com.amazonaws.services.simpleworkflow.model.StartChildWorkflowExecutionDecisionAttributes Maven / Gradle / Ivy
/*
* Copyright 2012-2017 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with
* the License. A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions
* and limitations under the License.
*/
package com.amazonaws.services.simpleworkflow.model;
import java.io.Serializable;
import javax.annotation.Generated;
import com.amazonaws.protocol.StructuredPojo;
import com.amazonaws.protocol.ProtocolMarshaller;
/**
*
* Provides the details of the StartChildWorkflowExecution decision.
*
*
* Access Control
*
*
* You can use IAM policies to control this decision's access to Amazon SWF resources as follows:
*
*
* -
*
* Use a Resource element with the domain name to limit the action to only specified domains.
*
*
* -
*
* Use an Action element to allow or deny permission to call this action.
*
*
* -
*
* Constrain the following parameters by using a Condition element with the appropriate keys.
*
*
* -
*
* tagList.member.N – The key is "swf:tagList.N" where N is the tag number from 0 to 4, inclusive.
*
*
* -
*
* taskList – String constraint. The key is swf:taskList.name.
*
*
* -
*
* workflowType.name – String constraint. The key is swf:workflowType.name.
*
*
* -
*
* workflowType.version – String constraint. The key is swf:workflowType.version.
*
*
*
*
*
*
* If the caller doesn't have sufficient permissions to invoke the action, or the parameter values fall outside the
* specified constraints, the action fails. The associated event attribute's cause parameter is set to
* OPERATION_NOT_PERMITTED. For details and example IAM policies, see Using IAM to Manage Access to
* Amazon SWF Workflows in the Amazon SWF Developer Guide.
*
*
* @see AWS API Documentation
*/
@Generated("com.amazonaws:aws-java-sdk-code-generator")
public class StartChildWorkflowExecutionDecisionAttributes implements Serializable, Cloneable, StructuredPojo {
/**
*
* The type of the workflow execution to be started.
*
*/
private WorkflowType workflowType;
/**
*
* The workflowId of the workflow execution.
*
*
* The specified string must not start or end with whitespace. It must not contain a : (colon),
* / (slash), | (vertical bar), or any control characters (\u0000-\u001f |
* \u007f-\u009f). Also, it must not contain the literal string arn.
*
*/
private String workflowId;
/**
*
* The data attached to the event that can be used by the decider in subsequent workflow tasks. This data isn't sent
* to the child workflow execution.
*
*/
private String control;
/**
*
* The input to be provided to the workflow execution.
*
*/
private String input;
/**
*
* The total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout specified
* when registering the workflow type.
*
*
* The duration is specified in seconds, an integer greater than or equal to 0. You can use
* NONE to specify unlimited duration.
*
*
*
* An execution start-to-close timeout for this workflow execution must be specified either as a default for the
* workflow type or through this parameter. If neither this parameter is set nor a default execution start-to-close
* timeout was specified at registration time then a fault is returned.
*
*
*/
private String executionStartToCloseTimeout;
/**
*
* The name of the task list to be used for decision tasks of the child workflow execution.
*
*
*
* A task list for this workflow execution must be specified either as a default for the workflow type or through
* this parameter. If neither this parameter is set nor a default task list was specified at registration time then
* a fault is returned.
*
*
*
* The specified string must not start or end with whitespace. It must not contain a : (colon),
* / (slash), | (vertical bar), or any control characters (\u0000-\u001f |
* \u007f-\u009f). Also, it must not contain the literal string arn.
*
*/
private TaskList taskList;
/**
*
* A task priority that, if set, specifies the priority for a decision task of this workflow execution. This
* overrides the defaultTaskPriority specified when registering the workflow type. Valid values are integers that
* range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647).
* Higher numbers indicate higher priority.
*
*
* For more information about setting task priority, see Setting Task
* Priority in the Amazon SWF Developer Guide.
*
*/
private String taskPriority;
/**
*
* Specifies the maximum duration of decision tasks for this workflow execution. This parameter overrides the
* defaultTaskStartToCloseTimout specified when registering the workflow type using
* RegisterWorkflowType.
*
*
* The duration is specified in seconds, an integer greater than or equal to 0. You can use
* NONE to specify unlimited duration.
*
*
*
* A task start-to-close timeout for this workflow execution must be specified either as a default for the workflow
* type or through this parameter. If neither this parameter is set nor a default task start-to-close timeout was
* specified at registration time then a fault is returned.
*
*
*/
private String taskStartToCloseTimeout;
/**
*
* If set, specifies the policy to use for the child workflow executions if the workflow execution being started is
* terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This
* policy overrides the default child policy specified when registering the workflow type using
* RegisterWorkflowType.
*
*
* The supported child policies are:
*
*
* -
*
* TERMINATE – The child executions are terminated.
*
*
* -
*
* REQUEST_CANCEL – A request to cancel is attempted for each child execution by recording a
* WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate
* actions when it receives an execution history with this event.
*
*
* -
*
* ABANDON – No action is taken. The child executions continue to run.
