com.amazonaws.services.kinesisfirehose.AmazonKinesisFirehose Maven / Gradle / Ivy
Show all versions of aws-java-sdk-kinesis Show documentation
/*
* Copyright 2019-2024 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with
* the License. A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions
* and limitations under the License.
*/
package com.amazonaws.services.kinesisfirehose;
import javax.annotation.Generated;
import com.amazonaws.*;
import com.amazonaws.regions.*;
import com.amazonaws.services.kinesisfirehose.model.*;
/**
* Interface for accessing Firehose.
*
* Note: Do not directly implement this interface, new methods are added to it regularly. Extend from
* {@link com.amazonaws.services.kinesisfirehose.AbstractAmazonKinesisFirehose} instead.
*
*
* Amazon Kinesis Data Firehose API Reference
*
* Amazon Kinesis Data Firehose is a fully managed service that delivers real-time streaming data to destinations such
* as Amazon Simple Storage Service (Amazon S3), Amazon OpenSearch Service, Amazon Redshift, Splunk, and various other
* supportd destinations.
*
*/
@Generated("com.amazonaws:aws-java-sdk-code-generator")
public interface AmazonKinesisFirehose {
/**
* The region metadata service name for computing region endpoints. You can use this value to retrieve metadata
* (such as supported regions) of the service.
*
* @see RegionUtils#getRegionsForService(String)
*/
String ENDPOINT_PREFIX = "firehose";
/**
* Overrides the default endpoint for this client ("https://firehose.us-east-1.amazonaws.com"). Callers can use this
* method to control which AWS region they want to work with.
*
* Callers can pass in just the endpoint (ex: "firehose.us-east-1.amazonaws.com") or a full URL, including the
* protocol (ex: "https://firehose.us-east-1.amazonaws.com"). If the protocol is not specified here, the default
* protocol from this client's {@link ClientConfiguration} will be used, which by default is HTTPS.
*
* For more information on using AWS regions with the AWS SDK for Java, and a complete list of all available
* endpoints for all AWS services, see: https://docs.aws.amazon.com/sdk-for-java/v1/developer-guide/java-dg-region-selection.html#region-selection-
* choose-endpoint
*
* This method is not threadsafe. An endpoint should be configured when the client is created and before any
* service requests are made. Changing it afterwards creates inevitable race conditions for any service requests in
* transit or retrying.
*
* @param endpoint
* The endpoint (ex: "firehose.us-east-1.amazonaws.com") or a full URL, including the protocol (ex:
* "https://firehose.us-east-1.amazonaws.com") of the region specific AWS endpoint this client will
* communicate with.
* @deprecated use {@link AwsClientBuilder#setEndpointConfiguration(AwsClientBuilder.EndpointConfiguration)} for
* example:
* {@code builder.setEndpointConfiguration(new EndpointConfiguration(endpoint, signingRegion));}
*/
@Deprecated
void setEndpoint(String endpoint);
/**
* An alternative to {@link AmazonKinesisFirehose#setEndpoint(String)}, sets the regional endpoint for this client's
* service calls. Callers can use this method to control which AWS region they want to work with.
*
* By default, all service endpoints in all regions use the https protocol. To use http instead, specify it in the
* {@link ClientConfiguration} supplied at construction.
*
* This method is not threadsafe. A region should be configured when the client is created and before any service
* requests are made. Changing it afterwards creates inevitable race conditions for any service requests in transit
* or retrying.
*
* @param region
* The region this client will communicate with. See {@link Region#getRegion(com.amazonaws.regions.Regions)}
* for accessing a given region. Must not be null and must be a region where the service is available.
*
* @see Region#getRegion(com.amazonaws.regions.Regions)
* @see Region#createClient(Class, com.amazonaws.auth.AWSCredentialsProvider, ClientConfiguration)
* @see Region#isServiceSupported(String)
* @deprecated use {@link AwsClientBuilder#setRegion(String)}
*/
@Deprecated
void setRegion(Region region);
/**
*
* Creates a Kinesis Data Firehose delivery stream.
