com.amazonaws.services.simpleemail.model.SendRawEmailRequest Maven / Gradle / Ivy
Show all versions of aws-java-sdk-ses Show documentation
/*
* Copyright 2011-2016 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with
* the License. A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions
* and limitations under the License.
*/
package com.amazonaws.services.simpleemail.model;
import java.io.Serializable;
import com.amazonaws.AmazonWebServiceRequest;
/**
*
* Represents a request to send a single raw email using Amazon SES. For more information, see the Amazon SES Developer Guide.
*
*/
public class SendRawEmailRequest extends com.amazonaws.AmazonWebServiceRequest implements Serializable, Cloneable {
/**
*
* The identity's email address. If you do not provide a value for this parameter, you must specify a "From" address
* in the raw text of the message. (You can also specify both.)
*
*
* By default, the string must be 7-bit ASCII. If the text must contain any other characters, then you must use MIME
* encoded-word syntax (RFC 2047) instead of a literal string. MIME encoded-word syntax uses the following form:
* =?charset?encoding?encoded-text?=. For more information, see RFC 2047.
*
*
*
* If you specify the Source parameter and have feedback forwarding enabled, then bounces and
* complaints will be sent to this email address. This takes precedence over any Return-Path header that you
* might include in the raw text of the message.
*
*
*/
private String source;
/**
*
* A list of destinations for the message, consisting of To:, CC:, and BCC: addresses.
*
*/
private com.amazonaws.internal.SdkInternalList destinations;
/**
*
* The raw text of the message. The client is responsible for ensuring the following:
*
*
* -
*
* Message must contain a header and a body, separated by a blank line.
*
*
* -
*
* All required header fields must be present.
*
*
* -
*
* Each part of a multipart MIME message must be formatted properly.
*
*
* -
*
* MIME content types must be among those supported by Amazon SES. For more information, go to the Amazon SES Developer Guide.
*
*
* -
*
* Must be base64-encoded.
*
*
*
*/
private RawMessage rawMessage;
/**
*
* This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the
* sending authorization policy that permits you to specify a particular "From" address in the header of the raw
* email.
*
*
* Instead of using this parameter, you can use the X-header X-SES-FROM-ARN in the raw message of the
* email. If you use both the FromArn parameter and the corresponding X-header, Amazon SES uses the
* value of the FromArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in this guide,
* or see the Amazon SES Developer Guide.
*
*
*/
private String fromArn;
/**
*
* This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the
* sending authorization policy that permits you to send for the email address specified in the Source
* parameter.
*
*
* For example, if the owner of example.com (which has ARN
* arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you
* to send from [email protected], then you would specify the SourceArn to be
* arn:aws:ses:us-east-1:123456789012:identity/example.com, and the Source to be
* [email protected].
*
*
* Instead of using this parameter, you can use the X-header X-SES-SOURCE-ARN in the raw message of the
* email. If you use both the SourceArn parameter and the corresponding X-header, Amazon SES uses the
* value of the SourceArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in this guide,
* or see the Amazon SES Developer Guide.
*
*
*/
private String sourceArn;
/**
*
* This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the
* sending authorization policy that permits you to use the email address specified in the ReturnPath
* parameter.
*
*
* For example, if the owner of example.com (which has ARN
* arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you
* to use [email protected], then you would specify the ReturnPathArn to be
* arn:aws:ses:us-east-1:123456789012:identity/example.com, and the ReturnPath to be
* [email protected].
*
*
* Instead of using this parameter, you can use the X-header X-SES-RETURN-PATH-ARN in the raw message
* of the email. If you use both the ReturnPathArn parameter and the corresponding X-header, Amazon SES
* uses the value of the ReturnPathArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in this guide,
* or see the Amazon SES Developer Guide.
*
*
*/
private String returnPathArn;
/**
* Default constructor for SendRawEmailRequest object. Callers should use the setter or fluent setter (with...)
* methods to initialize the object after creating it.
*/
public SendRawEmailRequest() {
}
/**
* Constructs a new SendRawEmailRequest object. Callers should use the setter or fluent setter (with...) methods to
* initialize any additional object members.
