com.amazonaws.services.dynamodbv2.datamodeling.DynamoDBQueryExpression Maven / Gradle / Ivy
Show all versions of aws-java-sdk-dynamodb Show documentation
/*
* Copyright 2011-2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License").
* You may not use this file except in compliance with the License.
* A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
* express or implied. See the License for the specific language governing
* permissions and limitations under the License.
*/
package com.amazonaws.services.dynamodbv2.datamodeling;
import java.util.HashMap;
import java.util.Map;
import com.amazonaws.services.dynamodbv2.model.AttributeValue;
import com.amazonaws.services.dynamodbv2.model.Condition;
import com.amazonaws.services.dynamodbv2.model.ConditionalOperator;
import com.amazonaws.services.dynamodbv2.model.QueryRequest;
import com.amazonaws.services.dynamodbv2.model.ReturnConsumedCapacity;
import com.amazonaws.services.dynamodbv2.model.Select;
/**
* A query expression.
*/
public class DynamoDBQueryExpression {
private boolean consistentRead = true;
private boolean scanIndexForward = true;
private T hashKeyValues;
private Map rangeKeyConditions;
private Map exclusiveStartKey;
private Integer limit;
private String indexName;
private Map queryFilter;
private String conditionalOperator;
/**
* Evaluates the query results and returns only the desired values.
*
* The condition you specify is applied to the items queried; any items that
* do not match the expression are not returned.
*/
private String filterExpression;
/**
* The condition that specifies the key value(s) for items to be retrieved
* by the Query action.
*/
private String keyConditionExpression;
/**
* One or more substitution variables for simplifying complex expressions.
*/
private Map expressionAttributeNames;
/**
* One or more values that can be substituted in an expression.
*/
private Map expressionAttributeValues;
/**
* The attributes to be returned in the result. You can retrieve all item
* attributes, specific item attributes, the count of matching items, or
* in the case of an index, some or all of the attributes projected into
* the index. -
ALL_ATTRIBUTES - Returns all of
* the item attributes from the specified table or index. If you query a
* local secondary index, then for each matching item in the index
* DynamoDB will fetch the entire item from the parent table. If the
* index is configured to project all item attributes, then all of the
* data can be obtained from the local secondary index, and no fetching
* is required.
-
ALL_PROJECTED_ATTRIBUTES -
* Allowed only when querying an index. Retrieves all attributes that
* have been projected into the index. If the index is configured to
* project all attributes, this return value is equivalent to specifying
* ALL_ATTRIBUTES.
-
COUNT -
* Returns the number of matching items, rather than the matching items
* themselves.
-
SPECIFIC_ATTRIBUTES - Returns
* only the attributes listed in AttributesToGet. This return
* value is equivalent to specifying AttributesToGet without
* specifying any value for Select.
If you query a local
* secondary index and request only attributes that are projected into
* that index, the operation will read only the index and not the table.
* If any of the requested attributes are not projected into the local
* secondary index, DynamoDB will fetch each of these attributes from the
* parent table. This extra fetching incurs additional throughput cost
* and latency.
If you query a global secondary index, you can only
* request attributes that are projected into the index. Global secondary
* index queries cannot fetch attributes from the parent table.
*
If neither Select nor AttributesToGet are
* specified, DynamoDB defaults to ALL_ATTRIBUTES when
* accessing a table, and ALL_PROJECTED_ATTRIBUTES when
* accessing an index. You cannot use both Select and
* AttributesToGet together in a single request, unless the value
* for Select is SPECIFIC_ATTRIBUTES. (This usage is
* equivalent to specifying AttributesToGet without any value for
* Select.)
*
* Constraints:
* Allowed Values: ALL_ATTRIBUTES, ALL_PROJECTED_ATTRIBUTES, SPECIFIC_ATTRIBUTES, COUNT
*/
private String select;
/**
* A string that identifies one or more attributes to retrieve from the
* table. These attributes can include scalars, sets, or elements of a
* JSON document. The attributes in the expression must be separated by
* commas.
If no attribute names are specified, then all attributes
* will be returned. If any of the requested attributes are not found,
* they will not appear in the result.
For more information, go to Accessing
* Item Attributes in the Amazon DynamoDB Developer Guide.
*/
private String projectionExpression;
/**
* A value that if set to TOTAL, the response includes
* ConsumedCapacity data for tables and indexes. If set to
* INDEXES, the response includes ConsumedCapacity
* for indexes. If set to NONE (the default),
* ConsumedCapacity is not included in the response.
*
* Constraints:
* Allowed Values: INDEXES, TOTAL, NONE
*
* If enabled, the underlying request to DynamoDB will include the
* configured parameter value and the low-level response from DynamoDB will
* include the amount of capacity consumed by the query. Currently, the
* consumed capacity is only exposed through the DynamoDBMapper when you
* call {@code DynamoDBMapper.queryPage}, not {@code DynamoDBMapper.query}.
*/
private String returnConsumedCapacity;
/**
* Returns whether this query uses consistent reads.
*/
public boolean isConsistentRead() {
return consistentRead;
}
/**
* Sets whether this query uses consistent reads.
