com.amazonaws.services.sqs.model.SendMessageBatchRequestEntry Maven / Gradle / Ivy
Show all versions of aws-java-sdk-sqs Show documentation
/*
* Copyright 2019-2024 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with
* the License. A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions
* and limitations under the License.
*/
package com.amazonaws.services.sqs.model;
import java.io.Serializable;
import javax.annotation.Generated;
import com.amazonaws.protocol.StructuredPojo;
import com.amazonaws.protocol.ProtocolMarshaller;
/**
*
* Contains the details of a single Amazon SQS message along with an Id.
*
*
* @see AWS
* API Documentation
*/
@Generated("com.amazonaws:aws-java-sdk-code-generator")
public class SendMessageBatchRequestEntry implements Serializable, Cloneable, StructuredPojo {
/**
*
* An identifier for a message in this batch used to communicate the result.
*
*
*
* The Ids of a batch request need to be unique within a request.
*
*
* This identifier can have up to 80 characters. The following characters are accepted: alphanumeric characters,
* hyphens(-), and underscores (_).
*
*
*/
private String id;
/**
*
* The body of the message.
*
*/
private String messageBody;
/**
*
* The length of time, in seconds, for which a specific message is delayed. Valid values: 0 to 900. Maximum: 15
* minutes. Messages with a positive DelaySeconds value become available for processing after the delay
* period is finished. If you don't specify a value, the default value for the queue is applied.
*
*
*
* When you set FifoQueue, you can't set DelaySeconds per message. You can set this
* parameter only on a queue level.
*
*
*/
private Integer delaySeconds;
/**
*
* Each message attribute consists of a Name, Type, and Value. For more
* information, see Amazon SQS message attributes in the Amazon SQS Developer Guide.
*
*/
private com.amazonaws.internal.SdkInternalMap messageAttributes;
/**
*
* The message system attribute to send Each message system attribute consists of a Name,
* Type, and Value.
*
*
*
* -
*
* Currently, the only supported message system attribute is AWSTraceHeader. Its type must be
* String and its value must be a correctly formatted X-Ray trace header string.
*
*
* -
*
* The size of a message system attribute doesn't count towards the total size of a message.
*
*
*
*
*/
private com.amazonaws.internal.SdkInternalMap messageSystemAttributes;
/**
*
* This parameter applies only to FIFO (first-in-first-out) queues.
*
*
* The token used for deduplication of messages within a 5-minute minimum deduplication interval. If a message with
* a particular MessageDeduplicationId is sent successfully, subsequent messages with the same
* MessageDeduplicationId are accepted successfully but aren't delivered. For more information, see Exactly-once processing in the Amazon SQS Developer Guide.
*
*
* -
*
* Every message must have a unique MessageDeduplicationId,
*
*
* -
*
* You may provide a MessageDeduplicationId explicitly.
*
*
* -
*
* If you aren't able to provide a MessageDeduplicationId and you enable
* ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the
* MessageDeduplicationId using the body of the message (but not the attributes of the message).
*
*
* -
*
* If you don't provide a MessageDeduplicationId and the queue doesn't have
* ContentBasedDeduplication set, the action fails with an error.
*
*
* -
*
* If the queue has ContentBasedDeduplication set, your MessageDeduplicationId overrides
* the generated one.
*
*
*
*
* -
*
* When ContentBasedDeduplication is in effect, messages with identical content sent within the
* deduplication interval are treated as duplicates and only one copy of the message is delivered.
*
*
* -
*
* If you send one message with ContentBasedDeduplication enabled and then another message with a
* MessageDeduplicationId that is the same as the one generated for the first
* MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message
* is delivered.
*
*
*
*
*
* The MessageDeduplicationId is available to the consumer of the message (this can be useful for
* troubleshooting delivery issues).
*
*
* If a message is sent successfully but the acknowledgement is lost and the message is resent with the same
* MessageDeduplicationId after the deduplication interval, Amazon SQS can't detect duplicate messages.
*
*
* Amazon SQS continues to keep track of the message deduplication ID even after the message is received and
* deleted.
*
*
*
* The length of MessageDeduplicationId is 128 characters. MessageDeduplicationId can
* contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation (
* !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).
*
*
* For best practices of using MessageDeduplicationId, see Using the MessageDeduplicationId Property in the Amazon SQS Developer Guide.
*
*/
private String messageDeduplicationId;
/**
*
* This parameter applies only to FIFO (first-in-first-out) queues.
*
*
* The tag that specifies that a message belongs to a specific message group. Messages that belong to the same
* message group are processed in a FIFO manner (however, messages in different message groups might be processed
* out of order). To interleave multiple ordered streams within a single queue, use MessageGroupId
* values (for example, session data for multiple users). In this scenario, multiple consumers can process the
* queue, but the session data of each user is processed in a FIFO fashion.
*
*
* -
*
* You must associate a non-empty MessageGroupId with a message. If you don't provide a
* MessageGroupId, the action fails.
*
*
* -
*
* ReceiveMessage might return messages with multiple MessageGroupId values. For each
* MessageGroupId, the messages are sorted by time sent. The caller can't specify a
* MessageGroupId.
*
*
*
*
* The length of MessageGroupId is 128 characters. Valid values: alphanumeric characters and
* punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).
