com.amazonaws.services.cloudwatch.AmazonCloudWatch Maven / Gradle / Ivy
Show all versions of aws-java-sdk-cloudwatch Show documentation
/*
* Copyright 2016-2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with
* the License. A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions
* and limitations under the License.
*/
package com.amazonaws.services.cloudwatch;
import javax.annotation.Generated;
import com.amazonaws.*;
import com.amazonaws.regions.*;
import com.amazonaws.services.cloudwatch.model.*;
import com.amazonaws.services.cloudwatch.waiters.AmazonCloudWatchWaiters;
/**
* Interface for accessing CloudWatch.
*
* Note: Do not directly implement this interface, new methods are added to it regularly. Extend from
* {@link com.amazonaws.services.cloudwatch.AbstractAmazonCloudWatch} instead.
*
*
*
* Amazon CloudWatch monitors your Amazon Web Services (AWS) resources and the applications you run on AWS in real time.
* You can use CloudWatch to collect and track metrics, which are the variables you want to measure for your resources
* and applications.
*
*
* CloudWatch alarms send notifications or automatically change the resources you are monitoring based on rules that you
* define. For example, you can monitor the CPU usage and disk reads and writes of your Amazon EC2 instances. Then, use
* this data to determine whether you should launch additional instances to handle increased load. You can also use this
* data to stop under-used instances to save money.
*
*
* In addition to monitoring the built-in metrics that come with AWS, you can monitor your own custom metrics. With
* CloudWatch, you gain system-wide visibility into resource utilization, application performance, and operational
* health.
*
*/
@Generated("com.amazonaws:aws-java-sdk-code-generator")
public interface AmazonCloudWatch {
/**
* The region metadata service name for computing region endpoints. You can use this value to retrieve metadata
* (such as supported regions) of the service.
*
* @see RegionUtils#getRegionsForService(String)
*/
String ENDPOINT_PREFIX = "monitoring";
/**
* Overrides the default endpoint for this client ("https://monitoring.us-east-1.amazonaws.com"). Callers can use
* this method to control which AWS region they want to work with.
*
* Callers can pass in just the endpoint (ex: "monitoring.us-east-1.amazonaws.com") or a full URL, including the
* protocol (ex: "https://monitoring.us-east-1.amazonaws.com"). If the protocol is not specified here, the default
* protocol from this client's {@link ClientConfiguration} will be used, which by default is HTTPS.
*
* For more information on using AWS regions with the AWS SDK for Java, and a complete list of all available
* endpoints for all AWS services, see: https://docs.aws.amazon.com/sdk-for-java/v1/developer-guide/java-dg-region-selection.html#region-selection-
* choose-endpoint
*
* This method is not threadsafe. An endpoint should be configured when the client is created and before any
* service requests are made. Changing it afterwards creates inevitable race conditions for any service requests in
* transit or retrying.
*
* @param endpoint
* The endpoint (ex: "monitoring.us-east-1.amazonaws.com") or a full URL, including the protocol (ex:
* "https://monitoring.us-east-1.amazonaws.com") of the region specific AWS endpoint this client will
* communicate with.
* @deprecated use {@link AwsClientBuilder#setEndpointConfiguration(AwsClientBuilder.EndpointConfiguration)} for
* example:
* {@code builder.setEndpointConfiguration(new EndpointConfiguration(endpoint, signingRegion));}
*/
@Deprecated
void setEndpoint(String endpoint);
/**
* An alternative to {@link AmazonCloudWatch#setEndpoint(String)}, sets the regional endpoint for this client's
* service calls. Callers can use this method to control which AWS region they want to work with.
*
* By default, all service endpoints in all regions use the https protocol. To use http instead, specify it in the
* {@link ClientConfiguration} supplied at construction.
*
* This method is not threadsafe. A region should be configured when the client is created and before any service
* requests are made. Changing it afterwards creates inevitable race conditions for any service requests in transit
* or retrying.
*
* @param region
* The region this client will communicate with. See {@link Region#getRegion(com.amazonaws.regions.Regions)}
* for accessing a given region. Must not be null and must be a region where the service is available.
*
* @see Region#getRegion(com.amazonaws.regions.Regions)
* @see Region#createClient(Class, com.amazonaws.auth.AWSCredentialsProvider, ClientConfiguration)
* @see Region#isServiceSupported(String)
* @deprecated use {@link AwsClientBuilder#setRegion(String)}
*/
@Deprecated
void setRegion(Region region);
/**
*
* Deletes the specified alarms. You can delete up to 100 alarms in one operation. However, this total can include
* no more than one composite alarm. For example, you could delete 99 metric alarms and one composite alarms with
* one operation, but you can't delete two composite alarms with one operation.
