com.amazonaws.services.simplesystemsmanagement.AWSSimpleSystemsManagement Maven / Gradle / Ivy
Show all versions of aws-java-sdk-osgi Show documentation
/*
* Copyright 2010-2016 Amazon.com, Inc. or its affiliates. All Rights
* Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License").
* You may not use this file except in compliance with the License.
* A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
* express or implied. See the License for the specific language governing
* permissions and limitations under the License.
*/
package com.amazonaws.services.simplesystemsmanagement;
import com.amazonaws.*;
import com.amazonaws.regions.*;
import com.amazonaws.services.simplesystemsmanagement.model.*;
/**
* Interface for accessing Amazon SSM.
*
*
* This is the Amazon Simple Systems Manager (SSM) API Reference. SSM enables
* you to remotely manage the configuration of your Amazon EC2 instance using
* scripts or commands with either an on-demand solution called SSM Run
* Command or a lightweight instance configuration solution called SSM
* Config.
*
*
* This references is intended to be used with the SSM User Guide for Linux or Windows.
*
*
* Run Command
*
*
* Run Command provides an on-demand experience for executing commands. You can
* use pre-defined Amazon SSM documents to perform the actions listed later in
* this section, or you can create your own documents. With these documents, you
* can remotely configure your instances by sending commands using the
* Commands page in the Amazon EC2 console, AWS Tools for Windows PowerShell, the AWS
* CLI, or AWS SDKs.
*
*
* Run Command reports the status of the command execution for each instance
* targeted by a command. You can also audit the command execution to understand
* who executed commands, when, and what changes were made. By switching between
* different SSM documents, you can quickly configure your instances with
* different types of commands. To get started with Run Command, verify that
* your environment meets the prerequisites for remotely running commands on EC2
* instances (Linux or Windows).
*
*
*
* SSM Config
*
*
* SSM Config is a lightweight instance configuration solution. SSM Config is
* currently only available for Windows instances. With SSM Config, you can
* specify a setup configuration for your instances. SSM Config is similar to
* EC2 User Data, which is another way of running one-time scripts or applying
* settings during instance launch. SSM Config is an extension of this
* capability. Using SSM documents, you can specify which actions the system
* should perform on your instances, including which applications to install,
* which AWS Directory Service directory to join, which Microsoft PowerShell
* modules to install, etc. If an instance is missing one or more of these
* configurations, the system makes those changes. By default, the system checks
* every five minutes to see if there is a new configuration to apply as defined
* in a new SSM document. If so, the system updates the instances accordingly.
* In this way, you can remotely maintain a consistent configuration baseline on
* your instances. SSM Config is available using the AWS CLI or the AWS Tools
* for Windows PowerShell. For more information, see Managing Windows Instance Configuration.
*
*
* SSM Config and SSM Run Command include the following pre-defined documents.
*
*
* Linux
*
*
* -
*
* AWS-RunShellScript to run shell scripts
*
*
* -
*
* AWS-UpdateSSMAgent to update the Amazon SSM agent
*
*
*
*
*
* Windows
*
*
* -
*
* AWS-JoinDirectoryServiceDomain to join an AWS Directory
*
*
* -
*
* AWS-RunPowerShellScript to run PowerShell commands or scripts
*
*
* -
*
* AWS-UpdateEC2Config to update the EC2Config service
*
*
* -
*
* AWS-ConfigureWindowsUpdate to configure Windows Update settings
*
*
* -
*
* AWS-InstallApplication to install, repair, or uninstall software using
* an MSI package
*
*
* -
*
* AWS-InstallPowerShellModule to install PowerShell modules
*
*
* -
*
* AWS-ConfigureCloudWatch to configure Amazon CloudWatch Logs to monitor
* applications and systems
*
*
* -
*
* AWS-ListWindowsInventory to collect information about an EC2 instance
* running in Windows.
*
*
* -
*
* AWS-FindWindowsUpdates to scan an instance and determines which
* updates are missing.
*
*
* -
*
* AWS-InstallMissingWindowsUpdates to install missing updates on your
* EC2 instance.