*
*
* For best practices of using MessageGroupId, see Using the MessageGroupId Property in the Amazon SQS Developer Guide.
*
*
*
* MessageGroupId is required for FIFO queues. You can't use it for Standard queues.
*
*
*/
private String messageGroupId;
/**
* Default constructor for SendMessageBatchRequestEntry object. Callers should use the setter or fluent setter
* (with...) methods to initialize the object after creating it.
*/
public SendMessageBatchRequestEntry() {
}
/**
* Constructs a new SendMessageBatchRequestEntry object. Callers should use the setter or fluent setter (with...)
* methods to initialize any additional object members.
*
* @param id
* An identifier for a message in this batch used to communicate the result.
*
* The Ids of a batch request need to be unique within a request.
*
*
* This identifier can have up to 80 characters. The following characters are accepted: alphanumeric
* characters, hyphens(-), and underscores (_).
*
* @param messageBody
* The body of the message.
*/
public SendMessageBatchRequestEntry(String id, String messageBody) {
setId(id);
setMessageBody(messageBody);
}
/**
*
* An identifier for a message in this batch used to communicate the result.
*
*
*
* The Ids of a batch request need to be unique within a request.
*
*
* This identifier can have up to 80 characters. The following characters are accepted: alphanumeric characters,
* hyphens(-), and underscores (_).
*
*
*
* @param id
* An identifier for a message in this batch used to communicate the result.
*
* The Ids of a batch request need to be unique within a request.
*
*
* This identifier can have up to 80 characters. The following characters are accepted: alphanumeric
* characters, hyphens(-), and underscores (_).
*
*/
public void setId(String id) {
this.id = id;
}
/**
*
* An identifier for a message in this batch used to communicate the result.
*
*
*
* The Ids of a batch request need to be unique within a request.
*
*
* This identifier can have up to 80 characters. The following characters are accepted: alphanumeric characters,
* hyphens(-), and underscores (_).
*
*
*
* @return An identifier for a message in this batch used to communicate the result.
*
* The Ids of a batch request need to be unique within a request.
*
*
* This identifier can have up to 80 characters. The following characters are accepted: alphanumeric
* characters, hyphens(-), and underscores (_).
*
*/
public String getId() {
return this.id;
}
/**
*
* An identifier for a message in this batch used to communicate the result.
*
*
*
* The Ids of a batch request need to be unique within a request.
*
*
* This identifier can have up to 80 characters. The following characters are accepted: alphanumeric characters,
* hyphens(-), and underscores (_).
*
*
*
* @param id
* An identifier for a message in this batch used to communicate the result.
*
* The Ids of a batch request need to be unique within a request.
*
*
* This identifier can have up to 80 characters. The following characters are accepted: alphanumeric
* characters, hyphens(-), and underscores (_).
*
* @return Returns a reference to this object so that method calls can be chained together.
*/
public SendMessageBatchRequestEntry withId(String id) {
setId(id);
return this;
}
/**
*
* The body of the message.
*
*
* @param messageBody
* The body of the message.
*/
public void setMessageBody(String messageBody) {
this.messageBody = messageBody;
}
/**
*
* The body of the message.
*
*
* @return The body of the message.
*/
public String getMessageBody() {
return this.messageBody;
}
/**
*
* The body of the message.
*
*
* @param messageBody
* The body of the message.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public SendMessageBatchRequestEntry withMessageBody(String messageBody) {
setMessageBody(messageBody);
return this;
}
/**
*
* The length of time, in seconds, for which a specific message is delayed. Valid values: 0 to 900. Maximum: 15
* minutes. Messages with a positive DelaySeconds value become available for processing after the delay
* period is finished. If you don't specify a value, the default value for the queue is applied.
*
*
*
* When you set FifoQueue, you can't set DelaySeconds per message. You can set this
* parameter only on a queue level.
*
*
*
* @param delaySeconds
* The length of time, in seconds, for which a specific message is delayed. Valid values: 0 to 900. Maximum:
* 15 minutes. Messages with a positive DelaySeconds value become available for processing after
* the delay period is finished. If you don't specify a value, the default value for the queue is applied.
*
*
* When you set FifoQueue, you can't set DelaySeconds per message. You can set this
* parameter only on a queue level.
*
*/
public void setDelaySeconds(Integer delaySeconds) {
this.delaySeconds = delaySeconds;
}
/**
*
* The length of time, in seconds, for which a specific message is delayed. Valid values: 0 to 900. Maximum: 15
* minutes. Messages with a positive DelaySeconds value become available for processing after the delay
* period is finished. If you don't specify a value, the default value for the queue is applied.
*
*
*
* When you set FifoQueue, you can't set DelaySeconds per message. You can set this
* parameter only on a queue level.
*
*
*
* @return The length of time, in seconds, for which a specific message is delayed. Valid values: 0 to 900. Maximum:
* 15 minutes. Messages with a positive DelaySeconds value become available for processing
* after the delay period is finished. If you don't specify a value, the default value for the queue is
* applied.
*
* When you set FifoQueue, you can't set DelaySeconds per message. You can set
* this parameter only on a queue level.