*
*
* In the event of an error, no alarms are deleted.
*
*
*
* It is possible to create a loop or cycle of composite alarms, where composite alarm A depends on composite alarm
* B, and composite alarm B also depends on composite alarm A. In this scenario, you can't delete any composite
* alarm that is part of the cycle because there is always still a composite alarm that depends on that alarm that
* you want to delete.
*
*
* To get out of such a situation, you must break the cycle by changing the rule of one of the composite alarms in
* the cycle to remove a dependency that creates the cycle. The simplest change to make to break a cycle is to
* change the AlarmRule of one of the alarms to False.
*
*
* Additionally, the evaluation of composite alarms stops if CloudWatch detects a cycle in the evaluation path.
*
*
*
* @param deleteAlarmsRequest
* @return Result of the DeleteAlarms operation returned by the service.
* @throws ResourceNotFoundException
* The named resource does not exist.
* @sample AmazonCloudWatch.DeleteAlarms
* @see AWS API
* Documentation
*/
DeleteAlarmsResult deleteAlarms(DeleteAlarmsRequest deleteAlarmsRequest);
/**
*
* Deletes the specified anomaly detection model from your account.
*
*
* @param deleteAnomalyDetectorRequest
* @return Result of the DeleteAnomalyDetector operation returned by the service.
* @throws ResourceNotFoundException
* The named resource does not exist.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws MissingRequiredParameterException
* An input parameter that is required is missing.
* @sample AmazonCloudWatch.DeleteAnomalyDetector
* @see AWS API Documentation
*/
DeleteAnomalyDetectorResult deleteAnomalyDetector(DeleteAnomalyDetectorRequest deleteAnomalyDetectorRequest);
/**
*
* Deletes all dashboards that you specify. You can specify up to 100 dashboards to delete. If there is an error
* during this call, no dashboards are deleted.
*
*
* @param deleteDashboardsRequest
* @return Result of the DeleteDashboards operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws DashboardNotFoundErrorException
* The specified dashboard does not exist.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @sample AmazonCloudWatch.DeleteDashboards
* @see AWS
* API Documentation
*/
DeleteDashboardsResult deleteDashboards(DeleteDashboardsRequest deleteDashboardsRequest);
/**
*
* Permanently deletes the specified Contributor Insights rules.
*
*
* If you create a rule, delete it, and then re-create it with the same name, historical data from the first time
* the rule was created might not be available.
*
*
* @param deleteInsightRulesRequest
* @return Result of the DeleteInsightRules operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws MissingRequiredParameterException
* An input parameter that is required is missing.
* @sample AmazonCloudWatch.DeleteInsightRules
* @see AWS
* API Documentation
*/
DeleteInsightRulesResult deleteInsightRules(DeleteInsightRulesRequest deleteInsightRulesRequest);
/**
*
* Retrieves the history for the specified alarm. You can filter the results by date range or item type. If an alarm
* name is not specified, the histories for either all metric alarms or all composite alarms are returned.
*
*
* CloudWatch retains the history of an alarm even if you delete the alarm.
*
*
* @param describeAlarmHistoryRequest
* @return Result of the DescribeAlarmHistory operation returned by the service.
* @throws InvalidNextTokenException
* The next token specified is invalid.
* @sample AmazonCloudWatch.DescribeAlarmHistory
* @see AWS API Documentation
*/
DescribeAlarmHistoryResult describeAlarmHistory(DescribeAlarmHistoryRequest describeAlarmHistoryRequest);
/**
* Simplified method form for invoking the DescribeAlarmHistory operation.
*
* @see #describeAlarmHistory(DescribeAlarmHistoryRequest)
*/
DescribeAlarmHistoryResult describeAlarmHistory();
/**
*
* Retrieves the specified alarms. You can filter the results by specifying a prefix for the alarm name, the alarm
* state, or a prefix for any action.
*
*
* @param describeAlarmsRequest
* @return Result of the DescribeAlarms operation returned by the service.
* @throws InvalidNextTokenException
* The next token specified is invalid.
* @sample AmazonCloudWatch.DescribeAlarms
* @see AWS API
* Documentation
*/
DescribeAlarmsResult describeAlarms(DescribeAlarmsRequest describeAlarmsRequest);
/**
* Simplified method form for invoking the DescribeAlarms operation.
*
* @see #describeAlarms(DescribeAlarmsRequest)
*/
DescribeAlarmsResult describeAlarms();
/**
*
* Retrieves the alarms for the specified metric. To filter the results, specify a statistic, period, or unit.