*
*
* -
*
* AWS-InstallSpecificWindowsUpdates to install one or more specific
* updates.
*
*
*
*
*
* The commands or scripts specified in SSM documents run with administrative
* privilege on your instances because the Amazon SSM agent runs as root on
* Linux and the EC2Config service runs in the Local System account on Windows.
* If a user has permission to execute any of the pre-defined SSM documents (any
* document that begins with AWS-*) then that user also has administrator access
* to the instance. Delegate access to SSM and Run Command judiciously. This
* becomes extremely important if you create your own SSM documents. Amazon Web
* Services does not provide guidance about how to create secure SSM documents.
* You create SSM documents and delegate access to Run Command at your own risk.
* As a security best practice, we recommend that you assign access to "AWS-*"
* documents, especially the AWS-RunShellScript document on Linux and the
* AWS-RunPowerShellScript document on Windows, to trusted administrators only.
* You can create SSM documents for specific tasks and delegate access to
* non-administrators.
*
*
*
* For information about creating and sharing SSM documents, see the following
* topics in the SSM User Guide:
*
*
* -
*
* Creating SSM Documents and Sharing SSM Documents (Linux)
*
*
* -
*
* Creating SSM Documents and Sharing SSM Documents (Windows)
*
*
*
*/
public interface AWSSimpleSystemsManagement {
/**
* Overrides the default endpoint for this client
* ("https://ssm.us-east-1.amazonaws.com"). Callers can use this method to
* control which AWS region they want to work with.
*
* Callers can pass in just the endpoint (ex: "ssm.us-east-1.amazonaws.com")
* or a full URL, including the protocol (ex:
* "https://ssm.us-east-1.amazonaws.com"). If the protocol is not specified
* here, the default protocol from this client's {@link ClientConfiguration}
* will be used, which by default is HTTPS.
*
* For more information on using AWS regions with the AWS SDK for Java, and
* a complete list of all available endpoints for all AWS services, see: http://developer.amazonwebservices.com/connect/entry.jspa?externalID=
* 3912
*
* This method is not threadsafe. An endpoint should be configured when
* the client is created and before any service requests are made. Changing
* it afterwards creates inevitable race conditions for any service requests
* in transit or retrying.
*
* @param endpoint
* The endpoint (ex: "ssm.us-east-1.amazonaws.com") or a full URL,
* including the protocol (ex: "https://ssm.us-east-1.amazonaws.com")
* of the region specific AWS endpoint this client will communicate
* with.
*/
void setEndpoint(String endpoint);
/**
* An alternative to {@link AWSSimpleSystemsManagement#setEndpoint(String)},
* sets the regional endpoint for this client's service calls. Callers can
* use this method to control which AWS region they want to work with.
*
* By default, all service endpoints in all regions use the https protocol.
* To use http instead, specify it in the {@link ClientConfiguration}
* supplied at construction.
*
* This method is not threadsafe. A region should be configured when the
* client is created and before any service requests are made. Changing it
* afterwards creates inevitable race conditions for any service requests in
* transit or retrying.
*
* @param region
* The region this client will communicate with. See
* {@link Region#getRegion(com.amazonaws.regions.Regions)} for
* accessing a given region. Must not be null and must be a region
* where the service is available.
*
* @see Region#getRegion(com.amazonaws.regions.Regions)
* @see Region#createClient(Class,
* com.amazonaws.auth.AWSCredentialsProvider, ClientConfiguration)
* @see Region#isServiceSupported(String)
*/
void setRegion(Region region);
/**
*
* Attempts to cancel the command specified by the Command ID. There is no
* guarantee that the command will be terminated and the underlying process
* stopped.
*
*
* @param cancelCommandRequest
* @return Result of the CancelCommand operation returned by the service.
* @throws InternalServerErrorException
* An error occurred on the server side.
* @throws InvalidCommandIdException
* @throws InvalidInstanceIdException
* The instance is not in valid state. Valid states are: Running,
* Pending, Stopped, Stopping. Invalid states are: Shutting-down and
* Terminated.