*
*/
public Integer getDelaySeconds() {
return this.delaySeconds;
}
/**
*
* The length of time, in seconds, for which a specific message is delayed. Valid values: 0 to 900. Maximum: 15
* minutes. Messages with a positive DelaySeconds value become available for processing after the delay
* period is finished. If you don't specify a value, the default value for the queue is applied.
*
*
*
* When you set FifoQueue, you can't set DelaySeconds per message. You can set this
* parameter only on a queue level.
*
*
*
* @param delaySeconds
* The length of time, in seconds, for which a specific message is delayed. Valid values: 0 to 900. Maximum:
* 15 minutes. Messages with a positive DelaySeconds value become available for processing after
* the delay period is finished. If you don't specify a value, the default value for the queue is applied.
*
*
* When you set FifoQueue, you can't set DelaySeconds per message. You can set this
* parameter only on a queue level.
*
* @return Returns a reference to this object so that method calls can be chained together.
*/
public SendMessageBatchRequestEntry withDelaySeconds(Integer delaySeconds) {
setDelaySeconds(delaySeconds);
return this;
}
/**
*
* Each message attribute consists of a Name, Type, and Value. For more
* information, see Amazon SQS message attributes in the Amazon SQS Developer Guide.
*
*
* @return Each message attribute consists of a Name, Type, and Value. For
* more information, see Amazon SQS message attributes in the Amazon SQS Developer Guide.
*/
public java.util.Map getMessageAttributes() {
if (messageAttributes == null) {
messageAttributes = new com.amazonaws.internal.SdkInternalMap();
}
return messageAttributes;
}
/**
*
* Each message attribute consists of a Name, Type, and Value. For more
* information, see Amazon SQS message attributes in the Amazon SQS Developer Guide.
*
*
* @param messageAttributes
* Each message attribute consists of a Name, Type, and Value. For
* more information, see Amazon SQS message attributes in the Amazon SQS Developer Guide.
*/
public void setMessageAttributes(java.util.Map messageAttributes) {
this.messageAttributes = messageAttributes == null ? null : new com.amazonaws.internal.SdkInternalMap(messageAttributes);
}
/**
*
* Each message attribute consists of a Name, Type, and Value. For more
* information, see Amazon SQS message attributes in the Amazon SQS Developer Guide.
*
*
* @param messageAttributes
* Each message attribute consists of a Name, Type, and Value. For
* more information, see Amazon SQS message attributes in the Amazon SQS Developer Guide.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public SendMessageBatchRequestEntry withMessageAttributes(java.util.Map messageAttributes) {
setMessageAttributes(messageAttributes);
return this;
}
/**
* Add a single MessageAttributes entry
*
* @see SendMessageBatchRequestEntry#withMessageAttributes
* @returns a reference to this object so that method calls can be chained together.
*/
public SendMessageBatchRequestEntry addMessageAttributesEntry(String key, MessageAttributeValue value) {
if (null == this.messageAttributes) {
this.messageAttributes = new com.amazonaws.internal.SdkInternalMap();
}
if (this.messageAttributes.containsKey(key))
throw new IllegalArgumentException("Duplicated keys (" + key.toString() + ") are provided.");
this.messageAttributes.put(key, value);
return this;
}
/**
* Removes all the entries added into MessageAttributes.
*
* @return Returns a reference to this object so that method calls can be chained together.
*/
public SendMessageBatchRequestEntry clearMessageAttributesEntries() {
this.messageAttributes = null;
return this;
}
/**
*
* The message system attribute to send Each message system attribute consists of a Name,
* Type, and Value.
*
*
*
* -
*
* Currently, the only supported message system attribute is AWSTraceHeader. Its type must be
* String and its value must be a correctly formatted X-Ray trace header string.
*
*
* -
*
* The size of a message system attribute doesn't count towards the total size of a message.
*
*
*
*
*
* @return The message system attribute to send Each message system attribute consists of a Name,
* Type, and Value.
*
* -
*
* Currently, the only supported message system attribute is AWSTraceHeader. Its type must be
* String and its value must be a correctly formatted X-Ray trace header string.
*
*
* -
*
* The size of a message system attribute doesn't count towards the total size of a message.
*
*
*
*/
public java.util.Map getMessageSystemAttributes() {
if (messageSystemAttributes == null) {
messageSystemAttributes = new com.amazonaws.internal.SdkInternalMap();
}
return messageSystemAttributes;
}
/**
*
* The message system attribute to send Each message system attribute consists of a Name,
* Type, and Value.
*
*
*
* -
*
* Currently, the only supported message system attribute is AWSTraceHeader. Its type must be
* String and its value must be a correctly formatted X-Ray trace header string.
*
*
* -
*
* The size of a message system attribute doesn't count towards the total size of a message.
*
*
*
*
*
* @param messageSystemAttributes
* The message system attribute to send Each message system attribute consists of a Name,
* Type, and Value.
*
* -
*
* Currently, the only supported message system attribute is AWSTraceHeader. Its type must be
* String and its value must be a correctly formatted X-Ray trace header string.
*
*
* -
*
* The size of a message system attribute doesn't count towards the total size of a message.
*
*
*
*/
public void setMessageSystemAttributes(java.util.Map messageSystemAttributes) {
this.messageSystemAttributes = messageSystemAttributes == null ? null : new com.amazonaws.internal.SdkInternalMap(
messageSystemAttributes);
}
/**
*
* The message system attribute to send Each message system attribute consists of a Name,
* Type, and Value.