*/
public void setConsistentRead(boolean consistentRead) {
this.consistentRead = consistentRead;
}
/**
* Sets whether this query uses consistent reads and returns a pointer to
* this object for method-chaining.
*/
public DynamoDBQueryExpression withConsistentRead(boolean consistentRead) {
this.consistentRead = consistentRead;
return this;
}
/**
* Returns whether this query scans forward.
*/
public boolean isScanIndexForward() {
return scanIndexForward;
}
/**
* Sets whether this query scans forward.
*/
public void setScanIndexForward(boolean scanIndexForward) {
this.scanIndexForward = scanIndexForward;
}
/**
* Sets whether this query scans forward and returns a pointer to this
* object for method-chaining.
*/
public DynamoDBQueryExpression withScanIndexForward(boolean scanIndexForward) {
this.scanIndexForward = scanIndexForward;
return this;
}
/**
* Returns the exclusive start key for this query.
*/
public Map getExclusiveStartKey() {
return exclusiveStartKey;
}
/**
* Sets the exclusive start key for this query.
*/
public void setExclusiveStartKey(Map exclusiveStartKey) {
this.exclusiveStartKey = exclusiveStartKey;
}
/**
* Sets the exclusive start key for this query and returns a pointer to this
* object for method-chaining.
*/
public DynamoDBQueryExpression withExclusiveStartKey(Map exclusiveStartKey) {
this.exclusiveStartKey = exclusiveStartKey;
return this;
}
/**
* Returns the maximum number of items to retrieve in each service request
* to DynamoDB.
*
* Note that when calling {@code DynamoDBMapper.query}, multiple requests
* are made to DynamoDB if needed to retrieve the entire result set. Setting
* this will limit the number of items retrieved by each request, NOT
* the total number of results that will be retrieved. Use
* {@code DynamoDBMapper.queryPage} to retrieve a single page of items from
* DynamoDB.
*/
public Integer getLimit() {
return limit;
}
/**
* Sets the maximum number of items to retrieve in each service request to
* DynamoDB.
*
* Note that when calling {@code DynamoDBMapper.query}, multiple requests
* are made to DynamoDB if needed to retrieve the entire result set. Setting
* this will limit the number of items retrieved by each request, NOT
* the total number of results that will be retrieved. Use
* {@code DynamoDBMapper.queryPage} to retrieve a single page of items from
* DynamoDB.
*/
public void setLimit(Integer limit) {
this.limit = limit;
}
/**
* Sets the maximum number of items to retrieve in each service request to
* DynamoDB and returns a pointer to this object for method-chaining.
*
* Note that when calling {@code DynamoDBMapper.query}, multiple requests
* are made to DynamoDB if needed to retrieve the entire result set. Setting
* this will limit the number of items retrieved by each request, NOT
* the total number of results that will be retrieved. Use
* {@code DynamoDBMapper.queryPage} to retrieve a single page of items from
* DynamoDB.
*/
public DynamoDBQueryExpression withLimit(Integer limit) {
this.limit = limit;
return this;
}
/**
* Gets the hash key value(s) for this query. All hash key attributes for
* the table must be specified with this key object.
*/
public T getHashKeyValues() {
return hashKeyValues;
}
/**
* Sets the hash key value(s) for this query. All hash key attributes for
* the table must be specified with this key object.
*
* Note 1: Currently the DynamoDBMapper supports only one value per hash key.
* Note 2: Currently the Amazon DynamoDB supports only one hash key per
* table/index.
*/
public void setHashKeyValues(T hashKeyValues) {
this.hashKeyValues = hashKeyValues;
}
/**
* Sets the hash key value(s) for this query. All hash key attributes for
* the table must be specified with this key object.
*/
public DynamoDBQueryExpression withHashKeyValues(T hashKObject) {
setHashKeyValues(hashKObject);
return this;
}
/**
* Gets the range key condition for this query. All range key attributes for
* the table must be specified by attribute name in the map.
*/
public Map getRangeKeyConditions() {
return rangeKeyConditions;
}
/**
* Sets the range key condition for this query. All range key attributes for
* the table must be specified by attribute name in the map.
*
* @param rangeKeyConditions a map from key name to condition
* NOTE: The current DynamoDB service only allows up to one
* range key condition per query. Providing more than one
* range key condition will result in a SdkClientException.
*/
public void setRangeKeyConditions(Map rangeKeyConditions) {
this.rangeKeyConditions = rangeKeyConditions;
}
/**
* Sets the range key condition for this query. All range key attributes for
* the table must be specified by attribute name in the map.
*
* @param rangeKeyConditions a map from key name to condition
* NOTE: The current DynamoDB service only allows up to one range
* key condition per query. Providing more than one range key
* condition will result in a SdkClientException.
*/
public DynamoDBQueryExpression withRangeKeyConditions(Map rangeKeyConditions) {
setRangeKeyConditions(rangeKeyConditions);
return this;
}
/**
* Sets one range key condition for this query, using the attribute name of
* the range key. All range key attributes for the table must be specified
* by using {@link DynamoDBRangeKey} or {@link DynamoDBIndexRangeKey} annotations
* before executing the query.
*
* - If the attribute is the primary range key
* - users should NOT set any index name for this query.
