com.amazonaws.services.ec2.AmazonEC2 Maven / Gradle / Ivy
Show all versions of aws-android-sdk-mobileanalytics Show documentation
/*
* Copyright 2010-2014 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License").
* You may not use this file except in compliance with the License.
* A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
* express or implied. See the License for the specific language governing
* permissions and limitations under the License.
*/
package com.amazonaws.services.ec2;
import com.amazonaws.*;
import com.amazonaws.regions.*;
import com.amazonaws.services.ec2.model.*;
/**
* Interface for accessing AmazonEC2.
* Amazon Elastic Compute Cloud
* Amazon Elastic Compute Cloud (Amazon EC2) provides resizable computing
* capacity in the Amazon Web Services (AWS) cloud. Using Amazon EC2
* eliminates your need to invest in hardware up front, so you can
* develop and deploy applications faster.
*
*/
public interface AmazonEC2 {
/**
* Overrides the default endpoint for this client ("https://ec2.us-east-1.amazonaws.com").
* Callers can use this method to control which AWS region they want to work with.
*
* Callers can pass in just the endpoint (ex: "ec2.us-east-1.amazonaws.com") or a full
* URL, including the protocol (ex: "https://ec2.us-east-1.amazonaws.com"). If the
* protocol is not specified here, the default protocol from this client's
* {@link ClientConfiguration} will be used, which by default is HTTPS.
*
* For more information on using AWS regions with the AWS SDK for Java, and
* a complete list of all available endpoints for all AWS services, see:
*
* http://developer.amazonwebservices.com/connect/entry.jspa?externalID=3912
*
* This method is not threadsafe. An endpoint should be configured when the
* client is created and before any service requests are made. Changing it
* afterwards creates inevitable race conditions for any service requests in
* transit or retrying.
*
* @param endpoint
* The endpoint (ex: "ec2.us-east-1.amazonaws.com") or a full URL,
* including the protocol (ex: "https://ec2.us-east-1.amazonaws.com") of
* the region specific AWS endpoint this client will communicate
* with.
*
* @throws IllegalArgumentException
* If any problems are detected with the specified endpoint.
*/
public void setEndpoint(String endpoint) throws java.lang.IllegalArgumentException;
/**
* An alternative to {@link AmazonEC2#setEndpoint(String)}, sets the
* regional endpoint for this client's service calls. Callers can use this
* method to control which AWS region they want to work with.
*
* By default, all service endpoints in all regions use the https protocol.
* To use http instead, specify it in the {@link ClientConfiguration}
* supplied at construction.
*
* This method is not threadsafe. A region should be configured when the
* client is created and before any service requests are made. Changing it
* afterwards creates inevitable race conditions for any service requests in
* transit or retrying.
*
* @param region
* The region this client will communicate with. See
* {@link com.amazonaws.regions.Region#getRegion(com.amazonaws.regions.Regions)} for
* accessing a given region.
* @throws java.lang.IllegalArgumentException
* If the given region is null, or if this service isn't
* available in the given region. See
* {@link com.amazonaws.regions.Region#isServiceSupported(String)}
* @see Region#getRegion(com.amazonaws.regions.Regions)
* @see Region#createClient(Class, com.amazonaws.auth.AWSCredentialsProvider, ClientConfiguration)
*/
public void setRegion(com.amazonaws.regions.Region region) throws java.lang.IllegalArgumentException;
/**
*
* Requests a reboot of one or more instances. This operation is
* asynchronous; it only queues a request to reboot the specified
* instances. The operation succeeds if the instances are valid and
* belong to you. Requests to reboot terminated instances are ignored.
*
*
* If a Linux/Unix instance does not cleanly shut down within four
* minutes, Amazon EC2 performs a hard reboot.
*
*
* For more information about troubleshooting, see
* Getting Console Output and Rebooting Instances
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param rebootInstancesRequest Container for the necessary parameters
* to execute the RebootInstances service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void rebootInstances(RebootInstancesRequest rebootInstancesRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of the Reserved Instances that you purchased.
*
*
* For more information about Reserved Instances, see
* Reserved Instances
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param describeReservedInstancesRequest Container for the necessary
* parameters to execute the DescribeReservedInstances service method on
* AmazonEC2.
*
* @return The response from the DescribeReservedInstances service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeReservedInstancesResult describeReservedInstances(DescribeReservedInstancesRequest describeReservedInstancesRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of the Availability Zones that are available to
* you. The results include zones only for the region you're currently
* using. If there is an event impacting an Availability Zone, you can
* use this request to view the state and any provided message for that
* Availability Zone.
*
*
* For more information, see
* Regions and Availability Zones
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param describeAvailabilityZonesRequest Container for the necessary
* parameters to execute the DescribeAvailabilityZones service method on
* AmazonEC2.
*
* @return The response from the DescribeAvailabilityZones service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeAvailabilityZonesResult describeAvailabilityZones(DescribeAvailabilityZonesRequest describeAvailabilityZonesRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Detaches an Amazon EBS volume from an instance. Make sure to unmount
* any file systems on the device within your operating system before
* detaching the volume. Failure to do so results in the volume being
* stuck in a busy state while detaching.
*
*
* If an Amazon EBS volume is the root device of an instance, it can't
* be detached while the instance is running. To detach the root volume,
* stop the instance first.
*
*
* If the root volume is detached from an instance with an AWS
* Marketplace product code, then the AWS Marketplace product codes from
* that volume are no longer associated with the instance.
*
*
* For more information, see
* Detaching an Amazon EBS Volume
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param detachVolumeRequest Container for the necessary parameters to
* execute the DetachVolume service method on AmazonEC2.
*
* @return The response from the DetachVolume service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DetachVolumeResult detachVolume(DetachVolumeRequest detachVolumeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes the specified key pair, by removing the public key from
* Amazon EC2.
*
*
* @param deleteKeyPairRequest Container for the necessary parameters to
* execute the DeleteKeyPair service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteKeyPair(DeleteKeyPairRequest deleteKeyPairRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Disables monitoring for a running instance. For more information
* about monitoring instances, see
* Monitoring Your Instances and Volumes
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param unmonitorInstancesRequest Container for the necessary
* parameters to execute the UnmonitorInstances service method on
* AmazonEC2.
*
* @return The response from the UnmonitorInstances service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public UnmonitorInstancesResult unmonitorInstances(UnmonitorInstancesRequest unmonitorInstancesRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Attaches a virtual private gateway to a VPC. For more information,
* see
* Adding a Hardware Virtual Private Gateway to Your VPC
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param attachVpnGatewayRequest Container for the necessary parameters
* to execute the AttachVpnGateway service method on AmazonEC2.
*
* @return The response from the AttachVpnGateway service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public AttachVpnGatewayResult attachVpnGateway(AttachVpnGatewayRequest attachVpnGatewayRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates an Amazon EBS-backed AMI from an Amazon EBS-backed instance
* that is either running or stopped.
*
*
* If you customized your instance with instance store volumes or EBS
* volumes in addition to the root device volume, the new AMI contains
* block device mapping information for those volumes. When you launch an
* instance from this new AMI, the instance automatically launches with
* those additional volumes.
*
*
* For more information, see
* Creating Amazon EBS-Backed Linux AMIs
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param createImageRequest Container for the necessary parameters to
* execute the CreateImage service method on AmazonEC2.
*
* @return The response from the CreateImage service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateImageResult createImage(CreateImageRequest createImageRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes a security group.
*
*
* If you attempt to delete a security group that is associated with an
* instance, or is referenced by another security group, the operation
* fails with InvalidGroup.InUse in EC2-Classic or
* DependencyViolation in EC2-VPC.
*
*
* @param deleteSecurityGroupRequest Container for the necessary
* parameters to execute the DeleteSecurityGroup service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteSecurityGroup(DeleteSecurityGroupRequest deleteSecurityGroupRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Exports a running or stopped instance to an Amazon S3 bucket.
*
*
* For information about the supported operating systems, image formats,
* and known limitations for the types of instances you can export, see
* Exporting EC2 Instances
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param createInstanceExportTaskRequest Container for the necessary
* parameters to execute the CreateInstanceExportTask service method on
* AmazonEC2.
*
* @return The response from the CreateInstanceExportTask service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateInstanceExportTaskResult createInstanceExportTask(CreateInstanceExportTaskRequest createInstanceExportTaskRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Retrieves the encrypted administrator password for an instance
* running Windows.
*
*
* The Windows password is only generated the first time an AMI is
* launched. It is not generated for rebundled AMIs or after the password
* is changed on an instance.
*
*
* The password is encrypted using the key pair that you specified when
* you launched the instance. You must provide the corresponding key pair
* file.
*
*
* Password generation and encryption takes a few moments. We recommend
* that you wait up to 15 minutes after launching an instance before
* trying to retrieve the generated password.
*
*
* @param getPasswordDataRequest Container for the necessary parameters
* to execute the GetPasswordData service method on AmazonEC2.
*
* @return The response from the GetPasswordData service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public GetPasswordDataResult getPasswordData(GetPasswordDataRequest getPasswordDataRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Associates a set of DHCP options (that you've previously created)
* with the specified VPC, or associates no DHCP options with the VPC.
*
*
* After you associate the options with the VPC, any existing instances
* and all new instances that you launch in that VPC use the options. You
* don't need to restart or relaunch the instances. They automatically
* pick up the changes within a few hours, depending on how frequently
* the instance renews its DHCP lease. You can explicitly renew the lease
* using the operating system on the instance.
*
*
* For more information, see
* DHCP Options Sets
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param associateDhcpOptionsRequest Container for the necessary
* parameters to execute the AssociateDhcpOptions service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void associateDhcpOptions(AssociateDhcpOptionsRequest associateDhcpOptionsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Adds one or more egress rules to a security group for use with a VPC.
* Specifically, this action permits instances to send traffic to one or
* more CIDR IP address ranges, or to one or more security groups for the
* same VPC.
*
*
* IMPORTANT: You can have up to 50 rules per security group
* (covering both ingress and egress rules).
*
*
* A security group is for use with instances either in the EC2-Classic
* platform or in a specific VPC. This action doesn't apply to security
* groups for use in EC2-Classic. For more information, see
* Security Groups for Your VPC
* in the Amazon Virtual Private Cloud User Guide .
*
*
* Each rule consists of the protocol (for example, TCP), plus either a
* CIDR range or a source group. For the TCP and UDP protocols, you must
* also specify the destination port or port range. For the ICMP
* protocol, you must also specify the ICMP type and code. You can use -1
* for the type or code to mean all types or all codes.
*
*
* Rule changes are propagated to affected instances as quickly as
* possible. However, a small delay might occur.
*
*
* @param authorizeSecurityGroupEgressRequest Container for the necessary
* parameters to execute the AuthorizeSecurityGroupEgress service method
* on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void authorizeSecurityGroupEgress(AuthorizeSecurityGroupEgressRequest authorizeSecurityGroupEgressRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Stops an Amazon EBS-backed instance. Each time you transition an
* instance from stopped to started, Amazon EC2 charges a full instance
* hour, even if transitions happen multiple times within a single hour.
*
*
* You can't start or stop Spot Instances.
*
*
* Instances that use Amazon EBS volumes as their root devices can be
* quickly stopped and started. When an instance is stopped, the compute
* resources are released and you are not billed for hourly instance
* usage. However, your root partition Amazon EBS volume remains,
* continues to persist your data, and you are charged for Amazon EBS
* volume usage. You can restart your instance at any time.
*
*
* Before stopping an instance, make sure it is in a state from which it
* can be restarted. Stopping an instance does not preserve data stored
* in RAM.
*
*
* Performing this operation on an instance that uses an instance store
* as its root device returns an error.
*
*
* You can stop, start, and terminate EBS-backed instances. You can only
* terminate instance store-backed instances. What happens to an instance
* differs if you stop it or terminate it. For example, when you stop an
* instance, the root device and any other devices attached to the
* instance persist. When you terminate an instance, the root device and
* any other devices attached during the instance launch are
* automatically deleted. For more information about the differences
* between stopping and terminating instances, see
* Instance Lifecycle
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* For more information about troubleshooting, see
* Troubleshooting Stopping Your Instance
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param stopInstancesRequest Container for the necessary parameters to
* execute the StopInstances service method on AmazonEC2.
*
* @return The response from the StopInstances service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public StopInstancesResult stopInstances(StopInstancesRequest stopInstancesRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Imports the public key from an RSA key pair that you created with a
* third-party tool. Compare this with CreateKeyPair, in which AWS
* creates the key pair and gives the keys to you (AWS keeps a copy of
* the public key). With ImportKeyPair, you create the key pair and give
* AWS just the public key. The private key is never transferred between
* you and AWS.
*
*
* For more information about key pairs, see
* Key Pairs
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param importKeyPairRequest Container for the necessary parameters to
* execute the ImportKeyPair service method on AmazonEC2.
*
* @return The response from the ImportKeyPair service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public ImportKeyPairResult importKeyPair(ImportKeyPairRequest importKeyPairRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes the specified network interface. You must detach the network
* interface before you can delete it.
*
*
* @param deleteNetworkInterfaceRequest Container for the necessary
* parameters to execute the DeleteNetworkInterface service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteNetworkInterface(DeleteNetworkInterfaceRequest deleteNetworkInterfaceRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Modifies the specified attribute of the specified VPC.
*
*
* @param modifyVpcAttributeRequest Container for the necessary
* parameters to execute the ModifyVpcAttribute service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void modifyVpcAttribute(ModifyVpcAttributeRequest modifyVpcAttributeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates a security group.
*
*
* A security group is for use with instances either in the EC2-Classic
* platform or in a specific VPC. For more information, see
* Amazon EC2 Security Groups in the Amazon Elastic Compute Cloud User Guide and Security Groups for Your VPC
* in the Amazon Virtual Private Cloud User Guide .
*
*
* IMPORTANT: EC2-Classic: You can have up to 500 security
* groups. EC2-VPC: You can create up to 100 security groups per VPC.
*
*
* When you create a security group, you specify a friendly name of your
* choice. You can have a security group for use in EC2-Classic with the
* same name as a security group for use in a VPC. However, you can't
* have two security groups for use in EC2-Classic with the same name or
* two security groups for use in a VPC with the same name.
*
*
* You have a default security group for use in EC2-Classic and a
* default security group for use in your VPC. If you don't specify a
* security group when you launch an instance, the instance is launched
* into the appropriate default security group. A default security group
* includes a default rule that grants instances unrestricted network
* access to each other.
*
*
* You can add or remove rules from your security groups using
* AuthorizeSecurityGroupIngress, AuthorizeSecurityGroupEgress,
* RevokeSecurityGroupIngress, and RevokeSecurityGroupEgress.
