com.amazonaws.services.dynamodb.AmazonDynamoDBClient Maven / Gradle / Ivy
/*
* Copyright 2010-2014 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License").
* You may not use this file except in compliance with the License.
* A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
* express or implied. See the License for the specific language governing
* permissions and limitations under the License.
*/
package com.amazonaws.services.dynamodb;
import java.util.ArrayList;
import java.util.List;
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
import com.amazonaws.AmazonClientException;
import com.amazonaws.AmazonServiceException;
import com.amazonaws.AmazonWebServiceClient;
import com.amazonaws.AmazonWebServiceRequest;
import com.amazonaws.AmazonWebServiceResponse;
import com.amazonaws.ClientConfiguration;
import com.amazonaws.Request;
import com.amazonaws.Response;
import com.amazonaws.ResponseMetadata;
import com.amazonaws.auth.AWS4Signer;
import com.amazonaws.auth.AWSCredentials;
import com.amazonaws.auth.AWSCredentialsProvider;
import com.amazonaws.auth.DefaultAWSCredentialsProviderChain;
import com.amazonaws.handlers.HandlerChainFactory;
import com.amazonaws.http.ExecutionContext;
import com.amazonaws.http.HttpResponseHandler;
import com.amazonaws.http.JsonErrorResponseHandler;
import com.amazonaws.http.JsonResponseHandler;
import com.amazonaws.internal.StaticCredentialsProvider;
import com.amazonaws.metrics.RequestMetricCollector;
import com.amazonaws.regions.Region;
import com.amazonaws.services.dynamodb.model.BatchGetItemRequest;
import com.amazonaws.services.dynamodb.model.BatchGetItemResult;
import com.amazonaws.services.dynamodb.model.BatchWriteItemRequest;
import com.amazonaws.services.dynamodb.model.BatchWriteItemResult;
import com.amazonaws.services.dynamodb.model.ConditionalCheckFailedException;
import com.amazonaws.services.dynamodb.model.CreateTableRequest;
import com.amazonaws.services.dynamodb.model.CreateTableResult;
import com.amazonaws.services.dynamodb.model.DeleteItemRequest;
import com.amazonaws.services.dynamodb.model.DeleteItemResult;
import com.amazonaws.services.dynamodb.model.DeleteTableRequest;
import com.amazonaws.services.dynamodb.model.DeleteTableResult;
import com.amazonaws.services.dynamodb.model.DescribeTableRequest;
import com.amazonaws.services.dynamodb.model.DescribeTableResult;
import com.amazonaws.services.dynamodb.model.GetItemRequest;
import com.amazonaws.services.dynamodb.model.GetItemResult;
import com.amazonaws.services.dynamodb.model.InternalServerErrorException;
import com.amazonaws.services.dynamodb.model.LimitExceededException;
import com.amazonaws.services.dynamodb.model.ListTablesRequest;
import com.amazonaws.services.dynamodb.model.ListTablesResult;
import com.amazonaws.services.dynamodb.model.ProvisionedThroughputExceededException;
import com.amazonaws.services.dynamodb.model.PutItemRequest;
import com.amazonaws.services.dynamodb.model.PutItemResult;
import com.amazonaws.services.dynamodb.model.QueryRequest;
import com.amazonaws.services.dynamodb.model.QueryResult;
import com.amazonaws.services.dynamodb.model.ResourceInUseException;
import com.amazonaws.services.dynamodb.model.ResourceNotFoundException;
import com.amazonaws.services.dynamodb.model.ScanRequest;
import com.amazonaws.services.dynamodb.model.ScanResult;
import com.amazonaws.services.dynamodb.model.UpdateItemRequest;
import com.amazonaws.services.dynamodb.model.UpdateItemResult;
import com.amazonaws.services.dynamodb.model.UpdateTableRequest;
import com.amazonaws.services.dynamodb.model.UpdateTableResult;
import com.amazonaws.services.dynamodb.model.transform.BatchGetItemRequestMarshaller;
import com.amazonaws.services.dynamodb.model.transform.BatchGetItemResultJsonUnmarshaller;
import com.amazonaws.services.dynamodb.model.transform.BatchWriteItemRequestMarshaller;
import com.amazonaws.services.dynamodb.model.transform.BatchWriteItemResultJsonUnmarshaller;
import com.amazonaws.services.dynamodb.model.transform.ConditionalCheckFailedExceptionUnmarshaller;
