com.amazonaws.services.simpleworkflow.model.ContinueAsNewWorkflowExecutionDecisionAttributes Maven / Gradle / Ivy
/*
* Copyright 2012-2017 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with
* the License. A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions
* and limitations under the License.
*/
package com.amazonaws.services.simpleworkflow.model;
import java.io.Serializable;
import javax.annotation.Generated;
import com.amazonaws.protocol.StructuredPojo;
import com.amazonaws.protocol.ProtocolMarshaller;
/**
*
* Provides details of the ContinueAsNewWorkflowExecution decision.
*
*
* Access Control
*
*
* You can use IAM policies to control this decision's access to Amazon SWF resources as follows:
*
*
* - Use a
Resource element with the domain name to limit the action to only specified domains.
* - Use an
Action element to allow or deny permission to call this action.
* - Constrain the following parameters by using a
Condition element with the appropriate keys.
*
* -
tag: Optional.. A tag used to identify the workflow execution
* taskList: String constraint. The key is swf:taskList.name.workflowType.version: String constraint. The key is swf:workflowType.version.
*
*
*
* If the caller does not have sufficient permissions to invoke the action, or the parameter values fall outside the
* specified constraints, the action fails. The associated event attribute's cause parameter will be set to
* OPERATION_NOT_PERMITTED. For details and example IAM policies, see Using IAM to Manage Access to
* Amazon SWF Workflows.
*
*/
@Generated("com.amazonaws:aws-java-sdk-code-generator")
public class ContinueAsNewWorkflowExecutionDecisionAttributes implements Serializable, Cloneable, StructuredPojo {
/**
*
* The input provided to the new workflow execution.
*
*/
private String input;
/**
*
* If set, specifies the total duration for this workflow execution. This overrides the
* defaultExecutionStartToCloseTimeout specified when registering the workflow type.
*
*
* The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to
* specify unlimited duration.
*
* An execution start-to-close timeout for this workflow execution must be specified either as a default for
* the workflow type or through this field. If neither this field is set nor a default execution start-to-close
* timeout was specified at registration time then a fault will be returned.
*/
private String executionStartToCloseTimeout;
private TaskList taskList;
/**
*
* Optional. The task priority that, if set, specifies the priority for the decision tasks for this workflow
* execution. This overrides the defaultTaskPriority specified when registering the workflow type. Valid values are
* integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE
* (2147483647). Higher numbers indicate higher priority.
*
*
* For more information about setting task priority, see Setting Task
* Priority in the Amazon Simple Workflow Developer Guide.
*
*/
private String taskPriority;
/**
*
* Specifies the maximum duration of decision tasks for the new workflow execution. This parameter overrides the
* defaultTaskStartToCloseTimout specified when registering the workflow type using
* RegisterWorkflowType.
*
*
* The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to
* specify unlimited duration.
*
* A task start-to-close timeout for the new workflow execution must be specified either as a default for the
* workflow type or through this parameter. If neither this parameter is set nor a default task start-to-close
* timeout was specified at registration time then a fault will be returned.
*/
private String taskStartToCloseTimeout;
/**
*
* If set, specifies the policy to use for the child workflow executions of the new execution if it is terminated by
* calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy
* overrides the default child policy specified when registering the workflow type using
* RegisterWorkflowType.
*
*
* The supported child policies are:
*
*
* - TERMINATE: the child executions will be terminated.
* - REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a
*
WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate
* actions when it receives an execution history with this event.
* - ABANDON: no action will be taken. The child executions will continue to run.
*
* A child policy for this workflow execution must be specified either as a default for the workflow type or
* through this parameter. If neither this parameter is set nor a default child policy was specified at registration
* time then a fault will be returned.
*/
private String childPolicy;
/**
*
* The list of tags to associate with the new workflow execution. A maximum of 5 tags can be specified. You can list
* workflow executions with a specific tag by calling ListOpenWorkflowExecutions or
* ListClosedWorkflowExecutions and specifying a TagFilter.
