org.glassfish.jersey.client.oauth1.OAuth1Builder Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of jersey-all Show documentation
Show all versions of jersey-all Show documentation
jersey-all is a rebundled verison of Jersey as one OSGi bundle.
/*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
*
* Copyright (c) 2013-2015 Oracle and/or its affiliates. All rights reserved.
*
* The contents of this file are subject to the terms of either the GNU
* General Public License Version 2 only ("GPL") or the Common Development
* and Distribution License("CDDL") (collectively, the "License"). You
* may not use this file except in compliance with the License. You can
* obtain a copy of the License at
* http://glassfish.java.net/public/CDDL+GPL_1_1.html
* or packager/legal/LICENSE.txt. See the License for the specific
* language governing permissions and limitations under the License.
*
* When distributing the software, include this License Header Notice in each
* file and include the License file at packager/legal/LICENSE.txt.
*
* GPL Classpath Exception:
* Oracle designates this particular file as subject to the "Classpath"
* exception as provided by Oracle in the GPL Version 2 section of the License
* file that accompanied this code.
*
* Modifications:
* If applicable, add the following below the License Header, with the fields
* enclosed by brackets [] replaced by your own identifying information:
* "Portions Copyright [year] [name of copyright owner]"
*
* Contributor(s):
* If you wish your version of this file to be governed by only the CDDL or
* only the GPL Version 2, indicate your decision by adding "[Contributor]
* elects to include this software in this distribution under the [CDDL or GPL
* Version 2] license." If you don't indicate a single choice of license, a
* recipient has the option to distribute your version of this file under
* either the CDDL, the GPL Version 2 or to extend the choice of license to
* its licensees as provided above. However, if you add GPL Version 2 code
* and therefore, elected the GPL Version 2 license, then the option applies
* only if the new code is made subject to such option by the copyright
* holder.
*/
package org.glassfish.jersey.client.oauth1;
import javax.ws.rs.client.Client;
import javax.ws.rs.core.Feature;
/**
* Builder of OAuth 1 client support. This builder can build {@link OAuth1AuthorizationFlow} using a method
* {@link #authorizationFlow(String, String, String)} and {@link Feature filter feature} using a method
* {@link #feature()}. Before one of these methods is invoked, properties common for both features
* can be defined using methods of this builder. However, for default OAuth configuration there should not be
* no need to call these {@code set*} methods of this builder and the builder can be directly used to build
* mentioned features.
*
* @author Miroslav Fuksa
* @since 2.3
*/
public interface OAuth1Builder {
/**
* Set the signature method name. The signature methods implement
* {@link org.glassfish.jersey.oauth1.signature.OAuth1SignatureMethod} and the name is retrieved from
* {@link org.glassfish.jersey.oauth1.signature.OAuth1SignatureMethod#name()} method. Build-in signature
* methods are {@code HMAC-SHA1}, {@code RSA-SHA1} and {@code PLAINTEXT}.
*
* Default value is {@code HMAC-SHA1}.
*
*
* @param signatureMethod Signature method name.
* @return This builder instance.
*/
public OAuth1Builder signatureMethod(String signatureMethod);
/**
* Set the realm to which the user wants to authenticate. The parameter
* will be sent in Authenticated request and used during Authorization Flow.
*
* @param realm Realm on the server to which the user authentication is required.
* @return This builder instance.
*/
public OAuth1Builder realm(String realm);
/**
* Set the timestamp. The timestamp if defined will be used in {@code Authorization} header. Usually this
* parameter is not defined explicitly by this method and will be automatically filled with the current
* time during the request.
*
* @param timestamp Timestamp value.
* @return This builder instance.
*/
public OAuth1Builder timestamp(String timestamp);
/**
* Set the nonce. Nonce (shortcut of "number used once") is used to uniquely identify the request and
* prevent from multiple usage of the same signed request. The nonce if defined will be used
* in the {@code Authorization} header if defined. Usually this
* parameter is not defined explicitly by this method and will be automatically filled with the randomly
* generated UID during the request.
*
* @param nonce Nonce value.
* @return This builder instance.
*/
public OAuth1Builder nonce(String nonce);
/**
* Set the version of the OAuth protocol. The version, if defined, will be used in the {@code Authorization}
* header otherwise default value {@code 1.1} will be used. Usually this parameter does not need to be
* overwritten by this method.
*
* @param version OAuth protocol version parameter.
* @return This builder instance.
*/
public OAuth1Builder version(String version);
/**
* Get the builder of {@link Feature filter feature}.
*
* @return The builder that can be used to build {@code OAuth1ClientFeature}.
*/
public FilterFeatureBuilder feature();
/**
* Get the builder of {@link OAuth1AuthorizationFlow}.
*
* @param requestTokenUri URI of the endpoint on the Authorization Server where Request Token can be obtained.
* The URI is defined by the Service Provider.
* @param accessTokenUri URI of the endpoint on the Authorization Server where Access Token can be obtained.
* The URI is defined by the Service Provider.
* @param authorizationUri URI of the endpoint on the Authorization Server to which the user (resource owner)
* should be redirected in order to grant access to this application (our consumer).
* The URI is defined by the Service Provider.
* @return The builder that can be used to build {@code OAuth1AuthorizationFlow}.
*/
public FlowBuilder authorizationFlow(String requestTokenUri, String accessTokenUri, String authorizationUri);
/**
* Builder of the {@link javax.ws.rs.core.Feature}.
*/
public static interface FilterFeatureBuilder {
/**
* Set the Access Token that will be used for signing the requests. If this method is not called,
* no access token will be defined in the resulting filter and it will have to be supplied using
* {@link OAuth1ClientSupport#OAUTH_PROPERTY_ACCESS_TOKEN} request property for each request.
* The property could be also used to override settings defined by this method.
*
* @param accessToken Access token.
* @return this builder.
*/
public FilterFeatureBuilder accessToken(AccessToken accessToken);
/**
* Build the {@link Feature oauth 1 filter feature}. The feature can be then registered into the
* client configuration.
*
* @return Client OAuth 1 feature.
*/
public Feature build();
}
/**
* Builder of the {@link OAuth1AuthorizationFlow}.
*/
public static interface FlowBuilder {
/**
* Set the callback URI to which the user (resource owner) should be redirected after he/she
* grants access to this application. In most cases, the URI is under control of this application
* and request done on this URI will be used to extract query parameter {@code verifier} that will be used in
* {@link OAuth1AuthorizationFlow#finish(String)} method.
*
* If URI is not defined by this method, the default value {@code oob} will be used in the Authorization
* Flow which should cause that {@code verifier} will be passed to application in other way than request
* redirection (for example shown to the user using html page).
*
*
* @param callbackUri URI that should receive authorization response from the Service Provider.
* @return this builder.
*/
public FlowBuilder callbackUri(String callbackUri);
/**
* Set the client that should be used internally by the {@code OAuth1AuthorizationFlow} to make requests to
* Authorization Server. If this method is not called, it is up to the implementation to create or get
* any private client instance to perform these requests. This method could be used mainly for
* performance reasons to avoid creation of new client instances and have control about created client
* instances used in the application.
*
* @param client Client instance.
* @return this builder.
*/
public FlowBuilder client(Client client);
/**
* Enable logging (headers and entities) of OAuth requests and responses.
*
* @return this builder.
* @since 2.7
*/
public FlowBuilder enableLogging();
/**
* Build the {@code OAuth1AuthorizationFlow}.
*
* @return Authorization flow.
*/
public OAuth1AuthorizationFlow build();
}
}