com.datastax.driver.core.PreparedStatement Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of cassandra-driver-core Show documentation
Show all versions of cassandra-driver-core Show documentation
A driver for Apache Cassandra 1.2+ that works exclusively with the Cassandra Query Language version 3
(CQL3) and Cassandra's binary protocol.
/*
* Copyright (C) 2012-2017 DataStax Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package com.datastax.driver.core;
import com.datastax.driver.core.exceptions.InvalidTypeException;
import com.datastax.driver.core.policies.RetryPolicy;
import java.nio.ByteBuffer;
import java.util.Map;
/**
* Represents a prepared statement, a query with bound variables that has been
* prepared (pre-parsed) by the database.
*
* A prepared statement can be executed once concrete values have been provided
* for the bound variables. A prepared statement and the values for its
* bound variables constitute a BoundStatement and can be executed (by
* {@link Session#execute}).
*
* A {@code PreparedStatement} object allows you to define specific defaults
* for the different properties of a {@link Statement} (Consistency level, tracing, ...),
* in which case those properties will be inherited as default by every
* BoundedStatement created from the {PreparedStatement}. The default for those
* {@code PreparedStatement} properties is the same that in {@link Statement} if the
* PreparedStatement is created by {@link Session#prepare(String)} but will inherit
* of the properties of the {@link RegularStatement} used for the preparation if
* {@link Session#prepare(RegularStatement)} is used.
*/
public interface PreparedStatement {
/**
* Returns metadata on the bounded variables of this prepared statement.
*
* @return the variables bounded in this prepared statement.
*/
public ColumnDefinitions getVariables();
/**
* Creates a new BoundStatement object and bind its variables to the
* provided values.
*
* While the number of {@code values} cannot be greater than the number of bound
* variables, the number of {@code values} may be fewer than the number of bound
* variables. In that case, the remaining variables will have to be bound
* to values by another mean because the resulting {@code BoundStatement}
* being executable.
*
* This method is a convenience for {@code new BoundStatement(this).bind(...)}.
*
* @param values the values to bind to the variables of the newly created
* BoundStatement.
* @return the newly created {@code BoundStatement} with its variables
* bound to {@code values}.
* @throws IllegalArgumentException if more {@code values} are provided
* than there is of bound variables in this statement.
* @throws InvalidTypeException if any of the provided value is not of
* correct type to be bound to the corresponding bind variable.
* @throws NullPointerException if one of {@code values} is a collection
* (List, Set or Map) containing a null value. Nulls are not supported in
* collections by CQL.
* @see BoundStatement#bind
*/
public BoundStatement bind(Object... values);
/**
* Creates a new BoundStatement object for this prepared statement.
*
* This method do not bind any values to any of the prepared variables. Said
* values need to be bound on the resulting statement using BoundStatement's
* setters methods ({@link BoundStatement#setInt}, {@link BoundStatement#setLong}, ...).
*
* @return the newly created {@code BoundStatement}.
*/
public BoundStatement bind();
/**
* Sets the routing key for this prepared statement.
*
* While you can provide a fixed routing key for all executions of this prepared
* statement with this method, it is not mandatory to provide
* one through this method. This method should only be used
* if the partition key of the prepared query is not part of the prepared
* variables (that is if the partition key is fixed).
*
* Note that if the partition key is part of the prepared variables, the
* routing key will be automatically computed once those variables are bound.
*
* If the partition key is neither fixed nor part of the prepared variables (e.g.
* a composite partition key where only some of the components are bound), the
* routing key can also be set on each bound statement.
*
* @param routingKey the raw (binary) value to use as routing key.
* @return this {@code PreparedStatement} object.
* @see Statement#getRoutingKey
* @see BoundStatement#getRoutingKey
*/
public PreparedStatement setRoutingKey(ByteBuffer routingKey);
/**
* Sets the routing key for this query.
*
* See {@link #setRoutingKey(ByteBuffer)} for more information. This
* method is a variant for when the query partition key is composite and
* the routing key must be built from multiple values.
*
* @param routingKeyComponents the raw (binary) values to compose to obtain
* the routing key.
* @return this {@code PreparedStatement} object.
