com.amazonaws.services.dynamodbv2.model.PutItemRequest Maven / Gradle / Ivy
Show all versions of aws-java-sdk-dynamodb Show documentation
/*
* Copyright 2011-2016 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with
* the License. A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions
* and limitations under the License.
*/
package com.amazonaws.services.dynamodbv2.model;
import java.io.Serializable;
import com.amazonaws.AmazonWebServiceRequest;
/**
*
* Represents the input of a PutItem operation.
*
*/
public class PutItemRequest extends com.amazonaws.AmazonWebServiceRequest implements Serializable, Cloneable {
/**
*
* The name of the table to contain the item.
*
*/
private String tableName;
/**
*
* A map of attribute name/value pairs, one for each attribute. Only the primary key attributes are required; you
* can optionally provide other attribute name-value pairs for the item.
*
*
* You must provide all of the attributes for the primary key. For example, with a simple primary key, you only need
* to provide a value for the partition key. For a composite primary key, you must provide both values for both the
* partition key and the sort key.
*
*
* If you specify any attributes that are part of an index key, then the data types for those attributes must match
* those of the schema in the table's attribute definition.
*
*
* For more information about primary keys, see Primary
* Key in the Amazon DynamoDB Developer Guide.
*
*
* Each element in the Item map is an AttributeValue object.
*
*/
private java.util.Map item;
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression
* instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB
* will return a ValidationException exception.
*
*
*
* A map of attribute/condition pairs. Expected provides a conditional block for the PutItem
* operation.
*
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* Each element of Expected consists of an attribute name, a comparison operator, and one or more values.
* DynamoDB compares the attribute with the value(s) you supplied, using the comparison operator. For each
* Expected element, the result of the evaluation is either true or false.
*
*
* If you specify more than one element in the Expected map, then by default all of the conditions must
* evaluate to true. In other words, the conditions are ANDed together. (You can use the ConditionalOperator
* parameter to OR the conditions instead. If you do this, then at least one of the conditions must evaluate to
* true, rather than all of them.)
*
*
* If the Expected map evaluates to true, then the conditional operation succeeds; otherwise, it fails.
*
*
* Expected contains the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate against the supplied attribute. The number of values
* in the list depends on the ComparisonOperator being used.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than are based on ASCII character code values. For
* example, a is greater than A, and a is greater than B. For a
* list of code values, see http://en.wikipedia
* .org/wiki/ASCII#ASCII_printable_characters.
*
*
* For type Binary, DynamoDB treats each byte of the binary data as unsigned when it compares binary values.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating attributes in the AttributeValueList. When
* performing the comparison, DynamoDB uses strongly consistent reads.
*
*
* The following comparison operators are available:
*
*
* EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN
*
*
* The following are descriptions of each comparison operator.
*
*
* -
*
* EQ : Equal. EQ is supported for all datatypes, including lists and maps.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, Binary,
* String Set, Number Set, or Binary Set. If an item contains an AttributeValue element of a different type
* than the one provided in the request, the value does not match. For example, {"S":"6"} does not
* equal {"N":"6"}. Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
*
*
* -
*
* NE : Not equal. NE is supported for all datatypes, including lists and maps.
*
*
* AttributeValueList can contain only one AttributeValue of type String, Number, Binary, String Set,
* Number Set, or Binary Set. If an item contains an AttributeValue of a different type than the one provided
* in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
*
*
* -
*
* LE : Less than or equal.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue element of a different type than the one provided
* in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to {"NS":["6", "2", "1"]}.
*
*
* -
*
* LT : Less than.
*
*
* AttributeValueList can contain only one AttributeValue of type String, Number, or Binary (not a set
* type). If an item contains an AttributeValue element of a different type than the one provided in the
* request, the value does not match. For example, {"S":"6"} does not equal {"N":"6"}.
* Also, {"N":"6"} does not compare to {"NS":["6", "2", "1"]}.
*
*
* -
*
* GE : Greater than or equal.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue element of a different type than the one provided
* in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to {"NS":["6", "2", "1"]}.
*
*
* -
*
* GT : Greater than.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue element of a different type than the one provided
* in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to {"NS":["6", "2", "1"]}.
*
*
* -
*
* NOT_NULL : The attribute exists. NOT_NULL is supported for all datatypes, including
* lists and maps.
*
*
*
* This operator tests for the existence of an attribute, not its data type. If the data type of attribute "
* a" is null, and you evaluate it using NOT_NULL, the result is a Boolean true.
* This result is because the attribute "a" exists; its data type is not relevant to the
* NOT_NULL comparison operator.
*
*
* -
*
* NULL : The attribute does not exist. NULL is supported for all datatypes, including
* lists and maps.
*
*
*
* This operator tests for the nonexistence of an attribute, not its data type. If the data type of attribute "
* a" is null, and you evaluate it using NULL, the result is a Boolean false. This
* is because the attribute "a" exists; its data type is not relevant to the NULL
* comparison operator.
*
*
* -
*
* CONTAINS : Checks for a subsequence, or value in a set.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or Binary
* (not a set type). If the target attribute of the comparison is of type String, then the operator checks for a
* substring match. If the target attribute of the comparison is of type Binary, then the operator looks for a
* subsequence of the target that matches the input. If the target attribute of the comparison is a set ("
* SS", "NS", or "BS"), then the operator evaluates to true if it finds an
* exact match with any member of the set.
*
*
* CONTAINS is supported for lists: When evaluating "a CONTAINS b", "a
* " can be a list; however, "b" cannot be a set, a map, or a list.
*
*
* -
*
* NOT_CONTAINS : Checks for absence of a subsequence, or absence of a value in a set.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or Binary
* (not a set type). If the target attribute of the comparison is a String, then the operator checks for the absence
* of a substring match. If the target attribute of the comparison is Binary, then the operator checks for the
* absence of a subsequence of the target that matches the input. If the target attribute of the comparison is a set
* ("SS", "NS", or "BS"), then the operator evaluates to true if it does
* not find an exact match with any member of the set.
*
*
* NOT_CONTAINS is supported for lists: When evaluating "a NOT CONTAINS b", "a
* " can be a list; however, "b" cannot be a set, a map, or a list.
*
*
* -
*
* BEGINS_WITH : Checks for a prefix.
*
*
* AttributeValueList can contain only one AttributeValue of type String or Binary (not a Number or a
* set type). The target attribute of the comparison must be of type String or Binary (not a Number or a set type).
*
*
* -
*
* IN : Checks for matching elements within two sets.
*
*
* AttributeValueList can contain one or more AttributeValue elements of type String, Number, or
* Binary (not a set type). These attributes are compared against an existing set type attribute of an item. If any
* elements of the input set are present in the item attribute, the expression evaluates to true.
*
*
* -
*
* BETWEEN : Greater than or equal to the first value, and less than or equal to the second value.
*
*
* AttributeValueList must contain two AttributeValue elements of the same type, either String,
* Number, or Binary (not a set type). A target attribute matches if the target value is greater than, or equal to,
* the first element and less than, or equal to, the second element. If an item contains an AttributeValue
* element of a different type than the one provided in the request, the value does not match. For example,
* {"S":"6"} does not compare to {"N":"6"}. Also, {"N":"6"} does not compare
* to {"NS":["6", "2", "1"]}
*
*
*
*
*
*
* For usage examples of AttributeValueList and ComparisonOperator, see Legacy
* Conditional Parameters in the Amazon DynamoDB Developer Guide.
*
*
* For backward compatibility with previous DynamoDB releases, the following parameters can be used instead of
* AttributeValueList and ComparisonOperator:
*
*
* -
*
* Value - A value for DynamoDB to compare with an attribute.
*
*
* -
*
* Exists - A Boolean value that causes DynamoDB to evaluate the value before attempting the conditional
* operation:
*
*
* -
*
* If Exists is true, DynamoDB will check to see if that attribute value already exists in the
* table. If it is found, then the condition evaluates to true; otherwise the condition evaluate to false.
*
*
* -
*
* If Exists is false, DynamoDB assumes that the attribute value does not exist in the
* table. If in fact the value does not exist, then the assumption is valid and the condition evaluates to true. If
* the value is found, despite the assumption that it does not exist, the condition evaluates to false.
*
*
*
*
* Note that the default value for Exists is true.
*
*
*
*
* The Value and Exists parameters are incompatible with AttributeValueList and
* ComparisonOperator. Note that if you use both sets of parameters at once, DynamoDB will return a
* ValidationException exception.
*
*/
private java.util.Map expected;
/**
*
* Use ReturnValues if you want to get the item attributes as they appeared before they were updated with the
* PutItem request. For PutItem, the valid values are:
*
*
* -
*
* NONE - If ReturnValues is not specified, or if its value is NONE, then nothing
* is returned. (This setting is the default for ReturnValues.)
*
*
* -
*
* ALL_OLD - If PutItem overwrote an attribute name-value pair, then the content of the old item
* is returned.
*
*
*
*
*
* The ReturnValues parameter is used by several DynamoDB operations; however, PutItem does not
* recognize any values other than NONE or ALL_OLD.
*
*
*/
private String returnValues;
private String returnConsumedCapacity;
/**
*
* Determines whether item collection metrics are returned. If set to SIZE, the response includes
* statistics about item collections, if any, that were modified during the operation are returned in the response.
* If set to NONE (the default), no statistics are returned.
*
*/
private String returnItemCollectionMetrics;
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression
* instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB
* will return a ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in the Expected map:
*
*
* -
*
* AND - If all of the conditions evaluate to true, then the entire map evaluates to true.
*
*
* -
*
* OR - If at least one of the conditions evaluate to true, then the entire map evaluates to true.
*
*
*
*
* If you omit ConditionalOperator, then AND is the default.
*
*
* The operation will succeed only if the entire map evaluates to true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
*
*/
private String conditionalOperator;
/**
*
* A condition that must be satisfied in order for a conditional PutItem operation to succeed.
*
*
* An expression can contain any of the following:
*
*
* -
*
* Functions: attribute_exists | attribute_not_exists | attribute_type | contains | begins_with | size
*
*
* These function names are case-sensitive.
*
*
* -
*
* Comparison operators:
* = | <> | < | > | <= | >= | BETWEEN | IN
*
*
* -
*
* Logical operators: AND | OR | NOT
*
*
*
*
* For more information on condition expressions, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
*
*
*
* ConditionExpression replaces the legacy ConditionalOperator and Expected parameters.
*
*
*/
private String conditionExpression;
/**
*
* One or more substitution tokens for attribute names in an expression. The following are some use cases for using
* ExpressionAttributeNames:
*
*
* -
*
* To access an attribute whose name conflicts with a DynamoDB reserved word.
*
*
* -
*
* To create a placeholder for repeating occurrences of an attribute name in an expression.
*
*
* -
*
* To prevent special characters in an attribute name from being misinterpreted in an expression.
*
*
*
*
* Use the # character in an expression to dereference an attribute name. For example, consider the following
* attribute name:
*
*
* -
*
* Percentile
*
*
*
*
* The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For
* the complete list of reserved words, see Reserved Words in
* the Amazon DynamoDB Developer Guide). To work around this, you could specify the following for
* ExpressionAttributeNames:
*
*
* -
*
* {"#P":"Percentile"}
*
*
*
*
* You could then use this substitution in an expression, as in this example:
*
*
* -
*
* #P = :val
*
*
*
*
*
* Tokens that begin with the : character are expression attribute values, which are placeholders for
* the actual value at runtime.
*
*
*
* For more information on expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer Guide.
*
*/
private java.util.Map expressionAttributeNames;
/**
*
* One or more values that can be substituted in an expression.
*
*
* Use the : (colon) character in an expression to dereference an attribute value. For example, suppose that
* you wanted to check whether the value of the ProductStatus attribute was one of the following:
*
*
* Available | Backordered | Discontinued
*
*
* You would first need to specify ExpressionAttributeValues as follows:
*
*
* { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
*
*
* You could then use these values in an expression, such as this:
*
*
* ProductStatus IN (:avail, :back, :disc)
*
*
* For more information on expression attribute values, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
*
*/
private java.util.Map expressionAttributeValues;
/**
* Default constructor for PutItemRequest object. Callers should use the setter or fluent setter (with...) methods
* to initialize the object after creating it.
*/
public PutItemRequest() {
}
/**
* Constructs a new PutItemRequest object. Callers should use the setter or fluent setter (with...) methods to
* initialize any additional object members.
*
* @param tableName
* The name of the table to contain the item.
* @param item
* A map of attribute name/value pairs, one for each attribute. Only the primary key attributes are required;
* you can optionally provide other attribute name-value pairs for the item.
*
* You must provide all of the attributes for the primary key. For example, with a simple primary key, you
* only need to provide a value for the partition key. For a composite primary key, you must provide both
* values for both the partition key and the sort key.
*
*
* If you specify any attributes that are part of an index key, then the data types for those attributes must
* match those of the schema in the table's attribute definition.
*
*
* For more information about primary keys, see Primary Key in the Amazon DynamoDB Developer Guide.
