com.datastax.oss.driver.shaded.netty.util.internal.shaded.org.jctools.maps.NonBlockingHashMapLong Maven / Gradle / Ivy
/*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package com.datastax.oss.driver.shaded.netty.util.internal.shaded.org.jctools.maps;
import com.datastax.oss.driver.shaded.netty.util.internal.shaded.org.jctools.util.RangeUtil;
import java.io.IOException;
import java.io.Serializable;
import java.util.*;
import java.util.concurrent.ConcurrentMap;
import java.util.concurrent.atomic.AtomicLongFieldUpdater;
import java.util.concurrent.atomic.AtomicReferenceFieldUpdater;
import static com.datastax.oss.driver.shaded.netty.util.internal.shaded.org.jctools.util.UnsafeAccess.UNSAFE;
import static com.datastax.oss.driver.shaded.netty.util.internal.shaded.org.jctools.util.UnsafeAccess.fieldOffset;
/**
* A lock-free alternate implementation of {@link java.util.concurrent.ConcurrentHashMap}
* with primitive long keys, better scaling properties and
* generally lower costs. The use of {@code long} keys allows for faster
* compares and lower memory costs. The Map provides identical correctness
* properties as ConcurrentHashMap. All operations are non-blocking and
* multi-thread safe, including all update operations. {@link
* NonBlockingHashMapLong} scales substatially better than {@link
* java.util.concurrent.ConcurrentHashMap} for high update rates, even with a large
* concurrency factor. Scaling is linear up to 768 CPUs on a 768-CPU Azul
* box, even with 100% updates or 100% reads or any fraction in-between.
* Linear scaling up to all cpus has been observed on a 32-way Sun US2 box,
* 32-way Sun Niagra box, 8-way Intel box and a 4-way Power box.
*
* The main benefit of this class over using plain {@link
* com.datastax.oss.driver.shaded.netty.util.internal.shaded.org.jctools.maps.NonBlockingHashMap} with {@link Long} keys is
* that it avoids the auto-boxing and unboxing costs. Since auto-boxing is
* automatic, it is easy to accidentally cause auto-boxing and negate
* the space and speed benefits.
*
*
This class obeys the same functional specification as {@link
* java.util.Hashtable}, and includes versions of methods corresponding to
* each method of Hashtable. However, even though all operations are
* thread-safe, operations do not entail locking and there is
* not any support for locking the entire table in a way that
* prevents all access. This class is fully interoperable with
* Hashtable in programs that rely on its thread safety but not on
* its synchronization details.
*
*
Operations (including put) generally do not block, so may
* overlap with other update operations (including other puts and
* removes). Retrievals reflect the results of the most recently
* completed update operations holding upon their onset. For
* aggregate operations such as putAll, concurrent retrievals may
* reflect insertion or removal of only some entries. Similarly, Iterators
* and Enumerations return elements reflecting the state of the hash table at
* some point at or since the creation of the iterator/enumeration. They do
* not throw {@link ConcurrentModificationException}. However,
* iterators are designed to be used by only one thread at a time.
*
*
Very full tables, or tables with high reprobe rates may trigger an
* internal resize operation to move into a larger table. Resizing is not
* terribly expensive, but it is not free either; during resize operations
* table throughput may drop somewhat. All threads that visit the table
* during a resize will 'help' the resizing but will still be allowed to
* complete their operation before the resize is finished (i.e., a simple
* 'get' operation on a million-entry table undergoing resizing will not need
* to block until the entire million entries are copied).
*
*
This class and its views and iterators implement all of the
* optional methods of the {@link Map} and {@link Iterator}
* interfaces.
*
*
Like {@link Hashtable} but unlike {@link HashMap}, this class
* does not allow null to be used as a value.
*
*
* @since 1.5
* @author Cliff Click
* @param the type of mapped values
*/
public class NonBlockingHashMapLong
extends AbstractMap
implements ConcurrentMap, Serializable {
private static final long serialVersionUID = 1234123412341234124L;
private static final int REPROBE_LIMIT=10; // Too many reprobes then force a table-resize
// --- Bits to allow Unsafe access to arrays
private static final int _Obase = UNSAFE.arrayBaseOffset(Object[].class);
private static final int _Oscale = UNSAFE.arrayIndexScale(Object[].class);
private static long rawIndex(final Object[] ary, final int idx) {
assert idx >= 0 && idx < ary.length;
// Note the long-math requirement, to handle arrays of more than 2^31 bytes
// - or 2^28 - or about 268M - 8-byte pointer elements.
return _Obase + ((long)idx * _Oscale);
}
private static final int _Lbase = UNSAFE.arrayBaseOffset(long[].class);
private static final int _Lscale = UNSAFE.arrayIndexScale(long[].class);
private static long rawIndex(final long[] ary, final int idx) {
assert idx >= 0 && idx < ary.length;
// Note the long-math requirement, to handle arrays of more than 2^31 bytes
// - or 2^28 - or about 268M - 8-byte pointer elements.
return _Lbase + ((long)idx * _Lscale);
}
// --- Bits to allow Unsafe CAS'ing of the CHM field
private static final long _chm_offset = fieldOffset(NonBlockingHashMapLong.class, "_chm");
private static final long _val_1_offset = fieldOffset(NonBlockingHashMapLong.class, "_val_1");
private final boolean CAS( final long offset, final Object old, final Object nnn ) {
return UNSAFE.compareAndSwapObject(this, offset, old, nnn );
}
// --- Adding a 'prime' bit onto Values via wrapping with a junk wrapper class
private static final class Prime {
final Object _V;
Prime( Object V ) { _V = V; }
static Object unbox( Object V ) { return V instanceof Prime ? ((Prime)V)._V : V; }
}
// --- The Hash Table --------------------
private transient CHM _chm;
// This next field holds the value for Key 0 - the special key value which
// is the initial array value, and also means: no-key-inserted-yet.