*
*
* By default, you can create up to 50 delivery streams per Amazon Web Services Region.
*
*
* This is an asynchronous operation that immediately returns. The initial status of the delivery stream is
* CREATING. After the delivery stream is created, its status is ACTIVE and it now accepts
* data. If the delivery stream creation fails, the status transitions to CREATING_FAILED. Attempts to
* send data to a delivery stream that is not in the ACTIVE state cause an exception. To check the
* state of a delivery stream, use DescribeDeliveryStream.
*
*
* If the status of a delivery stream is CREATING_FAILED, this status doesn't change, and you can't
* invoke CreateDeliveryStream again on it. However, you can invoke the DeleteDeliveryStream
* operation to delete it.
*
*
* A Kinesis Data Firehose delivery stream can be configured to receive records directly from providers using
* PutRecord or PutRecordBatch, or it can be configured to use an existing Kinesis stream as its
* source. To specify a Kinesis data stream as input, set the DeliveryStreamType parameter to
* KinesisStreamAsSource, and provide the Kinesis stream Amazon Resource Name (ARN) and role ARN in the
* KinesisStreamSourceConfiguration parameter.
*
*
* To create a delivery stream with server-side encryption (SSE) enabled, include
* DeliveryStreamEncryptionConfigurationInput in your request. This is optional. You can also invoke
* StartDeliveryStreamEncryption to turn on SSE for an existing delivery stream that doesn't have SSE
* enabled.
*
*
* A delivery stream is configured with a single destination, such as Amazon Simple Storage Service (Amazon S3),
* Amazon Redshift, Amazon OpenSearch Service, Amazon OpenSearch Serverless, Splunk, and any custom HTTP endpoint or
* HTTP endpoints owned by or supported by third-party service providers, including Datadog, Dynatrace,
* LogicMonitor, MongoDB, New Relic, and Sumo Logic. You must specify only one of the following destination
* configuration parameters: ExtendedS3DestinationConfiguration,
* S3DestinationConfiguration, ElasticsearchDestinationConfiguration,
* RedshiftDestinationConfiguration, or SplunkDestinationConfiguration.
*
*
* When you specify S3DestinationConfiguration, you can also provide the following optional values:
* BufferingHints, EncryptionConfiguration, and CompressionFormat. By default, if no
* BufferingHints value is provided, Kinesis Data Firehose buffers data up to 5 MB or for 5 minutes,
* whichever condition is satisfied first. BufferingHints is a hint, so there are some cases where the
* service cannot adhere to these conditions strictly. For example, record boundaries might be such that the size is
* a little over or under the configured buffering size. By default, no encryption is performed. We strongly
* recommend that you enable encryption to ensure secure data storage in Amazon S3.
*
*
* A few notes about Amazon Redshift as a destination:
*
*
* -
*
* An Amazon Redshift destination requires an S3 bucket as intermediate location. Kinesis Data Firehose first
* delivers data to Amazon S3 and then uses COPY syntax to load data into an Amazon Redshift table.
* This is specified in the RedshiftDestinationConfiguration.S3Configuration parameter.
*
*
* -
*
* The compression formats SNAPPY or ZIP cannot be specified in
* RedshiftDestinationConfiguration.S3Configuration because the Amazon Redshift COPY
* operation that reads from the S3 bucket doesn't support these compression formats.
*
*
* -
*
* We strongly recommend that you use the user name and password you provide exclusively with Kinesis Data Firehose,
* and that the permissions for the account are restricted for Amazon Redshift INSERT permissions.
*
*
*
*
* Kinesis Data Firehose assumes the IAM role that is configured as part of the destination. The role should allow
* the Kinesis Data Firehose principal to assume the role, and the role should have permissions that allow the
* service to deliver the data. For more information, see Grant Kinesis Data
* Firehose Access to an Amazon S3 Destination in the Amazon Kinesis Data Firehose Developer Guide.
