com.amazonaws.services.kinesisfirehose.AmazonKinesisFirehoseAsync Maven / Gradle / Ivy
Show all versions of aws-java-sdk-kinesis Show documentation
/*
* Copyright 2016-2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with
* the License. A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions
* and limitations under the License.
*/
package com.amazonaws.services.kinesisfirehose;
import javax.annotation.Generated;
import com.amazonaws.services.kinesisfirehose.model.*;
/**
* Interface for accessing Firehose asynchronously. Each asynchronous method will return a Java Future object
* representing the asynchronous operation; overloads which accept an {@code AsyncHandler} can be used to receive
* notification when an asynchronous operation completes.
*
* Note: Do not directly implement this interface, new methods are added to it regularly. Extend from
* {@link com.amazonaws.services.kinesisfirehose.AbstractAmazonKinesisFirehoseAsync} instead.
*
*
* Amazon Kinesis Data Firehose API Reference
*
* Amazon Kinesis Data Firehose is a fully managed service that delivers real-time streaming data to destinations such
* as Amazon Simple Storage Service (Amazon S3), Amazon Elasticsearch Service (Amazon ES), Amazon Redshift, and Splunk.
*
*/
@Generated("com.amazonaws:aws-java-sdk-code-generator")
public interface AmazonKinesisFirehoseAsync extends AmazonKinesisFirehose {
/**
*
* Creates a Kinesis Data Firehose delivery stream.
*
*
* By default, you can create up to 50 delivery streams per AWS Region.
*
*
* This is an asynchronous operation that immediately returns. The initial status of the delivery stream is
* CREATING
. After the delivery stream is created, its status is ACTIVE
and it now accepts
* data. If the delivery stream creation fails, the status transitions to CREATING_FAILED
. Attempts to
* send data to a delivery stream that is not in the ACTIVE
state cause an exception. To check the
* state of a delivery stream, use DescribeDeliveryStream.
*
*
* If the status of a delivery stream is CREATING_FAILED
, this status doesn't change, and you can't
* invoke CreateDeliveryStream
again on it. However, you can invoke the DeleteDeliveryStream
* operation to delete it.
*
*
* A Kinesis Data Firehose delivery stream can be configured to receive records directly from providers using
* PutRecord or PutRecordBatch, or it can be configured to use an existing Kinesis stream as its
* source. To specify a Kinesis data stream as input, set the DeliveryStreamType
parameter to
* KinesisStreamAsSource
, and provide the Kinesis stream Amazon Resource Name (ARN) and role ARN in the
* KinesisStreamSourceConfiguration
parameter.
*
*
* To create a delivery stream with server-side encryption (SSE) enabled, include
* DeliveryStreamEncryptionConfigurationInput in your request. This is optional. You can also invoke
* StartDeliveryStreamEncryption to turn on SSE for an existing delivery stream that doesn't have SSE
* enabled.
*
*
* A delivery stream is configured with a single destination: Amazon S3, Amazon ES, Amazon Redshift, or Splunk. You
* must specify only one of the following destination configuration parameters:
* ExtendedS3DestinationConfiguration
, S3DestinationConfiguration
,
* ElasticsearchDestinationConfiguration
, RedshiftDestinationConfiguration
, or
* SplunkDestinationConfiguration
.
*
*
* When you specify S3DestinationConfiguration
, you can also provide the following optional values:
* BufferingHints, EncryptionConfiguration
, and CompressionFormat
. By default, if no
* BufferingHints
value is provided, Kinesis Data Firehose buffers data up to 5 MB or for 5 minutes,
* whichever condition is satisfied first. BufferingHints
is a hint, so there are some cases where the
* service cannot adhere to these conditions strictly. For example, record boundaries might be such that the size is
* a little over or under the configured buffering size. By default, no encryption is performed. We strongly
* recommend that you enable encryption to ensure secure data storage in Amazon S3.
*
*
* A few notes about Amazon Redshift as a destination:
*
*
* -
*
* An Amazon Redshift destination requires an S3 bucket as intermediate location. Kinesis Data Firehose first
* delivers data to Amazon S3 and then uses COPY
syntax to load data into an Amazon Redshift table.
* This is specified in the RedshiftDestinationConfiguration.S3Configuration
parameter.
*
*
* -
*
* The compression formats SNAPPY
or ZIP
cannot be specified in
* RedshiftDestinationConfiguration.S3Configuration
because the Amazon Redshift COPY
* operation that reads from the S3 bucket doesn't support these compression formats.
*
*
* -
*
* We strongly recommend that you use the user name and password you provide exclusively with Kinesis Data Firehose,
* and that the permissions for the account are restricted for Amazon Redshift INSERT
permissions.
*
*
*
*
* Kinesis Data Firehose assumes the IAM role that is configured as part of the destination. The role should allow
* the Kinesis Data Firehose principal to assume the role, and the role should have permissions that allow the
* service to deliver the data. For more information, see Grant Kinesis Data
* Firehose Access to an Amazon S3 Destination in the Amazon Kinesis Data Firehose Developer Guide.
*
*
* @param createDeliveryStreamRequest
* @return A Java Future containing the result of the CreateDeliveryStream operation returned by the service.
* @sample AmazonKinesisFirehoseAsync.CreateDeliveryStream
* @see AWS
* API Documentation
*/
java.util.concurrent.Future createDeliveryStreamAsync(CreateDeliveryStreamRequest createDeliveryStreamRequest);
/**
*
* Creates a Kinesis Data Firehose delivery stream.
*
*
* By default, you can create up to 50 delivery streams per AWS Region.