*
*/
private java.util.List tagList;
private String workflowTypeVersion;
/**
*
* The ARN of an IAM role that authorizes Amazon SWF to invoke AWS Lambda functions.
*
* In order for this workflow execution to invoke AWS Lambda functions, an appropriate IAM role must be
* specified either as a default for the workflow type or through this field.
*/
private String lambdaRole;
/**
*
* The input provided to the new workflow execution.
*
*
* @param input
* The input provided to the new workflow execution.
*/
public void setInput(String input) {
this.input = input;
}
/**
*
* The input provided to the new workflow execution.
*
*
* @return The input provided to the new workflow execution.
*/
public String getInput() {
return this.input;
}
/**
*
* The input provided to the new workflow execution.
*
*
* @param input
* The input provided to the new workflow execution.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public ContinueAsNewWorkflowExecutionDecisionAttributes withInput(String input) {
setInput(input);
return this;
}
/**
*
* If set, specifies the total duration for this workflow execution. This overrides the
* defaultExecutionStartToCloseTimeout specified when registering the workflow type.
*
*
* The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to
* specify unlimited duration.
*
* An execution start-to-close timeout for this workflow execution must be specified either as a default for
* the workflow type or through this field. If neither this field is set nor a default execution start-to-close
* timeout was specified at registration time then a fault will be returned.
*
* @param executionStartToCloseTimeout
* If set, specifies the total duration for this workflow execution. This overrides the
* defaultExecutionStartToCloseTimeout specified when registering the workflow type.
*
* The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used
* to specify unlimited duration.
*
* An execution start-to-close timeout for this workflow execution must be specified either as a
* default for the workflow type or through this field. If neither this field is set nor a default execution
* start-to-close timeout was specified at registration time then a fault will be returned.
*/
public void setExecutionStartToCloseTimeout(String executionStartToCloseTimeout) {
this.executionStartToCloseTimeout = executionStartToCloseTimeout;
}
/**
*
* If set, specifies the total duration for this workflow execution. This overrides the
* defaultExecutionStartToCloseTimeout specified when registering the workflow type.
*
*
* The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to
* specify unlimited duration.
*
* An execution start-to-close timeout for this workflow execution must be specified either as a default for
* the workflow type or through this field. If neither this field is set nor a default execution start-to-close
* timeout was specified at registration time then a fault will be returned.
*
* @return If set, specifies the total duration for this workflow execution. This overrides the
* defaultExecutionStartToCloseTimeout specified when registering the workflow type.
*
* The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used
* to specify unlimited duration.
*
* An execution start-to-close timeout for this workflow execution must be specified either as a
* default for the workflow type or through this field. If neither this field is set nor a default execution
* start-to-close timeout was specified at registration time then a fault will be returned.
*/
public String getExecutionStartToCloseTimeout() {
return this.executionStartToCloseTimeout;
}
/**
*
* If set, specifies the total duration for this workflow execution. This overrides the
* defaultExecutionStartToCloseTimeout specified when registering the workflow type.
*
*
* The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to
* specify unlimited duration.
*
* An execution start-to-close timeout for this workflow execution must be specified either as a default for
* the workflow type or through this field. If neither this field is set nor a default execution start-to-close
* timeout was specified at registration time then a fault will be returned.
*
* @param executionStartToCloseTimeout
* If set, specifies the total duration for this workflow execution. This overrides the
* defaultExecutionStartToCloseTimeout specified when registering the workflow type.
*
* The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used
* to specify unlimited duration.
*
* An execution start-to-close timeout for this workflow execution must be specified either as a
* default for the workflow type or through this field. If neither this field is set nor a default execution
* start-to-close timeout was specified at registration time then a fault will be returned.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public ContinueAsNewWorkflowExecutionDecisionAttributes withExecutionStartToCloseTimeout(String executionStartToCloseTimeout) {
setExecutionStartToCloseTimeout(executionStartToCloseTimeout);
return this;
}
/**
* @param taskList
*/
public void setTaskList(TaskList taskList) {
this.taskList = taskList;
}
/**
* @return
*/
public TaskList getTaskList() {
return this.taskList;
}
/**
* @param taskList
* @return Returns a reference to this object so that method calls can be chained together.
