com.amazonaws.services.cognitoidp.model.AdminCreateUserRequest Maven / Gradle / Ivy
/*
* Copyright 2019-2024 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with
* the License. A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions
* and limitations under the License.
*/
package com.amazonaws.services.cognitoidp.model;
import java.io.Serializable;
import javax.annotation.Generated;
import com.amazonaws.AmazonWebServiceRequest;
/**
*
* Represents the request to create a user in the specified user pool.
*
*
* @see AWS API
* Documentation
*/
@Generated("com.amazonaws:aws-java-sdk-code-generator")
public class AdminCreateUserRequest extends com.amazonaws.AmazonWebServiceRequest implements Serializable, Cloneable {
/**
*
* The user pool ID for the user pool where the user will be created.
*
*/
private String userPoolId;
/**
*
* The value that you want to set as the username sign-in attribute. The following conditions apply to the username
* parameter.
*
*
* -
*
* The username can't be a duplicate of another username in the same user pool.
*
*
* -
*
* You can't change the value of a username after you create it.
*
*
* -
*
* You can only provide a value if usernames are a valid sign-in attribute for your user pool. If your user pool
* only supports phone numbers or email addresses as sign-in attributes, Amazon Cognito automatically generates a
* username value. For more information, see Customizing sign-in attributes.
*
*
*
*/
private String username;
/**
*
* An array of name-value pairs that contain user attributes and attribute values to be set for the user to be
* created. You can create a user without specifying any attributes other than Username. However, any
* attributes that you specify as required (when creating a user pool or in the Attributes tab of the
* console) either you should supply (in your call to AdminCreateUser) or the user should supply (when
* they sign up in response to your welcome message).
*
*
* For custom attributes, you must prepend the custom: prefix to the attribute name.
*
*
* To send a message inviting the user to sign up, you must specify the user's email address or phone number. You
* can do this in your call to AdminCreateUser or in the Users tab of the Amazon Cognito console for managing
* your user pools.
*
*
* In your call to AdminCreateUser, you can set the email_verified attribute to
* True, and you can set the phone_number_verified attribute to True. You can
* also do this by calling AdminUpdateUserAttributes.
*
*
* -
*
* email: The email address of the user to whom the message that contains the code and username will be sent.
* Required if the email_verified attribute is set to True, or if "EMAIL" is
* specified in the DesiredDeliveryMediums parameter.
*
*
* -
*
* phone_number: The phone number of the user to whom the message that contains the code and username will be
* sent. Required if the phone_number_verified attribute is set to True, or if
* "SMS" is specified in the DesiredDeliveryMediums parameter.
*
*
*
*/
private java.util.List userAttributes;
/**
*
* Temporary user attributes that contribute to the outcomes of your pre sign-up Lambda trigger. This set of
* key-value pairs are for custom validation of information that you collect from your users but don't need to
* retain.
*
*
* Your Lambda function can analyze this additional data and act on it. Your function might perform external API
* operations like logging user attributes and validation data to Amazon CloudWatch Logs. Validation data might also
* affect the response that your function returns to Amazon Cognito, like automatically confirming the user if they
* sign up from within your network.
*
*
* For more information about the pre sign-up Lambda trigger, see Pre sign-up
* Lambda trigger.
*
*/
private java.util.List validationData;
/**
*
* The user's temporary password. This password must conform to the password policy that you specified when you
* created the user pool.
*
*
* The temporary password is valid only once. To complete the Admin Create User flow, the user must enter the
* temporary password in the sign-in page, along with a new password to be used in all future sign-ins.
*
*
* This parameter isn't required. If you don't specify a value, Amazon Cognito generates one for you.
*
*
* The temporary password can only be used until the user account expiration limit that you set for your user pool.
* To reset the account after that time limit, you must call AdminCreateUser again and specify
* RESEND for the MessageAction parameter.
*
*/
private String temporaryPassword;
/**
*
* This parameter is used only if the phone_number_verified or email_verified attribute is
* set to True. Otherwise, it is ignored.
*
*
* If this parameter is set to True and the phone number or email address specified in the
* UserAttributes parameter already exists as an alias with a different user, the API call will migrate the alias
* from the previous user to the newly created user. The previous user will no longer be able to log in using that
* alias.
*
*
* If this parameter is set to False, the API throws an AliasExistsException error if the
* alias already exists. The default value is False.
*
*/
private Boolean forceAliasCreation;
/**
*
* Set to RESEND to resend the invitation message to a user that already exists and reset the
* expiration limit on the user's account. Set to SUPPRESS to suppress sending the message. You can
* specify only one value.
*
*/
private String messageAction;
/**
*
* Specify "EMAIL" if email will be used to send the welcome message. Specify "SMS" if the
* phone number will be used. The default value is "SMS". You can specify more than one value.
*
*/
private java.util.List desiredDeliveryMediums;
/**
*
* A map of custom key-value pairs that you can provide as input for any custom workflows that this action triggers.
*
*
* You create custom workflows by assigning Lambda functions to user pool triggers. When you use the AdminCreateUser
* API action, Amazon Cognito invokes the function that is assigned to the pre sign-up trigger. When Amazon
* Cognito invokes this function, it passes a JSON payload, which the function receives as input. This payload
* contains a clientMetadata attribute, which provides the data that you assigned to the ClientMetadata
* parameter in your AdminCreateUser request. In your function code in Lambda, you can process the
* clientMetadata value to enhance your workflow for your specific needs.
*
*
* For more information, see Customizing user pool Workflows with Lambda Triggers in the Amazon Cognito Developer Guide.
*
*
*
* When you use the ClientMetadata parameter, remember that Amazon Cognito won't do the following:
*
*
* -
*
* Store the ClientMetadata value. This data is available only to Lambda triggers that are assigned to a user pool
* to support custom workflows. If your user pool configuration doesn't include triggers, the ClientMetadata
* parameter serves no purpose.
*
*
* -
*
* Validate the ClientMetadata value.
*
*
* -
*
* Encrypt the ClientMetadata value. Don't use Amazon Cognito to provide sensitive information.
*
*
*
*
*/
private java.util.Map clientMetadata;
/**
*
* The user pool ID for the user pool where the user will be created.
*
*
* @param userPoolId
* The user pool ID for the user pool where the user will be created.
*/
public void setUserPoolId(String userPoolId) {
this.userPoolId = userPoolId;
}
/**
*
* The user pool ID for the user pool where the user will be created.
*
*
* @return The user pool ID for the user pool where the user will be created.
*/
public String getUserPoolId() {
return this.userPoolId;
}
/**
*
* The user pool ID for the user pool where the user will be created.
*
*
* @param userPoolId
* The user pool ID for the user pool where the user will be created.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public AdminCreateUserRequest withUserPoolId(String userPoolId) {
setUserPoolId(userPoolId);
return this;
}
/**
*
* The value that you want to set as the username sign-in attribute. The following conditions apply to the username
* parameter.