private transient Object _val_1; // Value for Key: NO_KEY
// Time since last resize
private transient long _last_resize_milli;
// Optimize for space: use a 1/2-sized table and allow more re-probes
private final boolean _opt_for_space;
// --- Minimum table size ----------------
// Pick size 16 K/V pairs, which turns into (16*2)*4+12 = 140 bytes on a
// standard 32-bit HotSpot, and (16*2)*8+12 = 268 bytes on 64-bit Azul.
private static final int MIN_SIZE_LOG=4; //
private static final int MIN_SIZE=(1<>4);
}
// --- NonBlockingHashMapLong ----------------------------------------------
// Constructors
/** Create a new NonBlockingHashMapLong with default minimum size (currently set
* to 8 K/V pairs or roughly 84 bytes on a standard 32-bit JVM). */
public NonBlockingHashMapLong( ) { this(MIN_SIZE,true); }
/** Create a new NonBlockingHashMapLong with initial room for the given
* number of elements, thus avoiding internal resizing operations to reach
* an appropriate size. Large numbers here when used with a small count of
* elements will sacrifice space for a small amount of time gained. The
* initial size will be rounded up internally to the next larger power of 2. */
public NonBlockingHashMapLong( final int initial_sz ) { this(initial_sz,true); }
/** Create a new NonBlockingHashMapLong, setting the space-for-speed
* tradeoff. {@code true} optimizes for space and is the default. {@code
* false} optimizes for speed and doubles space costs for roughly a 10%
* speed improvement. */
public NonBlockingHashMapLong( final boolean opt_for_space ) { this(1,opt_for_space); }
/** Create a new NonBlockingHashMapLong, setting both the initial size and
* the space-for-speed tradeoff. {@code true} optimizes for space and is
* the default. {@code false} optimizes for speed and doubles space costs
* for roughly a 10% speed improvement. */
public NonBlockingHashMapLong( final int initial_sz, final boolean opt_for_space ) {
_opt_for_space = opt_for_space;
initialize(initial_sz);
}
private void initialize( final int initial_sz ) {
RangeUtil.checkPositiveOrZero(initial_sz, "initial_sz");
int i; // Convert to next largest power-of-2
for( i=MIN_SIZE_LOG; (1<true if the key is in the table */
public boolean containsKey( long key ) { return get(key) != null; }
/** Legacy method testing if some key maps into the specified value in this
* table. This method is identical in functionality to {@link
* #containsValue}, and exists solely to ensure full compatibility with
* class {@link java.util.Hashtable}, which supported this method prior to
* introduction of the Java Collections framework.
* @param val a value to search for
* @return true if this map maps one or more keys to the specified value
* @throws NullPointerException if the specified value is null */
public boolean contains ( Object val ) { return containsValue(val); }
/** Maps the specified key to the specified value in the table. The value
* cannot be null. The value can be retrieved by calling {@link #get}
* with a key that is equal to the original key.
* @param key key with which the specified value is to be associated
* @param val value to be associated with the specified key
* @return the previous value associated with key, or
* null if there was no mapping for key
* @throws NullPointerException if the specified value is null */
public TypeV put ( long key, TypeV val ) { return putIfMatch( key, val,NO_MATCH_OLD);}
/** Atomically, do a {@link #put} if-and-only-if the key is not mapped.
* Useful to ensure that only a single mapping for the key exists, even if
* many threads are trying to create the mapping in parallel.
* @return the previous value associated with the specified key,
* or null if there was no mapping for the key
* @throws NullPointerException if the specified is value is null */
public TypeV putIfAbsent( long key, TypeV val ) { return putIfMatch( key, val,TOMBSTONE );}
/** Removes the key (and its corresponding value) from this map.
* This method does nothing if the key is not in the map.
* @return the previous value associated with key, or
* null if there was no mapping for key*/
public TypeV remove ( long key ) { return putIfMatch( key,TOMBSTONE,NO_MATCH_OLD);}
/** Atomically do a {@link #remove(long)} if-and-only-if the key is mapped
* to a value which is equals to the given value.
* @throws NullPointerException if the specified value is null */
public boolean remove ( long key,Object val ) { return putIfMatch( key,TOMBSTONE,val ) == val ;}
/** Atomically do a put(key,val) if-and-only-if the key is
* mapped to some value already.
* @throws NullPointerException if the specified value is null */
public TypeV replace ( long key, TypeV val ) { return putIfMatch( key, val,MATCH_ANY );}
/** Atomically do a put(key,newValue) if-and-only-if the key is
* mapped a value which is equals to oldValue.
* @throws NullPointerException if the specified value is null */
public boolean replace ( long key, TypeV oldValue, TypeV newValue ) {
return putIfMatch( key, newValue, oldValue ) == oldValue;
}
private TypeV putIfMatch( long key, Object newVal, Object oldVal ) {
if (oldVal == null || newVal == null) throw new NullPointerException();
if( key == NO_KEY ) {
Object curVal = _val_1;
if( oldVal == NO_MATCH_OLD || // Do we care about expected-Value at all?
curVal == oldVal || // No instant match already?