*/
public ContinueAsNewWorkflowExecutionDecisionAttributes withTaskList(TaskList taskList) {
setTaskList(taskList);
return this;
}
/**
*
* Optional. The task priority that, if set, specifies the priority for the decision tasks for this workflow
* execution. This overrides the defaultTaskPriority specified when registering the workflow type. Valid values are
* integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE
* (2147483647). Higher numbers indicate higher priority.
*
*
* For more information about setting task priority, see Setting Task
* Priority in the Amazon Simple Workflow Developer Guide.
*
*
* @param taskPriority
* Optional. The task priority that, if set, specifies the priority for the decision tasks for this
* workflow execution. This overrides the defaultTaskPriority specified when registering the workflow type.
* Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to
* Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.
*
* For more information about setting task priority, see Setting Task
* Priority in the Amazon Simple Workflow Developer Guide
*/
public void setTaskPriority(String taskPriority) {
this.taskPriority = taskPriority;
}
/**
*
* Optional. The task priority that, if set, specifies the priority for the decision tasks for this workflow
* execution. This overrides the defaultTaskPriority specified when registering the workflow type. Valid values are
* integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE
* (2147483647). Higher numbers indicate higher priority.
*
*
* For more information about setting task priority, see Setting Task
* Priority in the Amazon Simple Workflow Developer Guide.
*
*
* @return Optional. The task priority that, if set, specifies the priority for the decision tasks for this
* workflow execution. This overrides the defaultTaskPriority specified when registering the workflow type.
* Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to
* Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.
*
* For more information about setting task priority, see Setting Task
* Priority in the Amazon Simple Workflow Developer Guide
*/
public String getTaskPriority() {
return this.taskPriority;
}
/**
*
* Optional. The task priority that, if set, specifies the priority for the decision tasks for this workflow
* execution. This overrides the defaultTaskPriority specified when registering the workflow type. Valid values are
* integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE
* (2147483647). Higher numbers indicate higher priority.
*
*
* For more information about setting task priority, see Setting Task
* Priority in the Amazon Simple Workflow Developer Guide.
*
*
* @param taskPriority
* Optional. The task priority that, if set, specifies the priority for the decision tasks for this
* workflow execution. This overrides the defaultTaskPriority specified when registering the workflow type.
* Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to
* Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.
*
* For more information about setting task priority, see Setting Task
* Priority in the Amazon Simple Workflow Developer Guide
* @return Returns a reference to this object so that method calls can be chained together.
*/
public ContinueAsNewWorkflowExecutionDecisionAttributes withTaskPriority(String taskPriority) {
setTaskPriority(taskPriority);
return this;
}
/**
*
* Specifies the maximum duration of decision tasks for the new workflow execution. This parameter overrides the
* defaultTaskStartToCloseTimout specified when registering the workflow type using
* RegisterWorkflowType.
*
*
* The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to
* specify unlimited duration.
*
* A task start-to-close timeout for the new workflow execution must be specified either as a default for the
* workflow type or through this parameter. If neither this parameter is set nor a default task start-to-close
* timeout was specified at registration time then a fault will be returned.
*
* @param taskStartToCloseTimeout
* Specifies the maximum duration of decision tasks for the new workflow execution. This parameter overrides
* the defaultTaskStartToCloseTimout specified when registering the workflow type using
* RegisterWorkflowType.
*
* The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used
* to specify unlimited duration.
*
* A task start-to-close timeout for the new workflow execution must be specified either as a default
* for the workflow type or through this parameter. If neither this parameter is set nor a default task
* start-to-close timeout was specified at registration time then a fault will be returned.
*/
public void setTaskStartToCloseTimeout(String taskStartToCloseTimeout) {
this.taskStartToCloseTimeout = taskStartToCloseTimeout;
}
/**
*
* Specifies the maximum duration of decision tasks for the new workflow execution. This parameter overrides the
* defaultTaskStartToCloseTimout specified when registering the workflow type using
* RegisterWorkflowType.
