux-basic,
# From: Dennis Henriksen , 9 July 1996
linux-c|linux console 1.3.6+ for older ncurses,
ccc,
initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
oc=\E]R, use=linux-basic,
# The 2.2.x kernels add a private mode that sets the cursor type; use that to
# get a block cursor for cvvis.
# reported by Frank Heckenbach .
linux2.2|linux 2.2.x console,
civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
cvvis=\E[?25h\E[?8c, use=linux-c-nc,
# Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
# http://lkml.indiana.edu/hypermail/linux/kernel/0602.2/0868.html
# Using SI/SO has the drawback that it confuses screen. SCS would work.
# However, SCS is buggy (see comment in Debian #515609) -TD
# Further, this breaks longstanding workarounds for Linux console's line
# drawing (see Debian 665959) -TD
linux2.6|linux 2.6.x console,
rmacs=^O,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, use=linux2.2,
# The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
# It is the same as xterm's erase-saved-lines feature.
linux3.0|linux 3.0 kernels,
E3=\E[3;J, use=linux2.6,
# This is Linux console for ncurses.
linux|linux console,
use=linux2.2,
# Subject: linux 2.6.26 vt back_color_erase
# Changes to the Linux console driver broke bce model as reported in
# https://bugzilla.novell.com/show_bug.cgi?id=418613
# apparently from
# http://lkml.org/lkml/2008/4/26/305
# http://lkml.org/lkml/2008/10/3/66
linux2.6.26|linux console w/o bce,
bce@, use=linux2.6,
# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
linux-nic|linux with ich/ich1 suppressed for non-curses programs,
ich@, ich1@, use=linux,
# This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
# acsc entry from Pavel Roskin" , 29 Sep 1997.
linux-koi8|linux with koi8 alternate character set,
acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224,
use=linux, use=klone+koi8acs,
# Another entry for KOI8-r with Qing Long's acsc.
# (which one better complies with the standard?)
linux-koi8r|linux with koi8-r alternate character set,
use=linux, use=klone+koi8acs,
# Entry for the latin1 and latin2 fonts
linux-lat|linux with latin1 or latin2 alternate character set,
acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
use=linux,
# This uses graphics from VT codeset instead of from cp437.
# reason: cp437 (aka "straight to font") is not functional under luit.
# from: Andrey V Lukyanov .
linux-vt|linux console using VT codes for graphics,
acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
smpch@, use=linux,
# This is based on the Linux console (relies on the console to perform some
# of the functionality), but does not recognize as many control sequences.
# The program comes bundled with an old (circa 1998) copy of the Linux
# console terminfo. It recognizes some non-ANSI/VT100 sequences such as
# \E* move cursor to home, as as \E[H
# \E,X same as \E(X
# \EE move cursor to beginning of row
# \E[y,xf same as \E[y,xH
#
# Note: The status-line support is buggy (dsl does not work).
kon|kon2|jfbterm|Kanji ON Linux console,
ccc@, hs,
civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
use=linux,
# 16-color linux console entry; this works with a 256-character
# console font but bright background colors turn into dim ones when
# you use a 512-character console font. This uses bold for bright
# foreground colors and blink for bright background colors.
linux-16color|linux console with 16 colors,
colors#16, ncv#63, pairs#256,
setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;21%;m,
use=linux,
# bterm (bogl 0.1.18)
# Implementation is in bogl-term.c
# Key capabilities from linux terminfo entry
#
# Notes:
# bterm only supports acs using wide-characters, has case for these: qjxamlkut
# bterm does not support sgr, since it only processes one parameter -TD
bterm|bogl virtual terminal,
am, bce,
colors#8, cols#80, lines#24, pairs#64,
acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J,
kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J,
op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
#### Mach
#
# From: Matthew Vernon
mach|Mach Console,
am, km,
cols#80, it#8, lines#25,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
smso=\E[7m, smul=\E[4m,
mach-bold|Mach Console with bold instead of underline,
rmul=\E[0m, smul=\E[1m, use=mach,
mach-color|Mach Console with ANSI color,
colors#8, pairs#64,
dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
# From: Samuel Thibault
# Source: git://git.sv.gnu.org/hurd/gnumach.git
# Files: i386/i386at/kd.c
#
# Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
mach-gnu|GNU Mach,
acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
indn=\E[%p1%dS, invis=\E[8m, nel=\EE, rin=\E[%p1%dT,
sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m,
use=mach,
mach-gnu-color|Mach Console with ANSI color,
colors#8, pairs#64,
op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
setaf=\E[3%p1%dm, use=mach-gnu,
# From: Marcus Brinkmann
# http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
#
# Comments in the original are summarized here:
#
# hurd uses 8-bit characters (km).
#
# Although it doesn't do XON/XOFF, we don't want padding characters (xon).
#
# Regarding compatibility to vt100: hurd doesn't specify , as we don't
# have the eat_newline_glitch. It doesn't support setting or removing tab
# stops (hts/tbc).
#
# hurd uses ^H instead of \E[D for cub1, as only ^H implements and it is
# one byte instead three.
#
# is not included because hurd has insert mode.
#
# hurd doesn't use ^J for scrolling, because this could put things into the
# scrollback buffer.
#
# gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
# This is a GNU extension.
#
# The original has commented-out ncv, but is restored here.
#
# Reading the source, RIS resets cnorm, but not xmous.
hurd|The GNU Hurd console server,
am, bce, bw, eo, km, mir, msgr, xenl, xon,
colors#8, it#8, ncv#18, pairs#64,
acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
gsbom=\E[>1h,
#### QNX
#
# QNX 4.0 Console
# Michael's original version of this entry had , ,
# ; this was so terminfo applications could write the lower
# right corner without triggering a scroll. The ncurses terminfo library can
# handle this case with the capability, and prefers for better
# optimization. Bug: The capability resets attributes.
# From: Michael Hunter 30 Jul 1996
# (removed: )
qnx|qnx4|qnx console,
daisy, km, mir, msgr, xhpa, xt,
colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263,
bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
kDL=\377\366, kEND=\377\301, kEOL=\377\311,
kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
kclo=\377\343, kclr=\377\341, kcmd=\377\245,
kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
kext=\377\270, kf1=\377\201, kf10=\377\212,
kf11=\377\256, kf12=\377\257, kf13=\377\213,
kf14=\377\214, kf15=\377\215, kf16=\377\216,
kf17=\377\217, kf18=\377\220, kf19=\377\221,
kf2=\377\202, kf20=\377\222, kf21=\377\223,
kf22=\377\224, kf23=\377\333, kf24=\377\334,
kf25=\377\225, kf26=\377\226, kf27=\377\227,
kf28=\377\230, kf29=\377\231, kf3=\377\203,
kf30=\377\232, kf31=\377\233, kf32=\377\234,
kf33=\377\235, kf34=\377\236, kf35=\377\276,
kf36=\377\277, kf37=\377\321, kf38=\377\322,
kf39=\377\323, kf4=\377\204, kf40=\377\324,
kf41=\377\325, kf42=\377\326, kf43=\377\327,
kf44=\377\330, kf45=\377\331, kf46=\377\332,
kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
khlp=\377\350, khome=\377\240, khts=\377\342,
kich1=\377\253, kil1=\377\273, kind=\377\261,
kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
knp=\377\252, knxt=\377\312, kopn=\377\357,
kopt=\377\353, kpp=\377\242, kprt=\377\255,
kprv=\377\302, krdo=\377\336, kref=\377\354,
kres=\377\360, krfr=\377\347, kri=\377\271,
krmir=\377\313, krpl=\377\362, krst=\377\352,
ksav=\377\361, kslt=\377\247, kspd=\377\335,
ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
smso=\E(, smul=\E[,
#
#
qnxt|qnxt4|QNX4 terminal,
crxm, use=qnx4,
#
qnxm|QNX4 with mouse events,
maddr#1,
chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
smicm=\E/>2h, use=qnx4,
#
qnxw|QNX4 windows,
xvpa, use=qnxm,
#
# Monochrome QNX4 terminal or console. Setting this terminal type will
# allow an application running on a color console to behave as if it
# were a monochrome terminal. Output will be through stdout instead of
# console writes because the term routines will recognize that the
# terminal name starts with 'qnxt'.
#
qnxtmono|Monochrome QNX4 terminal or console,
colors@, pairs@,
scp@, use=qnx4,
# From: Federico Bianchi , 1 Jul 1998
# (esr: commented out and to avoid warnings.)
# (TD: derive from original qnx4 entry)
qnxt2|qnx 2.15 serial terminal,
am,
civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
# QNX ANSI terminal definition
qansi-g|QNX ANSI,
am, eslok, hs, xon,
colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
smul=\E[4m, tbc=\E[3g,
tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
#
qansi|QNX ansi with console writes,
daisy, xhpa, use=qansi-g,
#
qansi-t|QNX ansi without console writes,
crxm, use=qansi,
#
qansi-m|QNX ansi with mouse,
maddr#1,
chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
smicm=\E[>2h, use=qansi,
#
qansi-w|QNX ansi for windows,
xvpa, use=qansi-m,
#### SCO consoles
# SCO console and SOS-Syscons console for 386bsd
# (scoansi: had unknown capabilities
# :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
# :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
# :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
# :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
# :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
# I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
# on the =\E[12m -- esr)
#
# klone+sgr-dumb is an error since the acsc does not match -TD
#
# In this description based on SCO's keyboard(HW) manpage list of default
# function key values:
# F13-F24 are shifted F1-F12
# F25-F36 are control F1-F12
# F37-F48 are shift+control F1-F12
#
# hpa/vpa work in the console, but not in scoterm:
# hpa=\E[%p1%dG,
# vpa=\E[%p1%dd,
#
# SCO's terminfo uses
# kLFT=\E[d,
# kRIT=\E[c,
# which do not work (console or scoterm).
#
# Console documents only 3 attributes can be set with SGR (so we don't use sgr).
scoansi-old|SCO Extended ANSI standard crt (5.0.5),
OTbs, am, bce, eo, xon,
colors#8, cols#80, it#8, lines#25, pairs#64,
acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
scoansi-new|SCO Extended ANSI standard crt (5.0.6),
km,
civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%e;10%;m,
smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
use=scoansi-old,
# make this easy to change...
scoansi|SCO Extended ANSI standard crt,
use=scoansi-old,
#### SGI consoles
# Sent by Stefan Stapelberg , 24 Feb 1997, this is
# from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
# for the application keypad mode. We have added iris-ansi-ap rather than
# change the original to keypad mode.
#
# (iris-ansi: added rmam/smam based on init string -- esr)
#
# This entry, and those derived from it, is used in xwsh (also known as
# winterm). Some capabilities that do not fit into the terminfo model
# include the shift- and control-functionkeys:
#
# F1-F12 generate different codes when shift or control modifiers are used.
# For example:
# F1 \E[001q
# shift F1 \E[013q
# control-F1 \E[025q
#
# In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
# \EOP to \EOS. The shifted and control modifiers still do the same thing.
#
# The cursor keys also have different codes:
# control-up \E[162q
# control-down \E[165q
# control-left \E[159q
# control-right \E[168q
#
# shift-up \E[161q
# shift-down \E[164q
# shift-left \E[158q
# shift-right \E[167q
#
# control-tab \[072q
#
iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
am,
cols#80, it#8, lines#40,
bel=^G, bold=\E[1m, clear=\E[H\E[2J,
cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
tbc=\E[3g,
iris-ansi-ap|IRIS ANSI in application-keypad mode,
is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
# From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
# (T.Dickey 98/1/24)
iris-color|xwsh|IRIX ANSI with color,
ncv#33,
csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
rmul=\E[24m, rs1=\Ec,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sitm=\E[3m, use=vt100+enq, use=klone+color,
use=iris-ansi-ap,
#### OpenBSD consoles
#
# From: Alexei Malinin ; October, 2011.
#
# The following terminal descriptions for the AMD/Intel PC console
# were prepared based on information contained in the OpenBSD-4.9
# termtypes.master and wscons(4) & vga(4) manuals (2010, November).
#
# Added bce based on testing with tack -TD
# Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
# Changed kbs to DEL and removed keys that duplicate stty settings -TD
#
pccon+keys|OpenBSD PC keyboard keys,
kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kend=\E[8~, kent=^M, kf1=\E[11~, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