*
* @param rawMessage
* The raw text of the message. The client is responsible for ensuring the following:
*
* -
*
* Message must contain a header and a body, separated by a blank line.
*
*
* -
*
* All required header fields must be present.
*
*
* -
*
* Each part of a multipart MIME message must be formatted properly.
*
*
* -
*
* MIME content types must be among those supported by Amazon SES. For more information, go to the Amazon SES Developer
* Guide.
*
*
* -
*
* Must be base64-encoded.
*
*
*/
public SendRawEmailRequest(RawMessage rawMessage) {
setRawMessage(rawMessage);
}
/**
*
* The identity's email address. If you do not provide a value for this parameter, you must specify a "From" address
* in the raw text of the message. (You can also specify both.)
*
*
* By default, the string must be 7-bit ASCII. If the text must contain any other characters, then you must use MIME
* encoded-word syntax (RFC 2047) instead of a literal string. MIME encoded-word syntax uses the following form:
* =?charset?encoding?encoded-text?=. For more information, see RFC 2047.
*
*
*
* If you specify the Source parameter and have feedback forwarding enabled, then bounces and
* complaints will be sent to this email address. This takes precedence over any Return-Path header that you
* might include in the raw text of the message.
*
*
*
* @param source
* The identity's email address. If you do not provide a value for this parameter, you must specify a "From"
* address in the raw text of the message. (You can also specify both.)
*
* By default, the string must be 7-bit ASCII. If the text must contain any other characters, then you must
* use MIME encoded-word syntax (RFC 2047) instead of a literal string. MIME encoded-word syntax uses the
* following form: =?charset?encoding?encoded-text?=. For more information, see RFC 2047.
*
*
*
* If you specify the Source parameter and have feedback forwarding enabled, then bounces and
* complaints will be sent to this email address. This takes precedence over any Return-Path header
* that you might include in the raw text of the message.
*
*/
public void setSource(String source) {
this.source = source;
}
/**
*
* The identity's email address. If you do not provide a value for this parameter, you must specify a "From" address
* in the raw text of the message. (You can also specify both.)
*
*
* By default, the string must be 7-bit ASCII. If the text must contain any other characters, then you must use MIME
* encoded-word syntax (RFC 2047) instead of a literal string. MIME encoded-word syntax uses the following form:
* =?charset?encoding?encoded-text?=. For more information, see RFC 2047.
*
*
*
* If you specify the Source parameter and have feedback forwarding enabled, then bounces and
* complaints will be sent to this email address. This takes precedence over any Return-Path header that you
* might include in the raw text of the message.
*
*
*
* @return The identity's email address. If you do not provide a value for this parameter, you must specify a "From"
* address in the raw text of the message. (You can also specify both.)
*
* By default, the string must be 7-bit ASCII. If the text must contain any other characters, then you must
* use MIME encoded-word syntax (RFC 2047) instead of a literal string. MIME encoded-word syntax uses the
* following form: =?charset?encoding?encoded-text?=. For more information, see RFC 2047.
*
*
*
* If you specify the Source parameter and have feedback forwarding enabled, then bounces and
* complaints will be sent to this email address. This takes precedence over any Return-Path header
* that you might include in the raw text of the message.
*
*/
public String getSource() {
return this.source;
}
/**
*
* The identity's email address. If you do not provide a value for this parameter, you must specify a "From" address
* in the raw text of the message. (You can also specify both.)
*
*
* By default, the string must be 7-bit ASCII. If the text must contain any other characters, then you must use MIME
* encoded-word syntax (RFC 2047) instead of a literal string. MIME encoded-word syntax uses the following form:
* =?charset?encoding?encoded-text?=. For more information, see RFC 2047.
*
*
*
* If you specify the Source parameter and have feedback forwarding enabled, then bounces and
* complaints will be sent to this email address. This takes precedence over any Return-Path header that you
* might include in the raw text of the message.
*
*
*
* @param source
* The identity's email address. If you do not provide a value for this parameter, you must specify a "From"
* address in the raw text of the message. (You can also specify both.)