*
*
*
*
*
* A child policy for this workflow execution must be specified either as a default for the workflow type or through
* this parameter. If neither this parameter is set nor a default child policy was specified at registration time
* then a fault is returned.
*
*
*/
private String childPolicy;
/**
*
* The list of tags to associate with the child workflow execution. A maximum of 5 tags can be specified. You can
* list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or
* ListClosedWorkflowExecutions and specifying a TagFilter.
*
*/
private java.util.List tagList;
/**
*
* The IAM role attached to the child workflow execution.
*
*/
private String lambdaRole;
/**
*
* The type of the workflow execution to be started.
*
*
* @param workflowType
* The type of the workflow execution to be started.
*/
public void setWorkflowType(WorkflowType workflowType) {
this.workflowType = workflowType;
}
/**
*
* The type of the workflow execution to be started.
*
*
* @return The type of the workflow execution to be started.
*/
public WorkflowType getWorkflowType() {
return this.workflowType;
}
/**
*
* The type of the workflow execution to be started.
*
*
* @param workflowType
* The type of the workflow execution to be started.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public StartChildWorkflowExecutionDecisionAttributes withWorkflowType(WorkflowType workflowType) {
setWorkflowType(workflowType);
return this;
}
/**
*
* The workflowId of the workflow execution.
*
*
* The specified string must not start or end with whitespace. It must not contain a : (colon),
* / (slash), | (vertical bar), or any control characters (\u0000-\u001f |
* \u007f-\u009f). Also, it must not contain the literal string arn.
*
*
* @param workflowId
* The workflowId of the workflow execution.
*
* The specified string must not start or end with whitespace. It must not contain a : (colon),
* / (slash), | (vertical bar), or any control characters (
* \u0000-\u001f | \u007f-\u009f). Also, it must not contain the literal string
* arn.
*/
public void setWorkflowId(String workflowId) {
this.workflowId = workflowId;
}
/**
*
* The workflowId of the workflow execution.
*
*
* The specified string must not start or end with whitespace. It must not contain a : (colon),
* / (slash), | (vertical bar), or any control characters (\u0000-\u001f |
* \u007f-\u009f). Also, it must not contain the literal string arn.
*
*
* @return The workflowId of the workflow execution.
*
* The specified string must not start or end with whitespace. It must not contain a : (colon),
* / (slash), | (vertical bar), or any control characters (
* \u0000-\u001f | \u007f-\u009f). Also, it must not contain the literal string
* arn.
*/
public String getWorkflowId() {
return this.workflowId;
}
/**
*
* The workflowId of the workflow execution.
*
*
* The specified string must not start or end with whitespace. It must not contain a : (colon),
* / (slash), | (vertical bar), or any control characters (\u0000-\u001f |
* \u007f-\u009f). Also, it must not contain the literal string arn.
*
*
* @param workflowId
* The workflowId of the workflow execution.
*
* The specified string must not start or end with whitespace. It must not contain a : (colon),
* / (slash), | (vertical bar), or any control characters (
* \u0000-\u001f | \u007f-\u009f). Also, it must not contain the literal string
* arn.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public StartChildWorkflowExecutionDecisionAttributes withWorkflowId(String workflowId) {
setWorkflowId(workflowId);
return this;
}
/**
*
* The data attached to the event that can be used by the decider in subsequent workflow tasks. This data isn't sent
* to the child workflow execution.
*
*
* @param control
* The data attached to the event that can be used by the decider in subsequent workflow tasks. This data
* isn't sent to the child workflow execution.
*/
public void setControl(String control) {
this.control = control;
}
/**
*
* The data attached to the event that can be used by the decider in subsequent workflow tasks. This data isn't sent
* to the child workflow execution.
*
*
* @return The data attached to the event that can be used by the decider in subsequent workflow tasks. This data
* isn't sent to the child workflow execution.
*/
public String getControl() {
return this.control;
}
/**
*
* The data attached to the event that can be used by the decider in subsequent workflow tasks. This data isn't sent
* to the child workflow execution.
*
*
* @param control
* The data attached to the event that can be used by the decider in subsequent workflow tasks. This data
* isn't sent to the child workflow execution.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public StartChildWorkflowExecutionDecisionAttributes withControl(String control) {
setControl(control);
return this;
}
/**
*
* The input to be provided to the workflow execution.
*
*
* @param input
* The input to be provided to the workflow execution.
*/
public void setInput(String input) {
this.input = input;
}
/**
*
* The input to be provided to the workflow execution.
*
*
* @return The input to be provided to the workflow execution.
*/
public String getInput() {
return this.input;
}
/**
*
* The input to be provided to the workflow execution.
*
*
* @param input
* The input to be provided to the workflow execution.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public StartChildWorkflowExecutionDecisionAttributes withInput(String input) {
setInput(input);
return this;
}
/**
*
* The total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout specified
* when registering the workflow type.
*
*
* The duration is specified in seconds, an integer greater than or equal to 0. You can use
* NONE to specify unlimited duration.
*
*
*
* An execution start-to-close timeout for this workflow execution must be specified either as a default for the
* workflow type or through this parameter. If neither this parameter is set nor a default execution start-to-close
* timeout was specified at registration time then a fault is returned.