*
*
* -
*
* The username can't be a duplicate of another username in the same user pool.
*
*
* -
*
* You can't change the value of a username after you create it.
*
*
* -
*
* You can only provide a value if usernames are a valid sign-in attribute for your user pool. If your user pool
* only supports phone numbers or email addresses as sign-in attributes, Amazon Cognito automatically generates a
* username value. For more information, see Customizing sign-in attributes.
*
*
*
*
* @param username
* The value that you want to set as the username sign-in attribute. The following conditions apply to the
* username parameter.
*
* -
*
* The username can't be a duplicate of another username in the same user pool.
*
*
* -
*
* You can't change the value of a username after you create it.
*
*
* -
*
* You can only provide a value if usernames are a valid sign-in attribute for your user pool. If your user
* pool only supports phone numbers or email addresses as sign-in attributes, Amazon Cognito automatically
* generates a username value. For more information, see Customizing sign-in attributes.
*
*
*/
public void setUsername(String username) {
this.username = username;
}
/**
*
* The value that you want to set as the username sign-in attribute. The following conditions apply to the username
* parameter.
*
*
* -
*
* The username can't be a duplicate of another username in the same user pool.
*
*
* -
*
* You can't change the value of a username after you create it.
*
*
* -
*
* You can only provide a value if usernames are a valid sign-in attribute for your user pool. If your user pool
* only supports phone numbers or email addresses as sign-in attributes, Amazon Cognito automatically generates a
* username value. For more information, see Customizing sign-in attributes.
*
*
*
*
* @return The value that you want to set as the username sign-in attribute. The following conditions apply to the
* username parameter.
*
* -
*
* The username can't be a duplicate of another username in the same user pool.
*
*
* -
*
* You can't change the value of a username after you create it.
*
*
* -
*
* You can only provide a value if usernames are a valid sign-in attribute for your user pool. If your user
* pool only supports phone numbers or email addresses as sign-in attributes, Amazon Cognito automatically
* generates a username value. For more information, see Customizing sign-in attributes.
*
*
*/
public String getUsername() {
return this.username;
}
/**
*
* The value that you want to set as the username sign-in attribute. The following conditions apply to the username
* parameter.
*
*
* -
*
* The username can't be a duplicate of another username in the same user pool.
*
*
* -
*
* You can't change the value of a username after you create it.
*
*
* -
*
* You can only provide a value if usernames are a valid sign-in attribute for your user pool. If your user pool
* only supports phone numbers or email addresses as sign-in attributes, Amazon Cognito automatically generates a
* username value. For more information, see Customizing sign-in attributes.
*
*
*
*
* @param username
* The value that you want to set as the username sign-in attribute. The following conditions apply to the
* username parameter.
*
* -
*
* The username can't be a duplicate of another username in the same user pool.
*
*
* -
*
* You can't change the value of a username after you create it.
*
*
* -
*
* You can only provide a value if usernames are a valid sign-in attribute for your user pool. If your user
* pool only supports phone numbers or email addresses as sign-in attributes, Amazon Cognito automatically
* generates a username value. For more information, see Customizing sign-in attributes.
*
*
* @return Returns a reference to this object so that method calls can be chained together.
*/
public AdminCreateUserRequest withUsername(String username) {
setUsername(username);
return this;
}
/**
*
* An array of name-value pairs that contain user attributes and attribute values to be set for the user to be
* created. You can create a user without specifying any attributes other than Username. However, any
* attributes that you specify as required (when creating a user pool or in the Attributes tab of the
* console) either you should supply (in your call to AdminCreateUser) or the user should supply (when
* they sign up in response to your welcome message).
*
*
* For custom attributes, you must prepend the custom: prefix to the attribute name.
*
*
* To send a message inviting the user to sign up, you must specify the user's email address or phone number. You
* can do this in your call to AdminCreateUser or in the Users tab of the Amazon Cognito console for managing
* your user pools.
*
*
* In your call to AdminCreateUser, you can set the email_verified attribute to
* True, and you can set the phone_number_verified attribute to True. You can
* also do this by calling AdminUpdateUserAttributes.
*
*
* -
*
* email: The email address of the user to whom the message that contains the code and username will be sent.
* Required if the email_verified attribute is set to True, or if "EMAIL" is
* specified in the DesiredDeliveryMediums parameter.
*
*
* -
*
* phone_number: The phone number of the user to whom the message that contains the code and username will be
* sent. Required if the phone_number_verified attribute is set to True, or if
* "SMS" is specified in the DesiredDeliveryMediums parameter.
*
*
*
*
* @return An array of name-value pairs that contain user attributes and attribute values to be set for the user to
* be created. You can create a user without specifying any attributes other than Username.
* However, any attributes that you specify as required (when creating a user pool or in the
* Attributes tab of the console) either you should supply (in your call to
* AdminCreateUser) or the user should supply (when they sign up in response to your welcome
* message).
*
* For custom attributes, you must prepend the custom: prefix to the attribute name.
*
*
* To send a message inviting the user to sign up, you must specify the user's email address or phone
* number. You can do this in your call to AdminCreateUser or in the Users tab of the Amazon Cognito
* console for managing your user pools.
*
*
* In your call to AdminCreateUser, you can set the email_verified attribute to
* True, and you can set the phone_number_verified attribute to True.
* You can also do this by calling AdminUpdateUserAttributes.
*
*
* -
*
* email: The email address of the user to whom the message that contains the code and username will
* be sent. Required if the email_verified attribute is set to True, or if
* "EMAIL" is specified in the DesiredDeliveryMediums parameter.
*
*
* -
*
* phone_number: The phone number of the user to whom the message that contains the code and username
* will be sent. Required if the phone_number_verified attribute is set to True,
* or if "SMS" is specified in the DesiredDeliveryMediums parameter.
*
*
*/
public java.util.List getUserAttributes() {
return userAttributes;
}
/**
*
* An array of name-value pairs that contain user attributes and attribute values to be set for the user to be
* created. You can create a user without specifying any attributes other than Username. However, any
* attributes that you specify as required (when creating a user pool or in the Attributes tab of the
* console) either you should supply (in your call to AdminCreateUser) or the user should supply (when
* they sign up in response to your welcome message).
*
*
* For custom attributes, you must prepend the custom: prefix to the attribute name.
*
*
* To send a message inviting the user to sign up, you must specify the user's email address or phone number. You
* can do this in your call to AdminCreateUser or in the Users tab of the Amazon Cognito console for managing
* your user pools.
*
*
* In your call to AdminCreateUser, you can set the email_verified attribute to
* True, and you can set the phone_number_verified attribute to True. You can
* also do this by calling AdminUpdateUserAttributes.
*
*
* -
*
* email: The email address of the user to whom the message that contains the code and username will be sent.
* Required if the email_verified attribute is set to True, or if "EMAIL" is
* specified in the DesiredDeliveryMediums parameter.
