com.amazonaws.services.glacier.AmazonGlacierClient Maven / Gradle / Ivy
Show all versions of aws-java-sdk-glacier Show documentation
/*
* Copyright 2011-2016 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with
* the License. A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions
* and limitations under the License.
*/
package com.amazonaws.services.glacier;
import org.w3c.dom.*;
import java.net.*;
import java.util.*;
import java.util.Map.Entry;
import org.apache.commons.logging.*;
import com.amazonaws.*;
import com.amazonaws.auth.*;
import com.amazonaws.handlers.*;
import com.amazonaws.http.*;
import com.amazonaws.internal.*;
import com.amazonaws.internal.auth.*;
import com.amazonaws.metrics.*;
import com.amazonaws.regions.*;
import com.amazonaws.transform.*;
import com.amazonaws.util.*;
import com.amazonaws.protocol.json.*;
import com.amazonaws.util.AWSRequestMetrics.Field;
import com.amazonaws.annotation.ThreadSafe;
import com.amazonaws.client.AwsSyncClientParams;
import com.amazonaws.services.glacier.waiters.AmazonGlacierWaiters;
import com.amazonaws.AmazonServiceException;
import com.amazonaws.services.glacier.model.*;
import com.amazonaws.services.glacier.model.transform.*;
/**
* Client for accessing Amazon Glacier. All service calls made using this client are blocking, and will not return until
* the service call completes.
*
*
* Amazon Glacier is a storage solution for "cold data."
*
*
* Amazon Glacier is an extremely low-cost storage service that provides secure, durable, and easy-to-use storage for
* data backup and archival. With Amazon Glacier, customers can store their data cost effectively for months, years, or
* decades. Amazon Glacier also enables customers to offload the administrative burdens of operating and scaling storage
* to AWS, so they don't have to worry about capacity planning, hardware provisioning, data replication, hardware
* failure and recovery, or time-consuming hardware migrations.
*
*
* Amazon Glacier is a great storage choice when low storage cost is paramount, your data is rarely retrieved, and
* retrieval latency of several hours is acceptable. If your application requires fast or frequent access to your data,
* consider using Amazon S3. For more information, go to Amazon Simple Storage
* Service (Amazon S3).
*
*
* You can store any kind of data in any format. There is no maximum limit on the total amount of data you can store in
* Amazon Glacier.
*
*
* If you are a first-time user of Amazon Glacier, we recommend that you begin by reading the following sections in the
* Amazon Glacier Developer Guide:
*
*
* -
*
* What is Amazon Glacier - This
* section of the Developer Guide describes the underlying data model, the operations it supports, and the AWS SDKs that
* you can use to interact with the service.
*
*
* -
*
* Getting Started
* with Amazon Glacier - The Getting Started section walks you through the process of creating a vault, uploading
* archives, creating jobs to download archives, retrieving the job output, and deleting archives.
*
*
*
*/
@ThreadSafe
public class AmazonGlacierClient extends AmazonWebServiceClient implements AmazonGlacier {
/** Provider for AWS credentials. */
private final AWSCredentialsProvider awsCredentialsProvider;
private static final Log log = LogFactory.getLog(AmazonGlacier.class);
/** Default signing name for the service. */
private static final String DEFAULT_SIGNING_NAME = "glacier";
private volatile AmazonGlacierWaiters waiters;
/** Client configuration factory providing ClientConfigurations tailored to this client */
protected static final ClientConfigurationFactory configFactory = new ClientConfigurationFactory();
private final SdkJsonProtocolFactory protocolFactory = new SdkJsonProtocolFactory(new JsonClientMetadata()
.withProtocolVersion("1.1")
.withSupportsCbor(false)
.withSupportsIon(false)
.withContentTypeOverride("")
.addErrorMetadata(
new JsonErrorShapeMetadata().withErrorCode("RequestTimeoutException").withModeledClass(
com.amazonaws.services.glacier.model.RequestTimeoutException.class))
.addErrorMetadata(
new JsonErrorShapeMetadata().withErrorCode("MissingParameterValueException").withModeledClass(
com.amazonaws.services.glacier.model.MissingParameterValueException.class))
.addErrorMetadata(
new JsonErrorShapeMetadata().withErrorCode("InvalidParameterValueException").withModeledClass(
com.amazonaws.services.glacier.model.InvalidParameterValueException.class))
.addErrorMetadata(
new JsonErrorShapeMetadata().withErrorCode("ResourceNotFoundException").withModeledClass(
com.amazonaws.services.glacier.model.ResourceNotFoundException.class))
.addErrorMetadata(
new JsonErrorShapeMetadata().withErrorCode("ServiceUnavailableException").withModeledClass(
com.amazonaws.services.glacier.model.ServiceUnavailableException.class))
.addErrorMetadata(
new JsonErrorShapeMetadata().withErrorCode("LimitExceededException").withModeledClass(
com.amazonaws.services.glacier.model.LimitExceededException.class))
.addErrorMetadata(
new JsonErrorShapeMetadata().withErrorCode("PolicyEnforcedException").withModeledClass(
com.amazonaws.services.glacier.model.PolicyEnforcedException.class))
.withBaseServiceExceptionClass(com.amazonaws.services.glacier.model.AmazonGlacierException.class));
/**
* Constructs a new client to invoke service methods on Amazon Glacier. A credentials provider chain will be used
* that searches for credentials in this order:
*
* - Environment Variables - AWS_ACCESS_KEY_ID and AWS_SECRET_KEY
* - Java System Properties - aws.accessKeyId and aws.secretKey
* - Instance profile credentials delivered through the Amazon EC2 metadata service
*
*
*
* All service calls made using this new client object are blocking, and will not return until the service call
* completes.
*
* @see DefaultAWSCredentialsProviderChain
*/
public AmazonGlacierClient() {
this(DefaultAWSCredentialsProviderChain.getInstance(), configFactory.getConfig());
}
/**
* Constructs a new client to invoke service methods on Amazon Glacier. A credentials provider chain will be used
* that searches for credentials in this order:
*
* - Environment Variables - AWS_ACCESS_KEY_ID and AWS_SECRET_KEY
* - Java System Properties - aws.accessKeyId and aws.secretKey
* - Instance profile credentials delivered through the Amazon EC2 metadata service
*
*
*
* All service calls made using this new client object are blocking, and will not return until the service call
* completes.
*
* @param clientConfiguration
* The client configuration options controlling how this client connects to Amazon Glacier (ex: proxy
* settings, retry counts, etc.).
*
* @see DefaultAWSCredentialsProviderChain
*/
public AmazonGlacierClient(ClientConfiguration clientConfiguration) {
this(DefaultAWSCredentialsProviderChain.getInstance(), clientConfiguration);
}
/**
* Constructs a new client to invoke service methods on Amazon Glacier using the specified AWS account credentials.
*
*
* All service calls made using this new client object are blocking, and will not return until the service call
* completes.
*
* @param awsCredentials
* The AWS credentials (access key ID and secret key) to use when authenticating with AWS services.
*/
public AmazonGlacierClient(AWSCredentials awsCredentials) {
this(awsCredentials, configFactory.getConfig());
}
/**
* Constructs a new client to invoke service methods on Amazon Glacier using the specified AWS account credentials
* and client configuration options.
*
*
* All service calls made using this new client object are blocking, and will not return until the service call
* completes.
*
* @param awsCredentials
* The AWS credentials (access key ID and secret key) to use when authenticating with AWS services.
* @param clientConfiguration
* The client configuration options controlling how this client connects to Amazon Glacier (ex: proxy
* settings, retry counts, etc.).