*
*
* @param createDeliveryStreamRequest
* @return Result of the CreateDeliveryStream operation returned by the service.
* @throws InvalidArgumentException
* The specified input parameter has a value that is not valid.
* @throws LimitExceededException
* You have already reached the limit for a requested resource.
* @throws ResourceInUseException
* The resource is already in use and not available for this operation.
* @throws InvalidKMSResourceException
* Kinesis Data Firehose throws this exception when an attempt to put records or to start or stop delivery
* stream encryption fails. This happens when the KMS service throws one of the following exception types:
* AccessDeniedException, InvalidStateException, DisabledException,
* or NotFoundException.
* @sample AmazonKinesisFirehose.CreateDeliveryStream
* @see AWS
* API Documentation
*/
CreateDeliveryStreamResult createDeliveryStream(CreateDeliveryStreamRequest createDeliveryStreamRequest);
/**
*
* Deletes a delivery stream and its data.
*
*
* To check the state of a delivery stream, use DescribeDeliveryStream. You can delete a delivery stream only
* if it is in one of the following states: ACTIVE, DELETING, CREATING_FAILED
* , or DELETING_FAILED. You can't delete a delivery stream that is in the CREATING state.
* While the deletion request is in process, the delivery stream is in the DELETING state.
*
*
* While the delivery stream is in the DELETING state, the service might continue to accept records,
* but it doesn't make any guarantees with respect to delivering the data. Therefore, as a best practice, first stop
* any applications that are sending records before you delete a delivery stream.
*
*
* @param deleteDeliveryStreamRequest
* @return Result of the DeleteDeliveryStream operation returned by the service.
* @throws ResourceInUseException
* The resource is already in use and not available for this operation.
* @throws ResourceNotFoundException
* The specified resource could not be found.
* @sample AmazonKinesisFirehose.DeleteDeliveryStream
* @see AWS
* API Documentation
*/
DeleteDeliveryStreamResult deleteDeliveryStream(DeleteDeliveryStreamRequest deleteDeliveryStreamRequest);
/**
*
* Describes the specified delivery stream and its status. For example, after your delivery stream is created, call
* DescribeDeliveryStream to see whether the delivery stream is ACTIVE and therefore ready
* for data to be sent to it.
*
*
* If the status of a delivery stream is CREATING_FAILED, this status doesn't change, and you can't
* invoke CreateDeliveryStream again on it. However, you can invoke the DeleteDeliveryStream operation
* to delete it. If the status is DELETING_FAILED, you can force deletion by invoking
* DeleteDeliveryStream again but with DeleteDeliveryStreamInput$AllowForceDelete set to true.
*
*
* @param describeDeliveryStreamRequest
* @return Result of the DescribeDeliveryStream operation returned by the service.
* @throws ResourceNotFoundException
* The specified resource could not be found.
* @sample AmazonKinesisFirehose.DescribeDeliveryStream
* @see AWS API Documentation
*/
DescribeDeliveryStreamResult describeDeliveryStream(DescribeDeliveryStreamRequest describeDeliveryStreamRequest);
/**
*
* Lists your delivery streams in alphabetical order of their names.
*
*
* The number of delivery streams might be too large to return using a single call to
* ListDeliveryStreams. You can limit the number of delivery streams returned, using the
* Limit parameter. To determine whether there are more delivery streams to list, check the value of
* HasMoreDeliveryStreams in the output. If there are more delivery streams to list, you can request
* them by calling this operation again and setting the ExclusiveStartDeliveryStreamName parameter to
* the name of the last delivery stream returned in the last call.
*
*
* @param listDeliveryStreamsRequest
* @return Result of the ListDeliveryStreams operation returned by the service.
