com.amazonaws.services.cloudwatch.AmazonCloudWatchClient Maven / Gradle / Ivy
Show all versions of aws-java-sdk-cloudwatch Show documentation
/*
* Copyright 2015-2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with
* the License. A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions
* and limitations under the License.
*/
package com.amazonaws.services.cloudwatch;
import org.w3c.dom.*;
import java.net.*;
import java.util.*;
import javax.annotation.Generated;
import org.apache.commons.logging.*;
import com.amazonaws.*;
import com.amazonaws.annotation.SdkInternalApi;
import com.amazonaws.auth.*;
import com.amazonaws.handlers.*;
import com.amazonaws.http.*;
import com.amazonaws.internal.*;
import com.amazonaws.internal.auth.*;
import com.amazonaws.metrics.*;
import com.amazonaws.regions.*;
import com.amazonaws.transform.*;
import com.amazonaws.util.*;
import com.amazonaws.protocol.json.*;
import com.amazonaws.util.AWSRequestMetrics.Field;
import com.amazonaws.annotation.ThreadSafe;
import com.amazonaws.client.AwsSyncClientParams;
import com.amazonaws.client.builder.AdvancedConfig;
import com.amazonaws.services.cloudwatch.AmazonCloudWatchClientBuilder;
import com.amazonaws.services.cloudwatch.waiters.AmazonCloudWatchWaiters;
import com.amazonaws.AmazonServiceException;
import com.amazonaws.services.cloudwatch.model.*;
import com.amazonaws.services.cloudwatch.model.transform.*;
/**
* Client for accessing CloudWatch. All service calls made using this client are blocking, and will not return until the
* service call completes.
*
*
* Amazon CloudWatch monitors your Amazon Web Services (AWS) resources and the applications you run on AWS in real time.
* You can use CloudWatch to collect and track metrics, which are the variables you want to measure for your resources
* and applications.
*
*
* CloudWatch alarms send notifications or automatically change the resources you are monitoring based on rules that you
* define. For example, you can monitor the CPU usage and disk reads and writes of your Amazon EC2 instances. Then, use
* this data to determine whether you should launch additional instances to handle increased load. You can also use this
* data to stop under-used instances to save money.
*
*
* In addition to monitoring the built-in metrics that come with AWS, you can monitor your own custom metrics. With
* CloudWatch, you gain system-wide visibility into resource utilization, application performance, and operational
* health.
*
*/
@ThreadSafe
@Generated("com.amazonaws:aws-java-sdk-code-generator")
public class AmazonCloudWatchClient extends AmazonWebServiceClient implements AmazonCloudWatch {
/** Provider for AWS credentials. */
private final AWSCredentialsProvider awsCredentialsProvider;
private static final Log log = LogFactory.getLog(AmazonCloudWatch.class);
/** Default signing name for the service. */
private static final String DEFAULT_SIGNING_NAME = "monitoring";
private volatile AmazonCloudWatchWaiters waiters;
/** Client configuration factory providing ClientConfigurations tailored to this client */
protected static final ClientConfigurationFactory configFactory = new ClientConfigurationFactory();
private final AdvancedConfig advancedConfig;
/**
* List of exception unmarshallers for all modeled exceptions
*/
protected final List> exceptionUnmarshallers = new ArrayList>();
/**
* Constructs a new client to invoke service methods on CloudWatch. A credentials provider chain will be used that
* searches for credentials in this order:
*
* - Environment Variables - AWS_ACCESS_KEY_ID and AWS_SECRET_KEY
* - Java System Properties - aws.accessKeyId and aws.secretKey
* - Instance profile credentials delivered through the Amazon EC2 metadata service
*
*
*
* All service calls made using this new client object are blocking, and will not return until the service call
* completes.
*
* @see DefaultAWSCredentialsProviderChain
* @deprecated use {@link AmazonCloudWatchClientBuilder#defaultClient()}
*/
@Deprecated
public AmazonCloudWatchClient() {
this(DefaultAWSCredentialsProviderChain.getInstance(), configFactory.getConfig());
}
/**
* Constructs a new client to invoke service methods on CloudWatch. A credentials provider chain will be used that
* searches for credentials in this order:
*
* - Environment Variables - AWS_ACCESS_KEY_ID and AWS_SECRET_KEY
* - Java System Properties - aws.accessKeyId and aws.secretKey
* - Instance profile credentials delivered through the Amazon EC2 metadata service
*
*
*
* All service calls made using this new client object are blocking, and will not return until the service call
* completes.
*
* @param clientConfiguration
* The client configuration options controlling how this client connects to CloudWatch (ex: proxy settings,
* retry counts, etc.).
*
* @see DefaultAWSCredentialsProviderChain
* @deprecated use {@link AmazonCloudWatchClientBuilder#withClientConfiguration(ClientConfiguration)}
*/
@Deprecated
public AmazonCloudWatchClient(ClientConfiguration clientConfiguration) {
this(DefaultAWSCredentialsProviderChain.getInstance(), clientConfiguration);
}
/**
* Constructs a new client to invoke service methods on CloudWatch using the specified AWS account credentials.
*
*
* All service calls made using this new client object are blocking, and will not return until the service call
* completes.
*
* @param awsCredentials
* The AWS credentials (access key ID and secret key) to use when authenticating with AWS services.
* @deprecated use {@link AmazonCloudWatchClientBuilder#withCredentials(AWSCredentialsProvider)} for example:
* {@code AmazonCloudWatchClientBuilder.standard().withCredentials(new AWSStaticCredentialsProvider(awsCredentials)).build();}
*/
@Deprecated
public AmazonCloudWatchClient(AWSCredentials awsCredentials) {
this(awsCredentials, configFactory.getConfig());
}
/**
* Constructs a new client to invoke service methods on CloudWatch using the specified AWS account credentials and
* client configuration options.
*
*
* All service calls made using this new client object are blocking, and will not return until the service call
* completes.
*
* @param awsCredentials
* The AWS credentials (access key ID and secret key) to use when authenticating with AWS services.
* @param clientConfiguration
* The client configuration options controlling how this client connects to CloudWatch (ex: proxy settings,
* retry counts, etc.).
* @deprecated use {@link AmazonCloudWatchClientBuilder#withCredentials(AWSCredentialsProvider)} and
* {@link AmazonCloudWatchClientBuilder#withClientConfiguration(ClientConfiguration)}
*/
@Deprecated
public AmazonCloudWatchClient(AWSCredentials awsCredentials, ClientConfiguration clientConfiguration) {
super(clientConfiguration);
this.awsCredentialsProvider = new StaticCredentialsProvider(awsCredentials);
this.advancedConfig = AdvancedConfig.EMPTY;
init();
}
/**
* Constructs a new client to invoke service methods on CloudWatch using the specified AWS account credentials
* provider.
*
*
* All service calls made using this new client object are blocking, and will not return until the service call
* completes.
*
* @param awsCredentialsProvider
* The AWS credentials provider which will provide credentials to authenticate requests with AWS services.
* @deprecated use {@link AmazonCloudWatchClientBuilder#withCredentials(AWSCredentialsProvider)}
*/
@Deprecated
public AmazonCloudWatchClient(AWSCredentialsProvider awsCredentialsProvider) {
this(awsCredentialsProvider, configFactory.getConfig());
}
/**
* Constructs a new client to invoke service methods on CloudWatch using the specified AWS account credentials
* provider and client configuration options.
*
*
* All service calls made using this new client object are blocking, and will not return until the service call
* completes.