*/
public AmazonGlacierClient(AWSCredentials awsCredentials, ClientConfiguration clientConfiguration) {
super(clientConfiguration);
this.awsCredentialsProvider = new StaticCredentialsProvider(awsCredentials);
init();
}
/**
* Constructs a new client to invoke service methods on Amazon Glacier using the specified AWS account credentials
* provider.
*
*
* All service calls made using this new client object are blocking, and will not return until the service call
* completes.
*
* @param awsCredentialsProvider
* The AWS credentials provider which will provide credentials to authenticate requests with AWS services.
*/
public AmazonGlacierClient(AWSCredentialsProvider awsCredentialsProvider) {
this(awsCredentialsProvider, configFactory.getConfig());
}
/**
* Constructs a new client to invoke service methods on Amazon Glacier using the specified AWS account credentials
* provider and client configuration options.
*
*
* All service calls made using this new client object are blocking, and will not return until the service call
* completes.
*
* @param awsCredentialsProvider
* The AWS credentials provider which will provide credentials to authenticate requests with AWS services.
* @param clientConfiguration
* The client configuration options controlling how this client connects to Amazon Glacier (ex: proxy
* settings, retry counts, etc.).
*/
public AmazonGlacierClient(AWSCredentialsProvider awsCredentialsProvider, ClientConfiguration clientConfiguration) {
this(awsCredentialsProvider, clientConfiguration, null);
}
/**
* Constructs a new client to invoke service methods on Amazon Glacier using the specified AWS account credentials
* provider, client configuration options, and request metric collector.
*
*
* All service calls made using this new client object are blocking, and will not return until the service call
* completes.
*
* @param awsCredentialsProvider
* The AWS credentials provider which will provide credentials to authenticate requests with AWS services.
* @param clientConfiguration
* The client configuration options controlling how this client connects to Amazon Glacier (ex: proxy
* settings, retry counts, etc.).
* @param requestMetricCollector
* optional request metric collector
*/
public AmazonGlacierClient(AWSCredentialsProvider awsCredentialsProvider, ClientConfiguration clientConfiguration,
RequestMetricCollector requestMetricCollector) {
super(clientConfiguration, requestMetricCollector);
this.awsCredentialsProvider = awsCredentialsProvider;
init();
}
/**
* Constructs a new client to invoke service methods on Amazon Glacier using the specified parameters.
*
*
* All service calls made using this new client object are blocking, and will not return until the service call
* completes.
*
* @param clientParams
* Object providing client parameters.
*/
AmazonGlacierClient(AwsSyncClientParams clientParams) {
super(clientParams);
this.awsCredentialsProvider = clientParams.getCredentialsProvider();
init();
}
private void init() {
setServiceNameIntern(DEFAULT_SIGNING_NAME);
setEndpointPrefix(ENDPOINT_PREFIX);
// calling this.setEndPoint(...) will also modify the signer accordingly
setEndpoint("https://glacier.us-east-1.amazonaws.com");
HandlerChainFactory chainFactory = new HandlerChainFactory();
requestHandler2s.addAll(chainFactory.newRequestHandlerChain("/com/amazonaws/services/glacier/request.handlers"));
requestHandler2s.addAll(chainFactory.newRequestHandler2Chain("/com/amazonaws/services/glacier/request.handler2s"));
requestHandler2s.addAll(chainFactory.getGlobalHandlers());
}
/**
*
* This operation aborts a multipart upload identified by the upload ID.
*
*
* After the Abort Multipart Upload request succeeds, you cannot upload any more parts to the multipart upload or
* complete the multipart upload. Aborting a completed upload fails. However, aborting an already-aborted upload
* will succeed, for a short time. For more information about uploading a part and completing a multipart upload,
* see UploadMultipartPart and CompleteMultipartUpload.
*
*
* This operation is idempotent.
*
*
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see Access Control
* Using AWS Identity and Access Management (IAM).
*
*
* For conceptual information and underlying REST API, go to Working with Archives in
* Amazon Glacier and Abort Multipart
* Upload in the Amazon Glacier Developer Guide.
*
*
* @param abortMultipartUploadRequest
* Provides options to abort a multipart upload identified by the upload ID.
*
* For information about the underlying REST API, go to Abort Multipart
* Upload. For conceptual information, go to Working with
* Archives in Amazon Glacier.
* @return Result of the AbortMultipartUpload operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.AbortMultipartUpload
*/
@Override
public AbortMultipartUploadResult abortMultipartUpload(AbortMultipartUploadRequest abortMultipartUploadRequest) {
ExecutionContext executionContext = createExecutionContext(abortMultipartUploadRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new AbortMultipartUploadRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(abortMultipartUploadRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false), new AbortMultipartUploadResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation aborts the vault locking process if the vault lock is not in the Locked state. If the
* vault lock is in the Locked state when this operation is requested, the operation returns an
* AccessDeniedException error. Aborting the vault locking process removes the vault lock policy from
* the specified vault.
*
*
* A vault lock is put into the InProgress state by calling InitiateVaultLock. A vault lock is
* put into the Locked state by calling CompleteVaultLock. You can get the state of a vault lock
* by calling GetVaultLock. For more information about the vault locking process, see Amazon Glacier Vault Lock. For
* more information about vault lock policies, see Amazon Glacier Access Control
* with Vault Lock Policies.
*
*
* This operation is idempotent. You can successfully invoke this operation multiple times, if the vault lock is in
* the InProgress state or if there is no policy associated with the vault.
*
*
* @param abortVaultLockRequest
* The input values for AbortVaultLock.
* @return Result of the AbortVaultLock operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.AbortVaultLock
*/
@Override
public AbortVaultLockResult abortVaultLock(AbortVaultLockRequest abortVaultLockRequest) {
ExecutionContext executionContext = createExecutionContext(abortVaultLockRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new AbortVaultLockRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(abortVaultLockRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false), new AbortVaultLockResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation adds the specified tags to a vault. Each tag is composed of a key and a value. Each vault can have
* up to 10 tags. If your request would cause the tag limit for the vault to be exceeded, the operation throws the
* LimitExceededException error. If a tag already exists on the vault under a specified key, the
* existing key value will be overwritten. For more information about tags, see Tagging Amazon Glacier Resources.
*
*
* @param addTagsToVaultRequest
* The input values for AddTagsToVault.
* @return Result of the AddTagsToVault operation returned by the service.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws LimitExceededException
* Returned if the request results in a vault or account limit being exceeded.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.AddTagsToVault
*/
@Override
public AddTagsToVaultResult addTagsToVault(AddTagsToVaultRequest addTagsToVaultRequest) {
ExecutionContext executionContext = createExecutionContext(addTagsToVaultRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new AddTagsToVaultRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(addTagsToVaultRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false), new AddTagsToVaultResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* You call this operation to inform Amazon Glacier that all the archive parts have been uploaded and that Amazon
* Glacier can now assemble the archive from the uploaded parts. After assembling and saving the archive to the
* vault, Amazon Glacier returns the URI path of the newly created archive resource. Using the URI path, you can
* then access the archive. After you upload an archive, you should save the archive ID returned to retrieve the
* archive at a later point. You can also get the vault inventory to obtain a list of archive IDs in a vault. For
* more information, see InitiateJob.
*
*
* In the request, you must include the computed SHA256 tree hash of the entire archive you have uploaded. For
* information about computing a SHA256 tree hash, see Computing Checksums. On
* the server side, Amazon Glacier also constructs the SHA256 tree hash of the assembled archive. If the values
* match, Amazon Glacier saves the archive to the vault; otherwise, it returns an error, and the operation fails.