*
*
* This is an asynchronous operation that immediately returns. The initial status of the delivery stream is
* CREATING
. After the delivery stream is created, its status is ACTIVE
and it now accepts
* data. If the delivery stream creation fails, the status transitions to CREATING_FAILED
. Attempts to
* send data to a delivery stream that is not in the ACTIVE
state cause an exception. To check the
* state of a delivery stream, use DescribeDeliveryStream.
*
*
* If the status of a delivery stream is CREATING_FAILED
, this status doesn't change, and you can't
* invoke CreateDeliveryStream
again on it. However, you can invoke the DeleteDeliveryStream
* operation to delete it.
*
*
* A Kinesis Data Firehose delivery stream can be configured to receive records directly from providers using
* PutRecord or PutRecordBatch, or it can be configured to use an existing Kinesis stream as its
* source. To specify a Kinesis data stream as input, set the DeliveryStreamType
parameter to
* KinesisStreamAsSource
, and provide the Kinesis stream Amazon Resource Name (ARN) and role ARN in the
* KinesisStreamSourceConfiguration
parameter.
*
*
* To create a delivery stream with server-side encryption (SSE) enabled, include
* DeliveryStreamEncryptionConfigurationInput in your request. This is optional. You can also invoke
* StartDeliveryStreamEncryption to turn on SSE for an existing delivery stream that doesn't have SSE
* enabled.
*
*
* A delivery stream is configured with a single destination: Amazon S3, Amazon ES, Amazon Redshift, or Splunk. You
* must specify only one of the following destination configuration parameters:
* ExtendedS3DestinationConfiguration
, S3DestinationConfiguration
,
* ElasticsearchDestinationConfiguration
, RedshiftDestinationConfiguration
, or
* SplunkDestinationConfiguration
.
*
*
* When you specify S3DestinationConfiguration
, you can also provide the following optional values:
* BufferingHints, EncryptionConfiguration
, and CompressionFormat
. By default, if no
* BufferingHints
value is provided, Kinesis Data Firehose buffers data up to 5 MB or for 5 minutes,
* whichever condition is satisfied first. BufferingHints
is a hint, so there are some cases where the
* service cannot adhere to these conditions strictly. For example, record boundaries might be such that the size is
* a little over or under the configured buffering size. By default, no encryption is performed. We strongly
* recommend that you enable encryption to ensure secure data storage in Amazon S3.
*
*
* A few notes about Amazon Redshift as a destination:
*
*
* -
*
* An Amazon Redshift destination requires an S3 bucket as intermediate location. Kinesis Data Firehose first
* delivers data to Amazon S3 and then uses COPY
syntax to load data into an Amazon Redshift table.
* This is specified in the RedshiftDestinationConfiguration.S3Configuration
parameter.
*
*
* -
*
* The compression formats SNAPPY
or ZIP
cannot be specified in
* RedshiftDestinationConfiguration.S3Configuration
because the Amazon Redshift COPY
* operation that reads from the S3 bucket doesn't support these compression formats.
*
*
* -
*
* We strongly recommend that you use the user name and password you provide exclusively with Kinesis Data Firehose,
* and that the permissions for the account are restricted for Amazon Redshift INSERT
permissions.
*
*
*
*
* Kinesis Data Firehose assumes the IAM role that is configured as part of the destination. The role should allow
* the Kinesis Data Firehose principal to assume the role, and the role should have permissions that allow the
* service to deliver the data. For more information, see Grant Kinesis Data
* Firehose Access to an Amazon S3 Destination in the Amazon Kinesis Data Firehose Developer Guide.
*
*
* @param createDeliveryStreamRequest
* @param asyncHandler
* Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
* implementation of the callback methods in this interface to receive notification of successful or
* unsuccessful completion of the operation.
* @return A Java Future containing the result of the CreateDeliveryStream operation returned by the service.
* @sample AmazonKinesisFirehoseAsyncHandler.CreateDeliveryStream
* @see AWS
* API Documentation
*/
java.util.concurrent.Future createDeliveryStreamAsync(CreateDeliveryStreamRequest createDeliveryStreamRequest,
com.amazonaws.handlers.AsyncHandler asyncHandler);
/**
*
* Deletes a delivery stream and its data.
*
*
* To check the state of a delivery stream, use DescribeDeliveryStream. You can delete a delivery stream only
* if it is in one of the following states: ACTIVE
, DELETING
, CREATING_FAILED
* , or DELETING_FAILED
. You can't delete a delivery stream that is in the CREATING
state.
* While the deletion request is in process, the delivery stream is in the DELETING
state.
*
*
* While the delivery stream is in the DELETING
state, the service might continue to accept records,
* but it doesn't make any guarantees with respect to delivering the data. Therefore, as a best practice, first stop
* any applications that are sending records before you delete a delivery stream.
*
*
* @param deleteDeliveryStreamRequest
* @return A Java Future containing the result of the DeleteDeliveryStream operation returned by the service.
* @sample AmazonKinesisFirehoseAsync.DeleteDeliveryStream
* @see AWS
* API Documentation
*/
java.util.concurrent.Future deleteDeliveryStreamAsync(DeleteDeliveryStreamRequest deleteDeliveryStreamRequest);
/**
*
* Deletes a delivery stream and its data.
*
*
* To check the state of a delivery stream, use DescribeDeliveryStream. You can delete a delivery stream only
* if it is in one of the following states: ACTIVE
, DELETING
, CREATING_FAILED
* , or DELETING_FAILED
. You can't delete a delivery stream that is in the CREATING
state.
* While the deletion request is in process, the delivery stream is in the DELETING
state.
*
*
* While the delivery stream is in the DELETING
state, the service might continue to accept records,
* but it doesn't make any guarantees with respect to delivering the data. Therefore, as a best practice, first stop
* any applications that are sending records before you delete a delivery stream.