*
* @param awsCredentialsProvider
* The AWS credentials provider which will provide credentials to authenticate requests with AWS services.
* @param clientConfiguration
* The client configuration options controlling how this client connects to CloudWatch (ex: proxy settings,
* retry counts, etc.).
* @deprecated use {@link AmazonCloudWatchClientBuilder#withCredentials(AWSCredentialsProvider)} and
* {@link AmazonCloudWatchClientBuilder#withClientConfiguration(ClientConfiguration)}
*/
@Deprecated
public AmazonCloudWatchClient(AWSCredentialsProvider awsCredentialsProvider, ClientConfiguration clientConfiguration) {
this(awsCredentialsProvider, clientConfiguration, null);
}
/**
* Constructs a new client to invoke service methods on CloudWatch using the specified AWS account credentials
* provider, client configuration options, and request metric collector.
*
*
* All service calls made using this new client object are blocking, and will not return until the service call
* completes.
*
* @param awsCredentialsProvider
* The AWS credentials provider which will provide credentials to authenticate requests with AWS services.
* @param clientConfiguration
* The client configuration options controlling how this client connects to CloudWatch (ex: proxy settings,
* retry counts, etc.).
* @param requestMetricCollector
* optional request metric collector
* @deprecated use {@link AmazonCloudWatchClientBuilder#withCredentials(AWSCredentialsProvider)} and
* {@link AmazonCloudWatchClientBuilder#withClientConfiguration(ClientConfiguration)} and
* {@link AmazonCloudWatchClientBuilder#withMetricsCollector(RequestMetricCollector)}
*/
@Deprecated
public AmazonCloudWatchClient(AWSCredentialsProvider awsCredentialsProvider, ClientConfiguration clientConfiguration,
RequestMetricCollector requestMetricCollector) {
super(clientConfiguration, requestMetricCollector);
this.awsCredentialsProvider = awsCredentialsProvider;
this.advancedConfig = AdvancedConfig.EMPTY;
init();
}
public static AmazonCloudWatchClientBuilder builder() {
return AmazonCloudWatchClientBuilder.standard();
}
/**
* Constructs a new client to invoke service methods on CloudWatch using the specified parameters.
*
*
* All service calls made using this new client object are blocking, and will not return until the service call
* completes.
*
* @param clientParams
* Object providing client parameters.
*/
AmazonCloudWatchClient(AwsSyncClientParams clientParams) {
this(clientParams, false);
}
/**
* Constructs a new client to invoke service methods on CloudWatch using the specified parameters.
*
*
* All service calls made using this new client object are blocking, and will not return until the service call
* completes.
*
* @param clientParams
* Object providing client parameters.
*/
AmazonCloudWatchClient(AwsSyncClientParams clientParams, boolean endpointDiscoveryEnabled) {
super(clientParams);
this.awsCredentialsProvider = clientParams.getCredentialsProvider();
this.advancedConfig = clientParams.getAdvancedConfig();
init();
}
private void init() {
exceptionUnmarshallers.add(new ConcurrentModificationExceptionUnmarshaller());
exceptionUnmarshallers.add(new InvalidParameterValueExceptionUnmarshaller());
exceptionUnmarshallers.add(new InvalidFormatExceptionUnmarshaller());
exceptionUnmarshallers.add(new MissingRequiredParameterExceptionUnmarshaller());
exceptionUnmarshallers.add(new InvalidNextTokenExceptionUnmarshaller());
exceptionUnmarshallers.add(new LimitExceededExceptionUnmarshaller());
exceptionUnmarshallers.add(new ResourceNotFoundExceptionUnmarshaller());
exceptionUnmarshallers.add(new InvalidParameterCombinationExceptionUnmarshaller());
exceptionUnmarshallers.add(new DashboardNotFoundErrorExceptionUnmarshaller());
exceptionUnmarshallers.add(new DashboardInvalidInputErrorExceptionUnmarshaller());
exceptionUnmarshallers.add(new InternalServiceExceptionUnmarshaller());
exceptionUnmarshallers.add(new StandardErrorUnmarshaller(com.amazonaws.services.cloudwatch.model.AmazonCloudWatchException.class));
setServiceNameIntern(DEFAULT_SIGNING_NAME);
setEndpointPrefix(ENDPOINT_PREFIX);
// calling this.setEndPoint(...) will also modify the signer accordingly
this.setEndpoint("https://monitoring.us-east-1.amazonaws.com");
HandlerChainFactory chainFactory = new HandlerChainFactory();
requestHandler2s.addAll(chainFactory.newRequestHandlerChain("/com/amazonaws/services/cloudwatch/request.handlers"));
requestHandler2s.addAll(chainFactory.newRequestHandler2Chain("/com/amazonaws/services/cloudwatch/request.handler2s"));
requestHandler2s.addAll(chainFactory.getGlobalHandlers());
}
/**
*
* Deletes the specified alarms. You can delete up to 100 alarms in one operation. However, this total can include
* no more than one composite alarm. For example, you could delete 99 metric alarms and one composite alarms with
* one operation, but you can't delete two composite alarms with one operation.
*
*
* In the event of an error, no alarms are deleted.
*
*
*
* It is possible to create a loop or cycle of composite alarms, where composite alarm A depends on composite alarm
* B, and composite alarm B also depends on composite alarm A. In this scenario, you can't delete any composite
* alarm that is part of the cycle because there is always still a composite alarm that depends on that alarm that
* you want to delete.
*
*
* To get out of such a situation, you must break the cycle by changing the rule of one of the composite alarms in
* the cycle to remove a dependency that creates the cycle. The simplest change to make to break a cycle is to
* change the AlarmRule of one of the alarms to False.
*
*
* Additionally, the evaluation of composite alarms stops if CloudWatch detects a cycle in the evaluation path.
*
*
*
* @param deleteAlarmsRequest
* @return Result of the DeleteAlarms operation returned by the service.
* @throws ResourceNotFoundException
* The named resource does not exist.
* @sample AmazonCloudWatch.DeleteAlarms
* @see AWS API
* Documentation
*/
@Override
public DeleteAlarmsResult deleteAlarms(DeleteAlarmsRequest request) {
request = beforeClientExecution(request);
return executeDeleteAlarms(request);
}
@SdkInternalApi
final DeleteAlarmsResult executeDeleteAlarms(DeleteAlarmsRequest deleteAlarmsRequest) {
ExecutionContext executionContext = createExecutionContext(deleteAlarmsRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new DeleteAlarmsRequestMarshaller().marshall(super.beforeMarshalling(deleteAlarmsRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "DeleteAlarms");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(new DeleteAlarmsResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Deletes the specified anomaly detection model from your account.
*
*
* @param deleteAnomalyDetectorRequest
* @return Result of the DeleteAnomalyDetector operation returned by the service.
* @throws ResourceNotFoundException
* The named resource does not exist.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws MissingRequiredParameterException
* An input parameter that is required is missing.
* @sample AmazonCloudWatch.DeleteAnomalyDetector
* @see AWS API Documentation
*/
@Override
public DeleteAnomalyDetectorResult deleteAnomalyDetector(DeleteAnomalyDetectorRequest request) {
request = beforeClientExecution(request);
return executeDeleteAnomalyDetector(request);
}
@SdkInternalApi
final DeleteAnomalyDetectorResult executeDeleteAnomalyDetector(DeleteAnomalyDetectorRequest deleteAnomalyDetectorRequest) {
ExecutionContext executionContext = createExecutionContext(deleteAnomalyDetectorRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new DeleteAnomalyDetectorRequestMarshaller().marshall(super.beforeMarshalling(deleteAnomalyDetectorRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "DeleteAnomalyDetector");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new DeleteAnomalyDetectorResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Deletes all dashboards that you specify. You may specify up to 100 dashboards to delete. If there is an error
* during this call, no dashboards are deleted.