krfr=^R,
pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y#z#{*|!}#~o,
sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
enacs=\E)0$<5>, rmacs=\E(B$<5>,
sgr=\E[0%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<5>,
sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
pccon+colors|ANSI colors for OpenBSD PC console,
bce,
colors#8, pairs#64,
op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
pccon+base|base capabilities for OpenBSD PC console,
am, km, mc5i, msgr, npc, nxon, xenl, xon,
cols#80, it#8, lines#24,
bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
rmso=\E[m, rs2=\Ec$<50>, smam=\E[?7h, smso=\E[7m,
tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
use=pccon+base, use=pccon+sgr+acs0, use=pccon+keys,
pccon0|OpenBSD PC console with simple ASCII pseudographics,
use=pccon0-m, use=pccon+colors,
pccon-m|OpenBSD PC console without colors,
use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
pccon|OpenBSD PC console,
use=pccon-m, use=pccon+colors,
#### NetBSD consoles
#
# pcvt termcap database entries (corresponding to release 3.31)
# Author's last edit-date: [Fri Sep 15 20:29:10 1995]
#
# (For the terminfo master file, I translated these into terminfo syntax.
# Then I dropped all the pseudo-HP entries. we don't want and can't use
# the :Xs: flag. Then I split :is: into a size-independent and a
# size-dependent . Finally, I added / -- esr)
# NOTE: has been taken out of this entry. for reference, it should
# be . For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
# (esr: added and to resolve NetBSD Problem Report #4583)
pcvtXX|pcvt vt200 emulator (DEC VT220),
am, km, mir, msgr, xenl,
it#8, vt#3,
acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
# 50 lines entries; 80 columns
pcvt25|dec vt220 emulation with 25 lines,
cols#80, lines#25,
is2=\E[1;25r\E[25;1H, use=pcvtXX,
pcvt28|dec vt220 emulation with 28 lines,
cols#80, lines#28,
is2=\E[1;28r\E[28;1H, use=pcvtXX,
pcvt35|dec vt220 emulation with 35 lines,
cols#80, lines#35,
is2=\E[1;35r\E[35;1H, use=pcvtXX,
pcvt40|dec vt220 emulation with 40 lines,
cols#80, lines#40,
is2=\E[1;40r\E[40;1H, use=pcvtXX,
pcvt43|dec vt220 emulation with 43 lines,
cols#80, lines#43,
is2=\E[1;43r\E[43;1H, use=pcvtXX,
pcvt50|dec vt220 emulation with 50 lines,
cols#80, lines#50,
is2=\E[1;50r\E[50;1H, use=pcvtXX,
# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
# 50 lines entries; 132 columns
pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
cols#132, lines#25,
is2=\E[1;25r\E[25;1H, use=pcvtXX,
pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
cols#132, lines#28,
is2=\E[1;28r\E[28;1H, use=pcvtXX,
pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
cols#132, lines#35,
is2=\E[1;35r\E[35;1H, use=pcvtXX,
pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
cols#132, lines#40,
is2=\E[1;40r\E[40;1H, use=pcvtXX,
pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
cols#132, lines#43,
is2=\E[1;43r\E[43;1H, use=pcvtXX,
pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
cols#132, lines#50,
is2=\E[1;50r\E[50;1H, use=pcvtXX,
# OpenBSD implements a color variation
pcvt25-color|dec vt220 emulation with 25 lines and color,
cols#80, lines#25,
is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
use=ecma+color,
# Terminfo entries to enable the use of the ncurses library in colour on a
# NetBSD-arm32 console (only tested on a RiscPC).
# Created by Dave Millen 22.07.98
# modified codes for setf/setb to setaf/setab, then to klone+color, corrected
# typo in invis - TD
arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
am, bce, msgr, xenl, xon,
cols#80, it#8, lines#30,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
use=klone+color,
arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
cols#132, lines#50, use=arm100,
# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
# manufactured by Sharp for the Japenese market.
# From Minoura Makoto , 12 May 1996
x68k|x68k-ite|NetBSD/x68k ITE,
cols#96, lines#32,
kclr=\E[9~, khlp=\E[28~, use=vt220,
# :
# Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
#
# (still unfinished, but good enough so far.)
ofcons|DNARD OpenFirmware console,
bw,
cols#80, lines#30,
bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=^M,
cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
rmso=\2330m, rmul=\2330m,
sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8%;%?%p1%p3%|%t;7%;m,
sgr0=\2330m, smso=\2337m, smul=\2334m,
# NetBSD "wscons" emulator in vt220 mode.
# This entry is based on the NetBSD termcap entry, correcting the ncv value.
# The emulator renders underlined text in red. Colors are otherwise usable.
#
# Testing the emulator and reading the source code (NetBSD 2.0), it appears
# that "vt220" is inaccurate. There are a few vt220-features, but most of the
# vt220 screens in vttest do not work with this emulator. For instance, it
# identifies itself (primary DA response) as a vt220 with selective erase. But
# the selective erase feature does not work. The secondary response is copied
# from Kermit's emulation of vt220, does not correspond to actual vt220. At
# the level of detail in a termcap, it is a passable emulator, since ECH does
# work. Don't use it on a VMS system -TD
wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
bce, msgr,
colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H,
kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
km, use=wsvt25,
# `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
# DECstation/pmax.
rcons|BSD rasterconsole,
use=sun-il,
# Color version of above. Color currently only provided by NetBSD.
rcons-color|BSD rasterconsole with ANSI color,
bce,
colors#8, pairs#64,
op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
# mgterm -- MGL/MGL2, MobileGear Graphic Library
# for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
# -- the setf/setb are probably incorrect, more likely setaf/setab -TD
# -- compare with cons25w
mgterm,
OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
colors#8, cols#80, it#8, lines#18, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
#### FreeBSD console entries
#
# From: Andrey Chernov 29 Mar 1996
# Andrey Chernov maintains the FreeBSD termcap distributions.
#
# Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
# or comment out the :cb: capability in the console entry.
#
# Alexander Lukyanov reports:
# I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
# Now el1 clears not only to the line beginning, but also a large chunk
# of previous line. But there is another bug - ech does not work at all.
#
# for syscons
# common entry without semigraphics
# Bug: The capability resets attributes.
# Bug? The ech and el1 attributes appear to move the cursor in some cases; for
# instance el1 does if the cursor is moved to the right margin first. Removed
# by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
#
# Setting colors turns off reverse; we cannot guarantee order, so use ncv.
# Note that this disables standout with color.
#
# The emulator sends difference strings based on shift- and control-keys,
# like scoansi:
# F13-F24 are shifted F1-F12
# F25-F36 are control F1-F12
# F37-F48 are shift+control F1-F12
cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
am, bce, bw, eo, msgr, npc,
colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
use=cons25w,
cons25-debian|freebsd console with debian backspace (25-line ansi mode),
kbs=\177, kdch1=\E[3~, use=cons25,
cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
colors@, pairs@,
bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
smul=\E[4m, use=cons25,
cons30|ansi80x30|freebsd console (30-line ansi mode),
lines#30, use=cons25,
cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
lines#30, use=cons25-m,
cons43|ansi80x43|freebsd console (43-line ansi mode),
lines#43, use=cons25,
cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
lines#43, use=cons25-m,
cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
lines#50, use=cons25,
cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
lines#50, use=cons25-m,
cons60|ansi80x60|freebsd console (60-line ansi mode),
lines#60, use=cons25,
cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
lines#60, use=cons25-m,
cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225,
use=cons25w,
cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
colors@, pairs@,
op@, rmul=\E[m, setab@, setaf@,
sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
smul=\E[4m, use=cons25r,
cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
lines#50, use=cons25r,
cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
lines#50, use=cons25r-m,
cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
lines#60, use=cons25r,
cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
lines#60, use=cons25r-m,
# ISO 8859-1 FreeBSD console
cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237,
use=cons25w,
cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
colors@, pairs@,
bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
smul=\E[4m, use=cons25l1,
cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
lines#50, use=cons25l1,
cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
lines#50, use=cons25l1-m,
cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
lines#60, use=cons25l1,
cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
lines#60, use=cons25l1-m,
#### 386BSD and BSD/OS Consoles
#
# This was the original 386BSD console entry (I think).
# Some places it's named oldpc3|oldibmpc3.
# From: Alex R.N. Wetmore
origpc3|origibmpc3|IBM PC 386BSD Console,
OTbs, am, bw, eo, xon,
cols#80, lines#25,
acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
# description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
OTbs, km,
lines#25,
bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
# Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
# Note, the emulator supports many of the additional console features
# listed in the iBCS2 (e.g. character-set selection) though not all
# are described here. This entry really ought to be upgraded.
# Also note, the console will also work with fewer lines after doing
# "stty rows NN", e.g. to use 24 lines.
# (Color support from Kevin Rosenberg , 2 May 1996)
# Bug: The capability resets attributes.
bsdos-pc|IBM PC BSD/OS Console,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