*
*
* @param createSecurityGroupRequest Container for the necessary
* parameters to execute the CreateSecurityGroup service method on
* AmazonEC2.
*
* @return The response from the CreateSecurityGroup service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateSecurityGroupResult createSecurityGroup(CreateSecurityGroupRequest createSecurityGroupRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the Spot Price history. Spot Instances are instances that
* Amazon EC2 starts on your behalf when the maximum price that you
* specify exceeds the current Spot Price. Amazon EC2 periodically sets
* the Spot Price based on available Spot Instance capacity and current
* Spot Instance requests. For more information about Spot Instances, see
* Spot Instances
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* When you specify an Availability Zone, this operation describes the
* price history for the specified Availability Zone with the most recent
* set of prices listed first. If you don't specify an Availability Zone,
* you get the prices across all Availability Zones, starting with the
* most recent set. However, if you're using an API version earlier than
* 2011-05-15, you get the lowest price across the region for the
* specified time period. The prices returned are listed in chronological
* order, from the oldest to the most recent.
*
*
* @param describeSpotPriceHistoryRequest Container for the necessary
* parameters to execute the DescribeSpotPriceHistory service method on
* AmazonEC2.
*
* @return The response from the DescribeSpotPriceHistory service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSpotPriceHistoryResult describeSpotPriceHistory(DescribeSpotPriceHistoryRequest describeSpotPriceHistoryRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your network interfaces.
*
*
* @param describeNetworkInterfacesRequest Container for the necessary
* parameters to execute the DescribeNetworkInterfaces service method on
* AmazonEC2.
*
* @return The response from the DescribeNetworkInterfaces service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeNetworkInterfacesResult describeNetworkInterfaces(DescribeNetworkInterfacesRequest describeNetworkInterfacesRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more regions that are currently available to you.
*
*
* For a list of the regions supported by Amazon EC2, see
* Regions and Endpoints
* .
*
*
* @param describeRegionsRequest Container for the necessary parameters
* to execute the DescribeRegions service method on AmazonEC2.
*
* @return The response from the DescribeRegions service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeRegionsResult describeRegions(DescribeRegionsRequest describeRegionsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates a listing for Amazon EC2 Reserved Instances to be sold in the
* Reserved Instance Marketplace. You can submit one Reserved Instance
* listing at a time.
*
*
* For more information, see
* Reserved Instance Marketplace
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param createReservedInstancesListingRequest Container for the
* necessary parameters to execute the CreateReservedInstancesListing
* service method on AmazonEC2.
*
* @return The response from the CreateReservedInstancesListing service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateReservedInstancesListingResult createReservedInstancesListing(CreateReservedInstancesListingRequest createReservedInstancesListingRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates a set of DHCP options for your VPC. After creating the set,
* you must associate it with the VPC, causing all existing and new
* instances that you launch in the VPC to use this set of DHCP options.
* The following are the individual DHCP options you can specify. For
* more information about the options, see
* RFC 2132
* .
*
*
*
* -
domain-name-servers - The IP addresses of up to
* four domain name servers, or AmazonProvidedDNS . The
* default DHCP option set specifies AmazonProvidedDNS . If
* specifying more than one domain name server, specify the IP addresses
* in a single parameter, separated by commas.
* -
domain-name - If you're using AmazonProvidedDNS in
* us-east-1 , specify ec2.internal . If you're
* using AmazonProvidedDNS in another region, specify
* region.compute.internal (for example,
* ap-northeast-1.compute.internal ). Otherwise, specify a
* domain name (for example, MyCompany.com ).
* -
ntp-servers - The IP addresses of up to four
* Network Time Protocol (NTP) servers.
* -
netbios-name-servers - The IP addresses of up to
* four NetBIOS name servers.
* -
netbios-node-type - The NetBIOS node type (1, 2, 4,
* or 8). We recommend that you specify 2 (broadcast and multicast are
* not currently supported). For more information about these node types,
* see
* RFC 2132
* .
*
*
*
* For more information about DHCP options, see
* DHCP Options Sets
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param createDhcpOptionsRequest Container for the necessary parameters
* to execute the CreateDhcpOptions service method on AmazonEC2.
*
* @return The response from the CreateDhcpOptions service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateDhcpOptionsResult createDhcpOptions(CreateDhcpOptionsRequest createDhcpOptionsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Resets permission settings for the specified snapshot.
*
*
* For more information on modifying snapshot permissions, see
* Sharing Snapshots
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param resetSnapshotAttributeRequest Container for the necessary
* parameters to execute the ResetSnapshotAttribute service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void resetSnapshotAttribute(ResetSnapshotAttributeRequest resetSnapshotAttributeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes the specified route from the specified route table.
*
*
* @param deleteRouteRequest Container for the necessary parameters to
* execute the DeleteRoute service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteRoute(DeleteRouteRequest deleteRouteRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your Internet gateways.
*
*
* @param describeInternetGatewaysRequest Container for the necessary
* parameters to execute the DescribeInternetGateways service method on
* AmazonEC2.
*
* @return The response from the DescribeInternetGateways service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeInternetGatewaysResult describeInternetGateways(DescribeInternetGatewaysRequest describeInternetGatewaysRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates an import volume task using metadata from the specified disk
* image. After importing the image, you then upload it using the
* ec2-import-volume command in the Amazon EC2 command-line interface
* (CLI) tools. For more information, see
* Using the Command Line Tools to Import Your Virtual Machine to Amazon EC2
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param importVolumeRequest Container for the necessary parameters to
* execute the ImportVolume service method on AmazonEC2.
*
* @return The response from the ImportVolume service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public ImportVolumeResult importVolume(ImportVolumeRequest importVolumeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your security groups.
*
*
* A security group is for use with instances either in the EC2-Classic
* platform or in a specific VPC. For more information, see
* Amazon EC2 Security Groups in the Amazon Elastic Compute Cloud User Guide and Security Groups for Your VPC
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param describeSecurityGroupsRequest Container for the necessary
* parameters to execute the DescribeSecurityGroups service method on
* AmazonEC2.
*
* @return The response from the DescribeSecurityGroups service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSecurityGroupsResult describeSecurityGroups(DescribeSecurityGroupsRequest describeSecurityGroupsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Rejects a VPC peering connection request. The VPC peering connection
* must be in the pending-acceptance state. Use the
* DescribeVpcPeeringConnections request to view your
* outstanding VPC peering connection requests.
*
*
* @param rejectVpcPeeringConnectionRequest Container for the necessary
* parameters to execute the RejectVpcPeeringConnection service method on
* AmazonEC2.
*
* @return The response from the RejectVpcPeeringConnection service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public RejectVpcPeeringConnectionResult rejectVpcPeeringConnection(RejectVpcPeeringConnectionRequest rejectVpcPeeringConnectionRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Detaches a virtual private gateway from a VPC. You do this if you're
* planning to turn off the VPC and not use it anymore. You can confirm a
* virtual private gateway has been completely detached from a VPC by
* describing the virtual private gateway (any attachments to the virtual
* private gateway are also described).
*
*
* You must wait for the attachment's state to switch to
* detached before you can delete the VPC or attach a
* different VPC to the virtual private gateway.
*
*
* @param detachVpnGatewayRequest Container for the necessary parameters
* to execute the DetachVpnGateway service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void detachVpnGateway(DetachVpnGatewayRequest detachVpnGatewayRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deregisters the specified AMI. After you deregister an AMI, it can't
* be used to launch new instances.
*
*
* This command does not delete the AMI.
*
*
* @param deregisterImageRequest Container for the necessary parameters
* to execute the DeregisterImage service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deregisterImage(DeregisterImageRequest deregisterImageRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the datafeed for Spot Instances. For more information, see
* Spot Instances
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param describeSpotDatafeedSubscriptionRequest Container for the
* necessary parameters to execute the DescribeSpotDatafeedSubscription
* service method on AmazonEC2.
*
* @return The response from the DescribeSpotDatafeedSubscription service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSpotDatafeedSubscriptionResult describeSpotDatafeedSubscription(DescribeSpotDatafeedSubscriptionRequest describeSpotDatafeedSubscriptionRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes the specified set of tags from the specified set of
* resources. This call is designed to follow a DescribeTags
* request.
*
*
* For more information about tags, see
* Tagging Your Resources
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param deleteTagsRequest Container for the necessary parameters to
* execute the DeleteTags service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteTags(DeleteTagsRequest deleteTagsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes the specified subnet. You must terminate all running
* instances in the subnet before you can delete the subnet.
*
*
* @param deleteSubnetRequest Container for the necessary parameters to
* execute the DeleteSubnet service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteSubnet(DeleteSubnetRequest deleteSubnetRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the specified attribute of your AWS account.
*
*
* @param describeAccountAttributesRequest Container for the necessary
* parameters to execute the DescribeAccountAttributes service method on
* AmazonEC2.
*
* @return The response from the DescribeAccountAttributes service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeAccountAttributesResult describeAccountAttributes(DescribeAccountAttributesRequest describeAccountAttributesRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates a virtual private gateway. A virtual private gateway is the
* endpoint on the VPC side of your VPN connection. You can create a
* virtual private gateway before creating the VPC itself.
*
*
* For more information about virtual private gateways, see
* Adding a Hardware Virtual Private Gateway to Your VPC
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param createVpnGatewayRequest Container for the necessary parameters
* to execute the CreateVpnGateway service method on AmazonEC2.
*
* @return The response from the CreateVpnGateway service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateVpnGatewayResult createVpnGateway(CreateVpnGatewayRequest createVpnGatewayRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Enables I/O operations for a volume that had I/O operations disabled
* because the data on the volume was potentially inconsistent.
*
*
* @param enableVolumeIORequest Container for the necessary parameters to
* execute the EnableVolumeIO service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void enableVolumeIO(EnableVolumeIORequest enableVolumeIORequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes the specified virtual private gateway. We recommend that
* before you delete a virtual private gateway, you detach it from the
* VPC and delete the VPN connection. Note that you don't need to delete
* the virtual private gateway if you plan to delete and recreate the VPN
* connection between your VPC and your network.
*
*
* @param deleteVpnGatewayRequest Container for the necessary parameters
* to execute the DeleteVpnGateway service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteVpnGateway(DeleteVpnGatewayRequest deleteVpnGatewayRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Attaches an Amazon EBS volume to a running or stopped instance and
* exposes it to the instance with the specified device name.
*
*
* Encrypted Amazon EBS volumes may only be attached to instances that
* support Amazon EBS encryption. For more information, see
* Amazon EBS Encryption
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* For a list of supported device names, see
* Attaching an Amazon EBS Volume to an Instance . Any device names that aren't reserved for instance store volumes can be used for Amazon EBS volumes. For more information, see Amazon EC2 Instance Store
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* If a volume has an AWS Marketplace product code:
*
*
*
* - The volume can only be attached as the root device of a stopped
* instance.
* - You must be subscribed to the AWS Marketplace code that is on the
* volume.
* - The configuration (instance type, operating system) of the
* instance must support that specific AWS Marketplace code. For example,
* you cannot take a volume from a Windows instance and attach it to a
* Linux instance.
* - AWS Marketplace product codes are copied from the volume to the
* instance.
*
*
*
* For an overview of the AWS Marketplace, see
* https://aws.amazon.com/marketplace/help/200900000 . For more information about how to use the AWS Marketplace, see AWS Marketplace
* .
*
*
* For more information about Amazon EBS volumes, see
* Attaching Amazon EBS Volumes
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param attachVolumeRequest Container for the necessary parameters to
* execute the AttachVolume service method on AmazonEC2.
*
* @return The response from the AttachVolume service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public AttachVolumeResult attachVolume(AttachVolumeRequest attachVolumeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the status of the specified volumes. Volume status provides
* the result of the checks performed on your volumes to determine events
* that can impair the performance of your volumes. The performance of a
* volume can be affected if an issue occurs on the volume's underlying
* host. If the volume's underlying host experiences a power outage or
* system issue, after the system is restored, there could be data
* inconsistencies on the volume. Volume events notify you if this
* occurs. Volume actions notify you if any action needs to be taken in
* response to the event.
*
*
* The DescribeVolumeStatus operation provides the
* following information about the specified volumes:
*
*
* Status : Reflects the current status of the volume. The
* possible values are ok , impaired ,
* warning , or insufficient-data . If all
* checks pass, the overall status of the volume is ok . If
* the check fails, the overall status is impaired . If the
* status is insufficient-data , then the checks may still
* be taking place on your volume at the time. We recommend that you
* retry the request. For more information on volume status, see
* Monitoring the Status of Your Volumes
* .
*
*
* Events : Reflect the cause of a volume status and may require
* you to take action. For example, if your volume returns an
* impaired status, then the volume event might be
* potential-data-inconsistency . This means that your
* volume has been affected by an issue with the underlying host, has all
* I/O operations disabled, and may have inconsistent data.
*
*
* Actions : Reflect the actions you may have to take in response
* to an event. For example, if the status of the volume is
* impaired and the volume event shows
* potential-data-inconsistency , then the action shows
* enable-volume-io . This means that you may want to enable
* the I/O operations for the volume by calling the EnableVolumeIO action
* and then check the volume for data consistency.
*
*
* NOTE: Volume status is based on the volume status checks, and
* does not reflect the volume state. Therefore, volume status does not
* indicate volumes in the error state (for example, when a volume is
* incapable of accepting I/O.)
*
*
* @param describeVolumeStatusRequest Container for the necessary
* parameters to execute the DescribeVolumeStatus service method on
* AmazonEC2.
*
* @return The response from the DescribeVolumeStatus service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVolumeStatusResult describeVolumeStatus(DescribeVolumeStatusRequest describeVolumeStatusRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Resets an attribute of an AMI to its default value.
*
*
* @param resetImageAttributeRequest Container for the necessary
* parameters to execute the ResetImageAttribute service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void resetImageAttribute(ResetImageAttributeRequest resetImageAttributeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your VPN connections.
*
*
* For more information about VPN connections, see
* Adding a Hardware Virtual Private Gateway to Your VPC
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param describeVpnConnectionsRequest Container for the necessary
* parameters to execute the DescribeVpnConnections service method on
* AmazonEC2.
*
* @return The response from the DescribeVpnConnections service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVpnConnectionsResult describeVpnConnections(DescribeVpnConnectionsRequest describeVpnConnectionsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Enables a virtual private gateway (VGW) to propagate routes to the
* routing tables of a VPC.
*
*
* @param enableVgwRoutePropagationRequest Container for the necessary
* parameters to execute the EnableVgwRoutePropagation service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void enableVgwRoutePropagation(EnableVgwRoutePropagationRequest enableVgwRoutePropagationRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates a snapshot of an Amazon EBS volume and stores it in Amazon
* S3. You can use snapshots for backups, to make copies of Amazon EBS
* volumes, and to save data before shutting down an instance.
