com.amazonaws.services.ec2.AmazonEC2Client Maven / Gradle / Ivy
/*
* Copyright 2010-2011 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License").
* You may not use this file except in compliance with the License.
* A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
* express or implied. See the License for the specific language governing
* permissions and limitations under the License.
*/
package com.amazonaws.services.ec2;
import org.w3c.dom.Node;
import java.util.ArrayList;
import java.util.List;
import java.util.Map.Entry;
import java.security.SignatureException;
import com.amazonaws.*;
import com.amazonaws.auth.AWSCredentials;
import com.amazonaws.auth.AWS3Signer;
import com.amazonaws.auth.QueryStringSigner;
import com.amazonaws.handlers.HandlerChainFactory;
import com.amazonaws.handlers.RequestHandler;
import com.amazonaws.http.StaxResponseHandler;
import com.amazonaws.http.DefaultErrorResponseHandler;
import com.amazonaws.http.HttpClient;
import com.amazonaws.http.HttpMethodName;
import com.amazonaws.http.HttpRequest;
import com.amazonaws.transform.Unmarshaller;
import com.amazonaws.transform.StaxUnmarshallerContext;
import com.amazonaws.transform.LegacyErrorUnmarshaller;
import com.amazonaws.services.ec2.model.*;
import com.amazonaws.services.ec2.model.transform.*;
/**
* Client for accessing AmazonEC2. All service calls made
* using this client are blocking, and will not return until the service call
* completes.
*
*
* Amazon Elastic Compute Cloud (Amazon EC2) is a web service that
* provides resizable compute capacity in the cloud. It is designed to
* make web-scale computing easier for developers.
*
*
* Amazon EC2's simple web service interface allows you to obtain and
* configure capacity with minimal friction. It provides you with
* complete control of your computing resources and lets you run on
* Amazon's proven computing environment. Amazon EC2 reduces the time
* required to obtain and boot new server instances to minutes, allowing
* you to quickly scale capacity, both up and down, as your computing
* requirements change. Amazon EC2 changes the economics of computing by
* allowing you to pay only for capacity that you actually use. Amazon
* EC2 provides developers the tools to build failure resilient
* applications and isolate themselves from common failure scenarios.
*
*
* Visit
* http://aws.amazon.com/ec2/ for more information.
*
*/
public class AmazonEC2Client extends AmazonWebServiceClient implements AmazonEC2 {
/**
* The AWS credentials (access key ID and secret key) to use when
* authenticating with AWS services.
*/
private AWSCredentials awsCredentials;
/**
* List of exception unmarshallers for all AmazonEC2 exceptions.
*/
protected final List> exceptionUnmarshallers;
/** Low level client for sending requests to AWS services. */
protected final HttpClient client;
/** Optional request handlers for additional request processing. */
private List requestHandlers = new ArrayList();
/** AWS signer for authenticating requests. */
private QueryStringSigner signer;
/**
* Constructs a new client to invoke service methods on
* AmazonEC2 using the specified AWS account credentials.
*
*
* All service calls made using this new client object are blocking, and will not
* return until the service call completes.
*
* @param awsCredentials The AWS credentials (access key ID and secret key) to use
* when authenticating with AWS services.
*/
public AmazonEC2Client(AWSCredentials awsCredentials) {
this(awsCredentials, new ClientConfiguration());
}
/**
* Constructs a new client to invoke service methods on
* AmazonEC2 using the specified AWS account credentials
* and client configuration options.
*
*
* All service calls made using this new client object are blocking, and will not
* return until the service call completes.
*
* @param awsCredentials The AWS credentials (access key ID and secret key) to use
* when authenticating with AWS services.
* @param clientConfiguration The client configuration options controlling how this
* client connects to AmazonEC2
* (ex: proxy settings, retry counts, etc.).
*/
public AmazonEC2Client(AWSCredentials awsCredentials, ClientConfiguration clientConfiguration) {
super(clientConfiguration);
this.awsCredentials = awsCredentials;
exceptionUnmarshallers = new ArrayList>();
exceptionUnmarshallers.add(new LegacyErrorUnmarshaller());
setEndpoint("ec2.amazonaws.com");
signer = new QueryStringSigner(awsCredentials);
requestHandlers = new HandlerChainFactory().newRequestHandlerChain(
"/com/amazonaws/services/ec2/request.handlers");
client = new HttpClient(clientConfiguration);
}
/**
*
* The RebootInstances operation requests a reboot of one or more
* instances. This operation is asynchronous; it only queues a request to
* reboot the specified instance(s). The operation will succeed if the
* instances are valid and belong to the user. Requests to reboot
* terminated instances are ignored.
*
*
* @param rebootInstancesRequest Container for the necessary parameters
* to execute the RebootInstances service method on AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void rebootInstances(RebootInstancesRequest rebootInstancesRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new RebootInstancesRequestMarshaller().marshall(rebootInstancesRequest);
invoke(request, null);
}
/**
*
* Returns information about one or more PlacementGroup instances in a
* user's account.
*
*
* @param describePlacementGroupsRequest Container for the necessary
* parameters to execute the DescribePlacementGroups service method on
* AmazonEC2.
*
* @return The response from the DescribePlacementGroups service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribePlacementGroupsResult describePlacementGroups(DescribePlacementGroupsRequest describePlacementGroupsRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribePlacementGroupsRequestMarshaller().marshall(describePlacementGroupsRequest);
return invoke(request, new DescribePlacementGroupsResultStaxUnmarshaller());
}
/**
*
* The RunInstances operation launches a specified number of instances.
*
*
* If Amazon EC2 cannot launch the minimum number AMIs you request, no
* instances launch. If there is insufficient capacity to launch the
* maximum number of AMIs you request, Amazon EC2 launches as many as
* possible to satisfy the requested maximum values.
*
*
* Every instance is launched in a security group. If you do not specify
* a security group at launch, the instances start in your default
* security group. For more information on creating security groups, see
* CreateSecurityGroup.
*
*
* An optional instance type can be specified. For information about
* instance types, see Instance Types.
*
*
* You can provide an optional key pair ID for each image in the launch
* request (for more information, see CreateKeyPair). All instances that
* are created from images that use this key pair will have access to the
* associated public key at boot. You can use this key to provide secure
* access to an instance of an image on a per-instance basis. Amazon EC2
* public images use this feature to provide secure access without
* passwords.
*
*
* IMPORTANT: Launching public images without a key pair ID will
* leave them inaccessible. The public key material is made available to
* the instance at boot time by placing it in the openssh_id.pub file on
* a logical device that is exposed to the instance as /dev/sda2 (the
* ephemeral store). The format of this file is suitable for use as an
* entry within ~/.ssh/authorized_keys (the OpenSSH format). This can be
* done at boot (e.g., as part of rc.local) allowing for secure access
* without passwords. Optional user data can be provided in the launch
* request. All instances that collectively comprise the launch request
* have access to this data For more information, see Instance Metadata.
*
*
* NOTE: If any of the AMIs have a product code attached for which
* the user has not subscribed, the RunInstances call will fail.
*
*
* IMPORTANT: We strongly recommend using the 2.6.18 Xen stock
* kernel with the c1.medium and c1.xlarge instances. Although the
* default Amazon EC2 kernels will work, the new kernels provide greater
* stability and performance for these instance types. For more
* information about kernels, see Kernels, RAM Disks, and Block Device
* Mappings.
*
*
* @param runInstancesRequest Container for the necessary parameters to
* execute the RunInstances service method on AmazonEC2.
*
* @return The response from the RunInstances service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public RunInstancesResult runInstances(RunInstancesRequest runInstancesRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new RunInstancesRequestMarshaller().marshall(runInstancesRequest);
return invoke(request, new RunInstancesResultStaxUnmarshaller());
}
/**
*
* The DescribeReservedInstances operation describes Reserved Instances
* that were purchased for use with your account.
*
*
* @param describeReservedInstancesRequest Container for the necessary
* parameters to execute the DescribeReservedInstances service method on
* AmazonEC2.
*
* @return The response from the DescribeReservedInstances service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeReservedInstancesResult describeReservedInstances(DescribeReservedInstancesRequest describeReservedInstancesRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeReservedInstancesRequestMarshaller().marshall(describeReservedInstancesRequest);
return invoke(request, new DescribeReservedInstancesResultStaxUnmarshaller());
}
/**
*
* Gives you information about your subnets. You can filter the results
* to return information only about subnets that match criteria you
* specify. For example, you could ask to get information about a
* particular subnet (or all) only if the subnet's state is available.
* You can specify multiple filters (e.g., the subnet is in a particular
* VPC, and the subnet's state is available). The result includes
* information for a particular subnet only if the subnet matches all
* your filters. If there's no match, no special message is returned; the
* response is simply empty. The following table shows the available
* filters.
*
*
* @param describeSubnetsRequest Container for the necessary parameters
* to execute the DescribeSubnets service method on AmazonEC2.
*
* @return The response from the DescribeSubnets service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSubnetsResult describeSubnets(DescribeSubnetsRequest describeSubnetsRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeSubnetsRequestMarshaller().marshall(describeSubnetsRequest);
return invoke(request, new DescribeSubnetsResultStaxUnmarshaller());
}
/**
*
* The DescribeAvailabilityZones operation describes availability zones
* that are currently available to the account and their states.
*
*
* Availability zones are not the same across accounts. The availability
* zone us-east-1a for account A is not necessarily the same as
* us-east-1a for account B. Zone assignments are mapped independently
* for each account.
*
*
* @param describeAvailabilityZonesRequest Container for the necessary
* parameters to execute the DescribeAvailabilityZones service method on
* AmazonEC2.
*
* @return The response from the DescribeAvailabilityZones service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeAvailabilityZonesResult describeAvailabilityZones(DescribeAvailabilityZonesRequest describeAvailabilityZonesRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeAvailabilityZonesRequestMarshaller().marshall(describeAvailabilityZonesRequest);
return invoke(request, new DescribeAvailabilityZonesResultStaxUnmarshaller());
}
/**
*
* Detach a previously attached volume from a running instance.
*
*
* @param detachVolumeRequest Container for the necessary parameters to
* execute the DetachVolume service method on AmazonEC2.
*
* @return The response from the DetachVolume service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DetachVolumeResult detachVolume(DetachVolumeRequest detachVolumeRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DetachVolumeRequestMarshaller().marshall(detachVolumeRequest);
return invoke(request, new DetachVolumeResultStaxUnmarshaller());
}
/**
*
* The DeleteKeyPair operation deletes a key pair.
*
*
* @param deleteKeyPairRequest Container for the necessary parameters to
* execute the DeleteKeyPair service method on AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteKeyPair(DeleteKeyPairRequest deleteKeyPairRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DeleteKeyPairRequestMarshaller().marshall(deleteKeyPairRequest);
invoke(request, null);
}
/**
*
* The DescribeInstances operation returns information about instances
* that you own.