*
*
* @param deleteDeliveryStreamRequest
* @param asyncHandler
* Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
* implementation of the callback methods in this interface to receive notification of successful or
* unsuccessful completion of the operation.
* @return A Java Future containing the result of the DeleteDeliveryStream operation returned by the service.
* @sample AmazonKinesisFirehoseAsyncHandler.DeleteDeliveryStream
* @see AWS
* API Documentation
*/
java.util.concurrent.Future deleteDeliveryStreamAsync(DeleteDeliveryStreamRequest deleteDeliveryStreamRequest,
com.amazonaws.handlers.AsyncHandler asyncHandler);
/**
*
* Describes the specified delivery stream and its status. For example, after your delivery stream is created, call
* DescribeDeliveryStream
to see whether the delivery stream is ACTIVE
and therefore ready
* for data to be sent to it.
*
*
* If the status of a delivery stream is CREATING_FAILED
, this status doesn't change, and you can't
* invoke CreateDeliveryStream again on it. However, you can invoke the DeleteDeliveryStream operation
* to delete it. If the status is DELETING_FAILED
, you can force deletion by invoking
* DeleteDeliveryStream again but with DeleteDeliveryStreamInput$AllowForceDelete set to true.
*
*
* @param describeDeliveryStreamRequest
* @return A Java Future containing the result of the DescribeDeliveryStream operation returned by the service.
* @sample AmazonKinesisFirehoseAsync.DescribeDeliveryStream
* @see AWS API Documentation
*/
java.util.concurrent.Future describeDeliveryStreamAsync(DescribeDeliveryStreamRequest describeDeliveryStreamRequest);
/**
*
* Describes the specified delivery stream and its status. For example, after your delivery stream is created, call
* DescribeDeliveryStream
to see whether the delivery stream is ACTIVE
and therefore ready
* for data to be sent to it.
*
*
* If the status of a delivery stream is CREATING_FAILED
, this status doesn't change, and you can't
* invoke CreateDeliveryStream again on it. However, you can invoke the DeleteDeliveryStream operation
* to delete it. If the status is DELETING_FAILED
, you can force deletion by invoking
* DeleteDeliveryStream again but with DeleteDeliveryStreamInput$AllowForceDelete set to true.
*
*
* @param describeDeliveryStreamRequest
* @param asyncHandler
* Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
* implementation of the callback methods in this interface to receive notification of successful or
* unsuccessful completion of the operation.
* @return A Java Future containing the result of the DescribeDeliveryStream operation returned by the service.
* @sample AmazonKinesisFirehoseAsyncHandler.DescribeDeliveryStream
* @see AWS API Documentation
*/
java.util.concurrent.Future describeDeliveryStreamAsync(DescribeDeliveryStreamRequest describeDeliveryStreamRequest,
com.amazonaws.handlers.AsyncHandler asyncHandler);
/**
*
* Lists your delivery streams in alphabetical order of their names.
*
*
* The number of delivery streams might be too large to return using a single call to
* ListDeliveryStreams
. You can limit the number of delivery streams returned, using the
* Limit
parameter. To determine whether there are more delivery streams to list, check the value of
* HasMoreDeliveryStreams
in the output. If there are more delivery streams to list, you can request
* them by calling this operation again and setting the ExclusiveStartDeliveryStreamName
parameter to
* the name of the last delivery stream returned in the last call.
*
*
* @param listDeliveryStreamsRequest
* @return A Java Future containing the result of the ListDeliveryStreams operation returned by the service.
* @sample AmazonKinesisFirehoseAsync.ListDeliveryStreams
* @see AWS
* API Documentation
*/
java.util.concurrent.Future listDeliveryStreamsAsync(ListDeliveryStreamsRequest listDeliveryStreamsRequest);
/**
*
* Lists your delivery streams in alphabetical order of their names.
*
*
* The number of delivery streams might be too large to return using a single call to
* ListDeliveryStreams
. You can limit the number of delivery streams returned, using the
* Limit
parameter. To determine whether there are more delivery streams to list, check the value of
* HasMoreDeliveryStreams
in the output. If there are more delivery streams to list, you can request
* them by calling this operation again and setting the ExclusiveStartDeliveryStreamName
parameter to
* the name of the last delivery stream returned in the last call.
*
*
* @param listDeliveryStreamsRequest
* @param asyncHandler
* Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
* implementation of the callback methods in this interface to receive notification of successful or
* unsuccessful completion of the operation.
* @return A Java Future containing the result of the ListDeliveryStreams operation returned by the service.
* @sample AmazonKinesisFirehoseAsyncHandler.ListDeliveryStreams
* @see AWS
* API Documentation
*/
java.util.concurrent.Future listDeliveryStreamsAsync(ListDeliveryStreamsRequest listDeliveryStreamsRequest,
com.amazonaws.handlers.AsyncHandler asyncHandler);
/**
*
* Lists the tags for the specified delivery stream. This operation has a limit of five transactions per second per
* account.
*
*
* @param listTagsForDeliveryStreamRequest
* @return A Java Future containing the result of the ListTagsForDeliveryStream operation returned by the service.
* @sample AmazonKinesisFirehoseAsync.ListTagsForDeliveryStream
* @see AWS API Documentation
*/
java.util.concurrent.Future listTagsForDeliveryStreamAsync(
ListTagsForDeliveryStreamRequest listTagsForDeliveryStreamRequest);
/**
*
* Lists the tags for the specified delivery stream. This operation has a limit of five transactions per second per
* account.
*
*
* @param listTagsForDeliveryStreamRequest
* @param asyncHandler
* Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
* implementation of the callback methods in this interface to receive notification of successful or
* unsuccessful completion of the operation.
* @return A Java Future containing the result of the ListTagsForDeliveryStream operation returned by the service.