*
*
* Each element in the Item map is an AttributeValue object.
*/
public PutItemRequest(String tableName, java.util.Map item) {
setTableName(tableName);
setItem(item);
}
/**
* Constructs a new PutItemRequest object. Callers should use the setter or fluent setter (with...) methods to
* initialize any additional object members.
*
* @param tableName
* The name of the table to contain the item.
* @param item
* A map of attribute name/value pairs, one for each attribute. Only the primary key attributes are required;
* you can optionally provide other attribute name-value pairs for the item.
*
* You must provide all of the attributes for the primary key. For example, with a simple primary key, you
* only need to provide a value for the partition key. For a composite primary key, you must provide both
* values for both the partition key and the sort key.
*
*
* If you specify any attributes that are part of an index key, then the data types for those attributes must
* match those of the schema in the table's attribute definition.
*
*
* For more information about primary keys, see Primary Key in the Amazon DynamoDB Developer Guide.
*
*
* Each element in the Item map is an AttributeValue object.
* @param returnValues
* Use ReturnValues if you want to get the item attributes as they appeared before they were updated
* with the PutItem request. For PutItem, the valid values are:
*
*
* -
*
* NONE - If ReturnValues is not specified, or if its value is NONE, then
* nothing is returned. (This setting is the default for ReturnValues.)
*
*
* -
*
* ALL_OLD - If PutItem overwrote an attribute name-value pair, then the content of the
* old item is returned.
*
*
*
*
*
* The ReturnValues parameter is used by several DynamoDB operations; however, PutItem does not
* recognize any values other than NONE or ALL_OLD.
*
*/
public PutItemRequest(String tableName, java.util.Map item, String returnValues) {
setTableName(tableName);
setItem(item);
setReturnValues(returnValues);
}
/**
* Constructs a new PutItemRequest object. Callers should use the setter or fluent setter (with...) methods to
* initialize any additional object members.
*
* @param tableName
* The name of the table to contain the item.
* @param item
* A map of attribute name/value pairs, one for each attribute. Only the primary key attributes are required;
* you can optionally provide other attribute name-value pairs for the item.
*
* You must provide all of the attributes for the primary key. For example, with a simple primary key, you
* only need to provide a value for the partition key. For a composite primary key, you must provide both
* values for both the partition key and the sort key.
*
*
* If you specify any attributes that are part of an index key, then the data types for those attributes must
* match those of the schema in the table's attribute definition.
*
*
* For more information about primary keys, see Primary Key in the Amazon DynamoDB Developer Guide.
*
*
* Each element in the Item map is an AttributeValue object.
* @param returnValues
* Use ReturnValues if you want to get the item attributes as they appeared before they were updated
* with the PutItem request. For PutItem, the valid values are:
*
*
* -
*
* NONE - If ReturnValues is not specified, or if its value is NONE, then
* nothing is returned. (This setting is the default for ReturnValues.)
*
*
* -
*
* ALL_OLD - If PutItem overwrote an attribute name-value pair, then the content of the
* old item is returned.
*
*
*
*
*
* The ReturnValues parameter is used by several DynamoDB operations; however, PutItem does not
* recognize any values other than NONE or ALL_OLD.
*
*/
public PutItemRequest(String tableName, java.util.Map item, ReturnValue returnValues) {
setTableName(tableName);
setItem(item);
setReturnValues(returnValues.toString());
}
/**
*
* The name of the table to contain the item.
*
*
* @param tableName
* The name of the table to contain the item.
*/
public void setTableName(String tableName) {
this.tableName = tableName;
}
/**
*
* The name of the table to contain the item.
*
*
* @return The name of the table to contain the item.
*/
public String getTableName() {
return this.tableName;
}
/**
*
* The name of the table to contain the item.
*
*
* @param tableName
* The name of the table to contain the item.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public PutItemRequest withTableName(String tableName) {
setTableName(tableName);
return this;
}
/**
*
* A map of attribute name/value pairs, one for each attribute. Only the primary key attributes are required; you
* can optionally provide other attribute name-value pairs for the item.
*
*
* You must provide all of the attributes for the primary key. For example, with a simple primary key, you only need
* to provide a value for the partition key. For a composite primary key, you must provide both values for both the
* partition key and the sort key.
*
*
* If you specify any attributes that are part of an index key, then the data types for those attributes must match
* those of the schema in the table's attribute definition.
*
*
* For more information about primary keys, see Primary
* Key in the Amazon DynamoDB Developer Guide.
*
*
* Each element in the Item map is an AttributeValue object.
*
*
* @return A map of attribute name/value pairs, one for each attribute. Only the primary key attributes are
* required; you can optionally provide other attribute name-value pairs for the item.
*
* You must provide all of the attributes for the primary key. For example, with a simple primary key, you
* only need to provide a value for the partition key. For a composite primary key, you must provide both
* values for both the partition key and the sort key.
*
*
* If you specify any attributes that are part of an index key, then the data types for those attributes
* must match those of the schema in the table's attribute definition.
*
*
* For more information about primary keys, see Primary Key in the Amazon DynamoDB Developer Guide.
*
*
* Each element in the Item map is an AttributeValue object.
*/
public java.util.Map getItem() {
return item;
}
/**
*
* A map of attribute name/value pairs, one for each attribute. Only the primary key attributes are required; you
* can optionally provide other attribute name-value pairs for the item.
*
*
* You must provide all of the attributes for the primary key. For example, with a simple primary key, you only need
* to provide a value for the partition key. For a composite primary key, you must provide both values for both the
* partition key and the sort key.
*
*
* If you specify any attributes that are part of an index key, then the data types for those attributes must match
* those of the schema in the table's attribute definition.
*
*
* For more information about primary keys, see Primary
* Key in the Amazon DynamoDB Developer Guide.
*
*
* Each element in the Item map is an AttributeValue object.
*
*
* @param item
* A map of attribute name/value pairs, one for each attribute. Only the primary key attributes are required;
* you can optionally provide other attribute name-value pairs for the item.
*
* You must provide all of the attributes for the primary key. For example, with a simple primary key, you
* only need to provide a value for the partition key. For a composite primary key, you must provide both
* values for both the partition key and the sort key.
*
*
* If you specify any attributes that are part of an index key, then the data types for those attributes must
* match those of the schema in the table's attribute definition.
*
*
* For more information about primary keys, see Primary Key in the Amazon DynamoDB Developer Guide.
*
*
* Each element in the Item map is an AttributeValue object.
*/
public void setItem(java.util.Map item) {
this.item = item;
}
/**
*
* A map of attribute name/value pairs, one for each attribute. Only the primary key attributes are required; you
* can optionally provide other attribute name-value pairs for the item.
*
*
* You must provide all of the attributes for the primary key. For example, with a simple primary key, you only need
* to provide a value for the partition key. For a composite primary key, you must provide both values for both the
* partition key and the sort key.
*
*
* If you specify any attributes that are part of an index key, then the data types for those attributes must match
* those of the schema in the table's attribute definition.
*
*
* For more information about primary keys, see Primary
* Key in the Amazon DynamoDB Developer Guide.
*
*
* Each element in the Item map is an AttributeValue object.
*
*
* @param item
* A map of attribute name/value pairs, one for each attribute. Only the primary key attributes are required;
* you can optionally provide other attribute name-value pairs for the item.
*
* You must provide all of the attributes for the primary key. For example, with a simple primary key, you
* only need to provide a value for the partition key. For a composite primary key, you must provide both
* values for both the partition key and the sort key.
*
*
* If you specify any attributes that are part of an index key, then the data types for those attributes must
* match those of the schema in the table's attribute definition.
*
*
* For more information about primary keys, see Primary Key in the Amazon DynamoDB Developer Guide.
*
*
* Each element in the Item map is an AttributeValue object.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public PutItemRequest withItem(java.util.Map item) {
setItem(item);
return this;
}
public PutItemRequest addItemEntry(String key, AttributeValue value) {
if (null == this.item) {
this.item = new java.util.HashMap();
}
if (this.item.containsKey(key))
throw new IllegalArgumentException("Duplicated keys (" + key.toString() + ") are provided.");
this.item.put(key, value);
return this;
}
/**
* Removes all the entries added into Item. <p> Returns a reference to this object so that method calls can be
* chained together.
*/
public PutItemRequest clearItemEntries() {
this.item = null;
return this;
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression
* instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB
* will return a ValidationException exception.
*
*
*
* A map of attribute/condition pairs. Expected provides a conditional block for the PutItem
* operation.
*
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* Each element of Expected consists of an attribute name, a comparison operator, and one or more values.
* DynamoDB compares the attribute with the value(s) you supplied, using the comparison operator. For each
* Expected element, the result of the evaluation is either true or false.
*
*
* If you specify more than one element in the Expected map, then by default all of the conditions must
* evaluate to true. In other words, the conditions are ANDed together. (You can use the ConditionalOperator
* parameter to OR the conditions instead. If you do this, then at least one of the conditions must evaluate to
* true, rather than all of them.)
*
*
* If the Expected map evaluates to true, then the conditional operation succeeds; otherwise, it fails.
*
*
* Expected contains the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate against the supplied attribute. The number of values
* in the list depends on the ComparisonOperator being used.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than are based on ASCII character code values. For
* example, a is greater than A, and a is greater than B. For a
* list of code values, see http://en.wikipedia
* .org/wiki/ASCII#ASCII_printable_characters.
*
*
* For type Binary, DynamoDB treats each byte of the binary data as unsigned when it compares binary values.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating attributes in the AttributeValueList. When
* performing the comparison, DynamoDB uses strongly consistent reads.
*
*
* The following comparison operators are available:
*
*
* EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN
*
*
* The following are descriptions of each comparison operator.
*
*
* -
*
* EQ : Equal. EQ is supported for all datatypes, including lists and maps.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, Binary,
* String Set, Number Set, or Binary Set. If an item contains an AttributeValue element of a different type
* than the one provided in the request, the value does not match. For example, {"S":"6"} does not
* equal {"N":"6"}. Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
*
*
* -
*
* NE : Not equal. NE is supported for all datatypes, including lists and maps.
*
*
* AttributeValueList can contain only one AttributeValue of type String, Number, Binary, String Set,
* Number Set, or Binary Set. If an item contains an AttributeValue of a different type than the one provided
* in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
*
*
* -
*
* LE : Less than or equal.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue element of a different type than the one provided
* in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to {"NS":["6", "2", "1"]}.
*
*
* -
*
* LT : Less than.
*
*
* AttributeValueList can contain only one AttributeValue of type String, Number, or Binary (not a set
* type). If an item contains an AttributeValue element of a different type than the one provided in the
* request, the value does not match. For example, {"S":"6"} does not equal {"N":"6"}.
* Also, {"N":"6"} does not compare to {"NS":["6", "2", "1"]}.
*
*
* -
*
* GE : Greater than or equal.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue element of a different type than the one provided
* in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to {"NS":["6", "2", "1"]}.
*
*
* -
*
* GT : Greater than.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue element of a different type than the one provided
* in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to {"NS":["6", "2", "1"]}.
*
*
* -
*
* NOT_NULL : The attribute exists. NOT_NULL is supported for all datatypes, including
* lists and maps.
*
*
*
* This operator tests for the existence of an attribute, not its data type. If the data type of attribute "
* a" is null, and you evaluate it using NOT_NULL, the result is a Boolean true.
* This result is because the attribute "a" exists; its data type is not relevant to the
* NOT_NULL comparison operator.
*
*
* -
*
* NULL : The attribute does not exist. NULL is supported for all datatypes, including
* lists and maps.
*
*
*
* This operator tests for the nonexistence of an attribute, not its data type. If the data type of attribute "
* a" is null, and you evaluate it using NULL, the result is a Boolean false. This
* is because the attribute "a" exists; its data type is not relevant to the NULL
* comparison operator.
*
*
* -
*
* CONTAINS : Checks for a subsequence, or value in a set.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or Binary
* (not a set type). If the target attribute of the comparison is of type String, then the operator checks for a
* substring match. If the target attribute of the comparison is of type Binary, then the operator looks for a
* subsequence of the target that matches the input. If the target attribute of the comparison is a set ("
* SS", "NS", or "BS"), then the operator evaluates to true if it finds an
* exact match with any member of the set.
*
*
* CONTAINS is supported for lists: When evaluating "a CONTAINS b", "a
* " can be a list; however, "b" cannot be a set, a map, or a list.
*
*
* -
*
* NOT_CONTAINS : Checks for absence of a subsequence, or absence of a value in a set.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or Binary
* (not a set type). If the target attribute of the comparison is a String, then the operator checks for the absence
* of a substring match. If the target attribute of the comparison is Binary, then the operator checks for the
* absence of a subsequence of the target that matches the input. If the target attribute of the comparison is a set
* ("SS", "NS", or "BS"), then the operator evaluates to true if it does
* not find an exact match with any member of the set.
*
*
* NOT_CONTAINS is supported for lists: When evaluating "a NOT CONTAINS b", "a
* " can be a list; however, "b" cannot be a set, a map, or a list.