*
*
* If you specify one or more instance IDs, Amazon EC2 returns
* information for those instances. If you do not specify instance IDs,
* Amazon EC2 returns information for all relevant instances. If you
* specify an invalid instance ID, a fault is returned. If you specify an
* instance that you do not own, it will not be included in the returned
* results.
*
*
* Recently terminated instances might appear in the returned results.
* This interval is usually less than one hour.
*
*
* @param describeInstancesRequest Container for the necessary parameters
* to execute the DescribeInstances service method on AmazonEC2.
*
* @return The response from the DescribeInstances service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeInstancesResult describeInstances(DescribeInstancesRequest describeInstancesRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeInstancesRequestMarshaller().marshall(describeInstancesRequest);
return invoke(request, new DescribeInstancesResultStaxUnmarshaller());
}
/**
*
* The DescribeImages operation returns information about AMIs, AKIs,
* and ARIs available to the user. Information returned includes image
* type, product codes, architecture, and kernel and RAM disk IDs. Images
* available to the user include public images available for any user to
* launch, private images owned by the user making the request, and
* private images owned by other users for which the user has explicit
* launch permissions.
*
*
* Launch permissions fall into three categories:
*
*
*
* - Public: The owner of the AMI granted launch permissions for the
* AMI to the all group. All users have launch permissions for these
* AMIs.
* - Explicit: The owner of the AMI granted launch permissions to a
* specific user.
* - Implicit: A user has implicit launch permissions for all AMIs he
* or she owns.
*
*
*
* The list of AMIs returned can be modified by specifying AMI IDs, AMI
* owners, or users with launch permissions. If no options are specified,
* Amazon EC2 returns all AMIs for which the user has launch permissions.
*
*
* If you specify one or more AMI IDs, only AMIs that have the specified
* IDs are returned. If you specify an invalid AMI ID, a fault is
* returned. If you specify an AMI ID for which you do not have access,
* it will not be included in the returned results.
*
*
* If you specify one or more AMI owners, only AMIs from the specified
* owners and for which you have access are returned. The results can
* include the account IDs of the specified owners, amazon for AMIs owned
* by Amazon or self for AMIs that you own.
*
*
* If you specify a list of executable users, only users that have
* launch permissions for the AMIs are returned. You can specify account
* IDs (if you own the AMI(s)), self for AMIs for which you own or have
* explicit permissions, or all for public AMIs.
*
*
* NOTE: Deregistered images are included in the returned results
* for an unspecified interval after deregistration.
*
*
* @param describeImagesRequest Container for the necessary parameters to
* execute the DescribeImages service method on AmazonEC2.
*
* @return The response from the DescribeImages service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeImagesResult describeImages(DescribeImagesRequest describeImagesRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeImagesRequestMarshaller().marshall(describeImagesRequest);
return invoke(request, new DescribeImagesResultStaxUnmarshaller());
}
/**
*
* Starts an instance that uses an Amazon EBS volume as its root device.
* Instances that use Amazon EBS volumes as their root devices can be
* quickly stopped and started. When an instance is stopped, the compute
* resources are released and you are not billed for hourly instance
* usage. However, your root partition Amazon EBS volume remains,
* continues to persist your data, and you are charged for Amazon EBS
* volume usage. You can restart your instance at any time.
*
*
* NOTE: Before stopping an instance, make sure it is in a state
* from which it can be restarted. Stopping an instance does not preserve
* data stored in RAM. Performing this operation on an instance that uses
* an instance store as its root device returns an error.
*
*
* @param startInstancesRequest Container for the necessary parameters to
* execute the StartInstances service method on AmazonEC2.
*
* @return The response from the StartInstances service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public StartInstancesResult startInstances(StartInstancesRequest startInstancesRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new StartInstancesRequestMarshaller().marshall(startInstancesRequest);
return invoke(request, new StartInstancesResultStaxUnmarshaller());
}
/**
*
* Disables monitoring for a running instance.
*
*
* @param unmonitorInstancesRequest Container for the necessary
* parameters to execute the UnmonitorInstances service method on
* AmazonEC2.
*
* @return The response from the UnmonitorInstances service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public UnmonitorInstancesResult unmonitorInstances(UnmonitorInstancesRequest unmonitorInstancesRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new UnmonitorInstancesRequestMarshaller().marshall(unmonitorInstancesRequest);
return invoke(request, new UnmonitorInstancesResultStaxUnmarshaller());
}
/**
*
* Attaches a VPN gateway to a VPC. This is the last step required to
* get your VPC fully connected to your data center before launching
* instances in it. For more information, go to Process for Using Amazon
* VPC in the Amazon Virtual Private Cloud Developer Guide.
*
*
* @param attachVpnGatewayRequest Container for the necessary parameters
* to execute the AttachVpnGateway service method on AmazonEC2.
*
* @return The response from the AttachVpnGateway service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public AttachVpnGatewayResult attachVpnGateway(AttachVpnGatewayRequest attachVpnGatewayRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new AttachVpnGatewayRequestMarshaller().marshall(attachVpnGatewayRequest);
return invoke(request, new AttachVpnGatewayResultStaxUnmarshaller());
}
/**
*
* Modifies an attribute of an instance.
*
*
* @param modifyInstanceAttributeRequest Container for the necessary
* parameters to execute the ModifyInstanceAttribute service method on
* AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void modifyInstanceAttribute(ModifyInstanceAttributeRequest modifyInstanceAttributeRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new ModifyInstanceAttributeRequestMarshaller().marshall(modifyInstanceAttributeRequest);
invoke(request, null);
}
/**
*
* Deletes a set of DHCP options that you specify. Amazon VPC returns an
* error if the set of options you specify is currently associated with a
* VPC. You can disassociate the set of options by associating either a
* new set of options or the default options with the VPC.
*
*
* @param deleteDhcpOptionsRequest Container for the necessary parameters
* to execute the DeleteDhcpOptions service method on AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteDhcpOptions(DeleteDhcpOptionsRequest deleteDhcpOptionsRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DeleteDhcpOptionsRequestMarshaller().marshall(deleteDhcpOptionsRequest);
invoke(request, null);
}
/**
*
* The DeleteSecurityGroup operation deletes a security group.
*
*
* NOTE: If you attempt to delete a security group that contains
* instances, a fault is returned. If you attempt to delete a security
* group that is referenced by another security group, a fault is
* returned. For example, if security group B has a rule that allows
* access from security group A, security group A cannot be deleted until
* the allow rule is removed.
*
*
* @param deleteSecurityGroupRequest Container for the necessary
* parameters to execute the DeleteSecurityGroup service method on
* AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteSecurityGroup(DeleteSecurityGroupRequest deleteSecurityGroupRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DeleteSecurityGroupRequestMarshaller().marshall(deleteSecurityGroupRequest);
invoke(request, null);
}
/**
*
* Creates an AMI that uses an Amazon EBS root device from a "running"
* or "stopped" instance. AMIs that use an Amazon EBS root device boot
* faster than AMIs that use instance stores. They can be up to 1 TiB in
* size, use storage that persists on instance failure, and can be
* stopped and started.
*
*
* @param createImageRequest Container for the necessary parameters to
* execute the CreateImage service method on AmazonEC2.
*
* @return The response from the CreateImage service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateImageResult createImage(CreateImageRequest createImageRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new CreateImageRequestMarshaller().marshall(createImageRequest);
return invoke(request, new CreateImageResultStaxUnmarshaller());
}
/**
*
* The AuthorizeSecurityGroupIngress operation adds permissions to a
* security group.
*
*
* Permissions are specified by the IP protocol (TCP, UDP or ICMP), the
* source of the request (by IP range or an Amazon EC2 user-group pair),
* the source and destination port ranges (for TCP and UDP), and the ICMP
* codes and types (for ICMP). When authorizing ICMP, -1 can be used as a
* wildcard in the type and code fields.
*
*
* Permission changes are propagated to instances within the security
* group as quickly as possible. However, depending on the number of
* instances, a small delay might occur.
*
*
* @param authorizeSecurityGroupIngressRequest Container for the
* necessary parameters to execute the AuthorizeSecurityGroupIngress
* service method on AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void authorizeSecurityGroupIngress(AuthorizeSecurityGroupIngressRequest authorizeSecurityGroupIngressRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new AuthorizeSecurityGroupIngressRequestMarshaller().marshall(authorizeSecurityGroupIngressRequest);
invoke(request, null);
}
/**
*
*
*
*
* @param describeSpotInstanceRequestsRequest Container for the necessary
* parameters to execute the DescribeSpotInstanceRequests service method
* on AmazonEC2.
*
* @return The response from the DescribeSpotInstanceRequests service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSpotInstanceRequestsResult describeSpotInstanceRequests(DescribeSpotInstanceRequestsRequest describeSpotInstanceRequestsRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeSpotInstanceRequestsRequestMarshaller().marshall(describeSpotInstanceRequestsRequest);
return invoke(request, new DescribeSpotInstanceRequestsResultStaxUnmarshaller());
}
/**
*
* Associates a set of DHCP options (that you've previously created)
* with the specified VPC. Or, associates the default DHCP options with
* the VPC. The default set consists of the standard EC2 host name, no
* domain name, no DNS server, no NTP server, and no NetBIOS server or
* node type. After you associate the options with the VPC, any existing
* instances and all new instances that you launch in that VPC use the
* options. For more information about the supported DHCP options and
* using them with Amazon VPC, go to Using DHCP Options in the Amazon
* Virtual Private Cloud Developer Guide.
*
*
* @param associateDhcpOptionsRequest Container for the necessary
* parameters to execute the AssociateDhcpOptions service method on
* AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void associateDhcpOptions(AssociateDhcpOptionsRequest associateDhcpOptionsRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new AssociateDhcpOptionsRequestMarshaller().marshall(associateDhcpOptionsRequest);
invoke(request, null);
}
/**
*
* Retrieves the encrypted administrator password for the instances
* running Windows.
*
*
* NOTE: The Windows password is only generated the first time an
* AMI is launched. It is not generated for rebundled AMIs or after the
* password is changed on an instance. The password is encrypted using
* the key pair that you provided.
*
*
* @param getPasswordDataRequest Container for the necessary parameters
* to execute the GetPasswordData service method on AmazonEC2.
*
* @return The response from the GetPasswordData service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public GetPasswordDataResult getPasswordData(GetPasswordDataRequest getPasswordDataRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new GetPasswordDataRequestMarshaller().marshall(getPasswordDataRequest);
return invoke(request, new GetPasswordDataResultStaxUnmarshaller());
}
/**
*
* Creates a VPC with the CIDR block you specify. The smallest VPC you
* can create uses a /28 netmask (16 IP addresses), and the largest uses
* a /18 netmask (16,384 IP addresses). To help you decide how big to
* make your VPC, go to the topic about creating VPCs in the Amazon
* Virtual Private Cloud Developer Guide.