*
*
* This operation retrieves only standard alarms that are based on the specified metric. It does not return alarms
* based on math expressions that use the specified metric, or composite alarms that use the specified metric.
*
*
* @param describeAlarmsForMetricRequest
* @return Result of the DescribeAlarmsForMetric operation returned by the service.
* @sample AmazonCloudWatch.DescribeAlarmsForMetric
* @see AWS API Documentation
*/
DescribeAlarmsForMetricResult describeAlarmsForMetric(DescribeAlarmsForMetricRequest describeAlarmsForMetricRequest);
/**
*
* Lists the anomaly detection models that you have created in your account. You can list all models in your account
* or filter the results to only the models that are related to a certain namespace, metric name, or metric
* dimension.
*
*
* @param describeAnomalyDetectorsRequest
* @return Result of the DescribeAnomalyDetectors operation returned by the service.
* @throws InvalidNextTokenException
* The next token specified is invalid.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @sample AmazonCloudWatch.DescribeAnomalyDetectors
* @see AWS API Documentation
*/
DescribeAnomalyDetectorsResult describeAnomalyDetectors(DescribeAnomalyDetectorsRequest describeAnomalyDetectorsRequest);
/**
*
* Returns a list of all the Contributor Insights rules in your account.
*
*
* For more information about Contributor Insights, see Using Contributor
* Insights to Analyze High-Cardinality Data.
*
*
* @param describeInsightRulesRequest
* @return Result of the DescribeInsightRules operation returned by the service.
* @throws InvalidNextTokenException
* The next token specified is invalid.
* @sample AmazonCloudWatch.DescribeInsightRules
* @see AWS API Documentation
*/
DescribeInsightRulesResult describeInsightRules(DescribeInsightRulesRequest describeInsightRulesRequest);
/**
*
* Disables the actions for the specified alarms. When an alarm's actions are disabled, the alarm actions do not
* execute when the alarm state changes.
*
*
* @param disableAlarmActionsRequest
* @return Result of the DisableAlarmActions operation returned by the service.
* @sample AmazonCloudWatch.DisableAlarmActions
* @see AWS
* API Documentation
*/
DisableAlarmActionsResult disableAlarmActions(DisableAlarmActionsRequest disableAlarmActionsRequest);
/**
*
* Disables the specified Contributor Insights rules. When rules are disabled, they do not analyze log groups and do
* not incur costs.
*
*
* @param disableInsightRulesRequest
* @return Result of the DisableInsightRules operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws MissingRequiredParameterException
* An input parameter that is required is missing.
* @sample AmazonCloudWatch.DisableInsightRules
* @see AWS
* API Documentation
*/
DisableInsightRulesResult disableInsightRules(DisableInsightRulesRequest disableInsightRulesRequest);
/**
*
* Enables the actions for the specified alarms.
*
*
* @param enableAlarmActionsRequest
* @return Result of the EnableAlarmActions operation returned by the service.
* @sample AmazonCloudWatch.EnableAlarmActions
* @see AWS
* API Documentation
*/
EnableAlarmActionsResult enableAlarmActions(EnableAlarmActionsRequest enableAlarmActionsRequest);
/**
*
* Enables the specified Contributor Insights rules. When rules are enabled, they immediately begin analyzing log
* data.
*
*
* @param enableInsightRulesRequest
* @return Result of the EnableInsightRules operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws MissingRequiredParameterException
* An input parameter that is required is missing.
* @throws LimitExceededException
* The operation exceeded one or more limits.
* @sample AmazonCloudWatch.EnableInsightRules
* @see AWS
* API Documentation
*/
EnableInsightRulesResult enableInsightRules(EnableInsightRulesRequest enableInsightRulesRequest);
/**
*
* Displays the details of the dashboard that you specify.
*
*
* To copy an existing dashboard, use GetDashboard, and then use the data returned within
* DashboardBody as the template for the new dashboard when you call PutDashboard to
* create the copy.
*
*
* @param getDashboardRequest
* @return Result of the GetDashboard operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws DashboardNotFoundErrorException
* The specified dashboard does not exist.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @sample AmazonCloudWatch.GetDashboard
* @see AWS API
* Documentation
*/
GetDashboardResult getDashboard(GetDashboardRequest getDashboardRequest);
/**
*
* This operation returns the time series data collected by a Contributor Insights rule. The data includes the
* identity and number of contributors to the log group.
