com.alibaba.rocketmq.shade.io.netty.channel.rxtx.RxtxChannelConfig Maven / Gradle / Ivy
/*
* Copyright 2013 The Netty Project
*
* The Netty Project licenses this file to you under the Apache License,
* version 2.0 (the "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*/
package io.netty.channel.rxtx;
import gnu.io.SerialPort;
import io.netty.buffer.ByteBufAllocator;
import io.netty.channel.ChannelConfig;
import io.netty.channel.MessageSizeEstimator;
import io.netty.channel.RecvByteBufAllocator;
/**
* A configuration class for RXTX device connections.
*
* Available options
*
* In addition to the options provided by {@link ChannelConfig},
* {@link DefaultRxtxChannelConfig} allows the following options in the option map:
*
*
*
* Name Associated setter method
*
* {@link RxtxChannelOption#BAUD_RATE} {@link #setBaudrate(int)}
*
* {@link RxtxChannelOption#DTR} {@link #setDtr(boolean)}
*
* {@link RxtxChannelOption#RTS} {@link #setRts(boolean)}
*
* {@link RxtxChannelOption#STOP_BITS} {@link #setStopbits(Stopbits)}
*
* {@link RxtxChannelOption#DATA_BITS} {@link #setDatabits(Databits)}
*
* {@link RxtxChannelOption#PARITY_BIT} {@link #setParitybit(Paritybit)}
*
* {@link RxtxChannelOption#WAIT_TIME} {@link #setWaitTimeMillis(int)}
*
*
*/
public interface RxtxChannelConfig extends ChannelConfig {
enum Stopbits {
/**
* 1 stop bit will be sent at the end of every character
*/
STOPBITS_1(SerialPort.STOPBITS_1),
/**
* 2 stop bits will be sent at the end of every character
*/
STOPBITS_2(SerialPort.STOPBITS_2),
/**
* 1.5 stop bits will be sent at the end of every character
*/
STOPBITS_1_5(SerialPort.STOPBITS_1_5);
private final int value;
Stopbits(int value) {
this.value = value;
}
public int value() {
return value;
}
public static Stopbits valueOf(int value) {
for (Stopbits stopbit : Stopbits.values()) {
if (stopbit.value == value) {
return stopbit;
}
}
throw new IllegalArgumentException("unknown " + Stopbits.class.getSimpleName() + " value: " + value);
}
}
enum Databits {
/**
* 5 data bits will be used for each character (ie. Baudot code)
*/
DATABITS_5(SerialPort.DATABITS_5),
/**
* 6 data bits will be used for each character
*/
DATABITS_6(SerialPort.DATABITS_6),
/**
* 7 data bits will be used for each character (ie. ASCII)
*/
DATABITS_7(SerialPort.DATABITS_7),
/**
* 8 data bits will be used for each character (ie. binary data)
*/
DATABITS_8(SerialPort.DATABITS_8);
private final int value;
Databits(int value) {
this.value = value;
}
public int value() {
return value;
}
public static Databits valueOf(int value) {
for (Databits databit : Databits.values()) {
if (databit.value == value) {
return databit;
}
}
throw new IllegalArgumentException("unknown " + Databits.class.getSimpleName() + " value: " + value);
}
}
enum Paritybit {
/**
* No parity bit will be sent with each data character at all
*/
NONE(SerialPort.PARITY_NONE),
/**
* An odd parity bit will be sent with each data character, ie. will be set
* to 1 if the data character contains an even number of bits set to 1.
*/
ODD(SerialPort.PARITY_ODD),
/**
* An even parity bit will be sent with each data character, ie. will be set
* to 1 if the data character contains an odd number of bits set to 1.
*/
EVEN(SerialPort.PARITY_EVEN),
/**
* A mark parity bit (ie. always 1) will be sent with each data character
*/
MARK(SerialPort.PARITY_MARK),
/**
* A space parity bit (ie. always 0) will be sent with each data character
*/
SPACE(SerialPort.PARITY_SPACE);
private final int value;
Paritybit(int value) {
this.value = value;
}
public int value() {
return value;
}
public static Paritybit valueOf(int value) {
for (Paritybit paritybit : Paritybit.values()) {
if (paritybit.value == value) {
return paritybit;
}
}
throw new IllegalArgumentException("unknown " + Paritybit.class.getSimpleName() + " value: " + value);
}
}
/**
* Sets the baud rate (ie. bits per second) for communication with the serial device.