*
*
* @param deleteDashboardsRequest
* @return Result of the DeleteDashboards operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws DashboardNotFoundErrorException
* The specified dashboard does not exist.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @sample AmazonCloudWatch.DeleteDashboards
* @see AWS
* API Documentation
*/
@Override
public DeleteDashboardsResult deleteDashboards(DeleteDashboardsRequest request) {
request = beforeClientExecution(request);
return executeDeleteDashboards(request);
}
@SdkInternalApi
final DeleteDashboardsResult executeDeleteDashboards(DeleteDashboardsRequest deleteDashboardsRequest) {
ExecutionContext executionContext = createExecutionContext(deleteDashboardsRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new DeleteDashboardsRequestMarshaller().marshall(super.beforeMarshalling(deleteDashboardsRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "DeleteDashboards");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new DeleteDashboardsResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Permanently deletes the specified Contributor Insights rules.
*
*
* If you create a rule, delete it, and then re-create it with the same name, historical data from the first time
* the rule was created may or may not be available.
*
*
* @param deleteInsightRulesRequest
* @return Result of the DeleteInsightRules operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws MissingRequiredParameterException
* An input parameter that is required is missing.
* @sample AmazonCloudWatch.DeleteInsightRules
* @see AWS
* API Documentation
*/
@Override
public DeleteInsightRulesResult deleteInsightRules(DeleteInsightRulesRequest request) {
request = beforeClientExecution(request);
return executeDeleteInsightRules(request);
}
@SdkInternalApi
final DeleteInsightRulesResult executeDeleteInsightRules(DeleteInsightRulesRequest deleteInsightRulesRequest) {
ExecutionContext executionContext = createExecutionContext(deleteInsightRulesRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new DeleteInsightRulesRequestMarshaller().marshall(super.beforeMarshalling(deleteInsightRulesRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "DeleteInsightRules");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new DeleteInsightRulesResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Retrieves the history for the specified alarm. You can filter the results by date range or item type. If an alarm
* name is not specified, the histories for either all metric alarms or all composite alarms are returned.
*
*
* CloudWatch retains the history of an alarm even if you delete the alarm.
*
*
* @param describeAlarmHistoryRequest
* @return Result of the DescribeAlarmHistory operation returned by the service.
* @throws InvalidNextTokenException
* The next token specified is invalid.
* @sample AmazonCloudWatch.DescribeAlarmHistory
* @see AWS API Documentation
*/
@Override
public DescribeAlarmHistoryResult describeAlarmHistory(DescribeAlarmHistoryRequest request) {
request = beforeClientExecution(request);
return executeDescribeAlarmHistory(request);
}
@SdkInternalApi
final DescribeAlarmHistoryResult executeDescribeAlarmHistory(DescribeAlarmHistoryRequest describeAlarmHistoryRequest) {
ExecutionContext executionContext = createExecutionContext(describeAlarmHistoryRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new DescribeAlarmHistoryRequestMarshaller().marshall(super.beforeMarshalling(describeAlarmHistoryRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "DescribeAlarmHistory");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new DescribeAlarmHistoryResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
@Override
public DescribeAlarmHistoryResult describeAlarmHistory() {
return describeAlarmHistory(new DescribeAlarmHistoryRequest());
}
/**
*
* Retrieves the specified alarms. You can filter the results by specifying a a prefix for the alarm name, the alarm
* state, or a prefix for any action.
*
*
* @param describeAlarmsRequest
* @return Result of the DescribeAlarms operation returned by the service.
* @throws InvalidNextTokenException
* The next token specified is invalid.
* @sample AmazonCloudWatch.DescribeAlarms
* @see AWS API
* Documentation
*/
@Override
public DescribeAlarmsResult describeAlarms(DescribeAlarmsRequest request) {
request = beforeClientExecution(request);
return executeDescribeAlarms(request);
}
@SdkInternalApi
final DescribeAlarmsResult executeDescribeAlarms(DescribeAlarmsRequest describeAlarmsRequest) {
ExecutionContext executionContext = createExecutionContext(describeAlarmsRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new DescribeAlarmsRequestMarshaller().marshall(super.beforeMarshalling(describeAlarmsRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "DescribeAlarms");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new DescribeAlarmsResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
@Override
public DescribeAlarmsResult describeAlarms() {
return describeAlarms(new DescribeAlarmsRequest());
}
/**
*
* Retrieves the alarms for the specified metric. To filter the results, specify a statistic, period, or unit.
*
*
* @param describeAlarmsForMetricRequest
* @return Result of the DescribeAlarmsForMetric operation returned by the service.
* @sample AmazonCloudWatch.DescribeAlarmsForMetric
* @see AWS API Documentation
*/
@Override
public DescribeAlarmsForMetricResult describeAlarmsForMetric(DescribeAlarmsForMetricRequest request) {
request = beforeClientExecution(request);
return executeDescribeAlarmsForMetric(request);
}
@SdkInternalApi
final DescribeAlarmsForMetricResult executeDescribeAlarmsForMetric(DescribeAlarmsForMetricRequest describeAlarmsForMetricRequest) {
ExecutionContext executionContext = createExecutionContext(describeAlarmsForMetricRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new DescribeAlarmsForMetricRequestMarshaller().marshall(super.beforeMarshalling(describeAlarmsForMetricRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "DescribeAlarmsForMetric");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new DescribeAlarmsForMetricResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Lists the anomaly detection models that you have created in your account. You can list all models in your account
* or filter the results to only the models that are related to a certain namespace, metric name, or metric
* dimension.
*
*
* @param describeAnomalyDetectorsRequest
* @return Result of the DescribeAnomalyDetectors operation returned by the service.
* @throws InvalidNextTokenException
* The next token specified is invalid.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @sample AmazonCloudWatch.DescribeAnomalyDetectors
* @see AWS API Documentation
*/
@Override
public DescribeAnomalyDetectorsResult describeAnomalyDetectors(DescribeAnomalyDetectorsRequest request) {
request = beforeClientExecution(request);
return executeDescribeAnomalyDetectors(request);
}
@SdkInternalApi
final DescribeAnomalyDetectorsResult executeDescribeAnomalyDetectors(DescribeAnomalyDetectorsRequest describeAnomalyDetectorsRequest) {
ExecutionContext executionContext = createExecutionContext(describeAnomalyDetectorsRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new DescribeAnomalyDetectorsRequestMarshaller().marshall(super.beforeMarshalling(describeAnomalyDetectorsRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "DescribeAnomalyDetectors");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new DescribeAnomalyDetectorsResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Returns a list of all the Contributor Insights rules in your account. All rules in your account are returned with
* a single operation.
*
*
* For more information about Contributor Insights, see Using Contributor
* Insights to Analyze High-Cardinality Data.
*
*
* @param describeInsightRulesRequest
* @return Result of the DescribeInsightRules operation returned by the service.
* @throws InvalidNextTokenException
* The next token specified is invalid.
