com.amazonaws.services.dynamodbv2.model.QueryRequest Maven / Gradle / Ivy
/*
* Copyright 2010-2016 Amazon.com, Inc. or its affiliates. All Rights
* Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License").
* You may not use this file except in compliance with the License.
* A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
* express or implied. See the License for the specific language governing
* permissions and limitations under the License.
*/
package com.amazonaws.services.dynamodbv2.model;
import java.io.Serializable;
import com.amazonaws.AmazonWebServiceRequest;
/**
*
* Represents the input of a Query operation.
*
*/
public class QueryRequest extends AmazonWebServiceRequest implements
Serializable, Cloneable {
/**
*
* The name of the table containing the requested items.
*
*/
private String tableName;
/**
*
* The name of an index to query. This index can be any local secondary
* index or global secondary index on the table. Note that if you use the
* IndexName parameter, you must also provide TableName.
*
*/
private String indexName;
/**
*
* The attributes to be returned in the result. You can retrieve all item
* attributes, specific item attributes, the count of matching items, or in
* the case of an index, some or all of the attributes projected into the
* index.
*
*
* -
*
* ALL_ATTRIBUTES
- Returns all of the item attributes from the
* specified table or index. If you query a local secondary index, then for
* each matching item in the index DynamoDB will fetch the entire item from
* the parent table. If the index is configured to project all item
* attributes, then all of the data can be obtained from the local secondary
* index, and no fetching is required.
*
*
* -
*
* ALL_PROJECTED_ATTRIBUTES
- Allowed only when querying an
* index. Retrieves all attributes that have been projected into the index.
* If the index is configured to project all attributes, this return value
* is equivalent to specifying ALL_ATTRIBUTES
.
*
*
* -
*
* COUNT
- Returns the number of matching items, rather than
* the matching items themselves.
*
*
* -
*
* SPECIFIC_ATTRIBUTES
- Returns only the attributes listed in
* AttributesToGet. This return value is equivalent to specifying
* AttributesToGet without specifying any value for Select.
*
*
* If you query a local secondary index and request only attributes that are
* projected into that index, the operation will read only the index and not
* the table. If any of the requested attributes are not projected into the
* local secondary index, DynamoDB will fetch each of these attributes from
* the parent table. This extra fetching incurs additional throughput cost
* and latency.
*
*
* If you query a global secondary index, you can only request attributes
* that are projected into the index. Global secondary index queries cannot
* fetch attributes from the parent table.
*
*
*
*
* If neither Select nor AttributesToGet are specified,
* DynamoDB defaults to ALL_ATTRIBUTES
when accessing a table,
* and ALL_PROJECTED_ATTRIBUTES
when accessing an index. You
* cannot use both Select and AttributesToGet together in a
* single request, unless the value for Select is
* SPECIFIC_ATTRIBUTES
. (This usage is equivalent to specifying
* AttributesToGet without any value for Select.)
*
*
*
* If you use the ProjectionExpression parameter, then the value for
* Select can only be SPECIFIC_ATTRIBUTES
. Any other
* value for Select will return an error.
*
*
*/
private String select;
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications
* should use ProjectionExpression instead. Do not combine legacy
* parameters and expression parameters in a single API call; otherwise,
* DynamoDB will return a ValidationException exception.
*
*
* This parameter allows you to retrieve attributes of type List or Map;
* however, it cannot retrieve individual elements within a List or a Map.
*
*
*
* The names of one or more attributes to retrieve. If no attribute names
* are provided, then all attributes will be returned. If any of the
* requested attributes are not found, they will not appear in the result.
*
*
* Note that AttributesToGet has no effect on provisioned throughput
* consumption. DynamoDB determines capacity units consumed based on item
* size, not on the amount of data that is returned to an application.
*
*
* You cannot use both AttributesToGet and Select together in
* a Query request, unless the value for Select is
* SPECIFIC_ATTRIBUTES
. (This usage is equivalent to specifying
* AttributesToGet without any value for Select.)
*
*
* If you query a local secondary index and request only attributes that are
* projected into that index, the operation will read only the index and not
* the table. If any of the requested attributes are not projected into the
* local secondary index, DynamoDB will fetch each of these attributes from
* the parent table. This extra fetching incurs additional throughput cost
* and latency.
*
*
* If you query a global secondary index, you can only request attributes
* that are projected into the index. Global secondary index queries cannot
* fetch attributes from the parent table.
*
*/
private java.util.List attributesToGet;
/**
*
* The maximum number of items to evaluate (not necessarily the number of
* matching items). If DynamoDB processes the number of items up to the
* limit while processing the results, it stops the operation and returns
* the matching values up to that point, and a key in
* LastEvaluatedKey to apply in a subsequent operation, so that you
* can pick up where you left off. Also, if the processed data set size
* exceeds 1 MB before DynamoDB reaches this limit, it stops the operation
* and returns the matching values up to the limit, and a key in
* LastEvaluatedKey to apply in a subsequent operation to continue
* the operation. For more information, see Query and Scan in the Amazon DynamoDB Developer Guide.
*
*/
private Integer limit;
/**
*
* Determines the read consistency model: If set to true
, then
* the operation uses strongly consistent reads; otherwise, the operation
* uses eventually consistent reads.
*
*
* Strongly consistent reads are not supported on global secondary indexes.
* If you query a global secondary index with ConsistentRead set to
* true
, you will receive a ValidationException.
*
*/
private Boolean consistentRead;
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications
* should use KeyConditionExpression instead. Do not combine legacy
* parameters and expression parameters in a single API call; otherwise,
* DynamoDB will return a ValidationException exception.
*
*
*
* The selection criteria for the query. For a query on a table, you can
* have conditions only on the table primary key attributes. You must
* provide the partition key name and value as an EQ
condition.
* You can optionally provide a second condition, referring to the sort key.
*
*
*
* If you don't provide a sort key condition, all of the items that match
* the partition key will be retrieved. If a FilterExpression or
* QueryFilter is present, it will be applied after the items are
* retrieved.
*
*
*
* For a query on an index, you can have conditions only on the index key
* attributes. You must provide the index partition key name and value as an
* EQ
condition. You can optionally provide a second condition,
* referring to the index sort key.
*
*
* Each KeyConditions element consists of an attribute name to
* compare, along with the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate against the
* supplied attribute. The number of values in the list depends on the
* ComparisonOperator being used.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than are based
* on ASCII character code values. For example, a
is greater
* than A
, and a
is greater than B
.
* For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
*
*
* For Binary, DynamoDB treats each byte of the binary data as unsigned when
* it compares binary values.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating attributes, for
* example, equals, greater than, less than, and so on.
*
*
* For KeyConditions, only the following comparison operators are
* supported:
*
*
* EQ | LE | LT | GE | GT | BEGINS_WITH | BETWEEN
*
*
* The following are descriptions of these comparison operators.
*
*
* -
*
* EQ
: Equal.
*
*
* AttributeValueList can contain only one AttributeValue of
* type String, Number, or Binary (not a set type). If an item contains an
* AttributeValue element of a different type than the one specified
* in the request, the value does not match. For example,
* {"S":"6"}
does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not equal {"NS":["6", "2", "1"]}
* .
*
*
* -
*
* LE
: Less than or equal.
*
*
* AttributeValueList can contain only one AttributeValue
* element of type String, Number, or Binary (not a set type). If an item
* contains an AttributeValue element of a different type than the
* one provided in the request, the value does not match. For example,
* {"S":"6"}
does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
.
*
*
* -
*
* LT
: Less than.
*
*
* AttributeValueList can contain only one AttributeValue of
* type String, Number, or Binary (not a set type). If an item contains an
* AttributeValue element of a different type than the one provided
* in the request, the value does not match. For example,
* {"S":"6"}
does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
.
*
*
* -
*
* GE
: Greater than or equal.
*
*
* AttributeValueList can contain only one AttributeValue
* element of type String, Number, or Binary (not a set type). If an item
* contains an AttributeValue element of a different type than the
* one provided in the request, the value does not match. For example,
* {"S":"6"}
does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
.
*
*
* -
*
* GT
: Greater than.
*
*
* AttributeValueList can contain only one AttributeValue
* element of type String, Number, or Binary (not a set type). If an item
* contains an AttributeValue element of a different type than the
* one provided in the request, the value does not match. For example,
* {"S":"6"}
does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
.
*
*
* -
*
* BEGINS_WITH
: Checks for a prefix.
*
*
* AttributeValueList can contain only one AttributeValue of
* type String or Binary (not a Number or a set type). The target attribute
* of the comparison must be of type String or Binary (not a Number or a set
* type).
*
*
* -
*
* BETWEEN
: Greater than or equal to the first value, and less
* than or equal to the second value.
*
*
* AttributeValueList must contain two AttributeValue elements
* of the same type, either String, Number, or Binary (not a set type). A
* target attribute matches if the target value is greater than, or equal
* to, the first element and less than, or equal to, the second element. If
* an item contains an AttributeValue element of a different type
* than the one provided in the request, the value does not match. For
* example, {"S":"6"}
does not compare to
* {"N":"6"}
. Also, {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
*
*
*
*
*
*
* For usage examples of AttributeValueList and
* ComparisonOperator, see Legacy Conditional Parameters in the Amazon DynamoDB Developer
* Guide.
*
*/
private java.util.Map keyConditions;
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications
* should use FilterExpression instead. Do not combine legacy
* parameters and expression parameters in a single API call; otherwise,
* DynamoDB will return a ValidationException exception.
*
*
*
* A condition that evaluates the query results after the items are read and
* returns only the desired values.
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* A QueryFilter is applied after the items have already been read;
* the process of filtering does not consume any additional read capacity
* units.
*
*
*
* If you provide more than one condition in the QueryFilter map,
* then by default all of the conditions must evaluate to true. In other
* words, the conditions are ANDed together. (You can use the
* ConditionalOperator parameter to OR the conditions instead. If you
* do this, then at least one of the conditions must evaluate to true,
* rather than all of them.)
*
*
* Note that QueryFilter does not allow key attributes. You cannot
* define a filter condition on a partition key or a sort key.
*
*
* Each QueryFilter element consists of an attribute name to compare,
* along with the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate against the
* supplied attribute. The number of values in the list depends on the
* operator specified in ComparisonOperator.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than are based
* on ASCII character code values. For example, a
is greater
* than A
, and a
is greater than B
.
* For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
*
*
* For type Binary, DynamoDB treats each byte of the binary data as unsigned
* when it compares binary values.
*
*
* For information on specifying data types in JSON, see JSON Data Format in the Amazon DynamoDB Developer Guide.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating attributes. For
* example, equals, greater than, less than, etc.
*
*
* The following comparison operators are available:
*
*
* EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN
*
*
* For complete descriptions of all comparison operators, see the Condition data type.
*
*
*
*/
private java.util.Map queryFilter;
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications
* should use FilterExpression instead. Do not combine legacy
* parameters and expression parameters in a single API call; otherwise,
* DynamoDB will return a ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in a QueryFilter
* map:
*
*
* -
*
* AND
- If all of the conditions evaluate to true, then the
* entire map evaluates to true.
*
*
* -
*
* OR
- If at least one of the conditions evaluate to true,
* then the entire map evaluates to true.
*
*
*
*
* If you omit ConditionalOperator, then AND
is the
* default.
*
*
* The operation will succeed only if the entire map evaluates to true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
*
*/
private String conditionalOperator;
/**
*
* Specifies the order for index traversal: If true
(default),
* the traversal is performed in ascending order; if false
, the
* traversal is performed in descending order.
*
*
* Items with the same partition key value are stored in sorted order by
* sort key. If the sort key data type is Number, the results are stored in
* numeric order. For type String, the results are stored in order of ASCII
* character code values. For type Binary, DynamoDB treats each byte of the
* binary data as unsigned.
*
*
* If ScanIndexForward is true
, DynamoDB returns the
* results in the order in which they are stored (by sort key value). This
* is the default behavior. If ScanIndexForward is false
* , DynamoDB reads the results in reverse order by sort key value, and then
* returns the results to the client.
*
*/
private Boolean scanIndexForward;
/**
*
* The primary key of the first item that this operation will evaluate. Use
* the value that was returned for LastEvaluatedKey in the previous
* operation.
*
*
* The data type for ExclusiveStartKey must be String, Number or
* Binary. No set data types are allowed.
*
*/
private java.util.Map exclusiveStartKey;
private String returnConsumedCapacity;
/**
*
* A string that identifies one or more attributes to retrieve from the
* table. These attributes can include scalars, sets, or elements of a JSON
* document. The attributes in the expression must be separated by commas.
*
*
* If no attribute names are specified, then all attributes will be
* returned. If any of the requested attributes are not found, they will not
* appear in the result.
*
*
* For more information, see Accessing Item Attributes in the Amazon DynamoDB Developer
* Guide.
*
*
*
* ProjectionExpression replaces the legacy AttributesToGet
* parameter.
*
*
*/
private String projectionExpression;
/**
*
* A string that contains conditions that DynamoDB applies after the
* Query operation, but before the data is returned to you. Items
* that do not satisfy the FilterExpression criteria are not
* returned.
*
*
*
* A FilterExpression is applied after the items have already been
* read; the process of filtering does not consume any additional read
* capacity units.
*
*
*
* For more information, see Filter Expressions in the Amazon DynamoDB Developer Guide.
*
*
*
* FilterExpression replaces the legacy QueryFilter and
* ConditionalOperator parameters.
*
*
*/
private String filterExpression;
/**
*
* The condition that specifies the key value(s) for items to be retrieved
* by the Query action.
*
*
* The condition must perform an equality test on a single partition key
* value. The condition can also perform one of several comparison tests on
* a single sort key value. Query can use
* KeyConditionExpression to retrieve one item with a given partition
* key value and sort key value, or several items that have the same
* partition key value but different sort key values.
*
*
* The partition key equality test is required, and must be specified in the
* following format:
*
*
* partitionKeyName
= :partitionkeyval
*
*
* If you also want to provide a condition for the sort key, it must be
* combined using AND with the condition for the sort key. Following
* is an example, using the = comparison operator for the sort key:
*
*
* partitionKeyName
= :partitionkeyval
* AND sortKeyName
= :sortkeyval
*
*
* Valid comparisons for the sort key condition are as follows:
*
*
* -
*
* sortKeyName
= :sortkeyval
- true if the
* sort key value is equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
* :sortkeyval
- true if the sort key value is less than
* :sortkeyval
.
*
*
* -
*
* sortKeyName
=
* :sortkeyval
- true if the sort key value is less than or
* equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
* :sortkeyval
- true if the sort key value is greater than
* :sortkeyval
.
*
*
* -
*
* sortKeyName
=
* :sortkeyval
- true if the sort key value is greater than or
* equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
BETWEEN :sortkeyval1
* AND :sortkeyval2
- true if the sort key value is
* greater than or equal to :sortkeyval1
, and less than or
* equal to :sortkeyval2
.
*
*
* -
*
* begins_with (sortKeyName
, :sortkeyval
* ) - true if the sort key value begins with a particular operand.
* (You cannot use this function with a sort key that is of type Number.)
* Note that the function name begins_with
is case-sensitive.
*
*
*
*
* Use the ExpressionAttributeValues parameter to replace tokens such
* as :partitionval
and :sortval
with actual
* values at runtime.
*
*
* You can optionally use the ExpressionAttributeNames parameter to
* replace the names of the partition key and sort key with placeholder
* tokens. This option might be necessary if an attribute name conflicts
* with a DynamoDB reserved word. For example, the following
* KeyConditionExpression parameter causes an error because
* Size is a reserved word:
*
*
* -
Size = :myval
*
*
* To work around this, define a placeholder (such a #S
) to
* represent the attribute name Size. KeyConditionExpression
* then is as follows:
*
*
* -
#S = :myval
*
*
* For a list of reserved words, see Reserved Words in the Amazon DynamoDB Developer Guide.
*
*
* For more information on ExpressionAttributeNames and
* ExpressionAttributeValues, see Using Placeholders for Attribute Names and Values in the Amazon
* DynamoDB Developer Guide.
*
*
*
* KeyConditionExpression replaces the legacy KeyConditions
* parameter.
*
*
*/
private String keyConditionExpression;
/**
*
* One or more substitution tokens for attribute names in an expression. The
* following are some use cases for using ExpressionAttributeNames:
*
*
* -
*
* To access an attribute whose name conflicts with a DynamoDB reserved
* word.
*
*
* -
*
* To create a placeholder for repeating occurrences of an attribute name in
* an expression.
*
*
* -
*
* To prevent special characters in an attribute name from being
* misinterpreted in an expression.
*
*
*
*
* Use the # character in an expression to dereference an attribute
* name. For example, consider the following attribute name:
*
*
* -
*
* Percentile
*
*
*
*
* The name of this attribute conflicts with a reserved word, so it cannot
* be used directly in an expression. (For the complete list of reserved
* words, see Reserved Words in the Amazon DynamoDB Developer Guide). To
* work around this, you could specify the following for
* ExpressionAttributeNames:
*
*
* -
*
* {"#P":"Percentile"}
*
*
*
*
* You could then use this substitution in an expression, as in this
* example:
*
*
* -
*
* #P = :val
*
*
*
*
*
* Tokens that begin with the : character are expression attribute
* values, which are placeholders for the actual value at runtime.
*
*
*
* For more information on expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer
* Guide.
*
*/
private java.util.Map expressionAttributeNames;
/**
*
* One or more values that can be substituted in an expression.
*
*
* Use the : (colon) character in an expression to dereference an
* attribute value. For example, suppose that you wanted to check whether
* the value of the ProductStatus attribute was one of the following:
*
*
* Available | Backordered | Discontinued
*
*
* You would first need to specify ExpressionAttributeValues as
* follows:
*
*
* { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
*
*
* You could then use these values in an expression, such as this:
*
*
* ProductStatus IN (:avail, :back, :disc)
*
*
* For more information on expression attribute values, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
*
*/
private java.util.Map expressionAttributeValues;
/**
* Default constructor for QueryRequest object. Callers should use the
* setter or fluent setter (with...) methods to initialize the object after
* creating it.
*/
public QueryRequest() {
}
/**
* Constructs a new QueryRequest object. Callers should use the setter or
* fluent setter (with...) methods to initialize any additional object
* members.
*
* @param tableName
* The name of the table containing the requested items.
*/
public QueryRequest(String tableName) {
setTableName(tableName);
}
/**
*
* The name of the table containing the requested items.
*
*
* @param tableName
* The name of the table containing the requested items.
*/
public void setTableName(String tableName) {
this.tableName = tableName;
}
/**
*
* The name of the table containing the requested items.
*
*
* @return The name of the table containing the requested items.
*/
public String getTableName() {
return this.tableName;
}
/**
*
* The name of the table containing the requested items.
*
*
* @param tableName
* The name of the table containing the requested items.
* @return Returns a reference to this object so that method calls can be
* chained together.
*/
public QueryRequest withTableName(String tableName) {
setTableName(tableName);
return this;
}
/**
*
* The name of an index to query. This index can be any local secondary
* index or global secondary index on the table. Note that if you use the
* IndexName parameter, you must also provide TableName.
*
*
* @param indexName
* The name of an index to query. This index can be any local
* secondary index or global secondary index on the table. Note that
* if you use the IndexName parameter, you must also provide
* TableName.
*/
public void setIndexName(String indexName) {
this.indexName = indexName;
}
/**
*
* The name of an index to query. This index can be any local secondary
* index or global secondary index on the table. Note that if you use the
* IndexName parameter, you must also provide TableName.
*
*
* @return The name of an index to query. This index can be any local
* secondary index or global secondary index on the table. Note that
* if you use the IndexName parameter, you must also provide
* TableName.
