purejavacomm.SerialPort Maven / Gradle / Ivy
Show all versions of filo-firmata Show documentation
/*
* Copyright (c) 2011, Kustaa Nyholm / SpareTimeLabs
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* Neither the name of the Kustaa Nyholm or SpareTimeLabs nor the names of its
* contributors may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*/
package purejavacomm;
import java.io.IOException;
import java.io.InputStream;
import java.util.TooManyListenersException;
abstract public class SerialPort extends CommPort {
/**
* 5 data bit format.
*/
public static final int DATABITS_5 = 5;
/**
* 6 data bit format.
*/
public static final int DATABITS_6 = 6;
/**
* 7 data bit format.
*/
public static final int DATABITS_7 = 7;
/**
* 8 data bit format.
*/
public static final int DATABITS_8 = 8;
/**
* No parity bit.
*/
public static final int PARITY_NONE = 0;
/**
* Odd parity scheme. The parity bit is added so there are an odd number of
* TRUE bits.
*/
public static final int PARITY_ODD = 1;
/**
* Even parity scheme. The parity bit is added so there are an even number
* of TRUE bits.
*/
public static final int PARITY_EVEN = 2;
/**
* Mark parity scheme.
*/
public static final int PARITY_MARK = 3;
/**
* Space parity scheme.
*/
public static final int PARITY_SPACE = 4;
/**
* One stop bit.
*/
public static final int STOPBITS_1 = 1;
/**
* Two stop bits.
*/
public static final int STOPBITS_2 = 2;
/**
* One and 1/2 stop bits. Some UARTs permit 1-1/2 stop bits only with 5 data
* bit format, but permit 1 or 2 stop bits with any format.
*/
public static final int STOPBITS_1_5 = 3;
/**
* Flow control off.
*/
public static final int FLOWCONTROL_NONE = 0;
/**
* RTS/CTS flow control on input.
*/
public static final int FLOWCONTROL_RTSCTS_IN = 1;
/**
* RTS/CTS flow control on output.
*/
public static final int FLOWCONTROL_RTSCTS_OUT = 2;
/**
* XON/XOFF flow control on input.
*/
public static final int FLOWCONTROL_XONXOFF_IN = 4;
/**
* XON/XOFF flow control on output.
*/
public static final int FLOWCONTROL_XONXOFF_OUT = 8;
public SerialPort() {
}
/**
* Registers a SerialPortEventListener object to listen for
* SerialEvents.
*
* @param listener
* @throws TooManyListenersException
*/
public abstract void addEventListener(SerialPortEventListener listener) throws TooManyListenersException;
/**
* Returns the currently configured baud rate.
*
* @return The currently configured baud rate.
*/
public abstract int getBaudRate();
/**
* Returns the currently configured number of data bits.
*
* @return The currently configured number of data bits.
*/
public abstract int getDataBits();
/**
* Returns the currently configured flow control mode.
*
* @return The currently configured flow control mode.
*/
public abstract int getFlowControlMode();
/**
* Returns the currently configured parity setting.
*
* @return The currently configured parity setting.
*/
public abstract int getParity();
/**
* Returns the currently defined stop bits.
*
* @return The currently defined stop bits.
*/
public abstract int getStopBits();
/**
* Returns the state of the CD (Carrier Detect) bit in the UART, if
* supported by the underlying implementation.
*
* @return The state of the CD (Carrier Detect) bit.
*/
public abstract boolean isCD();
/**
* Returns the state of the CTS (Clear To Send) bit in the UART, if
* supported by the underlying implementation.
*
* @return The state of the CTS (Clear To Send) bit.
*/
public abstract boolean isCTS();
/**
* Returns the state of the DSR (Data Set Ready) bit in the UART, if
* supported by the underlying implementation.
*
* @return The state of the DSR (Data Set Ready) bit.
*/
public abstract boolean isDSR();
/**
* Returns the state of the DTR (Data Terminal Ready) bit in the UART, if
* supported by the underlying implementation.
*
* @return The state of the DTR (Data Terminal Ready) bit.
*/
public abstract boolean isDTR();
/**
* Returns the state of the RI (Ring Indicator) bit in the UART, if
* supported by the underlying implementation.
*
* @return The state of the RI (Ring Indicator) bit.