* @throws DuplicateInstanceIdException
* You cannot specify an instance ID in more than one association.
* @sample AWSSimpleSystemsManagement.CancelCommand
*/
CancelCommandResult cancelCommand(CancelCommandRequest cancelCommandRequest);
/**
*
* Associates the specified SSM document with the specified instance.
*
*
* When you associate an SSM document with an instance, the configuration
* agent on the instance processes the document and configures the instance
* as specified.
*
*
* If you associate a document with an instance that already has an
* associated document, the system throws the AssociationAlreadyExists
* exception.
*
*
* @param createAssociationRequest
* @return Result of the CreateAssociation operation returned by the
* service.
* @throws AssociationAlreadyExistsException
* The specified association already exists.
* @throws AssociationLimitExceededException
* You can have at most 2,000 active associations.
* @throws InternalServerErrorException
* An error occurred on the server side.
* @throws InvalidDocumentException
* The specified document does not exist.
* @throws InvalidInstanceIdException
* The instance is not in valid state. Valid states are: Running,
* Pending, Stopped, Stopping. Invalid states are: Shutting-down and
* Terminated.
* @throws UnsupportedPlatformTypeException
* The document does not support the platform type of the given
* instance ID(s). For example, you sent an SSM document for a
* Windows instance to a Linux instance.
* @throws InvalidParametersException
* You must specify values for all required parameters in the SSM
* document. You can only supply values to parameters defined in the
* SSM document.
* @sample AWSSimpleSystemsManagement.CreateAssociation
*/
CreateAssociationResult createAssociation(
CreateAssociationRequest createAssociationRequest);
/**
*
* Associates the specified SSM document with the specified instances.
*
*
* When you associate an SSM document with an instance, the configuration
* agent on the instance processes the document and configures the instance
* as specified.
*
*
* If you associate a document with an instance that already has an
* associated document, the system throws the AssociationAlreadyExists
* exception.
*
*
* @param createAssociationBatchRequest
* @return Result of the CreateAssociationBatch operation returned by the
* service.
* @throws InternalServerErrorException
* An error occurred on the server side.
* @throws InvalidDocumentException
* The specified document does not exist.
* @throws InvalidInstanceIdException
* The instance is not in valid state. Valid states are: Running,
* Pending, Stopped, Stopping. Invalid states are: Shutting-down and
* Terminated.
* @throws InvalidParametersException
* You must specify values for all required parameters in the SSM
* document. You can only supply values to parameters defined in the
* SSM document.
* @throws DuplicateInstanceIdException
* You cannot specify an instance ID in more than one association.
* @throws AssociationLimitExceededException
* You can have at most 2,000 active associations.
* @throws UnsupportedPlatformTypeException
* The document does not support the platform type of the given
* instance ID(s). For example, you sent an SSM document for a
* Windows instance to a Linux instance.
* @sample AWSSimpleSystemsManagement.CreateAssociationBatch
*/
CreateAssociationBatchResult createAssociationBatch(
CreateAssociationBatchRequest createAssociationBatchRequest);
/**
*
* Creates an SSM document.
*
*
* After you create an SSM document, you can use CreateAssociation to
* associate it with one or more running instances.
*
*
* @param createDocumentRequest
* @return Result of the CreateDocument operation returned by the service.
* @throws DocumentAlreadyExistsException
* The specified SSM document already exists.
* @throws MaxDocumentSizeExceededException
* The size limit of an SSM document is 64 KB.
* @throws InternalServerErrorException
* An error occurred on the server side.
* @throws InvalidDocumentContentException
* The content for the SSM document is not valid.
* @throws DocumentLimitExceededException
* You can have at most 100 active SSM documents.
* @sample AWSSimpleSystemsManagement.CreateDocument
*/
CreateDocumentResult createDocument(
CreateDocumentRequest createDocumentRequest);
/**
*
* Disassociates the specified SSM document from the specified instance.
*
*
* When you disassociate an SSM document from an instance, it does not
* change the configuration of the instance. To change the configuration
* state of an instance after you disassociate a document, you must create a
* new document with the desired configuration and associate it with the
* instance.