*/
public String getIndexName() {
return this.indexName;
}
/**
*
* The name of an index to query. This index can be any local secondary
* index or global secondary index on the table. Note that if you use the
* IndexName parameter, you must also provide TableName.
*
*
* @param indexName
* The name of an index to query. This index can be any local
* secondary index or global secondary index on the table. Note that
* if you use the IndexName parameter, you must also provide
* TableName.
* @return Returns a reference to this object so that method calls can be
* chained together.
*/
public QueryRequest withIndexName(String indexName) {
setIndexName(indexName);
return this;
}
/**
*
* The attributes to be returned in the result. You can retrieve all item
* attributes, specific item attributes, the count of matching items, or in
* the case of an index, some or all of the attributes projected into the
* index.
*
*
* -
*
* ALL_ATTRIBUTES
- Returns all of the item attributes from the
* specified table or index. If you query a local secondary index, then for
* each matching item in the index DynamoDB will fetch the entire item from
* the parent table. If the index is configured to project all item
* attributes, then all of the data can be obtained from the local secondary
* index, and no fetching is required.
*
*
* -
*
* ALL_PROJECTED_ATTRIBUTES
- Allowed only when querying an
* index. Retrieves all attributes that have been projected into the index.
* If the index is configured to project all attributes, this return value
* is equivalent to specifying ALL_ATTRIBUTES
.
*
*
* -
*
* COUNT
- Returns the number of matching items, rather than
* the matching items themselves.
*
*
* -
*
* SPECIFIC_ATTRIBUTES
- Returns only the attributes listed in
* AttributesToGet. This return value is equivalent to specifying
* AttributesToGet without specifying any value for Select.
*
*
* If you query a local secondary index and request only attributes that are
* projected into that index, the operation will read only the index and not
* the table. If any of the requested attributes are not projected into the
* local secondary index, DynamoDB will fetch each of these attributes from
* the parent table. This extra fetching incurs additional throughput cost
* and latency.
*
*
* If you query a global secondary index, you can only request attributes
* that are projected into the index. Global secondary index queries cannot
* fetch attributes from the parent table.
*
*
*
*
* If neither Select nor AttributesToGet are specified,
* DynamoDB defaults to ALL_ATTRIBUTES
when accessing a table,
* and ALL_PROJECTED_ATTRIBUTES
when accessing an index. You
* cannot use both Select and AttributesToGet together in a
* single request, unless the value for Select is
* SPECIFIC_ATTRIBUTES
. (This usage is equivalent to specifying
* AttributesToGet without any value for Select.)
*
*
*
* If you use the ProjectionExpression parameter, then the value for
* Select can only be SPECIFIC_ATTRIBUTES
. Any other
* value for Select will return an error.
*
*
*
* @param select
* The attributes to be returned in the result. You can retrieve all
* item attributes, specific item attributes, the count of matching
* items, or in the case of an index, some or all of the attributes
* projected into the index.
*
* -
*
* ALL_ATTRIBUTES
- Returns all of the item attributes
* from the specified table or index. If you query a local secondary
* index, then for each matching item in the index DynamoDB will
* fetch the entire item from the parent table. If the index is
* configured to project all item attributes, then all of the data
* can be obtained from the local secondary index, and no fetching is
* required.
*
*
* -
*
* ALL_PROJECTED_ATTRIBUTES
- Allowed only when querying
* an index. Retrieves all attributes that have been projected into
* the index. If the index is configured to project all attributes,
* this return value is equivalent to specifying
* ALL_ATTRIBUTES
.
*
*
* -
*
* COUNT
- Returns the number of matching items, rather
* than the matching items themselves.
*
*
* -
*
* SPECIFIC_ATTRIBUTES
- Returns only the attributes
* listed in AttributesToGet. This return value is equivalent
* to specifying AttributesToGet without specifying any value
* for Select.
*
*
* If you query a local secondary index and request only attributes
* that are projected into that index, the operation will read only
* the index and not the table. If any of the requested attributes
* are not projected into the local secondary index, DynamoDB will
* fetch each of these attributes from the parent table. This extra
* fetching incurs additional throughput cost and latency.
*
*
* If you query a global secondary index, you can only request
* attributes that are projected into the index. Global secondary
* index queries cannot fetch attributes from the parent table.
*
*
*
*
* If neither Select nor AttributesToGet are specified,
* DynamoDB defaults to ALL_ATTRIBUTES
when accessing a
* table, and ALL_PROJECTED_ATTRIBUTES
when accessing an
* index. You cannot use both Select and
* AttributesToGet together in a single request, unless the
* value for Select is SPECIFIC_ATTRIBUTES
. (This
* usage is equivalent to specifying AttributesToGet without
* any value for Select.)
*
*
*
* If you use the ProjectionExpression parameter, then the
* value for Select can only be
* SPECIFIC_ATTRIBUTES
. Any other value for
* Select will return an error.
*
* @see Select
*/
public void setSelect(String select) {
this.select = select;
}
/**
*
* The attributes to be returned in the result. You can retrieve all item
* attributes, specific item attributes, the count of matching items, or in
* the case of an index, some or all of the attributes projected into the
* index.
*
*
* -
*
* ALL_ATTRIBUTES
- Returns all of the item attributes from the
* specified table or index. If you query a local secondary index, then for
* each matching item in the index DynamoDB will fetch the entire item from
* the parent table. If the index is configured to project all item
* attributes, then all of the data can be obtained from the local secondary
* index, and no fetching is required.
*
*
* -
*
* ALL_PROJECTED_ATTRIBUTES
- Allowed only when querying an
* index. Retrieves all attributes that have been projected into the index.
* If the index is configured to project all attributes, this return value
* is equivalent to specifying ALL_ATTRIBUTES
.
*
*
* -
*
* COUNT
- Returns the number of matching items, rather than
* the matching items themselves.
*
*
* -
*
* SPECIFIC_ATTRIBUTES
- Returns only the attributes listed in
* AttributesToGet. This return value is equivalent to specifying
* AttributesToGet without specifying any value for Select.
*
*
* If you query a local secondary index and request only attributes that are
* projected into that index, the operation will read only the index and not
* the table. If any of the requested attributes are not projected into the
* local secondary index, DynamoDB will fetch each of these attributes from
* the parent table. This extra fetching incurs additional throughput cost
* and latency.
*
*
* If you query a global secondary index, you can only request attributes
* that are projected into the index. Global secondary index queries cannot
* fetch attributes from the parent table.
*
*
*
*
* If neither Select nor AttributesToGet are specified,
* DynamoDB defaults to ALL_ATTRIBUTES
when accessing a table,
* and ALL_PROJECTED_ATTRIBUTES
when accessing an index. You
* cannot use both Select and AttributesToGet together in a
* single request, unless the value for Select is
* SPECIFIC_ATTRIBUTES
. (This usage is equivalent to specifying
* AttributesToGet without any value for Select.)
*
*
*
* If you use the ProjectionExpression parameter, then the value for
* Select can only be SPECIFIC_ATTRIBUTES
. Any other
* value for Select will return an error.
*
*
*
* @return The attributes to be returned in the result. You can retrieve all
* item attributes, specific item attributes, the count of matching
* items, or in the case of an index, some or all of the attributes
* projected into the index.
*
* -
*
* ALL_ATTRIBUTES
- Returns all of the item attributes
* from the specified table or index. If you query a local secondary
* index, then for each matching item in the index DynamoDB will
* fetch the entire item from the parent table. If the index is
* configured to project all item attributes, then all of the data
* can be obtained from the local secondary index, and no fetching
* is required.
*
*
* -
*
* ALL_PROJECTED_ATTRIBUTES
- Allowed only when
* querying an index. Retrieves all attributes that have been
* projected into the index. If the index is configured to project
* all attributes, this return value is equivalent to specifying
* ALL_ATTRIBUTES
.
*
*
* -
*
* COUNT
- Returns the number of matching items, rather
* than the matching items themselves.
*
*
* -
*
* SPECIFIC_ATTRIBUTES
- Returns only the attributes
* listed in AttributesToGet. This return value is equivalent
* to specifying AttributesToGet without specifying any value
* for Select.
*
*
* If you query a local secondary index and request only attributes
* that are projected into that index, the operation will read only
* the index and not the table. If any of the requested attributes
* are not projected into the local secondary index, DynamoDB will
* fetch each of these attributes from the parent table. This extra
* fetching incurs additional throughput cost and latency.
*
*
* If you query a global secondary index, you can only request
* attributes that are projected into the index. Global secondary
* index queries cannot fetch attributes from the parent table.
*
*
*
*
* If neither Select nor AttributesToGet are
* specified, DynamoDB defaults to ALL_ATTRIBUTES
when
* accessing a table, and ALL_PROJECTED_ATTRIBUTES
when
* accessing an index. You cannot use both Select and
* AttributesToGet together in a single request, unless the
* value for Select is SPECIFIC_ATTRIBUTES
.
* (This usage is equivalent to specifying AttributesToGet
* without any value for Select.)
*
*
*
* If you use the ProjectionExpression parameter, then the
* value for Select can only be
* SPECIFIC_ATTRIBUTES
. Any other value for
* Select will return an error.
*
* @see Select
*/
public String getSelect() {
return this.select;
}
/**
*
* The attributes to be returned in the result. You can retrieve all item
* attributes, specific item attributes, the count of matching items, or in
* the case of an index, some or all of the attributes projected into the
* index.
*
*
* -
*
* ALL_ATTRIBUTES
- Returns all of the item attributes from the
* specified table or index. If you query a local secondary index, then for
* each matching item in the index DynamoDB will fetch the entire item from
* the parent table. If the index is configured to project all item
* attributes, then all of the data can be obtained from the local secondary
* index, and no fetching is required.
*
*
* -
*
* ALL_PROJECTED_ATTRIBUTES
- Allowed only when querying an
* index. Retrieves all attributes that have been projected into the index.
* If the index is configured to project all attributes, this return value
* is equivalent to specifying ALL_ATTRIBUTES
.
*
*
* -
*
* COUNT
- Returns the number of matching items, rather than
* the matching items themselves.
*
*
* -
*
* SPECIFIC_ATTRIBUTES
- Returns only the attributes listed in
* AttributesToGet. This return value is equivalent to specifying
* AttributesToGet without specifying any value for Select.
*
*
* If you query a local secondary index and request only attributes that are
* projected into that index, the operation will read only the index and not
* the table. If any of the requested attributes are not projected into the
* local secondary index, DynamoDB will fetch each of these attributes from
* the parent table. This extra fetching incurs additional throughput cost
* and latency.
*
*
* If you query a global secondary index, you can only request attributes
* that are projected into the index. Global secondary index queries cannot
* fetch attributes from the parent table.
*
*
*
*
* If neither Select nor AttributesToGet are specified,
* DynamoDB defaults to ALL_ATTRIBUTES
when accessing a table,
* and ALL_PROJECTED_ATTRIBUTES
when accessing an index. You
* cannot use both Select and AttributesToGet together in a
* single request, unless the value for Select is
* SPECIFIC_ATTRIBUTES
. (This usage is equivalent to specifying
* AttributesToGet without any value for Select.)
*
*
*
* If you use the ProjectionExpression parameter, then the value for
* Select can only be SPECIFIC_ATTRIBUTES
. Any other
* value for Select will return an error.
*
*
*
* @param select
* The attributes to be returned in the result. You can retrieve all
* item attributes, specific item attributes, the count of matching
* items, or in the case of an index, some or all of the attributes
* projected into the index.
*
* -
*
* ALL_ATTRIBUTES
- Returns all of the item attributes
* from the specified table or index. If you query a local secondary
* index, then for each matching item in the index DynamoDB will
* fetch the entire item from the parent table. If the index is
* configured to project all item attributes, then all of the data
* can be obtained from the local secondary index, and no fetching is
* required.
*
*
* -
*
* ALL_PROJECTED_ATTRIBUTES
- Allowed only when querying
* an index. Retrieves all attributes that have been projected into
* the index. If the index is configured to project all attributes,
* this return value is equivalent to specifying
* ALL_ATTRIBUTES
.
*
*
* -
*
* COUNT
- Returns the number of matching items, rather
* than the matching items themselves.
*
*
* -
*
* SPECIFIC_ATTRIBUTES
- Returns only the attributes
* listed in AttributesToGet. This return value is equivalent
* to specifying AttributesToGet without specifying any value
* for Select.
*
*
* If you query a local secondary index and request only attributes
* that are projected into that index, the operation will read only
* the index and not the table. If any of the requested attributes
* are not projected into the local secondary index, DynamoDB will
* fetch each of these attributes from the parent table. This extra
* fetching incurs additional throughput cost and latency.
*
*
* If you query a global secondary index, you can only request
* attributes that are projected into the index. Global secondary
* index queries cannot fetch attributes from the parent table.
*
*
*
*
* If neither Select nor AttributesToGet are specified,
* DynamoDB defaults to ALL_ATTRIBUTES
when accessing a
* table, and ALL_PROJECTED_ATTRIBUTES
when accessing an
* index. You cannot use both Select and
* AttributesToGet together in a single request, unless the
* value for Select is SPECIFIC_ATTRIBUTES
. (This
* usage is equivalent to specifying AttributesToGet without
* any value for Select.)
*
*
*
* If you use the ProjectionExpression parameter, then the
* value for Select can only be
* SPECIFIC_ATTRIBUTES
. Any other value for
* Select will return an error.
*
* @return Returns a reference to this object so that method calls can be
* chained together.
* @see Select
*/
public QueryRequest withSelect(String select) {
setSelect(select);
return this;
}
/**
*
* The attributes to be returned in the result. You can retrieve all item
* attributes, specific item attributes, the count of matching items, or in
* the case of an index, some or all of the attributes projected into the
* index.
*
*
* -
*
* ALL_ATTRIBUTES
- Returns all of the item attributes from the
* specified table or index. If you query a local secondary index, then for
* each matching item in the index DynamoDB will fetch the entire item from
* the parent table. If the index is configured to project all item
* attributes, then all of the data can be obtained from the local secondary
* index, and no fetching is required.
*
*
* -
*
* ALL_PROJECTED_ATTRIBUTES
- Allowed only when querying an
* index. Retrieves all attributes that have been projected into the index.
* If the index is configured to project all attributes, this return value
* is equivalent to specifying ALL_ATTRIBUTES
.
*
*
* -
*
* COUNT
- Returns the number of matching items, rather than
* the matching items themselves.
*
*
* -
*
* SPECIFIC_ATTRIBUTES
- Returns only the attributes listed in
* AttributesToGet. This return value is equivalent to specifying
* AttributesToGet without specifying any value for Select.
*
*
* If you query a local secondary index and request only attributes that are
* projected into that index, the operation will read only the index and not
* the table. If any of the requested attributes are not projected into the
* local secondary index, DynamoDB will fetch each of these attributes from
* the parent table. This extra fetching incurs additional throughput cost
* and latency.
*
*
* If you query a global secondary index, you can only request attributes
* that are projected into the index. Global secondary index queries cannot
* fetch attributes from the parent table.
*
*
*
*
* If neither Select nor AttributesToGet are specified,
* DynamoDB defaults to ALL_ATTRIBUTES
when accessing a table,
* and ALL_PROJECTED_ATTRIBUTES
when accessing an index. You
* cannot use both Select and AttributesToGet together in a
* single request, unless the value for Select is
* SPECIFIC_ATTRIBUTES
. (This usage is equivalent to specifying
* AttributesToGet without any value for Select.)
*
*
*
* If you use the ProjectionExpression parameter, then the value for
* Select can only be SPECIFIC_ATTRIBUTES
. Any other
* value for Select will return an error.
*
*
*
* @param select
* The attributes to be returned in the result. You can retrieve all
* item attributes, specific item attributes, the count of matching
* items, or in the case of an index, some or all of the attributes
* projected into the index.
*
* -
*
* ALL_ATTRIBUTES
- Returns all of the item attributes
* from the specified table or index. If you query a local secondary
* index, then for each matching item in the index DynamoDB will
* fetch the entire item from the parent table. If the index is
* configured to project all item attributes, then all of the data
* can be obtained from the local secondary index, and no fetching is
* required.
*
*
* -
*
* ALL_PROJECTED_ATTRIBUTES
- Allowed only when querying
* an index. Retrieves all attributes that have been projected into
* the index. If the index is configured to project all attributes,
* this return value is equivalent to specifying
* ALL_ATTRIBUTES
.
*
*
* -
*
* COUNT
- Returns the number of matching items, rather
* than the matching items themselves.
*
*
* -
*
* SPECIFIC_ATTRIBUTES
- Returns only the attributes
* listed in AttributesToGet. This return value is equivalent
* to specifying AttributesToGet without specifying any value
* for Select.
*
*
* If you query a local secondary index and request only attributes
* that are projected into that index, the operation will read only
* the index and not the table. If any of the requested attributes
* are not projected into the local secondary index, DynamoDB will
* fetch each of these attributes from the parent table. This extra
* fetching incurs additional throughput cost and latency.
*
*
* If you query a global secondary index, you can only request
* attributes that are projected into the index. Global secondary
* index queries cannot fetch attributes from the parent table.
*
*
*
*
* If neither Select nor AttributesToGet are specified,
* DynamoDB defaults to ALL_ATTRIBUTES
when accessing a
* table, and ALL_PROJECTED_ATTRIBUTES
when accessing an
* index. You cannot use both Select and
* AttributesToGet together in a single request, unless the
* value for Select is SPECIFIC_ATTRIBUTES
. (This
* usage is equivalent to specifying AttributesToGet without
* any value for Select.)
*
*
*
* If you use the ProjectionExpression parameter, then the
* value for Select can only be
* SPECIFIC_ATTRIBUTES
. Any other value for
* Select will return an error.
*
* @see Select
*/
public void setSelect(Select select) {
this.select = select.toString();
}
/**
*
* The attributes to be returned in the result. You can retrieve all item
* attributes, specific item attributes, the count of matching items, or in
* the case of an index, some or all of the attributes projected into the
* index.
*
*
* -
*
* ALL_ATTRIBUTES
- Returns all of the item attributes from the
* specified table or index. If you query a local secondary index, then for
* each matching item in the index DynamoDB will fetch the entire item from
* the parent table. If the index is configured to project all item
* attributes, then all of the data can be obtained from the local secondary
* index, and no fetching is required.
*
*
* -
*
* ALL_PROJECTED_ATTRIBUTES
- Allowed only when querying an
* index. Retrieves all attributes that have been projected into the index.
* If the index is configured to project all attributes, this return value
* is equivalent to specifying ALL_ATTRIBUTES
.
*
*
* -
*
* COUNT
- Returns the number of matching items, rather than
* the matching items themselves.
*
*
* -
*
* SPECIFIC_ATTRIBUTES
- Returns only the attributes listed in
* AttributesToGet. This return value is equivalent to specifying
* AttributesToGet without specifying any value for Select.
*
*
* If you query a local secondary index and request only attributes that are
* projected into that index, the operation will read only the index and not
* the table. If any of the requested attributes are not projected into the
* local secondary index, DynamoDB will fetch each of these attributes from
* the parent table. This extra fetching incurs additional throughput cost
* and latency.
*
*
* If you query a global secondary index, you can only request attributes
* that are projected into the index. Global secondary index queries cannot
* fetch attributes from the parent table.
*
*
*
*
* If neither Select nor AttributesToGet are specified,
* DynamoDB defaults to ALL_ATTRIBUTES
when accessing a table,
* and ALL_PROJECTED_ATTRIBUTES
when accessing an index. You
* cannot use both Select and AttributesToGet together in a
* single request, unless the value for Select is
* SPECIFIC_ATTRIBUTES
. (This usage is equivalent to specifying
* AttributesToGet without any value for Select.)
