com.alipay.api.java_websocket.framing.CloseFrame Maven / Gradle / Ivy
/*
* Copyright (c) 2010-2018 Nathan Rajlich
*
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
package com.alipay.api.java_websocket.framing;
import com.alipay.api.java_websocket.enums.Opcode;
import com.alipay.api.java_websocket.exceptions.InvalidDataException;
import com.alipay.api.java_websocket.exceptions.InvalidFrameException;
import com.alipay.api.java_websocket.util.ByteBufferUtils;
import com.alipay.api.java_websocket.util.Charsetfunctions;
import java.nio.ByteBuffer;
/**
* Class to represent a close frame
*/
public class CloseFrame extends ControlFrame {
/**
* indicates a normal closure, meaning whatever purpose the connection was established for has been fulfilled.
*/
public static final int NORMAL = 1000;
/**
* 1001 indicates that an endpoint is "going away", such as a server going down, or a browser having navigated away from a page.
*/
public static final int GOING_AWAY = 1001;
/**
* 1002 indicates that an endpoint is terminating the connection due to a protocol error.
*/
public static final int PROTOCOL_ERROR = 1002;
/**
* 1003 indicates that an endpoint is terminating the connection because it has received a type of data it cannot accept (e.g. an
* endpoint that understands only text data MAY send this if it receives a binary message).
*/
public static final int REFUSE = 1003;
/*1004: Reserved. The specific meaning might be defined in the future.*/
/**
* 1005 is a reserved value and MUST NOT be set as a status code in a Close control frame by an endpoint. It is designated for use in
* applications expecting a status code to indicate that no status code was actually present.
*/
public static final int NOCODE = 1005;
/**
* 1006 is a reserved value and MUST NOT be set as a status code in a Close control frame by an endpoint. It is designated for use in
* applications expecting a status code to indicate that the connection was closed abnormally, e.g. without sending or receiving a Close
* control frame.
*/
public static final int ABNORMAL_CLOSE = 1006;
/**
* 1007 indicates that an endpoint is terminating the connection because it has received data within a message that was not consistent
* with the type of the message (e.g., non-UTF-8 [RFC3629] data within a text message).
*/
public static final int NO_UTF8 = 1007;
/**
* 1008 indicates that an endpoint is terminating the connection because it has received a message that violates its policy. This is a
* generic status code that can be returned when there is no other more suitable status code (e.g. 1003 or 1009), or if there is a need
* to hide specific details about the policy.
*/
public static final int POLICY_VALIDATION = 1008;
/**
* 1009 indicates that an endpoint is terminating the connection because it has received a message which is too big for it to process.
*/
public static final int TOOBIG = 1009;
/**
* 1010 indicates that an endpoint (client) is terminating the connection because it has expected the server to negotiate one or more
* extension, but the server didn't return them in the response message of the WebSocket handshake. The list of extensions which are
* needed SHOULD appear in the /reason/ part of the Close frame. Note that this status code is not used by the server, because it can
* fail the WebSocket handshake instead.
*/
public static final int EXTENSION = 1010;
/**
* 1011 indicates that a server is terminating the connection because it encountered an unexpected condition that prevented it from
* fulfilling the request.
**/
public static final int UNEXPECTED_CONDITION = 1011;
/**
* 1012 indicates that the service is restarted. A client may reconnect, and if it choses to do, should reconnect using a randomized
* delay of 5 - 30s. See https://www.ietf.org/mail-archive/web/hybi/current/msg09670.html for more information.
*
* @since 1.3.8
**/
public static final int SERVICE_RESTART = 1012;
/**
* 1013 indicates that the service is experiencing overload. A client should only connect to a different IP (when there are multiple for
* the target) or reconnect to the same IP upon user action. See https://www.ietf.org/mail-archive/web/hybi/current/msg09670.html for
* more information.
*
* @since 1.3.8
**/
public static final int TRY_AGAIN_LATER = 1013;
/**
* 1014 indicates that the server was acting as a gateway or proxy and received an invalid response from the upstream server. This is
* similar to 502 HTTP Status Code See https://www.ietf.org/mail-archive/web/hybi/current/msg10748.html fore more information.