(oldVal == MATCH_ANY && curVal != TOMBSTONE) ||
oldVal.equals(curVal) ) { // Expensive equals check
if( !CAS(_val_1_offset,curVal,newVal) ) // One shot CAS update attempt
curVal = _val_1; // Failed; get failing witness
}
return curVal == TOMBSTONE ? null : (TypeV)curVal; // Return the last value present
}
final Object res = _chm.putIfMatch( key, newVal, oldVal );
assert !(res instanceof Prime);
assert res != null;
return res == TOMBSTONE ? null : (TypeV)res;
}
/** Removes all of the mappings from this map. */
public void clear() { // Smack a new empty table down
CHM newchm = new CHM(this,new ConcurrentAutoTable(),MIN_SIZE_LOG);
while( !CAS(_chm_offset,_chm,newchm) ) { /*Spin until the clear works*/}
CAS(_val_1_offset,_val_1,TOMBSTONE);
}
/** Returns true if this Map maps one or more keys to the specified
* value. Note: This method requires a full internal traversal of the
* hash table and is much slower than {@link #containsKey}.
* @param val value whose presence in this map is to be tested
* @return true if this Map maps one or more keys to the specified value
* @throws NullPointerException if the specified value is null */
public boolean containsValue( Object val ) {
if( val == null ) return false;
if( val == _val_1 ) return true; // Key 0
for( TypeV V : values() )
if( V == val || V.equals(val) )
return true;
return false;
}
// --- get -----------------------------------------------------------------
/** Returns the value to which the specified key is mapped, or {@code null}
* if this map contains no mapping for the key.
*
More formally, if this map contains a mapping from a key {@code k} to
* a value {@code v} such that {@code key==k}, then this method
* returns {@code v}; otherwise it returns {@code null}. (There can be at
* most one such mapping.)
* @throws NullPointerException if the specified key is null */
// Never returns a Prime nor a Tombstone.
public final TypeV get( long key ) {
if( key == NO_KEY ) {
final Object V = _val_1;
return V == TOMBSTONE ? null : (TypeV)V;
}
final Object V = _chm.get_impl(key);
assert !(V instanceof Prime); // Never return a Prime
assert V != TOMBSTONE;
return (TypeV)V;
}
/** Auto-boxing version of {@link #get(long)}. */
public TypeV get ( Object key ) { return (key instanceof Long) ? get (((Long)key).longValue()) : null; }
/** Auto-boxing version of {@link #remove(long)}. */
public TypeV remove ( Object key ) { return (key instanceof Long) ? remove (((Long)key).longValue()) : null; }
/** Auto-boxing version of {@link #remove(long,Object)}. */
public boolean remove ( Object key, Object Val ) { return (key instanceof Long) && remove(((Long) key).longValue(), Val); }
/** Auto-boxing version of {@link #containsKey(long)}. */
public boolean containsKey( Object key ) { return (key instanceof Long) && containsKey(((Long) key).longValue()); }
/** Auto-boxing version of {@link #putIfAbsent}. */
public TypeV putIfAbsent( Long key, TypeV val ) { return putIfAbsent( key.longValue(), val ); }
/** Auto-boxing version of {@link #replace}. */
public TypeV replace( Long key, TypeV Val ) { return replace(key.longValue(), Val); }
/** Auto-boxing version of {@link #put}. */
public TypeV put ( Long key, TypeV val ) { return put(key.longValue(),val); }
/** Auto-boxing version of {@link #replace}. */
public boolean replace( Long key, TypeV oldValue, TypeV newValue ) {
return replace(key.longValue(), oldValue, newValue);
}
// --- help_copy -----------------------------------------------------------
// Help along an existing resize operation. This is just a fast cut-out
// wrapper, to encourage inlining for the fast no-copy-in-progress case. We
// always help the top-most table copy, even if there are nested table
// copies in progress.
private void help_copy( ) {
// Read the top-level CHM only once. We'll try to help this copy along,
// even if it gets promoted out from under us (i.e., the copy completes
// and another KVS becomes the top-level copy).
CHM topchm = _chm;
if( topchm._newchm == null ) return; // No copy in-progress
topchm.help_copy_impl(false);
}
// --- CHM -----------------------------------------------------------------
// The control structure for the NonBlockingHashMapLong
private static final class CHM implements Serializable {
// Back-pointer to top-level structure
final NonBlockingHashMapLong _nbhml;
// Size in active K,V pairs
private final ConcurrentAutoTable _size;
public int size () { return (int)_size.get(); }
// ---
// These next 2 fields are used in the resizing heuristics, to judge when
// it is time to resize or copy the table. Slots is a count of used-up
// key slots, and when it nears a large fraction of the table we probably
// end up reprobing too much. Last-resize-milli is the time since the
// last resize; if we are running back-to-back resizes without growing
// (because there are only a few live keys but many slots full of dead
// keys) then we need a larger table to cut down on the churn.
// Count of used slots, to tell when table is full of dead unusable slots
private final ConcurrentAutoTable _slots;
public int slots() { return (int)_slots.get(); }
// ---
// New mappings, used during resizing.