use=bsdos-pc-nobold,
bsdos-pc-nobold|BSD/OS PC console w/o bold,
use=klone+color, use=bsdos-pc-m,
bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
OTbs, am, eo, km, xon,
cols#80, it#8, lines#25,
bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
use=klone+sgr8,
# Old names for BSD/OS PC console used in releases before 4.1.
pc3|BSD/OS on the PC Console,
use=bsdos-pc-nobold,
ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
use=bsdos-pc,
# BSD/OS on the SPARC
bsdos-sparc|Sun SPARC BSD/OS Console,
use=sun,
# BSD/OS on the PowerPC
bsdos-ppc|PowerPC BSD/OS Console,
use=bsdos-pc,
#### DEC VT52
# (// capabilities aren't in DEC's official entry -- esr)
#
# Actually (TD pointed this out at the time the acsc string was added):
# vt52 shouldn't define full acsc since most of the cells don't match.
# see vt100 manual page A-31. This is the list that does match:
# f degree
# g plus/minus
# h right-arrow
# k down-arrow
# m scan-1
# o scan-3
# q scan-5
# s scan-7
# The line-drawing happens to work in several terminal emulators, but should
# not be used as a guide to the capabilities of the vt52. Note in particular
# that vt52 does not support line-drawing characters (the scan-X values refer
# to a crude plotting feature) -TD
vt52|dec vt52,
OTbs,
cols#80, it#8, lines#24,
acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=^M,
cub1=\ED, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
#### DEC VT100 and compatibles
#
# DEC terminals from the vt100 forward are collected here. Older DEC terminals
# and micro consoles can be found in the `obsolete' section. More details on
# the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
# found near the end of this file.
#
# Except where noted, these entries are DEC's official terminfos.
# Contact Bill Hedberg of Terminal Support
# Engineering for more information. Updated terminfos and termcaps
# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
#
# In October 1995 DEC sold its terminals business, including the VT and Dorio
# line and trademark, to SunRiver Data Systems. SunRiver has since changed
# its name to Boundless Technologies; see http://www.boundless.com.
#
# NOTE: Any VT100 emulation, whether in hardware or software, almost
# certainly includes what DEC called the `Level 1 editing extension' codes;
# only the very oldest VT100s lacked these and there probably aren't any of
# those left alive. To capture these, use one of the VT102 entries.
#
# Note that the glitch in vt100 is not quite the same as on the Concept,
# since the cursor is left in a different position while in the
# weird state (concept at beginning of next line, vt100 at end
# of this line) so all versions of vi before 3.7 don't handle
# right on vt100. The correct way to handle is when
# you output the char in column 80, immediately output CR LF
# and then assume you are in column 1 of the next line. If
# is on, am should be on too.
#
# I assume you have smooth scroll off or are at a slow enough baud
# rate that it doesn't matter (1200? or less). Also this assumes
# that you set auto-nl to "on", if you set it off use vt100-nam
# below.
#
# The padding requirements listed here are guesses. It is strongly
# recommended that xon/xoff be enabled, as this is assumed here.
#
# The vt100 uses and rather than // because the
# tab settings are in non-volatile memory and don't need to be
# reset upon login. Also setting the number of columns glitches
# the screen annoyingly. You can type "reset" to get them set.
#
# The VT100 series terminals have cursor ("arrows") keys which can operate
# in two different modes: Cursor Mode and Application Mode. Cursor Mode
# is the reset state, and is assumed to be the normal state. Application
# Mode is the "set" state. In Cursor Mode, the cursor keys transmit
# "Esc [ {code}" sequences, conforming to ANSI standards. In Application
# Mode, the cursor keys transmit "Esc O " sequences. Application Mode
# was provided primarily as an aid to the porting of VT52 applications. It is
# assumed that the cursor keys are normally in Cursor Mode, and expected that
# applications such as vi will always transmit the string. Therefore,
# the definitions for the cursor keys are made to match what the terminal
# transmits after the string is transmitted. If the string
# is a null string or is not defined, then cursor keys are assumed to be in
# "Cursor Mode", and the cursor keys definitions should match that assumption,
# else the application may fail. It is also expected that applications will
# always transmit the string to the terminal before they exit.
#
# The VT100 series terminals have an auxiliary keypad, commonly referred to as
# the "Numeric Keypad", because it is a cluster of numeric and function keys.
# The Numeric Keypad which can operate in two different modes: Numeric Mode and
# Application Mode. Numeric Mode is the reset state, and is assumed to be
# the normal state. Application Mode is the "set" state. In Numeric Mode,
# the numeric and punctuation keys transmit ASCII 7-bit characters, and the
# Enter key transmits the same as the Return key (Note: the Return key
# can be configured to send either LF (\015) or CR LF). In Application Mode,
# all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
# always send the same "Esc O {code}" sequences. It is assumed that the keypad
# is normally in Numeric Mode. If an application requires that the keypad be
# in Application Mode then it is expected that the user, or the application,
# will set the TERM environment variable to point to a terminfo entry which has
# defined the string to include the codes that switch the keypad into
# Application Mode, and the terminfo entry will also define function key
# fields to match the Application Mode control codes. If the string
# is a null string or is not defined, then the keypad is assumed to be in
# Numeric Mode. If the string switches the keypad into Application
# Mode, it is expected that the string will contain the control codes
# necessary to reset the keypad to "Normal" mode, and it is also expected that
# applications which transmit the string will also always transmit the
# string to the terminal before they exit.
#
# Here's a diagram of the VT100 keypad keys with their bindings.
# The top line is the name of the key (some DEC keyboards have the keys
# labelled somewhat differently, like GOLD instead of PF1, but this is
# the most "official" name). The second line is the escape sequence it
# generates in Application Keypad mode (where "$" means the ESC
# character). The third line contains two items, first the mapping of
# the key in terminfo, and then in termcap.
# _______________________________________
# | PF1 | PF2 | PF3 | PF4 |
# | $OP | $OQ | $OR | $OS |
# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
# | 7 8 9 - |
# | $Ow | $Ox | $Oy | $Om |
# |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
# | 4 | 5 | 6 | , |
# | $Ot | $Ou | $Ov | $Ol |
# |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
# | 1 | 2 | 3 | |
# | $Oq | $Or | $Os | enter |
# |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
# | 0 | . | |
# | $Op | $On | |
# |___kc1_______K4____|_kc3__K5_|_kent_@8_|
#
# Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
# terminfo guidelines. That is a compromise used to assign the remaining
# keys on the keypad to kf5-kf0, used on older systems with legacy termcap
# support:
vt100+keypad|dec vt100 numeric keypad no fkeys,
ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
vt100+pfkeys|dec vt100 numeric keypad,
kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
use=vt100+keypad,
vt100+fnkeys|dec vt100 numeric keypad,
kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
kf9=\EOw, use=vt100+pfkeys,
#
# A better adaptation to modern keyboards such as the PC's, which have a dozen
# function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
# use the 5-key arrangement to model the arrow keys as suggested in the
# terminfo guidelines:
# _______________________________________
# | PF1 | PF2 | PF3 | PF4 |
# | $OP | $OQ | $OR | $OS |
# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
# | 7 8 9 - |
# | $Ow | $Ox | $Oy | $Om |
# |_ka1__K1_|_________|_ka3__K3_|_________|
# | 4 | 5 | 6 | , |
# | $Ot | $Ou | $Ov | $Ol |
# |_________|_kb2__K2_|_________|_________|
# | 1 | 2 | 3 | |
# | $Oq | $Or | $Os | enter |
# |_kc1__K4_|_________|_kc3__K5_| $OM |
# | 0 | . | |
# | $Op | $On | |
# |___________________|_________|_kent_@8_|
#
vt220+keypad|dec vt220 numeric keypad,
ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
kb3=\EOv, kc2=\EOr,
#
vt100+enq|ncurses extension for vt100-style ENQ,
u8=\E[?1;2c, use=ansi+enq,
vt102+enq|ncurses extension for vt102-style ENQ,
u8=\E[?6c, use=ansi+enq,
#
# And here, for those of you with orphaned VT100s lacking documentation, is
# a description of the soft switches invoked when you do `Set Up'.
#
# Scroll 0-Jump Shifted 3 0-#
# | 1-Smooth | 1-British pound sign
# | Autorepeat 0-Off | Wrap Around 0-Off
# | | 1-On | | 1-On
# | | Screen 0-Dark Bkg | | New Line 0-Off
# | | | 1-Light Bkg | | | 1-On
# | | | Cursor 0-Underline | | | Interlace 0-Off
# | | | | 1-Block | | | | 1-On
# | | | | | | | |
# 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
# | | | | | | | |
# | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
# | | | 1-On | | | 1-50 Hz
# | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
# | | 1-ANSI | | 1-8 Bits
# | Keyclick 0-Off | Parity 0-Off
# | 1-On | 1-On
# Margin Bell 0-Off Parity Sense 0-Odd
# 1-On 1-Even
#
# The following SET-UP modes are assumed for normal operation:
# ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
# WRAP_AROUND_ON JUMP_SCROLL_OFF
# Other SET-UP modes may be set for operator convenience or communication
# requirements; I recommend
# AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
# Unless you have a graphics add-on such as Digital Engineering's VT640
# (and even then, whenever it can be arranged!) you should set
# INTERLACE_OFF
#
# (vt100: I added / based on the init string, also . -- esr)
vt100|vt100-am|dec vt100 (w/advanced video),
OTbs, am, mc5i, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
use=vt100+fnkeys,
vt100nam|vt100-nam|vt100 no automargins,
am@, xenl@, use=vt100-am,
vt100-vb|dec vt100 (w/advanced video) & no beep,
bel@, flash=\E[?5h\E[?5l, use=vt100,
# Ordinary vt100 in 132 column ("wide") mode.
vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
cols#132, lines#24,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
cols#132, lines#14, vt@,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
# vt100 with no advanced video.
vt100-nav|vt100 without advanced video option,
xmc#1,
blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
smul@, use=vt100,
vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
cols#132, lines#14, use=vt100-nav,
# vt100 with one of the 24 lines used as a status line.
# We put the status line on the top.
vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
eslok, hs,
lines#23,
clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
# Status line at bottom.
# Clearing the screen will clobber status line.
vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
eslok, hs,
lines#23,
dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
# Most of the `vt100' emulators out there actually emulate a vt102
# This entry (or vt102-nsgr) is probably the right thing to use for
# these.
vt102|dec vt102,
dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
use=vt100,
vt102-w|dec vt102 in wide mode,
cols#132,
rs3=\E[?3h, use=vt102,
# Many brain-dead PC comm programs that pretend to be `vt100-compatible'
# fail to interpret the ^O and ^N escapes properly. Symptom: the
# string in the canonical vt100 entry above leaves the screen littered
# with little snowflake or star characters (IBM PC ROM character \017 = ^O)
# after highlight turnoffs. This entry should fix that, and even leave
# ACS support working, at the cost of making multiple-highlight changes
# slightly more expensive.
# From: Eric S. Raymond July 22 1995
vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
sgr@, sgr0=\E[m, use=vt102,
# VT125 Graphics CRT. Clear screen also erases graphics
# Some vt125's came configured with vt102 support.
vt125|vt125 graphics terminal,
mir,
clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
# This isn't a DEC entry, it came from University of Wisconsin.
# (vt131: I added / based on the init string, also -- esr)
vt131|dec vt131,
OTbs, am, xenl,
cols#80, it#8, lines#24, vt#3,
bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
rmul=\E[m$<2/>,
rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[7m$<2/>, smul=\E[4m$<2/>,
# vt132 - like vt100 but slower and has ins/del line and such.
# I'm told that / are backwards in the terminal from the
# manual and from the ANSI standard, this describes the actual
# terminal. I've never actually used a vt132 myself, so this
# is untested.
#
vt132|DEC vt132,
xenl,
dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
# This vt220 description maps F5--F9 to the second block of function keys
# at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
# with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
# PF1--PF4 are used as F1--F4.
#
# added msgr -TD
vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
OTbs, OTpt, am, mir, msgr, xenl, xon,
cols#80, lines#24, vt#3,
OTnl=^J,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
rmso=\E[27m, rmul=\E[24m,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
smso=\E[7m, smul=\E[4m,
# A much better description of the VT200/220; used to be vt220-8
# changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
# designation to accommodate bug in pcvt -TD
#
# Here's a picture of the VT220 editing keypad:
# +--------+--------+--------+
# | Find | Insert | Remove |
# +--------+--------+--------+
# | Select | Prev | Next |
# +--------+--------+--------+
vt220|vt200|dec vt220,
OTbs, am, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
il=\E[%p1%dL, il1=\E[L, ind=\ED,
is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>,
rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
rs1=\E[?3l, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
use=ansi+enq,
vt220-w|vt200-w|DEC vt220 in wide mode,
cols#132,
rs3=\E[?3h, use=vt220,
vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
OTbs, am, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
ich=\233%p1%d@, if=/usr/share/tabset/vt100,
il=\233%p1%dL, il1=\233L, ind=\ED,
is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
rmul=\23324m, rs1=\233?3l, sc=\E7,
sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
smso=\2337m, smul=\2334m, tbc=\2333g,
# vt220d:
# This vt220 description regards F6--F10 as the second block of function keys
# at the top of the keyboard. This mapping follows the description given
# in the VT220 Programmer Reference Manual and agrees with the labeling
# on some terminals that emulate the vt220. There is no support for an F5.
# See vt220 for an alternate mapping.
#
vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
am@,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
# vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
# (not an official DEC entry!)
# The problem with real vt220 terminals is they don't send escapes when in
# in vt220 mode. This can be gotten around two ways. 1> don't send
# escapes or 2> put the vt220 into vt100 mode and use all the nifty
# features of vt100 advanced video which it then has.
#
# This entry takes the view of putting a vt220 into vt100 mode so
# you can use the escape key in emacs and everything else which needs it.
#
# You probably don't want to use this on a VMS machine since VMS will think
# it has a vt220 and will get fouled up coming out of emacs
#
# From: Alexander Latzko , 30 Dec 1996
# (Added vt100 , to quiet a tic warning -- esr)
# added msgr -TD
vt200-js|vt220-js|dec vt200 series with jump scroll,
am, msgr,
cols#80,
bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
ht=^I, il1=\E[L, ind=\ED,
is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
# This was DEC's vt320. Use the purpose-built one below instead
#vt320|DEC VT320 in vt100 emulation mode,
# use=vt220,
# Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
#
vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
am@,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
# These entries are not DEC's official ones, they were purpose-built for the
# VT320. Here are the designer's notes:
# is end on a PC kbd. Actually 'select' on a VT. Mapped to
# 'Erase to End of Field'... since nothing seems to use 'end' anyways...
# khome is Home on a PC kbd. Actually 'FIND' on a VT.
# Things that use usually use tab anyways... and things that don't use
# tab usually use instead...
# kprv is same as tab - Backtab is useless...
# I left out because of its RIDICULOUS complexity,
# and the resulting fact that it causes the termcap translation of the entry
# to SMASH the 1k-barrier...
# From: Adam Thompson Sept 10 1995
# (vt320: uncommented --esr)
vt320|vt300|dec vt320 7 bit terminal,
am, hs, mir, msgr, xenl,
cols#80, lines#24, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
rmul=\E[m,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq,
vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
am@,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
use=vt320,
# We have to init 132-col mode, not 80-col mode.
vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
cols#132, wsl#132,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
use=vt320,
vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
am@,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
use=vt320-w,
# VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
# which are pretty much a superset of the VT320. They have the
# host writable status line, yet another different DRCS matrix size,
# and such, but they add the DEC Technical character set, Multiple text
# pages, selectable length pages, and the like. The difference between
# the vt330 and vt340 is that the latter has only 2 planes and a monochrome
# monitor, the former has 4 planes and a color monitor. These terminals
# support VT131 and ANSI block mode, but as with much of these things,
# termcap/terminfo doesn't deal with these features.
#
# Note that this entry is are set up in what was the standard way for GNU
# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
# keys were switched into application mode at the same time the numeric pad
# is switched into application mode. This changes the definitions of the
# arrow keys. Emacs v19 is smarter and mines its keys directly out of
# your termcap or terminfo entry,
#
# From: Daniel Glasser , 13 Oct 1993
# (vt340: string capability "sb=\E[M" corrected to "sr";
# also, added / based on the init string -- esr)
vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
am, eslok, hs, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
il1=\E[L, ind=\ED,
is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
rmul=\E[24m, rs1=\E[?3l, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
tsl=\E[2$~\E[1$}\E[1;%dH,
# DEC doesn't supply a vt400 description, so we add Daniel Glasser's
# (originally written with vt420 as its primary name, and usable for it).
#
# VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
# text pages and long text pages with selectable length of the vt340, along
# with left and right margins, rectangular area text copy, fill, and erase
# operations, selected region character attribute change operations,
# page memory and rectangle checksums, insert/delete column, reception
# macros, and other features too numerous to remember right now. TERMCAP
# can only take advantage of a few of these added features.
#
# Note that this entry is are set up in what was the standard way for GNU
# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
# keys were switched into application mode at the same time the numeric pad
# is switched into application mode. This changes the definitions of the
# arrow keys. Emacs v19 is smarter and mines its keys directly out of
# your termcap entry,
#
# From: Daniel Glasser , 13 Oct 1993
# (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
# also, added / based on the init string -- esr)
vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
am, eslok, hs, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=\ED,
is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl,
# (vt420: I removed , it collided with . I also restored
# a missing -- esr)
# add msgr and other capabilities from vt220 -TD
vt420|DEC VT420,
am, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~,
kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE,
rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
use=ansi+pp, use=dec+sl, use=ansi+enq,
# DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
# takes two parameters, the key and the string. Translating the key is
# straightforward (keys 1-5 are not defined on real terminals, though some
# emulators define these):
#
# if (key < 16) then value = key;
# else if (key < 21) then value = key + 1;
# else if (key < 25) then value = key + 2;
# else if (key < 27) then value = key + 3;
# else if (key < 30) then value = key + 4;
# else value = key + 5;
#
# The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
# There's no provision in terminfo for emitting a string in this format, so the
# application has to know it.
#
vt420pc|DEC VT420 w/PC keyboard,
kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, khome=\E[H,
pctrm=USR_TERM\:vt420pcdos\:,
pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
use=vt420,
vt420pcdos|DEC VT420 w/PC for DOS Merge,
lines#25,
dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;,
pctrm@,
rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
use=vt420,
vt510|DEC VT510,
use=vt420,
vt510pc|DEC VT510 w/PC keyboard,
use=vt420pc,
vt510pcdos|DEC VT510 w/PC for DOS Merge,
use=vt420pcdos,
# VT520/VT525
#
# The VT520 is a monochrome text terminal capable of managing up to
# four independent sessions in the terminal. It has multiple ANSI
# emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
# and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
# 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
#
# Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
# [Alt]/[Print Screen] depending upon which keyboard and which
# terminal mode is being used. If Set-Up has been disabled or
# assigned to an unknown key, Set-Up may be entered by pressing
# [F3] as the first key after power up, regardless of keyboard type.
vt520|DEC VT520,
use=ansi+rca, use=vt420, use=ansi+tabs,
vt525|DEC VT525,
use=vt520,
#### VT100 emulations
#
# John Hawkinson tells us that the EWAN telnet for Windows
# (the best Windows telnet as of September 1995) presents the name `dec-vt100'
# to telnetd. Michael Deutschmann informs us
# that this works best with a stock vt100 entry.
dec-vt100|EWAN telnet's vt100 emulation,
use=vt100,
# From: Adrian Garside <[email protected]>, 19 Nov 1996
dec-vt220|DOS tnvt200 terminal emulator,
am@, use=vt220,
# Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
# anyone who needs PC VT340 emulation. (or anything below that level, for
# that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
# RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
# I can send the address if requested.
# (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
# From: Adam Thompson Sept 10 1995
z340|zstem vt340 terminal emulator 132col 42line,
lines#42,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
use=vt320-w,
z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
am@,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
use=z340,
# CRT is shareware. It implements some xterm features, including mouse.
crt|crt-vt220|CRT 2.3 emulating VT220,
bce, msgr,
ncv@,
hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
# PuTTY 0.55 (released 3 August 2004)
# http://www.chiark.greenend.org.uk/~sgtatham/putty/
#
# Comparing with 0.51, vttest is much better (only a few problems with the
# cursor position reports and wrapping).
#
# PuTTY 0.51 (released 14 December 2000)
#
# This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
# well as SCO and Atari, color palettes from Linux console). Reading the code,
# it is intended to be VT102 plus selected features. By default, it sets $TERM
# to xterm, which is incorrect, since several features are misimplemented:
#
# Alt+key always sends ESC+key, so 'km' capability is removed.
#
# Control responses, wrapping and tabs are buggy, failing a couple of
# screens in vttest.
#
# xterm mouse support is not implemented (unrelease version may).
#
# Several features such as backspace/delete are optional; this entry documents
# the default behavior -TD
putty|PuTTY terminal emulator,
am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
colors#8, it#8, ncv#22, pairs#64, U8#1,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
dch=\E[%p1%dP, dch1=\E[P,
dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;,
dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H,
hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
ind=^J, indn=\E[%p1%dS,
initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~,
kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m,
rmso=\E[27m, rmul=\E[24m,
rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3;J, use=vt102+enq,
use=xterm+sl,
vt100-putty|Reset PuTTY to pure vt100,
rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
use=vt100,
# palette is hardcoded...
putty-256color|PuTTY 0.58 with xterm 256-colors,
initc@, use=xterm+256color, use=putty,
# One of the keyboard selections is "VT100+".
# pterm (the X11 port) uses shifted F1-F10 as F11-F20
putty-vt100|VT100+ keyboard layout,
kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
kf9=\EOX, use=putty,
# Unlike xterm-sco, this leaves kmous ambiguous with kf1.
#
# Use modifiers to obtain function keys past 12:
# F1-F12 - normal
# F13-F24 - shift
# F25-F36 - control/alt
# F37-F48 - control/shift
#
putty-sco|putty with SCO function keys,
kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
kich1=\E[L, knp=\E[G, kpp=\E[I, use=putty,
# This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
# T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
# (communication program) which supports:
#
# - Serial port connections.
# - TCP/IP (telnet) connections.
# - VT100 emulation, and selected VT200/300 emulation.
# - TEK4010 emulation.
# - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
# Quick-VAN).
# - Scripts using the "Tera Term Language".
# - Japanese and Russian character sets.
#
# The program does not come with terminfo or termcap entries. However, the
# emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
# vt52 or doublesize character support; blinking is done with color). Besides
# the HPA, VPA extensions it also implements CPL and CNL.
#
# All of the function keys can be remapped. This description shows the default
# mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
# are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
# is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
# kfnd Insert
# kslt Delete
# kich1 Home
# kdch1 PageUp
# kpp End
# knp PageDown
#
# ANSI colors are implemented, but cannot be combined with video attributes
# except for reverse.
#
# No fonts are supplied with the program, so the acsc string is chosen to
# correspond with the default Microsoft terminal font.
#
# Tera Term recognizes some xterm sequences, including those for setting and
# retrieving the window title, and for setting the window size (i.e., using
# "resize -s"), though it does not pass SIGWINCH to the application if the
# user resizes the window with the mouse.
teraterm2.3|Tera Term Pro,
km, xon@,
ncv#43, vt@,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
use=klone+color, use=vt100,
# Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
# to choose a Windows OEM font).
#
# Testing with tack:
# - it does not have xenl (suppress that)
# - underline seems to work with color (modify ncv).
# Testing with vttest:
# - wrapping differs from vt100 (menu 1).
# - it recognizes xterm's X10 and normal mouse tracking, but none of the
# other flavors.
# - it recognizes the dtterm window controls for reporting size in
# characters and pixels.
# - it passes SIGWINCH.
teraterm4.59|Tera Term Pro,
bce, xenl@,
ncv#41,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
kmous=\E[M, use=teraterm2.3,
teraterm|Tera Term,
use=teraterm4.59,
# Tested with WinNT 4.0, the telnet application assumes the screensize is
# 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
#
# Other notes:
# a) Fails tack's cup (cursor-addressing) test, though cup works well enough
# for casual (occasional) use. Also fails several of the vttest screens,
# but that is not unusual for vt100 "emulators".
# b) Does not implement vt100 keypad
# c) Recognizes a subset of vt52 controls.
ms-vt100|MS telnet imitating dec vt100,
lines#25,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
# Tested with Windows 2000, the telnet application runs in a console window,
# also using 'Terminal' font.
#
# Other notes:
# a) This version has no function keys or numeric keypad. Unlike the older
# version, the numeric keypad is entirely ignored.
# b) The program sets $TERM to "ansi", which of course is inaccurate.
ms-vt100-color|vtnt|windows 2000 ansi (sic),
bce,
dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
use=ms-vt100,
# Based on comments from Federico Bianchi:
#
# vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
# scheme for PF keys.
#
# and PuTTY wishlist:
#
# The modifiers are represented as the codes listed above, prefixed to
# the normal sequences. If the modifier is pressed alone, its sequence
# is transmitted twice in succession. If multiple modifiers apply,
# they're transmitted in the order shift, control, alt.
#
# Shift \E^S
# Alt \E^A,
# Ctrl \E^C,
ms-vt100+|vt100+|windows XP vt100+ (sic),
kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
knp=\E/, kpp=\E?, use=ms-vt100-color,
ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
use=ms-vt100+,
# expect-5.44.1.15/example/tkterm
# a minimal subset of a vt100 (compare with "news-unk).
#
# The missing "=" in smkx is not a typo (here), but an error in tkterm.
tt|tkterm|Don Libes' tk text widget terminal emulator,
clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
smso=\E[7m,
######## X TERMINAL EMULATORS
#### XTERM
#
# You can add the following line to your .Xdefaults to change the terminal type
# set by the xterms you start up to my-xterm:
#
# *termName: my-xterm
#
# System administrators can change the default entry for xterm instances
# by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
# case, xterm will detect and reject an invalid terminal type, falling back
# to the default of xterm.
#
# X10/6.6 11/7/86, minus alternate screen, plus (csr)
# (xterm: ":MT:" changed to ":km:"; added / based on init string;
# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
# as these seem not to work -- esr)
x10term|vs100-x10|xterm terminal emulator (X10 window system),
OTbs, am, km, mir, msgr, xenl, xon,
cols#80, it#8, lines#65,
bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
smso=\E[7m, smul=\E[4m,
# Compatible with the R5 xterm
# (from the XFree86 3.2 distribution, removed)
# added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
# corrected typos in rs2 string - TD
# added u6-u9 -TD
xterm-r5|xterm R5 version,
OTbs, am, km, msgr, xenl,
cols#80, it#8, lines#24,
bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
rmul=\E[m,
rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
sc=\E7,
sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, use=vt100+enq,
# Compatible with the R6 xterm
# (from XFree86 3.2 distribution, and added, removed)
# added khome/kend, hts based on the R6 xterm code - TD
# (khome/kend do not actually work in X11R5 or X11R6, but many people use this
# for compatibility with other emulators).
xterm-r6|xterm X11R6 version,
OTbs, am, km, mir, msgr, xenl,
cols#80, it#8, lines#24,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
il1=\E[L, ind=^J,
is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
use=vt100+enq,
xterm-old|antique xterm version,
use=xterm-r6,
# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
# The name has been changed and some aliases have been removed.
xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
OTbs, am, bce, km, mir, msgr, xenl, XT,
cols#80, it#8, lines#24, ncv@,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