*
*
*
* @param executionStartToCloseTimeout
* The total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout
* specified when registering the workflow type.
*
* The duration is specified in seconds, an integer greater than or equal to 0. You can use
* NONE to specify unlimited duration.
*
*
*
* An execution start-to-close timeout for this workflow execution must be specified either as a default for
* the workflow type or through this parameter. If neither this parameter is set nor a default execution
* start-to-close timeout was specified at registration time then a fault is returned.
*
*/
public void setExecutionStartToCloseTimeout(String executionStartToCloseTimeout) {
this.executionStartToCloseTimeout = executionStartToCloseTimeout;
}
/**
*
* The total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout specified
* when registering the workflow type.
*
*
* The duration is specified in seconds, an integer greater than or equal to 0. You can use
* NONE to specify unlimited duration.
*
*
*
* An execution start-to-close timeout for this workflow execution must be specified either as a default for the
* workflow type or through this parameter. If neither this parameter is set nor a default execution start-to-close
* timeout was specified at registration time then a fault is returned.
*
*
*
* @return The total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout
* specified when registering the workflow type.
*
* The duration is specified in seconds, an integer greater than or equal to 0. You can use
* NONE to specify unlimited duration.
*
*
*
* An execution start-to-close timeout for this workflow execution must be specified either as a default for
* the workflow type or through this parameter. If neither this parameter is set nor a default execution
* start-to-close timeout was specified at registration time then a fault is returned.
*
*/
public String getExecutionStartToCloseTimeout() {
return this.executionStartToCloseTimeout;
}
/**
*
* The total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout specified
* when registering the workflow type.
*
*
* The duration is specified in seconds, an integer greater than or equal to 0. You can use
* NONE to specify unlimited duration.
*
*
*
* An execution start-to-close timeout for this workflow execution must be specified either as a default for the
* workflow type or through this parameter. If neither this parameter is set nor a default execution start-to-close
* timeout was specified at registration time then a fault is returned.
*
*
*
* @param executionStartToCloseTimeout
* The total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout
* specified when registering the workflow type.
*
* The duration is specified in seconds, an integer greater than or equal to 0. You can use
* NONE to specify unlimited duration.
*
*
*
* An execution start-to-close timeout for this workflow execution must be specified either as a default for
* the workflow type or through this parameter. If neither this parameter is set nor a default execution
* start-to-close timeout was specified at registration time then a fault is returned.
*
* @return Returns a reference to this object so that method calls can be chained together.
*/
public StartChildWorkflowExecutionDecisionAttributes withExecutionStartToCloseTimeout(String executionStartToCloseTimeout) {
setExecutionStartToCloseTimeout(executionStartToCloseTimeout);
return this;
}
/**
*
* The name of the task list to be used for decision tasks of the child workflow execution.
*
*
*
* A task list for this workflow execution must be specified either as a default for the workflow type or through
* this parameter. If neither this parameter is set nor a default task list was specified at registration time then
* a fault is returned.
*
*
*
* The specified string must not start or end with whitespace. It must not contain a : (colon),
* / (slash), | (vertical bar), or any control characters (\u0000-\u001f |
* \u007f-\u009f). Also, it must not contain the literal string arn.
*
*
* @param taskList
* The name of the task list to be used for decision tasks of the child workflow execution.
*
* A task list for this workflow execution must be specified either as a default for the workflow type or
* through this parameter. If neither this parameter is set nor a default task list was specified at
* registration time then a fault is returned.
*
*
*
* The specified string must not start or end with whitespace. It must not contain a : (colon),
* / (slash), | (vertical bar), or any control characters (
* \u0000-\u001f | \u007f-\u009f). Also, it must not contain the literal string
* arn.
*/
public void setTaskList(TaskList taskList) {
this.taskList = taskList;
}
/**
*
* The name of the task list to be used for decision tasks of the child workflow execution.
*
*
*
* A task list for this workflow execution must be specified either as a default for the workflow type or through
* this parameter. If neither this parameter is set nor a default task list was specified at registration time then
* a fault is returned.
*
*
*
* The specified string must not start or end with whitespace. It must not contain a : (colon),
* / (slash), | (vertical bar), or any control characters (\u0000-\u001f |
* \u007f-\u009f). Also, it must not contain the literal string arn.
*
*
* @return The name of the task list to be used for decision tasks of the child workflow execution.
*
* A task list for this workflow execution must be specified either as a default for the workflow type or
* through this parameter. If neither this parameter is set nor a default task list was specified at
* registration time then a fault is returned.
*
*
*
* The specified string must not start or end with whitespace. It must not contain a : (colon),
* / (slash), | (vertical bar), or any control characters (
* \u0000-\u001f | \u007f-\u009f). Also, it must not contain the literal string
* arn.
*/
public TaskList getTaskList() {
return this.taskList;
}
/**
*
* The name of the task list to be used for decision tasks of the child workflow execution.
*
*
*
* A task list for this workflow execution must be specified either as a default for the workflow type or through
* this parameter. If neither this parameter is set nor a default task list was specified at registration time then
* a fault is returned.