* - If the attribute is an index range key
* -
* {@link DynamoDBMapper} will automatically set the index name if the
* range key is annotated as only used by one local secondary index,
* otherwise users must set the index name manually by either
* {@link DynamoDBQueryExpression#setIndexName(String)} or
* {@link DynamoDBQueryExpression#withIndexName(String)}.
*
*
*
* @param rangeKeyAttributeName
* This can be either the primary range key of the table or an
* index range key.
*
* @param rangeKeyCondition
* Condition specified on the given range key for this query.
*/
public DynamoDBQueryExpression withRangeKeyCondition(String rangeKeyAttributeName, Condition rangeKeyCondition) {
if ( rangeKeyConditions == null )
rangeKeyConditions = new HashMap();
rangeKeyConditions.put(rangeKeyAttributeName, rangeKeyCondition);
return this;
}
/**
* Returns the name of the index to be used by this query.
*/
public String getIndexName() {
return indexName;
}
/**
* Sets the name of the index to be used by this query. The hash key
* and/or range key of the index must be specified by adding
* {@link DynamoDBIndexHashKey} or {@code DynamoDBIndexRangeKey}
* annotations to the appropriate getter methods of the mapped
* object.
*/
public void setIndexName(String indexName) {
this.indexName = indexName;
}
/**
* Sets the name of the index to be used by this query. The hash key
* and/or range key of the index must be specified by adding
* {@link DynamoDBIndexHashKey} or {@code DynamoDBIndexRangeKey}
* annotations to the appropriate getter methods of the mapped
* object.
*
* Returns a pointer to this object for method-chaining.
*/
public DynamoDBQueryExpression withIndexName(String indexName) {
setIndexName(indexName);
return this;
}
/**
* Returns the query filter applied on this query.
*/
public Map getQueryFilter() {
return queryFilter;
}
/**
* Sets the query filter applied on this query.
*/
public void setQueryFilter(Map queryFilter) {
this.queryFilter = queryFilter;
}
/**
* Sets the query filter applied on this query.
* Returns a pointer to this object for method-chaining.
*/
public DynamoDBQueryExpression withQueryFilter(Map queryFilter) {
setQueryFilter(queryFilter);
return this;
}
/**
* Adds a new condition to the the query filter.
* Returns a pointer to this object for method-chaining.
*
* @param attributeName
* The name of the attribute on which the specified condition
* operates.
* @param condition
* The filter condition applied on the attribute.
*/
public DynamoDBQueryExpression withQueryFilterEntry(String attributeName, Condition condition) {
if (queryFilter == null) {
queryFilter = new HashMap();
}
queryFilter.put(attributeName, condition);
return this;
}
/**
* Returns the logical operator on the query filter conditions.
*/
public String getConditionalOperator() {
return conditionalOperator;
}
/**
* Sets the logical operator on the query filter conditions.
*/
public void setConditionalOperator(String conditionalOperator) {
this.conditionalOperator = conditionalOperator;
}
/**
* Sets the logical operator on the query filter conditions.
* Returns a pointer to this object for method-chaining.
*/
public DynamoDBQueryExpression withConditionalOperator(String conditionalOperator) {
setConditionalOperator(conditionalOperator);
return this;
}
/**
* Sets the logical operator on the query filter conditions.
*/
public void setConditionalOperator(ConditionalOperator conditionalOperator) {
this.conditionalOperator = conditionalOperator.toString();
}
/**
* Sets the logical operator on the query filter conditions.
* Returns a pointer to this object for method-chaining.
*/
public DynamoDBQueryExpression withConditionalOperator(ConditionalOperator conditionalOperator) {
setConditionalOperator(conditionalOperator);
return this;
}
/**
* Evaluates the query results and returns only the desired values.
*
* The condition you specify is applied to the items queried; any items that
* do not match the expression are not returned.
*
* @return Evaluates the query results and returns only the desired values.
*
* The condition you specify is applied to the items queried; any
* items that do not match the expression are not returned.
* @see QueryRequest#getFilterExpression()
*/
public String getFilterExpression() {
return filterExpression;
}
/**
* Evaluates the query results and returns only the desired values.
*
* The condition you specify is applied to the items queried; any items that
* do not match the expression are not returned.
*
* @param filterExpression
* Evaluates the query results and returns only the desired
* values.
*
* The condition you specify is applied to the items queried; any
* items that do not match the expression are not returned.
* @see QueryRequest#setFilterExpression(String)
*/
public void setFilterExpression(String filterExpression) {
this.filterExpression = filterExpression;
}
/**
* Evaluates the query results and returns only the desired values.
*
* The condition you specify is applied to the items queried; any items that
* do not match the expression are not returned.
*
* Returns a reference to this object so that method calls can be chained
* together.
*
* @param filterExpression
* Evaluates the query results and returns only the desired
* values.
*
* The condition you specify is applied to the items queried; any
* items that do not match the expression are not returned.
*
* @return A reference to this updated object so that method calls can be
* chained together.
* @see QueryRequest#withFilterExpression(String)
*/
public DynamoDBQueryExpression withFilterExpression(
String filterExpression) {
this.filterExpression = filterExpression;
return this;
}
/**
* Returns the condition that specifies the key value(s) for items to be
* retrieved by the Query action.