* @sample AmazonKinesisFirehoseAsyncHandler.ListTagsForDeliveryStream
* @see AWS API Documentation
*/
java.util.concurrent.Future listTagsForDeliveryStreamAsync(
ListTagsForDeliveryStreamRequest listTagsForDeliveryStreamRequest,
com.amazonaws.handlers.AsyncHandler asyncHandler);
/**
*
* Writes a single data record into an Amazon Kinesis Data Firehose delivery stream. To write multiple data records
* into a delivery stream, use PutRecordBatch. Applications using these operations are referred to as
* producers.
*
*
* By default, each delivery stream can take in up to 2,000 transactions per second, 5,000 records per second, or 5
* MB per second. If you use PutRecord and PutRecordBatch, the limits are an aggregate across these
* two operations for each delivery stream. For more information about limits and how to request an increase, see Amazon Kinesis Data Firehose Limits.
*
*
* You must specify the name of the delivery stream and the data record when using PutRecord. The data record
* consists of a data blob that can be up to 1,000 KB in size, and any kind of data. For example, it can be a
* segment from a log file, geographic location data, website clickstream data, and so on.
*
*
* Kinesis Data Firehose buffers records before delivering them to the destination. To disambiguate the data blobs
* at the destination, a common solution is to use delimiters in the data, such as a newline (\n
) or
* some other character unique within the data. This allows the consumer application to parse individual data items
* when reading the data from the destination.
*
*
* The PutRecord
operation returns a RecordId
, which is a unique string assigned to each
* record. Producer applications can use this ID for purposes such as auditability and investigation.
*
*
* If the PutRecord
operation throws a ServiceUnavailableException
, back off and retry. If
* the exception persists, it is possible that the throughput limits have been exceeded for the delivery stream.
*
*
* Data records sent to Kinesis Data Firehose are stored for 24 hours from the time they are added to a delivery
* stream as it tries to send the records to the destination. If the destination is unreachable for more than 24
* hours, the data is no longer available.
*
*
*
* Don't concatenate two or more base64 strings to form the data fields of your records. Instead, concatenate the
* raw data, then perform base64 encoding.
*
*
*
* @param putRecordRequest
* @return A Java Future containing the result of the PutRecord operation returned by the service.
* @sample AmazonKinesisFirehoseAsync.PutRecord
* @see AWS API
* Documentation
*/
java.util.concurrent.Future putRecordAsync(PutRecordRequest putRecordRequest);
/**
*
* Writes a single data record into an Amazon Kinesis Data Firehose delivery stream. To write multiple data records
* into a delivery stream, use PutRecordBatch. Applications using these operations are referred to as
* producers.
*
*
* By default, each delivery stream can take in up to 2,000 transactions per second, 5,000 records per second, or 5
* MB per second. If you use PutRecord and PutRecordBatch, the limits are an aggregate across these
* two operations for each delivery stream. For more information about limits and how to request an increase, see Amazon Kinesis Data Firehose Limits.
*
*
* You must specify the name of the delivery stream and the data record when using PutRecord. The data record
* consists of a data blob that can be up to 1,000 KB in size, and any kind of data. For example, it can be a
* segment from a log file, geographic location data, website clickstream data, and so on.
*
*
* Kinesis Data Firehose buffers records before delivering them to the destination. To disambiguate the data blobs
* at the destination, a common solution is to use delimiters in the data, such as a newline (\n
) or
* some other character unique within the data. This allows the consumer application to parse individual data items
* when reading the data from the destination.
*
*
* The PutRecord
operation returns a RecordId
, which is a unique string assigned to each
* record. Producer applications can use this ID for purposes such as auditability and investigation.
*
*
* If the PutRecord
operation throws a ServiceUnavailableException
, back off and retry. If
* the exception persists, it is possible that the throughput limits have been exceeded for the delivery stream.
*
*
* Data records sent to Kinesis Data Firehose are stored for 24 hours from the time they are added to a delivery
* stream as it tries to send the records to the destination. If the destination is unreachable for more than 24
* hours, the data is no longer available.
*
*
*
* Don't concatenate two or more base64 strings to form the data fields of your records. Instead, concatenate the
* raw data, then perform base64 encoding.
*
*
*
* @param putRecordRequest
* @param asyncHandler
* Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
* implementation of the callback methods in this interface to receive notification of successful or
* unsuccessful completion of the operation.
* @return A Java Future containing the result of the PutRecord operation returned by the service.
* @sample AmazonKinesisFirehoseAsyncHandler.PutRecord
* @see AWS API
* Documentation
*/
java.util.concurrent.Future putRecordAsync(PutRecordRequest putRecordRequest,
com.amazonaws.handlers.AsyncHandler asyncHandler);
/**
*
* Writes multiple data records into a delivery stream in a single call, which can achieve higher throughput per
* producer than when writing single records. To write single data records into a delivery stream, use
* PutRecord. Applications using these operations are referred to as producers.
*
*
* For information about service quota, see Amazon Kinesis Data Firehose Quota.
*
*
* Each PutRecordBatch request supports up to 500 records. Each record in the request can be as large as
* 1,000 KB (before 64-bit encoding), up to a limit of 4 MB for the entire request. These limits cannot be changed.
*
*
* You must specify the name of the delivery stream and the data record when using PutRecord. The data record
* consists of a data blob that can be up to 1,000 KB in size, and any kind of data. For example, it could be a
* segment from a log file, geographic location data, website clickstream data, and so on.
*
*
* Kinesis Data Firehose buffers records before delivering them to the destination. To disambiguate the data blobs
* at the destination, a common solution is to use delimiters in the data, such as a newline (\n
) or
* some other character unique within the data. This allows the consumer application to parse individual data items
* when reading the data from the destination.