*
*
* By default, each instance you launch in the VPC has the default DHCP
* options (the standard EC2 host name, no domain name, no DNS server, no
* NTP server, and no NetBIOS server or node type).
*
*
* @param createVpcRequest Container for the necessary parameters to
* execute the CreateVpc service method on AmazonEC2.
*
* @return The response from the CreateVpc service method, as returned by
* AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateVpcResult createVpc(CreateVpcRequest createVpcRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new CreateVpcRequestMarshaller().marshall(createVpcRequest);
return invoke(request, new CreateVpcResultStaxUnmarshaller());
}
/**
*
* Stops an instance that uses an Amazon EBS volume as its root device.
* Instances that use Amazon EBS volumes as their root devices can be
* quickly stopped and started. When an instance is stopped, the compute
* resources are released and you are not billed for hourly instance
* usage. However, your root partition Amazon EBS volume remains,
* continues to persist your data, and you are charged for Amazon EBS
* volume usage. You can restart your instance at any time.
*
*
* NOTE: Before stopping an instance, make sure it is in a state
* from which it can be restarted. Stopping an instance does not preserve
* data stored in RAM. Performing this operation on an instance that uses
* an instance store as its root device returns an error.
*
*
* @param stopInstancesRequest Container for the necessary parameters to
* execute the StopInstances service method on AmazonEC2.
*
* @return The response from the StopInstances service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public StopInstancesResult stopInstances(StopInstancesRequest stopInstancesRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new StopInstancesRequestMarshaller().marshall(stopInstancesRequest);
return invoke(request, new StopInstancesResultStaxUnmarshaller());
}
/**
*
* Gives you information about your customer gateways. You can filter
* the results to return information only about customer gateways that
* match criteria you specify. For example, you could ask to get
* information about a particular customer gateway (or all) only if the
* gateway's state is pending or available. You can specify multiple
* filters (e.g., the customer gateway has a particular IP address for
* the Internet-routable external interface, and the gateway's state is
* pending or available). The result includes information for a
* particular customer gateway only if the gateway matches all your
* filters. If there's no match, no special message is returned; the
* response is simply empty. The following table shows the available
* filters.
*
*
* @param describeCustomerGatewaysRequest Container for the necessary
* parameters to execute the DescribeCustomerGateways service method on
* AmazonEC2.
*
* @return The response from the DescribeCustomerGateways service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeCustomerGatewaysResult describeCustomerGateways(DescribeCustomerGatewaysRequest describeCustomerGatewaysRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeCustomerGatewaysRequestMarshaller().marshall(describeCustomerGatewaysRequest);
return invoke(request, new DescribeCustomerGatewaysResultStaxUnmarshaller());
}
/**
*
* Imports the public key from an RSA key pair created with a
* third-party tool. This operation differs from CreateKeyPair as the
* private key is never transferred between the caller and AWS servers.
*
*
* RSA key pairs are easily created on Microsoft Windows and Linux OS
* systems using the ssh-keygen command line tool provided
* with the standard OpenSSH installation. Standard library support for
* RSA key pair creation is also available for Java, Ruby, Python, and
* many other programming languages.
*
*
* The following formats are supported:
*
*
*
* - OpenSSH public key format,
* - Base64 encoded DER format.
* - SSH public key file format as specified in RFC4716 .
*
*
*
* @param importKeyPairRequest Container for the necessary parameters to
* execute the ImportKeyPair service method on AmazonEC2.
*
* @return The response from the ImportKeyPair service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public ImportKeyPairResult importKeyPair(ImportKeyPairRequest importKeyPairRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new ImportKeyPairRequestMarshaller().marshall(importKeyPairRequest);
return invoke(request, new ImportKeyPairResultStaxUnmarshaller());
}
/**
*
* Describes the Spot Price history.
*
*
* Spot Instances are instances that Amazon EC2 starts on your behalf
* when the maximum price that you specify exceeds the current Spot
* Price. Amazon EC2 periodically sets the Spot Price based on available
* Spot Instance capacity and current spot instance requests.
*
*
* For conceptual information about Spot Instances, refer to the Amazon
* Elastic Compute Cloud Developer Guide or Amazon Elastic Compute Cloud
* User Guide .
*
*
*
* @param describeSpotPriceHistoryRequest Container for the necessary
* parameters to execute the DescribeSpotPriceHistory service method on
* AmazonEC2.
*
* @return The response from the DescribeSpotPriceHistory service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSpotPriceHistoryResult describeSpotPriceHistory(DescribeSpotPriceHistoryRequest describeSpotPriceHistoryRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeSpotPriceHistoryRequestMarshaller().marshall(describeSpotPriceHistoryRequest);
return invoke(request, new DescribeSpotPriceHistoryResultStaxUnmarshaller());
}
/**
*
* The CreateSecurityGroup operation creates a new security group.
*
*
* Every instance is launched in a security group. If no security group
* is specified during launch, the instances are launched in the default
* security group. Instances within the same security group have
* unrestricted network access to each other. Instances will reject
* network access attempts from other instances in a different security
* group. As the owner of instances you can grant or revoke specific
* permissions using the AuthorizeSecurityGroupIngress and
* RevokeSecurityGroupIngress operations.
*
*
* @param createSecurityGroupRequest Container for the necessary
* parameters to execute the CreateSecurityGroup service method on
* AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void createSecurityGroup(CreateSecurityGroupRequest createSecurityGroupRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new CreateSecurityGroupRequestMarshaller().marshall(createSecurityGroupRequest);
invoke(request, null);
}
/**
*
* The DescribeRegions operation describes regions zones that are
* currently available to the account.
*
*
* @param describeRegionsRequest Container for the necessary parameters
* to execute the DescribeRegions service method on AmazonEC2.
*
* @return The response from the DescribeRegions service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeRegionsResult describeRegions(DescribeRegionsRequest describeRegionsRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeRegionsRequestMarshaller().marshall(describeRegionsRequest);
return invoke(request, new DescribeRegionsResultStaxUnmarshaller());
}
/**
*
* Creates a set of DHCP options that you can then associate with one or
* more VPCs, causing all existing and new instances that you launch in
* those VPCs to use the set of DHCP options. The following table lists
* the individual DHCP options you can specify. For more information
* about the options, go to http://www.ietf.org/rfc/rfc2132.txt
*
*
* @param createDhcpOptionsRequest Container for the necessary parameters
* to execute the CreateDhcpOptions service method on AmazonEC2.
*
* @return The response from the CreateDhcpOptions service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateDhcpOptionsResult createDhcpOptions(CreateDhcpOptionsRequest createDhcpOptionsRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new CreateDhcpOptionsRequestMarshaller().marshall(createDhcpOptionsRequest);
return invoke(request, new CreateDhcpOptionsResultStaxUnmarshaller());
}
/**
*
* Resets permission settings for the specified snapshot.
*
*
* @param resetSnapshotAttributeRequest Container for the necessary
* parameters to execute the ResetSnapshotAttribute service method on
* AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void resetSnapshotAttribute(ResetSnapshotAttributeRequest resetSnapshotAttributeRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new ResetSnapshotAttributeRequestMarshaller().marshall(resetSnapshotAttributeRequest);
invoke(request, null);
}
/**
*
* The DescribeSecurityGroups operation returns information about
* security groups that you own.
*
*
* If you specify security group names, information about those security
* group is returned. Otherwise, information for all security group is
* returned. If you specify a group that does not exist, a fault is
* returned.
*
*
* @param describeSecurityGroupsRequest Container for the necessary
* parameters to execute the DescribeSecurityGroups service method on
* AmazonEC2.
*
* @return The response from the DescribeSecurityGroups service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSecurityGroupsResult describeSecurityGroups(DescribeSecurityGroupsRequest describeSecurityGroupsRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeSecurityGroupsRequestMarshaller().marshall(describeSecurityGroupsRequest);
return invoke(request, new DescribeSecurityGroupsResultStaxUnmarshaller());
}
/**
*
* Creates a Spot Instance request.
*
*
* Spot Instances are instances that Amazon EC2 starts on your behalf
* when the maximum price that you specify exceeds the current Spot
* Price. Amazon EC2 periodically sets the Spot Price based on available
* Spot Instance capacity and current spot instance requests.
*
*
* For conceptual information about Spot Instances, refer to the Amazon
* Elastic Compute Cloud Developer Guide or Amazon Elastic Compute Cloud
* User Guide.
*
*
* @param requestSpotInstancesRequest Container for the necessary
* parameters to execute the RequestSpotInstances service method on
* AmazonEC2.
*
* @return The response from the RequestSpotInstances service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public RequestSpotInstancesResult requestSpotInstances(RequestSpotInstancesRequest requestSpotInstancesRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new RequestSpotInstancesRequestMarshaller().marshall(requestSpotInstancesRequest);
return invoke(request, new RequestSpotInstancesResultStaxUnmarshaller());
}
/**
*
* Adds or overwrites tags for the specified resources. Each resource
* can have a maximum of 10 tags. Each tag consists of a key-value pair.
* Tag keys must be unique per resource.
*
*
* @param createTagsRequest Container for the necessary parameters to
* execute the CreateTags service method on AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void createTags(CreateTagsRequest createTagsRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new CreateTagsRequestMarshaller().marshall(createTagsRequest);
invoke(request, null);
}
/**
*
* Detaches a VPN gateway from a VPC. You do this if you're planning to
* turn off the VPC and not use it anymore. You can confirm a VPN gateway
* has been completely detached from a VPC by describing the VPN gateway
* (any attachments to the VPN gateway are also described).
*
*
* You must wait for the attachment's state to switch to detached before
* you can delete the VPC or attach a different VPC to the VPN gateway.
*
*
* @param detachVpnGatewayRequest Container for the necessary parameters
* to execute the DetachVpnGateway service method on AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void detachVpnGateway(DetachVpnGatewayRequest detachVpnGatewayRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DetachVpnGatewayRequestMarshaller().marshall(detachVpnGatewayRequest);
invoke(request, null);
}
/**
*
* The DeregisterImage operation deregisters an AMI. Once deregistered,
* instances of the AMI can no longer be launched.
*
*
* @param deregisterImageRequest Container for the necessary parameters
* to execute the DeregisterImage service method on AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deregisterImage(DeregisterImageRequest deregisterImageRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DeregisterImageRequestMarshaller().marshall(deregisterImageRequest);
invoke(request, null);
}
/**
*
* Describes the data feed for Spot Instances.