il1=\E[L, ind=^J,
is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
rmso=\E[27m, rmul=\E[24m, rs1=^O,
rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
use=ecma+color, use=vt220+keypad,
# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
# codes for F1-F4 except while in VT220 mode.
xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
# This version was released in XFree86 3.3.3 (November 1998).
# Besides providing printer support, it exploits a new feature that allows
# xterm to use terminfo-based descriptions with the titeInhibit resource.
# -- the distribution contained incorrect khome/kend values -TD
xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
blink=\E[5m, ich1@, invis=\E[8m,
is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
rs2=\E[!p\E[?3;4l\E[4l\E>,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
smcup=\E[?1048h\E[?1047h, use=ansi+pp,
use=xterm-xf86-v33,
# This version was released in XFree86 4.0.
xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
npc,
kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
smcup=\E[?1049h, use=xterm-xf86-v333,
# This version was released in XFree86 4.3.
xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
kbeg@,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
use=xterm-xf86-v40,
# This version was released in XFree86 4.4.
xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
rin=\E[%p1%dT, use=xterm-xf86-v43,
xterm-xfree86|xterm terminal emulator (XFree86),
use=xterm-xf86-v44,
# This version reflects the current xterm features.
xterm-new|modern xterm terminal emulator,
npc,
indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
rin=\E[%p1%dT, use=xterm+pcfkeys, use=xterm+tmux,
use=xterm-basic,
# This fragment is for people who cannot agree on what the backspace key
# should send.
xterm+kbs|fragment for backspace key,
kbs=^H,
#
# This fragment describes as much of XFree86 xterm's "pc-style" function
# keys as will fit into terminfo's 60 function keys.
# From ctlseqs.ms:
# Code Modifiers
# ---------------------------------
# 2 Shift
# 3 Alt
# 4 Shift + Alt
# 5 Control
# 6 Shift + Control
# 7 Alt + Control
# 8 Shift + Alt + Control
# ---------------------------------
# The meta key may also be used as a modifier in this scheme, adding another
# bit to the parameter.
xterm+pcfkeys|fragment for PC-style fkeys,
use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
use=xterm+pce2,
#
xterm+noapp|fragment with cursor keys in normal mode,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
khome=\E[H,
xterm+app|fragment with cursor keys in application mode,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
khome=\EOH,
#
# The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
# and revised in patch #167 (2002/8/24). Some other terminal emulators copied
# the earlier scheme, as noted in the "use=" clauses in this file.
#
# The original assignments from patch #94 for cursor-keys had some technical
# issues:
#
# A parameter for a function-key to represent a modifier is just more
# bits. But for a cursor-key it may change the behavior of the
# application. For instance, emacs decodes the first parameter of a
# cursor-key as a repeat count.
#
# A parameterized string should (really) not begin with SS3 (\EO).
# Rather, CSI (\E[) should be used.
#
# For these reasons, the original assignments were deprecated. For
# compatibility reasons, they are still available as a setting of xterm's
# modifyCursorKeys resource. These fragments list the modified cursor-keys
# that might apply to xterm+pcfkeys with different values of that resource.
xterm+pcc3|fragment with modifyCursorKeys:3,
kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
kUP7=\E[>1;7A,
xterm+pcc2|fragment with modifyCursorKeys:2,
kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
xterm+pcc1|fragment with modifyCursorKeys:1,
kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
xterm+pcc0|fragment with modifyCursorKeys:0,
kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
#
# Here are corresponding fragments from xterm patch #216:
#
xterm+pcf0|fragment with modifyFunctionKeys:0,
kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
#
xterm+pcf2|fragment with modifyFunctionKeys:2,
kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~,
#
# Chunks from xterm #230:
xterm+pce2|fragment with modifyCursorKeys:2,
kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
use=xterm+edit,
xterm+edit|fragment for 6-key editing-keypad,
kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
use=xterm+pc+edit,
xterm+pc+edit|fragment for pc-style editing keypad,
kend=\E[4~, khome=\E[1~,
xterm+vt+edit|fragment for vt220-style editing keypad,
kfnd=\E[1~, kslt=\E[4~,
#
# Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
# Alternatively, the same scheme with old-style function keys as in xterm-r6
# is shown here (because that is used in mrxvt and mlterm):
xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
kf63=\E[13;4~, use=xterm+pcf2,
#
# This chunk is used for building the VT220/Sun/PC keyboard variants.
xterm-basic|modern xterm terminal emulator - common,
OTbs, am, bce, km, mir, msgr, xenl, AX, XT,
colors#8, cols#80, it#8, lines#24, pairs#64,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>,
kmous=\E[M, meml=\El, memu=\Em, op=\E[39;49m, rc=\E8,
rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>,
rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm,
setaf=\E[3%p1%dm,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3;J,
use=ansi+pp, use=xterm+kbs, use=vt100+enq,
# From: David J. MacKenzie , 14 Nov 1997
# In retrospect, something like xterm-r6 was intended here -TD
xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
# 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
# If configured to support 88- or 256-colors (which is fairly common in 2009),
# xterm also recognizes the control sequences for initc -TD
xterm-16color|xterm with 16 colors like aixterm,
ccc,
initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
use=ibm+16color, use=xterm-new,
# 256-colors is a compile-time feature of XFree86 xterm beginning with
# patch #111 (1999/7/10) -TD
xterm+256color|xterm 256-color feature,
ccc,
colors#256, pairs#32767,
initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
setb@, setf@,
# 88-colors is a compile-time feature of XFree86 xterm beginning with
# patch #115 (1999/9/18) -TD
#
# Note that the escape sequences used are the same as for 256-colors - xterm
# has a different table of default color resource values. If built for
# 256-colors, it can still handle an 88-color palette by using the initc
# capability.
#
# At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
# which support the xterm+256color feature support the associated initc
# capability. So it is cancelled in the entries which use this and/or the
# xterm+256color block.
#
# The default color palette for the 256- and 88-colors are different. A
# given executable will have one palette (perhaps compiled-in). If the program
# supports xterm's control sequence, it can be programmed using initc.
xterm+88color|xterm 88-color feature,
colors#88, pairs#7744, use=xterm+256color,
# These variants of XFree86 3.9.16 xterm are built as a configure option.
xterm-256color|xterm with 256 colors,
use=xterm+256color, use=xterm-new,
xterm-88color|xterm with 88 colors,
use=xterm+88color, use=xterm-256color,
# These two are used to demonstrate the any-event mouse support, i.e., by
# using an extended name "XM" which tells ncurses to put the terminal into
# a special mode when initializing the xterm mouse.
xterm-1002|testing xterm-mouse,
XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new,
xterm-1003|testing xterm-mouse,
XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new,
# This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
# asked for some of xterm's advanced features to be added to its terminfo
# entry. It defines extended capabilities not found in standard terminfo or
# termcap. These are useful in tmux, for instance, hence the name.
#
# One caveat in adding extended capabilities in ncurses is that if the names
# are longer than two characters, then they will not be visible through the
# termcap interface.
#
# Ms modifies the selection/clipboard. Its parameters are
# p1 = the storage unit (clipboard, selection or cut buffer)
# p2 = the base64-encoded clipboard content.
#
# Ss is used to set the cursor style as described by the DECSCUSR
# function to a block or underline.
# Se resets the cursor style to the terminal power-on default.
#
# Cs and Cr set and reset the cursor colour.
xterm+tmux|advanced xterm features used in tmux,
Cr=\E]112\007, Cs=\E]12;%p1%s\007,
Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
# This is another variant, for XFree86 4.0 xterm (T.Dickey)
# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
# To use it, your decTerminalID resource must be set to 200 or above.
#
# HTS \E H \210
# RI \E M \215
# SS3 \E O \217
# CSI \E [ \233
#
xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
colors#8, cols#80, it#8, lines#24, pairs#64,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
civis=\233?25l, clear=\233H\2332J,
cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr,
cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J,
cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
flash=\233?5h$<100/>\233?5l, home=\233H,
hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m,
is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
rs1=\Ec,
rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
use=xterm+kbs,
xterm-hp|xterm with hpterm function keys,
kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
knp=\ES, kpp=\ET, use=xterm-basic,
xterm-sco|xterm with SCO function keys,
kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
use=xterm-basic,
# The xterm-new description has all of the features, but is not completely
# compatible with vt220. If you are using a Sun or PC keyboard, set the
# sunKeyboard resource to true:
# + maps the editing keypad
# + interprets control-function-key as a second array of keys, so a
# 12-fkey keyboard can support vt220's 20-fkeys.
# + maps numeric keypad "+" to ",".
# + uses DEC-style control sequences for the application keypad.
#
xterm-vt220|xterm emulating vt220,
kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
use=xterm+app, use=xterm+edit, use=xterm-basic,
use=vt220+keypad,
xterm-vt52|xterm emulating dec vt52,
cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
home=\EH, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
use=xterm+kbs,
xterm-noapp|xterm with cursor keys in normal mode,
rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
use=xterm,
xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
lines#24, use=xterm-old,
# This is xterm for ncurses.
xterm|xterm terminal emulator (X Window System),
use=xterm-new,
# This entry assumes that xterm's handling of VT100 SI/SO is disabled by
# setting the vt100Graphics resource to false.
xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
U8#1, use=xterm,
# These building-blocks allow access to the X titlebar and icon name as a
# status line. There are a few problems in using them in entries:
#
# a) tsl should have a parameter to denote the column on which to transfer to
# the status line.
# b) the "0" code for xterm updates both icon-title and window title. Some
# window managers such as twm (and possibly window managers descended from
# it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
# don't want to mess with icon-name when using those window managers.
#
# The extension "TS" is preferable, because it does not accept a parameter.
# However, if you are using a non-extended terminfo, "TS" is not visible.
xterm+sl|access X title line and icon name,
hs,
dsl=\E]0;\007, fsl=^G, tsl=\E]0;, TS=\E]0;,
xterm+sl-twm|access X title line (pacify twm-descended window managers),
hs,
dsl=\E]2;\007, fsl=^G, tsl=\E]2;, TS=\E]2;,
# In contrast, this block can be used for a DEC vt320 and up. There are two
# controls used.
#
# DECSASD (select active status display)
# \E[0$} Main display
# \E[1$} Status line
#
# DECSSDT (select status line type)
# \E[0$~ No status line
# \E[1$~ Indicator status line
# \E[2$~ Host-writable status line
#
# The building block assumes that the terminal always shows something at the
# status line (either the indicator, or status line). That is because if no
# status line is used, then the terminal makes that line part of the user
# window, changing its size without notice.
#
# Because there is no "esl" (enable status line) capability, the "tsl"
# capability ensures that the status line is host-writable. A DEC terminal
# will clear the status line when changing from indicator to host-writable
# mode.
#
# Once on the status line, the row part of cursor addressing is ignored. Since
# tsl expects a parameter (to specify the column), the shortest addressing that
# can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
#
dec+sl|DEC VTxx status line,
eslok, hs,
dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
#
# The following xterm variants don't depend on your base version
#
# xterm with bold instead of underline
xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|%t;7%;m,
smso=\E[7m, smul=\E[1m, use=xterm-old,
# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
ich@, ich1@, use=xterm,
# From: Mark Sheppard , 4 May 1996
xterm1|xterm terminal emulator ignoring the alternate screen buffer,
rmcup@, smcup@, use=xterm,
#### KTERM
# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
# (kterm should not invoke DEC Graphics as the alternate character set
# -- Kenji Rikitake)
# (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
# -- MATSUMOTO Shoji)
# kterm implements acsc via built-in table of X Drawable's
kterm|kterm kanji terminal emulator (X window system),
eslok, hs, XT,
ncv@,
acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
kterm-color|kterm-co|kterm with ANSI colors,
ncv@, use=kterm, use=ecma+color,
#### Other XTERM
# These (xtermc and xtermm) are distributed with Solaris. They refer to a
# variant of xterm which is apparently no longer supported, but are interesting
# because they illustrate SVr4 curses mouse controls - T.Dickey
xtermm|xterm terminal emulator (monocrome),
OTbs, am, km, mir, msgr, xenl,
btns#3, cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
xtermc|xterm terminal emulator (color),
colors#8, ncv#7, pairs#64,
op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
use=xtermm,
# From: David J. MacKenzie 20 Apr 1995
# Here's a termcap entry I've been using for xterm_color, which comes
# with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
# color stuff, I also have a status line defined as the window manager
# title bar. [I have translated it to terminfo -- ESR]
xterm-pcolor|xterm with color used for highlights and status line,
wsl#40,
bold=\E[1;43m, rev=\E[7;34m,
sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1%t;7;31%;%?%p3%t;7;34%;%?%p4%t;5%;%?%p7%t;8%;m,
smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
# This describes the capabilities of color_xterm, an xterm variant from
# before ECMA-64 color support was folded into the main-line xterm release.
# This entry is straight from color_xterm's maintainer.
# From: Jacob Mandelson , 09 Nov 1996
# The README's with the distribution also say that it supports SGR 21, 24, 25
# and 27, but they are not present in the terminfo or termcap.
color_xterm|cx|cx100|color_xterm color terminal emulator for X,
OTbs, am, km, mir, msgr, xenl, XT,
cols#80, it#8, lines#65, ncv@,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