*
*
* -
*
* BEGINS_WITH : Checks for a prefix.
*
*
* AttributeValueList can contain only one AttributeValue of type String or Binary (not a Number or a
* set type). The target attribute of the comparison must be of type String or Binary (not a Number or a set type).
*
*
* -
*
* IN : Checks for matching elements within two sets.
*
*
* AttributeValueList can contain one or more AttributeValue elements of type String, Number, or
* Binary (not a set type). These attributes are compared against an existing set type attribute of an item. If any
* elements of the input set are present in the item attribute, the expression evaluates to true.
*
*
* -
*
* BETWEEN : Greater than or equal to the first value, and less than or equal to the second value.
*
*
* AttributeValueList must contain two AttributeValue elements of the same type, either String,
* Number, or Binary (not a set type). A target attribute matches if the target value is greater than, or equal to,
* the first element and less than, or equal to, the second element. If an item contains an AttributeValue
* element of a different type than the one provided in the request, the value does not match. For example,
* {"S":"6"} does not compare to {"N":"6"}. Also, {"N":"6"} does not compare
* to {"NS":["6", "2", "1"]}
*
*
*
*
*
*
* For usage examples of AttributeValueList and ComparisonOperator, see Legacy
* Conditional Parameters in the Amazon DynamoDB Developer Guide.
*
*
* For backward compatibility with previous DynamoDB releases, the following parameters can be used instead of
* AttributeValueList and ComparisonOperator:
*
*
* -
*
* Value - A value for DynamoDB to compare with an attribute.
*
*
* -
*
* Exists - A Boolean value that causes DynamoDB to evaluate the value before attempting the conditional
* operation:
*
*
* -
*
* If Exists is true, DynamoDB will check to see if that attribute value already exists in the
* table. If it is found, then the condition evaluates to true; otherwise the condition evaluate to false.
*
*
* -
*
* If Exists is false, DynamoDB assumes that the attribute value does not exist in the
* table. If in fact the value does not exist, then the assumption is valid and the condition evaluates to true. If
* the value is found, despite the assumption that it does not exist, the condition evaluates to false.
*
*
*
*
* Note that the default value for Exists is true.
*
*
*
*
* The Value and Exists parameters are incompatible with AttributeValueList and
* ComparisonOperator. Note that if you use both sets of parameters at once, DynamoDB will return a
* ValidationException exception.
*
*
* @return
* This is a legacy parameter, for backward compatibility. New applications should use
* ConditionExpression instead. Do not combine legacy parameters and expression parameters in a
* single API call; otherwise, DynamoDB will return a ValidationException exception.
*
*
*
* A map of attribute/condition pairs. Expected provides a conditional block for the PutItem
* operation.
*
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* Each element of Expected consists of an attribute name, a comparison operator, and one or more
* values. DynamoDB compares the attribute with the value(s) you supplied, using the comparison operator.
* For each Expected element, the result of the evaluation is either true or false.
*
*
* If you specify more than one element in the Expected map, then by default all of the conditions
* must evaluate to true. In other words, the conditions are ANDed together. (You can use the
* ConditionalOperator parameter to OR the conditions instead. If you do this, then at least one of
* the conditions must evaluate to true, rather than all of them.)
*
*
* If the Expected map evaluates to true, then the conditional operation succeeds; otherwise, it
* fails.
*
*
* Expected contains the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate against the supplied attribute. The number of
* values in the list depends on the ComparisonOperator being used.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than are based on ASCII character code values.
* For example, a is greater than A, and a is greater than
* B. For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
*
*
* For type Binary, DynamoDB treats each byte of the binary data as unsigned when it compares binary values.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating attributes in the AttributeValueList. When
* performing the comparison, DynamoDB uses strongly consistent reads.
*
*
* The following comparison operators are available:
*
*
* EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN
*
*
* The following are descriptions of each comparison operator.
*
*
* -
*
* EQ : Equal. EQ is supported for all datatypes, including lists and maps.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number,
* Binary, String Set, Number Set, or Binary Set. If an item contains an AttributeValue element of a
* different type than the one provided in the request, the value does not match. For example,
* {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"} does not equal
* {"NS":["6", "2", "1"]}.
*
*
* -
*
* NE : Not equal. NE is supported for all datatypes, including lists and maps.
*
*
* AttributeValueList can contain only one AttributeValue of type String, Number, Binary,
* String Set, Number Set, or Binary Set. If an item contains an AttributeValue of a different type
* than the one provided in the request, the value does not match. For example, {"S":"6"} does
* not equal {"N":"6"}. Also, {"N":"6"} does not equal
* {"NS":["6", "2", "1"]}.
*
*
* -
*
* LE : Less than or equal.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or
* Binary (not a set type). If an item contains an AttributeValue element of a different type than
* the one provided in the request, the value does not match. For example, {"S":"6"} does not
* equal {"N":"6"}. Also, {"N":"6"} does not compare to
* {"NS":["6", "2", "1"]}.
*
*
* -
*
* LT : Less than.
*
*
* AttributeValueList can contain only one AttributeValue of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue element of a different type than the one
* provided in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to
* {"NS":["6", "2", "1"]}.
*
*
* -
*
* GE : Greater than or equal.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or
* Binary (not a set type). If an item contains an AttributeValue element of a different type than
* the one provided in the request, the value does not match. For example, {"S":"6"} does not
* equal {"N":"6"}. Also, {"N":"6"} does not compare to
* {"NS":["6", "2", "1"]}.
*
*
* -
*
* GT : Greater than.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or
* Binary (not a set type). If an item contains an AttributeValue element of a different type than
* the one provided in the request, the value does not match. For example, {"S":"6"} does not
* equal {"N":"6"}. Also, {"N":"6"} does not compare to
* {"NS":["6", "2", "1"]}.
*
*
* -
*
* NOT_NULL : The attribute exists. NOT_NULL is supported for all datatypes,
* including lists and maps.
*
*
*
* This operator tests for the existence of an attribute, not its data type. If the data type of attribute "
* a" is null, and you evaluate it using NOT_NULL, the result is a Boolean
* true. This result is because the attribute "a" exists; its data type is not relevant
* to the NOT_NULL comparison operator.
*
*
* -
*
* NULL : The attribute does not exist. NULL is supported for all datatypes,
* including lists and maps.
*
*
*
* This operator tests for the nonexistence of an attribute, not its data type. If the data type of
* attribute "a" is null, and you evaluate it using NULL, the result is a Boolean
* false. This is because the attribute "a" exists; its data type is not relevant to the
* NULL comparison operator.
*
*
* -
*
* CONTAINS : Checks for a subsequence, or value in a set.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or
* Binary (not a set type). If the target attribute of the comparison is of type String, then the operator
* checks for a substring match. If the target attribute of the comparison is of type Binary, then the
* operator looks for a subsequence of the target that matches the input. If the target attribute of the
* comparison is a set ("SS", "NS", or "BS"), then the operator
* evaluates to true if it finds an exact match with any member of the set.
*
*
* CONTAINS is supported for lists: When evaluating "a CONTAINS b", "a
* " can be a list; however, "b" cannot be a set, a map, or a list.
*
*
* -
*
* NOT_CONTAINS : Checks for absence of a subsequence, or absence of a value in a set.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or
* Binary (not a set type). If the target attribute of the comparison is a String, then the operator checks
* for the absence of a substring match. If the target attribute of the comparison is Binary, then the
* operator checks for the absence of a subsequence of the target that matches the input. If the target
* attribute of the comparison is a set ("SS", "NS", or "BS"), then
* the operator evaluates to true if it does not find an exact match with any member of the set.
*
*
* NOT_CONTAINS is supported for lists: When evaluating "a NOT CONTAINS b", "a
* " can be a list; however, "b" cannot be a set, a map, or a list.
*
*
* -
*
* BEGINS_WITH : Checks for a prefix.
*
*
* AttributeValueList can contain only one AttributeValue of type String or Binary (not a
* Number or a set type). The target attribute of the comparison must be of type String or Binary (not a
* Number or a set type).
*
*
* -
*
* IN : Checks for matching elements within two sets.
*
*
* AttributeValueList can contain one or more AttributeValue elements of type String, Number,
* or Binary (not a set type). These attributes are compared against an existing set type attribute of an
* item. If any elements of the input set are present in the item attribute, the expression evaluates to
* true.
*
*
* -
*
* BETWEEN : Greater than or equal to the first value, and less than or equal to the second
* value.
*
*
* AttributeValueList must contain two AttributeValue elements of the same type, either
* String, Number, or Binary (not a set type). A target attribute matches if the target value is greater
* than, or equal to, the first element and less than, or equal to, the second element. If an item contains
* an AttributeValue element of a different type than the one provided in the request, the value does
* not match. For example, {"S":"6"} does not compare to {"N":"6"}. Also,
* {"N":"6"} does not compare to {"NS":["6", "2", "1"]}
*
*
*
*
*
*
* For usage examples of AttributeValueList and ComparisonOperator, see Legacy Conditional Parameters in the Amazon DynamoDB Developer Guide.
*
*
* For backward compatibility with previous DynamoDB releases, the following parameters can be used instead
* of AttributeValueList and ComparisonOperator:
*
*
* -
*
* Value - A value for DynamoDB to compare with an attribute.
*
*
* -
*
* Exists - A Boolean value that causes DynamoDB to evaluate the value before attempting the
* conditional operation:
*
*
* -
*
* If Exists is true, DynamoDB will check to see if that attribute value already exists
* in the table. If it is found, then the condition evaluates to true; otherwise the condition evaluate to
* false.
*
*
* -
*
* If Exists is false, DynamoDB assumes that the attribute value does not exist
* in the table. If in fact the value does not exist, then the assumption is valid and the condition
* evaluates to true. If the value is found, despite the assumption that it does not exist, the condition
* evaluates to false.
*
*
*
*
* Note that the default value for Exists is true.
*
*
*
*
* The Value and Exists parameters are incompatible with AttributeValueList and
* ComparisonOperator. Note that if you use both sets of parameters at once, DynamoDB will return a
* ValidationException exception.
*/
public java.util.Map getExpected() {
return expected;
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression
* instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB
* will return a ValidationException exception.
*
*
*
* A map of attribute/condition pairs. Expected provides a conditional block for the PutItem
* operation.
*
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* Each element of Expected consists of an attribute name, a comparison operator, and one or more values.
* DynamoDB compares the attribute with the value(s) you supplied, using the comparison operator. For each
* Expected element, the result of the evaluation is either true or false.
*
*
* If you specify more than one element in the Expected map, then by default all of the conditions must
* evaluate to true. In other words, the conditions are ANDed together. (You can use the ConditionalOperator
* parameter to OR the conditions instead. If you do this, then at least one of the conditions must evaluate to
* true, rather than all of them.)
*
*
* If the Expected map evaluates to true, then the conditional operation succeeds; otherwise, it fails.
*
*
* Expected contains the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate against the supplied attribute. The number of values
* in the list depends on the ComparisonOperator being used.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than are based on ASCII character code values. For
* example, a is greater than A, and a is greater than B. For a
* list of code values, see http://en.wikipedia
* .org/wiki/ASCII#ASCII_printable_characters.
*
*
* For type Binary, DynamoDB treats each byte of the binary data as unsigned when it compares binary values.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating attributes in the AttributeValueList. When
* performing the comparison, DynamoDB uses strongly consistent reads.
*
*
* The following comparison operators are available:
*
*
* EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN
*
*
* The following are descriptions of each comparison operator.
*
*
* -
*
* EQ : Equal. EQ is supported for all datatypes, including lists and maps.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, Binary,
* String Set, Number Set, or Binary Set. If an item contains an AttributeValue element of a different type
* than the one provided in the request, the value does not match. For example, {"S":"6"} does not
* equal {"N":"6"}. Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
*
*
* -
*
* NE : Not equal. NE is supported for all datatypes, including lists and maps.
*
*
* AttributeValueList can contain only one AttributeValue of type String, Number, Binary, String Set,
* Number Set, or Binary Set. If an item contains an AttributeValue of a different type than the one provided
* in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
*
*
* -
*
* LE : Less than or equal.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue element of a different type than the one provided
* in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to {"NS":["6", "2", "1"]}.
*
*
* -
*
* LT : Less than.
*
*
* AttributeValueList can contain only one AttributeValue of type String, Number, or Binary (not a set
* type). If an item contains an AttributeValue element of a different type than the one provided in the
* request, the value does not match. For example, {"S":"6"} does not equal {"N":"6"}.
* Also, {"N":"6"} does not compare to {"NS":["6", "2", "1"]}.
*
*
* -
*
* GE : Greater than or equal.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue element of a different type than the one provided
* in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to {"NS":["6", "2", "1"]}.
*
*
* -
*
* GT : Greater than.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue element of a different type than the one provided
* in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to {"NS":["6", "2", "1"]}.
*
*
* -
*
* NOT_NULL : The attribute exists. NOT_NULL is supported for all datatypes, including
* lists and maps.