*
*
* When a snapshot is created, any AWS Marketplace product codes that
* are associated with the source volume are propagated to the snapshot.
*
*
* You can take a snapshot of an attached volume that is in use.
* However, snapshots only capture data that has been written to your
* Amazon EBS volume at the time the snapshot command is issued; this may
* exclude any data that has been cached by any applications or the
* operating system. If you can pause any file writes to the volume long
* enough to take a snapshot, your snapshot should be complete. However,
* if you cannot pause all file writes to the volume, you should unmount
* the volume from within the instance, issue the snapshot command, and
* then remount the volume to ensure a consistent and complete snapshot.
* You may remount and use your volume while the snapshot status is
* pending .
*
*
* To create a snapshot for Amazon EBS volumes that serve as root
* devices, you should stop the instance before taking the snapshot.
*
*
* Snapshots that are taken from encrypted volumes are automatically
* encrypted. Volumes that are created from encrypted snapshots are also
* automatically encrypted. Your encrypted volumes and any associated
* snapshots always remain protected.
*
*
* For more information, see
* Amazon Elastic Block Store and Amazon EBS Encryption
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param createSnapshotRequest Container for the necessary parameters to
* execute the CreateSnapshot service method on AmazonEC2.
*
* @return The response from the CreateSnapshot service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateSnapshotResult createSnapshot(CreateSnapshotRequest createSnapshotRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes the specified Amazon EBS volume. The volume must be in the
* available state (not attached to an instance).
*
*
* NOTE: The volume may remain in the deleting state for several
* minutes.
*
*
* For more information, see
* Deleting an Amazon EBS Volume
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param deleteVolumeRequest Container for the necessary parameters to
* execute the DeleteVolume service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteVolume(DeleteVolumeRequest deleteVolumeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates a network interface in the specified subnet.
*
*
* For more information about network interfaces, see
* Elastic Network Interfaces
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param createNetworkInterfaceRequest Container for the necessary
* parameters to execute the CreateNetworkInterface service method on
* AmazonEC2.
*
* @return The response from the CreateNetworkInterface service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateNetworkInterfaceResult createNetworkInterface(CreateNetworkInterfaceRequest createNetworkInterfaceRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Modifies the Availability Zone, instance count, instance type, or
* network platform (EC2-Classic or EC2-VPC) of your Reserved Instances.
* The Reserved Instances to be modified must be identical, except for
* Availability Zone, network platform, and instance type.
*
*
* @param modifyReservedInstancesRequest Container for the necessary
* parameters to execute the ModifyReservedInstances service method on
* AmazonEC2.
*
* @return The response from the ModifyReservedInstances service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public ModifyReservedInstancesResult modifyReservedInstances(ModifyReservedInstancesRequest modifyReservedInstancesRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your VPCs.
*
*
* @param describeVpcsRequest Container for the necessary parameters to
* execute the DescribeVpcs service method on AmazonEC2.
*
* @return The response from the DescribeVpcs service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVpcsResult describeVpcs(DescribeVpcsRequest describeVpcsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Unassigns one or more secondary private IP addresses from a network
* interface.
*
*
* @param unassignPrivateIpAddressesRequest Container for the necessary
* parameters to execute the UnassignPrivateIpAddresses service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void unassignPrivateIpAddresses(UnassignPrivateIpAddressesRequest unassignPrivateIpAddressesRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Cancels an active conversion task. The task can be the import of an
* instance or volume. The action removes all artifacts of the
* conversion, including a partially uploaded volume or instance. If the
* conversion is complete or is in the process of transferring the final
* disk image, the command fails and returns an exception.
*
*
* For more information, see
* Using the Command Line Tools to Import Your Virtual Machine to Amazon EC2
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param cancelConversionTaskRequest Container for the necessary
* parameters to execute the CancelConversionTask service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void cancelConversionTask(CancelConversionTaskRequest cancelConversionTaskRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Associates an Elastic IP address with an instance or a network
* interface.
*
*
* An Elastic IP address is for use in either the EC2-Classic platform
* or in a VPC. For more information, see
* Elastic IP Addresses
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* [EC2-Classic, default VPC] If the Elastic IP address is already
* associated with a different instance, it is disassociated from that
* instance and associated with the specified instance.
*
*
* [EC2-VPC] If you don't specify a private IP address, the Elastic IP
* address is associated with the primary IP address. If the Elastic IP
* address is already associated with a different instance or a network
* interface, you get an error unless you allow reassociation.
*
*
* This is an idempotent operation. If you perform the operation more
* than once, Amazon EC2 doesn't return an error.
*
*
* @param associateAddressRequest Container for the necessary parameters
* to execute the AssociateAddress service method on AmazonEC2.
*
* @return The response from the AssociateAddress service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public AssociateAddressResult associateAddress(AssociateAddressRequest associateAddressRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes the specified customer gateway. You must delete the VPN
* connection before you can delete the customer gateway.
*
*
* @param deleteCustomerGatewayRequest Container for the necessary
* parameters to execute the DeleteCustomerGateway service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteCustomerGateway(DeleteCustomerGatewayRequest deleteCustomerGatewayRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates an entry (a rule) in a network ACL with the specified rule
* number. Each network ACL has a set of numbered ingress rules and a
* separate set of numbered egress rules. When determining whether a
* packet should be allowed in or out of a subnet associated with the
* ACL, we process the entries in the ACL according to the rule numbers,
* in ascending order. Each network ACL has a set of ingress rules and a
* separate set of egress rules.
*
*
* We recommend that you leave room between the rule numbers (for
* example, 100, 110, 120, ...), and not number them one right after the
* other (for example, 101, 102, 103, ...). This makes it easier to add a
* rule between existing ones without having to renumber the rules.
*
*
* After you add an entry, you can't modify it; you must either replace
* it, or create an entry and delete the old one.
*
*
* For more information about network ACLs, see
* Network ACLs
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param createNetworkAclEntryRequest Container for the necessary
* parameters to execute the CreateNetworkAclEntry service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void createNetworkAclEntry(CreateNetworkAclEntryRequest createNetworkAclEntryRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Accept a VPC peering connection request. To accept a request, the VPC
* peering connection must be in the pending-acceptance
* state, and you must be the owner of the peer VPC. Use the
* DescribeVpcPeeringConnections request to view your
* outstanding VPC peering connection requests.
*
*
* @param acceptVpcPeeringConnectionRequest Container for the necessary
* parameters to execute the AcceptVpcPeeringConnection service method on
* AmazonEC2.
*
* @return The response from the AcceptVpcPeeringConnection service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public AcceptVpcPeeringConnectionResult acceptVpcPeeringConnection(AcceptVpcPeeringConnectionRequest acceptVpcPeeringConnectionRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your export tasks.
*
*
* @param describeExportTasksRequest Container for the necessary
* parameters to execute the DescribeExportTasks service method on
* AmazonEC2.
*
* @return The response from the DescribeExportTasks service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeExportTasksResult describeExportTasks(DescribeExportTasksRequest describeExportTasksRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Detaches an Internet gateway from a VPC, disabling connectivity
* between the Internet and the VPC. The VPC must not contain any running
* instances with Elastic IP addresses.
*
*
* @param detachInternetGatewayRequest Container for the necessary
* parameters to execute the DetachInternetGateway service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void detachInternetGateway(DetachInternetGatewayRequest detachInternetGatewayRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Requests a VPC peering connection between two VPCs: a requester VPC
* that you own and a peer VPC with which to create the connection. The
* peer VPC can belong to another AWS account. The requester VPC and peer
* VPC cannot have overlapping CIDR blocks.
*
*
* The owner of the peer VPC must accept the peering request to activate
* the peering connection. The VPC peering connection request expires
* after 7 days, after which it cannot be accepted or rejected.
*
*
* A CreateVpcPeeringConnection request between VPCs with
* overlapping CIDR blocks results in the VPC peering connection having a
* status of failed .
*
*
* @param createVpcPeeringConnectionRequest Container for the necessary
* parameters to execute the CreateVpcPeeringConnection service method on
* AmazonEC2.
*
* @return The response from the CreateVpcPeeringConnection service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateVpcPeeringConnectionResult createVpcPeeringConnection(CreateVpcPeeringConnectionRequest createVpcPeeringConnectionRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates a route table for the specified VPC. After you create a route
* table, you can add routes and associate the table with a subnet.
*
*
* For more information about route tables, see
* Route Tables
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param createRouteTableRequest Container for the necessary parameters
* to execute the CreateRouteTable service method on AmazonEC2.
*
* @return The response from the CreateRouteTable service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateRouteTableResult createRouteTable(CreateRouteTableRequest createRouteTableRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the specified Amazon EBS volumes.
*
*
* For more information about Amazon EBS volumes, see
* Amazon EBS Volumes
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param describeVolumesRequest Container for the necessary parameters
* to execute the DescribeVolumes service method on AmazonEC2.
*
* @return The response from the DescribeVolumes service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVolumesResult describeVolumes(DescribeVolumesRequest describeVolumesRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes your account's Reserved Instance listings in the Reserved
* Instance Marketplace.
*
*
* For more information, see
* Reserved Instance Marketplace
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param describeReservedInstancesListingsRequest Container for the
* necessary parameters to execute the DescribeReservedInstancesListings
* service method on AmazonEC2.
*
* @return The response from the DescribeReservedInstancesListings
* service method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeReservedInstancesListingsResult describeReservedInstancesListings(DescribeReservedInstancesListingsRequest describeReservedInstancesListingsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Submits feedback about the status of an instance. The instance must
* be in the running state. If your experience with the
* instance differs from the instance status returned by
* DescribeInstanceStatus, use ReportInstanceStatus to report your
* experience with the instance. Amazon EC2 collects this information to
* improve the accuracy of status checks.
*
*
* @param reportInstanceStatusRequest Container for the necessary
* parameters to execute the ReportInstanceStatus service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void reportInstanceStatus(ReportInstanceStatusRequest reportInstanceStatusRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your route tables.
*
*
* For more information about route tables, see
* Route Tables
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param describeRouteTablesRequest Container for the necessary
* parameters to execute the DescribeRouteTables service method on
* AmazonEC2.
*
* @return The response from the DescribeRouteTables service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeRouteTablesResult describeRouteTables(DescribeRouteTablesRequest describeRouteTablesRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your DHCP options sets.
*
*
* For more information about DHCP options sets, see
* DHCP Options Sets
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param describeDhcpOptionsRequest Container for the necessary
* parameters to execute the DescribeDhcpOptions service method on
* AmazonEC2.
*
* @return The response from the DescribeDhcpOptions service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeDhcpOptionsResult describeDhcpOptions(DescribeDhcpOptionsRequest describeDhcpOptionsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Enables monitoring for a running instance. For more information about
* monitoring instances, see
* Monitoring Your Instances and Volumes
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param monitorInstancesRequest Container for the necessary parameters
* to execute the MonitorInstances service method on AmazonEC2.
*
* @return The response from the MonitorInstances service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public MonitorInstancesResult monitorInstances(MonitorInstancesRequest monitorInstancesRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your network ACLs.
*
*
* For more information about network ACLs, see
* Network ACLs
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param describeNetworkAclsRequest Container for the necessary
* parameters to execute the DescribeNetworkAcls service method on
* AmazonEC2.
*
* @return The response from the DescribeNetworkAcls service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeNetworkAclsResult describeNetworkAcls(DescribeNetworkAclsRequest describeNetworkAclsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your bundling tasks.
*
*
* NOTE: Completed bundle tasks are listed for only a limited
* time. If your bundle task is no longer in the list, you can still
* register an AMI from it. Just use RegisterImage with the Amazon S3
* bucket name and image manifest name you provided to the bundle task.
*
*
* @param describeBundleTasksRequest Container for the necessary
* parameters to execute the DescribeBundleTasks service method on
* AmazonEC2.
*
* @return The response from the DescribeBundleTasks service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeBundleTasksResult describeBundleTasks(DescribeBundleTasksRequest describeBundleTasksRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates an import instance task using metadata from the specified
* disk image. After importing the image, you then upload it using the
* ec2-import-volume command in the EC2 command line tools. For more
* information, see Using the Command Line Tools to Import Your Virtual
* Machine to Amazon EC2 in the Amazon Elastic Compute Cloud User Guide.
*
*
* @param importInstanceRequest Container for the necessary parameters to
* execute the ImportInstance service method on AmazonEC2.
*
* @return The response from the ImportInstance service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public ImportInstanceResult importInstance(ImportInstanceRequest importInstanceRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Removes one or more ingress rules from a security group. The values
* that you specify in the revoke request (for example, ports) must match
* the existing rule's values for the rule to be removed.
*
*
* Each rule consists of the protocol and the CIDR range or source
* security group. For the TCP and UDP protocols, you must also specify
* the destination port or range of ports. For the ICMP protocol, you
* must also specify the ICMP type and code.
*
*
* Rule changes are propagated to instances within the security group as
* quickly as possible. However, a small delay might occur.
*
*
* @param revokeSecurityGroupIngressRequest Container for the necessary
* parameters to execute the RevokeSecurityGroupIngress service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void revokeSecurityGroupIngress(RevokeSecurityGroupIngressRequest revokeSecurityGroupIngressRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes a VPC peering connection. Either the owner of the requester
* VPC or the owner of the peer VPC can delete the VPC peering connection
* if it's in the active state. The owner of the requester
* VPC can delete a VPC peering connection in the
* pending-acceptance state.
*
*
* @param deleteVpcPeeringConnectionRequest Container for the necessary
* parameters to execute the DeleteVpcPeeringConnection service method on
* AmazonEC2.
*
* @return The response from the DeleteVpcPeeringConnection service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DeleteVpcPeeringConnectionResult deleteVpcPeeringConnection(DeleteVpcPeeringConnectionRequest deleteVpcPeeringConnectionRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Gets the console output for the specified instance.
*
*
* Instances do not have a physical monitor through which you can view
* their console output. They also lack physical controls that allow you
* to power up, reboot, or shut them down. To allow these actions, we
* provide them through the Amazon EC2 API and command line interface.
*
*
* Instance console output is buffered and posted shortly after instance
* boot, reboot, and termination. Amazon EC2 preserves the most recent 64
* KB output which is available for at least one hour after the most
* recent post.
*
*
* For Linux/Unix instances, the instance console output displays the
* exact console output that would normally be displayed on a physical
* monitor attached to a machine. This output is buffered because the
* instance produces it and then posts it to a store where the instance's
* owner can retrieve it.
*
*
* For Windows instances, the instance console output displays the last
* three system event log errors.
*
*
* @param getConsoleOutputRequest Container for the necessary parameters
* to execute the GetConsoleOutput service method on AmazonEC2.