*
*
* -
*
* phone_number: The phone number of the user to whom the message that contains the code and username will be
* sent. Required if the phone_number_verified attribute is set to True, or if
* "SMS" is specified in the DesiredDeliveryMediums parameter.
*
*
*
*
* @param userAttributes
* An array of name-value pairs that contain user attributes and attribute values to be set for the user to
* be created. You can create a user without specifying any attributes other than Username.
* However, any attributes that you specify as required (when creating a user pool or in the
* Attributes tab of the console) either you should supply (in your call to
* AdminCreateUser) or the user should supply (when they sign up in response to your welcome
* message).
*
* For custom attributes, you must prepend the custom: prefix to the attribute name.
*
*
* To send a message inviting the user to sign up, you must specify the user's email address or phone number.
* You can do this in your call to AdminCreateUser or in the Users tab of the Amazon Cognito console
* for managing your user pools.
*
*
* In your call to AdminCreateUser, you can set the email_verified attribute to
* True, and you can set the phone_number_verified attribute to True.
* You can also do this by calling AdminUpdateUserAttributes.
*
*
* -
*
* email: The email address of the user to whom the message that contains the code and username will
* be sent. Required if the email_verified attribute is set to True, or if
* "EMAIL" is specified in the DesiredDeliveryMediums parameter.
*
*
* -
*
* phone_number: The phone number of the user to whom the message that contains the code and username
* will be sent. Required if the phone_number_verified attribute is set to True, or
* if "SMS" is specified in the DesiredDeliveryMediums parameter.
*
*
*/
public void setUserAttributes(java.util.Collection userAttributes) {
if (userAttributes == null) {
this.userAttributes = null;
return;
}
this.userAttributes = new java.util.ArrayList(userAttributes);
}
/**
*
* An array of name-value pairs that contain user attributes and attribute values to be set for the user to be
* created. You can create a user without specifying any attributes other than Username. However, any
* attributes that you specify as required (when creating a user pool or in the Attributes tab of the
* console) either you should supply (in your call to AdminCreateUser) or the user should supply (when
* they sign up in response to your welcome message).
*
*
* For custom attributes, you must prepend the custom: prefix to the attribute name.
*
*
* To send a message inviting the user to sign up, you must specify the user's email address or phone number. You
* can do this in your call to AdminCreateUser or in the Users tab of the Amazon Cognito console for managing
* your user pools.
*
*
* In your call to AdminCreateUser, you can set the email_verified attribute to
* True, and you can set the phone_number_verified attribute to True. You can
* also do this by calling AdminUpdateUserAttributes.
*
*
* -
*
* email: The email address of the user to whom the message that contains the code and username will be sent.
* Required if the email_verified attribute is set to True, or if "EMAIL" is
* specified in the DesiredDeliveryMediums parameter.
*
*
* -
*
* phone_number: The phone number of the user to whom the message that contains the code and username will be
* sent. Required if the phone_number_verified attribute is set to True, or if
* "SMS" is specified in the DesiredDeliveryMediums parameter.
*
*
*
*
* NOTE: This method appends the values to the existing list (if any). Use
* {@link #setUserAttributes(java.util.Collection)} or {@link #withUserAttributes(java.util.Collection)} if you want
* to override the existing values.
*
*
* @param userAttributes
* An array of name-value pairs that contain user attributes and attribute values to be set for the user to
* be created. You can create a user without specifying any attributes other than Username.
* However, any attributes that you specify as required (when creating a user pool or in the
* Attributes tab of the console) either you should supply (in your call to
* AdminCreateUser) or the user should supply (when they sign up in response to your welcome
* message).
*
* For custom attributes, you must prepend the custom: prefix to the attribute name.
*
*
* To send a message inviting the user to sign up, you must specify the user's email address or phone number.
* You can do this in your call to AdminCreateUser or in the Users tab of the Amazon Cognito console
* for managing your user pools.
*
*
* In your call to AdminCreateUser, you can set the email_verified attribute to
* True, and you can set the phone_number_verified attribute to True.
* You can also do this by calling AdminUpdateUserAttributes.
*
*
* -
*
* email: The email address of the user to whom the message that contains the code and username will
* be sent. Required if the email_verified attribute is set to True, or if
* "EMAIL" is specified in the DesiredDeliveryMediums parameter.
*
*
* -
*
* phone_number: The phone number of the user to whom the message that contains the code and username
* will be sent. Required if the phone_number_verified attribute is set to True, or
* if "SMS" is specified in the DesiredDeliveryMediums parameter.
*
*
* @return Returns a reference to this object so that method calls can be chained together.
*/
public AdminCreateUserRequest withUserAttributes(AttributeType... userAttributes) {
if (this.userAttributes == null) {
setUserAttributes(new java.util.ArrayList(userAttributes.length));
}
for (AttributeType ele : userAttributes) {
this.userAttributes.add(ele);
}
return this;
}
/**
*
* An array of name-value pairs that contain user attributes and attribute values to be set for the user to be
* created. You can create a user without specifying any attributes other than Username. However, any
* attributes that you specify as required (when creating a user pool or in the Attributes tab of the
* console) either you should supply (in your call to AdminCreateUser) or the user should supply (when
* they sign up in response to your welcome message).
*
*
* For custom attributes, you must prepend the custom: prefix to the attribute name.
*
*
* To send a message inviting the user to sign up, you must specify the user's email address or phone number. You
* can do this in your call to AdminCreateUser or in the Users tab of the Amazon Cognito console for managing
* your user pools.
*
*
* In your call to AdminCreateUser, you can set the email_verified attribute to
* True, and you can set the phone_number_verified attribute to True. You can
* also do this by calling AdminUpdateUserAttributes.
*
*
* -
*
* email: The email address of the user to whom the message that contains the code and username will be sent.
* Required if the email_verified attribute is set to True, or if "EMAIL" is
* specified in the DesiredDeliveryMediums parameter.
*
*
* -
*
* phone_number: The phone number of the user to whom the message that contains the code and username will be
* sent. Required if the phone_number_verified attribute is set to True, or if
* "SMS" is specified in the DesiredDeliveryMediums parameter.
*
*
*
*
* @param userAttributes
* An array of name-value pairs that contain user attributes and attribute values to be set for the user to
* be created. You can create a user without specifying any attributes other than Username.
* However, any attributes that you specify as required (when creating a user pool or in the
* Attributes tab of the console) either you should supply (in your call to
* AdminCreateUser) or the user should supply (when they sign up in response to your welcome
* message).
*
* For custom attributes, you must prepend the custom: prefix to the attribute name.
*
*
* To send a message inviting the user to sign up, you must specify the user's email address or phone number.
* You can do this in your call to AdminCreateUser or in the Users tab of the Amazon Cognito console
* for managing your user pools.
*
*
* In your call to AdminCreateUser, you can set the email_verified attribute to
* True, and you can set the phone_number_verified attribute to True.