*
*
*
* If you use the ProjectionExpression parameter, then the value for
* Select can only be SPECIFIC_ATTRIBUTES
. Any other
* value for Select will return an error.
*
*
*
* @param select
* The attributes to be returned in the result. You can retrieve all
* item attributes, specific item attributes, the count of matching
* items, or in the case of an index, some or all of the attributes
* projected into the index.
*
* -
*
* ALL_ATTRIBUTES
- Returns all of the item attributes
* from the specified table or index. If you query a local secondary
* index, then for each matching item in the index DynamoDB will
* fetch the entire item from the parent table. If the index is
* configured to project all item attributes, then all of the data
* can be obtained from the local secondary index, and no fetching is
* required.
*
*
* -
*
* ALL_PROJECTED_ATTRIBUTES
- Allowed only when querying
* an index. Retrieves all attributes that have been projected into
* the index. If the index is configured to project all attributes,
* this return value is equivalent to specifying
* ALL_ATTRIBUTES
.
*
*
* -
*
* COUNT
- Returns the number of matching items, rather
* than the matching items themselves.
*
*
* -
*
* SPECIFIC_ATTRIBUTES
- Returns only the attributes
* listed in AttributesToGet. This return value is equivalent
* to specifying AttributesToGet without specifying any value
* for Select.
*
*
* If you query a local secondary index and request only attributes
* that are projected into that index, the operation will read only
* the index and not the table. If any of the requested attributes
* are not projected into the local secondary index, DynamoDB will
* fetch each of these attributes from the parent table. This extra
* fetching incurs additional throughput cost and latency.
*
*
* If you query a global secondary index, you can only request
* attributes that are projected into the index. Global secondary
* index queries cannot fetch attributes from the parent table.
*
*
*
*
* If neither Select nor AttributesToGet are specified,
* DynamoDB defaults to ALL_ATTRIBUTES
when accessing a
* table, and ALL_PROJECTED_ATTRIBUTES
when accessing an
* index. You cannot use both Select and
* AttributesToGet together in a single request, unless the
* value for Select is SPECIFIC_ATTRIBUTES
. (This
* usage is equivalent to specifying AttributesToGet without
* any value for Select.)
*
*
*
* If you use the ProjectionExpression parameter, then the
* value for Select can only be
* SPECIFIC_ATTRIBUTES
. Any other value for
* Select will return an error.
*
* @return Returns a reference to this object so that method calls can be
* chained together.
* @see Select
*/
public QueryRequest withSelect(Select select) {
setSelect(select);
return this;
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications
* should use ProjectionExpression instead. Do not combine legacy
* parameters and expression parameters in a single API call; otherwise,
* DynamoDB will return a ValidationException exception.
*
*
* This parameter allows you to retrieve attributes of type List or Map;
* however, it cannot retrieve individual elements within a List or a Map.
*
*
*
* The names of one or more attributes to retrieve. If no attribute names
* are provided, then all attributes will be returned. If any of the
* requested attributes are not found, they will not appear in the result.
*
*
* Note that AttributesToGet has no effect on provisioned throughput
* consumption. DynamoDB determines capacity units consumed based on item
* size, not on the amount of data that is returned to an application.
*
*
* You cannot use both AttributesToGet and Select together in
* a Query request, unless the value for Select is
* SPECIFIC_ATTRIBUTES
. (This usage is equivalent to specifying
* AttributesToGet without any value for Select.)
*
*
* If you query a local secondary index and request only attributes that are
* projected into that index, the operation will read only the index and not
* the table. If any of the requested attributes are not projected into the
* local secondary index, DynamoDB will fetch each of these attributes from
* the parent table. This extra fetching incurs additional throughput cost
* and latency.
*
*
* If you query a global secondary index, you can only request attributes
* that are projected into the index. Global secondary index queries cannot
* fetch attributes from the parent table.
*
*
* @return This is a legacy parameter, for backward compatibility. New
* applications should use ProjectionExpression instead. Do
* not combine legacy parameters and expression parameters in a
* single API call; otherwise, DynamoDB will return a
* ValidationException exception.
*
* This parameter allows you to retrieve attributes of type List or
* Map; however, it cannot retrieve individual elements within a
* List or a Map.
*
*
*
* The names of one or more attributes to retrieve. If no attribute
* names are provided, then all attributes will be returned. If any
* of the requested attributes are not found, they will not appear
* in the result.
*
*
* Note that AttributesToGet has no effect on provisioned
* throughput consumption. DynamoDB determines capacity units
* consumed based on item size, not on the amount of data that is
* returned to an application.
*
*
* You cannot use both AttributesToGet and Select
* together in a Query request, unless the value for
* Select is SPECIFIC_ATTRIBUTES
. (This usage is
* equivalent to specifying AttributesToGet without any value
* for Select.)
*
*
* If you query a local secondary index and request only attributes
* that are projected into that index, the operation will read only
* the index and not the table. If any of the requested attributes
* are not projected into the local secondary index, DynamoDB will
* fetch each of these attributes from the parent table. This extra
* fetching incurs additional throughput cost and latency.
*
*/
public java.util.List getAttributesToGet() {
return attributesToGet;
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications
* should use ProjectionExpression instead. Do not combine legacy
* parameters and expression parameters in a single API call; otherwise,
* DynamoDB will return a ValidationException exception.
*
*
* This parameter allows you to retrieve attributes of type List or Map;
* however, it cannot retrieve individual elements within a List or a Map.
*
*
*
* The names of one or more attributes to retrieve. If no attribute names
* are provided, then all attributes will be returned. If any of the
* requested attributes are not found, they will not appear in the result.
*
*
* Note that AttributesToGet has no effect on provisioned throughput
* consumption. DynamoDB determines capacity units consumed based on item
* size, not on the amount of data that is returned to an application.
*
*
* You cannot use both AttributesToGet and Select together in
* a Query request, unless the value for Select is
* SPECIFIC_ATTRIBUTES
. (This usage is equivalent to specifying
* AttributesToGet without any value for Select.)
*
*
* If you query a local secondary index and request only attributes that are
* projected into that index, the operation will read only the index and not
* the table. If any of the requested attributes are not projected into the
* local secondary index, DynamoDB will fetch each of these attributes from
* the parent table. This extra fetching incurs additional throughput cost
* and latency.
*
*
* If you query a global secondary index, you can only request attributes
* that are projected into the index. Global secondary index queries cannot
* fetch attributes from the parent table.
*
*
* @param attributesToGet
* This is a legacy parameter, for backward compatibility. New
* applications should use ProjectionExpression instead. Do
* not combine legacy parameters and expression parameters in a
* single API call; otherwise, DynamoDB will return a
* ValidationException exception.
*
* This parameter allows you to retrieve attributes of type List or
* Map; however, it cannot retrieve individual elements within a List
* or a Map.
*
*
*
* The names of one or more attributes to retrieve. If no attribute
* names are provided, then all attributes will be returned. If any
* of the requested attributes are not found, they will not appear in
* the result.
*
*
* Note that AttributesToGet has no effect on provisioned
* throughput consumption. DynamoDB determines capacity units
* consumed based on item size, not on the amount of data that is
* returned to an application.
*
*
* You cannot use both AttributesToGet and Select
* together in a Query request, unless the value for
* Select is SPECIFIC_ATTRIBUTES
. (This usage is
* equivalent to specifying AttributesToGet without any value
* for Select.)
*
*
* If you query a local secondary index and request only attributes
* that are projected into that index, the operation will read only
* the index and not the table. If any of the requested attributes
* are not projected into the local secondary index, DynamoDB will
* fetch each of these attributes from the parent table. This extra
* fetching incurs additional throughput cost and latency.
*
*/
public void setAttributesToGet(java.util.Collection attributesToGet) {
if (attributesToGet == null) {
this.attributesToGet = null;
return;
}
this.attributesToGet = new java.util.ArrayList(attributesToGet);
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications
* should use ProjectionExpression instead. Do not combine legacy
* parameters and expression parameters in a single API call; otherwise,
* DynamoDB will return a ValidationException exception.
*
*
* This parameter allows you to retrieve attributes of type List or Map;
* however, it cannot retrieve individual elements within a List or a Map.
*
*
*
* The names of one or more attributes to retrieve. If no attribute names
* are provided, then all attributes will be returned. If any of the
* requested attributes are not found, they will not appear in the result.
*
*
* Note that AttributesToGet has no effect on provisioned throughput
* consumption. DynamoDB determines capacity units consumed based on item
* size, not on the amount of data that is returned to an application.
*
*
* You cannot use both AttributesToGet and Select together in
* a Query request, unless the value for Select is
* SPECIFIC_ATTRIBUTES
. (This usage is equivalent to specifying
* AttributesToGet without any value for Select.)
*
*
* If you query a local secondary index and request only attributes that are
* projected into that index, the operation will read only the index and not
* the table. If any of the requested attributes are not projected into the
* local secondary index, DynamoDB will fetch each of these attributes from
* the parent table. This extra fetching incurs additional throughput cost
* and latency.
*
*
* If you query a global secondary index, you can only request attributes
* that are projected into the index. Global secondary index queries cannot
* fetch attributes from the parent table.
*
*
* NOTE: This method appends the values to the existing list (if
* any). Use {@link #setAttributesToGet(java.util.Collection)} or
* {@link #withAttributesToGet(java.util.Collection)} if you want to
* override the existing values.
*
*
* @param attributesToGet
* This is a legacy parameter, for backward compatibility. New
* applications should use ProjectionExpression instead. Do
* not combine legacy parameters and expression parameters in a
* single API call; otherwise, DynamoDB will return a
* ValidationException exception.
*
* This parameter allows you to retrieve attributes of type List or
* Map; however, it cannot retrieve individual elements within a List
* or a Map.
*
*
*
* The names of one or more attributes to retrieve. If no attribute
* names are provided, then all attributes will be returned. If any
* of the requested attributes are not found, they will not appear in
* the result.
*
*
* Note that AttributesToGet has no effect on provisioned
* throughput consumption. DynamoDB determines capacity units
* consumed based on item size, not on the amount of data that is
* returned to an application.
*
*
* You cannot use both AttributesToGet and Select
* together in a Query request, unless the value for
* Select is SPECIFIC_ATTRIBUTES
. (This usage is
* equivalent to specifying AttributesToGet without any value
* for Select.)
*
*
* If you query a local secondary index and request only attributes
* that are projected into that index, the operation will read only
* the index and not the table. If any of the requested attributes
* are not projected into the local secondary index, DynamoDB will
* fetch each of these attributes from the parent table. This extra
* fetching incurs additional throughput cost and latency.
*
* @return Returns a reference to this object so that method calls can be
* chained together.
*/
public QueryRequest withAttributesToGet(String... attributesToGet) {
if (this.attributesToGet == null) {
setAttributesToGet(new java.util.ArrayList(
attributesToGet.length));
}
for (String ele : attributesToGet) {
this.attributesToGet.add(ele);
}
return this;
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications
* should use ProjectionExpression instead. Do not combine legacy
* parameters and expression parameters in a single API call; otherwise,
* DynamoDB will return a ValidationException exception.
*
*
* This parameter allows you to retrieve attributes of type List or Map;
* however, it cannot retrieve individual elements within a List or a Map.
*
*
*
* The names of one or more attributes to retrieve. If no attribute names
* are provided, then all attributes will be returned. If any of the
* requested attributes are not found, they will not appear in the result.
*
*
* Note that AttributesToGet has no effect on provisioned throughput
* consumption. DynamoDB determines capacity units consumed based on item
* size, not on the amount of data that is returned to an application.
*
*
* You cannot use both AttributesToGet and Select together in
* a Query request, unless the value for Select is
* SPECIFIC_ATTRIBUTES
. (This usage is equivalent to specifying
* AttributesToGet without any value for Select.)
*
*
* If you query a local secondary index and request only attributes that are
* projected into that index, the operation will read only the index and not
* the table. If any of the requested attributes are not projected into the
* local secondary index, DynamoDB will fetch each of these attributes from
* the parent table. This extra fetching incurs additional throughput cost
* and latency.
*
*
* If you query a global secondary index, you can only request attributes
* that are projected into the index. Global secondary index queries cannot
* fetch attributes from the parent table.
*
*
* @param attributesToGet
* This is a legacy parameter, for backward compatibility. New
* applications should use ProjectionExpression instead. Do
* not combine legacy parameters and expression parameters in a
* single API call; otherwise, DynamoDB will return a
* ValidationException exception.
*
* This parameter allows you to retrieve attributes of type List or
* Map; however, it cannot retrieve individual elements within a List
* or a Map.
*
*
*
* The names of one or more attributes to retrieve. If no attribute
* names are provided, then all attributes will be returned. If any
* of the requested attributes are not found, they will not appear in
* the result.
*
*
* Note that AttributesToGet has no effect on provisioned
* throughput consumption. DynamoDB determines capacity units
* consumed based on item size, not on the amount of data that is
* returned to an application.
*
*
* You cannot use both AttributesToGet and Select
* together in a Query request, unless the value for
* Select is SPECIFIC_ATTRIBUTES
. (This usage is
* equivalent to specifying AttributesToGet without any value
* for Select.)
*
*
* If you query a local secondary index and request only attributes
* that are projected into that index, the operation will read only
* the index and not the table. If any of the requested attributes
* are not projected into the local secondary index, DynamoDB will
* fetch each of these attributes from the parent table. This extra
* fetching incurs additional throughput cost and latency.
*
* @return Returns a reference to this object so that method calls can be
* chained together.
*/
public QueryRequest withAttributesToGet(
java.util.Collection attributesToGet) {
setAttributesToGet(attributesToGet);
return this;
}
/**
*
* The maximum number of items to evaluate (not necessarily the number of
* matching items). If DynamoDB processes the number of items up to the
* limit while processing the results, it stops the operation and returns
* the matching values up to that point, and a key in
* LastEvaluatedKey to apply in a subsequent operation, so that you
* can pick up where you left off. Also, if the processed data set size
* exceeds 1 MB before DynamoDB reaches this limit, it stops the operation
* and returns the matching values up to the limit, and a key in
* LastEvaluatedKey to apply in a subsequent operation to continue
* the operation. For more information, see Query and Scan in the Amazon DynamoDB Developer Guide.
*
*
* @param limit
* The maximum number of items to evaluate (not necessarily the
* number of matching items). If DynamoDB processes the number of
* items up to the limit while processing the results, it stops the
* operation and returns the matching values up to that point, and a
* key in LastEvaluatedKey to apply in a subsequent operation,
* so that you can pick up where you left off. Also, if the processed
* data set size exceeds 1 MB before DynamoDB reaches this limit, it
* stops the operation and returns the matching values up to the
* limit, and a key in LastEvaluatedKey to apply in a
* subsequent operation to continue the operation. For more
* information, see Query and Scan in the Amazon DynamoDB Developer Guide.
*/
public void setLimit(Integer limit) {
this.limit = limit;
}
/**
*
* The maximum number of items to evaluate (not necessarily the number of
* matching items). If DynamoDB processes the number of items up to the
* limit while processing the results, it stops the operation and returns
* the matching values up to that point, and a key in
* LastEvaluatedKey to apply in a subsequent operation, so that you
* can pick up where you left off. Also, if the processed data set size
* exceeds 1 MB before DynamoDB reaches this limit, it stops the operation
* and returns the matching values up to the limit, and a key in
* LastEvaluatedKey to apply in a subsequent operation to continue
* the operation. For more information, see Query and Scan in the Amazon DynamoDB Developer Guide.
*
*
* @return The maximum number of items to evaluate (not necessarily the
* number of matching items). If DynamoDB processes the number of
* items up to the limit while processing the results, it stops the
* operation and returns the matching values up to that point, and a
* key in LastEvaluatedKey to apply in a subsequent
* operation, so that you can pick up where you left off. Also, if
* the processed data set size exceeds 1 MB before DynamoDB reaches
* this limit, it stops the operation and returns the matching
* values up to the limit, and a key in LastEvaluatedKey to
* apply in a subsequent operation to continue the operation. For
* more information, see Query and Scan in the Amazon DynamoDB Developer
* Guide.
*/
public Integer getLimit() {
return this.limit;
}
/**
*
* The maximum number of items to evaluate (not necessarily the number of
* matching items). If DynamoDB processes the number of items up to the
* limit while processing the results, it stops the operation and returns
* the matching values up to that point, and a key in
* LastEvaluatedKey to apply in a subsequent operation, so that you
* can pick up where you left off. Also, if the processed data set size
* exceeds 1 MB before DynamoDB reaches this limit, it stops the operation
* and returns the matching values up to the limit, and a key in
* LastEvaluatedKey to apply in a subsequent operation to continue
* the operation. For more information, see Query and Scan in the Amazon DynamoDB Developer Guide.
*
*
* @param limit
* The maximum number of items to evaluate (not necessarily the
* number of matching items). If DynamoDB processes the number of
* items up to the limit while processing the results, it stops the
* operation and returns the matching values up to that point, and a
* key in LastEvaluatedKey to apply in a subsequent operation,
* so that you can pick up where you left off. Also, if the processed
* data set size exceeds 1 MB before DynamoDB reaches this limit, it
* stops the operation and returns the matching values up to the
* limit, and a key in LastEvaluatedKey to apply in a
* subsequent operation to continue the operation. For more
* information, see Query and Scan in the Amazon DynamoDB Developer Guide.
* @return Returns a reference to this object so that method calls can be
* chained together.
*/
public QueryRequest withLimit(Integer limit) {
setLimit(limit);
return this;
}
/**
*
* Determines the read consistency model: If set to true
, then
* the operation uses strongly consistent reads; otherwise, the operation
* uses eventually consistent reads.
*
*
* Strongly consistent reads are not supported on global secondary indexes.
* If you query a global secondary index with ConsistentRead set to
* true
, you will receive a ValidationException.
*
*
* @param consistentRead
* Determines the read consistency model: If set to true
* , then the operation uses strongly consistent reads; otherwise,
* the operation uses eventually consistent reads.
*
* Strongly consistent reads are not supported on global secondary
* indexes. If you query a global secondary index with
* ConsistentRead set to true
, you will receive a
* ValidationException.
*/
public void setConsistentRead(Boolean consistentRead) {
this.consistentRead = consistentRead;
}
/**
*
* Determines the read consistency model: If set to true
, then
* the operation uses strongly consistent reads; otherwise, the operation
* uses eventually consistent reads.
*
*
* Strongly consistent reads are not supported on global secondary indexes.
* If you query a global secondary index with ConsistentRead set to
* true
, you will receive a ValidationException.
*
*
* @return Determines the read consistency model: If set to
* true
, then the operation uses strongly consistent
* reads; otherwise, the operation uses eventually consistent
* reads.
*
* Strongly consistent reads are not supported on global secondary
* indexes. If you query a global secondary index with
* ConsistentRead set to true
, you will receive
* a ValidationException.
*/
public Boolean getConsistentRead() {
return this.consistentRead;
}
/**
*
* Determines the read consistency model: If set to true
, then
* the operation uses strongly consistent reads; otherwise, the operation
* uses eventually consistent reads.
*
*
* Strongly consistent reads are not supported on global secondary indexes.
* If you query a global secondary index with ConsistentRead set to
* true
, you will receive a ValidationException.
*
*
* @param consistentRead
* Determines the read consistency model: If set to true
* , then the operation uses strongly consistent reads; otherwise,
* the operation uses eventually consistent reads.
*
* Strongly consistent reads are not supported on global secondary
* indexes. If you query a global secondary index with
* ConsistentRead set to true
, you will receive a
* ValidationException.
* @return Returns a reference to this object so that method calls can be
* chained together.