*
* @return The response from the GetConsoleOutput service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public GetConsoleOutputResult getConsoleOutput(GetConsoleOutputRequest getConsoleOutputRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates an Internet gateway for use with a VPC. After creating the
* Internet gateway, you attach it to a VPC using AttachInternetGateway.
*
*
* For more information about your VPC and Internet gateway, see the
* Amazon Virtual Private Cloud User Guide
* .
*
*
* @param createInternetGatewayRequest Container for the necessary
* parameters to execute the CreateInternetGateway service method on
* AmazonEC2.
*
* @return The response from the CreateInternetGateway service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateInternetGatewayResult createInternetGateway(CreateInternetGatewayRequest createInternetGatewayRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes the specified static route associated with a VPN connection
* between an existing virtual private gateway and a VPN customer
* gateway. The static route allows traffic to be routed from the virtual
* private gateway to the VPN customer gateway.
*
*
* @param deleteVpnConnectionRouteRequest Container for the necessary
* parameters to execute the DeleteVpnConnectionRoute service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteVpnConnectionRoute(DeleteVpnConnectionRouteRequest deleteVpnConnectionRouteRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Detaches a network interface from an instance.
*
*
* @param detachNetworkInterfaceRequest Container for the necessary
* parameters to execute the DetachNetworkInterface service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void detachNetworkInterface(DetachNetworkInterfaceRequest detachNetworkInterfaceRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Modifies the specified attribute of the specified AMI. You can
* specify only one attribute at a time.
*
*
* NOTE: AWS Marketplace product codes cannot be modified. Images
* with an AWS Marketplace product code cannot be made public.
*
*
* @param modifyImageAttributeRequest Container for the necessary
* parameters to execute the ModifyImageAttribute service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void modifyImageAttribute(ModifyImageAttributeRequest modifyImageAttributeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Provides information to AWS about your VPN customer gateway device.
* The customer gateway is the appliance at your end of the VPN
* connection. (The device on the AWS side of the VPN connection is the
* virtual private gateway.) You must provide the Internet-routable IP
* address of the customer gateway's external interface. The IP address
* must be static and can't be behind a device performing network address
* translation (NAT).
*
*
* For devices that use Border Gateway Protocol (BGP), you can also
* provide the device's BGP Autonomous System Number (ASN). You can use
* an existing ASN assigned to your network. If you don't have an ASN
* already, you can use a private ASN (in the 64512 - 65534 range).
*
*
* NOTE: Amazon EC2 supports all 2-byte ASN numbers in the range
* of 1 - 65534, with the exception of 7224, which is reserved in the
* us-east-1 region, and 9059, which is reserved in the eu-west-1 region.
*
*
* For more information about VPN customer gateways, see
* Adding a Hardware Virtual Private Gateway to Your VPC
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param createCustomerGatewayRequest Container for the necessary
* parameters to execute the CreateCustomerGateway service method on
* AmazonEC2.
*
* @return The response from the CreateCustomerGateway service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateCustomerGatewayResult createCustomerGateway(CreateCustomerGatewayRequest createCustomerGatewayRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates a datafeed for Spot Instances, enabling you to view Spot
* Instance usage logs. You can create one data feed per AWS account. For
* more information, see
* Spot Instances
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param createSpotDatafeedSubscriptionRequest Container for the
* necessary parameters to execute the CreateSpotDatafeedSubscription
* service method on AmazonEC2.
*
* @return The response from the CreateSpotDatafeedSubscription service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateSpotDatafeedSubscriptionResult createSpotDatafeedSubscription(CreateSpotDatafeedSubscriptionRequest createSpotDatafeedSubscriptionRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Attaches an Internet gateway to a VPC, enabling connectivity between
* the Internet and the VPC. For more information about your VPC and
* Internet gateway, see the
* Amazon Virtual Private Cloud User Guide
* .
*
*
* @param attachInternetGatewayRequest Container for the necessary
* parameters to execute the AttachInternetGateway service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void attachInternetGateway(AttachInternetGatewayRequest attachInternetGatewayRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes the specified VPN connection.
*
*
* If you're deleting the VPC and its associated components, we
* recommend that you detach the virtual private gateway from the VPC and
* delete the VPC before deleting the VPN connection.
*
*
* @param deleteVpnConnectionRequest Container for the necessary
* parameters to execute the DeleteVpnConnection service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteVpnConnection(DeleteVpnConnectionRequest deleteVpnConnectionRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your conversion tasks. For more information,
* see
* Using the Command Line Tools to Import Your Virtual Machine to Amazon EC2
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param describeConversionTasksRequest Container for the necessary
* parameters to execute the DescribeConversionTasks service method on
* AmazonEC2.
*
* @return The response from the DescribeConversionTasks service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeConversionTasksResult describeConversionTasks(DescribeConversionTasksRequest describeConversionTasksRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates a VPN connection between an existing virtual private gateway
* and a VPN customer gateway. The only supported connection type is
* ipsec.1 .
*
*
* The response includes information that you need to give to your
* network administrator to configure your customer gateway.
*
*
* IMPORTANT: We strongly recommend that you use HTTPS when
* calling this operation because the response contains sensitive
* cryptographic information for configuring your customer gateway.
*
*
* If you decide to shut down your VPN connection for any reason and
* later create a new VPN connection, you must reconfigure your customer
* gateway with the new information returned from this call.
*
*
* For more information about VPN connections, see
* Adding a Hardware Virtual Private Gateway to Your VPC
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param createVpnConnectionRequest Container for the necessary
* parameters to execute the CreateVpnConnection service method on
* AmazonEC2.
*
* @return The response from the CreateVpnConnection service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateVpnConnectionResult createVpnConnection(CreateVpnConnectionRequest createVpnConnectionRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the specified attribute of the specified instance. You can
* specify only one attribute at a time.
*
*
* @param describeInstanceAttributeRequest Container for the necessary
* parameters to execute the DescribeInstanceAttribute service method on
* AmazonEC2.
*
* @return The response from the DescribeInstanceAttribute service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeInstanceAttributeResult describeInstanceAttribute(DescribeInstanceAttributeRequest describeInstanceAttributeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your VPC peering connections.
*
*
* @param describeVpcPeeringConnectionsRequest Container for the
* necessary parameters to execute the DescribeVpcPeeringConnections
* service method on AmazonEC2.
*
* @return The response from the DescribeVpcPeeringConnections service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVpcPeeringConnectionsResult describeVpcPeeringConnections(DescribeVpcPeeringConnectionsRequest describeVpcPeeringConnectionsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your subnets.
*
*
* For more information about subnets, see
* Your VPC and Subnets
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param describeSubnetsRequest Container for the necessary parameters
* to execute the DescribeSubnets service method on AmazonEC2.
*
* @return The response from the DescribeSubnets service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSubnetsResult describeSubnets(DescribeSubnetsRequest describeSubnetsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Launches the specified number of instances using an AMI for which you
* have permissions.
*
*
* When you launch an instance, it enters the pending
* state. After the instance is ready for you, it enters the
* running state. To check the state of your instance, call
* DescribeInstances.
*
*
* If you don't specify a security group when launching an instance,
* Amazon EC2 uses the default security group. For more information, see
* Security Groups
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* Linux instances have access to the public key of the key pair at
* boot. You can use this key to provide secure access to the instance.
* Amazon EC2 public images use this feature to provide secure access
* without passwords. For more information, see
* Key Pairs
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* You can provide optional user data when launching an instance. For
* more information, see
* Instance Metadata
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* If any of the AMIs have a product code attached for which the user
* has not subscribed, RunInstances fails.
*
*
* For more information about troubleshooting, see
* What To Do If An Instance Immediately Terminates , and Troubleshooting Connecting to Your Instance
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param runInstancesRequest Container for the necessary parameters to
* execute the RunInstances service method on AmazonEC2.
*
* @return The response from the RunInstances service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public RunInstancesResult runInstances(RunInstancesRequest runInstancesRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your placement groups. For more information
* about placement groups and cluster instances, see
* Cluster Instances
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param describePlacementGroupsRequest Container for the necessary
* parameters to execute the DescribePlacementGroups service method on
* AmazonEC2.
*
* @return The response from the DescribePlacementGroups service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribePlacementGroupsResult describePlacementGroups(DescribePlacementGroupsRequest describePlacementGroupsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Associates a subnet with a route table. The subnet and route table
* must be in the same VPC. This association causes traffic originating
* from the subnet to be routed according to the routes in the route
* table. The action returns an association ID, which you need in order
* to disassociate the route table from the subnet later. A route table
* can be associated with multiple subnets.
*
*
* For more information about route tables, see
* Route Tables
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param associateRouteTableRequest Container for the necessary
* parameters to execute the AssociateRouteTable service method on
* AmazonEC2.
*
* @return The response from the AssociateRouteTable service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public AssociateRouteTableResult associateRouteTable(AssociateRouteTableRequest associateRouteTableRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your instances.
*
*
* If you specify one or more instance IDs, Amazon EC2 returns
* information for those instances. If you do not specify instance IDs,
* Amazon EC2 returns information for all relevant instances. If you
* specify an instance ID that is not valid, an error is returned. If you
* specify an instance that you do not own, it is not included in the
* returned results.
*
*
* Recently terminated instances might appear in the returned results.
* This interval is usually less than one hour.
*
*
* @param describeInstancesRequest Container for the necessary parameters
* to execute the DescribeInstances service method on AmazonEC2.
*
* @return The response from the DescribeInstances service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeInstancesResult describeInstances(DescribeInstancesRequest describeInstancesRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes the specified network ACL. You can't delete the ACL if it's
* associated with any subnets. You can't delete the default network ACL.
*
*
* @param deleteNetworkAclRequest Container for the necessary parameters
* to execute the DeleteNetworkAcl service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteNetworkAcl(DeleteNetworkAclRequest deleteNetworkAclRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Modifies a volume attribute.
*
*
* By default, all I/O operations for the volume are suspended when the
* data on the volume is determined to be potentially inconsistent, to
* prevent undetectable, latent data corruption. The I/O access to the
* volume can be resumed by first enabling I/O access and then checking
* the data consistency on your volume.
*
*
* You can change the default behavior to resume I/O operations. We
* recommend that you change this only for boot volumes or for volumes
* that are stateless or disposable.
*
*
* @param modifyVolumeAttributeRequest Container for the necessary
* parameters to execute the ModifyVolumeAttribute service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void modifyVolumeAttribute(ModifyVolumeAttributeRequest modifyVolumeAttributeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of the images (AMIs, AKIs, and ARIs) available
* to you. Images available to you include public images, private images
* that you own, and private images owned by other AWS accounts but for
* which you have explicit launch permissions.
*
*
* NOTE: Deregistered images are included in the returned results
* for an unspecified interval after deregistration.
*
*
* @param describeImagesRequest Container for the necessary parameters to
* execute the DescribeImages service method on AmazonEC2.
*
* @return The response from the DescribeImages service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeImagesResult describeImages(DescribeImagesRequest describeImagesRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Starts an Amazon EBS-backed AMI that you've previously stopped.
*
*
* Instances that use Amazon EBS volumes as their root devices can be
* quickly stopped and started. When an instance is stopped, the compute
* resources are released and you are not billed for hourly instance
* usage. However, your root partition Amazon EBS volume remains,
* continues to persist your data, and you are charged for Amazon EBS
* volume usage. You can restart your instance at any time. Each time you
* transition an instance from stopped to started, Amazon EC2 charges a
* full instance hour, even if transitions happen multiple times within a
* single hour.
*
*
* Before stopping an instance, make sure it is in a state from which it
* can be restarted. Stopping an instance does not preserve data stored
* in RAM.
*
*
* Performing this operation on an instance that uses an instance store
* as its root device returns an error.
*
*
* For more information, see
* Stopping Instances
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param startInstancesRequest Container for the necessary parameters to
* execute the StartInstances service method on AmazonEC2.
*
* @return The response from the StartInstances service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public StartInstancesResult startInstances(StartInstancesRequest startInstancesRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Cancels the specified Reserved Instance listing in the Reserved
* Instance Marketplace.
*
*
* For more information, see
* Reserved Instance Marketplace
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param cancelReservedInstancesListingRequest Container for the
* necessary parameters to execute the CancelReservedInstancesListing
* service method on AmazonEC2.
*
* @return The response from the CancelReservedInstancesListing service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CancelReservedInstancesListingResult cancelReservedInstancesListing(CancelReservedInstancesListingRequest cancelReservedInstancesListingRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Modifies the specified attribute of the specified instance. You can
* specify only one attribute at a time.
*
*
* To modify some attributes, the instance must be stopped. For more
* information, see
* Modifying Attributes of a Stopped Instance
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param modifyInstanceAttributeRequest Container for the necessary
* parameters to execute the ModifyInstanceAttribute service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void modifyInstanceAttribute(ModifyInstanceAttributeRequest modifyInstanceAttributeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes the specified set of DHCP options. You must disassociate the
* set of DHCP options before you can delete it. You can disassociate the
* set of DHCP options by associating either a new set of options or the
* default set of options with the VPC.
*
*
* @param deleteDhcpOptionsRequest Container for the necessary parameters
* to execute the DeleteDhcpOptions service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteDhcpOptions(DeleteDhcpOptionsRequest deleteDhcpOptionsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Adds one or more ingress rules to a security group.
*
*
* IMPORTANT: EC2-Classic: You can have up to 100 rules per
* group. EC2-VPC: You can have up to 50 rules per group (covering both
* ingress and egress rules).
*
*
* Rule changes are propagated to instances within the security group as
* quickly as possible. However, a small delay might occur.
*
*
* [EC2-Classic] This action gives one or more CIDR IP address ranges
* permission to access a security group in your account, or gives one or
* more security groups (called the source groups ) permission to
* access a security group for your account. A source group can be for
* your own AWS account, or another.
*
*
* [EC2-VPC] This action gives one or more CIDR IP address ranges
* permission to access a security group in your VPC, or gives one or
* more other security groups (called the source groups )
* permission to access a security group for your VPC. The security
* groups must all be for the same VPC.
*
*
* @param authorizeSecurityGroupIngressRequest Container for the
* necessary parameters to execute the AuthorizeSecurityGroupIngress
* service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void authorizeSecurityGroupIngress(AuthorizeSecurityGroupIngressRequest authorizeSecurityGroupIngressRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the Spot Instance requests that belong to your account.
* Spot Instances are instances that Amazon EC2 starts on your behalf
* when the maximum price that you specify exceeds the current Spot
* Price. Amazon EC2 periodically sets the Spot Price based on available
* Spot Instance capacity and current Spot Instance requests. For more
* information about Spot Instances, see
* Spot Instances
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* You can use DescribeSpotInstanceRequests to find a
* running Spot Instance by examining the response. If the status of the
* Spot Instance is fulfilled , the instance ID appears in
* the response and contains the identifier of the instance.