*
*
* The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to
* specify unlimited duration.
*
* A task start-to-close timeout for the new workflow execution must be specified either as a default for the
* workflow type or through this parameter. If neither this parameter is set nor a default task start-to-close
* timeout was specified at registration time then a fault will be returned.
*
* @return Specifies the maximum duration of decision tasks for the new workflow execution. This parameter overrides
* the defaultTaskStartToCloseTimout specified when registering the workflow type using
* RegisterWorkflowType.
*
* The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used
* to specify unlimited duration.
*
* A task start-to-close timeout for the new workflow execution must be specified either as a default
* for the workflow type or through this parameter. If neither this parameter is set nor a default task
* start-to-close timeout was specified at registration time then a fault will be returned.
*/
public String getTaskStartToCloseTimeout() {
return this.taskStartToCloseTimeout;
}
/**
*
* Specifies the maximum duration of decision tasks for the new workflow execution. This parameter overrides the
* defaultTaskStartToCloseTimout specified when registering the workflow type using
* RegisterWorkflowType.
*
*
* The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to
* specify unlimited duration.
*
* A task start-to-close timeout for the new workflow execution must be specified either as a default for the
* workflow type or through this parameter. If neither this parameter is set nor a default task start-to-close
* timeout was specified at registration time then a fault will be returned.
*
* @param taskStartToCloseTimeout
* Specifies the maximum duration of decision tasks for the new workflow execution. This parameter overrides
* the defaultTaskStartToCloseTimout specified when registering the workflow type using
* RegisterWorkflowType.
*
* The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used
* to specify unlimited duration.
*
* A task start-to-close timeout for the new workflow execution must be specified either as a default
* for the workflow type or through this parameter. If neither this parameter is set nor a default task
* start-to-close timeout was specified at registration time then a fault will be returned.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public ContinueAsNewWorkflowExecutionDecisionAttributes withTaskStartToCloseTimeout(String taskStartToCloseTimeout) {
setTaskStartToCloseTimeout(taskStartToCloseTimeout);
return this;
}
/**
*
* If set, specifies the policy to use for the child workflow executions of the new execution if it is terminated by
* calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy
* overrides the default child policy specified when registering the workflow type using
* RegisterWorkflowType.
*
*
* The supported child policies are:
*
*
* - TERMINATE: the child executions will be terminated.
* - REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a
*
WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate
* actions when it receives an execution history with this event.
* - ABANDON: no action will be taken. The child executions will continue to run.
*
* A child policy for this workflow execution must be specified either as a default for the workflow type or
* through this parameter. If neither this parameter is set nor a default child policy was specified at registration
* time then a fault will be returned.
*
* @param childPolicy
* If set, specifies the policy to use for the child workflow executions of the new execution if it is
* terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired
* timeout. This policy overrides the default child policy specified when registering the workflow type using
* RegisterWorkflowType.
*
* The supported child policies are:
*
*
* - TERMINATE: the child executions will be terminated.
* - REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a
*
WorkflowExecutionCancelRequested event in its history. It is up to the decider to take
* appropriate actions when it receives an execution history with this event.
* - ABANDON: no action will be taken. The child executions will continue to run.
*
* A child policy for this workflow execution must be specified either as a default for the workflow
* type or through this parameter. If neither this parameter is set nor a default child policy was specified
* at registration time then a fault will be returned.
* @see ChildPolicy
*/
public void setChildPolicy(String childPolicy) {
this.childPolicy = childPolicy;
}
/**
*
* If set, specifies the policy to use for the child workflow executions of the new execution if it is terminated by
* calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy
* overrides the default child policy specified when registering the workflow type using
* RegisterWorkflowType.
*
*
* The supported child policies are:
*
*
* - TERMINATE: the child executions will be terminated.
* - REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a
*
WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate
* actions when it receives an execution history with this event.
* - ABANDON: no action will be taken. The child executions will continue to run.
*
* A child policy for this workflow execution must be specified either as a default for the workflow type or
* through this parameter. If neither this parameter is set nor a default child policy was specified at registration
* time then a fault will be returned.