* The ListParts operation returns a list of parts uploaded for a specific multipart upload. It includes
* checksum information for each uploaded part that can be used to debug a bad checksum issue.
*
*
* Additionally, Amazon Glacier also checks for any missing content ranges when assembling the archive, if missing
* content ranges are found, Amazon Glacier returns an error and the operation fails.
*
*
* Complete Multipart Upload is an idempotent operation. After your first successful complete multipart upload, if
* you call the operation again within a short period, the operation will succeed and return the same archive ID.
* This is useful in the event you experience a network issue that causes an aborted connection or receive a 500
* server error, in which case you can repeat your Complete Multipart Upload request and get the same archive ID
* without creating duplicate archives. Note, however, that after the multipart upload completes, you cannot call
* the List Parts operation and the multipart upload will not appear in List Multipart Uploads response, even if
* idempotent complete is possible.
*
*
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see Access Control
* Using AWS Identity and Access Management (IAM).
*
*
* For conceptual information and underlying REST API, go to Uploading Large Archives in
* Parts (Multipart Upload) and Complete Multipart
* Upload in the Amazon Glacier Developer Guide.
*
*
* @param completeMultipartUploadRequest
* Provides options to complete a multipart upload operation. This informs Amazon Glacier that all the
* archive parts have been uploaded and Amazon Glacier can now assemble the archive from the uploaded parts.
* After assembling and saving the archive to the vault, Amazon Glacier returns the URI path of the newly
* created archive resource.
* @return Result of the CompleteMultipartUpload operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.CompleteMultipartUpload
*/
@Override
public CompleteMultipartUploadResult completeMultipartUpload(CompleteMultipartUploadRequest completeMultipartUploadRequest) {
ExecutionContext executionContext = createExecutionContext(completeMultipartUploadRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new CompleteMultipartUploadRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(completeMultipartUploadRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false),
new CompleteMultipartUploadResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation completes the vault locking process by transitioning the vault lock from the
* InProgress state to the Locked state, which causes the vault lock policy to become
* unchangeable. A vault lock is put into the InProgress state by calling InitiateVaultLock. You
* can obtain the state of the vault lock by calling GetVaultLock. For more information about the vault
* locking process, Amazon Glacier
* Vault Lock.
*
*
* This operation is idempotent. This request is always successful if the vault lock is in the Locked
* state and the provided lock ID matches the lock ID originally used to lock the vault.
*
*
* If an invalid lock ID is passed in the request when the vault lock is in the Locked state, the
* operation returns an AccessDeniedException error. If an invalid lock ID is passed in the request
* when the vault lock is in the InProgress state, the operation throws an
* InvalidParameter error.
*
*
* @param completeVaultLockRequest
* The input values for CompleteVaultLock.
* @return Result of the CompleteVaultLock operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.CompleteVaultLock
*/
@Override
public CompleteVaultLockResult completeVaultLock(CompleteVaultLockRequest completeVaultLockRequest) {
ExecutionContext executionContext = createExecutionContext(completeVaultLockRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new CompleteVaultLockRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(completeVaultLockRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false), new CompleteVaultLockResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation creates a new vault with the specified name. The name of the vault must be unique within a region
* for an AWS account. You can create up to 1,000 vaults per account. If you need to create more vaults, contact
* Amazon Glacier.
*
*
* You must use the following guidelines when naming a vault.
*
*
*
* -
*
* Names can be between 1 and 255 characters long.
*
*
* -
*
* Allowed characters are a-z, A-Z, 0-9, '_' (underscore), '-' (hyphen), and '.' (period).
*
*
*
*
*
* This operation is idempotent.
*
*
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see Access Control
* Using AWS Identity and Access Management (IAM).
*
*
* For conceptual information and underlying REST API, go to Creating a Vault in Amazon
* Glacier and Create Vault
* in the Amazon Glacier Developer Guide.
*
*
* @param createVaultRequest
* Provides options to create a vault.
* @return Result of the CreateVault operation returned by the service.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @throws LimitExceededException
* Returned if the request results in a vault or account limit being exceeded.
* @sample AmazonGlacier.CreateVault
*/
@Override
public CreateVaultResult createVault(CreateVaultRequest createVaultRequest) {
ExecutionContext executionContext = createExecutionContext(createVaultRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new CreateVaultRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(createVaultRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false), new CreateVaultResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation deletes an archive from a vault. Subsequent requests to initiate a retrieval of this archive will
* fail. Archive retrievals that are in progress for this archive ID may or may not succeed according to the
* following scenarios:
*
*
* - If the archive retrieval job is actively preparing the data for download when Amazon Glacier receives the
* delete archive request, the archival retrieval operation might fail.
* - If the archive retrieval job has successfully prepared the archive for download when Amazon Glacier receives
* the delete archive request, you will be able to download the output.
*
*
* This operation is idempotent. Attempting to delete an already-deleted archive does not result in an error.
*
*
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see Access Control
* Using AWS Identity and Access Management (IAM).
*
*
* For conceptual information and underlying REST API, go to Deleting an Archive in Amazon
* Glacier and Delete
* Archive in the Amazon Glacier Developer Guide.
*
*
* @param deleteArchiveRequest
* Provides options for deleting an archive from an Amazon Glacier vault.
* @return Result of the DeleteArchive operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.DeleteArchive
*/
@Override
public DeleteArchiveResult deleteArchive(DeleteArchiveRequest deleteArchiveRequest) {
ExecutionContext executionContext = createExecutionContext(deleteArchiveRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new DeleteArchiveRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(deleteArchiveRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false), new DeleteArchiveResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation deletes a vault. Amazon Glacier will delete a vault only if there are no archives in the vault as
* of the last inventory and there have been no writes to the vault since the last inventory. If either of these
* conditions is not satisfied, the vault deletion fails (that is, the vault is not removed) and Amazon Glacier
* returns an error. You can use DescribeVault to return the number of archives in a vault, and you can use
* Initiate a Job (POST
* jobs) to initiate a new inventory retrieval for a vault. The inventory contains the archive IDs you use to
* delete archives using Delete Archive (DELETE
* archive).
*
*
* This operation is idempotent.
*
*
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see Access Control
* Using AWS Identity and Access Management (IAM).
*
*
* For conceptual information and underlying REST API, go to Deleting a Vault in Amazon
* Glacier and Delete Vault
* in the Amazon Glacier Developer Guide.
*
*
* @param deleteVaultRequest
* Provides options for deleting a vault from Amazon Glacier.
* @return Result of the DeleteVault operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.DeleteVault
*/
@Override
public DeleteVaultResult deleteVault(DeleteVaultRequest deleteVaultRequest) {
ExecutionContext executionContext = createExecutionContext(deleteVaultRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new DeleteVaultRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(deleteVaultRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false), new DeleteVaultResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation deletes the access policy associated with the specified vault. The operation is eventually
* consistent; that is, it might take some time for Amazon Glacier to completely remove the access policy, and you
* might still see the effect of the policy for a short time after you send the delete request.
*
*
* This operation is idempotent. You can invoke delete multiple times, even if there is no policy associated with
* the vault. For more information about vault access policies, see Amazon Glacier Access Control
* with Vault Access Policies.
*
*
* @param deleteVaultAccessPolicyRequest
* DeleteVaultAccessPolicy input.