*
*
* @param deleteAssociationRequest
* @return Result of the DeleteAssociation operation returned by the
* service.
* @throws AssociationDoesNotExistException
* The specified association does not exist.
* @throws InternalServerErrorException
* An error occurred on the server side.
* @throws InvalidDocumentException
* The specified document does not exist.
* @throws InvalidInstanceIdException
* The instance is not in valid state. Valid states are: Running,
* Pending, Stopped, Stopping. Invalid states are: Shutting-down and
* Terminated.
* @throws TooManyUpdatesException
* There are concurrent updates for a resource that supports one
* update at a time.
* @sample AWSSimpleSystemsManagement.DeleteAssociation
*/
DeleteAssociationResult deleteAssociation(
DeleteAssociationRequest deleteAssociationRequest);
/**
*
* Deletes the SSM document and all instance associations to the document.
*
*
* Before you delete the SSM document, we recommend that you use
* DeleteAssociation to disassociate all instances that are associated with
* the document.
*
*
* @param deleteDocumentRequest
* @return Result of the DeleteDocument operation returned by the service.
* @throws InternalServerErrorException
* An error occurred on the server side.
* @throws InvalidDocumentException
* The specified document does not exist.
* @throws InvalidDocumentOperationException
* You attempted to delete a document while it is still shared. You
* must stop sharing the document before you can delete it.
* @throws AssociatedInstancesException
* You must disassociate an SSM document from all instances before
* you can delete it.
* @sample AWSSimpleSystemsManagement.DeleteDocument
*/
DeleteDocumentResult deleteDocument(
DeleteDocumentRequest deleteDocumentRequest);
/**
*
* Describes the associations for the specified SSM document or instance.
*
*
* @param describeAssociationRequest
* @return Result of the DescribeAssociation operation returned by the
* service.
* @throws AssociationDoesNotExistException
* The specified association does not exist.
* @throws InternalServerErrorException
* An error occurred on the server side.
* @throws InvalidDocumentException
* The specified document does not exist.
* @throws InvalidInstanceIdException
* The instance is not in valid state. Valid states are: Running,
* Pending, Stopped, Stopping. Invalid states are: Shutting-down and
* Terminated.
* @sample AWSSimpleSystemsManagement.DescribeAssociation
*/
DescribeAssociationResult describeAssociation(
DescribeAssociationRequest describeAssociationRequest);
/**
*
* Describes the specified SSM document.
*
*
* @param describeDocumentRequest
* @return Result of the DescribeDocument operation returned by the service.
* @throws InternalServerErrorException
* An error occurred on the server side.
* @throws InvalidDocumentException
* The specified document does not exist.
* @sample AWSSimpleSystemsManagement.DescribeDocument
*/
DescribeDocumentResult describeDocument(
DescribeDocumentRequest describeDocumentRequest);
/**
*
* Describes the permissions for an SSM document. If you created the
* document, you are the owner. If a document is shared, it can either be
* shared privately (by specifying a user’s AWS account ID) or publicly
* (All).
*
*
* @param describeDocumentPermissionRequest
* @return Result of the DescribeDocumentPermission operation returned by
* the service.
* @throws InternalServerErrorException
* An error occurred on the server side.
* @throws InvalidDocumentException
* The specified document does not exist.
* @throws InvalidPermissionTypeException
* The permission type is not supported. Share is the only
* supported permission type.
* @sample AWSSimpleSystemsManagement.DescribeDocumentPermission
*/
DescribeDocumentPermissionResult describeDocumentPermission(
DescribeDocumentPermissionRequest describeDocumentPermissionRequest);
/**
*
* Describes one or more of your instances. You can use this to get
* information about instances like the operating system platform, the SSM
* agent version, status etc. If you specify one or more instance IDs, it
* returns information for those instances. If you do not specify instance
* IDs, it returns information for all your instances. If you specify an
* instance ID that is not valid or an instance that you do not own, you
* receive an error.
*
*
* @param describeInstanceInformationRequest
* @return Result of the DescribeInstanceInformation operation returned by
* the service.