*
* The condition must perform an equality test on a single hash key value.
* The condition can also test for one or more range key values. A
* Query can use KeyConditionExpression to retrieve a single
* item with a given hash and range key value, or several items that have
* the same hash key value but different range key values.
*
* The hash key equality test is required, and must be specified in the
* following format:
*
* hashAttributeName = :hashval
*
* If you also want to provide a range key condition, it must be combined
* using AND with the hash key condition. Following is an example,
* using the = comparison operator for the range key:
*
* hashAttributeName = :hashval AND
* rangeAttributeName = :rangeval
*
* Valid comparisons for the range key condition are as follows:
*
* -
*
* rangeAttributeName = :rangeval - true if
* the range key is equal to :rangeval.
* -
*
* rangeAttributeName < :rangeval - true if
* the range key is less than :rangeval.
* -
*
* rangeAttributeName <= :rangeval - true
* if the range key is less than or equal to :rangeval.
* -
*
* rangeAttributeName > :rangeval - true if
* the range key is greater than :rangeval.
* -
*
* rangeAttributeName >=:rangeval - true
* if the range key is greater than or equal to :rangeval.
* -
*
* rangeAttributeName BETWEEN :rangeval1
* AND :rangeval2 - true if the range key is greater
* than or equal to :rangeval1, and less than or equal to
* :rangeval2.
* -
*
* begins_with (rangeAttributeName,
* :rangeval) - true if the range key begins with a
* particular operand. Note that the function name begins_with
* is case-sensitive.
*
*
* Use ExpressionAttributeValues (via {@link #withExpressionAttributeValues(Map)}) to
* replace tokens such as :hashval and :rangeval
* with actual values at runtime.
*
* You can optionally use ExpressionAttributeNames (via
* {@link #withExpressionAttributeNames(Map)}) to replace the names of the hash and range
* attributes with placeholder tokens. This might be necessary if an
* attribute name conflicts with a DynamoDB reserved word. For example, the
* following KeyConditionExpression causes an error because
* Size is a reserved word:
*
* -
Size = :myval
*
*
* To work around this, define a placeholder (such a #myval) to
* represent the attribute name Size. KeyConditionExpression
* then is as follows:
*
* -
#S =
* :myval
*
*
* For a list of reserved words, see Reserved Words in the Amazon DynamoDB Developer Guide.
*
* For more information on ExpressionAttributeNames and
* ExpressionAttributeValues, see Using Placeholders for Attribute Names and Values in the Amazon
* DynamoDB Developer Guide.
*
* KeyConditionExpression replaces the legacy KeyConditions
* parameter.
*
* @return The condition that specifies the key value(s) for items to be
* retrieved by the Query action.
*
* The condition must perform an equality test on a single hash key
* value. The condition can also test for one or more range key
* values. A Query can use KeyConditionExpression to
* retrieve a single item with a given hash and range key value, or
* several items that have the same hash key value but different
* range key values.
*
* The hash key equality test is required, and must be specified in
* the following format:
*
* hashAttributeName = :hashval
*
* If you also want to provide a range key condition, it must be
* combined using AND with the hash key condition. Following
* is an example, using the = comparison operator for the
* range key:
*
* hashAttributeName = :hashval
* AND rangeAttributeName =
* :rangeval
*
* Valid comparisons for the range key condition are as follows:
*
* -
*
* rangeAttributeName = :rangeval -
* true if the range key is equal to :rangeval.
* -
*
* rangeAttributeName < :rangeval -
* true if the range key is less than :rangeval.
* -
*
* rangeAttributeName <= :rangeval
* - true if the range key is less than or equal to
* :rangeval.
* -
*
* rangeAttributeName > :rangeval -
* true if the range key is greater than :rangeval.
* -
*
* rangeAttributeName >= :rangeval
* - true if the range key is greater than or equal to
* :rangeval.
* -
*
* rangeAttributeName BETWEEN
* :rangeval1 AND :rangeval2 - true
* if the range key is greater than or equal to
* :rangeval1, and less than or equal to
* :rangeval2.
* -
*
* begins_with (rangeAttributeName,
* :rangeval) - true if the range key begins
* with a particular operand. Note that the function name
* begins_with is case-sensitive.
*
*
* Use ExpressionAttributeValues (via
* {@link #withExpressionAttributeValues(Map)}) to replace tokens such as
* :hashval and :rangeval with actual
* values at runtime.
*
* You can optionally use ExpressionAttributeNames (via
* {@link #withExpressionAttributeNames(Map)}) to replace the names of the hash and
* range attributes with placeholder tokens. This might be necessary
* if an attribute name conflicts with a DynamoDB reserved word. For
* example, the following KeyConditionExpression causes an
* error because Size is a reserved word:
*
* -
Size = :myval
*
*
* To work around this, define a placeholder (such a
* #myval) to represent the attribute name Size.
* KeyConditionExpression then is as follows:
*
* -
#S =
* :myval
*
*
* For a list of reserved words, see Reserved Words in the Amazon DynamoDB Developer
* Guide.
*
* For more information on ExpressionAttributeNames and
* ExpressionAttributeValues, see Using Placeholders for Attribute Names and Values in the
* Amazon DynamoDB Developer Guide.