import com.amazonaws.services.dynamodb.model.transform.CreateTableRequestMarshaller;
import com.amazonaws.services.dynamodb.model.transform.CreateTableResultJsonUnmarshaller;
import com.amazonaws.services.dynamodb.model.transform.DeleteItemRequestMarshaller;
import com.amazonaws.services.dynamodb.model.transform.DeleteItemResultJsonUnmarshaller;
import com.amazonaws.services.dynamodb.model.transform.DeleteTableRequestMarshaller;
import com.amazonaws.services.dynamodb.model.transform.DeleteTableResultJsonUnmarshaller;
import com.amazonaws.services.dynamodb.model.transform.DescribeTableRequestMarshaller;
import com.amazonaws.services.dynamodb.model.transform.DescribeTableResultJsonUnmarshaller;
import com.amazonaws.services.dynamodb.model.transform.GetItemRequestMarshaller;
import com.amazonaws.services.dynamodb.model.transform.GetItemResultJsonUnmarshaller;
import com.amazonaws.services.dynamodb.model.transform.InternalServerErrorExceptionUnmarshaller;
import com.amazonaws.services.dynamodb.model.transform.LimitExceededExceptionUnmarshaller;
import com.amazonaws.services.dynamodb.model.transform.ListTablesRequestMarshaller;
import com.amazonaws.services.dynamodb.model.transform.ListTablesResultJsonUnmarshaller;
import com.amazonaws.services.dynamodb.model.transform.ProvisionedThroughputExceededExceptionUnmarshaller;
import com.amazonaws.services.dynamodb.model.transform.PutItemRequestMarshaller;
import com.amazonaws.services.dynamodb.model.transform.PutItemResultJsonUnmarshaller;
import com.amazonaws.services.dynamodb.model.transform.QueryRequestMarshaller;
import com.amazonaws.services.dynamodb.model.transform.QueryResultJsonUnmarshaller;
import com.amazonaws.services.dynamodb.model.transform.ResourceInUseExceptionUnmarshaller;
import com.amazonaws.services.dynamodb.model.transform.ResourceNotFoundExceptionUnmarshaller;
import com.amazonaws.services.dynamodb.model.transform.ScanRequestMarshaller;
import com.amazonaws.services.dynamodb.model.transform.ScanResultJsonUnmarshaller;
import com.amazonaws.services.dynamodb.model.transform.UpdateItemRequestMarshaller;
import com.amazonaws.services.dynamodb.model.transform.UpdateItemResultJsonUnmarshaller;
import com.amazonaws.services.dynamodb.model.transform.UpdateTableRequestMarshaller;
import com.amazonaws.services.dynamodb.model.transform.UpdateTableResultJsonUnmarshaller;
import com.amazonaws.transform.JsonErrorUnmarshaller;
import com.amazonaws.transform.JsonUnmarshallerContext;
import com.amazonaws.transform.Marshaller;
import com.amazonaws.transform.Unmarshaller;
import com.amazonaws.util.AWSRequestMetrics;
import com.amazonaws.util.AWSRequestMetrics.Field;
/**
* Client for accessing AmazonDynamoDB. All service calls made
* using this client are blocking, and will not return until the service call
* completes.
*
*
* Amazon DynamoDB is a fast, highly scalable, highly available, cost-effective non-relational database service.
*
*
* Amazon DynamoDB removes traditional scalability limitations on data storage while maintaining low latency and predictable performance.
*
* @deprecated Use {@link com.amazonaws.services.dynamodbv2.AmazonDynamoDBClient} instead.
*/
@Deprecated
public class AmazonDynamoDBClient extends AmazonWebServiceClient implements AmazonDynamoDB {
/** Provider for AWS credentials. */
private AWSCredentialsProvider awsCredentialsProvider;
private static final Log log = LogFactory.getLog(AmazonDynamoDB.class);
/**
* List of exception unmarshallers for all AmazonDynamoDB exceptions.
*/
protected List exceptionUnmarshallers;
/** AWS signer for authenticating requests. */
private AWS4Signer signer;
/**
* Constructs a new client to invoke service methods on
* AmazonDynamoDB. A credentials provider chain will be used
* that searches for credentials in this order:
*
* - Environment Variables - AWS_ACCESS_KEY_ID and AWS_SECRET_KEY
* - Java System Properties - aws.accessKeyId and aws.secretKey
* - Instance profile credentials delivered through the Amazon EC2 metadata service
*
*
*
* All service calls made using this new client object are blocking, and will not
* return until the service call completes.