*
*
* The PutRecordBatch response includes a count of failed records, FailedPutCount
, and an array
* of responses, RequestResponses
. Even if the PutRecordBatch call succeeds, the value of
* FailedPutCount
may be greater than 0, indicating that there are records for which the operation
* didn't succeed. Each entry in the RequestResponses
array provides additional information about the
* processed record. It directly correlates with a record in the request array using the same ordering, from the top
* to the bottom. The response array always includes the same number of records as the request array.
* RequestResponses
includes both successfully and unsuccessfully processed records. Kinesis Data
* Firehose tries to process all records in each PutRecordBatch request. A single record failure does not
* stop the processing of subsequent records.
*
*
* A successfully processed record includes a RecordId
value, which is unique for the record. An
* unsuccessfully processed record includes ErrorCode
and ErrorMessage
values.
* ErrorCode
reflects the type of error, and is one of the following values:
* ServiceUnavailableException
or InternalFailure
. ErrorMessage
provides more
* detailed information about the error.
*
*
* If there is an internal server error or a timeout, the write might have completed or it might have failed. If
* FailedPutCount
is greater than 0, retry the request, resending only those records that might have
* failed processing. This minimizes the possible duplicate records and also reduces the total bytes sent (and
* corresponding charges). We recommend that you handle any duplicates at the destination.
*
*
* If PutRecordBatch throws ServiceUnavailableException
, back off and retry. If the exception
* persists, it is possible that the throughput limits have been exceeded for the delivery stream.
*
*
* Data records sent to Kinesis Data Firehose are stored for 24 hours from the time they are added to a delivery
* stream as it attempts to send the records to the destination. If the destination is unreachable for more than 24
* hours, the data is no longer available.
*
*
*
* Don't concatenate two or more base64 strings to form the data fields of your records. Instead, concatenate the
* raw data, then perform base64 encoding.
*
*
*
* @param putRecordBatchRequest
* @return A Java Future containing the result of the PutRecordBatch operation returned by the service.
* @sample AmazonKinesisFirehoseAsync.PutRecordBatch
* @see AWS API
* Documentation
*/
java.util.concurrent.Future putRecordBatchAsync(PutRecordBatchRequest putRecordBatchRequest);
/**
*
* Writes multiple data records into a delivery stream in a single call, which can achieve higher throughput per
* producer than when writing single records. To write single data records into a delivery stream, use
* PutRecord. Applications using these operations are referred to as producers.
*
*
* For information about service quota, see Amazon Kinesis Data Firehose Quota.
*
*
* Each PutRecordBatch request supports up to 500 records. Each record in the request can be as large as
* 1,000 KB (before 64-bit encoding), up to a limit of 4 MB for the entire request. These limits cannot be changed.
*
*
* You must specify the name of the delivery stream and the data record when using PutRecord. The data record
* consists of a data blob that can be up to 1,000 KB in size, and any kind of data. For example, it could be a
* segment from a log file, geographic location data, website clickstream data, and so on.
*
*
* Kinesis Data Firehose buffers records before delivering them to the destination. To disambiguate the data blobs
* at the destination, a common solution is to use delimiters in the data, such as a newline (\n
) or
* some other character unique within the data. This allows the consumer application to parse individual data items
* when reading the data from the destination.
*
*
* The PutRecordBatch response includes a count of failed records, FailedPutCount
, and an array
* of responses, RequestResponses
. Even if the PutRecordBatch call succeeds, the value of
* FailedPutCount
may be greater than 0, indicating that there are records for which the operation
* didn't succeed. Each entry in the RequestResponses
array provides additional information about the
* processed record. It directly correlates with a record in the request array using the same ordering, from the top
* to the bottom. The response array always includes the same number of records as the request array.
* RequestResponses
includes both successfully and unsuccessfully processed records. Kinesis Data
* Firehose tries to process all records in each PutRecordBatch request. A single record failure does not
* stop the processing of subsequent records.
*
*
* A successfully processed record includes a RecordId
value, which is unique for the record. An
* unsuccessfully processed record includes ErrorCode
and ErrorMessage
values.
* ErrorCode
reflects the type of error, and is one of the following values:
* ServiceUnavailableException
or InternalFailure
. ErrorMessage
provides more
* detailed information about the error.
*
*
* If there is an internal server error or a timeout, the write might have completed or it might have failed. If
* FailedPutCount
is greater than 0, retry the request, resending only those records that might have
* failed processing. This minimizes the possible duplicate records and also reduces the total bytes sent (and
* corresponding charges). We recommend that you handle any duplicates at the destination.
*
*
* If PutRecordBatch throws ServiceUnavailableException
, back off and retry. If the exception
* persists, it is possible that the throughput limits have been exceeded for the delivery stream.
*
*
* Data records sent to Kinesis Data Firehose are stored for 24 hours from the time they are added to a delivery
* stream as it attempts to send the records to the destination. If the destination is unreachable for more than 24
* hours, the data is no longer available.
*
*
*
* Don't concatenate two or more base64 strings to form the data fields of your records. Instead, concatenate the
* raw data, then perform base64 encoding.
*
*
*
* @param putRecordBatchRequest
* @param asyncHandler
* Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
* implementation of the callback methods in this interface to receive notification of successful or
* unsuccessful completion of the operation.
* @return A Java Future containing the result of the PutRecordBatch operation returned by the service.
* @sample AmazonKinesisFirehoseAsyncHandler.PutRecordBatch
* @see AWS API
* Documentation
*/
java.util.concurrent.Future putRecordBatchAsync(PutRecordBatchRequest putRecordBatchRequest,
com.amazonaws.handlers.AsyncHandler asyncHandler);
/**
*
* Enables server-side encryption (SSE) for the delivery stream.