*
*
*
* -
*
* Currently, the only supported message system attribute is AWSTraceHeader. Its type must be
* String and its value must be a correctly formatted X-Ray trace header string.
*
*
* -
*
* The size of a message system attribute doesn't count towards the total size of a message.
*
*
*
*
*
* @param messageSystemAttributes
* The message system attribute to send Each message system attribute consists of a Name,
* Type, and Value.
*
* -
*
* Currently, the only supported message system attribute is AWSTraceHeader. Its type must be
* String and its value must be a correctly formatted X-Ray trace header string.
*
*
* -
*
* The size of a message system attribute doesn't count towards the total size of a message.
*
*
*
* @return Returns a reference to this object so that method calls can be chained together.
*/
public SendMessageBatchRequestEntry withMessageSystemAttributes(java.util.Map messageSystemAttributes) {
setMessageSystemAttributes(messageSystemAttributes);
return this;
}
/**
* Add a single MessageSystemAttributes entry
*
* @see SendMessageBatchRequestEntry#withMessageSystemAttributes
* @returns a reference to this object so that method calls can be chained together.
*/
public SendMessageBatchRequestEntry addMessageSystemAttributesEntry(String key, MessageSystemAttributeValue value) {
if (null == this.messageSystemAttributes) {
this.messageSystemAttributes = new com.amazonaws.internal.SdkInternalMap();
}
if (this.messageSystemAttributes.containsKey(key))
throw new IllegalArgumentException("Duplicated keys (" + key.toString() + ") are provided.");
this.messageSystemAttributes.put(key, value);
return this;
}
/**
* Removes all the entries added into MessageSystemAttributes.
*
* @return Returns a reference to this object so that method calls can be chained together.
*/
public SendMessageBatchRequestEntry clearMessageSystemAttributesEntries() {
this.messageSystemAttributes = null;
return this;
}
/**
*
* This parameter applies only to FIFO (first-in-first-out) queues.
*
*
* The token used for deduplication of messages within a 5-minute minimum deduplication interval. If a message with
* a particular MessageDeduplicationId is sent successfully, subsequent messages with the same
* MessageDeduplicationId are accepted successfully but aren't delivered. For more information, see Exactly-once processing in the Amazon SQS Developer Guide.
*
*
* -
*
* Every message must have a unique MessageDeduplicationId,
*
*
* -
*
* You may provide a MessageDeduplicationId explicitly.
*
*
* -
*
* If you aren't able to provide a MessageDeduplicationId and you enable
* ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the
* MessageDeduplicationId using the body of the message (but not the attributes of the message).
*
*
* -
*
* If you don't provide a MessageDeduplicationId and the queue doesn't have
* ContentBasedDeduplication set, the action fails with an error.
*
*
* -
*
* If the queue has ContentBasedDeduplication set, your MessageDeduplicationId overrides
* the generated one.
*
*
*
*
* -
*
* When ContentBasedDeduplication is in effect, messages with identical content sent within the
* deduplication interval are treated as duplicates and only one copy of the message is delivered.
*
*
* -
*
* If you send one message with ContentBasedDeduplication enabled and then another message with a
* MessageDeduplicationId that is the same as the one generated for the first
* MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message
* is delivered.
*
*
*
*
*
* The MessageDeduplicationId is available to the consumer of the message (this can be useful for
* troubleshooting delivery issues).
*
*
* If a message is sent successfully but the acknowledgement is lost and the message is resent with the same
* MessageDeduplicationId after the deduplication interval, Amazon SQS can't detect duplicate messages.
*
*
* Amazon SQS continues to keep track of the message deduplication ID even after the message is received and
* deleted.
*
*
*
* The length of MessageDeduplicationId is 128 characters. MessageDeduplicationId can
* contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation (
* !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).
*
*
* For best practices of using MessageDeduplicationId, see Using the MessageDeduplicationId Property in the Amazon SQS Developer Guide.
*
*
* @param messageDeduplicationId
* This parameter applies only to FIFO (first-in-first-out) queues.
*
* The token used for deduplication of messages within a 5-minute minimum deduplication interval. If a
* message with a particular MessageDeduplicationId is sent successfully, subsequent messages
* with the same MessageDeduplicationId are accepted successfully but aren't delivered. For more
* information, see Exactly-once processing in the Amazon SQS Developer Guide.
*
*
* -
*
* Every message must have a unique MessageDeduplicationId,
*
*
* -
*
* You may provide a MessageDeduplicationId explicitly.
*
*
* -
*
* If you aren't able to provide a MessageDeduplicationId and you enable
* ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the
* MessageDeduplicationId using the body of the message (but not the attributes of the message).
*
*
* -
*
* If you don't provide a MessageDeduplicationId and the queue doesn't have
* ContentBasedDeduplication set, the action fails with an error.
*
*
* -
*
* If the queue has ContentBasedDeduplication set, your MessageDeduplicationId
* overrides the generated one.
*
*
*
*
* -
*
* When ContentBasedDeduplication is in effect, messages with identical content sent within the
* deduplication interval are treated as duplicates and only one copy of the message is delivered.
*
*
* -
*
* If you send one message with ContentBasedDeduplication enabled and then another message with
* a MessageDeduplicationId that is the same as the one generated for the first
* MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the
* message is delivered.