* @sample AmazonCloudWatch.DescribeInsightRules
* @see AWS API Documentation
*/
@Override
public DescribeInsightRulesResult describeInsightRules(DescribeInsightRulesRequest request) {
request = beforeClientExecution(request);
return executeDescribeInsightRules(request);
}
@SdkInternalApi
final DescribeInsightRulesResult executeDescribeInsightRules(DescribeInsightRulesRequest describeInsightRulesRequest) {
ExecutionContext executionContext = createExecutionContext(describeInsightRulesRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new DescribeInsightRulesRequestMarshaller().marshall(super.beforeMarshalling(describeInsightRulesRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "DescribeInsightRules");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new DescribeInsightRulesResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Disables the actions for the specified alarms. When an alarm's actions are disabled, the alarm actions do not
* execute when the alarm state changes.
*
*
* @param disableAlarmActionsRequest
* @return Result of the DisableAlarmActions operation returned by the service.
* @sample AmazonCloudWatch.DisableAlarmActions
* @see AWS
* API Documentation
*/
@Override
public DisableAlarmActionsResult disableAlarmActions(DisableAlarmActionsRequest request) {
request = beforeClientExecution(request);
return executeDisableAlarmActions(request);
}
@SdkInternalApi
final DisableAlarmActionsResult executeDisableAlarmActions(DisableAlarmActionsRequest disableAlarmActionsRequest) {
ExecutionContext executionContext = createExecutionContext(disableAlarmActionsRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new DisableAlarmActionsRequestMarshaller().marshall(super.beforeMarshalling(disableAlarmActionsRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "DisableAlarmActions");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new DisableAlarmActionsResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Disables the specified Contributor Insights rules. When rules are disabled, they do not analyze log groups and do
* not incur costs.
*
*
* @param disableInsightRulesRequest
* @return Result of the DisableInsightRules operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws MissingRequiredParameterException
* An input parameter that is required is missing.
* @sample AmazonCloudWatch.DisableInsightRules
* @see AWS
* API Documentation
*/
@Override
public DisableInsightRulesResult disableInsightRules(DisableInsightRulesRequest request) {
request = beforeClientExecution(request);
return executeDisableInsightRules(request);
}
@SdkInternalApi
final DisableInsightRulesResult executeDisableInsightRules(DisableInsightRulesRequest disableInsightRulesRequest) {
ExecutionContext executionContext = createExecutionContext(disableInsightRulesRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new DisableInsightRulesRequestMarshaller().marshall(super.beforeMarshalling(disableInsightRulesRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "DisableInsightRules");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new DisableInsightRulesResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Enables the actions for the specified alarms.
*
*
* @param enableAlarmActionsRequest
* @return Result of the EnableAlarmActions operation returned by the service.
* @sample AmazonCloudWatch.EnableAlarmActions
* @see AWS
* API Documentation
*/
@Override
public EnableAlarmActionsResult enableAlarmActions(EnableAlarmActionsRequest request) {
request = beforeClientExecution(request);
return executeEnableAlarmActions(request);
}
@SdkInternalApi
final EnableAlarmActionsResult executeEnableAlarmActions(EnableAlarmActionsRequest enableAlarmActionsRequest) {
ExecutionContext executionContext = createExecutionContext(enableAlarmActionsRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new EnableAlarmActionsRequestMarshaller().marshall(super.beforeMarshalling(enableAlarmActionsRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "EnableAlarmActions");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new EnableAlarmActionsResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Enables the specified Contributor Insights rules. When rules are enabled, they immediately begin analyzing log
* data.
*
*
* @param enableInsightRulesRequest
* @return Result of the EnableInsightRules operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws MissingRequiredParameterException
* An input parameter that is required is missing.
* @throws LimitExceededException
* The operation exceeded one or more limits.
* @sample AmazonCloudWatch.EnableInsightRules
* @see AWS
* API Documentation
*/
@Override
public EnableInsightRulesResult enableInsightRules(EnableInsightRulesRequest request) {
request = beforeClientExecution(request);
return executeEnableInsightRules(request);
}
@SdkInternalApi
final EnableInsightRulesResult executeEnableInsightRules(EnableInsightRulesRequest enableInsightRulesRequest) {
ExecutionContext executionContext = createExecutionContext(enableInsightRulesRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new EnableInsightRulesRequestMarshaller().marshall(super.beforeMarshalling(enableInsightRulesRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "EnableInsightRules");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new EnableInsightRulesResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Displays the details of the dashboard that you specify.
*
*
* To copy an existing dashboard, use GetDashboard, and then use the data returned within
* DashboardBody as the template for the new dashboard when you call PutDashboard to
* create the copy.
*
*
* @param getDashboardRequest
* @return Result of the GetDashboard operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws DashboardNotFoundErrorException
* The specified dashboard does not exist.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @sample AmazonCloudWatch.GetDashboard
* @see AWS API
* Documentation
*/
@Override
public GetDashboardResult getDashboard(GetDashboardRequest request) {
request = beforeClientExecution(request);
return executeGetDashboard(request);
}
@SdkInternalApi
final GetDashboardResult executeGetDashboard(GetDashboardRequest getDashboardRequest) {
ExecutionContext executionContext = createExecutionContext(getDashboardRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new GetDashboardRequestMarshaller().marshall(super.beforeMarshalling(getDashboardRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "GetDashboard");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(new GetDashboardResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation returns the time series data collected by a Contributor Insights rule. The data includes the
* identity and number of contributors to the log group.
*
*
* You can also optionally return one or more statistics about each data point in the time series. These statistics
* can include the following:
*
*
* -
*
* UniqueContributors -- the number of unique contributors for each data point.
*
*
* -
*
* MaxContributorValue -- the value of the top contributor for each data point. The identity of the
* contributor may change for each data point in the graph.
*
*
* If this rule aggregates by COUNT, the top contributor for each data point is the contributor with the most
* occurrences in that period. If the rule aggregates by SUM, the top contributor is the contributor with the
* highest sum in the log field specified by the rule's Value, during that period.
*
*
* -
*
* SampleCount -- the number of data points matched by the rule.
*
*
* -
*
* Sum -- the sum of the values from all contributors during the time period represented by that data
* point.
*
*
* -
*
* Minimum -- the minimum value from a single observation during the time period represented by that
* data point.
*
*
* -
*
* Maximum -- the maximum value from a single observation during the time period represented by that
* data point.
*
*
* -
*
* Average -- the average value from all contributors during the time period represented by that data
* point.
*
*
*
*
* @param getInsightRuleReportRequest
* @return Result of the GetInsightRuleReport operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws MissingRequiredParameterException
* An input parameter that is required is missing.
* @throws ResourceNotFoundException
* The named resource does not exist.
* @sample AmazonCloudWatch.GetInsightRuleReport
* @see AWS API Documentation
*/
@Override
public GetInsightRuleReportResult getInsightRuleReport(GetInsightRuleReportRequest request) {
request = beforeClientExecution(request);
return executeGetInsightRuleReport(request);
}
@SdkInternalApi
final GetInsightRuleReportResult executeGetInsightRuleReport(GetInsightRuleReportRequest getInsightRuleReportRequest) {
ExecutionContext executionContext = createExecutionContext(getInsightRuleReportRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new GetInsightRuleReportRequestMarshaller().marshall(super.beforeMarshalling(getInsightRuleReportRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "GetInsightRuleReport");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new GetInsightRuleReportResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* You can use the GetMetricData API to retrieve as many as 500 different metrics in a single request,
* with a total of as many as 100,800 data points. You can also optionally perform math expressions on the values of
* the returned statistics, to create new time series that represent new insights into your data. For example, using
* Lambda metrics, you could divide the Errors metric by the Invocations metric to get an error rate time series.