*
* By default, the string must be 7-bit ASCII. If the text must contain any other characters, then you must
* use MIME encoded-word syntax (RFC 2047) instead of a literal string. MIME encoded-word syntax uses the
* following form: =?charset?encoding?encoded-text?=. For more information, see RFC 2047.
*
*
*
* If you specify the Source parameter and have feedback forwarding enabled, then bounces and
* complaints will be sent to this email address. This takes precedence over any Return-Path header
* that you might include in the raw text of the message.
*
* @return Returns a reference to this object so that method calls can be chained together.
*/
public SendRawEmailRequest withSource(String source) {
setSource(source);
return this;
}
/**
*
* A list of destinations for the message, consisting of To:, CC:, and BCC: addresses.
*
*
* @return A list of destinations for the message, consisting of To:, CC:, and BCC: addresses.
*/
public java.util.List getDestinations() {
if (destinations == null) {
destinations = new com.amazonaws.internal.SdkInternalList();
}
return destinations;
}
/**
*
* A list of destinations for the message, consisting of To:, CC:, and BCC: addresses.
*
*
* @param destinations
* A list of destinations for the message, consisting of To:, CC:, and BCC: addresses.
*/
public void setDestinations(java.util.Collection destinations) {
if (destinations == null) {
this.destinations = null;
return;
}
this.destinations = new com.amazonaws.internal.SdkInternalList(destinations);
}
/**
*
* A list of destinations for the message, consisting of To:, CC:, and BCC: addresses.
*
*
* NOTE: This method appends the values to the existing list (if any). Use
* {@link #setDestinations(java.util.Collection)} or {@link #withDestinations(java.util.Collection)} if you want to
* override the existing values.
*
*
* @param destinations
* A list of destinations for the message, consisting of To:, CC:, and BCC: addresses.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public SendRawEmailRequest withDestinations(String... destinations) {
if (this.destinations == null) {
setDestinations(new com.amazonaws.internal.SdkInternalList(destinations.length));
}
for (String ele : destinations) {
this.destinations.add(ele);
}
return this;
}
/**
*
* A list of destinations for the message, consisting of To:, CC:, and BCC: addresses.
*
*
* @param destinations
* A list of destinations for the message, consisting of To:, CC:, and BCC: addresses.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public SendRawEmailRequest withDestinations(java.util.Collection destinations) {
setDestinations(destinations);
return this;
}
/**
*
* The raw text of the message. The client is responsible for ensuring the following:
*
*
* -
*
* Message must contain a header and a body, separated by a blank line.
*
*
* -
*
* All required header fields must be present.
*
*
* -
*
* Each part of a multipart MIME message must be formatted properly.
*
*
* -
*
* MIME content types must be among those supported by Amazon SES. For more information, go to the Amazon SES Developer Guide.
*
*
* -
*
* Must be base64-encoded.
*
*
*
*
* @param rawMessage
* The raw text of the message. The client is responsible for ensuring the following:
*
* -
*
* Message must contain a header and a body, separated by a blank line.
*
*
* -
*
* All required header fields must be present.
*
*
* -
*
* Each part of a multipart MIME message must be formatted properly.
*
*
* -
*
* MIME content types must be among those supported by Amazon SES. For more information, go to the Amazon SES Developer
* Guide.
*
*
* -
*
* Must be base64-encoded.
*
*
*/
public void setRawMessage(RawMessage rawMessage) {
this.rawMessage = rawMessage;
}
/**
*
* The raw text of the message. The client is responsible for ensuring the following:
*
*
* -
*
* Message must contain a header and a body, separated by a blank line.
*
*
* -
*
* All required header fields must be present.
*
*
* -
*
* Each part of a multipart MIME message must be formatted properly.
*
*
* -
*
* MIME content types must be among those supported by Amazon SES. For more information, go to the Amazon SES Developer Guide.
*
*
* -
*
* Must be base64-encoded.
*
*
*
*
* @return The raw text of the message. The client is responsible for ensuring the following:
*
* -
*
* Message must contain a header and a body, separated by a blank line.