*
* KeyConditionExpression replaces the legacy
* KeyConditions parameter.
*/
public String getKeyConditionExpression() {
return keyConditionExpression;
}
/**
* Sets the condition that specifies the key value(s) for items to be
* retrieved by the Query action.
*
* The condition must perform an equality test on a single hash key value.
* The condition can also test for one or more range key values. A
* Query can use KeyConditionExpression to retrieve a single
* item with a given hash and range key value, or several items that have
* the same hash key value but different range key values.
*
* The hash key equality test is required, and must be specified in the
* following format:
*
* hashAttributeName = :hashval
*
* If you also want to provide a range key condition, it must be combined
* using AND with the hash key condition. Following is an example,
* using the = comparison operator for the range key:
*
* hashAttributeName = :hashval AND
* rangeAttributeName = :rangeval
*
* Valid comparisons for the range key condition are as follows:
*
* -
*
* rangeAttributeName = :rangeval - true if
* the range key is equal to :rangeval.
* -
*
* rangeAttributeName < :rangeval - true if
* the range key is less than :rangeval.
* -
*
* rangeAttributeName <= :rangeval - true
* if the range key is less than or equal to :rangeval.
* -
*
* rangeAttributeName > :rangeval - true if
* the range key is greater than :rangeval.
* -
*
* rangeAttributeName >= :rangeval - true
* if the range key is greater than or equal to :rangeval.
* -
*
* rangeAttributeName BETWEEN :rangeval1
* AND :rangeval2 - true if the range key is greater
* than or equal to :rangeval1, and less than or equal to
* :rangeval2.
* -
*
* begins_with (rangeAttributeName,
* :rangeval) - true if the range key begins with a
* particular operand. Note that the function name begins_with
* is case-sensitive.
*
*
* Use ExpressionAttributeValues (via {@link #withExpressionAttributeValues(Map)}) to
* replace tokens such as :hashval and :rangeval
* with actual values at runtime.
*
* You can optionally use ExpressionAttributeNames via
* {@link #withExpressionAttributeNames(Map)}) to replace the names of the hash and range
* attributes with placeholder tokens. This might be necessary if an
* attribute name conflicts with a DynamoDB reserved word. For example, the
* following KeyConditionExpression causes an error because
* Size is a reserved word:
*
* -
Size = :myval
*
*
* To work around this, define a placeholder (such a #myval) to
* represent the attribute name Size. KeyConditionExpression
* then is as follows:
*
* -
#S =
* :myval
*
*
* For a list of reserved words, see Reserved Words in the Amazon DynamoDB Developer Guide.
*
* For more information on ExpressionAttributeNames and
* ExpressionAttributeValues, see Using Placeholders for Attribute Names and Values in the Amazon
* DynamoDB Developer Guide.
*
* KeyConditionExpression replaces the legacy KeyConditions
* parameter.
*
* When a key expression is specified, the corresponding name-map and
* value-map can optionally be specified via {@link #withExpressionAttributeNames(Map)} and
* {@link #withExpressionAttributeValues(Map)}.
*/
public void setKeyConditionExpression(String keyConditionExpression) {
this.keyConditionExpression = keyConditionExpression;
}
public DynamoDBQueryExpression withKeyConditionExpression(
String keyConditionExpression) {
this.keyConditionExpression = keyConditionExpression;
return this;
}
/**
* One or more substitution variables for simplifying complex expressions.
*
* @return One or more substitution variables for simplifying complex
* expressions.
* @see QueryRequest#getExpressionAttributeNames()
*/
public java.util.Map getExpressionAttributeNames() {
return expressionAttributeNames;
}
/**
* One or more substitution variables for simplifying complex expressions.
*
* @param expressionAttributeNames
* One or more substitution variables for simplifying complex
* expressions.
* @see QueryRequest#setExpressionAttributeNames(Map)
*/
public void setExpressionAttributeNames(
java.util.Map expressionAttributeNames) {
this.expressionAttributeNames = expressionAttributeNames;
}
/**
* One or more substitution variables for simplifying complex expressions.
*
* @param expressionAttributeNames
* One or more substitution variables for simplifying complex
* expressions.
*
* @return A reference to this updated object so that method calls can be
* chained together.
* @see QueryRequest#withExpressionAttributeNames(Map)
*/
public DynamoDBQueryExpression withExpressionAttributeNames(
java.util.Map expressionAttributeNames) {
setExpressionAttributeNames(expressionAttributeNames);
return this;
}
/**
* One or more substitution variables for simplifying complex expressions.
* The method adds a new key-value pair into ExpressionAttributeNames
* parameter, and returns a reference to this object so that method calls
* can be chained together.
*
* @param key
* The key of the entry to be added into
* ExpressionAttributeNames.
* @param value
* The corresponding value of the entry to be added into
* ExpressionAttributeNames.
*
* @see QueryRequest#addExpressionAttributeNamesEntry(String, String)
*/
public DynamoDBQueryExpression addExpressionAttributeNamesEntry(
String key, String value) {
if (null == this.expressionAttributeNames) {
this.expressionAttributeNames = new java.util.HashMap();
}
if (this.expressionAttributeNames.containsKey(key))
throw new IllegalArgumentException("Duplicated keys ("
+ key.toString() + ") are provided.");
this.expressionAttributeNames.put(key, value);
return this;
}
/**
* Removes all the entries added into ExpressionAttributeNames.