* You can also do this by calling AdminUpdateUserAttributes.
*
*
* -
*
* email: The email address of the user to whom the message that contains the code and username will
* be sent. Required if the email_verified attribute is set to True, or if
* "EMAIL" is specified in the DesiredDeliveryMediums parameter.
*
*
* -
*
* phone_number: The phone number of the user to whom the message that contains the code and username
* will be sent. Required if the phone_number_verified attribute is set to True, or
* if "SMS" is specified in the DesiredDeliveryMediums parameter.
*
*
* @return Returns a reference to this object so that method calls can be chained together.
*/
public AdminCreateUserRequest withUserAttributes(java.util.Collection userAttributes) {
setUserAttributes(userAttributes);
return this;
}
/**
*
* Temporary user attributes that contribute to the outcomes of your pre sign-up Lambda trigger. This set of
* key-value pairs are for custom validation of information that you collect from your users but don't need to
* retain.
*
*
* Your Lambda function can analyze this additional data and act on it. Your function might perform external API
* operations like logging user attributes and validation data to Amazon CloudWatch Logs. Validation data might also
* affect the response that your function returns to Amazon Cognito, like automatically confirming the user if they
* sign up from within your network.
*
*
* For more information about the pre sign-up Lambda trigger, see Pre sign-up
* Lambda trigger.
*
*
* @return Temporary user attributes that contribute to the outcomes of your pre sign-up Lambda trigger. This set of
* key-value pairs are for custom validation of information that you collect from your users but don't need
* to retain.
*
* Your Lambda function can analyze this additional data and act on it. Your function might perform external
* API operations like logging user attributes and validation data to Amazon CloudWatch Logs. Validation
* data might also affect the response that your function returns to Amazon Cognito, like automatically
* confirming the user if they sign up from within your network.
*
*
* For more information about the pre sign-up Lambda trigger, see Pre
* sign-up Lambda trigger.
*/
public java.util.List getValidationData() {
return validationData;
}
/**
*
* Temporary user attributes that contribute to the outcomes of your pre sign-up Lambda trigger. This set of
* key-value pairs are for custom validation of information that you collect from your users but don't need to
* retain.
*
*
* Your Lambda function can analyze this additional data and act on it. Your function might perform external API
* operations like logging user attributes and validation data to Amazon CloudWatch Logs. Validation data might also
* affect the response that your function returns to Amazon Cognito, like automatically confirming the user if they
* sign up from within your network.
*
*
* For more information about the pre sign-up Lambda trigger, see Pre sign-up
* Lambda trigger.
*
*
* @param validationData
* Temporary user attributes that contribute to the outcomes of your pre sign-up Lambda trigger. This set of
* key-value pairs are for custom validation of information that you collect from your users but don't need
* to retain.
*
* Your Lambda function can analyze this additional data and act on it. Your function might perform external
* API operations like logging user attributes and validation data to Amazon CloudWatch Logs. Validation data
* might also affect the response that your function returns to Amazon Cognito, like automatically confirming
* the user if they sign up from within your network.
*
*
* For more information about the pre sign-up Lambda trigger, see Pre
* sign-up Lambda trigger.
*/
public void setValidationData(java.util.Collection validationData) {
if (validationData == null) {
this.validationData = null;
return;
}
this.validationData = new java.util.ArrayList(validationData);
}
/**
*
* Temporary user attributes that contribute to the outcomes of your pre sign-up Lambda trigger. This set of
* key-value pairs are for custom validation of information that you collect from your users but don't need to
* retain.
*
*
* Your Lambda function can analyze this additional data and act on it. Your function might perform external API
* operations like logging user attributes and validation data to Amazon CloudWatch Logs. Validation data might also
* affect the response that your function returns to Amazon Cognito, like automatically confirming the user if they
* sign up from within your network.
*
*
* For more information about the pre sign-up Lambda trigger, see Pre sign-up
* Lambda trigger.
*
*
* NOTE: This method appends the values to the existing list (if any). Use
* {@link #setValidationData(java.util.Collection)} or {@link #withValidationData(java.util.Collection)} if you want
* to override the existing values.
*
*
* @param validationData
* Temporary user attributes that contribute to the outcomes of your pre sign-up Lambda trigger. This set of
* key-value pairs are for custom validation of information that you collect from your users but don't need
* to retain.
*
* Your Lambda function can analyze this additional data and act on it. Your function might perform external
* API operations like logging user attributes and validation data to Amazon CloudWatch Logs. Validation data
* might also affect the response that your function returns to Amazon Cognito, like automatically confirming
* the user if they sign up from within your network.
*
*
* For more information about the pre sign-up Lambda trigger, see Pre
* sign-up Lambda trigger.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public AdminCreateUserRequest withValidationData(AttributeType... validationData) {
if (this.validationData == null) {
setValidationData(new java.util.ArrayList(validationData.length));
}
for (AttributeType ele : validationData) {
this.validationData.add(ele);
}
return this;
}
/**
*
* Temporary user attributes that contribute to the outcomes of your pre sign-up Lambda trigger. This set of
* key-value pairs are for custom validation of information that you collect from your users but don't need to
* retain.
*
*
* Your Lambda function can analyze this additional data and act on it. Your function might perform external API
* operations like logging user attributes and validation data to Amazon CloudWatch Logs. Validation data might also
* affect the response that your function returns to Amazon Cognito, like automatically confirming the user if they
* sign up from within your network.
*
*
* For more information about the pre sign-up Lambda trigger, see Pre sign-up
* Lambda trigger.
*
*
* @param validationData
* Temporary user attributes that contribute to the outcomes of your pre sign-up Lambda trigger. This set of
* key-value pairs are for custom validation of information that you collect from your users but don't need
* to retain.
*
* Your Lambda function can analyze this additional data and act on it. Your function might perform external
* API operations like logging user attributes and validation data to Amazon CloudWatch Logs. Validation data
* might also affect the response that your function returns to Amazon Cognito, like automatically confirming
* the user if they sign up from within your network.
*
*
* For more information about the pre sign-up Lambda trigger, see Pre
* sign-up Lambda trigger.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public AdminCreateUserRequest withValidationData(java.util.Collection validationData) {
setValidationData(validationData);
return this;
}
/**
*
* The user's temporary password. This password must conform to the password policy that you specified when you
* created the user pool.
*
*
* The temporary password is valid only once. To complete the Admin Create User flow, the user must enter the
* temporary password in the sign-in page, along with a new password to be used in all future sign-ins.
*
*
* This parameter isn't required. If you don't specify a value, Amazon Cognito generates one for you.
*
*
* The temporary password can only be used until the user account expiration limit that you set for your user pool.
* To reset the account after that time limit, you must call AdminCreateUser again and specify
* RESEND for the MessageAction parameter.
*
*
* @param temporaryPassword
* The user's temporary password. This password must conform to the password policy that you specified when
* you created the user pool.