*
*
* -
*
* All required header fields must be present.
*
*
* -
*
* Each part of a multipart MIME message must be formatted properly.
*
*
* -
*
* MIME content types must be among those supported by Amazon SES. For more information, go to the Amazon SES Developer
* Guide.
*
*
* -
*
* Must be base64-encoded.
*
*
*/
public RawMessage getRawMessage() {
return this.rawMessage;
}
/**
*
* The raw text of the message. The client is responsible for ensuring the following:
*
*
* -
*
* Message must contain a header and a body, separated by a blank line.
*
*
* -
*
* All required header fields must be present.
*
*
* -
*
* Each part of a multipart MIME message must be formatted properly.
*
*
* -
*
* MIME content types must be among those supported by Amazon SES. For more information, go to the Amazon SES Developer Guide.
*
*
* -
*
* Must be base64-encoded.
*
*
*
*
* @param rawMessage
* The raw text of the message. The client is responsible for ensuring the following:
*
* -
*
* Message must contain a header and a body, separated by a blank line.
*
*
* -
*
* All required header fields must be present.
*
*
* -
*
* Each part of a multipart MIME message must be formatted properly.
*
*
* -
*
* MIME content types must be among those supported by Amazon SES. For more information, go to the Amazon SES Developer
* Guide.
*
*
* -
*
* Must be base64-encoded.
*
*
* @return Returns a reference to this object so that method calls can be chained together.
*/
public SendRawEmailRequest withRawMessage(RawMessage rawMessage) {
setRawMessage(rawMessage);
return this;
}
/**
*
* This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the
* sending authorization policy that permits you to specify a particular "From" address in the header of the raw
* email.
*
*
* Instead of using this parameter, you can use the X-header X-SES-FROM-ARN in the raw message of the
* email. If you use both the FromArn parameter and the corresponding X-header, Amazon SES uses the
* value of the FromArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in this guide,
* or see the Amazon SES Developer Guide.
*
*
*
* @param fromArn
* This parameter is used only for sending authorization. It is the ARN of the identity that is associated
* with the sending authorization policy that permits you to specify a particular "From" address in the
* header of the raw email.
*
* Instead of using this parameter, you can use the X-header X-SES-FROM-ARN in the raw message
* of the email. If you use both the FromArn parameter and the corresponding X-header, Amazon
* SES uses the value of the FromArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in this
* guide, or see the Amazon SES Developer Guide.
*
*/
public void setFromArn(String fromArn) {
this.fromArn = fromArn;
}
/**
*
* This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the
* sending authorization policy that permits you to specify a particular "From" address in the header of the raw
* email.
*
*
* Instead of using this parameter, you can use the X-header X-SES-FROM-ARN in the raw message of the
* email. If you use both the FromArn parameter and the corresponding X-header, Amazon SES uses the
* value of the FromArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in this guide,
* or see the Amazon SES Developer Guide.
*
*
*
* @return This parameter is used only for sending authorization. It is the ARN of the identity that is associated
* with the sending authorization policy that permits you to specify a particular "From" address in the
* header of the raw email.
*
* Instead of using this parameter, you can use the X-header X-SES-FROM-ARN in the raw message
* of the email. If you use both the FromArn parameter and the corresponding X-header, Amazon
* SES uses the value of the FromArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in
* this guide, or see the Amazon SES Developer Guide.
*
*/
public String getFromArn() {
return this.fromArn;
}
/**
*
* This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the
* sending authorization policy that permits you to specify a particular "From" address in the header of the raw
* email.
*
*
* Instead of using this parameter, you can use the X-header X-SES-FROM-ARN in the raw message of the
* email. If you use both the FromArn parameter and the corresponding X-header, Amazon SES uses the
* value of the FromArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in this guide,
* or see the Amazon SES Developer Guide.
*
*
*
* @param fromArn
* This parameter is used only for sending authorization. It is the ARN of the identity that is associated
* with the sending authorization policy that permits you to specify a particular "From" address in the
* header of the raw email.