* @return Result of the DeleteVaultAccessPolicy operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.DeleteVaultAccessPolicy
*/
@Override
public DeleteVaultAccessPolicyResult deleteVaultAccessPolicy(DeleteVaultAccessPolicyRequest deleteVaultAccessPolicyRequest) {
ExecutionContext executionContext = createExecutionContext(deleteVaultAccessPolicyRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new DeleteVaultAccessPolicyRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(deleteVaultAccessPolicyRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false),
new DeleteVaultAccessPolicyResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation deletes the notification configuration set for a vault. The operation is eventually consistent;
* that is, it might take some time for Amazon Glacier to completely disable the notifications and you might still
* receive some notifications for a short time after you send the delete request.
*
*
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see Access Control Using AWS Identity
* and Access Management (IAM).
*
*
* For conceptual information and underlying REST API, go to Configuring Vault
* Notifications in Amazon Glacier and Delete Vault
* Notification Configuration in the Amazon Glacier Developer Guide.
*
*
* @param deleteVaultNotificationsRequest
* Provides options for deleting a vault notification configuration from an Amazon Glacier vault.
* @return Result of the DeleteVaultNotifications operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.DeleteVaultNotifications
*/
@Override
public DeleteVaultNotificationsResult deleteVaultNotifications(DeleteVaultNotificationsRequest deleteVaultNotificationsRequest) {
ExecutionContext executionContext = createExecutionContext(deleteVaultNotificationsRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new DeleteVaultNotificationsRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(deleteVaultNotificationsRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false),
new DeleteVaultNotificationsResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation returns information about a job you previously initiated, including the job initiation date, the
* user who initiated the job, the job status code/message and the Amazon SNS topic to notify after Amazon Glacier
* completes the job. For more information about initiating a job, see InitiateJob.
*
*
*
* This operation enables you to check the status of your job. However, it is strongly recommended that you set up
* an Amazon SNS topic and specify it in your initiate job request so that Amazon Glacier can notify the topic after
* it completes the job.
*
*
*
* A job ID will not expire for at least 24 hours after Amazon Glacier completes the job.
*
*
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see Access Control
* Using AWS Identity and Access Management (IAM).
*
*
* For information about the underlying REST API, go to Working with Archives in
* Amazon Glacier in the Amazon Glacier Developer Guide.
*
*
* @param describeJobRequest
* Provides options for retrieving a job description.
* @return Result of the DescribeJob operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.DescribeJob
*/
@Override
public DescribeJobResult describeJob(DescribeJobRequest describeJobRequest) {
ExecutionContext executionContext = createExecutionContext(describeJobRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new DescribeJobRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(describeJobRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false), new DescribeJobResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation returns information about a vault, including the vault's Amazon Resource Name (ARN), the date the
* vault was created, the number of archives it contains, and the total size of all the archives in the vault. The
* number of archives and their total size are as of the last inventory generation. This means that if you add or
* remove an archive from a vault, and then immediately use Describe Vault, the change in contents will not be
* immediately reflected. If you want to retrieve the latest inventory of the vault, use InitiateJob. Amazon
* Glacier generates vault inventories approximately daily. For more information, see Downloading a Vault Inventory in
* Amazon Glacier.
*
*
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see Access Control
* Using AWS Identity and Access Management (IAM).
*
*
* For conceptual information and underlying REST API, go to Retrieving Vault Metadata
* in Amazon Glacier and Describe Vault in the
* Amazon Glacier Developer Guide.
*
*
* @param describeVaultRequest
* Provides options for retrieving metadata for a specific vault in Amazon Glacier.
* @return Result of the DescribeVault operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.DescribeVault
*/
@Override
public DescribeVaultResult describeVault(DescribeVaultRequest describeVaultRequest) {
ExecutionContext executionContext = createExecutionContext(describeVaultRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new DescribeVaultRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(describeVaultRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false), new DescribeVaultResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation returns the current data retrieval policy for the account and region specified in the GET request.
* For more information about data retrieval policies, see Amazon Glacier Data
* Retrieval Policies.
*
*
* @param getDataRetrievalPolicyRequest
* Input for GetDataRetrievalPolicy.
* @return Result of the GetDataRetrievalPolicy operation returned by the service.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.GetDataRetrievalPolicy
*/
@Override
public GetDataRetrievalPolicyResult getDataRetrievalPolicy(GetDataRetrievalPolicyRequest getDataRetrievalPolicyRequest) {
ExecutionContext executionContext = createExecutionContext(getDataRetrievalPolicyRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new GetDataRetrievalPolicyRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(getDataRetrievalPolicyRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false),
new GetDataRetrievalPolicyResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation downloads the output of the job you initiated using InitiateJob. Depending on the job type
* you specified when you initiated the job, the output will be either the content of an archive or a vault
* inventory.
*
*
* A job ID will not expire for at least 24 hours after Amazon Glacier completes the job. That is, you can download
* the job output within the 24 hours period after Amazon Glacier completes the job.
*
*
* If the job output is large, then you can use the Range request header to retrieve a portion of the
* output. This allows you to download the entire output in smaller chunks of bytes. For example, suppose you have 1
* GB of job output you want to download and you decide to download 128 MB chunks of data at a time, which is a
* total of eight Get Job Output requests. You use the following process to download the job output:
*
*
* -
*
* Download a 128 MB chunk of output by specifying the appropriate byte range using the Range header.
*
*
* -
*
* Along with the data, the response includes a SHA256 tree hash of the payload. You compute the checksum of the
* payload on the client and compare it with the checksum you received in the response to ensure you received all
* the expected data.
*
*
* -
*
* Repeat steps 1 and 2 for all the eight 128 MB chunks of output data, each time specifying the appropriate byte
* range.
*
*
* -
*
* After downloading all the parts of the job output, you have a list of eight checksum values. Compute the tree
* hash of these values to find the checksum of the entire output. Using the DescribeJob API, obtain job
* information of the job that provided you the output. The response includes the checksum of the entire archive
* stored in Amazon Glacier. You compare this value with the checksum you computed to ensure you have downloaded the
* entire archive content with no errors.
*
*
*
*
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see Access Control
* Using AWS Identity and Access Management (IAM).
*
*
* For conceptual information and the underlying REST API, go to Downloading a Vault
* Inventory, Downloading an
* Archive, and Get Job
* Output
*
*
* @param getJobOutputRequest
* Provides options for downloading output of an Amazon Glacier job.
* @return Result of the GetJobOutput operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.GetJobOutput
*/
@Override
public GetJobOutputResult getJobOutput(GetJobOutputRequest getJobOutputRequest) {
ExecutionContext executionContext = createExecutionContext(getJobOutputRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new GetJobOutputRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(getJobOutputRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(false).withHasStreamingSuccessResponse(true), new GetJobOutputResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
GetJobOutputResult result = response.getAwsResponse();
// wrapping the response with the LengthCheckInputStream.
result.setBody(new LengthCheckInputStream(result.getBody(), Long.parseLong(response.getHttpResponse().getHeaders().get("Content-Length")),
com.amazonaws.util.LengthCheckInputStream.INCLUDE_SKIPPED_BYTES));
// wrapping the response with the service client holder input stream to avoid client being GC'ed.
result.setBody(new ServiceClientHolderInputStream(result.getBody(), this));
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation retrieves the access-policy subresource set on the vault; for more information on
* setting this subresource, see Set Vault Access Policy
* (PUT access-policy). If there is no access policy set on the vault, the operation returns a
* 404 Not found error. For more information about vault access policies, see Amazon Glacier Access Control
* with Vault Access Policies.
*
*
* @param getVaultAccessPolicyRequest
* Input for GetVaultAccessPolicy.