*
*
* You can also optionally return one or more statistics about each data point in the time series. These statistics
* can include the following:
*
*
* -
*
* UniqueContributors -- the number of unique contributors for each data point.
*
*
* -
*
* MaxContributorValue -- the value of the top contributor for each data point. The identity of the
* contributor might change for each data point in the graph.
*
*
* If this rule aggregates by COUNT, the top contributor for each data point is the contributor with the most
* occurrences in that period. If the rule aggregates by SUM, the top contributor is the contributor with the
* highest sum in the log field specified by the rule's Value, during that period.
*
*
* -
*
* SampleCount -- the number of data points matched by the rule.
*
*
* -
*
* Sum -- the sum of the values from all contributors during the time period represented by that data
* point.
*
*
* -
*
* Minimum -- the minimum value from a single observation during the time period represented by that
* data point.
*
*
* -
*
* Maximum -- the maximum value from a single observation during the time period represented by that
* data point.
*
*
* -
*
* Average -- the average value from all contributors during the time period represented by that data
* point.
*
*
*
*
* @param getInsightRuleReportRequest
* @return Result of the GetInsightRuleReport operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws MissingRequiredParameterException
* An input parameter that is required is missing.
* @throws ResourceNotFoundException
* The named resource does not exist.
* @sample AmazonCloudWatch.GetInsightRuleReport
* @see AWS API Documentation
*/
GetInsightRuleReportResult getInsightRuleReport(GetInsightRuleReportRequest getInsightRuleReportRequest);
/**
*
* You can use the GetMetricData API to retrieve as many as 500 different metrics in a single request,
* with a total of as many as 100,800 data points. You can also optionally perform math expressions on the values of
* the returned statistics, to create new time series that represent new insights into your data. For example, using
* Lambda metrics, you could divide the Errors metric by the Invocations metric to get an error rate time series.
* For more information about metric math expressions, see Metric Math Syntax and Functions in the Amazon CloudWatch User Guide.
*
*
* Calls to the GetMetricData API have a different pricing structure than calls to
* GetMetricStatistics. For more information about pricing, see Amazon CloudWatch Pricing.
*
*
* Amazon CloudWatch retains metric data as follows:
*
*
* -
*
* Data points with a period of less than 60 seconds are available for 3 hours. These data points are
* high-resolution metrics and are available only for custom metrics that have been defined with a
* StorageResolution of 1.
*
*
* -
*
* Data points with a period of 60 seconds (1-minute) are available for 15 days.
*
*
* -
*
* Data points with a period of 300 seconds (5-minute) are available for 63 days.
*
*
* -
*
* Data points with a period of 3600 seconds (1 hour) are available for 455 days (15 months).
*
*
*
*
* Data points that are initially published with a shorter period are aggregated together for long-term storage. For
* example, if you collect data using a period of 1 minute, the data remains available for 15 days with 1-minute
* resolution. After 15 days, this data is still available, but is aggregated and retrievable only with a resolution
* of 5 minutes. After 63 days, the data is further aggregated and is available with a resolution of 1 hour.
*
*
* If you omit Unit in your request, all data that was collected with any unit is returned, along with
* the corresponding units that were specified when the data was reported to CloudWatch. If you specify a unit, the
* operation returns only data that was collected with that unit specified. If you specify a unit that does not
* match the data collected, the results of the operation are null. CloudWatch does not perform unit conversions.
*
*
* @param getMetricDataRequest
* @return Result of the GetMetricData operation returned by the service.
* @throws InvalidNextTokenException
* The next token specified is invalid.
* @sample AmazonCloudWatch.GetMetricData
* @see AWS API
* Documentation
*/
GetMetricDataResult getMetricData(GetMetricDataRequest getMetricDataRequest);
/**
*
* Gets statistics for the specified metric.
*
*
* The maximum number of data points returned from a single call is 1,440. If you request more than 1,440 data
* points, CloudWatch returns an error. To reduce the number of data points, you can narrow the specified time range
* and make multiple requests across adjacent time ranges, or you can increase the specified period. Data points are
* not returned in chronological order.
*
*
* CloudWatch aggregates data points based on the length of the period that you specify. For example, if you request
* statistics with a one-hour period, CloudWatch aggregates all data points with time stamps that fall within each
* one-hour period. Therefore, the number of values aggregated by CloudWatch is larger than the number of data
* points returned.
*
*
* CloudWatch needs raw data points to calculate percentile statistics. If you publish data using a statistic set
* instead, you can only retrieve percentile statistics for this data if one of the following conditions is true:
*
*
* -
*
* The SampleCount value of the statistic set is 1.
