com.android.dx.rop.package-info Maven / Gradle / Ivy
Show all versions of builder Show documentation
/*
* Copyright (C) 2008 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package com.android.dx.rop;
/**
* An Introduction to Rop Form
*
* This package contains classes associated with dx's {@code Rop}
* intermediate form.
*
* The Rop form is intended to represent the instructions and the control-flow
* graph in a reasonably programmatically useful form while closely mirroring
* the dex instruction set.
*
*
Key Classes
*
*
* - {@link RopMethod}, the representation of an individual method
*
- {@link BasicBlock} and its per-method container, {@link BasicBlockList},
* the representation of control flow elements.
*
- {@link Insn} and its subclasses along with its per-basic block
* container {@link InsnList}. {@code Insn} instances represent
* individual instructions in the abstract register machine.
*
- {@link RegisterSpec} and its container {@link RegisterSpecList}. A
* register spec encodes register number, register width, type information,
* and potentially local variable information as well for instruction sources
* and results.
*
- {@link Rop} instances represent opcodes in the abstract machine. Many
* {@code Rop} instances are singletons defined in static fields in
* {@link Rops}. The rest are constructed dynamically using static methods
* in {@code Rops}
*
- {@link RegOps} lists numeric constants for the opcodes
*
- {@link Constant} and its subclasses represent constant data values
* that opcodes may refer to.
*
- {@link Type} instances represent the core data types that can be
* handled by the abstract machine.
*
- The {@link TypeBearer} interface is implemented by classes that
* represent a core data type, but may also have secondary information
* (such as constant value) associated with them.
*
*
* Control-Flow Graph
*
* Each method is separated into a list of basic blocks. For the most part,
* basic blocks are referred to by a positive integer
* {@link BasicBlock#getLabel label}, which is always unique per method. The
* label value is typically derived from a bytecode address from the source
* bytecode. Blocks that don't originate directly from source bytecode have
* labels generated for them in a mostly arbitrary order.
*
* Blocks are referred to by their label, for the most part, because
* {@code BasicBlock} instances are immutable and thus any modification to
* the control flow graph or the instruction list results in replacement
* instances (with identical labels) being created.
*
* A method has a single {@link RopMethod#getFirstLabel entry block} and 0
* to N {@link RopMethod#getExitPredecessors exit predecessor blocks} which
* will return. All blocks that are not the entry block will have at least
* one predecessor (or are unreachable and should be removed from the block
* list). All blocks that are not exit predecessors must have at least one
* successor.
*
* Since all blocks must branch, all blocks must have, as their final
* instruction, an instruction whose opcode has a {@link Rop#getBranchingness
* branchingness} other than {@link Rop.BRANCH_NONE}. Furthermore, branching
* instructions may only be the final instruction in any basic block. If
* no other terminating opcode is appropriate, use a {@link Rops#GOTO GOTO}.
*
* Typically a block will have a {@link BasicBlock#getPrimarySuccessor
* primary successor} which distinguishes a particular control flow path.
* For {Rops#isCallLike}call or call-like} opcodes, this is the path taken
* in the non-exceptional case, where all other successors represent
* various exception paths. For comparison operators such as
* {@link Rops#IF_EQZ_INT}, the primary successor represents the path taken
* if the condition evaluates to false. For {@link SwitchInsn switch
* instructions}, the primary successor is the default case.
*
* A basic block's successor list is ordered and may refer to unique labels
* multiple times. For example, if a switch statement contains multiple case
* statements for the same code path, a single basic block will likely
* appear in the successor list multiple times. In general, the
* significance of the successor list's order (like the significance of
* the primary successor) is a property of the final instruction of the basic
* block. A basic block containing a {@link ThrowingInsn}, for example, has
* its successor list in an order identical to the
* {@link ThrowingInsn#getCatches} instruction's catches list, with the
* primary successor (the no-exception case) listed at the end.