*
*
*
*
*
* The MessageDeduplicationId is available to the consumer of the message (this can be useful
* for troubleshooting delivery issues).
*
*
* If a message is sent successfully but the acknowledgement is lost and the message is resent with the same
* MessageDeduplicationId after the deduplication interval, Amazon SQS can't detect duplicate
* messages.
*
*
* Amazon SQS continues to keep track of the message deduplication ID even after the message is received and
* deleted.
*
*
*
* The length of MessageDeduplicationId is 128 characters. MessageDeduplicationId
* can contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation
* (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).
*
*
* For best practices of using MessageDeduplicationId, see Using the MessageDeduplicationId Property in the Amazon SQS Developer Guide.
*/
public void setMessageDeduplicationId(String messageDeduplicationId) {
this.messageDeduplicationId = messageDeduplicationId;
}
/**
*
* This parameter applies only to FIFO (first-in-first-out) queues.
*
*
* The token used for deduplication of messages within a 5-minute minimum deduplication interval. If a message with
* a particular MessageDeduplicationId is sent successfully, subsequent messages with the same
* MessageDeduplicationId are accepted successfully but aren't delivered. For more information, see Exactly-once processing in the Amazon SQS Developer Guide.
*
*
* -
*
* Every message must have a unique MessageDeduplicationId,
*
*
* -
*
* You may provide a MessageDeduplicationId explicitly.
*
*
* -
*
* If you aren't able to provide a MessageDeduplicationId and you enable
* ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the
* MessageDeduplicationId using the body of the message (but not the attributes of the message).
*
*
* -
*
* If you don't provide a MessageDeduplicationId and the queue doesn't have
* ContentBasedDeduplication set, the action fails with an error.
*
*
* -
*
* If the queue has ContentBasedDeduplication set, your MessageDeduplicationId overrides
* the generated one.
*
*
*
*
* -
*
* When ContentBasedDeduplication is in effect, messages with identical content sent within the
* deduplication interval are treated as duplicates and only one copy of the message is delivered.
*
*
* -
*
* If you send one message with ContentBasedDeduplication enabled and then another message with a
* MessageDeduplicationId that is the same as the one generated for the first
* MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message
* is delivered.
*
*
*
*
*
* The MessageDeduplicationId is available to the consumer of the message (this can be useful for
* troubleshooting delivery issues).
*
*
* If a message is sent successfully but the acknowledgement is lost and the message is resent with the same
* MessageDeduplicationId after the deduplication interval, Amazon SQS can't detect duplicate messages.
*
*
* Amazon SQS continues to keep track of the message deduplication ID even after the message is received and
* deleted.
*
*
*
* The length of MessageDeduplicationId is 128 characters. MessageDeduplicationId can
* contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation (
* !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).
*
*
* For best practices of using MessageDeduplicationId, see Using the MessageDeduplicationId Property in the Amazon SQS Developer Guide.
*
*
* @return This parameter applies only to FIFO (first-in-first-out) queues.
*
* The token used for deduplication of messages within a 5-minute minimum deduplication interval. If a
* message with a particular MessageDeduplicationId is sent successfully, subsequent messages
* with the same MessageDeduplicationId are accepted successfully but aren't delivered. For
* more information, see Exactly-once processing in the Amazon SQS Developer Guide.
*
*
* -
*
* Every message must have a unique MessageDeduplicationId,
*
*
* -
*
* You may provide a MessageDeduplicationId explicitly.
*
*
* -
*
* If you aren't able to provide a MessageDeduplicationId and you enable
* ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the
* MessageDeduplicationId using the body of the message (but not the attributes of the
* message).
*
*
* -
*
* If you don't provide a MessageDeduplicationId and the queue doesn't have
* ContentBasedDeduplication set, the action fails with an error.
*
*
* -
*
* If the queue has ContentBasedDeduplication set, your MessageDeduplicationId
* overrides the generated one.
*
*
*
*
* -
*
* When ContentBasedDeduplication is in effect, messages with identical content sent within the
* deduplication interval are treated as duplicates and only one copy of the message is delivered.
*
*
* -
*
* If you send one message with ContentBasedDeduplication enabled and then another message with
* a MessageDeduplicationId that is the same as the one generated for the first
* MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the
* message is delivered.
*
*
*
*
*
* The MessageDeduplicationId is available to the consumer of the message (this can be useful
* for troubleshooting delivery issues).
*
*
* If a message is sent successfully but the acknowledgement is lost and the message is resent with the same
* MessageDeduplicationId after the deduplication interval, Amazon SQS can't detect duplicate
* messages.
*
*
* Amazon SQS continues to keep track of the message deduplication ID even after the message is received and
* deleted.
*
*
*
* The length of MessageDeduplicationId is 128 characters. MessageDeduplicationId
* can contain alphanumeric characters (a-z, A-Z, 0-9) and
* punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).
*
*
* For best practices of using MessageDeduplicationId, see Using the MessageDeduplicationId Property in the Amazon SQS Developer Guide.
*/
public String getMessageDeduplicationId() {
return this.messageDeduplicationId;
}
/**
*
* This parameter applies only to FIFO (first-in-first-out) queues.