*/
public QueryRequest withConsistentRead(Boolean consistentRead) {
setConsistentRead(consistentRead);
return this;
}
/**
*
* Determines the read consistency model: If set to true
, then
* the operation uses strongly consistent reads; otherwise, the operation
* uses eventually consistent reads.
*
*
* Strongly consistent reads are not supported on global secondary indexes.
* If you query a global secondary index with ConsistentRead set to
* true
, you will receive a ValidationException.
*
*
* @return Determines the read consistency model: If set to
* true
, then the operation uses strongly consistent
* reads; otherwise, the operation uses eventually consistent
* reads.
*
* Strongly consistent reads are not supported on global secondary
* indexes. If you query a global secondary index with
* ConsistentRead set to true
, you will receive
* a ValidationException.
*/
public Boolean isConsistentRead() {
return this.consistentRead;
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications
* should use KeyConditionExpression instead. Do not combine legacy
* parameters and expression parameters in a single API call; otherwise,
* DynamoDB will return a ValidationException exception.
*
*
*
* The selection criteria for the query. For a query on a table, you can
* have conditions only on the table primary key attributes. You must
* provide the partition key name and value as an EQ
condition.
* You can optionally provide a second condition, referring to the sort key.
*
*
*
* If you don't provide a sort key condition, all of the items that match
* the partition key will be retrieved. If a FilterExpression or
* QueryFilter is present, it will be applied after the items are
* retrieved.
*
*
*
* For a query on an index, you can have conditions only on the index key
* attributes. You must provide the index partition key name and value as an
* EQ
condition. You can optionally provide a second condition,
* referring to the index sort key.
*
*
* Each KeyConditions element consists of an attribute name to
* compare, along with the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate against the
* supplied attribute. The number of values in the list depends on the
* ComparisonOperator being used.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than are based
* on ASCII character code values. For example, a
is greater
* than A
, and a
is greater than B
.
* For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
*
*
* For Binary, DynamoDB treats each byte of the binary data as unsigned when
* it compares binary values.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating attributes, for
* example, equals, greater than, less than, and so on.
*
*
* For KeyConditions, only the following comparison operators are
* supported:
*
*
* EQ | LE | LT | GE | GT | BEGINS_WITH | BETWEEN
*
*
* The following are descriptions of these comparison operators.
*
*
* -
*
* EQ
: Equal.
*
*
* AttributeValueList can contain only one AttributeValue of
* type String, Number, or Binary (not a set type). If an item contains an
* AttributeValue element of a different type than the one specified
* in the request, the value does not match. For example,
* {"S":"6"}
does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not equal {"NS":["6", "2", "1"]}
* .
*
*
* -
*
* LE
: Less than or equal.
*
*
* AttributeValueList can contain only one AttributeValue
* element of type String, Number, or Binary (not a set type). If an item
* contains an AttributeValue element of a different type than the
* one provided in the request, the value does not match. For example,
* {"S":"6"}
does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
.
*
*
* -
*
* LT
: Less than.
*
*
* AttributeValueList can contain only one AttributeValue of
* type String, Number, or Binary (not a set type). If an item contains an
* AttributeValue element of a different type than the one provided
* in the request, the value does not match. For example,
* {"S":"6"}
does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
.
*
*
* -
*
* GE
: Greater than or equal.
*
*
* AttributeValueList can contain only one AttributeValue
* element of type String, Number, or Binary (not a set type). If an item
* contains an AttributeValue element of a different type than the
* one provided in the request, the value does not match. For example,
* {"S":"6"}
does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
.
*
*
* -
*
* GT
: Greater than.
*
*
* AttributeValueList can contain only one AttributeValue
* element of type String, Number, or Binary (not a set type). If an item
* contains an AttributeValue element of a different type than the
* one provided in the request, the value does not match. For example,
* {"S":"6"}
does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
.
*
*
* -
*
* BEGINS_WITH
: Checks for a prefix.
*
*
* AttributeValueList can contain only one AttributeValue of
* type String or Binary (not a Number or a set type). The target attribute
* of the comparison must be of type String or Binary (not a Number or a set
* type).
*
*
* -
*
* BETWEEN
: Greater than or equal to the first value, and less
* than or equal to the second value.
*
*
* AttributeValueList must contain two AttributeValue elements
* of the same type, either String, Number, or Binary (not a set type). A
* target attribute matches if the target value is greater than, or equal
* to, the first element and less than, or equal to, the second element. If
* an item contains an AttributeValue element of a different type
* than the one provided in the request, the value does not match. For
* example, {"S":"6"}
does not compare to
* {"N":"6"}
. Also, {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
*
*
*
*
*
*
* For usage examples of AttributeValueList and
* ComparisonOperator, see Legacy Conditional Parameters in the Amazon DynamoDB Developer
* Guide.
*
*
* @return
* This is a legacy parameter, for backward compatibility. New
* applications should use KeyConditionExpression instead. Do
* not combine legacy parameters and expression parameters in a
* single API call; otherwise, DynamoDB will return a
* ValidationException exception.
*
*
*
* The selection criteria for the query. For a query on a table, you
* can have conditions only on the table primary key attributes. You
* must provide the partition key name and value as an
* EQ
condition. You can optionally provide a second
* condition, referring to the sort key.
*
*
*
* If you don't provide a sort key condition, all of the items that
* match the partition key will be retrieved. If a
* FilterExpression or QueryFilter is present, it will
* be applied after the items are retrieved.
*
*
*
* For a query on an index, you can have conditions only on the
* index key attributes. You must provide the index partition key
* name and value as an EQ
condition. You can
* optionally provide a second condition, referring to the index
* sort key.
*
*
* Each KeyConditions element consists of an attribute name
* to compare, along with the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate
* against the supplied attribute. The number of values in the list
* depends on the ComparisonOperator being used.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than
* are based on ASCII character code values. For example,
* a
is greater than A
, and a
* is greater than B
. For a list of code values, see http
* ://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
*
*
* For Binary, DynamoDB treats each byte of the binary data as
* unsigned when it compares binary values.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating
* attributes, for example, equals, greater than, less than, and so
* on.
*
*
* For KeyConditions, only the following comparison operators
* are supported:
*
*
* EQ | LE | LT | GE | GT | BEGINS_WITH | BETWEEN
*
*
* The following are descriptions of these comparison operators.
*
*
* -
*
* EQ
: Equal.
*
*
* AttributeValueList can contain only one
* AttributeValue of type String, Number, or Binary (not a
* set type). If an item contains an AttributeValue element
* of a different type than the one specified in the request, the
* value does not match. For example, {"S":"6"}
does
* not equal {"N":"6"}
. Also, {"N":"6"}
* does not equal {"NS":["6", "2", "1"]}
.
*
*
* -
*
* LE
: Less than or equal.
*
*
* AttributeValueList can contain only one
* AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue
* element of a different type than the one provided in the request,
* the value does not match. For example, {"S":"6"}
* does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
.
*
*
* -
*
* LT
: Less than.
*
*
* AttributeValueList can contain only one
* AttributeValue of type String, Number, or Binary (not a
* set type). If an item contains an AttributeValue element
* of a different type than the one provided in the request, the
* value does not match. For example, {"S":"6"}
does
* not equal {"N":"6"}
. Also, {"N":"6"}
* does not compare to {"NS":["6", "2", "1"]}
.
*
*
* -
*
* GE
: Greater than or equal.
*
*
* AttributeValueList can contain only one
* AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue
* element of a different type than the one provided in the request,
* the value does not match. For example, {"S":"6"}
* does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
.
*
*
* -
*
* GT
: Greater than.
*
*
* AttributeValueList can contain only one
* AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue
* element of a different type than the one provided in the request,
* the value does not match. For example, {"S":"6"}
* does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
.
*
*
* -
*
* BEGINS_WITH
: Checks for a prefix.
*
*
* AttributeValueList can contain only one
* AttributeValue of type String or Binary (not a Number or a
* set type). The target attribute of the comparison must be of type
* String or Binary (not a Number or a set type).
*
*
* -
*
* BETWEEN
: Greater than or equal to the first value,
* and less than or equal to the second value.
*
*
* AttributeValueList must contain two AttributeValue
* elements of the same type, either String, Number, or Binary (not
* a set type). A target attribute matches if the target value is
* greater than, or equal to, the first element and less than, or
* equal to, the second element. If an item contains an
* AttributeValue element of a different type than the one
* provided in the request, the value does not match. For example,
* {"S":"6"}
does not compare to {"N":"6"}
* . Also, {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
*
*
*
*
*
*
* For usage examples of AttributeValueList and
* ComparisonOperator, see Legacy Conditional Parameters in the Amazon DynamoDB
* Developer Guide.
*/
public java.util.Map getKeyConditions() {
return keyConditions;
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications
* should use KeyConditionExpression instead. Do not combine legacy
* parameters and expression parameters in a single API call; otherwise,
* DynamoDB will return a ValidationException exception.
*
*
*
* The selection criteria for the query. For a query on a table, you can
* have conditions only on the table primary key attributes. You must
* provide the partition key name and value as an EQ
condition.
* You can optionally provide a second condition, referring to the sort key.
*
*
*
* If you don't provide a sort key condition, all of the items that match
* the partition key will be retrieved. If a FilterExpression or
* QueryFilter is present, it will be applied after the items are
* retrieved.
*
*
*
* For a query on an index, you can have conditions only on the index key
* attributes. You must provide the index partition key name and value as an
* EQ
condition. You can optionally provide a second condition,
* referring to the index sort key.
*
*
* Each KeyConditions element consists of an attribute name to
* compare, along with the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate against the
* supplied attribute. The number of values in the list depends on the
* ComparisonOperator being used.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than are based
* on ASCII character code values. For example, a
is greater
* than A
, and a
is greater than B
.
* For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
*
*
* For Binary, DynamoDB treats each byte of the binary data as unsigned when
* it compares binary values.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating attributes, for
* example, equals, greater than, less than, and so on.
*
*
* For KeyConditions, only the following comparison operators are
* supported:
*
*
* EQ | LE | LT | GE | GT | BEGINS_WITH | BETWEEN
*
*
* The following are descriptions of these comparison operators.
*
*
* -
*
* EQ
: Equal.
*
*
* AttributeValueList can contain only one AttributeValue of
* type String, Number, or Binary (not a set type). If an item contains an
* AttributeValue element of a different type than the one specified
* in the request, the value does not match. For example,
* {"S":"6"}
does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not equal {"NS":["6", "2", "1"]}
* .
*
*
* -
*
* LE
: Less than or equal.
*
*
* AttributeValueList can contain only one AttributeValue
* element of type String, Number, or Binary (not a set type). If an item
* contains an AttributeValue element of a different type than the
* one provided in the request, the value does not match. For example,
* {"S":"6"}
does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
.
*
*
* -
*
* LT
: Less than.
*
*
* AttributeValueList can contain only one AttributeValue of
* type String, Number, or Binary (not a set type). If an item contains an
* AttributeValue element of a different type than the one provided
* in the request, the value does not match. For example,
* {"S":"6"}
does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
.
*
*
* -
*
* GE
: Greater than or equal.
*
*
* AttributeValueList can contain only one AttributeValue
* element of type String, Number, or Binary (not a set type). If an item
* contains an AttributeValue element of a different type than the
* one provided in the request, the value does not match. For example,
* {"S":"6"}
does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
.
*
*
* -
*
* GT
: Greater than.
*
*
* AttributeValueList can contain only one AttributeValue
* element of type String, Number, or Binary (not a set type). If an item
* contains an AttributeValue element of a different type than the
* one provided in the request, the value does not match. For example,
* {"S":"6"}
does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
.
*
*
* -
*
* BEGINS_WITH
: Checks for a prefix.
*
*
* AttributeValueList can contain only one AttributeValue of
* type String or Binary (not a Number or a set type). The target attribute
* of the comparison must be of type String or Binary (not a Number or a set
* type).
*
*
* -
*
* BETWEEN
: Greater than or equal to the first value, and less
* than or equal to the second value.
*
*
* AttributeValueList must contain two AttributeValue elements
* of the same type, either String, Number, or Binary (not a set type). A
* target attribute matches if the target value is greater than, or equal
* to, the first element and less than, or equal to, the second element. If
* an item contains an AttributeValue element of a different type
* than the one provided in the request, the value does not match. For
* example, {"S":"6"}
does not compare to
* {"N":"6"}
. Also, {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
*
*
*
*
*
*
* For usage examples of AttributeValueList and
* ComparisonOperator, see Legacy Conditional Parameters in the Amazon DynamoDB Developer
* Guide.
*
*
* @param keyConditions
*
* This is a legacy parameter, for backward compatibility. New
* applications should use KeyConditionExpression instead. Do
* not combine legacy parameters and expression parameters in a
* single API call; otherwise, DynamoDB will return a
* ValidationException exception.
*
*
*
* The selection criteria for the query. For a query on a table, you
* can have conditions only on the table primary key attributes. You
* must provide the partition key name and value as an
* EQ
condition. You can optionally provide a second
* condition, referring to the sort key.
*
*
*
* If you don't provide a sort key condition, all of the items that
* match the partition key will be retrieved. If a
* FilterExpression or QueryFilter is present, it will
* be applied after the items are retrieved.
*
*
*
* For a query on an index, you can have conditions only on the index
* key attributes. You must provide the index partition key name and
* value as an EQ
condition. You can optionally provide
* a second condition, referring to the index sort key.
*
*
* Each KeyConditions element consists of an attribute name to
* compare, along with the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate against
* the supplied attribute. The number of values in the list depends
* on the ComparisonOperator being used.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than
* are based on ASCII character code values. For example,
* a
is greater than A
, and a
* is greater than B
. For a list of code values, see http
* ://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
*
*
* For Binary, DynamoDB treats each byte of the binary data as
* unsigned when it compares binary values.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating
* attributes, for example, equals, greater than, less than, and so
* on.
*
*
* For KeyConditions, only the following comparison operators
* are supported:
*
*
* EQ | LE | LT | GE | GT | BEGINS_WITH | BETWEEN
*
*
* The following are descriptions of these comparison operators.
*
*
* -
*
* EQ
: Equal.
*
*
* AttributeValueList can contain only one
* AttributeValue of type String, Number, or Binary (not a set
* type). If an item contains an AttributeValue element of a
* different type than the one specified in the request, the value
* does not match. For example, {"S":"6"}
does not equal
* {"N":"6"}
. Also, {"N":"6"}
does not
* equal {"NS":["6", "2", "1"]}
.
*
*
* -
*
* LE
: Less than or equal.
*
*
* AttributeValueList can contain only one
* AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue
* element of a different type than the one provided in the request,
* the value does not match. For example, {"S":"6"}
does
* not equal {"N":"6"}
. Also, {"N":"6"}
* does not compare to {"NS":["6", "2", "1"]}
.
*
*
* -
*
* LT
: Less than.
*
*
* AttributeValueList can contain only one
* AttributeValue of type String, Number, or Binary (not a set
* type). If an item contains an AttributeValue element of a
* different type than the one provided in the request, the value
* does not match. For example, {"S":"6"}
does not equal
* {"N":"6"}
. Also, {"N":"6"}
does not
* compare to {"NS":["6", "2", "1"]}
.
*
*
* -
*
* GE
: Greater than or equal.
*
*
* AttributeValueList can contain only one
* AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue
* element of a different type than the one provided in the request,
* the value does not match. For example, {"S":"6"}
does
* not equal {"N":"6"}
. Also, {"N":"6"}
* does not compare to {"NS":["6", "2", "1"]}
.
*
*
* -
*
* GT
: Greater than.
*
*
* AttributeValueList can contain only one
* AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue
* element of a different type than the one provided in the request,
* the value does not match. For example, {"S":"6"}
does
* not equal {"N":"6"}
. Also, {"N":"6"}
* does not compare to {"NS":["6", "2", "1"]}
.
*
*
* -
*
* BEGINS_WITH
: Checks for a prefix.
*
*
* AttributeValueList can contain only one
* AttributeValue of type String or Binary (not a Number or a
* set type). The target attribute of the comparison must be of type
* String or Binary (not a Number or a set type).
*
*
* -
*
* BETWEEN
: Greater than or equal to the first value,
* and less than or equal to the second value.
*
*
* AttributeValueList must contain two AttributeValue
* elements of the same type, either String, Number, or Binary (not a
* set type). A target attribute matches if the target value is
* greater than, or equal to, the first element and less than, or
* equal to, the second element. If an item contains an
* AttributeValue element of a different type than the one
* provided in the request, the value does not match. For example,
* {"S":"6"}
does not compare to {"N":"6"}
.
* Also, {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
*
*
*
*
*
*
* For usage examples of AttributeValueList and
* ComparisonOperator, see Legacy Conditional Parameters in the Amazon DynamoDB
* Developer Guide.
*/
public void setKeyConditions(java.util.Map keyConditions) {
this.keyConditions = keyConditions;
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications
* should use KeyConditionExpression instead. Do not combine legacy
* parameters and expression parameters in a single API call; otherwise,
* DynamoDB will return a ValidationException exception.
*
*
*
* The selection criteria for the query. For a query on a table, you can
* have conditions only on the table primary key attributes. You must
* provide the partition key name and value as an EQ
condition.
* You can optionally provide a second condition, referring to the sort key.
*
*
*
* If you don't provide a sort key condition, all of the items that match
* the partition key will be retrieved. If a FilterExpression or
* QueryFilter is present, it will be applied after the items are
* retrieved.
*
*
*
* For a query on an index, you can have conditions only on the index key
* attributes. You must provide the index partition key name and value as an
* EQ
condition. You can optionally provide a second condition,
* referring to the index sort key.
*
*
* Each KeyConditions element consists of an attribute name to
* compare, along with the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate against the
* supplied attribute. The number of values in the list depends on the
* ComparisonOperator being used.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than are based
* on ASCII character code values. For example, a
is greater
* than A
, and a
is greater than B
.
* For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
*
*
* For Binary, DynamoDB treats each byte of the binary data as unsigned when
* it compares binary values.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating attributes, for
* example, equals, greater than, less than, and so on.
*
*
* For KeyConditions, only the following comparison operators are
* supported:
*
*
* EQ | LE | LT | GE | GT | BEGINS_WITH | BETWEEN
*
*
* The following are descriptions of these comparison operators.
*
*
* -
*
* EQ
: Equal.
*
*
* AttributeValueList can contain only one AttributeValue of
* type String, Number, or Binary (not a set type). If an item contains an
* AttributeValue element of a different type than the one specified
* in the request, the value does not match. For example,
* {"S":"6"}
does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not equal {"NS":["6", "2", "1"]}
* .
*
*
* -
*
* LE
: Less than or equal.
*
*
* AttributeValueList can contain only one AttributeValue
* element of type String, Number, or Binary (not a set type). If an item
* contains an AttributeValue element of a different type than the
* one provided in the request, the value does not match. For example,
* {"S":"6"}
does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
.
*
*
* -
*
* LT
: Less than.
*
*
* AttributeValueList can contain only one AttributeValue of
* type String, Number, or Binary (not a set type). If an item contains an
* AttributeValue element of a different type than the one provided
* in the request, the value does not match. For example,
* {"S":"6"}
does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
.
*
*
* -
*
* GE
: Greater than or equal.
*
*
* AttributeValueList can contain only one AttributeValue
* element of type String, Number, or Binary (not a set type). If an item
* contains an AttributeValue element of a different type than the
* one provided in the request, the value does not match. For example,
* {"S":"6"}
does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
.
*
*
* -
*
* GT
: Greater than.
*
*
* AttributeValueList can contain only one AttributeValue
* element of type String, Number, or Binary (not a set type). If an item
* contains an AttributeValue element of a different type than the
* one provided in the request, the value does not match. For example,
* {"S":"6"}
does not equal {"N":"6"}
. Also,
* {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
.