*
*
* For conceptual information about Spot Instances, refer to the Amazon
* Elastic Compute Cloud Developer Guide or Amazon Elastic Compute Cloud
* User Guide .
*
*
*
* @param describeSpotDatafeedSubscriptionRequest Container for the
* necessary parameters to execute the DescribeSpotDatafeedSubscription
* service method on AmazonEC2.
*
* @return The response from the DescribeSpotDatafeedSubscription service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSpotDatafeedSubscriptionResult describeSpotDatafeedSubscription(DescribeSpotDatafeedSubscriptionRequest describeSpotDatafeedSubscriptionRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeSpotDatafeedSubscriptionRequestMarshaller().marshall(describeSpotDatafeedSubscriptionRequest);
return invoke(request, new DescribeSpotDatafeedSubscriptionResultStaxUnmarshaller());
}
/**
*
* Deletes tags from the specified Amazon EC2 resources.
*
*
* @param deleteTagsRequest Container for the necessary parameters to
* execute the DeleteTags service method on AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteTags(DeleteTagsRequest deleteTagsRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DeleteTagsRequestMarshaller().marshall(deleteTagsRequest);
invoke(request, null);
}
/**
*
* Describes the tags for the specified resources.
*
*
* @param describeTagsRequest Container for the necessary parameters to
* execute the DescribeTags service method on AmazonEC2.
*
* @return The response from the DescribeTags service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeTagsResult describeTags(DescribeTagsRequest describeTagsRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeTagsRequestMarshaller().marshall(describeTagsRequest);
return invoke(request, new DescribeTagsResultStaxUnmarshaller());
}
/**
*
* Deletes a subnet from a VPC. You must terminate all running instances
* in the subnet before deleting it, otherwise Amazon VPC returns an
* error.
*
*
* @param deleteSubnetRequest Container for the necessary parameters to
* execute the DeleteSubnet service method on AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteSubnet(DeleteSubnetRequest deleteSubnetRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DeleteSubnetRequestMarshaller().marshall(deleteSubnetRequest);
invoke(request, null);
}
/**
*
* Creates a new VPN gateway. A VPN gateway is the VPC-side endpoint for
* your VPN connection. You can create a VPN gateway before creating the
* VPC itself.
*
*
* @param createVpnGatewayRequest Container for the necessary parameters
* to execute the CreateVpnGateway service method on AmazonEC2.
*
* @return The response from the CreateVpnGateway service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateVpnGatewayResult createVpnGateway(CreateVpnGatewayRequest createVpnGatewayRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new CreateVpnGatewayRequestMarshaller().marshall(createVpnGatewayRequest);
return invoke(request, new CreateVpnGatewayResultStaxUnmarshaller());
}
/**
*
* CancelBundleTask operation cancels a pending or in-progress bundling
* task. This is an asynchronous call and it make take a while for the
* task to be canceled. If a task is canceled while it is storing items,
* there may be parts of the incomplete AMI stored in S3. It is up to the
* caller to clean up these parts from S3.
*
*
* @param cancelBundleTaskRequest Container for the necessary parameters
* to execute the CancelBundleTask service method on AmazonEC2.
*
* @return The response from the CancelBundleTask service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CancelBundleTaskResult cancelBundleTask(CancelBundleTaskRequest cancelBundleTaskRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new CancelBundleTaskRequestMarshaller().marshall(cancelBundleTaskRequest);
return invoke(request, new CancelBundleTaskResultStaxUnmarshaller());
}
/**
*
* Deletes a VPN gateway. Use this when you want to delete a VPC and all
* its associated components because you no longer need them. We
* recommend that before you delete a VPN gateway, you detach it from the
* VPC and delete the VPN connection. Note that you don't need to delete
* the VPN gateway if you just want to delete and re-create the VPN
* connection between your VPC and data center.
*
*
* @param deleteVpnGatewayRequest Container for the necessary parameters
* to execute the DeleteVpnGateway service method on AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteVpnGateway(DeleteVpnGatewayRequest deleteVpnGatewayRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DeleteVpnGatewayRequestMarshaller().marshall(deleteVpnGatewayRequest);
invoke(request, null);
}
/**
*
* Cancels one or more Spot Instance requests.
*
*
* Spot Instances are instances that Amazon EC2 starts on your behalf
* when the maximum price that you specify exceeds the current Spot
* Price. Amazon EC2 periodically sets the Spot Price based on available
* Spot Instance capacity and current spot instance requests.
*
*
* For conceptual information about Spot Instances, refer to the Amazon
* Elastic Compute Cloud Developer Guide or Amazon Elastic Compute Cloud
* User Guide .
*
*
*
* @param cancelSpotInstanceRequestsRequest Container for the necessary
* parameters to execute the CancelSpotInstanceRequests service method on
* AmazonEC2.
*
* @return The response from the CancelSpotInstanceRequests service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CancelSpotInstanceRequestsResult cancelSpotInstanceRequests(CancelSpotInstanceRequestsRequest cancelSpotInstanceRequestsRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new CancelSpotInstanceRequestsRequestMarshaller().marshall(cancelSpotInstanceRequestsRequest);
return invoke(request, new CancelSpotInstanceRequestsResultStaxUnmarshaller());
}
/**
*
* Attach a previously created volume to a running instance.
*
*
* @param attachVolumeRequest Container for the necessary parameters to
* execute the AttachVolume service method on AmazonEC2.
*
* @return The response from the AttachVolume service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public AttachVolumeResult attachVolume(AttachVolumeRequest attachVolumeRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new AttachVolumeRequestMarshaller().marshall(attachVolumeRequest);
return invoke(request, new AttachVolumeResultStaxUnmarshaller());
}
/**
*
* Provides details of a user's registered licenses. Zero or more IDs
* may be specified on the call. When one or more license IDs are
* specified, only data for the specified IDs are returned.
*
*
* @param describeLicensesRequest Container for the necessary parameters
* to execute the DescribeLicenses service method on AmazonEC2.
*
* @return The response from the DescribeLicenses service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeLicensesResult describeLicenses(DescribeLicensesRequest describeLicensesRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeLicensesRequestMarshaller().marshall(describeLicensesRequest);
return invoke(request, new DescribeLicensesResultStaxUnmarshaller());
}
/**
*
* The PurchaseReservedInstancesOffering operation purchases a Reserved
* Instance for use with your account. With Amazon EC2 Reserved
* Instances, you purchase the right to launch Amazon EC2 instances for a
* period of time (without getting insufficient capacity errors) and pay
* a lower usage rate for the actual time used.
*
*
* @param purchaseReservedInstancesOfferingRequest Container for the
* necessary parameters to execute the PurchaseReservedInstancesOffering
* service method on AmazonEC2.
*
* @return The response from the PurchaseReservedInstancesOffering
* service method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public PurchaseReservedInstancesOfferingResult purchaseReservedInstancesOffering(PurchaseReservedInstancesOfferingRequest purchaseReservedInstancesOfferingRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new PurchaseReservedInstancesOfferingRequestMarshaller().marshall(purchaseReservedInstancesOfferingRequest);
return invoke(request, new PurchaseReservedInstancesOfferingResultStaxUnmarshaller());
}
/**
*
* Activates a specific number of licenses for a 90-day period.
* Activations can be done against a specific license ID.
*
*
* @param activateLicenseRequest Container for the necessary parameters
* to execute the ActivateLicense service method on AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void activateLicense(ActivateLicenseRequest activateLicenseRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new ActivateLicenseRequestMarshaller().marshall(activateLicenseRequest);
invoke(request, null);
}
/**
*
* The ResetImageAttribute operation resets an attribute of an AMI to
* its default value.
*
*
* NOTE: The productCodes attribute cannot be reset.
*
*
* @param resetImageAttributeRequest Container for the necessary
* parameters to execute the ResetImageAttribute service method on
* AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void resetImageAttribute(ResetImageAttributeRequest resetImageAttributeRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new ResetImageAttributeRequestMarshaller().marshall(resetImageAttributeRequest);
invoke(request, null);
}
/**
*
* Gives you information about your VPN connections.
*
*
* IMPORTANT: We strongly recommend you use HTTPS when calling
* this operation because the response contains sensitive cryptographic
* information for configuring your customer gateway. You can filter the
* results to return information only about VPN connections that match
* criteria you specify. For example, you could ask to get information
* about a particular VPN connection (or all) only if the VPN's state is
* pending or available. You can specify multiple filters (e.g., the VPN
* connection is associated with a particular VPN gateway, and the
* gateway's state is pending or available). The result includes
* information for a particular VPN connection only if the VPN connection
* matches all your filters. If there's no match, no special message is
* returned; the response is simply empty. The following table shows the
* available filters.
*
*
* @param describeVpnConnectionsRequest Container for the necessary
* parameters to execute the DescribeVpnConnections service method on
* AmazonEC2.
*
* @return The response from the DescribeVpnConnections service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVpnConnectionsResult describeVpnConnections(DescribeVpnConnectionsRequest describeVpnConnectionsRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeVpnConnectionsRequestMarshaller().marshall(describeVpnConnectionsRequest);
return invoke(request, new DescribeVpnConnectionsResultStaxUnmarshaller());
}
/**
*
* Create a snapshot of the volume identified by volume ID. A volume
* does not have to be detached at the time the snapshot is taken.
*
*
* NOTE: Snapshot creation requires that the system is in a
* consistent state. For instance, this means that if taking a snapshot
* of a database, the tables must be read-only locked to ensure that the
* snapshot will not contain a corrupted version of the database.
* Therefore, be careful when using this API to ensure that the system
* remains in the consistent state until the create snapshot status has
* returned.
*
*
* @param createSnapshotRequest Container for the necessary parameters to
* execute the CreateSnapshot service method on AmazonEC2.
*
* @return The response from the CreateSnapshot service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateSnapshotResult createSnapshot(CreateSnapshotRequest createSnapshotRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new CreateSnapshotRequestMarshaller().marshall(createSnapshotRequest);
return invoke(request, new CreateSnapshotResultStaxUnmarshaller());
}
/**
*
* Deletes a previously created volume. Once successfully deleted, a
* new volume can be created with the same name.
*
*
* @param deleteVolumeRequest Container for the necessary parameters to
* execute the DeleteVolume service method on AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteVolume(DeleteVolumeRequest deleteVolumeRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DeleteVolumeRequestMarshaller().marshall(deleteVolumeRequest);
invoke(request, null);
}
/**
*
* Adds or remove permission settings for the specified snapshot.
*
*
* @param modifySnapshotAttributeRequest Container for the necessary
* parameters to execute the ModifySnapshotAttribute service method on
* AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void modifySnapshotAttribute(ModifySnapshotAttributeRequest modifySnapshotAttributeRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new ModifySnapshotAttributeRequestMarshaller().marshall(modifySnapshotAttributeRequest);
invoke(request, null);
}
/**
*
* The TerminateInstances operation shuts down one or more instances.