*
*
* The token used for deduplication of messages within a 5-minute minimum deduplication interval. If a message with
* a particular MessageDeduplicationId is sent successfully, subsequent messages with the same
* MessageDeduplicationId are accepted successfully but aren't delivered. For more information, see Exactly-once processing in the Amazon SQS Developer Guide.
*
*
* -
*
* Every message must have a unique MessageDeduplicationId,
*
*
* -
*
* You may provide a MessageDeduplicationId explicitly.
*
*
* -
*
* If you aren't able to provide a MessageDeduplicationId and you enable
* ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the
* MessageDeduplicationId using the body of the message (but not the attributes of the message).
*
*
* -
*
* If you don't provide a MessageDeduplicationId and the queue doesn't have
* ContentBasedDeduplication set, the action fails with an error.
*
*
* -
*
* If the queue has ContentBasedDeduplication set, your MessageDeduplicationId overrides
* the generated one.
*
*
*
*
* -
*
* When ContentBasedDeduplication is in effect, messages with identical content sent within the
* deduplication interval are treated as duplicates and only one copy of the message is delivered.
*
*
* -
*
* If you send one message with ContentBasedDeduplication enabled and then another message with a
* MessageDeduplicationId that is the same as the one generated for the first
* MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message
* is delivered.
*
*
*
*
*
* The MessageDeduplicationId is available to the consumer of the message (this can be useful for
* troubleshooting delivery issues).
*
*
* If a message is sent successfully but the acknowledgement is lost and the message is resent with the same
* MessageDeduplicationId after the deduplication interval, Amazon SQS can't detect duplicate messages.
*
*
* Amazon SQS continues to keep track of the message deduplication ID even after the message is received and
* deleted.
*
*
*
* The length of MessageDeduplicationId is 128 characters. MessageDeduplicationId can
* contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation (
* !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).
*
*
* For best practices of using MessageDeduplicationId, see Using the MessageDeduplicationId Property in the Amazon SQS Developer Guide.
*
*
* @param messageDeduplicationId
* This parameter applies only to FIFO (first-in-first-out) queues.
*
* The token used for deduplication of messages within a 5-minute minimum deduplication interval. If a
* message with a particular MessageDeduplicationId is sent successfully, subsequent messages
* with the same MessageDeduplicationId are accepted successfully but aren't delivered. For more
* information, see Exactly-once processing in the Amazon SQS Developer Guide.
*
*
* -
*
* Every message must have a unique MessageDeduplicationId,
*
*
* -
*
* You may provide a MessageDeduplicationId explicitly.
*
*
* -
*
* If you aren't able to provide a MessageDeduplicationId and you enable
* ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the
* MessageDeduplicationId using the body of the message (but not the attributes of the message).
*
*
* -
*
* If you don't provide a MessageDeduplicationId and the queue doesn't have
* ContentBasedDeduplication set, the action fails with an error.
*
*
* -
*
* If the queue has ContentBasedDeduplication set, your MessageDeduplicationId
* overrides the generated one.
*
*
*
*
* -
*
* When ContentBasedDeduplication is in effect, messages with identical content sent within the
* deduplication interval are treated as duplicates and only one copy of the message is delivered.
*
*
* -
*
* If you send one message with ContentBasedDeduplication enabled and then another message with
* a MessageDeduplicationId that is the same as the one generated for the first
* MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the
* message is delivered.
*
*
*
*
*
* The MessageDeduplicationId is available to the consumer of the message (this can be useful
* for troubleshooting delivery issues).
*
*
* If a message is sent successfully but the acknowledgement is lost and the message is resent with the same
* MessageDeduplicationId after the deduplication interval, Amazon SQS can't detect duplicate
* messages.
*
*
* Amazon SQS continues to keep track of the message deduplication ID even after the message is received and
* deleted.
*
*
*
* The length of MessageDeduplicationId is 128 characters. MessageDeduplicationId
* can contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation
* (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).
*
*
* For best practices of using MessageDeduplicationId, see Using the MessageDeduplicationId Property in the Amazon SQS Developer Guide.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public SendMessageBatchRequestEntry withMessageDeduplicationId(String messageDeduplicationId) {
setMessageDeduplicationId(messageDeduplicationId);
return this;
}
/**
*
* This parameter applies only to FIFO (first-in-first-out) queues.
*
*
* The tag that specifies that a message belongs to a specific message group. Messages that belong to the same
* message group are processed in a FIFO manner (however, messages in different message groups might be processed
* out of order). To interleave multiple ordered streams within a single queue, use MessageGroupId
* values (for example, session data for multiple users). In this scenario, multiple consumers can process the
* queue, but the session data of each user is processed in a FIFO fashion.
*
*
* -
*
* You must associate a non-empty MessageGroupId with a message. If you don't provide a
* MessageGroupId, the action fails.
*
*
* -
*
* ReceiveMessage might return messages with multiple MessageGroupId values. For each
* MessageGroupId, the messages are sorted by time sent. The caller can't specify a
* MessageGroupId.
*
*
*
*
* The length of MessageGroupId is 128 characters. Valid values: alphanumeric characters and
* punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).
*
*
* For best practices of using MessageGroupId, see Using the MessageGroupId Property in the Amazon SQS Developer Guide.