*
* @see DefaultAWSCredentialsProviderChain
*/
public AmazonDynamoDBClient() {
this(new DefaultAWSCredentialsProviderChain(), new ClientConfiguration());
}
/**
* Constructs a new client to invoke service methods on
* AmazonDynamoDB. A credentials provider chain will be used
* that searches for credentials in this order:
*
* - Environment Variables - AWS_ACCESS_KEY_ID and AWS_SECRET_KEY
* - Java System Properties - aws.accessKeyId and aws.secretKey
* - Instance profile credentials delivered through the Amazon EC2 metadata service
*
*
*
* All service calls made using this new client object are blocking, and will not
* return until the service call completes.
*
* @param clientConfiguration The client configuration options controlling how this
* client connects to AmazonDynamoDB
* (ex: proxy settings, retry counts, etc.).
*
* @see DefaultAWSCredentialsProviderChain
*/
public AmazonDynamoDBClient(ClientConfiguration clientConfiguration) {
this(new DefaultAWSCredentialsProviderChain(), clientConfiguration);
}
/**
* Constructs a new client to invoke service methods on
* AmazonDynamoDB using the specified AWS account credentials.
*
*
* All service calls made using this new client object are blocking, and will not
* return until the service call completes.
*
* @param awsCredentials The AWS credentials (access key ID and secret key) to use
* when authenticating with AWS services.
*/
public AmazonDynamoDBClient(AWSCredentials awsCredentials) {
this(awsCredentials, new ClientConfiguration());
}
/**
* Constructs a new client to invoke service methods on
* AmazonDynamoDB using the specified AWS account credentials
* and client configuration options.
*
*
* All service calls made using this new client object are blocking, and will not
* return until the service call completes.
*
* @param awsCredentials The AWS credentials (access key ID and secret key) to use
* when authenticating with AWS services.
* @param clientConfiguration The client configuration options controlling how this
* client connects to AmazonDynamoDB
* (ex: proxy settings, retry counts, etc.).
*/
public AmazonDynamoDBClient(AWSCredentials awsCredentials, ClientConfiguration clientConfiguration) {
this(awsCredentials, clientConfiguration, null);
}
/**
* Constructs a new client to invoke service methods on AmazonDynamoDB using
* the specified AWS account credentials, client configuration options and
* request metric collector.
*
*
* All service calls made using this new client object are blocking, and
* will not return until the service call completes.
*
* @param awsCredentials
* The AWS credentials (access key ID and secret key) to use when
* authenticating with AWS services.
* @param clientConfiguration
* The client configuration options controlling how this client
* connects to AmazonDynamoDB (ex: proxy settings, retry counts,
* etc.).
* @param requestMetricCollector
* optional request metric collector to be used at the http
* client level; can be null.
*/
public AmazonDynamoDBClient(AWSCredentials awsCredentials,
ClientConfiguration clientConfiguration,
RequestMetricCollector requestMetricCollector) {
super(adjustClientConfiguration(clientConfiguration), requestMetricCollector);
this.awsCredentialsProvider = new StaticCredentialsProvider(
awsCredentials);
init();
}
/**
* Constructs a new client to invoke service methods on
* AmazonDynamoDB using the specified AWS account credentials provider.
*
*
* All service calls made using this new client object are blocking, and will not
* return until the service call completes.
*
* @param awsCredentialsProvider
* The AWS credentials provider which will provide credentials
* to authenticate requests with AWS services.
*/
public AmazonDynamoDBClient(AWSCredentialsProvider awsCredentialsProvider) {
this(awsCredentialsProvider, new ClientConfiguration());
}
/**
* Constructs a new client to invoke service methods on
* AmazonDynamoDB using the specified AWS account credentials
* provider and client configuration options.
*
*
* All service calls made using this new client object are blocking, and will not
* return until the service call completes.
*
* @param awsCredentialsProvider
* The AWS credentials provider which will provide credentials
* to authenticate requests with AWS services.
* @param clientConfiguration The client configuration options controlling how this
* client connects to AmazonDynamoDB
* (ex: proxy settings, retry counts, etc.).
*/
public AmazonDynamoDBClient(AWSCredentialsProvider awsCredentialsProvider, ClientConfiguration clientConfiguration) {
this(awsCredentialsProvider, clientConfiguration, null);
}
/**
* Constructs a new client to invoke service methods on
* AmazonDynamoDB using the specified AWS account credentials
* provider and client configuration options.
*
*
* All service calls made using this new client object are blocking, and will not
* return until the service call completes.
*
* @param awsCredentialsProvider
* The AWS credentials provider which will provide credentials
* to authenticate requests with AWS services.