*
* Returns a reference to this object so that method calls can be chained
* together.
*/
public DynamoDBQueryExpression clearExpressionAttributeNamesEntries() {
this.expressionAttributeNames = null;
return this;
}
/**
* One or more values that can be substituted in an expression.
*
* @return One or more values that can be substituted in an expression.
*
* @see QueryRequest#getExpressionAttributeValues()
*/
public java.util.Map getExpressionAttributeValues() {
return expressionAttributeValues;
}
/**
* One or more values that can be substituted in an expression.
*
* @param expressionAttributeValues
* One or more values that can be substituted in an expression.
*
* @see QueryRequest#setExpressionAttributeValues(Map)
*/
public void setExpressionAttributeValues(
java.util.Map expressionAttributeValues) {
this.expressionAttributeValues = expressionAttributeValues;
}
/**
* One or more values that can be substituted in an expression.
*
* @param expressionAttributeValues
* One or more values that can be substituted in an expression.
*
* @return A reference to this updated object so that method calls can be
* chained together.
* @see QueryRequest#withExpressionAttributeValues(Map)
*/
public DynamoDBQueryExpression withExpressionAttributeValues(
java.util.Map expressionAttributeValues) {
setExpressionAttributeValues(expressionAttributeValues);
return this;
}
/**
* One or more values that can be substituted in an expression. The method
* adds a new key-value pair into ExpressionAttributeValues parameter, and
* returns a reference to this object so that method calls can be chained
* together.
*
* @param key
* The key of the entry to be added into
* ExpressionAttributeValues.
* @param value
* The corresponding value of the entry to be added into
* ExpressionAttributeValues.
*
* @see QueryRequest#addExpressionAttributeValuesEntry(String,
* AttributeValue)
*/
public DynamoDBQueryExpression addExpressionAttributeValuesEntry(
String key, AttributeValue value) {
if (null == this.expressionAttributeValues) {
this.expressionAttributeValues = new java.util.HashMap();
}
if (this.expressionAttributeValues.containsKey(key))
throw new IllegalArgumentException("Duplicated keys ("
+ key.toString() + ") are provided.");
this.expressionAttributeValues.put(key, value);
return this;
}
/**
* Removes all the entries added into ExpressionAttributeValues.
*
* Returns a reference to this object so that method calls can be chained
* together.
*/
public DynamoDBQueryExpression clearExpressionAttributeValuesEntries() {
this.expressionAttributeValues = null;
return this;
}
/**
* The attributes to be returned in the result. You can retrieve all item
* attributes, specific item attributes, the count of matching items, or
* in the case of an index, some or all of the attributes projected into
* the index.
*
* Constraints:
* Allowed Values: ALL_ATTRIBUTES, ALL_PROJECTED_ATTRIBUTES, SPECIFIC_ATTRIBUTES, COUNT
*
* @return The attributes to be returned in the result. You can retrieve all item
* attributes, specific item attributes, the count of matching items, or
* in the case of an index, some or all of the attributes projected into
* the index.
*
* @see com.amazonaws.services.dynamodbv2.model.Select
*/
public String getSelect() {
return select;
}
/**
* The attributes to be returned in the result. You can retrieve all item
* attributes, specific item attributes, the count of matching items, or
* in the case of an index, some or all of the attributes projected into
* the index.
*
* Constraints:
* Allowed Values: ALL_ATTRIBUTES, ALL_PROJECTED_ATTRIBUTES, SPECIFIC_ATTRIBUTES, COUNT
*
* @param select The attributes to be returned in the result. You can retrieve all item
* attributes, specific item attributes, the count of matching items, or
* in the case of an index, some or all of the attributes projected into
* the index.
*
* @see com.amazonaws.services.dynamodbv2.model.Select
*/
public void setSelect(String select) {
this.select = select;
}
/**
* The attributes to be returned in the result. You can retrieve all item
* attributes, specific item attributes, the count of matching items, or
* in the case of an index, some or all of the attributes projected into
* the index.
*
* Returns a reference to this object so that method calls can be chained together.
*
* Constraints:
* Allowed Values: ALL_ATTRIBUTES, ALL_PROJECTED_ATTRIBUTES, SPECIFIC_ATTRIBUTES, COUNT
*
* @param select The attributes to be returned in the result. You can retrieve all item
* attributes, specific item attributes, the count of matching items, or
* in the case of an index, some or all of the attributes projected into
* the index.
*
* @return A reference to this updated object so that method calls can be chained
* together.
*
* @see com.amazonaws.services.dynamodbv2.model.Select
*/
public DynamoDBQueryExpression withSelect(String select) {
this.select = select;
return this;
}
/**
* The attributes to be returned in the result. You can retrieve all item
* attributes, specific item attributes, the count of matching items, or
* in the case of an index, some or all of the attributes projected into
* the index.