*/
public abstract boolean isRI();
/**
* Returns the state of the RTS (Request To Send) bit in the UART, if
* supported by the underlying implementation.
*
* @return The state of the RTS (Request To Send) bit.
*/
public abstract boolean isRTS();
/**
* Expresses interest in receiving notification when there is a break
* interrupt on the line.
*
* @param enable
*/
public abstract void notifyOnBreakInterrupt(boolean enable);
/**
* Expresses interest in receiving notification when the CD (Carrier Detect)
* bit changes.
*
* @param enable
*/
public abstract void notifyOnCarrierDetect(boolean enable);
/**
* Expresses interest in receiving notification when the CTS (Clear To Send)
* bit changes.
*
* @param enable
*/
public abstract void notifyOnCTS(boolean enable);
/**
* Expresses interest in receiving notification when input data is
* available.
*
* @param enable
*/
public abstract void notifyOnDataAvailable(boolean enable);
/**
* Express interest in receiving notification when the communications port
* has been lost or closed on you.
*
* @param enable
*/
public abstract void notifyOnPortClosed(boolean enable);
/**
* Expresses interest in receiving notification when the DSR (Data Set
* Ready) bit changes.
*
* This notification is hardware dependent and may not be supported by all
* implementations.
*
* @param enable
*/
public abstract void notifyOnDSR(boolean enable);
/**
* Expresses interest in receiving notification when there is a framing
* error.
*
* @param enable
*/
public abstract void notifyOnFramingError(boolean enable);
/**
* Expresses interest in receiving notification when the output buffer is
* empty.
*
* @param enable
*/
public abstract void notifyOnOutputEmpty(boolean enable);
/**
* Expresses interest in receiving notification when there is an overrun
* error.
*
* @param enable
*/
public abstract void notifyOnOverrunError(boolean enable);
/**
* Expresses interest in receiving notification when there is a parity
* error.
*
* @param enable
*/
public abstract void notifyOnParityError(boolean enable);
/**
* Expresses interest in receiving notification when the RI (Ring Indicator)
* bit changes.
*
* @param enable
*/
public abstract void notifyOnRingIndicator(boolean enable);
/**
* Deregisters event listener registered using addEventListener
* .
*
* This is done automatically when the port is closed.
*/
public abstract void removeEventListener();
/**
* Sends a break of duration milliseconds duration.
*
* @param duration
* The break duration in milliseconds.
*/
public abstract void sendBreak(int duration);
/**
* Sets or clears the DTR (Data Terminal Ready) signal, if supported by the
* underlying implementation.
*
* @param state
*/
public abstract void setDTR(boolean state);
/**
* Sets the flow control mode.
*
* @param flowcontrol
* @throws UnsupportedCommOperationException
*/
public abstract void setFlowControlMode(int flowcontrol) throws UnsupportedCommOperationException;
/**
* Sets or clears the RTS (Request To Send) bit in the UART, if supported by
* the underlying implementation.
*
* @param state
*/
public abstract void setRTS(boolean state);
/**
* Sets the serial port parameters.
*
* Default: 9600 baud, 8 data bits, 1 stop bit, no parity.
*
* @param baudRate
* @param dataBits
* @param stopBits
* @param parity
* @throws UnsupportedCommOperationException
*/
public abstract void setSerialPortParams(int baudRate, int dataBits, int stopBits, int parity) throws UnsupportedCommOperationException;
/**
* Returns an input stream. This is the only way to receive data from the
* communications port. If the port is unidirectional and doesn't support
* receiving data, then getInputStream returns null.
*
* The read behavior of the input stream returned by getInputStream depends
* on combination of the threshold and timeout values. The behaviors are
* described in the table below.
*
*
* Framing errors may cause the Timeout and Threshold trigger early and to
* complete the read prematurely without raising an exception.
*
* Enabling the Timeout OR Threshold with a value a zero is a special case.
* This causes the underlying driver to poll for incoming data instead being
* event driven. Otherwise, the behaviour is identical to having both the
* Timeout and Threshold disabled. Returns: InputStream object that can be
* used to read from the port Throws: java.io.IOException - if an I/O error
* occurred.
*
* Timeout is interpreted as inter character timeout, in other words
* the timeout will not occur as long as the pause before the first
* character or between characters is shorter that the timeout value.
*
*
*/
public abstract InputStream getInputStream() throws IOException;
}