* @throws InternalServerErrorException
* An error occurred on the server side.
* @throws InvalidInstanceIdException
* The instance is not in valid state. Valid states are: Running,
* Pending, Stopped, Stopping. Invalid states are: Shutting-down and
* Terminated.
* @throws InvalidNextTokenException
* The specified token is not valid.
* @throws InvalidInstanceInformationFilterValueException
* The specified filter value is not valid.
* @throws InvalidFilterKeyException
* The specified key is not valid.
* @sample AWSSimpleSystemsManagement.DescribeInstanceInformation
*/
DescribeInstanceInformationResult describeInstanceInformation(
DescribeInstanceInformationRequest describeInstanceInformationRequest);
/**
*
* Gets the contents of the specified SSM document.
*
*
* @param getDocumentRequest
* @return Result of the GetDocument operation returned by the service.
* @throws InternalServerErrorException
* An error occurred on the server side.
* @throws InvalidDocumentException
* The specified document does not exist.
* @sample AWSSimpleSystemsManagement.GetDocument
*/
GetDocumentResult getDocument(GetDocumentRequest getDocumentRequest);
/**
*
* Lists the associations for the specified SSM document or instance.
*
*
* @param listAssociationsRequest
* @return Result of the ListAssociations operation returned by the service.
* @throws InternalServerErrorException
* An error occurred on the server side.
* @throws InvalidNextTokenException
* The specified token is not valid.
* @sample AWSSimpleSystemsManagement.ListAssociations
*/
ListAssociationsResult listAssociations(
ListAssociationsRequest listAssociationsRequest);
/**
*
* An invocation is copy of a command sent to a specific instance. A command
* can apply to one or more instances. A command invocation applies to one
* instance. For example, if a user executes SendCommand against three
* instances, then a command invocation is created for each requested
* instance ID. ListCommandInvocations provide status about command
* execution.
*
*
* @param listCommandInvocationsRequest
* @return Result of the ListCommandInvocations operation returned by the
* service.
* @throws InternalServerErrorException
* An error occurred on the server side.
* @throws InvalidCommandIdException
* @throws InvalidInstanceIdException
* The instance is not in valid state. Valid states are: Running,
* Pending, Stopped, Stopping. Invalid states are: Shutting-down and
* Terminated.
* @throws InvalidFilterKeyException
* The specified key is not valid.
* @throws InvalidNextTokenException
* The specified token is not valid.
* @sample AWSSimpleSystemsManagement.ListCommandInvocations
*/
ListCommandInvocationsResult listCommandInvocations(
ListCommandInvocationsRequest listCommandInvocationsRequest);
/**
*
* Lists the commands requested by users of the AWS account.
*
*
* @param listCommandsRequest
* @return Result of the ListCommands operation returned by the service.
* @throws InternalServerErrorException
* An error occurred on the server side.
* @throws InvalidCommandIdException
* @throws InvalidInstanceIdException
* The instance is not in valid state. Valid states are: Running,
* Pending, Stopped, Stopping. Invalid states are: Shutting-down and
* Terminated.
* @throws InvalidFilterKeyException
* The specified key is not valid.
* @throws InvalidNextTokenException
* The specified token is not valid.
* @sample AWSSimpleSystemsManagement.ListCommands
*/
ListCommandsResult listCommands(ListCommandsRequest listCommandsRequest);
/**
*
* Describes one or more of your SSM documents.
*
*
* @param listDocumentsRequest
* @return Result of the ListDocuments operation returned by the service.
* @throws InternalServerErrorException
* An error occurred on the server side.
* @throws InvalidNextTokenException
* The specified token is not valid.
* @throws InvalidFilterKeyException
* The specified key is not valid.
* @sample AWSSimpleSystemsManagement.ListDocuments
*/
ListDocumentsResult listDocuments(ListDocumentsRequest listDocumentsRequest);
/**
* Simplified method form for invoking the ListDocuments operation.