* @param clientConfiguration The client configuration options controlling how this
* client connects to AmazonDynamoDB
* (ex: proxy settings, retry counts, etc.).
* @param requestMetricCollector
* optional request metric collector to be used at the http
* client level; can be null.
*/
public AmazonDynamoDBClient(AWSCredentialsProvider awsCredentialsProvider,
ClientConfiguration clientConfiguration,
RequestMetricCollector requestMetricCollector) {
super(adjustClientConfiguration(clientConfiguration), requestMetricCollector);
this.awsCredentialsProvider = awsCredentialsProvider;
init();
}
private void init() {
exceptionUnmarshallers = new ArrayList();
exceptionUnmarshallers.add(new LimitExceededExceptionUnmarshaller());
exceptionUnmarshallers.add(new InternalServerErrorExceptionUnmarshaller());
exceptionUnmarshallers.add(new ProvisionedThroughputExceededExceptionUnmarshaller());
exceptionUnmarshallers.add(new ResourceInUseExceptionUnmarshaller());
exceptionUnmarshallers.add(new ConditionalCheckFailedExceptionUnmarshaller());
exceptionUnmarshallers.add(new ResourceNotFoundExceptionUnmarshaller());
exceptionUnmarshallers.add(new JsonErrorUnmarshaller());
setEndpoint("dynamodb.us-east-1.amazonaws.com/");
signer = new AWS4Signer();
signer.setServiceName("dynamodb");
HandlerChainFactory chainFactory = new HandlerChainFactory();
requestHandler2s.addAll(chainFactory.newRequestHandlerChain(
"/com/amazonaws/services/dynamodb/request.handlers"));
}
private static ClientConfiguration adjustClientConfiguration(ClientConfiguration orig) {
ClientConfiguration config = orig;
if (config.getRetryPolicy() == com.amazonaws.retry.PredefinedRetryPolicies.DEFAULT) {
config = new ClientConfiguration(orig);
config.setRetryPolicy(
com.amazonaws.retry.PredefinedRetryPolicies.DYNAMODB_DEFAULT);
}
return config;
}
/**
*
* Retrieves a paginated list of table names created by the AWS Account
* of the caller in the AWS Region (e.g. us-east-1 ).
*
*
* @param listTablesRequest Container for the necessary parameters to
* execute the ListTables service method on AmazonDynamoDB.
*
* @return The response from the ListTables service method, as returned
* by AmazonDynamoDB.
*
* @throws InternalServerErrorException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonDynamoDB indicating
* either a problem with the data in the request, or a server side issue.
*/
public ListTablesResult listTables(ListTablesRequest listTablesRequest)
throws AmazonServiceException, AmazonClientException {
ExecutionContext executionContext = createExecutionContext(listTablesRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
Request request = marshall(listTablesRequest,
new ListTablesRequestMarshaller(),
executionContext.getAwsRequestMetrics());
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
Unmarshaller unmarshaller = new ListTablesResultJsonUnmarshaller();
JsonResponseHandler responseHandler = new JsonResponseHandler(unmarshaller);
return invoke(request, responseHandler, executionContext);
}
/**
*
* Gets the values of one or more items and its attributes by primary key
* (composite primary key, only).
*
*
* Narrow the scope of the query using comparison operators on the
* RangeKeyValue of the composite key. Use the
* ScanIndexForward parameter to get results in forward or
* reverse order by range key.
*
*
* @param queryRequest Container for the necessary parameters to execute
* the Query service method on AmazonDynamoDB.
*
* @return The response from the Query service method, as returned by
* AmazonDynamoDB.
*
* @throws ProvisionedThroughputExceededException
* @throws InternalServerErrorException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonDynamoDB indicating
* either a problem with the data in the request, or a server side issue.
*/
public QueryResult query(QueryRequest queryRequest)
throws AmazonServiceException, AmazonClientException {
ExecutionContext executionContext = createExecutionContext(queryRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
Request request = marshall(queryRequest,
new QueryRequestMarshaller(),
executionContext.getAwsRequestMetrics());
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
Unmarshaller unmarshaller = new QueryResultJsonUnmarshaller();
JsonResponseHandler responseHandler = new JsonResponseHandler(unmarshaller);
return invoke(request, responseHandler, executionContext);
}
/**
*
* Allows to execute a batch of Put and/or Delete Requests for many
* tables in a single call. A total of 25 requests are allowed.
*
*
* There are no transaction guarantees provided by this API. It does not
* allow conditional puts nor does it support return values.
*
*
* @param batchWriteItemRequest Container for the necessary parameters to
* execute the BatchWriteItem service method on AmazonDynamoDB.