*
* The temporary password is valid only once. To complete the Admin Create User flow, the user must enter the
* temporary password in the sign-in page, along with a new password to be used in all future sign-ins.
*
*
* This parameter isn't required. If you don't specify a value, Amazon Cognito generates one for you.
*
*
* The temporary password can only be used until the user account expiration limit that you set for your user
* pool. To reset the account after that time limit, you must call AdminCreateUser again and
* specify RESEND for the MessageAction parameter.
*/
public void setTemporaryPassword(String temporaryPassword) {
this.temporaryPassword = temporaryPassword;
}
/**
*
* The user's temporary password. This password must conform to the password policy that you specified when you
* created the user pool.
*
*
* The temporary password is valid only once. To complete the Admin Create User flow, the user must enter the
* temporary password in the sign-in page, along with a new password to be used in all future sign-ins.
*
*
* This parameter isn't required. If you don't specify a value, Amazon Cognito generates one for you.
*
*
* The temporary password can only be used until the user account expiration limit that you set for your user pool.
* To reset the account after that time limit, you must call AdminCreateUser again and specify
* RESEND for the MessageAction parameter.
*
*
* @return The user's temporary password. This password must conform to the password policy that you specified when
* you created the user pool.
*
* The temporary password is valid only once. To complete the Admin Create User flow, the user must enter
* the temporary password in the sign-in page, along with a new password to be used in all future sign-ins.
*
*
* This parameter isn't required. If you don't specify a value, Amazon Cognito generates one for you.
*
*
* The temporary password can only be used until the user account expiration limit that you set for your
* user pool. To reset the account after that time limit, you must call AdminCreateUser again
* and specify RESEND for the MessageAction parameter.
*/
public String getTemporaryPassword() {
return this.temporaryPassword;
}
/**
*
* The user's temporary password. This password must conform to the password policy that you specified when you
* created the user pool.
*
*
* The temporary password is valid only once. To complete the Admin Create User flow, the user must enter the
* temporary password in the sign-in page, along with a new password to be used in all future sign-ins.
*
*
* This parameter isn't required. If you don't specify a value, Amazon Cognito generates one for you.
*
*
* The temporary password can only be used until the user account expiration limit that you set for your user pool.
* To reset the account after that time limit, you must call AdminCreateUser again and specify
* RESEND for the MessageAction parameter.
*
*
* @param temporaryPassword
* The user's temporary password. This password must conform to the password policy that you specified when
* you created the user pool.
*
* The temporary password is valid only once. To complete the Admin Create User flow, the user must enter the
* temporary password in the sign-in page, along with a new password to be used in all future sign-ins.
*
*
* This parameter isn't required. If you don't specify a value, Amazon Cognito generates one for you.
*
*
* The temporary password can only be used until the user account expiration limit that you set for your user
* pool. To reset the account after that time limit, you must call AdminCreateUser again and
* specify RESEND for the MessageAction parameter.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public AdminCreateUserRequest withTemporaryPassword(String temporaryPassword) {
setTemporaryPassword(temporaryPassword);
return this;
}
/**
*
* This parameter is used only if the phone_number_verified or email_verified attribute is
* set to True. Otherwise, it is ignored.
*
*
* If this parameter is set to True and the phone number or email address specified in the
* UserAttributes parameter already exists as an alias with a different user, the API call will migrate the alias
* from the previous user to the newly created user. The previous user will no longer be able to log in using that
* alias.
*
*
* If this parameter is set to False, the API throws an AliasExistsException error if the
* alias already exists. The default value is False.
*
*
* @param forceAliasCreation
* This parameter is used only if the phone_number_verified or email_verified
* attribute is set to True. Otherwise, it is ignored.
*
* If this parameter is set to True and the phone number or email address specified in the
* UserAttributes parameter already exists as an alias with a different user, the API call will migrate the
* alias from the previous user to the newly created user. The previous user will no longer be able to log in
* using that alias.
*
*
* If this parameter is set to False, the API throws an AliasExistsException error
* if the alias already exists. The default value is False.
*/
public void setForceAliasCreation(Boolean forceAliasCreation) {
this.forceAliasCreation = forceAliasCreation;
}
/**
*
* This parameter is used only if the phone_number_verified or email_verified attribute is
* set to True. Otherwise, it is ignored.
*
*
* If this parameter is set to True and the phone number or email address specified in the
* UserAttributes parameter already exists as an alias with a different user, the API call will migrate the alias
* from the previous user to the newly created user. The previous user will no longer be able to log in using that
* alias.
*
*
* If this parameter is set to False, the API throws an AliasExistsException error if the
* alias already exists. The default value is False.
*
*
* @return This parameter is used only if the phone_number_verified or email_verified
* attribute is set to True. Otherwise, it is ignored.
*
* If this parameter is set to True and the phone number or email address specified in the
* UserAttributes parameter already exists as an alias with a different user, the API call will migrate the
* alias from the previous user to the newly created user. The previous user will no longer be able to log
* in using that alias.
*
*
* If this parameter is set to False, the API throws an AliasExistsException error
* if the alias already exists. The default value is False.
*/
public Boolean getForceAliasCreation() {
return this.forceAliasCreation;
}
/**
*
* This parameter is used only if the phone_number_verified or email_verified attribute is
* set to True. Otherwise, it is ignored.
*
*
* If this parameter is set to True and the phone number or email address specified in the
* UserAttributes parameter already exists as an alias with a different user, the API call will migrate the alias
* from the previous user to the newly created user. The previous user will no longer be able to log in using that
* alias.
*
*
* If this parameter is set to False, the API throws an AliasExistsException error if the
* alias already exists. The default value is False.
*
*
* @param forceAliasCreation
* This parameter is used only if the phone_number_verified or email_verified
* attribute is set to True. Otherwise, it is ignored.
*
* If this parameter is set to True and the phone number or email address specified in the
* UserAttributes parameter already exists as an alias with a different user, the API call will migrate the
* alias from the previous user to the newly created user. The previous user will no longer be able to log in
* using that alias.
*
*
* If this parameter is set to False, the API throws an AliasExistsException error
* if the alias already exists. The default value is False.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public AdminCreateUserRequest withForceAliasCreation(Boolean forceAliasCreation) {
setForceAliasCreation(forceAliasCreation);
return this;
}
/**
*
* This parameter is used only if the phone_number_verified or email_verified attribute is
* set to True. Otherwise, it is ignored.
*
*
* If this parameter is set to True and the phone number or email address specified in the
* UserAttributes parameter already exists as an alias with a different user, the API call will migrate the alias
* from the previous user to the newly created user. The previous user will no longer be able to log in using that
* alias.
*
*
* If this parameter is set to False, the API throws an AliasExistsException error if the
* alias already exists. The default value is False.
*
*
* @return This parameter is used only if the phone_number_verified or email_verified
* attribute is set to True. Otherwise, it is ignored.