* Alternatively, you can use DescribeInstances with a filter to look for
* instances where the instance lifecycle is spot .
*
*
* @param describeSpotInstanceRequestsRequest Container for the necessary
* parameters to execute the DescribeSpotInstanceRequests service method
* on AmazonEC2.
*
* @return The response from the DescribeSpotInstanceRequests service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSpotInstanceRequestsResult describeSpotInstanceRequests(DescribeSpotInstanceRequestsRequest describeSpotInstanceRequestsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates a VPC with the specified CIDR block.
*
*
* The smallest VPC you can create uses a /28 netmask (16 IP addresses),
* and the largest uses a /16 netmask (65,536 IP addresses). To help you
* decide how big to make your VPC, see
* Your VPC and Subnets
* in the Amazon Virtual Private Cloud User Guide .
*
*
* By default, each instance you launch in the VPC has the default DHCP
* options, which includes only a default DNS server that we provide
* (AmazonProvidedDNS). For more information about DHCP options, see
* DHCP Options Sets
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param createVpcRequest Container for the necessary parameters to
* execute the CreateVpc service method on AmazonEC2.
*
* @return The response from the CreateVpc service method, as returned by
* AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateVpcResult createVpc(CreateVpcRequest createVpcRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your VPN customer gateways.
*
*
* For more information about VPN customer gateways, see
* Adding a Hardware Virtual Private Gateway to Your VPC
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param describeCustomerGatewaysRequest Container for the necessary
* parameters to execute the DescribeCustomerGateways service method on
* AmazonEC2.
*
* @return The response from the DescribeCustomerGateways service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeCustomerGatewaysResult describeCustomerGateways(DescribeCustomerGatewaysRequest describeCustomerGatewaysRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Cancels an active export task. The request removes all artifacts of
* the export, including any partially-created Amazon S3 objects. If the
* export task is complete or is in the process of transferring the final
* disk image, the command fails and returns an error.
*
*
* @param cancelExportTaskRequest Container for the necessary parameters
* to execute the CancelExportTask service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void cancelExportTask(CancelExportTaskRequest cancelExportTaskRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates a route in a route table within a VPC.
*
*
* You must specify one of the following targets: Internet gateway, NAT
* instance, VPC peering connection, or network interface.
*
*
* When determining how to route traffic, we use the route with the most
* specific match. For example, let's say the traffic is destined for
* 192.0.2.3 , and the route table includes the following
* two routes:
*
*
*
* -
* 192.0.2.0/24 (goes to some target A)
*
*
* -
* 192.0.2.0/28 (goes to some target B)
*
*
*
*
*
* Both routes apply to the traffic destined for 192.0.2.3
* . However, the second route in the list covers a smaller number of IP
* addresses and is therefore more specific, so we use that route to
* determine where to target the traffic.
*
*
* For more information about route tables, see
* Route Tables
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param createRouteRequest Container for the necessary parameters to
* execute the CreateRoute service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void createRoute(CreateRouteRequest createRouteRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Initiates the copy of an AMI from the specified source region to the
* region in which the request was made. You specify the destination
* region by using its endpoint when making the request. AMIs that use
* encrypted Amazon EBS snapshots cannot be copied with this method.
*
*
* For more information, see
* Copying AMIs
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param copyImageRequest Container for the necessary parameters to
* execute the CopyImage service method on AmazonEC2.
*
* @return The response from the CopyImage service method, as returned by
* AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CopyImageResult copyImage(CopyImageRequest copyImageRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Modifies the specified network interface attribute. You can specify
* only one attribute at a time.
*
*
* @param modifyNetworkInterfaceAttributeRequest Container for the
* necessary parameters to execute the ModifyNetworkInterfaceAttribute
* service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void modifyNetworkInterfaceAttribute(ModifyNetworkInterfaceAttributeRequest modifyNetworkInterfaceAttributeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes the specified route table. You must disassociate the route
* table from any subnets before you can delete it. You can't delete the
* main route table.
*
*
* @param deleteRouteTableRequest Container for the necessary parameters
* to execute the DeleteRouteTable service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteRouteTable(DeleteRouteTableRequest deleteRouteTableRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes a network interface attribute. You can specify only one
* attribute at a time.
*
*
* @param describeNetworkInterfaceAttributeRequest Container for the
* necessary parameters to execute the DescribeNetworkInterfaceAttribute
* service method on AmazonEC2.
*
* @return The response from the DescribeNetworkInterfaceAttribute
* service method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeNetworkInterfaceAttributeResult describeNetworkInterfaceAttribute(DescribeNetworkInterfaceAttributeRequest describeNetworkInterfaceAttributeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates a Spot Instance request. Spot Instances are instances that
* Amazon EC2 starts on your behalf when the maximum price that you
* specify exceeds the current Spot Price. Amazon EC2 periodically sets
* the Spot Price based on available Spot Instance capacity and current
* Spot Instance requests. For more information about Spot Instances, see
* Spot Instances
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param requestSpotInstancesRequest Container for the necessary
* parameters to execute the RequestSpotInstances service method on
* AmazonEC2.
*
* @return The response from the RequestSpotInstances service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public RequestSpotInstancesResult requestSpotInstances(RequestSpotInstancesRequest requestSpotInstancesRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Adds or overwrites one or more tags for the specified EC2 resource or
* resources. Each resource can have a maximum of 10 tags. Each tag
* consists of a key and optional value. Tag keys must be unique per
* resource.
*
*
* For more information about tags, see
* Tagging Your Resources
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param createTagsRequest Container for the necessary parameters to
* execute the CreateTags service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void createTags(CreateTagsRequest createTagsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the specified attribute of the specified volume. You can
* specify only one attribute at a time.
*
*
* For more information about Amazon EBS volumes, see
* Amazon EBS Volumes
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param describeVolumeAttributeRequest Container for the necessary
* parameters to execute the DescribeVolumeAttribute service method on
* AmazonEC2.
*
* @return The response from the DescribeVolumeAttribute service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVolumeAttributeResult describeVolumeAttribute(DescribeVolumeAttributeRequest describeVolumeAttributeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Attaches a network interface to an instance.
*
*
* @param attachNetworkInterfaceRequest Container for the necessary
* parameters to execute the AttachNetworkInterface service method on
* AmazonEC2.
*
* @return The response from the AttachNetworkInterface service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public AttachNetworkInterfaceResult attachNetworkInterface(AttachNetworkInterfaceRequest attachNetworkInterfaceRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Replaces an existing route within a route table in a VPC. You must
* provide only one of the following: Internet gateway, NAT instance, VPC
* peering connection, or network interface.
*
*
* For more information about route tables, see
* Route Tables
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param replaceRouteRequest Container for the necessary parameters to
* execute the ReplaceRoute service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void replaceRoute(ReplaceRouteRequest replaceRouteRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of the tags for your EC2 resources.
*
*
* For more information about tags, see
* Tagging Your Resources
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param describeTagsRequest Container for the necessary parameters to
* execute the DescribeTags service method on AmazonEC2.
*
* @return The response from the DescribeTags service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeTagsResult describeTags(DescribeTagsRequest describeTagsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Cancels a bundling operation for an instance store-backed Windows
* instance.
*
*
* @param cancelBundleTaskRequest Container for the necessary parameters
* to execute the CancelBundleTask service method on AmazonEC2.
*
* @return The response from the CancelBundleTask service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CancelBundleTaskResult cancelBundleTask(CancelBundleTaskRequest cancelBundleTaskRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Disables a virtual private gateway (VGW) from propagating routes to
* the routing tables of a VPC.
*
*
* @param disableVgwRoutePropagationRequest Container for the necessary
* parameters to execute the DisableVgwRoutePropagation service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void disableVgwRoutePropagation(DisableVgwRoutePropagationRequest disableVgwRoutePropagationRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Cancels one or more Spot Instance requests. Spot Instances are
* instances that Amazon EC2 starts on your behalf when the maximum price
* that you specify exceeds the current Spot Price. Amazon EC2
* periodically sets the Spot Price based on available Spot Instance
* capacity and current Spot Instance requests. For more information
* about Spot Instances, see
* Spot Instances
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* IMPORTANT: Canceling a Spot Instance request does not
* terminate running Spot Instances associated with the request.
*
*
* @param cancelSpotInstanceRequestsRequest Container for the necessary
* parameters to execute the CancelSpotInstanceRequests service method on
* AmazonEC2.
*
* @return The response from the CancelSpotInstanceRequests service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CancelSpotInstanceRequestsResult cancelSpotInstanceRequests(CancelSpotInstanceRequestsRequest cancelSpotInstanceRequestsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Purchases a Reserved Instance for use with your account. With Amazon
* EC2 Reserved Instances, you obtain a capacity reservation for a
* certain instance configuration over a specified period of time. You
* pay a lower usage rate than with On-Demand instances for the time that
* you actually use the capacity reservation.
*
*
* For more information, see
* Reserved Instance Marketplace
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param purchaseReservedInstancesOfferingRequest Container for the
* necessary parameters to execute the PurchaseReservedInstancesOffering
* service method on AmazonEC2.
*
* @return The response from the PurchaseReservedInstancesOffering
* service method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public PurchaseReservedInstancesOfferingResult purchaseReservedInstancesOffering(PurchaseReservedInstancesOfferingRequest purchaseReservedInstancesOfferingRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Adds or removes permission settings for the specified snapshot.
*
*
* For more information on modifying snapshot permissions, see
* Sharing Snapshots
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* NOTE: Snapshots with AWS Marketplace product codes cannot be
* made public.
*
*
* @param modifySnapshotAttributeRequest Container for the necessary
* parameters to execute the ModifySnapshotAttribute service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void modifySnapshotAttribute(ModifySnapshotAttributeRequest modifySnapshotAttributeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the modifications made to your Reserved Instances. If no
* parameter is specified, information about all your Reserved Instances
* modification requests is returned. If a modification ID is specified,
* only information about the specific modification is returned.
*
*
* @param describeReservedInstancesModificationsRequest Container for the
* necessary parameters to execute the
* DescribeReservedInstancesModifications service method on AmazonEC2.
*
* @return The response from the DescribeReservedInstancesModifications
* service method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeReservedInstancesModificationsResult describeReservedInstancesModifications(DescribeReservedInstancesModificationsRequest describeReservedInstancesModificationsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Shuts down one or more instances. This operation is idempotent; if
* you terminate an instance more than once, each call succeeds.
*
*
* Terminated instances remain visible after termination (for
* approximately one hour).
*
*
* By default, Amazon EC2 deletes all Amazon EBS volumes that were
* attached when the instance launched. Volumes attached after instance
* launch continue running.
*
*
* You can stop, start, and terminate EBS-backed instances. You can only
* terminate instance store-backed instances. What happens to an instance
* differs if you stop it or terminate it. For example, when you stop an
* instance, the root device and any other devices attached to the
* instance persist. When you terminate an instance, the root device and
* any other devices attached during the instance launch are
* automatically deleted. For more information about the differences
* between stopping and terminating instances, see
* Instance Lifecycle
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* For more information about troubleshooting, see
* Troubleshooting Terminating Your Instance
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param terminateInstancesRequest Container for the necessary
* parameters to execute the TerminateInstances service method on
* AmazonEC2.
*
* @return The response from the TerminateInstances service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public TerminateInstancesResult terminateInstances(TerminateInstancesRequest terminateInstancesRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes the datafeed for Spot Instances. For more information, see
* Spot Instances
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param deleteSpotDatafeedSubscriptionRequest Container for the
* necessary parameters to execute the DeleteSpotDatafeedSubscription
* service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteSpotDatafeedSubscription(DeleteSpotDatafeedSubscriptionRequest deleteSpotDatafeedSubscriptionRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes the specified Internet gateway. You must detach the Internet
* gateway from the VPC before you can delete it.
*
*
* @param deleteInternetGatewayRequest Container for the necessary
* parameters to execute the DeleteInternetGateway service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteInternetGateway(DeleteInternetGatewayRequest deleteInternetGatewayRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the specified attribute of the specified snapshot. You can
* specify only one attribute at a time.
*
*
* For more information about Amazon EBS snapshots, see
* Amazon EBS Snapshots
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param describeSnapshotAttributeRequest Container for the necessary
* parameters to execute the DescribeSnapshotAttribute service method on
* AmazonEC2.
*
* @return The response from the DescribeSnapshotAttribute service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSnapshotAttributeResult describeSnapshotAttribute(DescribeSnapshotAttributeRequest describeSnapshotAttributeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Changes the route table associated with a given subnet in a VPC.
* After the operation completes, the subnet uses the routes in the new
* route table it's associated with. For more information about route
* tables, see
* Route Tables
* in the Amazon Virtual Private Cloud User Guide .
*
*
* You can also use ReplaceRouteTableAssociation to change which table
* is the main route table in the VPC. You just specify the main route
* table's association ID and the route table to be the new main route
* table.
*
*
* @param replaceRouteTableAssociationRequest Container for the necessary
* parameters to execute the ReplaceRouteTableAssociation service method
* on AmazonEC2.
*
* @return The response from the ReplaceRouteTableAssociation service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public ReplaceRouteTableAssociationResult replaceRouteTableAssociation(ReplaceRouteTableAssociationRequest replaceRouteTableAssociationRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your Elastic IP addresses.
*
*
* An Elastic IP address is for use in either the EC2-Classic platform
* or in a VPC. For more information, see
* Elastic IP Addresses
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param describeAddressesRequest Container for the necessary parameters
* to execute the DescribeAddresses service method on AmazonEC2.
*
* @return The response from the DescribeAddresses service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeAddressesResult describeAddresses(DescribeAddressesRequest describeAddressesRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the specified attribute of the specified AMI. You can
* specify only one attribute at a time.
*
*
* @param describeImageAttributeRequest Container for the necessary
* parameters to execute the DescribeImageAttribute service method on
* AmazonEC2.
*
* @return The response from the DescribeImageAttribute service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeImageAttributeResult describeImageAttribute(DescribeImageAttributeRequest describeImageAttributeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your key pairs.
*
*
* For more information about key pairs, see
* Key Pairs
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param describeKeyPairsRequest Container for the necessary parameters
* to execute the DescribeKeyPairs service method on AmazonEC2.
*
* @return The response from the DescribeKeyPairs service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeKeyPairsResult describeKeyPairs(DescribeKeyPairsRequest describeKeyPairsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Determines whether a product code is associated with an instance.
* This action can only be used by the owner of the product code. It is
* useful when a product code owner needs to verify whether another
* user's instance is eligible for support.
*
*
* @param confirmProductInstanceRequest Container for the necessary
* parameters to execute the ConfirmProductInstance service method on
* AmazonEC2.