*
*
*
* The specified string must not start or end with whitespace. It must not contain a : (colon),
* / (slash), | (vertical bar), or any control characters (\u0000-\u001f |
* \u007f-\u009f). Also, it must not contain the literal string arn.
*
*
* @param taskList
* The name of the task list to be used for decision tasks of the child workflow execution.
*
* A task list for this workflow execution must be specified either as a default for the workflow type or
* through this parameter. If neither this parameter is set nor a default task list was specified at
* registration time then a fault is returned.
*
*
*
* The specified string must not start or end with whitespace. It must not contain a : (colon),
* / (slash), | (vertical bar), or any control characters (
* \u0000-\u001f | \u007f-\u009f). Also, it must not contain the literal string
* arn.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public StartChildWorkflowExecutionDecisionAttributes withTaskList(TaskList taskList) {
setTaskList(taskList);
return this;
}
/**
*
* A task priority that, if set, specifies the priority for a decision task of this workflow execution. This
* overrides the defaultTaskPriority specified when registering the workflow type. Valid values are integers that
* range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647).
* Higher numbers indicate higher priority.
*
*
* For more information about setting task priority, see Setting Task
* Priority in the Amazon SWF Developer Guide.
*
*
* @param taskPriority
* A task priority that, if set, specifies the priority for a decision task of this workflow execution. This
* overrides the defaultTaskPriority specified when registering the workflow type. Valid values are integers
* that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE
* (2147483647). Higher numbers indicate higher priority.
*
* For more information about setting task priority, see Setting Task
* Priority in the Amazon SWF Developer Guide.
*/
public void setTaskPriority(String taskPriority) {
this.taskPriority = taskPriority;
}
/**
*
* A task priority that, if set, specifies the priority for a decision task of this workflow execution. This
* overrides the defaultTaskPriority specified when registering the workflow type. Valid values are integers that
* range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647).
* Higher numbers indicate higher priority.
*
*
* For more information about setting task priority, see Setting Task
* Priority in the Amazon SWF Developer Guide.
*
*
* @return A task priority that, if set, specifies the priority for a decision task of this workflow execution. This
* overrides the defaultTaskPriority specified when registering the workflow type. Valid values are integers
* that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE
* (2147483647). Higher numbers indicate higher priority.
*
* For more information about setting task priority, see Setting Task
* Priority in the Amazon SWF Developer Guide.
*/
public String getTaskPriority() {
return this.taskPriority;
}
/**
*
* A task priority that, if set, specifies the priority for a decision task of this workflow execution. This
* overrides the defaultTaskPriority specified when registering the workflow type. Valid values are integers that
* range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647).
* Higher numbers indicate higher priority.
*
*
* For more information about setting task priority, see Setting Task
* Priority in the Amazon SWF Developer Guide.
*
*
* @param taskPriority
* A task priority that, if set, specifies the priority for a decision task of this workflow execution. This
* overrides the defaultTaskPriority specified when registering the workflow type. Valid values are integers
* that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE
* (2147483647). Higher numbers indicate higher priority.
*
* For more information about setting task priority, see Setting Task
* Priority in the Amazon SWF Developer Guide.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public StartChildWorkflowExecutionDecisionAttributes withTaskPriority(String taskPriority) {
setTaskPriority(taskPriority);
return this;
}
/**
*
* Specifies the maximum duration of decision tasks for this workflow execution. This parameter overrides the
* defaultTaskStartToCloseTimout specified when registering the workflow type using
* RegisterWorkflowType.
*
*
* The duration is specified in seconds, an integer greater than or equal to 0. You can use
* NONE to specify unlimited duration.
*
*
*
* A task start-to-close timeout for this workflow execution must be specified either as a default for the workflow
* type or through this parameter. If neither this parameter is set nor a default task start-to-close timeout was
* specified at registration time then a fault is returned.
*
*
*
* @param taskStartToCloseTimeout
* Specifies the maximum duration of decision tasks for this workflow execution. This parameter overrides the
* defaultTaskStartToCloseTimout specified when registering the workflow type using
* RegisterWorkflowType.
*
* The duration is specified in seconds, an integer greater than or equal to 0. You can use
* NONE to specify unlimited duration.
*
*
*
* A task start-to-close timeout for this workflow execution must be specified either as a default for the
* workflow type or through this parameter. If neither this parameter is set nor a default task
* start-to-close timeout was specified at registration time then a fault is returned.
*
*/
public void setTaskStartToCloseTimeout(String taskStartToCloseTimeout) {
this.taskStartToCloseTimeout = taskStartToCloseTimeout;
}
/**
*
* Specifies the maximum duration of decision tasks for this workflow execution. This parameter overrides the
* defaultTaskStartToCloseTimout specified when registering the workflow type using
* RegisterWorkflowType.
*
*
* The duration is specified in seconds, an integer greater than or equal to 0. You can use
* NONE to specify unlimited duration.
*
*
*
* A task start-to-close timeout for this workflow execution must be specified either as a default for the workflow
* type or through this parameter. If neither this parameter is set nor a default task start-to-close timeout was
* specified at registration time then a fault is returned.