rmso=\E[27m, rmul=\E[24m,
rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
smul=\E[4m, use=ecma+color, use=vt220+keypad,
# The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
# xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
# SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
# description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
# that each of those implements the home, end, delete keys differently.
#
# Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
# colors; note that this is not compatible with the 5.2 version.
# csw (2002-05-15): make xterm-color primary instead of nxterm, to
# match XFree86's xterm.terminfo usage and prevent circular links
xterm-color|nxterm|generic color xterm,
ncv@,
op=\E[m, use=xterm-r6, use=klone+color,
# This entry describes an xterm with Sun-style function keys enabled
# via the X resource setting "xterm*sunFunctionKeys:true"
# To understand / note that L1,L2 and F11,F12 are the same.
# The ... keys are L3-L10. We don't set
# because we want it to be seen as .
# The ... keys are R1-R15. We treat some of these in accordance
# with their Sun keyboard labels instead.
# From: Simon J. Gerraty 10 Jan 1996
xterm-sun|xterm with sunFunctionKeys true,
kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
use=xterm-basic,
xterms-sun|small (80x24) xterm with sunFunctionKeys true,
cols#80, lines#24, use=xterm-sun,
#### GNOME (VTE)
# this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
gnome-rh62|Gnome terminal,
bce,
kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
use=xterm-color,
# GNOME Terminal 1.4.0.4 (Redhat 7.2)
#
# This implements a subset of vt102 with a random selection of features from
# other terminals such as color and function-keys.
#
# shift-f1 to shift-f10 are f11 to f20
#
# NumLock changes the application keypad to approximate vt100 keypad, except
# that there is no escape sequence matching comma (,).
#
# Other defects observed:
# vt100 LNM mode is not implemented.
# vt100 80/132 column mode is not implemented.
# vt100 DECALN is not implemented.
# vt100 DECSCNM mode is not implemented, so flash does not work.
# vt100 TBC (tab reset) is not implemented.
# xterm alternate screen controls do not restore cursor position properly
# it hangs in tack after running function-keys test.
gnome-rh72|GNOME Terminal,
bce, km@,
civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
# GNOME Terminal 2.0.1 (Redhat 8.0)
#
# Documentation now claims it implements vt220 (which is demonstrably false).
# However, it does implement ECH, which is a vt220 feature. And there are
# workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
# more of its bugs using vttest.
#
# However, note that bce and msgr are broken in this release. Tabs (tbc and
# hts) are broken as well. Sometimes flash (as in xterm-new) works.
#
# kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
# operations. Shift-tab generates a distinct sequence so it can be argued
# that it implements kcbt.
gnome-rh80|GNOME Terminal,
bce@, msgr@,
ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177,
kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
# GNOME Terminal 2.2.1 (Redhat 9.0)
#
# bce and msgr are repaired.
gnome-rh90|GNOME Terminal,
bce, msgr, XT,
hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
use=gnome-rh80,
# GNOME Terminal 2.14.2 (Fedora Core 5)
# Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
gnome-fc5|GNOME Terminal,
rs1=\Ec,
rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
# GNOME Terminal 2.18.1 (2007 snapshot)
#
# For any "recent" version of gnome-terminal, it is futile to attempt to
# support modifiers on cursor- and keypad keys because the program usually
# is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
# of the keys (which more/less correspond to the termcap values), and will
# interpret those according to the $TERM value, but others not in the
# terminfo according to some constantly changing set of hacker guidelines -TD
vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
use=xterm+pcc2, use=gnome-fc5,
gnome-2007|GNOME Terminal snapshot 2.18.1,
use=vte-2007,
# GNOME Terminal 2.22.3 (2008 snapshot)
#
# In vttest, it claims to be a vt220 with national replacement character-sets,
# but aside from the identifier string, implements only a small fraction of
# vt220's behavior, which will make it less usable on a VMS system (unclear
# what the intent of the developer is, since the NRC feature exposed in vttest
# by this change does not work).
vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
use=vte+pcfkeys, use=vte-2007,
gnome-2008|GNOME Terminal snapshot 2.22.3,
use=vte-2008,
# GNOME Terminal 3.6.0 (2012)
# VTE 0.34.1 was marked in git 2012-10-15 (three days after patch was applied
# in ncurses). It inherited from gnome-fc5, which broke the modified forms
# of f1-f4 -TD
#
# Testing with tack shows that flash does not/has not worked -TD
vte-2012|VTE 0.34.1,
flash@, ritm=\E[23m, sitm=\E[3m, use=vte-2008,
# Version 3.6.1 sets TERM to xterm-256color (still hardcoded), which has
# 61 differences from a correct entry for gnome terminal.
gnome-2012|GNOME Terminal 3.6.0,
use=vte-2012,
# GNOME terminal may automatically use the contents of the "xterm" terminfo to
# supply key information which is not built into the program. With 2.22.3,
# this list is built into the program (which addresses the inadvertant use of
# random terminfo data, though using a set of values which does not correspond
# to any that xterm produces - still not solving the problem that GNOME
# terminal hardcodes the $TERM variable as "xterm").
#
# terminfo modifier code keys
# kf13-kf24 shift 2 F1 to F12
# kf25-kf36 control 5 F1 to F12
# kf37-kf48 shift/control 6 F1 to F12
# kf49-kf60 alt 3 F1 to F12
# kf61-kf63 shift-alt 4 F1 to F3
#
# The parameters with \EO (SS3) are technically an error, since SS3 should have
# no parameters. This appears to be rote copying based on xterm+pcc0.
vte+pcfkeys|VTE's variation on xterm+pcfkeys,
kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
use=xterm+pcfkeys,
gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
use=vte+pcfkeys,
vte|VTE aka GNOME Terminal,
use=vte-2012,
gnome|GNOME Terminal,
use=vte,
# palette is hardcoded...
vte-256color|VTE with xterm 256-colors,
use=xterm+256color, use=vte,
gnome-256color|GNOME Terminal with xterm 256-colors,
use=vte-256color,
# XFCE Terminal 0.2.5.4beta2
#
# This is based on some of the same source code, e.g., the VTE library, as
# gnome-terminal, but has fewer features, fails more screens in vttest.
# Since most of the terminfo-related behavior is due to the VTE library,
# the terminfo is the same as gnome-terminal.
xfce|Xfce Terminal,
use=vte-2008,
#### Other GNOME
# Multi-Gnome-Terminal 1.6.2
#
# This does not use VTE, and does have different behavior (compare xfce and
# gnome).
mgt|Multi GNOME Terminal,
indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
#### KDE
# This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
# or not is debatable).
kvt|KDE terminal,
bce, km@,
kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
# Konsole 1.0.1
# (formerly known as kvt)
#
# This program hardcodes $TERM to 'xterm', which is not accurate. However, to
# simplify this entry (and point out why konsole isn't xterm), we base this on
# xterm-r6. The default keyboard appears to be 'linux'.
#
# Notes:
# a) konsole implements several features from XFree86 xterm, though none of
# that is documented - except of course in its source code - apparently
# because its implementors are unaccustomed to reading documentation - as
# evidenced by the sparse and poorly edited documentation distributed with
# konsole. Some features such as the 1049 private mode are recognized but
# incorrectly implemented as a duplicate of the 47 private mode.
# b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
# sends PC-style escapes rather than vt100.
# c) fails vttest menu 3 (Test of character sets) because it does not properly
# parse some control sequences. Also fails vttest Primary Device Attributes
# by sending a bogus code (in the source it says it's supposed to be a
# vt220, which is doubly incorrect because it does not implement vt220
# control sequences except for a few special cases). Treat it as a
# mildly-broken vt102.
#
# Update for konsole 1.3.2:
# The 1049 private mode works (but see the other xterm screens in vttest).
# Primary Device Attributes now returns the code for a vt100 with advanced
# video option. Perhaps that's intended to be a "mildly-broken vt102".
#
# Updated for konsole 1.6.4:
# add konsole-solaris
#
# Updated for konsole 1.6.6:
# add control-key modifiers for function-keys, etc.
#
# vttest menu 1 shows that both konsole and gnome terminal do wrapping
# different from xterm (and vt100's). They have the same behavior in this
# detail, but it is unclear which copies the other.
konsole-base|KDE console window,
bce, km@, npc, XT,
ncv@,
bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1=\E[3~,
kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l,
rmso=\E[27m, rmul=\E[24m,
rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
use=ecma+color, use=xterm-r6,
konsole-linux|KDE console window with linux keyboard,
kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, use=konsole-base,
konsole-solaris|KDE console window with Solaris keyboard,
kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
# KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
# than testing the code.
konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
kend=\E[4~, khome=\E[1~, use=konsole-vt100,
# The value for kbs reflects local customization rather than the settings used
# for XFree86 xterm.
konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
use=konsole-vt100,
# Konsole does not implement shifted cursor-keys.
konsole+pcfkeys|konsole subset of xterm+pcfkeys,
kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2,
use=xterm+pcf0,
# KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
# it is still useful for deriving the other entries.
konsole-vt100|KDE console window with vt100 (sic) keyboard,
kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[H, use=konsole-base,
konsole-vt420pc|KDE console window with vt420 pc keyboard,
kbs=^H, kdch1=\177, use=konsole-vt100,
konsole-16color|klone of xterm-16color,
ncv#32, use=ibm+16color, use=konsole,
# make a default entry for konsole
konsole|KDE console window,
use=konsole-xf4x,
# palette is hardcoded...
konsole-256color|KDE console window with xterm 256-colors,
initc@, use=xterm+256color, use=konsole,
#### MLTERM
# This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
#
# It is nominally a vt102 emulator, with features borrowed from rxvt and
# xterm.
#
# The function keys are numbered based on shift/control/alt modifiers, except
# that the control-modifier itself is used to spawn a new copy of mlterm (the
# "-P" option). So control/F1 to control/F12 may not be usable, depending on
# how it is configured.
#
# kf1 to kf12 \E[11~ to \E[24~
# shift kf1 to kf12 \E[11;2~ to \E[24;2~
# alt kf1 to kf12 \E[11;3~ to \E[24;3~
# shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
# control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
# control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
# control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
# control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
#
mlterm|multi lingual terminal emulator,
am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
colors#8, cols#80, it#8, lines#24, pairs#64,
acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~,
khome=\EOH, kich1=\E[2~, kind=\EO1;2B, kmous=\E[M,
knp=\E[6~, kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i,
nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
# The insert/delete/home/end keys do not respond to modifiers because mlterm
# looks in its termcap to decide which string to send. If it used terminfo
# (when available), it could use the extended names introduced for xterm.
mlterm+pcfkeys|fragment for PC-style fkeys,
kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
mlterm-256color|mlterm 3.0 with xterm 256-colors,
use=xterm+256color, use=rxvt,
#### RXVT
# From: Thomas Dickey 04 Oct 1997
# Updated: Oezguer Kesim 02 Nov 1997
# Notes:
# rxvt 2.21b uses
# smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
# but some applications don't work with that.
# It also has an AIX extension
# box2=lqkxjmwuvtn,
# and
# ech=\E[%p1%dX,
# but the latter does not work correctly.
#
# The distributed terminfo says it implements hpa and vpa, but they are not
# implemented correctly, using relative rather than absolute positioning.
#
# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
# Since rxvt is not really compatible with xterm, it should be configured as
# "rxvt" or "rxvt-color".
#
# removed dch/dch1 because they are inconsistent with bce/ech -TD
# remove km as per tack test -TD
rxvt-basic|rxvt terminal base (X Window System),
OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I,
hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
ind=^J, is1=\E[?47l\E=\E[?1l,
is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
rmul=\E[24m,
rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
s0ds=\E(B, s1ds=\E(0, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
use=rxvt+pcfkeys, use=vt220+keypad,
# Key Codes from rxvt reference:
#
# Note: Shift + F1-F10 generates F11-F20
#
# For the keypad, use Shift to temporarily override Application-Keypad
# setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
# is off, escape sequences toggle Application-Keypad setting.
# Also note that values of Home, End, Delete may have been compiled
# differently on your system.
#
# Normal Shift Control Ctrl+Shift
# Tab ^I ESC [ Z ^I ESC [ Z
# BackSpace ^H ^? ^? ^?
# Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
# Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
# Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
# Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
# Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
# Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
# Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
# End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
# Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
# F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
# F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
# F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
# F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
# F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
# F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
# F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
# F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
# F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
# F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
# F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
# F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
# F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
# F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
# F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
# F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
# F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
# F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
# F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
# F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
#
# Application
# Up ESC [ A ESC [ a ESC O a ESC O A
# Down ESC [ B ESC [ b ESC O b ESC O B
# Right ESC [ C ESC [ c ESC O c ESC O C
# Left ESC [ D ESC [ d ESC O d ESC O D
# KP_Enter ^M ESC O M
# KP_F1 ESC O P ESC O P
# KP_F2 ESC O Q ESC O Q
# KP_F3 ESC O R ESC O R
# KP_F4 ESC O S ESC O S
# XK_KP_Multiply * ESC O j
# XK_KP_Add + ESC O k
# XK_KP_Separator , ESC O l
# XK_KP_Subtract - ESC O m
# XK_KP_Decimal . ESC O n
# XK_KP_Divide / ESC O o
# XK_KP_0 0 ESC O p
# XK_KP_1 1 ESC O q
# XK_KP_2 2 ESC O r
# XK_KP_3 3 ESC O s
# XK_KP_4 4 ESC O t
# XK_KP_5 5 ESC O u
# XK_KP_6 6 ESC O v
# XK_KP_7 7 ESC O w
# XK_KP_8 8 ESC O x
# XK_KP_9 9 ESC O y
#
# The source-code for rxvt actually defines mappings for F21-F35, using
# "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
# are rare, so this entry uses the shift- and control-modifiers as in
# xterm+pcfkeys to define keys past F12.
#
# kIC is normally not used, since rxvt performs a paste for that (shifted
# insert), unless private mode 35 is set.
#
# kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
# Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
rxvt+pcfkeys|fragment for PC-style fkeys,
kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
rxvt|rxvt terminal emulator (X Window System),
ncv@,
hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
rxvt-color|rxvt terminal emulator (X Window System),
use=rxvt,
rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
use=xterm+256color, use=rxvt,
rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
use=xterm+88color, use=rxvt,
rxvt-xpm|rxvt terminal emulator (X Window System),
use=rxvt,
rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
use=rxvt,
rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376,
use=rxvt-cygwin,
# This variant is supposed to work with rxvt 2.7.7 when compiled with
# NO_BRIGHTCOLOR defined. rxvt needs more work...
rxvt-16color|xterm with 16 colors like aixterm,
ncv#32, use=ibm+16color, use=rxvt,
#### MRXVT
# mrxvt 0.5.4
#
# mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
# makes its function-keys different from other flavors of rxvt -TD
mrxvt|multitabbed rxvt,
XT,
kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
use=rxvt,
mrxvt-256color|multitabbed rxvt with 256 colors,
use=xterm+256color, use=mrxvt,
#### ETERM
# From: Michael Jennings
#
# Eterm 0.9.3
#
# removed kf0 which conflicts with kf10 -TD
# remove cvvis which conflicts with cnorm -TD
# Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
# but does otherwise follow the rxvt+pcfkeys model -TD
# remove nonworking flash -TD
# remove km as per tack test -TD
Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
is1=\E[?47l\E>\E[?1l,
is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
rmso=\E[27m, rmul=\E[24m,
rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
use=ecma+color,
Eterm-256color|Eterm with xterm 256-colors,
use=xterm+256color, use=Eterm,
Eterm-88color|Eterm with 88 colors,
use=xterm+88color, use=Eterm,
#### ATERM
# Based on rxvt 2.4.8, it has a few differences in key bindings
aterm|AfterStep terminal,
XT,
kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
#### XITERM
# xiterm 0.5-5.2
# This is not based on xterm's source...
# vttest shows several problems with keyboard, cursor-movements.
# see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
xiterm|internationalized terminal emulator for X,
km@,
kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6,
#### HPTERM
# HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
# from BSD termcap. (hpterm: added empty , we have no idea what ACS
# chars look like --esr)
hpterm|X-hpterm|hp X11 terminal emulator,
am, da, db, mir, xhp,
cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
rmul=\E&d@,
sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
# HPUX 11 provides a color version.
hpterm-color|HP X11 terminal emulator with color,
ccc,
colors#64, pairs#8,
home=\E&a0y0C,
initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
#### EMU
# This is for the extensible terminal emulator on the X11R6 contrib tape.
# It corresponds to emu's internal emulation:
# emu -term emu
# emu's default sets TERM to "xterm", but that doesn't work well -TD
# fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
# fixes: add civis, cnorm, sgr -TD
emu|emu native mode,
am, bce, mir, msgr, xon,
colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01,
kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
setaf=\Er%i%p1%d;,
sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;,
sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
# vt220 Terminfo entry for the Emu emulation, corresponds to
# emu -term vt220
# with NumLock set (to make the keypad transmit kf0-kf9).
# fixes: add am, xenl, corrected sgr0 -TD
emu-220|Emu-220 (vt200-7bit mode),
am, xenl, xon,
cols#80, it#8, lines#24, vt#200,
acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
#### MVTERM
# A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
# print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
# indicate that it emulates more than one terminal, but incompletely.
#
# This is adapted from a FreeBSD bug-report by Daniel Rudy
# It is based on vt102's entry, with some subtle differences, but also
# has status line
# supports ANSI colors (except for 'op' string)
# apparently implements alternate screen like xterm
# does not use padding, of course.
mvterm|vv100|SwitchTerm aka mvTERM,
am, eslok, hs, km, mir, msgr, xenl,
colors#8, cols#80, it#8, lines#24, pairs#64,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
rmul=\E[m,
rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
#### MTERM
#
# This application is available by email from .
#
# "mterm -type ansi" sets $TERM to "ansi"
mterm-ansi|ANSI emulation,
am, bw, mir, msgr,
it#8,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
rmul=\E[24m,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
vpa=\E[%i%p1%dd,
# mterm normally sets $TERM to "mterm"
mterm|mouse-sun|Der Mouse term,
am, bw, mir,
it#8,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S,
cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W,
rmir=^O, rmso=^T, smir=^Q, smso=^V,
# "mterm -type decansi" sets $TERM to "decansi"
#
# note: kdch1, kfnd, kslt are in the source code, but do not work -TD
decansi|ANSI emulation with DEC compatibility hacks,
am, mir, msgr, xenl,
colors#8, it#8, pairs#64,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
u7=\E[6n, vpa=\E[%i%p1%dd,
#### VWM
#
# vwmterm is a terminal emulator written for the VWM console window manager
#
vwmterm|(vwm term),
am, bce, ccc, mir, msgr, npc, xenl, xon,
colors#8, pairs#64,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD,
cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K,
home=\E[H, il1=\E[L, ind=^J, invis=\E[8m, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~,
kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h,
smcup=\E[?1049h, smso=\E[3m, smul=\E[4m,
#### MGR
#
# MGR is a Bell Labs window system lighter-weight than X.
# These entries describe MGR's xterm-equivalent.
# They are courtesy of Vincent Broman 14 Jan 1997
#
mgr|Bellcore MGR (non X) window system terminal emulation,
am, km,
bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
smul=\E4n,
mgr-sun|Mgr window with Sun keyboard,
ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
mgr-linux|Mgr window with Linux keyboard,
ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
#### SIMPLETERM
# st.suckless.org
# st-0.1.1
#
# Note: the original terminfo description uses leading blank to persuade
# ncurses to use "st" as its name. Proper fix for that is to use "st" as an
# alias.
#
# Reading the code shows it should work for aixterm 16-colors
# - added st-16color
#
# Using tack:
# - set eo (erase-overstrike)
# - set xenl
# - tbc doesn't work
# - hts works
# - cbt doesn't work
# - shifted cursor-keys send sequences like rxvt
# - sgr referred to unimplemented "invis" mode.
# Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
simpleterm|st| simpleterm,
am, eo, mir, msgr, ul, xenl,
colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
cnorm=\E[?12l\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=\177,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