* @return Result of the GetVaultAccessPolicy operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.GetVaultAccessPolicy
*/
@Override
public GetVaultAccessPolicyResult getVaultAccessPolicy(GetVaultAccessPolicyRequest getVaultAccessPolicyRequest) {
ExecutionContext executionContext = createExecutionContext(getVaultAccessPolicyRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new GetVaultAccessPolicyRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(getVaultAccessPolicyRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false), new GetVaultAccessPolicyResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation retrieves the following attributes from the lock-policy subresource set on the
* specified vault:
*
* -
*
* The vault lock policy set on the vault.
*
*
* -
*
* The state of the vault lock, which is either InProgess or Locked.
*
*
* -
*
* When the lock ID expires. The lock ID is used to complete the vault locking process.
*
*
* -
*
* When the vault lock was initiated and put into the InProgress state.
*
*
*
*
*
* A vault lock is put into the InProgress state by calling InitiateVaultLock. A vault lock is
* put into the Locked state by calling CompleteVaultLock. You can abort the vault locking
* process by calling AbortVaultLock. For more information about the vault locking process, Amazon Glacier Vault Lock.
*
*
* If there is no vault lock policy set on the vault, the operation returns a 404 Not found error. For
* more information about vault lock policies, Amazon Glacier Access Control
* with Vault Lock Policies.
*
*
* @param getVaultLockRequest
* The input values for GetVaultLock.
* @return Result of the GetVaultLock operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.GetVaultLock
*/
@Override
public GetVaultLockResult getVaultLock(GetVaultLockRequest getVaultLockRequest) {
ExecutionContext executionContext = createExecutionContext(getVaultLockRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new GetVaultLockRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(getVaultLockRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false), new GetVaultLockResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation retrieves the notification-configuration subresource of the specified
* vault.
*
*
* For information about setting a notification configuration on a vault, see SetVaultNotifications. If a
* notification configuration for a vault is not set, the operation returns a
* 404 Not Found error. For more information about vault notifications, see Configuring Vault
* Notifications in Amazon Glacier.
*
*
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see Access Control
* Using AWS Identity and Access Management (IAM).
*
*
* For conceptual information and underlying REST API, go to Configuring Vault
* Notifications in Amazon Glacier and Get Vault
* Notification Configuration in the Amazon Glacier Developer Guide.
*
*
* @param getVaultNotificationsRequest
* Provides options for retrieving the notification configuration set on an Amazon Glacier vault.
* @return Result of the GetVaultNotifications operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.GetVaultNotifications
*/
@Override
public GetVaultNotificationsResult getVaultNotifications(GetVaultNotificationsRequest getVaultNotificationsRequest) {
ExecutionContext executionContext = createExecutionContext(getVaultNotificationsRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new GetVaultNotificationsRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(getVaultNotificationsRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory
.createResponseHandler(new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false),
new GetVaultNotificationsResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation initiates a job of the specified type. In this release, you can initiate a job to retrieve either
* an archive or a vault inventory (a list of archives in a vault).
*
*
* Retrieving data from Amazon Glacier is a two-step process:
*
*
* -
*
* Initiate a retrieval job.
*
*
*
* A data retrieval policy can cause your initiate retrieval job request to fail with a PolicyEnforcedException
* exception. For more information about data retrieval policies, see Amazon Glacier Data
* Retrieval Policies. For more information about the PolicyEnforcedException exception, see Error Responses.
*
*
* -
*
* After the job completes, download the bytes.
*
*
*
*
* The retrieval request is executed asynchronously. When you initiate a retrieval job, Amazon Glacier creates a job
* and returns a job ID in the response. When Amazon Glacier completes the job, you can get the job output (archive
* or inventory data). For information about getting job output, see GetJobOutput operation.
*
*
* The job must complete before you can get its output. To determine when a job is complete, you have the following
* options:
*
*
* -
*
* Use Amazon SNS Notification You can specify an Amazon Simple Notification Service (Amazon SNS) topic to
* which Amazon Glacier can post a notification after the job is completed. You can specify an SNS topic per job
* request. The notification is sent only after Amazon Glacier completes the job. In addition to specifying an SNS
* topic per job request, you can configure vault notifications for a vault so that job notifications are always
* sent. For more information, see SetVaultNotifications.
*
*
* -
*
* Get job details You can make a DescribeJob request to obtain job status information while a job is
* in progress. However, it is more efficient to use an Amazon SNS notification to determine when a job is complete.
*
*
*
*
*
* The information you get via notification is same that you get by calling DescribeJob.
*
*
*
* If for a specific event, you add both the notification configuration on the vault and also specify an SNS topic
* in your initiate job request, Amazon Glacier sends both notifications. For more information, see
* SetVaultNotifications.
*
*
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see Access Control
* Using AWS Identity and Access Management (IAM).
*
*
* About the Vault Inventory
*
*
* Amazon Glacier prepares an inventory for each vault periodically, every 24 hours. When you initiate a job for a
* vault inventory, Amazon Glacier returns the last inventory for the vault. The inventory data you get might be up
* to a day or two days old. Also, the initiate inventory job might take some time to complete before you can
* download the vault inventory. So you do not want to retrieve a vault inventory for each vault operation. However,
* in some scenarios, you might find the vault inventory useful. For example, when you upload an archive, you can
* provide an archive description but not an archive name. Amazon Glacier provides you a unique archive ID, an
* opaque string of characters. So, you might maintain your own database that maps archive names to their
* corresponding Amazon Glacier assigned archive IDs. You might find the vault inventory useful in the event you
* need to reconcile information in your database with the actual vault inventory.
*
*
* Range Inventory Retrieval
*
*
* You can limit the number of inventory items retrieved by filtering on the archive creation date or by setting a
* limit.
*
*
* Filtering by Archive Creation Date
*
*
* You can retrieve inventory items for archives created between StartDate and EndDate by
* specifying values for these parameters in the InitiateJob request. Archives created on or after the
* StartDate and before the EndDate will be returned. If you only provide the
* StartDate without the EndDate, you will retrieve the inventory for all archives created
* on or after the StartDate. If you only provide the EndDate without the
* StartDate, you will get back the inventory for all archives created before the EndDate.
*
*
* Limiting Inventory Items per Retrieval
*
*
* You can limit the number of inventory items returned by setting the Limit parameter in the
* InitiateJob request. The inventory job output will contain inventory items up to the specified
* Limit. If there are more inventory items available, the result is paginated. After a job is complete
* you can use the DescribeJob operation to get a marker that you use in a subsequent InitiateJob
* request. The marker will indicate the starting point to retrieve the next set of inventory items. You can page
* through your entire inventory by repeatedly making InitiateJob requests with the marker from the previous
* DescribeJob output, until you get a marker from DescribeJob that returns null, indicating that
* there are no more inventory items available.
*
*
* You can use the Limit parameter together with the date range parameters.
*
*
* About Ranged Archive Retrieval
*
*
* You can initiate an archive retrieval for the whole archive or a range of the archive. In the case of ranged
* archive retrieval, you specify a byte range to return or the whole archive. The range specified must be megabyte
* (MB) aligned, that is the range start value must be divisible by 1 MB and range end value plus 1 must be
* divisible by 1 MB or equal the end of the archive. If the ranged archive retrieval is not megabyte aligned, this
* operation returns a 400 response. Furthermore, to ensure you get checksum values for data you download using Get
* Job Output API, the range must be tree hash aligned.
*
*
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see Access Control
* Using AWS Identity and Access Management (IAM).
*
*
* For conceptual information and the underlying REST API, go to Initiate a Job and Downloading a Vault Inventory
*
*
* @param initiateJobRequest
* Provides options for initiating an Amazon Glacier job.