*
*
*
* @return Specifies the maximum duration of decision tasks for this workflow execution. This parameter overrides
* the defaultTaskStartToCloseTimout specified when registering the workflow type using
* RegisterWorkflowType.
*
* The duration is specified in seconds, an integer greater than or equal to 0. You can use
* NONE to specify unlimited duration.
*
*
*
* A task start-to-close timeout for this workflow execution must be specified either as a default for the
* workflow type or through this parameter. If neither this parameter is set nor a default task
* start-to-close timeout was specified at registration time then a fault is returned.
*
*/
public String getTaskStartToCloseTimeout() {
return this.taskStartToCloseTimeout;
}
/**
*
* Specifies the maximum duration of decision tasks for this workflow execution. This parameter overrides the
* defaultTaskStartToCloseTimout specified when registering the workflow type using
* RegisterWorkflowType.
*
*
* The duration is specified in seconds, an integer greater than or equal to 0. You can use
* NONE to specify unlimited duration.
*
*
*
* A task start-to-close timeout for this workflow execution must be specified either as a default for the workflow
* type or through this parameter. If neither this parameter is set nor a default task start-to-close timeout was
* specified at registration time then a fault is returned.
*
*
*
* @param taskStartToCloseTimeout
* Specifies the maximum duration of decision tasks for this workflow execution. This parameter overrides the
* defaultTaskStartToCloseTimout specified when registering the workflow type using
* RegisterWorkflowType.
*
* The duration is specified in seconds, an integer greater than or equal to 0. You can use
* NONE to specify unlimited duration.
*
*
*
* A task start-to-close timeout for this workflow execution must be specified either as a default for the
* workflow type or through this parameter. If neither this parameter is set nor a default task
* start-to-close timeout was specified at registration time then a fault is returned.
*
* @return Returns a reference to this object so that method calls can be chained together.
*/
public StartChildWorkflowExecutionDecisionAttributes withTaskStartToCloseTimeout(String taskStartToCloseTimeout) {
setTaskStartToCloseTimeout(taskStartToCloseTimeout);
return this;
}
/**
*
* If set, specifies the policy to use for the child workflow executions if the workflow execution being started is
* terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This
* policy overrides the default child policy specified when registering the workflow type using
* RegisterWorkflowType.
*
*
* The supported child policies are:
*
*
* -
*
* TERMINATE – The child executions are terminated.
*
*
* -
*
* REQUEST_CANCEL – A request to cancel is attempted for each child execution by recording a
* WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate
* actions when it receives an execution history with this event.
*
*
* -
*
* ABANDON – No action is taken. The child executions continue to run.
*
*
*
*
*
* A child policy for this workflow execution must be specified either as a default for the workflow type or through
* this parameter. If neither this parameter is set nor a default child policy was specified at registration time
* then a fault is returned.
*
*
*
* @param childPolicy
* If set, specifies the policy to use for the child workflow executions if the workflow execution being
* started is terminated by calling the TerminateWorkflowExecution action explicitly or due to an
* expired timeout. This policy overrides the default child policy specified when registering the workflow
* type using RegisterWorkflowType.
*
* The supported child policies are:
*
*
* -
*
* TERMINATE – The child executions are terminated.
*
*
* -
*
* REQUEST_CANCEL – A request to cancel is attempted for each child execution by recording a
* WorkflowExecutionCancelRequested event in its history. It is up to the decider to take
* appropriate actions when it receives an execution history with this event.
*
*
* -
*
* ABANDON – No action is taken. The child executions continue to run.
*
*
*
*
*
* A child policy for this workflow execution must be specified either as a default for the workflow type or
* through this parameter. If neither this parameter is set nor a default child policy was specified at
* registration time then a fault is returned.
*
* @see ChildPolicy
*/
public void setChildPolicy(String childPolicy) {
this.childPolicy = childPolicy;
}
/**
*
* If set, specifies the policy to use for the child workflow executions if the workflow execution being started is
* terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This
* policy overrides the default child policy specified when registering the workflow type using
* RegisterWorkflowType.
*
*
* The supported child policies are:
*
*
* -
*
* TERMINATE – The child executions are terminated.
*
*
* -
*
* REQUEST_CANCEL – A request to cancel is attempted for each child execution by recording a
* WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate
* actions when it receives an execution history with this event.
*
*
* -
*
* ABANDON – No action is taken. The child executions continue to run.
*
*
*
*
*
* A child policy for this workflow execution must be specified either as a default for the workflow type or through
* this parameter. If neither this parameter is set nor a default child policy was specified at registration time
* then a fault is returned.
*
*
*
* @return If set, specifies the policy to use for the child workflow executions if the workflow execution being
* started is terminated by calling the TerminateWorkflowExecution action explicitly or due to an
* expired timeout. This policy overrides the default child policy specified when registering the workflow
* type using RegisterWorkflowType.
*
* The supported child policies are:
*
*
* -
*
* TERMINATE – The child executions are terminated.
*
*
* -
*
* REQUEST_CANCEL – A request to cancel is attempted for each child execution by recording a
* WorkflowExecutionCancelRequested event in its history. It is up to the decider to take
* appropriate actions when it receives an execution history with this event.