*
*
* -
*
* BEGINS_WITH
: Checks for a prefix.
*
*
* AttributeValueList can contain only one AttributeValue of
* type String or Binary (not a Number or a set type). The target attribute
* of the comparison must be of type String or Binary (not a Number or a set
* type).
*
*
* -
*
* BETWEEN
: Greater than or equal to the first value, and less
* than or equal to the second value.
*
*
* AttributeValueList must contain two AttributeValue elements
* of the same type, either String, Number, or Binary (not a set type). A
* target attribute matches if the target value is greater than, or equal
* to, the first element and less than, or equal to, the second element. If
* an item contains an AttributeValue element of a different type
* than the one provided in the request, the value does not match. For
* example, {"S":"6"}
does not compare to
* {"N":"6"}
. Also, {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
*
*
*
*
*
*
* For usage examples of AttributeValueList and
* ComparisonOperator, see Legacy Conditional Parameters in the Amazon DynamoDB Developer
* Guide.
*
*
* @param keyConditions
*
* This is a legacy parameter, for backward compatibility. New
* applications should use KeyConditionExpression instead. Do
* not combine legacy parameters and expression parameters in a
* single API call; otherwise, DynamoDB will return a
* ValidationException exception.
*
*
*
* The selection criteria for the query. For a query on a table, you
* can have conditions only on the table primary key attributes. You
* must provide the partition key name and value as an
* EQ
condition. You can optionally provide a second
* condition, referring to the sort key.
*
*
*
* If you don't provide a sort key condition, all of the items that
* match the partition key will be retrieved. If a
* FilterExpression or QueryFilter is present, it will
* be applied after the items are retrieved.
*
*
*
* For a query on an index, you can have conditions only on the index
* key attributes. You must provide the index partition key name and
* value as an EQ
condition. You can optionally provide
* a second condition, referring to the index sort key.
*
*
* Each KeyConditions element consists of an attribute name to
* compare, along with the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate against
* the supplied attribute. The number of values in the list depends
* on the ComparisonOperator being used.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than
* are based on ASCII character code values. For example,
* a
is greater than A
, and a
* is greater than B
. For a list of code values, see http
* ://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
*
*
* For Binary, DynamoDB treats each byte of the binary data as
* unsigned when it compares binary values.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating
* attributes, for example, equals, greater than, less than, and so
* on.
*
*
* For KeyConditions, only the following comparison operators
* are supported:
*
*
* EQ | LE | LT | GE | GT | BEGINS_WITH | BETWEEN
*
*
* The following are descriptions of these comparison operators.
*
*
* -
*
* EQ
: Equal.
*
*
* AttributeValueList can contain only one
* AttributeValue of type String, Number, or Binary (not a set
* type). If an item contains an AttributeValue element of a
* different type than the one specified in the request, the value
* does not match. For example, {"S":"6"}
does not equal
* {"N":"6"}
. Also, {"N":"6"}
does not
* equal {"NS":["6", "2", "1"]}
.
*
*
* -
*
* LE
: Less than or equal.
*
*
* AttributeValueList can contain only one
* AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue
* element of a different type than the one provided in the request,
* the value does not match. For example, {"S":"6"}
does
* not equal {"N":"6"}
. Also, {"N":"6"}
* does not compare to {"NS":["6", "2", "1"]}
.
*
*
* -
*
* LT
: Less than.
*
*
* AttributeValueList can contain only one
* AttributeValue of type String, Number, or Binary (not a set
* type). If an item contains an AttributeValue element of a
* different type than the one provided in the request, the value
* does not match. For example, {"S":"6"}
does not equal
* {"N":"6"}
. Also, {"N":"6"}
does not
* compare to {"NS":["6", "2", "1"]}
.
*
*
* -
*
* GE
: Greater than or equal.
*
*
* AttributeValueList can contain only one
* AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue
* element of a different type than the one provided in the request,
* the value does not match. For example, {"S":"6"}
does
* not equal {"N":"6"}
. Also, {"N":"6"}
* does not compare to {"NS":["6", "2", "1"]}
.
*
*
* -
*
* GT
: Greater than.
*
*
* AttributeValueList can contain only one
* AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue
* element of a different type than the one provided in the request,
* the value does not match. For example, {"S":"6"}
does
* not equal {"N":"6"}
. Also, {"N":"6"}
* does not compare to {"NS":["6", "2", "1"]}
.
*
*
* -
*
* BEGINS_WITH
: Checks for a prefix.
*
*
* AttributeValueList can contain only one
* AttributeValue of type String or Binary (not a Number or a
* set type). The target attribute of the comparison must be of type
* String or Binary (not a Number or a set type).
*
*
* -
*
* BETWEEN
: Greater than or equal to the first value,
* and less than or equal to the second value.
*
*
* AttributeValueList must contain two AttributeValue
* elements of the same type, either String, Number, or Binary (not a
* set type). A target attribute matches if the target value is
* greater than, or equal to, the first element and less than, or
* equal to, the second element. If an item contains an
* AttributeValue element of a different type than the one
* provided in the request, the value does not match. For example,
* {"S":"6"}
does not compare to {"N":"6"}
.
* Also, {"N":"6"}
does not compare to
* {"NS":["6", "2", "1"]}
*
*
*
*
*
*
* For usage examples of AttributeValueList and
* ComparisonOperator, see Legacy Conditional Parameters in the Amazon DynamoDB
* Developer Guide.
* @return Returns a reference to this object so that method calls can be
* chained together.
*/
public QueryRequest withKeyConditions(
java.util.Map keyConditions) {
setKeyConditions(keyConditions);
return this;
}
public QueryRequest addKeyConditionsEntry(String key, Condition value) {
if (null == this.keyConditions) {
this.keyConditions = new java.util.HashMap();
}
if (this.keyConditions.containsKey(key))
throw new IllegalArgumentException("Duplicated keys ("
+ key.toString() + ") are provided.");
this.keyConditions.put(key, value);
return this;
}
/**
* Removes all the entries added into KeyConditions. <p> Returns a
* reference to this object so that method calls can be chained together.
*/
public QueryRequest clearKeyConditionsEntries() {
this.keyConditions = null;
return this;
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications
* should use FilterExpression instead. Do not combine legacy
* parameters and expression parameters in a single API call; otherwise,
* DynamoDB will return a ValidationException exception.
*
*
*
* A condition that evaluates the query results after the items are read and
* returns only the desired values.
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* A QueryFilter is applied after the items have already been read;
* the process of filtering does not consume any additional read capacity
* units.
*
*
*
* If you provide more than one condition in the QueryFilter map,
* then by default all of the conditions must evaluate to true. In other
* words, the conditions are ANDed together. (You can use the
* ConditionalOperator parameter to OR the conditions instead. If you
* do this, then at least one of the conditions must evaluate to true,
* rather than all of them.)
*
*
* Note that QueryFilter does not allow key attributes. You cannot
* define a filter condition on a partition key or a sort key.
*
*
* Each QueryFilter element consists of an attribute name to compare,
* along with the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate against the
* supplied attribute. The number of values in the list depends on the
* operator specified in ComparisonOperator.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than are based
* on ASCII character code values. For example, a
is greater
* than A
, and a
is greater than B
.
* For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
*
*
* For type Binary, DynamoDB treats each byte of the binary data as unsigned
* when it compares binary values.
*
*
* For information on specifying data types in JSON, see JSON Data Format in the Amazon DynamoDB Developer Guide.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating attributes. For
* example, equals, greater than, less than, etc.
*
*
* The following comparison operators are available:
*
*
* EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN
*
*
* For complete descriptions of all comparison operators, see the Condition data type.
*
*
*
*
* @return
* This is a legacy parameter, for backward compatibility. New
* applications should use FilterExpression instead. Do not
* combine legacy parameters and expression parameters in a single
* API call; otherwise, DynamoDB will return a
* ValidationException exception.
*
*
*
* A condition that evaluates the query results after the items are
* read and returns only the desired values.
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* A QueryFilter is applied after the items have already been
* read; the process of filtering does not consume any additional
* read capacity units.
*
*
*
* If you provide more than one condition in the QueryFilter
* map, then by default all of the conditions must evaluate to true.
* In other words, the conditions are ANDed together. (You can use
* the ConditionalOperator parameter to OR the conditions
* instead. If you do this, then at least one of the conditions must
* evaluate to true, rather than all of them.)
*
*
* Note that QueryFilter does not allow key attributes. You
* cannot define a filter condition on a partition key or a sort
* key.
*
*
* Each QueryFilter element consists of an attribute name to
* compare, along with the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate
* against the supplied attribute. The number of values in the list
* depends on the operator specified in ComparisonOperator.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than
* are based on ASCII character code values. For example,
* a
is greater than A
, and a
* is greater than B
. For a list of code values, see http
* ://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
*
*
* For type Binary, DynamoDB treats each byte of the binary data as
* unsigned when it compares binary values.
*
*
* For information on specifying data types in JSON, see JSON Data Format in the Amazon DynamoDB Developer
* Guide.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating
* attributes. For example, equals, greater than, less than, etc.
*
*
* The following comparison operators are available:
*
*
* EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN
*
*
* For complete descriptions of all comparison operators, see the Condition data type.
*
*
*/
public java.util.Map getQueryFilter() {
return queryFilter;
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications
* should use FilterExpression instead. Do not combine legacy
* parameters and expression parameters in a single API call; otherwise,
* DynamoDB will return a ValidationException exception.
*
*
*
* A condition that evaluates the query results after the items are read and
* returns only the desired values.
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* A QueryFilter is applied after the items have already been read;
* the process of filtering does not consume any additional read capacity
* units.
*
*
*
* If you provide more than one condition in the QueryFilter map,
* then by default all of the conditions must evaluate to true. In other
* words, the conditions are ANDed together. (You can use the
* ConditionalOperator parameter to OR the conditions instead. If you
* do this, then at least one of the conditions must evaluate to true,
* rather than all of them.)
*
*
* Note that QueryFilter does not allow key attributes. You cannot
* define a filter condition on a partition key or a sort key.
*
*
* Each QueryFilter element consists of an attribute name to compare,
* along with the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate against the
* supplied attribute. The number of values in the list depends on the
* operator specified in ComparisonOperator.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than are based
* on ASCII character code values. For example, a
is greater
* than A
, and a
is greater than B
.
* For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
*
*
* For type Binary, DynamoDB treats each byte of the binary data as unsigned
* when it compares binary values.
*
*
* For information on specifying data types in JSON, see JSON Data Format in the Amazon DynamoDB Developer Guide.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating attributes. For
* example, equals, greater than, less than, etc.
*
*
* The following comparison operators are available:
*
*
* EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN
*
*
* For complete descriptions of all comparison operators, see the Condition data type.
*
*
*
*
* @param queryFilter
*
* This is a legacy parameter, for backward compatibility. New
* applications should use FilterExpression instead. Do not
* combine legacy parameters and expression parameters in a single
* API call; otherwise, DynamoDB will return a
* ValidationException exception.
*
*
*
* A condition that evaluates the query results after the items are
* read and returns only the desired values.
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* A QueryFilter is applied after the items have already been
* read; the process of filtering does not consume any additional
* read capacity units.
*
*
*
* If you provide more than one condition in the QueryFilter
* map, then by default all of the conditions must evaluate to true.
* In other words, the conditions are ANDed together. (You can use
* the ConditionalOperator parameter to OR the conditions
* instead. If you do this, then at least one of the conditions must
* evaluate to true, rather than all of them.)
*
*
* Note that QueryFilter does not allow key attributes. You
* cannot define a filter condition on a partition key or a sort key.
*
*
* Each QueryFilter element consists of an attribute name to
* compare, along with the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate against
* the supplied attribute. The number of values in the list depends
* on the operator specified in ComparisonOperator.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than
* are based on ASCII character code values. For example,
* a
is greater than A
, and a
* is greater than B
. For a list of code values, see http
* ://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
*
*
* For type Binary, DynamoDB treats each byte of the binary data as
* unsigned when it compares binary values.
*
*
* For information on specifying data types in JSON, see JSON Data Format in the Amazon DynamoDB Developer
* Guide.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating
* attributes. For example, equals, greater than, less than, etc.
*
*
* The following comparison operators are available:
*
*
* EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN
*
*
* For complete descriptions of all comparison operators, see the Condition data type.
*
*
*/
public void setQueryFilter(java.util.Map queryFilter) {
this.queryFilter = queryFilter;
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications
* should use FilterExpression instead. Do not combine legacy
* parameters and expression parameters in a single API call; otherwise,
* DynamoDB will return a ValidationException exception.
*
*
*
* A condition that evaluates the query results after the items are read and
* returns only the desired values.
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* A QueryFilter is applied after the items have already been read;
* the process of filtering does not consume any additional read capacity
* units.
*
*
*
* If you provide more than one condition in the QueryFilter map,
* then by default all of the conditions must evaluate to true. In other
* words, the conditions are ANDed together. (You can use the
* ConditionalOperator parameter to OR the conditions instead. If you
* do this, then at least one of the conditions must evaluate to true,
* rather than all of them.)
*
*
* Note that QueryFilter does not allow key attributes. You cannot
* define a filter condition on a partition key or a sort key.
*
*
* Each QueryFilter element consists of an attribute name to compare,
* along with the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate against the
* supplied attribute. The number of values in the list depends on the
* operator specified in ComparisonOperator.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than are based
* on ASCII character code values. For example, a
is greater
* than A
, and a
is greater than B
.
* For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
*
*
* For type Binary, DynamoDB treats each byte of the binary data as unsigned
* when it compares binary values.
*
*
* For information on specifying data types in JSON, see JSON Data Format in the Amazon DynamoDB Developer Guide.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating attributes. For
* example, equals, greater than, less than, etc.
*
*
* The following comparison operators are available:
*
*
* EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN
*
*
* For complete descriptions of all comparison operators, see the Condition data type.
*
*
*
*
* @param queryFilter
*
* This is a legacy parameter, for backward compatibility. New
* applications should use FilterExpression instead. Do not
* combine legacy parameters and expression parameters in a single
* API call; otherwise, DynamoDB will return a
* ValidationException exception.
*
*
*
* A condition that evaluates the query results after the items are
* read and returns only the desired values.
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* A QueryFilter is applied after the items have already been
* read; the process of filtering does not consume any additional
* read capacity units.
*
*
*
* If you provide more than one condition in the QueryFilter
* map, then by default all of the conditions must evaluate to true.
* In other words, the conditions are ANDed together. (You can use
* the ConditionalOperator parameter to OR the conditions
* instead. If you do this, then at least one of the conditions must
* evaluate to true, rather than all of them.)
*
*
* Note that QueryFilter does not allow key attributes. You
* cannot define a filter condition on a partition key or a sort key.
*
*
* Each QueryFilter element consists of an attribute name to
* compare, along with the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate against
* the supplied attribute. The number of values in the list depends
* on the operator specified in ComparisonOperator.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than
* are based on ASCII character code values. For example,
* a
is greater than A
, and a
* is greater than B
. For a list of code values, see http
* ://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
*
*
* For type Binary, DynamoDB treats each byte of the binary data as
* unsigned when it compares binary values.
*
*
* For information on specifying data types in JSON, see JSON Data Format in the Amazon DynamoDB Developer
* Guide.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating
* attributes. For example, equals, greater than, less than, etc.
*
*
* The following comparison operators are available:
*
*
* EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN
*
*
* For complete descriptions of all comparison operators, see the Condition data type.
*
*
* @return Returns a reference to this object so that method calls can be
* chained together.
*/
public QueryRequest withQueryFilter(
java.util.Map queryFilter) {
setQueryFilter(queryFilter);
return this;
}
public QueryRequest addQueryFilterEntry(String key, Condition value) {
if (null == this.queryFilter) {
this.queryFilter = new java.util.HashMap();
}
if (this.queryFilter.containsKey(key))
throw new IllegalArgumentException("Duplicated keys ("
+ key.toString() + ") are provided.");
this.queryFilter.put(key, value);
return this;
}
/**
* Removes all the entries added into QueryFilter. <p> Returns a
* reference to this object so that method calls can be chained together.
*/
public QueryRequest clearQueryFilterEntries() {
this.queryFilter = null;
return this;
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications
* should use FilterExpression instead. Do not combine legacy
* parameters and expression parameters in a single API call; otherwise,
* DynamoDB will return a ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in a QueryFilter
* map:
*
*
* -
*
* AND
- If all of the conditions evaluate to true, then the
* entire map evaluates to true.
*
*
* -
*
* OR
- If at least one of the conditions evaluate to true,
* then the entire map evaluates to true.
*
*
*
*
* If you omit ConditionalOperator, then AND
is the
* default.
*
*
* The operation will succeed only if the entire map evaluates to true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* @param conditionalOperator
*
* This is a legacy parameter, for backward compatibility. New
* applications should use FilterExpression instead. Do not
* combine legacy parameters and expression parameters in a single
* API call; otherwise, DynamoDB will return a
* ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in a
* QueryFilter map:
*
*
* -
*
* AND
- If all of the conditions evaluate to true, then
* the entire map evaluates to true.
*
*
* -
*
* OR
- If at least one of the conditions evaluate to
* true, then the entire map evaluates to true.
*
*
*
*
* If you omit ConditionalOperator, then AND
is
* the default.
*
*
* The operation will succeed only if the entire map evaluates to
* true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
* @see ConditionalOperator
*/
public void setConditionalOperator(String conditionalOperator) {
this.conditionalOperator = conditionalOperator;
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications
* should use FilterExpression instead. Do not combine legacy
* parameters and expression parameters in a single API call; otherwise,
* DynamoDB will return a ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in a QueryFilter
* map:
*
*
* -
*
* AND
- If all of the conditions evaluate to true, then the
* entire map evaluates to true.
*
*
* -
*
* OR
- If at least one of the conditions evaluate to true,
* then the entire map evaluates to true.
*
*
*
*
* If you omit ConditionalOperator, then AND
is the
* default.
*
*
* The operation will succeed only if the entire map evaluates to true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* @return
* This is a legacy parameter, for backward compatibility. New
* applications should use FilterExpression instead. Do not
* combine legacy parameters and expression parameters in a single
* API call; otherwise, DynamoDB will return a
* ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in a
* QueryFilter map:
*
*
* -
*
* AND
- If all of the conditions evaluate to true,
* then the entire map evaluates to true.
*
*
* -
*
* OR
- If at least one of the conditions evaluate to
* true, then the entire map evaluates to true.
*
*
*
*
* If you omit ConditionalOperator, then AND
is
* the default.
*
*
* The operation will succeed only if the entire map evaluates to
* true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
* @see ConditionalOperator
*/
public String getConditionalOperator() {
return this.conditionalOperator;
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications
* should use FilterExpression instead. Do not combine legacy
* parameters and expression parameters in a single API call; otherwise,
* DynamoDB will return a ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in a QueryFilter
* map:
*
*
* -
*
* AND
- If all of the conditions evaluate to true, then the
* entire map evaluates to true.
*
*
* -
*
* OR
- If at least one of the conditions evaluate to true,
* then the entire map evaluates to true.
*
*
*
*
* If you omit ConditionalOperator, then AND
is the
* default.
*
*
* The operation will succeed only if the entire map evaluates to true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* @param conditionalOperator
*
* This is a legacy parameter, for backward compatibility. New
* applications should use FilterExpression instead. Do not
* combine legacy parameters and expression parameters in a single
* API call; otherwise, DynamoDB will return a
* ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in a
* QueryFilter map:
*
*
* -
*
* AND
- If all of the conditions evaluate to true, then
* the entire map evaluates to true.
*
*
* -
*
* OR
- If at least one of the conditions evaluate to
* true, then the entire map evaluates to true.