*
*
* -
*
* The Min and the Max values of the statistic set are equal.
*
*
*
*
* Percentile statistics are not available for metrics when any of the metric values are negative numbers.
*
*
* Amazon CloudWatch retains metric data as follows:
*
*
* -
*
* Data points with a period of less than 60 seconds are available for 3 hours. These data points are
* high-resolution metrics and are available only for custom metrics that have been defined with a
* StorageResolution of 1.
*
*
* -
*
* Data points with a period of 60 seconds (1-minute) are available for 15 days.
*
*
* -
*
* Data points with a period of 300 seconds (5-minute) are available for 63 days.
*
*
* -
*
* Data points with a period of 3600 seconds (1 hour) are available for 455 days (15 months).
*
*
*
*
* Data points that are initially published with a shorter period are aggregated together for long-term storage. For
* example, if you collect data using a period of 1 minute, the data remains available for 15 days with 1-minute
* resolution. After 15 days, this data is still available, but is aggregated and retrievable only with a resolution
* of 5 minutes. After 63 days, the data is further aggregated and is available with a resolution of 1 hour.
*
*
* CloudWatch started retaining 5-minute and 1-hour metric data as of July 9, 2016.
*
*
* For information about metrics and dimensions supported by AWS services, see the Amazon CloudWatch
* Metrics and Dimensions Reference in the Amazon CloudWatch User Guide.
*
*
* @param getMetricStatisticsRequest
* @return Result of the GetMetricStatistics operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws MissingRequiredParameterException
* An input parameter that is required is missing.
* @throws InvalidParameterCombinationException
* Parameters were used together that cannot be used together.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @sample AmazonCloudWatch.GetMetricStatistics
* @see AWS
* API Documentation
*/
GetMetricStatisticsResult getMetricStatistics(GetMetricStatisticsRequest getMetricStatisticsRequest);
/**
*
* You can use the GetMetricWidgetImage API to retrieve a snapshot graph of one or more Amazon
* CloudWatch metrics as a bitmap image. You can then embed this image into your services and products, such as wiki
* pages, reports, and documents. You could also retrieve images regularly, such as every minute, and create your
* own custom live dashboard.
*
*
* The graph you retrieve can include all CloudWatch metric graph features, including metric math and horizontal and
* vertical annotations.
*
*
* There is a limit of 20 transactions per second for this API. Each GetMetricWidgetImage action has
* the following limits:
*
*
* -
*
* As many as 100 metrics in the graph.
*
*
* -
*
* Up to 100 KB uncompressed payload.
*
*
*
*
* @param getMetricWidgetImageRequest
* @return Result of the GetMetricWidgetImage operation returned by the service.
* @sample AmazonCloudWatch.GetMetricWidgetImage
* @see AWS API Documentation
*/
GetMetricWidgetImageResult getMetricWidgetImage(GetMetricWidgetImageRequest getMetricWidgetImageRequest);
/**
*
* Returns a list of the dashboards for your account. If you include DashboardNamePrefix, only those
* dashboards with names starting with the prefix are listed. Otherwise, all dashboards in your account are listed.
*
*
* ListDashboards returns up to 1000 results on one page. If there are more than 1000 dashboards, you
* can call ListDashboards again and include the value you received for NextToken in the
* first call, to receive the next 1000 results.
*
*
* @param listDashboardsRequest
* @return Result of the ListDashboards operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @sample AmazonCloudWatch.ListDashboards
* @see AWS API
* Documentation
*/
ListDashboardsResult listDashboards(ListDashboardsRequest listDashboardsRequest);
/**
*
* List the specified metrics. You can use the returned metrics with GetMetricData
* or
* GetMetricStatistics to obtain statistical data.
*
*
* Up to 500 results are returned for any one call. To retrieve additional results, use the returned token with
* subsequent calls.
*
*
* After you create a metric, allow up to 15 minutes before the metric appears. You can see statistics about the
* metric sooner by using GetMetricData
* or
* GetMetricStatistics.
*
*
* ListMetrics doesn't return information about metrics if those metrics haven't reported data in the
* past two weeks. To retrieve those metrics, use GetMetricData
* or
* GetMetricStatistics.
*
*
* @param listMetricsRequest
* @return Result of the ListMetrics operation returned by the service.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @sample AmazonCloudWatch.ListMetrics
* @see AWS API
* Documentation
*/
ListMetricsResult listMetrics(ListMetricsRequest listMetricsRequest);
/**
* Simplified method form for invoking the ListMetrics operation.