*
* @return If set, specifies the policy to use for the child workflow executions of the new execution if it is
* terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired
* timeout. This policy overrides the default child policy specified when registering the workflow type
* using RegisterWorkflowType.
*
* The supported child policies are:
*
*
* - TERMINATE: the child executions will be terminated.
* - REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a
*
WorkflowExecutionCancelRequested event in its history. It is up to the decider to take
* appropriate actions when it receives an execution history with this event.
* - ABANDON: no action will be taken. The child executions will continue to run.
*
* A child policy for this workflow execution must be specified either as a default for the workflow
* type or through this parameter. If neither this parameter is set nor a default child policy was specified
* at registration time then a fault will be returned.
* @see ChildPolicy
*/
public String getChildPolicy() {
return this.childPolicy;
}
/**
*
* If set, specifies the policy to use for the child workflow executions of the new execution if it is terminated by
* calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy
* overrides the default child policy specified when registering the workflow type using
* RegisterWorkflowType.
*
*
* The supported child policies are:
*
*
* - TERMINATE: the child executions will be terminated.
* - REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a
*
WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate
* actions when it receives an execution history with this event.
* - ABANDON: no action will be taken. The child executions will continue to run.
*
* A child policy for this workflow execution must be specified either as a default for the workflow type or
* through this parameter. If neither this parameter is set nor a default child policy was specified at registration
* time then a fault will be returned.
*
* @param childPolicy
* If set, specifies the policy to use for the child workflow executions of the new execution if it is
* terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired
* timeout. This policy overrides the default child policy specified when registering the workflow type using
* RegisterWorkflowType.
*
* The supported child policies are:
*
*
* - TERMINATE: the child executions will be terminated.
* - REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a
*
WorkflowExecutionCancelRequested event in its history. It is up to the decider to take
* appropriate actions when it receives an execution history with this event.
* - ABANDON: no action will be taken. The child executions will continue to run.
*
* A child policy for this workflow execution must be specified either as a default for the workflow
* type or through this parameter. If neither this parameter is set nor a default child policy was specified
* at registration time then a fault will be returned.
* @return Returns a reference to this object so that method calls can be chained together.
* @see ChildPolicy
*/
public ContinueAsNewWorkflowExecutionDecisionAttributes withChildPolicy(String childPolicy) {
setChildPolicy(childPolicy);
return this;
}
/**
*
* If set, specifies the policy to use for the child workflow executions of the new execution if it is terminated by
* calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy
* overrides the default child policy specified when registering the workflow type using
* RegisterWorkflowType.
*
*
* The supported child policies are:
*
*
* - TERMINATE: the child executions will be terminated.
* - REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a
*
WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate
* actions when it receives an execution history with this event.
* - ABANDON: no action will be taken. The child executions will continue to run.
*
* A child policy for this workflow execution must be specified either as a default for the workflow type or
* through this parameter. If neither this parameter is set nor a default child policy was specified at registration
* time then a fault will be returned.
*
* @param childPolicy
* If set, specifies the policy to use for the child workflow executions of the new execution if it is
* terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired
* timeout. This policy overrides the default child policy specified when registering the workflow type using
* RegisterWorkflowType.
*
* The supported child policies are:
*
*
* - TERMINATE: the child executions will be terminated.
* - REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a
*
WorkflowExecutionCancelRequested event in its history. It is up to the decider to take
* appropriate actions when it receives an execution history with this event.
* - ABANDON: no action will be taken. The child executions will continue to run.
*
* A child policy for this workflow execution must be specified either as a default for the workflow
* type or through this parameter. If neither this parameter is set nor a default child policy was specified
* at registration time then a fault will be returned.
* @see ChildPolicy
*/
public void setChildPolicy(ChildPolicy childPolicy) {
this.childPolicy = childPolicy.toString();
}
/**
*
* If set, specifies the policy to use for the child workflow executions of the new execution if it is terminated by
* calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy
* overrides the default child policy specified when registering the workflow type using
* RegisterWorkflowType.