* For more information about metric math expressions, see Metric Math Syntax and Functions in the Amazon CloudWatch User Guide.
*
*
* Calls to the GetMetricData API have a different pricing structure than calls to
* GetMetricStatistics. For more information about pricing, see Amazon CloudWatch Pricing.
*
*
* Amazon CloudWatch retains metric data as follows:
*
*
* -
*
* Data points with a period of less than 60 seconds are available for 3 hours. These data points are
* high-resolution metrics and are available only for custom metrics that have been defined with a
* StorageResolution of 1.
*
*
* -
*
* Data points with a period of 60 seconds (1-minute) are available for 15 days.
*
*
* -
*
* Data points with a period of 300 seconds (5-minute) are available for 63 days.
*
*
* -
*
* Data points with a period of 3600 seconds (1 hour) are available for 455 days (15 months).
*
*
*
*
* Data points that are initially published with a shorter period are aggregated together for long-term storage. For
* example, if you collect data using a period of 1 minute, the data remains available for 15 days with 1-minute
* resolution. After 15 days, this data is still available, but is aggregated and retrievable only with a resolution
* of 5 minutes. After 63 days, the data is further aggregated and is available with a resolution of 1 hour.
*
*
* If you omit Unit in your request, all data that was collected with any unit is returned, along with
* the corresponding units that were specified when the data was reported to CloudWatch. If you specify a unit, the
* operation returns only data data that was collected with that unit specified. If you specify a unit that does not
* match the data collected, the results of the operation are null. CloudWatch does not perform unit conversions.
*
*
* @param getMetricDataRequest
* @return Result of the GetMetricData operation returned by the service.
* @throws InvalidNextTokenException
* The next token specified is invalid.
* @sample AmazonCloudWatch.GetMetricData
* @see AWS API
* Documentation
*/
@Override
public GetMetricDataResult getMetricData(GetMetricDataRequest request) {
request = beforeClientExecution(request);
return executeGetMetricData(request);
}
@SdkInternalApi
final GetMetricDataResult executeGetMetricData(GetMetricDataRequest getMetricDataRequest) {
ExecutionContext executionContext = createExecutionContext(getMetricDataRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new GetMetricDataRequestMarshaller().marshall(super.beforeMarshalling(getMetricDataRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "GetMetricData");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(new GetMetricDataResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Gets statistics for the specified metric.
*
*
* The maximum number of data points returned from a single call is 1,440. If you request more than 1,440 data
* points, CloudWatch returns an error. To reduce the number of data points, you can narrow the specified time range
* and make multiple requests across adjacent time ranges, or you can increase the specified period. Data points are
* not returned in chronological order.
*
*
* CloudWatch aggregates data points based on the length of the period that you specify. For example, if you request
* statistics with a one-hour period, CloudWatch aggregates all data points with time stamps that fall within each
* one-hour period. Therefore, the number of values aggregated by CloudWatch is larger than the number of data
* points returned.
*
*
* CloudWatch needs raw data points to calculate percentile statistics. If you publish data using a statistic set
* instead, you can only retrieve percentile statistics for this data if one of the following conditions is true:
*
*
* -
*
* The SampleCount value of the statistic set is 1.
*
*
* -
*
* The Min and the Max values of the statistic set are equal.
*
*
*
*
* Percentile statistics are not available for metrics when any of the metric values are negative numbers.
*
*
* Amazon CloudWatch retains metric data as follows:
*
*
* -
*
* Data points with a period of less than 60 seconds are available for 3 hours. These data points are
* high-resolution metrics and are available only for custom metrics that have been defined with a
* StorageResolution of 1.
*
*
* -
*
* Data points with a period of 60 seconds (1-minute) are available for 15 days.
*
*
* -
*
* Data points with a period of 300 seconds (5-minute) are available for 63 days.
*
*
* -
*
* Data points with a period of 3600 seconds (1 hour) are available for 455 days (15 months).
*
*
*
*
* Data points that are initially published with a shorter period are aggregated together for long-term storage. For
* example, if you collect data using a period of 1 minute, the data remains available for 15 days with 1-minute
* resolution. After 15 days, this data is still available, but is aggregated and retrievable only with a resolution
* of 5 minutes. After 63 days, the data is further aggregated and is available with a resolution of 1 hour.
*
*
* CloudWatch started retaining 5-minute and 1-hour metric data as of July 9, 2016.
*
*
* For information about metrics and dimensions supported by AWS services, see the Amazon CloudWatch
* Metrics and Dimensions Reference in the Amazon CloudWatch User Guide.
*
*
* @param getMetricStatisticsRequest
* @return Result of the GetMetricStatistics operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws MissingRequiredParameterException
* An input parameter that is required is missing.
* @throws InvalidParameterCombinationException
* Parameters were used together that cannot be used together.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @sample AmazonCloudWatch.GetMetricStatistics
* @see AWS
* API Documentation
*/
@Override
public GetMetricStatisticsResult getMetricStatistics(GetMetricStatisticsRequest request) {
request = beforeClientExecution(request);
return executeGetMetricStatistics(request);
}
@SdkInternalApi
final GetMetricStatisticsResult executeGetMetricStatistics(GetMetricStatisticsRequest getMetricStatisticsRequest) {
ExecutionContext executionContext = createExecutionContext(getMetricStatisticsRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new GetMetricStatisticsRequestMarshaller().marshall(super.beforeMarshalling(getMetricStatisticsRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "GetMetricStatistics");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new GetMetricStatisticsResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* You can use the GetMetricWidgetImage API to retrieve a snapshot graph of one or more Amazon
* CloudWatch metrics as a bitmap image. You can then embed this image into your services and products, such as wiki
* pages, reports, and documents. You could also retrieve images regularly, such as every minute, and create your
* own custom live dashboard.
*
*
* The graph you retrieve can include all CloudWatch metric graph features, including metric math and horizontal and
* vertical annotations.
*
*
* There is a limit of 20 transactions per second for this API. Each GetMetricWidgetImage action has
* the following limits:
*
*
* -
*
* As many as 100 metrics in the graph.
*
*
* -
*
* Up to 100 KB uncompressed payload.
*
*
*
*
* @param getMetricWidgetImageRequest
* @return Result of the GetMetricWidgetImage operation returned by the service.
* @sample AmazonCloudWatch.GetMetricWidgetImage
* @see AWS API Documentation
*/
@Override
public GetMetricWidgetImageResult getMetricWidgetImage(GetMetricWidgetImageRequest request) {
request = beforeClientExecution(request);
return executeGetMetricWidgetImage(request);
}
@SdkInternalApi
final GetMetricWidgetImageResult executeGetMetricWidgetImage(GetMetricWidgetImageRequest getMetricWidgetImageRequest) {
ExecutionContext executionContext = createExecutionContext(getMetricWidgetImageRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new GetMetricWidgetImageRequestMarshaller().marshall(super.beforeMarshalling(getMetricWidgetImageRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "GetMetricWidgetImage");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new GetMetricWidgetImageResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Returns a list of the dashboards for your account. If you include DashboardNamePrefix, only those
* dashboards with names starting with the prefix are listed. Otherwise, all dashboards in your account are listed.