* @sample AmazonKinesisFirehose.ListDeliveryStreams
* @see AWS
* API Documentation
*/
ListDeliveryStreamsResult listDeliveryStreams(ListDeliveryStreamsRequest listDeliveryStreamsRequest);
/**
*
* Lists the tags for the specified delivery stream. This operation has a limit of five transactions per second per
* account.
*
*
* @param listTagsForDeliveryStreamRequest
* @return Result of the ListTagsForDeliveryStream operation returned by the service.
* @throws ResourceNotFoundException
* The specified resource could not be found.
* @throws InvalidArgumentException
* The specified input parameter has a value that is not valid.
* @throws LimitExceededException
* You have already reached the limit for a requested resource.
* @sample AmazonKinesisFirehose.ListTagsForDeliveryStream
* @see AWS API Documentation
*/
ListTagsForDeliveryStreamResult listTagsForDeliveryStream(ListTagsForDeliveryStreamRequest listTagsForDeliveryStreamRequest);
/**
*
* Writes a single data record into an Amazon Kinesis Data Firehose delivery stream. To write multiple data records
* into a delivery stream, use PutRecordBatch. Applications using these operations are referred to as
* producers.
*
*
* By default, each delivery stream can take in up to 2,000 transactions per second, 5,000 records per second, or 5
* MB per second. If you use PutRecord and PutRecordBatch, the limits are an aggregate across these
* two operations for each delivery stream. For more information about limits and how to request an increase, see Amazon Kinesis Data Firehose Limits.
*
*
* Kinesis Data Firehose accumulates and publishes a particular metric for a customer account in one minute
* intervals. It is possible that the bursts of incoming bytes/records ingested to a delivery stream last only for a
* few seconds. Due to this, the actual spikes in the traffic might not be fully visible in the customer's 1 minute
* CloudWatch metrics.
*
*
* You must specify the name of the delivery stream and the data record when using PutRecord. The data record
* consists of a data blob that can be up to 1,000 KiB in size, and any kind of data. For example, it can be a
* segment from a log file, geographic location data, website clickstream data, and so on.
*
*
* Kinesis Data Firehose buffers records before delivering them to the destination. To disambiguate the data blobs
* at the destination, a common solution is to use delimiters in the data, such as a newline (\n) or
* some other character unique within the data. This allows the consumer application to parse individual data items
* when reading the data from the destination.
*
*
* The PutRecord operation returns a RecordId, which is a unique string assigned to each
* record. Producer applications can use this ID for purposes such as auditability and investigation.
*
*
* If the PutRecord operation throws a ServiceUnavailableException, the API is
* automatically reinvoked (retried) 3 times. If the exception persists, it is possible that the throughput limits
* have been exceeded for the delivery stream.
*
*
* Re-invoking the Put API operations (for example, PutRecord and PutRecordBatch) can result in data duplicates. For
* larger data assets, allow for a longer time out before retrying Put API operations.
*
*
* Data records sent to Kinesis Data Firehose are stored for 24 hours from the time they are added to a delivery
* stream as it tries to send the records to the destination. If the destination is unreachable for more than 24
* hours, the data is no longer available.
*
*
*
* Don't concatenate two or more base64 strings to form the data fields of your records. Instead, concatenate the
* raw data, then perform base64 encoding.
*
*
*
* @param putRecordRequest
* @return Result of the PutRecord operation returned by the service.
* @throws ResourceNotFoundException
* The specified resource could not be found.
* @throws InvalidArgumentException
* The specified input parameter has a value that is not valid.
* @throws InvalidKMSResourceException
* Kinesis Data Firehose throws this exception when an attempt to put records or to start or stop delivery
* stream encryption fails. This happens when the KMS service throws one of the following exception types:
* AccessDeniedException, InvalidStateException, DisabledException,
* or NotFoundException.
* @throws InvalidSourceException
* Only requests from CloudWatch Logs are supported when CloudWatch Logs decompression is enabled.