*
*
* -
*
* ABANDON – No action is taken. The child executions continue to run.
*
*
*
*
*
* A child policy for this workflow execution must be specified either as a default for the workflow type or
* through this parameter. If neither this parameter is set nor a default child policy was specified at
* registration time then a fault is returned.
*
* @see ChildPolicy
*/
public String getChildPolicy() {
return this.childPolicy;
}
/**
*
* If set, specifies the policy to use for the child workflow executions if the workflow execution being started is
* terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This
* policy overrides the default child policy specified when registering the workflow type using
* RegisterWorkflowType.
*
*
* The supported child policies are:
*
*
* -
*
* TERMINATE – The child executions are terminated.
*
*
* -
*
* REQUEST_CANCEL – A request to cancel is attempted for each child execution by recording a
* WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate
* actions when it receives an execution history with this event.
*
*
* -
*
* ABANDON – No action is taken. The child executions continue to run.
*
*
*
*
*
* A child policy for this workflow execution must be specified either as a default for the workflow type or through
* this parameter. If neither this parameter is set nor a default child policy was specified at registration time
* then a fault is returned.
*
*
*
* @param childPolicy
* If set, specifies the policy to use for the child workflow executions if the workflow execution being
* started is terminated by calling the TerminateWorkflowExecution action explicitly or due to an
* expired timeout. This policy overrides the default child policy specified when registering the workflow
* type using RegisterWorkflowType.
*
* The supported child policies are:
*
*
* -
*
* TERMINATE – The child executions are terminated.
*
*
* -
*
* REQUEST_CANCEL – A request to cancel is attempted for each child execution by recording a
* WorkflowExecutionCancelRequested event in its history. It is up to the decider to take
* appropriate actions when it receives an execution history with this event.
*
*
* -
*
* ABANDON – No action is taken. The child executions continue to run.
*
*
*
*
*
* A child policy for this workflow execution must be specified either as a default for the workflow type or
* through this parameter. If neither this parameter is set nor a default child policy was specified at
* registration time then a fault is returned.
*
* @return Returns a reference to this object so that method calls can be chained together.
* @see ChildPolicy
*/
public StartChildWorkflowExecutionDecisionAttributes withChildPolicy(String childPolicy) {
setChildPolicy(childPolicy);
return this;
}
/**
*
* If set, specifies the policy to use for the child workflow executions if the workflow execution being started is
* terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This
* policy overrides the default child policy specified when registering the workflow type using
* RegisterWorkflowType.
*
*
* The supported child policies are:
*
*
* -
*
* TERMINATE – The child executions are terminated.
*
*
* -
*
* REQUEST_CANCEL – A request to cancel is attempted for each child execution by recording a
* WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate
* actions when it receives an execution history with this event.
*
*
* -
*
* ABANDON – No action is taken. The child executions continue to run.
*
*
*
*
*
* A child policy for this workflow execution must be specified either as a default for the workflow type or through
* this parameter. If neither this parameter is set nor a default child policy was specified at registration time
* then a fault is returned.
*
*
*
* @param childPolicy
* If set, specifies the policy to use for the child workflow executions if the workflow execution being
* started is terminated by calling the TerminateWorkflowExecution action explicitly or due to an
* expired timeout. This policy overrides the default child policy specified when registering the workflow
* type using RegisterWorkflowType.
*
* The supported child policies are:
*
*
* -
*
* TERMINATE – The child executions are terminated.
*
*
* -
*
* REQUEST_CANCEL – A request to cancel is attempted for each child execution by recording a
* WorkflowExecutionCancelRequested event in its history. It is up to the decider to take
* appropriate actions when it receives an execution history with this event.
*
*
* -
*
* ABANDON – No action is taken. The child executions continue to run.
*
*
*
*
*
* A child policy for this workflow execution must be specified either as a default for the workflow type or
* through this parameter. If neither this parameter is set nor a default child policy was specified at
* registration time then a fault is returned.
*
* @see ChildPolicy
*/
public void setChildPolicy(ChildPolicy childPolicy) {
withChildPolicy(childPolicy);
}
/**
*
* If set, specifies the policy to use for the child workflow executions if the workflow execution being started is
* terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This
* policy overrides the default child policy specified when registering the workflow type using
* RegisterWorkflowType.
*
*
* The supported child policies are:
*
*
* -
*
* TERMINATE – The child executions are terminated.
*
*
* -
*
* REQUEST_CANCEL – A request to cancel is attempted for each child execution by recording a
* WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate
* actions when it receives an execution history with this event.
*
*
* -
*
* ABANDON – No action is taken. The child executions continue to run.
*
*
*
*
*
* A child policy for this workflow execution must be specified either as a default for the workflow type or through
* this parameter. If neither this parameter is set nor a default child policy was specified at registration time
* then a fault is returned.
*
*
*
* @param childPolicy
* If set, specifies the policy to use for the child workflow executions if the workflow execution being
* started is terminated by calling the TerminateWorkflowExecution action explicitly or due to an
* expired timeout. This policy overrides the default child policy specified when registering the workflow
* type using RegisterWorkflowType.
