com.amazonaws.services.ecs.model.LogConfiguration Maven / Gradle / Ivy
/*
* Copyright 2016-2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with
* the License. A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions
* and limitations under the License.
*/
package com.amazonaws.services.ecs.model;
import java.io.Serializable;
import javax.annotation.Generated;
import com.amazonaws.protocol.StructuredPojo;
import com.amazonaws.protocol.ProtocolMarshaller;
/**
*
* The log configuration for the container. This parameter maps to LogConfig in the Create a container section of the Docker Remote API and the --log-driver option to docker run .
*
*
* By default, containers use the same logging driver that the Docker daemon uses; however the container may use a
* different logging driver than the Docker daemon by specifying a log driver configuration in the container definition.
* For more information on the options for different supported log drivers, see Configure logging drivers in the Docker
* documentation.
*
*
* The following should be noted when specifying a log configuration for your containers:
*
*
* -
*
* Amazon ECS currently supports a subset of the logging drivers available to the Docker daemon (shown in the valid
* values below). Additional log drivers may be available in future releases of the Amazon ECS container agent.
*
*
* -
*
* This parameter requires version 1.18 of the Docker Remote API or greater on your container instance.
*
*
* -
*
* For tasks hosted on Amazon EC2 instances, the Amazon ECS container agent must register the available logging drivers
* with the ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on that instance
* can use these log configuration options. For more information, see Amazon ECS container agent
* configuration in the Amazon Elastic Container Service Developer Guide.
*
*
* -
*
* For tasks on AWS Fargate, because you do not have access to the underlying infrastructure your tasks are hosted on,
* any additional software needed will have to be installed outside of the task. For example, the Fluentd output
* aggregators or a remote host running Logstash to send Gelf logs to.
*
*
*
*
* @see AWS API
* Documentation
*/
@Generated("com.amazonaws:aws-java-sdk-code-generator")
public class LogConfiguration implements Serializable, Cloneable, StructuredPojo {
/**
*
* The log driver to use for the container.
*
*
* For tasks on AWS Fargate, the supported log drivers are awslogs, splunk, and
* awsfirelens.
*
*
* For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs,
* fluentd, gelf, json-file, journald, logentries,
* syslog, splunk, and awsfirelens.
*
*
* For more information about using the awslogs log driver, see Using the awslogs log
* driver in the Amazon Elastic Container Service Developer Guide.
*
*
* For more information about using the awsfirelens log driver, see Custom log routing in
* the Amazon Elastic Container Service Developer Guide.
*
*
*
* If you have a custom driver that is not listed, you can fork the Amazon ECS container agent project that is available on GitHub and customize it to work with that driver.
* We encourage you to submit pull requests for changes that you would like to have included. However, we do not
* currently provide support for running modified copies of this software.
*
*
*/
private String logDriver;
/**
*
* The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker Remote
* API or greater on your container instance. To check the Docker Remote API version on your container instance, log
* in to your container instance and run the following command:
* sudo docker version --format '{{.Server.APIVersion}}'
*
*/
private java.util.Map options;
/**
*
* The secrets to pass to the log configuration. For more information, see Specifying
* Sensitive Data in the Amazon Elastic Container Service Developer Guide.
*
*/
private com.amazonaws.internal.SdkInternalList secretOptions;
/**
*
* The log driver to use for the container.
*
*
* For tasks on AWS Fargate, the supported log drivers are awslogs, splunk, and
* awsfirelens.
*
*
* For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs,
* fluentd, gelf, json-file, journald, logentries,
* syslog, splunk, and awsfirelens.
*
*
* For more information about using the awslogs log driver, see Using the awslogs log
* driver in the Amazon Elastic Container Service Developer Guide.
*
*
* For more information about using the awsfirelens log driver, see Custom log routing in
* the Amazon Elastic Container Service Developer Guide.
*
*
*
* If you have a custom driver that is not listed, you can fork the Amazon ECS container agent project that is available on GitHub and customize it to work with that driver.
* We encourage you to submit pull requests for changes that you would like to have included. However, we do not
* currently provide support for running modified copies of this software.
*
*
*
* @param logDriver
* The log driver to use for the container.
*
* For tasks on AWS Fargate, the supported log drivers are awslogs, splunk, and
* awsfirelens.
*
*
* For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs,
* fluentd, gelf, json-file, journald,
* logentries,syslog, splunk, and awsfirelens.
*
*
* For more information about using the awslogs log driver, see Using the awslogs
* log driver in the Amazon Elastic Container Service Developer Guide.
*
*
* For more information about using the awsfirelens log driver, see Custom log
* routing in the Amazon Elastic Container Service Developer Guide.
*
*
*
* If you have a custom driver that is not listed, you can fork the Amazon ECS container agent project that
* is available on GitHub and customize it to work with
* that driver. We encourage you to submit pull requests for changes that you would like to have included.