*
*
*
* MessageGroupId is required for FIFO queues. You can't use it for Standard queues.
*
*
*
* @param messageGroupId
* This parameter applies only to FIFO (first-in-first-out) queues.
*
* The tag that specifies that a message belongs to a specific message group. Messages that belong to the
* same message group are processed in a FIFO manner (however, messages in different message groups might be
* processed out of order). To interleave multiple ordered streams within a single queue, use
* MessageGroupId values (for example, session data for multiple users). In this scenario,
* multiple consumers can process the queue, but the session data of each user is processed in a FIFO
* fashion.
*
*
* -
*
* You must associate a non-empty MessageGroupId with a message. If you don't provide a
* MessageGroupId, the action fails.
*
*
* -
*
* ReceiveMessage might return messages with multiple MessageGroupId values. For
* each MessageGroupId, the messages are sorted by time sent. The caller can't specify a
* MessageGroupId.
*
*
*
*
* The length of MessageGroupId is 128 characters. Valid values: alphanumeric characters and
* punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).
*
*
* For best practices of using MessageGroupId, see Using the MessageGroupId Property in the Amazon SQS Developer Guide.
*
*
*
* MessageGroupId is required for FIFO queues. You can't use it for Standard queues.
*
*/
public void setMessageGroupId(String messageGroupId) {
this.messageGroupId = messageGroupId;
}
/**
*
* This parameter applies only to FIFO (first-in-first-out) queues.
*
*
* The tag that specifies that a message belongs to a specific message group. Messages that belong to the same
* message group are processed in a FIFO manner (however, messages in different message groups might be processed
* out of order). To interleave multiple ordered streams within a single queue, use MessageGroupId
* values (for example, session data for multiple users). In this scenario, multiple consumers can process the
* queue, but the session data of each user is processed in a FIFO fashion.
*
*
* -
*
* You must associate a non-empty MessageGroupId with a message. If you don't provide a
* MessageGroupId, the action fails.
*
*
* -
*
* ReceiveMessage might return messages with multiple MessageGroupId values. For each
* MessageGroupId, the messages are sorted by time sent. The caller can't specify a
* MessageGroupId.
*
*
*
*
* The length of MessageGroupId is 128 characters. Valid values: alphanumeric characters and
* punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).
*
*
* For best practices of using MessageGroupId, see Using the MessageGroupId Property in the Amazon SQS Developer Guide.
*
*
*
* MessageGroupId is required for FIFO queues. You can't use it for Standard queues.
*
*
*
* @return This parameter applies only to FIFO (first-in-first-out) queues.
*
* The tag that specifies that a message belongs to a specific message group. Messages that belong to the
* same message group are processed in a FIFO manner (however, messages in different message groups might be
* processed out of order). To interleave multiple ordered streams within a single queue, use
* MessageGroupId values (for example, session data for multiple users). In this scenario,
* multiple consumers can process the queue, but the session data of each user is processed in a FIFO
* fashion.
*
*
* -
*
* You must associate a non-empty MessageGroupId with a message. If you don't provide a
* MessageGroupId, the action fails.
*
*
* -
*
* ReceiveMessage might return messages with multiple MessageGroupId values. For
* each MessageGroupId, the messages are sorted by time sent. The caller can't specify a
* MessageGroupId.
*
*
*
*
* The length of MessageGroupId is 128 characters. Valid values: alphanumeric characters and
* punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).
*
*
* For best practices of using MessageGroupId, see Using the MessageGroupId Property in the Amazon SQS Developer Guide.
*
*
*
* MessageGroupId is required for FIFO queues. You can't use it for Standard queues.
*
*/
public String getMessageGroupId() {
return this.messageGroupId;
}
/**
*
* This parameter applies only to FIFO (first-in-first-out) queues.
*
*
* The tag that specifies that a message belongs to a specific message group. Messages that belong to the same
* message group are processed in a FIFO manner (however, messages in different message groups might be processed
* out of order). To interleave multiple ordered streams within a single queue, use MessageGroupId
* values (for example, session data for multiple users). In this scenario, multiple consumers can process the
* queue, but the session data of each user is processed in a FIFO fashion.
*
*
* -
*
* You must associate a non-empty MessageGroupId with a message. If you don't provide a
* MessageGroupId, the action fails.
*
*
* -
*
* ReceiveMessage might return messages with multiple MessageGroupId values. For each
* MessageGroupId, the messages are sorted by time sent. The caller can't specify a
* MessageGroupId.
*
*
*
*
* The length of MessageGroupId is 128 characters. Valid values: alphanumeric characters and
* punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).
*
*
* For best practices of using MessageGroupId, see Using the MessageGroupId Property in the Amazon SQS Developer Guide.
*
*
*
* MessageGroupId is required for FIFO queues. You can't use it for Standard queues.
*
*
*
* @param messageGroupId
* This parameter applies only to FIFO (first-in-first-out) queues.
*
* The tag that specifies that a message belongs to a specific message group. Messages that belong to the
* same message group are processed in a FIFO manner (however, messages in different message groups might be
* processed out of order). To interleave multiple ordered streams within a single queue, use
* MessageGroupId values (for example, session data for multiple users). In this scenario,
* multiple consumers can process the queue, but the session data of each user is processed in a FIFO
* fashion.