*
* @return The response from the BatchWriteItem service method, as
* returned by AmazonDynamoDB.
*
* @throws LimitExceededException
* @throws ProvisionedThroughputExceededException
* @throws InternalServerErrorException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonDynamoDB indicating
* either a problem with the data in the request, or a server side issue.
*/
public BatchWriteItemResult batchWriteItem(BatchWriteItemRequest batchWriteItemRequest)
throws AmazonServiceException, AmazonClientException {
ExecutionContext executionContext = createExecutionContext(batchWriteItemRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
Request request = marshall(
batchWriteItemRequest, new BatchWriteItemRequestMarshaller(),
executionContext.getAwsRequestMetrics());
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
Unmarshaller unmarshaller = new BatchWriteItemResultJsonUnmarshaller();
JsonResponseHandler responseHandler = new JsonResponseHandler(unmarshaller);
return invoke(request, responseHandler, executionContext);
}
/**
*
* Edits an existing item's attributes.
*
*
* You can perform a conditional update (insert a new attribute
* name-value pair if it doesn't exist, or replace an existing name-value
* pair if it has certain expected attribute values).
*
*
* @param updateItemRequest Container for the necessary parameters to
* execute the UpdateItem service method on AmazonDynamoDB.
*
* @return The response from the UpdateItem service method, as returned
* by AmazonDynamoDB.
*
* @throws LimitExceededException
* @throws ProvisionedThroughputExceededException
* @throws ConditionalCheckFailedException
* @throws InternalServerErrorException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonDynamoDB indicating
* either a problem with the data in the request, or a server side issue.
*/
public UpdateItemResult updateItem(UpdateItemRequest updateItemRequest)
throws AmazonServiceException, AmazonClientException {
ExecutionContext executionContext = createExecutionContext(updateItemRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
Request request = marshall(updateItemRequest,
new UpdateItemRequestMarshaller(),
executionContext.getAwsRequestMetrics());
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
Unmarshaller unmarshaller = new UpdateItemResultJsonUnmarshaller();
JsonResponseHandler responseHandler = new JsonResponseHandler(unmarshaller);
return invoke(request, responseHandler, executionContext);
}
/**
*
* Creates a new item, or replaces an old item with a new item (including
* all the attributes).
*
*
* If an item already exists in the specified table with the same primary
* key, the new item completely replaces the existing item. You can
* perform a conditional put (insert a new item if one with the specified
* primary key doesn't exist), or replace an existing item if it has
* certain attribute values.
*
*
* @param putItemRequest Container for the necessary parameters to
* execute the PutItem service method on AmazonDynamoDB.
*
* @return The response from the PutItem service method, as returned by
* AmazonDynamoDB.
*
* @throws LimitExceededException
* @throws ProvisionedThroughputExceededException
* @throws ConditionalCheckFailedException
* @throws InternalServerErrorException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonDynamoDB indicating
* either a problem with the data in the request, or a server side issue.
*/
public PutItemResult putItem(PutItemRequest putItemRequest)
throws AmazonServiceException, AmazonClientException {
ExecutionContext executionContext = createExecutionContext(putItemRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
Request request = marshall(putItemRequest,
new PutItemRequestMarshaller(),
executionContext.getAwsRequestMetrics());
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
Unmarshaller unmarshaller = new PutItemResultJsonUnmarshaller();
JsonResponseHandler responseHandler = new JsonResponseHandler(unmarshaller);
return invoke(request, responseHandler, executionContext);
}
/**
*
* Retrieves information about the table, including the current status of
* the table, the primary key schema and when the table was created.
*
*
* If the table does not exist, Amazon DynamoDB returns a
* ResourceNotFoundException .
*
*
* @param describeTableRequest Container for the necessary parameters to
* execute the DescribeTable service method on AmazonDynamoDB.
*
* @return The response from the DescribeTable service method, as
* returned by AmazonDynamoDB.
*
* @throws InternalServerErrorException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonDynamoDB indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeTableResult describeTable(DescribeTableRequest describeTableRequest)
throws AmazonServiceException, AmazonClientException {
ExecutionContext executionContext = createExecutionContext(describeTableRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
Request request = marshall(describeTableRequest,
new DescribeTableRequestMarshaller(),
executionContext.getAwsRequestMetrics());
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
Unmarshaller unmarshaller = new DescribeTableResultJsonUnmarshaller();
JsonResponseHandler responseHandler = new JsonResponseHandler(unmarshaller);
return invoke(request, responseHandler, executionContext);
}
/**
*
* Retrieves one or more items and its attributes by performing a full
* scan of a table.