* This operation is idempotent; if you terminate an instance more than
* once, each call will succeed.
*
*
* Terminated instances will remain visible after termination
* (approximately one hour).
*
*
* @param terminateInstancesRequest Container for the necessary
* parameters to execute the TerminateInstances service method on
* AmazonEC2.
*
* @return The response from the TerminateInstances service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public TerminateInstancesResult terminateInstances(TerminateInstancesRequest terminateInstancesRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new TerminateInstancesRequestMarshaller().marshall(terminateInstancesRequest);
return invoke(request, new TerminateInstancesResultStaxUnmarshaller());
}
/**
*
* Deletes the data feed for Spot Instances.
*
*
* For conceptual information about Spot Instances, refer to the Amazon
* Elastic Compute Cloud Developer Guide or Amazon Elastic Compute Cloud
* User Guide .
*
*
*
* @param deleteSpotDatafeedSubscriptionRequest Container for the
* necessary parameters to execute the DeleteSpotDatafeedSubscription
* service method on AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteSpotDatafeedSubscription(DeleteSpotDatafeedSubscriptionRequest deleteSpotDatafeedSubscriptionRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DeleteSpotDatafeedSubscriptionRequestMarshaller().marshall(deleteSpotDatafeedSubscriptionRequest);
invoke(request, null);
}
/**
*
* Gives you information about your VPCs. You can filter the results to
* return information only about VPCs that match criteria you specify.
* For example, you could ask to get information about a particular VPC
* or VPCs (or all your VPCs) only if the VPC's state is available. You
* can specify multiple filters (e.g., the VPC uses one of several sets
* of DHCP options, and the VPC's state is available). The result
* includes information for a particular VPC only if the VPC matches all
* your filters. If there's no match, no special message is returned; the
* response is simply empty. The following table shows the available
* filters.
*
*
* @param describeVpcsRequest Container for the necessary parameters to
* execute the DescribeVpcs service method on AmazonEC2.
*
* @return The response from the DescribeVpcs service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVpcsResult describeVpcs(DescribeVpcsRequest describeVpcsRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeVpcsRequestMarshaller().marshall(describeVpcsRequest);
return invoke(request, new DescribeVpcsResultStaxUnmarshaller());
}
/**
*
* The AssociateAddress operation associates an elastic IP address with
* an instance.
*
*
* If the IP address is currently assigned to another instance, the IP
* address is assigned to the new instance. This is an idempotent
* operation. If you enter it more than once, Amazon EC2 does not return
* an error.
*
*
* @param associateAddressRequest Container for the necessary parameters
* to execute the AssociateAddress service method on AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void associateAddress(AssociateAddressRequest associateAddressRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new AssociateAddressRequestMarshaller().marshall(associateAddressRequest);
invoke(request, null);
}
/**
*
* Deactivates a specific number of licenses. Deactivations can be done
* against a specific license ID after they have persisted for at least a
* 90-day period.
*
*
* @param deactivateLicenseRequest Container for the necessary parameters
* to execute the DeactivateLicense service method on AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deactivateLicense(DeactivateLicenseRequest deactivateLicenseRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DeactivateLicenseRequestMarshaller().marshall(deactivateLicenseRequest);
invoke(request, null);
}
/**
*
* Returns information about an attribute of a snapshot. Only one
* attribute can be specified per call.
*
*
* @param describeSnapshotAttributeRequest Container for the necessary
* parameters to execute the DescribeSnapshotAttribute service method on
* AmazonEC2.
*
* @return The response from the DescribeSnapshotAttribute service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSnapshotAttributeResult describeSnapshotAttribute(DescribeSnapshotAttributeRequest describeSnapshotAttributeRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeSnapshotAttributeRequestMarshaller().marshall(describeSnapshotAttributeRequest);
return invoke(request, new DescribeSnapshotAttributeResultStaxUnmarshaller());
}
/**
*
* Deletes a customer gateway. You must delete the VPN connection before
* deleting the customer gateway.
*
*
* You can have a single active customer gateway per AWS account (active
* means that you've created a VPN connection with that customer
* gateway). AWS might delete any customer gateway you leave inactive for
* an extended period of time.
*
*
* @param deleteCustomerGatewayRequest Container for the necessary
* parameters to execute the DeleteCustomerGateway service method on
* AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteCustomerGateway(DeleteCustomerGatewayRequest deleteCustomerGatewayRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DeleteCustomerGatewayRequestMarshaller().marshall(deleteCustomerGatewayRequest);
invoke(request, null);
}
/**
*
* The DescribeAddresses operation lists elastic IP addresses assigned
* to your account.
*
*
* @param describeAddressesRequest Container for the necessary parameters
* to execute the DescribeAddresses service method on AmazonEC2.
*
* @return The response from the DescribeAddresses service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeAddressesResult describeAddresses(DescribeAddressesRequest describeAddressesRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeAddressesRequestMarshaller().marshall(describeAddressesRequest);
return invoke(request, new DescribeAddressesResultStaxUnmarshaller());
}
/**
*
* The DescribeKeyPairs operation returns information about key pairs
* available to you. If you specify key pairs, information about those
* key pairs is returned. Otherwise, information for all registered key
* pairs is returned.
*
*
* @param describeKeyPairsRequest Container for the necessary parameters
* to execute the DescribeKeyPairs service method on AmazonEC2.
*
* @return The response from the DescribeKeyPairs service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeKeyPairsResult describeKeyPairs(DescribeKeyPairsRequest describeKeyPairsRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeKeyPairsRequestMarshaller().marshall(describeKeyPairsRequest);
return invoke(request, new DescribeKeyPairsResultStaxUnmarshaller());
}
/**
*
* The DescribeImageAttribute operation returns information about an
* attribute of an AMI. Only one attribute can be specified per call.
*
*
* @param describeImageAttributeRequest Container for the necessary
* parameters to execute the DescribeImageAttribute service method on
* AmazonEC2.
*
* @return The response from the DescribeImageAttribute service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeImageAttributeResult describeImageAttribute(DescribeImageAttributeRequest describeImageAttributeRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeImageAttributeRequestMarshaller().marshall(describeImageAttributeRequest);
return invoke(request, new DescribeImageAttributeResultStaxUnmarshaller());
}
/**
*
* The ConfirmProductInstance operation returns true if the specified
* product code is attached to the specified instance. The operation
* returns false if the product code is not attached to the instance.
*
*
* The ConfirmProductInstance operation can only be executed by the
* owner of the AMI. This feature is useful when an AMI owner is
* providing support and wants to verify whether a user's instance is
* eligible.
*
*
* @param confirmProductInstanceRequest Container for the necessary
* parameters to execute the ConfirmProductInstance service method on
* AmazonEC2.
*
* @return The response from the ConfirmProductInstance service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public ConfirmProductInstanceResult confirmProductInstance(ConfirmProductInstanceRequest confirmProductInstanceRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new ConfirmProductInstanceRequestMarshaller().marshall(confirmProductInstanceRequest);
return invoke(request, new ConfirmProductInstanceResultStaxUnmarshaller());
}
/**
*
* Initializes an empty volume of a given size.
*
*
* @param createVolumeRequest Container for the necessary parameters to
* execute the CreateVolume service method on AmazonEC2.
*
* @return The response from the CreateVolume service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateVolumeResult createVolume(CreateVolumeRequest createVolumeRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new CreateVolumeRequestMarshaller().marshall(createVolumeRequest);
return invoke(request, new CreateVolumeResultStaxUnmarshaller());
}
/**
*
* Gives you information about your VPN gateways. You can filter the
* results to return information only about VPN gateways that match
* criteria you specify. For example, you could ask to get information
* about a particular VPN gateway (or all) only if the gateway's state is
* pending or available. You can specify multiple filters (e.g., the VPN
* gateway is in a particular Availability Zone and the gateway's state
* is pending or available). The result includes information for a
* particular VPN gateway only if the gateway matches all your filters.
* If there's no match, no special message is returned; the response is
* simply empty. The following table shows the available filters.
*
*
* @param describeVpnGatewaysRequest Container for the necessary
* parameters to execute the DescribeVpnGateways service method on
* AmazonEC2.
*
* @return The response from the DescribeVpnGateways service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVpnGatewaysResult describeVpnGateways(DescribeVpnGatewaysRequest describeVpnGatewaysRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeVpnGatewaysRequestMarshaller().marshall(describeVpnGatewaysRequest);
return invoke(request, new DescribeVpnGatewaysResultStaxUnmarshaller());
}
/**
*
* Creates a subnet in an existing VPC. You can create up to 20 subnets
* in a VPC. If you add more than one subnet to a VPC, they're set up in
* a star topology with a logical router in the middle. When you create
* each subnet, you provide the VPC ID and the CIDR block you want for
* the subnet. Once you create a subnet, you can't change its CIDR block.
* The subnet's CIDR block can be the same as the VPC's CIDR block
* (assuming you want only a single subnet in the VPC), or a subset of
* the VPC's CIDR block. If you create more than one subnet in a VPC, the
* subnets' CIDR blocks must not overlap. The smallest subnet (and VPC)
* you can create uses a /28 netmask (16 IP addresses), and the largest
* uses a /18 netmask (16,384 IP addresses).
*
*
* IMPORTANT: AWS reserves both the first four and the last IP
* address in each subnet's CIDR block. They're not available for use.
*
*
* @param createSubnetRequest Container for the necessary parameters to
* execute the CreateSubnet service method on AmazonEC2.
*
* @return The response from the CreateSubnet service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateSubnetResult createSubnet(CreateSubnetRequest createSubnetRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new CreateSubnetRequestMarshaller().marshall(createSubnetRequest);
return invoke(request, new CreateSubnetResultStaxUnmarshaller());
}
/**
*
* The DescribeReservedInstancesOfferings operation describes Reserved
* Instance offerings that are available for purchase. With Amazon EC2
* Reserved Instances, you purchase the right to launch Amazon EC2
* instances for a period of time (without getting insufficient capacity
* errors) and pay a lower usage rate for the actual time used.
*
*
* @param describeReservedInstancesOfferingsRequest Container for the
* necessary parameters to execute the DescribeReservedInstancesOfferings
* service method on AmazonEC2.
*
* @return The response from the DescribeReservedInstancesOfferings
* service method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeReservedInstancesOfferingsResult describeReservedInstancesOfferings(DescribeReservedInstancesOfferingsRequest describeReservedInstancesOfferingsRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeReservedInstancesOfferingsRequestMarshaller().marshall(describeReservedInstancesOfferingsRequest);
return invoke(request, new DescribeReservedInstancesOfferingsResultStaxUnmarshaller());
}
/**
*
* Describes the status of the indicated or, in lieu of any specified,
* all volumes belonging to the caller. Volumes that have been deleted
* are not described.