* @throws ServiceUnavailableException
* The service is unavailable. Back off and retry the operation. If you continue to see the exception,
* throughput limits for the delivery stream may have been exceeded. For more information about limits and
* how to request an increase, see Amazon Kinesis Data Firehose
* Limits.
* @sample AmazonKinesisFirehose.PutRecord
* @see AWS API
* Documentation
*/
PutRecordResult putRecord(PutRecordRequest putRecordRequest);
/**
*
* Writes multiple data records into a delivery stream in a single call, which can achieve higher throughput per
* producer than when writing single records. To write single data records into a delivery stream, use
* PutRecord. Applications using these operations are referred to as producers.
*
*
* Kinesis Data Firehose accumulates and publishes a particular metric for a customer account in one minute
* intervals. It is possible that the bursts of incoming bytes/records ingested to a delivery stream last only for a
* few seconds. Due to this, the actual spikes in the traffic might not be fully visible in the customer's 1 minute
* CloudWatch metrics.
*
*
* For information about service quota, see Amazon Kinesis Data Firehose Quota.
*
*
* Each PutRecordBatch request supports up to 500 records. Each record in the request can be as large as
* 1,000 KB (before base64 encoding), up to a limit of 4 MB for the entire request. These limits cannot be changed.
*
*
* You must specify the name of the delivery stream and the data record when using PutRecord. The data record
* consists of a data blob that can be up to 1,000 KB in size, and any kind of data. For example, it could be a
* segment from a log file, geographic location data, website clickstream data, and so on.
*
*
* Kinesis Data Firehose buffers records before delivering them to the destination. To disambiguate the data blobs
* at the destination, a common solution is to use delimiters in the data, such as a newline (\n) or
* some other character unique within the data. This allows the consumer application to parse individual data items
* when reading the data from the destination.
*
*
* The PutRecordBatch response includes a count of failed records, FailedPutCount, and an array
* of responses, RequestResponses. Even if the PutRecordBatch call succeeds, the value of
* FailedPutCount may be greater than 0, indicating that there are records for which the operation
* didn't succeed. Each entry in the RequestResponses array provides additional information about the
* processed record. It directly correlates with a record in the request array using the same ordering, from the top
* to the bottom. The response array always includes the same number of records as the request array.
* RequestResponses includes both successfully and unsuccessfully processed records. Kinesis Data
* Firehose tries to process all records in each PutRecordBatch request. A single record failure does not
* stop the processing of subsequent records.
*
*
* A successfully processed record includes a RecordId value, which is unique for the record. An
* unsuccessfully processed record includes ErrorCode and ErrorMessage values.
* ErrorCode reflects the type of error, and is one of the following values:
* ServiceUnavailableException or InternalFailure. ErrorMessage provides more
* detailed information about the error.
*
*
* If there is an internal server error or a timeout, the write might have completed or it might have failed. If
* FailedPutCount is greater than 0, retry the request, resending only those records that might have
* failed processing. This minimizes the possible duplicate records and also reduces the total bytes sent (and
* corresponding charges). We recommend that you handle any duplicates at the destination.
*
*
* If PutRecordBatch throws ServiceUnavailableException, the API is automatically reinvoked
* (retried) 3 times. If the exception persists, it is possible that the throughput limits have been exceeded for
* the delivery stream.
*
*
* Re-invoking the Put API operations (for example, PutRecord and PutRecordBatch) can result in data duplicates. For
* larger data assets, allow for a longer time out before retrying Put API operations.
*
*
* Data records sent to Kinesis Data Firehose are stored for 24 hours from the time they are added to a delivery
* stream as it attempts to send the records to the destination. If the destination is unreachable for more than 24
* hours, the data is no longer available.
*
*
*
* Don't concatenate two or more base64 strings to form the data fields of your records. Instead, concatenate the
* raw data, then perform base64 encoding.
*
*
*
* @param putRecordBatchRequest
* @return Result of the PutRecordBatch operation returned by the service.
* @throws ResourceNotFoundException
* The specified resource could not be found.