*
*
* The supported child policies are:
*
*
* - TERMINATE: the child executions will be terminated.
* - REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a
*
WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate
* actions when it receives an execution history with this event.
* - ABANDON: no action will be taken. The child executions will continue to run.
*
* A child policy for this workflow execution must be specified either as a default for the workflow type or
* through this parameter. If neither this parameter is set nor a default child policy was specified at registration
* time then a fault will be returned.
*
* @param childPolicy
* If set, specifies the policy to use for the child workflow executions of the new execution if it is
* terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired
* timeout. This policy overrides the default child policy specified when registering the workflow type using
* RegisterWorkflowType.
*
* The supported child policies are:
*
*
* - TERMINATE: the child executions will be terminated.
* - REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a
*
WorkflowExecutionCancelRequested event in its history. It is up to the decider to take
* appropriate actions when it receives an execution history with this event.
* - ABANDON: no action will be taken. The child executions will continue to run.
*
* A child policy for this workflow execution must be specified either as a default for the workflow
* type or through this parameter. If neither this parameter is set nor a default child policy was specified
* at registration time then a fault will be returned.
* @return Returns a reference to this object so that method calls can be chained together.
* @see ChildPolicy
*/
public ContinueAsNewWorkflowExecutionDecisionAttributes withChildPolicy(ChildPolicy childPolicy) {
setChildPolicy(childPolicy);
return this;
}
/**
*
* The list of tags to associate with the new workflow execution. A maximum of 5 tags can be specified. You can list
* workflow executions with a specific tag by calling ListOpenWorkflowExecutions or
* ListClosedWorkflowExecutions and specifying a TagFilter.
*
*
* @return The list of tags to associate with the new workflow execution. A maximum of 5 tags can be specified. You
* can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or
* ListClosedWorkflowExecutions and specifying a TagFilter.
*/
public java.util.List getTagList() {
return tagList;
}
/**
*
* The list of tags to associate with the new workflow execution. A maximum of 5 tags can be specified. You can list
* workflow executions with a specific tag by calling ListOpenWorkflowExecutions or
* ListClosedWorkflowExecutions and specifying a TagFilter.
*
*
* @param tagList
* The list of tags to associate with the new workflow execution. A maximum of 5 tags can be specified. You
* can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or
* ListClosedWorkflowExecutions and specifying a TagFilter.
*/
public void setTagList(java.util.Collection tagList) {
if (tagList == null) {
this.tagList = null;
return;
}
this.tagList = new java.util.ArrayList(tagList);
}
/**
*
* The list of tags to associate with the new workflow execution. A maximum of 5 tags can be specified. You can list
* workflow executions with a specific tag by calling ListOpenWorkflowExecutions or
* ListClosedWorkflowExecutions and specifying a TagFilter.
*
*
* NOTE: This method appends the values to the existing list (if any). Use
* {@link #setTagList(java.util.Collection)} or {@link #withTagList(java.util.Collection)} if you want to override
* the existing values.
*
*
* @param tagList
* The list of tags to associate with the new workflow execution. A maximum of 5 tags can be specified. You
* can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or
* ListClosedWorkflowExecutions and specifying a TagFilter.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public ContinueAsNewWorkflowExecutionDecisionAttributes withTagList(String... tagList) {
if (this.tagList == null) {
setTagList(new java.util.ArrayList(tagList.length));
}
for (String ele : tagList) {
this.tagList.add(ele);
}
return this;
}
/**
*
* The list of tags to associate with the new workflow execution. A maximum of 5 tags can be specified. You can list
* workflow executions with a specific tag by calling ListOpenWorkflowExecutions or
* ListClosedWorkflowExecutions and specifying a TagFilter.