*
*
*
*
* If you omit ConditionalOperator, then AND
is
* the default.
*
*
* The operation will succeed only if the entire map evaluates to
* true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
* @return Returns a reference to this object so that method calls can be
* chained together.
* @see ConditionalOperator
*/
public QueryRequest withConditionalOperator(String conditionalOperator) {
setConditionalOperator(conditionalOperator);
return this;
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications
* should use FilterExpression instead. Do not combine legacy
* parameters and expression parameters in a single API call; otherwise,
* DynamoDB will return a ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in a QueryFilter
* map:
*
*
* -
*
* AND
- If all of the conditions evaluate to true, then the
* entire map evaluates to true.
*
*
* -
*
* OR
- If at least one of the conditions evaluate to true,
* then the entire map evaluates to true.
*
*
*
*
* If you omit ConditionalOperator, then AND
is the
* default.
*
*
* The operation will succeed only if the entire map evaluates to true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* @param conditionalOperator
*
* This is a legacy parameter, for backward compatibility. New
* applications should use FilterExpression instead. Do not
* combine legacy parameters and expression parameters in a single
* API call; otherwise, DynamoDB will return a
* ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in a
* QueryFilter map:
*
*
* -
*
* AND
- If all of the conditions evaluate to true, then
* the entire map evaluates to true.
*
*
* -
*
* OR
- If at least one of the conditions evaluate to
* true, then the entire map evaluates to true.
*
*
*
*
* If you omit ConditionalOperator, then AND
is
* the default.
*
*
* The operation will succeed only if the entire map evaluates to
* true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
* @see ConditionalOperator
*/
public void setConditionalOperator(ConditionalOperator conditionalOperator) {
this.conditionalOperator = conditionalOperator.toString();
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications
* should use FilterExpression instead. Do not combine legacy
* parameters and expression parameters in a single API call; otherwise,
* DynamoDB will return a ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in a QueryFilter
* map:
*
*
* -
*
* AND
- If all of the conditions evaluate to true, then the
* entire map evaluates to true.
*
*
* -
*
* OR
- If at least one of the conditions evaluate to true,
* then the entire map evaluates to true.
*
*
*
*
* If you omit ConditionalOperator, then AND
is the
* default.
*
*
* The operation will succeed only if the entire map evaluates to true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* @param conditionalOperator
*
* This is a legacy parameter, for backward compatibility. New
* applications should use FilterExpression instead. Do not
* combine legacy parameters and expression parameters in a single
* API call; otherwise, DynamoDB will return a
* ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in a
* QueryFilter map:
*
*
* -
*
* AND
- If all of the conditions evaluate to true, then
* the entire map evaluates to true.
*
*
* -
*
* OR
- If at least one of the conditions evaluate to
* true, then the entire map evaluates to true.
*
*
*
*
* If you omit ConditionalOperator, then AND
is
* the default.
*
*
* The operation will succeed only if the entire map evaluates to
* true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
* @return Returns a reference to this object so that method calls can be
* chained together.
* @see ConditionalOperator
*/
public QueryRequest withConditionalOperator(
ConditionalOperator conditionalOperator) {
setConditionalOperator(conditionalOperator);
return this;
}
/**
*
* Specifies the order for index traversal: If true
(default),
* the traversal is performed in ascending order; if false
, the
* traversal is performed in descending order.
*
*
* Items with the same partition key value are stored in sorted order by
* sort key. If the sort key data type is Number, the results are stored in
* numeric order. For type String, the results are stored in order of ASCII
* character code values. For type Binary, DynamoDB treats each byte of the
* binary data as unsigned.
*
*
* If ScanIndexForward is true
, DynamoDB returns the
* results in the order in which they are stored (by sort key value). This
* is the default behavior. If ScanIndexForward is false
* , DynamoDB reads the results in reverse order by sort key value, and then
* returns the results to the client.
*
*
* @param scanIndexForward
* Specifies the order for index traversal: If true
* (default), the traversal is performed in ascending order; if
* false
, the traversal is performed in descending
* order.
*
* Items with the same partition key value are stored in sorted order
* by sort key. If the sort key data type is Number, the results are
* stored in numeric order. For type String, the results are stored
* in order of ASCII character code values. For type Binary, DynamoDB
* treats each byte of the binary data as unsigned.
*
*
* If ScanIndexForward is true
, DynamoDB returns
* the results in the order in which they are stored (by sort key
* value). This is the default behavior. If ScanIndexForward
* is false
, DynamoDB reads the results in reverse order
* by sort key value, and then returns the results to the client.
*/
public void setScanIndexForward(Boolean scanIndexForward) {
this.scanIndexForward = scanIndexForward;
}
/**
*
* Specifies the order for index traversal: If true
(default),
* the traversal is performed in ascending order; if false
, the
* traversal is performed in descending order.
*
*
* Items with the same partition key value are stored in sorted order by
* sort key. If the sort key data type is Number, the results are stored in
* numeric order. For type String, the results are stored in order of ASCII
* character code values. For type Binary, DynamoDB treats each byte of the
* binary data as unsigned.
*
*
* If ScanIndexForward is true
, DynamoDB returns the
* results in the order in which they are stored (by sort key value). This
* is the default behavior. If ScanIndexForward is false
* , DynamoDB reads the results in reverse order by sort key value, and then
* returns the results to the client.
*
*
* @return Specifies the order for index traversal: If true
* (default), the traversal is performed in ascending order; if
* false
, the traversal is performed in descending
* order.
*
* Items with the same partition key value are stored in sorted
* order by sort key. If the sort key data type is Number, the
* results are stored in numeric order. For type String, the results
* are stored in order of ASCII character code values. For type
* Binary, DynamoDB treats each byte of the binary data as unsigned.
*
*
* If ScanIndexForward is true
, DynamoDB returns
* the results in the order in which they are stored (by sort key
* value). This is the default behavior. If ScanIndexForward
* is false
, DynamoDB reads the results in reverse
* order by sort key value, and then returns the results to the
* client.
*/
public Boolean getScanIndexForward() {
return this.scanIndexForward;
}
/**
*
* Specifies the order for index traversal: If true
(default),
* the traversal is performed in ascending order; if false
, the
* traversal is performed in descending order.
*
*
* Items with the same partition key value are stored in sorted order by
* sort key. If the sort key data type is Number, the results are stored in
* numeric order. For type String, the results are stored in order of ASCII
* character code values. For type Binary, DynamoDB treats each byte of the
* binary data as unsigned.
*
*
* If ScanIndexForward is true
, DynamoDB returns the
* results in the order in which they are stored (by sort key value). This
* is the default behavior. If ScanIndexForward is false
* , DynamoDB reads the results in reverse order by sort key value, and then
* returns the results to the client.
*
*
* @param scanIndexForward
* Specifies the order for index traversal: If true
* (default), the traversal is performed in ascending order; if
* false
, the traversal is performed in descending
* order.
*
* Items with the same partition key value are stored in sorted order
* by sort key. If the sort key data type is Number, the results are
* stored in numeric order. For type String, the results are stored
* in order of ASCII character code values. For type Binary, DynamoDB
* treats each byte of the binary data as unsigned.
*
*
* If ScanIndexForward is true
, DynamoDB returns
* the results in the order in which they are stored (by sort key
* value). This is the default behavior. If ScanIndexForward
* is false
, DynamoDB reads the results in reverse order
* by sort key value, and then returns the results to the client.
* @return Returns a reference to this object so that method calls can be
* chained together.
*/
public QueryRequest withScanIndexForward(Boolean scanIndexForward) {
setScanIndexForward(scanIndexForward);
return this;
}
/**
*
* Specifies the order for index traversal: If true
(default),
* the traversal is performed in ascending order; if false
, the
* traversal is performed in descending order.
*
*
* Items with the same partition key value are stored in sorted order by
* sort key. If the sort key data type is Number, the results are stored in
* numeric order. For type String, the results are stored in order of ASCII
* character code values. For type Binary, DynamoDB treats each byte of the
* binary data as unsigned.
*
*
* If ScanIndexForward is true
, DynamoDB returns the
* results in the order in which they are stored (by sort key value). This
* is the default behavior. If ScanIndexForward is false
* , DynamoDB reads the results in reverse order by sort key value, and then
* returns the results to the client.
*
*
* @return Specifies the order for index traversal: If true
* (default), the traversal is performed in ascending order; if
* false
, the traversal is performed in descending
* order.
*
* Items with the same partition key value are stored in sorted
* order by sort key. If the sort key data type is Number, the
* results are stored in numeric order. For type String, the results
* are stored in order of ASCII character code values. For type
* Binary, DynamoDB treats each byte of the binary data as unsigned.
*
*
* If ScanIndexForward is true
, DynamoDB returns
* the results in the order in which they are stored (by sort key
* value). This is the default behavior. If ScanIndexForward
* is false
, DynamoDB reads the results in reverse
* order by sort key value, and then returns the results to the
* client.
*/
public Boolean isScanIndexForward() {
return this.scanIndexForward;
}
/**
*
* The primary key of the first item that this operation will evaluate. Use
* the value that was returned for LastEvaluatedKey in the previous
* operation.
*
*
* The data type for ExclusiveStartKey must be String, Number or
* Binary. No set data types are allowed.
*
*
* @return The primary key of the first item that this operation will
* evaluate. Use the value that was returned for
* LastEvaluatedKey in the previous operation.
*
* The data type for ExclusiveStartKey must be String, Number
* or Binary. No set data types are allowed.
*/
public java.util.Map getExclusiveStartKey() {
return exclusiveStartKey;
}
/**
*
* The primary key of the first item that this operation will evaluate. Use
* the value that was returned for LastEvaluatedKey in the previous
* operation.
*
*
* The data type for ExclusiveStartKey must be String, Number or
* Binary. No set data types are allowed.
*
*
* @param exclusiveStartKey
* The primary key of the first item that this operation will
* evaluate. Use the value that was returned for
* LastEvaluatedKey in the previous operation.
*
* The data type for ExclusiveStartKey must be String, Number
* or Binary. No set data types are allowed.
*/
public void setExclusiveStartKey(
java.util.Map exclusiveStartKey) {
this.exclusiveStartKey = exclusiveStartKey;
}
/**
*
* The primary key of the first item that this operation will evaluate. Use
* the value that was returned for LastEvaluatedKey in the previous
* operation.
*
*
* The data type for ExclusiveStartKey must be String, Number or
* Binary. No set data types are allowed.
*
*
* @param exclusiveStartKey
* The primary key of the first item that this operation will
* evaluate. Use the value that was returned for
* LastEvaluatedKey in the previous operation.
*
* The data type for ExclusiveStartKey must be String, Number
* or Binary. No set data types are allowed.
* @return Returns a reference to this object so that method calls can be
* chained together.
*/
public QueryRequest withExclusiveStartKey(
java.util.Map exclusiveStartKey) {
setExclusiveStartKey(exclusiveStartKey);
return this;
}
public QueryRequest addExclusiveStartKeyEntry(String key,
AttributeValue value) {
if (null == this.exclusiveStartKey) {
this.exclusiveStartKey = new java.util.HashMap();
}
if (this.exclusiveStartKey.containsKey(key))
throw new IllegalArgumentException("Duplicated keys ("
+ key.toString() + ") are provided.");
this.exclusiveStartKey.put(key, value);
return this;
}
/**
* Removes all the entries added into ExclusiveStartKey. <p> Returns a
* reference to this object so that method calls can be chained together.
*/
public QueryRequest clearExclusiveStartKeyEntries() {
this.exclusiveStartKey = null;
return this;
}
/**
* @param returnConsumedCapacity
* @see ReturnConsumedCapacity
*/
public void setReturnConsumedCapacity(String returnConsumedCapacity) {
this.returnConsumedCapacity = returnConsumedCapacity;
}
/**
* @return
* @see ReturnConsumedCapacity
*/
public String getReturnConsumedCapacity() {
return this.returnConsumedCapacity;
}
/**
* @param returnConsumedCapacity
* @return Returns a reference to this object so that method calls can be
* chained together.
* @see ReturnConsumedCapacity
*/
public QueryRequest withReturnConsumedCapacity(String returnConsumedCapacity) {
setReturnConsumedCapacity(returnConsumedCapacity);
return this;
}
/**
* @param returnConsumedCapacity
* @see ReturnConsumedCapacity
*/
public void setReturnConsumedCapacity(
ReturnConsumedCapacity returnConsumedCapacity) {
this.returnConsumedCapacity = returnConsumedCapacity.toString();
}
/**
* @param returnConsumedCapacity
* @return Returns a reference to this object so that method calls can be
* chained together.
* @see ReturnConsumedCapacity
*/
public QueryRequest withReturnConsumedCapacity(
ReturnConsumedCapacity returnConsumedCapacity) {
setReturnConsumedCapacity(returnConsumedCapacity);
return this;
}
/**
*
* A string that identifies one or more attributes to retrieve from the
* table. These attributes can include scalars, sets, or elements of a JSON
* document. The attributes in the expression must be separated by commas.
*
*
* If no attribute names are specified, then all attributes will be
* returned. If any of the requested attributes are not found, they will not
* appear in the result.
*
*
* For more information, see Accessing Item Attributes in the Amazon DynamoDB Developer
* Guide.
*
*
*
* ProjectionExpression replaces the legacy AttributesToGet
* parameter.
*
*
*
* @param projectionExpression
* A string that identifies one or more attributes to retrieve from
* the table. These attributes can include scalars, sets, or elements
* of a JSON document. The attributes in the expression must be
* separated by commas.
*
* If no attribute names are specified, then all attributes will be
* returned. If any of the requested attributes are not found, they
* will not appear in the result.
*
*
* For more information, see Accessing Item Attributes in the Amazon DynamoDB Developer
* Guide.
*
*
*
* ProjectionExpression replaces the legacy
* AttributesToGet parameter.
*
*/
public void setProjectionExpression(String projectionExpression) {
this.projectionExpression = projectionExpression;
}
/**
*
* A string that identifies one or more attributes to retrieve from the
* table. These attributes can include scalars, sets, or elements of a JSON
* document. The attributes in the expression must be separated by commas.
*
*
* If no attribute names are specified, then all attributes will be
* returned. If any of the requested attributes are not found, they will not
* appear in the result.
*
*
* For more information, see Accessing Item Attributes in the Amazon DynamoDB Developer
* Guide.
*
*
*
* ProjectionExpression replaces the legacy AttributesToGet
* parameter.
*
*
*
* @return A string that identifies one or more attributes to retrieve from
* the table. These attributes can include scalars, sets, or
* elements of a JSON document. The attributes in the expression
* must be separated by commas.
*
* If no attribute names are specified, then all attributes will be
* returned. If any of the requested attributes are not found, they
* will not appear in the result.
*
*
* For more information, see Accessing Item Attributes in the Amazon DynamoDB
* Developer Guide.
*
*
*
* ProjectionExpression replaces the legacy
* AttributesToGet parameter.
*
*/
public String getProjectionExpression() {
return this.projectionExpression;
}
/**
*
* A string that identifies one or more attributes to retrieve from the
* table. These attributes can include scalars, sets, or elements of a JSON
* document. The attributes in the expression must be separated by commas.
*
*
* If no attribute names are specified, then all attributes will be
* returned. If any of the requested attributes are not found, they will not
* appear in the result.
*
*
* For more information, see Accessing Item Attributes in the Amazon DynamoDB Developer
* Guide.
*
*
*
* ProjectionExpression replaces the legacy AttributesToGet
* parameter.
*
*
*
* @param projectionExpression
* A string that identifies one or more attributes to retrieve from
* the table. These attributes can include scalars, sets, or elements
* of a JSON document. The attributes in the expression must be
* separated by commas.
*
* If no attribute names are specified, then all attributes will be
* returned. If any of the requested attributes are not found, they
* will not appear in the result.
*
*
* For more information, see Accessing Item Attributes in the Amazon DynamoDB Developer
* Guide.
*
*
*
* ProjectionExpression replaces the legacy
* AttributesToGet parameter.
*
* @return Returns a reference to this object so that method calls can be
* chained together.
*/
public QueryRequest withProjectionExpression(String projectionExpression) {
setProjectionExpression(projectionExpression);
return this;
}
/**
*
* A string that contains conditions that DynamoDB applies after the
* Query operation, but before the data is returned to you. Items
* that do not satisfy the FilterExpression criteria are not
* returned.
*
*
*
* A FilterExpression is applied after the items have already been
* read; the process of filtering does not consume any additional read
* capacity units.
*
*
*
* For more information, see Filter Expressions in the Amazon DynamoDB Developer Guide.
*
*
*
* FilterExpression replaces the legacy QueryFilter and
* ConditionalOperator parameters.
*
*
*
* @param filterExpression
* A string that contains conditions that DynamoDB applies after the
* Query operation, but before the data is returned to you.
* Items that do not satisfy the FilterExpression criteria are
* not returned.
*
* A FilterExpression is applied after the items have already
* been read; the process of filtering does not consume any
* additional read capacity units.
*
*
*
* For more information, see Filter Expressions in the Amazon DynamoDB Developer
* Guide.
*
*
*
* FilterExpression replaces the legacy QueryFilter and
* ConditionalOperator parameters.
*
*/
public void setFilterExpression(String filterExpression) {
this.filterExpression = filterExpression;
}
/**
*
* A string that contains conditions that DynamoDB applies after the
* Query operation, but before the data is returned to you. Items
* that do not satisfy the FilterExpression criteria are not
* returned.
*
*
*
* A FilterExpression is applied after the items have already been
* read; the process of filtering does not consume any additional read
* capacity units.
*
*
*
* For more information, see Filter Expressions in the Amazon DynamoDB Developer Guide.
*
*
*
* FilterExpression replaces the legacy QueryFilter and
* ConditionalOperator parameters.
*
*
*
* @return A string that contains conditions that DynamoDB applies after the
* Query operation, but before the data is returned to you.
* Items that do not satisfy the FilterExpression criteria
* are not returned.
*
* A FilterExpression is applied after the items have already
* been read; the process of filtering does not consume any
* additional read capacity units.
*
*
*
* For more information, see Filter Expressions in the Amazon DynamoDB Developer
* Guide.
*
*
*
* FilterExpression replaces the legacy QueryFilter
* and ConditionalOperator parameters.
*
*/
public String getFilterExpression() {
return this.filterExpression;
}
/**
*
* A string that contains conditions that DynamoDB applies after the
* Query operation, but before the data is returned to you. Items
* that do not satisfy the FilterExpression criteria are not
* returned.
*
*
*
* A FilterExpression is applied after the items have already been
* read; the process of filtering does not consume any additional read
* capacity units.
*
*
*
* For more information, see Filter Expressions in the Amazon DynamoDB Developer Guide.
*
*
*
* FilterExpression replaces the legacy QueryFilter and
* ConditionalOperator parameters.
*
*
*
* @param filterExpression
* A string that contains conditions that DynamoDB applies after the
* Query operation, but before the data is returned to you.
* Items that do not satisfy the FilterExpression criteria are
* not returned.
*
* A FilterExpression is applied after the items have already
* been read; the process of filtering does not consume any
* additional read capacity units.
*
*
*
* For more information, see Filter Expressions in the Amazon DynamoDB Developer
* Guide.
*
*
*
* FilterExpression replaces the legacy QueryFilter and
* ConditionalOperator parameters.
*
* @return Returns a reference to this object so that method calls can be
* chained together.
*/
public QueryRequest withFilterExpression(String filterExpression) {
setFilterExpression(filterExpression);
return this;
}
/**
*
* The condition that specifies the key value(s) for items to be retrieved
* by the Query action.