*
* If this parameter is set to True and the phone number or email address specified in the
* UserAttributes parameter already exists as an alias with a different user, the API call will migrate the
* alias from the previous user to the newly created user. The previous user will no longer be able to log
* in using that alias.
*
*
* If this parameter is set to False, the API throws an AliasExistsException error
* if the alias already exists. The default value is False.
*/
public Boolean isForceAliasCreation() {
return this.forceAliasCreation;
}
/**
*
* Set to RESEND to resend the invitation message to a user that already exists and reset the
* expiration limit on the user's account. Set to SUPPRESS to suppress sending the message. You can
* specify only one value.
*
*
* @param messageAction
* Set to RESEND to resend the invitation message to a user that already exists and reset the
* expiration limit on the user's account. Set to SUPPRESS to suppress sending the message. You
* can specify only one value.
* @see MessageActionType
*/
public void setMessageAction(String messageAction) {
this.messageAction = messageAction;
}
/**
*
* Set to RESEND to resend the invitation message to a user that already exists and reset the
* expiration limit on the user's account. Set to SUPPRESS to suppress sending the message. You can
* specify only one value.
*
*
* @return Set to RESEND to resend the invitation message to a user that already exists and reset the
* expiration limit on the user's account. Set to SUPPRESS to suppress sending the message. You
* can specify only one value.
* @see MessageActionType
*/
public String getMessageAction() {
return this.messageAction;
}
/**
*
* Set to RESEND to resend the invitation message to a user that already exists and reset the
* expiration limit on the user's account. Set to SUPPRESS to suppress sending the message. You can
* specify only one value.
*
*
* @param messageAction
* Set to RESEND to resend the invitation message to a user that already exists and reset the
* expiration limit on the user's account. Set to SUPPRESS to suppress sending the message. You
* can specify only one value.
* @return Returns a reference to this object so that method calls can be chained together.
* @see MessageActionType
*/
public AdminCreateUserRequest withMessageAction(String messageAction) {
setMessageAction(messageAction);
return this;
}
/**
*
* Set to RESEND to resend the invitation message to a user that already exists and reset the
* expiration limit on the user's account. Set to SUPPRESS to suppress sending the message. You can
* specify only one value.
*
*
* @param messageAction
* Set to RESEND to resend the invitation message to a user that already exists and reset the
* expiration limit on the user's account. Set to SUPPRESS to suppress sending the message. You
* can specify only one value.
* @see MessageActionType
*/
public void setMessageAction(MessageActionType messageAction) {
withMessageAction(messageAction);
}
/**
*
* Set to RESEND to resend the invitation message to a user that already exists and reset the
* expiration limit on the user's account. Set to SUPPRESS to suppress sending the message. You can
* specify only one value.
*
*
* @param messageAction
* Set to RESEND to resend the invitation message to a user that already exists and reset the
* expiration limit on the user's account. Set to SUPPRESS to suppress sending the message. You
* can specify only one value.
* @return Returns a reference to this object so that method calls can be chained together.
* @see MessageActionType
*/
public AdminCreateUserRequest withMessageAction(MessageActionType messageAction) {
this.messageAction = messageAction.toString();
return this;
}
/**
*
* Specify "EMAIL" if email will be used to send the welcome message. Specify "SMS" if the
* phone number will be used. The default value is "SMS". You can specify more than one value.
*
*
* @return Specify "EMAIL" if email will be used to send the welcome message. Specify
* "SMS" if the phone number will be used. The default value is "SMS". You can
* specify more than one value.
* @see DeliveryMediumType
*/
public java.util.List getDesiredDeliveryMediums() {
return desiredDeliveryMediums;
}
/**
*
* Specify "EMAIL" if email will be used to send the welcome message. Specify "SMS" if the
* phone number will be used. The default value is "SMS". You can specify more than one value.
*
*
* @param desiredDeliveryMediums
* Specify "EMAIL" if email will be used to send the welcome message. Specify "SMS"
* if the phone number will be used. The default value is "SMS". You can specify more than one
* value.
* @see DeliveryMediumType
*/
public void setDesiredDeliveryMediums(java.util.Collection desiredDeliveryMediums) {
if (desiredDeliveryMediums == null) {
this.desiredDeliveryMediums = null;
return;
}
this.desiredDeliveryMediums = new java.util.ArrayList(desiredDeliveryMediums);
}
/**
*
* Specify "EMAIL" if email will be used to send the welcome message. Specify "SMS" if the
* phone number will be used. The default value is "SMS". You can specify more than one value.
*
*
* NOTE: This method appends the values to the existing list (if any). Use
* {@link #setDesiredDeliveryMediums(java.util.Collection)} or
* {@link #withDesiredDeliveryMediums(java.util.Collection)} if you want to override the existing values.
*
*
* @param desiredDeliveryMediums
* Specify "EMAIL" if email will be used to send the welcome message. Specify "SMS"
* if the phone number will be used. The default value is "SMS". You can specify more than one
* value.
* @return Returns a reference to this object so that method calls can be chained together.
* @see DeliveryMediumType
*/
public AdminCreateUserRequest withDesiredDeliveryMediums(String... desiredDeliveryMediums) {
if (this.desiredDeliveryMediums == null) {
setDesiredDeliveryMediums(new java.util.ArrayList(desiredDeliveryMediums.length));
}
for (String ele : desiredDeliveryMediums) {
this.desiredDeliveryMediums.add(ele);
}
return this;
}
/**
*
* Specify "EMAIL" if email will be used to send the welcome message. Specify "SMS" if the
* phone number will be used. The default value is "SMS". You can specify more than one value.
*
*
* @param desiredDeliveryMediums
* Specify "EMAIL" if email will be used to send the welcome message. Specify "SMS"
* if the phone number will be used. The default value is "SMS". You can specify more than one
* value.
* @return Returns a reference to this object so that method calls can be chained together.
* @see DeliveryMediumType
*/
public AdminCreateUserRequest withDesiredDeliveryMediums(java.util.Collection desiredDeliveryMediums) {
setDesiredDeliveryMediums(desiredDeliveryMediums);
return this;
}
/**
*
* Specify "EMAIL" if email will be used to send the welcome message. Specify "SMS" if the
* phone number will be used. The default value is "SMS". You can specify more than one value.
*
*
* @param desiredDeliveryMediums
* Specify "EMAIL" if email will be used to send the welcome message. Specify "SMS"
* if the phone number will be used. The default value is "SMS". You can specify more than one
* value.
* @return Returns a reference to this object so that method calls can be chained together.