* @return Result of the InitiateJob operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws PolicyEnforcedException
* Returned if a retrieval job would exceed the current data policy's retrieval rate limit. For more
* information about data retrieval policies,
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.InitiateJob
*/
@Override
public InitiateJobResult initiateJob(InitiateJobRequest initiateJobRequest) {
ExecutionContext executionContext = createExecutionContext(initiateJobRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new InitiateJobRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(initiateJobRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false), new InitiateJobResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation initiates a multipart upload. Amazon Glacier creates a multipart upload resource and returns its
* ID in the response. The multipart upload ID is used in subsequent requests to upload parts of an archive (see
* UploadMultipartPart).
*
*
* When you initiate a multipart upload, you specify the part size in number of bytes. The part size must be a
* megabyte (1024 KB) multiplied by a power of 2-for example, 1048576 (1 MB), 2097152 (2 MB), 4194304 (4 MB),
* 8388608 (8 MB), and so on. The minimum allowable part size is 1 MB, and the maximum is 4 GB.
*
*
* Every part you upload to this resource (see UploadMultipartPart), except the last one, must have the same
* size. The last one can be the same size or smaller. For example, suppose you want to upload a 16.2 MB file. If
* you initiate the multipart upload with a part size of 4 MB, you will upload four parts of 4 MB each and one part
* of 0.2 MB.
*
*
*
* You don't need to know the size of the archive when you start a multipart upload because Amazon Glacier does not
* require you to specify the overall archive size.
*
*
*
* After you complete the multipart upload, Amazon Glacier removes the multipart upload resource referenced by the
* ID. Amazon Glacier also removes the multipart upload resource if you cancel the multipart upload or it may be
* removed if there is no activity for a period of 24 hours.
*
*
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see Access Control
* Using AWS Identity and Access Management (IAM).
*
*
* For conceptual information and underlying REST API, go to Uploading Large Archives in
* Parts (Multipart Upload) and Initiate Multipart
* Upload in the Amazon Glacier Developer Guide.
*
*
* @param initiateMultipartUploadRequest
* Provides options for initiating a multipart upload to an Amazon Glacier vault.
* @return Result of the InitiateMultipartUpload operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.InitiateMultipartUpload
*/
@Override
public InitiateMultipartUploadResult initiateMultipartUpload(InitiateMultipartUploadRequest initiateMultipartUploadRequest) {
ExecutionContext executionContext = createExecutionContext(initiateMultipartUploadRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new InitiateMultipartUploadRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(initiateMultipartUploadRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false),
new InitiateMultipartUploadResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation initiates the vault locking process by doing the following:
*
* -
*
* Installing a vault lock policy on the specified vault.
*
*
* -
*
* Setting the lock state of vault lock to InProgress.
*
*
* -
*
* Returning a lock ID, which is used to complete the vault locking process.
*
*
*
*
*
* You can set one vault lock policy for each vault and this policy can be up to 20 KB in size. For more information
* about vault lock policies, see Amazon Glacier Access Control
* with Vault Lock Policies.
*
*
* You must complete the vault locking process within 24 hours after the vault lock enters the
* InProgress state. After the 24 hour window ends, the lock ID expires, the vault automatically exits
* the InProgress state, and the vault lock policy is removed from the vault. You call
* CompleteVaultLock to complete the vault locking process by setting the state of the vault lock to
* Locked.
*
*
* After a vault lock is in the Locked state, you cannot initiate a new vault lock for the vault.
*
*
* You can abort the vault locking process by calling AbortVaultLock. You can get the state of the vault lock
* by calling GetVaultLock. For more information about the vault locking process, Amazon Glacier Vault Lock.
*
*
* If this operation is called when the vault lock is in the InProgress state, the operation returns an
* AccessDeniedException error. When the vault lock is in the InProgress state you must
* call AbortVaultLock before you can initiate a new vault lock policy.
*
*
* @param initiateVaultLockRequest
* The input values for InitiateVaultLock.
* @return Result of the InitiateVaultLock operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.InitiateVaultLock
*/
@Override
public InitiateVaultLockResult initiateVaultLock(InitiateVaultLockRequest initiateVaultLockRequest) {
ExecutionContext executionContext = createExecutionContext(initiateVaultLockRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new InitiateVaultLockRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(initiateVaultLockRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false), new InitiateVaultLockResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation lists jobs for a vault, including jobs that are in-progress and jobs that have recently finished.
*
*
*
* Amazon Glacier retains recently completed jobs for a period before deleting them; however, it eventually removes
* completed jobs. The output of completed jobs can be retrieved. Retaining completed jobs for a period of time
* after they have completed enables you to get a job output in the event you miss the job completion notification
* or your first attempt to download it fails. For example, suppose you start an archive retrieval job to download
* an archive. After the job completes, you start to download the archive but encounter a network error. In this
* scenario, you can retry and download the archive while the job exists.
*
*
*
* To retrieve an archive or retrieve a vault inventory from Amazon Glacier, you first initiate a job, and after the
* job completes, you download the data. For an archive retrieval, the output is the archive data, and for an
* inventory retrieval, it is the inventory list. The List Job operation returns a list of these jobs sorted by job
* initiation time.
*
*
* This List Jobs operation supports pagination. By default, this operation returns up to 1,000 jobs in the
* response. You should always check the response for a marker at which to continue the list; if there
* are no more items the marker is null. To return a list of jobs that begins at a
* specific job, set the marker request parameter to the value you obtained from a previous List Jobs
* request. You can also limit the number of jobs returned in the response by specifying the limit
* parameter in the request.
*
*
* Additionally, you can filter the jobs list returned by specifying an optional statuscode
* (InProgress, Succeeded, or Failed) and completed (true, false) parameter. The
* statuscode allows you to specify that only jobs that match a specified status are returned. The
* completed parameter allows you to specify that only jobs in a specific completion state are
* returned.
*
*
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see Access Control
* Using AWS Identity and Access Management (IAM).
*
*
* For the underlying REST API, go to List Jobs
*
*
* @param listJobsRequest
* Provides options for retrieving a job list for an Amazon Glacier vault.
* @return Result of the ListJobs operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.ListJobs
*/
@Override
public ListJobsResult listJobs(ListJobsRequest listJobsRequest) {
ExecutionContext executionContext = createExecutionContext(listJobsRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new ListJobsRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(listJobsRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(new JsonOperationMetadata()
.withPayloadJson(true).withHasStreamingSuccessResponse(false), new ListJobsResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation lists in-progress multipart uploads for the specified vault. An in-progress multipart upload is a
* multipart upload that has been initiated by an InitiateMultipartUpload request, but has not yet been
* completed or aborted. The list returned in the List Multipart Upload response has no guaranteed order.
*
*
* The List Multipart Uploads operation supports pagination. By default, this operation returns up to 1,000
* multipart uploads in the response. You should always check the response for a marker at which to
* continue the list; if there are no more items the marker is null. To return a list of
* multipart uploads that begins at a specific upload, set the marker request parameter to the value
* you obtained from a previous List Multipart Upload request. You can also limit the number of uploads returned in
* the response by specifying the limit parameter in the request.
*
*
* Note the difference between this operation and listing parts (ListParts). The List Multipart Uploads
* operation lists all multipart uploads for a vault and does not require a multipart upload ID. The List Parts
* operation requires a multipart upload ID since parts are associated with a single upload.
*
*
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see Access Control
* Using AWS Identity and Access Management (IAM).
*
*
* For conceptual information and the underlying REST API, go to Working with Archives in
* Amazon Glacier and List Multipart Uploads
* in the Amazon Glacier Developer Guide.