*
*
* @param describeVolumesRequest Container for the necessary parameters
* to execute the DescribeVolumes service method on AmazonEC2.
*
* @return The response from the DescribeVolumes service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVolumesResult describeVolumes(DescribeVolumesRequest describeVolumesRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeVolumesRequestMarshaller().marshall(describeVolumesRequest);
return invoke(request, new DescribeVolumesResultStaxUnmarshaller());
}
/**
*
* Deletes the snapshot identified by snapshotId.
*
*
* @param deleteSnapshotRequest Container for the necessary parameters to
* execute the DeleteSnapshot service method on AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteSnapshot(DeleteSnapshotRequest deleteSnapshotRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DeleteSnapshotRequestMarshaller().marshall(deleteSnapshotRequest);
invoke(request, null);
}
/**
*
* Gives you information about one or more sets of DHCP options. You can
* specify one or more DHCP options set IDs, or no IDs (to describe all
* your sets of DHCP options). The returned information consists of:
*
*
*
* - The DHCP options set ID
* - The options
*
*
*
* @param describeDhcpOptionsRequest Container for the necessary
* parameters to execute the DescribeDhcpOptions service method on
* AmazonEC2.
*
* @return The response from the DescribeDhcpOptions service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeDhcpOptionsResult describeDhcpOptions(DescribeDhcpOptionsRequest describeDhcpOptionsRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeDhcpOptionsRequestMarshaller().marshall(describeDhcpOptionsRequest);
return invoke(request, new DescribeDhcpOptionsResultStaxUnmarshaller());
}
/**
*
* Enables monitoring for a running instance.
*
*
* @param monitorInstancesRequest Container for the necessary parameters
* to execute the MonitorInstances service method on AmazonEC2.
*
* @return The response from the MonitorInstances service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public MonitorInstancesResult monitorInstances(MonitorInstancesRequest monitorInstancesRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new MonitorInstancesRequestMarshaller().marshall(monitorInstancesRequest);
return invoke(request, new MonitorInstancesResultStaxUnmarshaller());
}
/**
*
* The DisassociateAddress operation disassociates the specified elastic
* IP address from the instance to which it is assigned. This is an
* idempotent operation. If you enter it more than once, Amazon EC2 does
* not return an error.
*
*
* @param disassociateAddressRequest Container for the necessary
* parameters to execute the DisassociateAddress service method on
* AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void disassociateAddress(DisassociateAddressRequest disassociateAddressRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DisassociateAddressRequestMarshaller().marshall(disassociateAddressRequest);
invoke(request, null);
}
/**
*
* Creates a PlacementGroup into which multiple Amazon EC2 instances can
* be launched. Users must give the group a name unique within the scope
* of the user account.
*
*
* @param createPlacementGroupRequest Container for the necessary
* parameters to execute the CreatePlacementGroup service method on
* AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void createPlacementGroup(CreatePlacementGroupRequest createPlacementGroupRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new CreatePlacementGroupRequestMarshaller().marshall(createPlacementGroupRequest);
invoke(request, null);
}
/**
*
* The DescribeBundleTasks operation describes in-progress and recent
* bundle tasks. Complete and failed tasks are removed from the list a
* short time after completion. If no bundle ids are given, all bundle
* tasks are returned.
*
*
* @param describeBundleTasksRequest Container for the necessary
* parameters to execute the DescribeBundleTasks service method on
* AmazonEC2.
*
* @return The response from the DescribeBundleTasks service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeBundleTasksResult describeBundleTasks(DescribeBundleTasksRequest describeBundleTasksRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeBundleTasksRequestMarshaller().marshall(describeBundleTasksRequest);
return invoke(request, new DescribeBundleTasksResultStaxUnmarshaller());
}
/**
*
* The BundleInstance operation request that an instance is bundled the
* next time it boots. The bundling process creates a new image from a
* running instance and stores the AMI data in S3. Once bundled, the
* image must be registered in the normal way using the RegisterImage
* API.
*
*
* @param bundleInstanceRequest Container for the necessary parameters to
* execute the BundleInstance service method on AmazonEC2.
*
* @return The response from the BundleInstance service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public BundleInstanceResult bundleInstance(BundleInstanceRequest bundleInstanceRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new BundleInstanceRequestMarshaller().marshall(bundleInstanceRequest);
return invoke(request, new BundleInstanceResultStaxUnmarshaller());
}
/**
*
* Deletes a PlacementGroup from a user's account. Terminate all Amazon
* EC2 instances in the placement group before deletion.
*
*
* @param deletePlacementGroupRequest Container for the necessary
* parameters to execute the DeletePlacementGroup service method on
* AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deletePlacementGroup(DeletePlacementGroupRequest deletePlacementGroupRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DeletePlacementGroupRequestMarshaller().marshall(deletePlacementGroupRequest);
invoke(request, null);
}
/**
*
* The RevokeSecurityGroupIngress operation revokes permissions from a
* security group. The permissions used to revoke must be specified using
* the same values used to grant the permissions.
*
*
* Permissions are specified by IP protocol (TCP, UDP, or ICMP), the
* source of the request (by IP range or an Amazon EC2 user-group pair),
* the source and destination port ranges (for TCP and UDP), and the ICMP
* codes and types (for ICMP).
*
*
* Permission changes are quickly propagated to instances within the
* security group. However, depending on the number of instances in the
* group, a small delay might occur.
*
*
* @param revokeSecurityGroupIngressRequest Container for the necessary
* parameters to execute the RevokeSecurityGroupIngress service method on
* AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void revokeSecurityGroupIngress(RevokeSecurityGroupIngressRequest revokeSecurityGroupIngressRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new RevokeSecurityGroupIngressRequestMarshaller().marshall(revokeSecurityGroupIngressRequest);
invoke(request, null);
}
/**
*
* Deletes a VPC. You must terminate all running instances and delete
* all subnets before deleting the VPC, otherwise Amazon VPC returns an
* error.
*
*
* @param deleteVpcRequest Container for the necessary parameters to
* execute the DeleteVpc service method on AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteVpc(DeleteVpcRequest deleteVpcRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DeleteVpcRequestMarshaller().marshall(deleteVpcRequest);
invoke(request, null);
}
/**
*
* The GetConsoleOutput operation retrieves console output for the
* specified instance.
*
*
* Instance console output is buffered and posted shortly after instance
* boot, reboot, and termination. Amazon EC2 preserves the most recent 64
* KB output which will be available for at least one hour after the most
* recent post.
*
*
* @param getConsoleOutputRequest Container for the necessary parameters
* to execute the GetConsoleOutput service method on AmazonEC2.
*
* @return The response from the GetConsoleOutput service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public GetConsoleOutputResult getConsoleOutput(GetConsoleOutputRequest getConsoleOutputRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new GetConsoleOutputRequestMarshaller().marshall(getConsoleOutputRequest);
return invoke(request, new GetConsoleOutputResultStaxUnmarshaller());
}
/**
*
* The AllocateAddress operation acquires an elastic IP address for use
* with your account.
*
*
* @param allocateAddressRequest Container for the necessary parameters
* to execute the AllocateAddress service method on AmazonEC2.
*
* @return The response from the AllocateAddress service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public AllocateAddressResult allocateAddress(AllocateAddressRequest allocateAddressRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new AllocateAddressRequestMarshaller().marshall(allocateAddressRequest);
return invoke(request, new AllocateAddressResultStaxUnmarshaller());
}
/**
*
* The ModifyImageAttribute operation modifies an attribute of an AMI.
*
*
* @param modifyImageAttributeRequest Container for the necessary
* parameters to execute the ModifyImageAttribute service method on
* AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void modifyImageAttribute(ModifyImageAttributeRequest modifyImageAttributeRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new ModifyImageAttributeRequestMarshaller().marshall(modifyImageAttributeRequest);
invoke(request, null);
}
/**
*
* The ReleaseAddress operation releases an elastic IP address
* associated with your account.
*
*
* NOTE: Releasing an IP address automatically disassociates it
* from any instance with which it is associated. For more information,
* see DisassociateAddress.
*
*
* IMPORTANT: After releasing an elastic IP address, it is
* released to the IP address pool and might no longer be available to
* your account. Make sure to update your DNS records and any servers or
* devices that communicate with the address. If you run this operation
* on an elastic IP address that is already released, the address might
* be assigned to another account which will cause Amazon EC2 to return
* an error.
*
*
* @param releaseAddressRequest Container for the necessary parameters to
* execute the ReleaseAddress service method on AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void releaseAddress(ReleaseAddressRequest releaseAddressRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new ReleaseAddressRequestMarshaller().marshall(releaseAddressRequest);
invoke(request, null);
}
/**
*
* Provides information to AWS about your customer gateway device. The
* customer gateway is the appliance at your end of the VPN connection
* (compared to the VPN gateway, which is the device at the AWS side of
* the VPN connection). You can have a single active customer gateway per
* AWS account (active means that you've created a VPN connection to use
* with the customer gateway). AWS might delete any customer gateway that
* you create with this operation if you leave it inactive for an
* extended period of time.
*
*
* You must provide the Internet-routable IP address of the customer
* gateway's external interface. The IP address must be static.
*
*
* You must also provide the device's Border Gateway Protocol (BGP)
* Autonomous System Number (ASN). You can use an existing ASN assigned
* to your network. If you don't have an ASN already, you can use a
* private ASN (in the 64512 - 65534 range). For more information about
* ASNs, go to
* http://en.wikipedia.org/wiki/Autonomous_system_%28Internet%29 .
*
*
* @param createCustomerGatewayRequest Container for the necessary
* parameters to execute the CreateCustomerGateway service method on
* AmazonEC2.
*
* @return The response from the CreateCustomerGateway service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateCustomerGatewayResult createCustomerGateway(CreateCustomerGatewayRequest createCustomerGatewayRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new CreateCustomerGatewayRequestMarshaller().marshall(createCustomerGatewayRequest);
return invoke(request, new CreateCustomerGatewayResultStaxUnmarshaller());
}
/**
*
* Resets an attribute of an instance to its default value.
*
*
* @param resetInstanceAttributeRequest Container for the necessary
* parameters to execute the ResetInstanceAttribute service method on
* AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void resetInstanceAttribute(ResetInstanceAttributeRequest resetInstanceAttributeRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new ResetInstanceAttributeRequestMarshaller().marshall(resetInstanceAttributeRequest);
invoke(request, null);
}
/**
*
* Creates the data feed for Spot Instances, enabling you to view Spot
* Instance usage logs. You can create one data feed per account.
*
*
* For conceptual information about Spot Instances, refer to the Amazon
* Elastic Compute Cloud Developer Guide or Amazon Elastic Compute Cloud
* User Guide .