* @throws InvalidArgumentException
* The specified input parameter has a value that is not valid.
* @throws InvalidKMSResourceException
* Kinesis Data Firehose throws this exception when an attempt to put records or to start or stop delivery
* stream encryption fails. This happens when the KMS service throws one of the following exception types:
* AccessDeniedException, InvalidStateException, DisabledException,
* or NotFoundException.
* @throws InvalidSourceException
* Only requests from CloudWatch Logs are supported when CloudWatch Logs decompression is enabled.
* @throws ServiceUnavailableException
* The service is unavailable. Back off and retry the operation. If you continue to see the exception,
* throughput limits for the delivery stream may have been exceeded. For more information about limits and
* how to request an increase, see Amazon Kinesis Data Firehose
* Limits.
* @sample AmazonKinesisFirehose.PutRecordBatch
* @see AWS API
* Documentation
*/
PutRecordBatchResult putRecordBatch(PutRecordBatchRequest putRecordBatchRequest);
/**
*
* Enables server-side encryption (SSE) for the delivery stream.
*
*
* This operation is asynchronous. It returns immediately. When you invoke it, Kinesis Data Firehose first sets the
* encryption status of the stream to ENABLING, and then to ENABLED. The encryption status
* of a delivery stream is the Status property in DeliveryStreamEncryptionConfiguration. If the
* operation fails, the encryption status changes to ENABLING_FAILED. You can continue to read and
* write data to your delivery stream while the encryption status is ENABLING, but the data is not
* encrypted. It can take up to 5 seconds after the encryption status changes to ENABLED before all
* records written to the delivery stream are encrypted. To find out whether a record or a batch of records was
* encrypted, check the response elements PutRecordOutput$Encrypted and
* PutRecordBatchOutput$Encrypted, respectively.
*
*
* To check the encryption status of a delivery stream, use DescribeDeliveryStream.
*
*
* Even if encryption is currently enabled for a delivery stream, you can still invoke this operation on it to
* change the ARN of the CMK or both its type and ARN. If you invoke this method to change the CMK, and the old CMK
* is of type CUSTOMER_MANAGED_CMK, Kinesis Data Firehose schedules the grant it had on the old CMK for
* retirement. If the new CMK is of type CUSTOMER_MANAGED_CMK, Kinesis Data Firehose creates a grant
* that enables it to use the new CMK to encrypt and decrypt data and to manage the grant.
*
*
* For the KMS grant creation to be successful, Kinesis Data Firehose APIs
* StartDeliveryStreamEncryption and CreateDeliveryStream should not be called with
* session credentials that are more than 6 hours old.
*
*
* If a delivery stream already has encryption enabled and then you invoke this operation to change the ARN of the
* CMK or both its type and ARN and you get ENABLING_FAILED, this only means that the attempt to change
* the CMK failed. In this case, encryption remains enabled with the old CMK.
*
*
* If the encryption status of your delivery stream is ENABLING_FAILED, you can invoke this operation
* again with a valid CMK. The CMK must be enabled and the key policy mustn't explicitly deny the permission for
* Kinesis Data Firehose to invoke KMS encrypt and decrypt operations.
*
*
* You can enable SSE for a delivery stream only if it's a delivery stream that uses DirectPut as its
* source.
*
*
* The StartDeliveryStreamEncryption and StopDeliveryStreamEncryption operations have a
* combined limit of 25 calls per delivery stream per 24 hours. For example, you reach the limit if you call
* StartDeliveryStreamEncryption 13 times and StopDeliveryStreamEncryption 12 times for
* the same delivery stream in a 24-hour period.
*
*
* @param startDeliveryStreamEncryptionRequest
* @return Result of the StartDeliveryStreamEncryption operation returned by the service.
* @throws ResourceNotFoundException
* The specified resource could not be found.
* @throws ResourceInUseException
* The resource is already in use and not available for this operation.