* However, we do not currently provide support for running modified copies of this software.
*
* @see LogDriver
*/
public void setLogDriver(String logDriver) {
this.logDriver = logDriver;
}
/**
*
* The log driver to use for the container.
*
*
* For tasks on AWS Fargate, the supported log drivers are awslogs, splunk, and
* awsfirelens.
*
*
* For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs,
* fluentd, gelf, json-file, journald, logentries,
* syslog, splunk, and awsfirelens.
*
*
* For more information about using the awslogs log driver, see Using the awslogs log
* driver in the Amazon Elastic Container Service Developer Guide.
*
*
* For more information about using the awsfirelens log driver, see Custom log routing in
* the Amazon Elastic Container Service Developer Guide.
*
*
*
* If you have a custom driver that is not listed, you can fork the Amazon ECS container agent project that is available on GitHub and customize it to work with that driver.
* We encourage you to submit pull requests for changes that you would like to have included. However, we do not
* currently provide support for running modified copies of this software.
*
*
*
* @return The log driver to use for the container.
*
* For tasks on AWS Fargate, the supported log drivers are awslogs, splunk, and
* awsfirelens.
*
*
* For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs,
* fluentd, gelf, json-file, journald,
* logentries,syslog, splunk, and awsfirelens.
*
*
* For more information about using the awslogs log driver, see Using the awslogs
* log driver in the Amazon Elastic Container Service Developer Guide.
*
*
* For more information about using the awsfirelens log driver, see Custom log
* routing in the Amazon Elastic Container Service Developer Guide.
*
*
*
* If you have a custom driver that is not listed, you can fork the Amazon ECS container agent project that
* is available on GitHub and customize it to work
* with that driver. We encourage you to submit pull requests for changes that you would like to have
* included. However, we do not currently provide support for running modified copies of this software.
*
* @see LogDriver
*/
public String getLogDriver() {
return this.logDriver;
}
/**
*
* The log driver to use for the container.
*
*
* For tasks on AWS Fargate, the supported log drivers are awslogs, splunk, and
* awsfirelens.
*
*
* For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs,
* fluentd, gelf, json-file, journald, logentries,
* syslog, splunk, and awsfirelens.
*
*
* For more information about using the awslogs log driver, see Using the awslogs log
* driver in the Amazon Elastic Container Service Developer Guide.
*
*
* For more information about using the awsfirelens log driver, see Custom log routing in
* the Amazon Elastic Container Service Developer Guide.
*
*
*
* If you have a custom driver that is not listed, you can fork the Amazon ECS container agent project that is available on GitHub and customize it to work with that driver.
* We encourage you to submit pull requests for changes that you would like to have included. However, we do not
* currently provide support for running modified copies of this software.
*
*
*
* @param logDriver
* The log driver to use for the container.
*
* For tasks on AWS Fargate, the supported log drivers are awslogs, splunk, and
* awsfirelens.
*
*
* For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs,
* fluentd, gelf, json-file, journald,
* logentries,syslog, splunk, and awsfirelens.
*
*
* For more information about using the awslogs log driver, see Using the awslogs
* log driver in the Amazon Elastic Container Service Developer Guide.
*
*
* For more information about using the awsfirelens log driver, see Custom log
* routing in the Amazon Elastic Container Service Developer Guide.
*
*
*
* If you have a custom driver that is not listed, you can fork the Amazon ECS container agent project that
* is available on GitHub and customize it to work with
* that driver. We encourage you to submit pull requests for changes that you would like to have included.
* However, we do not currently provide support for running modified copies of this software.
*
* @return Returns a reference to this object so that method calls can be chained together.
* @see LogDriver
*/
public LogConfiguration withLogDriver(String logDriver) {
setLogDriver(logDriver);
return this;
}
/**
*
* The log driver to use for the container.
*
*
* For tasks on AWS Fargate, the supported log drivers are awslogs, splunk, and
* awsfirelens.
*
*
* For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs,
* fluentd, gelf, json-file, journald, logentries,
* syslog, splunk, and awsfirelens.
*
*
* For more information about using the awslogs log driver, see Using the awslogs log
* driver in the Amazon Elastic Container Service Developer Guide.
*
*
* For more information about using the awsfirelens log driver, see Custom log routing in
* the Amazon Elastic Container Service Developer Guide.
*
*
*
* If you have a custom driver that is not listed, you can fork the Amazon ECS container agent project that is available on GitHub and customize it to work with that driver.
* We encourage you to submit pull requests for changes that you would like to have included. However, we do not
* currently provide support for running modified copies of this software.
*
*
*
* @param logDriver
* The log driver to use for the container.
*
* For tasks on AWS Fargate, the supported log drivers are awslogs, splunk, and
* awsfirelens.