* @see DeliveryMediumType
*/
public AdminCreateUserRequest withDesiredDeliveryMediums(DeliveryMediumType... desiredDeliveryMediums) {
java.util.ArrayList desiredDeliveryMediumsCopy = new java.util.ArrayList(desiredDeliveryMediums.length);
for (DeliveryMediumType value : desiredDeliveryMediums) {
desiredDeliveryMediumsCopy.add(value.toString());
}
if (getDesiredDeliveryMediums() == null) {
setDesiredDeliveryMediums(desiredDeliveryMediumsCopy);
} else {
getDesiredDeliveryMediums().addAll(desiredDeliveryMediumsCopy);
}
return this;
}
/**
*
* A map of custom key-value pairs that you can provide as input for any custom workflows that this action triggers.
*
*
* You create custom workflows by assigning Lambda functions to user pool triggers. When you use the AdminCreateUser
* API action, Amazon Cognito invokes the function that is assigned to the pre sign-up trigger. When Amazon
* Cognito invokes this function, it passes a JSON payload, which the function receives as input. This payload
* contains a clientMetadata attribute, which provides the data that you assigned to the ClientMetadata
* parameter in your AdminCreateUser request. In your function code in Lambda, you can process the
* clientMetadata value to enhance your workflow for your specific needs.
*
*
* For more information, see Customizing user pool Workflows with Lambda Triggers in the Amazon Cognito Developer Guide.
*
*
*
* When you use the ClientMetadata parameter, remember that Amazon Cognito won't do the following:
*
*
* -
*
* Store the ClientMetadata value. This data is available only to Lambda triggers that are assigned to a user pool
* to support custom workflows. If your user pool configuration doesn't include triggers, the ClientMetadata
* parameter serves no purpose.
*
*
* -
*
* Validate the ClientMetadata value.
*
*
* -
*
* Encrypt the ClientMetadata value. Don't use Amazon Cognito to provide sensitive information.
*
*
*
*
*
* @return A map of custom key-value pairs that you can provide as input for any custom workflows that this action
* triggers.
*
* You create custom workflows by assigning Lambda functions to user pool triggers. When you use the
* AdminCreateUser API action, Amazon Cognito invokes the function that is assigned to the pre
* sign-up trigger. When Amazon Cognito invokes this function, it passes a JSON payload, which the
* function receives as input. This payload contains a clientMetadata attribute, which provides
* the data that you assigned to the ClientMetadata parameter in your AdminCreateUser request. In your
* function code in Lambda, you can process the clientMetadata value to enhance your workflow
* for your specific needs.
*
*
* For more information, see Customizing user pool Workflows with Lambda Triggers in the Amazon Cognito Developer Guide.
*
*
*
* When you use the ClientMetadata parameter, remember that Amazon Cognito won't do the following:
*
*
* -
*
* Store the ClientMetadata value. This data is available only to Lambda triggers that are assigned to a
* user pool to support custom workflows. If your user pool configuration doesn't include triggers, the
* ClientMetadata parameter serves no purpose.
*
*
* -
*
* Validate the ClientMetadata value.
*
*
* -
*
* Encrypt the ClientMetadata value. Don't use Amazon Cognito to provide sensitive information.
*
*
*
*/
public java.util.Map getClientMetadata() {
return clientMetadata;
}
/**
*
* A map of custom key-value pairs that you can provide as input for any custom workflows that this action triggers.
*
*
* You create custom workflows by assigning Lambda functions to user pool triggers. When you use the AdminCreateUser
* API action, Amazon Cognito invokes the function that is assigned to the pre sign-up trigger. When Amazon
* Cognito invokes this function, it passes a JSON payload, which the function receives as input. This payload
* contains a clientMetadata attribute, which provides the data that you assigned to the ClientMetadata
* parameter in your AdminCreateUser request. In your function code in Lambda, you can process the
* clientMetadata value to enhance your workflow for your specific needs.
*
*
* For more information, see Customizing user pool Workflows with Lambda Triggers in the Amazon Cognito Developer Guide.
*
*
*
* When you use the ClientMetadata parameter, remember that Amazon Cognito won't do the following:
*
*
* -
*
* Store the ClientMetadata value. This data is available only to Lambda triggers that are assigned to a user pool
* to support custom workflows. If your user pool configuration doesn't include triggers, the ClientMetadata
* parameter serves no purpose.
*
*
* -
*
* Validate the ClientMetadata value.
*
*
* -
*
* Encrypt the ClientMetadata value. Don't use Amazon Cognito to provide sensitive information.
*
*
*
*
*
* @param clientMetadata
* A map of custom key-value pairs that you can provide as input for any custom workflows that this action
* triggers.
*
* You create custom workflows by assigning Lambda functions to user pool triggers. When you use the
* AdminCreateUser API action, Amazon Cognito invokes the function that is assigned to the pre sign-up
* trigger. When Amazon Cognito invokes this function, it passes a JSON payload, which the function receives
* as input. This payload contains a clientMetadata attribute, which provides the data that you
* assigned to the ClientMetadata parameter in your AdminCreateUser request. In your function code in Lambda,
* you can process the clientMetadata value to enhance your workflow for your specific needs.
*
*
* For more information, see Customizing user pool Workflows with Lambda Triggers in the Amazon Cognito Developer Guide.
*
*
*
* When you use the ClientMetadata parameter, remember that Amazon Cognito won't do the following:
*
*
* -
*
* Store the ClientMetadata value. This data is available only to Lambda triggers that are assigned to a user
* pool to support custom workflows. If your user pool configuration doesn't include triggers, the
* ClientMetadata parameter serves no purpose.
*
*
* -
*
* Validate the ClientMetadata value.
*
*
* -
*
* Encrypt the ClientMetadata value. Don't use Amazon Cognito to provide sensitive information.
*
*
*
*/
public void setClientMetadata(java.util.Map clientMetadata) {
this.clientMetadata = clientMetadata;
}
/**
*
* A map of custom key-value pairs that you can provide as input for any custom workflows that this action triggers.
*
*
* You create custom workflows by assigning Lambda functions to user pool triggers. When you use the AdminCreateUser
* API action, Amazon Cognito invokes the function that is assigned to the pre sign-up trigger. When Amazon
* Cognito invokes this function, it passes a JSON payload, which the function receives as input. This payload
* contains a clientMetadata attribute, which provides the data that you assigned to the ClientMetadata
* parameter in your AdminCreateUser request. In your function code in Lambda, you can process the
* clientMetadata value to enhance your workflow for your specific needs.
*
*
* For more information, see Customizing user pool Workflows with Lambda Triggers in the Amazon Cognito Developer Guide.
*
*
*
* When you use the ClientMetadata parameter, remember that Amazon Cognito won't do the following:
*
*
* -
*
* Store the ClientMetadata value. This data is available only to Lambda triggers that are assigned to a user pool
* to support custom workflows. If your user pool configuration doesn't include triggers, the ClientMetadata
* parameter serves no purpose.
*
*
* -
*
* Validate the ClientMetadata value.
*
*
* -
*
* Encrypt the ClientMetadata value. Don't use Amazon Cognito to provide sensitive information.
*
*
*
*
*
* @param clientMetadata
* A map of custom key-value pairs that you can provide as input for any custom workflows that this action
* triggers.