*
*
*
* This operator tests for the existence of an attribute, not its data type. If the data type of attribute "
* a" is null, and you evaluate it using NOT_NULL, the result is a Boolean true.
* This result is because the attribute "a" exists; its data type is not relevant to the
* NOT_NULL comparison operator.
*
*
* -
*
* NULL : The attribute does not exist. NULL is supported for all datatypes, including
* lists and maps.
*
*
*
* This operator tests for the nonexistence of an attribute, not its data type. If the data type of attribute "
* a" is null, and you evaluate it using NULL, the result is a Boolean false. This
* is because the attribute "a" exists; its data type is not relevant to the NULL
* comparison operator.
*
*
* -
*
* CONTAINS : Checks for a subsequence, or value in a set.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or Binary
* (not a set type). If the target attribute of the comparison is of type String, then the operator checks for a
* substring match. If the target attribute of the comparison is of type Binary, then the operator looks for a
* subsequence of the target that matches the input. If the target attribute of the comparison is a set ("
* SS", "NS", or "BS"), then the operator evaluates to true if it finds an
* exact match with any member of the set.
*
*
* CONTAINS is supported for lists: When evaluating "a CONTAINS b", "a
* " can be a list; however, "b" cannot be a set, a map, or a list.
*
*
* -
*
* NOT_CONTAINS : Checks for absence of a subsequence, or absence of a value in a set.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or Binary
* (not a set type). If the target attribute of the comparison is a String, then the operator checks for the absence
* of a substring match. If the target attribute of the comparison is Binary, then the operator checks for the
* absence of a subsequence of the target that matches the input. If the target attribute of the comparison is a set
* ("SS", "NS", or "BS"), then the operator evaluates to true if it does
* not find an exact match with any member of the set.
*
*
* NOT_CONTAINS is supported for lists: When evaluating "a NOT CONTAINS b", "a
* " can be a list; however, "b" cannot be a set, a map, or a list.
*
*
* -
*
* BEGINS_WITH : Checks for a prefix.
*
*
* AttributeValueList can contain only one AttributeValue of type String or Binary (not a Number or a
* set type). The target attribute of the comparison must be of type String or Binary (not a Number or a set type).
*
*
* -
*
* IN : Checks for matching elements within two sets.
*
*
* AttributeValueList can contain one or more AttributeValue elements of type String, Number, or
* Binary (not a set type). These attributes are compared against an existing set type attribute of an item. If any
* elements of the input set are present in the item attribute, the expression evaluates to true.
*
*
* -
*
* BETWEEN : Greater than or equal to the first value, and less than or equal to the second value.
*
*
* AttributeValueList must contain two AttributeValue elements of the same type, either String,
* Number, or Binary (not a set type). A target attribute matches if the target value is greater than, or equal to,
* the first element and less than, or equal to, the second element. If an item contains an AttributeValue
* element of a different type than the one provided in the request, the value does not match. For example,
* {"S":"6"} does not compare to {"N":"6"}. Also, {"N":"6"} does not compare
* to {"NS":["6", "2", "1"]}
*
*
*
*
*
*
* For usage examples of AttributeValueList and ComparisonOperator, see Legacy
* Conditional Parameters in the Amazon DynamoDB Developer Guide.
*
*
* For backward compatibility with previous DynamoDB releases, the following parameters can be used instead of
* AttributeValueList and ComparisonOperator:
*
*
* -
*
* Value - A value for DynamoDB to compare with an attribute.
*
*
* -
*
* Exists - A Boolean value that causes DynamoDB to evaluate the value before attempting the conditional
* operation:
*
*
* -
*
* If Exists is true, DynamoDB will check to see if that attribute value already exists in the
* table. If it is found, then the condition evaluates to true; otherwise the condition evaluate to false.
*
*
* -
*
* If Exists is false, DynamoDB assumes that the attribute value does not exist in the
* table. If in fact the value does not exist, then the assumption is valid and the condition evaluates to true. If
* the value is found, despite the assumption that it does not exist, the condition evaluates to false.
*
*
*
*
* Note that the default value for Exists is true.
*
*
*
*
* The Value and Exists parameters are incompatible with AttributeValueList and
* ComparisonOperator. Note that if you use both sets of parameters at once, DynamoDB will return a
* ValidationException exception.
*
*
* @param expected
*
* This is a legacy parameter, for backward compatibility. New applications should use
* ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single
* API call; otherwise, DynamoDB will return a ValidationException exception.
*
*
*
* A map of attribute/condition pairs. Expected provides a conditional block for the PutItem
* operation.
*
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* Each element of Expected consists of an attribute name, a comparison operator, and one or more
* values. DynamoDB compares the attribute with the value(s) you supplied, using the comparison operator. For
* each Expected element, the result of the evaluation is either true or false.
*
*
* If you specify more than one element in the Expected map, then by default all of the conditions
* must evaluate to true. In other words, the conditions are ANDed together. (You can use the
* ConditionalOperator parameter to OR the conditions instead. If you do this, then at least one of
* the conditions must evaluate to true, rather than all of them.)
*
*
* If the Expected map evaluates to true, then the conditional operation succeeds; otherwise, it
* fails.
*
*
* Expected contains the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate against the supplied attribute. The number of
* values in the list depends on the ComparisonOperator being used.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than are based on ASCII character code values.
* For example, a is greater than A, and a is greater than
* B. For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
*
*
* For type Binary, DynamoDB treats each byte of the binary data as unsigned when it compares binary values.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating attributes in the AttributeValueList. When
* performing the comparison, DynamoDB uses strongly consistent reads.
*
*
* The following comparison operators are available:
*
*
* EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN
*
*
* The following are descriptions of each comparison operator.
*
*
* -
*
* EQ : Equal. EQ is supported for all datatypes, including lists and maps.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number,
* Binary, String Set, Number Set, or Binary Set. If an item contains an AttributeValue element of a
* different type than the one provided in the request, the value does not match. For example,
* {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"} does not equal
* {"NS":["6", "2", "1"]}.
*
*
* -
*
* NE : Not equal. NE is supported for all datatypes, including lists and maps.
*
*
* AttributeValueList can contain only one AttributeValue of type String, Number, Binary,
* String Set, Number Set, or Binary Set. If an item contains an AttributeValue of a different type
* than the one provided in the request, the value does not match. For example, {"S":"6"} does
* not equal {"N":"6"}. Also, {"N":"6"} does not equal
* {"NS":["6", "2", "1"]}.
*
*
* -
*
* LE : Less than or equal.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or
* Binary (not a set type). If an item contains an AttributeValue element of a different type than the
* one provided in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to
* {"NS":["6", "2", "1"]}.
*
*
* -
*
* LT : Less than.
*
*
* AttributeValueList can contain only one AttributeValue of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue element of a different type than the one
* provided in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to
* {"NS":["6", "2", "1"]}.
*
*
* -
*
* GE : Greater than or equal.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or
* Binary (not a set type). If an item contains an AttributeValue element of a different type than the
* one provided in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to
* {"NS":["6", "2", "1"]}.
*
*
* -
*
* GT : Greater than.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or
* Binary (not a set type). If an item contains an AttributeValue element of a different type than the
* one provided in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to
* {"NS":["6", "2", "1"]}.
*
*
* -
*
* NOT_NULL : The attribute exists. NOT_NULL is supported for all datatypes,
* including lists and maps.
*
*
*
* This operator tests for the existence of an attribute, not its data type. If the data type of attribute "
* a" is null, and you evaluate it using NOT_NULL, the result is a Boolean
* true. This result is because the attribute "a" exists; its data type is not relevant
* to the NOT_NULL comparison operator.
*
*
* -
*
* NULL : The attribute does not exist. NULL is supported for all datatypes,
* including lists and maps.
*
*
*
* This operator tests for the nonexistence of an attribute, not its data type. If the data type of attribute
* "a" is null, and you evaluate it using NULL, the result is a Boolean
* false. This is because the attribute "a" exists; its data type is not relevant to the
* NULL comparison operator.
*
*
* -
*
* CONTAINS : Checks for a subsequence, or value in a set.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or
* Binary (not a set type). If the target attribute of the comparison is of type String, then the operator
* checks for a substring match. If the target attribute of the comparison is of type Binary, then the
* operator looks for a subsequence of the target that matches the input. If the target attribute of the
* comparison is a set ("SS", "NS", or "BS"), then the operator
* evaluates to true if it finds an exact match with any member of the set.
*
*
* CONTAINS is supported for lists: When evaluating "a CONTAINS b", "a
* " can be a list; however, "b" cannot be a set, a map, or a list.
*
*
* -
*
* NOT_CONTAINS : Checks for absence of a subsequence, or absence of a value in a set.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or
* Binary (not a set type). If the target attribute of the comparison is a String, then the operator checks
* for the absence of a substring match. If the target attribute of the comparison is Binary, then the
* operator checks for the absence of a subsequence of the target that matches the input. If the target
* attribute of the comparison is a set ("SS", "NS", or "BS"), then
* the operator evaluates to true if it does not find an exact match with any member of the set.
*
*
* NOT_CONTAINS is supported for lists: When evaluating "a NOT CONTAINS b", "a
* " can be a list; however, "b" cannot be a set, a map, or a list.
*
*
* -
*
* BEGINS_WITH : Checks for a prefix.
*
*
* AttributeValueList can contain only one AttributeValue of type String or Binary (not a
* Number or a set type). The target attribute of the comparison must be of type String or Binary (not a
* Number or a set type).
*
*
* -
*
* IN : Checks for matching elements within two sets.
*
*
* AttributeValueList can contain one or more AttributeValue elements of type String, Number,
* or Binary (not a set type). These attributes are compared against an existing set type attribute of an
* item. If any elements of the input set are present in the item attribute, the expression evaluates to
* true.
*
*
* -
*
* BETWEEN : Greater than or equal to the first value, and less than or equal to the second
* value.
*
*
* AttributeValueList must contain two AttributeValue elements of the same type, either String,
* Number, or Binary (not a set type). A target attribute matches if the target value is greater than, or
* equal to, the first element and less than, or equal to, the second element. If an item contains an
* AttributeValue element of a different type than the one provided in the request, the value does not
* match. For example, {"S":"6"} does not compare to {"N":"6"}. Also,
* {"N":"6"} does not compare to {"NS":["6", "2", "1"]}
*
*
*
*
*
*
* For usage examples of AttributeValueList and ComparisonOperator, see Legacy Conditional Parameters in the Amazon DynamoDB Developer Guide.
*
*
* For backward compatibility with previous DynamoDB releases, the following parameters can be used instead
* of AttributeValueList and ComparisonOperator:
*
*
* -
*
* Value - A value for DynamoDB to compare with an attribute.
*
*
* -
*
* Exists - A Boolean value that causes DynamoDB to evaluate the value before attempting the
* conditional operation:
*
*
* -
*
* If Exists is true, DynamoDB will check to see if that attribute value already exists
* in the table. If it is found, then the condition evaluates to true; otherwise the condition evaluate to
* false.
*
*
* -
*
* If Exists is false, DynamoDB assumes that the attribute value does not exist in
* the table. If in fact the value does not exist, then the assumption is valid and the condition evaluates
* to true. If the value is found, despite the assumption that it does not exist, the condition evaluates to
* false.
*
*
*
*
* Note that the default value for Exists is true.
*
*
*
*
* The Value and Exists parameters are incompatible with AttributeValueList and
* ComparisonOperator. Note that if you use both sets of parameters at once, DynamoDB will return a
* ValidationException exception.
*/
public void setExpected(java.util.Map expected) {
this.expected = expected;
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression
* instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB
* will return a ValidationException exception.
*
*
*
* A map of attribute/condition pairs. Expected provides a conditional block for the PutItem
* operation.
*
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* Each element of Expected consists of an attribute name, a comparison operator, and one or more values.
* DynamoDB compares the attribute with the value(s) you supplied, using the comparison operator. For each
* Expected element, the result of the evaluation is either true or false.
*
*
* If you specify more than one element in the Expected map, then by default all of the conditions must
* evaluate to true. In other words, the conditions are ANDed together. (You can use the ConditionalOperator
* parameter to OR the conditions instead. If you do this, then at least one of the conditions must evaluate to
* true, rather than all of them.)
*
*
* If the Expected map evaluates to true, then the conditional operation succeeds; otherwise, it fails.
*
*
* Expected contains the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate against the supplied attribute. The number of values
* in the list depends on the ComparisonOperator being used.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than are based on ASCII character code values. For
* example, a is greater than A, and a is greater than B. For a
* list of code values, see http://en.wikipedia
* .org/wiki/ASCII#ASCII_printable_characters.
*
*
* For type Binary, DynamoDB treats each byte of the binary data as unsigned when it compares binary values.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating attributes in the AttributeValueList. When
* performing the comparison, DynamoDB uses strongly consistent reads.
*
*
* The following comparison operators are available:
*
*
* EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN
*
*
* The following are descriptions of each comparison operator.