st-16color|simpleterm with 16-colors,
use=ibm+16color, use=simpleterm,
# 256 colors "works", but when running xterm's test-scripts, some garbage is
# shown in the titlebar.
st-256color|simpleterm with 256 colors,
ccc@,
initc@, use=xterm+256color, use=simpleterm,
#### TERMINATOR
# http://software.jessies.org/terminator/
# Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
# Debian/current -TD (2011/8/20)
#
# There are some packaging problems:
# a) using Java, the program starts off using 50Mb, and climbs from there,
# up to 114Mb after testing (no scrollback).
# b) it insists on reinstalling its terminal description in $HOME/.terminfo
# (two copies, just in case the host happens to be Mac OS X).
# I deleted this after testing with tack.
#
# Issues/features found with tack:
# a) tbc does not work (implying that hts also is broken).
# Comparing with the tabs utility shows a problem with the last tabstop on
# a line.
# b) has xterm-style shifted function-key strings
# meta also is used, but control is ignored.
# c) has xterm-style modifiers for cursor keys (shift, control, shift+control, meta)
# d) some combinations of shift/control send xterm-style sequences for
# insert/delete/home/end.
# e) numeric keypad sends only numbers (compare with vttest).
# f) meta mode (km) is not implemented.
#
# Issues found with ncurses test-program:
# a) bce is inconsistently implemented
# b) widths of Unicode values above 256 do not always agree with wcwidth.
#
# Checked with vttest, found low degree of compatibility there.
#
# Checked with xterm's scripts, found that the 256-color palette is fixed.
#
# Fixes:
# a) add sgr string
# b) corrected sgr0 to reset alternate character set
# c) modified smacs/rmacs to use SCS rather than SI/SO
# d) removed bce
# e) removed km
terminator|Terminator no line wrap,
eo, mir, msgr, xenl, xon,
colors#256, cols#80, it#8, lines#24, lm#0, pairs#32767,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
enacs=\E(B\E)0, flash=^G, home=\E[H, hpa=\E[%i%p1%dG,
ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
is1=\E[?47l\E=\E[?1l,
is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm,
setaf=\E[38;5;%p1%dm,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h,
smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
use=xterm+sl-twm,
######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
#
# Columbus UNIX virtual terminal. This terminal also appears in
# UNIX 4.0 and successors as line discipline 1 (?), but is
# undocumented and does not really work quite right.
cbunix|cb unix virtual terminal,
OTbs, am, da, db,
cols#80, lines#24, lm#0,
bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
smso=\Ea^D, smul=\Ea^A,
# (vremote: removed obsolete ":nl@:" -- esr)
vremote|virtual remote terminal,
am@,
cols#79, use=cbunix,
pty|4bsd pseudo teletype,
cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
smso=\Ea$, smul=\Ea!, use=cbunix,
#### Emacs
# The codes supported by the term.el terminal emulation in GNU Emacs 19.30
eterm|gnu emacs term.el terminal emulation,
am, mir, xenl,
cols#80, lines#24,
bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
smul=\E[4m,
# The codes supported by the term.el terminal emulation in GNU Emacs 22.2
eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
am, mir, msgr, xenl,
colors#8, cols#80, lines#24, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kbs=\177,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
u6=\E[%i%d;%dR, u7=\E[6n,
#### Screen
# Entries for use by the `screen' program by Juergen Weigert,
# Michael Schroeder, Oliver Laumann. The screen and
# screen-w entries came with version 3.7.1. The screen2 and screen3 entries
# come from University of Wisconsin and may be older.
# (screen: added on ANSI model -- esr)
#
# 'screen' defines extensions to termcap. Some are used in its terminal
# description:
# G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
# AX (bool) Does understand ANSI set default fg/bg color
# (\E[39m / \E[49m).
# S0 (str) Switch charset 'G0' to the specified charset.
# E0 (str) Switch charset 'G0' back to standard charset.
#
# tested with screen 3.09.08
screen|VT 100/ANSI X3.64 virtual terminal,
OTbs, OTpt, am, km, mir, msgr, xenl, G0,
colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
S0=\E(%p1%c, use=ecma+color,
# The bce and status-line entries are from screen 3.9.13 (and require some
# changes to .screenrc).
screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
bce,
ech@, use=screen,
screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
# ======================================================================
# Entries for GNU Screen with 16 colors.
# Those variations permit to benefit from 16 colors palette, and from
# bold font and blink attribute separated from bright colors. But they
# are less portable than the generic "screen" 8 color entries: Their
# usage makes real sense only if the terminals you attach and reattach
# do all support 16 color palette.
screen-16color|GNU Screen with 16 colors,
use=ibm+16color, use=screen,
screen-16color-s|GNU Screen with 16 colors and status line,
use=ibm+16color, use=screen-s,
screen-16color-bce|GNU Screen with 16 colors and BCE,
use=ibm+16color, use=screen-bce,
screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line,
bce, use=ibm+16color, use=screen-s,
# ======================================================================
# Entries for GNU Screen 4.02 with --enable-colors256.
screen-256color|GNU Screen with 256 colors,
ccc@,
initc@, use=xterm+256color, use=screen,
screen-256color-s|GNU Screen with 256 colors and status line,
ccc@,
initc@, use=xterm+256color, use=screen-s,
screen-256color-bce|GNU Screen with 256 colors and BCE,
ccc@,
initc@, use=xterm+256color, use=screen-bce,
screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line,
bce, ccc@,
initc@, use=xterm+256color, use=screen-s,
# ======================================================================
# Read the fine manpage:
# When screen tries to figure out a terminal name for
# itself, it first looks for an entry named "screen.",
# where is the contents of your $TERM variable. If
# no such entry exists, screen tries "screen" (or "screen-w"
# if the terminal is wide (132 cols or more)). If even this
# entry cannot be found, "vt100" is used as a substitute.
#
# Notwithstanding the manpage, screen uses its own notion of the termcap
# and some keys from "screen." are ignored. Here is an entry which
# covers those (tested with screen 4.00.02) -TD
screen+fkeys|function-keys according to screen,
kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
khome=\E[1~, kslt@,
#
# Here are a few customized entries which are useful -TD
#
# Notes:
# (a) screen does not support invis.
# (b) screen's implementation of bw is incorrect according to tack.
# (c) screen appears to hardcode the strings for khome/kend, making it
# necessary to override the "use=" clause's values (screen+fkeys).
# (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
# which is NOT the same as the terminfo screen..
# (e) when screen finds one of these customized entries, it sets $TERM to
# match. Hence, no "screen.xterm" entry is provided, since that would
# create heartburn for people running remote xterm's.
#
# xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
# since the default translations override the built-in keycode
# translation. They are suppressed here to show what is tested by tack.
screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
bce@, bw,
invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
E3@, use=screen+fkeys, use=xterm-new,
# xterm-r6 does not really support khome/kend unless it is propped up by
# the translations resource.
screen.xterm-r6|screen customized for X11R6 xterm,
bw, use=screen+fkeys, use=xterm-r6,
# Color applications running in screen and TeraTerm do not play well together
# on Solaris because Sun's curses implementation gets confused.
screen.teraterm|disable ncv in teraterm,
ncv#127,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
use=screen+fkeys, use=screen,
# Other terminals
screen.rxvt|screen in rxvt,
bw, XT,
cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
screen.Eterm|screen in Eterm,
use=screen+fkeys, use=Eterm,
screen.mrxvt|screen in mrxvt,
use=screen+fkeys, use=mrxvt,
screen.vte|screen in any VTE-based terminal,
use=screen+fkeys, use=vte,
screen.gnome|screen in GNOME Terminal,
use=screen+fkeys, use=gnome,
screen.konsole|screen in KDE console window,
use=screen+fkeys, use=konsole,
# fix the backspace key
screen.linux|screen in linux console,
bw,
kbs=\177, kcbt@, use=screen+fkeys, use=screen,
screen.mlterm|screen in mlterm,
use=screen+fkeys, use=mlterm,
# The default "screen" entry is reasonably portable, but not optimal for the
# most widely-used terminal emulators. The "bce" capability is supported in
# screen since 3.9.13, and when used, will require fewer characters to be sent
# to the terminal for updates.
#
# If you are using only terminals which support bce, then you can use this
# feature in your screen configuration.
#
# Adding these lines to your ".screenrc" file will allow using these customized
# entries:
# term screen-bce
# bce on
# defbce on
screen-bce.xterm-new|screen optimized for modern xterm,
bce,
ech@, use=screen.xterm-new,
screen-bce.rxvt|screen optimized for rxvt,
bce,
ech@, use=screen.rxvt,
screen-bce.Eterm|screen optimized for Eterm,
bce,
ech@, use=screen.Eterm,
screen-bce.mrxvt|screen optimized for mrxvt,
bce,
ech@, use=screen.mrxvt,
screen-bce.gnome|screen optimized for GNOME-Terminal,
bce,
ech@, use=screen.gnome,
screen-bce.konsole|screen optimized for KDE console window,
bce,
ech@, use=screen.konsole,
screen-bce.linux|screen optimized for linux console,
bce,
ech@, use=screen.linux,
screen-bce.mlterm|screen optimized for mlterm,
bce,
ech@, use=screen.mlterm,
screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
cols#132, use=screen,
screen2|old VT 100/ANSI X3.64 virtual terminal,
cols#80, it#8, lines#24,
cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
smso=\E[3m, smul=\E[4m, tbc=\E[3g,
# (screen3: removed unknown ":xv:LP:G0:" -- esr)
screen3|older VT 100/ANSI X3.64 virtual terminal,
km, mir, msgr,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
smul=\E[4m, tbc=\E[3g,
#### NCSA Telnet
# Francesco Potorti :
# NCSA telnet is one of the most used telnet clients for the Macintosh. It has
# been maintained until recently by the National Center for Supercomputer
# Applications, and it is feature rich, stable and free. It can be downloaded
# from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
# xterm+sl, and the docs at NCSA. It works well.
#
# NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
# The terminal options should be set as follows:
# Xterm sequences ON
# use VT wrap mode ON
# use Emacs arrow keys OFF
# CTRL-COMND is Emacs meta ON
# 8 bit mode ON
# answerback string: "ncsa-vt220-8"
# setup keys: all disabled
#
# Application mode is not used.
#
# Other special mappings:
# Apple VT220
# HELP Find
# HOME Insert here
# PAGEUP Remove
# DEL Select
# END Prev Screen
# PAGEDOWN Next Screen
#
# Though it supports ANSI color, NCSA Telnet uses color to represent blinking
# text.
#
# The status-line manipulation is a mapping of the xterm-compatible control
# sequences for setting the window-title. So you must use tsl and fsl in
# pairs, since the latter ends the string that is loaded to the window-title.
ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
am, km, mir, msgr, xenl,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, el1=\E[1K, enacs=\E)0, flash=\E[?5h\E[?5l,