* @throws InvalidArgumentException
* The specified input parameter has a value that is not valid.
* @throws LimitExceededException
* You have already reached the limit for a requested resource.
* @throws InvalidKMSResourceException
* Kinesis Data Firehose throws this exception when an attempt to put records or to start or stop delivery
* stream encryption fails. This happens when the KMS service throws one of the following exception types:
* AccessDeniedException, InvalidStateException, DisabledException,
* or NotFoundException.
* @sample AmazonKinesisFirehose.StartDeliveryStreamEncryption
* @see AWS API Documentation
*/
StartDeliveryStreamEncryptionResult startDeliveryStreamEncryption(StartDeliveryStreamEncryptionRequest startDeliveryStreamEncryptionRequest);
/**
*
* Disables server-side encryption (SSE) for the delivery stream.
*
*
* This operation is asynchronous. It returns immediately. When you invoke it, Kinesis Data Firehose first sets the
* encryption status of the stream to DISABLING, and then to DISABLED. You can continue to
* read and write data to your stream while its status is DISABLING. It can take up to 5 seconds after
* the encryption status changes to DISABLED before all records written to the delivery stream are no
* longer subject to encryption. To find out whether a record or a batch of records was encrypted, check the
* response elements PutRecordOutput$Encrypted and PutRecordBatchOutput$Encrypted, respectively.
*
*
* To check the encryption state of a delivery stream, use DescribeDeliveryStream.
*
*
* If SSE is enabled using a customer managed CMK and then you invoke StopDeliveryStreamEncryption,
* Kinesis Data Firehose schedules the related KMS grant for retirement and then retires it after it ensures that it
* is finished delivering records to the destination.
*
*
* The StartDeliveryStreamEncryption and StopDeliveryStreamEncryption operations have a
* combined limit of 25 calls per delivery stream per 24 hours. For example, you reach the limit if you call
* StartDeliveryStreamEncryption 13 times and StopDeliveryStreamEncryption 12 times for
* the same delivery stream in a 24-hour period.
*
*
* @param stopDeliveryStreamEncryptionRequest
* @return Result of the StopDeliveryStreamEncryption operation returned by the service.
* @throws ResourceNotFoundException
* The specified resource could not be found.
* @throws ResourceInUseException
* The resource is already in use and not available for this operation.
* @throws InvalidArgumentException
* The specified input parameter has a value that is not valid.
* @throws LimitExceededException
* You have already reached the limit for a requested resource.
* @sample AmazonKinesisFirehose.StopDeliveryStreamEncryption
* @see AWS API Documentation
*/
StopDeliveryStreamEncryptionResult stopDeliveryStreamEncryption(StopDeliveryStreamEncryptionRequest stopDeliveryStreamEncryptionRequest);
/**
*
* Adds or updates tags for the specified delivery stream. A tag is a key-value pair that you can define and assign
* to Amazon Web Services resources. If you specify a tag that already exists, the tag value is replaced with the
* value that you specify in the request. Tags are metadata. For example, you can add friendly names and
* descriptions or other types of information that can help you distinguish the delivery stream. For more
* information about tags, see Using Cost Allocation
* Tags in the Amazon Web Services Billing and Cost Management User Guide.
*
*
* Each delivery stream can have up to 50 tags.
*
*
* This operation has a limit of five transactions per second per account.
*
*
* @param tagDeliveryStreamRequest
* @return Result of the TagDeliveryStream operation returned by the service.
* @throws ResourceNotFoundException
* The specified resource could not be found.
* @throws ResourceInUseException
* The resource is already in use and not available for this operation.
* @throws InvalidArgumentException
* The specified input parameter has a value that is not valid.
* @throws LimitExceededException
* You have already reached the limit for a requested resource.
* @sample AmazonKinesisFirehose.TagDeliveryStream
* @see AWS API
* Documentation
*/
TagDeliveryStreamResult tagDeliveryStream(TagDeliveryStreamRequest tagDeliveryStreamRequest);
/**
*
* Removes tags from the specified delivery stream. Removed tags are deleted, and you can't recover them after this
* operation successfully completes.