*
*
* -
*
* EQ : Equal. EQ is supported for all datatypes, including lists and maps.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, Binary,
* String Set, Number Set, or Binary Set. If an item contains an AttributeValue element of a different type
* than the one provided in the request, the value does not match. For example, {"S":"6"} does not
* equal {"N":"6"}. Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
*
*
* -
*
* NE : Not equal. NE is supported for all datatypes, including lists and maps.
*
*
* AttributeValueList can contain only one AttributeValue of type String, Number, Binary, String Set,
* Number Set, or Binary Set. If an item contains an AttributeValue of a different type than the one provided
* in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
*
*
* -
*
* LE : Less than or equal.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue element of a different type than the one provided
* in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to {"NS":["6", "2", "1"]}.
*
*
* -
*
* LT : Less than.
*
*
* AttributeValueList can contain only one AttributeValue of type String, Number, or Binary (not a set
* type). If an item contains an AttributeValue element of a different type than the one provided in the
* request, the value does not match. For example, {"S":"6"} does not equal {"N":"6"}.
* Also, {"N":"6"} does not compare to {"NS":["6", "2", "1"]}.
*
*
* -
*
* GE : Greater than or equal.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue element of a different type than the one provided
* in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to {"NS":["6", "2", "1"]}.
*
*
* -
*
* GT : Greater than.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue element of a different type than the one provided
* in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to {"NS":["6", "2", "1"]}.
*
*
* -
*
* NOT_NULL : The attribute exists. NOT_NULL is supported for all datatypes, including
* lists and maps.
*
*
*
* This operator tests for the existence of an attribute, not its data type. If the data type of attribute "
* a" is null, and you evaluate it using NOT_NULL, the result is a Boolean true.
* This result is because the attribute "a" exists; its data type is not relevant to the
* NOT_NULL comparison operator.
*
*
* -
*
* NULL : The attribute does not exist. NULL is supported for all datatypes, including
* lists and maps.
*
*
*
* This operator tests for the nonexistence of an attribute, not its data type. If the data type of attribute "
* a" is null, and you evaluate it using NULL, the result is a Boolean false. This
* is because the attribute "a" exists; its data type is not relevant to the NULL
* comparison operator.
*
*
* -
*
* CONTAINS : Checks for a subsequence, or value in a set.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or Binary
* (not a set type). If the target attribute of the comparison is of type String, then the operator checks for a
* substring match. If the target attribute of the comparison is of type Binary, then the operator looks for a
* subsequence of the target that matches the input. If the target attribute of the comparison is a set ("
* SS", "NS", or "BS"), then the operator evaluates to true if it finds an
* exact match with any member of the set.
*
*
* CONTAINS is supported for lists: When evaluating "a CONTAINS b", "a
* " can be a list; however, "b" cannot be a set, a map, or a list.
*
*
* -
*
* NOT_CONTAINS : Checks for absence of a subsequence, or absence of a value in a set.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or Binary
* (not a set type). If the target attribute of the comparison is a String, then the operator checks for the absence
* of a substring match. If the target attribute of the comparison is Binary, then the operator checks for the
* absence of a subsequence of the target that matches the input. If the target attribute of the comparison is a set
* ("SS", "NS", or "BS"), then the operator evaluates to true if it does
* not find an exact match with any member of the set.
*
*
* NOT_CONTAINS is supported for lists: When evaluating "a NOT CONTAINS b", "a
* " can be a list; however, "b" cannot be a set, a map, or a list.
*
*
* -
*
* BEGINS_WITH : Checks for a prefix.
*
*
* AttributeValueList can contain only one AttributeValue of type String or Binary (not a Number or a
* set type). The target attribute of the comparison must be of type String or Binary (not a Number or a set type).
*
*
* -
*
* IN : Checks for matching elements within two sets.
*
*
* AttributeValueList can contain one or more AttributeValue elements of type String, Number, or
* Binary (not a set type). These attributes are compared against an existing set type attribute of an item. If any
* elements of the input set are present in the item attribute, the expression evaluates to true.
*
*
* -
*
* BETWEEN : Greater than or equal to the first value, and less than or equal to the second value.
*
*
* AttributeValueList must contain two AttributeValue elements of the same type, either String,
* Number, or Binary (not a set type). A target attribute matches if the target value is greater than, or equal to,
* the first element and less than, or equal to, the second element. If an item contains an AttributeValue
* element of a different type than the one provided in the request, the value does not match. For example,
* {"S":"6"} does not compare to {"N":"6"}. Also, {"N":"6"} does not compare
* to {"NS":["6", "2", "1"]}
*
*
*
*
*
*
* For usage examples of AttributeValueList and ComparisonOperator, see Legacy
* Conditional Parameters in the Amazon DynamoDB Developer Guide.
*
*
* For backward compatibility with previous DynamoDB releases, the following parameters can be used instead of
* AttributeValueList and ComparisonOperator:
*
*
* -
*
* Value - A value for DynamoDB to compare with an attribute.
*
*
* -
*
* Exists - A Boolean value that causes DynamoDB to evaluate the value before attempting the conditional
* operation:
*
*
* -
*
* If Exists is true, DynamoDB will check to see if that attribute value already exists in the
* table. If it is found, then the condition evaluates to true; otherwise the condition evaluate to false.
*
*
* -
*
* If Exists is false, DynamoDB assumes that the attribute value does not exist in the
* table. If in fact the value does not exist, then the assumption is valid and the condition evaluates to true. If
* the value is found, despite the assumption that it does not exist, the condition evaluates to false.
*
*
*
*
* Note that the default value for Exists is true.
*
*
*
*
* The Value and Exists parameters are incompatible with AttributeValueList and
* ComparisonOperator. Note that if you use both sets of parameters at once, DynamoDB will return a
* ValidationException exception.
*
*
* @param expected
*
* This is a legacy parameter, for backward compatibility. New applications should use
* ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single
* API call; otherwise, DynamoDB will return a ValidationException exception.
*
*
*
* A map of attribute/condition pairs. Expected provides a conditional block for the PutItem
* operation.
*
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* Each element of Expected consists of an attribute name, a comparison operator, and one or more
* values. DynamoDB compares the attribute with the value(s) you supplied, using the comparison operator. For
* each Expected element, the result of the evaluation is either true or false.
*
*
* If you specify more than one element in the Expected map, then by default all of the conditions
* must evaluate to true. In other words, the conditions are ANDed together. (You can use the
* ConditionalOperator parameter to OR the conditions instead. If you do this, then at least one of
* the conditions must evaluate to true, rather than all of them.)
*
*
* If the Expected map evaluates to true, then the conditional operation succeeds; otherwise, it
* fails.
*
*
* Expected contains the following:
*
*
* -
*
* AttributeValueList - One or more values to evaluate against the supplied attribute. The number of
* values in the list depends on the ComparisonOperator being used.
*
*
* For type Number, value comparisons are numeric.
*
*
* String value comparisons for greater than, equals, or less than are based on ASCII character code values.
* For example, a is greater than A, and a is greater than
* B. For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
*
*
* For type Binary, DynamoDB treats each byte of the binary data as unsigned when it compares binary values.
*
*
* -
*
* ComparisonOperator - A comparator for evaluating attributes in the AttributeValueList. When
* performing the comparison, DynamoDB uses strongly consistent reads.
*
*
* The following comparison operators are available:
*
*
* EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN
*
*
* The following are descriptions of each comparison operator.
*
*
* -
*
* EQ : Equal. EQ is supported for all datatypes, including lists and maps.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number,
* Binary, String Set, Number Set, or Binary Set. If an item contains an AttributeValue element of a
* different type than the one provided in the request, the value does not match. For example,
* {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"} does not equal
* {"NS":["6", "2", "1"]}.
*
*
* -
*
* NE : Not equal. NE is supported for all datatypes, including lists and maps.
*
*
* AttributeValueList can contain only one AttributeValue of type String, Number, Binary,
* String Set, Number Set, or Binary Set. If an item contains an AttributeValue of a different type
* than the one provided in the request, the value does not match. For example, {"S":"6"} does
* not equal {"N":"6"}. Also, {"N":"6"} does not equal
* {"NS":["6", "2", "1"]}.
*
*
* -
*
* LE : Less than or equal.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or
* Binary (not a set type). If an item contains an AttributeValue element of a different type than the
* one provided in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to
* {"NS":["6", "2", "1"]}.
*
*
* -
*
* LT : Less than.
*
*
* AttributeValueList can contain only one AttributeValue of type String, Number, or Binary
* (not a set type). If an item contains an AttributeValue element of a different type than the one
* provided in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to
* {"NS":["6", "2", "1"]}.
*
*
* -
*
* GE : Greater than or equal.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or
* Binary (not a set type). If an item contains an AttributeValue element of a different type than the
* one provided in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to
* {"NS":["6", "2", "1"]}.
*
*
* -
*
* GT : Greater than.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or
* Binary (not a set type). If an item contains an AttributeValue element of a different type than the
* one provided in the request, the value does not match. For example, {"S":"6"} does not equal
* {"N":"6"}. Also, {"N":"6"} does not compare to
* {"NS":["6", "2", "1"]}.
*
*
* -
*
* NOT_NULL : The attribute exists. NOT_NULL is supported for all datatypes,
* including lists and maps.
*
*
*
* This operator tests for the existence of an attribute, not its data type. If the data type of attribute "
* a" is null, and you evaluate it using NOT_NULL, the result is a Boolean
* true. This result is because the attribute "a" exists; its data type is not relevant
* to the NOT_NULL comparison operator.
*
*
* -
*
* NULL : The attribute does not exist. NULL is supported for all datatypes,
* including lists and maps.
*
*
*
* This operator tests for the nonexistence of an attribute, not its data type. If the data type of attribute
* "a" is null, and you evaluate it using NULL, the result is a Boolean
* false. This is because the attribute "a" exists; its data type is not relevant to the
* NULL comparison operator.
*
*
* -
*
* CONTAINS : Checks for a subsequence, or value in a set.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or
* Binary (not a set type). If the target attribute of the comparison is of type String, then the operator
* checks for a substring match. If the target attribute of the comparison is of type Binary, then the
* operator looks for a subsequence of the target that matches the input. If the target attribute of the
* comparison is a set ("SS", "NS", or "BS"), then the operator
* evaluates to true if it finds an exact match with any member of the set.
*
*
* CONTAINS is supported for lists: When evaluating "a CONTAINS b", "a
* " can be a list; however, "b" cannot be a set, a map, or a list.
*
*
* -
*
* NOT_CONTAINS : Checks for absence of a subsequence, or absence of a value in a set.
*
*
* AttributeValueList can contain only one AttributeValue element of type String, Number, or
* Binary (not a set type). If the target attribute of the comparison is a String, then the operator checks
* for the absence of a substring match. If the target attribute of the comparison is Binary, then the
* operator checks for the absence of a subsequence of the target that matches the input. If the target
* attribute of the comparison is a set ("SS", "NS", or "BS"), then
* the operator evaluates to true if it does not find an exact match with any member of the set.
*
*
* NOT_CONTAINS is supported for lists: When evaluating "a NOT CONTAINS b", "a
* " can be a list; however, "b" cannot be a set, a map, or a list.
*
*
* -
*
* BEGINS_WITH : Checks for a prefix.
*
*
* AttributeValueList can contain only one AttributeValue of type String or Binary (not a
* Number or a set type). The target attribute of the comparison must be of type String or Binary (not a
* Number or a set type).
*
*
* -
*
* IN : Checks for matching elements within two sets.
*
*
* AttributeValueList can contain one or more AttributeValue elements of type String, Number,
* or Binary (not a set type). These attributes are compared against an existing set type attribute of an
* item. If any elements of the input set are present in the item attribute, the expression evaluates to
* true.
*
*
* -
*
* BETWEEN : Greater than or equal to the first value, and less than or equal to the second
* value.
*
*
* AttributeValueList must contain two AttributeValue elements of the same type, either String,
* Number, or Binary (not a set type). A target attribute matches if the target value is greater than, or
* equal to, the first element and less than, or equal to, the second element. If an item contains an
* AttributeValue element of a different type than the one provided in the request, the value does not
* match. For example, {"S":"6"} does not compare to {"N":"6"}. Also,
* {"N":"6"} does not compare to {"NS":["6", "2", "1"]}
*
*
*
*
*
*
* For usage examples of AttributeValueList and ComparisonOperator, see Legacy Conditional Parameters in the Amazon DynamoDB Developer Guide.
*
*
* For backward compatibility with previous DynamoDB releases, the following parameters can be used instead
* of AttributeValueList and ComparisonOperator:
*
*
* -
*
* Value - A value for DynamoDB to compare with an attribute.
*
*
* -
*
* Exists - A Boolean value that causes DynamoDB to evaluate the value before attempting the
* conditional operation:
*
*
* -
*
* If Exists is true, DynamoDB will check to see if that attribute value already exists
* in the table. If it is found, then the condition evaluates to true; otherwise the condition evaluate to
* false.