*
* You create custom workflows by assigning Lambda functions to user pool triggers. When you use the
* AdminCreateUser API action, Amazon Cognito invokes the function that is assigned to the pre sign-up
* trigger. When Amazon Cognito invokes this function, it passes a JSON payload, which the function receives
* as input. This payload contains a clientMetadata attribute, which provides the data that you
* assigned to the ClientMetadata parameter in your AdminCreateUser request. In your function code in Lambda,
* you can process the clientMetadata value to enhance your workflow for your specific needs.
*
*
* For more information, see Customizing user pool Workflows with Lambda Triggers in the Amazon Cognito Developer Guide.
*
*
*
* When you use the ClientMetadata parameter, remember that Amazon Cognito won't do the following:
*
*
* -
*
* Store the ClientMetadata value. This data is available only to Lambda triggers that are assigned to a user
* pool to support custom workflows. If your user pool configuration doesn't include triggers, the
* ClientMetadata parameter serves no purpose.
*
*
* -
*
* Validate the ClientMetadata value.
*
*
* -
*
* Encrypt the ClientMetadata value. Don't use Amazon Cognito to provide sensitive information.
*
*
*
* @return Returns a reference to this object so that method calls can be chained together.
*/
public AdminCreateUserRequest withClientMetadata(java.util.Map clientMetadata) {
setClientMetadata(clientMetadata);
return this;
}
/**
* Add a single ClientMetadata entry
*
* @see AdminCreateUserRequest#withClientMetadata
* @returns a reference to this object so that method calls can be chained together.
*/
public AdminCreateUserRequest addClientMetadataEntry(String key, String value) {
if (null == this.clientMetadata) {
this.clientMetadata = new java.util.HashMap();
}
if (this.clientMetadata.containsKey(key))
throw new IllegalArgumentException("Duplicated keys (" + key.toString() + ") are provided.");
this.clientMetadata.put(key, value);
return this;
}
/**
* Removes all the entries added into ClientMetadata.
*
* @return Returns a reference to this object so that method calls can be chained together.
*/
public AdminCreateUserRequest clearClientMetadataEntries() {
this.clientMetadata = null;
return this;
}
/**
* Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be
* redacted from this string using a placeholder value.
*
* @return A string representation of this object.
*
* @see java.lang.Object#toString()
*/
@Override
public String toString() {
StringBuilder sb = new StringBuilder();
sb.append("{");
if (getUserPoolId() != null)
sb.append("UserPoolId: ").append(getUserPoolId()).append(",");
if (getUsername() != null)
sb.append("Username: ").append("***Sensitive Data Redacted***").append(",");
if (getUserAttributes() != null)
sb.append("UserAttributes: ").append(getUserAttributes()).append(",");
if (getValidationData() != null)
sb.append("ValidationData: ").append(getValidationData()).append(",");
if (getTemporaryPassword() != null)
sb.append("TemporaryPassword: ").append("***Sensitive Data Redacted***").append(",");
if (getForceAliasCreation() != null)
sb.append("ForceAliasCreation: ").append(getForceAliasCreation()).append(",");
if (getMessageAction() != null)
sb.append("MessageAction: ").append(getMessageAction()).append(",");
if (getDesiredDeliveryMediums() != null)
sb.append("DesiredDeliveryMediums: ").append(getDesiredDeliveryMediums()).append(",");
if (getClientMetadata() != null)
sb.append("ClientMetadata: ").append(getClientMetadata());
sb.append("}");
return sb.toString();
}
@Override
public boolean equals(Object obj) {
if (this == obj)
return true;
if (obj == null)
return false;
if (obj instanceof AdminCreateUserRequest == false)
return false;
AdminCreateUserRequest other = (AdminCreateUserRequest) obj;
if (other.getUserPoolId() == null ^ this.getUserPoolId() == null)
return false;
if (other.getUserPoolId() != null && other.getUserPoolId().equals(this.getUserPoolId()) == false)
return false;
if (other.getUsername() == null ^ this.getUsername() == null)
return false;
if (other.getUsername() != null && other.getUsername().equals(this.getUsername()) == false)
return false;
if (other.getUserAttributes() == null ^ this.getUserAttributes() == null)
return false;
if (other.getUserAttributes() != null && other.getUserAttributes().equals(this.getUserAttributes()) == false)
return false;
if (other.getValidationData() == null ^ this.getValidationData() == null)
return false;
if (other.getValidationData() != null && other.getValidationData().equals(this.getValidationData()) == false)
return false;
if (other.getTemporaryPassword() == null ^ this.getTemporaryPassword() == null)
return false;
if (other.getTemporaryPassword() != null && other.getTemporaryPassword().equals(this.getTemporaryPassword()) == false)
return false;
if (other.getForceAliasCreation() == null ^ this.getForceAliasCreation() == null)
return false;
if (other.getForceAliasCreation() != null && other.getForceAliasCreation().equals(this.getForceAliasCreation()) == false)
return false;
if (other.getMessageAction() == null ^ this.getMessageAction() == null)
return false;
if (other.getMessageAction() != null && other.getMessageAction().equals(this.getMessageAction()) == false)
return false;
if (other.getDesiredDeliveryMediums() == null ^ this.getDesiredDeliveryMediums() == null)
return false;
if (other.getDesiredDeliveryMediums() != null && other.getDesiredDeliveryMediums().equals(this.getDesiredDeliveryMediums()) == false)
return false;
if (other.getClientMetadata() == null ^ this.getClientMetadata() == null)
return false;
if (other.getClientMetadata() != null && other.getClientMetadata().equals(this.getClientMetadata()) == false)
return false;
return true;
}
@Override
public int hashCode() {
final int prime = 31;
int hashCode = 1;
hashCode = prime * hashCode + ((getUserPoolId() == null) ? 0 : getUserPoolId().hashCode());
hashCode = prime * hashCode + ((getUsername() == null) ? 0 : getUsername().hashCode());
hashCode = prime * hashCode + ((getUserAttributes() == null) ? 0 : getUserAttributes().hashCode());
hashCode = prime * hashCode + ((getValidationData() == null) ? 0 : getValidationData().hashCode());
hashCode = prime * hashCode + ((getTemporaryPassword() == null) ? 0 : getTemporaryPassword().hashCode());
hashCode = prime * hashCode + ((getForceAliasCreation() == null) ? 0 : getForceAliasCreation().hashCode());
hashCode = prime * hashCode + ((getMessageAction() == null) ? 0 : getMessageAction().hashCode());
hashCode = prime * hashCode + ((getDesiredDeliveryMediums() == null) ? 0 : getDesiredDeliveryMediums().hashCode());
hashCode = prime * hashCode + ((getClientMetadata() == null) ? 0 : getClientMetadata().hashCode());
return hashCode;
}
@Override
public AdminCreateUserRequest clone() {
return (AdminCreateUserRequest) super.clone();
}
}