*
*
* Provide a ScanFilter to get more specific results.
*
*
* @param scanRequest Container for the necessary parameters to execute
* the Scan service method on AmazonDynamoDB.
*
* @return The response from the Scan service method, as returned by
* AmazonDynamoDB.
*
* @throws ProvisionedThroughputExceededException
* @throws InternalServerErrorException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonDynamoDB indicating
* either a problem with the data in the request, or a server side issue.
*/
public ScanResult scan(ScanRequest scanRequest)
throws AmazonServiceException, AmazonClientException {
ExecutionContext executionContext = createExecutionContext(scanRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
Request request = marshall(scanRequest,
new ScanRequestMarshaller(),
executionContext.getAwsRequestMetrics());
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
Unmarshaller unmarshaller = new ScanResultJsonUnmarshaller();
JsonResponseHandler responseHandler = new JsonResponseHandler(unmarshaller);
return invoke(request, responseHandler, executionContext);
}
/**
*
* Adds a new table to your account.
*
*
* The table name must be unique among those associated with the AWS
* Account issuing the request, and the AWS Region that receives the
* request (e.g. us-east-1 ).
*
*
* The CreateTable operation triggers an asynchronous
* workflow to begin creating the table. Amazon DynamoDB immediately
* returns the state of the table ( CREATING ) until the
* table is in the ACTIVE state. Once the table is in the
* ACTIVE state, you can perform data plane operations.
*
*
* @param createTableRequest Container for the necessary parameters to
* execute the CreateTable service method on AmazonDynamoDB.
*
* @return The response from the CreateTable service method, as returned
* by AmazonDynamoDB.
*
* @throws ResourceInUseException
* @throws LimitExceededException
* @throws InternalServerErrorException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonDynamoDB indicating
* either a problem with the data in the request, or a server side issue.
*/
public CreateTableResult createTable(CreateTableRequest createTableRequest)
throws AmazonServiceException, AmazonClientException {
ExecutionContext executionContext = createExecutionContext(createTableRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
Request request = marshall(createTableRequest,
new CreateTableRequestMarshaller(),
executionContext.getAwsRequestMetrics());
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
Unmarshaller unmarshaller = new CreateTableResultJsonUnmarshaller();
JsonResponseHandler responseHandler = new JsonResponseHandler(unmarshaller);
return invoke(request, responseHandler, executionContext);
}
/**
*
* Updates the provisioned throughput for the given table.
*
*
* Setting the throughput for a table helps you manage performance and is
* part of the Provisioned Throughput feature of Amazon DynamoDB.
*
*
* @param updateTableRequest Container for the necessary parameters to
* execute the UpdateTable service method on AmazonDynamoDB.
*
* @return The response from the UpdateTable service method, as returned
* by AmazonDynamoDB.
*
* @throws ResourceInUseException
* @throws LimitExceededException
* @throws InternalServerErrorException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonDynamoDB indicating
* either a problem with the data in the request, or a server side issue.
*/
public UpdateTableResult updateTable(UpdateTableRequest updateTableRequest)
throws AmazonServiceException, AmazonClientException {
ExecutionContext executionContext = createExecutionContext(updateTableRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
Request request = marshall(updateTableRequest,
new UpdateTableRequestMarshaller(),
executionContext.getAwsRequestMetrics());
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
Unmarshaller unmarshaller = new UpdateTableResultJsonUnmarshaller();
JsonResponseHandler responseHandler = new JsonResponseHandler(unmarshaller);
return invoke(request, responseHandler, executionContext);
}
/**
*
* Deletes a table and all of its items.
*
*
* If the table is in the ACTIVE state, you can delete it.
* If a table is in CREATING or UPDATING states
* then Amazon DynamoDB returns a ResourceInUseException .
* If the specified table does not exist, Amazon DynamoDB returns a
* ResourceNotFoundException .
*
*
* @param deleteTableRequest Container for the necessary parameters to
* execute the DeleteTable service method on AmazonDynamoDB.
*
* @return The response from the DeleteTable service method, as returned
* by AmazonDynamoDB.
*
* @throws ResourceInUseException
* @throws LimitExceededException
* @throws InternalServerErrorException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonDynamoDB indicating
* either a problem with the data in the request, or a server side issue.