*
*
* -
*
* If Exists is false, DynamoDB assumes that the attribute value does not exist in
* the table. If in fact the value does not exist, then the assumption is valid and the condition evaluates
* to true. If the value is found, despite the assumption that it does not exist, the condition evaluates to
* false.
*
*
*
*
* Note that the default value for Exists is true.
*
*
*
*
* The Value and Exists parameters are incompatible with AttributeValueList and
* ComparisonOperator. Note that if you use both sets of parameters at once, DynamoDB will return a
* ValidationException exception.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public PutItemRequest withExpected(java.util.Map expected) {
setExpected(expected);
return this;
}
public PutItemRequest addExpectedEntry(String key, ExpectedAttributeValue value) {
if (null == this.expected) {
this.expected = new java.util.HashMap();
}
if (this.expected.containsKey(key))
throw new IllegalArgumentException("Duplicated keys (" + key.toString() + ") are provided.");
this.expected.put(key, value);
return this;
}
/**
* Removes all the entries added into Expected. <p> Returns a reference to this object so that method calls can
* be chained together.
*/
public PutItemRequest clearExpectedEntries() {
this.expected = null;
return this;
}
/**
*
* Use ReturnValues if you want to get the item attributes as they appeared before they were updated with the
* PutItem request. For PutItem, the valid values are:
*
*
* -
*
* NONE - If ReturnValues is not specified, or if its value is NONE, then nothing
* is returned. (This setting is the default for ReturnValues.)
*
*
* -
*
* ALL_OLD - If PutItem overwrote an attribute name-value pair, then the content of the old item
* is returned.
*
*
*
*
*
* The ReturnValues parameter is used by several DynamoDB operations; however, PutItem does not
* recognize any values other than NONE or ALL_OLD.
*
*
*
* @param returnValues
* Use ReturnValues if you want to get the item attributes as they appeared before they were updated
* with the PutItem request. For PutItem, the valid values are:
*
* -
*
* NONE - If ReturnValues is not specified, or if its value is NONE, then
* nothing is returned. (This setting is the default for ReturnValues.)
*
*
* -
*
* ALL_OLD - If PutItem overwrote an attribute name-value pair, then the content of the
* old item is returned.
*
*
*
*
*
* The ReturnValues parameter is used by several DynamoDB operations; however, PutItem does not
* recognize any values other than NONE or ALL_OLD.
*
* @see ReturnValue
*/
public void setReturnValues(String returnValues) {
this.returnValues = returnValues;
}
/**
*
* Use ReturnValues if you want to get the item attributes as they appeared before they were updated with the
* PutItem request. For PutItem, the valid values are:
*
*
* -
*
* NONE - If ReturnValues is not specified, or if its value is NONE, then nothing
* is returned. (This setting is the default for ReturnValues.)
*
*
* -
*
* ALL_OLD - If PutItem overwrote an attribute name-value pair, then the content of the old item
* is returned.
*
*
*
*
*
* The ReturnValues parameter is used by several DynamoDB operations; however, PutItem does not
* recognize any values other than NONE or ALL_OLD.
*
*
*
* @return Use ReturnValues if you want to get the item attributes as they appeared before they were updated
* with the PutItem request. For PutItem, the valid values are:
*
* -
*
* NONE - If ReturnValues is not specified, or if its value is NONE, then
* nothing is returned. (This setting is the default for ReturnValues.)
*
*
* -
*
* ALL_OLD - If PutItem overwrote an attribute name-value pair, then the content of the
* old item is returned.
*
*
*
*
*
* The ReturnValues parameter is used by several DynamoDB operations; however, PutItem does
* not recognize any values other than NONE or ALL_OLD.
*
* @see ReturnValue
*/
public String getReturnValues() {
return this.returnValues;
}
/**
*
* Use ReturnValues if you want to get the item attributes as they appeared before they were updated with the
* PutItem request. For PutItem, the valid values are:
*
*
* -
*
* NONE - If ReturnValues is not specified, or if its value is NONE, then nothing
* is returned. (This setting is the default for ReturnValues.)
*
*
* -
*
* ALL_OLD - If PutItem overwrote an attribute name-value pair, then the content of the old item
* is returned.
*
*
*
*
*
* The ReturnValues parameter is used by several DynamoDB operations; however, PutItem does not
* recognize any values other than NONE or ALL_OLD.
*
*
*
* @param returnValues
* Use ReturnValues if you want to get the item attributes as they appeared before they were updated
* with the PutItem request. For PutItem, the valid values are:
*
* -
*
* NONE - If ReturnValues is not specified, or if its value is NONE, then
* nothing is returned. (This setting is the default for ReturnValues.)
*
*
* -
*
* ALL_OLD - If PutItem overwrote an attribute name-value pair, then the content of the
* old item is returned.
*
*
*
*
*
* The ReturnValues parameter is used by several DynamoDB operations; however, PutItem does not
* recognize any values other than NONE or ALL_OLD.
*
* @return Returns a reference to this object so that method calls can be chained together.
* @see ReturnValue
*/
public PutItemRequest withReturnValues(String returnValues) {
setReturnValues(returnValues);
return this;
}
/**
*
* Use ReturnValues if you want to get the item attributes as they appeared before they were updated with the
* PutItem request. For PutItem, the valid values are:
*
*
* -
*
* NONE - If ReturnValues is not specified, or if its value is NONE, then nothing
* is returned. (This setting is the default for ReturnValues.)
*
*
* -
*
* ALL_OLD - If PutItem overwrote an attribute name-value pair, then the content of the old item
* is returned.
*
*
*
*
*
* The ReturnValues parameter is used by several DynamoDB operations; however, PutItem does not
* recognize any values other than NONE or ALL_OLD.
*
*
*
* @param returnValues
* Use ReturnValues if you want to get the item attributes as they appeared before they were updated
* with the PutItem request. For PutItem, the valid values are:
*
* -
*
* NONE - If ReturnValues is not specified, or if its value is NONE, then
* nothing is returned. (This setting is the default for ReturnValues.)
*
*
* -
*
* ALL_OLD - If PutItem overwrote an attribute name-value pair, then the content of the
* old item is returned.
*
*
*
*
*
* The ReturnValues parameter is used by several DynamoDB operations; however, PutItem does not
* recognize any values other than NONE or ALL_OLD.
*
* @see ReturnValue
*/
public void setReturnValues(ReturnValue returnValues) {
this.returnValues = returnValues.toString();
}
/**
*
* Use ReturnValues if you want to get the item attributes as they appeared before they were updated with the
* PutItem request. For PutItem, the valid values are:
*
*
* -
*
* NONE - If ReturnValues is not specified, or if its value is NONE, then nothing
* is returned. (This setting is the default for ReturnValues.)
*
*
* -
*
* ALL_OLD - If PutItem overwrote an attribute name-value pair, then the content of the old item
* is returned.
*
*
*
*
*
* The ReturnValues parameter is used by several DynamoDB operations; however, PutItem does not
* recognize any values other than NONE or ALL_OLD.
*
*
*
* @param returnValues
* Use ReturnValues if you want to get the item attributes as they appeared before they were updated
* with the PutItem request. For PutItem, the valid values are:
*
* -
*
* NONE - If ReturnValues is not specified, or if its value is NONE, then
* nothing is returned. (This setting is the default for ReturnValues.)
*
*
* -
*
* ALL_OLD - If PutItem overwrote an attribute name-value pair, then the content of the
* old item is returned.
*
*
*
*
*
* The ReturnValues parameter is used by several DynamoDB operations; however, PutItem does not
* recognize any values other than NONE or ALL_OLD.
*
* @return Returns a reference to this object so that method calls can be chained together.
* @see ReturnValue
*/
public PutItemRequest withReturnValues(ReturnValue returnValues) {
setReturnValues(returnValues);
return this;
}
/**
* @param returnConsumedCapacity
* @see ReturnConsumedCapacity
*/
public void setReturnConsumedCapacity(String returnConsumedCapacity) {
this.returnConsumedCapacity = returnConsumedCapacity;
}
/**
* @return
* @see ReturnConsumedCapacity
*/
public String getReturnConsumedCapacity() {
return this.returnConsumedCapacity;
}
/**
* @param returnConsumedCapacity
* @return Returns a reference to this object so that method calls can be chained together.
* @see ReturnConsumedCapacity
*/
public PutItemRequest withReturnConsumedCapacity(String returnConsumedCapacity) {
setReturnConsumedCapacity(returnConsumedCapacity);
return this;
}
/**
* @param returnConsumedCapacity
* @see ReturnConsumedCapacity
*/
public void setReturnConsumedCapacity(ReturnConsumedCapacity returnConsumedCapacity) {
this.returnConsumedCapacity = returnConsumedCapacity.toString();
}
/**
* @param returnConsumedCapacity
* @return Returns a reference to this object so that method calls can be chained together.
* @see ReturnConsumedCapacity
*/
public PutItemRequest withReturnConsumedCapacity(ReturnConsumedCapacity returnConsumedCapacity) {
setReturnConsumedCapacity(returnConsumedCapacity);
return this;
}
/**
*
* Determines whether item collection metrics are returned. If set to SIZE, the response includes
* statistics about item collections, if any, that were modified during the operation are returned in the response.
* If set to NONE (the default), no statistics are returned.
*
*
* @param returnItemCollectionMetrics
* Determines whether item collection metrics are returned. If set to SIZE, the response
* includes statistics about item collections, if any, that were modified during the operation are returned
* in the response. If set to NONE (the default), no statistics are returned.
* @see ReturnItemCollectionMetrics
*/
public void setReturnItemCollectionMetrics(String returnItemCollectionMetrics) {
this.returnItemCollectionMetrics = returnItemCollectionMetrics;
}
/**
*
* Determines whether item collection metrics are returned. If set to SIZE, the response includes
* statistics about item collections, if any, that were modified during the operation are returned in the response.
* If set to NONE (the default), no statistics are returned.
*
*
* @return Determines whether item collection metrics are returned. If set to SIZE, the response
* includes statistics about item collections, if any, that were modified during the operation are returned
* in the response. If set to NONE (the default), no statistics are returned.
* @see ReturnItemCollectionMetrics
*/
public String getReturnItemCollectionMetrics() {
return this.returnItemCollectionMetrics;
}
/**
*
* Determines whether item collection metrics are returned. If set to SIZE, the response includes
* statistics about item collections, if any, that were modified during the operation are returned in the response.
* If set to NONE (the default), no statistics are returned.
*
*
* @param returnItemCollectionMetrics
* Determines whether item collection metrics are returned. If set to SIZE, the response
* includes statistics about item collections, if any, that were modified during the operation are returned
* in the response. If set to NONE (the default), no statistics are returned.
* @return Returns a reference to this object so that method calls can be chained together.
* @see ReturnItemCollectionMetrics
*/
public PutItemRequest withReturnItemCollectionMetrics(String returnItemCollectionMetrics) {
setReturnItemCollectionMetrics(returnItemCollectionMetrics);
return this;
}
/**
*
* Determines whether item collection metrics are returned. If set to SIZE, the response includes
* statistics about item collections, if any, that were modified during the operation are returned in the response.
* If set to NONE (the default), no statistics are returned.
*
*
* @param returnItemCollectionMetrics
* Determines whether item collection metrics are returned. If set to SIZE, the response
* includes statistics about item collections, if any, that were modified during the operation are returned
* in the response. If set to NONE (the default), no statistics are returned.
* @see ReturnItemCollectionMetrics
*/
public void setReturnItemCollectionMetrics(ReturnItemCollectionMetrics returnItemCollectionMetrics) {
this.returnItemCollectionMetrics = returnItemCollectionMetrics.toString();
}
/**
*
* Determines whether item collection metrics are returned. If set to SIZE, the response includes
* statistics about item collections, if any, that were modified during the operation are returned in the response.
* If set to NONE (the default), no statistics are returned.
*
*
* @param returnItemCollectionMetrics
* Determines whether item collection metrics are returned. If set to SIZE, the response
* includes statistics about item collections, if any, that were modified during the operation are returned
* in the response. If set to NONE (the default), no statistics are returned.
* @return Returns a reference to this object so that method calls can be chained together.
* @see ReturnItemCollectionMetrics
*/
public PutItemRequest withReturnItemCollectionMetrics(ReturnItemCollectionMetrics returnItemCollectionMetrics) {
setReturnItemCollectionMetrics(returnItemCollectionMetrics);
return this;
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression
* instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB
* will return a ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in the Expected map:
*
*
* -
*
* AND - If all of the conditions evaluate to true, then the entire map evaluates to true.
*
*
* -
*
* OR - If at least one of the conditions evaluate to true, then the entire map evaluates to true.
*
*
*
*
* If you omit ConditionalOperator, then AND is the default.
*
*
* The operation will succeed only if the entire map evaluates to true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* @param conditionalOperator
*
* This is a legacy parameter, for backward compatibility. New applications should use
* ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single
* API call; otherwise, DynamoDB will return a ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in the Expected map:
*
*
* -
*
* AND - If all of the conditions evaluate to true, then the entire map evaluates to true.