*
* It is legal for a basic block to have no primary successor. An obvious
* example of this is a block that terminates in a {@link Rops#THROW throw}
* instruction where a catch block exists inside the current method for that
* exception class. Since the only possible path is the exception path, only
* the exception path (which cannot be a primary successor) is a successor.
* An example of this is shown in {@code dx/tests/092-ssa-cfg-edge-cases}.
*
*
Rop Instructions
*
* move-result and move-result-pseudo
*
* An instruction that may throw an exception may not specify a result. This
* is necessary because the result register will not be assigned to if an
* exception occurs while processing said instruction and a result assignment
* may not occur. Since result assignments only occur in the non-exceptional
* case, the result assignments for throwing instructions can be said to occur
* at the beginning of the primary successor block rather than at the end of
* the current block. The Rop form represents the result assignments this way.
* Throwing instructions may not directly specify results. Instead, result
* assignments are represented by {@link
* Rops#MOVE_RESULT move-result} or {@link Rops#MOVE_RESULT_PSEUDO
* move-result-pseudo} instructions at the top of the primary successor block.
*
* Only a single {@code move-result} or {@code move-result-pseudo}
* may exist in any block and it must be exactly the first instruction in the
* block.
*
* A {@code move-result} instruction is used for the results of call-like
* instructions. If the value produced by a {@code move-result} is not
* used by the method, it may be eliminated as dead code.
*
* A {@code move-result-pseudo} instruction is used for the results of
* non-call-like throwing instructions. It may never be considered dead code
* since the final dex instruction will always indicate a result register.
* If a required {@code move-result-pseudo} instruction is not found
* during conversion to dex bytecode, an exception will be thrown.
*
* move-exception
*
* A {@link RegOps.MOVE_EXCEPTION move-exception} instruction may appear at
* the start of a catch block, and represents the obtaining of the thrown
* exception instance. It may only occur as the first instruction in a
* basic block, and any basic block in which it occurs must be reachable only
* as an exception successor.
*
* move-param
*
* A {@link RegOps.MOVE_PARAM move-param} instruction represents a method
* parameter. Every {@code move-param} instruction is a
* {@link PlainCstInsn}. The index of the method parameter they refer to is
* carried as the {@link CstInteger integer constant} associated with the
* instruction.
*
* Any number of {@code move-param} instructions referring to the same
* parameter index may be included in a method's instruction lists. They
* have no restrictions on placement beyond those of any other
* {@link Rop.BRANCH_NONE} instruction. Note that the SSA optimizer arranges the
* parameter assignments to align with the dex bytecode calling conventions.
* With parameter assignments so arranged, the
* {@link com.android.dx.dex.code.RopTranslator} sees Rop {@code move-param}
* instructions as unnecessary in dex form and eliminates them.
*
* mark-local
*
* A {@link RegOps.MARK_LOCAL mark-local} instruction indicates that a local
* variable becomes live in a specified register specified register for the
* purposes of debug information. A {@code mark-local} instruction has
* a single source (the register which will now be considered a local variable)
* and no results. The instruction has no side effect.
*
* In a typical case, a local variable's lifetime begins with an
* assignment. The local variable whose information is present in a result's
* {@link RegisterSpec#getLocalItem LocalItem} is considered to begin (or move
* between registers) when the instruction is executed.
*
* However, sometimes a local variable can begin its life or move without
* an assignment occurring. A common example of this is occurs in the Rop
* representation of the following code:
*
*
* try {
* Object foo = null;
* foo = new Object();
* } catch (Throwable ex) { }
*
*
* An object's initialization occurs in two steps. First, a
* {@code new-instance} instruction is executed, whose result is stored in a
* register. However, that register can not yet be considered to contain
* "foo". That's because the instance's constructor method must be called
* via an {@code invoke} instruction. The constructor method, however, may
* throw an exception. And if an exception occurs, then "foo" should remain
* null. So "foo" becomes the value of the result of the {@code new-instance}
* instruction after the (void) constructor method is invoked and
* returns successfully. In such a case, a {@code mark-local} will
* typically occur at the beginning of the primary successor block following
* the invocation to the constructor.
*/