*
* Instead of using this parameter, you can use the X-header X-SES-FROM-ARN in the raw message
* of the email. If you use both the FromArn parameter and the corresponding X-header, Amazon
* SES uses the value of the FromArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in this
* guide, or see the Amazon SES Developer Guide.
*
* @return Returns a reference to this object so that method calls can be chained together.
*/
public SendRawEmailRequest withFromArn(String fromArn) {
setFromArn(fromArn);
return this;
}
/**
*
* This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the
* sending authorization policy that permits you to send for the email address specified in the Source
* parameter.
*
*
* For example, if the owner of example.com (which has ARN
* arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you
* to send from [email protected], then you would specify the SourceArn to be
* arn:aws:ses:us-east-1:123456789012:identity/example.com, and the Source to be
* [email protected].
*
*
* Instead of using this parameter, you can use the X-header X-SES-SOURCE-ARN in the raw message of the
* email. If you use both the SourceArn parameter and the corresponding X-header, Amazon SES uses the
* value of the SourceArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in this guide,
* or see the Amazon SES Developer Guide.
*
*
*
* @param sourceArn
* This parameter is used only for sending authorization. It is the ARN of the identity that is associated
* with the sending authorization policy that permits you to send for the email address specified in the
* Source parameter.
*
* For example, if the owner of example.com (which has ARN
* arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that
* authorizes you to send from [email protected], then you would specify the
* SourceArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the
* Source to be [email protected].
*
*
* Instead of using this parameter, you can use the X-header X-SES-SOURCE-ARN in the raw message
* of the email. If you use both the SourceArn parameter and the corresponding X-header, Amazon
* SES uses the value of the SourceArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in this
* guide, or see the Amazon SES Developer Guide.
*
*/
public void setSourceArn(String sourceArn) {
this.sourceArn = sourceArn;
}
/**
*
* This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the
* sending authorization policy that permits you to send for the email address specified in the Source
* parameter.
*
*
* For example, if the owner of example.com (which has ARN
* arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you
* to send from [email protected], then you would specify the SourceArn to be
* arn:aws:ses:us-east-1:123456789012:identity/example.com, and the Source to be
* [email protected].
*
*
* Instead of using this parameter, you can use the X-header X-SES-SOURCE-ARN in the raw message of the
* email. If you use both the SourceArn parameter and the corresponding X-header, Amazon SES uses the
* value of the SourceArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in this guide,
* or see the Amazon SES Developer Guide.
*
*
*
* @return This parameter is used only for sending authorization. It is the ARN of the identity that is associated
* with the sending authorization policy that permits you to send for the email address specified in the
* Source parameter.
*
* For example, if the owner of example.com (which has ARN
* arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that
* authorizes you to send from [email protected], then you would specify the
* SourceArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and
* the Source to be [email protected].
*
*
* Instead of using this parameter, you can use the X-header X-SES-SOURCE-ARN in the raw
* message of the email. If you use both the SourceArn parameter and the corresponding
* X-header, Amazon SES uses the value of the SourceArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in
* this guide, or see the Amazon SES Developer Guide.
*
*/
public String getSourceArn() {
return this.sourceArn;
}
/**
*
* This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the
* sending authorization policy that permits you to send for the email address specified in the Source
* parameter.
*
*
* For example, if the owner of example.com (which has ARN
* arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you
* to send from [email protected], then you would specify the SourceArn to be
* arn:aws:ses:us-east-1:123456789012:identity/example.com, and the Source to be
* [email protected].
*
*
* Instead of using this parameter, you can use the X-header X-SES-SOURCE-ARN in the raw message of the
* email. If you use both the SourceArn parameter and the corresponding X-header, Amazon SES uses the
* value of the SourceArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in this guide,
* or see the Amazon SES Developer Guide.
*
*
*
* @param sourceArn
* This parameter is used only for sending authorization. It is the ARN of the identity that is associated
* with the sending authorization policy that permits you to send for the email address specified in the
* Source parameter.
*
* For example, if the owner of example.com (which has ARN
* arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that
* authorizes you to send from [email protected], then you would specify the
* SourceArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the
* Source to be [email protected].