* @see Statement#getRoutingKey
*/
public PreparedStatement setRoutingKey(ByteBuffer... routingKeyComponents);
/**
* Returns the routing key set for this query.
*
* @return the routing key for this query or {@code null} if none has been
* explicitly set on this PreparedStatement.
*/
public ByteBuffer getRoutingKey();
/**
* Sets a default consistency level for all bound statements
* created from this prepared statement.
*
* If no consistency level is set through this method, the bound statement
* created from this object will use the default consistency level (ONE).
*
* Changing the default consistency level is not retroactive, it only
* applies to BoundStatement created after the change.
*
* @param consistency the default consistency level to set.
* @return this {@code PreparedStatement} object.
*/
public PreparedStatement setConsistencyLevel(ConsistencyLevel consistency);
/**
* Returns the default consistency level set through {@link #setConsistencyLevel}.
*
* @return the default consistency level. Returns {@code null} if no
* consistency level has been set through this object {@code setConsistencyLevel}
* method.
*/
public ConsistencyLevel getConsistencyLevel();
/**
* Sets a default serial consistency level for all bound statements
* created from this prepared statement.
*
* If no serial consistency level is set through this method, the bound statement
* created from this object will use the default serial consistency level (SERIAL).
*
* Changing the default serial consistency level is not retroactive, it only
* applies to BoundStatement created after the change.
*
* @param serialConsistency the default serial consistency level to set.
* @return this {@code PreparedStatement} object.
* @throws IllegalArgumentException if {@code serialConsistency} is not one of
* {@code ConsistencyLevel.SERIAL} or {@code ConsistencyLevel.LOCAL_SERIAL}.
*/
public PreparedStatement setSerialConsistencyLevel(ConsistencyLevel serialConsistency);
/**
* Returns the default serial consistency level set through {@link #setSerialConsistencyLevel}.
*
* @return the default serial consistency level. Returns {@code null} if no
* consistency level has been set through this object {@code setSerialConsistencyLevel}
* method.
*/
public ConsistencyLevel getSerialConsistencyLevel();
/**
* Returns the string of the query that was prepared to yield this {@code
* PreparedStatement}.
*
* Note that a CQL3 query may be implicitly applied to the current keyspace
* (that is, if the keyspace is not explicitly qualified in the query
* itself). For prepared queries, the current keyspace used is the one at
* the time of the preparation, not the one at execution time. The current
* keyspace at the time of the preparation can be retrieved through
* {@link #getQueryKeyspace}.
*
* @return the query that was prepared to yield this
* {@code PreparedStatement}.
*/
public String getQueryString();
/**
* Returns the keyspace at the time that this prepared statement was prepared,
* (that is the one on which this statement applies unless it specified a
* keyspace explicitly).
*
* @return the keyspace at the time that this statement was prepared or
* {@code null} if no keyspace was set when the query was prepared (which
* is possible since keyspaces can be explicitly qualified in queries and
* so may not require a current keyspace to be set).
*/
public String getQueryKeyspace();
/**
* Convenience method to enables tracing for all bound statements created
* from this prepared statement.
*
* @return this {@code Query} object.
*/
public PreparedStatement enableTracing();
/**
* Convenience method to disable tracing for all bound statements created
* from this prepared statement.
*
* @return this {@code PreparedStatement} object.
*/
public PreparedStatement disableTracing();
/**
* Returns whether tracing is enabled for this prepared statement, i.e. if
* BoundStatement created from it will use tracing by default.
*
* @return {@code true} if this prepared statement has tracing enabled,
* {@code false} otherwise.
*/
public boolean isTracing();
/**
* Convenience method to set a default retry policy for the {@code BoundStatement}
* created from this prepared statement.
*
* Note that this method is completely optional. By default, the retry policy
* used is the one returned {@link com.datastax.driver.core.policies.Policies#getRetryPolicy}
* in the cluster configuration. This method is only useful if you want
* to override this default policy for the {@code BoundStatement} created from
* this {@code PreparedStatement}.
* to punctually override the default policy for this request.
*
* @param policy the retry policy to use for this prepared statement.
* @return this {@code PreparedStatement} object.