*
* @see #listDocuments(ListDocumentsRequest)
*/
ListDocumentsResult listDocuments();
/**
*
* Share a document publicly or privately. If you share a document
* privately, you must specify the AWS user account IDs for those people who
* can use the document. If you share a document publicly, you must specify
* All as the account ID.
*
*
* @param modifyDocumentPermissionRequest
* @return Result of the ModifyDocumentPermission operation returned by the
* service.
* @throws InternalServerErrorException
* An error occurred on the server side.
* @throws InvalidDocumentException
* The specified document does not exist.
* @throws InvalidPermissionTypeException
* The permission type is not supported. Share is the only
* supported permission type.
* @throws DocumentPermissionLimitException
* The document cannot be shared with more AWS user accounts. You
* can share a document with a maximum of 20 accounts. You can
* publicly share up to five documents. If you need to increase this
* limit, contact AWS Support.
* @throws DocumentLimitExceededException
* You can have at most 100 active SSM documents.
* @sample AWSSimpleSystemsManagement.ModifyDocumentPermission
*/
ModifyDocumentPermissionResult modifyDocumentPermission(
ModifyDocumentPermissionRequest modifyDocumentPermissionRequest);
/**
*
* Executes commands on one or more remote instances.
*
*
* @param sendCommandRequest
* @return Result of the SendCommand operation returned by the service.
* @throws DuplicateInstanceIdException
* You cannot specify an instance ID in more than one association.
* @throws InternalServerErrorException
* An error occurred on the server side.
* @throws InvalidInstanceIdException
* The instance is not in valid state. Valid states are: Running,
* Pending, Stopped, Stopping. Invalid states are: Shutting-down and
* Terminated.
* @throws InvalidDocumentException
* The specified document does not exist.
* @throws InvalidOutputFolderException
* The S3 bucket does not exist.
* @throws InvalidParametersException
* You must specify values for all required parameters in the SSM
* document. You can only supply values to parameters defined in the
* SSM document.
* @throws UnsupportedPlatformTypeException
* The document does not support the platform type of the given
* instance ID(s). For example, you sent an SSM document for a
* Windows instance to a Linux instance.
* @throws MaxDocumentSizeExceededException
* The size limit of an SSM document is 64 KB.
* @sample AWSSimpleSystemsManagement.SendCommand
*/
SendCommandResult sendCommand(SendCommandRequest sendCommandRequest);
/**
*
* Updates the status of the SSM document associated with the specified
* instance.
*
*
* @param updateAssociationStatusRequest
* @return Result of the UpdateAssociationStatus operation returned by the
* service.
* @throws InternalServerErrorException
* An error occurred on the server side.
* @throws InvalidInstanceIdException
* The instance is not in valid state. Valid states are: Running,
* Pending, Stopped, Stopping. Invalid states are: Shutting-down and
* Terminated.
* @throws InvalidDocumentException
* The specified document does not exist.
* @throws AssociationDoesNotExistException
* The specified association does not exist.
* @throws StatusUnchangedException
* The updated status is the same as the current status.
* @throws TooManyUpdatesException
* There are concurrent updates for a resource that supports one
* update at a time.
* @sample AWSSimpleSystemsManagement.UpdateAssociationStatus
*/
UpdateAssociationStatusResult updateAssociationStatus(
UpdateAssociationStatusRequest updateAssociationStatusRequest);
/**
* Shuts down this client object, releasing any resources that might be held
* open. This is an optional method, and callers are not expected to call
* it, but can if they want to explicitly release any open resources. Once a
* client has been shutdown, it should not be used to make any more
* requests.
*/
void shutdown();
/**
* Returns additional metadata for a previously executed successful request,
* typically used for debugging issues where a service isn't acting as
* expected. This data isn't considered part of the result data returned by
* an operation, so it's available through this separate, diagnostic
* interface.
*
* Response metadata is only cached for a limited period of time, so if you
* need to access this extra diagnostic information for an executed request,
* you should use this method to retrieve it as soon as possible after
* executing a request.
*
* @param request
* The originally executed request.
*
* @return The response metadata for the specified request, or null if none
* is available.
*/
ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request);
}