*
*
*
* @param createSpotDatafeedSubscriptionRequest Container for the
* necessary parameters to execute the CreateSpotDatafeedSubscription
* service method on AmazonEC2.
*
* @return The response from the CreateSpotDatafeedSubscription service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateSpotDatafeedSubscriptionResult createSpotDatafeedSubscription(CreateSpotDatafeedSubscriptionRequest createSpotDatafeedSubscriptionRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new CreateSpotDatafeedSubscriptionRequestMarshaller().marshall(createSpotDatafeedSubscriptionRequest);
return invoke(request, new CreateSpotDatafeedSubscriptionResultStaxUnmarshaller());
}
/**
*
* The CreateKeyPair operation creates a new 2048 bit RSA key pair and
* returns a unique ID that can be used to reference this key pair when
* launching new instances. For more information, see RunInstances.
*
*
* @param createKeyPairRequest Container for the necessary parameters to
* execute the CreateKeyPair service method on AmazonEC2.
*
* @return The response from the CreateKeyPair service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateKeyPairResult createKeyPair(CreateKeyPairRequest createKeyPairRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new CreateKeyPairRequestMarshaller().marshall(createKeyPairRequest);
return invoke(request, new CreateKeyPairResultStaxUnmarshaller());
}
/**
*
* Returns information about the Amazon EBS snapshots available to you.
* Snapshots available to you include public snapshots available for any
* AWS account to launch, private snapshots you own, and private
* snapshots owned by another AWS account but for which you've been given
* explicit create volume permissions.
*
*
* @param describeSnapshotsRequest Container for the necessary parameters
* to execute the DescribeSnapshots service method on AmazonEC2.
*
* @return The response from the DescribeSnapshots service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSnapshotsResult describeSnapshots(DescribeSnapshotsRequest describeSnapshotsRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeSnapshotsRequestMarshaller().marshall(describeSnapshotsRequest);
return invoke(request, new DescribeSnapshotsResultStaxUnmarshaller());
}
/**
*
* The RegisterImage operation registers an AMI with Amazon EC2. Images
* must be registered before they can be launched. For more information,
* see RunInstances.
*
*
* Each AMI is associated with an unique ID which is provided by the
* Amazon EC2 service through the RegisterImage operation. During
* registration, Amazon EC2 retrieves the specified image manifest from
* Amazon S3 and verifies that the image is owned by the user registering
* the image.
*
*
* The image manifest is retrieved once and stored within the Amazon
* EC2. Any modifications to an image in Amazon S3 invalidates this
* registration. If you make changes to an image, deregister the previous
* image and register the new image. For more information, see
* DeregisterImage.
*
*
* @param registerImageRequest Container for the necessary parameters to
* execute the RegisterImage service method on AmazonEC2.
*
* @return The response from the RegisterImage service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public RegisterImageResult registerImage(RegisterImageRequest registerImageRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new RegisterImageRequestMarshaller().marshall(registerImageRequest);
return invoke(request, new RegisterImageResultStaxUnmarshaller());
}
/**
*
* Deletes a VPN connection. Use this if you want to delete a VPC and
* all its associated components. Another reason to use this operation is
* if you believe the tunnel credentials for your VPN connection have
* been compromised. In that situation, you can delete the VPN connection
* and create a new one that has new keys, without needing to delete the
* VPC or VPN gateway. If you create a new VPN connection, you must
* reconfigure the customer gateway using the new configuration
* information returned with the new VPN connection ID.
*
*
* If you're deleting the VPC and all its associated parts, we recommend
* you detach the VPN gateway from the VPC and delete the VPC before
* deleting the VPN connection.
*
*
* @param deleteVpnConnectionRequest Container for the necessary
* parameters to execute the DeleteVpnConnection service method on
* AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteVpnConnection(DeleteVpnConnectionRequest deleteVpnConnectionRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DeleteVpnConnectionRequestMarshaller().marshall(deleteVpnConnectionRequest);
invoke(request, null);
}
/**
*
* Creates a new VPN connection between an existing VPN gateway and
* customer gateway. The only supported connection type is ipsec.1.
*
*
* The response includes information that you need to configure your
* customer gateway, in XML format. We recommend you use the command line
* version of this operation (ec2-create-vpn-connection), which takes an
* -f option (for format) and returns configuration information formatted
* as expected by the vendor you specified, or in a generic, human
* readable format. For information about the command, go to
* ec2-create-vpn-connection in the Amazon Virtual Private Cloud Command
* Line Reference.
*
*
* IMPORTANT: We strongly recommend you use HTTPS when calling
* this operation because the response contains sensitive cryptographic
* information for configuring your customer gateway. If you decide to
* shut down your VPN connection for any reason and then create a new
* one, you must re-configure your customer gateway with the new
* information returned from this call.
*
*
* @param createVpnConnectionRequest Container for the necessary
* parameters to execute the CreateVpnConnection service method on
* AmazonEC2.
*
* @return The response from the CreateVpnConnection service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateVpnConnectionResult createVpnConnection(CreateVpnConnectionRequest createVpnConnectionRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new CreateVpnConnectionRequestMarshaller().marshall(createVpnConnectionRequest);
return invoke(request, new CreateVpnConnectionResultStaxUnmarshaller());
}
/**
*
* Returns information about an attribute of an instance. Only one
* attribute can be specified per call.
*
*
* @param describeInstanceAttributeRequest Container for the necessary
* parameters to execute the DescribeInstanceAttribute service method on
* AmazonEC2.
*
* @return The response from the DescribeInstanceAttribute service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeInstanceAttributeResult describeInstanceAttribute(DescribeInstanceAttributeRequest describeInstanceAttributeRequest)
throws AmazonServiceException, AmazonClientException {
Request request = new DescribeInstanceAttributeRequestMarshaller().marshall(describeInstanceAttributeRequest);
return invoke(request, new DescribeInstanceAttributeResultStaxUnmarshaller());
}
/**
*
* Returns information about one or more PlacementGroup instances in a
* user's account.
*
*
* @return The response from the DescribePlacementGroups service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribePlacementGroupsResult describePlacementGroups() throws AmazonServiceException, AmazonClientException {
return describePlacementGroups(new DescribePlacementGroupsRequest());
}
/**
*
* The DescribeReservedInstances operation describes Reserved Instances
* that were purchased for use with your account.
*
*
* @return The response from the DescribeReservedInstances service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeReservedInstancesResult describeReservedInstances() throws AmazonServiceException, AmazonClientException {
return describeReservedInstances(new DescribeReservedInstancesRequest());
}
/**
*
* Gives you information about your subnets. You can filter the results
* to return information only about subnets that match criteria you
* specify. For example, you could ask to get information about a
* particular subnet (or all) only if the subnet's state is available.
* You can specify multiple filters (e.g., the subnet is in a particular
* VPC, and the subnet's state is available). The result includes
* information for a particular subnet only if the subnet matches all
* your filters. If there's no match, no special message is returned; the
* response is simply empty. The following table shows the available
* filters.
*
*
* @return The response from the DescribeSubnets service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSubnetsResult describeSubnets() throws AmazonServiceException, AmazonClientException {
return describeSubnets(new DescribeSubnetsRequest());
}
/**
*
* The DescribeAvailabilityZones operation describes availability zones
* that are currently available to the account and their states.
*
*
* Availability zones are not the same across accounts. The availability
* zone us-east-1a for account A is not necessarily the same as
* us-east-1a for account B. Zone assignments are mapped independently
* for each account.
*
*
* @return The response from the DescribeAvailabilityZones service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeAvailabilityZonesResult describeAvailabilityZones() throws AmazonServiceException, AmazonClientException {
return describeAvailabilityZones(new DescribeAvailabilityZonesRequest());
}
/**
*
* The DescribeInstances operation returns information about instances
* that you own.
*
*
* If you specify one or more instance IDs, Amazon EC2 returns
* information for those instances. If you do not specify instance IDs,
* Amazon EC2 returns information for all relevant instances. If you
* specify an invalid instance ID, a fault is returned. If you specify an
* instance that you do not own, it will not be included in the returned
* results.
*
*
* Recently terminated instances might appear in the returned results.
* This interval is usually less than one hour.
*
*
* @return The response from the DescribeInstances service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeInstancesResult describeInstances() throws AmazonServiceException, AmazonClientException {
return describeInstances(new DescribeInstancesRequest());
}
/**
*
* The DescribeImages operation returns information about AMIs, AKIs,
* and ARIs available to the user. Information returned includes image
* type, product codes, architecture, and kernel and RAM disk IDs. Images
* available to the user include public images available for any user to
* launch, private images owned by the user making the request, and
* private images owned by other users for which the user has explicit
* launch permissions.
*
*
* Launch permissions fall into three categories:
*
*
*
* - Public: The owner of the AMI granted launch permissions for the
* AMI to the all group. All users have launch permissions for these
* AMIs.
* - Explicit: The owner of the AMI granted launch permissions to a
* specific user.
* - Implicit: A user has implicit launch permissions for all AMIs he
* or she owns.
*
*
*
* The list of AMIs returned can be modified by specifying AMI IDs, AMI
* owners, or users with launch permissions. If no options are specified,
* Amazon EC2 returns all AMIs for which the user has launch permissions.
*
*
* If you specify one or more AMI IDs, only AMIs that have the specified
* IDs are returned. If you specify an invalid AMI ID, a fault is
* returned. If you specify an AMI ID for which you do not have access,
* it will not be included in the returned results.
*
*
* If you specify one or more AMI owners, only AMIs from the specified
* owners and for which you have access are returned. The results can
* include the account IDs of the specified owners, amazon for AMIs owned
* by Amazon or self for AMIs that you own.
*
*
* If you specify a list of executable users, only users that have
* launch permissions for the AMIs are returned. You can specify account
* IDs (if you own the AMI(s)), self for AMIs for which you own or have
* explicit permissions, or all for public AMIs.
*
*
* NOTE: Deregistered images are included in the returned results
* for an unspecified interval after deregistration.
*
*
* @return The response from the DescribeImages service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeImagesResult describeImages() throws AmazonServiceException, AmazonClientException {
return describeImages(new DescribeImagesRequest());
}
/**
*
*
*
*
* @return The response from the DescribeSpotInstanceRequests service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSpotInstanceRequestsResult describeSpotInstanceRequests() throws AmazonServiceException, AmazonClientException {
return describeSpotInstanceRequests(new DescribeSpotInstanceRequestsRequest());
}
/**
*
* Gives you information about your customer gateways. You can filter
* the results to return information only about customer gateways that
* match criteria you specify. For example, you could ask to get
* information about a particular customer gateway (or all) only if the
* gateway's state is pending or available. You can specify multiple
* filters (e.g., the customer gateway has a particular IP address for
* the Internet-routable external interface, and the gateway's state is
* pending or available). The result includes information for a
* particular customer gateway only if the gateway matches all your
* filters. If there's no match, no special message is returned; the
* response is simply empty. The following table shows the available
* filters.