*
*
* The condition must perform an equality test on a single partition key
* value. The condition can also perform one of several comparison tests on
* a single sort key value. Query can use
* KeyConditionExpression to retrieve one item with a given partition
* key value and sort key value, or several items that have the same
* partition key value but different sort key values.
*
*
* The partition key equality test is required, and must be specified in the
* following format:
*
*
* partitionKeyName
= :partitionkeyval
*
*
* If you also want to provide a condition for the sort key, it must be
* combined using AND with the condition for the sort key. Following
* is an example, using the = comparison operator for the sort key:
*
*
* partitionKeyName
= :partitionkeyval
* AND sortKeyName
= :sortkeyval
*
*
* Valid comparisons for the sort key condition are as follows:
*
*
* -
*
* sortKeyName
= :sortkeyval
- true if the
* sort key value is equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
* :sortkeyval
- true if the sort key value is less than
* :sortkeyval
.
*
*
* -
*
* sortKeyName
=
* :sortkeyval
- true if the sort key value is less than or
* equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
* :sortkeyval
- true if the sort key value is greater than
* :sortkeyval
.
*
*
* -
*
* sortKeyName
=
* :sortkeyval
- true if the sort key value is greater than or
* equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
BETWEEN :sortkeyval1
* AND :sortkeyval2
- true if the sort key value is
* greater than or equal to :sortkeyval1
, and less than or
* equal to :sortkeyval2
.
*
*
* -
*
* begins_with (sortKeyName
, :sortkeyval
* ) - true if the sort key value begins with a particular operand.
* (You cannot use this function with a sort key that is of type Number.)
* Note that the function name begins_with
is case-sensitive.
*
*
*
*
* Use the ExpressionAttributeValues parameter to replace tokens such
* as :partitionval
and :sortval
with actual
* values at runtime.
*
*
* You can optionally use the ExpressionAttributeNames parameter to
* replace the names of the partition key and sort key with placeholder
* tokens. This option might be necessary if an attribute name conflicts
* with a DynamoDB reserved word. For example, the following
* KeyConditionExpression parameter causes an error because
* Size is a reserved word:
*
*
* -
Size = :myval
*
*
* To work around this, define a placeholder (such a #S
) to
* represent the attribute name Size. KeyConditionExpression
* then is as follows:
*
*
* -
#S = :myval
*
*
* For a list of reserved words, see Reserved Words in the Amazon DynamoDB Developer Guide.
*
*
* For more information on ExpressionAttributeNames and
* ExpressionAttributeValues, see Using Placeholders for Attribute Names and Values in the Amazon
* DynamoDB Developer Guide.
*
*
*
* KeyConditionExpression replaces the legacy KeyConditions
* parameter.
*
*
*
* @param keyConditionExpression
* The condition that specifies the key value(s) for items to be
* retrieved by the Query action.
*
* The condition must perform an equality test on a single partition
* key value. The condition can also perform one of several
* comparison tests on a single sort key value. Query can use
* KeyConditionExpression to retrieve one item with a given
* partition key value and sort key value, or several items that have
* the same partition key value but different sort key values.
*
*
* The partition key equality test is required, and must be specified
* in the following format:
*
*
* partitionKeyName
=
* :partitionkeyval
*
*
* If you also want to provide a condition for the sort key, it must
* be combined using AND with the condition for the sort key.
* Following is an example, using the = comparison operator
* for the sort key:
*
*
* partitionKeyName
=
* :partitionkeyval
AND sortKeyName
* = :sortkeyval
*
*
* Valid comparisons for the sort key condition are as follows:
*
*
* -
*
* sortKeyName
= :sortkeyval
- true
* if the sort key value is equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
* :sortkeyval
- true if the sort key value is less than
* :sortkeyval
.
*
*
* -
*
* sortKeyName
=
* :sortkeyval
- true if the sort key value is less than
* or equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
* :sortkeyval
- true if the sort key value is greater
* than :sortkeyval
.
*
*
* -
*
* sortKeyName
=
* :sortkeyval
- true if the sort key value is greater
* than or equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
BETWEEN :sortkeyval1
* AND :sortkeyval2
- true if the sort key value
* is greater than or equal to :sortkeyval1
, and less
* than or equal to :sortkeyval2
.
*
*
* -
*
* begins_with (sortKeyName
,
* :sortkeyval
) - true if the sort key value
* begins with a particular operand. (You cannot use this function
* with a sort key that is of type Number.) Note that the function
* name begins_with
is case-sensitive.
*
*
*
*
* Use the ExpressionAttributeValues parameter to replace
* tokens such as :partitionval
and
* :sortval
with actual values at runtime.
*
*
* You can optionally use the ExpressionAttributeNames
* parameter to replace the names of the partition key and sort key
* with placeholder tokens. This option might be necessary if an
* attribute name conflicts with a DynamoDB reserved word. For
* example, the following KeyConditionExpression parameter
* causes an error because Size is a reserved word:
*
*
* -
Size = :myval
*
*
* To work around this, define a placeholder (such a #S
)
* to represent the attribute name Size.
* KeyConditionExpression then is as follows:
*
*
* -
#S = :myval
*
*
* For a list of reserved words, see Reserved Words in the Amazon DynamoDB Developer Guide.
*
*
* For more information on ExpressionAttributeNames and
* ExpressionAttributeValues, see Using Placeholders for Attribute Names and Values in the
* Amazon DynamoDB Developer Guide.
*
*
*
* KeyConditionExpression replaces the legacy
* KeyConditions parameter.
*
*/
public void setKeyConditionExpression(String keyConditionExpression) {
this.keyConditionExpression = keyConditionExpression;
}
/**
*
* The condition that specifies the key value(s) for items to be retrieved
* by the Query action.
*
*
* The condition must perform an equality test on a single partition key
* value. The condition can also perform one of several comparison tests on
* a single sort key value. Query can use
* KeyConditionExpression to retrieve one item with a given partition
* key value and sort key value, or several items that have the same
* partition key value but different sort key values.
*
*
* The partition key equality test is required, and must be specified in the
* following format:
*
*
* partitionKeyName
= :partitionkeyval
*
*
* If you also want to provide a condition for the sort key, it must be
* combined using AND with the condition for the sort key. Following
* is an example, using the = comparison operator for the sort key:
*
*
* partitionKeyName
= :partitionkeyval
* AND sortKeyName
= :sortkeyval
*
*
* Valid comparisons for the sort key condition are as follows:
*
*
* -
*
* sortKeyName
= :sortkeyval
- true if the
* sort key value is equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
* :sortkeyval
- true if the sort key value is less than
* :sortkeyval
.
*
*
* -
*
* sortKeyName
=
* :sortkeyval
- true if the sort key value is less than or
* equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
* :sortkeyval
- true if the sort key value is greater than
* :sortkeyval
.
*
*
* -
*
* sortKeyName
=
* :sortkeyval
- true if the sort key value is greater than or
* equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
BETWEEN :sortkeyval1
* AND :sortkeyval2
- true if the sort key value is
* greater than or equal to :sortkeyval1
, and less than or
* equal to :sortkeyval2
.
*
*
* -
*
* begins_with (sortKeyName
, :sortkeyval
* ) - true if the sort key value begins with a particular operand.
* (You cannot use this function with a sort key that is of type Number.)
* Note that the function name begins_with
is case-sensitive.
*
*
*
*
* Use the ExpressionAttributeValues parameter to replace tokens such
* as :partitionval
and :sortval
with actual
* values at runtime.
*
*
* You can optionally use the ExpressionAttributeNames parameter to
* replace the names of the partition key and sort key with placeholder
* tokens. This option might be necessary if an attribute name conflicts
* with a DynamoDB reserved word. For example, the following
* KeyConditionExpression parameter causes an error because
* Size is a reserved word:
*
*
* -
Size = :myval
*
*
* To work around this, define a placeholder (such a #S
) to
* represent the attribute name Size. KeyConditionExpression
* then is as follows:
*
*
* -
#S = :myval
*
*
* For a list of reserved words, see Reserved Words in the Amazon DynamoDB Developer Guide.
*
*
* For more information on ExpressionAttributeNames and
* ExpressionAttributeValues, see Using Placeholders for Attribute Names and Values in the Amazon
* DynamoDB Developer Guide.
*
*
*
* KeyConditionExpression replaces the legacy KeyConditions
* parameter.
*
*
*
* @return The condition that specifies the key value(s) for items to be
* retrieved by the Query action.
*
* The condition must perform an equality test on a single partition
* key value. The condition can also perform one of several
* comparison tests on a single sort key value. Query can use
* KeyConditionExpression to retrieve one item with a given
* partition key value and sort key value, or several items that
* have the same partition key value but different sort key values.
*
*
* The partition key equality test is required, and must be
* specified in the following format:
*
*
* partitionKeyName
=
* :partitionkeyval
*
*
* If you also want to provide a condition for the sort key, it must
* be combined using AND with the condition for the sort key.
* Following is an example, using the = comparison operator
* for the sort key:
*
*
* partitionKeyName
=
* :partitionkeyval
AND sortKeyName
* = :sortkeyval
*
*
* Valid comparisons for the sort key condition are as follows:
*
*
* -
*
* sortKeyName
= :sortkeyval
- true
* if the sort key value is equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
* :sortkeyval
- true if the sort key value is less
* than :sortkeyval
.
*
*
* -
*
* sortKeyName
=
* :sortkeyval
- true if the sort key value is less
* than or equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
* :sortkeyval
- true if the sort key value is greater
* than :sortkeyval
.
*
*
* -
*
* sortKeyName
=
* :sortkeyval
- true if the sort key value is greater
* than or equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
BETWEEN :sortkeyval1
* AND :sortkeyval2
- true if the sort key value
* is greater than or equal to :sortkeyval1
, and less
* than or equal to :sortkeyval2
.
*
*
* -
*
* begins_with (sortKeyName
,
* :sortkeyval
) - true if the sort key value
* begins with a particular operand. (You cannot use this function
* with a sort key that is of type Number.) Note that the function
* name begins_with
is case-sensitive.
*
*
*
*
* Use the ExpressionAttributeValues parameter to replace
* tokens such as :partitionval
and
* :sortval
with actual values at runtime.
*
*
* You can optionally use the ExpressionAttributeNames
* parameter to replace the names of the partition key and sort key
* with placeholder tokens. This option might be necessary if an
* attribute name conflicts with a DynamoDB reserved word. For
* example, the following KeyConditionExpression parameter
* causes an error because Size is a reserved word:
*
*
* -
Size = :myval
*
*
* To work around this, define a placeholder (such a #S
* ) to represent the attribute name Size.
* KeyConditionExpression then is as follows:
*
*
* -
#S = :myval
*
*
* For a list of reserved words, see Reserved Words in the Amazon DynamoDB Developer
* Guide.
*
*
* For more information on ExpressionAttributeNames and
* ExpressionAttributeValues, see Using Placeholders for Attribute Names and Values in the
* Amazon DynamoDB Developer Guide.
*
*
*
* KeyConditionExpression replaces the legacy
* KeyConditions parameter.
*
*/
public String getKeyConditionExpression() {
return this.keyConditionExpression;
}
/**
*
* The condition that specifies the key value(s) for items to be retrieved
* by the Query action.
*
*
* The condition must perform an equality test on a single partition key
* value. The condition can also perform one of several comparison tests on
* a single sort key value. Query can use
* KeyConditionExpression to retrieve one item with a given partition
* key value and sort key value, or several items that have the same
* partition key value but different sort key values.
*
*
* The partition key equality test is required, and must be specified in the
* following format:
*
*
* partitionKeyName
= :partitionkeyval
*
*
* If you also want to provide a condition for the sort key, it must be
* combined using AND with the condition for the sort key. Following
* is an example, using the = comparison operator for the sort key:
*
*
* partitionKeyName
= :partitionkeyval
* AND sortKeyName
= :sortkeyval
*
*
* Valid comparisons for the sort key condition are as follows:
*
*
* -
*
* sortKeyName
= :sortkeyval
- true if the
* sort key value is equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
* :sortkeyval
- true if the sort key value is less than
* :sortkeyval
.
*
*
* -
*
* sortKeyName
=
* :sortkeyval
- true if the sort key value is less than or
* equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
* :sortkeyval
- true if the sort key value is greater than
* :sortkeyval
.
*
*
* -
*
* sortKeyName
=
* :sortkeyval
- true if the sort key value is greater than or
* equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
BETWEEN :sortkeyval1
* AND :sortkeyval2
- true if the sort key value is
* greater than or equal to :sortkeyval1
, and less than or
* equal to :sortkeyval2
.
*
*
* -
*
* begins_with (sortKeyName
, :sortkeyval
* ) - true if the sort key value begins with a particular operand.
* (You cannot use this function with a sort key that is of type Number.)
* Note that the function name begins_with
is case-sensitive.
*
*
*
*
* Use the ExpressionAttributeValues parameter to replace tokens such
* as :partitionval
and :sortval
with actual
* values at runtime.
*
*
* You can optionally use the ExpressionAttributeNames parameter to
* replace the names of the partition key and sort key with placeholder
* tokens. This option might be necessary if an attribute name conflicts
* with a DynamoDB reserved word. For example, the following
* KeyConditionExpression parameter causes an error because
* Size is a reserved word:
*
*
* -
Size = :myval
*
*
* To work around this, define a placeholder (such a #S
) to
* represent the attribute name Size. KeyConditionExpression
* then is as follows:
*
*
* -
#S = :myval
*
*
* For a list of reserved words, see Reserved Words in the Amazon DynamoDB Developer Guide.
*
*
* For more information on ExpressionAttributeNames and
* ExpressionAttributeValues, see Using Placeholders for Attribute Names and Values in the Amazon
* DynamoDB Developer Guide.
*
*
*
* KeyConditionExpression replaces the legacy KeyConditions
* parameter.
*
*
*
* @param keyConditionExpression
* The condition that specifies the key value(s) for items to be
* retrieved by the Query action.
*
* The condition must perform an equality test on a single partition
* key value. The condition can also perform one of several
* comparison tests on a single sort key value. Query can use
* KeyConditionExpression to retrieve one item with a given
* partition key value and sort key value, or several items that have
* the same partition key value but different sort key values.
*
*
* The partition key equality test is required, and must be specified
* in the following format:
*
*
* partitionKeyName
=
* :partitionkeyval
*
*
* If you also want to provide a condition for the sort key, it must
* be combined using AND with the condition for the sort key.
* Following is an example, using the = comparison operator
* for the sort key:
*
*
* partitionKeyName
=
* :partitionkeyval
AND sortKeyName
* = :sortkeyval
*
*
* Valid comparisons for the sort key condition are as follows:
*
*
* -
*
* sortKeyName
= :sortkeyval
- true
* if the sort key value is equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
* :sortkeyval
- true if the sort key value is less than
* :sortkeyval
.
*
*
* -
*
* sortKeyName
=
* :sortkeyval
- true if the sort key value is less than
* or equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
* :sortkeyval
- true if the sort key value is greater
* than :sortkeyval
.
*
*
* -
*
* sortKeyName
=
* :sortkeyval
- true if the sort key value is greater
* than or equal to :sortkeyval
.
*
*
* -
*
* sortKeyName
BETWEEN :sortkeyval1
* AND :sortkeyval2
- true if the sort key value
* is greater than or equal to :sortkeyval1
, and less
* than or equal to :sortkeyval2
.
*
*
* -
*
* begins_with (sortKeyName
,
* :sortkeyval
) - true if the sort key value
* begins with a particular operand. (You cannot use this function
* with a sort key that is of type Number.) Note that the function
* name begins_with
is case-sensitive.
*
*
*
*
* Use the ExpressionAttributeValues parameter to replace
* tokens such as :partitionval
and
* :sortval
with actual values at runtime.
*
*
* You can optionally use the ExpressionAttributeNames
* parameter to replace the names of the partition key and sort key
* with placeholder tokens. This option might be necessary if an
* attribute name conflicts with a DynamoDB reserved word. For
* example, the following KeyConditionExpression parameter
* causes an error because Size is a reserved word:
*
*
* -
Size = :myval
*
*
* To work around this, define a placeholder (such a #S
)
* to represent the attribute name Size.
* KeyConditionExpression then is as follows:
*
*
* -
#S = :myval
*
*
* For a list of reserved words, see Reserved Words in the Amazon DynamoDB Developer Guide.
*
*
* For more information on ExpressionAttributeNames and
* ExpressionAttributeValues, see Using Placeholders for Attribute Names and Values in the
* Amazon DynamoDB Developer Guide.
*
*
*
* KeyConditionExpression replaces the legacy
* KeyConditions parameter.
*
* @return Returns a reference to this object so that method calls can be
* chained together.
*/
public QueryRequest withKeyConditionExpression(String keyConditionExpression) {
setKeyConditionExpression(keyConditionExpression);
return this;
}
/**
*
* One or more substitution tokens for attribute names in an expression. The
* following are some use cases for using ExpressionAttributeNames:
*
*
* -
*
* To access an attribute whose name conflicts with a DynamoDB reserved
* word.
*
*
* -
*
* To create a placeholder for repeating occurrences of an attribute name in
* an expression.
*
*
* -
*
* To prevent special characters in an attribute name from being
* misinterpreted in an expression.
*
*
*
*
* Use the # character in an expression to dereference an attribute
* name. For example, consider the following attribute name:
*
*
* -
*
* Percentile
*
*
*
*
* The name of this attribute conflicts with a reserved word, so it cannot
* be used directly in an expression. (For the complete list of reserved
* words, see Reserved Words in the Amazon DynamoDB Developer Guide). To
* work around this, you could specify the following for
* ExpressionAttributeNames:
*
*
* -
*
* {"#P":"Percentile"}
*
*
*
*
* You could then use this substitution in an expression, as in this
* example:
*
*
* -
*
* #P = :val
*
*
*
*
*
* Tokens that begin with the : character are expression attribute
* values, which are placeholders for the actual value at runtime.
*
*
*
* For more information on expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer
* Guide.
*
*
* @return One or more substitution tokens for attribute names in an
* expression. The following are some use cases for using
* ExpressionAttributeNames:
*
* -
*
* To access an attribute whose name conflicts with a DynamoDB
* reserved word.
*
*
* -
*
* To create a placeholder for repeating occurrences of an attribute
* name in an expression.
*
*
* -
*
* To prevent special characters in an attribute name from being
* misinterpreted in an expression.
*
*
*
*
* Use the # character in an expression to dereference an
* attribute name. For example, consider the following attribute
* name:
*
*
* -
*
* Percentile
*
*
*
*
* The name of this attribute conflicts with a reserved word, so it
* cannot be used directly in an expression. (For the complete list
* of reserved words, see Reserved Words in the Amazon DynamoDB Developer
* Guide). To work around this, you could specify the following
* for ExpressionAttributeNames:
*
*
* -
*
* {"#P":"Percentile"}
*
*
*
*
* You could then use this substitution in an expression, as in this
* example:
*
*
* -
*
* #P = :val
*
*
*
*
*
* Tokens that begin with the : character are expression
* attribute values, which are placeholders for the actual value
* at runtime.
*
*
*
* For more information on expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB
* Developer Guide.
*/
public java.util.Map getExpressionAttributeNames() {
return expressionAttributeNames;
}
/**
*
* One or more substitution tokens for attribute names in an expression. The
* following are some use cases for using ExpressionAttributeNames:
*
*
* -
*
* To access an attribute whose name conflicts with a DynamoDB reserved
* word.
*
*
* -
*
* To create a placeholder for repeating occurrences of an attribute name in
* an expression.
*
*
* -
*
* To prevent special characters in an attribute name from being
* misinterpreted in an expression.