*
* @see #listMetrics(ListMetricsRequest)
*/
ListMetricsResult listMetrics();
/**
*
* Displays the tags associated with a CloudWatch resource. Currently, alarms and Contributor Insights rules support
* tagging.
*
*
* @param listTagsForResourceRequest
* @return Result of the ListTagsForResource operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws ResourceNotFoundException
* The named resource does not exist.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @sample AmazonCloudWatch.ListTagsForResource
* @see AWS
* API Documentation
*/
ListTagsForResourceResult listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest);
/**
*
* Creates an anomaly detection model for a CloudWatch metric. You can use the model to display a band of expected
* normal values when the metric is graphed.
*
*
* For more information, see CloudWatch Anomaly Detection.
*
*
* @param putAnomalyDetectorRequest
* @return Result of the PutAnomalyDetector operation returned by the service.
* @throws LimitExceededException
* The operation exceeded one or more limits.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws MissingRequiredParameterException
* An input parameter that is required is missing.
* @sample AmazonCloudWatch.PutAnomalyDetector
* @see AWS
* API Documentation
*/
PutAnomalyDetectorResult putAnomalyDetector(PutAnomalyDetectorRequest putAnomalyDetectorRequest);
/**
*
* Creates or updates a composite alarm. When you create a composite alarm, you specify a rule expression for
* the alarm that takes into account the alarm states of other alarms that you have created. The composite alarm
* goes into ALARM state only if all conditions of the rule are met.
*
*
* The alarms specified in a composite alarm's rule expression can include metric alarms and other composite alarms.
*
*
* Using composite alarms can reduce alarm noise. You can create multiple metric alarms, and also create a composite
* alarm and set up alerts only for the composite alarm. For example, you could create a composite alarm that goes
* into ALARM state only when more than one of the underlying metric alarms are in ALARM state.
*
*
* Currently, the only alarm actions that can be taken by composite alarms are notifying SNS topics.
*
*
*
* It is possible to create a loop or cycle of composite alarms, where composite alarm A depends on composite alarm
* B, and composite alarm B also depends on composite alarm A. In this scenario, you can't delete any composite
* alarm that is part of the cycle because there is always still a composite alarm that depends on that alarm that
* you want to delete.
*
*
* To get out of such a situation, you must break the cycle by changing the rule of one of the composite alarms in
* the cycle to remove a dependency that creates the cycle. The simplest change to make to break a cycle is to
* change the AlarmRule of one of the alarms to False.
*
*
* Additionally, the evaluation of composite alarms stops if CloudWatch detects a cycle in the evaluation path.
*
*
*
* When this operation creates an alarm, the alarm state is immediately set to INSUFFICIENT_DATA. The
* alarm is then evaluated and its state is set appropriately. Any actions associated with the new state are then
* executed. For a composite alarm, this initial time after creation is the only time that the alarm can be in
* INSUFFICIENT_DATA state.
*
*
* When you update an existing alarm, its state is left unchanged, but the update completely overwrites the previous
* configuration of the alarm.
*
*
* If you are an IAM user, you must have iam:CreateServiceLinkedRole to create a composite alarm that
* has Systems Manager OpsItem actions.
*
*
* @param putCompositeAlarmRequest
* @return Result of the PutCompositeAlarm operation returned by the service.
* @throws LimitExceededException
* The quota for alarms for this customer has already been reached.
* @sample AmazonCloudWatch.PutCompositeAlarm
* @see AWS
* API Documentation
*/
PutCompositeAlarmResult putCompositeAlarm(PutCompositeAlarmRequest putCompositeAlarmRequest);
/**
*
* Creates a dashboard if it does not already exist, or updates an existing dashboard. If you update a dashboard,
* the entire contents are replaced with what you specify here.
*
*
* All dashboards in your account are global, not region-specific.
*
*
* A simple way to create a dashboard using PutDashboard is to copy an existing dashboard. To copy an
* existing dashboard using the console, you can load the dashboard and then use the View/edit source command in the
* Actions menu to display the JSON block for that dashboard. Another way to copy a dashboard is to use
* GetDashboard, and then use the data returned within DashboardBody as the template for
* the new dashboard when you call PutDashboard.
*
*
* When you create a dashboard with PutDashboard, a good practice is to add a text widget at the top of
* the dashboard with a message that the dashboard was created by script and should not be changed in the console.
* This message could also point console users to the location of the DashboardBody script or the
* CloudFormation template used to create the dashboard.
*
*
* @param putDashboardRequest
* @return Result of the PutDashboard operation returned by the service.