*
*
* -
*
* OR - If at least one of the conditions evaluate to true, then the entire map evaluates to
* true.
*
*
*
*
* If you omit ConditionalOperator, then AND is the default.
*
*
* The operation will succeed only if the entire map evaluates to true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
* @see ConditionalOperator
*/
public void setConditionalOperator(String conditionalOperator) {
this.conditionalOperator = conditionalOperator;
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression
* instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB
* will return a ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in the Expected map:
*
*
* -
*
* AND - If all of the conditions evaluate to true, then the entire map evaluates to true.
*
*
* -
*
* OR - If at least one of the conditions evaluate to true, then the entire map evaluates to true.
*
*
*
*
* If you omit ConditionalOperator, then AND is the default.
*
*
* The operation will succeed only if the entire map evaluates to true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* @return
* This is a legacy parameter, for backward compatibility. New applications should use
* ConditionExpression instead. Do not combine legacy parameters and expression parameters in a
* single API call; otherwise, DynamoDB will return a ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in the Expected map:
*
*
* -
*
* AND - If all of the conditions evaluate to true, then the entire map evaluates to true.
*
*
* -
*
* OR - If at least one of the conditions evaluate to true, then the entire map evaluates to
* true.
*
*
*
*
* If you omit ConditionalOperator, then AND is the default.
*
*
* The operation will succeed only if the entire map evaluates to true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
* @see ConditionalOperator
*/
public String getConditionalOperator() {
return this.conditionalOperator;
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression
* instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB
* will return a ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in the Expected map:
*
*
* -
*
* AND - If all of the conditions evaluate to true, then the entire map evaluates to true.
*
*
* -
*
* OR - If at least one of the conditions evaluate to true, then the entire map evaluates to true.
*
*
*
*
* If you omit ConditionalOperator, then AND is the default.
*
*
* The operation will succeed only if the entire map evaluates to true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* @param conditionalOperator
*
* This is a legacy parameter, for backward compatibility. New applications should use
* ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single
* API call; otherwise, DynamoDB will return a ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in the Expected map:
*
*
* -
*
* AND - If all of the conditions evaluate to true, then the entire map evaluates to true.
*
*
* -
*
* OR - If at least one of the conditions evaluate to true, then the entire map evaluates to
* true.
*
*
*
*
* If you omit ConditionalOperator, then AND is the default.
*
*
* The operation will succeed only if the entire map evaluates to true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
* @return Returns a reference to this object so that method calls can be chained together.
* @see ConditionalOperator
*/
public PutItemRequest withConditionalOperator(String conditionalOperator) {
setConditionalOperator(conditionalOperator);
return this;
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression
* instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB
* will return a ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in the Expected map:
*
*
* -
*
* AND - If all of the conditions evaluate to true, then the entire map evaluates to true.
*
*
* -
*
* OR - If at least one of the conditions evaluate to true, then the entire map evaluates to true.
*
*
*
*
* If you omit ConditionalOperator, then AND is the default.
*
*
* The operation will succeed only if the entire map evaluates to true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* @param conditionalOperator
*
* This is a legacy parameter, for backward compatibility. New applications should use
* ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single
* API call; otherwise, DynamoDB will return a ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in the Expected map:
*
*
* -
*
* AND - If all of the conditions evaluate to true, then the entire map evaluates to true.
*
*
* -
*
* OR - If at least one of the conditions evaluate to true, then the entire map evaluates to
* true.
*
*
*
*
* If you omit ConditionalOperator, then AND is the default.
*
*
* The operation will succeed only if the entire map evaluates to true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
* @see ConditionalOperator
*/
public void setConditionalOperator(ConditionalOperator conditionalOperator) {
this.conditionalOperator = conditionalOperator.toString();
}
/**
*
*
* This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression
* instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB
* will return a ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in the Expected map:
*
*
* -
*
* AND - If all of the conditions evaluate to true, then the entire map evaluates to true.
*
*
* -
*
* OR - If at least one of the conditions evaluate to true, then the entire map evaluates to true.
*
*
*
*
* If you omit ConditionalOperator, then AND is the default.
*
*
* The operation will succeed only if the entire map evaluates to true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
*
*
* @param conditionalOperator
*
* This is a legacy parameter, for backward compatibility. New applications should use
* ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single
* API call; otherwise, DynamoDB will return a ValidationException exception.
*
*
*
* A logical operator to apply to the conditions in the Expected map:
*
*
* -
*
* AND - If all of the conditions evaluate to true, then the entire map evaluates to true.
*
*
* -
*
* OR - If at least one of the conditions evaluate to true, then the entire map evaluates to
* true.
*
*
*
*
* If you omit ConditionalOperator, then AND is the default.
*
*
* The operation will succeed only if the entire map evaluates to true.
*
*
*
* This parameter does not support attributes of type List or Map.
*
* @return Returns a reference to this object so that method calls can be chained together.
* @see ConditionalOperator
*/
public PutItemRequest withConditionalOperator(ConditionalOperator conditionalOperator) {
setConditionalOperator(conditionalOperator);
return this;
}
/**
*
* A condition that must be satisfied in order for a conditional PutItem operation to succeed.
*
*
* An expression can contain any of the following:
*
*
* -
*
* Functions: attribute_exists | attribute_not_exists | attribute_type | contains | begins_with | size
*
*
* These function names are case-sensitive.
*
*
* -
*
* Comparison operators:
* = | <> | < | > | <= | >= | BETWEEN | IN
*
*
* -
*
* Logical operators: AND | OR | NOT
*
*
*
*
* For more information on condition expressions, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
*
*
*
* ConditionExpression replaces the legacy ConditionalOperator and Expected parameters.
*
*
*
* @param conditionExpression
* A condition that must be satisfied in order for a conditional PutItem operation to succeed.
*
* An expression can contain any of the following:
*
*
* -
*
* Functions:
* attribute_exists | attribute_not_exists | attribute_type | contains | begins_with | size
*
*
* These function names are case-sensitive.
*
*
* -
*
* Comparison operators:
* = | <> | < | > | <= | >= | BETWEEN | IN
*
*
* -
*
* Logical operators: AND | OR | NOT
*
*
*
*
* For more information on condition expressions, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
*
*
*
* ConditionExpression replaces the legacy ConditionalOperator and Expected parameters.
*
*/
public void setConditionExpression(String conditionExpression) {
this.conditionExpression = conditionExpression;
}
/**
*
* A condition that must be satisfied in order for a conditional PutItem operation to succeed.
*
*
* An expression can contain any of the following:
*
*
* -
*
* Functions: attribute_exists | attribute_not_exists | attribute_type | contains | begins_with | size
*
*
* These function names are case-sensitive.
*
*
* -
*
* Comparison operators:
* = | <> | < | > | <= | >= | BETWEEN | IN
*
*
* -
*
* Logical operators: AND | OR | NOT
*
*
*
*
* For more information on condition expressions, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
*
*
*
* ConditionExpression replaces the legacy ConditionalOperator and Expected parameters.
*
*
*
* @return A condition that must be satisfied in order for a conditional PutItem operation to succeed.
*
* An expression can contain any of the following:
*
*
* -
*
* Functions:
* attribute_exists | attribute_not_exists | attribute_type | contains | begins_with | size
*
*
* These function names are case-sensitive.
*
*
* -
*
* Comparison operators:
* = | <> | < | > | <= | >= | BETWEEN | IN
*
*
* -
*
* Logical operators: AND | OR | NOT
*
*
*
*
* For more information on condition expressions, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
*
*
*
* ConditionExpression replaces the legacy ConditionalOperator and Expected parameters.
*
*/
public String getConditionExpression() {
return this.conditionExpression;
}
/**
*
* A condition that must be satisfied in order for a conditional PutItem operation to succeed.
*
*
* An expression can contain any of the following:
*
*
* -
*
* Functions: attribute_exists | attribute_not_exists | attribute_type | contains | begins_with | size
*
*
* These function names are case-sensitive.
*
*
* -
*
* Comparison operators:
* = | <> | < | > | <= | >= | BETWEEN | IN
*
*
* -
*
* Logical operators: AND | OR | NOT
*
*
*
*
* For more information on condition expressions, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
*
*
*
* ConditionExpression replaces the legacy ConditionalOperator and Expected parameters.
*
*
*
* @param conditionExpression
* A condition that must be satisfied in order for a conditional PutItem operation to succeed.
*
* An expression can contain any of the following:
*
*
* -
*
* Functions:
* attribute_exists | attribute_not_exists | attribute_type | contains | begins_with | size
*
*
* These function names are case-sensitive.
*
*
* -
*
* Comparison operators:
* = | <> | < | > | <= | >= | BETWEEN | IN
*
*
* -
*
* Logical operators: AND | OR | NOT
*
*
*
*
* For more information on condition expressions, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
*
*
*
* ConditionExpression replaces the legacy ConditionalOperator and Expected parameters.
*
* @return Returns a reference to this object so that method calls can be chained together.
*/
public PutItemRequest withConditionExpression(String conditionExpression) {
setConditionExpression(conditionExpression);
return this;
}
/**
*
* One or more substitution tokens for attribute names in an expression. The following are some use cases for using
* ExpressionAttributeNames:
*
*
* -
*
* To access an attribute whose name conflicts with a DynamoDB reserved word.
*
*
* -
*
* To create a placeholder for repeating occurrences of an attribute name in an expression.
*
*
* -
*
* To prevent special characters in an attribute name from being misinterpreted in an expression.
*
*
*
*
* Use the # character in an expression to dereference an attribute name. For example, consider the following
* attribute name:
*
*
* -
*
* Percentile
*
*
*
*
* The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For
* the complete list of reserved words, see Reserved Words in
* the Amazon DynamoDB Developer Guide). To work around this, you could specify the following for
* ExpressionAttributeNames:
*
*
* -
*
* {"#P":"Percentile"}
*
*
*
*
* You could then use this substitution in an expression, as in this example:
*
*
* -
*
* #P = :val
*
*
*
*
*
* Tokens that begin with the : character are expression attribute values, which are placeholders for
* the actual value at runtime.
*
*
*
* For more information on expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer Guide.
*
*
* @return One or more substitution tokens for attribute names in an expression. The following are some use cases
* for using ExpressionAttributeNames:
*
* -
*
* To access an attribute whose name conflicts with a DynamoDB reserved word.
*
*
* -
*
* To create a placeholder for repeating occurrences of an attribute name in an expression.
*
*
* -
*
* To prevent special characters in an attribute name from being misinterpreted in an expression.
*
*
*
*
* Use the # character in an expression to dereference an attribute name. For example, consider the
* following attribute name:
*
*
* -
*
* Percentile
*
*
*
*
* The name of this attribute conflicts with a reserved word, so it cannot be used directly in an
* expression. (For the complete list of reserved words, see Reserved
* Words in the Amazon DynamoDB Developer Guide). To work around this, you could specify the
* following for ExpressionAttributeNames:
*
*
* -
*
* {"#P":"Percentile"}
*
*
*
*
* You could then use this substitution in an expression, as in this example:
*
*
* -
*
* #P = :val
*
*
*
*
*
* Tokens that begin with the : character are expression attribute values, which are
* placeholders for the actual value at runtime.
*
*
*
* For more information on expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer Guide.
*/
public java.util.Map getExpressionAttributeNames() {
return expressionAttributeNames;
}
/**
*
* One or more substitution tokens for attribute names in an expression. The following are some use cases for using
* ExpressionAttributeNames:
*
*
* -
*
* To access an attribute whose name conflicts with a DynamoDB reserved word.
*
*
* -
*
* To create a placeholder for repeating occurrences of an attribute name in an expression.
*
*
* -
*
* To prevent special characters in an attribute name from being misinterpreted in an expression.
*
*
*
*
* Use the # character in an expression to dereference an attribute name. For example, consider the following
* attribute name:
*
*
* -
*
* Percentile
*
*
*
*
* The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For
* the complete list of reserved words, see Reserved Words in
* the Amazon DynamoDB Developer Guide). To work around this, you could specify the following for
* ExpressionAttributeNames:
*
*
* -
*
* {"#P":"Percentile"}
*
*
*
*
* You could then use this substitution in an expression, as in this example:
*
*
* -
*
* #P = :val
*
*
*
*
*
* Tokens that begin with the : character are expression attribute values, which are placeholders for
* the actual value at runtime.
*
*
*
* For more information on expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer Guide.
*
*
* @param expressionAttributeNames
* One or more substitution tokens for attribute names in an expression. The following are some use cases for
* using ExpressionAttributeNames:
*
* -
*
* To access an attribute whose name conflicts with a DynamoDB reserved word.
*
*
* -
*
* To create a placeholder for repeating occurrences of an attribute name in an expression.
*
*
* -
*
* To prevent special characters in an attribute name from being misinterpreted in an expression.
*
*
*
*
* Use the # character in an expression to dereference an attribute name. For example, consider the
* following attribute name:
*
*
* -
*
* Percentile
*
*
*
*
* The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression.