*
* @return The response from the ConfirmProductInstance service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public ConfirmProductInstanceResult confirmProductInstance(ConfirmProductInstanceRequest confirmProductInstanceRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Disassociates a subnet from a route table.
*
*
* After you perform this action, the subnet no longer uses the routes
* in the route table. Instead, it uses the routes in the VPC's main
* route table. For more information about route tables, see
* Route Tables
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param disassociateRouteTableRequest Container for the necessary
* parameters to execute the DisassociateRouteTable service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void disassociateRouteTable(DisassociateRouteTableRequest disassociateRouteTableRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the specified attribute of the specified VPC. You can
* specify only one attribute at a time.
*
*
* @param describeVpcAttributeRequest Container for the necessary
* parameters to execute the DescribeVpcAttribute service method on
* AmazonEC2.
*
* @return The response from the DescribeVpcAttribute service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVpcAttributeResult describeVpcAttribute(DescribeVpcAttributeRequest describeVpcAttributeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Removes one or more egress rules from a security group for EC2-VPC.
* The values that you specify in the revoke request (for example, ports)
* must match the existing rule's values for the rule to be revoked.
*
*
* Each rule consists of the protocol and the CIDR range or source
* security group. For the TCP and UDP protocols, you must also specify
* the destination port or range of ports. For the ICMP protocol, you
* must also specify the ICMP type and code.
*
*
* Rule changes are propagated to instances within the security group as
* quickly as possible. However, a small delay might occur.
*
*
* @param revokeSecurityGroupEgressRequest Container for the necessary
* parameters to execute the RevokeSecurityGroupEgress service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void revokeSecurityGroupEgress(RevokeSecurityGroupEgressRequest revokeSecurityGroupEgressRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes the specified ingress or egress entry (rule) from the
* specified network ACL.
*
*
* @param deleteNetworkAclEntryRequest Container for the necessary
* parameters to execute the DeleteNetworkAclEntry service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteNetworkAclEntry(DeleteNetworkAclEntryRequest deleteNetworkAclEntryRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates an Amazon EBS volume that can be attached to an instance in
* the same Availability Zone. The volume is created in the specified
* region.
*
*
* You can create a new empty volume or restore a volume from an Amazon
* EBS snapshot. Any AWS Marketplace product codes from the snapshot are
* propagated to the volume.
*
*
* You can create encrypted volumes with the Encrypted
* parameter. Encrypted volumes may only be attached to instances that
* support Amazon EBS encryption. Volumes that are created from encrypted
* snapshots are also automatically encrypted. For more information, see
* Amazon EBS Encryption
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* For more information, see
* Creating or Restoring an Amazon EBS Volume
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param createVolumeRequest Container for the necessary parameters to
* execute the CreateVolume service method on AmazonEC2.
*
* @return The response from the CreateVolume service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateVolumeResult createVolume(CreateVolumeRequest createVolumeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the status of one or more instances, including any
* scheduled events.
*
*
* Instance status has two main components:
*
*
*
* -
* System Status reports impaired functionality that stems from issues
* related to the systems that support an instance, such as such as
* hardware failures and network connectivity problems. This call reports
* such problems as impaired reachability.
*
*
* -
* Instance Status reports impaired functionality that arises from
* problems internal to the instance. This call reports such problems as
* impaired reachability.
*
*
*
*
*
* Instance status provides information about four types of scheduled
* events for an instance that may require your attention:
*
*
*
* -
* Scheduled Reboot: When Amazon EC2 determines that an instance must be
* rebooted, the instances status returns one of two event codes:
* system-reboot or instance-reboot . System
* reboot commonly occurs if certain maintenance or upgrade operations
* require a reboot of the underlying host that supports an instance.
* Instance reboot commonly occurs if the instance must be rebooted,
* rather than the underlying host. Rebooting events include a scheduled
* start and end time.
*
*
* -
* System Maintenance: When Amazon EC2 determines that an instance
* requires maintenance that requires power or network impact, the
* instance status is the event code system-maintenance .
* System maintenance is either power maintenance or network maintenance.
* For power maintenance, your instance will be unavailable for a brief
* period of time and then rebooted. For network maintenance, your
* instance will experience a brief loss of network connectivity. System
* maintenance events include a scheduled start and end time. You will
* also be notified by email if one of your instances is set for system
* maintenance. The email message indicates when your instance is
* scheduled for maintenance.
*
*
* -
* Scheduled Retirement: When Amazon EC2 determines that an instance
* must be shut down, the instance status is the event code
* instance-retirement . Retirement commonly occurs when the
* underlying host is degraded and must be replaced. Retirement events
* include a scheduled start and end time. You will also be notified by
* email if one of your instances is set to retiring. The email message
* indicates when your instance will be permanently retired.
*
*
* -
* Scheduled Stop: When Amazon EC2 determines that an instance must be
* shut down, the instances status returns an event code called
* instance-stop . Stop events include a scheduled start and
* end time. You will also be notified by email if one of your instances
* is set to stop. The email message indicates when your instance will be
* stopped.
*
*
*
*
*
* When your instance is retired, it will either be terminated (if its
* root device type is the instance-store) or stopped (if its root device
* type is an EBS volume). Instances stopped due to retirement will not
* be restarted, but you can do so manually. You can also avoid
* retirement of EBS-backed instances by manually restarting your
* instance when its event code is instance-retirement .
* This ensures that your instance is started on a different underlying
* host.
*
*
* For more information about failed status checks, see
* Troubleshooting Instances with Failed Status Checks in the Amazon Elastic Compute Cloud User Guide . For more information about working with scheduled events, see Working with an Instance That Has a Scheduled Event
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param describeInstanceStatusRequest Container for the necessary
* parameters to execute the DescribeInstanceStatus service method on
* AmazonEC2.
*
* @return The response from the DescribeInstanceStatus service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeInstanceStatusResult describeInstanceStatus(DescribeInstanceStatusRequest describeInstanceStatusRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your virtual private gateways.
*
*
* For more information about virtual private gateways, see
* Adding an IPsec Hardware VPN to Your VPC
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param describeVpnGatewaysRequest Container for the necessary
* parameters to execute the DescribeVpnGateways service method on
* AmazonEC2.
*
* @return The response from the DescribeVpnGateways service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVpnGatewaysResult describeVpnGateways(DescribeVpnGatewaysRequest describeVpnGatewaysRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates a subnet in an existing VPC.
*
*
* When you create each subnet, you provide the VPC ID and the CIDR
* block you want for the subnet. After you create a subnet, you can't
* change its CIDR block. The subnet's CIDR block can be the same as the
* VPC's CIDR block (assuming you want only a single subnet in the VPC),
* or a subset of the VPC's CIDR block. If you create more than one
* subnet in a VPC, the subnets' CIDR blocks must not overlap. The
* smallest subnet (and VPC) you can create uses a /28 netmask (16 IP
* addresses), and the largest uses a /16 netmask (65,536 IP addresses).
*
*
* IMPORTANT: AWS reserves both the first four and the last IP
* address in each subnet's CIDR block. They're not available for use.
*
*
* If you add more than one subnet to a VPC, they're set up in a star
* topology with a logical router in the middle.
*
*
* For more information about subnets, see
* Your VPC and Subnets
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param createSubnetRequest Container for the necessary parameters to
* execute the CreateSubnet service method on AmazonEC2.
*
* @return The response from the CreateSubnet service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateSubnetResult createSubnet(CreateSubnetRequest createSubnetRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes Reserved Instance offerings that are available for
* purchase. With Reserved Instances, you purchase the right to launch
* instances for a period of time. During that time period, you do not
* receive insufficient capacity errors, and you pay a lower usage rate
* than the rate charged for On-Demand instances for the actual time
* used.
*
*
* For more information, see
* Reserved Instance Marketplace
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param describeReservedInstancesOfferingsRequest Container for the
* necessary parameters to execute the DescribeReservedInstancesOfferings
* service method on AmazonEC2.
*
* @return The response from the DescribeReservedInstancesOfferings
* service method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeReservedInstancesOfferingsResult describeReservedInstancesOfferings(DescribeReservedInstancesOfferingsRequest describeReservedInstancesOfferingsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Assigns one or more secondary private IP addresses to the specified
* network interface. You can specify one or more specific secondary IP
* addresses, or you can specify the number of secondary IP addresses to
* be automatically assigned within the subnet's CIDR block range. The
* number of secondary IP addresses that you can assign to an instance
* varies by instance type. For information about instance types, see
* Instance Types in the Amazon Elastic Compute Cloud User Guide . For more information about Elastic IP addresses, see Elastic IP Addresses
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* AssignPrivateIpAddresses is available only in EC2-VPC.
*
*
* @param assignPrivateIpAddressesRequest Container for the necessary
* parameters to execute the AssignPrivateIpAddresses service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void assignPrivateIpAddresses(AssignPrivateIpAddressesRequest assignPrivateIpAddressesRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes the specified snapshot.
*
*
* When you make periodic snapshots of a volume, the snapshots are
* incremental, and only the blocks on the device that have changed since
* your last snapshot are saved in the new snapshot. When you delete a
* snapshot, only the data not needed for any other snapshot is removed.
* So regardless of which prior snapshots have been deleted, all active
* snapshots will have access to all the information needed to restore
* the volume.
*
*
* You cannot delete a snapshot of the root device of an Amazon EBS
* volume used by a registered AMI. You must first de-register the AMI
* before you can delete the snapshot.
*
*
* For more information, see
* Deleting an Amazon EBS Snapshot
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param deleteSnapshotRequest Container for the necessary parameters to
* execute the DeleteSnapshot service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteSnapshot(DeleteSnapshotRequest deleteSnapshotRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Changes which network ACL a subnet is associated with. By default
* when you create a subnet, it's automatically associated with the
* default network ACL. For more information about network ACLs, see
* Network ACLs
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param replaceNetworkAclAssociationRequest Container for the necessary
* parameters to execute the ReplaceNetworkAclAssociation service method
* on AmazonEC2.
*
* @return The response from the ReplaceNetworkAclAssociation service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public ReplaceNetworkAclAssociationResult replaceNetworkAclAssociation(ReplaceNetworkAclAssociationRequest replaceNetworkAclAssociationRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Disassociates an Elastic IP address from the instance or network
* interface it's associated with.
*
*
* This is an idempotent operation. If you perform the operation more
* than once, Amazon EC2 doesn't return an error.
*
*
* @param disassociateAddressRequest Container for the necessary
* parameters to execute the DisassociateAddress service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void disassociateAddress(DisassociateAddressRequest disassociateAddressRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates a placement group that you launch cluster instances into. You
* must give the group a name that's unique within the scope of your
* account.
*
*
* For more information about placement groups and cluster instances,
* see
* Cluster Instances
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param createPlacementGroupRequest Container for the necessary
* parameters to execute the CreatePlacementGroup service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void createPlacementGroup(CreatePlacementGroupRequest createPlacementGroupRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Bundles an Amazon instance store-backed Windows instance.
*
*
* During bundling, only the root device volume (C:\) is bundled. Data
* on other instance store volumes is not preserved.
*
*
* NOTE: This procedure is not applicable for Linux/Unix
* instances or Windows instances that are backed by Amazon EBS.
*
*
* For more information, see
* Creating an Instance Store-Backed Windows AMI
* .
*
*
* @param bundleInstanceRequest Container for the necessary parameters to
* execute the BundleInstance service method on AmazonEC2.
*
* @return The response from the BundleInstance service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public BundleInstanceResult bundleInstance(BundleInstanceRequest bundleInstanceRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes the specified placement group. You must terminate all
* instances in the placement group before you can delete the placement
* group. For more information about placement groups and cluster
* instances, see
* Cluster Instances
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param deletePlacementGroupRequest Container for the necessary
* parameters to execute the DeletePlacementGroup service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deletePlacementGroup(DeletePlacementGroupRequest deletePlacementGroupRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes the specified VPC. You must detach or delete all gateways and
* resources that are associated with the VPC before you can delete it.
* For example, you must terminate all instances running in the VPC,
* delete all security groups associated with the VPC (except the default
* one), delete all route tables associated with the VPC (except the
* default one), and so on.
*
*
* @param deleteVpcRequest Container for the necessary parameters to
* execute the DeleteVpc service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteVpc(DeleteVpcRequest deleteVpcRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Copies a point-in-time snapshot of an Amazon EBS volume and stores it
* in Amazon S3. You can copy the snapshot within the same region or from
* one region to another. You can use the snapshot to create Amazon EBS
* volumes or Amazon Machine Images (AMIs). The snapshot is copied to the
* regional endpoint that you send the HTTP request to.
*
*
* Copies of encrypted Amazon EBS snapshots remain encrypted. Copies of
* unencrypted snapshots remain unencrypted.
*
*
* For more information, see
* Copying an Amazon EBS Snapshot
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param copySnapshotRequest Container for the necessary parameters to
* execute the CopySnapshot service method on AmazonEC2.
*
* @return The response from the CopySnapshot service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CopySnapshotResult copySnapshot(CopySnapshotRequest copySnapshotRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Acquires an Elastic IP address.
*
*
* An Elastic IP address is for use either in the EC2-Classic platform
* or in a VPC. For more information, see
* Elastic IP Addresses
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param allocateAddressRequest Container for the necessary parameters
* to execute the AllocateAddress service method on AmazonEC2.
*
* @return The response from the AllocateAddress service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public AllocateAddressResult allocateAddress(AllocateAddressRequest allocateAddressRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Releases the specified Elastic IP address.
*
*
* After releasing an Elastic IP address, it is released to the IP
* address pool and might be unavailable to you. Be sure to update your
* DNS records and any servers or devices that communicate with the
* address. If you attempt to release an Elastic IP address that you
* already released, you'll get an AuthFailure error if the
* address is already allocated to another AWS account.
*
*
* [EC2-Classic, default VPC] Releasing an Elastic IP address
* automatically disassociates it from any instance that it's associated
* with. To disassociate an Elastic IP address without releasing it, use
* DisassociateAddress.
*
*
* [Nondefault VPC] You must use the DisassociateAddress to disassociate
* the Elastic IP address before you try to release it. Otherwise, Amazon
* EC2 returns an error ( InvalidIPAddress.InUse ).
*
*
* @param releaseAddressRequest Container for the necessary parameters to
* execute the ReleaseAddress service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void releaseAddress(ReleaseAddressRequest releaseAddressRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Resets an attribute of an instance to its default value. To reset the
* kernel or RAM disk, the instance must be in a stopped state. To reset
* the SourceDestCheck , the instance can be either running
* or stopped.