*
*
* ListDashboards returns up to 1000 results on one page. If there are more than 1000 dashboards, you
* can call ListDashboards again and include the value you received for NextToken in the
* first call, to receive the next 1000 results.
*
*
* @param listDashboardsRequest
* @return Result of the ListDashboards operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @sample AmazonCloudWatch.ListDashboards
* @see AWS API
* Documentation
*/
@Override
public ListDashboardsResult listDashboards(ListDashboardsRequest request) {
request = beforeClientExecution(request);
return executeListDashboards(request);
}
@SdkInternalApi
final ListDashboardsResult executeListDashboards(ListDashboardsRequest listDashboardsRequest) {
ExecutionContext executionContext = createExecutionContext(listDashboardsRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new ListDashboardsRequestMarshaller().marshall(super.beforeMarshalling(listDashboardsRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "ListDashboards");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new ListDashboardsResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* List the specified metrics. You can use the returned metrics with GetMetricData
* or
* GetMetricStatistics to obtain statistical data.
*
*
* Up to 500 results are returned for any one call. To retrieve additional results, use the returned token with
* subsequent calls.
*
*
* After you create a metric, allow up to fifteen minutes before the metric appears. Statistics about the metric,
* however, are available sooner using GetMetricData
* or
* GetMetricStatistics.
*
*
* @param listMetricsRequest
* @return Result of the ListMetrics operation returned by the service.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @sample AmazonCloudWatch.ListMetrics
* @see AWS API
* Documentation
*/
@Override
public ListMetricsResult listMetrics(ListMetricsRequest request) {
request = beforeClientExecution(request);
return executeListMetrics(request);
}
@SdkInternalApi
final ListMetricsResult executeListMetrics(ListMetricsRequest listMetricsRequest) {
ExecutionContext executionContext = createExecutionContext(listMetricsRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new ListMetricsRequestMarshaller().marshall(super.beforeMarshalling(listMetricsRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "ListMetrics");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(new ListMetricsResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
@Override
public ListMetricsResult listMetrics() {
return listMetrics(new ListMetricsRequest());
}
/**
*
* Displays the tags associated with a CloudWatch resource. Alarms support tagging.
*
*
* @param listTagsForResourceRequest
* @return Result of the ListTagsForResource operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws ResourceNotFoundException
* The named resource does not exist.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @sample AmazonCloudWatch.ListTagsForResource
* @see AWS
* API Documentation
*/
@Override
public ListTagsForResourceResult listTagsForResource(ListTagsForResourceRequest request) {
request = beforeClientExecution(request);
return executeListTagsForResource(request);
}
@SdkInternalApi
final ListTagsForResourceResult executeListTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest) {
ExecutionContext executionContext = createExecutionContext(listTagsForResourceRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new ListTagsForResourceRequestMarshaller().marshall(super.beforeMarshalling(listTagsForResourceRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "ListTagsForResource");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new ListTagsForResourceResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Creates an anomaly detection model for a CloudWatch metric. You can use the model to display a band of expected
* normal values when the metric is graphed.
*
*
* For more information, see CloudWatch Anomaly Detection.
*
*
* @param putAnomalyDetectorRequest
* @return Result of the PutAnomalyDetector operation returned by the service.
* @throws LimitExceededException
* The operation exceeded one or more limits.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws MissingRequiredParameterException
* An input parameter that is required is missing.
* @sample AmazonCloudWatch.PutAnomalyDetector
* @see AWS
* API Documentation
*/
@Override
public PutAnomalyDetectorResult putAnomalyDetector(PutAnomalyDetectorRequest request) {
request = beforeClientExecution(request);
return executePutAnomalyDetector(request);
}
@SdkInternalApi
final PutAnomalyDetectorResult executePutAnomalyDetector(PutAnomalyDetectorRequest putAnomalyDetectorRequest) {
ExecutionContext executionContext = createExecutionContext(putAnomalyDetectorRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new PutAnomalyDetectorRequestMarshaller().marshall(super.beforeMarshalling(putAnomalyDetectorRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "PutAnomalyDetector");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new PutAnomalyDetectorResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Creates or updates a composite alarm. When you create a composite alarm, you specify a rule expression for
* the alarm that takes into account the alarm states of other alarms that you have created. The composite alarm
* goes into ALARM state only if all conditions of the rule are met.
*
*
* The alarms specified in a composite alarm's rule expression can include metric alarms and other composite alarms.
*
*
* Using composite alarms can reduce alarm noise. You can create multiple metric alarms, and also create a composite
* alarm and set up alerts only for the composite alarm. For example, you could create a composite alarm that goes
* into ALARM state only when more than one of the underlying metric alarms are in ALARM state.
*
*
* Currently, the only alarm actions that can be taken by composite alarms are notifying SNS topics.
*
*
*
* It is possible to create a loop or cycle of composite alarms, where composite alarm A depends on composite alarm
* B, and composite alarm B also depends on composite alarm A. In this scenario, you can't delete any composite
* alarm that is part of the cycle because there is always still a composite alarm that depends on that alarm that
* you want to delete.
*
*
* To get out of such a situation, you must break the cycle by changing the rule of one of the composite alarms in
* the cycle to remove a dependency that creates the cycle. The simplest change to make to break a cycle is to
* change the AlarmRule of one of the alarms to False.
*
*
* Additionally, the evaluation of composite alarms stops if CloudWatch detects a cycle in the evaluation path.
*
*
*
* When this operation creates an alarm, the alarm state is immediately set to INSUFFICIENT_DATA. The
* alarm is then evaluated and its state is set appropriately. Any actions associated with the new state are then
* executed. For a composite alarm, this initial time after creation is the only time that the alarm can be in
* INSUFFICIENT_DATA state.
*
*
* When you update an existing alarm, its state is left unchanged, but the update completely overwrites the previous
* configuration of the alarm.
*
*
* @param putCompositeAlarmRequest
* @return Result of the PutCompositeAlarm operation returned by the service.
* @throws LimitExceededException
* The quota for alarms for this customer has already been reached.
* @sample AmazonCloudWatch.PutCompositeAlarm
* @see AWS
* API Documentation
*/
@Override
public PutCompositeAlarmResult putCompositeAlarm(PutCompositeAlarmRequest request) {
request = beforeClientExecution(request);
return executePutCompositeAlarm(request);
}
@SdkInternalApi
final PutCompositeAlarmResult executePutCompositeAlarm(PutCompositeAlarmRequest putCompositeAlarmRequest) {
ExecutionContext executionContext = createExecutionContext(putCompositeAlarmRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new PutCompositeAlarmRequestMarshaller().marshall(super.beforeMarshalling(putCompositeAlarmRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "PutCompositeAlarm");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new PutCompositeAlarmResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Creates a dashboard if it does not already exist, or updates an existing dashboard. If you update a dashboard,
* the entire contents are replaced with what you specify here.
*
*
* All dashboards in your account are global, not region-specific.
*
*
* A simple way to create a dashboard using PutDashboard is to copy an existing dashboard. To copy an
* existing dashboard using the console, you can load the dashboard and then use the View/edit source command in the
* Actions menu to display the JSON block for that dashboard. Another way to copy a dashboard is to use
* GetDashboard, and then use the data returned within DashboardBody as the template for
* the new dashboard when you call PutDashboard.
*
*
* When you create a dashboard with PutDashboard, a good practice is to add a text widget at the top of
* the dashboard with a message that the dashboard was created by script and should not be changed in the console.
* This message could also point console users to the location of the DashboardBody script or the
* CloudFormation template used to create the dashboard.