*
*
*
*
* Use the # character in an expression to dereference an attribute
* name. For example, consider the following attribute name:
*
*
* -
*
* Percentile
*
*
*
*
* The name of this attribute conflicts with a reserved word, so it cannot
* be used directly in an expression. (For the complete list of reserved
* words, see Reserved Words in the Amazon DynamoDB Developer Guide). To
* work around this, you could specify the following for
* ExpressionAttributeNames:
*
*
* -
*
* {"#P":"Percentile"}
*
*
*
*
* You could then use this substitution in an expression, as in this
* example:
*
*
* -
*
* #P = :val
*
*
*
*
*
* Tokens that begin with the : character are expression attribute
* values, which are placeholders for the actual value at runtime.
*
*
*
* For more information on expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer
* Guide.
*
*
* @param expressionAttributeNames
* One or more substitution tokens for attribute names in an
* expression. The following are some use cases for using
* ExpressionAttributeNames:
*
* -
*
* To access an attribute whose name conflicts with a DynamoDB
* reserved word.
*
*
* -
*
* To create a placeholder for repeating occurrences of an attribute
* name in an expression.
*
*
* -
*
* To prevent special characters in an attribute name from being
* misinterpreted in an expression.
*
*
*
*
* Use the # character in an expression to dereference an
* attribute name. For example, consider the following attribute
* name:
*
*
* -
*
* Percentile
*
*
*
*
* The name of this attribute conflicts with a reserved word, so it
* cannot be used directly in an expression. (For the complete list
* of reserved words, see Reserved Words in the Amazon DynamoDB Developer
* Guide). To work around this, you could specify the following
* for ExpressionAttributeNames:
*
*
* -
*
* {"#P":"Percentile"}
*
*
*
*
* You could then use this substitution in an expression, as in this
* example:
*
*
* -
*
* #P = :val
*
*
*
*
*
* Tokens that begin with the : character are expression
* attribute values, which are placeholders for the actual value
* at runtime.
*
*
*
* For more information on expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer
* Guide.
*/
public void setExpressionAttributeNames(
java.util.Map expressionAttributeNames) {
this.expressionAttributeNames = expressionAttributeNames;
}
/**
*
* One or more substitution tokens for attribute names in an expression. The
* following are some use cases for using ExpressionAttributeNames:
*
*
* -
*
* To access an attribute whose name conflicts with a DynamoDB reserved
* word.
*
*
* -
*
* To create a placeholder for repeating occurrences of an attribute name in
* an expression.
*
*
* -
*
* To prevent special characters in an attribute name from being
* misinterpreted in an expression.
*
*
*
*
* Use the # character in an expression to dereference an attribute
* name. For example, consider the following attribute name:
*
*
* -
*
* Percentile
*
*
*
*
* The name of this attribute conflicts with a reserved word, so it cannot
* be used directly in an expression. (For the complete list of reserved
* words, see Reserved Words in the Amazon DynamoDB Developer Guide). To
* work around this, you could specify the following for
* ExpressionAttributeNames:
*
*
* -
*
* {"#P":"Percentile"}
*
*
*
*
* You could then use this substitution in an expression, as in this
* example:
*
*
* -
*
* #P = :val
*
*
*
*
*
* Tokens that begin with the : character are expression attribute
* values, which are placeholders for the actual value at runtime.
*
*
*
* For more information on expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer
* Guide.
*
*
* @param expressionAttributeNames
* One or more substitution tokens for attribute names in an
* expression. The following are some use cases for using
* ExpressionAttributeNames:
*
* -
*
* To access an attribute whose name conflicts with a DynamoDB
* reserved word.
*
*
* -
*
* To create a placeholder for repeating occurrences of an attribute
* name in an expression.
*
*
* -
*
* To prevent special characters in an attribute name from being
* misinterpreted in an expression.
*
*
*
*
* Use the # character in an expression to dereference an
* attribute name. For example, consider the following attribute
* name:
*
*
* -
*
* Percentile
*
*
*
*
* The name of this attribute conflicts with a reserved word, so it
* cannot be used directly in an expression. (For the complete list
* of reserved words, see Reserved Words in the Amazon DynamoDB Developer
* Guide). To work around this, you could specify the following
* for ExpressionAttributeNames:
*
*
* -
*
* {"#P":"Percentile"}
*
*
*
*
* You could then use this substitution in an expression, as in this
* example:
*
*
* -
*
* #P = :val
*
*
*
*
*
* Tokens that begin with the : character are expression
* attribute values, which are placeholders for the actual value
* at runtime.
*
*
*
* For more information on expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer
* Guide.
* @return Returns a reference to this object so that method calls can be
* chained together.
*/
public QueryRequest withExpressionAttributeNames(
java.util.Map expressionAttributeNames) {
setExpressionAttributeNames(expressionAttributeNames);
return this;
}
public QueryRequest addExpressionAttributeNamesEntry(String key,
String value) {
if (null == this.expressionAttributeNames) {
this.expressionAttributeNames = new java.util.HashMap();
}
if (this.expressionAttributeNames.containsKey(key))
throw new IllegalArgumentException("Duplicated keys ("
+ key.toString() + ") are provided.");
this.expressionAttributeNames.put(key, value);
return this;
}
/**
* Removes all the entries added into ExpressionAttributeNames. <p>
* Returns a reference to this object so that method calls can be chained
* together.
*/
public QueryRequest clearExpressionAttributeNamesEntries() {
this.expressionAttributeNames = null;
return this;
}
/**
*
* One or more values that can be substituted in an expression.
*
*
* Use the : (colon) character in an expression to dereference an
* attribute value. For example, suppose that you wanted to check whether
* the value of the ProductStatus attribute was one of the following:
*
*
* Available | Backordered | Discontinued
*
*
* You would first need to specify ExpressionAttributeValues as
* follows:
*
*
* { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
*
*
* You could then use these values in an expression, such as this:
*
*
* ProductStatus IN (:avail, :back, :disc)
*
*
* For more information on expression attribute values, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
*
*
* @return One or more values that can be substituted in an expression.
*
* Use the : (colon) character in an expression to
* dereference an attribute value. For example, suppose that you
* wanted to check whether the value of the ProductStatus
* attribute was one of the following:
*
*
* Available | Backordered | Discontinued
*
*
* You would first need to specify ExpressionAttributeValues
* as follows:
*
*
* { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
*
*
* You could then use these values in an expression, such as this:
*
*
* ProductStatus IN (:avail, :back, :disc)
*
*
* For more information on expression attribute values, see Specifying Conditions in the Amazon DynamoDB Developer
* Guide.
*/
public java.util.Map getExpressionAttributeValues() {
return expressionAttributeValues;
}
/**
*
* One or more values that can be substituted in an expression.
*
*
* Use the : (colon) character in an expression to dereference an
* attribute value. For example, suppose that you wanted to check whether
* the value of the ProductStatus attribute was one of the following:
*
*
* Available | Backordered | Discontinued
*
*
* You would first need to specify ExpressionAttributeValues as
* follows:
*
*
* { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
*
*
* You could then use these values in an expression, such as this:
*
*
* ProductStatus IN (:avail, :back, :disc)
*
*
* For more information on expression attribute values, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
*
*
* @param expressionAttributeValues
* One or more values that can be substituted in an expression.
*
* Use the : (colon) character in an expression to dereference
* an attribute value. For example, suppose that you wanted to check
* whether the value of the ProductStatus attribute was one of
* the following:
*
*
* Available | Backordered | Discontinued
*
*
* You would first need to specify ExpressionAttributeValues
* as follows:
*
*
* { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
*
*
* You could then use these values in an expression, such as this:
*
*
* ProductStatus IN (:avail, :back, :disc)
*
*
* For more information on expression attribute values, see Specifying Conditions in the Amazon DynamoDB Developer
* Guide.
*/
public void setExpressionAttributeValues(
java.util.Map expressionAttributeValues) {
this.expressionAttributeValues = expressionAttributeValues;
}
/**
*
* One or more values that can be substituted in an expression.
*
*
* Use the : (colon) character in an expression to dereference an
* attribute value. For example, suppose that you wanted to check whether
* the value of the ProductStatus attribute was one of the following:
*
*
* Available | Backordered | Discontinued
*
*
* You would first need to specify ExpressionAttributeValues as
* follows:
*
*
* { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
*
*
* You could then use these values in an expression, such as this:
*
*
* ProductStatus IN (:avail, :back, :disc)
*
*
* For more information on expression attribute values, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
*
*
* @param expressionAttributeValues
* One or more values that can be substituted in an expression.
*
* Use the : (colon) character in an expression to dereference
* an attribute value. For example, suppose that you wanted to check
* whether the value of the ProductStatus attribute was one of
* the following:
*
*
* Available | Backordered | Discontinued
*
*
* You would first need to specify ExpressionAttributeValues
* as follows:
*
*
* { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
*
*
* You could then use these values in an expression, such as this:
*
*
* ProductStatus IN (:avail, :back, :disc)
*
*
* For more information on expression attribute values, see Specifying Conditions in the Amazon DynamoDB Developer
* Guide.
* @return Returns a reference to this object so that method calls can be
* chained together.
*/
public QueryRequest withExpressionAttributeValues(
java.util.Map expressionAttributeValues) {
setExpressionAttributeValues(expressionAttributeValues);
return this;
}
public QueryRequest addExpressionAttributeValuesEntry(String key,
AttributeValue value) {
if (null == this.expressionAttributeValues) {
this.expressionAttributeValues = new java.util.HashMap();
}
if (this.expressionAttributeValues.containsKey(key))
throw new IllegalArgumentException("Duplicated keys ("
+ key.toString() + ") are provided.");
this.expressionAttributeValues.put(key, value);
return this;
}
/**
* Removes all the entries added into ExpressionAttributeValues. <p>
* Returns a reference to this object so that method calls can be chained
* together.
*/
public QueryRequest clearExpressionAttributeValuesEntries() {
this.expressionAttributeValues = null;
return this;
}
/**
* The primary hash and range keys of the first item that this operation
* will evaluate. Use the value that was returned for
* LastEvaluatedKey in the previous operation.
*
* The data type for ExclusiveStartKey must be String, Number or
* Binary. No set data types are allowed.
*
* @param hashKey
* a map entry including the name and value of the primary hash key.
* @param rangeKey
* a map entry including the name and value of the primary range key,
* or null if it is a hash-only table.
*/
public void setExclusiveStartKey(
java.util.Map.Entry hashKey,
java.util.Map.Entry rangeKey)
throws IllegalArgumentException {
java.util.HashMap exclusiveStartKey = new java.util.HashMap();
if (hashKey != null) {
exclusiveStartKey.put(hashKey.getKey(), hashKey.getValue());
} else {
throw new IllegalArgumentException(
"hashKey must be non-null object.");
}
if (rangeKey != null) {
exclusiveStartKey.put(rangeKey.getKey(), rangeKey.getValue());
}
setExclusiveStartKey(exclusiveStartKey);
}
/**
* The primary hash and range keys of the first item that this operation
* will evaluate. Use the value that was returned for
* LastEvaluatedKey in the previous operation.
*
* The data type for ExclusiveStartKey must be String, Number or
* Binary. No set data types are allowed.
*
* Returns a reference to this object so that method calls can be chained
* together.
*
* @param hashKey
* a map entry including the name and value of the primary hash key.
* @param rangeKey
* a map entry including the name and value of the primary range key,
* or null if it is a hash-only table.
*/
public QueryRequest withExclusiveStartKey(
java.util.Map.Entry hashKey,
java.util.Map.Entry rangeKey)
throws IllegalArgumentException {
setExclusiveStartKey(hashKey, rangeKey);
return this;
}
/**
* Returns a string representation of this object; useful for testing and
* debugging.
*
* @return A string representation of this object.
*
* @see java.lang.Object#toString()
*/
@Override
public String toString() {
StringBuilder sb = new StringBuilder();
sb.append("{");
if (getTableName() != null)
sb.append("TableName: " + getTableName() + ",");
if (getIndexName() != null)
sb.append("IndexName: " + getIndexName() + ",");
if (getSelect() != null)
sb.append("Select: " + getSelect() + ",");
if (getAttributesToGet() != null)
sb.append("AttributesToGet: " + getAttributesToGet() + ",");
if (getLimit() != null)
sb.append("Limit: " + getLimit() + ",");
if (getConsistentRead() != null)
sb.append("ConsistentRead: " + getConsistentRead() + ",");
if (getKeyConditions() != null)
sb.append("KeyConditions: " + getKeyConditions() + ",");
if (getQueryFilter() != null)
sb.append("QueryFilter: " + getQueryFilter() + ",");
if (getConditionalOperator() != null)
sb.append("ConditionalOperator: " + getConditionalOperator() + ",");
if (getScanIndexForward() != null)
sb.append("ScanIndexForward: " + getScanIndexForward() + ",");
if (getExclusiveStartKey() != null)
sb.append("ExclusiveStartKey: " + getExclusiveStartKey() + ",");
if (getReturnConsumedCapacity() != null)
sb.append("ReturnConsumedCapacity: " + getReturnConsumedCapacity()
+ ",");
if (getProjectionExpression() != null)
sb.append("ProjectionExpression: " + getProjectionExpression()
+ ",");
if (getFilterExpression() != null)
sb.append("FilterExpression: " + getFilterExpression() + ",");
if (getKeyConditionExpression() != null)
sb.append("KeyConditionExpression: " + getKeyConditionExpression()
+ ",");
if (getExpressionAttributeNames() != null)
sb.append("ExpressionAttributeNames: "
+ getExpressionAttributeNames() + ",");
if (getExpressionAttributeValues() != null)
sb.append("ExpressionAttributeValues: "
+ getExpressionAttributeValues());
sb.append("}");
return sb.toString();
}
@Override
public boolean equals(Object obj) {
if (this == obj)
return true;
if (obj == null)
return false;
if (obj instanceof QueryRequest == false)
return false;
QueryRequest other = (QueryRequest) obj;
if (other.getTableName() == null ^ this.getTableName() == null)
return false;
if (other.getTableName() != null
&& other.getTableName().equals(this.getTableName()) == false)
return false;
if (other.getIndexName() == null ^ this.getIndexName() == null)
return false;
if (other.getIndexName() != null
&& other.getIndexName().equals(this.getIndexName()) == false)
return false;
if (other.getSelect() == null ^ this.getSelect() == null)
return false;
if (other.getSelect() != null
&& other.getSelect().equals(this.getSelect()) == false)
return false;
if (other.getAttributesToGet() == null
^ this.getAttributesToGet() == null)
return false;
if (other.getAttributesToGet() != null
&& other.getAttributesToGet().equals(this.getAttributesToGet()) == false)
return false;
if (other.getLimit() == null ^ this.getLimit() == null)
return false;
if (other.getLimit() != null
&& other.getLimit().equals(this.getLimit()) == false)
return false;
if (other.getConsistentRead() == null
^ this.getConsistentRead() == null)
return false;
if (other.getConsistentRead() != null
&& other.getConsistentRead().equals(this.getConsistentRead()) == false)
return false;
if (other.getKeyConditions() == null ^ this.getKeyConditions() == null)
return false;
if (other.getKeyConditions() != null
&& other.getKeyConditions().equals(this.getKeyConditions()) == false)
return false;
if (other.getQueryFilter() == null ^ this.getQueryFilter() == null)
return false;
if (other.getQueryFilter() != null
&& other.getQueryFilter().equals(this.getQueryFilter()) == false)
return false;
if (other.getConditionalOperator() == null
^ this.getConditionalOperator() == null)
return false;
if (other.getConditionalOperator() != null
&& other.getConditionalOperator().equals(
this.getConditionalOperator()) == false)
return false;
if (other.getScanIndexForward() == null
^ this.getScanIndexForward() == null)
return false;
if (other.getScanIndexForward() != null
&& other.getScanIndexForward().equals(
this.getScanIndexForward()) == false)
return false;
if (other.getExclusiveStartKey() == null
^ this.getExclusiveStartKey() == null)
return false;
if (other.getExclusiveStartKey() != null
&& other.getExclusiveStartKey().equals(
this.getExclusiveStartKey()) == false)
return false;
if (other.getReturnConsumedCapacity() == null
^ this.getReturnConsumedCapacity() == null)
return false;
if (other.getReturnConsumedCapacity() != null
&& other.getReturnConsumedCapacity().equals(
this.getReturnConsumedCapacity()) == false)
return false;
if (other.getProjectionExpression() == null
^ this.getProjectionExpression() == null)
return false;
if (other.getProjectionExpression() != null
&& other.getProjectionExpression().equals(
this.getProjectionExpression()) == false)
return false;
if (other.getFilterExpression() == null
^ this.getFilterExpression() == null)
return false;
if (other.getFilterExpression() != null
&& other.getFilterExpression().equals(
this.getFilterExpression()) == false)
return false;
if (other.getKeyConditionExpression() == null
^ this.getKeyConditionExpression() == null)
return false;
if (other.getKeyConditionExpression() != null
&& other.getKeyConditionExpression().equals(
this.getKeyConditionExpression()) == false)
return false;
if (other.getExpressionAttributeNames() == null
^ this.getExpressionAttributeNames() == null)
return false;
if (other.getExpressionAttributeNames() != null
&& other.getExpressionAttributeNames().equals(
this.getExpressionAttributeNames()) == false)
return false;
if (other.getExpressionAttributeValues() == null
^ this.getExpressionAttributeValues() == null)
return false;
if (other.getExpressionAttributeValues() != null
&& other.getExpressionAttributeValues().equals(
this.getExpressionAttributeValues()) == false)
return false;
return true;
}
@Override
public int hashCode() {
final int prime = 31;
int hashCode = 1;
hashCode = prime * hashCode
+ ((getTableName() == null) ? 0 : getTableName().hashCode());
hashCode = prime * hashCode
+ ((getIndexName() == null) ? 0 : getIndexName().hashCode());
hashCode = prime * hashCode
+ ((getSelect() == null) ? 0 : getSelect().hashCode());
hashCode = prime
* hashCode
+ ((getAttributesToGet() == null) ? 0 : getAttributesToGet()
.hashCode());
hashCode = prime * hashCode
+ ((getLimit() == null) ? 0 : getLimit().hashCode());
hashCode = prime
* hashCode
+ ((getConsistentRead() == null) ? 0 : getConsistentRead()
.hashCode());
hashCode = prime
* hashCode
+ ((getKeyConditions() == null) ? 0 : getKeyConditions()
.hashCode());
hashCode = prime
* hashCode
+ ((getQueryFilter() == null) ? 0 : getQueryFilter().hashCode());
hashCode = prime
* hashCode
+ ((getConditionalOperator() == null) ? 0
: getConditionalOperator().hashCode());
hashCode = prime
* hashCode
+ ((getScanIndexForward() == null) ? 0 : getScanIndexForward()
.hashCode());
hashCode = prime
* hashCode
+ ((getExclusiveStartKey() == null) ? 0
: getExclusiveStartKey().hashCode());
hashCode = prime
* hashCode
+ ((getReturnConsumedCapacity() == null) ? 0
: getReturnConsumedCapacity().hashCode());
hashCode = prime
* hashCode
+ ((getProjectionExpression() == null) ? 0
: getProjectionExpression().hashCode());
hashCode = prime
* hashCode
+ ((getFilterExpression() == null) ? 0 : getFilterExpression()
.hashCode());
hashCode = prime
* hashCode
+ ((getKeyConditionExpression() == null) ? 0
: getKeyConditionExpression().hashCode());
hashCode = prime
* hashCode
+ ((getExpressionAttributeNames() == null) ? 0
: getExpressionAttributeNames().hashCode());
hashCode = prime
* hashCode
+ ((getExpressionAttributeValues() == null) ? 0
: getExpressionAttributeValues().hashCode());
return hashCode;
}
@Override
public QueryRequest clone() {
return (QueryRequest) super.clone();
}
}