*
*
* @param listMultipartUploadsRequest
* Provides options for retrieving list of in-progress multipart uploads for an Amazon Glacier vault.
* @return Result of the ListMultipartUploads operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.ListMultipartUploads
*/
@Override
public ListMultipartUploadsResult listMultipartUploads(ListMultipartUploadsRequest listMultipartUploadsRequest) {
ExecutionContext executionContext = createExecutionContext(listMultipartUploadsRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new ListMultipartUploadsRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(listMultipartUploadsRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false), new ListMultipartUploadsResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation lists the parts of an archive that have been uploaded in a specific multipart upload. You can make
* this request at any time during an in-progress multipart upload before you complete the upload (see
* CompleteMultipartUpload. List Parts returns an error for completed uploads. The list returned in the List
* Parts response is sorted by part range.
*
*
* The List Parts operation supports pagination. By default, this operation returns up to 1,000 uploaded parts in
* the response. You should always check the response for a marker at which to continue
* the list; if there are no more items the marker is null. To
* return a list of parts that begins at a specific part, set the marker request parameter to the value
* you obtained from a previous List Parts request. You can also limit the number of parts returned in the response
* by specifying the limit parameter in the request.
*
*
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see Access Control
* Using AWS Identity and Access Management (IAM).
*
*
* For conceptual information and the underlying REST API, go to Working with Archives in
* Amazon Glacier and List Parts in the
* Amazon Glacier Developer Guide.
*
*
* @param listPartsRequest
* Provides options for retrieving a list of parts of an archive that have been uploaded in a specific
* multipart upload.
* @return Result of the ListParts operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.ListParts
*/
@Override
public ListPartsResult listParts(ListPartsRequest listPartsRequest) {
ExecutionContext executionContext = createExecutionContext(listPartsRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new ListPartsRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(listPartsRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(new JsonOperationMetadata()
.withPayloadJson(true).withHasStreamingSuccessResponse(false), new ListPartsResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation lists all the tags attached to a vault. The operation returns an empty map if there are no tags.
* For more information about tags, see Tagging Amazon Glacier Resources.
*
*
* @param listTagsForVaultRequest
* The input value for ListTagsForVaultInput.
* @return Result of the ListTagsForVault operation returned by the service.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.ListTagsForVault
*/
@Override
public ListTagsForVaultResult listTagsForVault(ListTagsForVaultRequest listTagsForVaultRequest) {
ExecutionContext executionContext = createExecutionContext(listTagsForVaultRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new ListTagsForVaultRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(listTagsForVaultRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false), new ListTagsForVaultResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation lists all vaults owned by the calling user's account. The list returned in the response is
* ASCII-sorted by vault name.
*
*
* By default, this operation returns up to 1,000 items. If there are more vaults to list, the response
* marker field contains the vault Amazon Resource Name (ARN) at which to continue the
* list with a new List Vaults request; otherwise, the marker field is
* null. To return a list of vaults that begins at a specific vault, set the
* marker request parameter to the vault ARN you obtained from a previous List Vaults
* request. You can also limit the number of vaults returned in the response by specifying the
* limit parameter in the request.
*
*
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see Access Control
* Using AWS Identity and Access Management (IAM).
*
*
* For conceptual information and underlying REST API, go to Retrieving Vault Metadata
* in Amazon Glacier and List
* Vaults in the Amazon Glacier Developer Guide.
*
*
* @param listVaultsRequest
* Provides options to retrieve the vault list owned by the calling user's account. The list provides
* metadata information for each vault.
* @return Result of the ListVaults operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.ListVaults
*/
@Override
public ListVaultsResult listVaults(ListVaultsRequest listVaultsRequest) {
ExecutionContext executionContext = createExecutionContext(listVaultsRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new ListVaultsRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(listVaultsRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(new JsonOperationMetadata()
.withPayloadJson(true).withHasStreamingSuccessResponse(false), new ListVaultsResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation removes one or more tags from the set of tags attached to a vault. For more information about
* tags, see Tagging Amazon Glacier
* Resources. This operation is idempotent. The operation will be successful, even if there are no tags attached
* to the vault.
*
*
* @param removeTagsFromVaultRequest
* The input value for RemoveTagsFromVaultInput.
* @return Result of the RemoveTagsFromVault operation returned by the service.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.RemoveTagsFromVault
*/
@Override
public RemoveTagsFromVaultResult removeTagsFromVault(RemoveTagsFromVaultRequest removeTagsFromVaultRequest) {
ExecutionContext executionContext = createExecutionContext(removeTagsFromVaultRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new RemoveTagsFromVaultRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(removeTagsFromVaultRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false), new RemoveTagsFromVaultResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation sets and then enacts a data retrieval policy in the region specified in the PUT request. You can
* set one policy per region for an AWS account. The policy is enacted within a few minutes of a successful PUT
* operation.
*
*
* The set policy operation does not affect retrieval jobs that were in progress before the policy was enacted. For
* more information about data retrieval policies, see Amazon Glacier Data
* Retrieval Policies.
*
*
* @param setDataRetrievalPolicyRequest
* SetDataRetrievalPolicy input.
* @return Result of the SetDataRetrievalPolicy operation returned by the service.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.SetDataRetrievalPolicy
*/
@Override
public SetDataRetrievalPolicyResult setDataRetrievalPolicy(SetDataRetrievalPolicyRequest setDataRetrievalPolicyRequest) {
ExecutionContext executionContext = createExecutionContext(setDataRetrievalPolicyRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new SetDataRetrievalPolicyRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(setDataRetrievalPolicyRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false),
new SetDataRetrievalPolicyResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation configures an access policy for a vault and will overwrite an existing policy. To configure a
* vault access policy, send a PUT request to the access-policy subresource of the vault. An access
* policy is specific to a vault and is also called a vault subresource. You can set one access policy per vault and
* the policy can be up to 20 KB in size. For more information about vault access policies, see Amazon Glacier Access Control
* with Vault Access Policies.
*
*
* @param setVaultAccessPolicyRequest
* SetVaultAccessPolicy input.
* @return Result of the SetVaultAccessPolicy operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.SetVaultAccessPolicy
*/
@Override
public SetVaultAccessPolicyResult setVaultAccessPolicy(SetVaultAccessPolicyRequest setVaultAccessPolicyRequest) {
ExecutionContext executionContext = createExecutionContext(setVaultAccessPolicyRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new SetVaultAccessPolicyRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(setVaultAccessPolicyRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false), new SetVaultAccessPolicyResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation configures notifications that will be sent when specific events happen to a vault. By default, you
* don't get any notifications.
*
*
* To configure vault notifications, send a PUT request to the notification-configuration
* subresource of the vault. The request should include a JSON document that provides an Amazon SNS topic and
* specific events for which you want Amazon Glacier to send notifications to the topic.
*
*
* Amazon SNS topics must grant permission to the vault to be allowed to publish notifications to the topic. You can
* configure a vault to publish a notification for the following vault events:
*
*
* - ArchiveRetrievalCompleted This event occurs when a job that was initiated for an archive retrieval is
* completed (InitiateJob). The status of the completed job can be "Succeeded" or "Failed". The notification
* sent to the SNS topic is the same output as returned from DescribeJob.
* - InventoryRetrievalCompleted This event occurs when a job that was initiated for an inventory retrieval
* is completed (InitiateJob). The status of the completed job can be "Succeeded" or "Failed". The
* notification sent to the SNS topic is the same output as returned from DescribeJob.