*
*
* Instead of using this parameter, you can use the X-header X-SES-SOURCE-ARN in the raw message
* of the email. If you use both the SourceArn parameter and the corresponding X-header, Amazon
* SES uses the value of the SourceArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in this
* guide, or see the Amazon SES Developer Guide.
*
* @return Returns a reference to this object so that method calls can be chained together.
*/
public SendRawEmailRequest withSourceArn(String sourceArn) {
setSourceArn(sourceArn);
return this;
}
/**
*
* This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the
* sending authorization policy that permits you to use the email address specified in the ReturnPath
* parameter.
*
*
* For example, if the owner of example.com (which has ARN
* arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you
* to use [email protected], then you would specify the ReturnPathArn to be
* arn:aws:ses:us-east-1:123456789012:identity/example.com, and the ReturnPath to be
* [email protected].
*
*
* Instead of using this parameter, you can use the X-header X-SES-RETURN-PATH-ARN in the raw message
* of the email. If you use both the ReturnPathArn parameter and the corresponding X-header, Amazon SES
* uses the value of the ReturnPathArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in this guide,
* or see the Amazon SES Developer Guide.
*
*
*
* @param returnPathArn
* This parameter is used only for sending authorization. It is the ARN of the identity that is associated
* with the sending authorization policy that permits you to use the email address specified in the
* ReturnPath parameter.
*
* For example, if the owner of example.com (which has ARN
* arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that
* authorizes you to use [email protected], then you would specify the
* ReturnPathArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and
* the ReturnPath to be [email protected].
*
*
* Instead of using this parameter, you can use the X-header X-SES-RETURN-PATH-ARN in the raw
* message of the email. If you use both the ReturnPathArn parameter and the corresponding
* X-header, Amazon SES uses the value of the ReturnPathArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in this
* guide, or see the Amazon SES Developer Guide.
*
*/
public void setReturnPathArn(String returnPathArn) {
this.returnPathArn = returnPathArn;
}
/**
*
* This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the
* sending authorization policy that permits you to use the email address specified in the ReturnPath
* parameter.
*
*
* For example, if the owner of example.com (which has ARN
* arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you
* to use [email protected], then you would specify the ReturnPathArn to be
* arn:aws:ses:us-east-1:123456789012:identity/example.com, and the ReturnPath to be
* [email protected].
*
*
* Instead of using this parameter, you can use the X-header X-SES-RETURN-PATH-ARN in the raw message
* of the email. If you use both the ReturnPathArn parameter and the corresponding X-header, Amazon SES
* uses the value of the ReturnPathArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in this guide,
* or see the Amazon SES Developer Guide.
*
*
*
* @return This parameter is used only for sending authorization. It is the ARN of the identity that is associated
* with the sending authorization policy that permits you to use the email address specified in the
* ReturnPath parameter.
*
* For example, if the owner of example.com (which has ARN
* arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that
* authorizes you to use [email protected], then you would specify the
* ReturnPathArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com,
* and the ReturnPath to be [email protected].
*
*
* Instead of using this parameter, you can use the X-header X-SES-RETURN-PATH-ARN in the raw
* message of the email. If you use both the ReturnPathArn parameter and the corresponding
* X-header, Amazon SES uses the value of the ReturnPathArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in
* this guide, or see the Amazon SES Developer Guide.
*
*/
public String getReturnPathArn() {
return this.returnPathArn;
}
/**
*
* This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the
* sending authorization policy that permits you to use the email address specified in the ReturnPath
* parameter.
*
*
* For example, if the owner of example.com (which has ARN
* arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you
* to use [email protected], then you would specify the ReturnPathArn to be
* arn:aws:ses:us-east-1:123456789012:identity/example.com, and the ReturnPath to be
* [email protected].
*
*
* Instead of using this parameter, you can use the X-header X-SES-RETURN-PATH-ARN in the raw message
* of the email. If you use both the ReturnPathArn parameter and the corresponding X-header, Amazon SES
* uses the value of the ReturnPathArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in this guide,
* or see the Amazon SES Developer Guide.