*
* Constraints:
* Allowed Values: ALL_ATTRIBUTES, ALL_PROJECTED_ATTRIBUTES, SPECIFIC_ATTRIBUTES, COUNT
*
* @param select The attributes to be returned in the result. You can retrieve all item
* attributes, specific item attributes, the count of matching items, or
* in the case of an index, some or all of the attributes projected into
* the index.
*
* @see com.amazonaws.services.dynamodbv2.model.Select
*/
public void setSelect(Select select) {
this.select = select.toString();
}
/**
* The attributes to be returned in the result. You can retrieve all item
* attributes, specific item attributes, the count of matching items, or
* in the case of an index, some or all of the attributes projected into
* the index.
*
* Returns a reference to this object so that method calls can be chained together.
*
* Constraints:
* Allowed Values: ALL_ATTRIBUTES, ALL_PROJECTED_ATTRIBUTES, SPECIFIC_ATTRIBUTES, COUNT
*
* @param select The attributes to be returned in the result. You can retrieve all item
* attributes, specific item attributes, the count of matching items, or
* in the case of an index, some or all of the attributes projected into
* the index.
*
* @return A reference to this updated object so that method calls can be chained
* together.
*
* @see com.amazonaws.services.dynamodbv2.model.Select
*/
public DynamoDBQueryExpression withSelect(Select select) {
this.select = select.toString();
return this;
}
/**
* A string that identifies one or more attributes to retrieve from the
* table. These attributes can include scalars, sets, or elements of a
* JSON document. The attributes in the expression must be separated by
* commas. If no attribute names are specified, then all attributes
* will be returned. If any of the requested attributes are not found,
* they will not appear in the result.
For more information, go to Accessing
* Item Attributes in the Amazon DynamoDB Developer Guide.
*
* @return A string that identifies one or more attributes to retrieve from the
* table. These attributes can include scalars, sets, or elements of a
* JSON document. The attributes in the expression must be separated by
* commas.
If no attribute names are specified, then all attributes
* will be returned. If any of the requested attributes are not found,
* they will not appear in the result.
For more information, go to Accessing
* Item Attributes in the Amazon DynamoDB Developer Guide.
*/
public String getProjectionExpression() {
return projectionExpression;
}
/**
* A string that identifies one or more attributes to retrieve from the
* table. These attributes can include scalars, sets, or elements of a
* JSON document. The attributes in the expression must be separated by
* commas.
If no attribute names are specified, then all attributes
* will be returned. If any of the requested attributes are not found,
* they will not appear in the result.
For more information, go to Accessing
* Item Attributes in the Amazon DynamoDB Developer Guide.
*
* @param projectionExpression A string that identifies one or more attributes to retrieve from the
* table. These attributes can include scalars, sets, or elements of a
* JSON document. The attributes in the expression must be separated by
* commas.
If no attribute names are specified, then all attributes
* will be returned. If any of the requested attributes are not found,
* they will not appear in the result.
For more information, go to Accessing
* Item Attributes in the Amazon DynamoDB Developer Guide.
*/
public void setProjectionExpression(String projectionExpression) {
this.projectionExpression = projectionExpression;
}
/**
* A string that identifies one or more attributes to retrieve from the
* table. These attributes can include scalars, sets, or elements of a
* JSON document. The attributes in the expression must be separated by
* commas.
If no attribute names are specified, then all attributes
* will be returned. If any of the requested attributes are not found,
* they will not appear in the result.
For more information, go to Accessing
* Item Attributes in the Amazon DynamoDB Developer Guide.
*
* Returns a reference to this object so that method calls can be chained together.
*
* @param projectionExpression A string that identifies one or more attributes to retrieve from the
* table. These attributes can include scalars, sets, or elements of a
* JSON document. The attributes in the expression must be separated by
* commas.
If no attribute names are specified, then all attributes
* will be returned. If any of the requested attributes are not found,
* they will not appear in the result.
For more information, go to Accessing
* Item Attributes in the Amazon DynamoDB Developer Guide.
*
* @return A reference to this updated object so that method calls can be chained
* together.
*/
public DynamoDBQueryExpression withProjectionExpression(String projectionExpression) {
this.projectionExpression = projectionExpression;
return this;
}
/**
* A value that if set to TOTAL, the response includes
* ConsumedCapacity data for tables and indexes. If set to
* INDEXES, the response includes ConsumedCapacity
* for indexes. If set to NONE (the default),
* ConsumedCapacity is not included in the response.
*
* Constraints:
* Allowed Values: INDEXES, TOTAL, NONE
*
* If enabled, the underlying request to DynamoDB will include the
* configured parameter value and the low-level response from DynamoDB will
* include the amount of capacity consumed by the query. Currently, the
* consumed capacity is only exposed through the DynamoDBMapper when you
* call {@code DynamoDBMapper.queryPage}, not {@code DynamoDBMapper.query}.
*
* @return A value that if set to TOTAL, the response includes
* ConsumedCapacity data for tables and indexes. If set to
* INDEXES, the response includes ConsumedCapacity
* for indexes. If set to NONE (the default),
* ConsumedCapacity is not included in the response.