*
*
* The SourceDestCheck attribute controls whether
* source/destination checking is enabled. The default value is
* true , which means checking is enabled. This value must
* be false for a NAT instance to perform NAT. For more
* information, see
* NAT Instances
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param resetInstanceAttributeRequest Container for the necessary
* parameters to execute the ResetInstanceAttribute service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void resetInstanceAttribute(ResetInstanceAttributeRequest resetInstanceAttributeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates a 2048-bit RSA key pair with the specified name. Amazon EC2
* stores the public key and displays the private key for you to save to
* a file. The private key is returned as an unencrypted PEM encoded
* PKCS#8 private key. If a key with the specified name already exists,
* Amazon EC2 returns an error.
*
*
* You can have up to five thousand key pairs per region.
*
*
* For more information about key pairs, see
* Key Pairs
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param createKeyPairRequest Container for the necessary parameters to
* execute the CreateKeyPair service method on AmazonEC2.
*
* @return The response from the CreateKeyPair service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateKeyPairResult createKeyPair(CreateKeyPairRequest createKeyPairRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Replaces an entry (rule) in a network ACL. For more information about
* network ACLs, see
* Network ACLs
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param replaceNetworkAclEntryRequest Container for the necessary
* parameters to execute the ReplaceNetworkAclEntry service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void replaceNetworkAclEntry(ReplaceNetworkAclEntryRequest replaceNetworkAclEntryRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of the Amazon EBS snapshots available to you.
* Available snapshots include public snapshots available for any AWS
* account to launch, private snapshots that you own, and private
* snapshots owned by another AWS account but for which you've been given
* explicit create volume permissions.
*
*
* The create volume permissions fall into the following categories:
*
*
*
* - public : The owner of the snapshot granted create volume
* permissions for the snapshot to the
all group. All AWS
* accounts have create volume permissions for these snapshots.
* - explicit : The owner of the snapshot granted create
* volume permissions to a specific AWS account.
* - implicit : An AWS account has implicit create volume
* permissions for all snapshots it owns.
*
*
*
* The list of snapshots returned can be modified by specifying snapshot
* IDs, snapshot owners, or AWS accounts with create volume permissions.
* If no options are specified, Amazon EC2 returns all snapshots for
* which you have create volume permissions.
*
*
* If you specify one or more snapshot IDs, only snapshots that have the
* specified IDs are returned. If you specify an invalid snapshot ID, an
* error is returned. If you specify a snapshot ID for which you do not
* have access, it is not included in the returned results.
*
*
* If you specify one or more snapshot owners, only snapshots from the
* specified owners and for which you have access are returned. The
* results can include the AWS account IDs of the specified owners,
* amazon for snapshots owned by Amazon, or
* self for snapshots that you own.
*
*
* If you specify a list of restorable users, only snapshots with create
* snapshot permissions for those users are returned. You can specify AWS
* account IDs (if you own the snapshots), self for
* snapshots for which you own or have explicit permissions, or
* all for public snapshots.
*
*
* For more information about Amazon EBS snapshots, see
* Amazon EBS Snapshots
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @param describeSnapshotsRequest Container for the necessary parameters
* to execute the DescribeSnapshots service method on AmazonEC2.
*
* @return The response from the DescribeSnapshots service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSnapshotsResult describeSnapshots(DescribeSnapshotsRequest describeSnapshotsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates a network ACL in a VPC. Network ACLs provide an optional
* layer of security (in addition to security groups) for the instances
* in your VPC.
*
*
* For more information about network ACLs, see
* Network ACLs
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param createNetworkAclRequest Container for the necessary parameters
* to execute the CreateNetworkAcl service method on AmazonEC2.
*
* @return The response from the CreateNetworkAcl service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateNetworkAclResult createNetworkAcl(CreateNetworkAclRequest createNetworkAclRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Registers an AMI. When you're creating an AMI, this is the final step
* you must complete before you can launch an instance from the AMI. For
* more information about creating AMIs, see
* Creating Your Own AMIs
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* NOTE: For Amazon EBS-backed instances, CreateImage creates and
* registers the AMI in a single request, so you don't have to register
* the AMI yourself.
*
*
* You can also use RegisterImage to create an Amazon
* EBS-backed AMI from a snapshot of a root device volume. For more
* information, see
* Launching an Instance from a Snapshot
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* If needed, you can deregister an AMI at any time. Any modifications
* you make to an AMI backed by an instance store volume invalidates its
* registration. If you make changes to an image, deregister the previous
* image and register the new image.
*
*
* NOTE: You can't register an image where a secondary (non-root)
* snapshot has AWS Marketplace product codes.
*
*
* @param registerImageRequest Container for the necessary parameters to
* execute the RegisterImage service method on AmazonEC2.
*
* @return The response from the RegisterImage service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public RegisterImageResult registerImage(RegisterImageRequest registerImageRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Resets a network interface attribute. You can specify only one
* attribute at a time.
*
*
* @param resetNetworkInterfaceAttributeRequest Container for the
* necessary parameters to execute the ResetNetworkInterfaceAttribute
* service method on AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void resetNetworkInterfaceAttribute(ResetNetworkInterfaceAttributeRequest resetNetworkInterfaceAttributeRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates a static route associated with a VPN connection between an
* existing virtual private gateway and a VPN customer gateway. The
* static route allows traffic to be routed from the virtual private
* gateway to the VPN customer gateway.
*
*
* For more information about VPN connections, see
* Adding a Hardware Virtual Private Gateway to Your VPC
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @param createVpnConnectionRouteRequest Container for the necessary
* parameters to execute the CreateVpnConnectionRoute service method on
* AmazonEC2.
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void createVpnConnectionRoute(CreateVpnConnectionRouteRequest createVpnConnectionRouteRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of the Reserved Instances that you purchased.
*
*
* For more information about Reserved Instances, see
* Reserved Instances
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @return The response from the DescribeReservedInstances service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeReservedInstancesResult describeReservedInstances() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of the Availability Zones that are available to
* you. The results include zones only for the region you're currently
* using. If there is an event impacting an Availability Zone, you can
* use this request to view the state and any provided message for that
* Availability Zone.
*
*
* For more information, see
* Regions and Availability Zones
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @return The response from the DescribeAvailabilityZones service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeAvailabilityZonesResult describeAvailabilityZones() throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes a security group.
*
*
* If you attempt to delete a security group that is associated with an
* instance, or is referenced by another security group, the operation
* fails with InvalidGroup.InUse in EC2-Classic or
* DependencyViolation in EC2-VPC.
*
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteSecurityGroup() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the Spot Price history. Spot Instances are instances that
* Amazon EC2 starts on your behalf when the maximum price that you
* specify exceeds the current Spot Price. Amazon EC2 periodically sets
* the Spot Price based on available Spot Instance capacity and current
* Spot Instance requests. For more information about Spot Instances, see
* Spot Instances
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* When you specify an Availability Zone, this operation describes the
* price history for the specified Availability Zone with the most recent
* set of prices listed first. If you don't specify an Availability Zone,
* you get the prices across all Availability Zones, starting with the
* most recent set. However, if you're using an API version earlier than
* 2011-05-15, you get the lowest price across the region for the
* specified time period. The prices returned are listed in chronological
* order, from the oldest to the most recent.
*
*
* @return The response from the DescribeSpotPriceHistory service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSpotPriceHistoryResult describeSpotPriceHistory() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your network interfaces.
*
*
* @return The response from the DescribeNetworkInterfaces service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeNetworkInterfacesResult describeNetworkInterfaces() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more regions that are currently available to you.
*
*
* For a list of the regions supported by Amazon EC2, see
* Regions and Endpoints
* .
*
*
* @return The response from the DescribeRegions service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeRegionsResult describeRegions() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your Internet gateways.
*
*
* @return The response from the DescribeInternetGateways service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeInternetGatewaysResult describeInternetGateways() throws AmazonServiceException, AmazonClientException;
/**
*
* Creates an import volume task using metadata from the specified disk
* image. After importing the image, you then upload it using the
* ec2-import-volume command in the Amazon EC2 command-line interface
* (CLI) tools. For more information, see
* Using the Command Line Tools to Import Your Virtual Machine to Amazon EC2
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @return The response from the ImportVolume service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public ImportVolumeResult importVolume() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your security groups.
*
*
* A security group is for use with instances either in the EC2-Classic
* platform or in a specific VPC. For more information, see
* Amazon EC2 Security Groups in the Amazon Elastic Compute Cloud User Guide and Security Groups for Your VPC
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @return The response from the DescribeSecurityGroups service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSecurityGroupsResult describeSecurityGroups() throws AmazonServiceException, AmazonClientException;
/**
*
* Rejects a VPC peering connection request. The VPC peering connection
* must be in the pending-acceptance state. Use the
* DescribeVpcPeeringConnections request to view your
* outstanding VPC peering connection requests.
*
*
* @return The response from the RejectVpcPeeringConnection service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public RejectVpcPeeringConnectionResult rejectVpcPeeringConnection() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the datafeed for Spot Instances. For more information, see
* Spot Instances
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @return The response from the DescribeSpotDatafeedSubscription service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSpotDatafeedSubscriptionResult describeSpotDatafeedSubscription() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the specified attribute of your AWS account.
*
*
* @return The response from the DescribeAccountAttributes service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeAccountAttributesResult describeAccountAttributes() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the status of the specified volumes. Volume status provides
* the result of the checks performed on your volumes to determine events
* that can impair the performance of your volumes. The performance of a
* volume can be affected if an issue occurs on the volume's underlying
* host. If the volume's underlying host experiences a power outage or
* system issue, after the system is restored, there could be data
* inconsistencies on the volume. Volume events notify you if this
* occurs. Volume actions notify you if any action needs to be taken in
* response to the event.
*
*
* The DescribeVolumeStatus operation provides the
* following information about the specified volumes:
*
*
* Status : Reflects the current status of the volume. The
* possible values are ok , impaired ,
* warning , or insufficient-data . If all
* checks pass, the overall status of the volume is ok . If
* the check fails, the overall status is impaired . If the
* status is insufficient-data , then the checks may still
* be taking place on your volume at the time. We recommend that you
* retry the request. For more information on volume status, see
* Monitoring the Status of Your Volumes
* .
*
*
* Events : Reflect the cause of a volume status and may require
* you to take action. For example, if your volume returns an
* impaired status, then the volume event might be
* potential-data-inconsistency . This means that your
* volume has been affected by an issue with the underlying host, has all
* I/O operations disabled, and may have inconsistent data.
*
*
* Actions : Reflect the actions you may have to take in response
* to an event. For example, if the status of the volume is
* impaired and the volume event shows
* potential-data-inconsistency , then the action shows
* enable-volume-io . This means that you may want to enable
* the I/O operations for the volume by calling the EnableVolumeIO action
* and then check the volume for data consistency.
*
*
* NOTE: Volume status is based on the volume status checks, and
* does not reflect the volume state. Therefore, volume status does not
* indicate volumes in the error state (for example, when a volume is
* incapable of accepting I/O.)
*
*
* @return The response from the DescribeVolumeStatus service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVolumeStatusResult describeVolumeStatus() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your VPN connections.
*
*
* For more information about VPN connections, see
* Adding a Hardware Virtual Private Gateway to Your VPC
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @return The response from the DescribeVpnConnections service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVpnConnectionsResult describeVpnConnections() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your VPCs.
*
*
* @return The response from the DescribeVpcs service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVpcsResult describeVpcs() throws AmazonServiceException, AmazonClientException;
/**
*
* Accept a VPC peering connection request. To accept a request, the VPC
* peering connection must be in the pending-acceptance
* state, and you must be the owner of the peer VPC. Use the
* DescribeVpcPeeringConnections request to view your
* outstanding VPC peering connection requests.
*
*
* @return The response from the AcceptVpcPeeringConnection service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public AcceptVpcPeeringConnectionResult acceptVpcPeeringConnection() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your export tasks.
*
*
* @return The response from the DescribeExportTasks service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeExportTasksResult describeExportTasks() throws AmazonServiceException, AmazonClientException;
/**
*
* Requests a VPC peering connection between two VPCs: a requester VPC
* that you own and a peer VPC with which to create the connection. The
* peer VPC can belong to another AWS account. The requester VPC and peer
* VPC cannot have overlapping CIDR blocks.
*
*
* The owner of the peer VPC must accept the peering request to activate
* the peering connection. The VPC peering connection request expires
* after 7 days, after which it cannot be accepted or rejected.
*
*
* A CreateVpcPeeringConnection request between VPCs with
* overlapping CIDR blocks results in the VPC peering connection having a
* status of failed .
*
*
* @return The response from the CreateVpcPeeringConnection service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateVpcPeeringConnectionResult createVpcPeeringConnection() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the specified Amazon EBS volumes.
*
*
* For more information about Amazon EBS volumes, see
* Amazon EBS Volumes
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @return The response from the DescribeVolumes service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVolumesResult describeVolumes() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes your account's Reserved Instance listings in the Reserved
* Instance Marketplace.
*
*
* For more information, see
* Reserved Instance Marketplace
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @return The response from the DescribeReservedInstancesListings
* service method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeReservedInstancesListingsResult describeReservedInstancesListings() throws AmazonServiceException, AmazonClientException;
/**
*
* Submits feedback about the status of an instance. The instance must
* be in the running state. If your experience with the
* instance differs from the instance status returned by
* DescribeInstanceStatus, use ReportInstanceStatus to report your
* experience with the instance. Amazon EC2 collects this information to
* improve the accuracy of status checks.
*
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void reportInstanceStatus() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your route tables.
*
*
* For more information about route tables, see
* Route Tables
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @return The response from the DescribeRouteTables service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeRouteTablesResult describeRouteTables() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your DHCP options sets.
*
*
* For more information about DHCP options sets, see
* DHCP Options Sets
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @return The response from the DescribeDhcpOptions service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeDhcpOptionsResult describeDhcpOptions() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your network ACLs.
*
*
* For more information about network ACLs, see
* Network ACLs
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @return The response from the DescribeNetworkAcls service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeNetworkAclsResult describeNetworkAcls() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your bundling tasks.
*
*
* NOTE: Completed bundle tasks are listed for only a limited
* time. If your bundle task is no longer in the list, you can still
* register an AMI from it. Just use RegisterImage with the Amazon S3
* bucket name and image manifest name you provided to the bundle task.
*
*
* @return The response from the DescribeBundleTasks service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeBundleTasksResult describeBundleTasks() throws AmazonServiceException, AmazonClientException;
/**
*
* Removes one or more ingress rules from a security group. The values
* that you specify in the revoke request (for example, ports) must match
* the existing rule's values for the rule to be removed.
*
*
* Each rule consists of the protocol and the CIDR range or source
* security group. For the TCP and UDP protocols, you must also specify
* the destination port or range of ports. For the ICMP protocol, you
* must also specify the ICMP type and code.