// The 'next' CHM - created during a resize operation. This represents
// the new table being copied from the old one. It's the volatile
// variable that is read as we cross from one table to the next, to get
// the required memory orderings. It monotonically transits from null to
// set (once).
volatile CHM _newchm;
private static final AtomicReferenceFieldUpdater _newchmUpdater =
AtomicReferenceFieldUpdater.newUpdater(CHM.class,CHM.class, "_newchm");
// Set the _newchm field if we can. AtomicUpdaters do not fail spuriously.
boolean CAS_newchm( CHM newchm ) {
return _newchmUpdater.compareAndSet(this,null,newchm);
}
// Sometimes many threads race to create a new very large table. Only 1
// wins the race, but the losers all allocate a junk large table with
// hefty allocation costs. Attempt to control the overkill here by
// throttling attempts to create a new table. I cannot really block here
// (lest I lose the non-blocking property) but late-arriving threads can
// give the initial resizing thread a little time to allocate the initial
// new table. The Right Long Term Fix here is to use array-lets and
// incrementally create the new very large array. In C I'd make the array
// with malloc (which would mmap under the hood) which would only eat
// virtual-address and not real memory - and after Somebody wins then we
// could in parallel initialize the array. Java does not allow
// un-initialized array creation (especially of ref arrays!).
volatile long _resizers; // count of threads attempting an initial resize
private static final AtomicLongFieldUpdater _resizerUpdater =
AtomicLongFieldUpdater.newUpdater(CHM.class, "_resizers");
// --- key,val -------------------------------------------------------------
// Access K,V for a given idx
private boolean CAS_key( int idx, long old, long key ) {
return UNSAFE.compareAndSwapLong ( _keys, rawIndex(_keys, idx), old, key );
}
private boolean CAS_val( int idx, Object old, Object val ) {
return UNSAFE.compareAndSwapObject( _vals, rawIndex(_vals, idx), old, val );
}
final long [] _keys;
final Object [] _vals;
// Simple constructor
CHM( final NonBlockingHashMapLong nbhml, ConcurrentAutoTable size, final int logsize ) {
_nbhml = nbhml;
_size = size;
_slots= new ConcurrentAutoTable();
_keys = new long [1<= reprobe_limit(len) ) // too many probes
return _newchm == null // Table copy in progress?
? null // Nope! A clear miss
: copy_slot_and_check(idx,key).get_impl(key); // Retry in the new table
idx = (idx+1)&(len-1); // Reprobe by 1! (could now prefetch)
}
}
// --- putIfMatch ---------------------------------------------------------
// Put, Remove, PutIfAbsent, etc. Return the old value. If the returned
// value is equal to expVal (or expVal is NO_MATCH_OLD) then the put can
// be assumed to work (although might have been immediately overwritten).
// Only the path through copy_slot passes in an expected value of null,
// and putIfMatch only returns a null if passed in an expected null.
private Object putIfMatch( final long key, final Object putval, final Object expVal ) {
assert putval != null;
assert !(putval instanceof Prime);
assert !(expVal instanceof Prime);
final int len = _keys.length;
int idx = (int)(key & (len-1)); // The first key
// ---
// Key-Claim stanza: spin till we can claim a Key (or force a resizing).
int reprobe_cnt=0;
long K;
Object V;
while( true ) { // Spin till we get a Key slot
V = _vals[idx]; // Get old value
K = _keys[idx]; // Get current key
if( K == NO_KEY ) { // Slot is free?
// Found an empty Key slot - which means this Key has never been in
// this table. No need to put a Tombstone - the Key is not here!
if( putval == TOMBSTONE ) return TOMBSTONE; // Not-now & never-been in this table
if( expVal == MATCH_ANY ) return TOMBSTONE; // Will not match, even after K inserts
// Claim the zero key-slot
if( CAS_key(idx, NO_KEY, key) ) { // Claim slot for Key
_slots.add(1); // Raise key-slots-used count
break; // Got it!
}
// CAS to claim the key-slot failed.
//
// This re-read of the Key points out an annoying short-coming of Java
// CAS. Most hardware CAS's report back the existing value - so that
// if you fail you have a *witness* - the value which caused the CAS
// to fail. The Java API turns this into a boolean destroying the
// witness. Re-reading does not recover the witness because another
// thread can write over the memory after the CAS. Hence we can be in
// the unfortunate situation of having a CAS fail *for cause* but
// having that cause removed by a later store. This turns a
// non-spurious-failure CAS (such as Azul has) into one that can
// apparently spuriously fail - and we avoid apparent spurious failure
// by not allowing Keys to ever change.
K = _keys[idx]; // CAS failed, get updated value
assert K != NO_KEY ; // If keys[idx] is NO_KEY, CAS shoulda worked
}
// Key slot was not null, there exists a Key here
if( K == key )
break; // Got it!
// get and put must have the same key lookup logic! Lest 'get' give
// up looking too soon.
//topmap._reprobes.add(1);
if( ++reprobe_cnt >= reprobe_limit(len) ) {
// We simply must have a new table to do a 'put'. At this point a
// 'get' will also go to the new table (if any). We do not need
// to claim a key slot (indeed, we cannot find a free one to claim!).
final CHM newchm = resize();
if( expVal != null ) _nbhml.help_copy(); // help along an existing copy
return newchm.putIfMatch(key,putval,expVal);
}
idx = (idx+1)&(len-1); // Reprobe!
} // End of spinning till we get a Key slot
// ---
// Found the proper Key slot, now update the matching Value slot. We
// never put a null, so Value slots monotonically move from null to
// not-null (deleted Values use Tombstone). Thus if 'V' is null we
// fail this fast cutout and fall into the check for table-full.
if( putval == V ) return V; // Fast cutout for no-change
// See if we want to move to a new table (to avoid high average re-probe
// counts). We only check on the initial set of a Value from null to
// not-null (i.e., once per key-insert).
if( (V == null && tableFull(reprobe_cnt,len)) ||
// Or we found a Prime: resize is already in progress. The resize
// call below will do a CAS on _newchm forcing the read.