* @throws DashboardInvalidInputErrorException
* Some part of the dashboard data is invalid.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @sample AmazonCloudWatch.PutDashboard
* @see AWS API
* Documentation
*/
PutDashboardResult putDashboard(PutDashboardRequest putDashboardRequest);
/**
*
* Creates a Contributor Insights rule. Rules evaluate log events in a CloudWatch Logs log group, enabling you to
* find contributor data for the log events in that log group. For more information, see Using Contributor
* Insights to Analyze High-Cardinality Data.
*
*
* If you create a rule, delete it, and then re-create it with the same name, historical data from the first time
* the rule was created might not be available.
*
*
* @param putInsightRuleRequest
* @return Result of the PutInsightRule operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws MissingRequiredParameterException
* An input parameter that is required is missing.
* @throws LimitExceededException
* The operation exceeded one or more limits.
* @sample AmazonCloudWatch.PutInsightRule
* @see AWS API
* Documentation
*/
PutInsightRuleResult putInsightRule(PutInsightRuleRequest putInsightRuleRequest);
/**
*
* Creates or updates an alarm and associates it with the specified metric, metric math expression, or anomaly
* detection model.
*
*
* Alarms based on anomaly detection models cannot have Auto Scaling actions.
*
*
* When this operation creates an alarm, the alarm state is immediately set to INSUFFICIENT_DATA. The
* alarm is then evaluated and its state is set appropriately. Any actions associated with the new state are then
* executed.
*
*
* When you update an existing alarm, its state is left unchanged, but the update completely overwrites the previous
* configuration of the alarm.
*
*
* If you are an IAM user, you must have Amazon EC2 permissions for some alarm operations:
*
*
* -
*
* The iam:CreateServiceLinkedRole for all alarms with EC2 actions
*
*
* -
*
* The iam:CreateServiceLinkedRole to create an alarm with Systems Manager OpsItem actions.
*
*
*
*
* The first time you create an alarm in the AWS Management Console, the CLI, or by using the PutMetricAlarm API,
* CloudWatch creates the necessary service-linked rolea for you. The service-linked roles are called
* AWSServiceRoleForCloudWatchEvents and AWSServiceRoleForCloudWatchAlarms_ActionSSM. For
* more information, see AWS service-linked role.
*
*
* @param putMetricAlarmRequest
* @return Result of the PutMetricAlarm operation returned by the service.
* @throws LimitExceededException
* The quota for alarms for this customer has already been reached.
* @sample AmazonCloudWatch.PutMetricAlarm
* @see AWS API
* Documentation
*/
PutMetricAlarmResult putMetricAlarm(PutMetricAlarmRequest putMetricAlarmRequest);
/**
*
* Publishes metric data points to Amazon CloudWatch. CloudWatch associates the data points with the specified
* metric. If the specified metric does not exist, CloudWatch creates the metric. When CloudWatch creates a metric,
* it can take up to fifteen minutes for the metric to appear in calls to ListMetrics.
*
*
* You can publish either individual data points in the Value field, or arrays of values and the number
* of times each value occurred during the period by using the Values and Counts fields in
* the MetricDatum structure. Using the Values and Counts method enables you
* to publish up to 150 values per metric with one PutMetricData request, and supports retrieving
* percentile statistics on this data.
*
*
* Each PutMetricData request is limited to 40 KB in size for HTTP POST requests. You can send a
* payload compressed by gzip. Each request is also limited to no more than 20 different metrics.
*
*
* Although the Value parameter accepts numbers of type Double, CloudWatch rejects values
* that are either too small or too large. Values must be in the range of -2^360 to 2^360. In addition, special
* values (for example, NaN, +Infinity, -Infinity) are not supported.
*
*
* You can use up to 10 dimensions per metric to further clarify what data the metric collects. Each dimension
* consists of a Name and Value pair. For more information about specifying dimensions, see Publishing
* Metrics in the Amazon CloudWatch User Guide.
*
*
* You specify the time stamp to be associated with each data point. You can specify time stamps that are as much as
* two weeks before the current date, and as much as 2 hours after the current day and time.
*
*
* Data points with time stamps from 24 hours ago or longer can take at least 48 hours to become available for GetMetricData
* or
* GetMetricStatistics from the time they are submitted. Data points with time stamps between 3 and 24 hours ago
* can take as much as 2 hours to become available for for GetMetricData
* or
* GetMetricStatistics.
*
*
* CloudWatch needs raw data points to calculate percentile statistics. If you publish data using a statistic set
* instead, you can only retrieve percentile statistics for this data if one of the following conditions is true:
*
*
* -
*
* The SampleCount value of the statistic set is 1 and Min, Max, and
* Sum are all equal.