*
*
* Rule changes are propagated to instances within the security group as
* quickly as possible. However, a small delay might occur.
*
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void revokeSecurityGroupIngress() throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes a VPC peering connection. Either the owner of the requester
* VPC or the owner of the peer VPC can delete the VPC peering connection
* if it's in the active state. The owner of the requester
* VPC can delete a VPC peering connection in the
* pending-acceptance state.
*
*
* @return The response from the DeleteVpcPeeringConnection service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DeleteVpcPeeringConnectionResult deleteVpcPeeringConnection() throws AmazonServiceException, AmazonClientException;
/**
*
* Creates an Internet gateway for use with a VPC. After creating the
* Internet gateway, you attach it to a VPC using AttachInternetGateway.
*
*
* For more information about your VPC and Internet gateway, see the
* Amazon Virtual Private Cloud User Guide
* .
*
*
* @return The response from the CreateInternetGateway service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateInternetGatewayResult createInternetGateway() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your conversion tasks. For more information,
* see
* Using the Command Line Tools to Import Your Virtual Machine to Amazon EC2
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @return The response from the DescribeConversionTasks service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeConversionTasksResult describeConversionTasks() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your VPC peering connections.
*
*
* @return The response from the DescribeVpcPeeringConnections service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVpcPeeringConnectionsResult describeVpcPeeringConnections() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your subnets.
*
*
* For more information about subnets, see
* Your VPC and Subnets
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @return The response from the DescribeSubnets service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSubnetsResult describeSubnets() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your placement groups. For more information
* about placement groups and cluster instances, see
* Cluster Instances
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @return The response from the DescribePlacementGroups service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribePlacementGroupsResult describePlacementGroups() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your instances.
*
*
* If you specify one or more instance IDs, Amazon EC2 returns
* information for those instances. If you do not specify instance IDs,
* Amazon EC2 returns information for all relevant instances. If you
* specify an instance ID that is not valid, an error is returned. If you
* specify an instance that you do not own, it is not included in the
* returned results.
*
*
* Recently terminated instances might appear in the returned results.
* This interval is usually less than one hour.
*
*
* @return The response from the DescribeInstances service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeInstancesResult describeInstances() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of the images (AMIs, AKIs, and ARIs) available
* to you. Images available to you include public images, private images
* that you own, and private images owned by other AWS accounts but for
* which you have explicit launch permissions.
*
*
* NOTE: Deregistered images are included in the returned results
* for an unspecified interval after deregistration.
*
*
* @return The response from the DescribeImages service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeImagesResult describeImages() throws AmazonServiceException, AmazonClientException;
/**
*
* Adds one or more ingress rules to a security group.
*
*
* IMPORTANT: EC2-Classic: You can have up to 100 rules per
* group. EC2-VPC: You can have up to 50 rules per group (covering both
* ingress and egress rules).
*
*
* Rule changes are propagated to instances within the security group as
* quickly as possible. However, a small delay might occur.
*
*
* [EC2-Classic] This action gives one or more CIDR IP address ranges
* permission to access a security group in your account, or gives one or
* more security groups (called the source groups ) permission to
* access a security group for your account. A source group can be for
* your own AWS account, or another.
*
*
* [EC2-VPC] This action gives one or more CIDR IP address ranges
* permission to access a security group in your VPC, or gives one or
* more other security groups (called the source groups )
* permission to access a security group for your VPC. The security
* groups must all be for the same VPC.
*
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void authorizeSecurityGroupIngress() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the Spot Instance requests that belong to your account.
* Spot Instances are instances that Amazon EC2 starts on your behalf
* when the maximum price that you specify exceeds the current Spot
* Price. Amazon EC2 periodically sets the Spot Price based on available
* Spot Instance capacity and current Spot Instance requests. For more
* information about Spot Instances, see
* Spot Instances
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* You can use DescribeSpotInstanceRequests to find a
* running Spot Instance by examining the response. If the status of the
* Spot Instance is fulfilled , the instance ID appears in
* the response and contains the identifier of the instance.
* Alternatively, you can use DescribeInstances with a filter to look for
* instances where the instance lifecycle is spot .
*
*
* @return The response from the DescribeSpotInstanceRequests service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSpotInstanceRequestsResult describeSpotInstanceRequests() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your VPN customer gateways.
*
*
* For more information about VPN customer gateways, see
* Adding a Hardware Virtual Private Gateway to Your VPC
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @return The response from the DescribeCustomerGateways service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeCustomerGatewaysResult describeCustomerGateways() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of the tags for your EC2 resources.
*
*
* For more information about tags, see
* Tagging Your Resources
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @return The response from the DescribeTags service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeTagsResult describeTags() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the modifications made to your Reserved Instances. If no
* parameter is specified, information about all your Reserved Instances
* modification requests is returned. If a modification ID is specified,
* only information about the specific modification is returned.
*
*
* @return The response from the DescribeReservedInstancesModifications
* service method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeReservedInstancesModificationsResult describeReservedInstancesModifications() throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes the datafeed for Spot Instances. For more information, see
* Spot Instances
* in the Amazon Elastic Compute Cloud User Guide .
*
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteSpotDatafeedSubscription() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your Elastic IP addresses.
*
*
* An Elastic IP address is for use in either the EC2-Classic platform
* or in a VPC. For more information, see
* Elastic IP Addresses
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @return The response from the DescribeAddresses service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeAddressesResult describeAddresses() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your key pairs.
*
*
* For more information about key pairs, see
* Key Pairs
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @return The response from the DescribeKeyPairs service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeKeyPairsResult describeKeyPairs() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the status of one or more instances, including any
* scheduled events.
*
*
* Instance status has two main components:
*
*
*
* -
* System Status reports impaired functionality that stems from issues
* related to the systems that support an instance, such as such as
* hardware failures and network connectivity problems. This call reports
* such problems as impaired reachability.
*
*
* -
* Instance Status reports impaired functionality that arises from
* problems internal to the instance. This call reports such problems as
* impaired reachability.
*
*
*
*
*
* Instance status provides information about four types of scheduled
* events for an instance that may require your attention:
*
*
*
* -
* Scheduled Reboot: When Amazon EC2 determines that an instance must be
* rebooted, the instances status returns one of two event codes:
* system-reboot or instance-reboot . System
* reboot commonly occurs if certain maintenance or upgrade operations
* require a reboot of the underlying host that supports an instance.
* Instance reboot commonly occurs if the instance must be rebooted,
* rather than the underlying host. Rebooting events include a scheduled
* start and end time.
*
*
* -
* System Maintenance: When Amazon EC2 determines that an instance
* requires maintenance that requires power or network impact, the
* instance status is the event code system-maintenance .
* System maintenance is either power maintenance or network maintenance.
* For power maintenance, your instance will be unavailable for a brief
* period of time and then rebooted. For network maintenance, your
* instance will experience a brief loss of network connectivity. System
* maintenance events include a scheduled start and end time. You will
* also be notified by email if one of your instances is set for system
* maintenance. The email message indicates when your instance is
* scheduled for maintenance.
*
*
* -
* Scheduled Retirement: When Amazon EC2 determines that an instance
* must be shut down, the instance status is the event code
* instance-retirement . Retirement commonly occurs when the
* underlying host is degraded and must be replaced. Retirement events
* include a scheduled start and end time. You will also be notified by
* email if one of your instances is set to retiring. The email message
* indicates when your instance will be permanently retired.
*
*
* -
* Scheduled Stop: When Amazon EC2 determines that an instance must be
* shut down, the instances status returns an event code called
* instance-stop . Stop events include a scheduled start and
* end time. You will also be notified by email if one of your instances
* is set to stop. The email message indicates when your instance will be
* stopped.
*
*
*
*
*
* When your instance is retired, it will either be terminated (if its
* root device type is the instance-store) or stopped (if its root device
* type is an EBS volume). Instances stopped due to retirement will not
* be restarted, but you can do so manually. You can also avoid
* retirement of EBS-backed instances by manually restarting your
* instance when its event code is instance-retirement .
* This ensures that your instance is started on a different underlying
* host.
*
*
* For more information about failed status checks, see
* Troubleshooting Instances with Failed Status Checks in the Amazon Elastic Compute Cloud User Guide . For more information about working with scheduled events, see Working with an Instance That Has a Scheduled Event
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @return The response from the DescribeInstanceStatus service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeInstanceStatusResult describeInstanceStatus() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of your virtual private gateways.
*
*
* For more information about virtual private gateways, see
* Adding an IPsec Hardware VPN to Your VPC
* in the Amazon Virtual Private Cloud User Guide .
*
*
* @return The response from the DescribeVpnGateways service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVpnGatewaysResult describeVpnGateways() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes Reserved Instance offerings that are available for
* purchase. With Reserved Instances, you purchase the right to launch
* instances for a period of time. During that time period, you do not
* receive insufficient capacity errors, and you pay a lower usage rate
* than the rate charged for On-Demand instances for the actual time
* used.
*
*
* For more information, see
* Reserved Instance Marketplace
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @return The response from the DescribeReservedInstancesOfferings
* service method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeReservedInstancesOfferingsResult describeReservedInstancesOfferings() throws AmazonServiceException, AmazonClientException;
/**
*
* Disassociates an Elastic IP address from the instance or network
* interface it's associated with.
*
*
* This is an idempotent operation. If you perform the operation more
* than once, Amazon EC2 doesn't return an error.
*
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void disassociateAddress() throws AmazonServiceException, AmazonClientException;
/**
*
* Acquires an Elastic IP address.
*
*
* An Elastic IP address is for use either in the EC2-Classic platform
* or in a VPC. For more information, see
* Elastic IP Addresses
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @return The response from the AllocateAddress service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public AllocateAddressResult allocateAddress() throws AmazonServiceException, AmazonClientException;
/**
*
* Releases the specified Elastic IP address.
*
*
* After releasing an Elastic IP address, it is released to the IP
* address pool and might be unavailable to you. Be sure to update your
* DNS records and any servers or devices that communicate with the
* address. If you attempt to release an Elastic IP address that you
* already released, you'll get an AuthFailure error if the
* address is already allocated to another AWS account.
*
*
* [EC2-Classic, default VPC] Releasing an Elastic IP address
* automatically disassociates it from any instance that it's associated
* with. To disassociate an Elastic IP address without releasing it, use
* DisassociateAddress.
*
*
* [Nondefault VPC] You must use the DisassociateAddress to disassociate
* the Elastic IP address before you try to release it. Otherwise, Amazon
* EC2 returns an error ( InvalidIPAddress.InUse ).
*
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void releaseAddress() throws AmazonServiceException, AmazonClientException;
/**
*
* Describes one or more of the Amazon EBS snapshots available to you.
* Available snapshots include public snapshots available for any AWS
* account to launch, private snapshots that you own, and private
* snapshots owned by another AWS account but for which you've been given
* explicit create volume permissions.
*
*
* The create volume permissions fall into the following categories:
*
*
*
* - public : The owner of the snapshot granted create volume
* permissions for the snapshot to the
all group. All AWS
* accounts have create volume permissions for these snapshots.
* - explicit : The owner of the snapshot granted create
* volume permissions to a specific AWS account.
* - implicit : An AWS account has implicit create volume
* permissions for all snapshots it owns.
*
*
*
* The list of snapshots returned can be modified by specifying snapshot
* IDs, snapshot owners, or AWS accounts with create volume permissions.
* If no options are specified, Amazon EC2 returns all snapshots for
* which you have create volume permissions.
*
*
* If you specify one or more snapshot IDs, only snapshots that have the
* specified IDs are returned. If you specify an invalid snapshot ID, an
* error is returned. If you specify a snapshot ID for which you do not
* have access, it is not included in the returned results.
*
*
* If you specify one or more snapshot owners, only snapshots from the
* specified owners and for which you have access are returned. The
* results can include the AWS account IDs of the specified owners,
* amazon for snapshots owned by Amazon, or
* self for snapshots that you own.
*
*
* If you specify a list of restorable users, only snapshots with create
* snapshot permissions for those users are returned. You can specify AWS
* account IDs (if you own the snapshots), self for
* snapshots for which you own or have explicit permissions, or
* all for public snapshots.
*
*
* For more information about Amazon EBS snapshots, see
* Amazon EBS Snapshots
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* @return The response from the DescribeSnapshots service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSnapshotsResult describeSnapshots() throws AmazonServiceException, AmazonClientException;
/**
*
* Registers an AMI. When you're creating an AMI, this is the final step
* you must complete before you can launch an instance from the AMI. For
* more information about creating AMIs, see
* Creating Your Own AMIs
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* NOTE: For Amazon EBS-backed instances, CreateImage creates and
* registers the AMI in a single request, so you don't have to register
* the AMI yourself.
*
*
* You can also use RegisterImage to create an Amazon
* EBS-backed AMI from a snapshot of a root device volume. For more
* information, see
* Launching an Instance from a Snapshot
* in the Amazon Elastic Compute Cloud User Guide .
*
*
* If needed, you can deregister an AMI at any time. Any modifications
* you make to an AMI backed by an instance store volume invalidates its
* registration. If you make changes to an image, deregister the previous
* image and register the new image.
*
*
* NOTE: You can't register an image where a secondary (non-root)
* snapshot has AWS Marketplace product codes.
*
*
* @return The response from the RegisterImage service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public RegisterImageResult registerImage() throws AmazonServiceException, AmazonClientException;
/**
* Checks whether you have the required permissions for the provided
* AmazonEC2 operation, without actually running it. The returned
* DryRunResult object contains the information of whether the dry-run was
* successful. This method will throw exception when the service response
* does not clearly indicate whether you have the permission.
*
* @param request
* The request object for any AmazonEC2 operation suppored with
* dry-run.
*
* @return A DryRunResult object that contains the information of whether
* the dry-run was successful.
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client
* while attempting to make the request or handle the response.
* Or if the service response does not clearly indicate whether
* you have the permission.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server
* side issue.
*/
public DryRunResult dryRun(DryRunSupportedRequest request) throws AmazonServiceException, AmazonClientException;
/**
* Shuts down this client object, releasing any resources that might be held
* open. This is an optional method, and callers are not expected to call
* it, but can if they want to explicitly release any open resources. Once a
* client has been shutdown, it should not be used to make any more
* requests.
*/
public void shutdown();
/**
* Returns additional metadata for a previously executed successful request, typically used for
* debugging issues where a service isn't acting as expected. This data isn't considered part
* of the result data returned by an operation, so it's available through this separate,
* diagnostic interface.
*
* Response metadata is only cached for a limited period of time, so if you need to access
* this extra diagnostic information for an executed request, you should use this method
* to retrieve it as soon as possible after executing a request.
*
* @param request
* The originally executed request.
*
* @return The response metadata for the specified request, or null if none
* is available.
*/
public ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request);
}