V instanceof Prime) {
resize(); // Force the new table copy to start
return copy_slot_and_check(idx,expVal).putIfMatch(key,putval,expVal);
}
// ---
// We are finally prepared to update the existing table
//assert !(V instanceof Prime); // always true, so IDE warnings if uncommented
// Must match old, and we do not? Then bail out now. Note that either V
// or expVal might be TOMBSTONE. Also V can be null, if we've never
// inserted a value before. expVal can be null if we are called from
// copy_slot.
if( expVal != NO_MATCH_OLD && // Do we care about expected-Value at all?
V != expVal && // No instant match already?
(expVal != MATCH_ANY || V == TOMBSTONE || V == null) &&
!(V==null && expVal == TOMBSTONE) && // Match on null/TOMBSTONE combo
(expVal == null || !expVal.equals(V)) ) // Expensive equals check at the last
return (V==null) ? TOMBSTONE : V; // Do not update!
// Actually change the Value in the Key,Value pair
if( CAS_val(idx, V, putval ) ) {
// CAS succeeded - we did the update!
// Both normal put's and table-copy calls putIfMatch, but table-copy
// does not (effectively) increase the number of live k/v pairs.
if( expVal != null ) {
// Adjust sizes - a striped counter
if( (V == null || V == TOMBSTONE) && putval != TOMBSTONE ) _size.add( 1);
if( !(V == null || V == TOMBSTONE) && putval == TOMBSTONE ) _size.add(-1);
}
} else { // Else CAS failed
V = _vals[idx]; // Get new value
// If a Prime'd value got installed, we need to re-run the put on the
// new table. Otherwise we lost the CAS to another racing put.
// Simply retry from the start.
if( V instanceof Prime )
return copy_slot_and_check(idx,expVal).putIfMatch(key,putval,expVal);
}
// Win or lose the CAS, we are done. If we won then we know the update
// happened as expected. If we lost, it means "we won but another thread
// immediately stomped our update with no chance of a reader reading".
return (V==null && expVal!=null) ? TOMBSTONE : V;
}
// --- tableFull ---------------------------------------------------------
// Heuristic to decide if this table is too full, and we should start a
// new table. Note that if a 'get' call has reprobed too many times and
// decided the table must be full, then always the estimate_sum must be
// high and we must report the table is full. If we do not, then we might
// end up deciding that the table is not full and inserting into the
// current table, while a 'get' has decided the same key cannot be in this
// table because of too many reprobes. The invariant is:
// slots.estimate_sum >= max_reprobe_cnt >= reprobe_limit(len)
private final boolean tableFull( int reprobe_cnt, int len ) {
return
// Do the cheap check first: we allow some number of reprobes always
reprobe_cnt >= REPROBE_LIMIT &&
(reprobe_cnt >= reprobe_limit(len) ||
// More expensive check: see if the table is > 1/2 full.
_slots.estimate_get() >= (len>>1));
}
// --- resize ------------------------------------------------------------
// Resizing after too many probes. "How Big???" heuristics are here.
// Callers will (not this routine) will 'help_copy' any in-progress copy.
// Since this routine has a fast cutout for copy-already-started, callers
// MUST 'help_copy' lest we have a path which forever runs through
// 'resize' only to discover a copy-in-progress which never progresses.
private final CHM resize() {
// Check for resize already in progress, probably triggered by another thread
CHM newchm = _newchm; // VOLATILE READ
if( newchm != null ) // See if resize is already in progress
return newchm; // Use the new table already
// No copy in-progress, so start one. First up: compute new table size.
int oldlen = _keys.length; // Old count of K,V pairs allowed
int sz = size(); // Get current table count of active K,V pairs
int newsz = sz; // First size estimate
// Heuristic to determine new size. We expect plenty of dead-slots-with-keys
// and we need some decent padding to avoid endless reprobing.
if( _nbhml._opt_for_space ) {
// This heuristic leads to a much denser table with a higher reprobe rate
if( sz >= (oldlen>>1) ) // If we are >50% full of keys then...
newsz = oldlen<<1; // Double size
} else {
if( sz >= (oldlen>>2) ) { // If we are >25% full of keys then...
newsz = oldlen<<1; // Double size
if( sz >= (oldlen>>1) ) // If we are >50% full of keys then...
newsz = oldlen<<2; // Double double size
}
}
// Last (re)size operation was very recent? Then double again
// despite having few live keys; slows down resize operations
// for tables subject to a high key churn rate - but do not
// forever grow the table. If there is a high key churn rate
// the table needs a steady state of rare same-size resize
// operations to clean out the dead keys.
long tm = System.currentTimeMillis();
if( newsz <= oldlen && // New table would shrink or hold steady?
tm <= _nbhml._last_resize_milli+10000) // Recent resize (less than 10 sec ago)
newsz = oldlen<<1; // Double the existing size
// Do not shrink, ever. If we hit this size once, assume we
// will again.
if( newsz < oldlen ) newsz = oldlen;
// Convert to power-of-2
int log2;
for( log2=MIN_SIZE_LOG; (1< ((len >> 2) + (len >> 1))) throw new RuntimeException("Table is full.");
}
// Now limit the number of threads actually allocating memory to a
// handful - lest we have 750 threads all trying to allocate a giant
// resized array.
long r = _resizers;
while( !_resizerUpdater.compareAndSet(this,r,r+1) )
r = _resizers;
// Size calculation: 2 words (K+V) per table entry, plus a handful. We
// guess at 64-bit pointers; 32-bit pointers screws up the size calc by
// 2x but does not screw up the heuristic very much.
long megs = ((((1L<>20/*megs*/;
if( r >= 2 && megs > 0 ) { // Already 2 guys trying; wait and see
newchm = _newchm; // Between dorking around, another thread did it
if( newchm != null ) // See if resize is already in progress
return newchm; // Use the new table already
// We could use a wait with timeout, so we'll wakeup as soon as the new table
// is ready, or after the timeout in any case.