*
*
*
* @param returnPathArn
* This parameter is used only for sending authorization. It is the ARN of the identity that is associated
* with the sending authorization policy that permits you to use the email address specified in the
* ReturnPath parameter.
*
* For example, if the owner of example.com (which has ARN
* arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that
* authorizes you to use [email protected], then you would specify the
* ReturnPathArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and
* the ReturnPath to be [email protected].
*
*
* Instead of using this parameter, you can use the X-header X-SES-RETURN-PATH-ARN in the raw
* message of the email. If you use both the ReturnPathArn parameter and the corresponding
* X-header, Amazon SES uses the value of the ReturnPathArn parameter.
*
*
*
* For information about when to use this parameter, see the description of SendRawEmail in this
* guide, or see the Amazon SES Developer Guide.
*
* @return Returns a reference to this object so that method calls can be chained together.
*/
public SendRawEmailRequest withReturnPathArn(String returnPathArn) {
setReturnPathArn(returnPathArn);
return this;
}
/**
* Returns a string representation of this object; useful for testing and debugging.
*
* @return A string representation of this object.
*
* @see java.lang.Object#toString()
*/
@Override
public String toString() {
StringBuilder sb = new StringBuilder();
sb.append("{");
if (getSource() != null)
sb.append("Source: " + getSource() + ",");
if (getDestinations() != null)
sb.append("Destinations: " + getDestinations() + ",");
if (getRawMessage() != null)
sb.append("RawMessage: " + getRawMessage() + ",");
if (getFromArn() != null)
sb.append("FromArn: " + getFromArn() + ",");
if (getSourceArn() != null)
sb.append("SourceArn: " + getSourceArn() + ",");
if (getReturnPathArn() != null)
sb.append("ReturnPathArn: " + getReturnPathArn());
sb.append("}");
return sb.toString();
}
@Override
public boolean equals(Object obj) {
if (this == obj)
return true;
if (obj == null)
return false;
if (obj instanceof SendRawEmailRequest == false)
return false;
SendRawEmailRequest other = (SendRawEmailRequest) obj;
if (other.getSource() == null ^ this.getSource() == null)
return false;
if (other.getSource() != null && other.getSource().equals(this.getSource()) == false)
return false;
if (other.getDestinations() == null ^ this.getDestinations() == null)
return false;
if (other.getDestinations() != null && other.getDestinations().equals(this.getDestinations()) == false)
return false;
if (other.getRawMessage() == null ^ this.getRawMessage() == null)
return false;
if (other.getRawMessage() != null && other.getRawMessage().equals(this.getRawMessage()) == false)
return false;
if (other.getFromArn() == null ^ this.getFromArn() == null)
return false;
if (other.getFromArn() != null && other.getFromArn().equals(this.getFromArn()) == false)
return false;
if (other.getSourceArn() == null ^ this.getSourceArn() == null)
return false;
if (other.getSourceArn() != null && other.getSourceArn().equals(this.getSourceArn()) == false)
return false;
if (other.getReturnPathArn() == null ^ this.getReturnPathArn() == null)
return false;
if (other.getReturnPathArn() != null && other.getReturnPathArn().equals(this.getReturnPathArn()) == false)
return false;
return true;
}
@Override
public int hashCode() {
final int prime = 31;
int hashCode = 1;
hashCode = prime * hashCode + ((getSource() == null) ? 0 : getSource().hashCode());
hashCode = prime * hashCode + ((getDestinations() == null) ? 0 : getDestinations().hashCode());
hashCode = prime * hashCode + ((getRawMessage() == null) ? 0 : getRawMessage().hashCode());
hashCode = prime * hashCode + ((getFromArn() == null) ? 0 : getFromArn().hashCode());
hashCode = prime * hashCode + ((getSourceArn() == null) ? 0 : getSourceArn().hashCode());
hashCode = prime * hashCode + ((getReturnPathArn() == null) ? 0 : getReturnPathArn().hashCode());
return hashCode;
}
@Override
public SendRawEmailRequest clone() {
return (SendRawEmailRequest) super.clone();
}
}