*
*
* @param putDashboardRequest
* @return Result of the PutDashboard operation returned by the service.
* @throws DashboardInvalidInputErrorException
* Some part of the dashboard data is invalid.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @sample AmazonCloudWatch.PutDashboard
* @see AWS API
* Documentation
*/
@Override
public PutDashboardResult putDashboard(PutDashboardRequest request) {
request = beforeClientExecution(request);
return executePutDashboard(request);
}
@SdkInternalApi
final PutDashboardResult executePutDashboard(PutDashboardRequest putDashboardRequest) {
ExecutionContext executionContext = createExecutionContext(putDashboardRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new PutDashboardRequestMarshaller().marshall(super.beforeMarshalling(putDashboardRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "PutDashboard");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(new PutDashboardResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Creates a Contributor Insights rule. Rules evaluate log events in a CloudWatch Logs log group, enabling you to
* find contributor data for the log events in that log group. For more information, see Using Contributor
* Insights to Analyze High-Cardinality Data.
*
*
* If you create a rule, delete it, and then re-create it with the same name, historical data from the first time
* the rule was created may or may not be available.
*
*
* @param putInsightRuleRequest
* @return Result of the PutInsightRule operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws MissingRequiredParameterException
* An input parameter that is required is missing.
* @throws LimitExceededException
* The operation exceeded one or more limits.
* @sample AmazonCloudWatch.PutInsightRule
* @see AWS API
* Documentation
*/
@Override
public PutInsightRuleResult putInsightRule(PutInsightRuleRequest request) {
request = beforeClientExecution(request);
return executePutInsightRule(request);
}
@SdkInternalApi
final PutInsightRuleResult executePutInsightRule(PutInsightRuleRequest putInsightRuleRequest) {
ExecutionContext executionContext = createExecutionContext(putInsightRuleRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new PutInsightRuleRequestMarshaller().marshall(super.beforeMarshalling(putInsightRuleRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "PutInsightRule");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new PutInsightRuleResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Creates or updates an alarm and associates it with the specified metric, metric math expression, or anomaly
* detection model.
*
*
* Alarms based on anomaly detection models cannot have Auto Scaling actions.
*
*
* When this operation creates an alarm, the alarm state is immediately set to INSUFFICIENT_DATA. The
* alarm is then evaluated and its state is set appropriately. Any actions associated with the new state are then
* executed.
*
*
* When you update an existing alarm, its state is left unchanged, but the update completely overwrites the previous
* configuration of the alarm.
*
*
* If you are an IAM user, you must have Amazon EC2 permissions for some alarm operations:
*
*
* -
*
* iam:CreateServiceLinkedRole for all alarms with EC2 actions
*
*
* -
*
* ec2:DescribeInstanceStatus and ec2:DescribeInstances for all alarms on EC2 instance
* status metrics
*
*
* -
*
* ec2:StopInstances for alarms with stop actions
*
*
* -
*
* ec2:TerminateInstances for alarms with terminate actions
*
*
* -
*
* No specific permissions are needed for alarms with recover actions
*
*
*
*
* If you have read/write permissions for Amazon CloudWatch but not for Amazon EC2, you can still create an alarm,
* but the stop or terminate actions are not performed. However, if you are later granted the required permissions,
* the alarm actions that you created earlier are performed.
*
*
* If you are using an IAM role (for example, an EC2 instance profile), you cannot stop or terminate the instance
* using alarm actions. However, you can still see the alarm state and perform any other actions such as Amazon SNS
* notifications or Auto Scaling policies.
*
*
* If you are using temporary security credentials granted using AWS STS, you cannot stop or terminate an EC2
* instance using alarm actions.
*
*
* The first time you create an alarm in the AWS Management Console, the CLI, or by using the PutMetricAlarm API,
* CloudWatch creates the necessary service-linked role for you. The service-linked role is called
* AWSServiceRoleForCloudWatchEvents. For more information, see AWS service-linked role.
*
*
* @param putMetricAlarmRequest
* @return Result of the PutMetricAlarm operation returned by the service.
* @throws LimitExceededException
* The quota for alarms for this customer has already been reached.
* @sample AmazonCloudWatch.PutMetricAlarm
* @see AWS API
* Documentation
*/
@Override
public PutMetricAlarmResult putMetricAlarm(PutMetricAlarmRequest request) {
request = beforeClientExecution(request);
return executePutMetricAlarm(request);
}
@SdkInternalApi
final PutMetricAlarmResult executePutMetricAlarm(PutMetricAlarmRequest putMetricAlarmRequest) {
ExecutionContext executionContext = createExecutionContext(putMetricAlarmRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new PutMetricAlarmRequestMarshaller().marshall(super.beforeMarshalling(putMetricAlarmRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "PutMetricAlarm");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(
new PutMetricAlarmResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Publishes metric data points to Amazon CloudWatch. CloudWatch associates the data points with the specified
* metric. If the specified metric does not exist, CloudWatch creates the metric. When CloudWatch creates a metric,
* it can take up to fifteen minutes for the metric to appear in calls to ListMetrics.
*
*
* You can publish either individual data points in the Value field, or arrays of values and the number
* of times each value occurred during the period by using the Values and Counts fields in
* the MetricDatum structure. Using the Values and Counts method enables you
* to publish up to 150 values per metric with one PutMetricData request, and supports retrieving
* percentile statistics on this data.
*
*
* Each PutMetricData request is limited to 40 KB in size for HTTP POST requests. You can send a
* payload compressed by gzip. Each request is also limited to no more than 20 different metrics.
*
*
* Although the Value parameter accepts numbers of type Double, CloudWatch rejects values
* that are either too small or too large. Values must be in the range of -2^360 to 2^360. In addition, special
* values (for example, NaN, +Infinity, -Infinity) are not supported.
*
*
* You can use up to 10 dimensions per metric to further clarify what data the metric collects. Each dimension
* consists of a Name and Value pair. For more information about specifying dimensions, see Publishing
* Metrics in the Amazon CloudWatch User Guide.
*
*
* Data points with time stamps from 24 hours ago or longer can take at least 48 hours to become available for GetMetricData
* or
* GetMetricStatistics from the time they are submitted. Data points with time stamps between 3 and 24 hours ago
* can take as much as 2 hours to become available for for GetMetricData
* or
* GetMetricStatistics.
*
*
* CloudWatch needs raw data points to calculate percentile statistics. If you publish data using a statistic set
* instead, you can only retrieve percentile statistics for this data if one of the following conditions is true:
*
*
* -
*
* The SampleCount value of the statistic set is 1 and Min, Max, and
* Sum are all equal.
*
*
* -
*
* The Min and Max are equal, and Sum is equal to Min multiplied
* by SampleCount.
*
*
*
*
* @param putMetricDataRequest
* @return Result of the PutMetricData operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws MissingRequiredParameterException
* An input parameter that is required is missing.
* @throws InvalidParameterCombinationException
* Parameters were used together that cannot be used together.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @sample AmazonCloudWatch.PutMetricData
* @see AWS API
* Documentation
*/
@Override
public PutMetricDataResult putMetricData(PutMetricDataRequest request) {
request = beforeClientExecution(request);
return executePutMetricData(request);
}
@SdkInternalApi
final PutMetricDataResult executePutMetricData(PutMetricDataRequest putMetricDataRequest) {
ExecutionContext executionContext = createExecutionContext(putMetricDataRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new PutMetricDataRequestMarshaller().marshall(super.beforeMarshalling(putMetricDataRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "PutMetricData");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(new PutMetricDataResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Temporarily sets the state of an alarm for testing purposes. When the updated state differs from the previous
* value, the action configured for the appropriate state is invoked. For example, if your alarm is configured to
* send an Amazon SNS message when an alarm is triggered, temporarily changing the alarm state to ALARM
* sends an SNS message.