*/
public PreparedStatement setRetryPolicy(RetryPolicy policy);
/**
* Returns the retry policy sets for this prepared statement, if any.
*
* @return the retry policy sets specifically for this prepared statement or
* {@code null} if none have been set.
*/
public RetryPolicy getRetryPolicy();
/**
* Returns the prepared Id for this statement.
*
* @return the PreparedId corresponding to this statement.
*/
public PreparedId getPreparedId();
/**
* Return the incoming payload, that is, the payload that the server
* sent back with its {@code PREPARED} response, if any,
* or {@code null}, if the server did not include any custom payload.
*
* Note that if an incoming payload is present,
* and if no outgoing payload has been {@link #setOutgoingPayload(Map) explicitly set}, then each time
* a {@link BoundStatement} is created (with either {@link #bind()} or {@link #bind(Object...)}),
* the resulting {@link BoundStatement} will inherit from this value
* as its default outgoing payload.
*
* Implementors should return a read-only view of the original map, but even though,
* its values would remain inherently mutable.
* Callers should take care not to modify the returned map in any way.
*
* This feature is only available with {@link ProtocolVersion#V4} or above; with lower
* versions, this method will always return {@code null}.
*
* @return the custom payload that the server sent back with its response, if any,
* or {@code null}, if the server did not include any custom payload.
* @since 2.2
*/
public Map getIncomingPayload();
/**
* Return the outgoing payload currently associated with this statement.
*
* If this is set to a non-null value, each time a {@link BoundStatement} is
* created (with either {@link #bind()} or {@link #bind(Object...)}),
* the resulting {@link BoundStatement} will inherit from this value
* as its default outgoing payload.
*
* Implementors should return a read-only view of the original map, but even though,
* its values would remain inherently mutable.
* Callers should take care not to modify the returned map in any way.
*
* This feature is only available with {@link ProtocolVersion#V4} or above.
*
* @return this statement's outgoing payload, if any, or {@code null} if no outgoing payload is set
* @since 2.2
*/
public Map getOutgoingPayload();
/**
* Associate the given payload with this prepared statement.
*
* If this is set to a non-null value, each time a {@link BoundStatement} is
* created (with either {@link #bind()} or {@link #bind(Object...)}),
* the resulting {@link BoundStatement} will inherit from this value
* as its default outgoing payload.
*
* Implementors should make a defensive, thread-safe copy of the given map, but even though,
* its values would remain inherently mutable.
* Callers should take care not to modify the original map once it is passed to this method.
*
* This feature is only available with {@link ProtocolVersion#V4} or above.
* Trying to include custom payloads in requests sent by the driver
* under lower protocol versions will result in an
* {@link com.datastax.driver.core.exceptions.UnsupportedFeatureException}
* (wrapped in a {@link com.datastax.driver.core.exceptions.NoHostAvailableException}).
*
* @param payload the outgoing payload to associate with this statement,
* or {@code null} to clear any previously associated payload.
* @return this {@link Statement} object.
* @since 2.2
*/
public PreparedStatement setOutgoingPayload(Map payload);
/**
* Return the {@link CodecRegistry} instance associated with this prepared statement.
* Implementations should never return {@code null}; instead, they should always return
* the {@link CodecRegistry} instance registered with the {@link Cluster} instance
* this prepared statement belongs to.
*
* @return the {@link CodecRegistry} instance associated with this prepared statement.
*/
public CodecRegistry getCodecRegistry();
/**
* Sets whether this statement is idempotent.
*
* See {@link com.datastax.driver.core.Statement#isIdempotent} for more explanations about this property.
*
* @param idempotent the new value.
* @return this {@code IdempotenceAwarePreparedStatement} object.
*/
public PreparedStatement setIdempotent(Boolean idempotent);
/**
* Whether this statement is idempotent, i.e. whether it can be applied multiple times
* without changing the result beyond the initial application.
*
* See {@link com.datastax.driver.core.Statement#isIdempotent} for more explanations about this property.
*
* Please note that idempotence will be propagated to all {@link BoundStatement}s created from this prepared statement.
*
* @return whether this statement is idempotent, or {@code null} to use
* {@link QueryOptions#getDefaultIdempotence()}.
*/
public Boolean isIdempotent();
}