*/
public DeleteTableResult deleteTable(DeleteTableRequest deleteTableRequest)
throws AmazonServiceException, AmazonClientException {
ExecutionContext executionContext = createExecutionContext(deleteTableRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
Request request = marshall(deleteTableRequest,
new DeleteTableRequestMarshaller(),
executionContext.getAwsRequestMetrics());
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
Unmarshaller unmarshaller = new DeleteTableResultJsonUnmarshaller();
JsonResponseHandler responseHandler = new JsonResponseHandler(unmarshaller);
return invoke(request, responseHandler, executionContext);
}
/**
*
* Deletes a single item in a table by primary key.
*
*
* You can perform a conditional delete operation that deletes the item
* if it exists, or if it has an expected attribute value.
*
*
* @param deleteItemRequest Container for the necessary parameters to
* execute the DeleteItem service method on AmazonDynamoDB.
*
* @return The response from the DeleteItem service method, as returned
* by AmazonDynamoDB.
*
* @throws LimitExceededException
* @throws ProvisionedThroughputExceededException
* @throws ConditionalCheckFailedException
* @throws InternalServerErrorException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonDynamoDB indicating
* either a problem with the data in the request, or a server side issue.
*/
public DeleteItemResult deleteItem(DeleteItemRequest deleteItemRequest)
throws AmazonServiceException, AmazonClientException {
ExecutionContext executionContext = createExecutionContext(deleteItemRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
Request request = marshall(deleteItemRequest,
new DeleteItemRequestMarshaller(),
executionContext.getAwsRequestMetrics());
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
Unmarshaller unmarshaller = new DeleteItemResultJsonUnmarshaller();
JsonResponseHandler responseHandler = new JsonResponseHandler(unmarshaller);
return invoke(request, responseHandler, executionContext);
}
/**
*
* Retrieves a set of Attributes for an item that matches the primary
* key.
*
*
* The GetItem operation provides an eventually-consistent
* read by default. If eventually-consistent reads are not acceptable for
* your application, use ConsistentRead . Although this
* operation might take longer than a standard read, it always returns
* the last updated value.
*
*
* @param getItemRequest Container for the necessary parameters to
* execute the GetItem service method on AmazonDynamoDB.
*
* @return The response from the GetItem service method, as returned by
* AmazonDynamoDB.
*
* @throws ProvisionedThroughputExceededException
* @throws InternalServerErrorException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonDynamoDB indicating
* either a problem with the data in the request, or a server side issue.
*/
public GetItemResult getItem(GetItemRequest getItemRequest)
throws AmazonServiceException, AmazonClientException {
ExecutionContext executionContext = createExecutionContext(getItemRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
Request request = marshall(getItemRequest,
new GetItemRequestMarshaller(),
executionContext.getAwsRequestMetrics());
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
Unmarshaller unmarshaller = new GetItemResultJsonUnmarshaller();
JsonResponseHandler responseHandler = new JsonResponseHandler(unmarshaller);
return invoke(request, responseHandler, executionContext);
}
/**
*
* Retrieves the attributes for multiple items from multiple tables using
* their primary keys.
*
*
* The maximum number of item attributes that can be retrieved for a
* single operation is 100. Also, the number of items retrieved is
* constrained by a 1 MB the size limit. If the response size limit is
* exceeded or a partial result is returned due to an internal processing
* failure, Amazon DynamoDB returns an UnprocessedKeys value
* so you can retry the operation starting with the next item to get.
*
*
* Amazon DynamoDB automatically adjusts the number of items returned per
* page to enforce this limit. For example, even if you ask to retrieve
* 100 items, but each individual item is 50k in size, the system returns
* 20 items and an appropriate UnprocessedKeys value so you
* can get the next page of results. If necessary, your application needs
* its own logic to assemble the pages of results into one set.
*
*
* @param batchGetItemRequest Container for the necessary parameters to
* execute the BatchGetItem service method on AmazonDynamoDB.
*
* @return The response from the BatchGetItem service method, as returned
* by AmazonDynamoDB.
*
* @throws ProvisionedThroughputExceededException
* @throws InternalServerErrorException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonDynamoDB indicating
* either a problem with the data in the request, or a server side issue.
*/
public BatchGetItemResult batchGetItem(BatchGetItemRequest batchGetItemRequest)
throws AmazonServiceException, AmazonClientException {
ExecutionContext executionContext = createExecutionContext(batchGetItemRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
Request request = marshall(batchGetItemRequest,
new BatchGetItemRequestMarshaller(),
executionContext.getAwsRequestMetrics());
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
Unmarshaller unmarshaller = new BatchGetItemResultJsonUnmarshaller();
JsonResponseHandler responseHandler = new JsonResponseHandler(unmarshaller);
return invoke(request, responseHandler, executionContext);
}
/**
*
* Retrieves a paginated list of table names created by the AWS Account
* of the caller in the AWS Region (e.g. us-east-1 ).