*
*
* Metric alarms returns to their actual state quickly, often within seconds. Because the metric alarm state change
* happens quickly, it is typically only visible in the alarm's History tab in the Amazon CloudWatch console
* or through DescribeAlarmHistory.
*
*
* If you use SetAlarmState on a composite alarm, the composite alarm is not guaranteed to return to
* its actual state. It will return to its actual state only once any of its children alarms change state. It is
* also re-evaluated if you update its configuration.
*
*
* If an alarm triggers EC2 Auto Scaling policies or application Auto Scaling policies, you must include information
* in the StateReasonData parameter to enable the policy to take the correct action.
*
*
* @param setAlarmStateRequest
* @return Result of the SetAlarmState operation returned by the service.
* @throws ResourceNotFoundException
* The named resource does not exist.
* @throws InvalidFormatException
* Data was not syntactically valid JSON.
* @sample AmazonCloudWatch.SetAlarmState
* @see AWS API
* Documentation
*/
@Override
public SetAlarmStateResult setAlarmState(SetAlarmStateRequest request) {
request = beforeClientExecution(request);
return executeSetAlarmState(request);
}
@SdkInternalApi
final SetAlarmStateResult executeSetAlarmState(SetAlarmStateRequest setAlarmStateRequest) {
ExecutionContext executionContext = createExecutionContext(setAlarmStateRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new SetAlarmStateRequestMarshaller().marshall(super.beforeMarshalling(setAlarmStateRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "SetAlarmState");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(new SetAlarmStateResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Assigns one or more tags (key-value pairs) to the specified CloudWatch resource. Currently, the only CloudWatch
* resources that can be tagged are alarms.
*
*
* Tags can help you organize and categorize your resources. You can also use them to scope user permissions, by
* granting a user permission to access or change only resources with certain tag values.
*
*
* Tags don't have any semantic meaning to AWS and are interpreted strictly as strings of characters.
*
*
* You can use the TagResource action with an alarm that already has tags. If you specify a new tag key
* for the alarm, this tag is appended to the list of tags associated with the alarm. If you specify a tag key that
* is already associated with the alarm, the new tag value that you specify replaces the previous value for that
* tag.
*
*
* You can associate as many as 50 tags with a resource.
*
*
* @param tagResourceRequest
* @return Result of the TagResource operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws ResourceNotFoundException
* The named resource does not exist.
* @throws ConcurrentModificationException
* More than one process tried to modify a resource at the same time.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @sample AmazonCloudWatch.TagResource
* @see AWS API
* Documentation
*/
@Override
public TagResourceResult tagResource(TagResourceRequest request) {
request = beforeClientExecution(request);
return executeTagResource(request);
}
@SdkInternalApi
final TagResourceResult executeTagResource(TagResourceRequest tagResourceRequest) {
ExecutionContext executionContext = createExecutionContext(tagResourceRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new TagResourceRequestMarshaller().marshall(super.beforeMarshalling(tagResourceRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "TagResource");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(new TagResourceResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* Removes one or more tags from the specified resource.
*
*
* @param untagResourceRequest
* @return Result of the UntagResource operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws ResourceNotFoundException
* The named resource does not exist.
* @throws ConcurrentModificationException
* More than one process tried to modify a resource at the same time.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @sample AmazonCloudWatch.UntagResource
* @see AWS API
* Documentation
*/
@Override
public UntagResourceResult untagResource(UntagResourceRequest request) {
request = beforeClientExecution(request);
return executeUntagResource(request);
}
@SdkInternalApi
final UntagResourceResult executeUntagResource(UntagResourceRequest untagResourceRequest) {
ExecutionContext executionContext = createExecutionContext(untagResourceRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new UntagResourceRequestMarshaller().marshall(super.beforeMarshalling(untagResourceRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
request.addHandlerContext(HandlerContextKey.SIGNING_REGION, getSigningRegion());
request.addHandlerContext(HandlerContextKey.SERVICE_ID, "CloudWatch");
request.addHandlerContext(HandlerContextKey.OPERATION_NAME, "UntagResource");
request.addHandlerContext(HandlerContextKey.ADVANCED_CONFIG, advancedConfig);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler responseHandler = new StaxResponseHandler(new UntagResourceResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
* Returns additional metadata for a previously executed successful, request, typically used for debugging issues
* where a service isn't acting as expected. This data isn't considered part of the result data returned by an
* operation, so it's available through this separate, diagnostic interface.
*
* Response metadata is only cached for a limited period of time, so if you need to access this extra diagnostic
* information for an executed request, you should use this method to retrieve it as soon as possible after
* executing the request.
*
* @param request
* The originally executed request
*
* @return The response metadata for the specified request, or null if none is available.
*/
public ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request) {
return client.getResponseMetadataForRequest(request);
}
/**
* Normal invoke with authentication. Credentials are required and may be overriden at the request level.
**/
private Response invoke(Request request, HttpResponseHandler> responseHandler,
ExecutionContext executionContext) {
return invoke(request, responseHandler, executionContext, null, null);
}
/**
* Normal invoke with authentication. Credentials are required and may be overriden at the request level.
**/
private Response invoke(Request request, HttpResponseHandler> responseHandler,
ExecutionContext executionContext, URI cachedEndpoint, URI uriFromEndpointTrait) {
executionContext.setCredentialsProvider(CredentialUtils.getCredentialsProvider(request.getOriginalRequest(), awsCredentialsProvider));
return doInvoke(request, responseHandler, executionContext, cachedEndpoint, uriFromEndpointTrait);
}
/**
* Invoke with no authentication. Credentials are not required and any credentials set on the client or request will
* be ignored for this operation.
**/
private Response anonymousInvoke(Request request,
HttpResponseHandler> responseHandler, ExecutionContext executionContext) {
return doInvoke(request, responseHandler, executionContext, null, null);
}
/**
* Invoke the request using the http client. Assumes credentials (or lack thereof) have been configured in the
* ExecutionContext beforehand.
**/
private Response doInvoke(Request request, HttpResponseHandler> responseHandler,
ExecutionContext executionContext, URI discoveredEndpoint, URI uriFromEndpointTrait) {
if (discoveredEndpoint != null) {
request.setEndpoint(discoveredEndpoint);
request.getOriginalRequest().getRequestClientOptions().appendUserAgent("endpoint-discovery");
} else if (uriFromEndpointTrait != null) {
request.setEndpoint(uriFromEndpointTrait);
} else {
request.setEndpoint(endpoint);
}
request.setTimeOffset(timeOffset);
DefaultErrorResponseHandler errorResponseHandler = new DefaultErrorResponseHandler(exceptionUnmarshallers);
return client.execute(request, responseHandler, errorResponseHandler, executionContext);
}
@Override
public AmazonCloudWatchWaiters waiters() {
if (waiters == null) {
synchronized (this) {
if (waiters == null) {
waiters = new AmazonCloudWatchWaiters(this);
}
}
}
return waiters;
}
@Override
public void shutdown() {
super.shutdown();
if (waiters != null) {
waiters.shutdown();
}
}
}