*
*
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see Access Control
* Using AWS Identity and Access Management (IAM).
*
*
* For conceptual information and underlying REST API, go to Configuring Vault
* Notifications in Amazon Glacier and Set Vault
* Notification Configuration in the Amazon Glacier Developer Guide.
*
*
* @param setVaultNotificationsRequest
* Provides options to configure notifications that will be sent when specific events happen to a vault.
* @return Result of the SetVaultNotifications operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.SetVaultNotifications
*/
@Override
public SetVaultNotificationsResult setVaultNotifications(SetVaultNotificationsRequest setVaultNotificationsRequest) {
ExecutionContext executionContext = createExecutionContext(setVaultNotificationsRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new SetVaultNotificationsRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(setVaultNotificationsRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory
.createResponseHandler(new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false),
new SetVaultNotificationsResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation adds an archive to a vault. This is a synchronous operation, and for a successful upload, your
* data is durably persisted. Amazon Glacier returns the archive ID in the
* x-amz-archive-id header of the response.
*
*
* You must use the archive ID to access your data in Amazon Glacier. After you upload an archive, you should save
* the archive ID returned so that you can retrieve or delete the archive later. Besides saving the archive ID, you
* can also index it and give it a friendly name to allow for better searching. You can also use the optional
* archive description field to specify how the archive is referred to in an external index of archives, such as you
* might create in Amazon DynamoDB. You can also get the vault inventory to obtain a list of archive IDs in a vault.
* For more information, see InitiateJob.
*
*
* You must provide a SHA256 tree hash of the data you are uploading. For information about computing a SHA256 tree
* hash, see Computing
* Checksums.
*
*
* You can optionally specify an archive description of up to 1,024 printable ASCII characters. You can get the
* archive description when you either retrieve the archive or get the vault inventory. For more information, see
* InitiateJob. Amazon Glacier does not interpret the description in any way. An archive description does not
* need to be unique. You cannot use the description to retrieve or sort the archive list.
*
*
* Archives are immutable. After you upload an archive, you cannot edit the archive or its description.
*
*
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see Access Control
* Using AWS Identity and Access Management (IAM).
*
*
* For conceptual information and underlying REST API, go to Uploading an Archive in
* Amazon Glacier and Upload
* Archive in the Amazon Glacier Developer Guide.
*
*
* @param uploadArchiveRequest
* Provides options to add an archive to a vault.
* @return Result of the UploadArchive operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws RequestTimeoutException
* Returned if, when uploading an archive, Amazon Glacier times out while receiving the upload.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.UploadArchive
*/
@Override
public UploadArchiveResult uploadArchive(UploadArchiveRequest uploadArchiveRequest) {
ExecutionContext executionContext = createExecutionContext(uploadArchiveRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new UploadArchiveRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(uploadArchiveRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false), new UploadArchiveResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
*
* This operation uploads a part of an archive. You can upload archive parts in any order. You can also upload them
* in parallel. You can upload up to 10,000 parts for a multipart upload.
*
*
* Amazon Glacier rejects your upload part request if any of the following conditions is true:
*
*
* -
*
* SHA256 tree hash does not matchTo ensure that part data is not corrupted in transmission, you compute a
* SHA256 tree hash of the part and include it in your request. Upon receiving the part data, Amazon Glacier also
* computes a SHA256 tree hash. If these hash values don't match, the operation fails. For information about
* computing a SHA256 tree hash, see Computing Checksums.
*
*
* -
*
* Part size does not matchThe size of each part except the last must match the size specified in the
* corresponding InitiateMultipartUpload request. The size of the last part must be the same size as, or
* smaller than, the specified size.
*
*
*
* If you upload a part whose size is smaller than the part size you specified in your initiate multipart upload
* request and that part is not the last part, then the upload part request will succeed. However, the subsequent
* Complete Multipart Upload request will fail.
*
*
* - Range does not alignThe byte range value in the request does not align with the part size specified in
* the corresponding initiate request. For example, if you specify a part size of 4194304 bytes (4 MB), then 0 to
* 4194303 bytes (4 MB - 1) and 4194304 (4 MB) to 8388607 (8 MB - 1) are valid part ranges. However, if you set a
* range value of 2 MB to 6 MB, the range does not align with the part size and the upload will fail.
*
*
* This operation is idempotent. If you upload the same part multiple times, the data included in the most recent
* request overwrites the previously uploaded data.
*
*
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see Access Control
* Using AWS Identity and Access Management (IAM).
*
*
* For conceptual information and underlying REST API, go to Uploading Large Archives in
* Parts (Multipart Upload) and Upload Part in the Amazon
* Glacier Developer Guide.
*
*
* @param uploadMultipartPartRequest
* Provides options to upload a part of an archive in a multipart upload operation.
* @return Result of the UploadMultipartPart operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource, such as a vault, upload ID, or job ID, does not exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws RequestTimeoutException
* Returned if, when uploading an archive, Amazon Glacier times out while receiving the upload.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.UploadMultipartPart
*/
@Override
public UploadMultipartPartResult uploadMultipartPart(UploadMultipartPartRequest uploadMultipartPartRequest) {
ExecutionContext executionContext = createExecutionContext(uploadMultipartPartRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request request = null;
Response response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request = new UploadMultipartPartRequestMarshaller(protocolFactory).marshall(super.beforeMarshalling(uploadMultipartPartRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
HttpResponseHandler> responseHandler = protocolFactory.createResponseHandler(
new JsonOperationMetadata().withPayloadJson(true).withHasStreamingSuccessResponse(false), new UploadMultipartPartResultJsonUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
* Returns additional metadata for a previously executed successful, request, typically used for debugging issues
* where a service isn't acting as expected. This data isn't considered part of the result data returned by an
* operation, so it's available through this separate, diagnostic interface.
*
* Response metadata is only cached for a limited period of time, so if you need to access this extra diagnostic
* information for an executed request, you should use this method to retrieve it as soon as possible after
* executing the request.
*
* @param request
* The originally executed request
*
* @return The response metadata for the specified request, or null if none is available.
*/
public ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request) {
return client.getResponseMetadataForRequest(request);
}
/**
* Normal invoke with authentication. Credentials are required and may be overriden at the request level.
**/
private Response invoke(Request request, HttpResponseHandler> responseHandler,
ExecutionContext executionContext) {
executionContext.setCredentialsProvider(CredentialUtils.getCredentialsProvider(request.getOriginalRequest(), awsCredentialsProvider));
return doInvoke(request, responseHandler, executionContext);
}
/**
* Invoke with no authentication. Credentials are not required and any credentials set on the client or request will
* be ignored for this operation.
**/
private Response anonymousInvoke(Request request,
HttpResponseHandler> responseHandler, ExecutionContext executionContext) {
return doInvoke(request, responseHandler, executionContext);
}
/**
* Invoke the request using the http client. Assumes credentials (or lack thereof) have been configured in the
* ExecutionContext beforehand.
**/
private Response doInvoke(Request request, HttpResponseHandler> responseHandler,
ExecutionContext executionContext) {
request.setEndpoint(endpoint);
request.setTimeOffset(timeOffset);
HttpResponseHandler errorResponseHandler = protocolFactory.createErrorResponseHandler(new JsonErrorResponseMetadata()
.withCustomErrorCodeFieldName("code"));
return client.execute(request, responseHandler, errorResponseHandler, executionContext);
}
public AmazonGlacierWaiters waiters() {
if (waiters == null) {
synchronized (this) {
if (waiters == null) {
waiters = new AmazonGlacierWaiters(this);
}
}
}
return waiters;
}
}