*
*
* This operation is asynchronous. It returns immediately. When you invoke it, Kinesis Data Firehose first sets the
* encryption status of the stream to ENABLING
, and then to ENABLED
. The encryption status
* of a delivery stream is the Status
property in DeliveryStreamEncryptionConfiguration. If the
* operation fails, the encryption status changes to ENABLING_FAILED
. You can continue to read and
* write data to your delivery stream while the encryption status is ENABLING
, but the data is not
* encrypted. It can take up to 5 seconds after the encryption status changes to ENABLED
before all
* records written to the delivery stream are encrypted. To find out whether a record or a batch of records was
* encrypted, check the response elements PutRecordOutput$Encrypted and
* PutRecordBatchOutput$Encrypted, respectively.
*
*
* To check the encryption status of a delivery stream, use DescribeDeliveryStream.
*
*
* Even if encryption is currently enabled for a delivery stream, you can still invoke this operation on it to
* change the ARN of the CMK or both its type and ARN. If you invoke this method to change the CMK, and the old CMK
* is of type CUSTOMER_MANAGED_CMK
, Kinesis Data Firehose schedules the grant it had on the old CMK for
* retirement. If the new CMK is of type CUSTOMER_MANAGED_CMK
, Kinesis Data Firehose creates a grant
* that enables it to use the new CMK to encrypt and decrypt data and to manage the grant.
*
*
* If a delivery stream already has encryption enabled and then you invoke this operation to change the ARN of the
* CMK or both its type and ARN and you get ENABLING_FAILED
, this only means that the attempt to change
* the CMK failed. In this case, encryption remains enabled with the old CMK.
*
*
* If the encryption status of your delivery stream is ENABLING_FAILED
, you can invoke this operation
* again with a valid CMK. The CMK must be enabled and the key policy mustn't explicitly deny the permission for
* Kinesis Data Firehose to invoke KMS encrypt and decrypt operations.
*
*
* You can enable SSE for a delivery stream only if it's a delivery stream that uses DirectPut
as its
* source.
*
*
* The StartDeliveryStreamEncryption
and StopDeliveryStreamEncryption
operations have a
* combined limit of 25 calls per delivery stream per 24 hours. For example, you reach the limit if you call
* StartDeliveryStreamEncryption
13 times and StopDeliveryStreamEncryption
12 times for
* the same delivery stream in a 24-hour period.
*
*
* @param startDeliveryStreamEncryptionRequest
* @return A Java Future containing the result of the StartDeliveryStreamEncryption operation returned by the
* service.
* @sample AmazonKinesisFirehoseAsync.StartDeliveryStreamEncryption
* @see AWS API Documentation
*/
java.util.concurrent.Future startDeliveryStreamEncryptionAsync(
StartDeliveryStreamEncryptionRequest startDeliveryStreamEncryptionRequest);
/**
*
* Enables server-side encryption (SSE) for the delivery stream.
*
*
* This operation is asynchronous. It returns immediately. When you invoke it, Kinesis Data Firehose first sets the
* encryption status of the stream to ENABLING
, and then to ENABLED
. The encryption status
* of a delivery stream is the Status
property in DeliveryStreamEncryptionConfiguration. If the
* operation fails, the encryption status changes to ENABLING_FAILED
. You can continue to read and
* write data to your delivery stream while the encryption status is ENABLING
, but the data is not
* encrypted. It can take up to 5 seconds after the encryption status changes to ENABLED
before all
* records written to the delivery stream are encrypted. To find out whether a record or a batch of records was
* encrypted, check the response elements PutRecordOutput$Encrypted and
* PutRecordBatchOutput$Encrypted, respectively.
*
*
* To check the encryption status of a delivery stream, use DescribeDeliveryStream.
*
*
* Even if encryption is currently enabled for a delivery stream, you can still invoke this operation on it to
* change the ARN of the CMK or both its type and ARN. If you invoke this method to change the CMK, and the old CMK
* is of type CUSTOMER_MANAGED_CMK
, Kinesis Data Firehose schedules the grant it had on the old CMK for
* retirement. If the new CMK is of type CUSTOMER_MANAGED_CMK
, Kinesis Data Firehose creates a grant
* that enables it to use the new CMK to encrypt and decrypt data and to manage the grant.
*
*
* If a delivery stream already has encryption enabled and then you invoke this operation to change the ARN of the
* CMK or both its type and ARN and you get ENABLING_FAILED
, this only means that the attempt to change
* the CMK failed. In this case, encryption remains enabled with the old CMK.
*
*
* If the encryption status of your delivery stream is ENABLING_FAILED
, you can invoke this operation
* again with a valid CMK. The CMK must be enabled and the key policy mustn't explicitly deny the permission for
* Kinesis Data Firehose to invoke KMS encrypt and decrypt operations.
*
*
* You can enable SSE for a delivery stream only if it's a delivery stream that uses DirectPut
as its
* source.
*
*
* The StartDeliveryStreamEncryption
and StopDeliveryStreamEncryption
operations have a
* combined limit of 25 calls per delivery stream per 24 hours. For example, you reach the limit if you call
* StartDeliveryStreamEncryption
13 times and StopDeliveryStreamEncryption
12 times for
* the same delivery stream in a 24-hour period.
*
*
* @param startDeliveryStreamEncryptionRequest
* @param asyncHandler
* Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
* implementation of the callback methods in this interface to receive notification of successful or
* unsuccessful completion of the operation.
* @return A Java Future containing the result of the StartDeliveryStreamEncryption operation returned by the
* service.