*
*
* @param tagList
* The list of tags to associate with the new workflow execution. A maximum of 5 tags can be specified. You
* can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or
* ListClosedWorkflowExecutions and specifying a TagFilter.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public ContinueAsNewWorkflowExecutionDecisionAttributes withTagList(java.util.Collection tagList) {
setTagList(tagList);
return this;
}
/**
* @param workflowTypeVersion
*/
public void setWorkflowTypeVersion(String workflowTypeVersion) {
this.workflowTypeVersion = workflowTypeVersion;
}
/**
* @return
*/
public String getWorkflowTypeVersion() {
return this.workflowTypeVersion;
}
/**
* @param workflowTypeVersion
* @return Returns a reference to this object so that method calls can be chained together.
*/
public ContinueAsNewWorkflowExecutionDecisionAttributes withWorkflowTypeVersion(String workflowTypeVersion) {
setWorkflowTypeVersion(workflowTypeVersion);
return this;
}
/**
*
* The ARN of an IAM role that authorizes Amazon SWF to invoke AWS Lambda functions.
*
* In order for this workflow execution to invoke AWS Lambda functions, an appropriate IAM role must be
* specified either as a default for the workflow type or through this field.
*
* @param lambdaRole
* The ARN of an IAM role that authorizes Amazon SWF to invoke AWS Lambda functions. In order for
* this workflow execution to invoke AWS Lambda functions, an appropriate IAM role must be specified either
* as a default for the workflow type or through this field.
*/
public void setLambdaRole(String lambdaRole) {
this.lambdaRole = lambdaRole;
}
/**
*
* The ARN of an IAM role that authorizes Amazon SWF to invoke AWS Lambda functions.
*
* In order for this workflow execution to invoke AWS Lambda functions, an appropriate IAM role must be
* specified either as a default for the workflow type or through this field.
*
* @return The ARN of an IAM role that authorizes Amazon SWF to invoke AWS Lambda functions. In order for
* this workflow execution to invoke AWS Lambda functions, an appropriate IAM role must be specified either
* as a default for the workflow type or through this field.
*/
public String getLambdaRole() {
return this.lambdaRole;
}
/**
*
* The ARN of an IAM role that authorizes Amazon SWF to invoke AWS Lambda functions.
*
* In order for this workflow execution to invoke AWS Lambda functions, an appropriate IAM role must be
* specified either as a default for the workflow type or through this field.
*
* @param lambdaRole
* The ARN of an IAM role that authorizes Amazon SWF to invoke AWS Lambda functions. In order for
* this workflow execution to invoke AWS Lambda functions, an appropriate IAM role must be specified either
* as a default for the workflow type or through this field.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public ContinueAsNewWorkflowExecutionDecisionAttributes withLambdaRole(String lambdaRole) {
setLambdaRole(lambdaRole);
return this;
}
/**
* Returns a string representation of this object; useful for testing and debugging.
*
* @return A string representation of this object.
*
* @see java.lang.Object#toString()
*/
@Override
public String toString() {
StringBuilder sb = new StringBuilder();
sb.append("{");
if (getInput() != null)
sb.append("Input: ").append(getInput()).append(",");
if (getExecutionStartToCloseTimeout() != null)
sb.append("ExecutionStartToCloseTimeout: ").append(getExecutionStartToCloseTimeout()).append(",");
if (getTaskList() != null)
sb.append("TaskList: ").append(getTaskList()).append(",");
if (getTaskPriority() != null)
sb.append("TaskPriority: ").append(getTaskPriority()).append(",");
if (getTaskStartToCloseTimeout() != null)
sb.append("TaskStartToCloseTimeout: ").append(getTaskStartToCloseTimeout()).append(",");
if (getChildPolicy() != null)
sb.append("ChildPolicy: ").append(getChildPolicy()).append(",");
if (getTagList() != null)
sb.append("TagList: ").append(getTagList()).append(",");
if (getWorkflowTypeVersion() != null)