*
*
* For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs,
* fluentd, gelf, json-file, journald,
* logentries,syslog, splunk, and awsfirelens.
*
*
* For more information about using the awslogs log driver, see Using the awslogs
* log driver in the Amazon Elastic Container Service Developer Guide.
*
*
* For more information about using the awsfirelens log driver, see Custom log
* routing in the Amazon Elastic Container Service Developer Guide.
*
*
*
* If you have a custom driver that is not listed, you can fork the Amazon ECS container agent project that
* is available on GitHub and customize it to work with
* that driver. We encourage you to submit pull requests for changes that you would like to have included.
* However, we do not currently provide support for running modified copies of this software.
*
* @see LogDriver
*/
public void setLogDriver(LogDriver logDriver) {
withLogDriver(logDriver);
}
/**
*
* The log driver to use for the container.
*
*
* For tasks on AWS Fargate, the supported log drivers are awslogs, splunk, and
* awsfirelens.
*
*
* For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs,
* fluentd, gelf, json-file, journald, logentries,
* syslog, splunk, and awsfirelens.
*
*
* For more information about using the awslogs log driver, see Using the awslogs log
* driver in the Amazon Elastic Container Service Developer Guide.
*
*
* For more information about using the awsfirelens log driver, see Custom log routing in
* the Amazon Elastic Container Service Developer Guide.
*
*
*
* If you have a custom driver that is not listed, you can fork the Amazon ECS container agent project that is available on GitHub and customize it to work with that driver.
* We encourage you to submit pull requests for changes that you would like to have included. However, we do not
* currently provide support for running modified copies of this software.
*
*
*
* @param logDriver
* The log driver to use for the container.
*
* For tasks on AWS Fargate, the supported log drivers are awslogs, splunk, and
* awsfirelens.
*
*
* For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs,
* fluentd, gelf, json-file, journald,
* logentries,syslog, splunk, and awsfirelens.
*
*
* For more information about using the awslogs log driver, see Using the awslogs
* log driver in the Amazon Elastic Container Service Developer Guide.
*
*
* For more information about using the awsfirelens log driver, see Custom log
* routing in the Amazon Elastic Container Service Developer Guide.
*
*
*
* If you have a custom driver that is not listed, you can fork the Amazon ECS container agent project that
* is available on GitHub and customize it to work with
* that driver. We encourage you to submit pull requests for changes that you would like to have included.
* However, we do not currently provide support for running modified copies of this software.
*
* @return Returns a reference to this object so that method calls can be chained together.
* @see LogDriver
*/
public LogConfiguration withLogDriver(LogDriver logDriver) {
this.logDriver = logDriver.toString();
return this;
}
/**
*
* The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker Remote
* API or greater on your container instance. To check the Docker Remote API version on your container instance, log
* in to your container instance and run the following command:
* sudo docker version --format '{{.Server.APIVersion}}'
*
*
* @return The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker
* Remote API or greater on your container instance. To check the Docker Remote API version on your
* container instance, log in to your container instance and run the following command:
* sudo docker version --format '{{.Server.APIVersion}}'
*/
public java.util.Map getOptions() {
return options;
}
/**
*
* The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker Remote
* API or greater on your container instance. To check the Docker Remote API version on your container instance, log
* in to your container instance and run the following command:
* sudo docker version --format '{{.Server.APIVersion}}'
*
*
* @param options
* The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker
* Remote API or greater on your container instance. To check the Docker Remote API version on your container
* instance, log in to your container instance and run the following command:
* sudo docker version --format '{{.Server.APIVersion}}'
*/
public void setOptions(java.util.Map options) {
this.options = options;
}
/**
*
* The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker Remote
* API or greater on your container instance. To check the Docker Remote API version on your container instance, log
* in to your container instance and run the following command:
* sudo docker version --format '{{.Server.APIVersion}}'
*
*
* @param options
* The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker
* Remote API or greater on your container instance. To check the Docker Remote API version on your container
* instance, log in to your container instance and run the following command:
* sudo docker version --format '{{.Server.APIVersion}}'
* @return Returns a reference to this object so that method calls can be chained together.
*/
public LogConfiguration withOptions(java.util.Map options) {
setOptions(options);
return this;
}
/**
* Add a single Options entry
*
* @see LogConfiguration#withOptions
* @returns a reference to this object so that method calls can be chained together.
*/
public LogConfiguration addOptionsEntry(String key, String value) {
if (null == this.options) {
this.options = new java.util.HashMap();
}
if (this.options.containsKey(key))
throw new IllegalArgumentException("Duplicated keys (" + key.toString() + ") are provided.");
this.options.put(key, value);
return this;
}
/**
* Removes all the entries added into Options.