* (For the complete list of reserved words, see Reserved
* Words in the Amazon DynamoDB Developer Guide). To work around this, you could specify the
* following for ExpressionAttributeNames:
*
*
* -
*
* {"#P":"Percentile"}
*
*
*
*
* You could then use this substitution in an expression, as in this example:
*
*
* -
*
* #P = :val
*
*
*
*
*
* Tokens that begin with the : character are expression attribute values, which are
* placeholders for the actual value at runtime.
*
*
*
* For more information on expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer Guide.
*/
public void setExpressionAttributeNames(java.util.Map expressionAttributeNames) {
this.expressionAttributeNames = expressionAttributeNames;
}
/**
*
* One or more substitution tokens for attribute names in an expression. The following are some use cases for using
* ExpressionAttributeNames:
*
*
* -
*
* To access an attribute whose name conflicts with a DynamoDB reserved word.
*
*
* -
*
* To create a placeholder for repeating occurrences of an attribute name in an expression.
*
*
* -
*
* To prevent special characters in an attribute name from being misinterpreted in an expression.
*
*
*
*
* Use the # character in an expression to dereference an attribute name. For example, consider the following
* attribute name:
*
*
* -
*
* Percentile
*
*
*
*
* The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For
* the complete list of reserved words, see Reserved Words in
* the Amazon DynamoDB Developer Guide). To work around this, you could specify the following for
* ExpressionAttributeNames:
*
*
* -
*
* {"#P":"Percentile"}
*
*
*
*
* You could then use this substitution in an expression, as in this example:
*
*
* -
*
* #P = :val
*
*
*
*
*
* Tokens that begin with the : character are expression attribute values, which are placeholders for
* the actual value at runtime.
*
*
*
* For more information on expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer Guide.
*
*
* @param expressionAttributeNames
* One or more substitution tokens for attribute names in an expression. The following are some use cases for
* using ExpressionAttributeNames:
*
* -
*
* To access an attribute whose name conflicts with a DynamoDB reserved word.
*
*
* -
*
* To create a placeholder for repeating occurrences of an attribute name in an expression.
*
*
* -
*
* To prevent special characters in an attribute name from being misinterpreted in an expression.
*
*
*
*
* Use the # character in an expression to dereference an attribute name. For example, consider the
* following attribute name:
*
*
* -
*
* Percentile
*
*
*
*
* The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression.
* (For the complete list of reserved words, see Reserved
* Words in the Amazon DynamoDB Developer Guide). To work around this, you could specify the
* following for ExpressionAttributeNames:
*
*
* -
*
* {"#P":"Percentile"}
*
*
*
*
* You could then use this substitution in an expression, as in this example:
*
*
* -
*
* #P = :val
*
*
*
*
*
* Tokens that begin with the : character are expression attribute values, which are
* placeholders for the actual value at runtime.
*
*
*
* For more information on expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer Guide.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public PutItemRequest withExpressionAttributeNames(java.util.Map expressionAttributeNames) {
setExpressionAttributeNames(expressionAttributeNames);
return this;
}
public PutItemRequest addExpressionAttributeNamesEntry(String key, String value) {
if (null == this.expressionAttributeNames) {
this.expressionAttributeNames = new java.util.HashMap();
}
if (this.expressionAttributeNames.containsKey(key))
throw new IllegalArgumentException("Duplicated keys (" + key.toString() + ") are provided.");
this.expressionAttributeNames.put(key, value);
return this;
}
/**
* Removes all the entries added into ExpressionAttributeNames. <p> Returns a reference to this object so that
* method calls can be chained together.
*/
public PutItemRequest clearExpressionAttributeNamesEntries() {
this.expressionAttributeNames = null;
return this;
}
/**
*
* One or more values that can be substituted in an expression.
*
*
* Use the : (colon) character in an expression to dereference an attribute value. For example, suppose that
* you wanted to check whether the value of the ProductStatus attribute was one of the following:
*
*
* Available | Backordered | Discontinued
*
*
* You would first need to specify ExpressionAttributeValues as follows:
*
*
* { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
*
*
* You could then use these values in an expression, such as this:
*
*
* ProductStatus IN (:avail, :back, :disc)
*
*
* For more information on expression attribute values, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
*
*
* @return One or more values that can be substituted in an expression.
*
* Use the : (colon) character in an expression to dereference an attribute value. For example,
* suppose that you wanted to check whether the value of the ProductStatus attribute was one of the
* following:
*
*
* Available | Backordered | Discontinued
*
*
* You would first need to specify ExpressionAttributeValues as follows:
*
*
* { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
*
*
* You could then use these values in an expression, such as this:
*
*
* ProductStatus IN (:avail, :back, :disc)
*
*
* For more information on expression attribute values, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
*/
public java.util.Map getExpressionAttributeValues() {
return expressionAttributeValues;
}
/**
*
* One or more values that can be substituted in an expression.
*
*
* Use the : (colon) character in an expression to dereference an attribute value. For example, suppose that
* you wanted to check whether the value of the ProductStatus attribute was one of the following:
*
*
* Available | Backordered | Discontinued
*
*
* You would first need to specify ExpressionAttributeValues as follows:
*
*
* { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
*
*
* You could then use these values in an expression, such as this:
*
*
* ProductStatus IN (:avail, :back, :disc)
*
*
* For more information on expression attribute values, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
*
*
* @param expressionAttributeValues
* One or more values that can be substituted in an expression.
*
* Use the : (colon) character in an expression to dereference an attribute value. For example,
* suppose that you wanted to check whether the value of the ProductStatus attribute was one of the
* following:
*
*
* Available | Backordered | Discontinued
*
*
* You would first need to specify ExpressionAttributeValues as follows:
*
*
* { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
*
*
* You could then use these values in an expression, such as this:
*
*
* ProductStatus IN (:avail, :back, :disc)
*
*
* For more information on expression attribute values, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
*/
public void setExpressionAttributeValues(java.util.Map expressionAttributeValues) {
this.expressionAttributeValues = expressionAttributeValues;
}
/**
*
* One or more values that can be substituted in an expression.
*
*
* Use the : (colon) character in an expression to dereference an attribute value. For example, suppose that
* you wanted to check whether the value of the ProductStatus attribute was one of the following:
*
*
* Available | Backordered | Discontinued
*
*
* You would first need to specify ExpressionAttributeValues as follows:
*
*
* { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
*
*
* You could then use these values in an expression, such as this:
*
*
* ProductStatus IN (:avail, :back, :disc)
*
*
* For more information on expression attribute values, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
*
*
* @param expressionAttributeValues
* One or more values that can be substituted in an expression.
*
* Use the : (colon) character in an expression to dereference an attribute value. For example,
* suppose that you wanted to check whether the value of the ProductStatus attribute was one of the
* following:
*
*
* Available | Backordered | Discontinued
*
*
* You would first need to specify ExpressionAttributeValues as follows:
*
*
* { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
*
*
* You could then use these values in an expression, such as this:
*
*
* ProductStatus IN (:avail, :back, :disc)
*
*
* For more information on expression attribute values, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public PutItemRequest withExpressionAttributeValues(java.util.Map expressionAttributeValues) {
setExpressionAttributeValues(expressionAttributeValues);
return this;
}
public PutItemRequest addExpressionAttributeValuesEntry(String key, AttributeValue value) {
if (null == this.expressionAttributeValues) {
this.expressionAttributeValues = new java.util.HashMap();
}
if (this.expressionAttributeValues.containsKey(key))
throw new IllegalArgumentException("Duplicated keys (" + key.toString() + ") are provided.");
this.expressionAttributeValues.put(key, value);
return this;
}
/**
* Removes all the entries added into ExpressionAttributeValues. <p> Returns a reference to this object so that
* method calls can be chained together.
*/
public PutItemRequest clearExpressionAttributeValuesEntries() {
this.expressionAttributeValues = null;
return this;
}
/**
* Returns a string representation of this object; useful for testing and debugging.
*
* @return A string representation of this object.
*
* @see java.lang.Object#toString()
*/
@Override
public String toString() {
StringBuilder sb = new StringBuilder();
sb.append("{");
if (getTableName() != null)
sb.append("TableName: " + getTableName() + ",");
if (getItem() != null)
sb.append("Item: " + getItem() + ",");
if (getExpected() != null)
sb.append("Expected: " + getExpected() + ",");
if (getReturnValues() != null)
sb.append("ReturnValues: " + getReturnValues() + ",");
if (getReturnConsumedCapacity() != null)
sb.append("ReturnConsumedCapacity: " + getReturnConsumedCapacity() + ",");
if (getReturnItemCollectionMetrics() != null)
sb.append("ReturnItemCollectionMetrics: " + getReturnItemCollectionMetrics() + ",");
if (getConditionalOperator() != null)
sb.append("ConditionalOperator: " + getConditionalOperator() + ",");
if (getConditionExpression() != null)
sb.append("ConditionExpression: " + getConditionExpression() + ",");
if (getExpressionAttributeNames() != null)
sb.append("ExpressionAttributeNames: " + getExpressionAttributeNames() + ",");
if (getExpressionAttributeValues() != null)
sb.append("ExpressionAttributeValues: " + getExpressionAttributeValues());
sb.append("}");
return sb.toString();
}
@Override
public boolean equals(Object obj) {
if (this == obj)
return true;
if (obj == null)
return false;
if (obj instanceof PutItemRequest == false)
return false;
PutItemRequest other = (PutItemRequest) obj;
if (other.getTableName() == null ^ this.getTableName() == null)
return false;
if (other.getTableName() != null && other.getTableName().equals(this.getTableName()) == false)
return false;
if (other.getItem() == null ^ this.getItem() == null)
return false;
if (other.getItem() != null && other.getItem().equals(this.getItem()) == false)
return false;
if (other.getExpected() == null ^ this.getExpected() == null)
return false;
if (other.getExpected() != null && other.getExpected().equals(this.getExpected()) == false)
return false;
if (other.getReturnValues() == null ^ this.getReturnValues() == null)
return false;
if (other.getReturnValues() != null && other.getReturnValues().equals(this.getReturnValues()) == false)
return false;
if (other.getReturnConsumedCapacity() == null ^ this.getReturnConsumedCapacity() == null)
return false;
if (other.getReturnConsumedCapacity() != null && other.getReturnConsumedCapacity().equals(this.getReturnConsumedCapacity()) == false)
return false;
if (other.getReturnItemCollectionMetrics() == null ^ this.getReturnItemCollectionMetrics() == null)
return false;
if (other.getReturnItemCollectionMetrics() != null && other.getReturnItemCollectionMetrics().equals(this.getReturnItemCollectionMetrics()) == false)
return false;
if (other.getConditionalOperator() == null ^ this.getConditionalOperator() == null)
return false;
if (other.getConditionalOperator() != null && other.getConditionalOperator().equals(this.getConditionalOperator()) == false)
return false;
if (other.getConditionExpression() == null ^ this.getConditionExpression() == null)
return false;
if (other.getConditionExpression() != null && other.getConditionExpression().equals(this.getConditionExpression()) == false)
return false;
if (other.getExpressionAttributeNames() == null ^ this.getExpressionAttributeNames() == null)
return false;
if (other.getExpressionAttributeNames() != null && other.getExpressionAttributeNames().equals(this.getExpressionAttributeNames()) == false)
return false;
if (other.getExpressionAttributeValues() == null ^ this.getExpressionAttributeValues() == null)
return false;
if (other.getExpressionAttributeValues() != null && other.getExpressionAttributeValues().equals(this.getExpressionAttributeValues()) == false)
return false;
return true;
}
@Override
public int hashCode() {
final int prime = 31;
int hashCode = 1;
hashCode = prime * hashCode + ((getTableName() == null) ? 0 : getTableName().hashCode());
hashCode = prime * hashCode + ((getItem() == null) ? 0 : getItem().hashCode());
hashCode = prime * hashCode + ((getExpected() == null) ? 0 : getExpected().hashCode());
hashCode = prime * hashCode + ((getReturnValues() == null) ? 0 : getReturnValues().hashCode());
hashCode = prime * hashCode + ((getReturnConsumedCapacity() == null) ? 0 : getReturnConsumedCapacity().hashCode());
hashCode = prime * hashCode + ((getReturnItemCollectionMetrics() == null) ? 0 : getReturnItemCollectionMetrics().hashCode());
hashCode = prime * hashCode + ((getConditionalOperator() == null) ? 0 : getConditionalOperator().hashCode());
hashCode = prime * hashCode + ((getConditionExpression() == null) ? 0 : getConditionExpression().hashCode());
hashCode = prime * hashCode + ((getExpressionAttributeNames() == null) ? 0 : getExpressionAttributeNames().hashCode());
hashCode = prime * hashCode + ((getExpressionAttributeValues() == null) ? 0 : getExpressionAttributeValues().hashCode());
return hashCode;
}
@Override
public PutItemRequest clone() {
return (PutItemRequest) super.clone();
}
}