sb.append("WorkflowTypeVersion: ").append(getWorkflowTypeVersion()).append(",");
if (getLambdaRole() != null)
sb.append("LambdaRole: ").append(getLambdaRole());
sb.append("}");
return sb.toString();
}
@Override
public boolean equals(Object obj) {
if (this == obj)
return true;
if (obj == null)
return false;
if (obj instanceof ContinueAsNewWorkflowExecutionDecisionAttributes == false)
return false;
ContinueAsNewWorkflowExecutionDecisionAttributes other = (ContinueAsNewWorkflowExecutionDecisionAttributes) obj;
if (other.getInput() == null ^ this.getInput() == null)
return false;
if (other.getInput() != null && other.getInput().equals(this.getInput()) == false)
return false;
if (other.getExecutionStartToCloseTimeout() == null ^ this.getExecutionStartToCloseTimeout() == null)
return false;
if (other.getExecutionStartToCloseTimeout() != null && other.getExecutionStartToCloseTimeout().equals(this.getExecutionStartToCloseTimeout()) == false)
return false;
if (other.getTaskList() == null ^ this.getTaskList() == null)
return false;
if (other.getTaskList() != null && other.getTaskList().equals(this.getTaskList()) == false)
return false;
if (other.getTaskPriority() == null ^ this.getTaskPriority() == null)
return false;
if (other.getTaskPriority() != null && other.getTaskPriority().equals(this.getTaskPriority()) == false)
return false;
if (other.getTaskStartToCloseTimeout() == null ^ this.getTaskStartToCloseTimeout() == null)
return false;
if (other.getTaskStartToCloseTimeout() != null && other.getTaskStartToCloseTimeout().equals(this.getTaskStartToCloseTimeout()) == false)
return false;
if (other.getChildPolicy() == null ^ this.getChildPolicy() == null)
return false;
if (other.getChildPolicy() != null && other.getChildPolicy().equals(this.getChildPolicy()) == false)
return false;
if (other.getTagList() == null ^ this.getTagList() == null)
return false;
if (other.getTagList() != null && other.getTagList().equals(this.getTagList()) == false)
return false;
if (other.getWorkflowTypeVersion() == null ^ this.getWorkflowTypeVersion() == null)
return false;
if (other.getWorkflowTypeVersion() != null && other.getWorkflowTypeVersion().equals(this.getWorkflowTypeVersion()) == false)
return false;
if (other.getLambdaRole() == null ^ this.getLambdaRole() == null)
return false;
if (other.getLambdaRole() != null && other.getLambdaRole().equals(this.getLambdaRole()) == false)
return false;
return true;
}
@Override
public int hashCode() {
final int prime = 31;
int hashCode = 1;
hashCode = prime * hashCode + ((getInput() == null) ? 0 : getInput().hashCode());
hashCode = prime * hashCode + ((getExecutionStartToCloseTimeout() == null) ? 0 : getExecutionStartToCloseTimeout().hashCode());
hashCode = prime * hashCode + ((getTaskList() == null) ? 0 : getTaskList().hashCode());
hashCode = prime * hashCode + ((getTaskPriority() == null) ? 0 : getTaskPriority().hashCode());
hashCode = prime * hashCode + ((getTaskStartToCloseTimeout() == null) ? 0 : getTaskStartToCloseTimeout().hashCode());
hashCode = prime * hashCode + ((getChildPolicy() == null) ? 0 : getChildPolicy().hashCode());
hashCode = prime * hashCode + ((getTagList() == null) ? 0 : getTagList().hashCode());
hashCode = prime * hashCode + ((getWorkflowTypeVersion() == null) ? 0 : getWorkflowTypeVersion().hashCode());
hashCode = prime * hashCode + ((getLambdaRole() == null) ? 0 : getLambdaRole().hashCode());
return hashCode;
}
@Override
public ContinueAsNewWorkflowExecutionDecisionAttributes clone() {
try {
return (ContinueAsNewWorkflowExecutionDecisionAttributes) super.clone();
} catch (CloneNotSupportedException e) {
throw new IllegalStateException("Got a CloneNotSupportedException from Object.clone() " + "even though we're Cloneable!", e);
}
}
@com.amazonaws.annotation.SdkInternalApi
@Override
public void marshall(ProtocolMarshaller protocolMarshaller) {
com.amazonaws.services.simpleworkflow.model.transform.ContinueAsNewWorkflowExecutionDecisionAttributesMarshaller.getInstance().marshall(this,
protocolMarshaller);
}
}