*
* @since 1.3.8
**/
public static final int BAD_GATEWAY = 1014;
/**
* 1015 is a reserved value and MUST NOT be set as a status code in a Close control frame by an endpoint. It is designated for use in
* applications expecting a status code to indicate that the connection was closed due to a failure to perform a TLS handshake (e.g.,
* the server certificate can't be verified).
**/
public static final int TLS_ERROR = 1015;
/**
* The connection had never been established
*/
public static final int NEVER_CONNECTED = -1;
/**
* The connection had a buggy close (this should not happen)
*/
public static final int BUGGYCLOSE = -2;
/**
* The connection was flushed and closed
*/
public static final int FLASHPOLICY = -3;
/**
* The close code used in this close frame
*/
private int code;
/**
* The close message used in this close frame
*/
private String reason;
/**
* Constructor for a close frame
*
* Using opcode closing and fin = true
*/
public CloseFrame() {
super(Opcode.CLOSING);
setReason("");
setCode(CloseFrame.NORMAL);
}
/**
* Set the close code for this close frame
*
* @param code the close code
*/
public void setCode(int code) {
this.code = code;
// CloseFrame.TLS_ERROR is not allowed to be transfered over the wire
if (code == CloseFrame.TLS_ERROR) {
this.code = CloseFrame.NOCODE;
this.reason = "";
}
updatePayload();
}
/**
* Set the close reason for this close frame
*
* @param reason the reason code
*/
public void setReason(String reason) {
if (reason == null) {
reason = "";
}
this.reason = reason;
updatePayload();
}
/**
* Get the used close code
*
* @return the used close code
*/
public int getCloseCode() {
return code;
}
/**
* Get the message that closeframe is containing
*
* @return the message in this frame
*/
public String getMessage() {
return reason;
}
public String toString() {
return super.toString() + "code: " + code;
}
public void isValid() throws InvalidDataException {
super.isValid();
if (code == CloseFrame.NO_UTF8 && reason.isEmpty()) {
throw new InvalidDataException(CloseFrame.NO_UTF8, "Received text is no valid utf8 string!");
}
if (code == CloseFrame.NOCODE && 0 < reason.length()) {
throw new InvalidDataException(PROTOCOL_ERROR, "A close frame must have a closecode if it has a reason");
}
//Intentional check for code != CloseFrame.TLS_ERROR just to make sure even if the code earlier changes
if ((code > CloseFrame.TLS_ERROR && code < 3000)) {
throw new InvalidDataException(PROTOCOL_ERROR, "Trying to send an illegal close code!");
}
if (code == CloseFrame.ABNORMAL_CLOSE || code == CloseFrame.TLS_ERROR || code == CloseFrame.NOCODE || code > 4999 || code < 1000
|| code == 1004) {
throw new InvalidFrameException("closecode must not be sent over the wire: " + code);
}
}
public void setPayload(ByteBuffer payload) {
code = CloseFrame.NOCODE;
reason = "";
payload.mark();
if (payload.remaining() == 0) {
code = CloseFrame.NORMAL;
} else if (payload.remaining() == 1) {
code = CloseFrame.PROTOCOL_ERROR;
} else {
if (payload.remaining() >= 2) {
ByteBuffer bb = ByteBuffer.allocate(4);
bb.position(2);
bb.putShort(payload.getShort());
bb.position(0);
code = bb.getInt();
}
payload.reset();
try {
int mark = payload.position();// because stringUtf8 also creates a mark
try {
payload.position(payload.position() + 2);
reason = Charsetfunctions.stringUtf8(payload);
} catch (IllegalArgumentException e) {
throw new InvalidDataException(CloseFrame.NO_UTF8);
} finally {
payload.position(mark);
}
} catch (InvalidDataException e) {
code = CloseFrame.NO_UTF8;
reason = null;
}
}
}
/**
* Update the payload to represent the close code and the reason
*/
private void updatePayload() {
byte[] by = Charsetfunctions.utf8Bytes(reason);
ByteBuffer buf = ByteBuffer.allocate(4);
buf.putInt(code);
buf.position(2);
ByteBuffer pay = ByteBuffer.allocate(2 + by.length);
pay.put(buf);
pay.put(by);
pay.rewind();
super.setPayload(pay);
}
public ByteBuffer getPayloadData() {
if (code == NOCODE) { return ByteBufferUtils.getEmptyByteBuffer(); }
return super.getPayloadData();
}
}