*
* @see com.amazonaws.services.dynamodbv2.model.ReturnConsumedCapacity
*/
public String getReturnConsumedCapacity() {
return returnConsumedCapacity;
}
/**
* A value that if set to TOTAL, the response includes
* ConsumedCapacity data for tables and indexes. If set to
* INDEXES, the response includes ConsumedCapacity
* for indexes. If set to NONE (the default),
* ConsumedCapacity is not included in the response.
*
* Constraints:
* Allowed Values: INDEXES, TOTAL, NONE
*
* If enabled, the underlying request to DynamoDB will include the
* configured parameter value and the low-level response from DynamoDB will
* include the amount of capacity consumed by the query. Currently, the
* consumed capacity is only exposed through the DynamoDBMapper when you
* call {@code DynamoDBMapper.queryPage}, not {@code DynamoDBMapper.query}.
*
* @param returnConsumedCapacity A value that if set to TOTAL, the response includes
* ConsumedCapacity data for tables and indexes. If set to
* INDEXES, the response includes ConsumedCapacity
* for indexes. If set to NONE (the default),
* ConsumedCapacity is not included in the response.
*
* @see com.amazonaws.services.dynamodbv2.model.ReturnConsumedCapacity
*/
public void setReturnConsumedCapacity(String returnConsumedCapacity) {
this.returnConsumedCapacity = returnConsumedCapacity;
}
/**
* A value that if set to TOTAL, the response includes
* ConsumedCapacity data for tables and indexes. If set to
* INDEXES, the response includes ConsumedCapacity
* for indexes. If set to NONE (the default),
* ConsumedCapacity is not included in the response.
*
* Returns a reference to this object so that method calls can be chained together.
*
* Constraints:
* Allowed Values: INDEXES, TOTAL, NONE
*
* If enabled, the underlying request to DynamoDB will include the
* configured parameter value and the low-level response from DynamoDB will
* include the amount of capacity consumed by the query. Currently, the
* consumed capacity is only exposed through the DynamoDBMapper when you
* call {@code DynamoDBMapper.queryPage}, not {@code DynamoDBMapper.query}.
*
* @param returnConsumedCapacity A value that if set to TOTAL, the response includes
* ConsumedCapacity data for tables and indexes. If set to
* INDEXES, the response includes ConsumedCapacity
* for indexes. If set to NONE (the default),
* ConsumedCapacity is not included in the response.
*
* @return A reference to this updated object so that method calls can be chained
* together.
*
* @see com.amazonaws.services.dynamodbv2.model.ReturnConsumedCapacity
*/
public DynamoDBQueryExpression withReturnConsumedCapacity(String returnConsumedCapacity) {
this.returnConsumedCapacity = returnConsumedCapacity;
return this;
}
/**
* A value that if set to TOTAL, the response includes
* ConsumedCapacity data for tables and indexes. If set to
* INDEXES, the response includes ConsumedCapacity
* for indexes. If set to NONE (the default),
* ConsumedCapacity is not included in the response.
*
* Constraints:
* Allowed Values: INDEXES, TOTAL, NONE
*
* If enabled, the underlying request to DynamoDB will include the
* configured parameter value and the low-level response from DynamoDB will
* include the amount of capacity consumed by the query. Currently, the
* consumed capacity is only exposed through the DynamoDBMapper when you
* call {@code DynamoDBMapper.queryPage}, not {@code DynamoDBMapper.query}.
*
* @param returnConsumedCapacity A value that if set to TOTAL, the response includes
* ConsumedCapacity data for tables and indexes. If set to
* INDEXES, the response includes ConsumedCapacity
* for indexes. If set to NONE (the default),
* ConsumedCapacity is not included in the response.
*
* @see com.amazonaws.services.dynamodbv2.model.ReturnConsumedCapacity
*/
public void setReturnConsumedCapacity(ReturnConsumedCapacity returnConsumedCapacity) {
this.returnConsumedCapacity = returnConsumedCapacity.toString();
}
/**
* A value that if set to TOTAL, the response includes
* ConsumedCapacity data for tables and indexes. If set to
* INDEXES, the response includes ConsumedCapacity
* for indexes. If set to NONE (the default),
* ConsumedCapacity is not included in the response.
*
* Returns a reference to this object so that method calls can be chained together.
*
* Constraints:
* Allowed Values: INDEXES, TOTAL, NONE
*
* If enabled, the underlying request to DynamoDB will include the
* configured parameter value and the low-level response from DynamoDB will
* include the amount of capacity consumed by the query. Currently, the
* consumed capacity is only exposed through the DynamoDBMapper when you
* call {@code DynamoDBMapper.queryPage}, not {@code DynamoDBMapper.query}.
*
* @param returnConsumedCapacity A value that if set to TOTAL, the response includes
* ConsumedCapacity data for tables and indexes. If set to
* INDEXES, the response includes ConsumedCapacity
* for indexes. If set to NONE (the default),
* ConsumedCapacity is not included in the response.
*
* @return A reference to this updated object so that method calls can be chained
* together.
*
* @see com.amazonaws.services.dynamodbv2.model.ReturnConsumedCapacity
*/
public DynamoDBQueryExpression withReturnConsumedCapacity(ReturnConsumedCapacity returnConsumedCapacity) {
this.returnConsumedCapacity = returnConsumedCapacity.toString();
return this;
}
}