* The baud rate will include bits for framing (in the form of stop bits and parity),
* such that the effective data rate will be lower than this value.
*
* @param baudrate The baud rate (in bits per second)
*/
RxtxChannelConfig setBaudrate(int baudrate);
/**
* Sets the number of stop bits to include at the end of every character to aid the
* serial device in synchronising with the data.
*
* @param stopbits The number of stop bits to use
*/
RxtxChannelConfig setStopbits(Stopbits stopbits);
/**
* Sets the number of data bits to use to make up each character sent to the serial
* device.
*
* @param databits The number of data bits to use
*/
RxtxChannelConfig setDatabits(Databits databits);
/**
* Sets the type of parity bit to be used when communicating with the serial device.
*
* @param paritybit The type of parity bit to be used
*/
RxtxChannelConfig setParitybit(Paritybit paritybit);
/**
* @return The configured baud rate, defaulting to 115200 if unset
*/
int getBaudrate();
/**
* @return The configured stop bits, defaulting to {@link Stopbits#STOPBITS_1} if unset
*/
Stopbits getStopbits();
/**
* @return The configured data bits, defaulting to {@link Databits#DATABITS_8} if unset
*/
Databits getDatabits();
/**
* @return The configured parity bit, defaulting to {@link Paritybit#NONE} if unset
*/
Paritybit getParitybit();
/**
* @return true if the serial device should support the Data Terminal Ready signal
*/
boolean isDtr();
/**
* Sets whether the serial device supports the Data Terminal Ready signal, used for
* flow control
*
* @param dtr true if DTR is supported, false otherwise
*/
RxtxChannelConfig setDtr(boolean dtr);
/**
* @return true if the serial device should support the Ready to Send signal
*/
boolean isRts();
/**
* Sets whether the serial device supports the Request To Send signal, used for flow
* control
*
* @param rts true if RTS is supported, false otherwise
*/
RxtxChannelConfig setRts(boolean rts);
/**
* @return The number of milliseconds to wait between opening the serial port and
* initialising.
*/
int getWaitTimeMillis();
/**
* Sets the time to wait after opening the serial port and before sending it any
* configuration information or data. A value of 0 indicates that no waiting should
* occur.
*
* @param waitTimeMillis The number of milliseconds to wait, defaulting to 0 (no
* wait) if unset
* @throws IllegalArgumentException if the supplied value is < 0
*/
RxtxChannelConfig setWaitTimeMillis(int waitTimeMillis);
/**
* Sets the maximal time (in ms) to block while try to read from the serial port. Default is 1000ms
*/
RxtxChannelConfig setReadTimeout(int readTimout);
/**
* Return the maximal time (in ms) to block and wait for something to be ready to read.
*/
int getReadTimeout();
@Override
RxtxChannelConfig setConnectTimeoutMillis(int connectTimeoutMillis);
@Override
RxtxChannelConfig setMaxMessagesPerRead(int maxMessagesPerRead);
@Override
RxtxChannelConfig setWriteSpinCount(int writeSpinCount);
@Override
RxtxChannelConfig setAllocator(ByteBufAllocator allocator);
@Override
RxtxChannelConfig setRecvByteBufAllocator(RecvByteBufAllocator allocator);
@Override
RxtxChannelConfig setAutoRead(boolean autoRead);
@Override
RxtxChannelConfig setAutoClose(boolean autoClose);
@Override
RxtxChannelConfig setWriteBufferHighWaterMark(int writeBufferHighWaterMark);
@Override
RxtxChannelConfig setWriteBufferLowWaterMark(int writeBufferLowWaterMark);
@Override
RxtxChannelConfig setMessageSizeEstimator(MessageSizeEstimator estimator);
}