* @sample AmazonKinesisFirehoseAsyncHandler.StartDeliveryStreamEncryption
* @see AWS API Documentation
*/
java.util.concurrent.Future startDeliveryStreamEncryptionAsync(
StartDeliveryStreamEncryptionRequest startDeliveryStreamEncryptionRequest,
com.amazonaws.handlers.AsyncHandler asyncHandler);
/**
*
* Disables server-side encryption (SSE) for the delivery stream.
*
*
* This operation is asynchronous. It returns immediately. When you invoke it, Kinesis Data Firehose first sets the
* encryption status of the stream to DISABLING
, and then to DISABLED
. You can continue to
* read and write data to your stream while its status is DISABLING
. It can take up to 5 seconds after
* the encryption status changes to DISABLED
before all records written to the delivery stream are no
* longer subject to encryption. To find out whether a record or a batch of records was encrypted, check the
* response elements PutRecordOutput$Encrypted and PutRecordBatchOutput$Encrypted, respectively.
*
*
* To check the encryption state of a delivery stream, use DescribeDeliveryStream.
*
*
* If SSE is enabled using a customer managed CMK and then you invoke StopDeliveryStreamEncryption
,
* Kinesis Data Firehose schedules the related KMS grant for retirement and then retires it after it ensures that it
* is finished delivering records to the destination.
*
*
* The StartDeliveryStreamEncryption
and StopDeliveryStreamEncryption
operations have a
* combined limit of 25 calls per delivery stream per 24 hours. For example, you reach the limit if you call
* StartDeliveryStreamEncryption
13 times and StopDeliveryStreamEncryption
12 times for
* the same delivery stream in a 24-hour period.
*
*
* @param stopDeliveryStreamEncryptionRequest
* @return A Java Future containing the result of the StopDeliveryStreamEncryption operation returned by the
* service.
* @sample AmazonKinesisFirehoseAsync.StopDeliveryStreamEncryption
* @see AWS API Documentation
*/
java.util.concurrent.Future stopDeliveryStreamEncryptionAsync(
StopDeliveryStreamEncryptionRequest stopDeliveryStreamEncryptionRequest);
/**
*
* Disables server-side encryption (SSE) for the delivery stream.
*
*
* This operation is asynchronous. It returns immediately. When you invoke it, Kinesis Data Firehose first sets the
* encryption status of the stream to DISABLING
, and then to DISABLED
. You can continue to
* read and write data to your stream while its status is DISABLING
. It can take up to 5 seconds after
* the encryption status changes to DISABLED
before all records written to the delivery stream are no
* longer subject to encryption. To find out whether a record or a batch of records was encrypted, check the
* response elements PutRecordOutput$Encrypted and PutRecordBatchOutput$Encrypted, respectively.
*
*
* To check the encryption state of a delivery stream, use DescribeDeliveryStream.
*
*
* If SSE is enabled using a customer managed CMK and then you invoke StopDeliveryStreamEncryption
,
* Kinesis Data Firehose schedules the related KMS grant for retirement and then retires it after it ensures that it
* is finished delivering records to the destination.
*
*
* The StartDeliveryStreamEncryption
and StopDeliveryStreamEncryption
operations have a
* combined limit of 25 calls per delivery stream per 24 hours. For example, you reach the limit if you call
* StartDeliveryStreamEncryption
13 times and StopDeliveryStreamEncryption
12 times for
* the same delivery stream in a 24-hour period.
*
*
* @param stopDeliveryStreamEncryptionRequest
* @param asyncHandler
* Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
* implementation of the callback methods in this interface to receive notification of successful or
* unsuccessful completion of the operation.
* @return A Java Future containing the result of the StopDeliveryStreamEncryption operation returned by the
* service.
* @sample AmazonKinesisFirehoseAsyncHandler.StopDeliveryStreamEncryption
* @see AWS API Documentation
*/
java.util.concurrent.Future stopDeliveryStreamEncryptionAsync(
StopDeliveryStreamEncryptionRequest stopDeliveryStreamEncryptionRequest,
com.amazonaws.handlers.AsyncHandler asyncHandler);
/**
*
* Adds or updates tags for the specified delivery stream. A tag is a key-value pair that you can define and assign
* to AWS resources. If you specify a tag that already exists, the tag value is replaced with the value that you
* specify in the request. Tags are metadata. For example, you can add friendly names and descriptions or other
* types of information that can help you distinguish the delivery stream. For more information about tags, see Using Cost Allocation
* Tags in the AWS Billing and Cost Management User Guide.
*
*
* Each delivery stream can have up to 50 tags.
*
*
* This operation has a limit of five transactions per second per account.
*
*
* @param tagDeliveryStreamRequest
* @return A Java Future containing the result of the TagDeliveryStream operation returned by the service.
* @sample AmazonKinesisFirehoseAsync.TagDeliveryStream
* @see AWS API
* Documentation
*/
java.util.concurrent.Future tagDeliveryStreamAsync(TagDeliveryStreamRequest tagDeliveryStreamRequest);
/**
*
* Adds or updates tags for the specified delivery stream. A tag is a key-value pair that you can define and assign
* to AWS resources. If you specify a tag that already exists, the tag value is replaced with the value that you
* specify in the request. Tags are metadata. For example, you can add friendly names and descriptions or other
* types of information that can help you distinguish the delivery stream. For more information about tags, see Using Cost Allocation
* Tags in the AWS Billing and Cost Management User Guide.
*
*
* Each delivery stream can have up to 50 tags.
*
*
* This operation has a limit of five transactions per second per account.
*
*
* @param tagDeliveryStreamRequest
* @param asyncHandler
* Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
* implementation of the callback methods in this interface to receive notification of successful or
* unsuccessful completion of the operation.
* @return A Java Future containing the result of the TagDeliveryStream operation returned by the service.