*
* @return Returns a reference to this object so that method calls can be chained together.
*/
public LogConfiguration clearOptionsEntries() {
this.options = null;
return this;
}
/**
*
* The secrets to pass to the log configuration. For more information, see Specifying
* Sensitive Data in the Amazon Elastic Container Service Developer Guide.
*
*
* @return The secrets to pass to the log configuration. For more information, see Specifying Sensitive Data in the Amazon Elastic Container Service Developer Guide.
*/
public java.util.List getSecretOptions() {
if (secretOptions == null) {
secretOptions = new com.amazonaws.internal.SdkInternalList();
}
return secretOptions;
}
/**
*
* The secrets to pass to the log configuration. For more information, see Specifying
* Sensitive Data in the Amazon Elastic Container Service Developer Guide.
*
*
* @param secretOptions
* The secrets to pass to the log configuration. For more information, see Specifying Sensitive Data in the Amazon Elastic Container Service Developer Guide.
*/
public void setSecretOptions(java.util.Collection secretOptions) {
if (secretOptions == null) {
this.secretOptions = null;
return;
}
this.secretOptions = new com.amazonaws.internal.SdkInternalList(secretOptions);
}
/**
*
* The secrets to pass to the log configuration. For more information, see Specifying
* Sensitive Data in the Amazon Elastic Container Service Developer Guide.
*
*
* NOTE: This method appends the values to the existing list (if any). Use
* {@link #setSecretOptions(java.util.Collection)} or {@link #withSecretOptions(java.util.Collection)} if you want
* to override the existing values.
*
*
* @param secretOptions
* The secrets to pass to the log configuration. For more information, see Specifying Sensitive Data in the Amazon Elastic Container Service Developer Guide.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public LogConfiguration withSecretOptions(Secret... secretOptions) {
if (this.secretOptions == null) {
setSecretOptions(new com.amazonaws.internal.SdkInternalList(secretOptions.length));
}
for (Secret ele : secretOptions) {
this.secretOptions.add(ele);
}
return this;
}
/**
*
* The secrets to pass to the log configuration. For more information, see Specifying
* Sensitive Data in the Amazon Elastic Container Service Developer Guide.
*
*
* @param secretOptions
* The secrets to pass to the log configuration. For more information, see Specifying Sensitive Data in the Amazon Elastic Container Service Developer Guide.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public LogConfiguration withSecretOptions(java.util.Collection secretOptions) {
setSecretOptions(secretOptions);
return this;
}
/**
* Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be
* redacted from this string using a placeholder value.
*
* @return A string representation of this object.
*
* @see java.lang.Object#toString()
*/
@Override
public String toString() {
StringBuilder sb = new StringBuilder();
sb.append("{");
if (getLogDriver() != null)
sb.append("LogDriver: ").append(getLogDriver()).append(",");
if (getOptions() != null)
sb.append("Options: ").append(getOptions()).append(",");
if (getSecretOptions() != null)
sb.append("SecretOptions: ").append(getSecretOptions());
sb.append("}");
return sb.toString();
}
@Override
public boolean equals(Object obj) {
if (this == obj)
return true;
if (obj == null)
return false;
if (obj instanceof LogConfiguration == false)
return false;
LogConfiguration other = (LogConfiguration) obj;
if (other.getLogDriver() == null ^ this.getLogDriver() == null)
return false;
if (other.getLogDriver() != null && other.getLogDriver().equals(this.getLogDriver()) == false)
return false;
if (other.getOptions() == null ^ this.getOptions() == null)
return false;
if (other.getOptions() != null && other.getOptions().equals(this.getOptions()) == false)
return false;
if (other.getSecretOptions() == null ^ this.getSecretOptions() == null)
return false;
if (other.getSecretOptions() != null && other.getSecretOptions().equals(this.getSecretOptions()) == false)
return false;
return true;
}
@Override
public int hashCode() {
final int prime = 31;
int hashCode = 1;
hashCode = prime * hashCode + ((getLogDriver() == null) ? 0 : getLogDriver().hashCode());
hashCode = prime * hashCode + ((getOptions() == null) ? 0 : getOptions().hashCode());
hashCode = prime * hashCode + ((getSecretOptions() == null) ? 0 : getSecretOptions().hashCode());
return hashCode;
}
@Override
public LogConfiguration clone() {
try {
return (LogConfiguration) super.clone();
} catch (CloneNotSupportedException e) {
throw new IllegalStateException("Got a CloneNotSupportedException from Object.clone() " + "even though we're Cloneable!", e);
}
}
@com.amazonaws.annotation.SdkInternalApi
@Override
public void marshall(ProtocolMarshaller protocolMarshaller) {
com.amazonaws.services.ecs.model.transform.LogConfigurationMarshaller.getInstance().marshall(this, protocolMarshaller);
}
}