*
*
* If you specify a tag that doesn't exist, the operation ignores it.
*
*
* This operation has a limit of five transactions per second per account.
*
*
* @param untagDeliveryStreamRequest
* @return Result of the UntagDeliveryStream operation returned by the service.
* @throws ResourceNotFoundException
* The specified resource could not be found.
* @throws ResourceInUseException
* The resource is already in use and not available for this operation.
* @throws InvalidArgumentException
* The specified input parameter has a value that is not valid.
* @throws LimitExceededException
* You have already reached the limit for a requested resource.
* @sample AmazonKinesisFirehose.UntagDeliveryStream
* @see AWS
* API Documentation
*/
UntagDeliveryStreamResult untagDeliveryStream(UntagDeliveryStreamRequest untagDeliveryStreamRequest);
/**
*
* Updates the specified destination of the specified delivery stream.
*
*
* Use this operation to change the destination type (for example, to replace the Amazon S3 destination with Amazon
* Redshift) or change the parameters associated with a destination (for example, to change the bucket name of the
* Amazon S3 destination). The update might not occur immediately. The target delivery stream remains active while
* the configurations are updated, so data writes to the delivery stream can continue during this process. The
* updated configurations are usually effective within a few minutes.
*
*
* Switching between Amazon OpenSearch Service and other services is not supported. For an Amazon OpenSearch Service
* destination, you can only update to another Amazon OpenSearch Service destination.
*
*
* If the destination type is the same, Kinesis Data Firehose merges the configuration parameters specified with the
* destination configuration that already exists on the delivery stream. If any of the parameters are not specified
* in the call, the existing values are retained. For example, in the Amazon S3 destination, if
* EncryptionConfiguration is not specified, then the existing EncryptionConfiguration is
* maintained on the destination.
*
*
* If the destination type is not the same, for example, changing the destination from Amazon S3 to Amazon Redshift,
* Kinesis Data Firehose does not merge any parameters. In this case, all parameters must be specified.
*
*
* Kinesis Data Firehose uses CurrentDeliveryStreamVersionId to avoid race conditions and conflicting
* merges. This is a required field, and the service updates the configuration only if the existing configuration
* has a version ID that matches. After the update is applied successfully, the version ID is updated, and can be
* retrieved using DescribeDeliveryStream. Use the new version ID to set
* CurrentDeliveryStreamVersionId in the next call.
*
*
* @param updateDestinationRequest
* @return Result of the UpdateDestination operation returned by the service.
* @throws InvalidArgumentException
* The specified input parameter has a value that is not valid.
* @throws ResourceInUseException
* The resource is already in use and not available for this operation.
* @throws ResourceNotFoundException
* The specified resource could not be found.
* @throws ConcurrentModificationException
* Another modification has already happened. Fetch VersionId again and use it to update the
* destination.
* @sample AmazonKinesisFirehose.UpdateDestination
* @see AWS API
* Documentation
*/
UpdateDestinationResult updateDestination(UpdateDestinationRequest updateDestinationRequest);
/**
* Shuts down this client object, releasing any resources that might be held open. This is an optional method, and
* callers are not expected to call it, but can if they want to explicitly release any open resources. Once a client
* has been shutdown, it should not be used to make any more requests.
*/
void shutdown();
/**
* Returns additional metadata for a previously executed successful request, typically used for debugging issues
* where a service isn't acting as expected. This data isn't considered part of the result data returned by an
* operation, so it's available through this separate, diagnostic interface.
*
* Response metadata is only cached for a limited period of time, so if you need to access this extra diagnostic
* information for an executed request, you should use this method to retrieve it as soon as possible after
* executing a request.
*
* @param request
* The originally executed request.
*
* @return The response metadata for the specified request, or null if none is available.
*/
ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request);
}