*
*
* @return The response from the DescribeCustomerGateways service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeCustomerGatewaysResult describeCustomerGateways() throws AmazonServiceException, AmazonClientException {
return describeCustomerGateways(new DescribeCustomerGatewaysRequest());
}
/**
*
* Describes the Spot Price history.
*
*
* Spot Instances are instances that Amazon EC2 starts on your behalf
* when the maximum price that you specify exceeds the current Spot
* Price. Amazon EC2 periodically sets the Spot Price based on available
* Spot Instance capacity and current spot instance requests.
*
*
* For conceptual information about Spot Instances, refer to the Amazon
* Elastic Compute Cloud Developer Guide or Amazon Elastic Compute Cloud
* User Guide .
*
*
*
* @return The response from the DescribeSpotPriceHistory service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSpotPriceHistoryResult describeSpotPriceHistory() throws AmazonServiceException, AmazonClientException {
return describeSpotPriceHistory(new DescribeSpotPriceHistoryRequest());
}
/**
*
* The DescribeRegions operation describes regions zones that are
* currently available to the account.
*
*
* @return The response from the DescribeRegions service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeRegionsResult describeRegions() throws AmazonServiceException, AmazonClientException {
return describeRegions(new DescribeRegionsRequest());
}
/**
*
* The DescribeSecurityGroups operation returns information about
* security groups that you own.
*
*
* If you specify security group names, information about those security
* group is returned. Otherwise, information for all security group is
* returned. If you specify a group that does not exist, a fault is
* returned.
*
*
* @return The response from the DescribeSecurityGroups service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSecurityGroupsResult describeSecurityGroups() throws AmazonServiceException, AmazonClientException {
return describeSecurityGroups(new DescribeSecurityGroupsRequest());
}
/**
*
* Describes the data feed for Spot Instances.
*
*
* For conceptual information about Spot Instances, refer to the Amazon
* Elastic Compute Cloud Developer Guide or Amazon Elastic Compute Cloud
* User Guide .
*
*
*
* @return The response from the DescribeSpotDatafeedSubscription service
* method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSpotDatafeedSubscriptionResult describeSpotDatafeedSubscription() throws AmazonServiceException, AmazonClientException {
return describeSpotDatafeedSubscription(new DescribeSpotDatafeedSubscriptionRequest());
}
/**
*
* Describes the tags for the specified resources.
*
*
* @return The response from the DescribeTags service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeTagsResult describeTags() throws AmazonServiceException, AmazonClientException {
return describeTags(new DescribeTagsRequest());
}
/**
*
* Provides details of a user's registered licenses. Zero or more IDs
* may be specified on the call. When one or more license IDs are
* specified, only data for the specified IDs are returned.
*
*
* @return The response from the DescribeLicenses service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeLicensesResult describeLicenses() throws AmazonServiceException, AmazonClientException {
return describeLicenses(new DescribeLicensesRequest());
}
/**
*
* Gives you information about your VPN connections.
*
*
* IMPORTANT: We strongly recommend you use HTTPS when calling
* this operation because the response contains sensitive cryptographic
* information for configuring your customer gateway. You can filter the
* results to return information only about VPN connections that match
* criteria you specify. For example, you could ask to get information
* about a particular VPN connection (or all) only if the VPN's state is
* pending or available. You can specify multiple filters (e.g., the VPN
* connection is associated with a particular VPN gateway, and the
* gateway's state is pending or available). The result includes
* information for a particular VPN connection only if the VPN connection
* matches all your filters. If there's no match, no special message is
* returned; the response is simply empty. The following table shows the
* available filters.
*
*
* @return The response from the DescribeVpnConnections service method,
* as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVpnConnectionsResult describeVpnConnections() throws AmazonServiceException, AmazonClientException {
return describeVpnConnections(new DescribeVpnConnectionsRequest());
}
/**
*
* Deletes the data feed for Spot Instances.
*
*
* For conceptual information about Spot Instances, refer to the Amazon
* Elastic Compute Cloud Developer Guide or Amazon Elastic Compute Cloud
* User Guide .
*
*
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteSpotDatafeedSubscription() throws AmazonServiceException, AmazonClientException {
deleteSpotDatafeedSubscription(new DeleteSpotDatafeedSubscriptionRequest());
}
/**
*
* Gives you information about your VPCs. You can filter the results to
* return information only about VPCs that match criteria you specify.
* For example, you could ask to get information about a particular VPC
* or VPCs (or all your VPCs) only if the VPC's state is available. You
* can specify multiple filters (e.g., the VPC uses one of several sets
* of DHCP options, and the VPC's state is available). The result
* includes information for a particular VPC only if the VPC matches all
* your filters. If there's no match, no special message is returned; the
* response is simply empty. The following table shows the available
* filters.
*
*
* @return The response from the DescribeVpcs service method, as returned
* by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVpcsResult describeVpcs() throws AmazonServiceException, AmazonClientException {
return describeVpcs(new DescribeVpcsRequest());
}
/**
*
* The DescribeAddresses operation lists elastic IP addresses assigned
* to your account.
*
*
* @return The response from the DescribeAddresses service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeAddressesResult describeAddresses() throws AmazonServiceException, AmazonClientException {
return describeAddresses(new DescribeAddressesRequest());
}
/**
*
* The DescribeKeyPairs operation returns information about key pairs
* available to you. If you specify key pairs, information about those
* key pairs is returned. Otherwise, information for all registered key
* pairs is returned.
*
*
* @return The response from the DescribeKeyPairs service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeKeyPairsResult describeKeyPairs() throws AmazonServiceException, AmazonClientException {
return describeKeyPairs(new DescribeKeyPairsRequest());
}
/**
*
* Gives you information about your VPN gateways. You can filter the
* results to return information only about VPN gateways that match
* criteria you specify. For example, you could ask to get information
* about a particular VPN gateway (or all) only if the gateway's state is
* pending or available. You can specify multiple filters (e.g., the VPN
* gateway is in a particular Availability Zone and the gateway's state
* is pending or available). The result includes information for a
* particular VPN gateway only if the gateway matches all your filters.
* If there's no match, no special message is returned; the response is
* simply empty. The following table shows the available filters.
*
*
* @return The response from the DescribeVpnGateways service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVpnGatewaysResult describeVpnGateways() throws AmazonServiceException, AmazonClientException {
return describeVpnGateways(new DescribeVpnGatewaysRequest());
}
/**
*
* The DescribeReservedInstancesOfferings operation describes Reserved
* Instance offerings that are available for purchase. With Amazon EC2
* Reserved Instances, you purchase the right to launch Amazon EC2
* instances for a period of time (without getting insufficient capacity
* errors) and pay a lower usage rate for the actual time used.
*
*
* @return The response from the DescribeReservedInstancesOfferings
* service method, as returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeReservedInstancesOfferingsResult describeReservedInstancesOfferings() throws AmazonServiceException, AmazonClientException {
return describeReservedInstancesOfferings(new DescribeReservedInstancesOfferingsRequest());
}
/**
*
* Describes the status of the indicated or, in lieu of any specified,
* all volumes belonging to the caller. Volumes that have been deleted
* are not described.
*
*
* @return The response from the DescribeVolumes service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeVolumesResult describeVolumes() throws AmazonServiceException, AmazonClientException {
return describeVolumes(new DescribeVolumesRequest());
}
/**
*
* Gives you information about one or more sets of DHCP options. You can
* specify one or more DHCP options set IDs, or no IDs (to describe all
* your sets of DHCP options). The returned information consists of:
*
*
*
* - The DHCP options set ID
* - The options
*
*
*
* @return The response from the DescribeDhcpOptions service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeDhcpOptionsResult describeDhcpOptions() throws AmazonServiceException, AmazonClientException {
return describeDhcpOptions(new DescribeDhcpOptionsRequest());
}
/**
*
* The DescribeBundleTasks operation describes in-progress and recent
* bundle tasks. Complete and failed tasks are removed from the list a
* short time after completion. If no bundle ids are given, all bundle
* tasks are returned.
*
*
* @return The response from the DescribeBundleTasks service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeBundleTasksResult describeBundleTasks() throws AmazonServiceException, AmazonClientException {
return describeBundleTasks(new DescribeBundleTasksRequest());
}
/**
*
* The AllocateAddress operation acquires an elastic IP address for use
* with your account.
*
*
* @return The response from the AllocateAddress service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public AllocateAddressResult allocateAddress() throws AmazonServiceException, AmazonClientException {
return allocateAddress(new AllocateAddressRequest());
}
/**
*
* Returns information about the Amazon EBS snapshots available to you.
* Snapshots available to you include public snapshots available for any
* AWS account to launch, private snapshots you own, and private
* snapshots owned by another AWS account but for which you've been given
* explicit create volume permissions.
*
*
* @return The response from the DescribeSnapshots service method, as
* returned by AmazonEC2.
*
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonEC2 indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeSnapshotsResult describeSnapshots() throws AmazonServiceException, AmazonClientException {
return describeSnapshots(new DescribeSnapshotsRequest());
}
/**
* Returns additional metadata for a previously executed successful, request, typically used for
* debugging issues where a service isn't acting as expected. This data isn't considered part
* of the result data returned by an operation, so it's available through this separate,
* diagnostic interface.
*
* Response metadata is only cached for a limited period of time, so if you need to access
* this extra diagnostic information for an executed request, you should use this method
* to retrieve it as soon as possible after executing the request.
*
* @param request
* The originally executed request
*
* @return The response metadata for the specified request, or null if none
* is available.
*/
public ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request) {
return client.getResponseMetadataForRequest(request);
}
private X invoke(Request request, Unmarshaller unmarshaller) {
request.setEndpoint(endpoint);
for (Entry entry : request.getOriginalRequest().copyPrivateRequestParameters().entrySet()) {
request.addParameter(entry.getKey(), entry.getValue());
}
// Apply any additional service specific request handlers that need to be run
if (requestHandlers != null) {
for (RequestHandler requestHandler : requestHandlers) {
request = requestHandler.handleRequest(request);
}
}
try {
signer.sign(request);
} catch (SignatureException e) {
throw new AmazonServiceException("Unable to sign request", e);
}
HttpRequest httpRequest = convertToHttpRequest(request, HttpMethodName.POST);
StaxResponseHandler responseHandler = new StaxResponseHandler(unmarshaller);
DefaultErrorResponseHandler errorResponseHandler = new DefaultErrorResponseHandler(exceptionUnmarshallers);
return (X)client.execute(httpRequest, responseHandler, errorResponseHandler);
}
}