//synchronized( this ) { wait(8*megs); } // Timeout - we always wakeup
// For now, sleep a tad and see if the 2 guys already trying to make
// the table actually get around to making it happen.
try { Thread.sleep(megs); } catch( Exception e ) { /*empty*/}
}
// Last check, since the 'new' below is expensive and there is a chance
// that another thread slipped in a new thread while we ran the heuristic.
newchm = _newchm;
if( newchm != null ) // See if resize is already in progress
return newchm; // Use the new table already
// New CHM - actually allocate the big arrays
newchm = new CHM(_nbhml,_size,log2);
// Another check after the slow allocation
if( _newchm != null ) // See if resize is already in progress
return _newchm; // Use the new table already
// The new table must be CAS'd in so only 1 winner amongst duplicate
// racing resizing threads. Extra CHM's will be GC'd.
if( CAS_newchm( newchm ) ) { // NOW a resize-is-in-progress!
//notifyAll(); // Wake up any sleepers
//long nano = System.nanoTime();
//System.out.println(" "+nano+" Resize from "+oldlen+" to "+(1< _copyIdxUpdater =
AtomicLongFieldUpdater.newUpdater(CHM.class, "_copyIdx");
// Work-done reporting. Used to efficiently signal when we can move to
// the new table. From 0 to len(oldkvs) refers to copying from the old
// table to the new.
volatile long _copyDone= 0;
static private final AtomicLongFieldUpdater _copyDoneUpdater =
AtomicLongFieldUpdater.newUpdater(CHM.class, "_copyDone");
// --- help_copy_impl ----------------------------------------------------
// Help along an existing resize operation. We hope its the top-level
// copy (it was when we started) but this CHM might have been promoted out
// of the top position.
private final void help_copy_impl( final boolean copy_all ) {
final CHM newchm = _newchm;
assert newchm != null; // Already checked by caller
int oldlen = _keys.length; // Total amount to copy
final int MIN_COPY_WORK = Math.min(oldlen,1024); // Limit per-thread work
// ---
int panic_start = -1;
int copyidx=-9999; // Fool javac to think it's initialized
while( _copyDone < oldlen ) { // Still needing to copy?
// Carve out a chunk of work. The counter wraps around so every
// thread eventually tries to copy every slot repeatedly.
// We "panic" if we have tried TWICE to copy every slot - and it still
// has not happened. i.e., twice some thread somewhere claimed they
// would copy 'slot X' (by bumping _copyIdx) but they never claimed to
// have finished (by bumping _copyDone). Our choices become limited:
// we can wait for the work-claimers to finish (and become a blocking
// algorithm) or do the copy work ourselves. Tiny tables with huge
// thread counts trying to copy the table often 'panic'.
if( panic_start == -1 ) { // No panic?
copyidx = (int)_copyIdx;
while( !_copyIdxUpdater.compareAndSet(this,copyidx,copyidx+MIN_COPY_WORK) )
copyidx = (int)_copyIdx; // Re-read
if( !(copyidx < (oldlen<<1)) ) // Panic!
panic_start = copyidx; // Record where we started to panic-copy
}
// We now know what to copy. Try to copy.
int workdone = 0;
for( int i=0; i 0 ) // Report work-done occasionally
copy_check_and_promote( workdone );// See if we can promote
//for( int i=0; i 0 ) {
while( !_copyDoneUpdater.compareAndSet(this,copyDone,copyDone+workdone) ) {
copyDone = _copyDone; // Reload, retry
assert (copyDone+workdone) <= oldlen;
}
}
// Check for copy being ALL done, and promote. Note that we might have
// nested in-progress copies and manage to finish a nested copy before
// finishing the top-level copy. We only promote top-level copies.
if( copyDone+workdone == oldlen && // Ready to promote this table?
_nbhml._chm == this && // Looking at the top-level table?
// Attempt to promote
_nbhml.CAS(_chm_offset,this,_newchm) ) {
_nbhml._last_resize_milli = System.currentTimeMillis(); // Record resize time for next check
}
}
// --- copy_slot ---------------------------------------------------------
// Copy one K/V pair from oldkvs[i] to newkvs. Returns true if we can
// confirm that we set an old-table slot to TOMBPRIME, and only returns after
// updating the new table. We need an accurate confirmed-copy count so
// that we know when we can promote (if we promote the new table too soon,
// other threads may 'miss' on values not-yet-copied from the old table).
// We don't allow any direct updates on the new table, unless they first
// happened to the old table - so that any transition in the new table from
// null to not-null must have been from a copy_slot (or other old-table
// overwrite) and not from a thread directly writing in the new table.
private boolean copy_slot( int idx ) {
// Blindly set the key slot from NO_KEY to some key which hashes here,
// to eagerly stop fresh put's from inserting new values in the old
// table when the old table is mid-resize. We don't need to act on the
// results here, because our correctness stems from box'ing the Value
// field. Slamming the Key field is a minor speed optimization.
long key;
while( (key=_keys[idx]) == NO_KEY )
CAS_key(idx, NO_KEY, (idx+_keys.length)/*a non-zero key which hashes here*/);
// ---
// Prevent new values from appearing in the old table.