*
*
* -
*
* You must associate a non-empty MessageGroupId with a message. If you don't provide a
* MessageGroupId, the action fails.
*
*
* -
*
* ReceiveMessage might return messages with multiple MessageGroupId values. For
* each MessageGroupId, the messages are sorted by time sent. The caller can't specify a
* MessageGroupId.
*
*
*
*
* The length of MessageGroupId is 128 characters. Valid values: alphanumeric characters and
* punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).
*
*
* For best practices of using MessageGroupId, see Using the MessageGroupId Property in the Amazon SQS Developer Guide.
*
*
*
* MessageGroupId is required for FIFO queues. You can't use it for Standard queues.
*
* @return Returns a reference to this object so that method calls can be chained together.
*/
public SendMessageBatchRequestEntry withMessageGroupId(String messageGroupId) {
setMessageGroupId(messageGroupId);
return this;
}
/**
* Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be
* redacted from this string using a placeholder value.
*
* @return A string representation of this object.
*
* @see java.lang.Object#toString()
*/
@Override
public String toString() {
StringBuilder sb = new StringBuilder();
sb.append("{");
if (getId() != null)
sb.append("Id: ").append(getId()).append(",");
if (getMessageBody() != null)
sb.append("MessageBody: ").append(getMessageBody()).append(",");
if (getDelaySeconds() != null)
sb.append("DelaySeconds: ").append(getDelaySeconds()).append(",");
if (getMessageAttributes() != null)
sb.append("MessageAttributes: ").append(getMessageAttributes()).append(",");
if (getMessageSystemAttributes() != null)
sb.append("MessageSystemAttributes: ").append(getMessageSystemAttributes()).append(",");
if (getMessageDeduplicationId() != null)
sb.append("MessageDeduplicationId: ").append(getMessageDeduplicationId()).append(",");
if (getMessageGroupId() != null)
sb.append("MessageGroupId: ").append(getMessageGroupId());
sb.append("}");
return sb.toString();
}
@Override
public boolean equals(Object obj) {
if (this == obj)
return true;
if (obj == null)
return false;
if (obj instanceof SendMessageBatchRequestEntry == false)
return false;
SendMessageBatchRequestEntry other = (SendMessageBatchRequestEntry) obj;
if (other.getId() == null ^ this.getId() == null)
return false;
if (other.getId() != null && other.getId().equals(this.getId()) == false)
return false;
if (other.getMessageBody() == null ^ this.getMessageBody() == null)
return false;
if (other.getMessageBody() != null && other.getMessageBody().equals(this.getMessageBody()) == false)
return false;
if (other.getDelaySeconds() == null ^ this.getDelaySeconds() == null)
return false;
if (other.getDelaySeconds() != null && other.getDelaySeconds().equals(this.getDelaySeconds()) == false)
return false;
if (other.getMessageAttributes() == null ^ this.getMessageAttributes() == null)
return false;
if (other.getMessageAttributes() != null && other.getMessageAttributes().equals(this.getMessageAttributes()) == false)
return false;
if (other.getMessageSystemAttributes() == null ^ this.getMessageSystemAttributes() == null)
return false;
if (other.getMessageSystemAttributes() != null && other.getMessageSystemAttributes().equals(this.getMessageSystemAttributes()) == false)
return false;
if (other.getMessageDeduplicationId() == null ^ this.getMessageDeduplicationId() == null)
return false;
if (other.getMessageDeduplicationId() != null && other.getMessageDeduplicationId().equals(this.getMessageDeduplicationId()) == false)
return false;
if (other.getMessageGroupId() == null ^ this.getMessageGroupId() == null)
return false;
if (other.getMessageGroupId() != null && other.getMessageGroupId().equals(this.getMessageGroupId()) == false)
return false;
return true;
}
@Override
public int hashCode() {
final int prime = 31;
int hashCode = 1;
hashCode = prime * hashCode + ((getId() == null) ? 0 : getId().hashCode());
hashCode = prime * hashCode + ((getMessageBody() == null) ? 0 : getMessageBody().hashCode());
hashCode = prime * hashCode + ((getDelaySeconds() == null) ? 0 : getDelaySeconds().hashCode());
hashCode = prime * hashCode + ((getMessageAttributes() == null) ? 0 : getMessageAttributes().hashCode());
hashCode = prime * hashCode + ((getMessageSystemAttributes() == null) ? 0 : getMessageSystemAttributes().hashCode());
hashCode = prime * hashCode + ((getMessageDeduplicationId() == null) ? 0 : getMessageDeduplicationId().hashCode());
hashCode = prime * hashCode + ((getMessageGroupId() == null) ? 0 : getMessageGroupId().hashCode());
return hashCode;
}
@Override
public SendMessageBatchRequestEntry clone() {
try {
return (SendMessageBatchRequestEntry) super.clone();
} catch (CloneNotSupportedException e) {
throw new IllegalStateException("Got a CloneNotSupportedException from Object.clone() " + "even though we're Cloneable!", e);
}
}
@com.amazonaws.annotation.SdkInternalApi
@Override
public void marshall(ProtocolMarshaller protocolMarshaller) {
com.amazonaws.services.sqs.model.transform.SendMessageBatchRequestEntryMarshaller.getInstance().marshall(this, protocolMarshaller);
}
}