*
* The supported child policies are:
*
*
* -
*
* TERMINATE – The child executions are terminated.
*
*
* -
*
* REQUEST_CANCEL – A request to cancel is attempted for each child execution by recording a
* WorkflowExecutionCancelRequested event in its history. It is up to the decider to take
* appropriate actions when it receives an execution history with this event.
*
*
* -
*
* ABANDON – No action is taken. The child executions continue to run.
*
*
*
*
*
* A child policy for this workflow execution must be specified either as a default for the workflow type or
* through this parameter. If neither this parameter is set nor a default child policy was specified at
* registration time then a fault is returned.
*
* @return Returns a reference to this object so that method calls can be chained together.
* @see ChildPolicy
*/
public StartChildWorkflowExecutionDecisionAttributes withChildPolicy(ChildPolicy childPolicy) {
this.childPolicy = childPolicy.toString();
return this;
}
/**
*
* The list of tags to associate with the child workflow execution. A maximum of 5 tags can be specified. You can
* list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or
* ListClosedWorkflowExecutions and specifying a TagFilter.
*
*
* @return The list of tags to associate with the child workflow execution. A maximum of 5 tags can be specified.
* You can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or
* ListClosedWorkflowExecutions and specifying a TagFilter.
*/
public java.util.List getTagList() {
return tagList;
}
/**
*
* The list of tags to associate with the child workflow execution. A maximum of 5 tags can be specified. You can
* list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or
* ListClosedWorkflowExecutions and specifying a TagFilter.
*
*
* @param tagList
* The list of tags to associate with the child workflow execution. A maximum of 5 tags can be specified. You
* can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or
* ListClosedWorkflowExecutions and specifying a TagFilter.
*/
public void setTagList(java.util.Collection tagList) {
if (tagList == null) {
this.tagList = null;
return;
}
this.tagList = new java.util.ArrayList(tagList);
}
/**
*
* The list of tags to associate with the child workflow execution. A maximum of 5 tags can be specified. You can
* list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or
* ListClosedWorkflowExecutions and specifying a TagFilter.
*
*
* NOTE: This method appends the values to the existing list (if any). Use
* {@link #setTagList(java.util.Collection)} or {@link #withTagList(java.util.Collection)} if you want to override
* the existing values.
*
*
* @param tagList
* The list of tags to associate with the child workflow execution. A maximum of 5 tags can be specified. You
* can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or
* ListClosedWorkflowExecutions and specifying a TagFilter.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public StartChildWorkflowExecutionDecisionAttributes withTagList(String... tagList) {
if (this.tagList == null) {
setTagList(new java.util.ArrayList(tagList.length));
}
for (String ele : tagList) {
this.tagList.add(ele);
}
return this;
}
/**
*
* The list of tags to associate with the child workflow execution. A maximum of 5 tags can be specified. You can
* list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or
* ListClosedWorkflowExecutions and specifying a TagFilter.
*
*
* @param tagList
* The list of tags to associate with the child workflow execution. A maximum of 5 tags can be specified. You
* can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or
* ListClosedWorkflowExecutions and specifying a TagFilter.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public StartChildWorkflowExecutionDecisionAttributes withTagList(java.util.Collection tagList) {
setTagList(tagList);
return this;
}
/**
*
* The IAM role attached to the child workflow execution.
*
*
* @param lambdaRole
* The IAM role attached to the child workflow execution.
*/
public void setLambdaRole(String lambdaRole) {
this.lambdaRole = lambdaRole;
}
/**
*
* The IAM role attached to the child workflow execution.
*
*
* @return The IAM role attached to the child workflow execution.
*/
public String getLambdaRole() {
return this.lambdaRole;
}
/**
*
* The IAM role attached to the child workflow execution.
*
*
* @param lambdaRole
* The IAM role attached to the child workflow execution.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public StartChildWorkflowExecutionDecisionAttributes withLambdaRole(String lambdaRole) {
setLambdaRole(lambdaRole);
return this;
}
/**
* Returns a string representation of this object; useful for testing and debugging.
*
* @return A string representation of this object.