* @sample AmazonKinesisFirehoseAsyncHandler.TagDeliveryStream
* @see AWS API
* Documentation
*/
java.util.concurrent.Future tagDeliveryStreamAsync(TagDeliveryStreamRequest tagDeliveryStreamRequest,
com.amazonaws.handlers.AsyncHandler asyncHandler);
/**
*
* Removes tags from the specified delivery stream. Removed tags are deleted, and you can't recover them after this
* operation successfully completes.
*
*
* If you specify a tag that doesn't exist, the operation ignores it.
*
*
* This operation has a limit of five transactions per second per account.
*
*
* @param untagDeliveryStreamRequest
* @return A Java Future containing the result of the UntagDeliveryStream operation returned by the service.
* @sample AmazonKinesisFirehoseAsync.UntagDeliveryStream
* @see AWS
* API Documentation
*/
java.util.concurrent.Future untagDeliveryStreamAsync(UntagDeliveryStreamRequest untagDeliveryStreamRequest);
/**
*
* Removes tags from the specified delivery stream. Removed tags are deleted, and you can't recover them after this
* operation successfully completes.
*
*
* If you specify a tag that doesn't exist, the operation ignores it.
*
*
* This operation has a limit of five transactions per second per account.
*
*
* @param untagDeliveryStreamRequest
* @param asyncHandler
* Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
* implementation of the callback methods in this interface to receive notification of successful or
* unsuccessful completion of the operation.
* @return A Java Future containing the result of the UntagDeliveryStream operation returned by the service.
* @sample AmazonKinesisFirehoseAsyncHandler.UntagDeliveryStream
* @see AWS
* API Documentation
*/
java.util.concurrent.Future untagDeliveryStreamAsync(UntagDeliveryStreamRequest untagDeliveryStreamRequest,
com.amazonaws.handlers.AsyncHandler asyncHandler);
/**
*
* Updates the specified destination of the specified delivery stream.
*
*
* Use this operation to change the destination type (for example, to replace the Amazon S3 destination with Amazon
* Redshift) or change the parameters associated with a destination (for example, to change the bucket name of the
* Amazon S3 destination). The update might not occur immediately. The target delivery stream remains active while
* the configurations are updated, so data writes to the delivery stream can continue during this process. The
* updated configurations are usually effective within a few minutes.
*
*
* Switching between Amazon ES and other services is not supported. For an Amazon ES destination, you can only
* update to another Amazon ES destination.
*
*
* If the destination type is the same, Kinesis Data Firehose merges the configuration parameters specified with the
* destination configuration that already exists on the delivery stream. If any of the parameters are not specified
* in the call, the existing values are retained. For example, in the Amazon S3 destination, if
* EncryptionConfiguration is not specified, then the existing EncryptionConfiguration
is
* maintained on the destination.
*
*
* If the destination type is not the same, for example, changing the destination from Amazon S3 to Amazon Redshift,
* Kinesis Data Firehose does not merge any parameters. In this case, all parameters must be specified.
*
*
* Kinesis Data Firehose uses CurrentDeliveryStreamVersionId
to avoid race conditions and conflicting
* merges. This is a required field, and the service updates the configuration only if the existing configuration
* has a version ID that matches. After the update is applied successfully, the version ID is updated, and can be
* retrieved using DescribeDeliveryStream. Use the new version ID to set
* CurrentDeliveryStreamVersionId
in the next call.
*
*
* @param updateDestinationRequest
* @return A Java Future containing the result of the UpdateDestination operation returned by the service.
* @sample AmazonKinesisFirehoseAsync.UpdateDestination
* @see AWS API
* Documentation
*/
java.util.concurrent.Future updateDestinationAsync(UpdateDestinationRequest updateDestinationRequest);
/**
*
* Updates the specified destination of the specified delivery stream.
*
*
* Use this operation to change the destination type (for example, to replace the Amazon S3 destination with Amazon
* Redshift) or change the parameters associated with a destination (for example, to change the bucket name of the
* Amazon S3 destination). The update might not occur immediately. The target delivery stream remains active while
* the configurations are updated, so data writes to the delivery stream can continue during this process. The
* updated configurations are usually effective within a few minutes.
*
*
* Switching between Amazon ES and other services is not supported. For an Amazon ES destination, you can only
* update to another Amazon ES destination.
*
*
* If the destination type is the same, Kinesis Data Firehose merges the configuration parameters specified with the
* destination configuration that already exists on the delivery stream. If any of the parameters are not specified
* in the call, the existing values are retained. For example, in the Amazon S3 destination, if
* EncryptionConfiguration is not specified, then the existing EncryptionConfiguration
is
* maintained on the destination.
*
*
* If the destination type is not the same, for example, changing the destination from Amazon S3 to Amazon Redshift,
* Kinesis Data Firehose does not merge any parameters. In this case, all parameters must be specified.
*
*
* Kinesis Data Firehose uses CurrentDeliveryStreamVersionId
to avoid race conditions and conflicting
* merges. This is a required field, and the service updates the configuration only if the existing configuration
* has a version ID that matches. After the update is applied successfully, the version ID is updated, and can be
* retrieved using DescribeDeliveryStream. Use the new version ID to set
* CurrentDeliveryStreamVersionId
in the next call.
*
*
* @param updateDestinationRequest
* @param asyncHandler
* Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
* implementation of the callback methods in this interface to receive notification of successful or
* unsuccessful completion of the operation.
* @return A Java Future containing the result of the UpdateDestination operation returned by the service.
* @sample AmazonKinesisFirehoseAsyncHandler.UpdateDestination
* @see AWS API
* Documentation
*/
java.util.concurrent.Future updateDestinationAsync(UpdateDestinationRequest updateDestinationRequest,
com.amazonaws.handlers.AsyncHandler asyncHandler);
}