home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
ind=\n$<150*>,
is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
rmso=\E[27m, rmul=\E[24m,
rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
u8=\E[?62;1;6c, use=xterm+sl, use=ansi+enq,
ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
use=ncsa-m, use=klone+color,
ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
hs@,
dsl@, fsl@, tsl@, use=ncsa,
ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
hs@,
dsl@, fsl@, tsl@, use=ncsa-m,
# alternate -TD:
# The documented function-key mapping refers to the Apple Extended Keyboard
# (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
# codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
# some keyboards and many applications require these as F1-F4.
#
ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, use=ncsa,
#### Pilot Pro Palm-Top
#
# Termcap for Top Gun Telnet and SSH on the Palm Pilot.
# http://www.ai/~iang/TGssh/
pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
OTbs, am, xenl,
cols#39, lines#16,
bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
rmso=\EB, smso=\Eb,
# From: Federico Bianchi
# These entries are for the Embeddable Linux Kernel System (ELKS)
# project - an heavily stripped down Linux to be run on 16 bit
# boxes or, eventually, to be used in embedded systems - and have been
# adapted from the stock ELKS termcap. The project itself looks stalled,
# and the latest improvements I know of date back to March 2000.
#
# To cope with the ELKS dumb console I added an "elks-glasstty" entry;
# as an added bonus, this deals with all the capabilities common to
# both VT52 and ANSI (or, eventually, "special") modes.
elks-glasstty|ELKS glass-TTY capabilities,
OTbs, am,
cols#80, it#8, lines#25,
bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
nel=^M^J,
elks-vt52|ELKS vt52 console,
clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
home=\EH, use=elks-glasstty,
elks-ansi|ELKS ANSI console,
clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
rmso=\E[m, smso=\E[7m, use=elks-glasstty,
# As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
# instead of VT52, but the "elks" entry still refers to the latter.
elks|default ELKS console,
use=elks-vt52,
# Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
# one but in screen size
sibo|ELKS SIBO console,
cols#61, it#8, lines#20, use=elks-vt52,
######## COMMERCIAL WORKSTATION CONSOLES
#
#### Alpha consoles
#
# This is from the OSF/1 Release 1.0 termcap file
pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
am, xon,
cols#80, lines#25,
bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
#### Sun consoles
#
# :is1: resets scrolling region in case a previous user had used "tset vt100"
oldsun|Sun Microsystems Workstation console,
OTbs, am, km, mir, msgr,
cols#80, it#8, lines#34,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
rmso=\E[m, sgr0=\E[m, smso=\E[7m,
# From: Alexander Lukyanov , 14 Nov 1995
# capability later corrected by J.T. Conklin
# SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
sun-il|Sun Microsystems console with working insert-line,
am, km, msgr,
cols#80, lines#34,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z,
kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
smso=\E[7m, u8=\E[1t, u9=\E[11t,
# On some versions of CGSIX framebuffer firmware (SparcStation 5), /
# flake out on the last line. Unfortunately, without them the terminal has no
# way to scroll.
sun-cgsix|sun-ss5|Sun SparcStation 5 console,
il@, il1@, use=sun-il,
# If you are using an SS5, change the sun definition to use sun-ss5.
sun|sun1|sun2|Sun Microsystems Inc. workstation console,
use=sun-il,
sun+sl|Sun Workstation window status line,
hs,
dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
# From: Tue Sep 24 13:14:44 1985
sun-s|Sun Microsystems Workstation window with status line,
hs,
dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
hs,
dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
sun-48|Sun 48-line window,
cols#80, lines#48, use=sun,
sun-34|Sun 34-line window,
cols#80, lines#34, use=sun,
sun-24|Sun 24-line window,
cols#80, lines#24, use=sun,
sun-17|Sun 17-line window,
cols#80, lines#17, use=sun,
sun-12|Sun 12-line window,
cols#80, lines#12, use=sun,
sun-1|Sun 1-line window for sysline,
eslok, hs,
cols#80, lines#1,
dsl=^L, fsl=\E[K, tsl=^M, use=sun,
sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
ich1@, rmir@, smir@, use=sun,
sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
lines#35,
rmcup=\E[>4h, smcup=\E[>4l, use=sun,
sun-type4|Sun Workstation console with type 4 keyboard,
kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
kcuu1=\E[215z, use=sun-il,
# Most of the current references to sun-color are from users wondering why this
# is the default on install. Details from reading the wscons manpage, adding
# cub, etc., here (rather than in the base sun-il entry) since it is not clear
# when those were added -TD (2005-05-28)
#
# According to wscons manpage, color is supported only on IA systems.
# Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
# does not list these. It also sets ncv#3, however that corresponds to
# underline and standout.
#
# Since the documentation and terminfo do not agree, see also current code at
# http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
#
# That (actually a different driver which "supports" sun-color) also supports
# these features:
# vpa=\E[%i%p1%dd
# hpa=\E[%i%p1%d`
# cbt=\E[Z
# dim=\E[2m
# blink=\E[5m
# It supports bold, but not underline -TD (2009-09-19)
sun-color|Sun Microsystems Workstation console with color support (IA systems),
colors#8, ncv#3, pairs#64,
bold=\E[1m, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
sgr=\E[0%?%p6%t;1%;%?%p1%p3%|%t;7%;m, sgr0=\E[m,
smso=\E[7m, use=sun,
#### Iris consoles
#
# (wsiris: this had extension capabilities
# :HS=\E7F2:HE=\E7F7:\
# :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
# See the note on Iris extensions near the end of this file.
# Finally, removed suboptimal =\EH\EJ and added &
# from BRL -- esr)
wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
OTbs, OTnc, OTpt, am,
OTkn#3, cols#80, it#8, lines#40,
OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
smul=\E7R2\E9P,
#### NeWS consoles
#
# Console terminal windows under the NeWS (Sun's Display Postscript windowing
# environment). Note: these have nothing to do with Sony's News workstation
# line.
#
# Entry for NeWS's psterm from Eric Messick & Hugh Daniel
# (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
psterm|psterm-basic|NeWS psterm-80x34,
OTbs, am, hs, km, ul,
cols#80, it#8, lines#34,
blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
tsl=\EOl,
psterm-96x48|NeWS psterm 96x48,
cols#96, lines#48, use=psterm,
psterm-90x28|NeWS psterm 90x28,
cols#90, lines#28, use=psterm,
psterm-80x24|NeWS psterm 80x24,
cols#80, lines#24, use=psterm,
# This is a faster termcap for psterm. Warning: if you use this termcap,
# some control characters you type will do strange things to the screen.
# (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
psterm-fast|NeWS psterm fast version (flaky ctrl chars),
OTbs, am, hs, km, ul,
cols#80, it#8, lines#34,
blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
smso=^Oo, smul=^Ou, tsl=^Ol,
#### NeXT consoles
#
# Use `glasstty' for the Workspace application
#
# From: Dave Wetzel 22 Dec 1995
next|NeXT console,
am, xt,
cols#80, it#8, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
nextshell|NeXT Shell application,
am,
cols#80,
bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
kcud1=^J, nel=^M^J,
#### Sony NEWS workstations
#
# (news-unk: this had :KB=news: -- esr)
news-unk|SONY NEWS vt100 emulator common entry,
OTbs, OTpt, am, xenl,
cols#80,
OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
ed=\E[J, el=\E[K, home=\E[H, ht=^I,
if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
is2=\E[?7h\E[?1h\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
#
# (news-29: this had :TY=ascii: --esr)
news-29,
lines#29, use=news-unk,
# (news-29-euc: this had :TY=euc: --esr)
news-29-euc,
use=news-29,
# (news-29-sjis: this had :TY=sjis: --esr)
news-29-sjis,
use=news-29,
#
# (news-33: this had :TY=ascii: --esr)
news-33,
lines#33, use=news-unk,
# (news-33-euc: this had :TY=euc: --esr)
news-33-euc,
use=news-33,
# (news-33-sjis: this had :TY=sjis: --esr)
news-33-sjis,
use=news-33,
#
# (news-42: this had :TY=ascii: --esr)
news-42,
lines#42, use=news-unk,
# (news-42-euc: this had :TY=euc: --esr)
news-42-euc,
use=news-42,
# (news-42-sjis: this had :TY=sjis: --esr)
news-42-sjis,
use=news-42,
#
# NEWS-OS old termcap entry
#
# (news-old-unk: this had :KB=news:TY=sjis: --esr)
news-old-unk|SONY NEWS vt100 emulator common entry,
OTbs, OTpt, am, xenl,
cols#80, vt#3,
OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
#
# (nwp512: this had :DE=^H:, which I think means --esr)
nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
OTbs,
lines#40,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
use=news-old-unk,
#
# (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
lines#42,
is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
use=news-old-unk,
#
# (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as . --esr)
nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
OTbs,
lines#40,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
use=news-old-unk,
#
# (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
OTbs,
lines#31,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
use=news-old-unk,
#
# (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as ; --esr)
# also the alias vt100-bm.
nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
OTbs,
lines#33,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8,
use=news-old-unk,
#
# (nwp513-o: had :DE=^H:, I think that's ; also the alias vt100-bm --esr)
nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
OTbs,
lines#31,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
use=news-old-unk,
#
# (news28: this had :DE=^H:, I think that's , and :KB=nws1200: --esr)
news28|sony vt100 emulator 28 lines,
OTbs,
lines#28,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8,
use=news-old-unk,
#
# (news29: this had :TY=ascii:KB=nws1200:\ --esr)
news29|news28-a|sony vt100 emulator 29 lines,
lines#29,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8,
use=news-old-unk,
#
# (news511: this had :TY=sjis: --esr)
nwp511|nwp-511|nwp-511 vt100,
OTbs, OTpt, am, xenl,
cols#80, lines#24,
clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
ed=\E[J$<30/>, el=\E[K$<3/>,
flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
smso=\E[7m$<2/>, smul=\E[4m$<2/>,
# (news517: this had :TY=sjis:. --esr)
nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
eslok, hs,
cols#80, lines#30,
OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
tsl=\E[1$}\E[;%df, use=vt200,
# (news517-w: this had :TY=sjis:. --esr)
nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
eslok, hs,
cols#132, lines#50,
OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
tsl=\E[1$}\E[;%df, use=vt200,
#### Common Desktop Environment
#
# This ships with Sun's CDE in Solaris 2.5
# Corrected Sun Aug 9 1998 by Alexander V. Lukyanov
dtterm|CDE desktop terminal,
am, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, lm#0, ncv@,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
sc=\E7,
sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
######## Non-Unix Consoles
#
#### EMX termcap.dat compatibility modes
#
# Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
# no_color_video to inform the application that standout(1), underline(2)
# reverse(4) and invisible(64) don't work with color.
emx-base|DOS special keys,
bce, bw,
it#8, ncv#71,
bel=^G, use=ansi.sys,
# Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
# a Unix-style environment used on OS/2. (Note that the suffix makes some
# names longer than 14 characters, the nominal maximum).
#
# Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
ansi-emx|ANSI.SYS color,
am, bce, eo, mir, msgr, xon,
colors#8, cols#80, it#8, lines#25, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J,
rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m,
rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m,
smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c,
u9=\E[c, use=emx-base,
# nice colors for Emacs (white on blue, mode line white on cyan)
ansi-color-2-emx|ANSI.SYS color 2,
clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
smul=\E[1;36;44m, use=ansi-emx,
# nice colors for Emacs (white on black, mode line black on cyan)
ansi-color-3-emx|ANSI.SYS color 3,
clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
smul=\E[0;36;40m, use=ansi-emx,
mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
am,
cols#80, it#8, lines#24,
clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
sgr0=\E[0m,
#### Cygwin
# Use this for cygwin32 (tested with beta 19.1)
# underline is colored bright magenta
# shifted kf1-kf12 are kf11-kf22
cygwinB19|ansi emulation for cygwin32,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
use=ansi.sys,
# Use this for cygwin (tested with version 1.1.0).
# I've combined pcansi and linux. Some values of course were different and
# I've indicated which of these were and which I used.
# Cheers, [email protected]
# several changes based on running with tack and comparing with older entry -TD
# more changes from csw:
# add cbt [backtab]
# remove eo [erase overstrike with blank]
# change clear was \E[H\E[J now \E[2J (faster?)
# remove cols
# remove lines
# remove ncv#3 [colors collide with highlights, bitmask] not applicable
# to MSDOS box?
# add cub [cursor back param]
# add cuf [cursor forward param]
# add cuu [cursor up param]
# add cud [cursor down param]
# add hs [has status line]
# add fsl [return from status line]
# add tsl [go to status line]
# add smacs [Start alt charset] (not sure if this works)
# add rmacs [End alt charset] (ditto)
# add smcup [enter_ca_mode] (save console; thanks Corinna)
# add rmcup [exit_ca_mode] (restore console; thanks Corinna)
# add kb2 [center of keypad]
# add u8 [user string 8] \E[?6c
# add el [clear to end of line] \E[K
# Notes:
# cnorm [make cursor normal] not implemented
# flash [flash] not implemented
# blink [blink] not implemented very usefully in cygwin? \E[5m
# dim [dim] not implemented very usefully in cygwin? \E[2m
# cub1 [cursor back 1] typically \E[D, but ^H is faster?
# kNXT [shifted next key] not implemented
# kPRV [shifted prev key] not implemented
# khome [home key] really is \E[1~ NOT \E[H
# tbc [clear tab stops] not implemented
# xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
# smpch [Start PC charset] is \E[11m, same as smacs
# rmpch [End PC charset] is \E[10m, same as rmacs
# mir [move in insert mode] fails in tack?
# bce [back color erase] causes problems with change background color?
# cvvis [make cursor very visible] causes a stackdump when testing with
# testcurs using the output option? \E[?25h\E[?8c
# civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
# ech [erase characters param] broken \E[%p1%dX
# kcbt [back-tab key] not implemented in cygwin? \E[Z
#
# 2005/11/12 -TD
# Remove cbt since it does not work in current cygwin
# Add 'mir' and 'in' flags based on tack
cygwin|ansi emulation for Cygwin,
am, hs, mir, msgr, xon,
colors#8, it#8, pairs#64,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD,
cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G,
kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
vpa=\E[%i%p1%dd, use=vt102+enq,
# I've supplied this so that you can help test new values and add other
# features. Cheers, [email protected].
#
# Some features are from pcansi. The op value is from linux. Function-keys
# are from linux. These have been tested not to cause problems. xenl was in
# this list, but DOES cause problems so it has been removed
cygwinDBG|Debug Version for Cygwin,
am, eo, mir, msgr, xon,
colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m,
rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
#### DJGPP
# Key definitions:
# The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
# encodings used by other x86 environments. All others are invented for DJGPP.
# Oddly enough, while several combinations of modifiers are tabulated, there is
# none for shifted cursor keys.
#
# F1 \E[[A
# F2 \E[[B
# F3 \E[[C
# F4 \E[[D
# F5 \E[[E
# F6 \E[17~
# F7 \E[18~
# F8 \E[19~
# F9 \E[20~
# F10 \E[21~
# F11 \E[23~
# F12 \E[24~
#
# Delete \E[3~
# Down Arrow \E[B
# End \E[4~
# Home \E[1~
# Insert \E[2~
# Left Arrow \E[D
# Page Down \E[6~
# Page Up \E[5~
# Right Arrow \E[C
# Up Arrow \E[A
#
# Shift-F1 \E[25~
# Shift-F2 \E[26~
# Shift-F3 \E[27~
# Shift-F4 \E[28~
# Shift-F5 \E[29~
# Shift-F6 \E[30~
# Shift-F7 \E[31~
# Shift-F8 \E[32~
# Shift-F9 \E[33~
# Shift-F10 \E[34~
# Shift-F11 \E[35~
# Shift-F12 \E[36~
#
# Ctrl-F1 \E[47~
# Ctrl-F2 \E[48~
# Ctrl-F3 \E[49~
# Ctrl-F4 \E[50~
# Ctrl-F5 \E[51~
# Ctrl-F6 \E[52~
# Ctrl-F7 \E[53~
# Ctrl-F8 \E[54~
# Ctrl-F9 \E[55~
# Ctrl-F10 \E[56~
# Ctrl-F11 \E[57~
# Ctrl-F12 \E[58~
#
# Ctrl-Delete \E[43~
# Ctrl-Down Arrow \E[38~
# Ctrl-End \E[44~
# Ctrl-Home \E[41~
# Ctrl-Insert \E[42~
# Ctrl-Left Arrow \E[39~
# Ctrl-Page Down \E[46~
# Ctrl-Page Up \E[45~
# Ctrl-Right Arrow \E[40~
# Ctrl-Up Arrow \E[37~
#
# Alt-F1 \E[59~
# Alt-F2 \E[60~
# Alt-F3 \E[61~
# Alt-F4 \E[62~
# Alt-F5 \E[63~
# Alt-F6 \E[64~
# Alt-F7 \E[65~
# Alt-F8 \E[66~
# Alt-F9 \E[67~
# Alt-F10 \E[68~
# Alt-F11 \E[79~
# Alt-F12 \E[80~
#
# Alt-Delete \E[65~
# Alt-Down Arrow \E[60~
# Alt-End \E[66~
# Alt-Home \E[41~
# Alt-Insert \E[64~
# Alt-Left Arrow \E[61~
# Alt-Page Down \E[68~
# Alt-Page Up \E[67~
# Alt-Right Arrow \E[62~
# Alt-Up Arrow \E[59~
#
# Also:
# Alt-A \E[82~
# Alt-B \E[82~
# Alt-C \E[83~
# Alt-D \E[84~
# Alt-E \E[85~
# Alt-F \E[86~
# Alt-G \E[87~
# Alt-H \E[88~
# Alt-I \E[89~
# Alt-J \E[90~
# Alt-K \E[91~
# Alt-L \E[92~
# Alt-M \E[93~
# Alt-N \E[94~
# Alt-O \E[95~
# Alt-P \E[96~
# Alt-Q \E[97~
# Alt-R \E[98~
# Alt-S \E[99~
# Alt-T \E[100~
# Alt-U \E[101~
# Alt-V \E[102~
# Alt-W \E[103~
# Alt-X \E[104~
# Alt-Y \E[105~
# Alt-Z \E[106~
djgpp|ansi emulation for DJGPP alpha,
am, bce, msgr, xhp, xon, xt,
colors#8, it#8, pairs#64,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J,
op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m,
sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
djgpp203|Entry for DJGPP 2.03,
OTbs, am,
cols#80, it#8, lines#25,
bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
kcud1=^J, nel=^M^J,
djgpp204|Entry for DJGPP 2.04,
OTbs, am, AX,
colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD,
cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m,
ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
#### U/Win
# This is tested using U/Win's telnet. Scrolling is omitted because it is
# buggy. Another odd bug appears when displaying "~" in alternate character
# set (the emulator spits out error messages). Compare with att6386 -TD
uwin|U/Win 3.2 console,
am, eo, in, msgr, xenl, xon,
colors#8, it#8, ncv#58, pairs#64,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP,
kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8,
rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
#### Microsoft (miscellaneous)
# This entry fits the Windows NT console when the _POSIX_TERM environment
# variable is set to 'on'. While the Windows NT POSIX console is seldom used,
# the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
# stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
# systems is not, and (surprise!) they match very well.
#
# See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
# VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
# are the installation instructions a pile of mind-numbing bureaucratese,
# but the termcap entry is actually broken and unusable as given; the :do:
# capability is misspelled "d".
#
# To use this, you need to a bunch of environment variables:
#
# SET _POSIX_TERM=on
# SET TERM=ansi
# SET TERMCAP=location of termcap file in POSIX file format
# which is case-sensitive.
# e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
# SET TMP=//C/TEMP
#
# Important note: setting the TMP environment variable in POSIX style renders
# it incompatible with a lot of other applications, including Visual C++. So
# you should have a separate command window just for vi. All the other
# variables may be permanently set in the Control Panel\System applet.
#
# You can find out more about the restrictions of this facility at
# .
#
# From: Federico Bianchi , 15 Jan 1997
ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
am, bw, msgr,
cols#80, it#8, lines#25,
bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
# From: [email protected]
# Date: 19 Feb 93 23:41:07 GMT
# Here's a combination of ansi and vt100 termcap
# entries that works nearly perfectly for me
# (Gateway 2000 Handbook and Microsoft Works 3.0):
pcmw|PC running Microsoft Works,
am, xenl,
cols#80, it#8, lines#24, vt#3,
bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
tbc=\E[3g$<2/>,
# From: Federico Bianchi
# This is the entry for the OpenNT terminal.
# The ntconsole name is for backward compatability.
# This is for OpenNT 2.0 and later.
# Later OpenNT was renamed to Interix.
#
# Presently it is distributed by Microsoft as Services For Unix (SFU).
# The 3.5 beta contains ncurses 4.2 (that is header files and executables,
# the documentation dates from 1.9.9e) -TD
interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
am, bw, msgr,
colors#8, cols#80, lines#25, ncv#3, pairs#64,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD,
cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA,
kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD,
kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI,
kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM,
kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR,
kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV,
kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa,
kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe,
kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj,
kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5,
kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt,
kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy,
kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-,
kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9,
kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J,
op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm,
sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m, smul=\E[4m,
opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
lines#35, use=opennt,
opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
lines#50, use=opennt,
opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
lines#60, use=opennt,
opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
lines#100, use=opennt,
# OpenNT wide terminals
opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
cols#125, use=opennt,
opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
lines#35, use=opennt-w,
opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
lines#50, use=opennt-w,
opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
lines#60, use=opennt-w,
opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
cols#132, use=opennt,
# OpenNT terminals with no smcup/rmcup (names match termcap entries)
interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
rmcup@, smcup@, use=opennt,
opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
lines#35, use=opennt-nti,
opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
lines#50, use=opennt-nti,
opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
lines#60, use=opennt-nti,
opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
lines#100, use=opennt-nti,
######## COMMON TERMINAL TYPES
#
# This section describes terminal classes and maker brands that are still
# quite common, but have proprietary command sets not blessed by ANSI.
#
#### Altos
#
# Altos made a moderately successful line of UNIX boxes. In 1990 they were
# bought out by Acer, a major Taiwanese manufacturer of PC-clones.
# Acer has a web site at http://www.acer.com.
#
# Altos descriptions from Ted Mittelstaedt 4 Sep 1993
# His comments suggest they were shipped with the system.
#
# (altos2: had extension capabilities
# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
# :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
# :HL=^AP\r:SP=\E[i:\
# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
# :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
# Comparison with the k* capabilities makes it obvious that the c* things are
# shift keys. I have renamed them to keys 32 and up accordingly. Also,
# :sr: was given as a boolean-- esr)
altos2|alt2|altos-2|altos II,
cols#80, it#8, lines#24, xmc#0,
clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
smam=\E[?7h, smso=\E[7m, smul=\E[4m,
# (altos3: had extension capabilities
# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
# :HL=^AP\r:SP=\E[i:\
# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
altos4|alt4|altos-4|altos IV,
use=wy50,
# (altos7: had extension capabilities:
# :GG#0:GI=\EH8:GF=\EH7:\
# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
# Comparison with the k* capabilities makes it obvious that the c* things are
# shift keys. I have renamed them to keys 32 and up accordingly. I have
# also made this entry relative to adm12 in order to give it an . The
# imported by use=adm+sgr may work, let me know. -- esr)
altos7|alt7|altos VII,
am, mir,
cols#80, lines#24, xmc#0,
acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
ind=^J, invis=\EG1,
is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
rmir=\Er, smir=\Eq, use=adm+sgr,
altos7pc|alt7pc|altos PC VII,
kend=\ET, use=altos7,
#### Hewlett-Packard (hp)
#
# Hewlett-Packard
# 8000 Foothills Blvd
# Roseville, CA 95747
# Vox: 1-(916)-785-4363 (Technical response line for VDTs)
# 1-(800)-633-3600 (General customer support)
#
#
# As of March 1998, HP no longer has any terminals in production.
# The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
# supported (they still have parts). So are the 2392a and 2394a.
# See the WORKSTATION CONSOLES section for the 700s.
#
# Generic HP terminal - this should (hopefully) work on any HP terminal.
hpgeneric|hp|hewlett-packard generic terminal,
OTbs, OTpt, am, da, db, mir, xhp,
cols#80, lines#24, lm#0, vt#6,
bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
vpa=\E&a%p1%dY,
hp110|hewlett-packard model 110 portable,
lines#16, use=hpgeneric,
hp+pfk+cr|hp function keys with CR,
kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
hp+pfk-cr|hp function keys w/o CR,
kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
kf8=\Ew,
# The hp2621s use the same keys for the arrows and function keys,
# but not separate escape sequences. These definitions allow the
# user to use those keys as arrow keys rather than as function
# keys.
hp+pfk+arrows|hp alternate arrow definitions,
kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
kll=\Eq\r, kri=\Es\r,
hp+arrows|hp arrow definitions,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
kind=\ES, kll=\EF, kri=\ET,
# Generic stuff from the HP 262x series
#
hp262x|HP 262x terminals,
xhp,
blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c,
sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
# Note: no on HPs since that homes to top of memory, not screen.
# Due to severe 2621 braindamage, the only way to get the arrow keys to
# transmit anything at all is to turn on the function key labels
# with , and even then the user has to hold down shift!
# The default 2621 turns off the labels except when it has to to
# enable the function keys. If your installation prefers labels
# on all the time, or off all the time (at the "expense" of the
# function keys), use 2621-nl or 2621-wl.
#
# Note: there are newer ROMs for 2621's that allow you to set
# strap A so the regular arrow keys xmit \EA, etc, as with the
# 2645. However, even with this strap set, the terminal stops
# xmitting if you reset it, until you unset and reset the strap!
# Since there is no way to set/unset the strap with an escape
# sequence, we don't use it in the default.
# If you like, you can use 2621-ba (brain-damaged arrow keys).
hp2621-ba|2621 w/new rom and strap A set,
rmkx@, smkx@, use=hp+arrows, use=hp2621,
# hp2621 with function labels. Most of the time they are off,
# but inside vi, the function key labels appear. You have to
# hold down shift to get them to xmit.
hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
hp2621-fl|hp 2621,
xhp@, xon,
pb#19200,
cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
use=hp+pfk+cr, use=hpgeneric,
# To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
hp2621p|hp 2621 with printer,
mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
hp2621p-a|hp2621p with fn as arrows,
use=hp+pfk+arrows, use=hp2621p,
# hp2621 with k45 keyboard
hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
# 2621 using all 48 lines of memory, only 24 visible at any time.
hp2621-48|48 line 2621,
lines#48,
cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
use=hp2621,
# 2621 with no labels ever. Also prevents vi delays on escape.
hp2621-nl|hp 2621 with no labels,
kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
use=hp2621-fl,
# Needed for UCB ARPAVAX console, since lsi-11 expands tabs
# (wrong).
#
hp2621-nt|hp 2621 w/no tabs,
ht@, use=hp2621,
# Hp 2624 B with 4 or 10 pages of memory.
#
# Some assumptions are made with this entry. These settings are
# NOT set up by the initialization strings.
#
# Port Configuration
# RecvPace=Xon/Xoff
# XmitPace=Xon/Xoff
# StripNulDel=Yes
#
# Terminal Configuration
# InhHndShk=Yes
# InhDC2=Yes
# XmitFnctn(A)=No
# InhEolWrp=No
#
# Note: the 2624 DOES have a true , believe it or not!
#
# The 2624 has an "error line" to which messages can be sent.
# This is CLOSE to what is expected for a "status line". However,
# after a message is sent to the "error line", the next carriage
# return is EATEN and the "error line" is turned back off again!
# So I guess we can't define , , , , , .
#
# This entry supports emacs (and any other program that uses raw
# mode) at 4800 baud and less. I couldn't get the padding right
# for 9600.
#
# (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
da, db,
lm#96,
flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F,
use=hp+labels, use=scrhp,
# This hp2626 entry does not use any of the fancy windowing stuff
# of the 2626.
#
# Indeed, terminfo does not yet handle such stuff. Since changing
# any window clears memory, it is probably not possible to use
# this for screen opt.
#
# ed is incredibly slow most of the time - I am guessing at the
# exact padding. Since the terminal uses xoff/xon this is intended
# only for cost computation, so that the terminal will prefer el
# or even dl1 which is probably faster!
#
# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
# extra slow on the last line of the window.
#
# The padding probably should be changed.
#
hp2626|hp2626a|hp2626p|hp 2626,
da, db,
lm#0, pb#19200,
ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
use=hp+labels, use=scrhp,
# This entry is for sysline. It allocates a 23 line window with
# a 115 line workspace for regular use, and a 1 line window for
# the status line.
#
# This assumes port 2 is being used.
# Turn off horizontal line, Create ws #1 with 115 lines,
# Create ws #2 with 1 line, Create window #1 lines 1-23,
# Create window #2 lines 24-24, Attach cursor to workspace #1.
# Note that this clears the tabs so it must be done by tset before
# it sets the tabs.
#
hp2626-s|hp 2626 using only 23 lines,
eslok, hs,
lines#23,
fsl=\E&d@\E&w7f2p1I\E&w4f1I,
is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
# Force terminal back to 24 lines after being 23.
hp2626-ns|hp 2626 using all 24 lines,
is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
use=hp2626,
# Various entries useful for small windows on 2626.
hp2626-12|hewlett-packard 2626 12 lines,
lines#12, use=hp2626,
hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
cols#40, lines#12, use=hp2626,
hp2626-x40|hewlett-packard 2626 40 columns,
cols#40, use=hp2626,
hp2626-12-s|hewlett-packard 2626 11 lines plus status,
lines#11, use=hp2626-s,
#
# hp2627 color tubes from University of Wisconsin
#
hp2627a-rev|hp 2627 with reverse video colors,
cr=^M, cud1=^J, ht=^I, ind=^J,
is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r,
kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
smul=\E&dD\E&v1S, use=hp2621-nl,
hp2627a|hp 2627 color terminal with no labels,
cr=^M, cud1=^J, ht=^I, ind=^J,
is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
use=hp2621-nl,
hp2627c|hp 2627 color (cyan) terminal with no labels,
cr=^M, cud1=^J, ht=^I, ind=^J,
is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a,
# hp2640a doesn't have the Y cursor addressing feature, and C is
# memory relative instead of screen relative, as we need.
#
hp2640a|hp 2640a,
cup@, rmkx@, smkx@, use=hp2645,
hp2640b|hp2644a|hp 264x series,
rmkx@, smkx@, use=hp2645,
# (hp2641a: removed unknown :gu: -- esr)
hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
am, da, db, mir, xhp,
cols#80, lines#24,
bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
if=/usr/share/tabset/std, il1=\EL, ind=^J,
is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
vpa=\E&a%p1%2dY,
# This terminal should be used at 4800 baud or less. It needs padding for
# plain characters at 9600, I guessed at an appropriate cr delay. It really
# wants ^E/^F handshaking, but that doesn't work well even if you write
# software to support it.
hp2645|hp45|HP 2645 series,
pb#9600,
blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
rmkx=\E&s0A,
sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
# You should use this terminal at 4800 baud or less.
hp2648|hp2648a|HP 2648a graphics terminal,
clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
dch1=\EP$<7>, ip=$<5>, use=hp2645,
# The HP 150 terminal is a fairly vanilla HP terminal, with the
# clreol standout problem. It also has graphics capabilities and
# a touch screen, which we don't describe here.
hp150|hewlett packard Model 150,
OTbs, use=hp2622,
# HP 2382a terminals, "the little ones." They don't have any
# alternate character set support and sending out ^N/^O will
# leave the screen blank.
hp2382a|hp2382|hewlett packard 2382a,
da, db,
lh#1, lm#48,
acsc@,
pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
rmacs@,
sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c,
sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
hp2621-a|hp2621a-a|hp2621 with fn as arrows,
use=hp+pfk+arrows, use=hp2621-fl,
# newer hewlett packard terminals
newhpkeyboard|generic entry for HP extended keyboard,
kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
use=hp+pfk-cr,
newhp|generic entry for new hewlett packard terminals,
am, bw, mir, xhp, xon,
cols#80, lines#24, pb#4800,
acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x.,
bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
tbc=\E3, use=newhpkeyboard,
memhp|memory relative addressing for new HP ttys,
vt#6,
clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
scrhp|screen relative addressing for new HP ttys,
clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
# (hp+labels: added label values from a BRL termcap -- esr)
hp+labels|"standard" label info for new HP ttys,
lh#2, lw#8, nlab#8,
lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
rmln=\E&j@, smln=\E&jB,
hp+printer|"standard" printer info for HP ttys,
ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
# The new hp2621b is kind of a cross between the old 2621 and the
# new 262x series of machines. It has dip-switched options.
# The firmware has a bug in it such that if you give it a null
# length label, the following character is eaten!
hp2621b|hp 2621b with old style keyboard,
lh#1, lm#48, lw#8, nlab#8,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
kind=\ET, kll=\EF, kri=\ES,
pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r,
smln=\E&jB, use=hp2621,
hp2621b-p|hp 2621b with printer,
use=hp+printer, use=hp2621b,
# hp2621b - new 2621b with new extended keyboard
# these are closer to the new 26xx series than the other 2621b
hp2621b-kx|hp 2621b with extended keyboard,
use=newhpkeyboard, use=hp2621b,
hp2621b-kx-p|hp 2621b with new keyboard & printer,
use=hp+printer, use=hp2621b-kx,
# Some assumptions are made in the following entries.
# These settings are NOT set up by the initialization strings.
#
# Port Configuration
# RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
#
# Terminal Configuration
# InhHndShk(G)=Yes InhDC2(H)=Yes
# XmitFnctn(A)=No InhEolWrp=No
#
#
# Hp 2622a & hp2623a display and graphics terminals
#
hp2622|hp2622a|hp 2622,
da, db,
lm#0, pb#19200,
is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
# The 2623 is a 2622 with extra graphics hardware.
hp2623|hp2623a|hp 2623,
use=hp2622,
hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
use=hp+printer, use=hp2624,
# The hewlett packard B can have an optional extra 6 pages of memory.
hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
lm#240, use=hp2624,
hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
lm#240, use=hp2624b-p,
# Color manipulations for HP terminals
hp+color|hp with colors,
ccc,
colors#16, ncv#17, pairs#7,
initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI,
oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
op=\E&v0S, scp=\E&v%p1%dS,
# sets the screen to be 80 columns wide
hp2397a|hp2397|hewlett packard 2397A color terminal,
is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
# HP 700/44 Setup parameters:
# Terminal Mode HP-PCterm
# Inhibit Auto Wrap NO
# Status Line Host Writable
# PC Character Set YES
# Twenty-Five Line Mode YES
# XON/XOFF @128 or 64 (sc)
# Keycode Mode NO or YES (sc)
# Backspace Key BS or BS/DEL
#
# sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
# \E\\? does not turn off keycode mode
# sets alternate start/stop; keycode on
hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
am, eo, xenl, xon,
cols#80, lines#25,
acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
ind=^J,
is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
kpp=\E[5~, rmam=\E[?7l,
rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
smul=\E[4m, xoffc=g, xonc=e,
#
# (hp2392: copied here from hpex -- esr)
hp2392|239x series,
cols#80,
cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
use=hpsub,
hpsub|hp terminals -- capability subset,
am, da, db, mir, xhp, xon,
lines#24,
bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
# hpex:
# May be used for most 24 x 80 hp terminals,
# but has no padding added, so may allow runover in some terminals at high
# baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
# hp98x5 terminal emulators or hp98x6 consoles.
# Adds xy-cursor addressing, vertical cursor addressing, home,
# last line, and underline capabilities.
#
# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
# moved here from hpsub -- esr)
hpex|hp extended capabilites,
cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
# From: Ville Sulko , 05 Aug 1996
hp2|hpex2|hewlett-packard extended capabilities newer version,
am, da, db, mir, xhp,
cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
# HP 236 console
# From:
hp236|hp236 internal terminal emulator,
OTbs, am,
cols#80, lines#24,
clear=\EF, cnorm=\EDE, cub1=^H,
cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
sgr0=\ECI, smso=\EBI,
# This works on a hp300 console running Utah 4.3 BSD
# From: Craig Leres
hp300h|HP Catseye console,
OTbs, am, da, db, mir, xhp,
cols#128, lines#51, lm#0, xmc#0,
bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
vpa=\E&a%p1%dY,
# From: Greg Couch
hp9837|hp98720|hp98721|HP 9000/300 workstations,
OTbs, am, da, db, mir, xhp,
cols#128, it#8, lines#46, lm#0,
bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
tbc=\E3, vpa=\E&a%p1%dY,
# HP 9845 desktop computer from BRL
# (hp9845: removed unknown capability :gu: -- esr)
hp9845|HP 9845,
OTbs, am, da, db, eo, mir, xhp,
cols#80, lines#21,
OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
# From: Charles A. Finnell of MITRE , developed 07SEP90
# (hp98550: replaced /usr/share/tabset/9837 with std because ,;
# added empty to avoid warnings re / --esr)
hp98550|hp98550a|HP 9000 Series 300 color console,
OTbs, am, da, db, mir, xhp,
cols#128, it#8, lines#49, lm#0,
acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
# From: Victor Duchovni
# (hp700-wy: removed obsolete ":nl=^J:";
# replaced /usr/share/tabset/hp700-wy with std because , -- esr)
hp700-wy|HP700/41 emulating wyse30,
OTbs, am, bw, mir, msgr,
cols#80, it#8, lines#24, xmc#1,
cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
hp70092|hp70092a|hp70092A|HP 700/92,
am, da, db, xhp,
cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H,
cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
bobcat|sbobcat|HP 9000 model 300 console,
am, da, db, mir, xhp,
cols#128, it#8, lines#47, xmc#0,
cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER,
rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
gator-t|HP 9000 model 237 emulating extra-tall AAA,
lines#94, use=gator,
gator|HP 9000 model 237 emulating AAA,
bw, km, mir, ul,
cols#128, it#8, lines#47,
bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
gator-52|HP 9000 model 237 emulating VT52,
cols#128, lines#47, use=vt52,
gator-52t|HP 9000 model 237 emulating extra-tall VT52,
lines#94, use=gator-52,
#### Honeywell-Bull
#
# From: Michael Haardt 11 Jan 93
#
# Honeywell Bull terminal. Its cursor and function keys send single
# control characters and it has standout/underline glitch. Most programs
# do not like these features/bugs. Visual bell is realized by flashing the
# "keyboard locked" LED.
dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
cols#80, lines#25,
clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
dku7003|Honeywell Bull DKU 7003 all features described,
msgr,
xmc#1,
blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
use=dku7003-dumb,
#### Lear-Siegler (adm)
#
# These guys are long since out of the terminals business, but
# in 1995 many current terminals still have an adm type as one of their
# emulations (usually their stupidest, and usually labeled adm3, though
# these `adm3' emulations normally have adm3a+ capabilities).
#
# WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
# `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
# was being held to ground would trigger a send of the top line on the screen.
# A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
# hanging in the air. (Thanks to Eric Fischer, ,
# for clearing up this point.)
adm1a|adm1|lsi adm1a,
am,
cols#80, lines#24,
bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
ind=^J,
adm2|lsi adm2,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
# (adm3: removed obsolete ":ma=^K^P:" -- esr)
adm3|lsi adm3,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
# The following ADM-3A switch settings are assumed for normal operation:
# SPACE U/L_DISP CLR_SCRN 24_LINE
# CUR_CTL LC_EN AUTO_NL FDX
# Other switches may be set for operator convenience or communication
# requirements. I recommend
# DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
# ETX_OFF EOT_OFF
# Most of these terminals required an option ROM to support lower case display.
# Open the case and look at the motherboard; if you see an open 24-pin DIP
# socket, you may be out of luck.
#
# (adm3a: some capabilities merged in from BRl entry -- esr)
adm3a|lsi adm3a,
OTbs, am,
cols#80, lines#24,
OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H,
cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L,
kcuu1=^K, rs2=^N,
adm3a+|adm3a plus,
kbs=^H, use=adm3a,
# (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
adm5|lsi adm5,
xmc#1,
bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
rmso=\EG, smso=\EG, use=adm3a+,
# A lot of terminals other than adm11s use these. Wherever you see
# use=adm+sgr with some of its capabilities disabled, try the
# disabled ones. They may well work but not have been documented or
# expressed in the using entry. We'd like to cook up an but the
# / sequences of the using entries vary too much.
adm+sgr|adm style highlight capabilities,
invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
smso=\EG4, smul=\EG8,
# LSI ADM-11 from George William Hartwig, Jr. via BRL
# Status line additions from Stephen J. Muir
# from . could also
# be ^Z, according to his entry.
# (adm11: =\EG4 was obviously erroneous because it also said
# =\EG4. Looking at other ADMs confirms this -- esr)
adm11|LSI ADM-11,
OTbs, am, hs,
OTkn#8, cols#80, lines#24,
OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H,
cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
use=adm+sgr,
# From: Andrew Scott Beals
# Corrected by Olaf Siebert , 11 May 1995
# Supervisor mode info by Ari Wuolle,