*
*
* -
*
* The Min and Max are equal, and Sum is equal to Min multiplied
* by SampleCount.
*
*
*
*
* @param putMetricDataRequest
* @return Result of the PutMetricData operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws MissingRequiredParameterException
* An input parameter that is required is missing.
* @throws InvalidParameterCombinationException
* Parameters were used together that cannot be used together.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @sample AmazonCloudWatch.PutMetricData
* @see AWS API
* Documentation
*/
PutMetricDataResult putMetricData(PutMetricDataRequest putMetricDataRequest);
/**
*
* Temporarily sets the state of an alarm for testing purposes. When the updated state differs from the previous
* value, the action configured for the appropriate state is invoked. For example, if your alarm is configured to
* send an Amazon SNS message when an alarm is triggered, temporarily changing the alarm state to ALARM
* sends an SNS message.
*
*
* Metric alarms returns to their actual state quickly, often within seconds. Because the metric alarm state change
* happens quickly, it is typically only visible in the alarm's History tab in the Amazon CloudWatch console
* or through DescribeAlarmHistory.
*
*
* If you use SetAlarmState on a composite alarm, the composite alarm is not guaranteed to return to
* its actual state. It returns to its actual state only once any of its children alarms change state. It is also
* reevaluated if you update its configuration.
*
*
* If an alarm triggers EC2 Auto Scaling policies or application Auto Scaling policies, you must include information
* in the StateReasonData parameter to enable the policy to take the correct action.
*
*
* @param setAlarmStateRequest
* @return Result of the SetAlarmState operation returned by the service.
* @throws ResourceNotFoundException
* The named resource does not exist.
* @throws InvalidFormatException
* Data was not syntactically valid JSON.
* @sample AmazonCloudWatch.SetAlarmState
* @see AWS API
* Documentation
*/
SetAlarmStateResult setAlarmState(SetAlarmStateRequest setAlarmStateRequest);
/**
*
* Assigns one or more tags (key-value pairs) to the specified CloudWatch resource. Currently, the only CloudWatch
* resources that can be tagged are alarms and Contributor Insights rules.
*
*
* Tags can help you organize and categorize your resources. You can also use them to scope user permissions by
* granting a user permission to access or change only resources with certain tag values.
*
*
* Tags don't have any semantic meaning to AWS and are interpreted strictly as strings of characters.
*
*
* You can use the TagResource action with an alarm that already has tags. If you specify a new tag key
* for the alarm, this tag is appended to the list of tags associated with the alarm. If you specify a tag key that
* is already associated with the alarm, the new tag value that you specify replaces the previous value for that
* tag.
*
*
* You can associate as many as 50 tags with a CloudWatch resource.
*
*
* @param tagResourceRequest
* @return Result of the TagResource operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws ResourceNotFoundException
* The named resource does not exist.
* @throws ConcurrentModificationException
* More than one process tried to modify a resource at the same time.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @sample AmazonCloudWatch.TagResource
* @see AWS API
* Documentation
*/
TagResourceResult tagResource(TagResourceRequest tagResourceRequest);
/**
*
* Removes one or more tags from the specified resource.
*
*
* @param untagResourceRequest
* @return Result of the UntagResource operation returned by the service.
* @throws InvalidParameterValueException
* The value of an input parameter is bad or out-of-range.
* @throws ResourceNotFoundException
* The named resource does not exist.
* @throws ConcurrentModificationException
* More than one process tried to modify a resource at the same time.
* @throws InternalServiceException
* Request processing has failed due to some unknown error, exception, or failure.
* @sample AmazonCloudWatch.UntagResource
* @see AWS API
* Documentation
*/
UntagResourceResult untagResource(UntagResourceRequest untagResourceRequest);
/**
* Shuts down this client object, releasing any resources that might be held open. This is an optional method, and
* callers are not expected to call it, but can if they want to explicitly release any open resources. Once a client
* has been shutdown, it should not be used to make any more requests.
*/
void shutdown();
/**
* Returns additional metadata for a previously executed successful request, typically used for debugging issues
* where a service isn't acting as expected. This data isn't considered part of the result data returned by an
* operation, so it's available through this separate, diagnostic interface.
*
* Response metadata is only cached for a limited period of time, so if you need to access this extra diagnostic
* information for an executed request, you should use this method to retrieve it as soon as possible after
* executing a request.
*
* @param request
* The originally executed request.
*
* @return The response metadata for the specified request, or null if none is available.
*/
ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request);
AmazonCloudWatchWaiters waiters();
}