*
*
* @return The response from the ListTables service method, as returned
* by AmazonDynamoDB.
*
* @throws InternalServerErrorException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonDynamoDB indicating
* either a problem with the data in the request, or a server side issue.
*/
public ListTablesResult listTables() throws AmazonServiceException, AmazonClientException {
return listTables(new ListTablesRequest());
}
/**
* Overrides the default endpoint for this client ("http://dynamodb.us-east-1.amazonaws.com/") and explicitly provides
* an AWS region ID and AWS service name to use when the client calculates a signature
* for requests. In almost all cases, this region ID and service name
* are automatically determined from the endpoint, and callers should use the simpler
* one-argument form of setEndpoint instead of this method.
*
* This method is not threadsafe. Endpoints should be configured when the
* client is created and before any service requests are made. Changing it
* afterwards creates inevitable race conditions for any service requests in
* transit.
*
* Callers can pass in just the endpoint (ex: "dynamodb.us-east-1.amazonaws.com/") or a full
* URL, including the protocol (ex: "http://dynamodb.us-east-1.amazonaws.com/"). If the
* protocol is not specified here, the default protocol from this client's
* {@link ClientConfiguration} will be used, which by default is HTTPS.
*
* For more information on using AWS regions with the AWS SDK for Java, and
* a complete list of all available endpoints for all AWS services, see:
*
* http://developer.amazonwebservices.com/connect/entry.jspa?externalID=3912
*
* @param endpoint
* The endpoint (ex: "dynamodb.us-east-1.amazonaws.com/") or a full URL,
* including the protocol (ex: "http://dynamodb.us-east-1.amazonaws.com/") of
* the region specific AWS endpoint this client will communicate
* with.
* @param serviceName
* The name of the AWS service to use when signing requests.
* @param regionId
* The ID of the region in which this service resides.
*
* @throws IllegalArgumentException
* If any problems are detected with the specified endpoint.
* @see AmazonDynamoDB#setRegion(Region)
*/
public void setEndpoint(String endpoint, String serviceName, String regionId) throws IllegalArgumentException {
setEndpoint(endpoint);
signer.setServiceName(serviceName);
signer.setRegionName(regionId);
}
@Override
protected String getServiceAbbreviation() {
return "dynamodb";
}
/**
* Returns additional metadata for a previously executed successful, request, typically used for
* debugging issues where a service isn't acting as expected. This data isn't considered part
* of the result data returned by an operation, so it's available through this separate,
* diagnostic interface.
*
* Response metadata is only cached for a limited period of time, so if you need to access
* this extra diagnostic information for an executed request, you should use this method
* to retrieve it as soon as possible after executing the request.
*
* @param request
* The originally executed request
*
* @return The response metadata for the specified request, or null if none
* is available.
*/
public ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request) {
return client.getResponseMetadataForRequest(request);
}
private X invoke(Request request,
HttpResponseHandler> responseHandler,
ExecutionContext executionContext) throws AmazonClientException {
request.setEndpoint(endpoint);
request.setTimeOffset(timeOffset);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
AWSCredentials credentials;
awsRequestMetrics.startEvent(Field.CredentialsRequestTime);
try {
credentials = awsCredentialsProvider.getCredentials();
} finally {
awsRequestMetrics.endEvent(Field.CredentialsRequestTime);
}
AmazonWebServiceRequest originalRequest = request.getOriginalRequest();
if (originalRequest != null && originalRequest.getRequestCredentials() != null) {
credentials = originalRequest.getRequestCredentials();
}
executionContext.setSigner(signer);
executionContext.setCredentials(credentials);
JsonErrorResponseHandler errorResponseHandler = new JsonErrorResponseHandler(exceptionUnmarshallers);
Response result = client.execute(request, responseHandler,
errorResponseHandler, executionContext);
awsRequestMetrics.log();
return result.getAwsResponse();
}
/**
* Returns a {@link Request} marshalled from the given AWS request using
* the specified marshaller, recording the respective
* {@link Field#RequestMarshallTime} predefined metrics.
*/
private Request marshall(
T awsRequest,
Marshaller, T> marshaller,
AWSRequestMetrics awsRequestMetrics) {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
return marshaller.marshall(awsRequest);
} catch (AmazonClientException ex) {
throw ex;
} catch (Exception ex) {
throw new AmazonClientException(ex.getMessage(), ex);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
}
}