// Box what we see in the old table, to prevent further updates.
Object oldval = _vals[idx]; // Read OLD table
while( !(oldval instanceof Prime) ) {
final Prime box = (oldval == null || oldval == TOMBSTONE) ? TOMBPRIME : new Prime(oldval);
if( CAS_val(idx,oldval,box) ) { // CAS down a box'd version of oldval
// If we made the Value slot hold a TOMBPRIME, then we both
// prevented further updates here but also the (absent) oldval is
// vaccuously available in the new table. We return with true here:
// any thread looking for a value for this key can correctly go
// straight to the new table and skip looking in the old table.
if( box == TOMBPRIME )
return true;
// Otherwise we boxed something, but it still needs to be
// copied into the new table.
oldval = box; // Record updated oldval
break; // Break loop; oldval is now boxed by us
}
oldval = _vals[idx]; // Else try, try again
}
if( oldval == TOMBPRIME ) return false; // Copy already complete here!
// ---
// Copy the value into the new table, but only if we overwrite a null.
// If another value is already in the new table, then somebody else
// wrote something there and that write is happens-after any value that
// appears in the old table.
Object old_unboxed = ((Prime)oldval)._V;
assert old_unboxed != TOMBSTONE;
_newchm.putIfMatch(key, old_unboxed, null);
// ---
// Finally, now that any old value is exposed in the new table, we can
// forever hide the old-table value by slapping a TOMBPRIME down. This
// will stop other threads from uselessly attempting to copy this slot
// (i.e., it's a speed optimization not a correctness issue).
while( oldval != TOMBPRIME && !CAS_val(idx,oldval,TOMBPRIME) )
oldval = _vals[idx];
return oldval != TOMBPRIME; // True if we slammed the TOMBPRIME down
} // end copy_slot
} // End of CHM
// --- Snapshot ------------------------------------------------------------
// The main class for iterating over the NBHM. It "snapshots" a clean
// view of the K/V array.
private class SnapshotV implements Iterator, Enumeration {
final CHM _sschm;
public SnapshotV() {
CHM topchm;
while( true ) { // Verify no table-copy-in-progress
topchm = _chm;
if( topchm._newchm == null ) // No table-copy-in-progress
break;
// Table copy in-progress - so we cannot get a clean iteration. We
// must help finish the table copy before we can start iterating.
topchm.help_copy_impl(true);
}
// The "linearization point" for the iteration. Every key in this table
// will be visited, but keys added later might be skipped or even be
// added to a following table (also not iterated over).
_sschm = topchm;
// Warm-up the iterator
_idx = -1;
next();
}
int length() { return _sschm._keys.length; }
long key(final int idx) { return _sschm._keys[idx]; }
private int _idx; // -2 for NO_KEY, -1 for CHECK_NEW_TABLE_LONG, 0-keys.length
private long _nextK, _prevK; // Last 2 keys found
private TypeV _nextV, _prevV; // Last 2 values found
public boolean hasNext() { return _nextV != null; }
public TypeV next() {
// 'next' actually knows what the next value will be - it had to
// figure that out last go 'round lest 'hasNext' report true and
// some other thread deleted the last value. Instead, 'next'
// spends all its effort finding the key that comes after the
// 'next' key.
if( _idx != -1 && _nextV == null ) throw new NoSuchElementException();
_prevK = _nextK; // This will become the previous key
_prevV = _nextV; // This will become the previous value
_nextV = null; // We have no more next-key
// Attempt to set <_nextK,_nextV> to the next K,V pair.
// _nextV is the trigger: stop searching when it is != null
if( _idx == -1 ) { // Check for NO_KEY
_idx = 0; // Setup for next phase of search
_nextK = NO_KEY;
if( (_nextV=get(_nextK)) != null ) return _prevV;
}
while( _idx elements() { return new SnapshotV(); }
// --- values --------------------------------------------------------------
/** Returns a {@link Collection} view of the values contained in this map.
* The collection is backed by the map, so changes to the map are reflected
* in the collection, and vice-versa. The collection supports element
* removal, which removes the corresponding mapping from this map, via the
* Iterator.remove, Collection.remove,
* removeAll, retainAll, and clear operations.
* It does not support the add or addAll operations.
*
* The view's iterator is a "weakly consistent" iterator that
* will never throw {@link ConcurrentModificationException}, and guarantees
* to traverse elements as they existed upon construction of the iterator,
* and may (but is not guaranteed to) reflect any modifications subsequent
* to construction. */
public Collection values() {
return new AbstractCollection() {
public void clear ( ) { NonBlockingHashMapLong.this.clear ( ); }
public int size ( ) { return NonBlockingHashMapLong.this.size ( ); }
public boolean contains( Object v ) { return NonBlockingHashMapLong.this.containsValue(v); }
public Iterator iterator() { return new SnapshotV(); }
};
}
// --- keySet --------------------------------------------------------------
/** A class which implements the {@link Iterator} and {@link Enumeration}
* interfaces, generified to the {@link Long} class and supporting a
* non-auto-boxing {@link #nextLong} function. */
public class IteratorLong implements Iterator, Enumeration {
private final SnapshotV _ss;
/** A new IteratorLong */
public IteratorLong() { _ss = new SnapshotV(); }
/** Remove last key returned by {@link #next} or {@link #nextLong}. */
public void remove() { _ss.remove(); }
/** Auto-box and return the next key. */
public Long next () { _ss.next(); return _ss._prevK; }
/** Return the next key as a primitive {@code long}. */
public long nextLong() { _ss.next(); return _ss._prevK; }
/** True if there are more keys to iterate over. */
public boolean hasNext() { return _ss.hasNext(); }
/** Auto-box and return the next key. */
public Long nextElement() { return next(); }
/** True if there are more keys to iterate over. */
public boolean hasMoreElements() { return hasNext(); }
}
/** Returns an enumeration of the auto-boxed keys in this table.