*
* @see java.lang.Object#toString()
*/
@Override
public String toString() {
StringBuilder sb = new StringBuilder();
sb.append("{");
if (getWorkflowType() != null)
sb.append("WorkflowType: ").append(getWorkflowType()).append(",");
if (getWorkflowId() != null)
sb.append("WorkflowId: ").append(getWorkflowId()).append(",");
if (getControl() != null)
sb.append("Control: ").append(getControl()).append(",");
if (getInput() != null)
sb.append("Input: ").append(getInput()).append(",");
if (getExecutionStartToCloseTimeout() != null)
sb.append("ExecutionStartToCloseTimeout: ").append(getExecutionStartToCloseTimeout()).append(",");
if (getTaskList() != null)
sb.append("TaskList: ").append(getTaskList()).append(",");
if (getTaskPriority() != null)
sb.append("TaskPriority: ").append(getTaskPriority()).append(",");
if (getTaskStartToCloseTimeout() != null)
sb.append("TaskStartToCloseTimeout: ").append(getTaskStartToCloseTimeout()).append(",");
if (getChildPolicy() != null)
sb.append("ChildPolicy: ").append(getChildPolicy()).append(",");
if (getTagList() != null)
sb.append("TagList: ").append(getTagList()).append(",");
if (getLambdaRole() != null)
sb.append("LambdaRole: ").append(getLambdaRole());
sb.append("}");
return sb.toString();
}
@Override
public boolean equals(Object obj) {
if (this == obj)
return true;
if (obj == null)
return false;
if (obj instanceof StartChildWorkflowExecutionDecisionAttributes == false)
return false;
StartChildWorkflowExecutionDecisionAttributes other = (StartChildWorkflowExecutionDecisionAttributes) obj;
if (other.getWorkflowType() == null ^ this.getWorkflowType() == null)
return false;
if (other.getWorkflowType() != null && other.getWorkflowType().equals(this.getWorkflowType()) == false)
return false;
if (other.getWorkflowId() == null ^ this.getWorkflowId() == null)
return false;
if (other.getWorkflowId() != null && other.getWorkflowId().equals(this.getWorkflowId()) == false)
return false;
if (other.getControl() == null ^ this.getControl() == null)
return false;
if (other.getControl() != null && other.getControl().equals(this.getControl()) == false)
return false;
if (other.getInput() == null ^ this.getInput() == null)
return false;
if (other.getInput() != null && other.getInput().equals(this.getInput()) == false)
return false;
if (other.getExecutionStartToCloseTimeout() == null ^ this.getExecutionStartToCloseTimeout() == null)
return false;
if (other.getExecutionStartToCloseTimeout() != null && other.getExecutionStartToCloseTimeout().equals(this.getExecutionStartToCloseTimeout()) == false)
return false;
if (other.getTaskList() == null ^ this.getTaskList() == null)
return false;
if (other.getTaskList() != null && other.getTaskList().equals(this.getTaskList()) == false)
return false;
if (other.getTaskPriority() == null ^ this.getTaskPriority() == null)
return false;
if (other.getTaskPriority() != null && other.getTaskPriority().equals(this.getTaskPriority()) == false)
return false;
if (other.getTaskStartToCloseTimeout() == null ^ this.getTaskStartToCloseTimeout() == null)
return false;
if (other.getTaskStartToCloseTimeout() != null && other.getTaskStartToCloseTimeout().equals(this.getTaskStartToCloseTimeout()) == false)
return false;
if (other.getChildPolicy() == null ^ this.getChildPolicy() == null)
return false;
if (other.getChildPolicy() != null && other.getChildPolicy().equals(this.getChildPolicy()) == false)
return false;
if (other.getTagList() == null ^ this.getTagList() == null)
return false;
if (other.getTagList() != null && other.getTagList().equals(this.getTagList()) == false)
return false;
if (other.getLambdaRole() == null ^ this.getLambdaRole() == null)
return false;
if (other.getLambdaRole() != null && other.getLambdaRole().equals(this.getLambdaRole()) == false)
return false;
return true;
}
@Override
public int hashCode() {
final int prime = 31;
int hashCode = 1;
hashCode = prime * hashCode + ((getWorkflowType() == null) ? 0 : getWorkflowType().hashCode());
hashCode = prime * hashCode + ((getWorkflowId() == null) ? 0 : getWorkflowId().hashCode());
hashCode = prime * hashCode + ((getControl() == null) ? 0 : getControl().hashCode());
hashCode = prime * hashCode + ((getInput() == null) ? 0 : getInput().hashCode());
hashCode = prime * hashCode + ((getExecutionStartToCloseTimeout() == null) ? 0 : getExecutionStartToCloseTimeout().hashCode());
hashCode = prime * hashCode + ((getTaskList() == null) ? 0 : getTaskList().hashCode());
hashCode = prime * hashCode + ((getTaskPriority() == null) ? 0 : getTaskPriority().hashCode());
hashCode = prime * hashCode + ((getTaskStartToCloseTimeout() == null) ? 0 : getTaskStartToCloseTimeout().hashCode());
hashCode = prime * hashCode + ((getChildPolicy() == null) ? 0 : getChildPolicy().hashCode());
hashCode = prime * hashCode + ((getTagList() == null) ? 0 : getTagList().hashCode());
hashCode = prime * hashCode + ((getLambdaRole() == null) ? 0 : getLambdaRole().hashCode());
return hashCode;
}
@Override
public StartChildWorkflowExecutionDecisionAttributes clone() {
try {
return (StartChildWorkflowExecutionDecisionAttributes) super.clone();
} catch (CloneNotSupportedException e) {
throw new IllegalStateException("Got a CloneNotSupportedException from Object.clone() " + "even though we're Cloneable!", e);
}
}
@com.amazonaws.annotation.SdkInternalApi
@Override
public void marshall(ProtocolMarshaller protocolMarshaller) {
com.amazonaws.services.simpleworkflow.model.transform.StartChildWorkflowExecutionDecisionAttributesMarshaller.getInstance().marshall(this,
protocolMarshaller);
}
}