* Warning: this version will auto-box all returned keys.
* @return an enumeration of the auto-boxed keys in this table
* @see #keySet() */
public Enumeration keys() { return new IteratorLong(); }
/** Returns a {@link Set} view of the keys contained in this map; with care
* the keys may be iterated over without auto-boxing. The
* set is backed by the map, so changes to the map are reflected in the
* set, and vice-versa. The set supports element removal, which removes
* the corresponding mapping from this map, via the
* Iterator.remove, Set.remove, removeAll,
* retainAll, and clear operations. It does not support
* the add or addAll operations.
*
* The view's iterator is a "weakly consistent" iterator that
* will never throw {@link ConcurrentModificationException}, and guarantees
* to traverse elements as they existed upon construction of the iterator,
* and may (but is not guaranteed to) reflect any modifications subsequent
* to construction. */
public Set keySet() {
return new AbstractSet () {
public void clear ( ) { NonBlockingHashMapLong.this.clear ( ); }
public int size ( ) { return NonBlockingHashMapLong.this.size ( ); }
public boolean contains( Object k ) { return NonBlockingHashMapLong.this.containsKey(k); }
public boolean remove ( Object k ) { return NonBlockingHashMapLong.this.remove (k) != null; }
public IteratorLong iterator() { return new IteratorLong(); }
};
}
/** Keys as a long array. Array may be zero-padded if keys are concurrently deleted. */
public long[] keySetLong() {
long[] dom = new long[size()];
IteratorLong i=(IteratorLong)keySet().iterator();
int j=0;
while( j < dom.length && i.hasNext() )
dom[j++] = i.nextLong();
return dom;
}
// --- entrySet ------------------------------------------------------------
// Warning: Each call to 'next' in this iterator constructs a new Long and a
// new NBHMLEntry.
private class NBHMLEntry extends AbstractEntry {
NBHMLEntry( final Long k, final TypeV v ) { super(k,v); }
public TypeV setValue(final TypeV val) {
if (val == null) throw new NullPointerException();
_val = val;
return put(_key, val);
}
}
private class SnapshotE implements Iterator> {
final SnapshotV _ss;
public SnapshotE() { _ss = new SnapshotV(); }
public void remove() { _ss.remove(); }
public Map.Entry next() { _ss.next(); return new NBHMLEntry(_ss._prevK,_ss._prevV); }
public boolean hasNext() { return _ss.hasNext(); }
}
/** Returns a {@link Set} view of the mappings contained in this map. The
* set is backed by the map, so changes to the map are reflected in the
* set, and vice-versa. The set supports element removal, which removes
* the corresponding mapping from the map, via the
* Iterator.remove, Set.remove, removeAll,
* retainAll, and clear operations. It does not support
* the add or addAll operations.
*
* The view's iterator is a "weakly consistent" iterator
* that will never throw {@link ConcurrentModificationException},
* and guarantees to traverse elements as they existed upon
* construction of the iterator, and may (but is not guaranteed to)
* reflect any modifications subsequent to construction.
*
*
Warning: the iterator associated with this Set
* requires the creation of {@link java.util.Map.Entry} objects with each
* iteration. The {@link com.datastax.oss.driver.shaded.netty.util.internal.shaded.org.jctools.maps.NonBlockingHashMap}
* does not normally create or using {@link java.util.Map.Entry} objects so
* they will be created soley to support this iteration. Iterating using
* {@link #keySet} or {@link #values} will be more efficient. In addition,
* this version requires auto-boxing the keys.
*/
public Set> entrySet() {
return new AbstractSet>() {
public void clear ( ) { NonBlockingHashMapLong.this.clear( ); }
public int size ( ) { return NonBlockingHashMapLong.this.size ( ); }
public boolean remove( final Object o ) {
if (!(o instanceof Map.Entry)) return false;
final Map.Entry e = (Map.Entry)o;
return NonBlockingHashMapLong.this.remove(e.getKey(), e.getValue());
}
public boolean contains(final Object o) {
if (!(o instanceof Map.Entry)) return false;
final Map.Entry e = (Map.Entry)o;
TypeV v = get(e.getKey());
return v != null && v.equals(e.getValue());
}
public Iterator> iterator() { return new SnapshotE(); }
};
}
// --- writeObject -------------------------------------------------------
// Write a NBHML to a stream
private void writeObject(java.io.ObjectOutputStream s) throws IOException {
s.defaultWriteObject(); // Write nothing
for( long K : keySet() ) {
final Object V = get(K); // Do an official 'get'
s.writeLong (K); // Write the pair
s.writeObject(V);
}
s.writeLong(NO_KEY); // Sentinel to indicate end-of-data
s.writeObject(null);
}
// --- readObject --------------------------------------------------------
// Read a CHM from a stream
private void readObject(java.io.ObjectInputStream s) throws IOException, ClassNotFoundException {
s.defaultReadObject(); // Read nothing
initialize(MIN_SIZE);
for (;;) {
final long K = s.readLong();
final TypeV V = (TypeV) s.readObject();
if( K == NO_KEY && V == null ) break;
put(K,V); // Insert with an offical put
}
}
} // End NonBlockingHashMapLong class